Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 341/761 | < Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >

• Routers with USB plug to connect external storage

  - by sixtyfootersdude

  I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

  Read the article

• Remote Access Without Explicit Permission: Convenience or Liability?

  - by routeNpingme

  For outsourced professional IT remote support, one habit most new technicians get into is the "instead of getting the user to start up remote support each time, I'll go ahead and install LogMeIn / GoToMyPC / Remote Desktop / whatever so that if they call again, I can just jump on and help them". This of course opens up a potential liability because a client PC on a network that we don't own is being accessed without a user explicitly providing permission by clicking a "Yes, allow technician to control my PC" option. I realize the rules totally change when you're an IT admin over a network that you "own", but this is outsourced IT support. Just curious what others' policies are. Is this an acceptable practice for convenience and I'm turning into one of those "security is more important than anything" people, or is this really a liability?

  Read the article

• How to troubleshoot problems sharing internet connection via WiFi on Mac OS X

  - by sprugman

  I'm at a hotel, plugged into their network via ethernet on my MacBook. I want to share the connection via wifi to two other computers. I went to Prefs Sharing and set up internet sharing. I know it's working because my friend with a Mac access the net fine. My friend with the PC can see the network, but can't connect to it. In the sharing prefs, airport options, I chose these options: Channel: Automatic Enable encryption: yes WEP Key length 40-bit password length: 5 chars (as specified in the instructional text) Update: I tried it with encryption turned off, and it works. Of course, I'd rather not do that... Any ideas?

  Read the article

• Netgear VPN can't access specific server

  - by Critologist

  I have a Netgear FVS318N configured with a VPN. I'm trying to access my call recorder with the provided software from another office. I've already setup the VPN connection, and it works. I can connect and ping the remote router and a few other things on the network. However, I can't ping or connect to my call recorder. If I move outside of the office network (i.e. connect directly to the cable modem or via a mobile hotspot), I can connect and ping the call recorder just fine. The office has a simple Linksys WRT54G router and is using AT&T Uverse. The remote location is using Charter Cable with a Netgear FVS318N. Has anyone ever encountered anything like this before? I've setup an identical VPN previously for a different client using similar hardware and never encountered this. Thanks in advance!

  Read the article

• Load Testing Linux Virtual Server

  - by Anubhav Agarwal

  I have configured a Linux virtual network with following configuration 172.17.6.112- VIP 172.17.6.111- Linux Director | |----------172.17.6.113 --- Real Server 1 |----------172.17.6.114 --- Real Server 2 I am using direct routing technique. I am unable to test my LVS network. Are there some good scripts/softwares available for load testing. I am running apache2.0 service on them. I came across with testlvs on the internet but am unable to understand its documentation. Are there more simpler ones I want to test the response time of server using various scheduling algorithms .

  Read the article

• Empty Recycle Bin error "Cannot Delete Dc12: Access denied."

  - by Chris Noe

  The Dc number can vary. The error is a sporadic, but when it happens it prevents the contents of the recycle bin from being deleted. It can also occur when the recycle bin appears to be empty, yet it has the crumpled paper indicator. Rebooting makes the problem go away, but it can also magically go away by just waiting a long time, like over night. But the problem keeps recurring with no rhyme or reason. What is causing this? I really don't want to reinstall Windows.

  Read the article

• Aventail VPN connection doesn't work

  - by Warlax

  I installed the Aventail VPN client on both the Mac and a Windows 7 machine, both on my home network. When I try to connect one or the other (I make sure one is disconnected before connecting through the other machine), I get a connection and view the correct certificate - accept it and Aventail tells me that I am connected. However, accessing any page inside my company's network is only possible on Windows. On the Mac I get this page: It looks like my ISP doesn't know how to redirect me? Maybe something about my DNS being set incorrectly on the Mac? Our helpdesk has been completely useless.

  Read the article

• Audio comes out of both headphone and speaker at the same time.. Ubuntu 12.04LTS [closed]

  - by pst007x

  I have the same issue on an Aspire. Ubuntu 12.04LTS 64bit realtek audio sound chip onboard If I plug in a headset, audio does not switch from internal speaker to headset, instead plays out of both at the same time. I have looked at the alsamixer setting, all on. I installed gnome-alsamixer, and I noticed headphone was ticked, if I untick the main audio mutes, and the headphone no longer works. Headset only works with internal speaker. Audio works fine on my other desktop and laptop running this release 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) salvatore@salvatore-Aspire-7730:~$ cat /proc/asound/version Advanced Linux Sound Architecture Driver Version 1.0.24. salvatore@salvatore-Aspire-7730:~$ head -n 1 /proc/asound/card*/codec#* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC888 ==> /proc/asound/card0/codec#1 <== Codec: LSI ID 1040 ==> /proc/asound/card0/codec#2 <== Codec: Intel Cantiga HDMI salvatore@salvatore-Aspire-7730:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 salvatore@salvatore-Aspire-7730:~$ uname -a Linux salvatore-Aspire-7730 3.2.0-23-generic #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux salvatore@salvatore-Aspire-7730:~$ The alsa-base.conf does not exist Tried this: sudo apt-get remove --purge alsa-base sudo apt-get remove --purge pulseaudio sudo apt-get install alsa-base sudo apt-get install pulseaudio sudo alsa force-reload Then: sudo apt-get purge pulseaudio gstreamer0.10-pulseaudio sudo apt-get install pulseaudio gstreamer0.10-pulseaudio indicator-sound Tred this. sudo gedit Then open terminal: sudo /etc/modprobe.d/alsa-base.conf At the end of the file add a new line: options snd-hda-intel model=generic Save and then reboot But alsa-base.conf does not exist

  Read the article

• Own hosting, own domain on Virtualbox Ubuntu server - dynamic IP

  - by Pawel

  Hi, I have bought my TLD domain, say domain.com. What I'd like to do is to host the website available under this address on my own computer. I'm assigned a dynamic IP, and I'm also behind a router in my local network. I'd run sites on my ubuntu server on a virtualbox machine which is available in my local network. Preferably, I'd like to have my own domain on some server, with which I could experiment as much as I need (so it's only for educational purposes), but I can't afford to buy such a service. Is it feasible? Can you provide steps I'd need to take to configure it (could be just general explanation). I'd need some guidance, please.

  Read the article

• Linksys Wireless-N ADSL2 WAG160N losing connection

  - by Sam1973

  It seems that recently I have to turn off and then turn on my router every time I want to connect my laptop(s) to the internet. This is what's happens: When I want to connect to the internet on my laptop, the network icon in the system tray states that I am connected to the wireless network but there's no "internet connectivity" I turn off the router and turn it back on and then I can connect to the internet. I am sure there is something that needs to be done. Can you guys point me to the right direction?

  Read the article

• WiFi slow sometimes, reboot helps, how do I debug it?

  - by January

  Ubuntu 12.04.1 with all updates installed. Laptop Lenovo Thinkpad X230 with Intel Corporation Centrino Advanced-N 6205. WiFi sometimes becomes extremely slow. Often this occurs when I wake the system from suspend and connect to a different network. I find no obvious clues in system logs. /etc/init.d/network-manager restart doesn't help, but a reboot does. How can I go on with debugging this issue? In specific, which parts of the system should I try to restart (without a complete reboot)? I know of problems with Intel WiFi (see for example this question and the instructions here), but if that was the problem, I would expect the WiFi to be slow at all times, and not just sometimes. Also, I have a gut feeling that it might be a DNS issue (for example, getting a page from a known server is faster than accessing a new server), but I don't know how to tackle it. Update: despite numerous updates in the meanwhile, I still observe this behavior. It happens always when I access my WiFi router at home after returning from work; when I reboot my laptop, the connection speed is good again.

  Read the article

• Bridging two connections in windows 7

  - by Serban Razvan

  I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

  Read the article

• Can't find a wireless access point's IP address after changing router IP/LAN settings

  - by flagg19

  I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

  Read the article

• servers connected to a poweredge 6248 receive traffic for their 'neighbours'

  - by Hannes

  In the network we have a few vlans but at the moment I was investigating vlan2 which carries the most traffic. When tcpdumping on the eth0.2 interface, I see a lot of packets arriving which are not addressed to, nor coming from the server. I checked this on several servers in the network and they all have the same issues. In short, our switches don't switch the traffic but threat it like they are a hub. Can you tell me what settings on the dell poweredge 6248 should prevent this behaviour?

  Read the article

• How to synchronize users, passwords, hosts, etc without NIS

  - by joshxdr

  I am administering a very small solaris 2.6 network with 4 boxes total. Is it possible to use scp or similar to replace NIS for synchronizing users, groups, hosts, etc? This network is only a small part of my job and I don't want to spend too much time on it, and I am worried the setup and maintenence of NIS will not pay off. I need it to behave like a proper multi-user system, when a user logs into any machine, the users, passwords, hosts, etc. are always the same. Is there an easy way to do this with scp? Right now I copy /etc/passwd from one box to another with scp, but sometimes I make mistakes or forget a step, and scp inside of shell scripts don't seem to works so well since they require password authentication. Any recommendations would be welcome.

  Read the article

• How can I use my laptop's monitor as my PC's ONLY monitor? (please vote to reopen) [closed]

  - by Randell

  Please vote to reopen. This is different from Can I use my laptop as a second monitor for my desk computer?, because that question is asking how to use the laptop screen as the secondary display, not as the only display. My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux. Edit: Both machines are connected to the same wireless network. PC needs to log in before it can connect to the network if I'm not mistaken.

  Read the article

• Windows 7 - Home Drive Map Fails

  - by Ed Fries

  Server 2003 SP2 (not R2) with 2 new Win 7 Pro workstations. Home Drive is set in AD (not GP) to map to \\server\users\username. Home Drive map fails, other network drives map correctly. No error logged on server or PC, Win 7 shows "Could not reconnect all network drives." There is no Y: (Home Drive) listed, either in the GUI or via Net Use. Manual map via batch file in startup group with the same path works correctly? Home Drive map works correctly on XP workstations.

  Read the article

• How long does badblocks take on a 1TB drive?

  - by Steven Don

  I'm running badblocks (or rather "e2fsck -c") on a 1TB drive and if the progress indicator is any indication (no pun intended), it's going to take almost forever to complete. Right now it says 0.01% done, 30:20 elapsed which would mean the thing would take 17 weeks or so to complete, which seems rather excessive in my book. Is that a normal amount of time for such a check to take or it simply that my suspicions are correct in that the drive is failing, thus causing the check to take only slightly shorter than eternity? I found this question here, but that pertains to the amount of passes done.

  Read the article

• unreachable subnet in one direction

  - by Carl Michaud

  I'm unable to route traffic to a subnet in my home. Here's my topology: INET <- Router A <- Router B <- WIFI AP where: Router A - ARRIS TG862G/CT (from comcast) - WAN DHCP, LAN 10.0.0.99 Router B - Linksys WRT400N with DD-WRT - WAN 10.0.0.12 , LAN 10.0.1.1 I was able to use DD-WRT to configure a static route for the 10.0.1.x network back to the 10.0.0.x network. But I'm not sure if i can do the reverse on the ARRIS router and was looking for suggestions on how to fix that. I've set things up this wasy because I am using OpenDNS to mange internet content for my kids and of course I wasn't able to configure DNS to my liking on Router A either. So at present I'm using Router A on 10.0.0.x to provide a private unfiltered WIFI AP (no ssid broadcast) that I use for netflix only and then I use router B to provide a filtered WIFI AP for the rest of my WIFI devices on 10.0.1.x. However I would like to be able to connect to my 10.0.1.x devices from the internet via dynamic dns; but I can't see anything behind router B this way. Thoughts?

  Read the article

• Why my webservice not live on internet? [closed]

  - by blankon91

  I've windows server that goes live on internet, (e.g. www.mysite.com). Then I want to create another site with different port (e.g. www.mysite.com:502). I've create that and it works when I access it on local network, but when I access it from outside of local network (internet) the www.mysite.com:502 can't accessed but the www.mysite.com can accessed. what should I do to make www.mysite.com:502 goes online? I use windows server 2008 standard

  Read the article

• Is there a reason the partition tool GParted doesn't show a percentage finish number initially?

  - by Jian Lin

  I am using GParted more, and it seems to do a reliable work. I just wonder why if the tasks is to resize a 250GB partition to 190GB, and then create a new partition, the first 10, 15 minutes, there is only a blue bar moving left and right, but there won't be an indicator showing how many percent is done. Then after that 10 to 15 minutes, it does show 1:05:00 left to finish the job. Update: at first I thought there is no percentage or time remaining at all... but after waiting for 10, 15 mintues, it does show. I just wonder why it didn't show at first.

  Read the article

• Can I find the session ID for a user logged on to another machine?

  - by Dan

  I want to open an application on another computer on the same network via the command line. The scenario here is that the user is in a room surrounded by about 20 computers and wants to be able to launch the same app on every computer without walking from screen to screen opening it up on each individual machine. I've discovered that I can get the basic functionality for this using PsExec as follows: psexec \\[computer] -u [username] -p [password] -d -i [SessionID] [program] For computer, username, password, and program, I'm good. Does anyone know of a way I can figure out which SessionID is assigned to a particular user logged on to a particular machine on the network? Alternately, is there a better way to go about what I'm trying to accomplish?

  Read the article

• Domain users sometimes cannot access our NAS

  - by Natalie

  I'm using a QNAP TS-410 Turbo NAS and I've got domain users connecting to it frequently everyday. However, there are times when their connection to the NAS will seem to just drop and, suddenly, they cannot access their network drives (which I had set up our Domain Controller to automatically map to folders on the NAS). Could you please tell me what may cause this? I don't think it is a network issue as everything else seems to work just fine. (If more details are needed, please let me know so I can update this question.)

  Read the article

• X200 Tablet notebook won't start after BIOS Update

  - by THEn

  I have LENOVO X200 Tablet and I ran the BIOS Update and the computer won't start after the BIOS update. When I ran the BIOS update utility it ran everything fine and asked to restart the computer but it wont start screen is blank. I unplugged the power and took of the battery and put them back and still not starting. Now it has [Power On] indicator light on and screen is not starting. I tried pressing F1 button while trying to start the computer but it doesn't do react to anything. Please help how I can start my Tablet. The update utility is http://support.lenovo.com/en_US/downloads/detail.page?LegacyDocID=MIGR-70651 Does any body know if X200 have any kind of hardware switch to reset the BIOS or any thing? What would be the best way to fix my BIOS? Thank you.

  Read the article

• Can connect to WAN via PC but router doesnt.

  - by user16877

  I have a very strange problem regarding the office network. We are currenltly in a executive suite and when i connect to wan via ethernet cable i get dhcp assigned IP address in my network config. I hooked up the linksys router to the wall expecting it to receive all the necessary ip info but that didnt work. So we have been assigned static ip address to put in to our router later but even with the static ip router doesnt seem to connect to internet. But using the same ip address and assigning to laptop works. I m very puzzled what might be the cause of this so any help is really appreciated.

  Read the article

< Previous Page | 337 338 339 340 341 342 343 344 345 346 347 348  | Next Page >