Search Results

Search found 14182 results on 568 pages for 'andrew answer'.

Page 327/568 | < Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >

• How to Program AWS Spot Instances to Strategically Bid So the Auction is Never Lost Until a Competitor Beats the Maximum I'm Willing to Pay?

  - by Taal

  I believe I'm in the right section of stack exchange to ask this. If not, let me know. I only use Amazon Web Services for temporary type hosting services, so the spot instances are quite valuable to me. I would also just make an instance and start and stop it - but - that doesn't necessarily fit my bootstrapped budget sadly. Anyways, it really kills me when someone outbids me on a spot instance I have (I tend to go for the larger ones which there are fewer of available) and I get randomly kicked off. I know or at least I believe there is a way to program in something somehow to dynamically change your bidding price to beat a potential competitor's if their's is higher than yours. Now, I previously believed Amazon would just charge me for the highest price right above the next lowest competitor automatically (eliminating the need for this) - so if I bid too high, then I only pay what I would of needed to in order to win and keep the auction. Essentially, I thought my bid price was my max bid price. Apparently, according to my bills and several experiments I've done - this is not the case. They charge me for whatever I bid even when I know there is no one else around to counter bid me. I needed to clarify that, but let me get back to the main point: Let's say I'm bidding $0.50, competitor comes in and bids 0.55 cents. I get kicked off. I want to have it to where I'd set a maximum I'm willing to pay (let's say $1.00 here), and then when competitor comes in and tries to bid $.55, my bid is dynamically adjusted to beat his at $0.56 up until he breaks my $1.00 threshold. I've been reading the guides and although they are more or less straightforward, I feel like they leave a few holes in them that end up confusing me. Like, for instance, where do I input said command or when do I do it? Maybe I'm just tech illiterate and need help deciphering these guides. A good start for someone willing to answer/help me decipher this problem would be here: http://docs.aws.amazon.com/AWSEC2/latest/UserGuide/spot-as-update-bid.html

  Read the article

• Can I share data between two users in an ASP.NET Application?

  - by Dave

  I have an issue with Roles.IsUserInRole function. It take hell amount of time to just check if the logged-in user is in particular role(typ 3-9 sec). I searched to find a solution and arrived on this but I am not sure If I have fully grasped it. What I got from the above, A new derived class is created. Inside that class, there is a list which retrieves all user at once. The next time you check IsUserInRole, you do not use the actual IsUserInRole method but rather use the one you overrode in your class. Is this the correct description? Am I on track? My question is, can data be share between two different users in ASP.NET application? If yes, will the shared data exist only if there is at least one user logged in. If all users logs out, that shared data is destroyed? My point is this data will be created only one time whenever a user logs in. For all subsequent users they can use this data and check their roles against the list? I need a detailed answer. My application has users and different roles. We are using ASP.NET roles.

  Read the article

• Need to include Calendar and Email in own CRM system. Whose?

  - by PurplePilot

  I am writing a web based application that needs to have some elements of CRM in it but I cannot use an of-the-shelf CRM to do what I want. (Honestly we have been through it all and it will not work). Now while Tasks, Calls, Meetings and Notes are straightforward the idea of reinventing Mail and Calendars seems a waste of time and effort and also unproductive as most users already have their own and it simply adds to the complexity of my application and hacks users off. My thoughts are going around using Outlook and or GMail/iCal and or Mac Mail/iCal and or Thunderbird and importing the relevant data or if possible integrating it into the application. Any thoughts? Anyone got any experience of this can point me in a few directions. N.B. Not looking for an answer as too complex just some pointers and thoughts. Thanks. p.s. We did look at Sugar CRM as the basis for our project and it is useful to get best practice from but as I say it was not useable due to how we are structuring our software, not Sugar's fault.

  Read the article

• Scaling sprite velocity / co-ordinatesin Android

  - by user22241

  I'm trying to find the answer to a question that I've had for a long time, but am having trouble finding it! I hope someone can help :-) I'm trying to find information on how to scale sprite velocity / movement / co-ordinates. What I mean by this is how do I get a sprite to move at the same speed relative to the screen size / DPI so that it takes the same amount of real-time to get from one side of the screen to the other? All of the posts pertaining to sprite scaling that I can find on the various forums relate to the size of the sprite, but this part of it I'm OK with so far, it's just that when I move a sprite, it kind of gets there at different speed depending on the dpi / resolution of the device. I hope I'm making sense. This is the code I have so far, instead of using explicit amounts, like 1, I'm using something like the following: platSpeedFloat= (1 * (dpi/160)); //Use '1' so on an MDPI screen, the sprite will move by 1 physical pixel Then basically what I'm doing is something like this: (all varialble previously declared) platSpeedSave+=platSpeedFloat; //Add the platSpeedFloat value to the current platSpeedSave value platSpeed=(int) platSpeedSave; //Cast to int so it can be checked in the following statement if (platSpeed==platSpeedSave) //Check the casted int value to float value stored previoiusly {floorY=floorY-platSpeed; //If they match then change the Y value platSpeedSave=0;} //Reset Would be grateful if someone could assists - hope I'm making sense. The above doesn't seems to work the sprite moves 'faster' on lower DPI screens. Thanks

  Read the article

• model association or controller?

  - by andybritton

  I'm trying to create a rails app that allows users to submit information about their pets. I've come to a point where my knowledge is limited and I don't know enough about what/how this could be done so I'm hoping this will be relatively easy to answer. At the moment I have a model called Pet, this model currently stores basic information like name, picture etc but it also holds more specific data like type, breed, date of birth etc. What I would like to be able to do is create a page that can match various records without having to be manually categorized if that makes sense so a users pet could be matched to other pets with the same breed, age etc. I've read about nested models as I understand this information could be submitted to 2 models in one form but I am not sure whether this could be done directly in a separate controller which would only be visible to users with pets in these matched "groups" if that makes sense. So in essence is it best practice to use 1 table to store all the information and just use a controller to match pets based on rows having the same values or would it be far simpler to have a form with a nested model and link 2 tables together? The main feature needs to be matching without a user having to create a group or categorize pets so the second model would need to add id's to an array instead of just creating more and more rows.

  Read the article

• which technology or strategy a new / inexperienced freelancer should use to earn profit? [closed]

  - by w3softdev

  this question has re-posted by me in the following group if you find suitable to answer this question then please click on the link attached here or copy paste this in your browser.. http://answers.onstartups.com/questions/32767/which-technology-or-strategy-a-new-inexperienced-freelancer-should-use-to-earn Well it is my very first Question in this section and i really don't know whether my query relate to this section or not. anyway i have some awkward query. (however, it is like a bit story but i guess it is necessary to know some background knowledge of me.) Actually I m fresh recent grad who has just started his freelancing work. In due course i have got a project to develop website for a middle scale business (travel agent). As I don't trust on my client whether he will pay to me in full or not after the completion of website, i want to use cheaper and efficient technology so that how much he would pay I could got at least few units of % of profit. As i have learnt ASP.NET and when I inquired about the expense in Hosting of my website i got the recommendation to develop my web app using the combination PHP and MYSQL instead the asp.net + ms sql. And the problem is I don't know PHP. should I learn PHP and or work in what i m comfortable with and should try to cover whole deserved money. (as it is my first project so i m also advised that i may got some loss in starting but contrary to this i don't want to go in loss and want to earn appropriate profit)

  Read the article

• Matching users based on a series of questions

  - by SeanWM

  I'm trying to figure out a way to match users based on specific personality traits. Each trait will have its own category. I figure in my user table I'll add a column for each category: id name cat1 cat2 cat3 1 Sean ? ? ? 2 Other ? ? ? Let's say I ask each user 3 questions in each category. For each question, you can answer one of the following: No, Maybe, Yes How would I calculate one number based off the answers in those 3 questions that would hold a value I can compare other users to? I was thinking having some sort of weight. Like: No -> 0 Maybe -> 1 Yes -> 2 Then doing some sort of meaningful calculation. I want to end up with something like this so I can query the users and find who matches close: id name cat1 cat2 cat3 1 Sean 4 5 1 2 Other 1 2 5 In the situation above, the users don't really match. I'd want to match with someone with a +1 or -1 of my score in each category. I'm not a math guy so I'm just looking for some ideas to get me started.

  Read the article

• Don't speak to the DBA while he/she is doing the job?!

  - by Uri Dimant

  Our DBA was very busy today, he helped out our developers to write efficient code,explained to the programmer how to launch the old DTS package on SQL Server 2005 and etc. You know how it is, someone comes in and asking the question and you answer the question at the same time you are busy to do something. So  today answering one of such questions he deleted by mistake very ctitical database. Fortunately, we had zero data loss,thanks to our backup/recovery strategy. I think that is acceptable to say that you are busy right now ,please ask the question later on, what do you think? How do you respond if someone asks you a queston while you are doing something on the server/database and etc.?   Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• When uninstalling all GRUB packages for EC2 AMI build script, how do I bypass prompting?

  - by Skaperen

  When I try to uninstall all GRUB packages from the cloud-image version of Ubuntu I use in AWS EC2, I get an interactive prompt. I need put this all in a script under automation, so prompts need to be avoided. I have searched for means to bypass this, and all of the features like debconf apply to prompts for config settings which can be provided in advance. But the prompt I am getting is not a config prompt. It would be in the class of "are you sure" prompts. I tried --force-all and that did not work. The prompt is referring to the files in /boot/grub so I tried by first doing "rm -fr /boot/grub" (they do all go away) and it still prompts to ask me if I want to delete them even though there is nothing to delete. The wording of the prompt is: Do you want to have all GRUB 2 files removed from /boot/grub? This will make the system unbootable unless another boot loader is installed. Remove GRUB 2 from /boot/grub? <YES> <NO> The command I am doing is: dpkg --purge grub-common grub-gfxpayload-lists grub-legacy-ec2 grub-pc grub-pc-bin grub2-common How can I get past this prompt without trying to encapsulate it in something that tries to answer (which itself has issues when there is no TTY so I want to avoid that) ?

  Read the article

• Software Architecture: How to divide work to a network of computers?

  - by Morpork

  Imagine a scenario as follows: Lets say you have a central computer which generates a lot of data. This data must go through some processing, which unfortunately takes longer than to generate. In order for the processing to catch up with real time, we plug in more slave computers. Further, we must take into account the possibility of slaves dropping out of the network mid-job as well as additional slaves being added. The central computer should ensure that all jobs are finished to its satisfaction, and that jobs dropped by a slave are retasked to another. The main question is: What approach should I use to achieve this? But perhaps the following would help me arrive at an answer: Is there a name or design pattern to what I am trying to do? What domain of knowledge do I need to achieve the goal of getting these computers to talk to each other? (eg. will a database, which I have some knowledge of, be enough or will this involve sockets, which I have yet to have knowledge of?) Are there any examples of such a system? The main question is a bit general so it would be good to have a starting point/reference point. Note I am assuming constraints of c++ and windows so solutions pointing in that direction would be appreciated.

  Read the article

• Cannot connect to Internet via Wifi

  - by lvogel

  I have a laptop that's currently configured as a dual-boot. The problem: I cannot connect to the Internet in the home wireless network through Ubuntu in the apartment where I currently live. The strange part: I can connect to it just fine through Windows (as right now), and I can use the Internet through Ubuntu on this computer with all the other wireless networks I have tried. The problem is only with this particular combination. The only possible explanations I can think of are either that this network is WPS, or that it's a driver problem--Vodafone router. The router 'sees' the computer--and it says it's connected; however, I keep getting prompted for a password, and I enter the key that works with Windows, but in Ubuntu it just keeps asking for it repeatedly, and I can't access the Internet. I don't have an ethernet cable at the moment, but if someone would be so kind as to ask me questions I will gladly answer, and if you have suggestions, I will do them--the only thing is, I am subletting this apartment from someone who is away on vacation, so I don't want to screw with the router settings unless I know what I'm doing! - I do not have Wicd - Yes, I have the router's information (key works in Windows) - Feedback of lshw says that the wireless card is Ultimate N Wifi Link 5300, vendor: Intel Corporation, physical id: 0 ,etc. The first two commands I was told to try work OK, but when I typed sudo ifconfig wlan0 essid ..... I got back 'essid: Unknown host' Would my question be better on the Ubuntu forums than here on AU?

  Read the article

• Ubuntu 12.10 Quantal Quetzal and AMD 12.11 Beta Driver

  - by White

  I'm using a Quantal AMDx64 install and a XFX Radeon HD5850 video card. I first enabled restricted drivers through additional drivers, but it resulted in breaking Unity and Compiz (I can only see my wallpaper and shortcuts. But the terminal still works and Nautilus too, however, without Close/Maximize/Minimize and slower). Then I uninstalled it and everything went back to normal. Then I installed it via terminal (12.10 version), and the result was the same. Then I downloaded it via ATI's web site (12.11 beta) and installed the .run file using the terminal, but the result was yet again the same. Then I went to the terminal and entered these commands: sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* - It said it had nothing to uninstall sudo rm /ect/x11/xorg.conf - No such directory sudo dpkg-reconfigure xserver-xorg sudo startx sudo cp/ect/x11/xorg.conf.orig /ect/x11/xorg.conf - Also, no such directory sudo aticonfig --initial sudo reboot Then, I was presented with the log in screen, but when I tried to login (with my account), it flashed a black screen and then threw me back. Guest account still works (without unity and compiz, tough) and I can still use TTY. And I also got the "AMD Testing Only" watermark. Then I figured that I should stop messing with the terminal and get help before I unleashed Apocalypse XD. Side notes: My Ubuntu is installed on a ext4 partition with 60GB, and I dual boot with Windows 7 (at least for now). My internet is a 50kbps 3G-ish, so downloading even small files is a pain, let alone a video driver. I would rather not reinstall the O.S., it was a herculean task to download everything I had in there, and I have very little free disk space for backups. I'm still new to Ubuntu (I know some basic commands), and I don't know how to debug, so please, be patient XD And using Windows, my internet is even slower (is that possible?), so it kind of leaves a torture aftertaste xD. So, if you guys could answer quickly, it would be greatly appreciated. Thanks in advance. If you need any info, just ask (and explain how to get it XD).

  Read the article

• How can I get rid of the motd message "*** /dev/sdb1 will be checked for errors at next reboot ***"? [duplicate]

  - by kmm

  This question already has an answer here: Persistent “disk will be checked…” in the message of the day (motd) even after reboot 3 answers My motd persistently has: *** /dev/sdb1 will be checked for errors at next reboot *** The problem is that I don't have /dev/sdb1 on my system. I only have /dev/sdb2 (mouted as /) and /dev/sda1 which mounts to /media/backup. I delete that line from /etc/motd, but it reappears after reboot. Here's my df output: Filesystem Size Used Avail Use% Mounted on /dev/sdb2 73G 3.7G 66G 6% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 760K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm /dev/sda1 1.9T 429G 1.4T 25% /media/backup Update Here is the output of sudo fdisk -l Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dfc2 Device Boot Start End Blocks Id System /dev/sda1 63 3907024064 1953512001 83 Linux Disk /dev/sdb: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049068 Device Boot Start End Blocks Id System /dev/sdb1 152301568 156301311 1999872 82 Linux swap / Solaris /dev/sdb2 * 2048 152301567 76149760 83 Linux Partition table entries are not in disk order I guess /dev/sdb1 is my swap space.

  Read the article

• Create a Texture2D from larger image

  - by Dialock

  I am having trouble with the basic logic of this solution: Xna: Splitting one large texture into an array of smaller textures in respect to my specific problem (specifically, I'm looking at the second answer.) How can I use my source rectangle that I already use for drawing to create a new Texture2D? spriteBatch.Draw(CurrentMap.CollisionSet, currentMap.CellScreenRectangle(x, y), CurrentMap.TileSourceRectangle(currentMap.MapCells[x, y].TileDepths[4]), Color.FromNonPremultiplied(0,0,0, 45), 0.0f, Vector2.Zero, SpriteEffects.None, 0.91f); I know I want a method that I started so: //In Update Method of say the player's character. Texture2D CollisionTexture = ExtractTexture(MapManager.CurrentMap.CollisionSet, MapManager.TileWidth, MapManager.TileHeight); // In MapManager Class who knows everything about tiles that make up a level. public Texture2D ExtractTexture(Texture2D original, int partWidth, int partheight, MapTile mapCell) { var dataPerPart = partWidth * partheight; Color[] originalPixelData = new Color[original.Width * original.Height]; original.GetData<Color>(originalPixelData); Color[] newTextureData = new Color[dataPerPart]; original.GetData<Color>(0, CurrentMap.TileSourceRectangle(mapCell.TileDepths[4]), originalPixelData, 0, originalPixelData.Count()); Texture2D outTexture = new Texture2D(original.GraphicsDevice, partWidth, partheight); } I think the problem is I'm just not understanding the overload of Texture2D.GetData< Part of my concern is creating an array of the whole texture in the first place. Can I target the original texture and create an array of colors for copying based on what I already get from the method TileSourceRecatangle(int)?

  Read the article

• Network/browser issues after upgrade to 12.04

  - by Reg

  I let my laptop upgrade to 12.04. And have no network afterwards. I went through all the articles I could find in google. Right now, I can ping google, and yahoo, but not cnn.com for example or anything else. Firefox says it can't reach google.com or gmail.com (or anything, not even IP. /etc/network/interfaces dns-nameservers 8.8.8.8 <<<<<added auto lo iface lo inet loopback /etc/dhcp/dhclient.conf #prepend domain-name-servers 8.8.8.8,8.8.4.4; prepend domain-name-servers 127.0.0.1; <<<<< tried both /etc/NetworkManager/NetworkManager.conf with and without dns=dnsmasq commented out. I can ping my wireless router and connect to it just fine. Have tried proxy/noproxy. This looks like After Upgrade to 12.04 - cannot connect to network but no answer there. I would hate to do a fresh install. Any assistance appreciated.

  Read the article

• How should a team share/store game content during development?

  - by irwinb

  Other than Dropbox, what out there has been especially useful for storing and sharing game content like images during development (similar feature set to Dropbox like working offline, automatic syncing and support for windows/osx)? We are looking into hosting our own SharePoint server but it seems to be really focused on documents... Maybe Box.net would work? EDIT For code, we are using Git. To be more precise, I was looking for an easy, automatic way for content produced by artists/audio engineers to be available to everyone. Features like approvals of assets don't hurt either. Following the answer linked by Tetrad, Alienbrain looked pretty interesting but..is way out of our budget (may be something to invest in in the future). What ended up doing... We were going to go with Box.net but downloading the sync apps for desktop use required us to wait to be contacted by them for some reason. We did not have much time to wait so we ended up going with Dropbox Teams. Box.net has a nice feature set but we never really felt held back without them. Thanks for the help :).

  Read the article

• C#.NET: How to update multiple .NET pages when a particular event occurs in one .Net page? In another words how to use Observer pattern(Publish and subscribe to events)

  Problem: Suppose you have a scenario in which you have to update multiple pages when an event occurs in main page. For example imagine you have a main page where you are dispalying a tab control. This tab control has 3 tab pages where you are loading 3 different user controls. On click of an update button in main page imagine if you have do something in all the 3 tab panels. In other words an event in main page has to be handled in many other pages. An event in main page which contains the tab control has to be handled in all the tab panels(user controls) Answer: Use Observer pattern Define a base page for the page that contains the tab control. Main page which contains the tab: Baseline_Baseline Basepage for the above main page: BaselineBasePage User control that has to be udpated for an event in main page: Baseline_PriorNonDeloitte Source Code: public class BaselineBasePage : System.Web.UI.Page { IList lstControls = new List(); public void Add(IObserver userControl) { lstControls.Add(userControl); } public void Remove(IObserver userControl) { lstControls.Remove(userControl); } public void RemoveAllUserControls() { lstControls.Clear(); } public void Update(SaveEventArgs e) { foreach (IObserver LobjControl in lstControls) { LobjControl.Save(e); } } } public interface IObserver { void Update(SaveEventArgs e); } public partial class Baseline_Baseline : BaselineBasePage { . . . this.Add(_ucPI); this.Add(_ucPI1); protected void abActionBar_saveClicked(object sender, EventArgs e) { SaveEventArgs se = new SaveEventArgs(); se.TabType = (BaselineTabType)tcBaseline.ActiveTabIndex; this.Update(se); } } Public class Baseline_PriorNonDeloitte : System.Web.UI.UserControl,IObserver { public void Update(SaveEventArgs e) { } } More info at: http://www.dofactory.com/Patterns/PatternObserver.aspx span.fullpost {display:none;}

  Read the article

• Help! Problem dual boot ubuntu windows8 (can't start ubuntu) [duplicate]

  - by a35

  This question already has an answer here: Installing Ubuntu on a Pre-Installed Windows 8 (64-bit) System (UEFI Supported) 5 answers EDIT: I know that there are many topics about dual boot ubuntu windows8, i have read them, my problem is that i cant boot ubuntu neither from HDD nor from live USB. I know about boot repairing, but how can I use it, If i cant boot ubuntu?? I heard about terrible problems with windows 8-linux dual boot, but I really need ubuntu because of school. I read many tutorials how to install ubuntu next to windows8, but despite that a problem accured. Here is what I have done. I have MSI GE60, windows(64bit) is running on mSATA SSD C drive. HDD is divided to two partitions for windows and I left there 50GB for ubuntu. I downloaded ubuntu 12.04.3desktop-amd64(64bit), created bootable USB using Universal USB Installer (recommended on Ubuntu site). I disabled USB legacy support (that Ubuntu could be installed in EFI mode- I was following instructions on Ubuntu site), and also Secure Boot (windows is now angry with me because I turned it off- when I start windows it informs me I should enable that). I inserted USB rebooted computer and chose install ubuntu, divided free 50GB space to swap(2000MB) and rest as ext4 main storage space for ubuntu. Installation passed normally, Ubuntu then asked me to reboot computer. After reboot windows 8 started. Now I can't start ubuntu. When I restart win8 to uefi there is possibility to boot ubuntu, but when I choose it, it crashes. When I choose try ubunfu from connected USB, nothing happend, still dark screed. What is wrong? Can you help me? I am in hurry to do it because of school. Thanks.

  Read the article

• Attempting to install ubuntu 11.10

  - by Orin

  I installed version 9 sometime ago and since have forgotten the process for partitioning, or the layout is different. I have 5 partitions but only have windows xp installed on the pc in question with that being the one of those 5 partitions which is ntfs 34444 mb its - a 40gig hard-drive. My first question is... is there a way to get a screen shot of the partitioner when I am running the demo session straight from disc... these 5 partitions are fragmenting the other 4ish gig needed to install.. I get an error message which says go back and make sure 1 partition has at least 2.5 gig or so. But I have no idea what I am supposed to set these remaining 4 partitions to in order to proceed.. I have read up on install guides and understand that one must be "/" root and another as swap... but to no avail thus far have the correct combo. A few screen shots will no doubt help you guys answer as I'm baffled as to what specific details to give as each one has various settings on inspection, and I don't really feel like writing it all down manually then posting specs for each one

  Read the article

• GlassFish/Java EE Community Open Forum Tomorrow!

  - by reza_rahman

  Still have lingering questions on the goals and future of GlassFish? Want to know a little more about the upcoming GlassFish 4.0.1 release? Something on your mind about Java EE 8/GlassFish 5? You have a golden opportunity to pose your questions and speak your mind tomorrow! The good folks over at C2B2 have gone through a lot of time and effort to organize a very useful online event for the London GlassFish User Group - they are having me answer all your questions online, in real time, "face-to-face". Steve Millidge of C2B2 will be moderating the questions and joining the conversation. Did I mention the event was online, free and open to anyone? The event is tomorrow (May 30th), so make sure to register as soon as possible through the C2B2 website (the registration page has more details on the event). It will be held at 4:30 PM BST / 11:30 AM EST / 8:30 AM PST - you must register to participate. Hope to talk to you tomorrow?

  Read the article

• Hide or Show singleton?

  - by Sinker

  Singleton is a common pattern implemented in both native libraries of .NET and Java. You will see it as such: C#: MyClass.Instance Java: MyClass.getInstance() The question is: when writing APIs, is it better to expose the singleton through a property or getter, or should I hide it as much as possible? Here are the alternatives for illustrative purposes: Exposed(C#): private static MyClass instance; public static MyClass Instance { get { if (instance == null) instance = new MyClass(); return instance; } } public void PerformOperation() { ... } Hidden (C#): private static MyClass instance; public static void PerformOperation() { if (instance == null) { instance = new MyClass(); } ... } EDIT: There seems to be a number of detractors of the Singleton design. Great! Please tell me why and what is the better alternative. Here is my scenario: My whole application utilises one logger (log4net/log4j). Whenever, the program has something to log, it utilises the Logger class (e.g. Logger.Instance.Warn(...) or Logger.Instance.Error(...) etc. Should I use Logger.Warn(...) or Logger.Warn(...) instead? If you have an alternative to singletons that addresses my concern, then please write an answer for it. Thank you :)

  Read the article

• Web-Service: How much would you charge? [closed]

  - by jacksbox

  I´ve to make an offer to a client who wants me to develope a web-service for him. I have some trouble calculating the pricing - can you help me? Here is a rough outline of the project: It´s a portal on which various artists and entertainers can register and administrate there profile (texts, gallerie, some embedded videos, choose categories and radius of offer, etc). Other user can browse the artists by 3-4 level categories and countries/staats. If someone wants to hire a artists, he can put them in an "shopping-basket" and can mail everyone in his basket. The Artists can answer them with a form on the website (he doesn't get the email of the other person). Users should be able to comment/rate the artists. But if an artists wants this comments/ratings visible on his profile he must pay, and after that, the admin of the site must activate this comments/ratings. So, no more information given, what would you charge (ca.)? Edit: It´ll be developed with php/codeigniter. A .psd design is already there.

  Read the article

• Why using Fragments?

  - by ahmed_khan_89

  I have read the documentation and some other questions' threads about this topic and I don't really feel convinced; I don't see clearly the limits of use of this technique. Fragments are now seen as a Best Practice; every Activity should be basically a support for one or more Fragments and not call a layout directly. Fragments are created in order to: allow the Activity to use many fragments, to change between them, to reuse these units... == the Fragment is totally dependent to the Context of an activity , so if I need something generic that I can reuse and handle in many Activities, I can create my own custom layouts or Views ... I will not care about this additional Complexity Developing Layer that fragments would add. a better handling to different resolution == OK for tablets/phones in case of long process that we can show two (or more) fragments in the same Activity in Tablets, and one by one in phones. But why would I use fragments always ? handling callbacks to navigate between Fragments (i.e: if the user is Logged-in I show a fragment else I show another fragment). === Just try to see how many bugs facebook SDK Log-in have because of this, to understand that it is really (?) ... considering that an Android Application is based on Activities... Adding another life cycles in the Activity would be better to design an Application... I mean the modules, the scenarios, the data management and the connectivity would be better designed, in that way. === This is an answer of someone who's used to see the Android SDK and Android Framework with a Fragments vision. I don't think it's wrong, but I am not sure it will give good results... And it is really abstract... ==== Why would I complicate my life, coding more, in using them always? else, why is it a best practice if it's just a tool for some cases? what are these cases?

  Read the article

• Is "If a method is re-used without changes, put the method in a base class, else create an interface" a good rule-of-thumb?

  - by exizt

  A colleague of mine came up with a rule-of-thumb for choosing between creating a base class or an interface. He says: Imagine every new method that you are about to implement. For each of them, consider this: will this method be implemented by more than one class in exactly this form, without any change? If the answer is "yes", create a base class. In every other situation, create an interface. For example: Consider the classes cat and dog, which extend the class mammal and have a single method pet(). We then add the class alligator, which doesn't extend anything and has a single method slither(). Now, we want to add an eat() method to all of them. If the implementation of eat() method will be exactly the same for cat, dog and alligator, we should create a base class (let's say, animal), which implements this method. However, if it's implementation in alligator differs in the slightest way, we should create an IEat interface and make mammal and alligator implement it. He insists that this method covers all cases, but it seems like over-simplification to me. Is it worth following this rule-of-thumb?

  Read the article

• What makes Ubuntu awesome [closed]

  - by Shagun

  My question may sound stupid or inappropriate for this site in which case I apologize before hand. This thing has bothered me for quiet some time so please correct me if there is anything inappropriate: I have been using Ubuntu for past 1 year and I know how awesome it is and in what terms is it better than windows.But around 2 weeks ago some of my friends asked me to show them something on Ubuntu or tell something about Ubuntu that makes people prefer it over windows. I tried to convince them by telling things like its open-source, that most of the super-computers run on Linux, that its unaffected by virus and other stuff but they seemed unconvinced. Maybe what they we looking for was some mind-boggling feature which only Ubuntu (Linux) has. Since that day I have been thinking but yet don't have anything that will show them the true powers of Linux. Please suggest your response to such a situation as it troubles me that I am not able to explain them one thing that I myself believe in. Thank you. PS : I am not looking for a theoretical answer but would like to hear of one such application which it and only it provides.

  Read the article

< Previous Page | 323 324 325 326 327 328 329 330 331 332 333 334  | Next Page >