Search Results

Search found 14598 results on 584 pages for 'address'.

Page 339/584 | < Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >

• PCs using certain IP addresses cannot ping out

  - by Steve McCall

  I'm having a very strange problem which I just can't get past. The way our network is set up, we have 2 locations. The main office with all our PCs, and servers/ We are then joined to a local ISP via microwave link and they provide our internet gateway and house an additional storage server for us. All of the network infrastructure is within our office The problem is... When some PCs (and servers) are assigned IP addresses, they cannot ping the gateway or remote server however the remote server can ping the PC. Most of our internal IP addresses work fine but specific ones (e.g. .29) has this problem all the time. There is nothing else using the ip address and no other network problems. When we switch the IP on the PC, it works fine. Please help, I'm going mad. Thanks, Steve

  Read the article

• Configure static IP with port number which will point to multiple projects on different ports

  - by Yogesh Kadam

  I am developing a project in LAM* and using the Symfony framework. I have one static IP like 99.99.99.99:8000 which points on my Linux server machine. This static IP already has port number of 8000. This Linux server machine has multiple project hosted on it and we access each project in LAN with different port number like abc:81, pqr:82, xyz:83. Is is possible to access each project on same Linux machine by this static IP? If yes then please let me know how to configure and call each project using this IP address.

  Read the article

• DHCP request error. Send_packet now permitted, How to debug, What does it mean

  - by Sparsh Gupta

  Hello I recently installed CSF firewall and have made live a new server which is accepting around 600req/second. Its basically a reverse proxy and I found in pingdom and munin that for a particular time, the response times of the server increased by 3 folds. I looked into logs and exactly at that point, I found loads of entries like this: Feb 27 15:22:09 li235-57 dhclient: DHCPREQUEST of <My IP address> on eth0 to 207.192.68.72 port 67 Feb 27 15:22:09 li235-57 dhclient: send_packet: Operation not permitted Can you help me understand what went wrong and what exactly happened. Is there any settings I should change in CSF or any pointer to debug this further Thanks

  Read the article

• Trying to administer network setting of server via netsh

  - by Jaime

  Hi there, I am trying to configure the LAN settings of a Windows 2008 server remotely via netsh. I've been trying this command (issued at the client) assuming the IP address of the server is 192.168.0.1: netsh -r 192.168.0.1 -u 192.168.0.1\Administrator -p password lan show config but I keep getting the following message: WARNING: Could not obtain host information from machine [192.168.0.1]. Some commands may not be available. The RPC server is unavailable. Am I understanding the command above properly? Is there a step or two that I missed in setting this up? Thanks in advance. P.S. The Routing and Remove Access service on the server is enabled.

  Read the article

• Virtualbox, Virtual guest OS issue

  - by user70370

  Hi, My host OS is: Ubuntu 10.10. One of my virtual OS is: Ubuntu 9.04 and another one is: Ubuntu 10.04. All of these virtualisation has been completed with Virtualbox. Now, I need to replicate those two servers, one server is running in Ubuntu 9.04 and another one is running in Ubuntu 10.04. Is it possible? If yes, can you please provide me some help? So, in short words, the whole thing is: Host: Ubuntu 10.10 Guest 1: Ubuntu 9.04 Guest 2: Ubuntu 10.04 Job: Must have to run two guests at a time. Because, two LDAP of two guests need to replicate. Now, If I try to get the first Guest ( hostname: mohib-laptop ) from second Guest ( hostname: zaman-laptop ), it is not getting! Do I need to change IP address of those both Guests? Or are there anything which will make it possible?

  Read the article

• what firefall linux distro applicance could track internet usage per device in my home?

  - by GregH

  Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

  Read the article

• what firefall linux distro applicance could track internet usage per device in my home?

  - by GregH

  Hello, Anyone know of a community edition/open source/free firewall/gateway software product that I could install onto an old PC to act as my firewall/gateway/proxy etc, BUT for which it has the power to track internet usage per device in my home. So: a) Mandatory - Track internet usage for devices on my home network on a per device basis (e.g. various PCs/Xbox etc) b) Mandatory - Report/graph would would give a breakdown of internet usage, per device (e.g. IP address), per day. c) Desirable - as in b) above but per hour d) Desirable - realtime graph (e.g. 5 minute measurement intervals or something) that shows current internet usage per device e) Mandatory - Handles all internal<=internet requests for all protocols (e.g. HTTP, HTTPS, xbox etc) f) Mandatory - No explicit settings in clients required - i.e. Transparent Monitoring concept (for both HTTP and non-HTTP traffic like xbox, skype etc) g) Mandatory - easy "appliance" like installation onto a dedicated low spec PC thanks in advance

  Read the article

• Using Find, Grep, Awk, or Sed To Rename Server After Cloning

  - by ServerChecker

  My client tells me they have cloned a VM in VMWare of an Ubuntu Linux server. Now it's my job to get into all the files and find out what still has the old server name of "bishop" and change it to something else. Also, the IP address is changed and I need to search for that too. How would you typically use find, grep, awk, or sed to find these files and then change them rapidly? In the end, I want to make a Bash script. Of course, I'm not expecting you to tell me every file, but just want to know the technique for finding files with "x" in it and then switching that rapidly with "y".

  Read the article

• Can't resolve localhost on Mac OS X Server

  - by iainbeeston

  I have a server running OS X Server 10.5 and it can't resolve localhost to 127.0.0.1. When I try ping this is what happens: ping localhost ping: cannot resolve localhost: Unknown host SSH and web browsers get similar results (uknown host). If I try using 127.0.0.1 or the ip address assigned on the LAN all of the above work. Here's the contents of my /etc/hosts file: cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost I have no local DNS service running. Does anyone have any idea why this might be happening or how I can fix it?

  Read the article

• I can't run uwsgi as normal user

  - by atomAltera

  I want to run uwsgi server as www user, but if I write: uwsgi --socket $SOCKET --chmod-socket 666 --pidfile $PIDFILE --daemonize $LOGFILE --chdir $CHDIR --pp $PYTHONPATH --module main --post-buffering 8192 --workers 1 --threads 10 --uid www --gid www A socket creation error occurs: Log: 1 *** Starting uWSGI 1.4.1 (64bit) on [Mon Dec 10 22:15:23 2012] *** 2 compiled with version: 4.4.5 on 17 November 2012 23:31:14 3 os: Linux-2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 4 nodename: autoblog 5 machine: x86_64 6 clock source: unix 7 pcre jit disabled 8 detected number of CPU cores: 2 9 current working directory: / 10 writing pidfile to /tmp/uwsgi_mysite.pid 11 detected binary path: /usr/local/bin/uwsgi 12 setgid() to 1002 13 set additional group 1004 (files) 14 setuid() to 1002 15 *** WARNING: you are running uWSGI without its master process manager *** 16 your memory page size is 4096 bytes 17 detected max file descriptor number: 1024 18 lock engine: pthread robust mutexes 19 unlink(): Operation not permitted [core/socket.c line 109] 20 bind(): Address already in use [core/socket.c line 141]

  Read the article

• Finding the A Record for a Home Server [closed]

  - by Ryan Allred

  I have a hosted website that allows me to add subdomains and point them to different locations on the server. I also know that I can change the 'A Record' to point it to a different IP address. Now, here's the question, I have a home server that I need to access though this hosted website's domain name. How would I go about setting up the 'A Record' on the server to point to my home server. I'm usually pretty good about keyword searches but on this one, I'm pretty lost as to what to search for.

  Read the article

• Baidu spider is hammering my server and bloating my error_log file

  - by Gravy

  I am getting the following errors in my /etc/httpd/logs/error_log file [Sun Oct 20 00:04:15 2013] [error] [client 180.76.5.16] File does not exist: /usr/local/apache/htdocs/homes [Sun Oct 20 00:08:31 2013] [error] [client 180.76.5.113] File does not exist: /usr/local/apache/htdocs/homes [Sun Oct 20 00:12:47 2013] [error] [client 180.76.5.88] File does not exist: /usr/local/apache/htdocs/homes [Sun Oct 20 00:17:07 2013] [error] [client 180.76.5.138] File does not exist: /usr/local/apache/htdocs/homes These kinds of errors are so often, that my error log files are over 500MB! I have done an IP trace on the client address to find that it belongs to something called baidu. Beijing Baidu Netcom Science and Technology Co in China. Is there a way that I can just get apache to deny any incoming requests from some crummy spider that is repeatedly hitting my site??? Is there a better way of dealing with the problem? I am happy to completely block out China if it means that I can actually track real errors.

  Read the article

• Crypto-Analysis of keylogger logs and config file. Possible?

  - by lost.

  Is there anyway Encryption on an unidentified file can be broken(file in question: config file and log files from ardamax keylogger). These files date back all the way to 2008. I searched everywhere, nothing on slashdot, nothing on google. Ardamax Keyviewer? Should I just write to Ardamax? I am at a loss of what to do. I feel comprimised. Anyone managed to decrpyt files with Crypto-analysis? More Information-- There are log files in the folder and a configuration file, "akv.cfg". Is it possible to decrypt the files and maybe getting the attackers email address used to receive the keylogger logs? I've Checked ardamax.com. They have an built-in log viewer. But its unavailable for download. If superuser isn't the proper place to ask, know where I might get help?

  Read the article

• Set up a GUI managed stateful filtering firewall?

  - by Azendale

  What ways are there of setting up a stateful filtering* firewall whose rules can be managed by a GUI? Can GUFW do it? FireStarter? (or should that be avoided because it is supposedly no longer updated?) *By filtering, I'm mean the traffic I am setting rules up for is not destined for this computer. It is either from or to other computers on my LAN. Say, for (a simplified, hypothetical) example: I have an ethernet connection at my dorm that I have plugged into eth0. It gets an address of 192.168.1.185 and I also have 192.168.185.0/24 routed to me, so I don't have to do any NAT. I have a hub attached to my second ethernet port (eth1) with a few Windows computers and I give addresses out of my 192.168.185.0/24 block with DHCP. How can I use my Ubuntu box to block incoming connections from eth0 that are being routed to my Windows computers and let through just a few specific ports (so fellow students can't see what files my Windows boxes are sharing via SMB)?

  Read the article

• Losing WLAN connections but maintaining internet connections on WIndows 7 Workgroup

  - by Di

  I have 4 computers all running Windows 7 networked in a Work group through Billion 7404vgp-m wireless router.All drivers and firmware for wireless adapters and router are up to date. Windows Firewall and Defender disabled.Disconnected ipv6. Running Nod 32 anti virus software. All have own static IP address 192.XXX.X.XXX. When I Reset the router all computers have Internet and LAN access for about 1 hour and then they will lose the LAN connection but maintain Internet connection. Resetting wireless adapters or restarting computers does nothing to fix this but resetting router will. What is causing this and how do I fix it. Thanks Di

  Read the article

• Fix bad blocks on Mac hard disk

  - by Andrew Vit

  I have a hard disk that I scanned with TechTool and it reports one bad block. As far as I can tell, TechTool only scans and reports a failure. It doesn't fix anything. Back in the day, Norton Disk Doctor did the job of scanning and flagging (remapping) bad blocks on the Mac. Today we have various tools for fixing up HFS+ directory errors (Disk Utility, fsck, DiskWarrior, TechTool), but I don't know of any tool that will do a surface scan and fix the bad blocks too. What software is available for this? If I know the address of the bad block, is there a low-level terminal utility for marking it?

  Read the article

• Need help connecting to NAS externally-port forwarding and DDNS newbie

  - by Joel

  Hi folks, I just picked up a synology NAS, and I'm loving it for internal use, but I want to be able to access the NAS externally-both from my iPhone (3G) and from the net. I have a Linksys WRT54G-TM router. My first question is whether I have set up the dyndns correctly. On my computer that is on my network, if I put in mydomain.dyndns.org, I am taken to a password popup and when I enter my router login and password, my router admin page opens up. On the same computer, I get the same results if I use my external IP address, and if I use my internal IP 192.168.0.1 So that is all as expected. However, when I go to my iphone and turn off wifi, and try to connect with 3g to the external IP or the dnydns domain, I just get an error "Safari could not open the page because the server stopped responding". What's up?

  Read the article

• Windows Azure Upgrade Domain

  - by kaleidoscope

  Windows Azure automatically divides your role instances into some “logical” domains called upgrade domains. During upgrade, Azure is updating these domains one by one. This is a by design behavior to avoid nasty situations. Some of the last feature additions and enhancements on the platform was the ability to notify your role instances in case of “environment” changes, like adding or removing being most common. In such case, all your roles get a notification of this change. Imagine if you had 50 or 60 role instances, getting notified all at once and start doing various actions to react to this change. It will be a complete disaster for your service. The way to address this problem is upgrade domains. During upgrade Windows Azure updates them one by one and only the associated role instances to a specific domain get notified of the changes taking place. Only a small number of your role instances will get notified, react and the rest will remain intact providing a seamless upgrade experience and no service disruption or downtime. http://www.kefalidis.me/archive/2009/11/27/windows-azure-ndash-what-is-an-upgrade-domain.aspx   Lokesh, M

  Read the article

• Route packets from one VPN to another

  - by Mike

  I have two OpenVPN servers (10.8.0.0 and 10.9.0.0) set up on my OpenSUSE server. Within one network, each computer is visible to any other one, but I'd like to make it so that computers are visible across networks. I'd like to route the packets like this: when a user (say 10.8.0.6) pings an address on the other VPN (10.9.0.6), the packets are routed to the 10.9.0.1 and then to the appropriate computer in this VPN. How do I achieve this using iptables or a different tool? I tried the commands at the end of this section with no avail.

  Read the article

• Internet suddenly stopped working

  - by user95629

  I was using NoMachine to access Ubuntu 11.10 when suddenly the internet on Ubuntu stopped working. Now Ubuntu doesn't recognize the internet at all (including locally). Symptoms: Doesn't recognize the fact that there is an ethernet cable attached. (I've tried switching cables, didn't work.) GUI says "No network devices available" Can't ping external IP addresses. Tried changing /etc/network/interfaces to eth1 instead of eth0 but it didn't work. ifconfig provides no output relating to eth0. When I type "/etc/init.d/networking restart" it tells me "Cannot find device 'eth0'/Failed to bring up eth0." The network settings had used a static IP address prior to the crash. I don't know why it won't recognize the ethernet (I think this is the fundamental problem, but I might be wrong) and why it stopped working so suddenly--I haven't installed any updates lately. Any ideas? Any more information I should provide? EDIT: lspci recognizes the Ethernet controller; netstat does not. lspci calls it "Intel Corporation Device 0000"

  Read the article

• Can't connect to a machine via Cisco VPN on Mac

  - by Alex

  Hi there, I have a curious problem. I can connect to work's vpn using Cisco VPN Client. I can get internet through that vpn. When I go check the IP online it tells me the IP address of the server I connected. However, when I try to ping one of the machines at work I get nothing. And traceroute says there is no route to the destination. But works for google. Any ideas? Is some traffic not sent through the VPN on mac Alex

  Read the article

• Accessing localhost on my iPhone

  - by mohabitar

  I've found similarly titled questions, but none that directly address my issue. I'm running Google App Engine server on my Macbook, and it was configured to use port 8080 on localhost. And so anytime I wanted to run my site, I'd just go to localhost:8080/saveuser and everything worked fine. Now, I want to access this same site on my iPhone. I can't just do localhost on my iPhone, so I set up Web Sharing on my mac, and it's set up to http://192.168.1.106/~mohabitar. I can access this from my iPhone, but it only displays a directory of my files, and doesn't actually run the Python script. The only way my Python scripts actually run is if I do localhost:8080 on my computer. What can I do about this?

  Read the article

• Can /etc/hosts.deny/allow be overridden?

  - by Tar

  I have security measures put in place to keep unwanted users out of my server. I've changed the SSH port, disabled root login, have a software firewall to block portscans, and have entries in hosts.deny and hosts.allow. I have various services denied to all but another server of mine should my IP change, and two other administrators + my own IP address. My question is, can hosts.deny/allow configuration be overridden so that they can gain access to my server? Does using chroot jail for running things like an IRC server and Teamspeak server prevent people from gaining access to my server and screwing with it?

  Read the article

• XML Schema For MBSA Reports

  - by Steve Hawkins

  I'm in the process of creating a script to run the command line version of Microsoft Baseline Security Analyzer (mbsacli.exe) against all of our servers. Since the MBSA reports are provided as XML documents, I should be able to write a script or small program to parse the XML looking for errors / issues. I'm wondering if anyone knows whether or not the XML schema for the MBSA reports is documented anywhere -- I have goggled this, and cant seem to find any trace of it. I've run across a few articles that address bits and pieces, but nothing that addresses the complete schema. Yes, I could just reverse engineer the XML, but I would like to understand a little more about the meaning of some of the tags. Thanks...

  Read the article

• Use Dynamic DNS to access Java servlet, still need port forward ?

  - by Frank

  If I use Dynamic DNS such as the free service at https://www.dyndns.com, do I still need to set up static IP and do port forward ? I have a DSL, most likely with dynamic IP address, and I run a Java servlet to get Paypal IPN messages on my notebook, in order for the messages to reach my notebook, I : [1] set up static IP and [2] did port forwarding. But I found each time the PC re-starts, it has a different external IP, so I was suggested to [3] get Dynamic DNS service like the free one mentioned above, but now I'm a bit confused, if I have step [3], do I still need to do [1] and [2], isn't step [3] supposed to do [1] and [2] for me ? But since I've already done [1],[2], now I wonder if they would cause trouble for step [3], do I need to undo them ? Or do I need all of them together ?

  Read the article

< Previous Page | 335 336 337 338 339 340 341 342 343 344 345 346  | Next Page >