Search Results

Search found 12068 results on 483 pages for 'sv gets'.

Page 329/483 | < Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

• Windows takes a very long time to shut down even in safe mode

  - by user1526247

  On Windows 7 the computer freezes for about 5 minutes once it gets to "Shutting down...". I can't remember when it started happening. I just lived with it for a while. The first thing I tried was a full scan using Microsoft Security Essentials. This did not solve the problem. I then went into msconfig and turned off everything I could get away with in the startup and services tabs. This did not solve the problem. I then uninstalled every program on this computer save the most basic programs. This did not solve the problem (did not uninstall drivers or catalyst). I then went through and turned off every single service and did a reboot. This did not solve the problem. I then booted into safe mode and just tried shutting it down. The problem even happens in safe mode. I have tried examining the event logs but with no success. They just say things like "blah blah has entered the stopped state" with no real clues about what program is causing me all this grief. *it may be worth noting that Ubuntu is installed on the same computer and the ubuntu boot loader is the one being used.

  Read the article

• Why does my router log crazy amounts of blocked traffic on port 1701?

  - by Vlad Seghete

  I have a 2701HGV-B 2Wire modem and router (AT&T). The log is basically full with entries similar to the following with a time between a fifth and a third of a second between entries: src=86.156.7.170 dst=xxx.xxx.xxx.38 ipprot=17 sport=6882 dport=1701 Unknown inbound session stopped src=58.176.22.252 dst=xxx.xxx.xxx.38 ipprot=17 sport=21573 dport=1701 Unknown inbound session stopped src=91.221.6.250 dst=xxx.xxx.xxx.38 ipprot=17 sport=25902 dport=1701 Unknown inbound session stopped ... where the source IP will be different for every entry. The entries accumulate constantly, every single second that the router is on several of them appear in the log. The destination is the WAN address for my router. I understand that this is somehow related to VNCs, but I don't know enough to figure out why my router is getting bombarded with requests for a VNC session. Is there anything fishy going on or is this normal? If it is normal, how do I keep these entries from spamming my log files? Since there's about two or three of them every second, everything else gets drowned out.

  Read the article

• How can I create a macro that acts on a relative reference rather than an absolute reference to cell A1?

  - by Bruce

  I have a master rent statement in an Excel 2007 (macro enabled) spreadsheet that shows all tenants in rows with columns formed by the months. Each tenant then has a separate rent statement sheet like the one below that pulls the data through from the master rent statement and all I do then is to copy the last 4 columns to the right and add them to the right, just renaming the month labelled as ‘rent due’ with the current month and then hiding the previous last 4 columns to the left so that the statement always shows the previous month's activity and the amount due for the current month: I used a macro to speed up the creation of these statements, but then found that in some cases the result was wrong and needed major correction because the macro use absolute references i.e. its starting position was relative to cell A1 whereas some of my rent worksheets commence from a different column and in some cases from a different column and a different row. I have tried recording the macro with 'Use relative references' but when trying to use the macro it only gets part way through its operation before it stops and the message appears: Run time error '1004' Application defined or object defined error with the option to End or Debug or go to Help and then I'm stuck as I don't know how to debug and work in VBA or understand what has gone wrong. I want to record a single macro that always remains relative to the last 'Total Due' column heading (in the sample, it’s cell FF3 but on another worksheet could be cell GA26) and thus enables me regardless of where on the worksheet the rent statement is placed to add through my recorded macro a further four columns with updated dates and a repositioned 'Total Due' summary (in the sample in cells FE23 and FF23). The contents of cells FE23 and FE22 are always the same number of rows from the 'Sample Rent Statement, Service Charge and Sub Total' rows. I've searched on the web and in the help files of Excel 2007 but have been totally stumped by this, so currently I have to re-record a quantity of macros each month to cover all of the permutations of the worksheets in my Excel rent workbook, which is starting to become pointless in terms of saving time. Does someone know a solution to this problem please?!

  Read the article

• Computer is dying--what should I be looking for?

  - by Will

  Okay, I'm a bit knowledgeable with pooters and such, but i'm confused. My computer is dying slowly, and I'm not sure what part is causing this. Computer details: Vista, dell machine, intel Q6600, 2.4 Core Duo (quad core), standard memory and drive (unknown manufacturer). Symptoms: I would best describe the symptoms as memory corruption. After a couple days on, I start getting applications crashing or failing to open for a lack of "resources". Sounds are corrupted. Onscreen text gets corrupted; the characters of text are garbled, not the pixels on the screen. Video memory seems untouched as I haven't seen any misplaced pixels. Recently I've lost files on disk. I've also experienced errors reporting a supposed lack of disk space, even though I have fifty gigs free. There was one point where I couldn't get to the POST when booting up. After I cleaned everything (see next) this hasn't happened. Diagnostic steps: First thing I did was clean the case. There was a lot of dust buildup on heatsinks, so I cleaned all that up. No help. Next, I disconnected and reconnected everything, from power cables to memory (did not reseat cpu). No change. Last, I ran the standard vista memory diagnostics and ran checkdisk. Both reported no errors found. I have not run any POST tests, now that I think about it. I'm at a loss at this point. Disk appears fine, memory too. I'd expect motherboard issues to result in the thing not booting up, yet it does every time. What should I be looking at? What more can I do?

  Read the article

• Let varnish send old data from cache while it's fetching a new one?

  - by mark

  I'm caching dynamically generated pages (PHP-FPM, NGINX) and have varnish in front of them, this works very well. However, once the cache timeout is reached, I see this: new client requests page varnish recognizes the cache timeout client waits varnish fetches new page from backend varnish delivers new page to the client (and has page cached, too, for the next request which gets it instantly) What I would like to do is: client requests page varnish recognizes the timeout varnish delivers old page to the client varnish fetches new page from backend and puts it into the cache In my case it's not site where outdated information is such a big problem, especially not when we're talking about cache timeout from a few minutes. However, I don't want punish user to wait in line and rather deliver something immediate. Is that possible in some way? To illustrate, here's a sample output of running siege 5 minutes against my server which was configured to cache for one minute: HTTP/1.1,200, 1.97, 12710,/,1,2013-06-24 00:21:06 ... HTTP/1.1,200, 1.88, 12710,/,1,2013-06-24 00:21:20 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:22:08 ... HTTP/1.1,200, 1.89, 12710,/,1,2013-06-24 00:22:22 ... HTTP/1.1,200, 1.94, 12710,/,1,2013-06-24 00:23:10 ... HTTP/1.1,200, 1.91, 12709,/,1,2013-06-24 00:23:23 ... HTTP/1.1,200, 1.93, 12710,/,1,2013-06-24 00:24:12 ... I left out the hundreds of requests running in 0.02 or so. But it still concerns me that there are going to be users having to wait almost 2 seconds for their raw HTML. Can't we do any better here? (I came across Varnish send while cache , it sounded similar but not exactly what I'm trying to do.)

  Read the article

• Best format for hard drive for Windows and Mac?

  - by Neil

  I have a 500 GB USB External Hard Drive. I need four partitions on it, for the following purposes: 160 GB for a bootable backup of my Mac. 160 GB for a bootable backup of my Windows. 11 GB for a bootable Snow Leopard Install Disk Rest as for file storage. Now I need a partition table which will get recognised on both Windows and Mac, without needing extra software on Windows, which will let me keep bootable copies of both OS'es, but let me access the file storage from both OS'es. Currently, I have a GUI Partition Table, with Mac OS Extended (Journaled) Partitions for the two backups, Mac OS Extended for the Install Disk, and NTFS for the file storage. While this gets recognised perfectly on my Mac, thanks to an NTFS for Mac driver from Paragon, when connected to Windows, the drive is detected by the machine (listed in Safely Remove USB), but not recognised in Windows Explorer unless I install MacDrive, which is not feasible for me to install on public Windows Machines I might wanna access my storage area on. Can someone recommend the best combination of formats and software/drivers to get this done seamlessly?

  Read the article

• Nginx Removes the index.php from URL

  - by codeHead

  I have a codeigniter php application on nginx. It works as expected on Apache but after moving to nginx, I noticed that the index.php is automatically removed from the URL in all my links. Infact when I try using index.php it does not go to the desired URL but gets redirected to my default controller. below is a coopy of my nginx.conf file. server{ listen 80; server_name mydomainname.com; root /var/www/domain/current; # index index.php; error_log /var/log/nginx/error.log; access_log /var/log/nginx/access.log main; location / { # Check if a file or directory index file exists, else route it to index.php. try_files $uri $uri/ /index.php ; } location ~* \.php { fastcgi_pass backend; include fastcgi.conf; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_read_timeout 500; #fastcgi_param SCRIPT_FILENAME $document_root/index.php; add_header Expires "Thu, 01 Jan 1970 00:00:01 GMT"; add_header Cache-Control "no-cache, no-store, private, proxy-revalidate, must-revalidate, post-check=0, pre-check=0"; add_header Pragma no-cache; add_header X-Served-By $hostname; } location ~* ^.+\.(css|js)$ { expires 7d; add_header Pragma public; add_header Cache-Control "public"; } # set expiration of assets to MAX for caching location ~* \.(ico|gif|jpe?g|png)(\?[0-9]+)?$ { expires max; log_not_found on; } } I need to use my URL With the index.php -- please help.

  Read the article

• Accessing or Resetting Permissions of a Mounted Registry Hive of a Different User / From a Different System

  - by Synetech

  I’m currently stuck using my backup system until I can replace my dead motherboard. In the meantime, I have put my hard-drive in this system so that I can access my files and keep working on the backup system. Fortunately, I don’t have a permission issues with the files (the partitions are FAT32). The issue I’m having is with the registry. I need to import some of my settings from the hives of my (old? normal?) installation of Windows into the one I’m currently using. Settings from the system hives (SYSTEM, SOFTWARE, etc.) are fine, but the user hive is giving me trouble. I’ve copied the NTUSER.DAT file from my other drive and mounted it with the reg command. Most of the keys (eg Software) are fine and I can access them without problem, but some of them (particularly the Identities key where Outlook Express settings are stored) complains that it cannot be opened. If I open the permissions dialog, I get an error about being unable to view the current permssions. If I then ignore it and try to take ownership of the key and it’s subkeys, I get an access-denied error. If I then add permissions for my user account on this system, I get an error, however I am then able to see the subkeys and values of the key. If I then try to access the subkeys, I get the same original errors. If I repeat the process for each subkey, I can see their values and subkeys, and so on, but of course this gets to be incredibly annoying and time-consuming (especially since the Identities key has a lot of subkeys). Is there an easier/temporary/more correct way to dump a key so that I can import it into my backup system?

  Read the article

• No Network Connection in WinXP image from Microsoft running on VirtualBox 3.1.6 OSE (Ubuntu 10.04) due to missing CD Rom

  - by Bevor

  I'd like to test local websites in IE7 and IE8.To do that I thought about using the free Microsoft images: http://www.microsoft.com/windowsxp/using/networking/setup/default.mspx I converted the VHDs to VDIs to make them run in VirtualBox. ( http://www.qc4blog.com/?p=721 ) This works fine. The problem is that in this Windows XP installation there is no Network Adapter configured. Actually nothing at all is configured because it needs the Windows XP CD Rom to do that. If I would have a Windows XP CD Rom, I would not need to run the Microsoft image, so is there some kind of workaround to get an internet connection? Meanwhile I set "bridged" in VirtualBox. But this doesn't help because "ipconfig /all" in the guest system doesn't show any data because nothing is configured. How can I get a connection to my local Apache (Host system). http://localhost would be enough. By the way: I can't install the "Guest additions". When I do that, the 3 days trial period of the guest system is suddenly gone, so I can't use it anymore and it is senseless. Any ideas? Update: I've tried the Vista image and it gets an internet connection. From Vista image I can get to my site with 192.168.1.3/mywebsite in the browser url. So actually I don't care about the WinXP issue anymore but I would be glad if anyone still knows a solution.

  Read the article

• Is there such a thing as a file hosted container which deduplicates data held within?

  - by Mallow

  Background I have backups of a website which stores all of it's data into a single file. This file is several gigs large and I have many different backups of this file. Most of the data within is mostly the same plus whatever was added or changed to it. I want to keep all the concurrent backups I've made through the years in case I find a horrible surprise of data corruption along the line. However storing a 10gig file every month gets expensive. Seeking Solution I've often thought about different ways of alleviating this problem. One thought that comes up very often combines the idea of a duplicating file system which doesn't require it's own partitioned volume on a hard drive. Something like what truecrypt does, what it calls, "file hosted containers" which when using the truecrypt program allows you to mount and dismount that volume as a regular hard drive. Question Is there a virtual hard drive mounter which uses file-based container which uses data deduplicaiton file system? (This question is a little awkward to put into words, if you have a better idea on how to ask this question please feel free to help out.)

  Read the article

• MicroSD card getting corrupted for no good reason

  - by ChaosR

  I recently bought an MicroSD card online. It's a Sandisk 16GB class 2. However, it has a nasty problem. Every time I fill it with my data, the fat tables get corrupted. I've tried reformatting it, blanking it, doesn't seem to solve the problem. I have tried windows and linux (ubuntu), both have the problem. I've used my usb microsd readers, and even tried putting it in my phone and putting data on it from there. All have this problem. Now the really odd thing is, besides the corrupted file tables, no programs can find anything wrong with the hardware. I've tried both chkdisk and "badblocks -w", neither give any type of error. Now I don't know if the actual data gets corrupted, or if its just filesystem tables. What happens is that one or more folders start showing a load of chinese-charred (random UTF8 symbols I suppose) folders and files, and it is impossible to do anything with those. All the other data (outside of the corrupted folders) seems fine. I've tried to test it, and the problem doesn't seem to show up until I fill the disk upto about 3~4GB. After that I can still access the data. But as soon as I eject/safely remove/unmount it, the bad things happen somehow. Next time I plug it in, the folders I most recently wrote to (but sometimes also the folders I wrote the time before last time to) are all gibberish. Does anybody have any clue what might be going on here?

  Read the article

• Static DHCP binding

  - by Alex

  Good time of day, SF people. I have created a manual DHCP binding entry on a Cisco router so that a client would always get leased to it. The clients wants to get the same address on both of his dual-boot linux systems. He tries to get an IP address leased and he succeeds on one of the dual-boot operating systems. When he reboots to another one he gets a lease for a completely different one. I don't get it. The MAC addresses are the same (we checked in ifconfig, so what could be happening here? Why is the router confused? Or is it something else? Also, how can I check DHCP server IP address who I have got an IP address from (on Linux)? Configuration on Cisco: ip dhcp pool MANUAL_BINDING0001 host 192.168.0.64 255.255.255.0 hardware-address dead.beef.1337 dns-server 192.168.8.11 default-router 192.168.0.254 domain-name verynicedomainigothere.cn PS. Is it mandatory to use client-name configuration line?

  Read the article

• What could cause a dual-monitor PC to suddenly stop using one of the screens?

  - by raldi

  I've got a dual-monitor setup using a GeForce 7900GT that was working fine for over a year... then suddenly, only one of the screens works. It's not OS-related, because even on startup, only one screen displays the BIOS checks. In the past, both screens would show it together. I didn't change anything to trigger this The monitor that gets a signal is random -- sometimes the one on the left goes black, sometimes the one on the right. The monitors and their cables are good -- I can switch both or either, and I get a signal just fine. They're plugged in, too. It's not the video card, either -- I have an identical 7900GT in another machine, and swapping the two didn't fix anything. It's not dust on the motherboard -- I pulled everything out, cleaned it off, checked for obvious damage, put it all back together, and no change. My next two steps are going to be to reset the CMOS info and to try swapping out the motherboard. Before I do that, does anyone have any other ideas?

  Read the article

• Sharepoint web part fails intermittently

  - by pringly

  I have a MOSS 2007 environment, 2 web servers and a DB server, load balanced between the two web servers. I deployed a web part recently, which worked fine for a while, but failed on web server 2 after a day. When it fails, it gets the error message: 'A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe’ Once it has failed, it will stay that way until an IIS reset is done. The other web server never fails, I tried to force the second web server to fail to recreate the issue and have been unable to do it. I tried placing it under heavy http traffic and it handled it fine. Put it back in the pool and it failed again after about 7 hours. So, if i remove the .dll for the webpart from the affected web server, the webpart doesnt stop working. Is this normal behavior? I checked the bin directory for the site and the global assembly and it there is no other copy of the .dll anywhere else on the server. Also, when checking the web part gallery, if the web part has failed it will appear in the gallery, but by trying to add a new webpart, the .dll wont be listed. I have no idea how to continue troubleshooting from here or even fix it, any ideas?

  Read the article

• Windows 8 Communication Sound Setting not working

  - by blackmastiff

  I've been having a problem on my new laptop recently which is familiar but baffling the usual fixes. I'm running Windows 8 with an onboard Realtek soundcard. It's similar to the one on my older computer running Windows 7. The problem is, when I'm in Skype or Mumble, Windows changes the sound output to lower everything else automatically. I've disabled the communications sound change option on the communications tab within sound devices and checked all the applications settings to insure that they are not responsible. They aren't, and I noticed something else. When I'm in the sound properties dialog, and I switch to the microphone tab, the same audio output reduction occurs. This seems to say to me that the microphone must be responsible in some way, but seeing as I uninstalled all the drivers and installed windows drivers instead, I'm confused as to why this would be occurring. Any thoughts? EDIT: I just tried disabling the built in microphone and the sound no longer get changed. More confused now? As soon as I turn it back on, the sound gets dropped again. Incidentally, the fix for this on windows 7 was this question: Windows 7 lowers applications' volume automatically I've got my computer set that way and it doesn't work.

  Read the article

• How to prevent response to who-has requests on virtual eth interface?

  - by user42881

  Hi, we use small embedded X86 linux servers equipped with a single physical ethernet port as a gateway for an IP video surveillance application. Each downstream IP cam is mapped to a separate virtual IP address like this: real eth0 IP address= 192.168.1.1, camera 1 (eth0:1) =192.168.1.61, camera 2 (eth0:2) =192.168.1.62, etc. etc. all on the same eth0 physical port. This approach works well, except that a specific third-party windows video recording application running on a separate PC on the same LAN, automatically pings the virtual IPs looking for unique who-has responses on system startup and, when it gets back the same eth0 MAC address for each virtual interface, freaks out and won't allow us to subsequently manually enter those addresses. The windows app doesn't mind, tho, if it receives no answer to the who-has ping. My question - how can we either (a) shut off the who-has responses just for the virtual eth0:x interfaces while keeping them for the primary physical eth0 port, or, in the alternative, spoof a valid but different MAC address for each virtual interface? Thanks!

  Read the article

• Screen recording in Windows 8 makes PC unusable?

  - by Skadier

  OS used: Windows 8 Pro x64 Hi there, I got a weird problem. I tried to record my screen using different screen recording applications like Camtasia7, Hypercam, and some others. So if I hit "record" everything works fine for about 3-4 seconds. Then the PC slows down heavily caused by extremly high IO usage. The PC gets nearly unusable and laggs like hell. I can't switch applications, can't get TaskManager with Ctrl+Alt+Del, or something else without waiting 1-3 Minutes. After about 5-8 Minutes and a bit of luck I am sometimes able to end the process of the recorder and IO calms down very slow(100% IO lasts for about 2 Minutes before becoming normal). I don't know why this happens. Screen recorders that support Windows 8 aren't out afaik but at least Camtasia7 worked with Windows 8 Developer Preview and Windows 8 Release Preview (only had to change record method to .avi). No slow downs or something else. Is there anyone out there who knows this problem too? Is there maybe a solution to this problem?

  Read the article

• Windows 7 delayed file delete

  - by GregoryM

  I'm stuck with a pretty rare problem that happens on Windows 7 OS only. Every time I'm deleting the file with *.exe extension through explorer, the file doesn't get deleted immediately. I'm forced to wait for around one-two minutes before the system will delete the file. The main problem is that I cannot develop in such situation, because every time I build my solution, the old executable gets 'deleted', but is still there. So the new one cannot be created by Visual Studio. This problem breaks the Steam update progress and a few other installers functionality too. Fresh installed Win7 doesn't have this kind of trouble, so I guess this must be some bad registry entries or some services. Browsing the internet for solutions I found only this: http://www.sevenforums.com/software/72091-several-minute-delay-when-deleting-any-exe-file.html. But the solution the author found is not working (change the userName :)). Is there any ideas how to find what causes this to happen? BTW: when I place the file into Trash bin, no delay occurs. When I delete file with Total Commander - no delay too. Tech details: Windows 7 x64 Ultimate.

  Read the article

• Notepad++ incorrect syntax highlithing?

  - by user360919

  So I want to build a XHTML 1.0 Strict based website. Using Notepad++ for syntax highlighting came as an idea to me. But when I tried to put the XML declaration (as stated in the spec, proper XHTML pages should use a XML declaration and be served as application/xhtml+xml) I can't get the entire document highlighted propperly. Here is the code I used for a basic page: <?xml version="1.0" encoding="UTF-8" standalone="no" ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en-us" lang="en-us"> <head> <meta http-equiv="Content-Type" content="application/xhtml+xml; charset=UTF-8" /> <title>Page</title> <script type="application/javascript"> alert("A perfectly valid xHTML page..."); </script> <style type="text/css"> #test { text-align: center; } </style> </head> <body> <h1 id="test">TEST</h1> </body> </html> Paste this in Notepad++ and you'll see that it won't highlight the code between <script type="application/javascript"> and </script> (it renders its background white) if language is set to XML. If I set the language to HTML, then the script gets correctly highlighted but the XML declaration is not. What to do? How to make a hybrid language - combination of XML and HTML?

  Read the article

• Request sent with version Http/0.9

  - by user143224

  I am using common-HttpClient ver 3.1. All my requests are having correct (default) Http version in the request line i.e Http/1.1 except fot 1 request. Following Post request gets the requestline as Http/0.9 server : port/cas/v1/tickets/TGT-1-sUqenNbqUzvkGSWW25lcbaJc0OEcJ6wg5DOj3XDMSwoIBf6s7i-cas-1 Body: service=* I debugged through the httpclient code and saw the requestline is set to http/1.1 but on the server i see the request coming as http/0.9. i tried to set the http version explicitly using the HttpMethodParams but does not help. Does someone has any idea what could be wrong? HttpClient client = new HttpClient(); HostConfiguration hc = client.getHostConfiguration(); hc.setHost(new URI(url, false)); PostMethod method = new PostMethod(); method.setURI(new URI(url, false)); method.getParams().setUriCharset("UTF-8"); method.getParams().setHttpElementCharset("UTF-8"); method.getParams().setContentCharset("UTF-8"); method.getParams().setVersion(HttpVersion.HTTP_1_1); method.addParameter("service", URLEncoder.encode(service, "UTF-8")); method.setPath(contextPath + "/tickets/" + tgt); String respBody = null; int statusCode = client.executeMethod(method); respBody = method.getResponseBodyAsString();

  Read the article

• No internet through a web browser but Skype still works

  - by kim3er

  We get our office broadband through a BT Business Broadband WiFi router. We have a mixture of macs and windows PC/laptops connecting to it at any one time. All devices are able to connect to the wireless signal with pretty much full signal. However, only two computers (one windows, one os x) are able to consistently connect to the internet. The other three (one windows, two os x), while they can always connect to the wifi, exhibit one of three characteristics. No internet at all. Programs like Skype work, but no internet through a browser. Internet works, but with intermittent lag when switching between different sites. I'm assuming while trying to resolve different addresses. Ignoring point 1 for moment, my gut is telling me DNS. It is an up to 20MB line that usually gets to between 13MB and 15MB downstream. The router is capable of dealing with the amount of wireless devices that we're throwing at it. Has anyone got any suggestions for how I might further diagnose this problem (preferably in OS X)? Rich

  Read the article

• Could I have destroyed Partitioning-Scheme/Filesystem of HDDs with External Harddrive Case with builtin Raid-Controller?

  - by th3m3s

  I had just recently bought a Fantec QB-35US3R to have a nice box on my desk to make some backups to. Along with the HDD-Bay I had ordered some 4TB HDDs to let them run in Raid 5, which is handled by the hardware RAID controller of the Fantec HDD-Bay. The QB-35US3R arrived a few days before the hard drives, so I got impatient and had the idea to put three old 1TB disks in the Fantec device, just to test it... Long story short: I made a backup of the most important data on these three disks before they broke. I had set the configuration scheme to RAID 3 at the Fantec device. It seems, that the Fantec RAID controller has "somehow" destroyed the partitioning scheme or the file system, because when put into a HDD docking station, they get recognized by the OS (Ubuntu/Linux) but are not mountable anymore. I tried to recover the data from one HDD via gParted (parted), which ran some hours without success. Here I stopped, before trying other tools, cos I read that the longer a hard drive is running after a the partitioning got destroyed, the worse it gets. What could the HDD-Bay probably have done to my lovely hard drive disks? Is there some routine a RAID controller is executing, when it wants to create a RAID system? Like erasing the partition table (seems not plausible to me.) or writing some information to every hard drive in the RAID (seems more likely to me.)? Is there a chance to recover the data from these HDDs, or is the change a RAID controller makes so significant, that no software is of help?

  Read the article

• Windows 7 host with Ubuntu Guest and a performance hit, memory locks?

  - by Cyrylski

  I have a brand new Lenovo T510 with Core i5 and 4GB of RAM with Windows 7 on it. I Installed Ubuntu 10.10 in a Virtualbox. For some reason system gets really slow on this setup which makes me really angry. There's a video card shared with full 3D support enabled and 1GB of RAM allocated for the Ubuntu machine. It may sound stupid, but WHY is the whole memory consumed in an instant when I run Virtualbox? I struggled for like 10 minutes restraining myself from a brutal reset, and now everything runs smooth but memory "in use" in Resource Monitor is 3GB flat with only Chrome running. I'm new to Windows 7, but I'm really disappointed with performance at this point... I used to work in a different environment with much slower hardware and there was no such problem (WinXP over Ubuntu, 1GB out of 2GB allocated for WinXP guest on intel GMA). This is, until I clogged RAM totally there. But I was capable of running Chrome, Firefox and Apache server on a 1GB RAM in Ubuntu there and Photoshop CS4 on Windows XP and it worked. In this case I can't go beyond setting up Ubuntu properly. I bet I'm doing something wrong.

  Read the article

• Hard Reset USB in Ubuntu 10.04

  - by Cory

  I have a USB device (a modem) that is really finicky. Sometimes it works fine, but other times it refuses to connect. The only solution I have found to fix it once it gets into a bad state is to physically unplug the device and plug it back in. However, I don't always have physical access to the machine it is plugged in on, so I'm looking for a way to do this through the command line. This post suggests running: $ sudo modprobe -w -r usb_storage; sudo modprobe usb_storage However I get an "unknown option -w" output. This slightly modified command: $ sudo modprobe -r usb_storage Fails with the message FATAL: Module usb_storage is in use. If I try to kill -9 the processes marked [usb-storage] before running they refuse to die (I think because they are deeply tied to the kernel). Anyone know of a way to do this? NOTE: I cross-posted this on serverfault as I didn't know which was more appropriate. I will delete and/or link whichever one is answered first.

  Read the article

< Previous Page | 325 326 327 328 329 330 331 332 333 334 335 336  | Next Page >