Search Results

Search found 14821 results on 593 pages for 'device driver'.

Page 32/593 | < Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

  • USB Device first mounted as root, then by user

    - by Petr Marek
    When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

    Read the article

  • Reverse WiFi to Broadcast connection coming from a USB device

    - by Daniel Clem
    I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

    Read the article

  • network manager says "device not managed"

    - by Daniella Glover
    I used to be able to share my network connection by editing the Auto Eth0 to share with other computers in the Ipv4 section and now I upgraded my laptop to 11.10 . Now are there no wired connections in the network manager. When I click my connections applet at the top of the tray it also says wired device not managed! when I type ifconfig -a daniella@daniella-1001HA:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:45 eth0:avahi Link encap:Ethernet HWaddr 90:e6:ba:83:d6:fc inet addr:169.254.13.40 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:45 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wlan0 Link encap:Ethernet HWaddr 00:25:d3:90:43:41 inet addr:192.168.0.6 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe90:4341/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:12881 errors:0 dropped:0 overruns:0 frame:0 TX packets:12867 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:8851081 (8.8 MB) TX bytes:2343199 (2.3 MB)

    Read the article

  • Can't install the wireless driver in HP Pavilion dv2419us

    - by maqtanim
    I've just installed Ubuntu 13.04 in an old HP Pavilion dv2419us. The problem is, Ubuntu doesn't detect the wireless card. But it works fine in Windows 7. The following command returns nothing! lspci -vvnn | grep 14e4 And the lspci output is: 00:00.1 RAM memory: NVIDIA Corporation C51 Memory Controller 0 (rev a2) 00:00.2 RAM memory: NVIDIA Corporation C51 Memory Controller 1 (rev a2) 00:00.3 RAM memory: NVIDIA Corporation C51 Memory Controller 5 (rev a2) 00:00.4 RAM memory: NVIDIA Corporation C51 Memory Controller 4 (rev a2) 00:00.5 RAM memory: NVIDIA Corporation C51 Host Bridge (rev a2) 00:00.6 RAM memory: NVIDIA Corporation C51 Memory Controller 3 (rev a2) 00:00.7 RAM memory: NVIDIA Corporation C51 Memory Controller 2 (rev a2) 00:02.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:03.0 PCI bridge: NVIDIA Corporation C51 PCI Express Bridge (rev a1) 00:05.0 VGA compatible controller: NVIDIA Corporation C51 [GeForce Go 6150] (rev a2) 00:09.0 RAM memory: NVIDIA Corporation MCP51 Host Bridge (rev a2) 00:0a.0 ISA bridge: NVIDIA Corporation MCP51 LPC Bridge (rev a3) 00:0a.1 SMBus: NVIDIA Corporation MCP51 SMBus (rev a3) 00:0a.3 Co-processor: NVIDIA Corporation MCP51 PMU (rev a3) 00:0b.0 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0b.1 USB controller: NVIDIA Corporation MCP51 USB Controller (rev a3) 00:0d.0 IDE interface: NVIDIA Corporation MCP51 IDE (rev f1) 00:0e.0 IDE interface: NVIDIA Corporation MCP51 Serial ATA Controller (rev f1) 00:10.0 PCI bridge: NVIDIA Corporation MCP51 PCI Bridge (rev a2) 00:10.1 Audio device: NVIDIA Corporation MCP51 High Definition Audio (rev a2) 00:14.0 Bridge: NVIDIA Corporation MCP51 Ethernet Controller (rev a3) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 05:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 05:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 05:09.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 05:09.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05) The command lspci -nn | grep 0280 gives no output. Any suggestion regarding this?

    Read the article

  • Developing an iOS app for a single device - licensing issue

    - by bfavaretto
    I'm developing an iOS app for a museum as a freelancer. It's a very simple video player, to be installed on a single iPad that will be part of a permanent exhibition, basically acting as a kiosk. It turns out the iPad is the ideal device for that if you're looking for a small and affordable touchscreen. The problem is: as far as I can tell, none of the Apple Developer Program options available will allow me to distribute an app like that. The relevant options are (from the link above): iOS Developer Program ($99/year) Select this program if you would like to distribute apps on the App Store as an individual, sole proprietor, company, organization, government entity or educational institution. iOS Developer Enterprise Program ($299/year) Select this program if you would like to develop proprietary apps for internal distribution within your company, organization, government entity or educational institution. The regular program requires distribution through the App Store. The Enterprise version is for internal distribution within my own organization. Neither is the case here! It seems like I'm doomed to violate Apple's terms of service (and I can think of at least two ways of doing that: jailbreaking, or changing the iPad's date so it won't know the provisioning profile expired). Is that really so, or did I get the descriptions wrong? Has anyone here been in a similar situation?

    Read the article

  • Can't update Nvidia driver and having error near the end of the installation

    - by user94843
    I had just got Ubuntu (first timer to Ubuntu so be very descriptive). I think there a problem with my Nvida update it won't let me update it. This is the name of the update in update manager NVIDIA binary xorg driver, kernel module and VDPAU library. When i attempt to install it, it starts out fine but near the end i get a window titaled package operation failed with these under the details installArchives() failed: Setting up nvidia-current (295.40-0ubuntu1) ... update-initramfs: deferring update (trigger activated) INFO:Enable nvidia-current DEBUG:Parsing /usr/share/nvidia-common/quirks/put_your_quirks_here DEBUG:Parsing /usr/share/nvidia-common/quirks/dell_latitude DEBUG:Parsing /usr/share/nvidia-common/quirks/lenovo_thinkpad DEBUG:Processing quirk Latitude E6530 DEBUG:Failure to match Gigabyte Technology Co., Ltd. with Dell Inc. DEBUG:Quirk doesn't match DEBUG:Processing quirk ThinkPad T420s DEBUG:Failure to match Gigabyte Technology Co., Ltd. with LENOVO DEBUG:Quirk doesn't match Removing old nvidia-current-295.40 DKMS files... Loading new nvidia-current-295.40 DKMS files... Error! DKMS tree already contains: nvidia-current-295.40 You cannot add the same module/version combo more than once. dpkg: error processing nvidia-current (--configure): subprocess installed post-installation script returned error exit status 3 Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-31-generic Warning: No support for locale: en_US.utf8 Errors were encountered while processing: nvidia-current Error in function: Setting up nvidia-current (295.40-0ubuntu1) ... update-initramfs: deferring update (trigger activated) INFO:Enable nvidia-current DEBUG:Parsing /usr/share/nvidia-common/quirks/put_your_quirks_here DEBUG:Parsing /usr/share/nvidia-common/quirks/dell_latitude DEBUG:Parsing /usr/share/nvidia-common/quirks/lenovo_thinkpad DEBUG:Processing quirk Latitude E6530 DEBUG:Failure to match Gigabyte Technology Co., Ltd. with Dell Inc. DEBUG:Quirk doesn't match DEBUG:Processing quirk ThinkPad T420s DEBUG:Failure to match Gigabyte Technology Co., Ltd. with LENOVO DEBUG:Quirk doesn't match Removing old nvidia-current-295.40 DKMS files... Loading new nvidia-current-295.40 DKMS files... Error! DKMS tree already contains: nvidia-current-295.40 You cannot add the same module/version combo more than once. dpkg: error processing nvidia-current (--configure): subprocess installed post-installation script returned error exit status 3 Processing triggers for bamfdaemon ... Rebuilding /usr/share/applications/bamf.index... Processing triggers for initramfs-tools ... update-initramfs: Generating /boot/initrd.img-3.2.0-31-generic Warning: No support for locale: en_US.utf8

    Read the article

  • Nvidia driver overscan issue second monitor via dvi-d cable

    - by benmichael
    Ok, I know that I have a bit of a bizarre setup, but here goes. I have an old laptop, HP Pavilion 6000. The graphics card in there is a GeForce 7150M. The monitor connection is an old 18pin. The external monitor I use is a Samsung SyncMaster 2333. Don't ask me why, but this monitor only has a dvi-d connection (yes, i have searched it). So I have the monitor plugged into the laptop. If I use any of the Nvidia propriety drivers and try to set the resolution up to 1920x1080 (the monitor's native resolution), I get a massive overscan issue. Over the years I have tried to get this to work, tinkering with my xorg.conf to death. I have also tried this on every Ubuntu since 10.04, on all the corresponding LUbuntus, and on all the Linux Mints since Lisa. Exact same issue. I have even tried it in WinDoze and it works perfectly there (although I did get the error once, but was unable to reproduce it). Using the Open Source drivers it works perfectly iff I switch off the laptop monitor (this makes no difference with the Nvidia drivers). I would have happily gone on using the Open Source drivers, except that since upgrading to LUbuntu 12.10, the Open Source drivers make my monitor completely hazy and have the same overscan issue until I (through the haze, only because I know where things are) go to the monitor settings, activate the laptop's monitor, then deactivate it, and suddenly it comes right. I have to do this every time. So I have to find a way to fix one of them, so I may as well tackle the propriety drivers, hence this overlong question. Amidst other things, I have tried the nvidia-settings, but because it is connected to an 18pin, it detects the monitor as a vga monitor and does not give me overscan correction options. I have tried custom modlines (although there are always more of those try), I have tried using xrandr, and I have tried all the FlatPanelOptions. What I have not tried is a Gentoo build, as I don't have time any more to do that installation, but up to about three years ago when I ran Gentoo exclusively I did not have this issue. Below is an link to an image with a red highlight around the portion of the screen visible to me, the numbers around it are the number of pixels which are cut off. This does seem to drift a few pixels every now and then. Thanks in advance. Nvidia driver issue image

    Read the article

  • vmdk to live cd - VMware vmxnet virtual NIC driver Kernel panic

    - by ronalchn
    Task I am trying to convert a virtual machine to a live CD. Specifically, the virtual machine I am trying to convert is the IOI 2013 Competition Environment. In this task, I am aided by a guide Converting a virtual disk image: VDI or VMDK to an ISO you can distribute. Symptoms However, after getting through all the instructions, the live CD causes a kernel panic on boot on bare metal. In particular, the screen shows: [0.737348] cdrom: Uniform CD-ROM driver Revision: 3.20 [0.737503] sr 3:0:0:0: >Attached scsi CD-ROM sr0 [0.737638] sr 3:0:0:0: >Attached scsi generic sg2 type 5 [0.737771] Freeing unused kernel memory: 756k freed [0.738093] Write protecting the kernel text: 5960k [0.738155] Write protecting the kernel read-only data: 2424k [0.738224] NX-protecting the kernel data: 4280k Loading, please wait... [0.752252] udevd[100]: starting version 175 [0.768708] VMware vmxnet3 virtual NIC driver - version 1.1.29.0-k-NAPI [0.781204] VMware PVSCSI driver - version 1.0.2.0-k [0.789555] VMware vmxnet virtual NIC driver [0.799356] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000200 [0.799356] [0.799472] Pid: 1, comm: init Tainted: G 0 3.5.0-17-generic #28-Ubuntu [0.799549] Call Trace: [0.799603] [<c15bf0ec>] panic+0x81/0x17b [0.799654] [<c104a6a5>] do_exit+0x745/0x7a0 [0.799707] [<c104a9a4>] do_group_exit+0x34/0xa0 [0.799760] [<c104aa28>] sys_exit_group+0x18/0x20 [0.799813] [<c15cff5f>] sysenter_do_call+0x12/0x28 Possible problem I suspect that the problem is the VMware vmxnet virtual NIC driver - however, I do not know how I can uninstall it, and possibly install one for a bare metal machine. If anyone knows which packages needs installing/uninstalling at the .rootfs/ chroot directory stage, please let me know. Details on procedure Do note that after importing the .ova file into Virtualbox, the virtual machine is stored as a .vmdk file already, and not a .vdi file. I would like to point out some results of the procedure followed in case of any questions. This is after extracting the filesystem from the .raw file to the .rootfs/ directory mentioned in the blog. I changed the filesystem table as mentioned in the blog, then looked at the possible "kernel optimized for virtualization". However, I found that linux-image-generic was already installed. Also, when running the command dpkg-query --showformat='${Package}\n' -W 'vmware-tools*' (or dpkg-query --showformat='${Package}\n' -W '*-virtual'), no packages were found. Thus, I did not find any virtualization specific packages. I proceeded to generate the iso following the steps in the blog, and burned it to a DVD.

    Read the article

  • SSIS - Access Denied with UNC paths - The file name is a device or contains invalid characters

    - by simonsabin
    I spent another day tearing my hair out yesterday trying to resolve an issue with SSIS packages runnning in SQLAgent (not got much left at the moment, maybe I should contact the SSIS team for a wig). My situation was that I am deploying packages to a development server, and to provide isolation I was running jobs with a proxy account that only had access to the development servers. Proxies are an awesome feature and mean that you should never have to "just run the job as sysadmin". The issue I was facing was that the job step was failing. The job step was a simple execution of the package.The following errors appeared in my log file. I always check the "Log step output in history" for a job step, this ensures you get all the output from the command that you run. I'll blog about this later. If looking at the output in sysdtslog90 then you will have an entry with datacode -1073573533 and error message File or directory "<filename>" represented by connection "<connection>" does not exist.  Not exactly helpful. If you get the output from the console then you will also get these errors. 0xC0202070 "The file name property is not valid. The file name is a device or contains invalid characters." 0xC001401E "specified in the connection was not valid." It appears this error is due to the use of a UNC path and the account runnnig the package not having access to all the folders in the path. Solution To solve this you need to ensure that the proxy account has access to ALL folders in the path you are accessing. To check this works, logon as the relevant proxy user, or run a command window as the specified user. Then try and do net use \\server\share and then do a dir for each folder in the path and check you have access. If these work and you still have the problem then you have some other problem, sorry. The following are posts on experts exchange that also discuss this,http://www.experts-exchange.com/Microsoft/Development/MS-SQL-Server/SSIS/Q_24056047.htmlhttp://www.experts-exchange.com/Microsoft/Development/MS-SQL-Server/SSIS/Q_23968903.html This blog had a post about it being a 64 bit issue. That definitely wasn't the issue for me as I was on a 32 bit server http://blogs.perkinsconsulting.com/post/64-bit-SQL-Server-2005-SSIS-and-UNC-paths-Part-2.aspx  

    Read the article

  • Cannot find root device after latest kernel upgrade

    - by DisgruntledGoat
    I'm running Ubuntu 13.04. Yesterday I tried to install updates but there was an error, and it suggested running apt-get -f install which I did. Now when I try to boot, I get an error "Gave up waiting for root device". The text is almost identical to the text shown in this and this question. However, the "built-in shell" simply doesn't work! Nothing I type shows up on the screen or does anything. I tried adding a rootdelay to grub but it just waits longer and shows the same screen. Loading the previous kernel works (although there are a few graphics glitches) but as far as I can tell, it should be booting the exact same stuff. The new kernel is 3.8.0-31-generic and the previous working one is 3.8.0-25-generic. Here is my entire /boot/grub/menu.lst file, comments removed: default 0 timeout 3 title Ubuntu 13.04, kernel 3.8.0-31-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-31-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac rootdelay=120 ro quiet splash initrd /boot/initrd.img-3.8.0-31-generic quiet title Ubuntu 13.04, kernel 3.8.0-31-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-31-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-31-generic title Ubuntu 13.04, kernel 3.8.0-25-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-25-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro quiet splash initrd /boot/initrd.img-3.8.0-25-generic quiet title Ubuntu 13.04, kernel 3.8.0-25-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-25-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-25-generic title Ubuntu 13.04, kernel 3.8.0-23-generic uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-23-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro quiet splash initrd /boot/initrd.img-3.8.0-23-generic quiet title Ubuntu 13.04, kernel 3.8.0-23-generic (recovery mode) uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/vmlinuz-3.8.0-23-generic root=UUID=c690c1e6-beb9-46e7-85c2-145cd07d44ac ro single initrd /boot/initrd.img-3.8.0-23-generic title Ubuntu 13.04, memtest86+ uuid c690c1e6-beb9-46e7-85c2-145cd07d44ac kernel /boot/memtest86+.bin quiet title -------------------------------- root title Windows Vista rootnoverify (hd0,2) savedefault makeactive chainloader +1 As you can see the UUID is the same for all kernels. Why am I getting this problem, and what can I do to fix it?

    Read the article

  • How to setup Dual Head with "radeon" driver for R770?

    - by user1709408
    I want to make dual head setup without xrandr but with Xinerama. I put "Screen 1" line into xorg.conf, but card still show identical output on DVI-2 and DVI-3 It is important to use xinerama for me (to glue three monitors), that's why i decide not to use ranrd (randr is incompatible with xinerama as i read somewhere) Here is my videocard (HD 4850 X2): lspci | grep R700 03:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] 04:00.0 Display controller: Advanced Micro Devices [AMD] nee ATI R700 [Radeon HD 4850] Here is how monitors are connected: grep "DVI" /var/log/Xorg.0.log [ 1210.002] (II) RADEON(0): Output DVI-0 using monitor section Monitor0 [ 1210.048] (II) RADEON(0): Output DVI-1 has no monitor section [ 1210.079] (II) RADEON(0): EDID for output DVI-0 [ 1210.080] (II) RADEON(0): Printing probed modes for output DVI-0 [ 1210.128] (II) RADEON(0): EDID for output DVI-1 [ 1210.128] (II) RADEON(0): Output DVI-0 connected [ 1210.128] (II) RADEON(0): Output DVI-1 disconnected [ 1210.128] (II) RADEON(0): Output DVI-0 using initial mode 1920x1200 [ 1210.160] (II) RADEON(1): Output DVI-2 using monitor section Monitor2 [ 1210.215] (II) RADEON(1): Output DVI-3 has no monitor section [ 1210.246] (II) RADEON(1): EDID for output DVI-2 [ 1210.247] (II) RADEON(1): Printing probed modes for output DVI-2 [ 1210.299] (II) RADEON(1): EDID for output DVI-3 [ 1210.300] (II) RADEON(1): Printing probed modes for output DVI-3 [ 1210.300] (II) RADEON(1): Output DVI-2 connected [ 1210.300] (II) RADEON(1): Output DVI-3 connected [ 1210.300] (II) RADEON(1): Output DVI-2 using initial mode 1920x1200 [ 1210.300] (II) RADEON(1): Output DVI-3 using initial mode 1920x1200 Here is my /etc/X11/xorg.conf Section "ServerFlags" Option "RandR" "0" Option "Xinerama" "1" EndSection Section "ServerLayout" Identifier "Three Head Layout" Screen "MyPrecious0" Screen "MyPrecious2" RightOf "MyPrecious0" Screen "MyPrecious3" LeftOf "MyPrecious0" EndSection Section "Screen" Identifier "MyPrecious0" Monitor "Monitor0" Device "Device300" EndSection Section "Screen" Identifier "MyPrecious2" Monitor "Monitor2" Device "Device400" EndSection Section "Screen" Identifier "MyPrecious3" Monitor "Monitor3" Device "Device401" EndSection Section "Device" Identifier "Device300" BusID "PCI:3:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device400" BusID "PCI:4:0:0" Screen 0 Driver "radeon" EndSection Section "Device" Identifier "Device401" BusID "PCI:4:0:0" Screen 1 Driver "radeon" EndSection Section "Monitor" Identifier "Monitor0" EndSection Section "Monitor" Identifier "Monitor2" EndSection Section "Monitor" Identifier "Monitor3" EndSection I tried to switch to vesa driver (didn't work for me) I tried to add options like Option "ZaphodHeads" "DVI-2" and Option "ZaphodHeads" "DVI-3" into sections "Device 400" and "Device 401" (this didn't help because "ZaphodHeads" option is for ranrd, and randr is disabled by decision) I tried to merge sections "Device 400" and "Device 401" into one section and add Option "ZaphodHeads" "DVI-2,DVI-3" (see comment about randr above) single section setup helps to change log line RADEON(1): Output DVI-3 has no monitor section into RADEON(1): Output DVI-3 using monitor section Monitor3 but nothing was enough to switch from screen cloning to separate screens. This problem (lack of documentation on radeon driver) is similar to these: Radeon display driver clones monitors while using Xinerama (moderators decision to close that problem was wrong) Ubuntu 12.10 multi-monitor setup isn't working The problem is solvable, because this hardware worked as three headed for me earlier with gentoo/xorg-server-1.3 Xorg -configure creates setup for the first monitor on the first GPU Please don't advise to use fglrx/aticonfig/amdcccle (this goes against my religion beliefs)

    Read the article

  • Log Debug Messages without Debug Serial on Shipped Device

    - by Kate Moss' Open Space
    Debug message is one of the ancient but useful way for problem resolving. Message is redirected to PB if KITL is enabled otherwise it goes to default debug port, usually a serial port on most of the platform but it really depends on how OEMWriteDebugString and OEMWriteDebugByte are implemented. For many reasons, we don't want to have a debug serial port, for example, we don't have enough spare serial ports and it can affect the performance. So some of the BSP designers decide to dump the messages into other media, could be a log file, shared memory or any solution that is suitable for the need. In CE 5.0 and previous, OAL and Kernel are linked into one binaries; in the other word, you can use whatever function in kernel, such as SC_CreateFileW to access filesystem in OAL, even this is strongly not recommended. But since the OAL is being a standalone executable in CE 6.0, we no longer can use this back door but only interface exported in NKGlobal which just provides enough for OAL but no more. Accessing filesystem or using sync object to communicate to other drivers or application is even not an option. Sounds like the kernel lock itself up; of course, OAL is in kernel space, you can still do whatever you want to hack into kernel, but once again, it is not only make it a dirty solution but also fragile. So isn't there an elegant solution? Let's see how a debug message print out. In private\winceos\COREOS\nk\kernel\printf.c, the OutputDebugStringW is the one for pumping out the messages; most of the code is for error handling and serialization but what really interesting is the following code piece     if (g_cInterruptsOff) {         OEMWriteDebugString ((unsigned short *)str);     } else {         g_pNKGlobal->pfnWriteDebugString ((unsigned short *)str);     }     CELOG_OutputDebugString(dwActvProcId, dwCurThId, str); It outputs the message to default debug output (is redirected to KITL when available) or OAL when needed but note that highlight part, it also invokes CELOG_OutputDebugString. Follow the thread to private\winceos\COREOS\nk\logger\CeLogInstrumentation.c, this function dump whatever input to CELOG. So whatever the debug message is we always got a clone in CELOG. General speaking, all of the debug message is logged to CELOG already, so what you need to do is using celogflush.exe with CELZONE_DEBUG zone, and then viewing the data using the by Readlog tool. Here are some information about these tools CELOG - http://msdn.microsoft.com/en-us/library/ee479818.aspx READLOG - http://msdn.microsoft.com/en-us/library/ee481220.aspx Also for advanced reader, I encourage you to dig into private\winceos\COREOS\nk\celog\celogdll, the source of CELOG.DLL and use it as a starting point to create a more lightweight debug message logger for your own device!

    Read the article

  • Acer Allionone Z5810 Touchscreen Issues 12.04

    - by Johannes
    I have an Acer Allionone Z5810, and I can't get the touchscreen to work after I install 12.04. Here is the lsusb output: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 0596:0508 MicroTouch Systems, Inc. Bus 001 Device 004: ID 04b8:0005 Seiko Epson Corp. Printer Bus 001 Device 005: ID 07ca:1336 AVerMedia Technologies, Inc. Bus 002 Device 003: ID 04ca:0058 Lite-On Technology Corp. Bus 002 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 002 Device 005: ID 04f2:b23f Chicony Electronics Co., Ltd xinput --list Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=9 [slave pointer (2)] ? ? Lite-On Technology Corp. Wireless Device id=10 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Lite-On Technology Corp. Wireless Device id=8 [slave keyboard (3)] ? USB 2.0 camera id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] My xorg.conf contains: nvidia-xconfig: X configuration file generated by nvidia-xconfig nvidia-xconfig: version 304.48 (buildmeister@swio-display x86-rhel47-04.nvidia.com) Sun Sep 9 21:31:39 PDT 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "TouchScreen" EndSection Section "Files" EndSection Section "InputDevice" Identifier "TouchScreen" Driver "microtouch" Option "Type" "finger" Option "Device" "/dev/ttyS3" Option "ScreenNo" "0" Option "MinX" "0" Option "MaxX" "16383" Option "MinY" "0" Option "MaxY" "16383" Option "SendCoreEvents" "yes" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • ubuntu 13.04 recognizes usb mobile broadband modem as ethernet connection

    - by Bence Mihalka
    When I plug in my usb mobile broadband modem (ZTE MF-667), in the network manager instead of a mobile broadband connection, I get an ethernet connection, called: Ethernet Network (ZTE WCDMA Technologies MSM), which of course doesn't work. Here is my lsusb output and the relevant parts of dmesg output: lsusb: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 001 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM dmesg: [ 195.328467] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 195.423545] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1225 [ 195.423555] usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 195.423561] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 195.423567] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 195.423572] usb 2-1.1: SerialNumber: P680A1ZTED000000 [ 195.426319] scsi7 : usb-storage 2-1.1:1.0 [ 196.425354] scsi 7:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 197.447919] usb 2-1.1: USB disconnect, device number 3 [ 197.457582] sr0: scsi3-mmc drive: 243x/186x xa/form2 cdda pop-up [ 197.457594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 197.459058] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 197.459483] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 197.759186] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 197.854543] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1405 [ 197.854556] usb 2-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=5 [ 197.854564] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 197.854572] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 197.854579] usb 2-1.1: SerialNumber: P680A1ZTED010000 [ 197.957739] scsi8 : usb-storage 2-1.1:1.2 [ 198.076554] cdc_ether 2-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 00:a0:c6:00:00:00 [ 198.076583] usbcore: registered new interface driver cdc_ether [ 198.955985] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 198.956797] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 I created the appropriate mobile broadband connection manually, but I cannot enable it in network manager, since the device is not recognized as mobile broadband. Any tips how to make it work?

    Read the article

  • Set iPhone Style Location Based Alerts On Your Android Device With Google Now

    - by Gopinath
    Location based alerts of iPhone are very useful. You can set an alert to popup as soon as you reach a specific location like “Pickup milk and eggs” when I’m near a grocery store. This feature was missing in Android for a long time, but last week at Google I/O conference Google released an update to Google Now which supports location based alerts. To setup a location based alert 1. Launch Google Now 2. Type or say add reminder 3. By default it shows time based alert interface, switch it location based by touching Location icon 4. Set reminder text, choose a location and touch Set reminder 5. Your alert is set now and as soon as you are close by the specified location, you’ll see an alert on your device. This is a nice feature and I’m using it quite often for the past couple of days.  There are couple of things missing from the current version of Google Now location based alerts– recurring alerts and ability to set alerts on leaving a specific location. It is not possible to recur location based alerts. You will be alerted only once as soon as you reach the location and it is not possible to repeat the alert next time you visit the location. Lets say you want to be reminded to say hi to friend’s parents whenever you are travelling close by their home. It does not work. The second missing feature is something basic and some how Google did not incorporate in their first iteration. Lets say you are at office now and you want to set up alert to pickup flowers when you leave office. Sounds like a simple use case for location based alerts right? But there is no way to set this type of alerts. Google Now alerts you as soon as you reach a location, but not when you leave a location. Do you have an Android that supports Google Now? If so what are your thoughts on location based alerts?

    Read the article

  • Alfa AWUS036H USB wireless adapter not recognized

    - by GFiasco
    The Alfa AWUS036H USB wireless adapter will not be recognized by my netbook (Ubuntu 14.04, Asus X201E). As I understand it, the drivers should already be built in to this version of Linux, but I tried a make/make install of the latest Realtek drivers (as mentioned on How do I install drivers for the Alfa AWUS036H USB wireless adapter?) and it didn't work. I then followed the advice of this thread (ALFA AWUS036NH driver) and did a make/make install of the most up-to-date backport of the drivers, but that didn't work. At this point I tried a series of commands from this thread (http://ubuntuforums.org/showthread.php?t=2187780) in an attempt to identify the problem, but at no point could I get the laptop to ever recognize the USB adapter. I have also troubleshot the USB cable itself, tried both the USB 2.0 and 3.0 ports on the laptop, have never received an error message regarding a need to update the firmware, and have seemingly successfully installed all manner of variation of Realtek drivers which were supposed to make the adapter work. (I also tried to delete/clean up after each install, in the hope I wasn't making things worse.) Not sure what I should do next. Please let me know if I need to post any more information. Thanks very much for your help. EDIT: Before inserting Alpha USB adapter: :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub After inserting Alpha USB adapter (USB 3.0 port, no change): :~$ lsusb Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp. Bus 001 Device 026: ID 13d3:3393 IMC Networks Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 03f0:3112 Hewlett-Packard Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Ran tail -f /var/log/syslog, inserted device, no recognition (last entry is dated 16:17:01, so an hour ago). Going to check on an Ubuntu 14.04 laptop and Windows XP desktop. I'll update after. Thanks for your help to this point.

    Read the article

  • Boot error aftter clean Ubuntu 13.04 install: [Reboot and select proper boot device]

    - by IcarusNM
    I am having the same problem as this guy where a fresh Ubuntu install completes beautifully but will not boot. I get the ASUS (?) "Reboot and select proper boot device" error, first with Xubuntu 13.10 and after finally giving up there, and Xubuntu 13.4, I am back to regular Ubuntu 13.4. ASUS motherboard Z77, Intel chipset. Standard internal SATA 500GB HD. 64-bit. All-new hardware less than 3 months old. It was running Ubuntu 12.04LTC great until I tried this upgrade. I have re-installed from scratch every which way: with LVM, without LVM; with the default partitions, with my own partitions. With ext3 or ext4. Alongside; replace; upgrade. No difference. On the last two tries, I have booted afterward from the same USB stick, downloaded and run boot-repair, and now I guess I am off to the boot-repair support email with my URLs from that. It did all kinds of cool stuff but ultimately made no difference. I never got anything like this with Ubuntu 12.04. I've now probably re-installed Ubuntu 13.04 ten times slightly different ways. I finally found how to skip the language packs, so at least that sped things up! :) This starts from the ubuntu-13.04-desktop-amd64.iso and UNetbootin as suggested on the official instructions for USB thumb drive creation from OSX. That part all works fine (booting the USB on the PC and trying Ubuntu and/or installing from there on the PC HD.) I have no CD drive on this PC, but I suppose I could get one. I would rather find some Linux install that works from USB like I've always done. After running boot-repair twice, in the ASUS BIOS I now see three different UEFI boot options in the priority list, and they are all labeled exactly the same: ubuntu (P6: WDC WD5000AAKX-00U6AA0) Then there's a non-UEFI option: P6: WDC WD5000AAKX-00U6AA0 (476940MB) And a fifth option appeared after the first boot-repair: Windows Boot Manager (P6: WDC WD5000AAKX-00U6AA0) I have tried all 5 of these, and I get exactly the same error. I have never had Windows installed on this HD. ASUS is calling it Windows Boot Manaer but I presume that's a mistaken label for whatever boot-repair did. I can boot on USB and run GParted and it looks great. The partitions all look normal. I found another case of this online with no solution posted. I can't find much about it online. Needs a Master Boot Record wipe/redo?? I'm not sure how.

    Read the article

  • How can I find out which processes on my computer are accessing the microphone?

    - by Vinayak
    After reading this interesting Lifehacker post and reading the comments on the page, one person was wondering if it would be possible to use the Physical Device Object Names of other hardware such as the microphone to find out the names of processes using that device. I tried the same approach, but so far it only seems to work for the webcam. Is there any other way I could get this to work in Process Explorer? UPDATE: The Lifehacker post was about finding out which Windows process is currently using your webcam. This is how they went about doing it: Start Device Manager (WIN+R → "devmgmt.msc" → OK) Find your webcam among the list of devices (check under Imaging Devices) Open the properties window of the device and switch to the Details tab (Right click → Properties → Details) In the dropdown menu, select Physical Device Object Name and copy the string(Right click → Copy) Download Process Explorer Make sure you have opened Process Explorer in Administrator Mode(File → Show Details for All Processes) Hit CTRL+F and enter the string you copied earlier(it should be something like \Device\000000XX) Hit the Search button and you should see a list of processes using the webcam(if there are any)

    Read the article

  • Getting java.lang.ClassNotFoundException: com.mysql.jdbc.Driver Exception

    - by Yashwant Chavan
    Hi , I am getting Following Exception while configuring the Connection Pool in Tomcat This is Context.xml <Context path="/DBTest" docBase="DBTest" debug="5" reloadable="true" crossContext="true"> <!-- maxActive: Maximum number of dB connections in pool. Make sure you configure your mysqld max_connections large enough to handle all of your db connections. Set to -1 for no limit. --> <!-- maxIdle: Maximum number of idle dB connections to retain in pool. Set to -1 for no limit. See also the DBCP documentation on this and the minEvictableIdleTimeMillis configuration parameter. --> <!-- maxWait: Maximum time to wait for a dB connection to become available in ms, in this example 10 seconds. An Exception is thrown if this timeout is exceeded. Set to -1 to wait indefinitely. --> <!-- username and password: MySQL dB username and password for dB connections --> <!-- driverClassName: Class name for the old mm.mysql JDBC driver is org.gjt.mm.mysql.Driver - we recommend using Connector/J though. Class name for the official MySQL Connector/J driver is com.mysql.jdbc.Driver. --> <!-- url: The JDBC connection url for connecting to your MySQL dB. --> <Resource name="jdbc/TestDB" auth="Container" type="javax.sql.DataSource" maxActive="100" maxIdle="30" maxWait="10000" username="root" password="password" driverClassName="com.mysql.jdbc.Driver" url="jdbc:mysql:///BUSINESS"/> </Context> This is Bean Entry <bean id="dataSource" class="org.springframework.jndi.JndiObjectFactoryBean"> <property name="jndiName" value="jdbc/TestDB"></property> <property name="resourceRef" value="true"></property> </bean> org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Co nnection; nested exception is org.apache.tomcat.dbcp.dbcp.SQLNestedException: Ca nnot load JDBC driver class 'com.mysql.jdbc.Driver' at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(Dat aSourceUtils.java:82) at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java: 382) at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:45 8) at org.springframework.jdbc.core.JdbcTemplate.query(JdbcTemplate.java:46 6) at com.businesscaliber.dao.Dao.getQueryForListMap(Dao.java:66) at com.businesscaliber.dao.MiscellaneousDao.getDefaultSucessStory(Miscel laneousDao.java:109) at com.businesscaliber.listeners.BusinessContextLoader.contextInitialize d(BusinessContextLoader.java:40) at org.apache.catalina.core.StandardContext.listenerStart(StandardContex t.java:3795) at org.apache.catalina.core.StandardContext.start(StandardContext.java:4 252) at org.apache.catalina.core.ContainerBase.addChildInternal(ContainerBase .java:760) at org.apache.catalina.core.ContainerBase.addChild(ContainerBase.java:74 0) at org.apache.catalina.core.StandardHost.addChild(StandardHost.java:544) at org.apache.catalina.startup.HostConfig.deployWAR(HostConfig.java:831) at org.apache.catalina.startup.HostConfig.deployWARs(HostConfig.java:720 ) at org.apache.catalina.startup.HostConfig.deployApps(HostConfig.java:490 ) at org.apache.catalina.startup.HostConfig.start(HostConfig.java:1150) at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java :311) at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(Lifecycl eSupport.java:120) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1022) at org.apache.catalina.core.StandardHost.start(StandardHost.java:736) at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1014) at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:443 ) at org.apache.catalina.core.StandardService.start(StandardService.java:4 48) at org.apache.catalina.core.StandardServer.start(StandardServer.java:700 ) at org.apache.catalina.startup.Catalina.start(Catalina.java:552) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl. java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces sorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:295) at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:433) Caused by: org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot load JDBC driv er class 'com.mysql.jdbc.Driver' at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDat aSource.java:1136) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSo urce.java:880) at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(D ataSourceUtils.java:113) at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(Dat aSourceUtils.java:79) ... 30 more Caused by: java.lang.ClassNotFoundException: com.mysql.jdbc.Driver at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at java.lang.ClassLoader.loadClass(ClassLoader.java:251) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319) at java.lang.Class.forName0(Native Method) at java.lang.Class.forName(Class.java:164) at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDat aSource.java:1130)

    Read the article

  • How do you test your blackberry application on the device?

    - by Kai
    This may sound very noobish, but I can't seem to get my app to my blackberry. I was trying to follow the beginning blackberry development book's guide, but maybe I just missed the point somewhere. For remote download, Is it really as simple as drop the COD and JAD files in the same folder on your server then just navigate to the URL with your device's browser? The book says it should prompt a download screen, but all I get is a page full of cryptic characters. My app is a simple slideshow. Uses no signed things and is not MDS enabled. Did I forget something? Any help would be appreciated. Thanks

    Read the article

  • Very Intermittent Orientation on Device & Simulator

    - by Michael Waterfall
    I've noticed that I'm getting very intermittent orientation on my device & the simulator. I have a modal view controller that I present, and that is the only thing in my app which supports rotation. If I launch the app in portrait without moving the device, open the modal VC and then rotate the device, it usually works. However sometimes if I open the app holding the device in landscape, then rotate to portrait, launch the VC and then rotate the device, no rotation occurs. It seems very intermittent. Sometimes if I launch the app in portrait mode and then open the VC and rotate the device, nothing happens, and until I quit and relaunch it no orientation occurs in the app. It's strange because 50% of the time it works! Whenever I launch it through Xcode and set breakpoints in shouldAutorotateToInterfaceOrientation it always works! Anyone ever had this or know what's going on?

    Read the article

  • Question about Linux Device Drivers.

    - by smwikipedia
    I have just installed the Xubuntu. My box runs quite slower than before when installed with a Win7. I am wondering if I am missing some device drivers. I can use gnome-device-manager to list my devices. In the device list view, I saw several blue question mark on the left side of devices. Based on my windows experience, the question mark should indicate the device is not properly configured. Is it the same with gnome-device-manager? And most importantly, how could I know for sure whether or not the corresponding device drivers have been installed? Many thanks.

    Read the article

  • Android - modes of connectivity, device identification and device inter-communication?

    - by MalcomTucker
    Can someone explain a couple of very simple concepts to me - I'm interested in mobile devices running android and how they are identified over networks. Some scenarios: Device is connected over WiFi - presumably the device has a standard IP address as with any host and can communicate with any other android host over TCP/IP (assuming it knows the participating device's IP? Device is connected over bluetooth - how are devices identified in this case? Device is connected over mobile operator's network - this is the one I'm interested in and confused by - is there anyway for two or more devices to discover each other and communicate via the mobile operator's network? How does a device communicate with a backend server in this scenario? In other words, how do apps and devices communicate when not connected to a WiFi network? Thanks for any advice..

    Read the article

  • How can I use a pre-populated core data DB on my device.

    - by KingAndrew
    Hi all, I have developed my app using core data. It works fine in the simulator. When I deploy it to the device the DB is empty. It is 49k where it should be 484k. Basically it is not populated. Since I don't write to the DB when the app is running I need to provide a populated DB to the App. So I copied the populated DB from the simulator to resources and then deploy. Still no luck. the populated DB is in MyApp.app and the AppDelegate is reading from the Documents directory. How do I either get it in the documents directory or get the app delegate to look in the app? Thanks in advance, Andrew

    Read the article

< Previous Page | 28 29 30 31 32 33 34 35 36 37 38 39  | Next Page >