image segmentation - Page 317

OpenCV compare two images and get different pixels

- by Richard Knop

For some reason the code bellow is not working. I have two 640*480 images which are very similar but not the same (at least few hundred/thousand pixels should be different). This is how I am comparing them and counting different pixels: unsigned char* row; unsigned char* row2; int count = 0; // this happens in a loop // fIplImageHeader is current image // lastFIplImageHeader is image from previous iteration if ( NULL != lastFIplImageHeader->imageData ) { for( int y = 0; y < fIplImageHeader->height; y++ ) { row = &CV_IMAGE_ELEM( fIplImageHeader, unsigned char, y, 0 ); row2 = &CV_IMAGE_ELEM( lastFIplImageHeader, unsigned char, y, 0 ); for( int x = 0; x < fIplImageHeader->width*fIplImageHeader->nChannels; x += fIplImageHeader->nChannels ) { if (row[x] == row2[x]) // the pixel in the first channel (usually G) { count++; } if (row[x+1] == row2[x+1]) // ... second channel (usually B) { count++; } if (row[x+2] == row2[x+2]) // ... third channel (usually R) { count++; } } } } Now at the end I get number 3626 which would seem alright. But, I tried opening one of the images in MS Paint and drawing thick red lines all over it which should increase the number of different pixels substantially. I got the same number again: 3626. Obviously I am doing something wrong here. I am comparing these images in a loop. This line is before the loop: IplImage* lastFIplImageHeader = cvCreateImageHeader(cvSize(640, 480), 8, 3); Then inside the loop I load images like this: IplImage* fIplImageHeader = cvLoadImage( filePath.c_str() ); // here I compare the pixels (the first code snippet) lastFIplImageHeader->imageData = fIplImageHeader->imageData; So lastFIplImageHeader is storing the image from the previous iteration and fIplImageHeader is storing the current image.

Read the article

HTML5: Rendering absolute images using canvas

- by Mark

I am experimenting with canvas as part of my HTML5 introduction. This constitutes as assignment work, but I am not asking for any help on the actual coursework at all. I am trying to write a rendering engine, but having no luck because once the image is drawn on canvas it looks very distorted, and not at the right dimensions of the image itself. I have made a animation engine that loads images into an array, and then iterates through them at a certain speed. This is not the problem, and I assume is not causing the issue as this was happening when I drawn an image to the canvas. I think this is natural behaviour for images to be scaled/skewed when the window is resized, so I conquered that by simply redrawing the whole thing once the window is resized. The images I am using are isometric, and drawn at a pixel level. Would this cause the distortion? It seems setting the dimensions on the drawImage() function are not working are all. I am using JavaScript for the manipulation and rendering of the canvas. I would normally try and work it out myself, but I do not have any time to ponder why because I have no idea why it is even scaling/skewing the image once it is drawn on the canvas. I cannot share the code for obvious reasons. I should also mention, the canvas's dimension is the total width of the viewport, as I am developing a game. My question is: Has anyone encountered this and how would I correct it? Thanks for your help.

Read the article

Regex to GENERATE thumbnails!?!?! (but that's crazy!)

- by CryptoMonkey

Hello everyone! So here is my situation, and the solution that I've come up with to solve the problem. I have created an application that includes TinyMCE to allow users to create HTML content for publishing. The user can include images in their markup, and drag/resize those images effecting the final Width/Height attributes in the IMG tag. This is all great, the users can include images and resize/relocate them to their desired appearance. But one big problem is that I am now sending a (possibly) much larger image to the client, only to have the browser resize the image into the requested Width/Height attributes. All that bandwidth and lost load time.... So my solution is to pre-process my users markup content, scanning all of the IMG tags and parsing out the Height/Width/Src attributes. Then set each img's SRC tag to a phpThumb request with the parsed Height/Width passed into the thumbnails URL. This will create my reduced size image (optimising bandwidth at the expense of CPU and caching). What do you think about this solution? I've seen other posts where people were using mod_rewrite to do something similar, but I want to effect the content on the page service and not manipulate the image requests as they're being received. .... Any thoughts about this design? I need some help with the fine details as my regex skills need some work, but I'm very short on time and promise to pay my technical knowledge debt soon. To make the regex's easier, I can be sure of some things. Only img tags that need this processing will have an existing width="" height="" attributes (with the double quotes, and lower cased text, but I suppose matching the text case insensitive would be better if TinyMCE changes) So a regex to match only the necessary Img tags, and maybe another three regex's to extract the src, the width, and the height? Thanks everyone.

Read the article

CSS - How to prevent the browser from showing scrollbars when a div goes outside of the window?

- by xarfai

I have a centered wrapper with following CSS: div.wrapper { width: 1170px; padding-left:30px; margin-top: 80px; margin-bottom:20px; margin-left: auto; margin-right: auto; position:relative; background-color:black; } inside i have a div with following css: position:absolute; top:-26px; left:517px; height:63px; z-index:3; inside of this div is an image which has 759px width, that makes the wrapper grow larger and makes the browser show a v-scrollbar on lower display resolutions. what i want is to make the image go outside the wrapper but prevent the browser from showing the scrollbar, so that the right side of the image is only shown if your browser window is large enough and the wrapper keeps its 1200px width. i can't make it a background image because it goes over some of the other content. something that is compatible with = IE7 would be nice

Read the article

how to disable an onclick event?

- by user1819709

<form id="QandA" action="<?php echo htmlentities($action); ?>" method="post"> <table id="question"> <tr> <td colspan="2"> <a onclick="return plusbutton();"> <img src="Images/plussign.jpg" width="30" height="30" alt="Look Up Previous Question" class="plusimage" id="mainPlusbutton" name="plusbuttonrow"/> </a> <span id="plussignmsg">(Click Plus Sign to look up Previous Questions)</span> </td> </tr> </table> </form> In the code above I am able to replace an image with another image when the if statement is met. But my problem is that when the image is replaced, it does not disable the on click event. My question is that when the image is replaced, how do I disable the onclick event onclick="return plusbutton();?

Read the article

Clickable label not working in IE 8

- by coffeeaddict

I've got the following list item: <li> <input value="someRadioButton" name="ctl00$mainContent$group" type="radio" id="ctl00_mainContent_somelRadioButton" onclick="showSomeInfo()" /> <label for="ctl00_mainContent_someRadioButton"><img class="extraPadding-Right-10" src="https://xxy.com/some_mark_37x23.gif" /></label> </li> So what shows up is a radio button and an image next to it. When I am in FireFox, Chrome, and Safari clicking on that image fires the showSomeInfo() that's specified in the radio's onclick. I'm not sure why I guess because it's wrapped in a label and that label is relating to that radio button.... But anyway that's not my problem. I like that when you click the image, that javascript method showSomeInfo() is called. But the problem is that it works in all browsers except IE 8. If I open this page in IE 8, clicking on the image does nothing and I'm not sure why. I'm baffled at this one.

Read the article

DynamicContent.html: Write a JavaScript in an HTML document that can change the content of an HTML e

- by A sw A

ShowHide.html: Write a JavaScript in an HTML document that displays an image and allows the user to toggle the image between appearing and not appearing in the document. Place your image in a (division) tag that has a style attribute. “style.visibility” can take two values: “visible” and “hidden”. The document has a button called “Toggle Image”, which calls the toggle function upon the event “onclick”. DynamicColors.html: Write a JavaScript in an HTML document that changes the background and foreground colors of the body of a document according to the user input. The document has two input texts: background color and foreground color. The colors change when the event “onchange” occurs as you type in the text input and the event handler is called. Your event handler takes two parameters: “where”, and “newColor”. To change the document color and background color you need to change the elements document.body.style.color and document.body.style.backgroundColor. Available colors are: black, silver, gray, white, maroon, red, purple, fuchsia, green, lime, olive, yellow, navy, blue, teal, and aqua. DynamicContent.html: Write a JavaScript in an HTML document that can change the content of an HTML element (a help box). The content of an element is accessed through its “value” property. The content of a help box can change depending on the placement of the mouse cursor. When the cursor is placed over a particular input field (“onmouseover” event), the help box can display advice on how the field is to be filled. When the cursor is moved away from the input field (“onmouseout” event), the help box content changes to simply indicate that assistance is available. Your messages are stored in an array of strings.

Read the article

Help with 'simple' jQuery question

- by user318573

I am trying to get a simple effect working in jQuery, and only have a few hours of experience with it, so have a lot to learn. I managed to get this code working: <script type="text/javascript" > $(document).ready(function() { lastBlock = $("#a1"); maxWidth = 415; minWidth = 75; $("ul li a").hover(function() { $(lastBlock).animate({ width: minWidth + "px" }, { queue: false, duration: 600 }); $(this).animate({ width: maxWidth + "px" }, { queue: false, duration: 600 }); lastBlock = this; }); }); </script> Which gives me exactly what I want, a 6 pane horizontal accordion effect. Each pane however has a 75x75 image on the upper left, which is always visible no matter which pane is active (and it is this image that when hovered over caused the pane to open) - what I want to do is for the image on the selected 'pane', I want to drop the top margin down 10px, and then put it back to 0px when a new one is selected, i.e. so the selected panes image is always 10px lower than the other 5 images. I suspect this should be easy, but not quite grasping the syntax yet. Thanks.

Read the article

How to gracefully handle YouTube thumbnail broken images when videos are taken down?

- by mrjf

Our site contains some lists of YouTube videos with their thumbnails linked to the movies themselves. We fetch the thumbnail URLs from the YouTube API, and hotlink to them in situ on YouTube's servers. So our image tags look like: <img src="http://i.ytimg.com/vi/o6CHqSN7O-o/2.jpg" alt="" width="133" height="78" /> The problem is that sometimes a video gets removed -- and so does the thumbnail. We don't know when that might happen, and our thumbnails just turn into broken images. How can we handle this? There are a number of solutions: Download thumbnails and store them locally -- movie won't work, but that's ok, it will explain it was removed, and we avoid the broken image Check periodically with the API to see if the image thumbnail has changed -- if it no longer exists, substitute our own "movie removed" thumbnail. This is pretty heavy on the API calling! Use JavaScript to replace broken images (don't like this one much) Our ideal solution would be to point the img src to a location on YouTube that would display a friendly "move removed" image when a movie goes down. However, that doesn't seem to exist. Anyone else dealt with this? Thanks!

Read the article

jQuery removeClass(), how it works

- by centro

I have images on my page. User can add more images onto the page by clicking a button. New images are added asynchronously. Initially, each image on page use a special class to be used when the image is loaded. After the image is loaded, that class is removed. Each image being loaded has the class imageLoading: <img class="imageLoading" scr="someimage.png"> After those images are loaded, I remove that class (simplified code without details): $('img.imageLoading') .each(function(){ $(this) .load(function(){ $(this) .removeClass('imageloading'); });}); Visually, I see that style is removed. But when I run the query again: $('img.imageLoading') I see via debugging that all images, not just loading ones, are returned, i.e. it works like I didn't remove the class for the images that were already loaded. I had a look into the page source, and I saw that actually in HTML the class was not removed, though removeClass() was called. Is that behavior by design that all visual changes are applied but the class attribute is not removed in HTML code? If so, how it can be workarounded in this case. Or, probably, I missed something.

Read the article

What is an efficient way to serve images (PHP)?

- by Scarface

Hey guys currently I am thinking of serving images using an image handler script. I have two sources of images. One is from my web images folder where images that are used to construct my site interface are served. The other is in each users images folder where they can store their own images. I was thinking of giving each user image a unique id and then searching that id with the image handler script and serving the image, and changing the file name. The problem is that my site images folder does not have any information in the database and thus has no ids, should I just serve directly? Also this way of serving user images does not seem like the most efficient. If anyone has any suggestions I would really appreciate it. $sql="SELECT username,file_name FROM images WHERE id=?"; $stmt=$conn->prepare($sql); $result=$stmt->execute(array($ID)); while($row = $stmt->fetch(PDO::FETCH_ASSOC)){ $image_name = $row['file_name']; $username = $row['username']; } $path="$username/images/$image_name"; header("Expires: -1"); header("Cache-Control: no-store, no-cache, must-revalidate"); header("Cache-Control: post-check=0, pre-check=0", false); readfile($path);

Read the article

CSS challenge: Two background images, centered column with fixed with, min-height 100%

- by laurent

In a nutshell I need a CSS solution for the following requirements: Layout: One centered column with fixed width and a minimum height of 100% Two vertically repeated background images behind the centered column, one aligned to the left, one aligned to the right Cross browser compatibility A little more details Today a new requirement for my current web site project came up: A background image with gradients on the left and right side. The challenge is now to specify two different background images while keeping the rest of the layout spec. Unfortunately the (simple) layout somehow doesn't go with the two backgrounds. My layout is basically one centered column with fixed width: #main_container { margin: 0 auto; min-height: 100%; width: 800px; } Furthermore it's necessary to stretch the column to a minimum height of 100%, since there are quite some pages with only little content. The following CSS styles take care of that: html { height: 100%; } body { margin: 0; height: 100%; padding: 0; } So far so good - until the two background image issue arrived... I tried the following solutions Two absolute positioned divs behind the main container One image defined with the body, one with the html CSS class One image defined with the body, the other one with a large div begind the main container With either one of them, the dynamic height solution was ruined. Either the main container didn't stretch to 100% when it was too small, or the background remained at 100% when the content was actually longer

Read the article

NSUTF8StringEncoding gives me this %0A%20%20%20%20%22http://example.com/example.jpg%22%0A

- by user1530141

So I'm trying to load pictures from twitter. If i just use the URL in the json results without encoding, in the dataWithContentsOfURL, I get nil URL argument. If I encode it, I get %0A%20%20%20%20%22http://example.com/example.jpg%22%0A. I know I can use rangeOfString: or stringByReplacingOccurrencesOfString: but can I be sure that it will always be the same, is there another way to handle this, and why is this happening to my twitter response and not my instagram response? i have also tried stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet] and it does nothing. this is the url directly from the json... 2013-11-08 22:09:31:812 JaVu[1839:1547] -[SingleEventTableViewController tableView:cellForRowAtIndexPath:] [Line 406] ( "http://pbs.twimg.com/media/BYWHiq1IYAAwSCR.jpg" ) here is my code if ([post valueForKeyPath:@"entities.media.media_url"]) { NSString *twitterString = [[NSString stringWithFormat:@"%@", [post valueForKeyPath:@"entities.media.media_url"]]stringByTrimmingCharactersInSet:[NSCharacterSet whitespaceAndNewlineCharacterSet]]; twitterString = [twitterString stringByAddingPercentEscapesUsingEncoding:NSUTF8StringEncoding]; NSLog(@"%@", twitterString); if (twitterString != nil){ NSURL *twitterPhotoUrl = [NSURL URLWithString:twitterString]; NSLog(@"%@", twitterPhotoUrl); dispatch_queue_t queue = kBgQueue; dispatch_async(queue, ^{ NSError *error; NSData* data = [NSData dataWithContentsOfURL:twitterPhotoUrl options:NSDataReadingUncached error:&error]; UIImage *image = [UIImage imageWithData:data]; dispatch_sync(dispatch_get_main_queue(), ^{ [streamPhotoArray replaceObjectAtIndex:indexPath.row withObject:image]; cell.instagramPhoto.image = image; }); }); } }

Read the article

Solaris 10 branded zone VM Templates for Solaris 11 on OTN

- by jsavit

Early this year I wrote the article Ours Goes To 11 which describes the ability to import Solaris 10 systems into a "Solaris 10 branded zone" under Oracle Solaris 11. I did this using Solaris 11 Express, and the capability remains in Solaris 11 with only slight changes. This important tool lets you painlessly inhaling a Solaris Container from Solaris 10 or entire Solaris 10 systems ("the global zone") into virtualized environments on a Solaris 11 OS. Just recently, Oracle provided Oracle VM Templates for Oracle Solaris 10 Zones to let you create Solaris 10 branded zones for Solaris 11 even if you don't currently have access to install media or a running Solaris 10 system. To use this, just download the Oracle VM Template for Oracle Solaris Zone 10 from OTN at http://www.oracle.com/technetwork/server-storage/solaris11/downloads/virtual-machines-1355605.html. This page contains images of Oracle Solaris 10 8/11 (the recent update to Solaris 10) in SPARC and x86 formats suitable for creating branded zones. The same page also has a VirtualBox image you can download for a complete Solaris 10 install in a guest virtual machine you can run on any host OS that supports VirtualBox. Both sets of downloads provide a quick - and extremely easy - way to set up a virtual Solaris 10 environment. In the case of the Oracle VM Templates, they illustrate several advanced features of Solaris 11. To start, just go to the above link, download the template for the hardware platform (SPARC or x86) you want, and download the README file also linked from that page. Install prerequisites The README file tells you to install the prerequisite Solaris 11 package that implements the Solaris 10 brand. Then you can install instances of zones with that brand. # pkg install pkg:/system/zones/brand/brand-solaris10 Packages to install: 1 Create boot environment: No Create backup boot environment: Yes DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 44/44 0.4/0.4 PHASE ACTIONS Install Phase 74/74 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 That took only a few minutes, and didn't require a reboot. Install the Solaris 10 zone Now it's time to run the downloaded template file. First make it executable via the chmod command, of course. I found that (unlike stated in the README) there was no need to rename the downloaded file to remove the .bin. When you run it you provide several parameters to describe the zone configuration: -a IP address - the IP address and optional netmask for the zone. This is the only mandatory parameter. -z zonename - the name of the zone you would like to create. -i interface - the package will create an exclusive-IP zone using a virtual NIC (vnic) based on this physical interface. In my case, I have a NIC called rge0. -p PATH - specifies the path in which you want the zoneroot to be placed. In my case, I have a ZFS dataset mounted at /zones, and this will create a zoneroot at /zones/s10u10. Kicking it off, you will see a copyright message, and then messages showing progress building the zone, which only takes a few minutes. # ./solaris-10u10-x86.bin -p /zones -a 192.168.1.100 -i rge0 -z s10u10 ... ... Checking disk-space for extraction Ok Extracting in /export/home/CDimages/s10zone/bootimage.ihaqvh ... 100% [===============================] Checking data integrity Ok Checking platform compatibility The host and the image do not have the same Solaris release: host Solaris release: 5.11 image Solaris release: 5.10 Will create a Solaris 10 branded zone. Warning: could not find a defaultrouter Zone won't have any defaultrouter configured IMAGE: ./solaris-10u10-x86.bin ZONE: s10u10 ZONEPATH: /zones/s10u10 INTERFACE: rge0 VNIC: vnicZBI13379 MAC ADDR: 2:8:20:5c:1a:cc IP ADDR: 192.168.1.100 NETMASK: 255.255.255.0 DEFROUTER: NONE TIMEZONE: US/Arizona Checking disk-space for installation Ok Installing in /zones/s10u10 ... 100% [===============================] Using a static exclusive-IP Attaching s10u10 Booting s10u10 Waiting for boot to complete booting... booting... booting... Zone s10u10 booted The zone's root password has been set using the root password of the local host. You can change the zone's root password to further harden the security of the zone: being root, log into the zone from the local host with the command 'zlogin s10u10'. Once logged in, change the root password with the command 'passwd'. The nifty part in my opinion (besides being so easy), is that the zone was created as an exclusive-IP zone on a virtual NIC. This network configuration lets you enforce traffic isolation from other zones, enforce network Quality of Service, and even let the zone set its own characteristics like IP address and packet size. Independence of the zone's network characteristics from the global zone is one of the enhancements in Solaris 10 that make it easier to consolidate zones while preserving their autonomy, yet provide control in a consolidated environment. Let's see what the virtual network environment looks like by issuing commands from the Solaris 11 global zone. First I'll use Old School ifconfig, and then I'll use the new ipadm and dladm commands. # ifconfig -a4 lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 rge0: flags=1004943<UP,BROADCAST,RUNNING,PROMISC,MULTICAST,DHCP,IPv4> mtu 1500 index 2 inet 192.168.1.3 netmask ffffff00 broadcast 192.168.1.255 ether 0:14:d1:18:ac:bc vboxnet0: flags=201000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4,CoS> mtu 1500 index 3 inet 192.168.56.1 netmask ffffff00 broadcast 192.168.56.255 ether 8:0:27:f8:62:1c # dladm show-phys LINK MEDIA STATE SPEED DUPLEX DEVICE yge0 Ethernet unknown 0 unknown yge0 yge1 Ethernet unknown 0 unknown yge1 rge0 Ethernet up 1000 full rge0 vboxnet0 Ethernet up 1000 full vboxnet0 # dladm show-link LINK CLASS MTU STATE OVER yge0 phys 1500 unknown -- yge1 phys 1500 unknown -- rge0 phys 1500 up -- vboxnet0 phys 1500 up -- vnicZBI13379 vnic 1500 up rge0 s10u10/vnicZBI13379 vnic 1500 up rge0 s10u10/net0 vnic 1500 up rge0 # dladm show-vnic LINK OVER SPEED MACADDRESS MACADDRTYPE VID vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/vnicZBI13379 rge0 1000 2:8:20:5c:1a:cc random 0 s10u10/net0 rge0 1000 2:8:20:9d:d0:79 random 0 # ipadm show-addr ADDROBJ TYPE STATE ADDR lo0/v4 static ok 127.0.0.1/8 rge0/_a dhcp ok 192.168.1.3/24 vboxnet0/_a static ok 192.168.56.1/24 lo0/v6 static ok ::1/128 Log into the zone The install step already booted the zone, so lets log into it. Notice how you have to be appropriately privileged to log into a zone. This is my home system so I'm being a bit cavalier, but in a production environment you can give granular control of who can login to which zones. Voila! a Solaris 10 environment under a Solaris 11 kernel. Notice the output from the uname -a and ifconfig commands, and output from a ping to a nearby host. $ zlogin s10u10 zlogin: You lack sufficient privilege to run this command (all privs required) savit@home:~$ sudo zlogin s10u10 Password: [Connected to zone 's10u10' pts/5] Oracle Corporation SunOS 5.10 Generic Patch January 2005 # uname -a SunOS s10u10 5.10 Generic_Virtual i86pc i386 i86pc # ifconfig -a4 lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc # bash bash-3.2# ifconfig -a lo0: flags=2001000849 mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 vnicZBI13379: flags=1000843 mtu 1500 index 2 inet 192.168.1.100 netmask ffffff00 broadcast 192.168.1.255 ether 2:8:20:5c:1a:cc bash-3.2# ping 192.168.1.2 192.168.1.2 is alive For fun, I configured Apache (setting its configuration file in /etc/apache2) and brought it up. Easy - took just a few minutes. bash-3.2# svcs apache2 STATE STIME FMRI disabled 12:38:46 svc:/network/http:apache2 bash-3.2# svcadm enable apache2 Summary In just a few minutes, I built a functioning virtual Solaris 10 environment under by Solaris 11 system. It was... easy! While I can still do it the manual way (creating and using a system archive), this is a low-effort way to create a Solaris 10 zone on Solaris 11.

Read the article

ASP.NET Controls – CommunityServer Captcha ControlAdapter, a practical case

- by nmgomes

The ControlAdapter is available since .NET framework version 2.0 and his main goal is to adapt and customize a control render in order to achieve a specific behavior or layout. This customization is done without changing the base control. A ControlAdapter is commonly used to custom render for specific platforms like Mobile. In this particular case the ControlAdapter was used to add a specific behavior to a Control. In this post I will use one adapter to add a Captcha to all WeblogPostCommentForm controls within pontonetpt.com CommunityServer instance. The Challenge The ControlAdapter complexity is usually associated with the complexity/structure of is base control. This case is precisely one of those since base control dynamically load his content (controls) thru several ITemplate. Those of you who already played with ITemplate knows that while it is an excellent option for control composition it also brings to the table a big issue: “Controls defined within a template are not available for manipulation until they are instantiated inside another control.” While analyzing the WeblogPostCommentForm control I found that he uses the ITemplate technique to compose it’s layout and unfortunately I also found that the template content vary from theme to theme. This could have been a problem but luckily WeblogPostCommentForm control template content always contains a submit button with a well known ID (at least I can assume that there are a well known set of IDs). Using this submit button as anchor it’s possible to add the Captcha controls in the correct place. Another important finding was that WeblogPostCommentForm control inherits from the WrappedFormBase control which is the base control for all CommunityServer input forms. Knowing this inheritance link the main goal has changed to became the creation of a base ControlAdapter that could be extended and customized to allow adding Captcha to: post comments form contact form user creation form. And, with this mind set, I decided to used the following ControlAdapter base class signature :public abstract class WrappedFormBaseCaptchaAdapter<T> : ControlAdapter where T : WrappedFormBase { }Great, but there are still many to do … Captcha The Captcha will be assembled with: A dynamically generated image with a set of random numbers A TextBox control where the image number will be inserted A Validator control to validate whether TextBox numbers match the image numbers This is a common Captcha implementation, is not rocket science and don’t bring any additional problem. The main problem, as told before, is to find the correct anchor control to ensure a correct Captcha control injection. The anchor control can vary by: target control theme Implementation To support this dynamic scenario I choose to use the following implementation:private List<string> _validAnchorIds = null; protected virtual List<string> ValidAnchorIds { get { if (this._validAnchorIds == null) { this._validAnchorIds = new List<string>(); this._validAnchorIds.Add("btnSubmit"); } return this._validAnchorIds; } } private Control GetAnchorControl(T wrapper) { if (this.ValidAnchorIds == null || this.ValidAnchorIds.Count == 0) { throw new ArgumentException("Cannot be null or empty", "validAnchorNames"); } var q = from anchorId in this.ValidAnchorIds let anchorControl = CSControlUtility.Instance().FindControl(wrapper, anchorId) where anchorControl != null select anchorControl; return q.FirstOrDefault(); } I can now, using the ValidAnchorIds property, configure a set of valid anchor control Ids. The GetAnchorControl method searches for a valid anchor control within the set of valid control Ids. Here, some of you may question why to use a LINQ To Objects expression, but the important here is to notice the usage of CSControlUtility.Instance().FindControl CommunityServer method. I want to build on top of CommunityServer not to reinvent the wheel. Assuming that an anchor control was found, it’s now possible to inject the Captcha at the correct place. This not something new, we do this all the time when creating server controls or adding dynamic controls:protected sealed override void CreateChildControls() { base.CreateChildControls(); if (this.IsCaptchaRequired) { T wrapper = base.Control as T; if (wrapper != null) { Control anchorControl = GetAnchorControl(wrapper); if (anchorControl != null) { Panel phCaptcha = new Panel {CssClass = "CommonFormField", ID = "Captcha"}; int index = anchorControl.Parent.Controls.IndexOf(anchorControl); anchorControl.Parent.Controls.AddAt(index, phCaptcha); CaptchaConfiguration.DefaultProvider.AddCaptchaControls( phCaptcha, GetValidationGroup(wrapper, anchorControl)); } } } } Here you can see a new entity in action: a provider. This is a CaptchaProvider class instance and is only goal is to create the Captcha itself and do everything else is needed to ensure is correct operation.public abstract class CaptchaProvider : ProviderBase { public abstract void AddCaptchaControls(Panel captchaPanel, string validationGroup); } You can create your own specific CaptchaProvider class to use different Captcha strategies including the use of existing Captcha services like ReCaptcha. Once the generic ControlAdapter was created became extremely easy to created a specific one. Here is the specific ControlAdapter for the WeblogPostCommentForm control:public class WeblogPostCommentFormCaptchaAdapter : WrappedFormBaseCaptchaAdapter<WrappedFormBase> { #region Overriden Methods protected override List<string> ValidAnchorIds { get { List<string> validAnchorNames = base.ValidAnchorIds; validAnchorNames.Add("CommentSubmit"); return validAnchorNames; } } protected override string DefaultValidationGroup { get { return "CreateCommentForm"; } } #endregion Overriden Methods } Configuration This is the magic step. Without changing the original pages and keeping the application original assemblies untouched we are going to add a new behavior to the CommunityServer application. To glue everything together you must follow this steps: Add the following configuration to default.browser file:<?xml version='1.0' encoding='utf-8'?> <browsers> <browser refID="Default"> <controlAdapters>  <adapter controlType="CommunityServer.Blogs.Controls.WeblogPostCommentForm" adapterType="NunoGomes.CommunityServer.Components.WeblogPostCommentFormCaptchaAdapter, NunoGomes.CommunityServer" /> </controlAdapters> </browser> </browsers> Add the following configuration to web.config file:<configuration> <configSections>  <section name="communityServer.Captcha" type="NunoGomes.CommunityServer.Captcha.Configuration.CaptchaSection" /> </configSections>  <communityServer.Captcha defaultProvider="simpleCaptcha"> <providers> <add name="simpleCaptcha" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProvider, NunoGomes.CommunityServer" imageUrl="~/captcha.ashx" enabled="true" passPhrase="_YourPassPhrase_" saltValue="_YourSaltValue_" hashAlgorithm="SHA1" passwordIterations="3" keySize="256" initVector="_YourInitVectorWithExactly_16_Bytes_" /> </providers> </communityServer.Captcha> <system.web> <httpHandlers>  <add verb="GET" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </httpHandlers> </system.web> <system.webServer> <handlers accessPolicy="Read, Write, Script, Execute">  <add verb="GET" name="captcha" path="captcha.ashx" type="NunoGomes.CommunityServer.Captcha.Providers.SimpleCaptchaProviderImageHandler, NunoGomes.CommunityServer" /> </handlers> </system.webServer> </configuration> Conclusion Building a ControlAdapter can be complex but the reward is his ability to allows us, thru configuration changes, to modify an application render and/or behavior. You can see this ControlAdapter in action here and here (anonymous required). A complete solution is available in “CommunityServer Extensions” Codeplex project.

Read the article

June 2013 Release of the Ajax Control Toolkit

- by Stephen.Walther

I’m happy to announce the June 2013 release of the Ajax Control Toolkit. For this release, we enhanced the AjaxFileUpload control to support uploading files directly to Windows Azure. We also improved the SlideShow control by adding support for CSS3 animations. You can get the latest release of the Ajax Control Toolkit by visiting the project page at CodePlex (http://AjaxControlToolkit.CodePlex.com). Alternatively, you can execute the following NuGet command from the Visual Studio Library Package Manager window: Uploading Files to Azure The AjaxFileUpload control enables you to efficiently upload large files and display progress while uploading. With this release, we’ve added support for uploading large files directly to Windows Azure Blob Storage (You can continue to upload to your server hard drive if you prefer). Imagine, for example, that you have created an Azure Blob Storage container named pictures. In that case, you can use the following AjaxFileUpload control to upload to the container: <toolkit:ToolkitScriptManager runat="server" /> <toolkit:AjaxFileUpload ID="AjaxFileUpload1" StoreToAzure="true" AzureContainerName="pictures" runat="server" /> Notice that the AjaxFileUpload control is declared with two properties related to Azure. The StoreToAzure property causes the AjaxFileUpload control to upload a file to Azure instead of the local computer. The AzureContainerName property points to the blob container where the file is uploaded. .int3{position:absolute;clip:rect(487px,auto,auto,444px);}SMALL cash advance VERY CHEAP To use the AjaxFileUpload control, you need to modify your web.config file so it contains some additional settings. You need to configure the AjaxFileUpload handler and you need to point your Windows Azure connection string to your Blob Storage account. <configuration> <appSettings>  <add key="AjaxFileUploadAzureConnectionString" value="DefaultEndpointsProtocol=https;AccountName=testact;AccountKey=RvqL89Iw4npvPlAAtpOIPzrinHkhkb6rtRZmD0+ojZupUWuuAVJRyyF/LIVzzkoN38I4LSr8qvvl68sZtA152A=="/> </appSettings> <system.web> <compilation debug="true" targetFramework="4.5" /> <httpRuntime targetFramework="4.5" /> <httpHandlers> <add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </httpHandlers> </system.web> <system.webServer> <validation validateIntegratedModeConfiguration="false" /> <handlers> <add name="AjaxFileUploadHandler" verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/> </handlers> <security> <requestFiltering> <requestLimits maxAllowedContentLength="4294967295"/> </requestFiltering> </security> </system.webServer> </configuration> You supply the connection string for your Azure Blob Storage account with the AjaxFileUploadAzureConnectionString property. If you set the value “UseDevelopmentStorage=true” then the AjaxFileUpload will upload to the simulated Blob Storage on your local machine. After you create the necessary configuration settings, you can use the AjaxFileUpload control to upload files directly to Azure (even very large files). Here’s a screen capture of how the AjaxFileUpload control appears in Google Chrome: After the files are uploaded, you can view the uploaded files in the Windows Azure Portal. You can see that all 5 files were uploaded successfully: New AjaxFileUpload Events In response to user feedback, we added two new events to the AjaxFileUpload control (on both the server and the client): · UploadStart – Raised on the server before any files have been uploaded. · UploadCompleteAll – Raised on the server when all files have been uploaded. · OnClientUploadStart – The name of a function on the client which is called before any files have been uploaded. · OnClientUploadCompleteAll – The name of a function on the client which is called after all files have been uploaded. These new events are most useful when uploading multiple files at a time. The updated AjaxFileUpload sample page demonstrates how to use these events to show the total amount of time required to upload multiple files (see the AjaxFileUpload.aspx file in the Ajax Control Toolkit sample site). SlideShow Animated Slide Transitions With this release of the Ajax Control Toolkit, we also added support for CSS3 animations to the SlideShow control. The animation is used when transitioning from one slide to another. Here’s the complete list of animations: · FadeInFadeOut · ScaleX · ScaleY · ZoomInOut · Rotate · SlideLeft · SlideDown You specify the animation which you want to use by setting the SlideShowAnimationType property. For example, here is how you would use the Rotate animation when displaying a set of slides: <%@ Page Language="C#" AutoEventWireup="true" CodeBehind="ShowSlideShow.aspx.cs" Inherits="TestACTJune2013.ShowSlideShow" %> <%@ Register TagPrefix="toolkit" Namespace="AjaxControlToolkit" Assembly="AjaxControlToolkit" %> <script runat="Server" type="text/C#"> [System.Web.Services.WebMethod] [System.Web.Script.Services.ScriptMethod] public static AjaxControlToolkit.Slide[] GetSlides() { return new AjaxControlToolkit.Slide[] { new AjaxControlToolkit.Slide("slides/Blue hills.jpg", "Blue Hills", "Go Blue"), new AjaxControlToolkit.Slide("slides/Sunset.jpg", "Sunset", "Setting sun"), new AjaxControlToolkit.Slide("slides/Winter.jpg", "Winter", "Wintery..."), new AjaxControlToolkit.Slide("slides/Water lilies.jpg", "Water lillies", "Lillies in the water"), new AjaxControlToolkit.Slide("slides/VerticalPicture.jpg", "Sedona", "Portrait style picture") }; } </script> <!DOCTYPE html> <html > <head runat="server"> <title></title> </head> <body> <form id="form1" runat="server"> <div> <toolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:Image ID="Image1" Height="300" Runat="server" /> <toolkit:SlideShowExtender ID="SlideShowExtender1" TargetControlID="Image1" SlideShowServiceMethod="GetSlides" AutoPlay="true" Loop="true" SlideShowAnimationType="Rotate" runat="server" /> </div> </form> </body> </html> In the code above, the set of slides is exposed by a page method named GetSlides(). The SlideShowAnimationType property is set to the value Rotate. The following animated GIF gives you an idea of the resulting slideshow: If you want to use either the SlideDown or SlideRight animations, then you must supply both an explicit width and height for the Image control which is the target of the SlideShow extender. For example, here is how you would declare an Image and SlideShow control to use a SlideRight animation: <toolkit:ToolkitScriptManager ID="ToolkitScriptManager1" runat="server" /> <asp:Image ID="Image1" Height="300" Width="300" Runat="server" /> <toolkit:SlideShowExtender ID="SlideShowExtender1" TargetControlID="Image1" SlideShowServiceMethod="GetSlides" AutoPlay="true" Loop="true" SlideShowAnimationType="SlideRight" runat="server" /> Notice that the Image control includes both a Height and Width property. Here’s an approximation of this animation using an animated GIF: Summary The Superexpert team worked hard on this release. We hope you like the new improvements to both the AjaxFileUpload and the SlideShow controls. We’d love to hear your feedback in the comments. On to the next sprint!

Read the article

Generating radial indicator images using C#

- by DigiMortal

In one of my projects I needed to draw radial indicators for processes measured in percent. Simple images like the one shown on right. I solved the problem by creating images in C# and saving them on server hard disc so if image is once generated then it is returned from disc next time. I am not master of graphics or geometrics but here is the code I wrote. Drawing radial indicator To get things done quick’n’easy way – later may some of younger developers be the one who may need to changes things – I divided my indicator drawing process to four steps shown below. 1. Fill pie 2. Draw circles 3. Fill inner circle 4. Draw text Drawing image Here is the code to draw indicators. private static void SaveRadialIndicator(int percent, string filePath) { using (Bitmap bitmap = new Bitmap(100, 100)) using (Graphics objGraphics = Graphics.FromImage(bitmap)) { // Initialize graphics objGraphics.Clear(Color.White); objGraphics.SmoothingMode = SmoothingMode.AntiAlias; objGraphics.TextRenderingHint = TextRenderingHint.ClearTypeGridFit; // Fill pie // Degrees are taken clockwise, 0 is parallel with x // For sweep angle we must convert percent to degrees (90/25 = 18/5) float startAngle = -90.0F; float sweepAngle = (18.0F / 5) * percent; Rectangle rectangle = new Rectangle(5, 5, 90, 90); objGraphics.FillPie(Brushes.Orange, rectangle, startAngle, sweepAngle); // Draw circles rectangle = new Rectangle(5, 5, 90, 90); objGraphics.DrawEllipse(Pens.LightGray, rectangle); rectangle = new Rectangle(20, 20, 60, 60); objGraphics.DrawEllipse(Pens.LightGray, rectangle); // Fill inner circle with white rectangle = new Rectangle(21, 21, 58, 58); objGraphics.FillEllipse(Brushes.White, rectangle); // Draw text on image // Use rectangle for text and align text to center of rectangle var font = new Font("Arial", 13, FontStyle.Bold); StringFormat stringFormat = new StringFormat(); stringFormat.Alignment = StringAlignment.Center; stringFormat.LineAlignment = StringAlignment.Center; rectangle = new Rectangle(20, 40, 62, 20); objGraphics.DrawString(percent + "%", font, Brushes.DarkGray, rectangle, stringFormat); // Save indicator to file objGraphics.Flush(); if (File.Exists(filePath)) File.Delete(filePath); bitmap.Save(filePath, ImageFormat.Png); } } Using indicators on web page To show indicators on your web page you can use the following code on page that outputs indicator images: protected void Page_Load(object sender, EventArgs e) { var percentString = Request.QueryString["percent"]; var percent = 0; if(!int.TryParse(percentString, out percent)) return; if(percent < 0 || percent > 100) return; var file = Server.MapPath("~/images/percent/" + percent + ".png"); if(!File.Exists(file)) SaveImage(percent, file); Response.Clear(); Response.ContentType = "image/png"; Response.WriteFile(file); Response.End(); } Om your pages where you need indicator you can set image source to Indicator.aspx (if you named your indicator handling file like this) and add percent as query string: <img src="Indicator.aspx?percent=30" /> That’s it! If somebody knows simpler way how to generate indicators like this I am interested in your feedback.

Read the article

Implementation of Nib project to Storyboard, Xcode

- by Blake Loizides

I have made a tabbed bar application in storyboard in xcode. I,m new to xcode. I got a Sample TableView XIB project from apple that I edited to my needs,The project has a UITableView that I Customized with Images, And with help of a certain forum member I was able to link up each image to a New View Controller. I tried to port or integrate My Nib Project Code to my StoryBoard Tabbed Bar Application.I thought I had everything right had to comment out a few things to get no errors, But the project only goes to a Blank Table View. Below are 2 links, 1 to my StoryBoard Tabbed Bar Application with the Table Code that I tried to integrate and the other My Successful Nib Project. Also is some code and pictures. If anybody has some free time and does not mind to help I would be extremely grateful for any input given. link1 - Storyboard link2 - XIB DecorsViewController_iPhone.m // // TableViewsViewController.m // TableViews // // Created by Axit Patel on 9/2/10. // Copyright Bayside High School 2010. All rights reserved. // #import "DecorsViewController_iPhone.h" #import "SelectedCellViewController.h" @implementation DecorsViewController_iPhone #pragma mark - Synthesizers @synthesize sitesArray; @synthesize imagesArray; #pragma mark - View lifecycle // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { // Load up the sitesArray with a dummy array : sites NSArray *sites = [[NSArray alloc] initWithObjects:@"a", @"b", @"c", @"d", @"e", @"f", @"g", @"h", nil]; self.sitesArray = sites; //[sites release]; UIImage *PlumTree = [UIImage imageNamed:@"a.png"]; UIImage *CherryRoyale = [UIImage imageNamed:@"b.png"]; UIImage *MozambiqueWenge = [UIImage imageNamed:@"c.png"]; UIImage *RoyaleMahogany = [UIImage imageNamed:@"d.png"]; UIImage *Laricina = [UIImage imageNamed:@"e.png"]; UIImage *BurntOak = [UIImage imageNamed:@"f.png"]; UIImage *AutrianOak = [UIImage imageNamed:@"g.png"]; UIImage *SilverAcacia = [UIImage imageNamed:@"h.png"]; NSArray *images = [[NSArray alloc] initWithObjects: PlumTree, CherryRoyale, MozambiqueWenge, RoyaleMahogany, Laricina, BurntOak, AutrianOak, SilverAcacia, nil]; self.imagesArray = images; //[images release]; [super viewDidLoad]; } #pragma mark - Table View datasource methods // Required Methods // Return the number of rows in a section - (NSInteger)tableView:(UITableView *)table numberOfRowsInSection:(NSInteger)section { return [sitesArray count]; } // Returns cell to render for each row - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"CellIdentifier"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; cell = [[UITableViewCell alloc] initWithStyle:UITableViewCellStyleSubtitle reuseIdentifier:CellIdentifier]; // Configure cell NSUInteger row = [indexPath row]; // Sets the text for the cell //cell.textLabel.text = [sitesArray objectAtIndex:row]; // Sets the imageview for the cell cell.imageView.image = [imagesArray objectAtIndex:row]; // Sets the accessory for the cell cell.accessoryType = UITableViewCellAccessoryDisclosureIndicator; // Sets the detailtext for the cell (subtitle) //cell.detailTextLabel.text = [NSString stringWithFormat:@"This is row: %i", row + 1]; return cell; } // Optional // Returns the number of section in a table view -(NSInteger) numberOfSectionsInTableView:(UITableView *)tableView { return 1; } #pragma mark - #pragma mark Table View delegate methods // Return the height for each cell -(CGFloat) tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath { return 78; } // Sets the title for header in the tableview -(NSString *) tableView:(UITableView *)tableView titleForHeaderInSection:(NSInteger)section { return @"Decors"; } // Sets the title for footer -(NSString *) tableView:(UITableView *)tableView titleForFooterInSection:(NSInteger)section { return @"Decors"; } // Sets the indentation for rows -(NSInteger) tableView:(UITableView *)tableView indentationLevelForRowAtIndexPath:(NSIndexPath *)indexPath { return 0; } // Method that gets called from the "Done" button (From the @selector in the line - [viewControllerToShow.navigationItem setRightBarButtonItem:[[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(dismissView)] autorelease]];) - (void)dismissView { [self dismissViewControllerAnimated:YES completion:NULL]; } // This method is run when the user taps the row in the tableview - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath { [tableView deselectRowAtIndexPath:indexPath animated:YES]; SelectedCellViewController *viewControllerToShow = [[SelectedCellViewController alloc] initWithNibName:@"SelectedCellViewController" bundle:[NSBundle mainBundle]]; [viewControllerToShow setLabelText:[NSString stringWithFormat:@"You selected cell: %d - %@", indexPath.row, [sitesArray objectAtIndex:indexPath.row]]]; [viewControllerToShow setImage:(UIImage *)[imagesArray objectAtIndex:indexPath.row]]; [viewControllerToShow setModalPresentationStyle:UIModalPresentationFormSheet]; [viewControllerToShow setModalTransitionStyle:UIModalTransitionStyleFlipHorizontal]; [viewControllerToShow.navigationItem setRightBarButtonItem:[[UIBarButtonItem alloc] initWithBarButtonSystemItem:UIBarButtonSystemItemDone target:self action:@selector(dismissView)]]; UINavigationController *navController = [[UINavigationController alloc] initWithRootViewController:viewControllerToShow]; viewControllerToShow = nil; [self presentViewController:navController animated:YES completion:NULL]; navController = nil; // UIAlertView *alert = [[UIAlertView alloc] initWithTitle:@"Tapped row!" // message:[NSString stringWithFormat:@"You tapped: %@", [sitesArray objectAtIndex:indexPath.row]] // delegate:nil // cancelButtonTitle:@"Yes, I did!" // otherButtonTitles:nil]; // [alert show]; // [alert release]; } #pragma mark - Memory management - (void)didReceiveMemoryWarning { NSLog(@"Memory Warning!"); [super didReceiveMemoryWarning]; } - (void)viewDidUnload { self.sitesArray = nil; self.imagesArray = nil; [super viewDidUnload]; } //- (void)dealloc { //[sitesArray release]; //[imagesArray release]; // [super dealloc]; //} //@end //- (void)viewDidUnload //{ // [super viewDidUnload]; // Release any retained subviews of the main view. //} - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { if ([[UIDevice currentDevice] userInterfaceIdiom] == UIUserInterfaceIdiomPhone) { return (interfaceOrientation != UIInterfaceOrientationPortraitUpsideDown); } else { return YES; } } @end DecorsViewController_iPhone.h #import <UIKit/UIKit.h> @interface DecorsViewController_iPhone : UIViewController <UITableViewDelegate, UITableViewDataSource> { NSArray *sitesArray; NSArray *imagesArray; } @property (nonatomic, retain) NSArray *sitesArray; @property (nonatomic, retain) NSArray *imagesArray; @end SelectedCellViewController.m #import "SelectedCellViewController.h" @implementation SelectedCellViewController @synthesize labelText; @synthesize image; - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if ((self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil])) { } return self; } - (void)didReceiveMemoryWarning { [super didReceiveMemoryWarning]; } #pragma mark - View lifecycle - (void)viewDidLoad { [super viewDidLoad]; [label setText:self.labelText]; [imageView setImage:self.image]; } - (void)viewDidUnload { self.labelText = nil; self.image = nil; // [label release]; // [imageView release]; [super viewDidUnload]; } - (BOOL)shouldAutorotateToInterfaceOrientation: (UIInterfaceOrientation)interfaceOrientation { return (interfaceOrientation == UIInterfaceOrientationPortrait); } @end SelectedCellViewController.h @interface SelectedCellViewController : UIViewController { NSString *labelText; UIImage *image; IBOutlet UILabel *label; IBOutlet UIImageView *imageView; } @property (nonatomic, copy) NSString *labelText; @property (nonatomic, retain) UIImage *image; @end

Read the article

How would I define "GetDataFromNumber" so that my class contains a definition?

- by JB

My code gets an error saying: 'Eagle_Eye_Class_Finder.GetSchedule' does not contain a definition for 'GetDataFromNumber' and no extension method 'GetDataFromNumber'. using System; using System.IO; using System.Data; using System.Text; using System.Drawing; using System.Data.OleDb; using System.Collections; using System.Windows.Forms; using System.ComponentModel; using System.Drawing.Printing; using System.Collections.Generic; namespace Eagle_Eye_Class_Finder { /// This form is the entry form, it is the first form the user will see when the app is run. /// public class Form1 : System.Windows.Forms.Form { private System.Windows.Forms.TextBox textBox1; private System.Windows.Forms.ProgressBar progressBar1; private System.Windows.Forms.PictureBox pictureBox1; private System.Windows.Forms.Button button2; private System.Windows.Forms.DateTimePicker dateTimePicker1; private IContainer components; private Timer timer1; private BindingSource form1BindingSource; public static Form Mainform = null; // creates new instance of second form YOURCLASSSCHEDULE SecondForm = new YOURCLASSSCHEDULE(); public Form1() { InitializeComponent(); // TODO: Add any constructor code after InitializeComponent call } /// Clean up any resources being used. protected override void Dispose(bool disposing) { if (disposing) { if (components != null) { components.Dispose(); } } base.Dispose(disposing); } #region Windows Form Designer generated code /// <summary> /// Required method for Designer support - do not modify /// the contents of this method with the code editor. /// </summary> private void InitializeComponent() { this.components = new System.ComponentModel.Container(); System.ComponentModel.ComponentResourceManager resources = new System.ComponentModel.ComponentResourceManager(typeof(Form1)); this.textBox1 = new System.Windows.Forms.TextBox(); this.progressBar1 = new System.Windows.Forms.ProgressBar(); this.pictureBox1 = new System.Windows.Forms.PictureBox(); this.button2 = new System.Windows.Forms.Button(); this.dateTimePicker1 = new System.Windows.Forms.DateTimePicker(); this.timer1 = new System.Windows.Forms.Timer(this.components); this.form1BindingSource = new System.Windows.Forms.BindingSource(this.components); ((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).BeginInit(); ((System.ComponentModel.ISupportInitialize)(this.form1BindingSource)).BeginInit(); this.SuspendLayout(); // // textBox1 // this.textBox1.BackColor = System.Drawing.SystemColors.ActiveCaption; this.textBox1.DataBindings.Add(new System.Windows.Forms.Binding("Text", this.form1BindingSource, "Text", true, System.Windows.Forms.DataSourceUpdateMode.OnValidation, null, "900456317")); this.textBox1.Location = new System.Drawing.Point(328, 280); this.textBox1.Name = "textBox1"; this.textBox1.Size = new System.Drawing.Size(208, 20); this.textBox1.TabIndex = 2; this.textBox1.TextChanged += new System.EventHandler(this.textBox1_TextChanged); // // progressBar1 // this.progressBar1.Location = new System.Drawing.Point(258, 410); this.progressBar1.MarqueeAnimationSpeed = 10; this.progressBar1.Name = "progressBar1"; this.progressBar1.Size = new System.Drawing.Size(344, 8); this.progressBar1.TabIndex = 3; this.progressBar1.Click += new System.EventHandler(this.progressBar1_Click); // // pictureBox1 // this.pictureBox1.BackColor = System.Drawing.SystemColors.ControlLightLight; this.pictureBox1.BorderStyle = System.Windows.Forms.BorderStyle.Fixed3D; this.pictureBox1.Image = ((System.Drawing.Image)(resources.GetObject("pictureBox1.Image"))); this.pictureBox1.Location = new System.Drawing.Point(680, 400); this.pictureBox1.Name = "pictureBox1"; this.pictureBox1.Size = new System.Drawing.Size(120, 112); this.pictureBox1.TabIndex = 4; this.pictureBox1.TabStop = false; this.pictureBox1.Click += new System.EventHandler(this.pictureBox1_Click); // // button2 // this.button2.Font = new System.Drawing.Font("Mistral", 15.75F, System.Drawing.FontStyle.Regular, System.Drawing.GraphicsUnit.Point, ((byte)(0))); this.button2.Image = ((System.Drawing.Image)(resources.GetObject("button2.Image"))); this.button2.Location = new System.Drawing.Point(699, 442); this.button2.Name = "button2"; this.button2.Size = new System.Drawing.Size(78, 28); this.button2.TabIndex = 5; this.button2.Text = "OK"; this.button2.Click += new System.EventHandler(this.button2_Click); // // dateTimePicker1 // this.dateTimePicker1.Location = new System.Drawing.Point(336, 104); this.dateTimePicker1.Name = "dateTimePicker1"; this.dateTimePicker1.Size = new System.Drawing.Size(200, 20); this.dateTimePicker1.TabIndex = 6; this.dateTimePicker1.ValueChanged += new System.EventHandler(this.dateTimePicker1_ValueChanged); // // timer1 // this.timer1.Tick += new System.EventHandler(this.timer1_Tick); // // form1BindingSource // this.form1BindingSource.DataSource = typeof(Eagle_Eye_Class_Finder.Form1); // // Form1 // this.AcceptButton = this.button2; this.AutoScaleBaseSize = new System.Drawing.Size(5, 13); this.BackgroundImage = ((System.Drawing.Image)(resources.GetObject("$this.BackgroundImage"))); this.BackgroundImageLayout = System.Windows.Forms.ImageLayout.Stretch; this.ClientSize = new System.Drawing.Size(856, 556); this.Controls.Add(this.dateTimePicker1); this.Controls.Add(this.button2); this.Controls.Add(this.pictureBox1); this.Controls.Add(this.progressBar1); this.Controls.Add(this.textBox1); this.Name = "Form1"; this.Text = "Eagle Eye Class Finder"; this.Load += new System.EventHandler(this.Form1_Load); ((System.ComponentModel.ISupportInitialize)(this.pictureBox1)).EndInit(); ((System.ComponentModel.ISupportInitialize)(this.form1BindingSource)).EndInit(); this.ResumeLayout(false); this.PerformLayout(); } #endregion /// The main entry point for the application. [STAThread] static void Main() { Application.Run(new Form1()); } public void Form1_Load(object sender, System.EventArgs e) { } public void textBox1_TextChanged(object sender, System.EventArgs e) { //allows only numbers to be entered in textbox string Str = textBox1.Text.Trim(); double Num; bool isNum = double.TryParse(Str, out Num); if (isNum) Console.ReadLine(); else MessageBox.Show("Enter A Valid ID Number!"); } public void button2_Click(object sender, System.EventArgs e) { string text = textBox1.Text; Mainform = this; this.Hide(); GetSchedule myScheduleFinder = new GetSchedule(); string result = myScheduleFinder.GetDataFromNumber(text);<<<-----MY PROBLEM if (!string.IsNullOrEmpty(result)) { MessageBox.Show(result); } else { MessageBox.Show("Enter A Valid ID Number!"); } } public void dateTimePicker1_ValueChanged(object sender, System.EventArgs e) { } public void pictureBox1_Click(object sender, System.EventArgs e) { } public void progressBar1_Click(object sender, EventArgs e) { //this.progressBar1 = new System.progressBar1(); //progressBar1.Maximum = 200; //progressBar1.Minimum = 0; //progressBar1.Step = 20; } private void timer1_Tick(object sender, EventArgs e) { //if (progressBar1.Value >= 200 ) //{ //progressBar1.Value = 0; //} //return; //} //progressBar1.Value != 20; } } }

Read the article

Announcing the release of the Windows Azure SDK 2.1 for .NET

- by ScottGu

Today we released the v2.1 update of the Windows Azure SDK for .NET. This is a major refresh of the Windows Azure SDK and it includes some great new features and enhancements. These new capabilities include: Visual Studio 2013 Preview Support: The Windows Azure SDK now supports using the new VS 2013 Preview Visual Studio 2013 VM Image: Windows Azure now has a built-in VM image that you can use to host and develop with VS 2013 in the cloud Visual Studio Server Explorer Enhancements: Redesigned with improved filtering and auto-loading of subscription resources Virtual Machines: Start and Stop VM’s w/suspend billing directly from within Visual Studio Cloud Services: New Emulator Express option with reduced footprint and Run as Normal User support Service Bus: New high availability options, Notification Hub support, Improved VS tooling PowerShell Automation: Lots of new PowerShell commands for automating Web Sites, Cloud Services, VMs and more All of these SDK enhancements are now available to start using immediately and you can download the SDK from the Windows Azure .NET Developer Center. Visual Studio’s Team Foundation Service (http://tfs.visualstudio.com/) has also been updated to support today’s SDK 2.1 release, and the SDK 2.1 features can now be used with it (including with automated builds + tests). Below are more details on the new features and capabilities released today: Visual Studio 2013 Preview Support Today’s Window Azure SDK 2.1 release adds support for the recent Visual Studio 2013 Preview. The 2.1 SDK also works with Visual Studio 2010 and Visual Studio 2012, and works side by side with the previous Windows Azure SDK 1.8 and 2.0 releases. To install the Windows Azure SDK 2.1 on your local computer, choose the “install the sdk” link from the Windows Azure .NET Developer Center. Then, chose which version of Visual Studio you want to use it with. Clicking the third link will install the SDK with the latest VS 2013 Preview: If you don’t already have the Visual Studio 2013 Preview installed on your machine, this will also install Visual Studio Express 2013 Preview for Web. Visual Studio 2013 VM Image Hosted in the Cloud One of the requests we’ve heard from several customers has been to have the ability to host Visual Studio within the cloud (avoiding the need to install anything locally on your computer). With today’s SDK update we’ve added a new VM image to the Windows Azure VM Gallery that has Visual Studio Ultimate 2013 Preview, SharePoint 2013, SQL Server 2012 Express and the Windows Azure 2.1 SDK already installed on it. This provides a really easy way to create a development environment in the cloud with the latest tools. With the recent shutdown and suspend billing feature we shipped on Windows Azure last month, you can spin up the image only when you want to do active development, and then shut down the virtual machine and not have to worry about usage charges while the virtual machine is not in use. You can create your own VS image in the cloud by using the New->Compute->Virtual Machine->From Gallery menu within the Windows Azure Management Portal, and then by selecting the “Visual Studio Ultimate 2013 Preview” template: Visual Studio Server Explorer: Improved Filtering/Management of Subscription Resources With the Windows Azure SDK 2.1 release you’ll notice significant improvements in the Visual Studio Server Explorer. The explorer has been redesigned so that all Windows Azure services are now contained under a single Windows Azure node. From the top level node you can now manage your Windows Azure credentials, import a subscription file or filter Server Explorer to only show services from particular subscriptions or regions. Note: The Web Sites and Mobile Services nodes will appear outside the Windows Azure Node until the final release of VS 2013. If you have installed the ASP.NET and Web Tools Preview Refresh, though, the Web Sites node will appear inside the Windows Azure node even with the VS 2013 Preview. Once your subscription information is added, Windows Azure services from all your subscriptions are automatically enumerated in the Server Explorer. You no longer need to manually add services to Server Explorer individually. This provides a convenient way of viewing all of your cloud services, storage accounts, service bus namespaces, virtual machines, and web sites from one location: Subscription and Region Filtering Support Using the Windows Azure node in Server Explorer, you can also now filter your Windows Azure services in the Server Explorer by the subscription or region they are in. If you have multiple subscriptions but need to focus your attention to just a few subscription for some period of time, this a handy way to hide the services from other subscriptions view until they become relevant. You can do the same sort of filtering by region. To enable this, just select “Filter Services” from the context menu on the Windows Azure node: Then choose the subscriptions and/or regions you want to filter by. In the below example, I’ve decided to show services from my pay-as-you-go subscription within the East US region: Visual Studio will then automatically filter the items that show up in the Server Explorer appropriately: With storage accounts and service bus namespaces, you sometimes need to work with services outside your subscription. To accommodate that scenario, those services allow you to attach an external account (from the context menu). You’ll notice that external accounts have a slightly different icon in server explorer to indicate they are from outside your subscription. Other Improvements We’ve also improved the Server Explorer by adding additional properties and actions to the service exposed. You now have access to most of the properties on a cloud service, deployment slot, role or role instance as well as the properties on storage accounts, virtual machines and web sites. Just select the object of interest in Server Explorer and view the properties in the property pane. We also now have full support for creating/deleting/update storage tables, blobs and queues from directly within Server Explorer. Simply right-click on the appropriate storage account node and you can create them directly within Visual Studio: Virtual Machines: Start/Stop within Visual Studio Virtual Machines now have context menu actions that allow you start, shutdown, restart and delete a Virtual Machine directly within the Visual Studio Server Explorer. The shutdown action enables you to shut down the virtual machine and suspend billing when the VM is not is use, and easily restart it when you need it: This is especially useful in Dev/Test scenarios where you can start a VM – such as a SQL Server – during your development session and then shut it down / suspend billing when you are not developing (and no longer be billed for it). You can also now directly remote desktop into VMs using the “Connect using Remote Desktop” context menu command in VS Server Explorer. Cloud Services: Emulator Express with Run as Normal User Support You can now launch Visual Studio and run your cloud services locally as a Normal User (without having to elevate to an administrator account) using a new Emulator Express option included as a preview feature with this SDK release. Emulator Express is a version of the Windows Azure Compute Emulator that runs a restricted mode – one instance per role – and it doesn’t require administrative permissions and uses 40% less resources than the full Windows Azure Emulator. Emulator Express supports both web and worker roles. To run your application locally using the Emulator Express option, simply change the following settings in the Windows Azure project. On the shortcut menu for the Windows Azure project, choose Properties, and then choose the Web tab. Check the setting for IIS (Internet Information Services). Make sure that the option is set to IIS Express, not the full version of IIS. Emulator Express is not compatible with full IIS. On the Web tab, choose the option for Emulator Express. Service Bus: Notification Hubs With the Windows Azure SDK 2.1 release we are adding support for Windows Azure Notification Hubs as part of our official Windows Azure SDK, inside of Microsoft.ServiceBus.dll (previously the Notification Hub functionality was in a preview assembly). You are now able to create, update and delete Notification Hubs programmatically, manage your device registrations, and send push notifications to all your mobile clients across all platforms (Windows Store, Windows Phone 8, iOS, and Android). Learn more about Notification Hubs on MSDN here, or watch the Notification Hubs //BUILD/ presentation here. Service Bus: Paired Namespaces One of the new features included with today’s Windows Azure SDK 2.1 release is support for Service Bus “Paired Namespaces”. Paired Namespaces enable you to better handle situations where a Service Bus service namespace becomes unavailable (for example: due to connectivity issues or an outage) and you are unable to send or receive messages to the namespace hosting the queue, topic, or subscription. Previously,to handle this scenario you had to manually setup separate namespaces that can act as a backup, then implement manual failover and retry logic which was sometimes tricky to get right. Service Bus now supports Paired Namespaces, which enables you to connect two namespaces together. When you activate the secondary namespace, messages are stored in the secondary queue for delivery to the primary queue at a later time. If the primary container (namespace) becomes unavailable for some reason, automatic failover enables the messages in the secondary queue. For detailed information about paired namespaces and high availability, see the new topic Asynchronous Messaging Patterns and High Availability. Service Bus: Tooling Improvements In this release, the Windows Azure Tools for Visual Studio contain several enhancements and changes to the management of Service Bus messaging entities using Visual Studio’s Server Explorer. The most noticeable change is that the Service Bus node is now integrated into the Windows Azure node, and supports integrated subscription management. Additionally, there has been a change to the code generated by the Windows Azure Worker Role with Service Bus Queue project template. This code now uses an event-driven “message pump” programming model using the QueueClient.OnMessage method. PowerShell: Tons of New Automation Commands Since my last blog post on the previous Windows Azure SDK 2.0 release, we’ve updated Windows Azure PowerShell (which is a separate download) five times. You can find the full change log here. We’ve added new cmdlets in the following areas: China instance and Windows Azure Pack support Environment Configuration VMs Cloud Services Web Sites Storage SQL Azure Service Bus China Instance and Windows Azure Pack We now support the following cmdlets for the China instance and Windows Azure Pack, respectively: China Instance: Web Sites, Service Bus, Storage, Cloud Service, VMs, Network Windows Azure Pack: Web Sites, Service Bus We will have full cmdlet support for these two Windows Azure environments in PowerShell in the near future. Virtual Machines: Stop/Start Virtual Machines Similar to the Start/Stop VM capability in VS Server Explorer, you can now stop your VM and suspend billing: If you want to keep the original behavior of keeping your stopped VM provisioned, you can pass in the -StayProvisioned switch parameter. Virtual Machines: VM endpoint ACLs We’ve added and updated a bunch of cmdlets for you to configure fine-grained network ACL on your VM endpoints. You can use the following cmdlets to create ACL config and apply them to a VM endpoint: New-AzureAclConfig Get-AzureAclConfig Set-AzureAclConfig Remove-AzureAclConfig Add-AzureEndpoint -ACL Set-AzureEndpoint –ACL The following example shows how to add an ACL rule to an existing endpoint of a VM. Other improvements for Virtual Machine management includes Added -NoWinRMEndpoint parameter to New-AzureQuickVM and Add-AzureProvisioningConfig to disable Windows Remote Management Added -DirectServerReturn parameter to Add-AzureEndpoint and Set-AzureEndpoint to enable/disable direct server return Added Set-AzureLoadBalancedEndpoint cmdlet to modify load balanced endpoints Cloud Services: Remote Desktop and Diagnostics Remote Desktop and Diagnostics are popular debugging options for Cloud Services. We’ve introduced cmdlets to help you configure these two Cloud Service extensions from Windows Azure PowerShell. Windows Azure Cloud Services Remote Desktop extension: New-AzureServiceRemoteDesktopExtensionConfig Get-AzureServiceRemoteDesktopExtension Set-AzureServiceRemoteDesktopExtension Remove-AzureServiceRemoteDesktopExtension Windows Azure Cloud Services Diagnostics extension New-AzureServiceDiagnosticsExtensionConfig Get-AzureServiceDiagnosticsExtension Set-AzureServiceDiagnosticsExtension Remove-AzureServiceDiagnosticsExtension The following example shows how to enable Remote Desktop for a Cloud Service. Web Sites: Diagnostics With our last SDK update, we introduced the Get-AzureWebsiteLog –Tail cmdlet to get the log streaming of your Web Sites. Recently, we’ve also added cmdlets to configure Web Site application diagnostics: Enable-AzureWebsiteApplicationDiagnostic Disable-AzureWebsiteApplicationDiagnostic The following 2 examples show how to enable application diagnostics to the file system and a Windows Azure Storage Table: SQL Database Previously, you had to know the SQL Database server admin username and password if you want to manage the database in that SQL Database server. Recently, we’ve made the experience much easier by not requiring the admin credential if the database server is in your subscription. So you can simply specify the -ServerName parameter to tell Windows Azure PowerShell which server you want to use for the following cmdlets. Get-AzureSqlDatabase New-AzureSqlDatabase Remove-AzureSqlDatabase Set-AzureSqlDatabase We’ve also added a -AllowAllAzureServices parameter to New-AzureSqlDatabaseServerFirewallRule so that you can easily add a firewall rule to whitelist all Windows Azure IP addresses. Besides the above experience improvements, we’ve also added cmdlets get the database server quota and set the database service objective. Check out the following cmdlets for details. Get-AzureSqlDatabaseServerQuota Get-AzureSqlDatabaseServiceObjective Set-AzureSqlDatabase –ServiceObjective Storage and Service Bus Other new cmdlets include Storage: CRUD cmdlets for Azure Tables and Queues Service Bus: Cmdlets for managing authorization rules on your Service Bus Namespace, Queue, Topic, Relay and NotificationHub Summary Today’s release includes a bunch of great features that enable you to build even better cloud solutions. All the above features/enhancements are shipped and available to use immediately as part of the 2.1 release of the Windows Azure SDK for .NET. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today. Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

Read the article

CodePlex Daily Summary for Monday, June 27, 2011

CodePlex Daily Summary for Monday, June 27, 2011Popular ReleasesSQL Compact Bulk Insert Library: beta 2.0: Update, with ColumnMappings and support for IEnumerable implemented (for most data types, anyway).MiniTwitter: 1.71: MiniTwitter 1.71 ???? ?? OAuth ???????????? ????????、??????????????????? ???????????????????????SizeOnDisk: 1.0.10.0: Fix: issue 327: size format error when save settings Fix: some UI bindings trouble (sorting, refresh) Fix: user settings file deletion when corrupted Feature: TreeView virtualization (better speed with many folders) Feature: New file type DataGrid column Feature: In KByte view, show size of file < 1024B and > 0 with 3 decimal Feature: New language: Italian Task: Cleanup for speedRawr: Rawr 4.2.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...HD-Trailers.NET Downloader: HD-Trailer.net Downloader 1.86: This version implements a new config flag "ConsiderTheatricalandNumberedTrailersasIdentical" that for the purposes of Exclusions only Teaser Trailer and one Trailer (named Trailer, Theatrical Traler Trailer No. 1, Trailer 1, Trailer No. 2, etc) will be downloaded. This also includes a bug fix where the .nfo file did not include the -trailer if configured for XBMC.N2 CMS: 2.2: * Web platform installer support available ** Nuget support available What's newDinamico Templates (beta) - an MVC3 & Razor based template pack using the template-first! development paradigm Boilerplate CSS & HTML5 Advanced theming with css comipilation (concrete, dark, roadwork, terracotta) Template-first! development style Content, news, listing, slider, image sizes, search, sitemap, globalization, youtube, google map Display Tokens - replaces text tokens with rendered content (usag...TerrariViewer: TerrariViewer v4.0 [Terraria Inventory Editor]: Version 4.0 Changelog Continued support for Terraria v1.0.5 Fixed image display problem (Major Issue) Added Buff tabs to allowed editing character buffs Added support for displays whose DPI is set to 120 (Major Issue) Added support for screen resolutions that are horizontally smaller than 1280 (Major Issue) Changed the way users will select replacement items on multiple tabs Added items that were missing in the latest Terraria update Fixed various other bugsCoding4Fun Tools: Coding4Fun.Phone.Toolkit v1.4.2: All color pickers can have value set now and UX updates Bunch of fixes - see check-in notes and associated bugsMosaic Project: Mosaic Alpha Build 256: - Improved support for HTML widgets - Added options support for HTML widgets - Added hubs support for all widgets - Added Lock widget which shows Windows 8 like lock screen when you click on it - Added HTML Today widget (by Daniel Steiner)NCalc - Mathematical Expressions Evaluator for .NET: NCalc - 1.3.7: Fixing overflow when comparing long values Circuit Diagram: Circuit Diagram v0.5 Beta: New in this release: New components: Ammeter (meter) Voltmeter (meter) Undo/redo functionality for placing/moving components Choose resolution when exporting PNG image New logothinktecture WSCF.blue: WSCF.blue V1 Update (1.0.12): Features Added a new AutoSetSpecifiedPropertiesDecorator to automatically set the _Specified property to true when setter on matching property is called. Obviously this will only work when the Properties option is used. Bug Fixes Reduced the number of times menu visibility is updated in the SelectionEvents.OnChange event to help prevent OutOfMemoryException inside EnvDTE. Fixed NullReferenceException in OnTypeNameChanged method of MessageContractConverter. Improved validation of namespac....Net Image Processor: v1.0: Initial release of the library containing the core architecture and two filters. To install, extract the library to somewhere sensible then reference as a file from your project in Visual Studio.KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.Media Companion: MC 3.409b-1 Weekly: This weeks release is part way through a major rewrite of the TVShow code. This means that a few TV related features & functions are not fully operational at the moment. The reason for this release is so that people can see if their particular issue has been fixed during the week. Some issues may not be able to be fully checked due to the ongoing TV code refactoring. So, I would strongly suggest that you put this version into a separate folder, copy your settings folder across & test MC that...Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5CuttingEdge.Conditions: CuttingEdge.Conditions v1.2: CuttingEdge.Conditions is a library that helps developers to write pre- and postcondition validations in their C# 3.0 and VB.NET 9 code base. Writing these validations is easy and it improves the readability and maintainability of code. This release adds IsNullOrWhiteSpace and IsNotNullOrWhiteSpace extension methods for string arguments and a adds a WithExceptionOnFailure<TException>() method on the Condition class which allows users to specify the type of exception that will be thrown. Fo...patterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...DotNetNuke® Community Edition: 06.00.00 Beta: Beta 1 (Build 2300) includes many important enhancements to the user experience. The control panel has been updated for easier access to the most important features and additional forms have been adapted to the new pattern. This release also includes many bug fixes that make it more stable than previous CTP releases. Beta ForumsAcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta7: ??AcDown???????????????，?????????????????????。????????????????????，??Acfun、Bilibili、???、???、?????，???????????、???????。 AcDown???????????????????????????，???，???????????????????。 AcDown???????C#??，?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??：????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64)，?????"?????????"??? ??????????????，??????????： ??"AcDown?????"????????? ??v3.0 Beta7 ????????????? ???? ?? ????????????????? "??????"?????"?...New Projects.Net Micro Framework Contrib Library: Contrib library for the .Net Micro Framework..NET Notepad: this is my version of notepadAntLifeISEN: Projet de Découverte MISN P54 Simulation du comportement des fourmisApuracao AG: Estudos asp.net com MCV3apuracaoIK: estudos asp.net desenvolvimento manual;Bikirom BikiSoft: BikiRom BikiSoft windows interface to the BikiRom Megaboard series of real-time ecu retuning hardware.BlogSource: Blog Source.Carmilla Learning: Lessons for Camille Dollé, sup in Epita.Debug Single Thread: This Visual Studio 2010 extension adds two shortcuts and toolbar buttons to allow developers to easily focus on single threads while debugging multi-threaded applications. It dramatically reduces the need to manually go into the Threads window to freeze/thaw all threads but the one that needs to be followed, and therefore helps improve productivity. Features: - Restrict further execution to the current thread only. Will freeze all other threads. Shortcut: CTRL+T+T or snowflake button. -...Excel Viewer: Excel Viewer is a .net component that allows programmers to load excel application and also excel spreadsheets in our windows form. This component is useful for viewing excel reports in applications. This component is written in C# 2.0.Image Processor: The Image Processor in C#jQuery Mobile Extensions for ASP.Net MVC: jQMvc is a collection of extensions built on jQuery Mobile (currently in beta) that can be used with ASP.Net MVC to produce HTML5 based mobile applications. With jQMvc we'll be able to do the neat and powerful MVC stuff but for the emerging world of mobile HTML5 applications.just Think: This is about how to use ***** data for make a application on *****.Kinkuma Framework F# (Prism based F# MVVM Support Library): Kinkuma Framework?????F#?ViewModel?Model??????????????????????。Leuphana MyStudy Mobile: MyStudy schedule at your finger tips. Brings your Leuphana MyStudy schedule to your windows phone 7.maxtor1234test: this is my testMayhemModules: This project contains the modules from the Mayhem repository.PlaOrganizer: PLA Organizer helps create and manage playlist that is based on the PLA format. PowerSys: My Super PowerSystemSilverlight out-of-browser Contoso Dashboard: This is a small demonstration of the capabilities of Silverlight's out of browser mode. This projet includes : - Notification Windows - Unrestricted access to network (netTcpBinding) - Automatic updates (provided that you create your own trusted certificate) - Excel and Outlook Interop - Access to file system - Fullscreen modeSimple Binding Framework: Simple binding frameworkSimply BackUp Tool: A simple tool for backing up personal folders that is built in .Net with WPF. The tool will be updated for using latest techniques and technologies. In partnership with: http://www.ganahtech.comSoftware Botany Ivy - String Utils with CSV, Delimited, & Positional Text Parser: The Software Botany Ivy project is a library containing various string utilities. Included in the library are fluent APIs for parsing and creating delimited and fixed width positional text. Quoted CSV is supported. The library is built on .NET 4.0 using the C# language.Software Botany Sunlight - Word Aligned Hybrid Bit Vector Search Framework: The Software Botany Sunlight project is a search framework built using Word Aligned Hybrid Bit Vectors. Its sole purpose is to provide high performance in-memory searching of data using unknown combinations of indices. It is developed with .NET 4.0 using C#.Torrent file parsing, editing, and writing library: A fully functional library for reading and parsing bencode'd files (ie .torrent) into a fully editable DOM. Work with custom bencode'd file formats, or use strongly typed torrent file reading, modification, and writing. Written in C#.Tweeting Attendant: The Tweeting Attendant is a project created for the Adafruit Make It Tweet Challenge.UBL Larsen: UBL Larsen is a C# .NET 4.0 Class Library for reading/writing Universal Business Language (UBL) xml documents. No xml parsing is required. XmlSerializer will take care of the streaming for you. The library is custom generated from the "UBL 2.0 updated" xsd files to resemble the layout of the Oasis xsd file hierarchy. Some optimizations have been made in order to improve streaming speed and ease the job of for the developer. All of the types in Common Basic Components have been replaced. O...WenbianAsk: Ask system using WPF WP7 Transfer Data Tool: This tool is used to transfer data from PC to WP7. ???????: ?????

Read the article

TFS API Change WorkItem CreatedDate And ChangedDate To Historic Dates

- by Tarun Arora

There may be times when you need to modify the value of the fields “System.CreatedDate” and “System.ChangedDate” on a work item. Richard Hundhausen has a great blog with ample of reason why or why not you should need to set the values of these fields to historic dates. In this blog post I’ll show you, Create a PBI WorkItem linked to a Task work item by pre-setting the value of the field ‘System.ChangedDate’ to a historic date Change the value of the field ‘System.Created’ to a historic date Simulate the historic burn down of a task type work item in a sprint Explain the impact of updating values of the fields CreatedDate and ChangedDate on the Sprint burn down chart Rules of Play 1. You need to be a member of the Project Collection Service Accounts 2. You need to use ‘WorkItemStoreFlags.BypassRules’ when you instantiate the WorkItemStore service // Instanciate Work Item Store with the ByPassRules flag _wis = new WorkItemStore(_tfs, WorkItemStoreFlags.BypassRules); 3. You cannot set the ChangedDate - Less than the changed date of previous revision - Greater than current date Walkthrough The walkthrough contains 5 parts 00 – Required References 01 – Connect to TFS Programmatically 02 – Create a Work Item Programmatically 03 – Set the values of fields ‘System.ChangedDate’ and ‘System.CreatedDate’ to historic dates 04 – Results of our experiment Lets get started………………………………………………… 00 – Required References Microsoft.TeamFoundation.dll Microsoft.TeamFoundation.Client.dll Microsoft.TeamFoundation.Common.dll Microsoft.TeamFoundation.WorkItemTracking.Client.dll 01 – Connect to TFS Programmatically I have a in depth blog post on how to connect to TFS programmatically in case you are interested. However, the code snippet below will enable you to connect to TFS using the Team Project Picker. // Services I need access to globally private static TfsTeamProjectCollection _tfs; private static ProjectInfo _selectedTeamProject; private static WorkItemStore _wis; // Connect to TFS Using Team Project Picker public static bool ConnectToTfs() { var isSelected = false; // The user is allowed to select only one project var tfsPp = new TeamProjectPicker(TeamProjectPickerMode.SingleProject, false); tfsPp.ShowDialog(); // The TFS project collection _tfs = tfsPp.SelectedTeamProjectCollection; if (tfsPp.SelectedProjects.Any()) { // The selected Team Project _selectedTeamProject = tfsPp.SelectedProjects[0]; isSelected = true; } return isSelected; } 02 – Create a Work Item Programmatically In the below code snippet I have create a Product Backlog Item and a Task type work item and then link them together as parent and child. Note – You will have to set the ChangedDate to a historic date when you created the work item. Remember, If you try and set the ChangedDate to a value earlier than last assigned you will receive the following exception… TF26212: Team Foundation Server could not save your changes. There may be problems with the work item type definition. Try again or contact your Team Foundation Server administrator. If you notice below I have added a few seconds each time I have modified the ‘ChangedDate’ just to avoid running into the exception listed above. // Create Linked Work Items and return Ids private static List<int> CreateWorkItemsProgrammatically() { // Instantiate Work Item Store with the ByPassRules flag _wis = new WorkItemStore(_tfs, WorkItemStoreFlags.BypassRules); // List of work items to return var listOfWorkItems = new List<int>(); // Create a new Product Backlog Item var p = new WorkItem(_wis.Projects[_selectedTeamProject.Name].WorkItemTypes["Product Backlog Item"]); p.Title = "This is a new PBI"; p.Description = "Description"; p.IterationPath = string.Format("{0}\\Release 1\\Sprint 1", _selectedTeamProject.Name); p.AreaPath = _selectedTeamProject.Name; p["Effort"] = 10; // Just double checking that ByPassRules is set to true if (_wis.BypassRules) { p.Fields["System.ChangedDate"].Value = Convert.ToDateTime("2012-01-01"); } if (p.Validate().Count == 0) { p.Save(); listOfWorkItems.Add(p.Id); } else { Console.WriteLine(">> Following exception(s) encountered during work item save: "); foreach (var e in p.Validate()) { Console.WriteLine(" - '{0}' ", e); } } var t = new WorkItem(_wis.Projects[_selectedTeamProject.Name].WorkItemTypes["Task"]); t.Title = "This is a task"; t.Description = "Task Description"; t.IterationPath = string.Format("{0}\\Release 1\\Sprint 1", _selectedTeamProject.Name); t.AreaPath = _selectedTeamProject.Name; t["Remaining Work"] = 10; if (_wis.BypassRules) { t.Fields["System.ChangedDate"].Value = Convert.ToDateTime("2012-01-01"); } if (t.Validate().Count == 0) { t.Save(); listOfWorkItems.Add(t.Id); } else { Console.WriteLine(">> Following exception(s) encountered during work item save: "); foreach (var e in t.Validate()) { Console.WriteLine(" - '{0}' ", e); } } var linkTypEnd = _wis.WorkItemLinkTypes.LinkTypeEnds["Child"]; p.Links.Add(new WorkItemLink(linkTypEnd, t.Id) {ChangedDate = Convert.ToDateTime("2012-01-01").AddSeconds(20)}); if (_wis.BypassRules) { p.Fields["System.ChangedDate"].Value = Convert.ToDateTime("2012-01-01").AddSeconds(20); } if (p.Validate().Count == 0) { p.Save(); } else { Console.WriteLine(">> Following exception(s) encountered during work item save: "); foreach (var e in p.Validate()) { Console.WriteLine(" - '{0}' ", e); } } return listOfWorkItems; } 03 – Set the value of “Created Date” and Change the value of “Changed Date” to Historic Dates The CreatedDate can only be changed after a work item has been created. If you try and set the CreatedDate to a historic date at the time of creation of a work item, it will not work. // Lets do a work item effort burn down simulation by updating the ChangedDate & CreatedDate to historic Values private static void WorkItemChangeSimulation(IEnumerable<int> listOfWorkItems) { foreach (var id in listOfWorkItems) { var wi = _wis.GetWorkItem(id); switch (wi.Type.Name) { case "ProductBacklogItem": if (wi.State.ToLower() == "new") wi.State = "Approved"; // Advance the changed date by few seconds wi.Fields["System.ChangedDate"].Value = Convert.ToDateTime(wi.Fields["System.ChangedDate"].Value).AddSeconds(10); // Set the CreatedDate to Changed Date wi.Fields["System.CreatedDate"].Value = Convert.ToDateTime(wi.Fields["System.ChangedDate"].Value).AddSeconds(10); wi.Save(); break; case "Task": // Advance the changed date by few seconds wi.Fields["System.ChangedDate"].Value = Convert.ToDateTime(wi.Fields["System.ChangedDate"].Value).AddSeconds(10); // Set the CreatedDate to Changed date wi.Fields["System.CreatedDate"].Value = Convert.ToDateTime(wi.Fields["System.ChangedDate"].Value).AddSeconds(10); wi.Save(); break; } } // A mock sprint start date var sprintStart = DateTime.Today.AddDays(-5); // A mock sprint end date var sprintEnd = DateTime.Today.AddDays(5); // What is the total Sprint duration var totalSprintDuration = (sprintEnd - sprintStart).Days; // How much of the sprint have we already covered var noOfDaysIntoSprint = (DateTime.Today - sprintStart).Days; // Get the effort assigned to our tasks var totalEffortRemaining = QueryTaskTotalEfforRemaining(listOfWorkItems); // Defining how much effort to burn every day decimal dailyBurnRate = totalEffortRemaining / totalSprintDuration < 1 ? 1 : totalEffortRemaining / totalSprintDuration; // we have just created one task var totalNoOfTasks = 1; var simulation = sprintStart; var currentDate = DateTime.Today.Date; // Carry on till effort has been burned down from sprint start to today while (simulation.Date != currentDate.Date) { var dailyBurnRate1 = dailyBurnRate; // A fixed amount needs to be burned down each day while (dailyBurnRate1 > 0) { // burn down bit by bit from all unfinished task type work items foreach (var id in listOfWorkItems) { var wi = _wis.GetWorkItem(id); var isDirty = false; // Set the status to in progress if (wi.State.ToLower() == "to do") { wi.State = "In Progress"; isDirty = true; } // Ensure that there is enough effort remaining in tasks to burn down the daily burn rate if (QueryTaskTotalEfforRemaining(listOfWorkItems) > dailyBurnRate1) { // If there is less than 1 unit of effort left in the task, burn it all if (Convert.ToDecimal(wi["Remaining Work"]) <= 1) { wi["Remaining Work"] = 0; dailyBurnRate1 = dailyBurnRate1 - Convert.ToDecimal(wi["Remaining Work"]); isDirty = true; } else { // How much to burn from each task? var toBurn = (dailyBurnRate / totalNoOfTasks) < 1 ? 1 : (dailyBurnRate / totalNoOfTasks); // Check that the task has enough effort to allow burnForTask effort if (Convert.ToDecimal(wi["Remaining Work"]) >= toBurn) { wi["Remaining Work"] = Convert.ToDecimal(wi["Remaining Work"]) - toBurn; dailyBurnRate1 = dailyBurnRate1 - toBurn; isDirty = true; } else { wi["Remaining Work"] = 0; dailyBurnRate1 = dailyBurnRate1 - Convert.ToDecimal(wi["Remaining Work"]); isDirty = true; } } } else { dailyBurnRate1 = 0; } if (isDirty) { if (Convert.ToDateTime(wi.Fields["System.ChangedDate"].Value).Date == simulation.Date) { wi.Fields["System.ChangedDate"].Value = Convert.ToDateTime(wi.Fields["System.ChangedDate"].Value).AddSeconds(20); } else { wi.Fields["System.ChangedDate"].Value = simulation.AddSeconds(20); } wi.Save(); } } } // Increase date by 1 to perform daily burn down by day simulation = Convert.ToDateTime(simulation).AddDays(1); } } // Get the Total effort remaining in the current sprint private static decimal QueryTaskTotalEfforRemaining(List<int> listOfWorkItems) { var unfinishedWorkInCurrentSprint = _wis.GetQueryDefinition( new Guid(QueryAndGuid.FirstOrDefault(c => c.Key == "Unfinished Work").Value)); var parameters = new Dictionary<string, object> { { "project", _selectedTeamProject.Name } }; var q = new Query(_wis, unfinishedWorkInCurrentSprint.QueryText, parameters); var results = q.RunLinkQuery(); var wis = new List<WorkItem>(); foreach (var result in results) { var _wi = _wis.GetWorkItem(result.TargetId); if (_wi.Type.Name == "Task" && listOfWorkItems.Contains(_wi.Id)) wis.Add(_wi); } return wis.Sum(r => Convert.ToDecimal(r["Remaining Work"])); } 04 – The Results If you are still reading, the results are beautiful! Image 1 – Create work item with Changed Date pre-set to historic date Image 2 – Set the CreatedDate to historic date (Same as the ChangedDate) Image 3 – Simulate of effort burn down on a task via the TFS API Image 4 – The history of changes on the Task. So, essentially this task has burned 1 hour per day Sprint Burn Down Chart – What’s not possible? The Sprint burn down chart is calculated from the System.AuthorizedDate and not the System.ChangedDate/System.CreatedDate. So, though you can change the System.ChangedDate and System.CreatedDate to historic dates you will not be able to synthesize the sprint burn down chart. Image 1 – By changing the Created Date and Changed Date to ‘18/Oct/2012’ you would have expected the burn down to have been impacted, but it won’t be, because the sprint burn down chart uses the value of field ‘System.AuthorizedDate’ to calculate the unfinished work points. The AsOf queries that are used to calculate the unfinished work points use the value of the field ‘System.AuthorizedDate’. Image 2 – Using the above code I burned down 1 hour effort per day over 5 days from the task work item, I would have expected the sprint burn down to show a constant burn down, instead the burn down shows the effort exhausted on the 24th itself. Simply because the burn down is calculated using the ‘System.AuthorizedDate’. Now you would ask… “Can I change the value of the field System.AuthorizedDate to a historic date” Unfortunately that’s not possible! You will run into the exception ValidationException – “TF26194: The value for field ‘Authorized Date’ cannot be changed.” Conclusion - You need to be a member of the Project Collection Service account group in order to set the fields ‘System.ChangedDate’ and ‘System.CreatedDate’ to historic dates - You need to instantiate the WorkItemStore using the flag ByPassValidation - The System.ChangedDate needs to be set to a historic date at the time of work item creation. You cannot reset the ChangedDate to a date earlier than the existing ChangedDate and you cannot reset the ChangedDate to a date greater than the current date time. - The System.CreatedDate can only be reset after a work item has been created. You cannot set the CreatedDate at the time of work item creation. The CreatedDate cannot be greater than the current date. You can however reset the CreatedDate to a date earlier than the existing value. - You will not be able to synthesize the Sprint burn down chart by changing the value of System.ChangedDate and System.CreatedDate to historic dates, since the burn down chart uses AsOf queries to calculate the unfinished work points which internally uses the System.AuthorizedDate and NOT the System.ChangedDate & System.CreatedDate - System.AuthorizedDate cannot be set to a historic date using the TFS API Read other posts on using the TFS API here… Enjoy!

Read the article

How to virtualize a qnap NAS with virtualbox?

- by l1zard

I want to deploy an owncloud based cloud service at a qnap NAS. And i need to test it before we can use it on the production system. there is a french site which made it possible to download a virtualbox disk image but the documentaion about how to use this image is very poor or in french, so i can't read it. Has anybody ever been successfully virtualized a qnap NAS and could tell me exactly how this can be acclomlish?

Read the article

Change the origin coordinates in GIMP

- by user35887

In the GIMP image editor, as with many other computer graphics, the origin coordinates (0,0) are in the upper left corner of the image. I'm doing work with PDF documents which go by the mathematical origin of (0,0) being in the lower left corner. I'd like to flip the y-axis ruler in the gimp so that the origin is in the lower left corner. Is it possible to do this? Thanks!

Read the article

Simple Backup Strategy for Amazon EC2 instances / volumes?

- by minerj

You have entered Introductory Backups for Amazon EC2 EBS-backed Windows Images 010... I have been browsing my brains out to find a simple backup strategy for our single windows 2008 server running SharePoint Services. This is an EBS-backed image of one server with one data volume. I don’t need anything exotic. I only need a “daily” backup (losing a day’s worth of data is not catastrophic). We have created and saved an EBS backed AMI image (Windows 2008) we are comfortable using. We started off making backups by simply creating a new EBS AMI image. This is really simple, but the running server is put offline during the first 10 – 15 minutes of creating the image – not ideal. The standard way of creating backups would seem to be creating snapshots of volumes attached to a running instance. Again it’s pretty simple and the server remains usable during the snapshot generation. The apparent Catch-22 is that you can’t simply launch a new instance directly from a snapshot. I know how to bundle a running instance to S3 storage and then register the AMI from the S3 bucket. This does allow me to capture a backup of a running instance and, if the running instance is lost, register the AMI from the S3 bucket and launch the new AMI to recover the instance, but this seems really convoluted and it seems ridiculous to have to juggle back and forth between the AWS Console and the S3 Organizer plug-in for Firefox to get this accomplished. (Please don't mention the command line approach, this is an 010 level course). From playing around with EBS-backed images, the following approach appears to work for me (all done within the AWS Console): 1.For your backups, simply snapshot the system volume (/dev/sda1) as needed. 2.If you lose your running instance, do the following: a.Create a new volume from your last snapshot backup b.Launch another instance of your starting AMI (must be EBS-backed) c.Stop this instance. d.Detach the existing system volume from the new stopped instance and discard. e.Attach the newly created volume as system volume (/dev/sda1) to the stopped instance. f.Re-start the new instance. I have tested this out a couple of times and it seems to work for me. Question: Is there anything wrong with this approach?

Search Results

Search found 19579 results on 784 pages for 'image segmentation'.

Page 317/784 | < Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324 | Next Page >

- by Richard Knop

- by Mark

- by CryptoMonkey

- by xarfai

- by user1819709

- by coffeeaddict

- by A sw A

- by user318573

- by mrjf

- by centro

- by Scarface

- by laurent

- by user1530141

- by jsavit

- by nmgomes

- by Stephen.Walther

- by DigiMortal

- by Blake Loizides

- by JB

- by ScottGu

- by Tarun Arora

- by l1zard

- by user35887

- by minerj

< Previous Page | 313 314 315 316 317 318 319 320 321 322 323 324 | Next Page >