Search Results

Search found 956 results on 39 pages for 'samba'.

Page 33/39 | < Previous Page | 29 30 31 32 33 34 35 36 37 38 39  | Next Page >

• Ubuntu and mysql server. Something isnt allowing me to connect

  - by acidzombie24

  I have a question about mysql settings http://serverfault.com/questions/94054/remote-connections-and-mysql-on-ubuntu/94088#94088 now i want to figure out why i cannot connect. I made sure bind-address was commented out. I can ping the server within the VM but i cannot ping it from within the VM using mysqladmin --protocol=tcp --host=self_ip ping. I also followed along and check if my ports were open and they look like they are. I setup samba on that VM and can access that with no problem as well. It looks like ubuntu does not have a firewall either (i figured this out before) so i am stumped why the server isnt allowing my connection. Apparently the config file works on another person side http://www.pastie.org/742545 I am using Ubuntu 6.06 LTS just because of 'support' reasons. So hopefully this will be 'easy'?

  Read the article

• make my Ubuntu 12.04 laptop visible on the network

  - by Andrew Boyd

  I'm ecstatically happy with my 12.04 on my laptop after loading it over my MS Vista... but there's just one thing, one little fly in the ointment.... While I can view our 2 Terabyte, shared hard-drive in the lounge (and copy files back and forth) I can't see my PC (when I boot up in Ubuntu 12.04) nor the Lubuntu computer connected to the TV (for movies, Youtube etc). Printing to the HP office jet on the PC doesnt work over the network either. Have had one dubious flirtation with Samba, which seems to be the only thing I've found that will 'work', however halfway through that "installation" everything just ground to a halt, the directions began to stop making sense... I was working from this page. Our Network consists of the following: Our Internet service is wirelessly sent to us from our provider to our dish on a pole. It comes into the house via an ethernet cable. We split it there to a phone, and to 6 other destinations (bedrooms, computers, and to another splitter in the lounge which has a wifi antennae and 4 ethernet ports). one port goes to the Lubuntu OS PC which is connected to the TV the second port goes to the 2 Terabyte harddrive (MS powered 'Mybooklive') (the other two are empty) My Ubuntu 12.04 laptop connects wirelessly to this splitter in the lounge. I know just enough about computers to get myself into an awful mess without too much trouble We usually can view friends' laptops when they get on our network (as they are invariably MS OS's) Our flatmate, who introduced us to Linux's computer is also invisible How can we make our Linux OS based computers visible on the network and share files and printing?

  Read the article

• Mount a share on a Mac using a login hook

  - by Arcath

  I have a script that mounts a Samba share to a folder on the desktop, it runs no problem but when its setup as a LoginHook it doesn't mount the folder. Does anyone have a working login hook that mounts a share that they can post? Or know any issues with mounting shares during login? This is my Script: #!/usr/bin/env ruby @domain="Lancaster" @user=ARGV[0] #@[email protected](/\n/,"") @userfolder="/Users/" + @user.to_s @smbshare="//#{@user}@hercules/everyone" system("mkdir #{@userfolder}/Desktop/everyone") system("mount_smbfs #{@smbshare} #{@userfolder}/Desktop/everyone | #{@userfolde$ system(" /usr/bin/osascript <<-EOF tell application \"System Events\" activate display dialog \"Welcome to the #{@domain} domain #{@user}\n\nY$ end tell EOF ")

  Read the article

• Best way to keep configuration for server reinstallation?

  - by Gunnar

  I have a server at home running Ubuntu 12.04 which has grown messy over the years. I have fiddled with various packages, desktop environments (for VNC) etc. and I would like to reinstall it to start again, and have better control over what goes into the box. But I want to keep much of the configurations after reinstallation, like LVM configuration, apache2, samba, etc etc. There would ideally exist a program which could analyze /etc, installed packages and such, store the information, and selectively put it back into the new installation. I am even considering installing Ubuntu server on a virtual machine, just to be able to compare the contents of /etc with a clean installation, and even perform a migration to the virtual machine first, to verify that the transfer process works. How do one go about performing this kind of reinstallation? Have anyone seen any resources on the net on the topic?

  Read the article

• Cannot authenticate to SBS 2003

  - by Lerp

  I am trying to connect my machine to my work's entirely windows network and I am having a few issues: Whenever I try to access the server, the authentication dialog just keeps popping back up. I cannot connect to the printers (it says connecting to device failed) I have tried setting up samba, winbind, kerberos, likewise open all to no avail. I have a feeling I am just setting them up wrong. My nautilus shows this when I go to Network Windows Network MASTERMAGNETS I can ping both MASTERMAGNETS.LOCAL and 192.168.0.2 after modifying my /etc/hosts james@jamesmaddison:~$ cat /etc/hosts 127.0.0.1 localhost jamesmaddison 192.168.0.2 MASTERMAGNETS.LOCAL 192.168.0.50 Sharp-Printer # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters I believe that's the correct domain (not sure if that's the correct term) as when I do nslookup MASTERMAGNETS.LOCAL I get the following: james@jamesmaddison:~$ nslookup MASTERMAGNETS.LOCAL Server: 192.168.0.2 Address: 192.168.0.2#53 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.3 Name: MASTERMAGNETS.LOCAL Address: 192.168.0.2 It all worked fine before I reinstalled Ubuntu and now I just cannot get access to the server. All help is appreciated, I need to get this working or I fear I will be forced to develop in a windows environment :(

  Read the article

• How to calculate time spent for Linux system administration?

  - by Jaakko

  I would love figuring out how much time I actually have spent in shell performing administrative duties. For billing of course, this information is not sufficient, but it would be helpful to figure out how much time I have actually spent in shell. My question is: How anyone got tips on how to calculate time spent in shell (in hours + minutes), let's say per user account? Could anyone recommend a software that could be used to analyze this time? Optionally I would like to know about ways how to categorise time spent (e.g. 1 hour for Apache, 2 hours for Samba, etc.) Also, your takes on how you monitor your admin time, are also much appreciated! To narrow down the problem, I am specifically interested in ways of tracking time spent in shell for Linux system administration

  Read the article

• Using both domain users and local users for Squid authentication?

  - by Massimo

  I'm working on a Squid proxy which needs to authenticate users against an Active Directory domain; this works fine, Samba was correctly set up and Squid authenticates users via ntlm_auth. Relevant lines in squid.conf: auth_param ntlm program /usr/bin/ntlm_auth --helper-protocol=squid-2.5-ntlmssp auth_param ntlm children 5 auth_param ntlm keep_alive on acl Authenticated proxy_auth REQUIRED http_access allow Authenticated http_access deny all Now, I need a way to allow access to users which don't have a domain account. I know I could create an "internet user" account in the domain, but this would allow access, although limited, to domain resources (file shares, etc.); I need something that will allow only Internet access. The ideal solution would be using a local account on the proxy server, either a Linux account or a Squid one; I know Squid supports this, but I'm unable to have it use both domain authentication and Squid/local authentication if domain auth is unsuccesful. Can this be done? How?

  Read the article

• ESXI ftpput fails Syntax problem

  - by Datapimp23

  I'm trying to ftpput my virtual machines dirs to our NAS. Which doesn't support NFS. Only FTP and samba. So I'm in the ESXi console and enter the followin command ftpput ipaddress /vmfs/volumes/4a1157e1-be81171a-1b39-001d09080124/VMNAME /Backup /Backup is a public share on the nas, I can access it through any ftp client. After I enter I get the following ftpput: can't open 'Backup': No such file or directory I'm kind of in the dark here. Any suggestions?

  Read the article

• ubuntu box just redisplaying login screen after update

  - by David M. Karr

  My Ubuntu 12.04 box has been working fine. A recent update may have messed something up. I normally run remote windows on it, and I noticed that my windows were failing to start up. I then tried logging into it directly from the GUI console, and I'm seeing that after I press enter on the (valid) password, the page just redisplays. It's not a password error, as that would give me an inline error. I see some messages appear and disappear quickly between the login screen going away and then redisplaying, but they go away too quickly to read. I was able to run the non-gui login, and I did an update and upgrade, and then rebooted, but it's doing the same thing. I have a Samba connection from my Windows box, and that's still working. If it matters, here's my uname output (somewhat elided): Linux ... 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux What can I do to troubleshoot this? Note that when I select "Guest Session", it lets me log in and displays the window manager. This seems significant to me. Does this mean that something specific to my login is causing it to fail? Note: If it matters, here's the output from /var/log/dmesg. The line about gdm seems interesting: [ 9.815883] Bluetooth: RFCOMM TTY layer initialized [ 9.815887] Bluetooth: RFCOMM socket layer initialized [ 9.815888] Bluetooth: RFCOMM ver 1.11 [ 9.879088] [PCSPP,TRISTATE] [ 9.879092] parport0: irq 7 detected [ 9.883935] type=1400 audit(1341871177.871:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=845 comm="apparmor_parser" [ 9.884365] type=1400 audit(1341871177.871:11): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/ntpd" pid=851 comm="apparmor_parser" [ 9.950397] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 9.961160] init: gdm main process (907) killed by TERM signal [ 9.966358] lp0: using parport0 (polling).

  Read the article

• which drive do I mount

  - by Crash893

  I have a system hdd then two raid1 hard drives I see that sda1 is the system drive but when i do a fdisk -l I get the following results so which of the following do i need to mount to get the "raid" drive and not the individual hdd? root@Mxxxx-PDC:/etc/samba# fdisk -l Disk /dev/sda: 251.0 GB, 251000193024 bytes 255 heads, 63 sectors/track, 30515 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000762dc Device Boot Start End Blocks Id System /dev/sda1 * 1 30328 243609628+ 83 Linux /dev/sda2 30329 30515 1502077+ 5 Extended /dev/sda5 30329 30515 1502046 82 Linux swap / Solaris Disk /dev/sdb: 400.0 GB, 400088457216 bytes 255 heads, 63 sectors/track, 48641 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 48641 390708801 83 Linux Disk /dev/sdc: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x0009f4b2 Device Boot Start End Blocks Id System /dev/sdc1 * 1 255 2048256 fd Linux raid autodetect /dev/sdc2 256 30401 242147745 fd Linux raid autodetect Disk /dev/sdd: 250.0 GB, 250059350016 bytes 255 heads, 63 sectors/track, 30401 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000b7f4c Device Boot Start End Blocks Id System /dev/sdd1 * 1 255 2048256 fd Linux raid autodetect /dev/sdd2 256 30401 242147745 fd Linux raid autodetect

  Read the article

• Set default owner/user

  - by Daniel Hollands

  I'm a web developer, and so have set-up an old machine in the office as an Ubuntu Server, for the purposes of testing websites. I've set-up LAMP and have created a /var/www folder, from which all my local sites are served. The issue is that of user permissions, i.e. any files that I copy into that folder (from my Windows machine via the network) automatically take on me (daniel) as their owner. The problem is that I want www-data to become the owner. I did some research and saw that it should be possible to use setuid (and setgid) to automatically set www-data as the owner of all files put into /var/www automatically, so far I've not had any luck making it work. Can someone help please? Thank you UPDATE: Would this do what I want it to do? Default file permissions for php user www-data UPDATE 2: I've kinda fixed my issue by changing my samba settings. Using Webmin, I was able to go in and change the default settings (as seen here: http://imageshack.us/photo/my-images/521/captureon.png/)

  Read the article

• Home server - HP Proliant Microserver - Software and setup - OS on USB stick? [closed]

  - by Lloyd Watkin

  I've just purchased a HP ProLiant Microserver for home use. I want to set up with web server, samba shares, the usual stuff. My question is really about system setup. It has an internal USB socket so I've attempted to install a copy of Fedora 14 onto it. I turned off X/Gnome, but it still ran like a pig. I've now put the OS on one of the internal disks (250Gb, 7200rpm), but I was wondering if there was a way to utilise the internal USB to give me better power-saving allowing the hard drives to be shut down when not in use. How would you set this server up? I'd rather not go to the extra cost of an SSD right now, but if that's the best way then so be it.

  Read the article

• I've created a software RAID on SUSE EL 10 and now I need to monitor it.......

  - by Thomas B.

  I have created a Software Raid using the yast2 GUI on SUSE ES 10/11. The raid works great and it's a raid 5. I have 5 Drives they are cheap 2GB Cases that have 2 - 1TB Drives in each case (Serial ATA Drives) and I connect them in via Esata to the motherboard. The problem I have as this is "cheap" storage when of the the 5 drives goes out on the RAID I seem to have no logs of any issues and it get's harder and harder to write to it until it dies. I use SAMBA to mount the 4TB parition to my PC's in my home on a GIG network. My question is this, are there any good (Free) tools in Linux to monitor a raid or the drives on the raid to detect any problems??? I haven't found any yet and was just wondering if some exist.

  Read the article

• How do I force specific permissions for new files/folders on Linux file server?

  - by humble_coder

  I'm having an issue with my install of Ubuntu 9.10 (file server) and its samba permissions. Logging in and reading works fine. However, creation of new directories by users restricts access for other users. For instance, if Bob (Windows user who maps the drive) creates a folder in the directory, Jane (Mac user that simply smb mounts) can read from it, but can't write to it -- and vice versa. I then must go CHMOD 777 the directory for everyone to be happy. I've tried editing the "create/directory mask", and "force" options in the smb.conf file but this doesn't seem to help. I'm about to resort to CRONTABing a recursive chmod routine, although I'm sure this isn't the fix. How do I get all new items to always be 777? Does anyone have any suggestions to fix this ever-occurring situation? Best

  Read the article

• CIFS shares do not mount after upgrade to 12.10 from 12.04

  - by Mothball

  I have seen issues close to my problem but no one seems to have a definitive answer as to what is going on and why the failure occurs. I have a number of NAS devices on my home network and on a previous install of 12.04 and version prior mounting at login worked using this entry for each in fstab: //servername/sharename /media/windowsshare cifs guest,uid=1000,iocharset=utf8,codepage=cp850,cp850 0 0 Now when I use this, 12.10 reports the standard - cannot mount bad option ... blah blah... The kern log reports that the CIFS option "codepage" unknown... changed entry to "unicode" and received the same error message. There are no other error messages or log entries that would indicate another issue, but this is the statement I used for quite awhile with version 12.04 and before. Is the codepage option obsolete in 12.10/CIFS now? Is there a codepage support program that I must load? Is there some kind of helper program that is required to supports the codepage option? A current review of the man pages at samba.org does not make mention of the option "codepage". Extremely confused - any help/insight would be greatly appreciated.

  Read the article

• Cannot ssh anymore into FreeBSD 7.2 home server

  - by Gabi

  Somehow sshd stopped running and no amount of start, restart or onestart will make it go again. I normally ssh into it from a dual-boot laptop computer that shows up on the network as gabi-buntu when running Ubuntu Karmic, and as gabi-pc when running Windows XP Pro. Neither my Putty connection nor the Linux terminal can establish a ssh link anymore. Upon rebooting the server, I am greeted with "/etc/rc: WARNING: run_rc_command: cannot run /usr/sbin/sshd". In addition, a message will appear saying things like rpc.statd: failed to contact host gabi-buntu RPC: port mapper failure RPC: timed out Everything else works fine. The FreeBSD 7.2 box runs a print server, a Samba server, and an Apache server for the home wiki, via https. It also serves up NFS shares for Linux clients. Any suggestions? Thank you, Gabi Huiber

  Read the article

• How can I improve performance over SMB/CIFS for an application that has poor write speeds?

  - by Jeremy

  I have a third party application that reads several large files and generates a third large file. Its performance is quite good when the generated file is stored on "local storage", i.e. either a direct attached or iSCSI-based disk. The source files that are read can be stored remotely on our NAS and accessed via SMB with little effect on performance. However, if we attempt to write the target file to any kind of SMB/CIFS share (Samba or Windows Server) the performance drops almost ten-fold. This is unacceptably slow in our case. Writing files to network shares is not otherwise slow. I can copy large files to SMB shares and get great performance - near what I would expect is possible given the disks and network in question. I have a theory that this application's problem with SMB shares has something to do with a lack of write caching over the share and perhaps lots of network roundtrips. Is this possible and is there anything that can be done about it?

  Read the article

• Keep getting smbd errors, but apport asks questions I can't answer

  - by Steve Kroon

  What I want to know below is where to bug report the poor series of questions I'm being asked... Every time I reboot (at least), I get a crash dialog ("Sorry, Ubuntu 12.04 has experienced an internal error"). Clicking on show details shows the problem is with smbd, but the rest of the trace does not appear. When I wish to continue to send a bug report, I am told I will be asked a series of questions in a window titled "Apport". The first question asks: How would you best describe your setup? -I am running a Windows File Server -I am connecting to a Windows File Server. Since I am doing both, I have no idea which to choose. In any case, selecting one leads to the next question: Did this used to work properly with a previous release? -No -Yes But I never tried to use Samba in a previous release, so I can't seriously answer this. After picking an option here, I get more questions in a similar vein. Surely there should be "I don't know/I haven't tried" options, even if they simply mean you can't submit a useful bug report.

  Read the article

• Is it necessary to add an HP printer to CUPS using the hplip URI?

  - by JPbuntu

  I recently setup a CUPS print server (Ubuntu server 12.04) and I having trouble with performance of a HP Color LaserJet Printer CP3505n. The printer pauses for about a second between printing each page, which is annoying when there is a lot of printing to be done. This doesn't happen when the printer is installed directly to a Windows client. In an attempt to fix this I have setup the printer a couple different ways. I decided not to do a Samba share since this wiki said IPP is preferred. First Method Added to HP LaserJet to CUPS as a Discovered Network Printer, and selected HP Color LaserJet cp3505 hpijs pcl3, 3.12.2 (en) driver. I did not use a hplip URI. Second Method (hplip URI) I thought adding hplip to the mix might improve the performance, so I added the printer like this: Ran hp-setup -m 192.168.2.60, prompted to select driver Selected HP Color LaserJet cp3505 hpijs pcl3, 3.12.2 (en) Used hplip to generate a URI: hp-makeuri 192.168.2.60 Then added the printer to CUPS as a Local Printer: HP Printer (HPLIP), and entered: hp:/net/HP_Color_LaserJet_CP3505?ip=192.168.2.60. Either method I use I am able to share the printer on the network by adding a printer as http://192.168.2.2:631/printers/HP_LASER-TERRAC. Does it make a difference which way the printer is added cups? If so, and I install the printer with the hp URI, can I still change the driver using the CUPS web interface? I have been trying out different drivers to try and improve performance, and the cups interface is the easiest way to change them. Thanks in advance.

  Read the article

• Wine not finding some files

  - by Levans

  I'm having strange issues with Wine : If I look a C:\windows\system32\drivers\ in wine explorer, the directory looks empty, while the directory ~/.wine/drive_c/windows/system32/drivers is not. Plus, having the H: drive mapped to my home directory, I can look at H:\.wine\drive_c\windows\system32\drivers and it is not empty, the files are here ! Thus it seems Wine has the rights to access these files. So why don't they appear on the C: drive ? Some of my programs need them. I'm using Gentoo Linux, and Wine is version 1.7.0 compiled with these useflags (from eix) : X alsa cups fontconfig gecko jpeg lcms ldap mono mp3 ncurses nls openal opengl perl png prelink run-exes ssl threads truetype udisks xcomposite xinerama xml -capi -custom-cflags -dos -gphoto2 -gsm -gstreamer -odbc -opencl -osmesa -oss -pulseaudio -samba -scanner -selinux -test -v4l ABI_MIPS="-n32 -n64 -o32" ABI_X86="32 64 -x32" ELIBC="glibc" EDIT: I just updated to wine 1.7.4 and nothing changed.

  Read the article

• How would I batch rename a lot of files using command-line?

  - by Whisperity

  I have a problem which I am unable to solve: I need to rename a great dump of files using patterns. I tried using this, but I always get an error. I have a folder, inside with a lot of files. Running ls -1 | wc -l, it returns that I have like 160000 files inside. The problem is, that I wish to move these files to a Windows system, but most of them have characters like : and ? in them, which makes the file unaccessible on said Windows-based systems. (As a "do not solve but deal with" method, I tried booting up a LiveCD on the Windows system and moving the files using the live OS. Under that Ubuntu, the files were readable and writable on the mounted NTFS partition, but when I booted back on Windows, it showed that the file is there but Windows was unable to access it in any fashion: rename, delete or open.) I tried running rename 's/\:/_' * inside the folder, but I got Argument list too long error. Some search revealed that it happens because I have so many files, and then I arrived here. The problem is that I don't know how to alter the command to suit my needs, as I always end up having various errors like Trying find -name '*:*' | xargs rename : _, it gives xargs: unmatched single quote; by default quotes are special to xargs unless you use the -0 option [\n] syntax error at (eval 1) line 1, near ":" [\n] xargs: rename: exited with status 255; aborting Adding the -0 after xargs turns the error message to xargs: argument line too long These files are archive files generated by various PHP scripts. The best solution would be having a chance to rename them before they are moved to Windows, but if there is no way to do it, we might have a way to rename the files while they are moved to Windows. I use samba and proftpd to move the files. Unfortunately, graphical software are out of the question as the server containing the files is what it is, a server, with only command-line interface.

  Read the article

• Why does the Mac OS X (10.6) Finder stop being able to connect to Windows computers?

  - by Drarok

  We have one Mac (a MacBook Pro Unibody) amongst our Windows machines which connects to the "server" (actually a Dell running Windows XP Pro) to access documents. This works just fine most of the time, but sometimes after waking from sleep, it cannot connect to any Windows computer on the network. There are no errors (nor even any messages) in the Console application when attempting to connect either by the Finder's network browsing, nor when using the "Connect To Server" menu. I have tried "Relaunch" on Finder, toggled File Sharing, disabled and re-enabled the Airport, but nothing makes the Mac able to connect again until I reboot it! Other computers can connect to the machines, so it is definitely the Mac at fault. Are there any workarounds that anyone has found? Is there perhaps a way to re-start the samba client?

  Read the article

• VMware 1.0.1 Windows7 - Ubuntu hostnames

  - by Kyle K

  I'm trying to run Ubuntu as the guest OS using VMWware 1.0.10 with Windows 7 Ultimate as the host OS. I had this set up previously with Win XP as the host OS and in fact I'm using the same .vmx My problem is I can't get either Win7 or Ubuntu to be able to ping the other by hostname. After installing Samba and Winbind on Ubuntu, I was able to get this working when under WinXP, but for some reason I can't get it to work under Win7. I can ping by IP Address, and the guest OS even shows up by hostname under the Windows networking panel (but of course I can't do anything with it), but pinging using short hostnames just won't work. Also, Win7 firewall is turned off completely.

  Read the article

• How to let users change linux password from web browser?

  - by wag2639

  I'm not sure if this is a stackoverflow question or serverfault but here goes: I have an Ubuntu 10.04 file server (Samba/FTP/HTTP) and I would like to have the ability to give users the ability to change their password to the server using their web browser. I've written a similar script before using PHP and a mess of exec but I believe that isn't secure because it can be listened to by someone looking at the list of processes on the server. Is there some kind of plugin (PHP or Python or other) that can do this easily? I rather not use something like webmin as it's overkill for this.

  Read the article

• How can I share files from my Windows 7 machine to my friend's Ubuntu machine?

  - by ProfKaos

  I run a Windows 7 Pro SP1 laptop as my home machine, and my housemate runs an Ubuntu 12.04.1.05 desktop. We share a WLAN. I would like to make certain locations and files available for him to read and maybe write. How can I go about this? Bearing in mind I have very little recent experience with modern Linux, and Ubuntu in particular. My first idea is to share a Windows folder with my Ubuntu VM under VMWare Player, then his Ubuntu machine can connect to my Unbuntu VM, and the two can use whatever magic Ubuntu uses to achieve file sharing. This requires my Ubuntu VM to be always running though, and that may not always be possible. I have also heard that Samba may have a feature to help here, but I know nothing about that. How can I share my Windows files with my mate's Ubuntu machine, preferably with a 1 to 1 connection, i.e. rather not using shim VM's

  Read the article

< Previous Page | 29 30 31 32 33 34 35 36 37 38 39  | Next Page >