Search Results

Search found 25440 results on 1018 pages for 'agent based modeling'.

Page 319/1018 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

  • CPU and Motherboard clock speeds

    - by NZHammer
    I have been doing some reading about CPU clock speeds and how CPU clock speeds are calculated. After reading several articles, I have come to the understanding that your CPU clock speed is determined by: CPU clock speed = cpu multiplier x mobo clock speed A few questions came about after reading this which I cannot seem to find the answer to anywhere: If the CPU clock speed is dependent upon the mobo clock speed, then how is the clock speed of the CPU predetermined upon buying the CPU (i.e. written on the box without knowing what mobo is being used)? After installation, does the CPU adjust it's multiplier based upon the mobo clock speed to achieve advertised speeds? For example, if the CPU clocks speed is advertised at 2.4GHz and the mobo clock speed is 100MHz, will the multiplier be automatically set to 24x? Why does mobo clock speed seem to not be very important / talked about? For example, when I search on Newegg, mobo clock speed never seems to be listed. When I search enthusiast forums and overclocking forums, mobo clock speed is rarely mentioned. To me, it seems like the mobo clock speed would be pretty important. If I am understanding things correctly, a lower mobo clock speed means that you CPU must work harder to achieve advertised clock speeds. I guess that I should stop there with the questions for now, as I may be asking my questions based on incorrect assumptions. Thanks!

    Read the article

  • Unable to connect to local SQL Express (2008)

    - by Will
    I'm trying to get an installation of SQL Express 2008 working, but no matter what I do I can't connect to it with management studio. I've enabled TCP/IP for the instance. I've tried connecting with machinename\instance, .\instance, (local), etc etc etc. Nothing works, and I always get the same message. If I browse for a server, the only server listed is the local integration services, which I can connect to just fine. The SQL server service is running (SQLEXPRESS), SQL Server Agent is not (and won't, can't enable it), and SQL Server Browser is. Anyone have any suggestions on where to go next? I've tried uninstalling EVERYTHING sql and reinstalling, no change.

    Read the article

  • Temporarily Utilizing 304 Header on Apache for Crawlers

    - by Volomike
    I have a client who has a hosting arrangement with 400 customer sites all hosted through SuPHP in CGI mode on Apache. The sysop is now gone and the client is calling on me for rolling out a new PHP thing. Trouble is -- server load is very high right now and we have found that it's due to the crawlers. We had one customer in particular who complained of slow websites, and we engaged a 304 header plugin in his site against most crawlers, and his site perked right up. We'd like to lower that load by issuing a global 304 header to all the crawlers, letting human visitors through. I have a long list of user agent keywords to trap for. What's the best way to temporarily engage that global 304 header, while allowing human visitors to get right on through? I mean, I could roll out 400 .htaccess file changes, but it would be ideal to make this change in like one central Apache config and then it automatically affect all the sites at once.

    Read the article

  • How to prove that an email has been sent?

    - by bguiz
    I have a dispute on my hands in which the other party (landlord's real estate agent) dishonestly claims to not have received an email that I truly did send. My questions is, what are the ways to prove that the email was indeed sent? Thus far, the methods that I have already thought of are: Screenshot of the mail in the outbox Forwarding a copy of the original email I am aware of other things like HTTP/ SMTP headers etc that would exist as well. Are these useful for my purposes, and if so how do I extract these? The email in question was sent using Yahoo webmail ( http://au.mail.yahoo.com/ ). Edit: I am not seeking legal advice here, just technical advice as to how to gather this information.

    Read the article

  • Is one server on a vlan unnecessary?

    - by moomoochoo
    DETAILS I've been researching web hosting solutions in Japan. Based on this question one of the services available seems to be a VLAN. I've read about the advantages of such a system for a large organization, but there doesn't seem to be much information regarding smaller setups. I take that to mean that for one server it is likely to be unnecessary? My concern is that I don't know how many other servers are on the WAN, so regardless of how many servers I use a VLAN might still be a good idea. SERVER INFO One dedicated server would be used. It would not be virtualized. My Research so far Based on comments here, a VLAN would be useful for mitigating these problems. A user on another server could, either mistakenly or maliciously, assign one of your IP addresses to their server, resulting in a "duplicate IP" situation that would cause connectivity issues. A user on another server could poison the arp cache and potentially redirect traffic to snoop on communication intended to/from your server. (later in the discussion this point was said to be unrealistic.) QUESTION Is it worthwhile getting a vlan for one dedicated server? Will it be easier/the same/ harder to manage?

    Read the article

  • Windows 7: Can't see ISO file in C:\

    - by cbp
    I used DVD shrink to create an ISO file and saved it into C:\ The ISO file is visible with some programs but not with others. The file is not hidden as far as I am aware. But it cannot be seen by Windows Explorer, DVD Decrypter or a bunch of other programs. If I search for the file using Windows 7's Start Menu search tool, I can see the file and I can right click and select Properties. The Properties window appears OK, but if I try to change tabs on the property window, I receive an error message as though the file is not there. DVD Shrink can still open the file OK. I can also find the file using Agent Ransack (a file searching tool), but then I cannot open it. What gives?

    Read the article

  • How can I make Amazon SES the default method of sending mail from my server?

    - by Jake
    I'd like to start using Amazon SES for all emails from our server. We have a few freelance designers with PHP hosting, some Django/Python web apps and also some system utilities which send emails. So I'd like to have PHP's mail function, the command line mail command and our python apps all be able to use it, preferably without having to set them all up in their own way. I think what I need is to have something like Postfix running on localhost and using SES for it's delivery but I don't know how to do that. Amazon's docs state I need to setup my mail transfer agent (MTA) so that it invokes the ses-send-email.pl script. I have the script but I'm not sure how to achieve this. Am I on the right track? If so, how can I configure Postfix to use that script?

    Read the article

  • Centralized Windows/Mac Patch Management that is easy to use

    - by BiggsTRC
    I'm looking for advice on what patch management solutions you would recommend based upon your experience. I'm also looking for which ones you would not recommend based upon your experience. We have a mixed network of Windows and Mac clients. Our central servers are all Windows servers, although I have considered putting in a Mac server to better handle our Mac clients. The issue we are facing currently is that we need to maintain the patches on all of our third-party applications. Right now we use WSUS, which handles with patching of Windows and some Microsoft products but that is about it. I need something to cover the other applications, specifically things like Adobe products (Reader, Flash, Dreamweaver, etc.) Our network isn't that big (maybe 200 clients) and I don't have a person to dedicate just to patching and maintaining a patch management solution. Thus very large and complicated solutions like System Center are most likely out. I have recently been looking at Dell's Kace K1000 solution (http://www.kace.com/products/systems-management-appliance/). It seems simple and it provides a lot of tools in one package that I would like/need as well. I like the fact that it is self-contained in an appliance and that it is designed for solutions like mine. However, I'm not sure if this is the best solution. I've also looked some at Shavlik's Netchk solution (http://www.shavlik.com/netchk-protect.aspx) but I don't need an anti-virus product. However, it looks like they might have a very good patch database. My question is this: What are your thoughts on these to products? Are there better products out there? Are there issues that I'm not considering? I want something that is very good at patching a broad range of products, that is simple to use, that takes a minimal amount of management (like WSUS), and that (hopefully) works with Mac and Windows.

    Read the article

  • CheckPoint/Amazon VPC VPN tunnel working inconsistently

    - by Lee
    First time poster, so please be gentle and correct me if there's Server Fault etiquette I'm missing. We have two CheckPoint edge devices at sites A & B, independently managed, connecting to two Amazon private clouds. In both cases, the two Amazon VPCs are in the same community on the CheckPoint device. A VPN tunnel exists between the two CheckPoint devices as well. Between Sites A & B and the Amazon VPC in Northern Virigina, we are unable to keep more than one tunnel up. Both will come up, but tunnel 2 will drop an hour after initiation and will not come back up while tunnel 1 is up. We believe the 1-hour period is due to IPsec phase 2 renegotiation, but can't be sure. On our side, we see the tunnel 2 remote endpoint as not responding to phase 2 negotiation. Between Sites A & B and the Amazon VPC in Oregon, we have no issues. Both tunnels are up and fail over properly. The CheckPoint gateways are using domain-based VPNs. According to CheckPoint's advice to Amazon, this won't work. Yet, in Oregon, it does. We've pursued this with Amazon and, despite the fact it's working in Oregon, they've refused to troubleshoot with us further. Can anyone suggest anything we can do to try to get this stabilized? Going to route-based VPNs is not an option for us.

    Read the article

  • "No bootable device - insert boot disk" after restart on Ubuntu 10.04 b1 update

    - by anjanesh
    I was making an update on my Ubuntu 10.04 beta1 64-bit PC when, after reboot I get PXE-E61: Mediaa test failure, check cable PXE-M0F: Exiting Intel Boot Agent. No bootable device - insert boot disk and press any key How did my boot record disappear ? BIOS Boot Boot Menu Type : Normal Boot Device Priority : <CD/DVD-ROM Drive> <Hard Disk Drive> <Floppy Drive> <Ethernet> Hard Driver Order : No Hard Disk Drive CD/DVD ROM Drive Order : <PT-TSSTcorp CDDV> Removable Drive Order : No Removable Drive Boot to Optical Devices : <Enable> Boot to Removable Devices : <Enable> Boot to Network : <Enable> USB Boot : <Enable>

    Read the article

  • Should DKIM signing happen in the application or the MTA?

    - by thomasrutter
    I'm trying to weigh up whether DKIM signing should be done by the application sending mail (for instance, the mailing list software you're using) or at the mail transfer agent (sendmail, postfix etc). Do you know any good arguments either way? As far as I can see, doing it at the MTA, such as with dkim-milter, is a lot easier to set up. However, if anyone gets access to the server, even just a normal unprivileged account such as a web hosting client's login, they'd be able to send email using sendmail and get the full blessing of my DKIM signature. What do you think is the best solution for my situation? I'm using a Debian server with apache, postfix, php&mysql, etc.

    Read the article

  • IBM Tivoli Network Manager IP Edition - Job does not run

    - by Thorsten Niehues
    Since our network discovery takes too long I tried to split the biggest job into two parts. The two parts use the same Perl script but have a different scope. I copied a Job (Agent) doing the following: Copied the .agnt file Copied the associated perl script The problem is that one or the other job (changes randomly) does not run. The Disco Process will fail eventually. In the log of the job which does not run I see the following error message: Wed Jul 18 08:48:54 2012 Warning: Failed to send on transport layer found in file CRivObjSockClient.cc at line 1293 - Client My_MacTable_Cis is not connected to service Helper How do I fix this problem?

    Read the article

  • Can DPM 2007 back up Active Directory?

    - by rbeier
    We're installing Microsoft Data Protection Manager 2007 - we'll be using it to back up Exchange and SQL Server among other things. Does anyone know if DPM can also back up Active Directory? It sounds like the answer is "not really". You can install the DPM agent on a domain controller and make system state backups. But if your Active Directory is out of commission, there will be no way to restore the backups, since DPM depends on AD. Currently we're just using Windows Backup (ntbackup) to take system state backups on one of the DCs. Should we just continue with that? Thanks, Richard

    Read the article

  • All of ESX4 hosts not responding after rebooting vCenter server

    - by hojyokinmo
    Hello I'm constructing 5ESX+a vCenter serv. I'm testing FT on the system. Today vCenter OS (W2008) demanded system reboot. After rebooting vCenter Serv. All of ESX hosts have alert icon. end indicate "not responding" I tried to connect ESX (version 4) hosts to vCenter again. Once they came back normally, but after few seconds ,They turned red again. All of them have ping connection to vCenter serv. There are no red messages in Tusks and events. Two messages are found in Summary of Cluster ·There aren't sufficient resource for HA failover. ·Can't contact primary HA agent. I'm also not able to reset FT configuration because all of VMS aren't accessed from vCenter What should I do?

    Read the article

  • VPN authentication and MAC addresses

    - by zakk
    I have to set up a VPN (various clients connecting to a web service on a server, which is also the VPN server) and I want to make sure that no user will share his/her credentials with third parties. I know that this problem is not solvable completely, but I'd want to set up some additional security checks... Some idea I have: 1) An additional check on MAC address, but... are MAC addresses preserved thru VPN? 2) Some kind of extra identification of the client (User Agent, open ports, I want to make sure that is the very same client I authorized). 3) I would like to avoid commercial solutions like a security token... I realize it would be the perfect solution, but it will be to expensive, I suppose... Do you feel that these options are viable? Do you have any other ideas? Thanks in advance for your replies!

    Read the article

  • zabbix 2.2.1 no graphs in Web scenario

    - by Mick
    Hello for some time I have a problem with graphs in web scenarios on Zabbix 2.2.1, I put below the screen, this problem has appeared at every graph of web scenario This same scenario installed a second zabbixie that runs on my local virtual machine with zabbix. In my local machine all components of zabbix (server, frontend, agents), but in my production zabbix only zabbix frontend are separated from each other. Scenario for openerp ============================== Name: OpenERP Web Checks Application: New application: Authentication: Update interval (in sec): 60 Retries: 1 Agent: Internet Explorer 10.0 Steps: ============================== Name: OpenERP login page URL: http://openerp.test.com Post: Variables: Timeout: 15 Required string: Required status codes: 200 My zabbix server performance: Anybody have some idea how fix it ? Regards Mick

    Read the article

  • Backup Exec 2010 throwing error trying to restore Exchange mailbox

    - by Mindflux
    Error category : Resource ErrorsError : e000848c - Unable to attach to a resource. Make sure that all selected resources exist and are online, and then try again. If the server or resource no longer exists, remove it from the selection list. Edit the selection list properties, click the View Selection DFor additional information regarding this error refer to link V-79-57344-33932 I've got the Exchange agent loaded on the Exchange server. Through talking with some other folks I've added the Exchange Management Console to the Media(Backup) server. None of this has helped. I can back up Exchange all day long, however I cannot restore from it. I've followed the link given (V-79-57344-33923) which goes here and none of that has helped either. Server is running: Win Server 2008 w/ SP2 (64 bit) Backup Exec 2010 I am backing up to a Tandberg T24 tape library.

    Read the article

  • Windows 2008 Standard upgrade to Windows 2008 Enterprise failure

    - by Archit Baweja
    Sidestory, I was in the process of setting up a second Exchange 2010 server for DAG support, when I realized that my box needed Windows 2008 Enterprise edition. The box currently has Windows 2008 Standard Windows update including SP2 Exchange 2010 with CAS, HT, Mailbox roles Domain Services role File Services role. When I try to upgrade to Windows 2008 Enterprise, I initially got a "your current version of windows is more recent than the intallation media", something to that effect. My first guess was it may be SP2 related, so I uninstalled SP2, restarted and tried again. This time it gave me an error to the effect Windows could not configure one or more windows components. Please restart and try the update again. This was at the last stage of the Windows 2008 Enterprise install when it says "Completing installation". So I removed Domain Services role (including demoting it as a DC). However I get the same error again. Anyone see something like this before and have any suggestions? Also , is there a log file the windows upgrade program spits out that I can consult to see what component exactly is interfering? Update 1 Based on some googling I finally found the setup log file, and it seems that Windows setup had an issue determining the .Net 3.0 "feature" being installed or uninstalled. So based of of a win7/vista technet article I'm going to retry the upgrade after removing the .Net 3.0 feature.

    Read the article

  • Exchange 2003 resource scheduling with mixed client versions

    - by Daniel Lucas
    We run Exchange 2003, but have a mix of Outlook 2003/2007/2010 in the environment. We have three rooms that need to be configured as resources. Some observations we've made with resource scheduling/booking are: Outlook 2010 users have trouble with the native Exchange 2003 resource scheduling method and require direct booking to be configured via registry Outlook 2007 users are unable to use direct booking (is this accurate?) Outlook 2003 users can only use the native Exchange 2003 resource scheduling method (is this accurate?) Direct booking cannot be combined with the auto-accept agent What is the correct way to setup resource scheduling in a mixed environment like this? Thanks, Daniel

    Read the article

  • Firebird database corruption causes

    - by Rytis
    I am running several different Firebird versions (2.0, 2.1) on multiple entry level Windows-based servers with wildly varying hardware. The only matching thing between them is that they are running same home built application with the same database structure. Lately I've been seeing massive slowdowns on multiple servers. Turns out that database gets corrupted, so each time it breaks, I get to mend, backup and restore the database, and it all is fine for some time (1-2 weeks), and then it repeats once again. Thankfully, I haven't seen any data loss or damage... yet. The thing is that every such downtime results in lost productivity, and often quite some driving for me as some of the databases are in remote locations. I've been trying to find out what's causing the corruption, but I haven't been able to. The fact that it's running on different hardware hints that it should not be a hardware based problem. If we rule out hardware issues, I have a bad feeling that it's a bug in Firebird as I'm not doing anything fancy via SQL. Do you have any idea how to find out exactly what's causing the corruption and hopefully fix the problem?

    Read the article

  • How to get an ARM CPU clock speed in Linux?

    - by MiKy
    I have an ARM-based embedded machine based on S3C2416 board. According to the specifications I have available there should be a 533 MHz ARM9 (ARM926EJ-S according to /proc/cpuinfo), however the software running on it "feels" slow, compared to the same software on my Android phone with a 528MHz ARM CPU. /proc/cpuinfo tells me that BogoMIPS is 266.24. I know that I should not trust BogoMIPS regarding performance ("Bogo" = bogus), however I would like to get a measurement on the actual CPU speed. On x86, I could use the rdtsc instruction to get the time stamp counter, wait a second (sleep(1)), read the counter again to get an approximation on the CPU speed, and according to my experience, this value was close enough to the real CPU speed. How can I find the actual CPU speed of given ARM processor? Update I found this simple Pi calculator, which I compiled both for my Android phone and the ARM board. The results are as follows: S3C2416 # cat /proc/cpuinfo Processor : ARM926EJ-S rev 5 (v5l) BogoMIPS : 266.24 Features : swp half fastmult edsp java ... #./pi_arm 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 8.50 sec. (real time) Android # cat /proc/cpuinfo Processor : ARMv6-compatible processor rev 2 (v6l) BogoMIPS : 527.56 Features : swp half thumb fastmult edsp java # ./pi_android 10000 Calculation of PI using FFT and AGM, ver. LG1.1.2-MP1.5.2a.memsave ... 5.95 sec. (real time) So it seems that the ARM926EJ-S is slower than my Android phone, but not twice slower as I would expect by the BogoMIPS figures. I am still unsure about the clock speed of the ARM9 CPU.

    Read the article

  • hiera_include equivalent for resource types

    - by quickshiftin
    I'm using the yumrepo built-in type. I can get a basic integration to hiera working yumrepo { hiera('yumrepo::name') : metadata_expire => hiera('yumrepo::metadata_expire'), descr => hiera('yumrepo::descr'), gpgcheck => hiera('yumrepo::gpgcheck'), http_caching => hiera('yumrepo::http_caching'), baseurl => hiera('yumrepo::baseurl'), enabled => hiera('yumrepo::enabled'), } If I try to remove that definition and instead go for hiera_include('classes'), here's what I've got in the corresponding yaml backend classes: - "yumrepo" yumrepo::metadata_expire: 0 yumrepo::descr: "custom repository" yumrepo::gpgcheck: 0 yumrepo::http_caching: none yumrepo::baseurl: "http://myserver/custom-repo/$basearch" yumrepo::enabled: 1 I get this error on an agent Error 400 on SERVER: Could not find class yumrepo I guess you can't get away from some sort of minimal node declaration w/ hiera and resource types? Maybe hiera_hash is the way to go? I gave this a shot, but it produces a syntax error yumrepo { 'hnav-development': hiera_hash('yumrepo') }

    Read the article

  • Send files ending in .mp4 in Apache with HTTP 206 Partial Content

    - by Pacha
    I am using Apache as web server and the return code is always HTTP/1.1 200. I want to set some kind of handler or use a mod to return HTTP/1.1 206 when the extension of the file requested is .mp4 so it can do video seeking, my web server is already returning some headers to do seeking, but it doesn't work. Is this possible? The HTTP headers http://*hidden*/media/movies/file/1080/d3191cd83109c593ec908f3a47efa8a2.mp4 GET /media/movies/file/1080/d3191cd83109c593ec908f3a47efa8a2.mp4 HTTP/1.1 Host: *hidden* User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:31.0) Gecko/20100101 Firefox/31.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: en-US,en;q=0.5 Accept-Encoding: gzip, deflate Referer: http://vjs.zencdn.net/4.6/video-js.swf Cookie: csrftoken=zXngwwS1S827g7aAJYbHJS3ajn5BGq9M; sessionid=uj1hlj00c85aoehw0n5fye8waggb7uod Connection: keep-alive HTTP/1.1 200 OK Date: Thu, 21 Aug 2014 15:04:46 GMT Server: Apache/2.2.22 (Debian) X-Mod-H264-Streaming: version=2.2.7 Content-Length: 2148905782 Last-Modified: Wed, 13 Aug 2014 11:36:46 GMT Etag: "8e002a-8015b345-5008133ff23c4;-2146061514" Accept-Ranges: bytes Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: video/mp4

    Read the article

  • Resource Monitor (resmon) in Windows Server 2008 R2

    - by Clever Human
    In Windows Server 2008 R2's Resource Monitor, is there a way to set the scale of the various graphs to be constant values instead of variable based on data? It seems to me that the utility of a graph is to get a quick overview glance at the values those graphs are showing. So if I look at the CPU graph and the line is up near the top, I can know immediately that something is using all my CPU and go investigate what. I don't really care if the CPU is jumping between .01% and 2%. Or if the network usage monitor is up near the top, I will know that all my bandwidth is being used up, and go figure out what. But the way things are now, the graphs are meaningless because the scales constantly shift. If you look at the network usage graph in one second it might have a scale out of 100kbps, and the next second have a scale based on 1mbps! So... is there a registry key or something that will peg the scale of these graphs to logical maximums? (the graph on the right hand side of the screenshot below):

    Read the article

  • ISA Server Route Add Question

    - by Kip
    Hi All, I have a situation where I have and ISA 2006 server (on Win2k3) that has an internal and an externaly facing NIC's. All works fine but I need to add a couple of routes for the following reason: Our monitoring software is on a different network. Our Terminal server is on a different network. Currently, access to the internet, through this proxy server, from the terminal server fails. Also, monitoring of the ISA server via a remote monitor or the installed agent talking to the remote monitor (BMC) also fails. The default enterprise rule on ISA blocks the traffic as I beleive it doesn't trust / know about those networks. Here is my routing table: I need to add a couple of address, but this one being the main one: 192.168.245.137 / mask 255.255.255.192 / gateway 192.168.245.129 But I can't get it to work. Routing is not my strong point but at the moment have no one else available to help. Can you offer any assistance? Please ask if you need more info

    Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >