Search Results

Search found 17860 results on 715 pages for 'virtual pc'.

Page 312/715 | < Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >

• No network connection for vmware esxi guests

  - by JavaDev

  I'm new to VMware and setting up an Esxi server as a trial with the intention of possibly virtualizing some of our servers in the near future. I have setup ESXi on a Dell poweredge server, and installed a Centos 5.6 and Ubuntu 11.04 guest os on the server. However I cannot get networking on my guest OS's. The host is connected to a network with a DHCP server via a switch and is configured with a static IP. I have the default set-up for networking on the host: both guests are connected to the default vmnic1 adapter via the virtual switch vSwitch0. One thing though, the virtual adapter shows 'Observed IP ranges' to be XXX.XXX.XXX.194-XXX.XXX.XXX.195 (I've blanked out the initial prefixes) i.e just 1 address, even though the network the host is connected to has the usual 255.255.255.0 subnet mask. On the guest machines (using DHCP) by default, I can see an eth0 interface but with no connection or assigned IP address. A physical machine connected to the network gets a DHCP lease as expected. How do I get networking working on my guest OSes? Apologies for the long-winded question.

  Read the article

• How to find the IP Address of a vm running on VMware (or other methods of using VM)

  - by sixtyfootersdude

  I am running VMware Workstation on a Linux box. When I power on a centOS (Linux) virtual machine I cannot get mouse or keyboard control of the machine. I suspect that it has something to do with the error message: You do not have VMware Tools installed in this guest. Chose "Install VMware Tools" from the VM menu. If I click on that menu option it inserts a virtual cd with drivers etc. This does not help me since I don't have keyboard or mouse control over the machine. I was thinking that if I could figure out the IP address or hostname I could use any number of protocols to get into the machine (SSH comes to mind). How can I get the IP address or hostname of this machine? Note: I did not create this machine. A coworker created it who is no longer with the company. Would save me a lot of time if I could get into the machine. I have login credentials so that won't be a problem.

  Read the article

• Window 7 image in vmware will allow network connection out but not http

  - by Ormis

  I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I initially asked this on stackoverflow and now my eyes are now opened up to superuser. Thank you for any help you can provide.

  Read the article

• Pulling application updates from closest server?

  - by Mike Morris

  Setup: 6 Major Sites with Server 2003/2008 DCs doing DHCP/AD Integrated DNS, each on their own subnet. All connect back to datacenter through a 3 mbps WAN ERP server running in the datacenter, accessed by clients at all sites Currently, when we update the software, I manually push a copy of the updated client/config files down to each DC. I have a script that we run on each PC to update the clients. It determines what subnet the PC is on, and pulls the software from that DC. It's messy, but it works. The client has an autoupdate feature, but it'll only pull from the application server (which is housed in the datacenter, over the 3 meg link). It takes forever, since the updates are not "patches" but a full version of the client, even for minor upgrades (bad design). After the most recent patch, you can configure the clients to pull from a different server. Unfortunately, it is the same for all clients. Is there some kind of DNS magic I can use to pull from the local server? For instance, if I tell the clients their update server is ERPUPDATE, can I have their local DNS server return a different IP for ERPUPDATE than the other sites? Example: Client 1 is at site A, client 2 is at site b. They each run the software and a version change is detected. As per the config files, the clients look to ERPUPDATE for their updated client. Client 1 queries DNS for the IP of ERPUPDATE at its current location (site A) DNS at site A returns 192.1.1.5 Client 1 pulls update from 192.1.1.5 Client 2 queries DNS for the IP of ERPUPDATE at its current location (site B) DNS at site B returns 192.1.2.5 Client 2 pulls update from 192.1.2.5 Excuse the poor explanation, I worked 61 hours over the weekend and haven't completely rebounded. I'll be happy to clarify if needed!

  Read the article

• ATI Radeon 5670 Won't Show Resolutions over 1400x900

  - by Phil Sandler

  Just got my new Dell computer with Windows 7 and an ATI Radeon 5670. I attached it to my current monitor, which is a Samsung 24" (2443bwt). Windows 7 does not allow me to display in resolutions greater than 1400 x 900. The setup through a VGA cable into the VGA port of the card. The card also has a DVI port, but I need to use the VGA port because a KVM that supports VGA only. My old PC (which is Windows XP, GeForce 8600 video) can display in 1900 x 1200 on the same monitor (which is what I want) and even higher. It does this through a vga cable also connected to the KVM (through the DVI port but using an adapter). I have tried the same setup (DVI = VGA adapter) on the new PC and nothing changed. I have tried: Updating the drivers via Windows "Update Driver" (says they are current) Installing the updated version of the drivers from ATI (made no difference) Installing Powerstrip (all the options I would need for a custom resolution are greyed out) Installing the drivers/software from ATI caused the ATI Catalyst Control Center software to stop functioning, so I can no longer even start it. I have found some references to other people having this problem and instructions on cleaning the software off and reinstalling it (as uninstalling normally doesn't solve it). I will try this tonight. In any case, I didn't see any options in CCC that would allow me to override the settings for max resolution. However I didn't tinker with it too much before I tried updating the drivers, so I may have missed a setting. I contacted Samsung via online chat and they say it's a problem with the video card/driver (of course--what else would they say?). Any thoughts on what else I could try?

  Read the article

• Per-mailbox IMAP settings in Exchange 2003 apply successfully but revert to server default

  - by erictheavg

  The title says most of it. I have a Spiceworks mailbox that connects to our Exchange Server 2003 box via IMAP for receiving help desk issues. But for complicated reasons, I want it to receive those emails in text-only format. So, I discovered that you can just go to: Exchange System Manager Administrative Groups First Administrative Group First Storage Group Mailbox Store Mailboxes Right-click the mailbox, Configure Exchange Features Edit the properties for IMAP Set that mailbox to only receive message bodies as plain text. I click OK, then Next, it reports success, and I assume I'm done. But then when I go right back to where I was, I see that "Use protocol defaults" is still checked. Anyone have a clue why this would be? Some other details: I'm logged in as Administrator when I do this. I can't change this setting for the entire IMAP virtual server because some regular users use it. I only have one IP address to play with, which means I can't create another IMAP virtual server. Any suggestions or ideas are greatly appreciated!

  Read the article

• WIN7 constant BSOD 0x7B on boot, not producing any dump files where to go from here?

  - by prayingpantis

  So my one win 7 pc has been getting a BSOD on boot (roughly a sec after load screen starts) after a power failure. The complete stop code is 0x0000007B (0x80786B58, 0xC0000034,0x00000000,0x00000000) I've searched for quite a while now on the net and it seems like most people gave up after gettting 0x7B and no dump files. What I've tried so far: startup repair - reports it cannot repair computer automatically. BadPatch is reported somewhere in a problem signature contained in the problem details. startup repair with a WIN 7 CD - also fails, I can't recall what the error was, but it was not the same as the error produced with the start up tool shipped with the version of WIN 7 installed on my machine (I think the text had something ACL-ish contained in it) used a boot disk (Hiren's boot iso) - I used it to enable the CrashDump registry key and then after BSOD, read the HDD's dump locations but it was empty. Note, I'm quite sure the registry keys I edited are the correct ones, since the reboot on BSOD option was enabled by default and after I changed the regkey controlling this functionalitty to 0 the BSOD stayed after I booted again. check disk - works and returns no problems, also it seems I'm able to access all my files on the HDD. mem test - works and returns no errors So I'm not sure what else I can do to figure out what is the problem here. I read somewhere that you can use WINDBG to remote debug another PC, but I'm not sure if this is possible since the OS isn't even loaded yet? Also the last driver change I made on the system was installing a video driver, but I had no problems with it and were able to reboot several times until the power outage happened and the BSOD appeared. Any help or guidance for a way to DEBUG this problem would really be appreciated (I'm not really that keen to try a whole bunch of random fixes, I'd rather try and narrow down the problem first).

  Read the article

• Doesn't work Nginx + SSI

  - by boopidoopi

  I have some problems. Nginx doesn't work with SSI. Nginx listens 80 port (frontend), apache2 listens 81 port (backend). That is my nginx configurations: server { listen 80; server_name test.dev www.test.dev; error_log /var/log/nginx/error.log debug; log_subrequest on; location / { ssi on; proxy_pass http://localhost:81; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 15m; client_body_buffer_size 128k; } } SSI include in test.dev index.php: <!--# include virtual="http:test.dev/test.html" -- When I open test.dev/index.php I see clean page. In page source: <!--# include virtual="http:test.dev/test.html" -- So how to enable SSI in nginx? Can you help me?

  Read the article

• Apache, logerror and logrotate: what is the best method?

  - by OlivierDofus

  Here's a vhost example of my sites: <VirtualHost *:80> DocumentRoot /datas/web/woog ServerName woog.com ServerAlias www.woog.com ErrorLog "|/httpd-2.2.8/bin/rotatelogs /logs/woog/error_log 86400" CustomLog "|/httpd-2.2.8/bin/rotatelogs /logs/woog/access_log 86400" combined DirectoryIndex index.php index.htm <Location /> Allow from All </Location> <Directory /*> Options FollowSymLinks AllowOverride Limit AuthConfig </Directory> </VirtualHost> I've got 12 sites running now. This gives something like: [Shake]:/sources/software/mod_log_rotate# ps x | grep rotate /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/error_log 86400 /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/error_log 86400 [snap (as many error_log as virtual hosts)] /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/access_log 86400 /httpd-2.2.8/bin/rotatelogs /logs/[hidden siteweb]/access_log 86400 [snap (as many access_log as virtual hosts)] grep rotate [Shake]:/sources/software/mod_log_rotate# !!! I've been looking everywhere but I've only found mod_log_rotate. The "little" problem is that the author (very good C developper) explains: "Unfortunately Apache error logs are handled in such a way that we can't work the same log rotation magic on them. Like transfer logs they support piped logging though so you can still use rotatelogs for them. " So my question is: what would be the best way to handle multiple logs? If I just do a very classical log and I use the system's "logrotate" program couldn't this be a good deal? How would/do you deal with that? Thank you!

  Read the article

• Website hosted on my virtualbox web server not displaying images or applying css when viewed through phone

  - by WebweaverD

  I would really appreciate it if someone could help me. Please let me know if you need more info in the comments. My Set Up I have a windows 7 pc. On it I run a virtual box VM with a ubuntu 12 guest os and LAMP setup. I share files between the two machines using samba from linux to windows and using windows file sharing (Workgroup) the other way round. The vm is set up with a bridged network adapter and can happily serve web pages to my host machine. I use DHCP reservations on my home wireless router/modem to reserve an ip for the vm and give it a sitename.dev in my windows host file so I can access it at sitename.dev through the browser. The Problem So far so good but I have a dev project which needs a lot of mobile template development, now obviously I can use a browser plugin to simulate a mobile device but I would like to be able to see the real thing easily on my phone during development. So ideally I would like a similar setup on my iphone to my windows setup Now I'm not great on networking and dont have much experience with web server set up. So when I typed the ip of my virtual box into my iphone i wasnt expecting to see anything. I was pleasantly surprised when my site loaded up. The javascript even seems to be running but the images and css are not happening. My Question 1) What is happening here, is it something to do with the bridged set up on the vm network? 2)How do I make the sites load properly through my phone Notes I've also tried another phone. The same sites viewed on live servers work fine.

  Read the article

• Network driver for Hyper-V restore from Windows Home Server

  - by Philipp Schmid

  I have backed up Windows Server 2008 running virtualized on Hyper-V to a Windows Home Server 2008 SP1 (I know I should have backed up the VHD instead). Now I need to restore the contents of the VM from WHS. I have created a restore CD ISO and used it to create a new VM. It all works as advertised up to the point where the restore process wants to load the network drivers (it only finds 4 disk drivers on the restore CD. but no network drivers). So I created a virtual floppy and copied the contents of 'Home Server Drivers for Restore onto it. But no luck! I have tried moving the 4 subdirectories into the root of the floppy, but that didn't work either. Finally, I started another instance of the WS 2008 to identify the network driver that the virtualized instance is using (%WINDOWS%\system32\drivers\netvsc60.sys) and copied that file onto the virtual floppy, without success. Does anyone have any suggestions on how to get networking working on a Hyper-V instance running off the Windows Home Server Restore CD? UPDATE: As suggested by delenda, I have added a legacy network adapter to my VM, and indeed I now get a network driver listed! However, the WHS it still not found, even after entering the home server name manually. PHS

  Read the article

• If I ssh to a domain provided by dyndns, does my password go through them?

  - by D Connors

  I'm running Ubuntu on my work PC, and my work place provides me with a static IP address but not with a domain. It's sometimes useful for me to connect to that PC through ssh, but it's not common enough for me to instantly remember the IP number. So I set um a dyndns account, and associated a short and intuitive domain name to that IP. Here's my question, when I try to ssh to the domain, it asks me $ ssh [email protected] The authenticity of host 'something.there.foo (xx.xx.xx.xx)' can't be established. RSA key fingerprint is 'ALPHANUMERIC STRING' Are you sure you want to continue connecting (yes/no)? That surprised me a little bit. I have already registered the RSA fingerprint by connecting directly to the IP address. I thought the domain name was simply a convenient way of pointing me in the right direction (i. e. the ip address), but that message makes me think my data is actually going through their servers or something. Which one is it? Am I sending my password through someone else's server? Or is ssh just really really careful, thus warning me even if the final destination is a know host? The ssh server I'm using is the openssh-server package.

  Read the article

• HPET missing from available clocksources on CentOS

  - by squareone

  I am having trouble using HPET on my physical machine. It is not available, even though I have enabled it in my bios, forced it in grub, and triple checked my kernel to include HPET in its compilation. Motherboard: Supermicro X9DRW Processor: 2x Intel(R) Xeon(R) CPU E5-2640 SAS Controller: LSI Logic / Symbios Logic SAS2004 PCI-Express Fusion-MPT SAS-2 [Spitfire] (rev 03) Distro: CentOS 6.3 Kernel: 3.4.21-rt32 #2 SMP PREEMPT RT x86_64 GNU/Linux Grub: hpet=force clocksource=hpet .config file: CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_HPET=y dmesg | grep hpet: Command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet Kernel command line: ro root=/dev/mapper/vg_xxxx-lv_root rd_NO_LUKS rd_LVM_LV=vg_xxxx/lv_root KEYBOARDTYPE=pc KEYTABLE=us rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_xxxx/lv_swap rd_NO_DM LANG=en_US.UTF-8 rhgb quiet panic=5 hpet=force clocksource=hpet cat /sys/devices/system/clocksource/clocksource0/current_clocksource: tsc cat /sys/devices/system/clocksource/clocksource0/available_clocksource: tsc jiffies What is even more confusing, is that I have about a dozen other machines that utilize the same kernel .config, and can use HPET fine. I fear it is a hardware issue, but would appreciate any advice or help with getting HPET available. Thanks in advance!

  Read the article

• Windows 7 does not detect my new hard drive?

  - by jasondavis

  I just built a really nice new PC. Some specs... Intel i7-930 CPU ASRock Extreme X58 motherboard with sata 3 and USB 3.0 12gb of G-Skill DDR3 RAM 80gb Intel G2 Solid state drive for Windows 7 and other programs to run on Windows 7 Pro 64bit OS 2 1gb grapghic cards for 4 monitor support Thats the main components. Well today my new 1tb western digital hard drive came which I plan to use for data to preserve the life of my SSD (hopefully). I hooked up it's sata power input and then hooked up it's sata data cable to a sata 2 port on my motherboard, I boot windows 7 and go into my computer and the drive is not showing up with my other drives. I then re-boot again and check again, no luck. I then shut down the PC and open the case back up, I then check my connections and they all look good. I then boot up and I can see the new HD is on and spinning. I then go into my BIOS settings to see if it registers there and it DOES! It shows I have a WD 1tb hard drvie on sata 2 port 6. So I am at a loss of why it is not showing up as an option in windows? Windows acts as if the drive is not there. Please help

  Read the article

• Window too big to fit the screen!

  - by syockit

  I'm using Windows 7 on a 8.9' monitor with 1280x768 screen resolution. Using the might of arithmetics, I'm able to determine that my dpi (actually ppi) should be 167. Win7 is really helpful in that it doesn't have to restart to apply new dpi settings, unlike its predecessors (though I'd rather it applies straight away). The problem with small monitors in Windows is that when you come across windows too big to fit the screen, you can't move the title bar far above it. In X window managers I used in the past, you could alt-drag the window to anywhere you want, but in Windows, even if you alt-space and select move, it will automatically push the window back until the title bar is visible. I'm looking for a solution that either: allows me to move window freely without regard to titlebar visibility, or attach a scrollbar to existing window, or EDIT: create virtual desktops that allow me to span windows over 2 desktops, or EDIT 2: allow me to set larger virtual resolution, then pan & scan. EDIT 3: I found some progs that might do some of the above: 1) AltDrag allows me to drag, resize using alt and left/right mouse button. Neat! Best solution so far. 2) GiMeSpace Desktop Extender is supposed to allow me to scroll desktop. Didn't work. The other new version, GiMeSpace Ultimate Taskbar worked, but it destroys my Superbar, replacing it with its map.

  Read the article

• How do I speed up and cache mmap file access over NFS on Linux?

  - by Zan Lynx

  The server and client are both 64-bit Ubuntu 10.04 LTS. The application in question is a custom app that uses mmap() for fast random file access. Its ideal state is when the entire file is cached in RAM. The network connections are really fast 10Gb Ethernet. It is a virtual server blade setup. It isn't the network connections slowing things down because everything performs superbly when using a virtual disk (iSCSI to the SAN). But when we run the application on a NFS home directory mount, performance goes to the dogs. It appears that the Linux kernel isn't caching anything. So it is reading every single disk block needed by mmap() accesses over and over and over again. The NFS mount is done through autofs, which has only default settings. /proc/mounts shows the NFS mount is done with the following options: rw,relatime,vers=3,rsize=131072,wsize=131072,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,mountaddr=192.168.11.52,mountvers=3,mountproto=tcp,addr=192.168.11.52 How can I make Ubuntu 10.04 cache the file instead of reloading it all the time?

  Read the article

• Which RAM is faster (or, is Crucial's Memory Advisor giving non-optimal advice)?

  - by adpe

  In general, if a PC's motherboard is only specified for RAM up to a given core speed x, will that PC be faster with: RAM of latency y capable of running at a maximum core speed >x or RAM of latency <y capable of running at a maximum core speed of exactly x ? I would have thought the latter, but Crucial's Memory Adviser tool advises the former. So, which of us is correct - me, or the machine? (Here is a concrete example: I wish to upgrade a Toshiba Satellite Pro L300-155 laptop from its current 1GB RAM to 2GB Crucial RAM. The laptop's specifications are given here. I see from those specifications that the laptop is designed for DDR2-667 Ram. Crucial sells two compatible 2GB kits, priced exactly the same as each other: DDR2-667, CL=5; DDR2-800, CL=6. It seems to me that of these two upgrade kits, the first kit would run slightly faster on the L300-155 than the second, because both will presumably be capped at DDR2-667 core speed (see laptop specs), but the second kit has more latency. However, Crucial's Memory Advisor tool recommends the second kit.)

  Read the article

• sporadic routing to another website when opening a common url

  - by user226098

  I have a strange problem in our office: Sometimes when opening a url from one of our projects random url in any browser not the right website shows up but some other website. In most of the cases it redirects to google.com with some parameters like https://www.google.de/?gfe_rd=cr&ei=krOOU8_kGcSKswadyYDQBw&gws_rd=ssl or just the ugly google 404 page). But today it remains on the origial url but shows up the the content of http://debug.netdna-cdn.com/. This happens about 1 time a week and for no apparent reason. Even stranger it only occurs on a single pc in the network. It now happens on two different computers in the network. Both use windows 8. The problem cannot be fixed by clearing the browser cache but by rebooting the pc or using ipconfig /flushdns. So I think it has something to do with the dns cache of the machine. But I have no idea what the reason is for this and how i can figure out how to solve it. Any ideas?

  Read the article

• AA doesn't work due to monitor?

  - by MikeQ

  I have a monitor (with TV tuner - Philips 221T1SB), native resolution of 1920x1080, but there is an Overscan in Catalyst. It says from left to right '10%' and '0%', if i set it (all the way to the left) on 10%, i get screen with black borders (you know what i mean), but if i set it to 0%, i get a filled monitor. It does make sense, but why the hell is there such an option? I never had any AA issues before, but now, with this monitor, here they go. I can't find any solution, i have only one lead = overscan, or pretty much anything with the CCC settings. Yes, i almost forgot. After a bit of trying to configure the monitor with remote, i found there is a PC channel option, few other channels, and then a HDMI option. I have monitor through HDMI, but why i get black screen when i select the PC channel? That might be another problem. I tried almost everything. Please guys, give me a hand. I don't want jaggies! CPU: Intel I5-750 @4,0GHz RAM: Corsair Vengeance 8GB 1600MHz GPU: AMD Gigabyte HD 7950 Windforce @1100/1400, 1,174V Motherboard: ASUS P7P55D-E EVO

  Read the article

• Svchost.exe connecting to different IPs with remote port 445

  - by Coll911

  Im using Windows XP Professional SP2. Whenever I start my Windows, svchost.exe starts connecting to all the possible IPs on LAN like from 192.168.1.2 to 192.168.1.200. The local port ranges from 1000-1099 and the remote port being 445. After it's done with the local IPs, it starts connecting to other random IPs. I tried blocking connections to the port 445 using the local security polices but it didn't work. Is there any possible way I could prevent svchost from connecting to these IPs without involving any firewall installed? My PC slows down due to the load. I scanned my PC with MalwareBytes and found out it was infected with a worm, it's deleted now but still svchost is connecting to the IPs. I also found out that in my Windows Firewall settings, under Internet Control Message Protocol (ICMP), there's a tick on "allow incoming echo request" (usually disabled) which is locked and I can't disable it. Its description is as follows Messages sent to this computer will be repeated back to the sender. This is used for trouble shooting for e.g to ping a machine. Requests of this type are automatically allowed if TCP port 445 is enabled. Any solutions? I can't bear going with the reinstalling Windows phase again.

  Read the article

• Server redirect

  - by Tyy

  I have asp.net app XYZ which requires SSL. I am supposed to work with IIS that has only one Web Site - DefaultWebSite - containing multiple apps and virtual directories (3rd party). So, my app is located at domain.com/XYZ. I have to meet these conditions: 1.) requesting DefaultWebSite (domain.com) will run my app. It could redirect to ../XYZ, but I would rather not to. If it has to be done this way, requesting DefaultWebSite or my app over both HTTP and HTTPS will always ends up with redirecting to https://domain.com/XYZ 2.) I can't touch any other apps or virtual directories, can't create additional Web Site, can't set DefaultWebSite to require SSL, ... EDIT: 3.) transmitted data (GET or POST) must be preserved I tried to: set Web Site root directory to my app, but it this caused other apps to crash because of my Web.config (not sure why). set up HTTP redirect on DefaultWebSite to https://domain.com/XYZ. This seems to work correctly, but this doesn't work if user requests my app directly (redirected to domain.com/XYZ/XYZ, or redirect loop). set up Default Document, but this seems to work only if it is located in the Web Site root directory. I know I could write simple .aspx with Response.Redirect, but... is there any better solution? Am I missing something?

  Read the article

• CentOS server. What does it mean when the total used RAM does not equal the sum of RES?

  - by Michael Green

  I'm having a problem with a virtual hosted server running CentOS. In the past month a process (java based) that had been running fine started having problems getting memory when the JVM was started. One strange thing I've noticed is that when I start the process, the PID says it is using 470mb of RAM while the 'used' memory immediately drops by over a 1GB. If I run 'top', the total RES used across all processes falls short of the 'used' listed at the top by almost 700mb. The support person says this means I have a memory leak with my process. I don't know what to believe because I would expect a memory leak to simply waste the memory the process is allocated not to consume additional memory that doesn't show up using 'top'. I'm a developer and not a server guy so I'm appealing to the experts. To me, if the total RES memory doesn't add up to the total 'used' it indicates that something is wrong with my virtual server set-up. Would you also suspect a memory leaking java process in this case? If I use free before: total used free shared buffers cached Mem: 2097152 149264 1947888 0 0 0 -/+ buffers/cache: 149264 1947888 Swap: 0 0 0 free after: total used free shared buffers cached Mem: 2097152 1094116 1003036 0 0 0 -/+ buffers/cache: 1094116 1003036 Swap: 0 0 0 So it looks as though the process is using (or causing to be used) nearly 1GB of RAM. Since the process (based on top is only using 452mb, does that mean that the kernal is all of a sudden using an additional 500mb?

  Read the article

• disable specific PCI device at boot

  - by Rhymoid

  I've just reinstalled Debian on my Sony VAIO laptop, and my dmesg and virtual consoles all get spammed with the same messages over and over again. [ 59.662381] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 59.901732] usb 1-1.2: new high-speed USB device number 91 using ehci_hcd [ 59.917940] hub 1-1:1.0: unable to enumerate USB device on port 2 [ 60.157256] usb 1-1.2: new high-speed USB device number 92 using ehci_hcd I believe these messages are coming from an internally connected USB device, most likely the webcam (since that's the only thing that doesn't work). The only way I can seem to have it shut up (without killing my actually useful USB ports) is to disable one of the USB host controllers: # echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci_hcd/unbind This also takes down my Bluetooth interface, but I'm fine with that. I would like this setting to persist, so that I can painlessly use my virtual console again in case I need it. I want my operating system (Debian amd64) to never wake it up, but I don't know how to do this. I've tried to blacklist the module alias for the PCI device, but it seems to be ignored: $ cat /sys/bus/pci/devices/0000\:00\:1a.0/modalias pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 $ cat /etc/modprobe.d/blacklist blacklist pci:v00008086d00003B3Csv0000104Dsd00009071bc0Csc03i20 How do I ensure that this specific PCI device is never automatically activated, without disabling its driver altogether? -edit- The module was renamed recently, now the following works from userland: echo "0000:00:1a.0" > /sys/bus/pci/drivers/ehci-pci/unbind Still, I'm looking for a way to stop the kernel from binding that device in the first place.

  Read the article

• nginx + IIS + GET

  - by Eralde

  I have nginx on pc "A" & IIS with ASP.NET on pc "B". nginx is configured like this: ... location ~ ((Web|Script)Resource.*)$ { proxy_pass "B"/$1; proxy_redirect off; proxy_set_header REMOTE_ADDR $remote_addr; proxy_set_header REQUEST_URI $request_uri; proxy_set_header HTTP_REFERER $http_referer; #proxy_set_header REQUEST_URI $request_uri; proxy_set_header QUERY_STRING $query_string; proxy_set_header X-Real-IP $remote_addr; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; }... but requests to "B"/WebScript?a=b&c=d aren't able to deliver GET data (a=b&c=d) to IIS part. Could anyone help with this? Edit: There's some additional info: nginx is also configured to proxy other data to Apache, running on "A" everything is fine there (at least GET is OK). configuration is the same as above, but for different location

  Read the article

• Setting up DNS using BIND

  - by dupdupdup

  i have troubles setting up my db files. Please kindly point me in the right direction! i need to define a nameserver that manage a domain example.org.au then i need it to have two records. one called server which is the ip address of current machine the other called www where www.example.org.au will be pointed to another ip address. i cant seem to get my system to work. This is my db.example.org.au file example.org.au. IN SOA server.example.org.au. ( 1; 3; 1h; 1w; 1h ) ; ; ;Host addresses localhost.example.org.au IN A 127.0.0.1 www.example.org.au. IN A 192.168.1.200 ; another virtual machine server.example.org.au IN A 192.168.1.199 ; current virtual machine If possible Please correct my errors! thanks! Any good guides out there? Thanks in advance ! :)

  Read the article

< Previous Page | 308 309 310 311 312 313 314 315 316 317 318 319  | Next Page >