Search Results

Search found 9378 results on 376 pages for 'mouse buttons'.

Page 311/376 | < Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >

  • How do I configure WakeOnUSB properly?

    - by wishi
    How do I configure Wake-On-USB properly on a 10.04 or 10.10 Ubuntu (2.6.36 and higher if needed)? (Wake-on-USB is when the computer is asleep and for example a USB Keyboard event wakes up the machine!) The notebook is an Acer Aspire Timeline X 1830T. I don't know in which way the Linux Kernel supports the controllers. There are different ways to approach this, for example /proc/acpi/wakeup... or UDEV... or something with HAL? /proc/acpi/wakeup shows every device in S4, but I need S3. Device S-state Status Sysfs node P0P2 S4 *disabled PEGP S4 *disabled P0P1 S0 *disabled pci:0000:00:1e.0 EHC1 S4 *disabled pci:0000:00:1d.0 USB1 S4 *enabled USB2 S4 *disabled USB3 S4 *disabled USB4 S4 *disabled EHC2 S4 *disabled pci:0000:00:1a.0 USB5 S4 *disabled USB6 S4 *disabled USB7 S4 *disabled HDEF S0 *disabled pci:0000:00:1b.0 RP01 S5 *disabled pci:0000:00:1c.0 PXSX S5 *disabled pci:0000:01:00.0 RP02 S0 *disabled pci:0000:00:1c.1 PXSX S5 *disabled pci:0000:02:00.0 RP03 S0 *disabled PXSX S5 *disabled RP04 S0 *disabled PXSX S5 *disabled RP05 S0 *disabled PXSX S5 *disabled RP07 S0 *disabled PXSX S5 *disabled RP08 S0 *disabled PXSX S5 *disabled GLAN S0 *disabled PEG3 S4 *disabled PEG5 S4 *disabled PEG6 S4 *disabled SLPB S3 *enabled S4, which is Suspend-To-Disk afaik... doesn't seem to work either if I echo USB1 into the wakeup table. It just sets an S4 flag. can I get the USB ports in S3? I want to make the machine wakeup from Suspend-To-Ram (S3, ACPI standard) in case a key on my external keyboard is pressed. It only wakes up if a key on the internal Laptop keyboard is pressed... from Suspend To Ram. It seems if I plug in a USB mouse, that the USB port isn't even powered. I have no BIOS option to change this. Further specific information regarding the device: usb-devices T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 13 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=04d9 ProdID=1603 Rev=03.10 S: Manufacturer= S: Product=USB Keyboard C: #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid root@underwater-laptop:/# lsusb [...] Bus 001 Device 013: ID 04d9:1603 Holtek Semiconductor, Inc. Bus 001 Device 004: ID 0bda:0138 Realtek Semiconductor Corp. Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [...] If this doesn't work I have to properly explain why :( - but I think it is very hard to research this kernel internal. Any hints for good information here? I hope it's possible... I'm just looking for any solution. edit: this, waking up on USB, works on Windows! Thanks a lot, Marius

    Read the article

  • [EF + ORACLE] Updating and Deleting Entities

    - by JTorrecilla
    Prologue In previous chapters we have seen how to insert data through EF, with and without sequences. In this one, we are going to see how to Update and delete Data from the DB. Updating data The update of the Entity Data (properties) is a very common and easy action. Before of change any of the properties of the Entity, we can check the EntityState property, and we can see that is EntityState.Unchanged.   For making an update it is needed to get the Entity which will be modified. In the following example, I use the GetEmployeeByNumber to get a valid Entity: 1: EMPLEADOS emp=GetEmployeeByNumber(2); 2: emp.Name="a"; 3: emp.Phone="2"; 4: emp.Mail="aa"; After modifying the desired properties of the Entity, we are going to check again Entitystate property, which now has the EntityState.Modified value. To persist the changes to the DB is necessary to invoke the SaveChanges function of our context. 1: context.SaveChanges(); After modifying the desired properties of the Entity, we are going to check again Entitystate property, which now has the EntityState.Modified value. To persist the changes to the DB is necessary to invoke the SaveChanges function of our context. If we check again the EntityState property we will see that the value will be EntityState.Unchanged.   Deleting Data Another easy action is to delete an Entity.   The first step to delete an Entity from the DB is to select the entity: 1: CLIENTS selectedClient = GetClientByNumber(15); 2: context.CLIENTES.DeleteObject(clienteSeleccionado); Before invoking the DeleteObject function, we will check EntityStet which value must be EntityState.Unchanged. After deleting the object, the state will be changed to EntitySate.Deleted. To commit the action we have to invoke the SaveChanges function. Aftar that, the EntityState property will be EntityState.Detached. Cascade Entity Framework lets cascade updates and deletes, although I never see cascade updates. What is a cascade delete? A cascade delete is an action that allows to delete all the related object to the object we desire to delete. This option could be established in the DB manager, or it could be in the EF model designer. For example: With a given relation (1-N) between clients and requests. The common situation must be to let delete those clients whose have no requests. If we select the relation between both entities, and press the second mouse button, we can see the properties panel of the relation. The props are: This grid shows the relations indicating the Master table(Clients) and the end point (Cabecera or Requests) The property “End 1 OnDelete” indicates the action to do when a Entity from the Master will be deleted. There are two options: - None: No action will be done, it is said, if a Entity has details entities it could not be deleted. - Cascade: It will delete all related entities to the master Entity. If we enable the cascade delete in a relation, and we invoke the DeleteObject function of the set, we could observe that all the related object indicates a Entitystate.Deleted state. Like an update, insert or common delete, until we commit the changes with SaveChanges function, the data would not be commited. Si habilitamos el borrado en cascada de una relación, e invocamos a la función DeleteObject del conjunto, podremos observar que todas las entidades de Detalle (de la relación indicada) presentan el valor EntityState.Deleted en la propiedad EntityState. Del mismo modo que en el borrado, inserción o actualización, hasta que no se invoque al método SaveChanges, los cambios no van a ser confirmados en la Base de Datos. Finally In this chapter we have seen how to update a Entity, how to delete an Entity and how to implement Cascade Deleting through EF. In next chapters we will see how to query the DB data.

    Read the article

  • Seeking advice on tools and technology for my new game [closed]

    - by k.k. slider
    I'm a C# developer who has been programming a game in my spare time using XNA and Visual Studio. The game's logic is mostly done and I've completed a prototype that has most of the functionality of (what I envision to be) the final game. However, having heard about the uncertain future and (possibly) limited audience for XNA games, I'm looking to switch platforms... but I don't know what technology would best suit my needs. Below are some specifics about my game and what exactly I'm looking for, if you're interested: The game is a 2D turn-based tactical RPG (strategy game) for two players. It is a basic sprite and tile based game with animations and sound. 3D capabilities are not necessary. I'd like to allow players to compete with others online, and have a basic ranking/matchmaking system. I will probably need something that can interact with a server and a database (the game is turn-based and has no RNG, so cheating would be easy to detect even if most computation is done client-side and minimal data is sent to the server). Ideally, I would be able to release an early version of the game and have people give feedback as I develop additional features (similar to Minecraft). I'd prefer to have a way to release periodic updates to the game instead of releasing an absolute final product. To reach the widest possible audience, I'd prefer technology that allows me to release on PC, Android, iOS, and (maybe) Mac. This is a game with simple mouse inputs which can fit on a mobile touch screen. The game should be monetizable. If I find success with this game, then I may consider becoming a full-time indie game developer. I have several other game ideas and have learned quite a bit from my first attempt at game development. My first thought was an F2P/microtransaction model, but I'm open to other suggestions. Language isn't a primary concern of mine, since I have a decent amount of experience using several languages to program large projects. I'm willing to spend money (e.g. on a developer's license), but the more expensive it gets, the more hesitant I am to use it. I've looked into the following solutions... there are a LOT of tools out there... if anyone has experience with any of these and would like to recommend/reject any of them, it would be helpful. C#/.NET (XNA/MonoGame/SDL/SlimDX/Xamarin/ExEn/ANX?) HTML5/JS (AppMobi/PhoneGap/Marmalade/FlashCanvas/Cordova/libRocket?) Python (Pyglet/Pygame/Kivy?) Java (JavaFX/libGDX?) Unity/Construct 2/Cocos2D/NME/Corona/other game creation software? I'd like something that can do 2D and isn't limited by being too high-level. Other languages (Lua/LOVE? Moai?) Thanks for answering this rather long and tedious question...

    Read the article

  • Access Master Page Controls II

    - by Bunch
    Here is another way to access master page controls. This way has a bit less coding then my previous post on the subject. The scenario would be that you have a master page with a few navigation buttons at the top for users to navigate the app. After a button is clicked the corresponding aspx page would load in the ContentPlaceHolder. To make it easier for the users to see what page they are on I wanted the clicked navigation button to change color. This would be a quick visual for the user and is useful when inevitably they are interrupted with something else and cannot get back to what they were doing for a little while. Anyway the code is something like this. Master page: <body>     <form id="form1" runat="server">     <div id="header">     <asp:Panel ID="Panel1" runat="server" CssClass="panelHeader" Width="100%">        <center>            <label style="font-size: large; color: White;">Test Application</label>        </center>       <asp:Button ID="btnPage1" runat="server" Text="Page1" PostBackUrl="~/Page1.aspx" CssClass="navButton"/>       <asp:Button ID="btnPage2" runat="server" Text="Page2" PostBackUrl="~/Page2.aspx" CssClass="navButton"/>       <br />     </asp:Panel>     <br />     </div>     <div>         <asp:scriptmanager ID="Scriptmanager1" runat="server"></asp:scriptmanager>         <asp:ContentPlaceHolder id="ContentPlaceHolder1" runat="server">         </asp:ContentPlaceHolder>     </div>     </form> </body> Page 1: VB Protected Sub Page_Load(ByVal sender As Object, ByVal e As System.EventArgs) Handles Me.Load     Dim clickedButton As Button = Master.FindControl("btnPage1")     clickedButton.CssClass = "navButtonClicked" End Sub CSharp protected void Page_Load(object sender, EventArgs e) {     Button clickedButton;     clickedButton = (Button)Master.FindControl("btnPage1");     clickedButton.CssClass = "navButtonClicked"; } CSS: .navButton {     background-color: White;     border: 1px #4e667d solid;     color: #2275a7;     display: inline;     line-height: 1.35em;     text-decoration: none;     white-space: nowrap;     width: 100px;     text-align: center;     margin-bottom: 10px;     margin-left: 5px;     height: 30px; } .navButtonClicked {     background-color:#FFFF86;     border: 1px #4e667d solid;     color: #2275a7;     display: inline;     line-height: 1.35em;     text-decoration: none;     white-space: nowrap;     width: 100px;     text-align: center;     margin-bottom: 10px;     margin-left: 5px;     height: 30px; } The idea is pretty simple, use FindControl for the master page in the page load of your aspx page. In the example I changed the CssClass for the aspx page's corresponding button to navButtonClicked which has a different background-color and makes the clicked button stand out. Technorati Tags: ASP.Net,CSS,CSharp,VB.Net

    Read the article

  • Does Jquery and Mootools usually have conflict if both are used on a webpage? [migrated]

    - by Charming Prince
    I have this website am designing, i tried using mootools 1.31 to animate some of the div boxes when clicked or when the mouse hover rounds it, to shows the content. the thing is that it doesn't seem to work on the webpage, but if i try the same script on a blank webpage it works, am thinking probably it's because i have Jquery 1.52 on the same page and maybe both scripts are conflicting with each other because, if i remove the Jquery, the Mootools works. What should be my option, because i need the Jquery to do some validations for me, so i can't remove it completely. Here are the codes <script> //-vertical var mySlide = new Fx.Slide('test'); $('slidein').addEvent('click', function(e){ e = new Event(e); mySlide.slideIn(); e.stop(); }); $('slideout').addEvent('click', function(e){ e = new Event(e); mySlide.slideOut(); e.stop(); }); $('toggle').addEvent('click', function(e){ e = new Event(e); mySlide.toggle(); e.stop(); }); $('hide').addEvent('click', function(e){ e = new Event(e); mySlide.hide(); e.stop(); }); </script> here's the HTML <html> <h3 class="section">Fx.Slide Vertical</h3> <a id="slideout" href="#">slideout</a> | <a id="slidein" href="#">slidein</a> | <a id="toggle" href="#"> toggle</a> | <a id="hide" href="#">hide</a> <div id="test"> Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad mi nim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum. </div> Here's the CSS #test { background: #222; color: #fff; padding: 10px; margin: 20px; border: 10px solid pink; } #test2 { background: #222; color: #fff; padding: 10px; margin: 20px; border: 10px solid pink; } Am using the exact same code supplied by Mootools in their own example, if i do this on a blank webpage it works but incorporated into my own webpage, it doesn't, and my own page just have the script tag of the Jquery in the head section of the HTML.

    Read the article

  • WF4 &ndash; Guess the number game!

    - by MarkPearl
    I posted yesterday how really good WF4 was looking. Today I thought I would show some real basics that I was able to figure out. This will be a simple example, I am going to make a flowchart workflow – which will prompt the user to guess the number until they guess the right number. Lets begin… Make a new project and make it a Workflow console Application. Then select the Workflow file and drag a FlowChart (2) to point 3. This will now show a green start circle in the designer form. We are going to work with primitives to start with. We are now going to drag a few objects onto the Workflow, We drag the WriteLine, Assign & Decision items onto the designer. Once they are dragged onto the designer we will want to link them up. The order that they are linked is critical since this will determine the order of the solution. In this case, we want the system to first ask “Guess a number”, then to wait for the user to input some code, and then to display “You got it” if they got it right, and “Try again” if they got it wrong. So we now link the arrows to the objects. This is done by moving the mouse pointer over the start objects and clicking on one of the toggles and then dragging it to the next object and releasing the button over one of the toggles. This will place an arrow from the source object to the target object. Okay… pretty simple stuff – now we just need these primitive objects to do stuff. Lets start with the WriteLine primitive. We place the text in inverted commas in the Text field. Because this field accepts any valid VB expression we could have put variables etc. in there if we wanted to. The next thing we want to do is allow the user to input a number. This brings up an interesting problem, if a user were to type in a number, there would need to be someway to declare a variable to hold that value for the life of the workflow. We can achieve this by declaring a variable. To declare a variable, move your cursor over the variables tab at the bottom of the workflow, and then type the name of the new variable in the “Create Variable” field and set it as shown in the image above. Now that we have a variable, we want to call the Console.Readline method and assign the inputted value from the Console to that variable. The code that cannot be seen is actually this – Convert.ToInt32(Console.ReadLine()) We now have a workflow that first prompts the user for a number, then allows the user to type in a number. We are almost done, we just need to make the system react to the value inputted. There are a few ways we could do this, I am going to use the Decision item. So select the Decision object on the designer and then view its properties (F4 for me), and in the condition field place a condition. For simplicity sake I have decided that if the user guesses 10, they will have guessed the number. This is now the completed workflow. Its really easy to understand and shows some really powerful principles for Business applications. You can run the application and see what it does. Imagine writing business solutions that do not worry about the exact flow of objects, but simply allows a business analyst or someone to configure the solution to work exactly as the business rules would dictate. And if the rules changed six months later all they would need to do is re-drag some of the flows. Now I do not know if WF4 will allow for this, but it feels like it is a step in the right direct.

    Read the article

  • The World of SQL Database Deployment

    - by GGBlogger
    In my early development days, I used Microsoft Access for building databases. It made things easy since I only needed to package the database with the installation package so my clients would have access to it. When we began the development of a new package in Visual Studio .NET I decided to use SQL Server Express. It was free and provided good tools - also free. I thought it was a tremendous idea until it came time to distribute our new software! What a surprise. The nightmare Ah, the choices! Detach the database and have the client reattach it to a newly installed – oh wait. FIRST my new client needs to download and install SQL Server Express with SQL Server Management Studio. That’s not a great thing, but it is one more nightmare step for users who may have other versions of SQL installed. Then the question became – do we detach and reattach or do we do a backup. It was too late (bad planning) to revert to Microsoft Access but we badly needed a simple way to package and distribute both the database AND sample contents. Red Gate to the rescue It took me a while to find an answer but I did find it in a package called SQL Packager sold by a relatively unpublicized company in England called Red Gate. They call their products “ingeniously simple” and I must agree with that description. With SQL Packager you point to the database (more in a minute) you want to distribute. A few mouse clicks and dialogs and you have an executable file that you can ship virtually anywhere and virtually any way which, when run, installs the database on your destination SQL Server instance! It really is that simple. Easier to show than tell Let’s explore a hypothetical case. Let’s say you have a local SQL database of customers and you have decided you want to share it with your subsidiaries or partners. Here is the underlying screen you will see on starting SQL Packager. There are a bunch of possibilities here but I’m going to keep this relatively simple. At this point I simply want to illustrate the simplicity of generating an executable to deliver your database. You will notice that you can set up a new package, edit an existing package or change a bunch of options. Start SQL packager And the following is the default dialog you get on startup. In the next dialog, I’ve selected the Server and Database. I’ve also selected Windows Authentication. Pressing Next causes SQL Packager to run a number of checks and produce a report. Now you’re given a comprehensive list of what is going to be packaged and you’re allowed to change it if you desire. I’ve never made any changes here so I can’t really make any suggestions. The just illustrates the comprehensive nature of so many Red Gate products including this one. Clicking Next gives you still further options. SQL Packager then works its magic and shows you a dialog with the results. Packager then gives you a dialog of the scripts it has generated. The capture above only shows 1 of 4 tabs. Finally pressing Next gives you the option to generate a .NET executable of a C# project. I’ve only generated an executable so I’m not in a position to tell you what the C# project looks like. That may be the subject of further discussions. You can rename the package and tell SQL Packager where to save it. I’ve skipped a lot but this will serve to illustrate the comprehensive (and ingenious) things Red Gate does. All in all, it’s a superb way to distribute populated SQL databases. Oh – we’ll save running the resulting executable for later also but believe me it’s insanely simple.

    Read the article

  • Bowing to User Experience

    As a consumer of geeky news it is hard to check my Google Reader without running into two or three posts about Apples iPad and in particular the changes to the developer guidelines which seemingly restrict developers to using Apples Xcode tool and Objective-C language for iPad apps. One of the alternatives to Objective-C affected, is MonoTouch, an option with some appeal to me as it is based on the Mono implementation of C#. Seemingly restricted is the key word here, as far as I can tell, no official announcement has been made about its fate. For more details around MonoTouch for iPhone OS, check out Miguel de Icazas post: http://tirania.org/blog/archive/2010/Apr-28.html. These restrictions have provoked some outrage as the perception is that Apple is arrogantly restricting developers freedom to create applications as they choose and perhaps unwittingly shortchanging iPhone/iPad users who wont benefit from these now never-to-be-made great applications. Apples response has mostly been to say they are concentrating on providing a certain user experience to their customers, and to do this, they insist everyone uses the tools they approve. Which isnt a surprising line of reasoning given Apple restricts the hardware used and content of the apps already. The vogue term for this approach is curated, as in a benevolent museum director selecting only the finest artifacts for display or a wise gardener arranging the plants in a garden just so. If this is what a curated experience is like it is hard to argue that consumers are not responding. My iPhone is probably the most satisfying piece of technology I own. Coming from the Razr, it really was an revolution in how the form factor, interface and user experience all tied together. While the curated approach reinvented the smart phone genre, it is easy to forget that this is not a new approach for Apple. Macbooks and Macs are Apple hardware that run Apple software. And theyve been successful, but not quite in the same way as the iPhone or iPad (based on early indications). Why not? Well a curated approach can only be wildly successful if the curator a) makes the right choices and b) offers choices that no one else has. Although its advantages are eroding, the iPhone was different from other phones, a unique, focused, touch-centric experience. The iPad is an attempt to define another category of computing. Macs and Macbooks are great devices, but are not fundamentally a different user experience than a PC, you still have windows, file folders, mouse and keyboard, and similar applications. So the big question for Apple is can they hold on to their market advantage, continuing innovating in user experience and stay on top? Or are they going be like Xerox, and the rest of the world says thank you for the windows metaphor, now let me implement that better? It will be exciting to watch, with Android already a viable competitor and Microsoft readying Windows Phone 7. And to close the loop back to the restrictions on developing for iPhone OS. At this point the main target appears to be Adobe and Adobe Flash. Apples calculation is that a) they dont need those developers or b) the developers they want will learn Apples stuff anyway. My guess is that they are correct; that as much as I like the idea of developers having more options, I am not going to buy a competitors product to spite Apple unless that product is just as usable. For a non-technical consumer, I dont know that this conversation even factors into the buying decision. If it did, wed be talking about how Microsoft is trying to retake a slice of market share from the behemoth that is Linux.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Gnome-shell fails to load on 12.10

    - by Githlar
    I'm usually the one answering questions, but in this I'm throughly stumped! My Setup: Ubuntu 12.10 (Dist upgrade form 12.04) ATI M96 [Mobility Radeon HD 4650] Upon the first installation of 12.10 I had all kinds of issues getting the Legacy ATI drivers to install (I guess the source for the drivers isn't kosher with kernel 3.5). So, I added the repository ppa:makson96/fglrx - which has a version of the ATI source patched to work with kernel 3.5. After installation of fglrx-legacy from that PPA, gnome-shell and all my graphics work fine... until today. The Problem I unsuspended my computer today and the screen was black (not off, the black from the gnome lock screen). I'd move my mouse/hit a key and the background would flash and then it'd go back to black. Restarted via VT1 Logged into Gnome (gnome-shell) session, but no gnome-shell! Investigation: First, I went to VT1 and tried export DISPLAY=:0;gnome-shell --replace. It appeared to work fine, switch back to X and nothing. Went back to VT1 and saw this error message: JS ERROR: !!! Exception was: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO JS ERROR: !!! message = '"Object 0x7fc748129c30 is not a subclass of (null), it's a xO"' JS ERROR: !!! fileName = '"/usr/share/gnome-shell/js/ui/tweener.js"' JS ERROR: !!! lineNumber = '218' JS ERROR: !!! stack = '"()@/usr/share/gnome-shell/js/ui/tweener.js:218 wrapper()@/usr/share/gjs-1.0/lang.js:204 ()@/usr/share/gjs-1.0/lang.js:145 ()@/usr/share/gjs-1.0/lang.js:239 init()@/usr/share/gnome-shell/js/ui/tweener.js:49 init()@/usr/share/gnome-shell/js/ui/environment.js:96 @<main>:1 "' Window manager warning: Log level 32: Execution of main.js threw exception: TypeError: Object 0x7fc748129c30 is not a subclass of (null), it's a xO Note: Everywhere it says "it's a xO", xO is actually garbled and changes every time (I'm thinking memory corruption?) This error is thrown by line 96 of /usr/share/gnome-shell/js/ui/environment.js: tweener.Init() Did a purge of fglrx-legacy, reboot, reinstall fglrx-legacy, reboot... same thing. Did a ppa-purge of ppa:gnome3-team/gnome3, and reinstalled gnome-shell and ubuntu-desktop from the standard repositores... same thing. I'm really at a loss here. I love gnome-shell and after using it for nearly a year now gnome classic just seems so archaic. Additional Information Apt log from the day I first suspended my machine (these are upgrades from the gnome3-team/gnome3 ppa and ubuntu-wine/ppa ppa): Start-Date: 2012-11-24 17:30:28 Commandline: aptdaemon role='role-commit-packages' sender=':1.618' Install: gkbd-capplet:amd64 (3.6.0-0ubuntu1), gnome-control-center-unity:amd64 (1.0-0ubuntu1~ubuntu12.10.1) Upgrade: nautilus:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), libgnome-control-center1:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), wine1.5-i386:i386 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), wine1.5:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), gnome-settings-daemon:amd64 (3.4.2-0ubuntu14, 3.6.3-0ubuntu1~ubuntu12.10.1), gnome-control-center-data:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), gnome-accessibility-themes:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), gnome-themes-standard:amd64 (3.6.0.2-0ubuntu1, 3.6.2-0ubuntu2~ubuntu12.10.1), wine1.5-amd64:amd64 (1.5.17-0ubuntu4, 1.5.18-0ubuntu1), nautilus-data:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1), gnome-control-center:amd64 (3.4.2-0ubuntu19, 3.6.3-0ubuntu6~ubuntu12.10.1), libnautilus-extension1a:amd64 (3.6.2-0ubuntu0.1~quantal1, 3.6.3-0ubuntu2~ubuntu12.10.1) End-Date: 2012-11-24 17:31:32 fglrxinfo (driver appears to be working): display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 4650 OpenGL version string: 3.3.11653 Compatibility Profile Context Does anybody have any further ideas?

    Read the article

  • Problem with sprite direction and rotation

    - by user2236165
    I have a sprite called Tool that moves with a speed represented as a float and in a direction represented as a Vector2. When I click the mouse on the screen the sprite change its direction and starts to move towards the mouseclick. In addition to that I rotate the sprite so that it is facing in the direction it is heading. However, when I add a camera that is suppose to follow the sprite so that the sprite is always centered on the screen, the sprite won't move in the given direction and the rotation isn't accurate anymore. This only happens when I add the Camera.View in the spriteBatch.Begin(). I was hoping anyone could maybe shed a light on what I am missing in my code, that would be highly appreciated. Here is the camera class i use: public class Camera { private const float zoomUpperLimit = 1.5f; private const float zoomLowerLimit = 0.1f; private float _zoom; private Vector2 _pos; private int ViewportWidth, ViewportHeight; #region Properties public float Zoom { get { return _zoom; } set { _zoom = value; if (_zoom < zoomLowerLimit) _zoom = zoomLowerLimit; if (_zoom > zoomUpperLimit) _zoom = zoomUpperLimit; } } public Rectangle Viewport { get { int width = (int)((ViewportWidth / _zoom)); int height = (int)((ViewportHeight / _zoom)); return new Rectangle((int)(_pos.X - width / 2), (int)(_pos.Y - height / 2), width, height); } } public void Move(Vector2 amount) { _pos += amount; } public Vector2 Position { get { return _pos; } set { _pos = value; } } public Matrix View { get { return Matrix.CreateTranslation(new Vector3(-_pos.X, -_pos.Y, 0)) * Matrix.CreateScale(new Vector3(Zoom, Zoom, 1)) * Matrix.CreateTranslation(new Vector3(ViewportWidth * 0.5f, ViewportHeight * 0.5f, 0)); } } #endregion public Camera(Viewport viewport, float initialZoom) { _zoom = initialZoom; _pos = Vector2.Zero; ViewportWidth = viewport.Width; ViewportHeight = viewport.Height; } } And here is my Update and Draw-method: protected override void Update (GameTime gameTime) { float elapsed = (float)gameTime.ElapsedGameTime.TotalSeconds; TouchCollection touchCollection = TouchPanel.GetState (); foreach (TouchLocation tl in touchCollection) { if (tl.State == TouchLocationState.Pressed || tl.State == TouchLocationState.Moved) { //direction the tool shall move towards direction = touchCollection [0].Position - toolPos; if (direction != Vector2.Zero) { direction.Normalize (); } //change the direction the tool is moving and find the rotationangle the texture must rotate to point in given direction toolPos += (direction * speed * elapsed); RotationAngle = (float)Math.Atan2 (direction.Y, direction.X); } } if (direction != Vector2.Zero) { direction.Normalize (); } //move tool in given direction toolPos += (direction * speed * elapsed); //change cameracentre to the tools position Camera.Position = toolPos; base.Update (gameTime); } protected override void Draw (GameTime gameTime) { graphics.GraphicsDevice.Clear (Color.Blue); spriteBatch.Begin (SpriteSortMode.BackToFront, BlendState.AlphaBlend, null, null, null, null, Camera.View); spriteBatch.Draw (tool, new Vector2 (toolPos.X, toolPos.Y), null, Color.White, RotationAngle, originOfToolTexture, 1, SpriteEffects.None, 1); spriteBatch.End (); base.Draw (gameTime); }

    Read the article

  • XNA WP7 Texture memory and ContentManager

    - by jlongstreet
    I'm trying to get my WP7 XNA game's memory under control and under the 90MB limit for submission. One target I identified was UI textures, especially fullscreen ones, that would never get unloaded. So I moved UI texture loads to their own ContentManager so I can unload them. However, this doesn't seem to affect the value of Microsoft.Phone.Info.DeviceExtendedProperties.GetValue("ApplicationCurrentMemoryUsage"), so it doesn't look like the memory is actually being released. Example: splash screens. In Game.LoadContent(): Application.Instance.SetContentManager("UI"); // set the current content manager for (int i = 0; i < mSplashTextures.Length; ++i) { // load the splash textures mSplashTextures[i] = Application.Instance.Content.Load<Texture2D>(msSplashTextureNames[i]); } // set the content manager back to the global one Application.Instance.SetContentManager("Global"); When the initial load is done and the title screen starts, I do: Application.Instance.GetContentManager("UI").Unload(); The three textures take about 6.5 MB of memory. Before unloading the UI ContentManager, I see that ApplicationCurrentMemoryUsage is at 34.29 MB. After unloading the ContentManager (and doing a full GC.Collect()), it's still at 34.29 MB. But after that, I load another fullscreen texture (for the title screen background) and memory usage still doesn't change. Could it be keeping the memory for these textures allocated and reusing it? edit: very simple test: protected override void LoadContent() { // Create a new SpriteBatch, which can be used to draw textures. spriteBatch = new SpriteBatch(GraphicsDevice); PrintMemUsage("Before texture load: "); // TODO: use this.Content to load your game content here red = this.Content.Load<Texture2D>("Untitled"); PrintMemUsage("After texture load: "); } private void PrintMemUsage(string tag) { Debug.WriteLine(tag + Microsoft.Phone.Info.DeviceExtendedProperties.GetValue("ApplicationCurrentMemoryUsage")); } protected override void Update(GameTime gameTime) { // Allows the game to exit if (GamePad.GetState(PlayerIndex.One).Buttons.Back == ButtonState.Pressed) this.Exit(); // TODO: Add your update logic here if (count++ == 100) { GC.Collect(); GC.WaitForPendingFinalizers(); PrintMemUsage("Before CM unload: "); this.Content.Dispose(); GC.Collect(); GC.WaitForPendingFinalizers(); PrintMemUsage("After CM unload: "); red = null; spriteBatch.Dispose(); GC.Collect(); GC.WaitForPendingFinalizers(); PrintMemUsage("After SpriteBatch Dispose(): "); } base.Update(gameTime); } protected override void Draw(GameTime gameTime) { GraphicsDevice.Clear(Color.CornflowerBlue); // TODO: Add your drawing code here if (red != null) { spriteBatch.Begin(); spriteBatch.Draw(red, new Vector2(0,0), Color.White); spriteBatch.End(); } base.Draw(gameTime); } This prints something like (it changes every time): Before texture load: 7532544 After texture load: 10727424 Before CM unload: 9875456 After CM unload: 9953280 After SpriteBatch Dispose(): 9953280

    Read the article

  • Software and/(x)or Hardware Projects for Pre-School Kids

    - by haylem
    I offered to participate at my kid's pre-school for various activities (yes, I'm crazy like that), and one of them is to help them discover extra-curricular (big word for a pre-school, but by lack of a better one... :)) hobbies, which may or may not relate to a professional activity. At first I thought that it wouldn't be really easy to have pre-schoolers relate to programming or the internal workings of a computer system in general (and I'm more used to teaching middle-school to university-level students), but then I thought there must be a way. So I'm trying to figure out ways to introduce very young kids (3yo) to computer systems in a fun and preferably educational way. Of course, I don't expect them to start smashing the stack for fun and profit right away (or at least not voluntarily, though I could use the occasion for some toddler tests...), but I'm confident there must be ways to get them interested in both: using the systems, becoming curious about understanding what they do, interacting with the systems to modify them. I guess this setting is not really relevant after all, it's pretty much the same as if you were aiming to achieve the same for your own kids at home. Ideas Considering we're talking 3yo pre-schoolers here, and that at this age some kids are already quite confident using a mouse (some even a keyboard, if not for typing, at least to press some buttons they've come to associate with actions) while others have not yet had any interaction with computers of any kind, it needs to be: rather basic, demonstrated and played with in less then 5 or 10 minutes, doable in in groups or alone, scalable and extendable in complexity to accommodate their varying abilities. The obvious options are: basic smallish games to play with, interactive systems like LOGO, Kojo, Squeak and clones (possibly even simpler than that), or thngs like Lego Systems. I guess it can be a thing to reflect on both at the software and the hardware levels: it could be done with a desktop or laptop machine, a tablet, a smartphone (or a crap-phone, for that matter, as long as you can modify it), or even get down to building something from scratch (Raspberry Pi and Arduino being popular options at the moment). I can probably be in the form of games, funny visualizations (which are pretty much games) w/ Prototype, virtual worlds to explore. I also thought on the moment (and I hope this won't offend anyone) that some approaches to teaching pets could work (reward systems, haptic feedback and such things could quickly point a kid in the right direction to understanding how things work, in a similar fashion - I'm not suggesting to shock the kids!). Hmm, Is There an Actual Question in There? What type of systems do you think might be a good fit, both in terms of hardware and software? Do you have seen such systems, or have anything in mind to work on? Are you aware of some research in this domain, with tangible results? Any input is welcome. It's not that I don't see options: there are tons, but I have a harder time pinpointing a more concrete and definite type of project/activity, so I figure some have valuable ideas or existing ones. Note: I am not advocating that every kid should learn to program, be interested in computer systems, or that all of them in a class would even care enough to follow such an introduction with more than a blank stare. I don't buy into the "everybody would benefit from learning to program" thing. Wouldn't hurt, but not necessary in any way. But if I can walk out of there with a few of them having smiled using the thing (or heck, cried because others took them away from them), that'd be good enough. Related Questions I've seen and that seem to complement what I'm looking for, but not exactly for the same age groups or with the same goals: Teaching Programming to Kids Recommendations for teaching kids math concepts & skills for programming?

    Read the article

  • 12.10 unable to install or even run from Live CD with nVidia GTX 580

    - by user99056
    I've used Ubuntu in the past (set up as web server, etc over in Iraq), so I'm not a 100% Linux Noob, however, I'm running into a brick wall here. I've got a machine I built when I got back to the US earlier this year, running Windows 7 Ultimate on it, and I've now got some free time and would like to transition over to Ubuntu full time. I've searched around in the forums, and there seems to be an issue with the nVidia graphics cards, so I've tried going to the EVGA site to see if I could find a new BIOS update for it and had no luck, so I'm back searching the forums here again and decided to just go ahead and post my question. My apologies if this is covered in another post and I was just unable to find it. I've found a few 'similar' posts, but nothing as bad as my issue. With the history aside, here is the actual detailed issue: I purchased a new SSD (Intel 520 SSD), arrived today, and I disconnect my old Windows 7 SSD. I had pre downloaded the ubuntu-12.10-desktop-amd64 earlier today and burned it to DVD. Upon inserting the Live CD into the computer and booting up, everything was fine up to the 'Run From Live CD' or 'Install Ubuntu Now' buttons. As I was sure I wanted to go ahead and make the switch, I selected the 'Install Now' from the right hand side. CD Spins up, black window pops up, and then the errors started: date/time GPU Lockup date/time Failed to idle channel 1 date/time PFIFO - playlist update failed date/time Failed to idle channel 2 date/time PFIFO - playlist update failed Thinking it might correct itself, I let it run and it would swap over to a GUI Screen that was locked up with major blurring/etc, then back to the command line with the errors. Eventually it said something along the lines of 'unknown status' and switched back to the GUI and froze. So, that's when I tried to see if I could find a BIOS upgrade for the nVidia GTX580 cards, and had no luck. So I thought, why not try to just run it from the Live CD and see if I can at least get a look at it, maybe if I could get it running try to do some sort of install from there and fix the driver issue. I rebooted, brought up the Live CD, and this time chose the left option / run from the CD. It brought me all the way in to the desktop, I saw my drives, the other icons, could move the mouse, etc for about 30 seconds and then it locked up completely. I've tried this a couple of times and get the same results every time. Hardware: Intel i7-3930K CPU @ 3.2GHz (12 CPUs) / MSI MS-7760 Motherboard / 32GB RAM / 2 x EVGA (nVidia) GeForce GTX 580 (4GB Ram each) So the question is: Is there any way to install 12.10 if you can't even get the Live CD to run (for more than 30 seconds)? My current hardware configuration is both of the GTX 580 cards have an SLI jumper on them, and I have 2 monitors on each card. (Ubuntu info obviously only shows on the main monitor from the failed installation and the attempt at running the Live CD). Perhaps opening the machine back up and removing the SLI Jumper and removing the other 3 monitors (so it only would have 1 video card with one monitor on it) would actually allow me to get 12.10 installed, then I could work on an nVidia Video Driver fix for the GTX 580, and then possibly hook up the other video card and monitors? Or is this something that they are currently aware of and may update with a future release in the next few days/weeks? Any thoughts or suggestions would be greatly appreciated, as I can't even try to fix the issue (assuming it is the nVidia drivers) if I can't even get it to install at all.

    Read the article

  • My Favorite Free Windows Phone Twitter App

    - by Tim Murphy
    Windows Phone 7 has been out for about two years now.  In that time I have switched back and forth with different free Twitter apps.  Mostly the has been because someone has mentioned one or another that they like.  I figured I would give a quick run down of what I felt were the pros and cons of each.  These are only the ones that I have used and your mileage may vary.  So here we go. WP7 Built-In Twitter Functionality While it is great that Microsoft put this functionality in, it is extremely limited in usefulness.  Some apps leverage it to allow you to share pictures or information they contain.  In all though, I don’t use it unless it is the quickest way to get something out. Official Twitter App The official Twitter app isn’t a very big step up from the phone functionality.  It gives you a better timeline view and better attachment handling, but it makes you bounce to a browser page to see images that are linked to a tweet. TweetCaster This was my main Twitter app for quite a while.  It is the only one with InstaPaper integration so that you can save you a tweet and review it later.  My main problem is that it crashes too much when it can’t find a connection.  It also only previews yfrog and twitpic images and only once you go to the detail of a tweet.  Other than that it is a solid Twitter client. moTweets This is my current favorite. It has nice image display in your timeline which I have not seen on any of the other apps.  There are two modes that you can use with this app.  The first is standard to most Twitter apps that allows you to navigate to a tweet and do the usual operations.  The second is what they call Quick Buttons.  In this case you do not see the content of the tweet but go straight to the let’s get something done stage.  It is an interesting take.  I do miss the Instapaper integration and it has a tendency to show a blank timeline list once in a while after you view detail entry.  If you scroll the list it restore your timeline, but you lose you place and are put to the first entry. Seesmic I am not very fond of this app.  The first thing is that it makes you pick a “Space” when you enter the app.  This is really “which account do you want to see”.  On top of that it does not show who retweeted an entry in your timeline and then only tells you how many people RT the post when you look at the detail.  There is a Speak feature that will read you a single tweet, but you have to navigate to the tweet and then to a menu to make it work.  We will have to see if this gets better with the features in Windows Phone 8.  Other than that it is another basic feature app.  Summary In the end I am sticking with moTweets.  I would appreciate it if they added the Instapaper capability and fixed the one bug.  If they did that I would be really happy with the product. del.icio.us Tags: Twitter,Windows Phone 7,WP7,TweetCaster,moTweets,Seesmic

    Read the article

  • Passing a parameter using RelayCommand defined in the ViewModel (from Josh Smith example)

    - by eesh
    I would like to pass a parameter defined in the XAML (View) of my application to the ViewModel class by using the RelayCommand. I followed Josh Smith's excellent article on MVVM and have implemented the following. XAML Code <Button Command="{Binding Path=ACommandWithAParameter}" CommandParameter="Orange" HorizontalAlignment="Left" Style="{DynamicResource SimpleButton}" VerticalAlignment="Top" Content="Button"/> ViewModel Code public RelayCommand _aCommandWithAParameter; /// <summary> /// Returns a command with a parameter /// </summary> public RelayCommand ACommandWithAParameter { get { if (_aCommandWithAParameter == null) { _aCommandWithAParameter = new RelayCommand( param => this.CommandWithAParameter("Apple") ); } return _aCommandWithAParameter; } } public void CommandWithAParameter(String aParameter) { String theParameter = aParameter; } #endregion I set a breakpoint in the CommandWithAParameter method and observed that aParameter was set to "Apple", and not "Orange". This seems obvious as the method CommandWithAParameter is being called with the literal String "Apple". However, looking up the execution stack, I can see that "Orange", the CommandParameter I set in the XAML is the parameter value for RelayCommand implemenation of the ICommand Execute interface method. That is the value of parameter in the method below of the execution stack is "Orange", public void Execute(object parameter) { _execute(parameter); } What I am trying to figure out is how to create the RelayCommand ACommandWithAParameter property such that it can call the CommandWithAParameter method with the CommandParameter "Orange" defined in the XAML. Is there a way to do this? Why do I want to do this? Part of "On The Fly Localization" In my particular implementation I want to create a SetLanguage RelayCommand that can be bound to multiple buttons. I would like to pass the two character language identifier ("en", "es", "ja", etc) as the CommandParameter and have that be defined for each "set language" button defined in the XAML. I want to avoid having to create a SetLanguageToXXX command for each language supporting and hard coding the two character language identifier into each RelayCommand in the ViewModel.

    Read the article

  • WPF blinking textblock

    - by Tan
    Hi iam trying to make an Wpf TextBlock to blink. I want like when im clicking on an button then the textblock blink. How can i achive this. I have tryid the fallowing. <TextBlock Name="txtBlockScannerText" Margin="10,0,0,0" Style="{StaticResource TextBlockNormal}" Text="Skanna Inleverans listan"> <TextBlock.Triggers> <EventTrigger RoutedEvent="TextBlock.MouseEnter"> <EventTrigger.Actions> <BeginStoryboard> <Storyboard BeginTime="00:00:00" RepeatBehavior="Forever" Storyboard.TargetName="txtBlockScannerText" Storyboard.TargetProperty="(Foreground).(SolidColorBrush.Color)"> <ColorAnimation From="Black" To="Red" Duration="0:0:1"/> </Storyboard> </BeginStoryboard> </EventTrigger.Actions> </EventTrigger> </TextBlock.Triggers> </TextBlock> But with this code it only blinks when my mouse enter it. How can i trigger the blink in an button click event. Or how do i call the event to blink. Thanks for help

    Read the article

  • Using MVVM, how to pass SelectedItems of a XamDataGrid as parameter to the Command raised by the Co

    - by saddaypally
    Hi, I'm trying to pass the item on XamDataGrid on which I do a mouse right click to open a ContextMenu, which raises a Command in my ViewModel. Somehow the method that the Command calls is not reachable in debug mode. This is the snipped from the view <ig:XamDataGrid DataSource="{Binding DrdResults}" Height="700" Width="600"> <ig:XamDataGrid.ContextMenu> <ContextMenu DataContext="{Binding RelativeSource={RelativeSource Mode=Self}, Path=PlacementTarget.DataContext}" AllowDrop="True" Name="cmAudit"> <MenuItem Header="View History" Command="{Binding ViewTradeHistory}" CommandParameter="{Binding Path=SelectedItems}"> </MenuItem> </ContextMenu> </ig:XamDataGrid.ContextMenu> <ig:XamDataGrid.FieldSettings> <ig:FieldSettings AllowFixing="NearOrFar" AllowEdit="False" Width="auto" Height="auto" /> </ig:XamDataGrid.FieldSettings> </ig:XamDataGrid> My code in the corresponding ViewModel for this View is as follows public WPF.ICommand ViewTradeHistory { get { if (_viewTradeHistory == null) { _viewTradeHistory = new DelegateCommand( (object SelectedItems) = { this.OpenTradeHistory(SelectedItems); }); } return _viewTradeHistory; } } And lastly the actual method that gets called by the Command is as below private void OpenTradeHistory(object records) { DataPresenterBase.SelectedItemHolder auditRecords = (DataPresenterBase.SelectedItemHolder)records; // Do something with the auditRecords now. } I'm not sure what am I doing incorrectly here. Any help will be very much appreciated. Thanks, Shravan

    Read the article

  • Is it possible for a WPF control to have an ActualWidth and ActualHeight if it has never been render

    - by DanM
    I need a Viewport3D for the sole purpose of doing geometric calculations using Petzold.Media3D.ViewportInfo. I do now want to place it in a Window. I'm creating a Viewport3D using the following code: private Viewport3D CreateViewport(MainSettings settings) { var cameraPosition = new Point3D(0, 0, settings.CameraHeight); var cameraLookDirection = new Vector3D(0, 0, -1); var cameraUpDirection = new Vector3D(0, 1, 0); var camera = new PerspectiveCamera { Position = cameraPosition, LookDirection = cameraLookDirection, UpDirection = cameraUpDirection }; var viewport = new Viewport3D { Camera = camera, Width = settings.ViewportWidth, Height = settings.ViewportHeight }; return viewport; } Later, I'm attempting to use this viewport to convert the mouse location to a 3D location using this method: public Point3D? Point2dToPoint3d(Point point) { var range = new LineRange(); var isValid = ViewportInfo.Point2DtoPoint3D(_viewport, point, out range); if (isValid) return range.PointFromZ(0); else return null; } Unfortunately, it's not working. I think the reason is that the ActualWidth and ActualHeight of the viewport and both zero (and these are read-only properties, so I can't set them manually). (I have tested the exact same with an actual rendered Viewport3D, so I know the issue is not with my converter method.) Any idea how I can get WPF to assign the ActualWidth and ActualHeight based on my Width and Height settings? I tried setting the HorizontalAlignment and VerticalAlignment to Left and Top, respectively, and I also messed with the MinWidth and MinHeight, but none of these properties had any effect on the ActualWidth or ActualHeight.

    Read the article

  • What is a good alternative to the WPF WebBrowser Control?

    - by VoidDweller
    I have an MDI WPF app that I need to add web content to. At first, great it looks like I have 2 options built into the framework the Frame control and the WebBrowser control. Given that this is an MDI app it doesn't take long to discover that neither of these will work. The WPF WebBrowser control wraps up the IE WebBrowser ActiveX Control which uses the Win32 graphics pipeline. The "Airspace" issue pretty much sums this up as "Sorry, the layouts will not play nice together". Yes, I have thought about taking snapshots of the web content rendering these and mapping the mouse and keyboard events back to the browser control, but I can't afford the performance penalty and I really don't have time to write and thoroughly test it. I have looked for third party controls, but so far I have only found Chris Cavanagh's WPF Chromium Web Browser control. Which wraps up Awesomium 1.5. Together these are very cool, they play nice with the WPF layouts. But they do not meet my performance requirements. They are VERY HEAVY on memory consumption and not to friendly with CPU usage either. Not to mention still quite buggy. I'll elaborate if you are interested. So, do any of you know of a stable performant WPF web browser control? Thanks.

    Read the article

  • WPF - LayoutUpdated event firing repeatedly

    - by Drew Noakes
    I've been adding a bit of animation to my WPF application. Thanks to Dan Crevier's unique solution to animating the children of a panel combined with the awesome WPF Penner animations it turned out to be fairly straightforward to make one of my controls look great and have its children move about with some nice animation. Unfortunately this all comes with a performance overhead. I'm happy to have the performance hit when items are added/removed or the control is resized, but it seems that this perf hit occurs consistently throughout the application's lifetime, even when items are completely static. The PanelLayoutAnimator class uses an attached property to hook the UIElement.LayoutUpdated.aspx) event. When this event fires, render transforms are animated to cause the children to glide to their new positions. Unfortunately it seems that the LayoutUpdated event fires every second or so, even when nothing is happening in the application (at least I don't think my code's doing anything -- the app doesn't have focus and the mouse is steady.) As the reason for the event is not immediately apparent to the event handler, all children of the control have to be reevaluated. This event is being called about once a second when idle. The frequency increases when actually using the app. So my question is, how can I improve the performance here? Any answer that assists would be appreciated, but I'm currently stuck on these sub-questions: What causes the LayoutUpdated event to fire so frequently? Is this supposed to happen, and if not, how can I find out why it's firing and curtail it? Is there a more convenient way within the handler to know whether something has happened that might have moved children? If so, I could bail out early and avoid the overhead of looping each child. For now I will work around this issue by disabling animation when there are more than N children in the panel.

    Read the article

  • Problem with Android Layout

    - by Ryan
    I'm having a very hard time getting the 2 buttons in the 2nd child linearlayout to display as I want them to... I want them centered on screen but they appear left-aligned. Can anyone help me with this? <?xml version="1.0" encoding="utf-8"?> <LinearLayout xmlns:android="http://schemas.android.com/apk/res/android" android:layout_width="fill_parent" android:layout_height="fill_parent" android:background="@color/black" android:orientation="vertical"> <LinearLayout android:id="@+id/splash" android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="vertical"> <ImageView android:id="@+id/imageLogo1" android:layout_width="fill_parent" android:layout_height="wrap_content" android:adjustViewBounds="true" android:cropToPadding="true" android:scaleType="fitXY" android:src="@drawable/isi_logo" android:paddingLeft="50sp" android:paddingRight="50sp" android:paddingTop="20sp"/> <ImageView android:id="@+id/imageLogo2" android:layout_width="fill_parent" android:layout_height="wrap_content" android:adjustViewBounds="true" android:cropToPadding="true" android:scaleType="fitXY" android:src="@drawable/sa_logo" android:paddingLeft="100sp" android:paddingRight="100sp" android:paddingBottom="20sp"/> </LinearLayout> <LinearLayout android:layout_width="fill_parent" android:layout_height="wrap_content" android:orientation="horizontal" android:layout_gravity="center"> <Button android:id="@+id/buttonScores" android:layout_width="wrap_content" android:layout_height="wrap_content" android:width="100sp" android:text="@string/scores"/> <Button android:id="@+id/buttonStart" android:layout_width="wrap_content" android:layout_height="wrap_content" android:width="100sp" android:text="@string/test"/> </LinearLayout> </LinearLayout>

    Read the article

  • Application error: fault address 0x00012afb (Expert)

    - by Christian Almeida
    Hi, I need some "light" to get a solution. Probably there are tons of things that cause this problem, but maybe somebody could help me. Scenario: a Windows server running 24/7 a PostgreSQL database and others server applications (for processing tasks on database, etc...). There are differents servers scenarios (~30), with different hardware and windows versions (XP SP3/ WinServer, etc... all NT based). All aplications were written in Delphi7, and link to DLLs (in D7 also). After some days (sometimes a week, sometimes a couple of months), Windows begins to act strange, like not opening start menu, some buttons are missing in dialogs. And soon some applications do not open, raising a event on eventviewer: Faulting application x, version y, faulting module kernel32.dll, version 5.1.2600.5781, fault address 0x00012afb In mean while, others applications open fine, like notepad, iexplore, etc... but SOME of my applications don't, with only event log described above. But if we do not restart system, in a few days even cmd.exe stops open, (and all other applications) with same error on eventlog. I've tried to find 'what' can cause this, but with no sucess. So, and any advice will be welcome. Thanks in advance.

    Read the article

  • Android: Autoscrolling HorizontalScrollView

    - by DroidIn.net
    I'm using the following code to simulate tabs and since there are more tabs that width can accommodate user can scroll left or right to make a tab button visible. It all works, however I also provide user with ability to fling between tabs by swiping finger left or right on the tab contents. Again - it works. But when I fling to the rightmost tab its corresponding button is barely visible. I want to autoscroll table inside the HorizontalScrollView so the selected tab button will be visible but when I execute HorizontalScrollView.smoothScrollTo(300, 0) nothing happens. It doen't matter how high I set first x parameter nothing will ever move (yes I do have an algorithm to calculate exact position). Here's XML code for scrolling tab buttons <HorizontalScrollView android:layout_width="fill_parent" android:background="@color/tabs_header" android:layout_height="55dip" android:scrollbars="none" android:id="@+id/tabsButtonView"> <TableLayout android:id="@+id/TableLayout01" android:layout_width="fill_parent" android:layout_height="fill_parent"> <TableRow android:id="@+id/TableRow01" android:layout_width="fill_parent" android:layout_weight="1" android:layout_height="0dip" android:paddingTop="5dip" android:paddingLeft="3dip"> <ImageButton android:src="@drawable/linkup_logo_small" android:id="@+id/tabBtt0" android:layout_width="wrap_content" android:layout_marginLeft="2dip" android:layout_marginRight="2dip" android:layout_height="fill_parent" android:padding="5dip" android:background="@drawable/tab_selected"></ImageButton> <ImageButton android:src="@drawable/simplyhired_small" android:id="@+id/tabBtt1" android:layout_height="fill_parent" android:layout_width="fill_parent" android:layout_marginLeft="2dip" android:layout_marginRight="2dip" android:padding="5dip" android:background="@drawable/tab_normal"></ImageButton> <ImageButton android:src="@drawable/indeedcom_small" android:id="@+id/tabBtt2" android:layout_width="fill_parent" android:layout_height="fill_parent" android:padding="5dip" android:layout_marginLeft="2dip" android:layout_marginRight="2dip" android:background="@drawable/tab_normal"></ImageButton> <ImageButton android:src="@drawable/careerbuilder_logo_small" android:id="@+id/tabBtt3" android:layout_width="fill_parent" android:layout_height="fill_parent" android:padding="5dip" android:layout_marginLeft="2dip" android:layout_marginRight="2dip" android:background="@drawable/tab_normal"></ImageButton> </TableRow> </TableLayout> </HorizontalScrollView>

    Read the article

  • JavaFX Datagrid

    - by Chepech
    Hi All. Im in the verge of starting a new RIA development. We've been using Flex/Flash for the last 2 years but we were considering using a more OS approach so we though giving JavaFX a try since it seams the only solid option available. However after a couple of days of research we found out that there is not such thing as a datagrid for it, at least not in the core API. For those unfamiliar with Flex, a Datagrid is a component that allows you to display a collection of data in column-row layout (much like a HTML Table on steroids). The beauty of it is that you only need to worry about the data itself as the component does pretty much the rest (sorting, column dragging, etc). Im afraid to ask... but is there something slightly similar for JavaFX? We require nothing as fancy as Flex Datagrids/AdvancedDatagrids, we only require a easy, straight forward way to display grids of data that are able to have a little of interaction like clicking, sorting and that are able to display images, buttons, etc. without having to download a ton of different jars. If there isn´t something out there... This would be a shot in the back of the head to the idea of giving javaFx the chance to compete with flash on our project (which is sad). I really cant believe the SUN people didnt include something like this on the core API...

    Read the article

  • Help getting frame rate (fps) up in Python + Pygame

    - by Jordan Magnuson
    I am working on a little card-swapping world-travel game that I sort of envision as a cross between Bejeweled and the 10 Days geography board games. So far the coding has been going okay, but the frame rate is pretty bad... currently I'm getting low 20's on my Core 2 Duo. This is a problem since I'm creating the game for Intel's March developer competition, which is squarely aimed at netbooks packing underpowered Atom processors. Here's a screen from the game: ![www.necessarygames.com/my_games/betraveled/betraveled-fps.png][1] I am very new to Python and Pygame (this is the first thing I've used them for), and am sadly lacking in formal CS training... which is to say that I think there are probably A LOT of bad practices going on in my code, and A LOT that could be optimized. If some of you older Python hands wouldn't mind taking a look at my code and seeing if you can't find any obvious areas for optimization, I would be extremely grateful. You can download the full source code here: http://www.necessarygames.com/my_games/betraveled/betraveled_src0328.zip Compiled exe here: www.necessarygames.com/my_games/betraveled/betraveled_src0328.zip One thing I am concerned about is my event manager, which I feel may have some performance wholes in it, and another thing is my rendering... I'm pretty much just blitting everything to the screen all the time (see the render routines in my game_components.py below); I recently found out that you should only update the areas of the screen that have changed, but I'm still foggy on how that accomplished exactly... could this be a huge performance issue? Any thoughts are much appreciated! As usual, I'm happy to "tip" you for your time and energy via PayPal. Jordan Here are some bits of the source: Main.py #Remote imports import pygame from pygame.locals import * #Local imports import config import rooms from event_manager import * from events import * class RoomController(object): """Controls which room is currently active (eg Title Screen)""" def __init__(self, screen, ev_manager): self.room = None self.screen = screen self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.room = self.set_room(config.room) def set_room(self, room_const): #Unregister old room from ev_manager if self.room: self.room.ev_manager.unregister_listener(self.room) self.room = None #Set new room based on const if room_const == config.TITLE_SCREEN: return rooms.TitleScreen(self.screen, self.ev_manager) elif room_const == config.GAME_MODE_ROOM: return rooms.GameModeRoom(self.screen, self.ev_manager) elif room_const == config.GAME_ROOM: return rooms.GameRoom(self.screen, self.ev_manager) elif room_const == config.HIGH_SCORES_ROOM: return rooms.HighScoresRoom(self.screen, self.ev_manager) def notify(self, event): if isinstance(event, ChangeRoomRequest): if event.game_mode: config.game_mode = event.game_mode self.room = self.set_room(event.new_room) def render(self, surface): self.room.render(surface) #Run game def main(): pygame.init() screen = pygame.display.set_mode(config.screen_size) ev_manager = EventManager() spinner = CPUSpinnerController(ev_manager) room_controller = RoomController(screen, ev_manager) pygame_event_controller = PyGameEventController(ev_manager) spinner.run() # this runs the main function if this script is called to run. # If it is imported as a module, we don't run the main function. if __name__ == "__main__": main() event_manager.py #Remote imports import pygame from pygame.locals import * #Local imports import config from events import * def debug( msg ): print "Debug Message: " + str(msg) class EventManager: #This object is responsible for coordinating most communication #between the Model, View, and Controller. def __init__(self): from weakref import WeakKeyDictionary self.listeners = WeakKeyDictionary() self.eventQueue= [] self.gui_app = None #---------------------------------------------------------------------- def register_listener(self, listener): self.listeners[listener] = 1 #---------------------------------------------------------------------- def unregister_listener(self, listener): if listener in self.listeners: del self.listeners[listener] #---------------------------------------------------------------------- def post(self, event): if isinstance(event, MouseButtonLeftEvent): debug(event.name) #NOTE: copying the list like this before iterating over it, EVERY tick, is highly inefficient, #but currently has to be done because of how new listeners are added to the queue while it is running #(eg when popping cards from a deck). Should be changed. See: http://dr0id.homepage.bluewin.ch/pygame_tutorial08.html #and search for "Watch the iteration" for listener in list(self.listeners): #NOTE: If the weakref has died, it will be #automatically removed, so we don't have #to worry about it. listener.notify(event) #------------------------------------------------------------------------------ class PyGameEventController: """...""" def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.input_freeze = False #---------------------------------------------------------------------- def notify(self, incoming_event): if isinstance(incoming_event, UserInputFreeze): self.input_freeze = True elif isinstance(incoming_event, UserInputUnFreeze): self.input_freeze = False elif isinstance(incoming_event, TickEvent): #Share some time with other processes, so we don't hog the cpu pygame.time.wait(5) #Handle Pygame Events for event in pygame.event.get(): #If this event manager has an associated PGU GUI app, notify it of the event if self.ev_manager.gui_app: self.ev_manager.gui_app.event(event) #Standard event handling for everything else ev = None if event.type == QUIT: ev = QuitEvent() elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 1: #Button 1 pos = pygame.mouse.get_pos() ev = MouseButtonLeftEvent(pos) elif event.type == pygame.MOUSEMOTION: pos = pygame.mouse.get_pos() ev = MouseMoveEvent(pos) #Post event to event manager if ev: self.ev_manager.post(ev) #------------------------------------------------------------------------------ class CPUSpinnerController: def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.clock = pygame.time.Clock() self.cumu_time = 0 self.keep_going = True #---------------------------------------------------------------------- def run(self): if not self.keep_going: raise Exception('dead spinner') while self.keep_going: time_passed = self.clock.tick() fps = self.clock.get_fps() self.cumu_time += time_passed self.ev_manager.post(TickEvent(time_passed, fps)) if self.cumu_time >= 1000: self.cumu_time = 0 self.ev_manager.post(SecondEvent()) pygame.quit() #---------------------------------------------------------------------- def notify(self, event): if isinstance(event, QuitEvent): #this will stop the while loop from running self.keep_going = False rooms.py #Remote imports import pygame #Local imports import config import continents from game_components import * from my_gui import * from pgu import high class Room(object): def __init__(self, screen, ev_manager): self.screen = screen self.ev_manager = ev_manager self.ev_manager.register_listener(self) def notify(self, event): if isinstance(event, TickEvent): pygame.display.set_caption('FPS: ' + str(int(event.fps))) self.render(self.screen) pygame.display.update() def get_highs_table(self): fname = 'high_scores.txt' highs_table = None config.all_highs = high.Highs(fname) if config.game_mode == config.TIME_CHALLENGE: if config.difficulty == config.EASY: highs_table = config.all_highs['time_challenge_easy'] if config.difficulty == config.MED_DIF: highs_table = config.all_highs['time_challenge_med'] if config.difficulty == config.HARD: highs_table = config.all_highs['time_challenge_hard'] if config.difficulty == config.SUPER: highs_table = config.all_highs['time_challenge_super'] elif config.game_mode == config.PLAN_AHEAD: pass return highs_table class TitleScreen(Room): def __init__(self, screen, ev_manager): Room.__init__(self, screen, ev_manager) self.background = pygame.image.load('assets/images/interface/background.jpg').convert() #Initialize #--------------------------------------- self.gui_form = gui.Form() self.gui_app = gui.App(config.gui_theme) self.ev_manager.gui_app = self.gui_app c = gui.Container(align=0,valign=0) #Quit Button #--------------------------------------- b = StartGameButton(ev_manager=self.ev_manager) c.add(b, 0, 0) self.gui_app.init(c) def render(self, surface): surface.blit(self.background, (0, 0)) #GUI self.gui_app.paint(surface) class GameModeRoom(Room): def __init__(self, screen, ev_manager): Room.__init__(self, screen, ev_manager) self.background = pygame.image.load('assets/images/interface/background.jpg').convert() self.create_gui() #Create pgu gui elements def create_gui(self): #Setup #--------------------------------------- self.gui_form = gui.Form() self.gui_app = gui.App(config.gui_theme) self.ev_manager.gui_app = self.gui_app c = gui.Container(align=0,valign=-1) #Mode Relaxed Button #--------------------------------------- b = GameModeRelaxedButton(ev_manager=self.ev_manager) self.b = b print b.rect c.add(b, 0, 200) #Mode Time Challenge Button #--------------------------------------- b = TimeChallengeButton(ev_manager=self.ev_manager) self.b = b print b.rect c.add(b, 0, 250) #Mode Think Ahead Button #--------------------------------------- # b = PlanAheadButton(ev_manager=self.ev_manager) # self.b = b # print b.rect # c.add(b, 0, 300) #Initialize #--------------------------------------- self.gui_app.init(c) def render(self, surface): surface.blit(self.background, (0, 0)) #GUI self.gui_app.paint(surface) class GameRoom(Room): def __init__(self, screen, ev_manager): Room.__init__(self, screen, ev_manager) #Game mode #--------------------------------------- self.new_board_timer = None self.game_mode = config.game_mode config.current_highs = self.get_highs_table() self.highs_dialog = None self.game_over = False #Images #--------------------------------------- self.background = pygame.image.load('assets/images/interface/game screen2-1.jpg').convert() self.logo = pygame.image.load('assets/images/interface/logo_small.png').convert_alpha() self.game_over_text = pygame.image.load('assets/images/interface/text_game_over.png').convert_alpha() self.trip_complete_text = pygame.image.load('assets/images/interface/text_trip_complete.png').convert_alpha() self.zoom_game_over = None self.zoom_trip_complete = None self.fade_out = None #Text #--------------------------------------- self.font = pygame.font.Font(config.font_sans, config.interface_font_size) #Create game components #--------------------------------------- self.continent = self.set_continent(config.continent) self.board = Board(config.board_size, self.ev_manager) self.deck = Deck(self.ev_manager, self.continent) self.map = Map(self.continent) self.longest_trip = 0 #Set pos of game components #--------------------------------------- board_pos = (SCREEN_MARGIN[0], 109) self.board.set_pos(board_pos) map_pos = (config.screen_size[0] - self.map.size[0] - SCREEN_MARGIN[0], 57); self.map.set_pos(map_pos) #Trackers #--------------------------------------- self.game_clock = Chrono(self.ev_manager) self.swap_counter = 0 self.level = 0 #Create gui #--------------------------------------- self.create_gui() #Create initial board #--------------------------------------- self.new_board = self.deck.deal_new_board(self.board) self.ev_manager.post(NewBoardComplete(self.new_board)) def set_continent(self, continent_const): #Set continent based on const if continent_const == config.EUROPE: return continents.Europe() if continent_const == config.AFRICA: return continents.Africa() else: raise Exception('Continent constant not recognized') #Create pgu gui elements def create_gui(self): #Setup #--------------------------------------- self.gui_form = gui.Form() self.gui_app = gui.App(config.gui_theme) self.ev_manager.gui_app = self.gui_app c = gui.Container(align=-1,valign=-1) #Timer Progress bar #--------------------------------------- self.timer_bar = None self.time_increase = None self.minutes_left = None self.seconds_left = None self.timer_text = None if self.game_mode == config.TIME_CHALLENGE: self.time_increase = config.time_challenge_start_time self.timer_bar = gui.ProgressBar(config.time_challenge_start_time,0,config.max_time_bank,width=306) c.add(self.timer_bar, 172, 57) #Connections Progress bar #--------------------------------------- self.connections_bar = None self.connections_bar = gui.ProgressBar(0,0,config.longest_trip_needed,width=306) c.add(self.connections_bar, 172, 83) #Quit Button #--------------------------------------- b = QuitButton(ev_manager=self.ev_manager) c.add(b, 950, 20) #Generate Board Button #--------------------------------------- b = GenerateBoardButton(ev_manager=self.ev_manager, room=self) c.add(b, 500, 20) #Board Size? #--------------------------------------- bs = SetBoardSizeContainer(config.BOARD_LARGE, ev_manager=self.ev_manager, board=self.board) c.add(bs, 640, 20) #Fill Board? #--------------------------------------- t = FillBoardCheckbox(config.fill_board, ev_manager=self.ev_manager) c.add(t, 740, 20) #Darkness? #--------------------------------------- t = UseDarknessCheckbox(config.use_darkness, ev_manager=self.ev_manager) c.add(t, 840, 20) #Initialize #--------------------------------------- self.gui_app.init(c) def advance_level(self): self.level += 1 print 'Advancing to next level' print 'New level: ' + str(self.level) if self.timer_bar: print 'Time increase: ' + str(self.time_increase) self.timer_bar.value += self.time_increase self.time_increase = max(config.min_advance_time, int(self.time_increase * 0.9)) self.board = self.new_board self.new_board = None self.zoom_trip_complete = None self.game_clock.unpause() def notify(self, event): #Tick event if isinstance(event, TickEvent): pygame.display.set_caption('FPS: ' + str(int(event.fps))) self.render(self.screen) pygame.display.update() #Wait to deal new board when advancing levels if self.zoom_trip_complete and self.zoom_trip_complete.finished: self.zoom_trip_complete = None self.ev_manager.post(UnfreezeCards()) self.new_board = self.deck.deal_new_board(self.board) self.ev_manager.post(NewBoardComplete(self.new_board)) #New high score? if self.zoom_game_over and self.zoom_game_over.finished and not self.highs_dialog: if config.current_highs.check(self.level) != None: self.zoom_game_over.visible = False data = 'time:' + str(self.game_clock.time) + ',swaps:' + str(self.swap_counter) self.highs_dialog = HighScoreDialog(score=self.level, data=data, ev_manager=self.ev_manager) self.highs_dialog.open() elif not self.fade_out: self.fade_out = FadeOut(self.ev_manager, config.TITLE_SCREEN) #Second event elif isinstance(event, SecondEvent): if self.timer_bar: if not self.game_clock.paused: self.timer_bar.value -= 1 if self.timer_bar.value <= 0 and not self.game_over: self.ev_manager.post(GameOver()) self.minutes_left = self.timer_bar.value / 60 self.seconds_left = self.timer_bar.value % 60 if self.seconds_left < 10: leading_zero = '0' else: leading_zero = '' self.timer_text = ''.join(['Time Left: ', str(self.minutes_left), ':', leading_zero, str(self.seconds_left)]) #Game over elif isinstance(event, GameOver): self.game_over = True self.zoom_game_over = ZoomImage(self.ev_manager, self.game_over_text) #Trip complete event elif isinstance(event, TripComplete): print 'You did it!' self.game_clock.pause() self.zoom_trip_complete = ZoomImage(self.ev_manager, self.trip_complete_text) self.new_board_timer = Timer(self.ev_manager, 2) self.ev_manager.post(FreezeCards()) print 'Room posted newboardcomplete' #Board Refresh Complete elif isinstance(event, BoardRefreshComplete): if event.board == self.board: print 'Longest trip needed: ' + str(config.longest_trip_needed) print 'Your longest trip: ' + str(self.board.longest_trip) if self.board.longest_trip >= config.longest_trip_needed: self.ev_manager.post(TripComplete()) elif event.board == self.new_board: self.advance_level() self.connections_bar.value = self.board.longest_trip self.connection_text = ' '.join(['Connections:', str(self.board.longest_trip), '/', str(config.longest_trip_needed)]) #CardSwapComplete elif isinstance(event, CardSwapComplete): self.swap_counter += 1 elif isinstance(event, ConfigChangeBoardSize): config.board_size = event.new_size elif isinstance(event, ConfigChangeCardSize): config.card_size = event.new_size elif isinstance(event, ConfigChangeFillBoard): config.fill_board = event.new_value elif isinstance(event, ConfigChangeDarkness): config.use_darkness = event.new_value def render(self, surface): #Background surface.blit(self.background, (0, 0)) #Map self.map.render(surface) #Board self.board.render(surface) #Logo surface.blit(self.logo, (10,10)) #Text connection_text = self.font.render(self.connection_text, True, BLACK) surface.blit(connection_text, (25, 84)) if self.timer_text: timer_text = self.font.render(self.timer_text, True, BLACK) surface.blit(timer_text, (25, 64)) #GUI self.gui_app.paint(surface) if self.zoom_trip_complete: self.zoom_trip_complete.render(surface) if self.zoom_game_over: self.zoom_game_over.render(surface) if self.fade_out: self.fade_out.render(surface) class HighScoresRoom(Room): def __init__(self, screen, ev_manager): Room.__init__(self, screen, ev_manager) self.background = pygame.image.load('assets/images/interface/background.jpg').convert() #Initialize #--------------------------------------- self.gui_app = gui.App(config.gui_theme) self.ev_manager.gui_app = self.gui_app c = gui.Container(align=0,valign=0) #High Scores Table #--------------------------------------- hst = HighScoresTable() c.add(hst, 0, 0) self.gui_app.init(c) def render(self, surface): surface.blit(self.background, (0, 0)) #GUI self.gui_app.paint(surface) game_components.py #Remote imports import pygame from pygame.locals import * import random import operator from copy import copy from math import sqrt, floor #Local imports import config from events import * from matrix import Matrix from textrect import render_textrect, TextRectException from hyphen import hyphenator from textwrap2 import TextWrapper ############################## #CONSTANTS ############################## SCREEN_MARGIN = (10, 10) #Colors BLACK = (0, 0, 0) WHITE = (255, 255, 255) RED = (255, 0, 0) YELLOW = (255, 200, 0) #Directions LEFT = -1 RIGHT = 1 UP = 2 DOWN = -2 #Cards CARD_MARGIN = (10, 10) CARD_PADDING = (2, 2) #Card types BLANK = 0 COUNTRY = 1 TRANSPORT = 2 #Transport types PLANE = 0 TRAIN = 1 CAR = 2 SHIP = 3 class Timer(object): def __init__(self, ev_manager, time_left): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.time_left = time_left self.paused = False def __repr__(self): return str(self.time_left) def pause(self): self.paused = True def unpause(self): self.paused = False def notify(self, event): #Pause Event if isinstance(event, Pause): self.pause() #Unpause Event elif isinstance(event, Unpause): self.unpause() #Second Event elif isinstance(event, SecondEvent): if not self.paused: self.time_left -= 1 class Chrono(object): def __init__(self, ev_manager, start_time=0): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.time = start_time self.paused = False def __repr__(self): return str(self.time_left) def pause(self): self.paused = True def unpause(self): self.paused = False def notify(self, event): #Pause Event if isinstance(event, Pause): self.pause() #Unpause Event elif isinstance(event, Unpause): self.unpause() #Second Event elif isinstance(event, SecondEvent): if not self.paused: self.time += 1 class Map(object): def __init__(self, continent): self.map_image = pygame.image.load(continent.map).convert_alpha() self.map_text = pygame.image.load(continent.map_text).convert_alpha() self.pos = (0, 0) self.set_color() self.map_image = pygame.transform.smoothscale(self.map_image, config.map_size) self.size = self.map_image.get_size() def set_pos(self, pos): self.pos = pos def set_color(self): image_pixel_array = pygame.PixelArray(self.map_image) image_pixel_array.replace(config.GRAY1, config.COLOR1) image_pixel_array.replace(config.GRAY2, config.COLOR2) image_pixel_array.replace(config.GRAY3, config.COLOR3) image_pixel_array.replace(config.GRAY4, config.COLOR4) image_pixel_array.replace(config.GRAY5, config.COLOR5)

    Read the article

< Previous Page | 307 308 309 310 311 312 313 314 315 316 317 318  | Next Page >