Search Results

Search found 12705 results on 509 pages for 'ip routing'.

Page 33/509 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >

• Ping to IP address returned Destination Unreachable for a different IP address... huh?

  - by Hafthor

  This was totally an isolated incident, but I performed this command: ping 192.168.1.134 and got this result [image]: Pinging 192.168.1.134 with 32 bytes of data: Reply from 192.168.1.133: Destination host unreachable. Reply from 192.168.1.134: bytes=32 time=75ms TTL=128 Reply from 192.168.1.134: bytes=32 time=83ms TTL=128 Reply from 192.168.1.134: bytes=32 time=96ms TTL=128 note the .133 in the first 'unreachable' reply. I guess I don't understand how this is possible - even given a totally crazy coincidence.

  Read the article

• Tips and Suggestions IP Address Re-Addressing?

  - by RSXAdmin

  Hello serverfault Universe, My ever evolving and expanding local area network is currently using a class-C address. My network consists of multiple subnets depending on site/location. 192.168.1.x is site HQ 192.168.5.x is secondary site 192.168.10.x is so on and so forth. Long story short - I have inherited this network design from the previous admin who has left the company which started off with a dozen people and now has just over 300 full time/part time employees. We do not yet have client VPN access; but we do have site to site VPN setup. My question is, in preparation for outside client access to my network via Cisco ASA, I would like to re-address the HQ site because I understand a 192.168.1.x or 192.168.0.x are not very good choices for a company subnet - it may conflict with a home user's LAN when connecting to my LAN, I believe? Through your experience, does anyone out there have any suggestions and tips on how I can proceed with re-addressing my subnets. If I designed this network I would have gone with a 10.0.0.0 (mask 255.255.255.0) so I am leaning towards changing it to fit. Thank you.

  Read the article

• errors with libosmscout [migrated]

  - by Katlego Moukangwe

  I am using the libosmscout library for routing and I get the following error when I run the Routing demo; Routing . 169639811 169639816 169639831 253045594 //Running the routing demo with the map in the current directory. Cannot get start way! There was an error while calculating the route! I think It might be during the import stage since I get the following warnings; !! Cannot resolve way member 28693141 for relation 28322 boundary_administrative Mecklenburg-Vorpommern !! Cannot resolve way member 152675051 for relation 28936 boundary_administrative Bergedorf !! Cannot resolve way member 26496646 for relation 28964 boundary_administrative Harburg (Hamburg) !! Node 323985058 of way 135078286 cannot be joined with any other way of the relation 1817154 Neuenkirchen WW Multipolygon relation 2136137 has conflicting types for outer boundary (place_island vs. boundary_administrative) !! Cannot resolve way member 162656856 for relation 2174826 landuse_forest

  Read the article

• how to set static IP address in opensolaris

  - by pm100

  in closed solaris i knew how to do this. Edit /etc/inet/ipnodes, change /etc/defaultrouter, reboot in opensolaris there is not defaultrouter file. first thing I tried was System-admin-network switch to manual enter static address and netmask and gateway. press 'activate' "this interface cannot be activated". No error messages given. Close widget, open again. Now hangs for a minute and then closes try edit /etc/inet/ipnodes, reboot eth card not up. Network widget hangs then closes Works perfectly on DHCP

  Read the article

• How to get LAN ip to a variable in a Windows batch file

  - by Ville Koskinen

  I'm streaming audio from my Windows 7 laptop to a sound card attached to a router. I have a little batch script to start streaming. REM Kill any instances of vlc taskkill /im vlc.exe "c:\Program Files\VideoLAN\VLC\vlc.exe" <parameters to start http streaming> REM Wait for vlc TIMEOUT /T 10 REM start playback on router plink -ssh [email protected] -pw password killall -9 madplay plink -ssh [email protected] -pw password wget -q -O - http://192.1.159:8080/audio | madplay -Q --no-tty-control - & As you see the http stream is hard coded. It would be nice to get the address dynamically to reuse the script on other machines. Any ideas?

  Read the article

• Why Is Another Domain Resolving To My IP Address?

  - by Andrew

  I'm not really sure if this is something that I should worry about... I'm currently renting a dedicated server which is hosting a website I've created. The domain of the website was registered with GoDaddy. After submitting a sitemap to Google several months ago, I've noticed that another domain name is resolving to my IP address. This means that every page on my website is actually accessible from another domain. As far as I can tell, the other domain name is meaningless to me, so I'm not sure if this is something I should worry about or not. Is this a residual DNS record from another site that is probably no longer in use? Is it important from the standpoint of either security or SEO? My website is a .com which will later serve e-commerce purposes. The other domain has a top-level domain of st. It's the first one of those that I've encountered. Many thanks in advance!

  Read the article

• server host name and server ip address redirect (Debian, Apache)

  - by Matthias Reisner

  I have the following folder structure on my apache! .../var/www/www.x.tt/htdocs .../var/www/www.y.tt/htdocs I have defined a virtual host for each. So if I type in www.x.tt in my browser I get to the www.x.tt site. And the same for www.y.tt. But now my question! If I type in the server address or the server host name I get to the ../var/www directory but I want that the user will be redirected to the www.x.tt site! Do I have to create a new virtual host for this problem or is it also possible only to add a .htaccess Rule?! Thanks!

  Read the article

• What regular expression can I use to match an IP address?

  - by jennifer

  With the following grep syntax I want to match all IP address in a file (from a ksh script) grep '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}' file The problem: It also matches words (IP) that have more then 4 octets: 1.1.1.1.1 or 192.1.1.1.160 How can I match a valid IP and only IP addresses with 4 octets? I can also use Perl – a one line syntax solution, if grep doesn't work.

  Read the article

• How to set the IP address in a customized OpenWRT compilation

  - by Berdus

  I have been struggling today customizing OpenWRT. I checkout the stable using SVN, "make menuconfig" to customize the image, "make" it and run it on a router. Almost all my modifications work, except for the (Seemingly trivial) task of changing the default 192.168.1.1 address. I tried numerous files (scripts as well as config files) but I can't seem to change it (I can change it for a brief moment after boot using the "preinit" file, but after a few seconds it reverts to default). I suspect I should be setting it in the /etc/network file, but modifications there seem to be overwritten during boot. Maybe it has something to do with the br-lan interface? Does anybody have some thoughts on the subject? Thanks!

  Read the article

• Do all domains on the same shared hosting server have the same IP or ID

  - by silow

  Here's what I've got: siteA.com and siteB.com are hosted on hostgator. They're hosted on the same account of a shared hosting server (not VPS or dedicated). script.php is an external site that each of these 2 sites are accessing. I noticed that when siteA.com or siteB.com access the outside script.php, the script identifies them both as 1a.12.12ab.static.theplanet.com (apparently because hostgator uses theplanet.com servers). The fact that they're identified as the same value isn't surprising because after all they're hosted on the same account /home/user123/public_html. What I'm wondering about is how about other websites that are hosted on the same shared hosting server, but under other accounts. Basically other websites that are under another developer's control, but just happen to share the same hardware (hosting server). Do they also have the exact same identifier 1a.12.12ab.static.theplanet.com or that changes by account?

  Read the article

• Ubuntu IP Configuration - multiple subnets & interfaces

  - by HaydnWVN

  Have a 'new' mailserver running postfix on Ubuntu. We are having some problems configuring the subnets & interfaces. Basically 2 subnets (.253. & .254.) need to be connected through the 3rd subnet (.252.) where the Router is residing. # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.62.254.199 netmask 255.255.0.0 network 10.62.254.0 broadcast 10.62.255.255 #gateway 10.62.252.138 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 10.62.252.138 dns-search ***.com auto eth1 iface eth1 inet static address 10.62.253.199 netmask 255.255.0.0 network 10.62.253.0 broadcast 10.62.255.255 #gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-nameservers 10.62.252.138 dns-search ***.com auto eth2 iface eth2 inet static address 10.62.252.199 netmask 255.255.0.0 network 10.62.252.0 broadcast 10.62.255.255 gateway 10.62.252.138 #dns-nameservers 10.62.254.199 10.62.253.199 10.62.252.199 dns-search ***.com I have an external support company who are looking into this (they built and configured this server), but it's taking far too long... So I'm looking to highlight the mistake!

  Read the article

• Why is a network ID not needed to connect to an IP address?

  - by baddogai

  I know how IP basically works, and knows that an IP address composed of a network ID portion and a host ID portion, but when I type a IP address, say 8.8.8.8 into the web browser, I didn't supply any subnet mask information. So, how does the browser know where the dividing line is between the network ID and host ID? Since 8.8.8.8 may mean 8.8.8.8/8, 8.8.8.8/24 etc. In a nutshell, the IP address I supplied is ambiguous.

  Read the article

• IP fail-over address. Do i need it?

  - by Jon

  I received an email from my web hosting provider where i have 2 dedicated servers saying that from now on I have to pay for my IP fail-over addresses. The server we have hosts a tool used internally by our company. Traffic to it is quite low. No more than 3 people will use it at the same time. If something happens we can wait a day to have the tool up and running again. Is it worth having these fail-over addresses? thanks

  Read the article

• Do all domains on the same shared hosting server have the same IP or ID

  - by silow

  Here's what I've got: siteA.com and siteB.com are hosted on hostgator. They're hosted on the same account of a shared hosting server (not VPS or dedicated). script.php is an external site that each of these 2 sites are accessing. I noticed that when siteA.com or siteB.com access the outside script.php, the script identifies them both as 1a.12.12ab.static.theplanet.com (apparently because hostgator uses theplanet.com servers). The fact that they're identified as the same value isn't surprising because after all they're hosted on the same account /home/user123/public_html. What I'm wondering about is how about other websites that are hosted on the same shared hosting server, but under other accounts. Basically other websites that are under another developer's control, but just happen to share the same hardware (hosting server). Do they also have the exact same identifier 1a.12.12ab.static.theplanet.com or that changes by account?

  Read the article

• IIS doesn't respond to 127.0.0.1 (external IP works fine)

  - by Jordan

  I have an AWS web server - call it box.company.com. It's running IIS and if I visit http://box.company.com in a web browser (from any machine, including box.company.com), it responds correctly with our site. However, if I visit localhost/ or 127.0.0.1/ when I'm logged into box.company.com, I get a "couldn't connect to host" message. The hosts file has only one entry - the standard "127.0.0.1 localhost" line. Pinging 127.0.0.1 works fine. Pinging localhost correctly resolves to 127.0.0.1 and works fine. I've tried restarting IIS and restarting the DNS Cache. I had this problem once before, and restarting the server fixed it, but I'd like to know what's going on in case this happens again in the future.

  Read the article

• Change ip route metric

  - by notphunny

  I'm constantly switching between eth0 and wlan0 interface on my archlinux because I often change OpenWrt fw images on my second router (which isn't connected anywhere). So I have problem with my routes when I'm connected to my wlan and want to connect with Ethernet to my router. Both routers are on 192.168.1.1/24 and after connecting to my Ethernet profile eth0 route becomes default one (which is ok for the time), because of smaller metric I guess. So I'm interested, how can I change routes metric so my applications can be connected to the internet (through out wlan)? Maybe there is solution not to use Default Gateway on Ethernet profile, however I still want to know how to change metric. Or default route if there are more then one.

  Read the article

• PHP Session Cookies fail with users changing IP

  - by Columbo

  Hello, I have a login script for a small application that works by storing session cookies and checking them on each page to make sure the user is logged in. One of the two users who uses the system keeps getting logged out randomly. This appears to be down to the session cookie that shows then authenticated no longer being present. After a lot of investigation the only thing I can see that is different about this user is that their IP address is changing (today it was changing every hour (their on Sky)). The only thing is the change of IP address has happened 5 times this morning and only once has the user been logged off. Has anyone had a similar issue? Are session cookies in someway tied to IP addresses? Any help or links much appreciated. Thanks C

  Read the article

• Help with IP cameras

  - by Deepa

  Hey guys.. i have been given a task to find out the methods used to support many different IP cameras in a single software which manages them. for eg. The methods or protocols used by Milestone's XPrtotect softwares. We are already dealing with DVR cameras. Now we have to proceed with IP Cameras Can anyone just give me an idea about the methods used or some useful websites from which i can gather topics related to integration of IP cameras with our Access control Softwares. I need this urgently so please help.. Thanks.. Deepa

  Read the article

• 3G/Edge/GPRS IP addresses and geocoding

  - by LookitsPuck

  Hey all! So, we're looking to develop a mobile website. On this mobile website, we'd like to automatically populate a user's location (with proper fallback) based on their IP address. I'm aware of geocoding a location based on IP address (mapping to latitude, longitude and then getting the location with that information). However, I'm curious how accurate this information is? Are mobile devices assigned IP's when they utilize 3G, EDGE, and GPRS connections? I think so. If that is so, does it map to a relatively accurate location? It doesn't have to be spot on, but relatively accurate would be nice. Thanks! -Steve

  Read the article

• Change IP settings using C++

  - by Chris

  How do I change the IP settings of a Windows CE 6 box Programatically via C++? Functions for Windows might also work. I found that I can change the hostname via sethostname but couldn't find how to change IP address settings such as: IP Address DHCP Subnet Gateway DNS1 / DNS2 WINS1 / WINS2 Any advice / pointers would be great. Thanks. P.s. How would you get the box to update to those settings - is a refresh or the programming equivalent of ipconfig /renew required?

  Read the article

• Trigger IP ban based on request of given file?

  - by Mike Atlas

  I run a website where "x.php" was known to have vulnerabilities. The vulnerability has been fixed and I don't have "x.php" on my site anymore. As such with major public vulnerabilities, it seems script kiddies around are running tools that hitting my site looking for "x.php" in the entire structure of the site - constantly, 24/7. This is wasted bandwidth, traffic and load that I don't really need. Is there a way to trigger a time-based (or permanent) ban to an IP address that tries to access "x.php" anywhere on my site? Perhaps I need a custom 404 PHP page that captures the fact that the request was for "x.php" and then that triggers the ban? How can I do that? Thanks! EDIT: I should add that part of hardening my site, I've started using ZBBlock: This php security script is designed to detect certain behaviors detrimental to websites, or known bad addresses attempting to access your site. It then will send the bad robot (usually) or hacker an authentic 403 FORBIDDEN page with a description of what the problem was. If the attacker persists, then they will be served up a permanently reccurring 503 OVERLOAD message with a 24 hour timeout. But ZBBlock doesn't do quite exactly what I want to do, it does help with other spam/script/hack blocking.

  Read the article

• Juniper SSG-5 subinterface vlan routing to the internet

  - by catfish

  I'm unable to get a brand new Juniper SSG-5 with latest 6.3.0r05 firmware routing to the internet from a subinterface I created on bgroup0 setup as vlan2 (bgroup0.1 on "wifi" zone). When connected on the default vlan it gets on the internet just fine. When I switch to vlan2 I'm unable to get to the internet. I am able to get the correct ip address (10.150.0.0/24) from dhcp, able to get to the juniper management page, etc but nothing past the firewall, can't ping 4.2.2.2 or the internet gateway. Even setting up logging on the wifi-to-untrust policy and it does shows the attempts (it's it's timeouts). 172.31.16.0/24 is the untrusted lan, it's already nat'ed but works fine for testing. Can ping this ip from the default vlan but not from vlan2 192.168.1.0/24 is the trusted main lan 10.150.0.0/24 is the wifi isolated lan on vlan2 The idea is to setup an AP with lan and guest access (AP supports multiple ssid's on different vlans). I know I can setup the juniper to use different ports for the wifi lan and use their procurve switch to do the vlan separation, but I never used vlan'ing on a Juniper firewall and I would like to try it out this way. Here is the complete config file: unset key protection enable set clock timezone -5 set vrouter trust-vr sharable set vrouter "untrust-vr" exit set vrouter "trust-vr" unset auto-route-export exit set alg appleichat enable unset alg appleichat re-assembly enable set alg sctp enable set auth-server "Local" id 0 set auth-server "Local" server-name "Local" set auth default auth server "Local" set auth radius accounting port 1646 set admin name "netscreen" set admin password "xxxxxxxxxxxxxxxx" set admin auth web timeout 10 set admin auth dial-in timeout 3 set admin auth server "Local" set admin format dos set zone "Trust" vrouter "trust-vr" set zone "Untrust" vrouter "trust-vr" set zone "DMZ" vrouter "trust-vr" set zone "VLAN" vrouter "trust-vr" set zone id 100 "Wifi" set zone "Untrust-Tun" vrouter "trust-vr" set zone "Trust" tcp-rst set zone "Untrust" block unset zone "Untrust" tcp-rst set zone "MGT" block unset zone "V1-Trust" tcp-rst unset zone "V1-Untrust" tcp-rst set zone "DMZ" tcp-rst unset zone "V1-DMZ" tcp-rst unset zone "VLAN" tcp-rst unset zone "Wifi" tcp-rst set zone "Untrust" screen tear-drop set zone "Untrust" screen syn-flood set zone "Untrust" screen ping-death set zone "Untrust" screen ip-filter-src set zone "Untrust" screen land set zone "V1-Untrust" screen tear-drop set zone "V1-Untrust" screen syn-flood set zone "V1-Untrust" screen ping-death set zone "V1-Untrust" screen ip-filter-src set zone "V1-Untrust" screen land set interface "ethernet0/0" zone "Untrust" set interface "ethernet0/1" zone "Untrust" set interface "bgroup0" zone "Trust" set interface "bgroup0.1" tag 2 zone "Wifi" set interface "bgroup1" zone "DMZ" set interface bgroup0 port ethernet0/2 set interface bgroup0 port ethernet0/3 set interface bgroup0 port ethernet0/4 set interface bgroup0 port ethernet0/5 set interface bgroup0 port ethernet0/6 unset interface vlan1 ip set interface ethernet0/0 ip 172.31.16.243/24 set interface ethernet0/0 route set interface bgroup0 ip 192.168.1.1/24 set interface bgroup0 nat set interface bgroup0.1 ip 10.150.0.1/24 set interface bgroup0.1 nat set interface bgroup0.1 mtu 1500 unset interface vlan1 bypass-others-ipsec unset interface vlan1 bypass-non-ip set interface ethernet0/0 ip manageable set interface bgroup0 ip manageable set interface bgroup0.1 ip manageable set interface ethernet0/0 manage ping set interface ethernet0/1 manage ping set interface bgroup0.1 manage ping set interface bgroup0.1 manage telnet set interface bgroup0.1 manage web unset interface bgroup1 manage ping set interface bgroup0 dhcp server service set interface bgroup0.1 dhcp server service set interface bgroup0 dhcp server auto set interface bgroup0.1 dhcp server enable set interface bgroup0 dhcp server option gateway 192.168.1.1 set interface bgroup0 dhcp server option netmask 255.255.255.0 set interface bgroup0 dhcp server option dns1 8.8.8.8 set interface bgroup0.1 dhcp server option lease 1440 set interface bgroup0.1 dhcp server option gateway 10.150.0.1 set interface bgroup0.1 dhcp server option netmask 255.255.255.0 set interface bgroup0.1 dhcp server option dns1 8.8.8.8 set interface bgroup0 dhcp server ip 192.168.1.33 to 192.168.1.126 set interface bgroup0.1 dhcp server ip 10.150.0.50 to 10.150.0.100 unset interface bgroup0 dhcp server config next-server-ip unset interface bgroup0.1 dhcp server config next-server-ip set interface "serial0/0" modem settings "USR" init "AT&F" set interface "serial0/0" modem settings "USR" active set interface "serial0/0" modem speed 115200 set interface "serial0/0" modem retry 3 set interface "serial0/0" modem interval 10 set interface "serial0/0" modem idle-time 10 set flow tcp-mss unset flow no-tcp-seq-check set flow tcp-syn-check unset flow tcp-syn-bit-check set flow reverse-route clear-text prefer set flow reverse-route tunnel always set pki authority default scep mode "auto" set pki x509 default cert-path partial set crypto-policy exit set ike respond-bad-spi 1 set ike ikev2 ike-sa-soft-lifetime 60 unset ike ikeid-enumeration unset ike dos-protection unset ipsec access-session enable set ipsec access-session maximum 5000 set ipsec access-session upper-threshold 0 set ipsec access-session lower-threshold 0 set ipsec access-session dead-p2-sa-timeout 0 unset ipsec access-session log-error unset ipsec access-session info-exch-connected unset ipsec access-session use-error-log set url protocol websense exit set policy id 1 from "Trust" to "Untrust" "Any" "Any" "ANY" permit set policy id 1 exit set policy id 2 from "Wifi" to "Untrust" "Any" "Any" "ANY" permit log set policy id 2 exit set nsmgmt bulkcli reboot-timeout 60 set ssh version v2 set config lock timeout 5 unset license-key auto-update set telnet client enable set snmp port listen 161 set snmp port trap 162 set snmpv3 local-engine id "0162122009006149" set vrouter "untrust-vr" exit set vrouter "trust-vr" unset add-default-route set route 0.0.0.0/0 interface ethernet0/0 gateway 172.31.16.1 exit set vrouter "untrust-vr" exit set vrouter "trust-vr" exit

  Read the article

• How to jump through an IP ad in firefox?

  - by chris

  I use firefox with a lot of anti-ad extension, like adblock, NoScript, Ghosty etc. I found this IP 220.191.158.69 always in the list of NoScript, I want to ban this IP. I have checked it, searched it. It is from China telecom damn Ad. I guess NoScript can ban this IP already, but When I do not allow that IP, sometimes a webpage can not be loaded at first time, I need to refresh two or more times. I hate it... So I hope there are some way or browser extensions or script can jump through this damn IP.

  Read the article

• How can I use dynamic routing with openvpn tunnels?

  - by pQd

  i'm thinking about using dynamic routing [ OSPF or RIP ] via OpenVPN tunnels. right now i have few offices connected in full mesh, but this is not scalable solution as we add more locations. i would like to avoid situation when plenty of internal traffic is affected if one of two vpn termination points that i plan to use is down. do you have similar configuration working in production? if so - what routing daemon did you use - quagga? something else? did you encounter any problems? thanks!

  Read the article

• How to find ip address of my Asus RT-AC86U in Access Point mode?

  - by WilliamKF

  I'm using an Asus wireless router model RT-AC68U and can connect fine to the internet using it wirelessly. I configured the router to be an Access Point, but having done so, I can no longer locate the GUI to adjust the router as I have no idea what its IP Address is anymore. The router is plugged into a cable modem and router which is a model SMCD3G is a business class gateway labeled Comcast Business IP Gateway. This gateway is assigning ip addresses in the range 10.1.10.XX and I went to the web interface at 10.1.10.1 and listed the connected devices and see my laptop which is connected to the Asus access point along with a few other devices, but none of the devices listed are the Asus router (I tried all the six ip addresses listed). How can I determine the IP Address of my Asus router in access point mode so I can see the GUI interface again to control the router other than by doing a factory reset?

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39 40  | Next Page >