Search Results

Search found 8925 results on 357 pages for 'customer care and billing'.

Page 320/357 | < Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >

• Home and Small to Medium Enterprise network manufacturer choice, Netgear, Linksys or D-Link ?

  - by Kedare

  (Please don't close this post, it's a serious post so... Be cool, no trolls please, I need an answer ;p) Hello, I am looking for an alternative to Cisco (too expensive for me !) for semi-pro utilization (at home but with advanced feature (I'm studying in IT)) and in small/medium enterprises. I think I will choose between LinkSys (Including Cisco Small Business), Netgear and D-Link, but I've never really used these products, that what I need is a manufacturer that make "almost" all type of networking equipment (Like Cisco but cheaper..), here are my needs : I need almost all my products to be rackable I need a good warranty (Netgear lifetime waranty rulez!) I need an "unified" network environment I made a little comparison of the characteristics that interest me after hours of search on Internet (based on result found on many websites): (Prices are based on the ldlc-pro.com french website) Hotline/Support Quality: Netgear : Not so bad Linksys : Not so bad D-Link : Poor! Most common Warranty: Netgear : Unlimited Lifetime Warranty! Linksys : Limited 3 years warranty D-Link : Limited 5 years warranty (Unlimited in US but I'm on France :(...) VPN protocols compatibles with routers on endpoint mode: Netgear : Only IPSEC :( Linksys : IPSEC, PPTP, L2TP D-Link : IPSEC, PPTP, L2TP Cheaper 8 ports Gb switch : Netgear : 30€ Linksys : 47€ D-Link : 30€ Cheaper 48 ports + 1Gb uplink(s) administrable switch : Netgear : 263€ Linksys : 630€ D-Link : 600€ Cheaper VPN router : Netgear : 100€ Linksys : 80€ D-Link : 60€ Cheaper rackable switch : Netgear : 50€ Linksys : 87€ D-Link : 50€ Cheaper rackable and administrable switch : Netgear : 120€ Linksys : 370€ D-Link : 171€ Netgear and D-Link are in the same range of price, where Linksys is more expensives. I've searched for some other criteria ( the full comparison is here, in french with shop/source links: http://forums.jeuxonline.info/showthread.php?t=1072280 ) and made a final score for each manufacturer : SCORE including IP camera sub-score: Netgear : 6.2/10 Linksys : 7.3/10 D-Link : 7.0/10 SCORE excluding IP camera sub-score: Netgear : 6.9/10 Linksys : 7.0/10 D-Link : 6.7/10 On both case, Linksys wins. So here is my little comparison, but because I've never really used these stuffs, I need your help to make a decision on witch manufacturer choose for both my personnal and corporate use. So here are the questions : What manufacturer do you recommend me (Not cisco (except Small business)) ? Why ? Have you called the call center of the customer support of one of these manufacturer ? How it was ? Did you had problems or bad experiences with these equipments ? Any other advices ? ;) Thank you !

  Read the article

• Windows Question: RunOnce/Second Boot Issues

  - by Greg

  I am attempting to create a Windows XP SP3 image that will run my application on Second Boot. Here is the intended workflow. 1) Run Image Prep Utility (I wrote) on windows to add my runonce entries and clean a few things up. 2) Reboot to ghost, make image file. 3) Package into my ISO and distribute. 4) System will be imaged by user. 5) On first boot, I have about 5 things that run, one of which includes a driver updater (I wrote) for my own specific devices. 6) One of the entries inside of HKCU/../runonce is a reg file, which adds another key to HKLM/../runonce. This is how second boot is acquired. 7) As a result of the driver updater, user is prompted to reboot. 8) My application is then launched from HKLM/../runonce on second boot. This workflow works perfectly, except for a select few legacy systems that contain devices that cause the add hardware wizard to pop up. When the add hardware wizard pops up is when I begin to see problems. It's important to note, that if I manually inspect the registry after the add hardware wizard pops up, it appears as I would expect, with all the first boot scripts having run, and it's sitting in a state I would correctly expect it to be in for a second boot scenario. The problem comes when I click next on the add hardware wizard, it seems to re-run the single entry I've added, and re-executes the runonce scripts. (only one script now as it's already executed and cleared out the initial entries). This causes my application to open as if it were a second boot, only when next is clicked on the add hardware wizard. If I click cancel, and reboot, then it also works as expected. I don't care as much about other solutions, because I could design a system that doesn't fully rely on Microsoft's registry. I simply can't find any information as to WHY this is happening. I believe this is some type of Microsoft issue that's presenting itself as a result of an overstretched image that's expected to support too many legacy platforms, but any help that can be provided would be appreciated. Thanks,

  Read the article

• Outlook Anywhere inconsistencies with authentication methods

  - by gravyface

  So I've read this question and attempted just about every other workaround I've found online. Problem seems completely illogical to me, anyways: SBS 2011, vanilla install; haven't touched anything in IIS or Exchange outside of what's been done through the checklist (brand new domain, completely new customer) except to import an existing wildcard certificate for *.example.com (which is valid, Remote Web Workplace and Outlook Web Access work fine). On the two test machines and one production machine running a mixture of Windows XP Pro, Windows 7 and Outlook 2003 through to 2010, I've had no problem saving the password after configuring Outlook Anywhere using the wrong authentication method. I repeat, I have had no issues using the wrong authentication method on these test machines; password saves the first time, no problem, can verify it exists in the credentials manager (Start Run control userpasswords2), close Outlook, reboot, go make a sammie, come back, credentials are still saved. When I say wrong, it's because I was choosing NTLM and Exchange (under Exchange Console Server Configuration Client Access) was set by default to use Basic. On two completely different machines setup by a co-worker, they had (under my guidance) used NTLM as well... except that frustratingly, Outlook would always ask for a password. One machine was Windows XP with Outlook 2010, the other was Windows 7 with Outlook 2003. When these two machines were set to use Basic -- the correct settings -- the option to save was there and now works without issue. Puzzled by how my machines could possibly work with the wrong authentication, I then went into one of them and changed the authentication method to Basic. Now here's where it gets a little crazy: if I go under Outlook and change the authentication to use the correct setting (Basic) it fails to save the password and Outlook prompts every time (without a "remember me" checkbox). I have not had a chance to change it to Basic on the other two machines to see if this is just a fluke or not, but something just isn't right here. My two hunches are either a missing/installed KB Update or perhaps a local security policy. I should add that none of the 5 test machines in the equation here have ever been joined to the domain.

  Read the article

• How to correctly partition usb flash drive and which filesystem to choose considering wear leveling?

  - by random1

  Two problems. First one: how to partition the flash drive? I shouldn't need to do this, but I'm no longer sure if my partition is properly aligned since I was forced to delete and create a new partition table after gparted complained when I tried to format the drive from FAT to ext4. The naive answer would be to say "just use default and everything is going to be alright". However if you read the following links you'll know things are not that simple: https://lwn.net/Articles/428584/ and http://linux-howto-guide.blogspot.com/2009/10/increase-usb-flash-drive-write-speed.html Then there is also the issue of cylinders, heads and sectors. Currently I get this: $sfdisk -l -uM /dev/sdd Disk /dev/sdd: 30147 cylinders, 64 heads, 32 sectors/track Warning: The partition table looks like it was made for C/H/S=*/255/63 (instead of 30147/64/32). For this listing I'll assume that geometry. Units = mebibytes of 1048576 bytes, blocks of 1024 bytes, counting from 0 Device Boot Start End MiB #blocks Id System /dev/sdd1 1 30146 30146 30869504 83 Linux $fdisk -l /dev/sdd Disk /dev/sdd: 31.6 GB, 31611420672 bytes 255 heads, 63 sectors/track, 3843 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00010c28 So from my current understanding I should align partitions at 4 MiB (currently it's at 1 MiB). But I still don't know how to set the heads and sectors properly for my device. Second problem: file system. From the benchmarks I saw ext4 provides the best performance, however there is the issue of wear leveling. How can I know that my Transcend JetFlash 700's microcontroller provides for wear leveling? Or will I just be killing my drive faster? I've seen a lot of posts on the web saying don't worry the newer drives already take care of that. But I've never seen a single piece of backed evidence of that and at some point people start mixing SSD with USB flash drives technology. The safe option would be to go for ext2, however a serious of tests that I performed showed horrible performance!!! These values are from a real scenario and not some synthetic test: 42 files: 3,429,415,284 bytes copied to flash drive original fat32: 15.1 MiB/s ext4 after new partition table: 10.2 MiB/s ext2 after new partition table: 1.9 MiB/s Please read the links that I posted above before answering. I would also be interested in answers backed up with some references because a lot is said and re-said but then it lacks facts. Thank you for the help.

  Read the article

• Globe SSL with NGINX SSL certificate problem, please help

  - by PartySoft

  Hello, I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

  Read the article

• How do I get the latest FastCGI and PHP versions to peacefully coexist on IIS 6?

  - by BHelman

  I have been going round and round trying to get any sort of PHP running on IIS 6. I somehow managed to successfully get version 5.1.4 running using the php5isapi.dll file. However, I want to upgrade a website to begin using a Content Management System. I have never dug into CMS before so I'm open to programs that are easy to use. I am currently looking into TomatoCMS and ImpressCMS - but that's beside the point. I have never done an installation with PHP before and I think I'm getting familiar with how it works. However the current situation is this. Microsoft's Web Platform Installer 2.0 installed FastCGI for me. I need to upgrade to PHP 5.3.1 for a CMS system. So I downloaded the Windows installer and let it go at it. After consulting several other blog articles, I believe I know how it is supposed to work but I am currently not having luck. THE SETUP *.php is a registered extension in IIS 6 for all websites (on Win 2k3). The application that it calls is C:\Windows\system32\inetsvr\fcgiext.dll, like it should. The fcgiext.ini config has the proper lines: [Types] php=PHP [PHP] ext=C:\program files\PHP\php-cgi.exe And the php.ini file also has the correct configs. All extensions are disabled and I changed the correct things for FastCGI. And everything is registered correctly with the PATH variable. Everything is exactly how it should be. BUT when I launch the "info.php" page () on another computer, I get the following error: FastCGI Error The FastCGI Handler was unable to process the request. Error Details: * Section [PHP] not found in config file. * Error Number: 1413 (0x80070585). * Error Description: Invalid index. HTTP Error 500 - Server Error. Internet Information Services (IIS) A quick Google search reveals that I have it all setup correctly as far as the INI's go and the mapping of the php extension. I am completely at a loss. Does anyone have any suggestions? Although the server is hosting three small websites, I don't really care what I have to do to it to get it to work.

  Read the article

• OpenBSD pf 'match in all scrub (no-df)' causes HTTPS to be unreachable on mobile network

  - by Frank ter V.

  First of all: excuse me for my poor usage of the English language. For several years I'm experiencing problems with the 'match in all scrub (no-df)' rule in pf. I can't find out what's happening here. I'll try to be clear and simple. The pf.conf has been extremely shortened for this forum posting. Here is my pf.conf: set skip on lo0 match in all scrub (no-df) block all block in quick from urpf-failed pass in on em0 proto tcp from any to 213.125.xxx.xxx port 80 synproxy state pass in on em0 proto tcp from any to 213.125.xxx.xxx port 443 synproxy state pass out on em0 from 213.125.xxx.xxx to any modulate state HTTP and HTTPS are working fine. Until the moment a customer in France (Wanadoo DSL) couldn't view HTTPS pages! I blamed his provider and did no investigation on that problem. But then... I bought an Android Samsung Galaxy SII (Vodafone) to monitor my servers. Hours after I walked out of the telephone store: no HTTPS-connections on my server! I thought my servers were down, drove back to the office very fast. But they were up. I discovered that disabling the rule match in all scrub (no-df) solves the problem. Android phone (Vodafone NL) and Wanadoo DSL FR are now OK on HTTPS. But now I don't have any scrubbing anymore. This is not what I want. Does anyone here understand what is going on? I don't. Enabling scrubbing causes HTTPS webpages not to be loaded on SOME ISP's, but not all. In systat, I strangely DO see a state created and packets received from those ISP's... Still confused. I'm using OpenBSD 5.1/amd64 and OpenBSD 5.0/i386. I have two ISP's at my office (one DSL and one cable). Affects both. This can be reproduced quite easily. I hope someone has experience with this problem. Greetings, Frank

  Read the article

• Troubleshooting an unstable internet connection

  - by Konrad Rudolph

  My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

  Read the article

• Installing MySQL-Ruby on Linux and Ruby 1.9.2

  - by Klam

  I am having an absurdly difficult time getting MySQL-Ruby to install on RedHat 4 using Ruby 1.9.2. I am behind a company proxy that prevents pretty much any package tool from connecting to external repositories so "gem install mysql" isn't going to cut it. I have tried installing the mysql-ruby gem locally but it fails with a mysterious: $gem install mysql-2.8.1.gem Building native extensions. This could take a while... ERROR: Error installing mysql-2.8.1.gem: ERROR: Failed to build gem native extension. /ns/local/apps/internal/SWS/MetricsPublisher/ruby/bin/ruby extconf.rb checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lmygcc... no checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. I have also tried building the module myself by following the included readme. The results: $ruby extconf.rb --with-mysql-include=/path_to_my_sql_headers/mysql/include/ --with-mysql-lib=/path_to_my_sql_lib/mysql/lib/ checking for mysql_query() in -lmysqlclient... no checking for main() in -lm... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lz... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lsocket... no checking for mysql_query() in -lmysqlclient... no checking for main() in -lnsl... yes checking for mysql_query() in -lmysqlclient... no checking for main() in -lmygcc... no checking for mysql_query() in -lmysqlclient... no *** extconf.rb failed *** Could not create Makefile due to some reason, probably lack of necessary libraries and/or headers. Check the mkmf.log file for more details. You may need configuration options. Does anybody have any ideas? Quite frankly, I don't even care if MySQL-Ruby specifically works, I just want ANY means of connecting to a MySQL DB through a ruby call in ruby 1.9. Thanks.

  Read the article

• Web Site Serving, Cloud-Computing, oh, my

  - by Frank

  I'm planning a software based service. To give it a bit of context (type of traffic), assume it similar to facebook in nature (with a little GitHub thrown in). I've been trying to understand my different hosting options. I've been using a shared host with GoDaddy for years just fine. I currently host a Wordpress web site there and I've not had any problems. Quite frankly, they've taken good care of me. However, the nature of a shared hosting environment is limited in nature. For example, I can't do anything but host a web site there. For example, I can not run a Mercurial server. Last time I attempted to build a web application with the intention of eventually launching it via GoDaddy, I ran in to all sorts of troubles because it was shared-hosted. Assembly issues, etc. At the time, the cost and time sank my project. (The lack of direct access was also frustrating.) (to be fair to godaddy, this was over 3 years ago) I've been looking at Rackspace or Amazon as a possible cloud solution but it seems to be just processing power and bandwidth (and an OS). From what I understand, I'd need to get Apache and MySQL Working on my own. The way cloud hosting is priced, however, seems appealing. I figure my final option might be to use a virtual private host. I think this would be more flexible than a shared-host site but less scalable than a cloud based server. So, I guess my question is what is an appropriate solution for someone who intends to build a web application service? I figure that I need to establish a hosting environment now rather than later so I can plan to effectively use the environment. I'd prefer to be fairly economical to start out with. I really can't afford to pay $999 (or even $99) while I build up the site and get the core functionality online but at the same time, I'd like to have the selected environment grow as needed. Thank you.

  Read the article

• Best Processor for MediaSmart Server?

  - by Kent Boogaart

  I'm trying to figure out what the best possible processor is that I can stick in my HP MediaSmart server. I'm clueless when it comes to correlating CPUs to motherboards. I suspect it's the socket type I care about, but I worry that there's more to it. CPU-Z gives me (excerpt): Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 1 (max 1) Number of threads 1 (max 1) Name AMD Sempron LE-1150 Codename Sparta Specification AMD Sempron(tm) Processor LE-1150 Package Socket AM2 (940) CPUID F.F.1 Extended CPUID F.7F Brand ID 1 Core Stepping DH-G1 Technology 65 nm Core Speed 1000.0 MHz Multiplier x FSB 5.0 x 200.0 MHz HT Link speed 800.0 MHz Stock frequency 2000 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size L2 cache 256 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes Max FID 10.0x Max VID 1.350 V P-State FID 0x2 - VID 0x12 (5.0x - 1.100 V) P-State FID 0xA - VID 0x0C (9.0x - 1.250 V) P-State FID 0xC - VID 0x0A (10.0x - 1.300 V) K8 Thermal sensor yes K8 Revision ID 6.0 Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Chipset ------------------------------------------------------------------------- Northbridge SiS 761GX rev. 02 Southbridge SiS 966 rev. 59 Graphic Interface AGP AGP Revision 3.0 AGP Transfer Rate 8x AGP SBA supported, enabled Memory Type DDR2 Memory Size 2048 MBytes Channels Single Memory Frequency 200.0 MHz (CPU/5) CAS# latency (CL) 5.0 RAS# to CAS# delay (tRCD) 5 RAS# Precharge (tRP) 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate (CR) 1T DMI ------------------------------------------------------------------------- DMI BIOS vendor Phoenix Technologies, LTD version R03 date 05/08/2008 DMI System Information manufacturer HP product MediaSmart Server version unknown serial CN68330DGH UUID A482007B-B0CC7593-DD11736A-407B7067 DMI Baseboard vendor Wistron model SJD4 revision A.0 serial unknown DMI System Enclosure manufacturer HP chassis type Desktop chassis serial unknown DMI Processor manufacturer AMD model AMD Sempron(tm) Processor LE-1150 clock speed 2000.0 MHz FSB speed 200.0 MHz multiplier 10.0x DMI Memory Controller correction 64-bit ECC Max module size 4096 MBytes DMI Memory Module designation A0 size 2048 MBytes (double bank) DMI Memory Module designation A1 DMI Memory Module designation A2 DMI Memory Module designation A3 DMI Port Connector designation PS/2 Mouse (internal) port type Mouse Port connector PS/2 connector PS/2 DMI Port Connector designation USB0 (external) port type USB DMI Physical Memory Array location Motherboard usage System Memory correction None max capacity 16384 MBytes max# of devices 4 DMI Memory Device designation A0 format DIMM type unknown total width 64 bits data width 64 bits size 2048 MBytes DMI Memory Device designation A1 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A2 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A3 format DIMM type unknown total width 64 bits data width 64 bits How do I figure out what options I have for an upgrade?

  Read the article

• VPN Connection causes DNS to use wrong DNS server

  - by Bryan

  I have a Windows 7 PC on our company network (which is a member of our Active Directory). Everything works fine until I open a VPN connection to a customer's site. When I do connect, I lose network access to shares on the network, including directories such as 'Application Data' that we have a folder redirection policy for. As you can imagine, this makes working on the PC very difficult, as desktop shortcuts stop working, software stops working properly due to having 'Application Data' pulled from under it. Our network is routed (10.58.5.0/24), with other local subnets existing within the scope of 10.58.0.0/16. The remote network is on 192.168.0.0/24. I've tracked the issue down to being DNS related. As soon as I open the VPN tunnel, all my DNS traffic goes via the remote network, which explains the loss of local resources, but my question is, how can I force local DNS queries to go to our local DNS servers rather than our customers? The output of ipconfig /all when not connected to the VPN is below: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled This is the output of the same command with the VPN tunnel connected: Windows IP Configuration Host Name . . . . . . . . . . . . : 7k5xy4j Primary Dns Suffix . . . . . . . : mydomain.local Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : mydomain.local PPP adapter Customer Domain: Connection-specific DNS Suffix . : customerdomain.com Description . . . . . . . . . . . : CustomerDomain Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.85(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.0.16 192.168.0.17 Primary WINS Server . . . . . . . : 192.168.0.17 NetBIOS over Tcpip. . . . . . . . : Disabled Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : F0-4D-A2-DB-3B-CA DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6 Address . . . . . : fe80::9457:c5e0:6f10:b298%10(Preferred) IPv4 Address. . . . . . . . . . . : 10.58.5.89(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 31 January 2012 15:55:47 Lease Expires . . . . . . . . . . : 10 February 2012 10:11:30 Default Gateway . . . . . . . . . : 10.58.5.1 DHCP Server . . . . . . . . . . . : 10.58.3.32 DHCPv6 IAID . . . . . . . . . . . : 250629538 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-14-AC-76-2D-F0-4D-A2-DB-3B-CA DNS Servers . . . . . . . . . . . : 10.58.3.32 10.58.3.33 NetBIOS over Tcpip. . . . . . . . : Enabled Routing table Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.58.5.1 10.58.5.89 20 10.58.5.0 255.255.255.0 On-link 10.58.5.89 276 10.58.5.89 255.255.255.255 On-link 10.58.5.89 276 10.58.5.255 255.255.255.255 On-link 10.58.5.89 276 91.194.153.42 255.255.255.255 10.58.5.1 10.58.5.89 21 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.0.0 255.255.255.0 192.168.0.95 192.168.0.85 21 192.168.0.85 255.255.255.255 On-link 192.168.0.85 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.58.5.89 276 224.0.0.0 240.0.0.0 On-link 192.168.0.85 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.58.5.89 276 255.255.255.255 255.255.255.255 On-link 192.168.0.85 276 The binding order for the interfaces is as follows: I've not configured the VPN tunnel to use the default gateway at the remote end, and network comms to nodes on both networks are fine. (i.e. I can ping any node on our network or the remote network). I've modified the PPTP connection properties to use the DNS servers 10.58.3.32 followed by 192.168.0.16, yet the query still goes to 192.168.0.16. Edit: The local resources that disappear are hosted on domain DFS roots, which might (or might not) be relevant.

  Read the article

• Flickering issue in external monitor when used with Acer Aspire One D260 netbook (Intel GMA 3150)

  - by seyenne

  I recently purchased a Acer netbook, Aspire One D260. It runs flawlessly. Yesterday I bought a Samsung 23" TFT with a native resolution of 1920x1080. According to the information found in the internet and my local computer dealer, the Intel chipset can handle the native resolution of the monitor. However, this is only partly the case. I use the VGA cable to connect, the monitor instantly switches to the native resolution and now the problem: Occasionally, especially the first 2 hours after booting up, I have a flickering all over the screen, sometimes the entire screen is shaking and spinning around like crazy. I figured out that lowering the resolution avoids the flicker but this helps only for some time. I can rule out that it's the monitor's problem since I found no issues with another notebook. Right now, I have no problems with the netbook, for about 30 minutes I didn't experience any issues... But I don't know for how long, it occurs without warning :-) I'm worried that if I would bring the netbook back to the dealer and explain my problem, after testing it on an external screen in the local shop, everything works just fine... And I won't get helped with the problem because I can't prove it. (I'm currently in Thailand and over here, customer service is nothing like back home in Germany) What can I do? Is this a driver related issue? (I installed the latest GPU driver) Is it because of the VGA cable? (But why does it work sometimes without any problems and with no issues on the other notebook) I monitored the GPU/CPU temperature, nothing changes really over time.. Can it simply be a faulty GPU and is a replacement justifiable? I'm really stressed now because for the time I'm writing, the flickering didn't occur... but for sure, soon or later it will happen again.. I forgot to mention, the problem also happens if the netbook runs on battery, unplugged. So the only hardware that is plugged is the TFT screen. ...........and here it comes again, flickering has just begun. NEED HELP! Thank you all for reading through this and giving any suggestions if possible. Cheers

  Read the article

• Windows XP machine not seeing external FAT32 partitions correctly

  - by Rob_before_edits

  About 8 months ago my Windows XP machine stopped being able to see FAT32 external drives when I plug them in... mostly. I will explain... It happens with all my FAT32 drives, whether they be unpowered external hard drives, powered external hard drives, SDHC cards plugged directly into the machine's card reader, or SDHC cards plugged in via a separate USB card reader. All of these drives/cards used to work fine on this machine. They all stopped working at about the same time. NTFS volumes are not affected. If I plug in NTFS external drives they are recognized right away. I even have one external drive with two partitions on it, one is NTFS which is recognized, the other is FAT32, which is not recognized. If I attach a FAT32 drive, then reboot, then the drive almost always becomes visible to the machine after the reboot. Sometimes I can plug in a FAT32 drive and it works right away. Not often though. I'd say I get lucky more often with SDHC cards than hard drives. I'm developing a theory that I only get lucky with hard drives if I'm running Acronis Disk Director when I plug them in, though that usually doesn't work either - I need more data here, this may be a red herring. Getting lucky with a hard drive is really rare, usually I have to reboot. When a FAT32 is recognized, either because I got lucky or because I rebooted, I can almost never safely disconnect it. It tells me "The device 'Generic volume' cannot be stopped right now. Try stopping the device again later". I can't seem to get around this. IIRC, I've tried closing every open window, and still no luck. Since I care about my data usually the only way to disconnect a FAT32 drive is to shut down the machine. As you can imagine, two reboots just to read a drive is getting pretty old... When the machine fails to see a FAT32 drive it usually comes up with the appropriate drive letter and the words "Local Disk" in Windows Explorer instead of the correct partition name. If I click on it I get "J:\ is not accessible. The parameter is incorrect." Before this problem arose I always clicked the "safely remove" button for everything, including SDHC cards where I think it's not necessary. I've known for a long time that this is the correct procedure for hard drives, so I don't think failing to do this was the cause of this problem (before someone asks :) Any answers or suggestions most welcome.

  Read the article

• Email delivery management grievances

  - by joxl

  The question I have may be more of principle than anything else, but here's my dilemma. I manage an email system for a small company (about 20 email users). We own a plain-letter .com domain name through Network Solutions. Our email service is hosted by Google Apps. Recently (Feb. 2011) we've been having customers report that they aren't getting our emails. Upon further investigation it seems that the failed emails are all to a common (well known) domain. We have not received any bounce messages for the emails. We've also contacted a few of the intended recipients, who have reported that the messages are not in their spam box; they simply did not receive anything. In these cases we re-sent the same email to an alternate address on another domain, which was successful received. One customer contacted their email provider about the issue. The provider recommended that we submit a form to be white-listed by their domain. Here's where my problem begins. I feel like this is heading down a slippery slope. Doesn't this undermine the very principle of email? If this is the appropriate action to take in these situations where will it end? In theory (following this model) it could be argued that eventually one will first need to "whitelist" (or more appropriately termed "authenticate") themselves with an email host before actually sending any messages. More to this point, what keeps the "bad" spammers from doing the same thing...? We've just gone full circle. I know avoiding anti-spam measures is a big cat-and-mouse game, but I think this is the wrong way of "patching" the problem. Email standards say that messages should not just disappear silently. I have a problem supporting a model that says "you must do < this to make sure your emails aren't ignored". I have a notion to call the provider and voice my complaint, although I have a feeling it will probably fall on deaf ears. Am I missing something here? Is this an acceptable approach to email spam problems? What should I do?

  Read the article

• Can't send email through Comcast SMTP to my domains

  - by Midnight Oil

  I am a Comcast customer with 3 computers and 3 computer users in the house. There are 2 fully updated Macs and one PC running Windows 7. We use Mail on the Macs, and Outlook on Windows 7. All computer accounts are configured to send mail through port 587 of smtp.comcast.net. I also have two personal domains registered with Network Solutions. For the sake of this discussion, call my domains myOwnDomain1.com and myOwnDomain2.com. I have email addresses at both domains. They are of the form [email protected] and [email protected]. Until recently, our email worked as expected. However, sometime between September 13, 2012 and September 19, 2012, we lost the ability to send email through Comcast's SMTP server to the email addresses at my personal domains. If we attempt to send email through Comcast's SMTP to those addresses, the email never arrives. Furthermore, the email clients give no indication of failure. The email just never arrives. The result is the same on all 3 computers and with all accounts on those computers. We can successfully send email through Comcast's SMTP from any of our accounts on any of our computers to any email address other than to my email addresses at my personal domains! However, I receive email at those domains that is not sent through smtp.comcast.net. For example, I can successfully send email from my gmail and yahoo accounts to my email addresses at my personal domains. Furthermore, I can successfully send email through smtp.myOwnDomain1.com to [email protected] and through smtp.myOwnDoman2.com to [email protected]. Comcast says the problem must be at Network Solutions. According to Network Solutions, their logs show they are not blocking reception of the email, and our IP address is not flagged as a spam source. They say the email is simply not arriving. Does anyone have any ideas why we can't send email through Comcast's SMTP server to my domains? As an odd coincidence, we recently noticed a change in Comcast's SMTP service. there is now a 5 minute delay on all outbound mail. Comcast's SMTP server seems to sit on the mail with a 5 minute timer.

  Read the article

• Small Business Server services will not start, and remote desktop and UAC are broken

  - by Stephen Jennings

  Yesterday I began setting up a server with Windows Small Business Server 2008. All I am configuring it for right now is to be a domain controller and Exchange server. I completed the initial setup of SBS then started looking through different connection options (allowing VPN versus using a TS Gateway). After I rebooted one time, I started having three not-obviously-related issues: First, I could no longer remote desktop into the computer. I ran TCPView and saw that it was no longer listening on port 3389. I checked everything in Terminal Service Configuration but everything shows the computer ought to be allowing connections. Also, when I tried to use anything that required user account control elevation, the UAC dialog never popped up and the program that was waiting just froze. If I try to run "regedit" from the Run box, for example, it never appears. When I run in safe mode which does not run with UAC, I was able to access everything. I didn't want to deal with it, so I turned off UAC and rebooted. Finally, in the Windows SBS Console, there are status indicators for Security, Updates, Backup, and Other Alerts. The first three get stuck saying "Querying". Looking in the computer alerts, I have events showing the following services stopped: Background Intelligent Transfer Service KtmRm for Distributed Transaction Coordinator Distributed Transaction Coordinator Microsoft Exchange Information Store Microsoft Exchange System Attendant Microsoft Exchange Transport Windows Remote Management Update Services Windows Update I figured I must have configured something wrong accidentally and I couldn't find anything using Google explaining what might be the case, so I just decided to format the hard drive and reinstall SBS from scratch. I did this and everything was working last night, but I just turned the machine back on and it is doing the same thing again! On my second install, I did not configure anything except the following (all from SBS Console): Connect to the Internet (set IP and router address) Turn off customer feedback. Set up internet address. Decline to use a Smart Host for email. Added one standard user account. Since this happened again and I was very careful the second time not to configure anything outside of the SBS Console, I feel like there's something else going on. Right now the machine is on an isolated network that does have internet access. My desktop is the only other machine plugged into this network. Any and all help is appreciated (before I tear my hair out!)

  Read the article

• Secret, unlogged, transparent, case-sensitive proxy in IIS6?

  - by Ian Boyd

  Does IIS have a secret, unlogged, transparent, case-sensitive proxy built into it? A file exists on the web-server: GET http://www.stackoverflow.com/javascript/ModifyQuoteArea.js HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-US User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.stackoverflow.com HTTP/1.1 200 OK Connection: Keep-Alive Content-Length: 29246 Date: Mon, 07 Mar 2011 14:20:07 GMT Content-Type: application/x-javascript ETag: "5a0a6178edacb1:1c51" Server: Microsoft-IIS/6.0 Last-Modified: Fri, 02 Tue 2010 17:03:32 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET ... Problem is that a changes made to the file will not get served, the old (i.e. February of last year) version keeps getting served: HTTP/1.1 200 OK Connection: Keep-Alive Content-Length: 29246 Date: Mon, 07 Mar 2011 14:23:07 GMT Content-Type: application/x-javascript ETag: "5a0a6178edacb1:1c51" Server: Microsoft-IIS/6.0 Last-Modified: Fri, 02 Tue 2010 17:03:32 GMT Accept-Ranges: bytes X-Powered-By: ASP.NET ... The same old file gets served, even though we've: renamed the file deleted the file restarted IIS The request for this file does not appear in the IIS logs (e.g. C:\WINNT\System32\LogFiles\W3SVC7\) And this only happens from the outside (i.e. the internet). If you issue the request locally on the server, then you will: - get the current file (file there) - 404 (file renamed) - 404 (file deleted) But if i change the case of the requested resource, i.e.: GET http://www.stackoverflow.com/javascript/MoDiFyQuOtEArEa.js HTTP/1.1 Accept: text/html, application/xhtml+xml, */* Accept-Language: en-US User-Agent: Mozilla/5.0 (compatible; MSIE 9.0; Windows NT 6.1; WOW64; Trident/5.0) Accept-Encoding: gzip, deflate Connection: Keep-Alive Host: www.stackoverflow.com Note: MoDiFyQuOtEArEa.js verses ModifyQuoteArea.js Then i do get the proper file (or get the 404 as i expect if the file is renamed or deleted). But any subsequent changes to the file will not show up until i change the case of the file i'm asking for. Checking the IIS logs all indicate that the (internet) requests are all coming the correct client on the internet (i.e. not from some intermediate proxy). Since the file doesn't exist on the hard drive anymore, i conclude that there is a proxy. The requests serviced from this proxy are not logged in the IIS logs. The requests for new files are logged, and from the client IP, not a proxy IP. The proxy is case sensitivie. This does not sound like something Microsoft, or IIS, would do: - a transparent proxy - case-sensitivie - unlogged - surviving restarts of IIS - surviving in a cache for hours i can't believe that our customer's IIS is doing these things. i'm assuming there is some other transparent proxy in front of IIS. Or, does IIS have a transparent, unlogged, case-sensitive, memory based, proxy, that caches content for at least 7 hours? (Come Monday morning, IIS is serving the correct file, unlogged).

  Read the article

• Brand new Mac Pro tower fan suddenly runs full-tilt

  - by Caffeine Coma

  My Quad-Core Mac Pro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was. At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But now that that's done, Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell. I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive. It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth. Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures? Here's a link to my temps and fan speeds. UPDATE 1: Took it to the Apple Store. They took it in the back (where it's presumably quieter) and ran a fan diagnostic; no problems were found. The guy also told me that it was "a little loud", but normal. I don't buy it. It was virtually silent the first 24 hours I was using it. They would not replace/service it in the store (grrr... that's why I went there, as directed by Apple Care) but said I could get a replacement from the online store, as it was just purchased. I think I will try that. UPDATE 2: Apple is letting me send it back for a replacement. Glad to see so many responses to this question mentioning that the MacPros are usually silent; it's not all just in my head. :-)

  Read the article

• Is Steam for Mac effectively running as superuser?

  - by godDLL

  When you download the client it does not weigh too much, and seems to do very little. Inside the app bundle there is a script that—upon inspecting the environment and deciding you're not running Linux—launches the client, which downloads the full support environment and resources. For this to happen (all of this is saved inside the bundle, the app bundle gets updated in this process) Steam wants Universal Access for Assistive Devices, and your password. Cacheable resources, preferences (like keyboard shortcuts), support files (like game hardware requirement lookup tables) live inside the bundle, not in ~/Library/{Application Support|Preferences|Cache}; games' data get dumped into ~/Documents/Steam Content. I'd describe myself as a bit OCD (which really says a lot), and I wouldn't care that much still. I'd go comb this hairy mess and find out where stuff is, when and if I need to, even if it's in an unfamiliar place; that does not actually tick me off. Well, a little bit. What makes me concerned is the way Steam needs both Access for Assistive Devices, and my password to run. The former gives it the ability to talk very intimately with running apps and the underlying system; while the latter (admin account) could very well give it and it's publishers unrestricted access to all my software, hardware and data. With publishers like Rockstar using scene NOCD cracks to publish their games on Steam, I'm not so sure I'm OK with this. I'd like more games made available for the MacOS X and all the pretty machines that run it, but this arrangement does not seem very Mac-like to me. It looks like Valve is going around system security measures and best practices, foregoing sandboxing, code signing, relatively sane structured organization; all the things that would appeal to someone who's no fun at parties at all, and will die alone, in his long dead mother's basement… wait. Right. Anyway. Can we get some input on Steam for Mac security at the end-user machine, from someone who understands how Accessibility API works, whether games distributed on Steam can read and write outside the user homefolder, collect data from other running apps, or similar?

  Read the article

• How do I get the latest FastCGI and PHP versions to peacefully coexist on IIS 6?

  - by BHelman

  I have been going round and round trying to get any sort of PHP running on IIS 6. I somehow managed to successfully get version 5.1.4 running using the php5isapi.dll file. However, I want to upgrade a website to begin using a Content Management System. I have never dug into CMS before so I'm open to programs that are easy to use. I am currently looking into TomatoCMS and ImpressCMS - but that's beside the point. I have never done an installation with PHP before and I think I'm getting familiar with how it works. However the current situation is this. Microsoft's Web Platform Installer 2.0 installed FastCGI for me. I need to upgrade to PHP 5.3.1 for a CMS system. So I downloaded the Windows installer and let it go at it. After consulting several other blog articles, I believe I know how it is supposed to work but I am currently not having luck. THE SETUP *.php is a registered extension in IIS 6 for all websites (on Win 2k3). The application that it calls is C:\Windows\system32\inetsvr\fcgiext.dll, like it should. The fcgiext.ini config has the proper lines: [Types] php=PHP [PHP] ext=C:\program files\PHP\php-cgi.exe And the php.ini file also has the correct configs. All extensions are disabled and I changed the correct things for FastCGI. And everything is registered correctly with the PATH variable. Everything is exactly how it should be. BUT when I launch the "info.php" page () on another computer, I get the following error: FastCGI Error The FastCGI Handler was unable to process the request. Error Details: * Section [PHP] not found in config file. * Error Number: 1413 (0x80070585). * Error Description: Invalid index. HTTP Error 500 - Server Error. Internet Information Services (IIS) A quick Google search reveals that I have it all setup correctly as far as the INI's go and the mapping of the php extension. I am completely at a loss. Does anyone have any suggestions? Although the server is hosting three small websites, I don't really care what I have to do to it to get it to work.

  Read the article

• Adobe Reader not loading form content

  - by wullxz

  We have an FDL file which is used to offer an online application possibility. The FDL is filled out and sent to a mailbox. When I open the received file, Adobe Reader starts, loads the document in Internet Explorer (had to change my default browser because it doesn't work in chrome - the customer uses IE as default) and displays a warning that Adobe Reader has blocked the connection to the server where the initial document is saved: I can then click on "Trust this document once" (translated by me!) or "Add this host to trusted hosts" (also translated by me!). The second option doesn't work at all. The first option works but is a little bit annoying. I looked into Adobe Readers options (Edit - "Voreinstellungen" in german / the last option - Security (advanced)) and found the possibility to add hosts, files and directories or allow Adobe Reader to use the "Trusted Websites" list from Internetoptions. When I add the website either to Trusted Websites or the trusted list in Adobe Readers options, the warning doesn't pop up but the content in the prefilled (by the applicant) input boxes of the document doesn't show up on Windows 7 but it does show up on Windows XP. This Screenshot shows the settings window described in the last paragraph. The big input box at the bottom normally holds the trusted files/directories/hosts list. System Information: Windows 7 Enterprise x64 Adobe Reader X multiple IE versions (mine is latest but there's also IE 7 or 8) How do I get Adobe Reader to load the content of the form? This behaviour can be reproduced on a PC. When opening an fdf from a command line the form fields are blank even though there is data in the fdf and the pdf is located in a mnaully entered trsuted folder. Steps to reproduce: Clean install a Windows 7 PC (or use a virtual box) Map a network drive to a shared folder with a subfolder e.g. c:\test\docs becomes m:\docs Set security permissions to allow full control to everyone Add an fdf and a matching pdf file in the subfolder Manually add m:\docs to each of the trusted folders in the trust manager registry settings Ensure that Enhanced Security is on Run a command line to open the fdf file Expected result: pdf is opened in Adobe Reader with form fields filled out with data Actual results: pdf is opened with blank fields 'Yellow bar' appears asking to add document to trusted locations It appears that Adobe Reader XI is ignoring the privileged locations entries in the registry. Adding the document via the 'yellow bar' adds the individual document, with the same folder, to the privileged locations but means that the process has to be repeated for every document that needs to be opened from the folder.

  Read the article

• How to get rid of messages addressed to not existing subdomains?

  - by user71061

  Hi! I have small problem with my sendmail server and need your little help :-) My situation is as follow: User mailboxes are placed on MS exchanege server and all mail to and from outside world are relayed trough my sendmail box. Exchange server ----- sendmail server ------ Internet My servers accept messages for one main domain (say, my.domain.com) and for few other domains (let we narrow it too just one, say my_other.domain.com). After configuring sendmail with showed bellow abbreviated sendmail.mc file, essentially everything works ok, but there is small problem. I want to reject messages addressed to not existing recipients as soon as possible (to avoid sending non delivery reports), so my sendmail server make LDAP queries to exchange server, validating every recipient address. This works well both domains but not for subdomains. Such subdomains do not exist, but someone (I'm mean those heated spamers :-) could try addresses like this: user@any_host.my.domain.com or user@any_host.my_other.domain.com and for those addresses results are as follows: Messages to user@sendmail_hostname.my.domain.com are rejected with error "Unknown user" (due to additional LDAPROUTE_DOMAIN line in my sendmail.mc file, and this is expected behaviour) Messages to user@any_other_hostname.my.domain.com are rejected with error "Relaying denied". Little strange to me, why this time the error is different, but still ok. After all message was rejected and I don't care very much what error code will be returned to sender (spamer). Messages to user@sendmail_hostname.my_other.domain.com and user@any_other_hostname.my_other.domain.com are rejected with error "Unknown user" but only when, there is no user@my_other.domain.com mailbox (on exchange server). If such mailbox exist, then all three addresses (i.e. user@my_other.domain.com, user@sendmail_hostname.my_other.domain.com and user@any_other_hostname.my_other.domain.com) will be accepted. (adding additional line LDAPROUTE_DOMAIN(my_sendmail_host.my_other.domain.com) to my sendmail.mc file don't change anything) My abbreviated sendmail.mc file is as follows (sendmail 8.14.3-5). Both domains are listed in /etc/mail/local-host-names file (FEATURE(use_cw_file) ): define(`_USE_ETC_MAIL_')dnl include(`/usr/share/sendmail/cf/m4/cf.m4')dnl OSTYPE(`debian')dnl DOMAIN(`debian-mta')dnl undefine(`confHOST_STATUS_DIRECTORY')dnl define(`confRUN_AS_USER',`smmta:smmsp')dnl FEATURE(`no_default_msa')dnl define(`confPRIVACY_FLAGS',`needmailhelo,needexpnhelo,needvrfyhelo,restrictqrun,restrictexpand,nobodyreturn,authwarnings')dnl FEATURE(`use_cw_file')dnl FEATURE(`access_db', , `skip')dnl FEATURE(`always_add_domain')dnl MASQUERADE_AS(`my.domain.com')dnl FEATURE(`allmasquerade')dnl FEATURE(`masquerade_envelope')dnl dnl define(`confLDAP_DEFAULT_SPEC',`-p 389 -h my_exchange_server.my.domain.com -b dc=my,dc=domain,dc=com')dnl dnl define(`ALIAS_FILE',`/etc/aliases,ldap:-k (&(|(objectclass=user)(objectclass=group))(proxyAddresses=smtp:%0)) -v mail')dnl FEATURE(`ldap_routing',, `ldap -1 -T<TMPF> -v mail -k proxyAddresses=SMTP:%0', `bounce')dnl LDAPROUTE_DOMAIN(`my.domain.com')dnl LDAPROUTE_DOMAIN(`my_other.domain.com ')dnl LDAPROUTE_DOMAIN(`my_sendmail_host.my.domain.com')dnl define(`confLDAP_DEFAULT_SPEC', `-p 389 -h "my_exchange_server.my.domain.com" -d "CN=sendmail,CN=Users,DC=my,DC=domain,DC=com" -M simple -P /etc/mail/ldap-secret -b "DC=my,DC=domain,DC=com"')dnl FEATURE(`nouucp',`reject')dnl undefine(`UUCP_RELAY')dnl undefine(`BITNET_RELAY')dnl define(`confTRY_NULL_MX_LIST',true)dnl define(`confDONT_PROBE_INTERFACES',true)dnl define(`MAIL_HUB',` my_exchange_server.my.domain.com.')dnl FEATURE(`stickyhost')dnl MAILER_DEFINITIONS MAILER(smtp)dnl Could someone more experienced with sendmail advice my how to reject messages to those unwanted subdomains? P.S. Mailboxes @my_other.domain.com are used only for receiving messages and never for sending.

  Read the article

• Changing default datadirectory to one on a External NAS or add external share

  - by Hagbart Celine

  So I have been searching the web for days, looking for a solution to my problem. Now my only hope are you guys. I have installed Owncloud successfully on my Windows Server 2008R2. It all runs smoothly and I can connect without problems. So first checks are OK. Now I wanted to change the default data directory from my server to a shared folder on my NAS (Synology DS1813+, DSM 5.0-4493 Update 3). Tried following: changing the directory in config.php I changed the path in the config file from : "C:\inetpub\wwwroot\myfolder\data" to "\NASIP\cloud". by doing this the owncloud server only shows: Code: Select all Daten-Verzeichnis (\192.168.2.4\Cloud\data) ist ungültig Bitte stelle sicher, dass das Daten-Verzeichnis eine Datei namens ".ocdata" im Wurzelverzeichnis enthält. I also tried coping the files that were created in the local data storage, to the share on the NAS. No Luck. Now I tried it by mapping a network drive and using that in the config.php But still no luck. I get the same message with the missing .ocdata file. Now I tried the "External Storage APP" that comes with owncloud I thought that at least I could add the share as an external storage. But this also does not work. tried UNC, Mapped Drive Name (Z:) but nothing helped. So now I'm turning to you.. Does anyone have expirience with this kind of setup? Or can you even tell me how to make it work? (default or external storgae, I don't care anymore ) Using NAS (Synology DS1813+, DSM 5.0-4493 Update 3), Owncloud 7, Windows Server 2008 R2, IIS7 I got an answer on an other forum: The second option is how it should be done: 1. Put OC in maintenance mode 2. Mount (mapping in the windows world) your NAS directly to your OS 3. Copy the local data directory to the NAS mount 4. Ensure the permission is setup to give the web user access to the NAS mount 5. Update OC config.php with the new data path 6. Disable OC maintenance mode And this seems like the right way.. Ensure the permission is setup to give the web user access to the NAS mount I guess this is where I am not sure. What user is it exactly on my Server that is making the requests to the NAS? If the user is for example "IUSR" I can just create an account on my synology NAS and give him full access to my share? (But what is IUSRs password?) I have full root ssh access to my NAS, so if you can tell me what chmod or chown I need to use on my cloud folder...

  Read the article

• Exchange 2007 and migrating only some users under a shared domain name

  - by DomoDomo

  I'm in the process of moving two law firms to hosted Exchange 2007, a service that the consulting company I work for offers. Let's call these two firms Crane Law and Poole Law. These two firms were ONE firm just six months ago, but split. So they have three email domains: Old Firm: craneandpoole.com New Firm 1: cranelaw.com New Firm 2: poolelaw.com Both Firm 1 & Firm 2 use craneandpoole.com email addresses, as for the other two domains, only people who work at the respective firm use that firm's domain name, natch. Currently these two firms are still using the same pre-split internal Exchange 2007 server, where MX records for all three domains point. Here's the problem. I'm not moving both companies at the same time. I'm moving Crane Law two weeks before Poole Law. During this two weeks, both companies need to be able to: Continue to receive emails addressed to craneandpoole.com Send emails between firms, using cranelaw.com and poolelaw.com accounts I also have a third problem: I'd like to setup all three domains in my hosting infrastructure way ahead of time, to make my own life easier What would solve all my problems would be, if there is some way I can tell Exchange 2007, even though this domain exists locally forward on the message to the outside world using public MX record as a basis for where to send it (or if I could somehow create a route for it statically that would work too). If this doesn't work, to address points #1 when I migrate Crane Law, I will delete all references locally to cranelaw.com on their current Exchange server, and setup individual forwards for each of their craneandpool.com mailboxes to forward to our hosted exchange server. This will also take care of point #2, since the cranelaw.com won't be there locally, when poolelaw.com tries to send to cranelaw.com, public MX records will be used for mail routing decisions and go to my hosted exchange. The bummer of that though is, I won't be able to setup poolelaw.com ahead of time in hosted Exchange, will have to wait to do it day of :( Sorry for the long and confusing post. Just wondering if there is a better or simpler way to do what I want? Three tier forests and that kind of thing are out, this is just a two week window where they won't be in the same place.

  Read the article

< Previous Page | 316 317 318 319 320 321 322 323 324 325 326 327  | Next Page >