wireless range - Page 313

Slow wired internet connection on Realtek RTL8168-8111 (Rev 6)

- by Mark

I keep on seeing issues people are having with their wireless. I am having an issue with being wired into my router. I installed Ubuntu 11.10 the other day, on my custom PC. The motherboard I have installed on this PC is an ASUS P8H61-M. The issue I am having is with my speed. I have a dual boot, windows 7 and the new Ubuntu. On my Windows install I am getting test speeds from Speakeasy at 17Mbps and actual downloads around 2-3MB/s. With Ubuntu, I am getting test speeds from Speakeasy at 1.14Mbps and actual downloads around 60KB/s. I have disabled IPv6 and am no using GoogleDNS for my DNS, but it hasn't resolved the issue. I have scanned my router (WRT54GS Linksys) to disable IPv6 connections, and I am not seeing any option for that. I cannot figure out why I am getting such sluggish internet connection. Any help to resolve would be great! I performed an iconfig -a with these results: mark@Mark-ASUS:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr f4:6d:04:d1:2c:4e inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fed1:2c4e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21888 errors:0 dropped:21888 overruns:0 frame:21888 TX packets:21068 errors:0 dropped:90 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26348337 (26.3 MB) TX bytes:2217140 (2.2 MB) Interrupt:46 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:952 (952.0 B) TX bytes:952 (952.0 B) My specs are: mark@Mark-ASUS:~$ sudo lspci -nn 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1080] (rev 01) udev information: KERNEL[11.351405] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 UDEV [11.363905] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 ID_VENDOR_FROM_DATABASE=Realtek Semiconductor Co., Ltd. ID_MODEL_FROM_DATABASE=RTL8111/8168B PCI Express Gigabit Ethernet controller ID_BUS=pci ID_VENDOR_ID=0x10ec ID_MODEL_ID=0x8168 ID_MM_CANDIDATE=1 dmesg information: [ 2.855982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.856366] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000064c000, f4:6d:04:d1:2c:4e, XID 0c900800 IRQ 46 [ 12.540956] r8169 0000:04:00.0: eth0: link down [ 12.540961] r8169 0000:04:00.0: eth0: link down [ 12.541173] ADDRCONF(NETDEV_UP): eth0: link is not ready I took out a lot of information that did not pertain to eth0, because the previous edits wouldn't save. If I need any more information, let me know. I would love to get this resolved. The other issue I am noticing is sometimes my connection disconnects all together, for about a minute, then it reconnects.

Read the article

As a person getting into mobile development, what's the best mobile platform in terms of profitability? [closed]

- by Kyle Loman

I realize this question can range very far so would love to hear any and all opinions on this. However, I'll be honest and say that I have been thinking of this in terms of most profitable. I know how this may sound either way but this is one of my main sticking points. I realize that I'm not guaranteed a single cent and success is never guaranteed but I'm going into this with the thought of making something out of it both financially and also for my own interest. I know that iOS gets a lot of attention on this front but Android commands a lot more market share. However, I know there are drawbacks to Android too, whether it's in the actual development process and programming (though I've heard conflicting reports on this, such as how easy/difficult it is for to address screen res in different devices) or the app ecosystem being flooded. But iOS's app ecosystem has been described as too saturated and harder to compete in for that reason. Since Windows Phone has fewer apps than both of those two, that might be the best place to start in order to be closer to the ground floor of the store and be noticed more? Less saturation = better chances of sales or differentiating? Something like the gold rush during the first years of the iOS App Store (not exactly but at least in concept)? Would it be that despite fewer users on the platform, there's more exposure due to less competition so that may translate to better success at sales? Plus, I know MS is in it for the long haul so I'm not too fearful of something like WebOS going away. Obviously RIM isn't very popular nowadays but I read a recent article that says Blackberry actually has the apps that make the most money, any thoughts on that: http://gigaom.com/mobile/which-mobile-oss-apps-make-most-money-surprise-its-blackberry/ Again, this is all I've heard or known about so if there's anything to add or correct here, please do. In addition, this has actually affected my next personal phone upgrade. I'm eligible for a carrier discount now and I've had my eye on the iPhone 5. However, the Lumia 920 is the one I'm holding out for and I'm open to trying an Android but I'm not sure I can wait that long for any new Nexus or even the Razr HD. Even the new Lumia in November is making me antsy, I'm so close to just getting an iPhone 5. But when I say this has affected my phone choice, I'd want to be able to carry the apps I write with me so that I'm able to pull my phone out to show people without having to carry around a second device to do so. So that's why I'd like to make my personal phone match the main platform I'm developing for. Of course, I will likely expand to other platforms if I gain any decent success but the one I target now would serve well as my personal phone I carry around so that I can use it as a marketing tool, in a sense, showing people my apps if the opportunity presents itself. So what's the best mobile platform to choose, and especially in regards to most lucrative? As said previously, this would influence my personal phone choice greatly. Thanks in advance and I hope this isn't taken the wrong way - I understand there are trade-offs and other factors that may balance this out but making some revenue is key among that. For some background, I have done software development and know programming language concepts so I'm not entirely new to it and I do get the notion of being familiar with these things so that I can translate this skill among a variety of languages but I'm currently just having difficulty choosing my first main mobile platform based on the criteria I've outlined above.

Read the article

How to undo a changeset using tf.exe rollback

- by Tarun Arora

Technorati Tags: Team Foundation Server 2010,Team Foundation Utilities,TFS2010 Oh no! Did you just check in a changeset in to TFS and realized that you need to roll back the changeset because the changes were suppose to go in a different branch? Or did you just accidently merge a wrong changeset in your release branch? There are several ways to undo the damage, Manual: Yes, we all just hate this word but for the record you could manually rollback the changes. Get Specific version on the branch and chose the changeset prior to the one you checked in. After that check out all the files in the changeset and check them in. During the check in you will receive a conflict. At this point choose ‘Keep local changes’ in the conflict resolution window and check in the files. Automated: Yes, we just love it! TFS comes with a very powerful command line utility ‘tf.exe’ that gives you the ability to rollback the effects of one or more changesets to one or more version-controlled items. This command does not remove the changesets from an item's version history. Instead, this command creates in your workspace a set of pending changes that negate the effects of the changesets that you specify. Syntax tf rollback /toversion:VersionSpec ItemSpec [/recursive] [/lock:none|checkin|checkout] [/version:versionspec] [/keepmergehistory] [/login:username,[password]] [/noprompt] tf rollback /changeset:ChangesetFrom~ChangesetTo [ItemSpec] [/recursive] [/lock:none|checkin|checkout] [/version:VersionSpec] [/keepmergehistory] [/noprompt] [/login:username,[password]] I’ll explain this with an example. Your workspace is at the location C:\myWorkspace You want to rollback changeset # 145621 C:\Workspace\MyBranch>tf.exe rollback /changeset:145621 /recursive How do i rollback/undo a series of changesets? You can also rollback a range of changesets by using the following C:\Workspace\MyBranch>tf.exe rollback /changeset:145601~145621 /recursive This will check out the files in the version control and you should be able to see them in the pending changes. Go on check them in to undo the specific changeset that you just rolled back. Do you completely want to get rid of the changeset from all future merges between the two branches? /KeepMergeHistory: This option has an effect only if one or more of the changesets that you are rolling back include a branch or merge change. Specify this option if you want future merges between the same source and the same target to exclude the changes that you are rolling back. Errors “If you get the message ‘Unable to determine the workspace.’ You may be able to correct this by running ‘tf worksapces /collection:TeamProjectCollectionUrl’” you are in the wrong directory. Make sure that you run the ‘tf rollback’ command from the directory of your workspace. Status Exit Code Description 0 The operation rolled back all items successfully. 1 The operation rolled back at least one item successfully but could not roll back one or more items. 100 The operation could not roll back any items. To use the command you must have the Read, Check Out, and Check In permissions set to Allow. So, have you been in a rollback undo situation before? Share this post :

Read the article

SQLAuthority News – Advantages of Distance Learning

- by Pinal Dave

Distance education is extremely popular – almost overnight, it seems. Almost everyone has taken an online course, or knows someone who has, or is considering joining an online school. There are many advantages and disadvantages to attending an online school – but the same can be said of attending a physical school! Let’s take a look at the top reasons to use distance education. 1) Flexibility. Physical universities are usually willing to make some concessions to student – like night classes, study hours, and online networks. However, nothing is going to beat the flexibility of distance education. You can attend classes and take notes anytime, anywhere, wearing anything you’d like! 2) Affordability. We don’t need to get into hard numbers to understand how an expensive university can be. Students are taking on more and more debt just to get an education. Many of these fees pay for room, board, and facilities. Distance education cuts out all these costs, and makes attending school much more affordable for the average student. 3) Try before you buy. Did you know that the average college student changes his or her major 10 times before they graduate? You can imagine that this kind of indecision plays a huge part in WHEN you graduate – not being able to make up your mind can cost you big bucks if you have to stay in school for extra years! Distance education allows you to take different classes from a wide range of disciplines. Do you want to study forensic science or English literature? Now you don’t have to pay for classes you can’t afford just to find out. 4) Pace yourself. Some students struggle in a traditional classroom setting – classes can be taught too fast, too slow, or there are too many distractions. Distance education allows mature students to set the pace themselves. They can rewatch lectures they didn’t catch the first time, or go through classes quickly if they are already familiar with the material – cutting out the chance of burning out or getting bored. 5) Lifelong learning. Maybe you already have a degree, but would like to learn more about your field, or a related field, or maybe even about something completely unrelated – just because you are curious! Distance education allows you to learn whatever you want ,whenever you want (and yes, wearing anything you’d like!). 6) Attend whatever college you want. Because of the popularity of distance education, physical campuses are getting in on the game by offering online courses – often just uploaded versions of classes already taught at their campus. Ever wanted to attend Harvard, but knew you couldn’t get in? Take a class online! Of course, you probably should not attempt to lie and say you have a Harvard degree, but Ivy League colleges are prestigious because they are the best in their field – take advantage of the best by taking an online course! I am a big believer in continuing education, whether it is online courses, returning to school, or even take informal classes online. Distance education can be a great way to accomplish these goals and become a lifelong learner. My friends at provides training through virtual classrooms for students who want to avoid travelling. Distance learning course allows IT aspirants to connect with trainers using the internet. I encourage everyone to check it out! Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, T SQL, Technology

Read the article

The Evolution of Oracle Direct EMEA by John McGann

- by user769227

John is expanding his Dublin based team and is currently recruiting a Director with marketing and sales leadership experience: http://bit.ly/O8PyDF Should you wish to apply, please send your CV to [email protected] Hi, my name is John McGann and I am part of the Oracle Direct management team, based in Dublin. Today I’m writing from the Oracle London City office, right in the heart of the financial district and up to very recently at the centre of a fantastic Olympic Games. The Olympics saw individuals and teams from across the globe competing to decide who is Citius, Altius, Fortius - “Faster, Higher, Stronger" There are lots of obvious parallels between the competitive world of the Olympics and the Business environments that many of us operate in, but there are also some interesting differences – especially in my area of responsibility within Oracle. We are of course constantly striving to be the best - the best solution on offer for our clients, bringing simplicity to their management, consumption and application of information technology, and the best provider when compared with our many niche competitors. In Oracle and especially in Oracle Direct, a key aspect of how we achieve this is what sets us apart from the Olympians. We have long ago eliminated geographic boundaries as a limitation to what we can achieve. We assemble the strongest individuals across multiple countries and bring them together in teams focussed on a single goal. One such team is the Oracle Direct Sales Programs team. In case you don’t know, Oracle Direct EMEA (Europe Middle East and Africa) is the inside sales division in Oracle and it is where I started my Oracle career. I remember that my first role involved putting direct mail in envelopes.... things have moved on a bit since then – for me, for Oracle Direct and in how we interact with our customers. Today, the team of over 1000 people is located in the different Oracle Direct offices around Europe – the main ones are Malaga, Berlin, Prague and Dubai plus the headquarters in Dublin. We work in over 20 languages and are in constant contact with current and future Oracle customers, using the latest internet and telephone technologies to effectively communicate and collaborate with each other, our customers and prospects. One of my areas of responsibility within Oracle Direct is the Sales Programs team. This team of 25 people manages the planning and execution of demand generation, leading the process of finding new and incremental revenue within Oracle Direct. The Sales Programs Managers or ‘SPMs’ are embedded within each of the Oracle Direct sales teams, focussed on distinct geographies or product groups. The SPMs are virtual members of the regional sales management teams, and work closely with the sales and marketing teams to define and deliver demand generation activities. The customer contact elements of these activities are executed via the Oracle Direct Sales and Business Development/Lead Generation teams, to deliver the pipeline required to meet our revenue goals. Activities can range from pan-EMEA joint sales and marketing campaigns, to very localised niche campaigns. The campaigns might focus on particular segments of our existing customers, introducing elements of our evolving solution portfolio which customers may not be familiar with. The Sales Programs team also manages ‘Nurture’ activities to ensure that we develop potential business opportunities with contacts and organisations that do not have immediate requirements. Looking ahead, it is really important that we continue to evolve our ability to add value to our clients and reduce the physical limitations of our distance from them through the innovative application of technology. This enables us to enhance the customer buying experience and to enable the Inside Sales teams to manage ever more complex sales cycles from start to finish. One of my expectations of my team is to actively drive innovation in how we leverage data to better understand our customers, and exploit emerging technologies to better communicate with them. With the rate of innovation and acquisition within Oracle, we need to ensure that existing and potential customers are aware of all we have to offer that relates to their business goals. We need to achieve this via a coherent communication and sales strategy to effectively target the right people using the most effective medium. This is another area where the Sales Programs team plays a key role.

Read the article

Additional new material WebLogic Community

- by JuergenKress

Virtual Developer Conference On Demand - Register Updated Book: WebLogic 12c: Distinctive Recipes - Architecture, Development, Administration by Oracle ACE Director Frank Munz - Blog | YouTube Webcast: Migrating from GlassFish to WebLogic - Replay Reliance Commercial Finance Accelerates Time-to-Market, Improves IT Staff Productivity by 70% - Blog | Oracle Magazine Retrieving WebLogic Server Name and Port in ADF Application by Andrejus Baranovskis, Oracle Ace Director - Blog Using Oracle WebLogic 12c with NetBeans IDEOracle ACE Director Markus Eisele walks you through installing and configuring all the necessary components, and helps you get started with a simple Hello World project. Read the article. Video: Oracle A-Team ADF Mobile Persistence SampleThis video by Oracle Fusion Middleware A-Team architect Steven Davelaar demonstrates how to use the ADF Mobile Persistence Sample JDeveloper extension to generate a fully functional ADF Mobile application that reads and writes data using an ADF BC SOAP web service. Watch the video. Java ME 8 ReleaseDownload Java ME today! This release is an implementation of the Java ME 8 standards JSR 360 (CLDC 8) and JSR 361 (MEEP 8), and includes support of alignment with Java SE 8 language features and APIs, an enhanced services-enabled application platform, the ability to "right-size" the platform to address a wide range of target devices, and more. Learn more Download Java ME SDK 8It includes application development support for Oracle Java ME Embedded 8 platforms and includes plugins for NetBeans 8. See the Java ME 8 Developer Tools Documentation to learn JavaOne 2014 Early Bird RateRegister early to save $400 off the onsite price. With the release of Java 8 this year, we have exciting new sessions and an interactive demo space! NetBeans IDE 8.0 Patch UpdateThe NetBeans Team has released a patch for NetBeans IDE 8.0. Download it today to get fixes that enhance stability and performance. Java 8 Questions ForumFor any questions about this new release, please join the conversation on the Java 8 Questions Forum. Java ME 8: Getting Started with Samples and Demo CodeLearn in few steps how to get started with Java ME 8! The New Java SE 8 FeaturesJava SE 8 introduces enhancements such as lambda expressions that enable you to write more concise yet readable code, better utilize multicore systems, and detect more errors at compile time. See What's New in JDK 8 and the new Java SE 8 documentation portal. Pay Less for Java-Related Books!Save 20% on all new Oracle Press books related to Java. Download the free preview sampler for the Java 8 book written by Herbert Schildt, Maurice Naftain, Henrik Ebbers and J.F. DiMarzio. New book: EJB 3 in Action, Second Edition WebLogic 12c Does WebSockets Getting Started by C2B2 Video: Building Robots with Java Embedded Video: Nighthacking TV Watch presentations by Stephen Chin and community members about Java SE, Java Embedded, Java EE, Hadoop, Robots and more. Migrating the Spring Pet Clinic to Java EE 7 Trip report : Jozi JUG Java Day in Johannesburg How to Build GlassFish 4 from Source 4,000 posts later : The Aquarium WebLogic Partner Community For regular information become a member in the WebLogic Partner Community please visit: http://www.oracle.com/partners/goto/wls-emea ( OPN account required). If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: WebLogic,WebLogic Community,Oracle,OPN,Jürgen Kress

Read the article

The Power to Control Power

- by speakjava

I'm currently working on a number of projects using embedded Java on the Raspberry Pi and Beagle Board. These are nice and small, so don't take up much room on my desk as you can see in this picture. As you can also see I have power and network connections emerging from under my desk. One of the (admittedly very minor) drawbacks of these systems is that they have no on/off switch. Instead you insert or remove the power connector (USB for the RasPi, a barrel connector for the Beagle). For the Beagle Board this can potentially be an issue; with the micro-SD card located right next to the connector it has been known for people to eject the card when trying to power off the board, which can be quite serious for the hardware. The alternative is obviously to leave the boards plugged in and then disconnect the power from the outlet. Simple enough, but a picture of underneath my desk shows that this is not the ideal situation either. This made me think that it would be great if I could have some way of controlling a mains voltage outlet using a remote switch or, even better, from software via a USB connector. A search revealed not much that fit my requirements, and anything that was close seemed very expensive. Obviously the only way to solve this was to build my own.Here's my solution. I decided my system would support both control mechanisms (remote physical switch and USB computer control) and be modular in its design for optimum flexibility. I did a bit of searching and found a company in Hong Kong that were offering solid state relays for 99p plus shipping (£2.99, but still made the total price very reasonable). These would handle up to 380V AC on the output side so more than capable of coping with the UK 240V supply. The other great thing was that being solid state, the input would work with a range of 3-32V and required a very low current of 7.5mA at 12V. For the USB control an Arduino board seemed the obvious low-cost and simple choice. Given the current requirments of the relay, the Arduino would not require the additional power supply and could be powered just from the USB.Having secured the relays I popped down to Homebase for a couple of 13A sockets, RS for a box and an Arduino and Maplin for a toggle switch. The circuit is pretty straightforward, as shown in the diagram (only one output is shown to make it as simple as possible). Originally I used a 2 pole toggle switch to select the remote switch or USB control by switching the negative connections of the low voltage side. Unfortunately, the resistance between the digital pins of the Arduino board was not high enough, so when using one of the remote switches it would turn on both of the outlets. I changed to a 4 pole switch and isolated both positive and negative connections. IMPORTANT NOTE: If you want to follow my design, please be aware that it requires working with mains voltages. If you are at all concerned with your ability to do this please consult a qualified electrician to help you.It was a tight fit, especially getting the Arduino in, but in the end it all worked. The completed box is shown in the photos. The remote switch was pretty simple just requiring the squeezing of two rocker switches and a 9V battery into the small RS supplied box. I repurposed a standard stereo cable with phono plugs to connect the switch box to the mains outlets. I chopped off one set of plugs and wired it to the rocker switches. The photo shows the RasPi and the Beagle board now controllable from the switch box on the desk. I've tested the Arduino side of things and this works fine. Next I need to write some software to provide an interface for control of the outlets. I'm thinking a JavaFX GUI would be in keeping with the total overkill style of this project.

Read the article

Future Of F# At Jazoon 2011

- by Alois Kraus

I was at the Jazoon 2011 in Zurich (Switzerland). It was a really cool event and it had many top notch speaker not only from the Microsoft universe. One of the most interesting talks was from Don Syme with the title: F# Today/F# Tomorrow. He did show how to use F# scripting to browse through open databases/, OData Web Services, Sharepoint, …interactively. It looked really easy with the help of F# Type Providers which is the next big language feature in a future F# version. The object returned by a Type Provider is used to access the data like in usual strongly typed object model. No guessing how the property of an object is called. Intellisense will show it just as you expect. There exists a range of Type Providers for various data sources where the schema of the stored data can somehow be dynamically extracted. Lets use e.g. a free database it would be then let data = DbProvider(http://.....); data the object which contains all data from e.g. a chemical database. It has an elements collection which contains an element which has the properties: Name, AtomicMass, Picture, …. You can browse the object returned by the Type Provider with full Intellisense because the returned object is strongly typed which makes this happen. The same can be achieved of course with code generators that use an input the schema of the input data (OData Web Service, database, Sharepoint, JSON serialized data, …) and spit out the necessary strongly typed objects as an assembly. This does work but has the downside that if the schema of your data source is huge you will quickly run against a wall with traditional code generators since the generated “deserialization” assembly could easily become several hundred MB. *** The following part contains guessing how this exactly work by asking Don two questions **** Q: Can I use Type Providers within C#? D: No. Q: F# is after all a library. I can reference the F# assemblies and use the contained Type Providers? D: F# does annotate the generated types in a special way at runtime which is not a static type that C# could use. The F# type providers seem to use a hybrid approach. At compilation time the Type Provider is instantiated with the url of your input data. The obtained schema information is used by the compiler to generate static types as usual but only for a small subset (the top level classes up to certain nesting level would make sense to me). To make this work you need to access the actual data source at compile time which could be a problem if you want to keep the actual url in a config file. Ok so this explains why it does work at all. But in the demo we did see full intellisense support down to the deepest object level. It looks like if you navigate deeper into the object hierarchy the type provider is instantiated in the background and attach to a true static type the properties determined at run time while you were typing. So this type is not really static at all. It is static if you define as a static type that its properties shows up in intellisense. But since this type information is determined while you are typing and it is not used to generate a true static type and you cannot use these “intellistatic” types from C#. Nonetheless this is a very cool language feature. With the plotting libraries you can generate expressive charts from any datasource within seconds to get quickly an overview of any structured data storage. My favorite programming language C# will not get such features in the near future there is hope. If you restrict yourself to OData sources you can use LINQPad to query any OData enabled data source with LINQ with ease. There you can query Stackoverflow with The output is also nicely rendered which makes it a very good tool to explore OData sources today.

Read the article

Backup SQL Database Federation

- by Herve Roggero

One of the amazing features of Windows Azure SQL Database is the ability to create federations in order to scale your cloud databases. However until now, there were very few options available to backup federated databases. In this post I will show you how Enzo Cloud Backup can help you backup, and restore your federated database easily. You can restore federated databases in SQL Database, or even on SQL Server (as regular databases). Generally speaking, you will need to perform the following steps to backup and restore the federations of a SQL Database: Backup the federation root Backup the federation members Restore the federation root Restore the federation members These actions can be automated using: the built-in scheduler of Enzo Cloud Backup, the command-line utilities, or the .NET Cloud Backup API provided, giving you complete control on how you want to perform your backup and restore operations. Backing up federations Let’s look at the tool to backup federations. You can explore your existing federations by using the Enzo Cloud Backup application as shown below. As you can see, the federation root and the various federations available are shown in separate tabs for convenience. You would first need to backup the federation root (unless you intend to restore the federation member on a local SQL Server database and you don’t need what’s in the federation root). The steps are similar than those to backup a federation member, so let’s proceed to backing up a federation member. You can click on a specific federation member to view the database details by clicking at the tab that contains your federation member. You can see the size currently consumed and a summary of its content at the bottom of the screen. If you right-click on a specific range, you can choose to backup the federation member. This brings up a window with the details of the federation member already filled out for you, including the value of the member that is used to select the federation member. Notice that the list of Federations includes “Federation Root”, which is what you need to select to backup the federation root (you can also do that directly from the root database tab). Once you provide at least one backup destination, you can begin the backup operation. From this window, you can also schedule this operation as a job and perform this operation entirely in the cloud. You can also “filter” the connection, so that only the specific member value is backed up (this will backup all the global tables, and only the records for which the distribution value is the one specified). You can repeat this operation for every federation member in your federation. Restoring Federations Once backed up, you can restore your federations easily. Select the backup device using the tool, then select Restore. The following window will appear. From here you can create a new root database. You can also view the backup properties, showing you exactly which federations will be created. Under the Federations tab, you can select how the federations will be created. I chose to recreate the federations and let the tool perform all the SPLIT operations necessary to recreate the same number of federation members. Other options include to create the first federation member only, or not to create the federation members at all. Once the root database has been restored and the federation members have been created, you can restore the federation members you previously backed up. The screen below shows you how to restore a backup of a federation member into a specific federation member (the details of the federation member are provided to make it easier to identify). Conclusion This post gave you an overview on how to backup and restore federation roots and federation members. The backup operations can be setup once, then scheduled daily.

Read the article

Going by the eBook

- by Tony Davis

The book and magazine publishing world is rapidly going digital, and the industry is faced with making drastic changes to their ways of doing business. The sudden take-up of digital readers by the book-buying public has surprised even the most technological-savvy of the industry. Printed books just aren't selling like they did. In contrast, eBooks are doing well. The ePub file format is the standard around which all publishers are converging. ePub is a standard for formatting book content, so that it can be reflowed for various devices, with their widely differing screen-sizes, and can be read offline. If you unzip an ePub file, you'll find familiar formats such as XML, XHTML and CSS. This is both a blessing and a curse. Whilst it is good to be able to use familiar technologies that have been developed to a level of considerable sophistication, it doesn't get us all the way to producing a viable publication. XHTML is a page-description language, not a book-description language, as we soon found out during our initial experiments, when trying to specify headers, footers, indexes and chaptering. As a result, it is difficult to predict how any particular eBook application will decide to render a book. There isn't even a consensus as to how the cover image is specified. All of this is awkward for the publisher. Each book must be created and revised in a form from which can be generated a whole range of 'printed media', from print books, to Mobi for kindles, ePub for most Tablets and SmartPhones, HTML for excerpted chapters on websites, and a plethora of other formats for other eBook readers, each with its own idiosyncrasies. In theory, if we can get our content into a clean, semantic XML form, such as DOCBOOKS, we can, from there, after every revision, perform a series of relatively simple XSLT transformations to output anything from a HTML article, to an ePub file for reading on an iPad, to an ICML file (an XML-based file format supported by the InDesign tool), ready for print publication. As always, however, the task looks bigger the closer you get to the detail. On the way to the utopian world of an XML-based book format that encompasses all the diverse requirements of the different publication media, ePub looks like a reasonable format to adopt. Its forthcoming support for HTML 5 and CSS 3, with ePub 3.0, means that features, such as widow-and-orphan controls, multi-column flow and multi-media graphics can be incorporated into eBooks. This starts to make it possible to build an "app-like" experience into the eBook and to free publishers to think of putting context before container; to think of what content is required, be it graphical, textual or audio, from the point of view of the user, rather than what's possible in a given, traditional book "Container". In the meantime, there is a gap between what publishers require and what current technology can provide and, of course building this app-like experience is far from plain sailing. Real portability between devices is still a big challenge, and achieving the sort of wizardry seen in the likes of Theodore Grey's "Elements" eBook will require some serious device-specific programming skills. Cheers, Tony.

Read the article

ArchBeat Link-o-Rama Top 10 for October 2012

- by Bob Rhubart

The Top 10 most popular items shared on the OTN ArchBeat Facebook Page for October 2012. OAM/OVD JVM Tuning | @FusionSecExpert Vinay from the Oracle Fusion Middleware Architecture Group (known as the A-Team) shares a process for analyzing and improving performance in Oracle Virtual Directory and Oracle Access Manager. SOA Galore: New Books for Technical Eyes Only Shake up up your technical skills with this trio of new technical books from community members covering SOA and BPM. Clustering ODI11g for High-Availability Part 1: Introduction and Architecture | Richard Yeardley "JEE agents can be deployed alongside, or instead of, standalone agents," says Rittman Meade's Richard Yeardley. "But there is one key advantage in using JEE agents and WebLogic – when you deploy JEE agents as part of a WebLogic cluster they can be configured together to form a high availability cluster." Learn more in Yeardley's extensive post. Solving Big Problems in Our 21st Century Information Society | Irving Wladawsky-Berger "I believe that the kind of extensive collaboration between the private sector, academia and government represented by the Internet revolution will be the way we will generally tackle big problems in the 21st century. Just as with the Internet, governments have a major role to play as the catalyst for many of the big projects that the private sector will then take forward and exploit. The need for high bandwidth, robust national broadband infrastructures is but one such example." -- Irving Wladawsky-Berger Eventually, 90% of tech budgets will be outside IT departments | ZDNet Another interesting post from ZDNet blogger Joe McKendrick about changing roles in IT. ADF Mobile - Login Functionality | Andrejus Baranovskis "The new ADF Mobile approach with native deployment is cool when you want to access phone functionality (camera, email, sms and etc.), also when you want to build mobile applications with advanced UI," reports Oracle ACE Director Andrejus Baranovskis. Podcast: Are You Future Proof? - Part 2 In Part 2, practicing architects and Oracle ACE Directors Ron Batra (AT&T), Basheer Khan (Innowave Technology), and Ronald van Luttikhuizen (Vennster) discuss re-tooling one’s skill set to reflect changes in enterprise IT, including the knowledge to steer stakeholders around the hype to what's truly valuable. ADF Mobile Custom Javascript — iFrame Injection | John Brunswick The ADF Mobile Framework provides a range of out of the box components to add within your AMX pages, according to John Brunswick. But what happens when "an out of the box component does not directly fulfill your development need? What options are available to extend your application interface?" John has an answer. Oracle Solaris 11.1 update focuses on database integration, cloud | Mark Fontecchio TechTarget editor Mark Fontecchio reports on the recent Oracle Solaris 11.1 release, with comments from IDC's Al Gillen. Architects Matter: Making sense of the people who make sense of enterprise IT Why do architects matter? Oracle Enterprise Architect Eric Stephens suggests that you ask yourself this question the next time you take the elevator to the Oracle offices on the 45th floor of the Willis Tower in Chicago, Illinois (or any other skyscraper, for that matter). If you had to take the stairs to get to those offices, who would you blame? "You get the picture," he says. "Architecture is essential for any necessarily complex structure, be it a building or an enterprise." (Read the article) Thought for the Day "I will contend that conceptual integrity is the most important consideration in system design. It is better to have a system omit certain anomalous features and improvements, but to reflect one set of design ideas, than to have one that contains many good but independent and uncoordinated ideas." — Frederick P. Brooks Source: SoftwareQuotes.com

Read the article

Nokia Lumia 920 Windows Phone 8 Announcement

- by Tim Murphy

Today Nokia and Microsoft had an event to officially introduce the Lumia 920. Below is a rundown of some of the things I found interesting. As a person who likes photography there was a lot to drool over. The main feature that caught my attention was PureView with its optical stabilization. This alone should improve the majority of you pictures. Add to that the SmartShoot Object remover that uses multiple images to remove unwanted people or objects that move through your picture and you never have to accept reality again. For the most part the lenses concept introduced in Windows Phone 8 just makes the usability of leveraging camera better. Of course that is Microsoft’s selling point. One lens that caught my attention was the Bing lens. I have to say it is about time that we can take pictures and use them to search for answers using Bing. There were a couple of features shown that involved augmented reality. One was similar to the yapf application that is already in the market which overlays restaurants and other destination over live camera views. The other was using the navigation directions with a live view. Then you get down to some of the physical features of the Lumia 920. The one that got the most stage time is that it has a great 2000mah battery which can be charged wirelessly. They also pointed out the improved glare reduction of the 4.5 in. curved glass screen. This hardware improvement is improved further with software that detects glare conditions and adjusts the display attributes to enhance viewing ease. Adding to the wireless cool factor of the Lumia 920 is the general NFC capabilities. This was demonstrated with NFC docking stations as well as JBL speakers and headphones. There was one more hardware feature that I applauded. The super sensitive touch screen did away with one of my pet peeves with capacitive touch screens. You will never have to remove you gloves to operate your phone again. The mittens that they did the demo with looked more like boxing gloves. I was disappointed with Joe Belfiore said that they were only going to show a couple of new features of the Windows Phone 8 and would hear more at future events. One of the things he did show is the ability to customize which buttons you preferred as defaults in IE10. For example you could have the folders button where the refresh button normally is. He also showed that at long last you can natively take screenshots on your phone. Hopefully he will be back quickly to give us the rest of the features. The most disappointing part of the event was that we never found out when they would be released or how much they would cost. Let’s hope this comes soon. Even with these couple of items still left on my wish list I can’t wait to get my hands on a Lumia 920. del.icio.us Tags: Windows Phone,Windows Phone 8,Nokia,Lumia,Lumia 920,Microsoft

Read the article

Taking HRMS to the Cloud to Simplify Human Resources Management

- by HCM-Oracle

By Anke Mogannam With human capital management (HCM) a top-of-mind issue for executives in every industry, human resources (HR) organizations are poised to have their day in the sun—proving not just their administrative worth but their strategic value as well. To make good on that promise, however, HR must modernize. Indeed, if HR is to act as an agent of change—providing the swift reallocation of employees and the rapid absorption of employee data required for enterprises to shift course on a dime—it must first deal with the disruptive change at its own front door. And increasingly, that means choosing the right technology and human resources management system (HRMS) for managing the entire employee lifecycle. Unfortunately, for most organizations, this task has proved easier said than done. This is because while much has been written about advances in HRMS technology, until recently, most of those advances took the form of disparate on-premises solutions designed to serve very specific purposes. Although this may have resulted in key competencies in certain areas, it also meant that processes for core HR functions like payroll and benefits were being carried out in separate systems from those used for talent management, workforce optimization, training, and so on. With no integration—and no single system of record—processes were disconnected, ease of use was impeded, user experience was diminished, and vital data was left untapped. Today, however, that scenario has begun to change, and end-to-end cloud-based HCM solutions have moved from wished-for innovations to real-life solutions. Why, then, have HR organizations been so slow in adopting them? The answer—it would seem—is, “It’s complicated.” So complicated, in fact, that 45 percent of the respondents to PwC’s “Annual HR Technology Survey” (for 2013) reported having no formal HR software roadmap, and 40 percent stated that they “did not know” whether their organizations would be increasing their use of cloud or software as a service (SaaS) for HR. Clearly, HR organizations need help sorting through the morass of HR software options confronting them. But just as clearly, there’s an enormous opportunity awaiting those that do. The trick will come in charting a course that allows HR to leverage existing technology while investing in the cloud-based solutions that will deliver the end-to-end processes, easy-to-understand analytics, and superior adaptability required to simplify—and add value to—every aspect of employee management. The Opportunity therefore is to cut costs, drive Innovation, and increase engagement by moving to cloud-based HCM. Then you will benefit from one Interface, leverage many access points, and gain at-a-glance insight across your entire workforce. With many legacy on-premises HR systems not being efficient anymore and cloud-based, integrated systems that span the range of HR functions finally reaching maturity, the time is ripe for moving core HR to the cloud. Indeed, for the first time ever there are more HRMS replacement initiatives than HRMS upgrade initiatives under way, and the majority of them involve moving to the cloud per Cedar Crestone’s 2013-2014 HRMS survey. To learn how you can launch your own cloud HCM initiative and begin using HR to power the enterprise, visit Oracle HRMS in the Cloud and Oracle’s new customer 2 cloud program. Anke Mogannam brings more than 16 years of marketing and human capital management experience in the technology industries to her role at Oracle where she is part of the Human Capital Management applications marketing team. In that role, Anke drives content marketing, messaging, go-to-market activities, integrated marketing campaigns, and field enablement. Prior to joining Oracle, Anke held several roles in communications, marketing, HCM product strategy and product management at PeopleSoft, SAP, Workday and Saba. Follow her on Twitter @amogannam

Read the article

Openmatics Revolutionizes Fleet Management with Standards-Based Vehicle Telematics Platform

- by Michael Snow

Openmatics s.r.o. was founded in 2010 as a subsidiary of ZF Friedrichshafen AG, a global player in driveline and chassis technology. Oracle Customer: Openmatics s.r.o.Location: Pilsen, Czech RepublicIndustry: AutomotiveEmployees: 70 Its goal was to develop and operate a flexible, open telematics platform for automotive applications, which is independent from vehicle and component suppliers—recognizing that the fragmented telematics market was not meeting today’s fleet management needs. Openmatics provides a rich product portfolio, and customers can extend the platform, as required, to meet their needs. Partners and third-parties can develop their own applications using the Openmatics’ software development kit and can sell them via the Openmatics app shop.ZF Friedrichshafen AG is a global player in driveline and chassis technology. With 121 production companies and 650 service partners in 26 countries, ZF is among the top 10 largest automotive suppliers worldwide. Founded in 1915 to develop and produce transmissions for airships and vehicles, the group’s product offerings now include transmissions and steering systems as well as chassis components and complete axle systems and modules. A word from Openmatics s.r.o. “Oracle WebCenter Portal, together with the underlying Oracle Application Development Framework, provided the fundamental infrastructure for the Openmatics platform. Fleet managers can now reduce fuel consumption and operating costs, and more efficiently manage vehicle usage, maintenance, and safety. The standards-based platform allows third-party suppliers to deploy their own vehicle telematics services as Openmatics apps and creates a de facto standard for the automotive industry, independent from a single manufacturer or service provider.” – Gero Strobel, Head of Development, Openmatics s.r.o. Challenges Create an industry standard for vehicle telematics by establishing a customizable platform that enables access to telematics information, such as current and past fuel consumption, through a web browser to better meet automotive market and customer needs Reduce fleet-management costs by eliminating the need to invest in isolated telematics hardware and software solutions per vehicle brand and vehicle component manufacturer Establish an open platform where third-party providers—such as original equipment manufacturers (OEM), insurers, fleet operators, and individual developers—can deploy their own vehicle telematics services Allow users to purchase targeted telematics services as single apps to reduce costs and ensure rapid growth of telematics services available on the platform Enable users to configure their telematics apps with ease to make sure the platform meets individual fleet management requirements, such as analyzing past and current fuel consumption of a truck fleet Solutions Deployed Oracle WebCenter Portal as a foundation for Openmatics, a standards-based automotive telematics platform that provides next-generation fleet management with unified digital communication from and to vehicles on the move Used Oracle Application Development Framework as the development framework for Oracle WebCenter Portal’s components and services, providing developers with ready-to-use software development kits with application programming interfaces, design templates, and visual tools that accelerated time to market Used Oracle Enterprise Pack for Eclipse to simplify telematics application development in Java Enabled fleet monitoring by recording vehicle data—such as fuel consumption information—through onboard units, delivering the information to Oracle Database, and making it accessible through a customizable app portfolio on any web browser Stored vehicle telematics data—sent as encrypted information—in Oracle Database, ensuring data integrity and immediate availability for the platform’s telematics applications Enabled a wide range of telematics services suppliers, from vehicle component manufacturers to fleet application developers, to offer vehicle telematics services on the Openmatics platform, ensuring platform independence from OEMs Provided Openmatics customers with the means to individually select the automotive telematics services that are relevant to their business requirements, eliminating the need to pay for superfluous information and reducing fleet management costs Oracle Products & Services Oracle Application Development Framework Oracle WebCenter Portal Oracle SOA Suite Oracle Enterprise Pack for Eclipse Oracle Database Oracle Consulting &amp;amp;amp;amp;amp;amp;&amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;quot;&amp;amp;amp;amp;gt;&amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;gt;amp;&amp;amp;amp;amp;amp;lt;span id=&amp;amp;amp;amp;amp;quot;XinhaEditingPostion&amp;amp;amp;amp;amp;quot;&amp;amp;amp;amp;amp;gt;&amp;amp;amp;amp;amp;lt;/span&amp;amp;amp;amp;amp;gt;lt;p&amp;amp;amp;amp;amp;amp;amp;gt; &amp;amp;amp;amp;amp;amp;amp;lt;/p&amp;amp;amp;amp;amp;amp;amp;gt;

Read the article

Construction Paper, Legos, and Architectural Modeling

I can remember as a kid playing with construction paper and Legos to explore my imagination. Through my exploration I was able to build airplanes, footballs, guns, and more, out of paper. Additionally I could create entire cities, robots, or anything else I could image out of Legos. These toys, I now realize were in fact tools that gave me an opportunity to explore my ideas in the physical world through the use of modeling. My imagination was allowed to run wild as I, unknowingly at the time, made design decisions that directly affected the models I was building from the raw materials. To prove my point further, I can remember building a paper airplane that seemed to go nowhere when I tried to throw it. So I decided to attach a paper clip to the plane before I decided to throw it the next time to test my concept that by adding more weight to the plane that it would fly better and for longer distances. The paper airplane allowed me to model my design decision through the use of creating an artifact in that I created a paper airplane that was carrying extra weight through the incorporation of the paper clip in to the design. Also, I remember using Legos to build all sorts of creations, and these creations became artifacts of my imagination. As I further and further defined my Lego creations through the process of playing I was able to create elaborate artifacts of my imagination. These artifacts represented design decision I had made in the evolution of my creation through my child like design process. In some form or fashion the artifacts I created as a kid are very similar to the artifacts that I create when I model a software architectural concept or a software design in that the process of making decisions is directly translated in to a tangible model in the form of an architectural model. Architectural models have been defined as artifacts that depict design decisions of a system’s architecture. The act of creating architectural models is the act of architectural modeling. Furthermore, architectural modeling is the process of creating a physical model based architectural concepts and documenting these design decisions. In the process of creating models, the standard notation used is Architectural modeling notation. This notation is the primary method of capturing the essence of design decisions regarding architecture. Modeling notations can vary based on the need and intent of a project; typically they range from natural language to a diagram based notation. Currently, Unified Markup Language (UML) is the industry standard in terms of architectural modeling notation because allows for architectures to be defined through a series of boxes, lines, arrows and other basic symbols that encapsulate design designs in to virtual components, connectors, configurations and interfaces. Furthermore UML allows for additional break down of models through the use of natural language as to explain each section of the model in plain English. One of the major factors in architectural modeling is to define what is to be modeled. As a basic rule of thumb, I tend to model architecture based on the complexity of systems or sub sub-systems of architecture. Another key factor is the level of detail that is actually needed for a model. For example if I am modeling a system for a CEO to view then the low level details will be omitted. In comparison, if I was modeling a system for another engineer to actually implement I would include as much detailed information as I could to help the engineer implement my design.

Read the article

Consumer Oriented Search In Oracle Endeca Information Discovery – Part 1

- by Bob Zurek

Information Discovery, a core capability of Oracle Endeca Information Discovery, enables business users to rapidly search, discover and navigate through a wide variety of big data including structured, unstructured and semi-structured data. One of the key capabilities, among many, that differentiate our solution from others in the Information Discovery market is our deep support for search across this growing amount of varied big data. Our method and approach is very different than classic simple keyword search that is found in may information discovery solutions. In this first part of a series on the topic of search, I will walk you through many of the key capabilities that go beyond the simple search box that you might experience in products where search was clearly an afterthought or attempt to catch up to our core capabilities in this area. Lets explore. The core data management solution of Oracle Endeca Information Discovery is the Endeca Server, a hybrid search-analytical database that his highly scalable and column-oriented in nature. We will talk in more technical detail about the capabilities of the Endeca Server in future blog posts as this post is intended to give you a feel for the deep search capabilities that are an integral part of the Endeca Server. The Endeca Server provides best-of-breed search features aw well as a new class of features that are the first to be designed around the requirement to bridge structured, semi-structured and unstructured big data. Some of the key features of search include type a heads, automatic alphanumeric spell corrections, positional search, Booleans, wildcarding, natural language, and category search and query classification dialogs. This is just a subset of the advanced search capabilities found in Oracle Endeca Information Discovery. Search is an important feature that makes it possible for business users to explore on the diverse data sets the Endeca Server can hold at any one time. The search capabilities in the Endeca server differ from other Information Discovery products with simple “search boxes” in the following ways: The Endeca Server Supports Exploratory Search. Enterprise data frequently requires the user to explore content through an ad hoc dialog, with guidance that helps them succeed. This has implications for how to design search features. Traditional search doesn’t assume a dialog, and so it uses relevance ranking to get its best guess to the top of the results list. It calculates many relevance factors for each query, like word frequency, distance, and meaning, and then reduces those many factors to a single score based on a proprietary “black box” formula. But how can a business users, searching, act on the information that the document is say only 38.1% relevant? In contrast, exploratory search gives users the opportunity to clarify what is relevant to them through refinements and summaries. This approach has received consumer endorsement through popular ecommerce sites where guided navigation across a broad range of products has helped consumers better discover choices that meet their, sometimes undetermined requirements. This same model exists in Oracle Endeca Information Discovery. In fact, the Endeca Server powers many of the most popular e-commerce sites in the world. The Endeca Server Supports Cascading Relevance. Traditional approaches of search reduce many relevance weights to a single score. This means that if a result with a good title match gets a similar score to one with an exact phrase match, they’ll appear next to each other in a list. But a user can’t deduce from their score why each got it’s ranking, even though that information could be valuable. Oracle Endeca Information Discovery takes a different approach. The Endeca Server stratifies results by a primary relevance strategy, and then breaks ties within a strata by ordering them with a secondary strategy, and so on. Application managers get the explicit means to compose these strategies based on their knowledge of their own domain. This approach gives both business users and managers a deterministic way to set and understand relevance. Now that you have an understanding of two of the core search capabilities in Oracle Endeca Information Discovery, our next blog post on this topic will discuss more advanced features including set search, second-order relevance as well as an understanding of faceted search mechanisms that include queries and filters.

Read the article

It happens only at Devoxx ...

- by arungupta

After attending several Java conferences world wide, this was my very first time at Devoxx. Here are some items I found that happens only at Devoxx ... Pioneers of theater-style seating - This not only provides comfortable seating for each attendee but the screens are very clearly visible to everybody in the room. Intellectual level of attendees is very high - Read more explanation on the Java EE 6 lab blog. In short, a lab, 1/3 of the content delivered at Devoxx 2011, could not be completed at other developer days in more than 1/3 the time. Snack box for lunches - Even though this suits well to the healthy lifestyle of multiple-snacks-during-a-day style but leaves attendees hungry sooner in the day. The longer breaks before the next snack in the evening does not help at all. Fortunately, Azure cupcakes and Android ice creams turned out to be handy. I finally carried my own apple :-) Wrist band instead of lanyard - The good part about this is that once tied to your hand then you are less likely to forget in your room. But OTOH you are a pretty much a branded conference attendee all through out the city. It was cost effective as it costed 20c as opposed to 1 euro for the lanyard. Live streaming from theater #8 (the biggest room) on parleys.com All talks recorded and released on parleys.com over next year. This allows attendees to not to miss any session and watch replay at their own leisure. Stephan promised to start sharing the sessions by mid December this year. No need to pre-register for a session - This is true for most of the conferences but bigger rooms (+ overflow room for key sessions) provide sufficient space for all those who want to attend the session. And of course all sessions are available on parleys.com anyway! Community votes on whiteboard - Devoxx attendees gets a chance to vote on topics ranging from their favorite non-Java language, operating system, or love from Oracle. Captured pictures at the end of Day 2 are shown below. Movie on the last but one night - This year it was The Adventures of Tintin and was lots of fun. Fries with mayo - This is a typical Belgian thing. Guys going in ladies room to avoid the long queues ... wow! Tweet wall everywhere and I mean literally everywhere, in rooms, hallways, front desk, and other places. The tweet picking algorithm was not very clear as I never saw my tweet appear on the wall ;-) You can also watch it at wall.devoxx.com. Cozy speaker dinner with great food and wine List of parallel and upcoming sessions displayed on the screen - This makes the information more explicit with the attendees. REST API with multiple mobile clients - This API is also used by some other conferences as well. And there always is iphone.devoxx.com. Steering committee members were recognized multiple times. The committee members were clearly identifiable wearing red hoodies. The wireless SSID was intuitive "Devoxx" but hidden to avoid some crap from Microsoft Windows. All of 9000 addresses were used up most of the times with each attendee having multiple devices. A 1 GB fibre optic cable was stretched to Metropolis to support the required network bandwidth. Stephan is already planning to upgrade the equipment and have a better infrastructure next year. Free water, soda, juice in a cooler Kinect connected to TV screens so that attendees can use their hands to browse through the list of sesssions. #devoxxblog, #devoxxwomen, #devoxxfrance, #devoxxgreat, #devoxxsuggestions And Devoxx attendees are called Devoxxians ... how cool is that ? :-) What other things do you think happen only at Devoxx ? And now the pictures from the community whiteboard: And a more complete album (including bigger pics of community votes) is available below:

Read the article

Graphics trouble after resuming from hibernate or suspend

- by Voyagerfan5761

I have a Dell Inspiron 2650 (with NVidia graphics, using nouveau drivers) that I'm using to try out Ubuntu. It's all great, except that Hibernate and Suspend aren't usable. Yes, I know that questions about power-save issues are rampant in the Linux support universe, but it seems that every time I find a solution it's for a very specific hardware combination and doesn't apply to me. So anyway, here goes. When I resume from either power-saving mode, I'll get graphics problems anywhere on the range from a few scattered random-colored pixels that won't change; all the way to full-screen patterns that don't change as I move the mouse, hit keys on the keyboard, or even bring up the shutdown dialog using the power button. Those full-screen issues (which may involve stripes with random pixels, partial black screen, or both) always end in me forcing the machine to shut down by holding the power button. I haven't done much testing yet to determine what severity level is most commonly associated with each mode, but I do avoid using either power-save option because of these issues. I'll add info on my hardware as I can gather it (no home internet connection, and this laptop is tethered to my desk by a dead battery and casing degradation). Please feel free to request something specific in the question comments. Hardware Info See this hardinfo report for my system's hardware configuration. (No, my username is not "myuser"; I sanitized hardinfo's output before publishing it.) Screenshots These screenshots are from a relatively mild occurrence, which happened after the second hibernation I took that session. The first one worked great, though I used the wireless card and Firefox heavily between the two hibernation attempts. Take a look at what happened when I opened my home directory in Nautilus and scrolled it: See below for the situations I've tested so far. The real trouble comes when the machine resumes to an unusable state; in such cases I can't even unlock the screen or properly reboot, much less take a screenshot. I have a hunch that putting a CD in the drive will cause such major failures, and I will try that at some point; see related question. Situations Tested Maverick (10.10) Suspend Seems to suspend nicely with nothing running Seems to suspend nicely with flash drive plugged in On resume from suspend with no flash drive, Terminal and gedit running: Funky graphics on top of log output, then blank screen with pixelated cursor; no response to power button (normally will shutdown 60 seconds later) Hibernate Seems to hibernate nicely with nothing running Seems to hibernate nicely with a few apps (Terminal, Mouse preferences) running Seems to not hibernate when flash drive plugged in Seems to not hibernate when System Monitor is running Have encountered failed hibernation (after several hours and one successful hibernate/thaw cycle) with no external media connected and no programs running except normal background stuff Natty LiveCD (11.04_2010-12-22) When I tested it, Natty wouldn't stay logged in. It played part of the login sound and then [ OK ] appeared in the top right corner (white-on-black terminal text) for a few seconds. Then it kicked me back to the Unlock screen. It did that four times before I gave up and just tested suspend from the Unlock screen. Suspend Resumed to vertical gray and black lines 2px (?) wide, then shifted to vertical "jail bars" of black over a black screen with above-described random pixels and mouse pointer. No apparent response to input from mouse (clicking randomly). Keyboard and touchpad unrecognized.

Read the article

Fetching Partition Information

- by Mike Femenella

For a recent SSIS package at work I needed to determine the distinct values in a partition, the number of rows in each partition and the file group name on which each partition resided in order to come up with a grouping mechanism. Of course sys.partitions comes to mind for some of that but there are a few other tables you need to link to in order to grab the information required. The table I’m working on contains 8.8 billion rows. Finding the distinct partition keys from this table was not a fast operation. My original solution was to create a temporary table, grab the distinct values for the partitioned column, then update via sys.partitions for the rows and the $partition function for the partitionid and finally look back to the sys.filegroups table for the filegroup names. It wasn’t pretty, it could take up to 15 minutes to return the results. The primary issue is pulling distinct values from the table. Queries for distinct against 8.8 billion rows don’t go quickly. A few beers into a conversation with a friend and we ended up talking about work which led to a conversation about the task described above. The solution was already built in SQL Server, just needed to pull it together. The first table I needed was sys.partition_range_values. This contains one row for each range boundary value for a partition function. In my case I have a partition function which uses dayid values. For example July 4th would be represented as an int, 20130704. This table lists out all of the dayid values which were defined in the function. This eliminated the need to query my source table for distinct dayid values, everything I needed was already built in here for me. The only caveat was that in my SSIS package I needed to create a bucket for any dayid values that were out of bounds for my function. For example if my function handled 20130501 through 20130704 and I had day values of 20130401 or 20130705 in my table, these would not be listed in sys.partition_range_values. I just created an “everything else” bucket in my ssis package just in case I had any dayid values unaccounted for. To get the number of rows for a partition is very easy. The sys.partitions table contains values for each partition. Easy enough to achieve by querying for the object_id and index value of 1 (the clustered index) The final piece of information was the filegroup name. There are 2 options available to get the filegroup name, sys.data_spaces or sys.filegroups. For my query I chose sys.filegroups but really it’s a matter of preference and data needs. In order to bridge between sys.partitions table and either sys.data_spaces or sys.filegroups you need to get the container_id. This can be done by joining sys.allocation_units.container_id to the sys.partitions.hobt_id. sys.allocation_units contains the field data_space_id which then lets you join in either sys.data_spaces or sys.file_groups. The end result is the query below, which typically executes for me in under 1 second. I’ve included the join to sys.filegroups and to sys.dataspaces, and I’ve just commented out the join sys.filegroups. As I mentioned above, this shaves a good 10-15 minutes off of my original ssis package and is a really easy tweak to get a boost in my ETL time. Enjoy.

Read the article

Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect

- by user287529

Ubuntu 12.04 host – Virtualbox 4.1.12 Guest=Windows 7 – Network will not connect. I'm using Ubuntu 12.04 on an Acer Aspire 5742-7645 laptop with 4GB memory, Intel Core i3 processor, Intel HD Graphics, DVD drive, 802.1 b/g/n, and 500 GB HD. I connect to my router via a wireless connection. I have installed Virutalbox 4.1.12 from the Ubuntu Software Center and installed Guest additions 4.1.12 in the Windows 7 guest session. I have Windows XP and Windows 7 installed as guests in Virtual box The network settings are different for XP and 7 – see below. Network Settings XP guest = Adapter 1: PCnet-FAST III (NAT) - Network works perfectly and has worked well for several years. Network Settings Win 7 = Adapter 1: Intel PRO/1000 MT Desktop (Bridged adapter, eth1) Promiscuous Mode = allow all Cable connected = checked When I originally installed Windows 7, I tried NAT and the guest network would not connect. Once I changed the setting to the above (Bridged) the Network worked perfectly. However, what I believe is after updates (not sure if it was an Ubuntu or Windows update) the guest network stopped working and I can not get it to connect. Interfaces file content auto lo iface lo inet loopback Ifconfig yields lou@lou-Aspire-5742:~$ ifconfig eth0 Link encap:Ethernet HWaddr 1c:75:08:09:f6:5c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 eth1 Link encap:Ethernet HWaddr 4c:0f:6e:7c:9f:01 inet addr:192.168.1.104 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::4e0f:6eff:fe7c:9f01/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:18095 errors:2 dropped:0 overruns:0 frame:24344 TX packets:9281 errors:47 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5301926 (5.3 MB) TX bytes:1441885 (1.4 MB) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3208 errors:0 dropped:0 overruns:0 frame:0 TX packets:3208 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:294088 (294.0 KB) TX bytes:294088 (294.0 KB) Ipconfig yields the following: Windows IP Configuration Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Link-local IPv6 Address . . . . . : fe80::38ba:dbca:a21d:c3d1%13 Autoconfiguration IPv4 Address. . : 169.254.195.209 Subnet Mask . . . . . . . . . . . : 255.255.0.0 Default Gateway . . . . . . . . . : Tunnel adapter isatap.{B292E440-679D-4FC5-8E34-77D6804669C8}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Tunnel adapter Local Area Connection* 11: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : I'm not sure what else to do. Can someone provide the troubleshooting steps to determine what the problem is and possible solution?

Read the article

Finding Leaders Breakfasts - Adelaide and Perth

- by rdatson-Oracle

HR Executives Breakfast Roundtables: Find the best leaders using science and social media! Perth, 22nd July & Adelaide, 24th July What is leadership in the 21st century? What does the latest research tell us about leadership? How do you recognise leadership qualities in individuals? How do you find individuals with these leadership qualities, hire and develop them? Join the Neuroleadership Institute, the Hay Group, and Oracle to hear: 1. the latest neuroscience research about human bias, and how it applies to finding and building better leaders; 2. the latest techniques to recognise leadership qualities in people; 3. and how you can harness your people and social media to find the best people for your company. Reflect on your hiring practices at this thought provoking breakfast, where you will be challenged to consider whether you are using best practices aimed at getting the right people into your company. Speakers Abigail Scott, Hay Group Abigail is a UK registered psychologist with 10 years international experience in the design and delivery of talent frameworks and assessments. She has delivered innovative assessment programmes across a range of organisations to identify and develop leaders. She is experienced in advising and supporting clients through new initiatives using evidence-based approach and has published a number of research papers on fairness and predictive validity in assessment. Karin Hawkins, NeuroLeadership Institute Karin is the Regional Director of NeuroLeadership Institute’s Asia-Pacific region. She brings over 20 years experience in the financial services sector delivering cultural and commercial results across a variety of organisations and functions. As a leadership risk specialist Karin understands the challenge of building deep bench strength in teams and she is able to bring evidence, insight, and experience to support executives in meeting today’s challenges. Robert Datson, Oracle Robert is a Human Capital Management specialist at Oracle, with several years as a practicing manager at IBM, learning and implementing latest management techniques for hiring, deploying and developing staff. At Oracle he works with clients to enable best practices for HR departments, and drawing the linkages between HR initiatives and bottom-line improvements. Agenda 07:30 a.m. Breakfast and Registrations 08:00 a.m. Welcome and Introductions 08:05 a.m. Breaking Bias in leadership decisions - Karin Hawkins 08:30 a.m. Identifying and developing leaders - Abigail Scott 08:55 a.m. Finding leaders, the social way - Robert Datson 09:20 a.m. Q&A and Closing Remarks 09:30 a.m. Event concludes If you are an employee or official of a government organisation, please click here for important ethics information regarding this event. To register for Perth, Tuesday 22nd July, please click HERE To register for Adelaide, Thursday 24th July, please click HERE 1024x768 Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 -"/ /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Contact: To register or have questions on the event? Contact Aaron Tait on +61 2 9491 1404

Read the article

Same SELECT used in an INSERT has different execution plan

- by amacias

A customer complained that a query and its INSERT counterpart had different execution plans, and of course, the INSERT was slower. First lets look at the SELECT : SELECT ua_tr_rundatetime, ua_ch_treatmentcode, ua_tr_treatmentcode, ua_ch_cellid, ua_tr_cellid FROM (SELECT DISTINCT CH.treatmentcode AS UA_CH_TREATMENTCODE, CH.cellid AS UA_CH_CELLID FROM CH, DL WHERE CH.contactdatetime > SYSDATE - 5 AND CH.treatmentcode = DL.treatmentcode) CH_CELLS, (SELECT DISTINCT T.treatmentcode AS UA_TR_TREATMENTCODE, T.cellid AS UA_TR_CELLID, T.rundatetime AS UA_TR_RUNDATETIME FROM T, DL WHERE T.treatmentcode = DL.treatmentcode) TRT_CELLS WHERE CH_CELLS.ua_ch_treatmentcode(+) = TRT_CELLS.ua_tr_treatmentcode; The query has 2 DISTINCT subqueries. The execution plan shows one with DISTICT Placement transformation applied and not the other. The view in Step 5 has the prefix VW_DTP which means DISTINCT Placement. -------------------------------------------------------------------- | Id | Operation | Name | Cost (%CPU) -------------------------------------------------------------------- | 0 | SELECT STATEMENT | | 272K(100) |* 1 | HASH JOIN OUTER | | 272K (1) | 2 | VIEW | | 4408 (1) | 3 | HASH UNIQUE | | 4408 (1) |* 4 | HASH JOIN | | 4407 (1) | 5 | VIEW | VW_DTP_48BAF62C | 1660 (2) | 6 | HASH UNIQUE | | 1660 (2) | 7 | TABLE ACCESS FULL | DL | 1644 (1) | 8 | TABLE ACCESS FULL | T | 2744 (1) | 9 | VIEW | | 267K (1) | 10 | HASH UNIQUE | | 267K (1) |* 11 | HASH JOIN | | 267K (1) | 12 | PARTITION RANGE ITERATOR| | 266K (1) |* 13 | TABLE ACCESS FULL | CH | 266K (1) | 14 | TABLE ACCESS FULL | DL | 1644 (1) -------------------------------------------------------------------- Query Block Name / Object Alias (identified by operation id): ------------------------------------------------------------- 1 - SEL$1 2 - SEL$AF418D5F / TRT_CELLS@SEL$1 3 - SEL$AF418D5F 5 - SEL$F6AECEDE / VW_DTP_48BAF62C@SEL$48BAF62C 6 - SEL$F6AECEDE 7 - SEL$F6AECEDE / DL@SEL$3 8 - SEL$AF418D5F / T@SEL$3 9 - SEL$2 / CH_CELLS@SEL$1 10 - SEL$2 13 - SEL$2 / CH@SEL$2 14 - SEL$2 / DL@SEL$2 Predicate Information (identified by operation id): --------------------------------------------------- 1 - access("CH_CELLS"."UA_CH_TREATMENTCODE"="TRT_CELLS"."UA_TR_TREATMENTCODE") 4 - access("T"."TREATMENTCODE"="ITEM_1") 11 - access("CH"."TREATMENTCODE"="DL"."TREATMENTCODE") 13 - filter("CH"."CONTACTDATETIME">SYSDATE@!-5) The outline shows PLACE_DISTINCT(@"SEL$3" "DL"@"SEL$3") indicating that the QB3 is the one that got the transformation. Outline Data ------------- /*+ BEGIN_OUTLINE_DATA IGNORE_OPTIM_EMBEDDED_HINTS OPTIMIZER_FEATURES_ENABLE('11.2.0.3') DB_VERSION('11.2.0.3') ALL_ROWS OUTLINE_LEAF(@"SEL$2") OUTLINE_LEAF(@"SEL$F6AECEDE") OUTLINE_LEAF(@"SEL$AF418D5F") PLACE_DISTINCT(@"SEL$3" "DL"@"SEL$3") OUTLINE_LEAF(@"SEL$1") OUTLINE(@"SEL$48BAF62C") OUTLINE(@"SEL$3") NO_ACCESS(@"SEL$1" "TRT_CELLS"@"SEL$1") NO_ACCESS(@"SEL$1" "CH_CELLS"@"SEL$1") LEADING(@"SEL$1" "TRT_CELLS"@"SEL$1" "CH_CELLS"@"SEL$1") USE_HASH(@"SEL$1" "CH_CELLS"@"SEL$1") FULL(@"SEL$2" "CH"@"SEL$2") FULL(@"SEL$2" "DL"@"SEL$2") LEADING(@"SEL$2" "CH"@"SEL$2" "DL"@"SEL$2") USE_HASH(@"SEL$2" "DL"@"SEL$2") USE_HASH_AGGREGATION(@"SEL$2") NO_ACCESS(@"SEL$AF418D5F" "VW_DTP_48BAF62C"@"SEL$48BAF62C") FULL(@"SEL$AF418D5F" "T"@"SEL$3") LEADING(@"SEL$AF418D5F" "VW_DTP_48BAF62C"@"SEL$48BAF62C" "T"@"SEL$3") USE_HASH(@"SEL$AF418D5F" "T"@"SEL$3") USE_HASH_AGGREGATION(@"SEL$AF418D5F") FULL(@"SEL$F6AECEDE" "DL"@"SEL$3") USE_HASH_AGGREGATION(@"SEL$F6AECEDE") END_OUTLINE_DATA */ The 10053 shows there is a comparative of cost with and without the transformation. This means the transformation belongs to Cost-Based Query Transformations (CBQT). In SEL$3 the optimization of the query block without the transformation is 6659.73 and with the transformation is 4408.41 so the transformation is kept. GBP/DP: Checking validity of GBP/DP for query block SEL$3 (#3) DP: Checking validity of distinct placement for query block SEL$3 (#3) DP: Using search type: linear DP: Considering distinct placement on query block SEL$3 (#3) DP: Starting iteration 1, state space = (5) : (0) DP: Original query DP: Costing query block. DP: Updated best state, Cost = 6659.73 DP: Starting iteration 2, state space = (5) : (1) DP: Using DP transformation in this iteration. DP: Transformed query DP: Costing query block. DP: Updated best state, Cost = 4408.41 DP: Doing DP on the original QB. DP: Doing DP on the preserved QB. In SEL$2 the cost without the transformation is less than with it so it is not kept. GBP/DP: Checking validity of GBP/DP for query block SEL$2 (#2) DP: Checking validity of distinct placement for query block SEL$2 (#2) DP: Using search type: linear DP: Considering distinct placement on query block SEL$2 (#2) DP: Starting iteration 1, state space = (3) : (0) DP: Original query DP: Costing query block. DP: Updated best state, Cost = 267936.93 DP: Starting iteration 2, state space = (3) : (1) DP: Using DP transformation in this iteration. DP: Transformed query DP: Costing query block. DP: Not update best state, Cost = 267951.66 To the same query an INSERT INTO is added and the result is a very different execution plan. INSERT INTO cc (ua_tr_rundatetime, ua_ch_treatmentcode, ua_tr_treatmentcode, ua_ch_cellid, ua_tr_cellid)SELECT ua_tr_rundatetime, ua_ch_treatmentcode, ua_tr_treatmentcode, ua_ch_cellid, ua_tr_cellidFROM (SELECT DISTINCT CH.treatmentcode AS UA_CH_TREATMENTCODE, CH.cellid AS UA_CH_CELLID FROM CH, DL WHERE CH.contactdatetime > SYSDATE - 5 AND CH.treatmentcode = DL.treatmentcode) CH_CELLS, (SELECT DISTINCT T.treatmentcode AS UA_TR_TREATMENTCODE, T.cellid AS UA_TR_CELLID, T.rundatetime AS UA_TR_RUNDATETIME FROM T, DL WHERE T.treatmentcode = DL.treatmentcode) TRT_CELLSWHERE CH_CELLS.ua_ch_treatmentcode(+) = TRT_CELLS.ua_tr_treatmentcode;----------------------------------------------------------| Id | Operation | Name | Cost (%CPU)----------------------------------------------------------| 0 | INSERT STATEMENT | | 274K(100)| 1 | LOAD TABLE CONVENTIONAL | | |* 2 | HASH JOIN OUTER | | 274K (1)| 3 | VIEW | | 6660 (1)| 4 | SORT UNIQUE | | 6660 (1)|* 5 | HASH JOIN | | 6659 (1)| 6 | TABLE ACCESS FULL | DL | 1644 (1)| 7 | TABLE ACCESS FULL | T | 2744 (1)| 8 | VIEW | | 267K (1)| 9 | SORT UNIQUE | | 267K (1)|* 10 | HASH JOIN | | 267K (1)| 11 | PARTITION RANGE ITERATOR| | 266K (1)|* 12 | TABLE ACCESS FULL | CH | 266K (1)| 13 | TABLE ACCESS FULL | DL | 1644 (1)----------------------------------------------------------Query Block Name / Object Alias (identified by operation id):------------------------------------------------------------- 1 - SEL$1 3 - SEL$3 / TRT_CELLS@SEL$1 4 - SEL$3 6 - SEL$3 / DL@SEL$3 7 - SEL$3 / T@SEL$3 8 - SEL$2 / CH_CELLS@SEL$1 9 - SEL$2 12 - SEL$2 / CH@SEL$2 13 - SEL$2 / DL@SEL$2Predicate Information (identified by operation id):--------------------------------------------------- 2 - access("CH_CELLS"."UA_CH_TREATMENTCODE"="TRT_CELLS"."UA_TR_TREATMENTCODE") 5 - access("T"."TREATMENTCODE"="DL"."TREATMENTCODE") 10 - access("CH"."TREATMENTCODE"="DL"."TREATMENTCODE") 12 - filter("CH"."CONTACTDATETIME">SYSDATE@!-5)Outline Data------------- /*+ BEGIN_OUTLINE_DATA IGNORE_OPTIM_EMBEDDED_HINTS OPTIMIZER_FEATURES_ENABLE('11.2.0.3') DB_VERSION('11.2.0.3') ALL_ROWS OUTLINE_LEAF(@"SEL$2") OUTLINE_LEAF(@"SEL$3") OUTLINE_LEAF(@"SEL$1") OUTLINE_LEAF(@"INS$1") FULL(@"INS$1" "CC"@"INS$1") NO_ACCESS(@"SEL$1" "TRT_CELLS"@"SEL$1") NO_ACCESS(@"SEL$1" "CH_CELLS"@"SEL$1") LEADING(@"SEL$1" "TRT_CELLS"@"SEL$1" "CH_CELLS"@"SEL$1") USE_HASH(@"SEL$1" "CH_CELLS"@"SEL$1") FULL(@"SEL$2" "CH"@"SEL$2") FULL(@"SEL$2" "DL"@"SEL$2") LEADING(@"SEL$2" "CH"@"SEL$2" "DL"@"SEL$2") USE_HASH(@"SEL$2" "DL"@"SEL$2") USE_HASH_AGGREGATION(@"SEL$2") FULL(@"SEL$3" "DL"@"SEL$3") FULL(@"SEL$3" "T"@"SEL$3") LEADING(@"SEL$3" "DL"@"SEL$3" "T"@"SEL$3") USE_HASH(@"SEL$3" "T"@"SEL$3") USE_HASH_AGGREGATION(@"SEL$3") END_OUTLINE_DATA */ There is no DISTINCT Placement view and no hint.The 10053 trace shows a new legend "DP: Bypassed: Not SELECT"implying that this is a transformation that it is possible only for SELECTs. GBP/DP: Checking validity of GBP/DP for query block SEL$3 (#4) DP: Checking validity of distinct placement for query block SEL$3 (#4) DP: Bypassed: Not SELECT. GBP/DP: Checking validity of GBP/DP for query block SEL$2 (#3) DP: Checking validity of distinct placement for query block SEL$2 (#3) DP: Bypassed: Not SELECT. In 12.1 (and hopefully in 11.2.0.4 when released) the restriction on applying CBQT to some DMLs and DDLs (like CTAS) is lifted.This is documented in BugTag Note:10013899.8 Allow CBQT for some DML / DDLAnd interestingly enough, it is possible to have a one-off patch in 11.2.0.3. SQL> select DESCRIPTION,OPTIMIZER_FEATURE_ENABLE,IS_DEFAULT 2 from v$system_fix_control where BUGNO='10013899'; DESCRIPTION ---------------------------------------------------------------- OPTIMIZER_FEATURE_ENABLE IS_DEFAULT ------------------------- ---------- enable some transformations for DDL and DML statements 11.2.0.4 1

Read the article

Web Safe Area (optimal resolution) for web app design?

- by M.A.X

I'm in the process of designing a new web app and I'm wondering for what 'Web Safe Area' should I optimize the app layout and design. By Web Safe Area I mean the actual area available to display the website in the browser (which is influenced by monitor resolution as well as the space taken up by the browser and OS) I did some investigation and thinking on my own but wanted to share this to see what the general opinion is. Here is what I found: Optimal Display Resolution: w3schools web stats seems to be the most referenced source (however they state that these are results from their site and is biased towards tech savvy users) http://www.w3counter.com/globalstats.php (aggregate data from something like 15,000 different sites that use their tracking services) StatCounter Global Stats Display Resolution (Stats are based on aggregate data collected by StatCounter on a sample exceeding 15 billion pageviews per month collected from across the StatCounter network of more than 3 million websites) NetMarketShare Screen Resolutions (marketshare.hitslink.com) (a web analytics consulting firm, they get data from browsers of site visitors to their on-demand network of live stats customers. The data is compiled from approximately 160 million visitors per month) Display Resolution Summary: There is a bit of variation between the above sources but in general as of Jan 2011 looks like 1024x768 is about 20%, while ~85% have a higher resolution of at least 1280x768 (1280x800 is the most common of these with 15-20% of total web, depending on the source; 1280x1024 and 1366x768 follow behind with 9-14% of the share). My guess would be that the higher resolution values will be even more common if we filter on North America, and even higher if we filter on N.American corporate users (unfortunately I couldn't find any free geographically filtered statistics). Another point to note is that the 1024x768 desktop user population is likely lower than the aforementioned 20%, seeing as the iPad (1024x768 native display) is likely propping up those number (the app I'm designing is flash based, Apple mobile devices don't support flash so iPad support isn't a concern). My recommendation would be to optimize around the 1280x768 constraint (*note: 1280x768 is actually a relatively rare resolution, but I think it's a valid constraint range considering that 1366x768 is relatively common and 1280 is the most common horizontal resolution). Browser + OS Constraints: To further add to the constraints we have to subtract the space taken up by the browser (assuming IE, which is the most space consuming) and the OS (assuming WinXP-Win7): Win7 has the biggest taskbar footprint at a height of 40px (XP's and Vista's is 30px) The default IE8 view uses up 25px at the bottom of the screen with the status bar and a further 120px at the top of the screen with the windows title bar and the browser UI (assuming the default 'favorites' toolbar is present, it would instead be 91px without the favorites toolbar). Assuming no scrollbar, we also loose a total of 4px horizontally for the window outline. This means that we are left with 583px of vertical space and 1276px of horizontal. In other words, a Web Safe Area of 1276 x 583 Is this a correct line of thinking? I'm really surprised that I couldn't find this type of investigation anywhere on the web. Lots of websites talk about designing for 1024x768, but that's only half the equation! There is no mention of browser/OS influences on the actual area you have to display the site/app. Any help on this would be greatly appreciated! Thanks. EDIT Another caveat to my line of thinking above is that different browsers actually take up different amounts of pixels based on the OS they're running on. For example, under WinXP IE8 takes up 142px on top of the screen (instead the aforementioned 120px for Win7) because the file menu shows up by default on XP while in Win7 the file menu is hidden by default. So it looks like on WinXP + IE8 the Web Safe Area would be a mere 572px (768px-142-30-24=572)

Read the article

Fast Data - Big Data's achilles heel

- by thegreeneman

At OOW 2013 in Mark Hurd and Thomas Kurian's keynote, they discussed Oracle's Fast Data software solution stack and discussed a number of customers deploying Oracle's Big Data / Fast Data solutions and in particular Oracle's NoSQL Database. Since that time, there have been a large number of request seeking clarification on how the Fast Data software stack works together to deliver on the promise of real-time Big Data solutions. Fast Data is a software solution stack that deals with one aspect of Big Data, high velocity. The software in the Fast Data solution stack involves 3 key pieces and their integration: Oracle Event Processing, Oracle Coherence, Oracle NoSQL Database. All three of these technologies address a high throughput, low latency data management requirement. Oracle Event Processing enables continuous query to filter the Big Data fire hose, enable intelligent chained events to real-time service invocation and augments the data stream to provide Big Data enrichment. Extended SQL syntax allows the definition of sliding windows of time to allow SQL statements to look for triggers on events like breach of weighted moving average on a real-time data stream. Oracle Coherence is a distributed, grid caching solution which is used to provide very low latency access to cached data when the data is too big to fit into a single process, so it is spread around in a grid architecture to provide memory latency speed access. It also has some special capabilities to deploy remote behavioral execution for "near data" processing. The Oracle NoSQL Database is designed to ingest simple key-value data at a controlled throughput rate while providing data redundancy in a cluster to facilitate highly concurrent low latency reads. For example, when large sensor networks are generating data that need to be captured while analysts are simultaneously extracting the data using range based queries for upstream analytics. Another example might be storing cookies from user web sessions for ultra low latency user profile management, also leveraging that data using holistic MapReduce operations with your Hadoop cluster to do segmented site analysis. Understand how NoSQL plays a critical role in Big Data capture and enrichment while simultaneously providing a low latency and scalable data management infrastructure thru clustered, always on, parallel processing in a shared nothing architecture. Learn how easily a NoSQL cluster can be deployed to provide essential services in industry specific Fast Data solutions. See these technologies work together in a demonstration highlighting the salient features of these Fast Data enabling technologies in a location based personalization service. The question then becomes how do these things work together to deliver an end to end Fast Data solution. The answer is that while different applications will exhibit unique requirements that may drive the need for one or the other of these technologies, often when it comes to Big Data you may need to use them together. You may have the need for the memory latencies of the Coherence cache, but just have too much data to cache, so you use a combination of Coherence and Oracle NoSQL to handle extreme speed cache overflow and retrieval. Here is a great reference to how these two technologies are integrated and work together. Coherence & Oracle NoSQL Database. On the stream processing side, it is similar as with the Coherence case. As your sliding windows get larger, holding all the data in the stream can become difficult and out of band data may need to be offloaded into persistent storage. OEP needs an extreme speed database like Oracle NoSQL Database to help it continue to perform for the real time loop while dealing with persistent spill in the data stream. Here is a great resource to learn more about how OEP and Oracle NoSQL Database are integrated and work together. OEP & Oracle NoSQL Database.

Read the article

Cream of the Crop

- by KemButller

JD Edwards has been working hard to ensure that you shouldn't have to work so hard! Yet there are still JD Edwards customers that may not be up to speed on all the new and or improved tools and utilities we have delivered, all designed to make your life easier. So today, I want to share what I consider to be the cream of the crop….those items that every customer should know about and leverage to make ERP life just a little bit (or A LOT) easier! These are my top picks, the cream of a very good crop! Explore and enjoy, and gain some of your time back to do with as you please. · www.runjde.com It’s where to go when you need to know! The Resource Kits available on www.runjde.com provide comprehensive Resource Kits (guides) by user type. The guides provide brief descriptions of the wide array of resources that are available to JD Edwards’s eco system and links to each of those resources. · My Oracle Support (MOS) Information Centers This link will take you to an index that is designed to provide you with simple and quick navigation to the available EnterpriseOne Information Centers. This index provides links to: · EnterpriseOne Application specific Information Centers · EnterpriseOne Tools and Technology Information Centers · EnterpriseOne Performance Information Center · EnterpriseOne 9.1 and 9.0 Information Centers Information Centers give Oracle the ability to aggregate content for a given focus area and present this content in categories for easy browsing by our customers. Information Centers offer a variety of focused dynamic content organized around one or more of the following tasks. · Overview · Use · Troubleshooting · Patching and Maintenance · Install and Configure · Upgrade · Optimize Performance · Security · Certify JD Edwards Newsletters Be in the know by reading the Global Customer Support Product Newsletters. They are PACKED with news and information covering a wide range of topics and news. It is a must read if you want to know what’s happening in the JD Edwards universe! Read the latest EntepriseOne newsletter Read the latest World newsletter Learn How to receive notification when a new newsletter edition is published Oracle Learning Library – (OLL) Oracle Learn Library is the place to go for easy access to JD Edwards Application and Tools training. For a comprehensive view of the training available for a specific product/functional area, explore the Knowledge Paths For Net Change (new feature) training, explore the TOI sessions (TOI stands for Transfer Of Information). Tip: Be sure to experiment with the search filters! · www.upgradejde.com The site designed to help customers and partners with the process of upgrading JD Edwards. The site is a wealth of information, tools and resources designed to assist in the evaluation, planning and execution steps required when upgrading. Of note is the wildly successful upgrade strategy known as “The Art of the Possible” wherein JD Edwards and many of our partners hold free workshops to teach customers how to conduct upgrades in 100 days or less. Equally important is the fact that on www.upgradejde.com, customers can gain visibility into planned enhancements using the Product and Technology Feature Catalogs. The catalogs are great for creating customer specific reports about the net change between older releases and current or planned releases. Examples of other key resources on www.upgradejde.com are the product data base changes between releases, extensibility guides, (formerly known as programmer’s guides), whitepapers, ROI calculators and much more!

Search Results

Search found 9015 results on 361 pages for 'wireless range'.

Page 313/361 | < Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320 | Next Page >

- by Mark

- by Kyle Loman

- by Tarun Arora

- by Pinal Dave

- by user769227

- by JuergenKress

- by speakjava

- by Alois Kraus

- by Herve Roggero

- by Tony Davis

- by Bob Rhubart

- by Tim Murphy

- by HCM-Oracle

- by Michael Snow

- by Bob Zurek

- by arungupta

- by Voyagerfan5761

- by Mike Femenella

- by user287529

- by rdatson-Oracle

- by amacias

- by M.A.X

- by thegreeneman

- by KemButller

< Previous Page | 309 310 311 312 313 314 315 316 317 318 319 320 | Next Page >