Search Results

Search found 15385 results on 616 pages for 'context menu'.

Page 319/616 | < Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >

• Inbound SIP calls through Cisco 881 NAT hang up after a few seconds

  - by MasterRoot24

  I've recently moved to a Cisco 881 router for my WAN link. I was previously using a Cisco Linksys WAG320N as my modem/router/WiFi AP/NAT firewall. The WAG320N is now running in bridged mode, so it's simply acting as a modem with one of it's LAN ports connected to FE4 WAN on my Cisco 881. The Cisco 881 get's a DHCP provided IP from my ISP. My LAN is part of default Vlan 1 (192.168.1.0/24). General internet connectivity is working great, I've managed to setup static NAT rules for my HTTP/HTTPS/SMTP/etc. services which are running on my LAN. I don't know whether it's worth mentioning that I've opted to use NVI NAT (ip nat enable as opposed to the traditional ip nat outside/ip nat inside) setup. My reason for this is that NVI allows NAT loopback from my LAN to the WAN IP and back in to the necessary server on the LAN. I run an Asterisk 1.8 PBX on my LAN, which connects to a SIP provider on the internet. Both inbound and outbound calls through the old setup (WAG320N providing routing/NAT) worked fine. However, since moving to the Cisco 881, inbound calls drop after around 10 seconds, whereas outbound calls work fine. The following message is logged on my Asterisk PBX: [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3641 retrans_pkt: Retransmission timeout reached on transmission [email protected] for seqno 1 (Critical Response) -- See https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions Packet timed out after 6528ms with no response [Dec 9 15:27:45] WARNING[27734]: chan_sip.c:3670 retrans_pkt: Hanging up call [email protected] - no reply to our critical packet (see https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions). (I know that this is quite a common issue - I've spend the best part of 2 days solid on this, trawling Google.) I've done as I am told and checked https://wiki.asterisk.org/wiki/display/AST/SIP+Retransmissions. Referring to the section "Other SIP requests" in the page linked above, I believe that the hangup to be caused by the ACK from my SIP provider not being passed back through NAT to Asterisk on my PBX. I tried to ascertain this by dumping the packets on my WAN interface on the 881. I managed to obtain a PCAP dump of packets in/out of my WAN interface. Here's an example of an ACK being reveived by the router from my provider: 689 21.219999 193.x.x.x 188.x.x.x SIP 502 Request: ACK sip:[email protected] | However a SIP trace on the Asterisk server show's that there are no ACK's received in response to the 200 OK from my PBX: http://pastebin.com/wwHpLPPz In the past, I have been strongly advised to disable any sort of SIP ALGs on routers and/or firewalls and the many posts regarding this issue on the internet seem to support this. However, I believe on Cisco IOS, the config command to disable SIP ALG is no ip nat service sip udp port 5060 however, this doesn't appear to help the situation. To confirm that config setting is set: Router1#show running-config | include sip no ip nat service sip udp port 5060 Another interesting twist: for a short period of time, I tried another provider. Luckily, my trial account with them is still available, so I reverted my Asterisk config back to the revision before I integrated with my current provider. I then dialled in to the DDI associated with the trial trunk and the call didn't get hung up and I didn't get the error above! To me, this points at the provider, however I know, like all providers do, will say "There's no issues with our SIP proxies - it's your firewall." I'm tempted to agree with this, as this issue was not apparent with the old WAG320N router when it was doing the NAT'ing. I'm sure you'll want to see my running-config too: ! ! Last configuration change at 15:55:07 UTC Sun Dec 9 2012 by xxx version 15.2 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec localtime show-timezone service timestamps log datetime msec localtime show-timezone no service password-encryption service sequence-numbers ! hostname Router1 ! boot-start-marker boot-end-marker ! ! security authentication failure rate 10 log security passwords min-length 6 logging buffered 4096 logging console critical enable secret 4 xxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 quit no ip source-route no ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! no ip bootp server ip domain name dmz.merlin.local ip domain list dmz.merlin.local ip domain list merlin.local ip name-server x.x.x.x ip inspect audit-trail ip inspect udp idle-time 1800 ip inspect dns-timeout 7 ip inspect tcp idle-time 14400 ip inspect name autosec_inspect ftp timeout 3600 ip inspect name autosec_inspect http timeout 3600 ip inspect name autosec_inspect rcmd timeout 3600 ip inspect name autosec_inspect realaudio timeout 3600 ip inspect name autosec_inspect smtp timeout 3600 ip inspect name autosec_inspect tftp timeout 30 ip inspect name autosec_inspect udp timeout 15 ip inspect name autosec_inspect tcp timeout 3600 ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn ! ! username xxx privilege 15 secret 4 xxx username xxx secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp no ip redirects no ip unreachables no ip proxy-arp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.1 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.2 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ! ! no ip nat service sip udp port 5060 ip nat source list 1 interface FastEthernet4 overload ip nat source static tcp x.x.x.x 80 interface FastEthernet4 80 ip nat source static tcp x.x.x.x 443 interface FastEthernet4 443 ip nat source static tcp x.x.x.x 25 interface FastEthernet4 25 ip nat source static tcp x.x.x.x 587 interface FastEthernet4 587 ip nat source static tcp x.x.x.x 143 interface FastEthernet4 143 ip nat source static tcp x.x.x.x 993 interface FastEthernet4 993 ip nat source static tcp x.x.x.x 1723 interface FastEthernet4 1723 ! ! logging trap debugging logging facility local2 access-list 1 permit 192.168.1.0 0.0.0.255 access-list 1 permit 192.168.0.0 0.0.0.255 no cdp run ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 login authentication local_auth length 0 transport output all line aux 0 exec-timeout 15 0 login authentication local_auth transport output all line vty 0 1 access-class 1 in logging synchronous login authentication local_auth length 0 transport preferred none transport input telnet transport output all line vty 2 4 access-class 1 in login authentication local_auth length 0 transport input ssh transport output all ! ! end ...and, if it's of any use, here's my Asterisk SIP config: [general] context=default ; Default context for calls allowoverlap=no ; Disable overlap dialing support. (Default is yes) udpbindaddr=0.0.0.0 ; IP address to bind UDP listen socket to (0.0.0.0 binds to all) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) tcpenable=no ; Enable server for incoming TCP connections (default is no) tcpbindaddr=0.0.0.0 ; IP address for TCP server to bind to (0.0.0.0 binds to all interfaces) ; Optionally add a port number, 192.168.1.1:5062 (default is port 5060) srvlookup=yes ; Enable DNS SRV lookups on outbound calls ; Note: Asterisk only uses the first host ; in SRV records ; Disabling DNS SRV lookups disables the ; ability to place SIP calls based on domain ; names to some other SIP users on the Internet ; Specifying a port in a SIP peer definition or ; when dialing outbound calls will supress SRV ; lookups for that peer or call. directmedia=no ; Don't allow direct RTP media between extensions (doesn't work through NAT) externhost=<MY DYNDNS HOSTNAME> ; Our external hostname to resolve to IP and be used in NAT'ed packets localnet=192.168.1.0/24 ; Define our local network so we know which packets need NAT'ing qualify=yes ; Qualify peers by default dtmfmode=rfc2833 ; Set the default DTMF mode disallow=all ; Disallow all codecs by default allow=ulaw ; Allow G.711 u-law allow=alaw ; Allow G.711 a-law ; ---------------------- ; SIP Trunk Registration ; ---------------------- ; Orbtalk register => <MY SIP PROVIDER USER NAME>:[email protected]/<MY DDI> ; Main Orbtalk number ; ---------- ; Trunks ; ---------- [orbtalk] ; Main Orbtalk trunk type=peer insecure=invite host=sipgw3.orbtalk.co.uk nat=yes username=<MY SIP PROVIDER USER NAME> defaultuser=<MY SIP PROVIDER USER NAME> fromuser=<MY SIP PROVIDER USER NAME> secret=xxx context=inbound I really don't know where to go with this. If anyone can help me find out why these calls are being dropped off, I'd be grateful if you could chime in! Please let me know if any further info is required.

  Read the article

• No tests found with test runner 'JUnit 4'

  - by lamisse

  Hello , my java test worked well from Eclipse ,I do not know I relaunch test from run menu and then have the following message: No tests found with test runner 'JUnit 4' In the .classpath file I have all jar files, and at the end have : <classpathentry exported="true" kind="con" path="org.eclipse.jdt.junit.JUNIT_CONTAINER/4"/> <classpathentry kind="output" path="bin"/> </classpath> please help!

  Read the article

• Does TestNG has runner like SpringJUnit4ClassRunner

  - by Michal Mech

  Hi, When I write tests in JUnit (in Spring context) I usualy do it like this: @RunWith(SpringJUnit4ClassRunner.class) @ContextConfiguration("classpath:testContext.xml") public class SimpleTest { @Test public void testMethod() { // execute test logic... } } How can I do the same with TestNG?

  Read the article

• Visual Studio 2008 Report Designer - can't turn on gridlines

  - by bob

  Microsoft in their infinite wisdom have seen fit to remove the useful "Draw Grid" and "Snap to Grid" checkboxes in the report properties dialog that were in VS 2005 but are not in VS 2008. I'm assuming they put that functionality elsewhere but I can't find it after going through what seems like every menu option available. Does anybody know how to turn on the gridlines?

  Read the article

• Writing Custom Menubar Extra

  - by Tristan Seifert

  How can I make a Menu Extra like the Battery Meter in Cocoa? I can make a Status Item, but they are not movable.

  Read the article

• Eclipse Intro / Welcome page

  - by Raven

  Hello, is it possible to have links on the welcome page which point to defined commands and for example, launch an dialog? I am thinking of having a welcome page, pointing out the steps what to do first, like: 1) change language (click here) 2) set up database connection (click here) 3) start working (click here) "click here" should be a link to call the actual dialog to set things up. I am using Eclipse with the command style menu. Grateful for any suggestions!

  Read the article

• What is the difference between AutomationID and AutomationProperties.Name?

  - by Lernkurve

  What is the difference between the two properties? In what context is which property used? Can you also provide a code example for each?

  Read the article

• Multiple ClickOnce applications associated with the same file type

  - by Chris Wenham

  I have multiple .Net applications that read the same file type, but when deployed with ClickOnce, the file association in Windows is made to "ClickOnce Application Deployment Support Library", which is what actually launches the program. But once the first .Net application is installed on the workstation, subsequent applications can't be selected in the "Open With" menu, and "ClickOnce Application Deployment Support Library" won't give the user a choice, either. How can I associate multiple ClickOnce-published applications to the same file type so the user can pick between them?

  Read the article

• iphone simulator shows blank screen

  - by John

  When I run iPhone simulator (SDK 3.1.4, MacOS 10.5.7) standalone or from XCode - I see only black screen. In the console I see a lot of: "invalid pixel format" "invalide context" Any ideas what happens?

  Read the article

• Asciidoc image inline macro vs. image block macro

  - by Helper Method

  I don't understand in which context an image block macro would be preferable to an image inline macro. I played around with a little test document and the only difference I could see is that I could "inline" (who would have guessed ;-)) the inline macro. So why not always use the inline version?

  Read the article

• SQL server connectivity using ConfigurationManager.ConnectionString

  - by Devashri

  I am not able to use String connectionString = ConfigurationManager.ConnectionStrings["DevBackup"].ConnectionString; I am getting error 'The name 'ConfigurationManager' does not exist in the current context' I have used namespaces using System.Data.SqlClient; using System.Data.Sql; what should be done..?? Am I missing something..??

  Read the article

• jQuery: special/custom accordion question [closed]

  - by Den

  I have to make something like an accordion, but I want it to fade while I click on a "li" of the menu. http://scripts.den-style.net/ Click on "Prodotti" and then on "Chi Siamo" ;D Can you help me?

  Read the article

• No memory window in Visual Studio 2010

  - by Fredrik Jansson

  I have VS2010 Premium RTM version on Windows 7 Ultimate x64. In the documentation they refer to the Memory 1-4 windows, supposedly under Debug-Windows-Memory. I have "Enable address-level debugging" enabled in VS (Options-Debugging). The problem is that I have no Memory menu item under Debug-Windows during debug of a c++ program. Under Debug-Windows I have only: Breakpoints Parallel Tasks Parallel Stacks Watch - Locals Call Stack Threads Have anyone else experienced this (and hopefully solved it)?

  Read the article

• php Undefined variable: article_id

  - by mmcgrail

  I keep getting this as a warning but but I don't care if its not set so how do I get rid of the warning and still achieve my goal here is the context var url_items = array("foo"); $article_id = db_escape($url_items[1]); $article = get_article($article_id); function get_article($article_id = NULL) {.....}

  Read the article

• "x" To Minimize WinForm, ContextMenu To Close WinForm?

  - by Soo

  Hi SO, I have a WinForm that I want to minimize when the "x" in the top right corner is clicked. To accomplish this, I have: private void Form_FormClosing(object sender, FormClosingEventArgs e) { e.Cancel = true; WindowState = FormWindowState.Minimized; } That's all well and good, but now I have a context menu that has the option to close the WinForm, but because of the code above, it simply minimizes the window. How can I get everything to work the way I want it to?

  Read the article

• Aletrnatives to MultiView in ASP.NET

  - by remdao

  Hi The website I'm building contains a large number of views which will be displayed on the same place but hidden or shown according to how the user navigates the menu. It gets quite messy in visual studios design view when you have a MultiView with 10 different views in it. I've already separated the content of each view in several user controls. But is there an alternative to MultiView?

  Read the article

• Is it good to use float in table less design?

  - by Brij

  Is it good to use float in table less design? What is the pros/cons of float in the context of table less cross browser compatible design? Is there any the best practices guidelines for cross browser compatible tableless design?

  Read the article

• Where is my validator?

  - by Danny Chen

  I have a validator in my page: <asp:RequiredFieldValidator ID="rfv1" runat="server" ControlToValidate="IdentifySEDSED1TxtDate" ErrorMessage="Significant Event Date 1 is missing" ValidType="SEDate">*</asp:RequiredFieldValidator> I found that in Page_Load: (below is a screen shot from the Watch Window) this.FindControl("rfv1") {Text = "*"} rfv1 The name 'rfv1' does not exist in the current context See, I can get this control with FindControl, but I can't get it using ID directly! What happens?

  Read the article

• What is round-robin scheduling?

  - by Benoit

  In a multitasking operating system context, sometimes you hear the term round-robin scheduling. What does it refer to? What other kind of scheduling is there?

  Read the article

• When using a mocking framework and MSPEC where do you set your stubs

  - by Kev Hunter

  I am relatively new to using MSpec and as I write more and more tests it becomes obvious to reduce duplication you often have to use a base class for your setup as per Rob Conery's article I am happy with using the AssertWasCalled method to verify my expectations, but where do you set up a stub's return value, I find it useful to set the context in the base class injecting my dependencies but that (I think) means that I need to set my stubs up in the Because delegate which just feels wrong. Is there a better approach I am missing?

  Read the article

• How can you do Co-routines using C#?

  - by WeNeedAnswers

  In python the yield keyword can be used in both push and pull contexts, I know how to do the pull context in c# but how would I achieve the push. I post the code I am trying to replicate in c# from python: def coroutine(func): def start(*args,**kwargs): cr = func(*args,**kwargs) cr.next() return cr return start @coroutine def grep(pattern): print "Looking for %s" % pattern try: while True: line = (yield) if pattern in line: print line, except GeneratorExit: print "Going away. Goodbye"

  Read the article

• How does Dijkstra's Algorithm and A-Star compare?

  - by KingNestor

  I was looking at what the guys in the Mario AI Competition have been doing and some of them have built some pretty neat Mario bots utilizing the A* (A-Star) Pathing Algorithm. (Video of Mario A* Bot In Action) My question is, how does A-Star compare with Dijkstra? Looking over them, they seem similar. Why would someone use one over the other? Especially in the context of pathing in games?

  Read the article

• What is the difference between "Rollback..." and "Back Out Submitted Changelist #####" in Perforce P

  - by Dave Andersen

  I want to reverse the changes from one of my checkins. In the right-click context menu of the particular changelist, there are these two options: Rollback... Back Out Submitted Changelist What is the difference between these two? In what situations should I use either one?

  Read the article

• Custom property editors do not work for request parameters in Spring MVC?

  - by dvd

  Hello, I'm trying to create a multiaction web controller using Spring annotations. This controller will be responsible for adding and removing user profiles and preparing reference data for the jsp page. @Controller public class ManageProfilesController { @InitBinder public void initBinder(WebDataBinder binder) { binder.registerCustomEditor(UserAccount.class,"account", new UserAccountPropertyEditor(userManager)); binder.registerCustomEditor(Profile.class, "profile", new ProfilePropertyEditor(profileManager)); logger.info("Editors registered"); } @RequestMapping("remove") public void up( @RequestParam("account") UserAccount account, @RequestParam("profile") Profile profile) { ... } @RequestMapping("") public ModelAndView defaultView(@RequestParam("account") UserAccount account) { logger.info("Default view handling"); ModelAndView mav = new ModelAndView(); logger.info(account.getLogin()); mav.addObject("account", account); mav.addObject("profiles", profileManager.getProfiles()); mav.setViewName(view); return mav; } ... } Here is the part of my webContext.xml file: <context:component-scan base-package="ru.mirea.rea.webapp.controllers" /> <context:annotation-config/> <bean class="org.springframework.web.servlet.handler.SimpleUrlHandlerMapping"> <property name="mappings"> <value> ... /home/users/manageProfiles=users.manageProfilesController </value> </property> </bean> <bean id="users.manageProfilesController" class="ru.mirea.rea.webapp.controllers.users.ManageProfilesController"> <property name="view" value="home\users\manageProfiles"/> </bean> <bean class="org.springframework.web.servlet.mvc.annotation.AnnotationMethodHandlerAdapter" /> However, when i open the mapped url, i get exception: java.lang.IllegalArgumentException: Cannot convert value of type [java.lang.String] to required type [ru.mirea.rea.model.UserAccount]: no matching editors or conversion strategy found I use spring 2.5.6 and plan to move to the Spring 3.0 in some not very distant future. However, according to this JIRA https://jira.springsource.org/browse/SPR-4182 it should be possible already in spring 2.5.1. The debug shows that the InitBinder method is correctly called. What am i doing wrong?

  Read the article

• Using Excel VBA to capture edit mode through checking the standard tool bar

  - by srimal

  I'm using this code to check if the standard toolbar is deactivated in the edit mode. CommandBarControl oNewMenu = Application.CommandBars("Worksheet Menu Bar").FindControl(1, 18, 1, True, True) If (IsNull(oNewMenu)) Then MsgBox "Edit mode enabled" End If but the FindControl function raise an error. Is there any conflict in the parameters?

  Read the article

< Previous Page | 315 316 317 318 319 320 321 322 323 324 325 326  | Next Page >