Search Results

Search found 40730 results on 1630 pages for 'type erasure'.

Page 335/1630 | < Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342 | Next Page >

Is there any difference between processor and core?

- by Salvador

The following two command seems to give me different information about the same hardware srs@ubuntu:~$ cat /proc/cpuinfo | grep -e processor -e cores processor : 0 cpu cores : 4 processor : 1 cpu cores : 4 processor : 2 cpu cores : 4 processor : 3 cpu cores : 4 srs@ubuntu:~$ sudo dmidecode -t processor # dmidecode 2.9 SMBIOS 2.6 present. Handle 0x0004, DMI type 4, 42 bytes Processor Information Socket Designation: LGA1155 Type: Central Processor Family: <OUT OF SPEC> Manufacturer: Intel ID: A7 06 02 00 FF FB EB BF Version: Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz Voltage: 1.0 V External Clock: 100 MHz Max Speed: 3800 MHz Current Speed: 3300 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 4 Core Enabled: 1 Characteristics: 64-bit capable Until today I thought I had a single processor with 4 independent cores. I also thought that within each core can be used different threads.

Read the article
How to make the emacs not to pop up a window when using tab-completion?

- by Jinx

When I use the emacs shell mode or in gdb, when I type double tab, the emacs pop up a new window which always cover an existed window. While in terminal, when I type double tab, to complete a directory, the terminal just print all the candidates in the same window. Can I make the emacs not to pop up a new window when I use this feature? edit this is I wanna do , but it's wrong, can somebody fix this? ;remove annoying poped-up windows (defun rm-popup-window () (other-window) (kill-this-buffer) (other-window) ) (global-set-key [C-'] 'rm-popup-window);

Read the article
Many sources of movement in an entity system

- by Sticky

I'm fairly new to the idea of entity systems, having read a bunch of stuff (most usefully, this great blog and this answer). Though I'm having a little trouble understanding how something as simple as being able to manipualate the position of an object by an undefined number of sources. That is, I have my entity, which has a position component. I then have some event in the game which tells this entity to move a given distance, in a given time. These events can happen at any time, and will have different values for position and time. The result is that they'd be compounded together. In a traditional OO solution, I'd have some sort of MoveBy class, that contains the distance/time, and an array of those inside my game object class. Each frame, I'd iterate through all the MoveBy, and apply it to the position. If a MoveBy has reached its finish time, remove it from the array. With the entity system, I'm a little confused as how I should replicate this sort of behavior. If there were just one of these at a time, instead of being able to compound them together, it'd be fairly straightforward (I believe) and look something like this: PositionComponent containing x, y MoveByComponent containing x, y, time Entity which has both a PositionComponent and a MoveByComponent MoveBySystem that looks for an entity with both these components, and adds the value of MoveByComponent to the PositionComponent. When the time is reached, it removes the component from that entity. I'm a bit confused as to how I'd do the same thing with many move by's. My initial thoughts are that I would have: PositionComponent, MoveByComponent the same as above MoveByCollectionComponent which contains an array of MoveByComponents MoveByCollectionSystem that looks for an entity with a PositionComponent and a MoveByCollectionComponent, iterating through the MoveByComponents inside it, applying/removing as necessary. I guess this is a more general problem, of having many of the same component, and wanting a corresponding system to act on each one. My entities contain their components inside a hash of component type - component, so strictly have only 1 component of a particular type per entity. Is this the right way to be looking at this? Should an entity only ever have one component of a given type at all times?

Read the article
ext4 hogs lot of unkown space compared to ext3

- by rejith

Ext4 FS has claimed 3% of partition space. Where has this gone and can I get it reclaimed? I have tried disabling Journals for the ext4 partition. Even this is not helping. Any other tricks I can try to get the space reclaimed other than reverting back to ext3? $ lsb_release -cr Release: 12.04 Codename: precise df -hP |grep media /dev/sda3 21G 430M 20G 3% /media/MAIL /dev/sda2 148G 188M 148G 1% /media/DATA => if I move this to ext4 its claiming 2.4G /dev/sda3 on /media/MAIL type ext4 (rw,nosuid,nodev,uhelper=udisks) /dev/sda2 on /media/DATA type ext3 (rw,nosuid,nodev,uhelper=udisks) $ sudo tune2fs -l /dev/sda3 |grep 'Reserved block count' Reserved block count: 0 $ sudo tune2fs -l /dev/sda2 |grep 'Reserved block count' Reserved block count: 0 NO hidden files or directories $ sudo du -ah *;pwd 16K lost+found /media/MAIL

Read the article
Sales tracker that allows complex queries?

- by feklee

On a site, every click on a product should be registered by a sales tracker: price, type, etc. The sales tracker should provide an API so that complex queries can be performed, such as: Which products of a type "teapot" had a price below 20 EUR? Requirements: Recorded data should be available for querying no later than two hours after it has been recorded. For example, there are reports that Google Analytics may take up to 24h to update data. That is not acceptable. Querying doesn't need to be fast, but recording does (of course). Which sales tracker allows complex queries against collected data?

Read the article
How to reduce tight coupling between two data sources

- by fstuijt

I'm having some trouble finding a proper solution to the following architecture problem. In our setting (sketched below) we have 2 data sources, where data source A is the primary source for items of type Foo. A secondary data source exists which can be used to retrieve additional information on a Foo; however this information does not always exist. Furthermore, data source A can be used to retrieve items of type Bar. However, each Bar refers to a Foo. The difficulty here is that each Bar should refer to a Foo which, if available, also contains the information as augmented by data source B. My question is: how to remove the tight coupling between data source A and B?

Read the article
Do subdomains need to be defined through domain registrar?

- by Johnny

I have bought a new domain name from GoDaddy. Let's say it is abcd.com. On GoDaddy's DNS Managing page, I changed A(Host) part to @ = 74.125.232.215 which is www.google.co.uk's IP address. Now if I type www.abcd.com, it directly goes to www.google.co.uk. But if I type http://test.abcd.com, it cannot be loaded. Do I need to define every subdomain through GoDaddy? Is this how it works? P.S. Amazon EC2 directly generates a subdomain for users to reach their virtual PCs. It cannot be domain registrar dependant. P.S.2. Same question for using "www2" at the start of url.

Read the article
Text box select issue

- by Kent Boogaart

I have this issue where the entire text in text boxes is selected whilst I'm typing in it. For example, in FireFox search box I'd try to type "foo" but end up with "o" because I managed to type "fo" before everything was selected, and then typed "o" which replaced the "fo". When it happens, it is incessant - not just a one-off. But it doesn't happen all the time, and I haven't managed to figure out what causes it to start and stop. Is this a known problem with an easy solution? EDIT: this has nothing to do with touchpad. I get this occasionally even on a machine without one. I can usually rectify the issue just be alt-tabbing about a few times.

Read the article
Upcoming Customer WebCast: SOA 11g Database: Guide for Administrators

- by MariaSalzberger

The SOA infrastructure database is used by SOA Suite products like BPEL PM, BAM, BPM, Human Worklow, B2B and Mediator. A SOA administrator is involved in many different tasks like installation, upgrade, performance tuning and other administrative topics. Another important one is purging - see the posting for this: SOA Suite 11g Purging Guide. We have implemented a guide to help with thess tasks: SOA 11g Infrastructure Database: Installation, Maintenance and Administration Guide. An upcoming advisor webcast planned for Wednesday, April 11 2012 at 15:00 UK / 16:00 CET / 07:00 am Pacific / 8:00 am Mountain / 10:00 am Eastern will walk you through the guide and show some of the highligts. Registration for this webcast is available in SOA 11g Database: Guide for Administrators [ID 1422913.1]. The presentation recording can by found here after the webcast. (https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=ANNOUNCEMENT&id=740964.1) The schedule for future webcasts can be found here (https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&doctype=ANNOUNCEMENT&id=740966.1)

Read the article
Google won't display site

- by Markasoftware

My website (markasoftware.getenjoyment.net) doesn't seem to be indexed properly by Google (I haven't tried other search engines). When I type in the URL of my site it appears right at the top of the list like it should. When I type in the entire contents of the title, however, the site doesn't appear! The title is quite long (Thermonuclear War Game Online: Thermonuclear War By Mark) and it has little (if any) competition. Have I been punished by Google for some reason, or is it something else? I have received zero hits from search engines. Can someone tell me why my site down't appear?

Read the article
How do I create a file?

- by Shira

Hi, I'm following instructions about Installing and setting TFTPD in Ubuntu. It asks to Create /etc/xinetd.d/tftp and put this entry: service tftp { protocol = udp port = 69 socket_type = dgram wait = yes user = nobody server = /usr/sbin/in.tftpd server_args = /tftpboot disable = no } What does it mean to create? Is there any command I need to type? And "put this entry" - it means to type in one line all the lines above? I don't know Linux & I need your help please.

Read the article
LL(8) and left-recursion

- by Peregring-lk

I want to understand the relation between LL/LR grammars and the left-recursion problem (for any question I know parcially the answer, but I ask them as I don't know nothing, because I am a little confused now, and prefer complete answers) I'm happy with sintetized or short and direct answers (or just links solving it unambiguously): What type of language isn't LL(8) languages? LL(K) and LL(8) have problems with left-recursion? Or only LL(k) parsers? LALR(1) parser have troubles with left or right recursion? What type of troubles? Only in terms of the LL/LALR comparision. What is better, Bison (LALR(1)) or Boost.Spirit (LL(8))? (Let's suppose other features of them are irrelevant in this question) Why GCC use a (hand-made) LL(8) parser? Only for the "handling-error" problem?

Read the article
trouble detecing huawei EC156 in ubuntu 12.04

- by naina

the data card is never detected automatically...its detected only when i fire a lsusb. Later i give modeswitch commands etc etc...then the device works fine..i can easily use internet...but once i disconnect from the net, its impossible to reestablish the connection...to reconnect i have to type all the commands, starting with lsusb, in the terminal again..ie every time i want a connection i have to sit and type 5-6 commands in the terminal before i can get through. what can be done to get automatic net connection as soon as i plug in the data card...please help...

Read the article
Space invaders clone not moving properly

- by ThePlan

I'm trying to make a basic space invaders clone in allegro 5, I've got my game set up, basic events and such, here is the code: #include <allegro5/allegro.h> #include <allegro5/allegro_image.h> #include <allegro5/allegro_primitives.h> #include <allegro5/allegro_font.h> #include <allegro5/allegro_ttf.h> #include "Entity.h" // GLOBALS ========================================== const int width = 500; const int height = 500; const int imgsize = 3; bool key[5] = {false, false, false, false, false}; bool running = true; bool draw = true; // FUNCTIONS ======================================== void initSpaceship(Spaceship &ship); void moveSpaceshipRight(Spaceship &ship); void moveSpaceshipLeft(Spaceship &ship); void initInvader(Invader &invader); void moveInvaderRight(Invader &invader); void moveInvaderLeft(Invader &invader); void initBullet(Bullet &bullet); void fireBullet(); void doCollision(); void updateInvaders(); void drawText(); enum key_t { UP, DOWN, LEFT, RIGHT, SPACE }; enum source_t { INVADER, DEFENDER }; int main(void) { if(!al_init()) { return -1; } Spaceship ship; Invader invader; Bullet bullet; al_init_image_addon(); al_install_keyboard(); al_init_font_addon(); al_init_ttf_addon(); ALLEGRO_DISPLAY *display = al_create_display(width, height); ALLEGRO_EVENT_QUEUE *event_queue = al_create_event_queue(); ALLEGRO_TIMER *timer = al_create_timer(1.0 / 60); ALLEGRO_BITMAP *images[imgsize]; ALLEGRO_FONT *font1 = al_load_font("arial.ttf", 20, 0); al_register_event_source(event_queue, al_get_keyboard_event_source()); al_register_event_source(event_queue, al_get_display_event_source(display)); al_register_event_source(event_queue, al_get_timer_event_source(timer)); images[0] = al_load_bitmap("defender.bmp"); images[1] = al_load_bitmap("invader.bmp"); images[2] = al_load_bitmap("explosion.bmp"); al_convert_mask_to_alpha(images[0], al_map_rgb(0, 0, 0)); al_convert_mask_to_alpha(images[1], al_map_rgb(0, 0, 0)); al_convert_mask_to_alpha(images[2], al_map_rgb(0, 0, 0)); initSpaceship(ship); initBullet(bullet); initInvader(invader); al_start_timer(timer); while(running) { ALLEGRO_EVENT ev; al_wait_for_event(event_queue, &ev); if(ev.type == ALLEGRO_EVENT_TIMER) { draw = true; if(key[RIGHT] == true) moveSpaceshipRight(ship); if(key[LEFT] == true) moveSpaceshipLeft(ship); } else if(ev.type == ALLEGRO_EVENT_DISPLAY_CLOSE) running = false; else if(ev.type == ALLEGRO_EVENT_KEY_DOWN) { switch(ev.keyboard.keycode) { case ALLEGRO_KEY_ESCAPE: running = false; break; case ALLEGRO_KEY_LEFT: key[LEFT] = true; break; case ALLEGRO_KEY_RIGHT: key[RIGHT] = true; break; case ALLEGRO_KEY_SPACE: key[SPACE] = true; break; } } else if(ev.type == ALLEGRO_KEY_UP) { switch(ev.keyboard.keycode) { case ALLEGRO_KEY_LEFT: key[LEFT] = false; break; case ALLEGRO_KEY_RIGHT: key[RIGHT] = false; break; case ALLEGRO_KEY_SPACE: key[SPACE] = false; break; } } if(draw && al_is_event_queue_empty(event_queue)) { draw = false; al_draw_bitmap(images[0], ship.pos_x, ship.pos_y, 0); al_flip_display(); al_clear_to_color(al_map_rgb(0, 0, 0)); } } al_destroy_font(font1); al_destroy_event_queue(event_queue); al_destroy_timer(timer); for(int i = 0; i < imgsize; i++) al_destroy_bitmap(images[i]); al_destroy_display(display); } // FUNCTION LOGIC ====================================== void initSpaceship(Spaceship &ship) { ship.lives = 3; ship.speed = 2; ship.pos_x = width / 2; ship.pos_y = height - 20; } void initInvader(Invader &invader) { invader.health = 100; invader.count = 40; invader.speed = 0.5; invader.pos_x = 300; invader.pos_y = 300; } void initBullet(Bullet &bullet) { bullet.speed = 10; } void moveSpaceshipRight(Spaceship &ship) { ship.pos_x += ship.speed; if(ship.pos_x >= width) ship.pos_x = width-30; } void moveSpaceshipLeft(Spaceship &ship) { ship.pos_x -= ship.speed; if(ship.pos_x <= 0) ship.pos_x = 0+30; } However it's not behaving the way I want it to behave, in fact the behavior for the ship movement is un-normal. Basically I specified that the ship only moves when the right/left key is down, however the ship is moving constantly to the direction of the key pressed, it never stops although it should only move while my key is down. Even more weird behavior, when I press the opposite key the ship completely stops no matter what else I press. What's wrong with the code? Why does the ship move constantly even after I specified it only moves when a key is down?

Read the article
Efficient way to check for changes to the contents of folders

- by MrVimes

I am creating an application that maintains a database of files of a certain type in a given folder (and all subfolders) Initially the program will recurse the folders and add any file it finds of that type to the database. I want the application to have the ability to re-scan the folder and add any files that were not there the last time the folders were scanned. It can't use the date created property of the file because there is a high chance of a file being added to the folders that isn't a new file. I am wondering what the most efficient way of doing this is, and if there is a way that doesn't involve checking each file is in the database already (which, if there are 5000 files would mean 5000 queries of a list 5000 items in size, or 25 million 'checks' for the sql engine to perform) I suppose a more specific question to acheive the same goal would be - is there a property of a file (in Microsoft Windows) that will reliably tell you when that file arrived in that folder.

Read the article
Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

- by jgottula

I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

Read the article
How to change icons of specific file types on Ubuntu 11.10?

- by Curious Apprentice

I want to change file icons of some specific file types like- .html, .css etc. I have tried using "File Type Editor (assogiate)" which is not working. I have also tried using "Gnome Tweak Tool" using icon themes. But that also does not worked properly (Though I can change folder icons , dash menu icons but not file icons). Please suggest me a way so that I can change file icons properly. I have read some of the articles saying about some mime type changes. I could not get proper guide from any of those articles. If there is such a way then please write in detail. Many Many Thanks in Advance :)

Read the article
How do I change my PYTHONPATH to make 3,2 my default Python instead of 2.7.2?

- by max

I have python3.2 located in /usr/lib/python3.2. I am not sure if that means it's installed but I assume it is for now. Some facts about my system: $ which python /usr/local/bin/python When I type python in terminal I get the following $ python Python 2.7.2 (default, Dec 19 2011, 11:12:13) [GCC 4.4.3] on linux2 Type "help", "copyright", "credits" or "license" for more information. Then to find the path I do >>> sys.info >>> sys.path ['', '/usr/local/lib/python2.7/site-packages/setuptools-0.6c11-py2.7.egg', '/usr/local/lib/python2.7/site-packages/pip-1.0.2-py2.7.egg', '/usr/local/lib/python2.7/site-packages/PIL-1.1.7-py2.7-linux-x86_64.egg', '/usr/local/lib/python27.zip', '/usr/local/lib/python2.7', '/usr/local/lib/python2.7/plat-linux2', '/usr/local/lib/python2.7/lib-tk', '/usr/local/lib/python2.7/lib-old', '/usr/local/lib/python2.7/lib-dynload', '/usr/local/lib/python2.7/site-packages'] So knowing all of this, how do I change my default system python from 2.7.2 to 3.2?

Read the article
Mounting ddrescue image after recovery (in over my head)

- by BorgDomination

I'm having problems mounting the recovery image. I've tried to mount the image multiple ways. quark@DS9 ~ $ sudo mount -t ext4 /media/jump1/1recover/sdb1.img /mnt mount: wrong fs type, bad option, bad superblock on /dev/loop0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so quark@DS9 ~ $ sudo mount -r -o loop /media/jump1/1recover/sdb1.img recover mount: you must specify the filesystem type quark@DS9 ~ $ sudo mount /media/jump1/1recover/sdb1.img mnt mount: you must specify the filesystem type It doesn't even give me detailed information on the file I just made, nautilus says it's 160gb. quark@DS9 ~ $ file /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img: data quark@DS9 ~ $ mmls /media/jump1/1recover/sdb1.img Cannot determine partition type I'm not sure what I'm doing wrong or if I started this process incorrectly from the beginning. I've outlined what I've done so far below. I'm clueless, I'd appreciate if someone had some input for me. What I have done from the beginning My laptop has two hard drives. One has the dual boot Win7 / Linux Mint system files. Secondary one contained my /home folder. The laptop was jarred and the /home disk was broken. I tried a LiveCD recovery, it failed. Wouldn't even load a Live session with the disk installed. So I turned to ddrescue. quark@DS9 ~ $ sudo fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009fc18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 112642047 56320000 7 HPFS/NTFS/exFAT /dev/sda2 138033152 312580095 87273472 83 Linux /dev/sda3 112644094 138033151 12694529 5 Extended /dev/sda5 112644096 132173823 9764864 83 Linux /dev/sda6 132175872 138033151 2928640 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdb: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0002a8ea Device Boot Start End Blocks Id System /dev/sdb1 * 63 312576704 156288321 83 Linux Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xed6d054b Device Boot Start End Blocks Id System /dev/sdc1 63 1953520064 976760001 7 HPFS/NTFS/exFAT sda - 160g internal, holds all system files and all computer functions. sdb - 160g internal, BROKEN, contains about 140g of data I'd like to recover. sdc - 1T external, contains recovery image. Only place that has space to do all this. From this site, https://apps.education.ucsb.edu/wiki/Ddrescue I used this script to create an image of the broken hard drive. I changed the destination to the external USB drive. #!/bin/sh prt=sdb1 src=/dev/$prt dst=/media/jump1/1recover/$prt.img log=$dst.log sudo time ddrescue --no-split $src $dst $log sudo time ddrescue --direct --max-retries=3 $src $dst $log sudo time ddrescue --direct --retrim --max-retries=3 $src $dst $log Everything looked like it came off without a hitch: quark@DS9 ~ $ sudo bash recover1 Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 0 B, errsize: 0 B, errors: 0 Current status rescued: 160039 MB, errsize: 4096 B, current rate: 35588 B/s ipos: 3584 B, errors: 1, average rate: 22859 kB/s opos: 3584 B, time from last successful read: 0 s Finished 12.78user 1060.42system 1:56:41elapsed 15%CPU (0avgtext+0avgdata 4944maxresident)k 312580958inputs+0outputs (1major+601minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 4096 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 13 B/s opos: 1536 B, time from last successful read: 1.3 m Finished 0.00user 0.00system 3:43.95elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 238inputs+0outputs (3major+374minor)pagefaults 0swaps Press Ctrl-C to interrupt Initial status (read from logfile) rescued: 160039 MB, errsize: 1024 B, errors: 1 Current status rescued: 160039 MB, errsize: 1024 B, current rate: 0 B/s ipos: 1536 B, errors: 1, average rate: 0 B/s opos: 1536 B, time from last successful read: 3.7 m Finished 0.00user 0.00system 3:43.56elapsed 0%CPU (0avgtext+0avgdata 4944maxresident)k 8inputs+0outputs (0major+376minor)pagefaults 0swaps It looks like, from where I'm standing it worked perfectly. Here's the log: # Rescue Logfile. Created by GNU ddrescue version 1.14 # Command line: ddrescue --direct --retrim --max-retries=3 /dev/sdb1 /media/jump1/1recover/sdb1.img /media/jump1/1recover/sdb1.img.log # current_pos current_status 0x00000600 + # pos size status 0x00000000 0x00000400 + 0x00000400 0x00000400 - 0x00000800 0x254314FC00 + I'm not sure how to proceed. Does this mean all of my data is lost???????? Appreciate ANY input!

Read the article
How best to take a users signature online? (UK law orientated) [closed]

- by Ben Griffiths

Not sure if this is the best place to ask, but I can't seem to find any of the other SE sites that would fit better (unless there's a law one?) I'm building an application that will replace an existing paper based form, and this form would normally be signed by the person filling it in. Looking around, it's hard to find a good definitive resource to explain what I can and cannot accept as far as a signature goes. It looks like some UK government online forms accept just your name typed into a box, but I've also heard you should back up with an email - so that process would be type name into a box along with providing an email address, send out an email, then make them click a link within the email to finally complete the verification. Involving email seems very long winded and leaves the system open to spam filters blocking emails, forgotten emails that just sit in inbox's etc. So, does anyone have any knowledge in this department? Personally, I'd love to just get them to type their name into a box and be done with it!

Read the article
How can be data oriented programming applied for GUI system?

- by Miro

I've just learned basics of Data oriented programming design, but I'm not very familiar with that yet. I've also read Pitfalls of Object Oriented Programming GCAP 09. It seems that data oriented programming is much better idea for games, than OOP. I'm just creating my own GUI system and it's completely OOP. I'm thinking if is data oriented programming design applicable for structured things like GUI. The main problem I see is that every type widget has different data, so I can hardly group them into arrays. Also every type of widget renders differently so I still need to call virtual functions.

Read the article
Chrome Countdown Extension [migrated]

- by Mike Saffold

I have modified this countdown script to countdown to 4:20pm everyday. I have attempted to create a Google Chrome app that displays the countdown. The javascript is supposed replace a paragraph tag with id of "note" with the time left. It works when I load the page in chrome, but does not work when I load the extension. Example, if I put: <p id="note">asdf</a> I get just the text, "asdf", but when I open the html file I get the countdown. Here is the manifest.json file: { "name": "My First Extension", "version": "1.0", "manifest_version": 2, "description": "The first extension that I made.", "browser_action": { "default_icon": "icon.png", "default_popup": "popup.html" } } Here is the popup.html code: <html> <head> <title>4:20PM Countdown</title>  <link rel="stylesheet" href="http://fonts.googleapis.com/css?family=Open+Sans+Condensed:300" /> <link rel="stylesheet" href="http://treesmoke.com/cd/assets/css/styles.css" /> <link rel="stylesheet" href="http://treesmoke.com/cd/assets/countdown/jquery.countdown.css" /> </head> <body> <p id="note">asdf</p>  <script type="text/javascript" src="http://code.jquery.com/jquery-1.7.1.min.js"></script> <script type="text/javascript" src="http://treesmoke.com/cd/assets/countdown/jquery.countdown.js"></script> <script type="text/javascript" src="http://treesmoke.com/cd/assets/js/script.js"></script> </body> </html> Here's the popup.html page, showing that the script works. Thanks guys, it isn't that big of a deal if I can't get it to work. I was just bored and decided to learn a little.

Read the article
Unstable Wifi and Spontaneous Low-graphic Error with Pavilion DV4

- by Constant Dean

I've been having numerous problems with connectivity through WiFi. It had been working for a few days and now it doesn't. On top of that around 40% of every time I turn on the laptop it shows "System running in low-graphics" error and I'm unable to view the desktop (sometimes not even able to access terminal), therefore having to manually power-down until it finally works. I use Ubuntu 12.10. nm-tool NetworkManager Tool State: connected (global) - Device: eth0 [Wired connection 1] ------------------------------------------- Type: Wired Driver: r8169 State: connected Default: yes HW Address: 84:34:97:6B:2E:D7 Capabilities: Carrier Detect: yes Speed: 10 Mb/s Wired Properties Carrier: on IPv4 Settings: Address: 192.168.1.10 Prefix: 24 (255.255.255.0) Gateway: 192.168.1.1 DNS: 192.168.1.1 DNS: 68.237.161.12 - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: rt2800pci State: unavailable Default: no HW Address: 68:94:23:50:A5:D9 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points

Read the article
Can not use keyboard on unity

- by ikhsan

Dear Ubuntu Community, currently I am using Ubuntu 14.04, and few hours ago, an update notifier prompted to install an update. After update finished, it ask for system restart, I think there is some kernel update etc. The problem start after restart, I can type password when login, but after entering unity desktop, my keyboard become suddenly unusable, system doesn't respond to any key press, after few minutes, it lock the screen automatically, but still I can't type password to unlock the screen. I tried to logout (mouse is working properly), and login again, try starting onscreen keyboard, but still have no luck, system still doesn't respond to the key press. I tried to login in console, and keyboard working well, tried to install xfce, and keyboard also working properly, keyboard also working properly when login to unity as guest, it only not working when I login using my account. I also try to reset unity config via unity-tweak-tool --reset-unity , but still no luck any suggestion to resolve this?

Read the article
Ubuntu Wifi Not Connecting (And keeps asking for authentication every minute or so)

- by kelvinsong

This is a problem in 12.10 that has been driving me nuts, and it's a problem with the wifi. Ubuntu will never connect to the network. All of my other devices work fine. What will happen is I will type in the password, the authentication window will go away, and the Wifi icon will pulsate for a while. Then about a minute later, a window will pop up asking for authentication to join the same wifi network. If you type in the password again it will do the same thing, and even if you hit [Cancel], the window will still pop back up in another minute. This is a very irritating thing.

Read the article

< Previous Page | 331 332 333 334 335 336 337 338 339 340 341 342 | Next Page >