Search Results

Search found 9279 results on 372 pages for 'job queue'.

Page 342/372 | < Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >

  • C++ FBX Animation Importer Using the FBX SDK

    - by Mike Sawayda
    Does anyone have any experience using the FBX SDK to load in animations. I got the meshes loaded in correctly with all of their verts, indices, UV's, and normals. I am just now trying to get the Animations working correctly. I have looked at the FBX SDK documentation with little help. If someone could just help me get started or point me in the right direction I would greatly appreciate it. I added some code so you can kinda get an idea of what I am doing. I should be able to place that code anywhere in the load FBX function and have it work. //GETTING ANIMAION DATA for(int i = 0; i < scene->GetSrcObjectCount<FbxAnimStack>(); ++i) { FbxAnimStack* lAnimStack = scene->GetSrcObject<FbxAnimStack>(i); FbxString stackName = "Animation Stack Name: "; stackName += lAnimStack->GetName(); string sStackName = stackName; int numLayers = lAnimStack->GetMemberCount<FbxAnimLayer>(); for(int j = 0; j < numLayers; ++j) { FbxAnimLayer* lAnimLayer = lAnimStack->GetMember<FbxAnimLayer>(j); FbxString layerName = "Animation Stack Name: "; layerName += lAnimLayer->GetName(); string sLayerName = layerName; queue<FbxNode*> nodes; FbxNode* tempNode = scene->GetRootNode(); while(tempNode != NULL) { FbxAnimCurve* lAnimCurve = tempNode->LclTranslation.GetCurve(lAnimLayer, FBXSDK_CURVENODE_COMPONENT_X); if(lAnimCurve != NULL) { //I know something needs to be done here but I dont know what. } for(int i = 0; i < tempNode->GetChildCount(false); ++i) { nodes.push(tempNode->GetChild(i)); } if(nodes.size() > 0) { tempNode = nodes.front(); nodes.pop(); } else { tempNode = NULL; } } } } Here is the full function bool FBXLoader::LoadFBX(ParentMeshObject* _parentMesh, char* _filePath, bool _hasTexture) { FbxManager* fbxManager = FbxManager::Create(); if(!fbxManager) { printf( "ERROR %s : %d failed creating FBX Manager!\n", __FILE__, __LINE__ ); } FbxIOSettings* ioSettings = FbxIOSettings::Create(fbxManager, IOSROOT); fbxManager->SetIOSettings(ioSettings); FbxString filePath = FbxGetApplicationDirectory(); fbxManager->LoadPluginsDirectory(filePath.Buffer()); FbxScene* scene = FbxScene::Create(fbxManager, ""); int fileMinor, fileRevision; int sdkMajor, sdkMinor, sdkRevision; int fileFormat; FbxManager::GetFileFormatVersion(sdkMajor, sdkMinor, sdkRevision); FbxImporter* importer = FbxImporter::Create(fbxManager, ""); if(!fbxManager->GetIOPluginRegistry()->DetectReaderFileFormat(_filePath, fileFormat)) { //Unrecognizable file format. Try to fall back on FbxImorter::eFBX_BINARY fileFormat = fbxManager->GetIOPluginRegistry()->FindReaderIDByDescription("FBX binary (*.fbx)"); } bool importStatus = importer->Initialize(_filePath, fileFormat, fbxManager->GetIOSettings()); importer->GetFileVersion(fileMinor, fileMinor, fileRevision); if(!importStatus) { printf( "ERROR %s : %d FbxImporter Initialize failed!\n", __FILE__, __LINE__ ); return false; } importStatus = importer->Import(scene); if(!importStatus) { printf( "ERROR %s : %d FbxImporter failed to import the file to the scene!\n", __FILE__, __LINE__ ); return false; } FbxAxisSystem sceneAxisSystem = scene->GetGlobalSettings().GetAxisSystem(); FbxAxisSystem axisSystem( FbxAxisSystem::eYAxis, FbxAxisSystem::eParityOdd, FbxAxisSystem::eLeftHanded ); if(sceneAxisSystem != axisSystem) { axisSystem.ConvertScene(scene); } TriangulateRecursive(scene->GetRootNode()); FbxArray<FbxMesh*> meshes; FillMeshArray(scene, meshes); unsigned short vertexCount = 0; unsigned short triangleCount = 0; unsigned short faceCount = 0; unsigned short materialCount = 0; int numberOfVertices = 0; for(int i = 0; i < meshes.GetCount(); ++i) { numberOfVertices += meshes[i]->GetPolygonVertexCount(); } Face face; vector<Face> faces; int indicesCount = 0; int ptrMove = 0; float wValue = 0.0f; if(!_hasTexture) { wValue = 1.0f; } for(int i = 0; i < meshes.GetCount(); ++i) { int vertexCount = 0; vertexCount = meshes[i]->GetControlPointsCount(); if(vertexCount == 0) continue; VertexType* vertices; vertices = new VertexType[vertexCount]; int triangleCount = meshes[i]->GetPolygonVertexCount() / 3; indicesCount = meshes[i]->GetPolygonVertexCount(); FbxVector4* fbxVerts = new FbxVector4[vertexCount]; int arrayIndex = 0; memcpy(fbxVerts, meshes[i]->GetControlPoints(), vertexCount * sizeof(FbxVector4)); for(int j = 0; j < triangleCount; ++j) { int index = 0; FbxVector4 fbxNorm(0, 0, 0, 0); FbxVector2 fbxUV(0, 0); bool texCoordFound = false; face.indices[0] = index = meshes[i]->GetPolygonVertex(j, 0); vertices[index].position.x = (float)fbxVerts[index][0]; vertices[index].position.y = (float)fbxVerts[index][1]; vertices[index].position.z = (float)fbxVerts[index][2]; vertices[index].position.w = wValue; meshes[i]->GetPolygonVertexNormal(j, 0, fbxNorm); vertices[index].normal.x = (float)fbxNorm[0]; vertices[index].normal.y = (float)fbxNorm[1]; vertices[index].normal.z = (float)fbxNorm[2]; texCoordFound = meshes[i]->GetPolygonVertexUV(j, 0, "map1", fbxUV); vertices[index].texture.x = (float)fbxUV[0]; vertices[index].texture.y = (float)fbxUV[1]; face.indices[1] = index = meshes[i]->GetPolygonVertex(j, 1); vertices[index].position.x = (float)fbxVerts[index][0]; vertices[index].position.y = (float)fbxVerts[index][1]; vertices[index].position.z = (float)fbxVerts[index][2]; vertices[index].position.w = wValue; meshes[i]->GetPolygonVertexNormal(j, 1, fbxNorm); vertices[index].normal.x = (float)fbxNorm[0]; vertices[index].normal.y = (float)fbxNorm[1]; vertices[index].normal.z = (float)fbxNorm[2]; texCoordFound = meshes[i]->GetPolygonVertexUV(j, 1, "map1", fbxUV); vertices[index].texture.x = (float)fbxUV[0]; vertices[index].texture.y = (float)fbxUV[1]; face.indices[2] = index = meshes[i]->GetPolygonVertex(j, 2); vertices[index].position.x = (float)fbxVerts[index][0]; vertices[index].position.y = (float)fbxVerts[index][1]; vertices[index].position.z = (float)fbxVerts[index][2]; vertices[index].position.w = wValue; meshes[i]->GetPolygonVertexNormal(j, 2, fbxNorm); vertices[index].normal.x = (float)fbxNorm[0]; vertices[index].normal.y = (float)fbxNorm[1]; vertices[index].normal.z = (float)fbxNorm[2]; texCoordFound = meshes[i]->GetPolygonVertexUV(j, 2, "map1", fbxUV); vertices[index].texture.x = (float)fbxUV[0]; vertices[index].texture.y = (float)fbxUV[1]; faces.push_back(face); } meshes[i]->Destroy(); meshes[i] = NULL; int indexCount = faces.size() * 3; unsigned long* indices = new unsigned long[faces.size() * 3]; int indicie = 0; for(unsigned int i = 0; i < faces.size(); ++i) { indices[indicie++] = faces[i].indices[0]; indices[indicie++] = faces[i].indices[1]; indices[indicie++] = faces[i].indices[2]; } faces.clear(); _parentMesh->AddChild(vertices, indices, vertexCount, indexCount); } return true; }

    Read the article

  • mysql not starting

    - by Eiriks
    I have a server running on rackspace.com, it been running for about a year (collecting data for a project) and no problems. Now it seems mysql froze (could not connect either through ssh command line, remote app (sequel pro) or web (pages using the db just froze). I got a bit eager to fix this quick and rebooted the virtual server, running ubuntu 10.10. It is a small virtual LAMP server (10gig storage - I'm only using 1, 256mb ram -has not been a problem). Now after the reboot, I cannot get mysql to start again. service mysql status mysql stop/waiting I believe this just means mysql is not running. How do I get this running again? service mysql start start: Job failed to start No. Just typing 'mysql' gives: mysql ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (111) There is a .sock file in this folder, 'ls -l' gives: srwxrwxrwx 1 mysql mysql 0 2012-12-01 17:20 mysqld.sock From googleing this for a while now, I see that many talk about the logfile and my.cnf. Logs Not sure witch ones I should look at. This log-file is empty: 'var/log/mysql/error.log', so is the 'var/log/mysql.err' and 'var/log/mysql.log'. my.cnf is located in '/etc/mysql' and looks like this. Can't see anything clearly wrong with it either. # # The MySQL database server configuration file. # # You can copy this to one of: # - "/etc/mysql/my.cnf" to set global options, # - "~/.my.cnf" to set user-specific options. # # One can use all long options that the program supports. # Run program with --help to get a list of available options and with # --print-defaults to see which it would actually understand and use. # # For explanations see # http://dev.mysql.com/doc/mysql/en/server-system-variables.html # This will be passed to all mysql clients # It has been reported that passwords should be enclosed with ticks/quotes # escpecially if they contain "#" chars... # Remember to edit /etc/mysql/debian.cnf when changing the socket location. [client] port = 3306 socket = /var/run/mysqld/mysqld.sock # Here is entries for some specific programs # The following values assume you have at least 32M ram # This was formally known as [safe_mysqld]. Both versions are currently parsed. [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] # # * Basic Settings # # # * IMPORTANT # If you make changes to these settings and your system uses apparmor, you may # also need to also adjust /etc/apparmor.d/usr.sbin.mysqld. # user = mysql socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp skip-external-locking # # Instead of skip-networking the default is now to listen only on # localhost which is more compatible and is not less secure. bind-address = 127.0.0.1 # # * Fine Tuning # key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 # This replaces the startup script and checks MyISAM tables if needed # the first time they are touched myisam-recover = BACKUP #max_connections = 100 #table_cache = 64 #thread_concurrency = 10 # # * Query Cache Configuration # query_cache_limit = 1M query_cache_size = 16M # # * Logging and Replication # # Both location gets rotated by the cronjob. # Be aware that this log type is a performance killer. # As of 5.1 you can enable the log at runtime! #general_log_file = /var/log/mysql/mysql.log #general_log = 1 log_error = /var/log/mysql/error.log # Here you can see queries with especially long duration #log_slow_queries = /var/log/mysql/mysql-slow.log #long_query_time = 2 #log-queries-not-using-indexes # # The following can be used as easy to replay backup logs or for replication. # note: if you are setting up a replication slave, see README.Debian about # other settings you may need to change. #server-id = 1 #log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M #binlog_do_db = include_database_name #binlog_ignore_db = include_database_name # # * InnoDB # # InnoDB is enabled by default with a 10MB datafile in /var/lib/mysql/. # Read the manual for more InnoDB related options. There are many! # # * Security Features # # Read the manual, too, if you want chroot! # chroot = /var/lib/mysql/ # # For generating SSL certificates I recommend the OpenSSL GUI "tinyca". # # ssl-ca=/etc/mysql/cacert.pem # ssl-cert=/etc/mysql/server-cert.pem # ssl-key=/etc/mysql/server-key.pem [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] #no-auto-rehash # faster start of mysql but no tab completition [isamchk] key_buffer = 16M # # * IMPORTANT: Additional settings that can override those from this file! # The files must end with '.cnf', otherwise they'll be ignored. # !includedir /etc/mysql/conf.d/ I need the data in the database (so i'd like to avoid reinstalling), and I need it back up running again. All hint, tips and solutions are welcomed and appreciated.

    Read the article

  • The ASP.NET Daily Community Spotlight - How posts get there, and how to make it your Visual Studio Start Page

    - by Jon Galloway
    One really cool part of my job is selecting the articles for the Daily Community Spotlight, on the home page of the ASP.NET website. The spotlight highlights a new post about ASP.NET development every day from a member of the ASP.NET community. You can find it on the home page of the ASP.NET site, at http://asp.net These posts aren't automatically drawn from a pool of RSS feeds or anything - I pick a new post for each day of the year. How I pick the posts I have a few important selection criteria: Interesting to well rounded ASP.NET developers The ASP.NET website has a lot of material for all skill and experience levels, from download / get started to advanced. I try to select community spotlight posts to round that out with fresh and timely information that working ASP.NET developers can really use. Posts highlight solutions to common problems, clever projects and code that helps you leverage ASP.NET, and important announcements about things you can use today. As part of that, I try to mix between ASP.NET MVC, Web Forms, and Web Pages (a.k.a. WebMatrix). As a professional developer, I want to keep on top of all of my options for ASP.NET development, and the common platform base they all share generally means that good ASP.NET code is good ASP.NET code. Exposing new and non-Microsoft community members as much as possible The exercise of selecting good ASP.NET community posts every day of the year has made me think about what the community is. Given the choice, I'll always favor non-Microsoft employees, but since Microsoft often hires ASP.NET community members and MVP's (myself included), I really think that the ASP.NET community includes developers who are using and writing about ASP.NET, both inside and outside of Microsoft. I'm especially excited about the opportunity to highlight new and lesser known bloggers. Usually being featured on the ASP.NET Community Spotlight gives a pretty good traffic bump, and I love being able to both provide great content to the community and encourage lesser known community members by giving them some (much deserved) attention. Announcements only when they're useful to working developers - not marketing Some of the posts are announcements about new releases, such as Scott Hanselman's post on ASP.NET Universal Providers for Session, Memebership, and Roles. I include those when I think they're interesting and of immediate use to you on projects. I occasionally get asked to link to new content from a team at Microsoft; if it's useful and timely content I'll ask them to point me to a blog post by an actual person rather than a faceless team. How the posts are managed This feed used to be managed by an internal spreadsheet on a Sharepoint site, which was painful for a lot of reasons. I took a cue from Jon Udell, who uses of a public Delicious feed feed for his Elm City project, and we moved the management of these posts over to a Delicious feed as well. You can hear more about Jon's use of Delicious in Elm City in our Herding Code interview - still one of my favorite interviews. We ended up with a simpler scenario, but Note: I watched the Yahoo/Delicious news over the past year and was happy to see that Delicious was recently acquired by the founders of YouTube. I investigated several other Delicious competitors, but am happy with Delicious for now. My Delicious feed here: http://www.delicious.com/jon_galloway You can also browse through this past year's ASP.NET Community Spotlight posts using the (pretty cool) Delicious Browse Bar Submitting articles I'm always on the lookout for new articles to feature. The best way to get them to me is to share them via Delicious. It's pretty easy - sign up for an account, then you can add a post and share it to me. Alternatively, you can send them to me via Twitter (@jongalloway) or e-mail (). If you do e-mail me, it helps to include a short description and your full name so I can credit you. Way too many developer blogs don't include names and pictures; if I can't find them I can't feature the post. Subscribing to the Community Spotlight feed The Community Spotlight is available as an RSS feed, so you might want to subscribe to it: http://www.asp.net/rss/spotlight Setting the ASP.NET Community Spotlight feed as your Visual Studio start page If you're an ASP.NET developer, you might consider setting the ASP.NET Community Spotlight as the content for your Visual Studio Start Page. It's really easy - here's how to do it in Visual Studio 2010: Display the Visual Studio Start Page if it's not already showing (View / Start Page) Click on the Latest News tab and enter the following RSS URL: http://www.asp.net/rss/spotlight If you didn't previously have RSS feeds enabled for your start page, click the Enable RSS Feed button Now, every time you start up Visual Studio you'll see great content from members of the ASP.NET community: You can also configure - and disable, if you'd like - the Visual Studio start page in the Tools / Options / Environment / Startup dialog. Credits I'll do a follow-up highlighting some places I commonly find great content for the feed, but I'd like to specifically point out two of them: Elijah Manor posts a lot of great content, which is available in his Twitter feed at @elijahmanor, on his Delicious feed, and on a dedicated website - Web Dev Tweets Chris Alcock's The Morning Brew is a must-read blog which highlights each day's best blog posts across the .NET community. He's an absolute machine, and no matter how obscure the post I find, I can guarantee he'll find it as well if he hasn't already. Did I say must read?

    Read the article

  • Cannot Install/Start MySQL Server

    - by Peezy Bro
    Okay, I decided to migrate from MySQL Server 5.5.37 to Percona Server 5.6. I ended up removing MySQL Server by the following: sudo apt-get --purge remove mysql-server mysql-server-5.5 mysql-server-core-5.5 mysql-client mysql-client-core-5.5 mysql-common sudo apt-get autoremove sudo apt-get autoclean rm -rf /var/lib/mysql rm -rf /etc/mysql Now here is my problem, when I try to install MySQL Server 5.6 it goes through its process and when it asks me for a password, it comes up with Cannot set MySQL "root" password. After it "installs" MySQL wont start up and I get permission denied?. Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 35 not upgraded. brandon@brandon-DB:~$ sudo apt-get install mysql-server Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: libdbd-mysql-perl libdbi-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server-5.5 mysql-server-core-5.5 Suggested packages: libmldbm-perl libnet-daemon-perl libplrpc-perl libsql-statement-perl tinyca mailx The following NEW packages will be installed: libdbd-mysql-perl libdbi-perl libmysqlclient18 libterm-readkey-perl mysql-client-5.5 mysql-client-core-5.5 mysql-common mysql-server mysql-server-5.5 mysql-server-core-5.5 0 upgraded, 10 newly installed, 0 to remove and 35 not upgraded. Need to get 0 B/8,955 kB of archives. After this operation, 96.3 MB of additional disk space will be used. Do you want to continue? [Y/n] y Preconfiguring packages ... Selecting previously unselected package mysql-common. (Reading database ... 167760 files and directories currently installed.) Preparing to unpack .../mysql-common_5.5.37-0ubuntu0.14.04.1_all.deb ... Unpacking mysql-common (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package libmysqlclient18:amd64. Preparing to unpack .../libmysqlclient18_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking libmysqlclient18:amd64 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package libdbi-perl. Preparing to unpack .../libdbi-perl_1.630-1_amd64.deb ... Unpacking libdbi-perl (1.630-1) ... Selecting previously unselected package libdbd-mysql-perl. Preparing to unpack .../libdbd-mysql-perl_4.025-1_amd64.deb ... Unpacking libdbd-mysql-perl (4.025-1) ... Selecting previously unselected package libterm-readkey-perl. Preparing to unpack .../libterm-readkey-perl_2.31-1_amd64.deb ... Unpacking libterm-readkey-perl (2.31-1) ... Selecting previously unselected package mysql-client-core-5.5. Preparing to unpack .../mysql-client-core-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-client-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-client-5.5. Preparing to unpack .../mysql-client-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-client-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server-core-5.5. Preparing to unpack .../mysql-server-core-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-server-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Processing triggers for man-db (2.6.7.1-1) ... Setting up mysql-common (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server-5.5. (Reading database ... 168116 files and directories currently installed.) Preparing to unpack .../mysql-server-5.5_5.5.37-0ubuntu0.14.04.1_amd64.deb ... Unpacking mysql-server-5.5 (5.5.37-0ubuntu0.14.04.1) ... Selecting previously unselected package mysql-server. Preparing to unpack .../mysql-server_5.5.37-0ubuntu0.14.04.1_all.deb ... Unpacking mysql-server (5.5.37-0ubuntu0.14.04.1) ... Processing triggers for ureadahead (0.100.0-16) ... Processing triggers for man-db (2.6.7.1-1) ... Setting up libmysqlclient18:amd64 (5.5.37-0ubuntu0.14.04.1) ... Setting up libdbi-perl (1.630-1) ... Setting up libdbd-mysql-perl (4.025-1) ... Setting up libterm-readkey-perl (2.31-1) ... Setting up mysql-client-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-client-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-server-core-5.5 (5.5.37-0ubuntu0.14.04.1) ... Setting up mysql-server-5.5 (5.5.37-0ubuntu0.14.04.1) ... start: Job failed to start invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing package mysql-server-5.5 (--configure): subprocess installed post-installation script returned error exit status 1 dpkg: dependency problems prevent configuration of mysql-server: mysql-server depends on mysql-server-5.5; however: Package mysql-server-5.5 is not configured yet. dpkg: error processing package mysql-server (--configure): dependency problems - leaving unconfigured Processing triggers for libc-bin (2.19-0ubuntu6) ... No apport report written because the error message indicates its a followup error from a previous failure. Processing triggers for ureadahead (0.100.0-16) ... Errors were encountered while processing: mysql-server-5.5 mysql-server E: Sub-process /usr/bin/dpkg returned an error code (1) I have all my database/tables dumped and on a seperate HDD. This is also a Dev Machine and not my main Production Machine. I also backed up the MySQL_Config and MySQL_Data.

    Read the article

  • Mobile HCM: It’s not the future, it is right now

    - by Natalia Rachelson
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Steve Boese, Director Product Strategy, Oracle I’ll bet you reached for your iPhone or Android or BlackBerry and took a quick look at email or Facebook or last night’s text messages before you even got out of bed this morning. Come on, admit it, it’s ok, you are among friends here. See, feel better now? But seriously, the incredible growth and near-ubiquity of increasingly powerful, capable, and for many of us, essential in our daily lives mobile devices has profoundly changed the way we communicate, consume information, socialize, and more and more, conduct business and get our work done. And if you doubt that profound change has happened, just think for a moment about the last time you misplaced your iPhone.  The shivers, the cold sweats, the panic... We have all been there. And indeed your personal experiences with mobile technology echoes throughout the world - here are a few data points to consider: Market research firm IDC estimates 1.8 billion mobile phones will be shipped in 2012. A recent Pew study reports 46% of Americans own a smartphone of some kind. And finally in the USA, ownership of tablets like the iPad has doubled from 10% to 19% in the last year. So truly for the Human Resources leader, the question is no longer, ‘Should HR explore ways to exploit mobile devices and their always-on nature to better support and empower the modern workforce?’, but rather ‘How can HR best take advantage of smartphone and tablet capability to provide information, enable transactions, and enhance decision making?’. Because even though moving HCM applications to mobile devices seems inherently logical given today’s fast-moving and mobile workforces, and its promise to deliver incredible value to the organization, HR leaders also have to consider many factors before devising their Mobile HCM strategy and embarking on mobile HR technology projects. Here are just some of the important considerations for HR leaders as you build your strategies and evaluate mobile HCM solutions: Does your organization provide mobile devices to the workforce today, and if so, will the current set of deployed devices have the necessary capability and ecosystems to support your mobile HCM initiatives? Will you allow workers to use or bring their own mobile devices, (commonly abbreviated as ‘BYOD’), and if so are your IT and Security organizations in agreement and capable of supporting that strategy? Do you know which workers need access to mobile HCM applications? Often mobile HCM capability flows down in an organization, with executives and other ‘road-warrior’ types having the most immediate needs, followed by field sales staff, project managers, and even potential job candidates. But just as an organization will have to spend time understanding ‘who’ should have access to mobile HCM technology, the ‘what’ of the way the solutions should be deployed to these groups will also vary. What works and makes sense for the executive, (company-wide dashboards and analytics on an iPad), might not be as relevant for a retail store manager, (employee schedules, location-level sales and inventory data, transaction approvals, etc.). With Oracle Fusion HCM, we are taking an approach to mobile HR that encompasses not just the mobile solution needs for the various types of worker, but also incorporates the fundamental attributes of great mobile applications - the ability to support end-to-end transactions, apps that respond with lightning-fast speed, with functions that are embedded in a worker’s daily activities, and features that can be mashed-up easily with other business areas like Finance and CRM. Finally, and perhaps most importantly for the Oracle Fusion HCM team, delivering mobile experiences that truly enhance, enable, and empower the mobile workforce, and deliver on the design mantras of the best-in-class consumer applications, continues to shape and drive design decisions. Mobile is no longer the future, it is right now, and the cutting-edge HR leader of today will need to consider how mobile fits her HCM technology strategy from here on out. You can learn more about our ideas and plans for Oracle Fusion HCM mobile solutions at https://fusiontap.oracle.com/.

    Read the article

  • Using C# 4.0’s DynamicObject as a Stored Procedure Wrapper

    - by EltonStoneman
    [Source: http://geekswithblogs.net/EltonStoneman] Overview Ignoring the fashion, I still make a lot of use of DALs – typically when inheriting a codebase with an established database schema which is full of tried and trusted stored procedures. In the DAL a collection of base classes have all the scaffolding, so the usual pattern is to create a wrapper class for each stored procedure, giving typesafe access to parameter values and output. DAL calls then looks like instantiate wrapper-populate parameters-execute call:       using (var sp = new uspGetManagerEmployees())     {         sp.ManagerID = 16;         using (var reader = sp.Execute())         {             //map entities from the output         }     }   Or rolling it all into a fluent DAL call – which is nicer to read and implicitly disposes the resources:   This is fine, the wrapper classes are very simple to handwrite or generate. But as the codebase grows, you end up with a proliferation of very small wrapper classes: The wrappers don't add much other than encapsulating the stored procedure call and giving you typesafety for the parameters. With the dynamic extension in .NET 4.0 you have the option to build a single wrapper class, and get rid of the one-to-one stored procedure to wrapper class mapping. In the dynamic version, the call looks like this:       dynamic getUser = new DynamicSqlStoredProcedure("uspGetManagerEmployees", Database.AdventureWorks);     getUser.ManagerID = 16;       var employees = Fluently.Load<List<Employee>>()                             .With<EmployeeMap>()                             .From(getUser);   The important difference is that the ManagerId property doesn't exist in the DynamicSqlStoredProcedure class. Declaring the getUser object with the dynamic keyword allows you to dynamically add properties, and the DynamicSqlStoredProcedure class intercepts when properties are added and builds them as stored procedure parameters. When getUser.ManagerId = 16 is executed, the base class adds a parameter call (using the convention that parameter name is the property name prefixed by "@"), specifying the correct SQL Server data type (mapping it from the type of the value the property is set to), and setting the parameter value. Code Sample This is worked through in a sample project on github – Dynamic Stored Procedure Sample – which also includes a static version of the wrapper for comparison. (I'll upload this to the MSDN Code Gallery once my account has been resurrected). Points worth noting are: DynamicSP.Data – database-independent DAL that has all the data plumbing code. DynamicSP.Data.SqlServer – SQL Server DAL, thin layer on top of the generic DAL which adds SQL Server specific classes. Includes the DynamicSqlStoredProcedure base class. DynamicSqlStoredProcedure.TrySetMember. Invoked when a dynamic member is added. Assumes the property is a parameter named after the SP parameter name and infers the SqlDbType from the framework type. Adds a parameter to the internal stored procedure wrapper and sets its value. uspGetManagerEmployees – the static version of the wrapper. uspGetManagerEmployeesTest – test fixture which shows usage of the static and dynamic stored procedure wrappers. The sample uses stored procedures from the AdventureWorks database in the SQL Server 2008 Sample Databases. Discussion For this scenario, the dynamic option is very favourable. Assuming your DAL is itself wrapped by a higher layer, the stored procedure wrapper classes have very little reuse. Even if you're codegening the classes and test fixtures, it's still additional effort for very little value. The main consideration with dynamic classes is that the compiler ignores all the members you use, and evaluation only happens at runtime. In this case where scope is strictly limited that's not an issue – but you're relying on automated tests rather than the compiler to find errors, but that should just encourage better test coverage. Also you can codegen the dynamic calls at a higher level. Performance may be a consideration, as there is a first-time-use overhead when the dynamic members of an object are bound. For a single run, the dynamic wrapper took 0.2 seconds longer than the static wrapper. The framework does a good job of caching the effort though, so for 1,000 calls the dynamc version still only takes 0.2 seconds longer than the static: You don't get IntelliSense on dynamic objects, even for the declared members of the base class, and if you've been using class names as keys for configuration settings, you'll lose that option if you move to dynamics. The approach may make code more difficult to read, as you can't navigate through dynamic members, but you do still get full debugging support.     var employees = Fluently.Load<List<Employee>>()                             .With<EmployeeMap>()                             .From<uspGetManagerEmployees>                             (                                 i => i.ManagerID = 16,                                 x => x.Execute()                             );

    Read the article

  • top tweets WebLogic Partner Community – November 2011

    - by JuergenKress
    Send us your tweets @wlscommunity #WebLogicCommunity and follow us on twitter http://twitter.com/wlscommunity glassfish GlassFish Marek’s JAX-RS 2.0 content from Devoxx 2011 – bit.ly/sp2NJO chriscmuir chriscmuir New blog post: ADF bug: missing af:column borders in af:table for IE7 – t.co/81np2jug chriscmuir chriscmuir Reading: Oracle’s ADF Rich Client User Interface (RCUI) Guidelines – oracle.com/webfolder/ux/m… netbeans NetBeans Team Bottlenecks be gone! #Java Performance Tuning workshop in Munich w Kirk Pepperdine, Nov 29-Dec 2: ow.ly/7Akh5 OracleBlogs OracleBlogs Creating ADF Faces Comamnd Button at Runtime ow.ly/1fM9dE alexismp Alexis MP blogged "GlassFish Back from Devoxx 2011, Mature Java EE 6 and EE 7 well on its way" – bit.ly/rP8LV0 JDeveloper JDeveloper & ADF Usage of jQuery in ADF dlvr.it/x3t84 20 hours ago Favorite Retweet Reply OTNArchBeat OTNArchBeat Webcast: Introducing Oracle WebLogic Server 12c: Developer Deep Dive – Dec 1 – 11am PT / 2pm ET bit.ly/t61W4G oraclepartners ORCL PartnerNetwork Brand new Oracle WebLogic 12c will launch on December 1, 10AM PT with a global Webcast highlighting salient… t.co/aflQQ3IX OracleBlogs OracleBlogs JDeveloper and ADF at UKOUG t.co/2CQTiB9n fnimphiu Frank Nimphius Attending UKOUG? All ADF sessions at a glance: t.co/TcMNTMXp 21 Nov Favorite Retweet Reply JDeveloper JDeveloper & ADF Free Webinar ‘ADF Task Flows for Beginners’, information and registration t.co/66jXnGgo via javafx4you javafx4you Java Developer Workshop #2 – Dec 1, 2011 @ Oracle Aoyama center in Tokyo t.co/8p9q3W2B AMIS_Services AMIS Services #vacature #Oracle #ADF ontwikkelaars. bit.ly/AMISADF Gun jezelf een nieuwe uitdaging? Meer op: dld.bz/azZ5N OracleBlogs OracleBlogs Launch Invitation: Introducing Oracle WebLogic Server 12c t.co/bRxCKwAk fnimphiu Frank Nimphius The brand new WebLogic 12c will be released on December 1st 2011 !!! Register for online launch event t.co/pPScg4Xh glassfish GlassFish Announcing Oracle WebLogic 12c – t.co/qh8TdFEl AdamBien Adam Bien Sun Coding Conventions–The Only Standard (Stop Inventing): Code written according to the Sun Coding Conventions… t.co/qaUWp5Mz wlscommunity WebLogic Community Launch Invitation: Introducing Oracle WebLogic Server 12c wp.me/p1LMIb-4y andrejusb Andrejus Baranovskis Andrejus Baranovskis’s Blog: Custom Exception Registration for ADF BC EO Attribute fb.me/1m6nXQD52 MNEMONIC01 Michel Schildmeijer Blog by Michel Schildmeijer: "Oracle WebLogic 12c has been announced" bit.ly/vk6WQL glassfish GlassFish Tab Sweep – Coherence, SBT for GlassFish, OSGi in question, Java EE plugins, … t.co/tVIL95lj OracleBlogs OracleBlogs JavaFX 2.0 at Devoxx 2011 ow.ly/1fJ5iT JDeveloper JDeveloper & ADF Experimenting with ADF BC Application Module Pool Tuning dlvr.it/wjLC1 OracleWebLogic Oracle WebLogic Brand New #WebLogic 12c Launch Event, Dec 1 10am PT. Hasan Rizvi, SVP Fusion Middleware. Developer session. bit.ly/weblogic12clau… JDeveloper JDeveloper & ADF PopUp and Esc/Cancel operations. ADF 11g dlvr.it/whrmC JDeveloper JDeveloper & ADF BPM Workspace: issue loading ADF task flows t.co/vk1gKPx5 OpenJDK OpenJDK Kelly O’Hair — OpenJDK B24 Available : t.co/1bFws6Nw JDeveloper JDeveloper & ADF Oracle ADF setting Task flow to use same page definition file of caller page t.co/9k6UIoYZ JDeveloper JDeveloper & ADF Master Detail Data presentation and CRUD Operations. Detail records in an Editable Popup. ADF 11g t.co/H8uudR0Y JDeveloper JDeveloper & ADF Entity Attribute Validation Rule (Business Rule) based on Master View Object Attribute Example ADF 11g t.co/1agxEQcZ oracletechnet Justin Kestelyn Webcast: Oracle WebLogic Server 12c Launch/Developer Deep-Dive (Dec. 1) t.co/OVBdGKzC JDeveloper JDeveloper & ADF How to render different node icons for different tree levels dlvr.it/wY2jL JDeveloper JDeveloper & ADF Query Component with ‘dynamic’ view criteria dlvr.it/wXlF1 JDeveloper JDeveloper & ADF How to play Flash .swf file in Oracle ADF application t.co/zaSONWAH Devoxx Devoxx Duke at the #Devoxx 2011 Noxx Party! pic.twitter.com/bVJWyu1Z brhubart Bob Rhubart Adam Leftik: JavaEE adoption continues to increase, reaching 40+ million downloads this year. #qconsf11 JDeveloper JDeveloper & ADF Free #ODTUG Seminar – #ADF Task Flows for Beginners – sign up today. www3.gotomeeting.com/register/13372… java Java New Project: OpenJFX j.mp/tI4k3s #javafx #openjdk #devoxx << JavaFX is open source! /via frankmunz Frank Munz WebLogic 12c launch event Dec 1st. t.co/jQKinBqN brhubart Bob Rhubart Spring to Java EE Migration | David Heffelfinger feedly.com/k/td8ccG odtug ODTUG Mark your calendars and register for our upcoming webinars: bit.ly/dWKG1C ADF Task Flows & Measuring Scalability & Performance w/TCP myfear Markus Eisele Anybody willing to take this question? Using #JavaMail with #Weblogic Server bit.ly/stJOET AMIS_Services AMIS Services 20-22 december #training #Oracle JHeadstart #11g, productief ontwikkelen met ADF. Schrijf je in op: amis.nl/trainingen/ora… AdamBien Adam Bien Stress Testing Java EE 6 Applications – Free Article In Free Java Magazine: In the November / December 2011 issu… bit.ly/vmzKkc java Java New Tech Article: Spring to #JavaEE Migration t.co/0EvdHNxb OracleBlogs OracleBlogs WebLogic Java record SPARC T4-4 Servers Set World Record on SPECjEnterprise2010 t.co/Eu1b6ZE0 OracleBlogs OracleBlogs What Is JavaFX? ow.ly/1frb6I OTNArchBeat OTNArchBeat The openJDK Windows Binary Download | Adam Bien ow.ly/7fRiG wlscommunity WebLogic Community WebLogic – Java record – SPARC T4-4 Servers Set World Record on SPECjEnterprise2010 glassfish GlassFish "youtube.com/java" blogs.oracle.com/theaquarium/en… OTNArchBeat OTNArchBeat Beta Testing Concludes: 1Z1-102 – "Oracle WebLogic Server 11g: System Administration I" (Oracle Certification) ow.ly/7fJCl wlscommunity WebLogic Community A deep dive in Oracle WebLogic! @ Contribute – November 29th, 2011 Kontich Belgium wp.me/p1LMIb-4u glassfish GlassFish Gartner’s Latest Enterprise Application Server Magic Quadrant – Oracle’s leadership t.co/aYDqipD8 OpenJDK OpenJDK Terrence Barr – Open sourcing of JavaFX: OpenJFX Project proposed – bit.ly/uKVnEl OpenJDK OpenJDK Maurizio Cimadamore – Testing overload resolution: bit.ly/vgXAbQ java Java Java User Groups Roundup, November 2011 : t.co/hea6vVnk /via @robilad << in German JavaSpotlight The Java Spotlight Java Spotlight Episode 54: Stuart Marks on the Coinification of JDK7 goo.gl/fb/3UXoM OTNArchBeat OTNArchBeat Article Series: Migrating Spring to Java EE 6 | Arun Gupta bit.ly/twUJtz glassfish GlassFish New Java EE 6 Hands-On lab, Devoxx-approved! bit.ly/vup5uE java Java Brian Goetz’s enthusiasm for Java is palpable! #devoxx interview adf_emg ADF EMG "ADF testing with a mock framework" – what is a mock framework? Visit the forum and see: groups.google.com/forum/#!topic/… java Java Taping a bunch of interviews today with Java experts at #devoxx. View on Parleys.com tomorrow. glassfish GlassFish New screencast to configure and run a cross-machine cluster using GlassFish 3.1.1 in < 7 mins faissalb.blogspot.com/2011/11/glassf… (via @bfaissal) glassfish GlassFish Oracle Contributor Agreements – New Home! bit.ly/tD2eLo OTNArchBeat OTNArchBeat Java Magazine – by and for the Java Community- inaugural issue bit.ly/tTv8UD OTNArchBeat OTNArchBeat The Heroes of Java: Michael Hüttermann | @MyFear bit.ly/rYYOFe javafx4you javafx4you Development with #JavaFX on #Linux j.mp/uOpe69 #not_for_the_faint_of_heart java Java Contribute Technical Questions for Java Experts at #devoxx bit.ly/up2cN0 netbeans NetBeans Team A simple REST service using #NetBeans 7, #Java Servlet, and #JAXB: t.co/pKkufsD8 AdamBien Adam Bien The most beautiful, and portable slide of the whole #jaxcon for "Die Hard Java EE 6"session checked-in: kenai.com/projects/javae… jaxlondon JAX London Mark Little’s (@nmcl) excellent keynote from #jaxlondon ‘Middleware Everywhere…’ is available in full – t.co/8vBmtDJ1 AdamBien Adam Bien Calculator sample from "Die Hard Java EE 6" #jaxcon session checked-in: t.co/0UqaULfg OTNArchBeat OTNArchBeat ADF Faces – a logic bomb in the order of bean instantiations | @ChrisCMuir bit.ly/vjqRaZ OracleBlogs OracleBlogs ODI 11g y JMS Queue de Weblogic ow.ly/1fzfQJ frankmunz Frank Munz Which WebLogic book do you recommend? Review of S. Alapati’s WebLogic 11g Administration Handbook. bit.ly/rP0RtW JDeveloper JDeveloper & ADF PageFlowScope with Unbounded Task Flows: the magic sauce for multi-browser-tab support in JDeveloper ADF applications dlvr.it/vNFgn OracleBlogs OracleBlogs 3 New ADF Insider Essential training videos published. ow.ly/1fz94q OracleBlogs OracleBlogs Weblogic Server 11gR1 PS2: Administration Essentials book and eBook t.co/ykzwIaqs OracleBlogs OracleBlogs Specialized Partners Only! New Service to Promote Your Events t.co/qTgyEpY4 wlscommunity WebLogic Community Oracle Weblogic Server 11gR1 PS2: Administration Essentials book and eBook andrejusb Andrejus Baranovskis Andrejus Baranovskis’s Blog: Stress Testing Oracle ADF BC Applications – Intern… andrejusb.blogspot.com/2011/11/stress… OracleBlogs OracleBlogs Frank Nimphius presenting a full day of Oracle ADF in Switzerland ow.ly/1fxU78 java Java #JavaEE and #GlassFish: #JavaOne11 Slides, Demos, Replays, Hands-on Labs t.co/tLM0ehrD OracleBlogs OracleBlogs weblogic.security.SecurityInitializationException: Authentication for user weblogic denied ow.ly/1fxmiu glassfish GlassFish The Last Migration – GlassFish Wiki : t.co/Dc5FT1SJ OTNArchBeat OTNArchBeat A Successful Year of @MiddlewareMagic t.co/amcGGTTk OracleWebLogic Oracle WebLogic Unbeatable Performance for your Cloud Applications with Exalogic, #OracleCoherence and #WebLogic. ow.ly/7lYKm OTNArchBeat OTNArchBeat Stress Testing Oracle ADF BC Applications – Passivation and Activation | @AndrejusB bit.ly/sASssL OTNArchBeat OTNArchBeat Review: "Oracle Weblogic Server 11gR1 PS2: Administration Essentials" by Michel Schildmeijer | @MyFear t.co/ll6ra0J9 OTNArchBeat OTNArchBeat GlassFish 3.1.2 themes and features | The Aquarium bit.ly/vVqr9r Andre_van_Dalen Andre van Dalen Masterclass: Advanced Oracle ADF 11g lnkd.in/M_45Pi AdamBien Adam Bien The "lunch" edition of RentACar is pushed into: kenai.com/projects/javae… #wjax AdamBien Adam Bien In munich, room munich at #wjax. Welcome to #javaee workshop. Gather your questions. 15 minutes to go lucasjellema Lucas Jellema Review by Markus of Michel’s book: t.co/41U9wvOb In short: valuable for novice WLS users, maybe not so much for die-hard WLS admin. biemond Edwin Biemond “@myfear: [blog] #Review: "#Weblogic Server 11gR1 PS2: Administration Essentials" t.co/LsODcb3e” got the same conclusion on amazon glassfish GlassFish Practical advice for deploying Lift apps to GlassFish: bit.ly/t3KUml glassfish GlassFish The unbearable lightness of GlassFish t.co/v9307SEJ javafx4you javafx4you Building Java EE applications in JavaFX: JavaFX 2.0, FXML and Spring j.mp/tiMDUh andrejusb Andrejus Baranovskis Andrejus Baranovskis’s Blog: Stress Testing Oracle ADF BC Applications – Passiv… andrejusb.blogspot.com/2011/11/stress… wlscommunity WebLogic Community “@AMIS_Services: Follow @amis_services To Win a copy of SOA Suite 11g Handbook by @lucasjellema dld.bz/axD22 pls RT” excellent book! glassfish GlassFish GlassFish 3.1.2 themes and features bit.ly/uEc6uZ biemond Edwin Biemond Weblogic pre-sales exam was hard, you really need to know the versions , upgrade path and have a score above 80% monkchips James Governor The Rise and Fall and Rise of Java. JAX 2011 london keynote. how big data and the web are floating the boat. slidesha.re/u3Kzlo glassfish GlassFish Tab Sweep – Jersey, Hudson, GlassFish Hosting, GC’s compared, Spring to JavaEE, Modularity, … bit.ly/u9Cc30 oracletechnet Justin Kestelyn Oracle Tuxedo: A renewed acquaintance t.co/gp0mmf20 OTNArchBeat OTNArchBeat Oracle Enterprise Pack for Eclipse, OEPE 11.1.1.8 bit.ly/tC3eKp OracleBlogs OracleBlogs NetBeans HTML Editor and Groovy Editor in a Multiview Component (Part 2) ow.ly/1ftCeI myfear Markus Eisele [blog] #Oracle 2008 – 2011 in Gartners Magic Quadrant for Enterprise Application Servers t.co/2Bs1vgMZ myfear Markus Eisele [blog] #EclipseCon Europe – Java 7 in the Enterprise goo.gl/fb/r80df #ece2011 #java7 javafx4you javafx4you JavaFX 2.0 for Mac build b07 (developer preview) is available for download j.mp/vSwmBP Enjoy! #JavaFX #Mac OracleBlogs OracleBlogs A deep dive in Oracle WebLogic! @ Contribute November 29th, 2011 Kontich Belgium ow.ly/1fsEZs arungupta Arun Gupta #JavaEE7 slides from #jaxlondon and #jfall11 now available: slidesha.re/sh4iFq AdamBien Adam Bien Just checked-in the results of the #jaxlondon community night (somehow beer related): kenai.com/projects/javae… glassfish GlassFish GlassFish Podcast Episode #080 – User Stories, Part 3: Adam Bien and Sean Comerford (ESPN) blogs.oracle.com/glassfishpodca… glassfish GlassFish Story: t.co/jQPqihJb using GlassFish blogs.oracle.com/stories/entry/… "3000+ requests/sec" and more enterprisejava Java EE Mentions New blog post WebLogic deployment status checks for CI wp.me/pOOSs-F #weblogic #continuousintegration /vi… bit.ly/uZz0fk The become a member in the WebLogic Partner Community please first login at http://partner.oracle.com and then visit: http://www.oracle.com/partners/goto/wls-emea Blog Twitter LinkedIn Mix Forum Wiki Technorati Tags: twitter,WebLogic,WebLogic Community,OPN,Oracle,Jürgen Kress

    Read the article

  • CodePlex Daily Summary for Saturday, March 10, 2012

    CodePlex Daily Summary for Saturday, March 10, 2012Popular ReleasesPlayer Framework by Microsoft: Player Framework for Windows 8 Metro (BETA): Player Framework for HTML/JavaScript and XAML/C# Metro Style Applications.WPF Application Framework (WAF): WAF for .NET 4.5 (Experimental): Version: 2.5.0.440 (Experimental): This is an experimental release! It can be used to investigate the new .NET Framework 4.5 features. The ideas shown in this release might come in a future release (after 2.5) of the WPF Application Framework (WAF). More information can be found in this dicussion post. Requirements .NET Framework 4.5 (The package contains a solution file for Visual Studio 11) The unit test projects require Visual Studio 11 Professional Changelog All: Upgrade all proje...SSH.NET Library: 2012.3.9: There are still few outstanding issues I wanted to include in this release but since its been a while and there are few new features already I decided to create a new release now. New Features Add SOCKS4, SOCKS5 and HTTP Proxy support when connecting to remote server. For silverlight only IP address can be used for server address when using proxy. Add dynamic port forwarding support using ForwardedPortDynamic class. Add new ShellStream class to work with SSH Shell. Add supports for mu...Test Case Import Utilities for Visual Studio 2010 and Visual Studio 11 Beta: V1.2 RTM: This release (V1.2 RTM) includes: Support for connecting to Hosted Team Foundation Server Preview. Support for connecting to Team Foundation Server 11 Beta. Fix to issue with read-only attribute being set for LinksMapping-ReportFile which may have led to problems when saving the report file. Fix to issue with “related links” not being set properly in certain conditions. Fix to ensure that tool works fine when the Excel file contained rich text data. Note: Data is still imported in pl...Audio Pitch & Shift: Audio Pitch And Shift 3.5.0: Modules (mod, xm, it, etc..) supportcallisto: callisto 2.0.19: BUG FIX: Autorun.load() function in scripting now has sandboxed path (Thanks Mikey!) BUG FIX: UserObject.Name property now allows full 20 byte string replacements. FEATURE REQUEST: File.* script functions now allow file extensions.EntitiesToDTOs - Entity Framework DTO Generator: EntitiesToDTOs.v2.1: Changelog Fixed template file access issue on Win7. Fix on configuration load when target project was not found and "Use project default namespace" was checked. Minor fix on loading latest configuration at startup. Minor fix in VisualStudioHelper class. DTO's properties accessors are now in one line. Improvements in PropertyHelper to get a cleaner and more performant code. Added Website project type as a not supported project type. Using Error List pane from VS IDE to show Enti...DotNetNuke® Community Edition CMS: 06.01.04: Major Highlights Fixed issue with loading the splash page skin in the login, privacy and terms of use pages Fixed issue when searching for words with special characters in them Fixed redirection issue when the user does not have permissions to access a resource Fixed issue when clearing the cache using the ClearHostCache() function Fixed issue when displaying the site structure in the link to page feature Fixed issue when inline editing the title of modules Fixed issue with ...Mayhem: Mayhem Developer Preview: This is the developer preview of Mayhem. Enjoy!Team Foundation Server Process Template Customization Guidance: v1 - For Visual Studio 11: Welcome to the BETA release of the Team Foundation Server Process Template Customization preview. As this is a BETA release and the quality bar for the final Release has not been achieved, we value your candid feedback and recommend that you do not use or deploy these BETA artifacts in a production environment. Quality-Bar Details Documentation has been reviewed by Visual Studio ALM Rangers Documentation has not been through an independent technical review Documentation has not been rev...Magelia WebStore Open-source Ecommerce software: Magelia WebStore 1.2: Medium trust compliant lot of small change for medium trust compliance full refactoring of user management refactoring of Client Refactoring of user management Magelia.WebStore.Client no longer reference Magelia.WebStore.Services.Contract Refactoring page category multi parent category added copy category feature added Refactoring page catalog copy catalog feature added variant management improvement ability to define a default variant for a variable product ability to ord...PDFsharp - A .NET library for processing PDF: PDFsharp and MigraDoc Foundation 1.32: PDFsharp and MigraDoc Foundation 1.32 is a stable version that fixes a few bugs that were found with version 1.31. Version 1.32 includes solutions for Visual Studio 2010 only (but it should be possible to add the project files to existing solutions for VS 2005 or VS 2008). Users of VS 2005 or VS 2008 can still download version 1.31 with the solutions for those versions that allow them to easily try the samples that are included. While it may create smaller PDF files than version 1.30 because...Terminals: Version 2.0 - Release: Changes since version 1.9a:New art works New usability in Organize favorites window Improved usability of imports/exports and scans Large number of fixes Improvements in single instance mode Comparing November beta 4, this corrects: New application icons Doesn't show Logon error codes Fixed command line arguments exception for single instance mode Fixed detaching of tabs improved usability in detached window Fixed option settings for Capture manager Fixed system tray noti...MFCMAPI: March 2012 Release: Build: 15.0.0.1032 Full release notes at SGriffin's blog. If you just want to run the MFCMAPI or MrMAPI, get the executables. If you want to debug them, get the symbol files and the source. The 64 bit builds will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit builds, regardless of the operating system. Facebook BadgeTortoiseHg: TortoiseHg 2.3.1: bugfix releaseSimple Injector: Simple Injector v1.4.1: This release adds two small improvements to the SimpleInjector.Extensions.dll. No changes have been made to the core library. New features and improvements in this release for the SimpleInjector.Extensions.dll The RegisterManyForOpenGeneric extension methods now accept non-generic decorator, as long as they implement the given open generic service type. GetTypesToRegister methods added to the OpenGenericBatchRegistrationExtensions class which allows to customize the behavior. Note that the...CommonLibrary: Code: CodeVidCoder: 1.3.1: Updated HandBrake core to 0.9.6 release (svn 4472). Removed erroneous "None" container choice. Change some logic and help text to stop assuming you have to pick the VIDEO_TS folder for a DVD scan. This should make previewing DVD titles on the Queue Multiple Titles window possible when you've picked the root DVD directory.Google Books Downloader for Windows: Google Books Downloader: Google Books Downloader 1.8ExtAspNet: ExtAspNet v3.1.0: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://extasp.net/ ??:http://bbs.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-03-04 v3.1.0 -??Hidden???????(〓?〓)。 -?PageManager??...New ProjectsAres Backup: Ares Backup is a Backup software which can save bytediffs and provides several storage plugins.BackItUp: Backup-Tool für Visual Studio Projektebinbin domain: binbin domain Blexus Service Plattform: Some cool stuff about Wcf Services. - can communicate files - can communicate xaml objects (generate dynamically Gui) CardPlay - a Solitaire Framework for .Net: CardPlay is a C# framework for developing Solitaire card games. The solution includes a sample WPF client along with over 100 games.Cloud Files Upload: Windows application to script cloud file uploads.Code First API Library, Scaffolding & Guidance for Coded UI Tests: Code first Coded UI Tests for web apps. Library, Scaffolding and Guidance.CPEBook by FMUG & TPAY: CPEBook by MUG & TPAY Projet dot NET CPEBookDot Net Application String Resources Viewer: Dot Net Application String Resources ViewerFilter for SharePoint Web Settings Page: This solution show a simple way to integrate a filter box by using jquery, a global farm feature and a simple delegate control for AdditionalPageHead.Google Books Downloader for Windows: Save Google books in PDF, JPEG or PNG format.GUIToolkit: C++ Windowless GUI,DirectUIHarvest Sports: Harvest SportsInfoPath Analyzer: InfoPath Analyzer makes InfoPath form development and troubleshooting much easier. You're easy to find the relationship between controls and data fields, search data fields or controls by name, edit InfoPath inner html directly.Kinectsignlanguage project: This project will help kinect be used for sign language to speech so that sign language people can be understood while talking to important people. LotteryVote: ????manager123: Trying out CodePlexMcRegister: McRegister is an asp.net mvc 3 razor website that enables you to register users on your minecraft server it works in conjunction with a minecraft mod called EasyAuth.MetroTipi: HelloTipi Sous l'interface Metro de Windows 8Microsoft AppFactory: AppFactory is a powerful data-driven build system for Windows Phone (and soon Windows 8) projects. Its purpose is to help developers start with template projects and turn them into suites of applications.MiniStock: MiniStock is an experimental reference architecture for scalable cloud-based architectures. Implemented in .net.online book shopping: online book shoppingScopa: Carousel Team Scopa per WP7 XNA testtom03092012tfs01: testtom03092012tfs01UsingLib: A library of automatically removed utilities: 1.Changing cursor to hourglass in Windows Forms 2.Logging It's developed in C#WHMCS Library: WHMCS is an all-in-one client management, billing & support solution for online businesses. Handling everything from signup to termination, WHMCS is a powerful business automation tool that puts you firmly in control. The WHMCS Library is a .NET wrapper for the WHMCS API. Written entirely in C# but really easy to port over to VB.NET. Coming from a VB.NET background we tried hard to make sure porting would be simple for VB.NET community members. ZoneEditService: Windows service to update ZoneEdit for dynamic dns.

    Read the article

  • SSAS Compare: an intern’s journey

    - by Red Gate Software BI Tools Team
    About a month ago, David mentioned an intern working in the BI Tools Team. That intern happens to be me! In five weeks’ time, I’ll start my second year of Computer Science at the University of Cambridge and be a full-time student again, but for the past eight weeks, I’ve been living a completely different life. As Jon mentioned before, the teams here at Red Gate are small and everyone (including the interns!) is responsible for the product as a whole. I’ve attended planning sessions, UX tests, daily meetings, and everything else a full-time member of the team would; I had as much say in where we would go next with the product as anyone; I was able to see that what I was doing was an important part of the product from the feedback we got in the UX tests. All these things almost made me forget that this is just an internship and not my full-time job. First steps at Red Gate Being based in Cambridge, Red Gate has many Cambridge university graduates working for them. They also hire some Cambridge undergraduates for internships each summer. With its popularity with university graduates and its great working environment, Red Gate has managed to build up a great reputation. When I thought of doing an internship here in Cambridge, Red Gate just seemed to be the obvious choice for my first real work experience. On my first day at Red Gate, David, the lead developer for SSAS Compare, helped me settle in and explained what I’d be doing. My task was to improve the user experience of displaying differences between MDX scripts by syntax highlighting, script formatting, and improving the difference identification in the first place. David suggested how I should approach the problem, but left all the details and design decisions to me. That was when I realised how much independence and responsibility I’d have. What I’ve done If you launch the latest version of SSAS Compare and drill down to an MDX script difference, you can see the changes that have been made. In earlier versions, you could only see the scripts in plain text on both sides — either in black or grey, depending on whether they were the same or not. However, you couldn’t see exactly where the scripts were different, which was especially annoying when the two scripts were large – as they often are. Furthermore, if parts of the two scripts were formatted differently, they seemed to be different but were actually the same, which caused even more confusion and made it difficult to see where the differences were. All these issues have been fixed now. The two scripts are automatically formatted by the tool so that if two things are syntactically equivalent, they look the same – including case differences in keywords! The actual difference is highlighted in grey, which makes them easy to spot. The difference identification has been improved as well, so two scripts aren’t identified as different if there’s just a difference in meaningless whitespace characters, or when you have “select” on one side and “SELECT” on the other. We also have syntax highlighting, which makes it easier to read the scripts. How I did it In order to do the formatting properly, we decided to parse the MDX scripts. After some investigation into parser builders, I decided to go with the GOLD Parser builder and the bsn-goldparser .NET engine. GOLD Parser builder provides a fairly nice GUI to write, build, and test grammar in. We also liked the idea of separating the grammar building from parsing a text. The bsn-goldparser is one of many .NET engines for GOLD, and although it doesn’t support the newest features of GOLD Parser, it has “the ability to map semantic action classes to terminals or reduction rules, so that a completely functional semantic AST can be created directly without intermediate token AST representation, and without the need for glue code.” That makes it much easier for us to change the implementation in our program when we change the grammar. As bsn-goldparser is open source, and I wanted some more features in it, I contributed two new features which have now been merged to the project. Unfortunately, there wasn’t an MDX grammar written for GOLD already, so I had to write it myself. I was referencing MSDN to get the formal grammar specification, but the specification was all over the place, so it wasn’t that easy to implement and find. We’re aware that we don’t yet fully support all valid MDX, so sometimes you’ll just see the MDX script difference displayed the old way. In that case, there is some grammar construct we don’t yet recognise. If you come across something SSAS Compare doesn’t recognise, we’d love to hear about it so we can add it to our grammar. When some MDX script gets parsed, a tree is produced. That tree can then be processed into a list of inlines which deal with the correct formatting and can be outputted to the screen. Doing all this has led me to many new technologies and projects I haven’t worked with before. This was my first experience with C# and Visual Studio, although I have done things in Java before. I have learnt how to unit test with NUnit, how to do dependency injection with Ninject, how to source-control code with SVN and Mercurial, how to build with TeamCity, how to use GOLD, and many other things. What’s coming next Sadly, my internship comes to an end this week, so there will be less development on MDX difference view for a while. But the team is going to work on marking the differences better and making it consistent with difference indication in the top part of comparison window, and will keep adding support for more MDX grammar so you can see the differences easily in every comparison you make. So long! And maybe I’ll see you next summer!

    Read the article

  • Surface development: it&rsquo;s just like software development

    - by Dennis Vroegop
    Surface is magic. Everyone using it seems to think that way. And I have to be honest, after working for almost 2 years with the platform I still get that special feeling the moment I turn on the unit to do some more work. The whole user experience, the rich environment of the SDK, the touch, even the look and feel of the Surface environment is so much different from the stuff I’ve been working on all my career that I am still bewildered by it. But… and this is a big but.. in the end we’re still talking about a computer and that needs software to become useful. Deep down the magic of the Surface unit there is a PC somewhere, running Windows Vista and the .net framework 3.5. When you write that magic software that makes the platform come alive you’re still working with .net, WPF/XNA, C#, VB.Net and all those other tools and technologies you know so well. Sure, the whole user experience is different from what you’ve known. And the way of thinking about users, their interaction and the positioning of screen elements requires a whole new paradigm. And that takes time. It took me about half a year before I had the feeling I got it nailed down. But when that moment came (about 18 months ago…) I realized that everything I had learned so far on software development still is true when it comes to Surface. The last 6 months I have been working with some people with a different background to start a new company. The idea was that the new company would be focussing on Surface and Surface only. These people come from a marketing background and had some good ideas for some applications. And I have to admit: their ideas were good. Very good. Where it all fell down of course is that these ideas need to be implemented in a piece of software. And creating great software takes skilled developers and a lot of time and money. That’s where things went wrong: the marketing guys didn’t realize and didn’t want to realize that software development is a job that takes skill. You can’t just hire a bunch of developers and expect them to deliver the best sort of software, especially not when it comes to Surface. I tried to explain that yes, their User Interface in Photoshop looked great, but no: I couldn’t develop an application like that in a weeks time. Even worse: the while backend of the software (WCF for communications, SQL Server for the database, etc) would take a lot more time than the frontend. They didn’t understand. It took them a couple of days to drawn the UI in Photoshop so in Blend I should be able to build the software in about the same amount of time. Well, you and I know that it doesn’t work that way. Software is hard to write, and even harder to write well, and it takes skill and dedication. It’s not something you can do as fast as you can draw a mock up for a Surface application in Photohop. The same holds true for web applications of course. A lot of designers there fail to appreciate the hard work that goes into writing the plumbing for a good web app that can handle thousands of users. Although the UI is very important, it’s not all there is to it. And in Surface development this is the same. The UI should create the feeling of magic, but the software behind it is what makes it come alive. And that takes time. A lot of time. So brush of you skills and don’t throw them away if you start developing for Surface. Because projects (and colaborations) can fail there as hard as they can in any other area of software development. On a side note: we decided to stop the colaboration (something the other parties involved didn’t appreciate and were very angry about) and decided to hire a designer for the Surface projects. The focus is back where it belongs: on the software development we know so well and have been doing very well for 13 years. UI is just a part of the whole project and not the end product. So my company Detrio is still going strong when it comes to develivering Surface solutions but once again from a technological background, not a marketing background.

    Read the article

  • Adopting DBVCS

    - by Wes McClure
    Identify early adopters Pick a small project with a small(ish) team.  This can be a legacy application or a green-field application. Strive to find a team of early adopters that will be eager to try something new. Get the team on board! Research Research the tool(s) that you want to use.  Some tools provide all of the features you would need while some only provide a slice of the pie.  DBVCS requires the ability to manage a set of change scripts that update a database from one version to the next.  Ideally a tool can track database versions and automatically apply updates.  The change script generation process can be manual, but having diff tools available to automatically generate it can really reduce the overhead to adoption.  Finally, an automated tool to generate a script file per database object is an added bonus as your version control system can quickly identify what was changed in a commit (add/del/modify), just like with code changes. Don’t settle on just one tool, identify several.  Then work with the team to evaluate the tools.  Have the team do some tests of the following scenarios with each tool: Baseline an existing database: can the migration tool work with legacy databases?  Caution: most migration platforms do not support baselines or have poor support, especially the fad of fluent APIs. Add/drop tables Add/drop procedures/functions/views Alter tables (rename columns, add columns, remove columns) Massage data – migrations sometimes involve changing data types that cannot be implicitly casted and require you to decide how the data is explicitly cast to the new type.  This is a requirement for a migrations platform.  Think about a case where you might want to combine fields, or move a field from one table to another, you wouldn’t want to lose the data. Run the tool via the command line.  If you cannot automate the tool in Continuous Integration what is the point? Create a copy of a database on demand. Backup/restore databases locally. Let the team give feedback and decide together, what tool they would like to try out. My recommendation at this point would be to include TSqlMigrations and RoundHouse as SQL based migration platforms.  In general I would recommend staying away from the fluent platforms as they often lack baseline capabilities and add overhead to learn a new API when SQL is already a very well known DSL.  Code migrations often get messy with procedures/views/functions as these have to be created with SQL and aren’t cross platform anyways.  IMO stick to SQL based migrations. Reconciling Production If your project is a legacy application, you will need to reconcile the current state of production with your development databases.  Find changes in production and bring them down to development, even if they are old and need to be removed.  Once complete, produce a baseline of either dev or prod as they are now in sync.  Commit this to your VCS of choice. Add whatever schema changes tracking mechanism your tool requires to your development database.  This often requires adding a table to track the schema version of that database.  Your tool should support doing this for you.  You can add this table to production when you do your next release. Script out any changes currently in dev.  Remove production artifacts that you brought down during reconciliation.  Add change scripts for any outstanding changes in dev since the last production release.  Commit these to your repository.   Say No to Shared Dev DBs Simply put, you wouldn’t dream of sharing a code checkout, why would you share a development database?  If you have a shared dev database, back it up, distribute the backups and take the shared version offline (including the dev db server once all projects are using DB VCS).  Doing DB VCS with a shared database is bound to cause problems as people won’t be able to easily script out their own changes from those that others are working on.   First prod release Copy prod to your beta/testing environment.  Add the schema changes table (or mechanism) and do a test run of your changes.  If successful you can schedule this to be run on production.   Evaluation After your first release, evaluate the pain points of the process.  Try to find tools or modifications to existing tools to help fix them.  Don’t leave stones unturned, iteratively evolve your tools and practices to make the process as seamless as possible.  This is why I suggest open source alternatives.  Nothing is set in stone, a good example was adding transactional support to TSqlMigrations.  We ran into situations where an update would break a database, so I added a feature to do transactional updates and rollback on errors!  Another good example is generating change scripts.  We have been manually making these for months now.  I found an open source project called Open DB Diff and integrated this with TSqlMigrations.  These were things we just accepted at the time when we began adopting our tool set.  Once we became comfortable with the base functionality, it was time to start automating more of the process.  Just like anything else with development, never be afraid to try to find tools to make your job easier!   Enjoy -Wes

    Read the article

  • ASP.NET MVC HandleError Attribute

    - by Ben Griswold
    Last Wednesday, I took a whopping 15 minutes out of my day and added ELMAH (Error Logging Modules and Handlers) to my ASP.NET MVC application.  If you haven’t heard the news (I hadn’t until recently), ELMAH does a killer job of logging and reporting nearly all unhandled exceptions.  As for handled exceptions, I’ve been using NLog but since I was already playing with the ELMAH bits I thought I’d see if I couldn’t replace it. Atif Aziz provided a quick solution in his answer to a Stack Overflow question.  I’ll let you consult his answer to see how one can subclass the HandleErrorAttribute and override the OnException method in order to get the bits working.  I pretty much took rolled the recommended logic into my application and it worked like a charm.  Along the way, I did uncover a few HandleError fact to which I wasn’t already privy.  Most of my learning came from Steven Sanderson’s book, Pro ASP.NET MVC Framework.  I’ve flipped through a bunch of the book and spent time on specific sections.  It’s a really good read if you’re looking to pick up an ASP.NET MVC reference. Anyway, my notes are found a comments in the following code snippet.  I hope my notes clarify a few things for you too. public class LogAndHandleErrorAttribute : HandleErrorAttribute {     public override void OnException(ExceptionContext context)     {         // A word from our sponsors:         //      http://stackoverflow.com/questions/766610/how-to-get-elmah-to-work-with-asp-net-mvc-handleerror-attribute         //      and Pro ASP.NET MVC Framework by Steven Sanderson         //         // Invoke the base implementation first. This should mark context.ExceptionHandled = true         // which stops ASP.NET from producing a "yellow screen of death." This also sets the         // Http StatusCode to 500 (internal server error.)         //         // Assuming Custom Errors aren't off, the base implementation will trigger the application         // to ultimately render the "Error" view from one of the following locations:         //         //      1. ~/Views/Controller/Error.aspx         //      2. ~/Views/Controller/Error.ascx         //      3. ~/Views/Shared/Error.aspx         //      4. ~/Views/Shared/Error.ascx         //         // "Error" is the default view, however, a specific view may be provided as an Attribute property.         // A notable point is the Custom Errors defaultRedirect is not considered in the redirection plan.         base.OnException(context);           var e = context.Exception;                  // If the exception is unhandled, simply return and let Elmah handle the unhandled exception.         // Otherwise, try to use error signaling which involves the fully configured pipeline like logging,         // mailing, filtering and what have you). Failing that, see if the error should be filtered.         // If not, the error simply logged the exception.         if (!context.ExceptionHandled                || RaiseErrorSignal(e)                   || IsFiltered(context))                  return;           LogException(e); // FYI. Simple Elmah logging doesn't handle mail notifications.     }

    Read the article

  • Option Trading: Getting the most out of the event session options

    - by extended_events
    You can control different aspects of how an event session behaves by setting the event session options as part of the CREATE EVENT SESSION DDL. The default settings for the event session options are designed to handle most of the common event collection situations so I generally recommend that you just use the defaults. Like everything in the real world though, there are going to be a handful of “special cases” that require something different. This post focuses on identifying the special cases and the correct use of the options to accommodate those cases. There is a reason it’s called Default The default session options specify a total event buffer size of 4 MB with a 30 second latency. Translating this into human terms; this means that our default behavior is that the system will start processing events from the event buffer when we reach about 1.3 MB of events or after 30 seconds, which ever comes first. Aside: What’s up with the 1.3 MB, I thought you said the buffer was 4 MB?The Extended Events engine takes the total buffer size specified by MAX_MEMORY (4MB by default) and divides it into 3 equally sized buffers. This is done so that a session can be publishing events to one buffer while other buffers are being processed. There are always at least three buffers; how to get more than three is covered later. Using this configuration, the Extended Events engine can “keep up” with most event sessions on standard workloads. Why is this? The fact is that most events are small, really small; on the order of a couple hundred bytes. Even when you start considering events that carry dynamically sized data (eg. binary, text, etc.) or adding actions that collect additional data, the total size of the event is still likely to be pretty small. This means that each buffer can likely hold thousands of events before it has to be processed. When the event buffers are finally processed there is an economy of scale achieved since most targets support bulk processing of the events so they are processed at the buffer level rather than the individual event level. When all this is working together it’s more likely that a full buffer will be processed and put back into the ready queue before the remaining buffers (remember, there are at least three) are full. I know what you’re going to say: “My server is exceptional! My workload is so massive it defies categorization!” OK, maybe you weren’t going to say that exactly, but you were probably thinking it. The point is that there are situations that won’t be covered by the Default, but that’s a good place to start and this post assumes you’ve started there so that you have something to look at in order to determine if you do have a special case that needs different settings. So let’s get to the special cases… What event just fired?! How about now?! Now?! If you believe the commercial adage from Heinz Ketchup (Heinz Slow Good Ketchup ad on You Tube), some things are worth the wait. This is not a belief held by most DBAs, particularly DBAs who are looking for an answer to a troubleshooting question fast. If you’re one of these anxious DBAs, or maybe just a Program Manager doing a demo, then 30 seconds might be longer than you’re comfortable waiting. If you find yourself in this situation then consider changing the MAX_DISPATCH_LATENCY option for your event session. This option will force the event buffers to be processed based on your time schedule. This option only makes sense for the asynchronous targets since those are the ones where we allow events to build up in the event buffer – if you’re using one of the synchronous targets this option isn’t relevant. Avoid forgotten events by increasing your memory Have you ever had one of those days where you keep forgetting things? That can happen in Extended Events too; we call it dropped events. In order to optimizes for server performance and help ensure that the Extended Events doesn’t block the server if to drop events that can’t be published to a buffer because the buffer is full. You can determine if events are being dropped from a session by querying the dm_xe_sessions DMV and looking at the dropped_event_count field. Aside: Should you care if you’re dropping events?Maybe not – think about why you’re collecting data in the first place and whether you’re really going to miss a few dropped events. For example, if you’re collecting query duration stats over thousands of executions of a query it won’t make a huge difference to miss a couple executions. Use your best judgment. If you find that your session is dropping events it means that the event buffer is not large enough to handle the volume of events that are being published. There are two ways to address this problem. First, you could collect fewer events – examine you session to see if you are over collecting. Do you need all the actions you’ve specified? Could you apply a predicate to be more specific about when you fire the event? Assuming the session is defined correctly, the next option is to change the MAX_MEMORY option to a larger number. Picking the right event buffer size might take some trial and error, but a good place to start is with the number of dropped events compared to the number you’ve collected. Aside: There are three different behaviors for dropping events that you specify using the EVENT_RETENTION_MODE option. The default is to allow single event loss and you should stick with this setting since it is the best choice for keeping the impact on server performance low.You’ll be tempted to use the setting to not lose any events (NO_EVENT_LOSS) – resist this urge since it can result in blocking on the server. If you’re worried that you’re losing events you should be increasing your event buffer memory as described in this section. Some events are too big to fail A less common reason for dropping an event is when an event is so large that it can’t fit into the event buffer. Even though most events are going to be small, you might find a condition that occasionally generates a very large event. You can determine if your session is dropping large events by looking at the dm_xe_sessions DMV once again, this time check the largest_event_dropped_size. If this value is larger than the size of your event buffer [remember, the size of your event buffer, by default, is max_memory / 3] then you need a large event buffer. To specify a large event buffer you set the MAX_EVENT_SIZE option to a value large enough to fit the largest event dropped based on data from the DMV. When you set this option the Extended Events engine will create two buffers of this size to accommodate these large events. As an added bonus (no extra charge) the large event buffer will also be used to store normal events in the cases where the normal event buffers are all full and waiting to be processed. (Note: This is just a side-effect, not the intended use. If you’re dropping many normal events then you should increase your normal event buffer size.) Partitioning: moving your events to a sub-division Earlier I alluded to the fact that you can configure your event session to use more than the standard three event buffers – this is called partitioning and is controlled by the MEMORY_PARTITION_MODE option. The result of setting this option is fairly easy to explain, but knowing when to use it is a bit more art than science. First the science… You can configure partitioning in three ways: None, Per NUMA Node & Per CPU. This specifies the location where sets of event buffers are created with fairly obvious implication. There are rules we follow for sub-dividing the total memory (specified by MAX_MEMORY) between all the event buffers that are specific to the mode used: None: 3 buffers (fixed)Node: 3 * number_of_nodesCPU: 2.5 * number_of_cpus Here are some examples of what this means for different Node/CPU counts: Configuration None Node CPU 2 CPUs, 1 Node 3 buffers 3 buffers 5 buffers 6 CPUs, 2 Node 3 buffers 6 buffers 15 buffers 40 CPUs, 5 Nodes 3 buffers 15 buffers 100 buffers   Aside: Buffer size on multi-processor computersAs the number of Nodes or CPUs increases, the size of the event buffer gets smaller because the total memory is sub-divided into more pieces. The defaults will hold up to this for a while since each buffer set is holding events only from the Node or CPU that it is associated with, but at some point the buffers will get too small and you’ll either see events being dropped or you’ll get an error when you create your session because you’re below the minimum buffer size. Increase the MAX_MEMORY setting to an appropriate number for the configuration. The most likely reason to start partitioning is going to be related to performance. If you notice that running an event session is impacting the performance of your server beyond a reasonably expected level [Yes, there is a reasonably expected level of work required to collect events.] then partitioning might be an answer. Before you partition you might want to check a few other things: Is your event retention set to NO_EVENT_LOSS and causing blocking? (I told you not to do this.) Consider changing your event loss mode or increasing memory. Are you over collecting and causing more work than necessary? Consider adding predicates to events or removing unnecessary events and actions from your session. Are you writing the file target to the same slow disk that you use for TempDB and your other high activity databases? <kidding> <not really> It’s always worth considering the end to end picture – if you’re writing events to a file you can be impacted by I/O, network; all the usual stuff. Assuming you’ve ruled out the obvious (and not so obvious) issues, there are performance conditions that will be addressed by partitioning. For example, it’s possible to have a successful event session (eg. no dropped events) but still see a performance impact because you have many CPUs all attempting to write to the same free buffer and having to wait in line to finish their work. This is a case where partitioning would relieve the contention between the different CPUs and likely reduce the performance impact cause by the event session. There is no DMV you can check to find these conditions – sorry – that’s where the art comes in. This is  largely a matter of experimentation. On the bright side you probably won’t need to to worry about this level of detail all that often. The performance impact of Extended Events is significantly lower than what you may be used to with SQL Trace. You will likely only care about the impact if you are trying to set up a long running event session that will be part of your everyday workload – sessions used for short term troubleshooting will likely fall into the “reasonably expected impact” category. Hey buddy – I think you forgot something OK, there are two options I didn’t cover: STARTUP_STATE & TRACK_CAUSALITY. If you want your event sessions to start automatically when the server starts, set the STARTUP_STATE option to ON. (Now there is only one option I didn’t cover.) I’m going to leave causality for another post since it’s not really related to session behavior, it’s more about event analysis. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • Social Network Updates: While You Were Busy Marketing 2

    - by Mike Stiles
    Since social moves at the speed of data, it’s already time for another update, as we did back in April, on the changes the various social networks have made or gone through while you were busy marketing. Facebook There’s a lot of talk Facebook’s developing a mobile product to act like Flipboard and surface news, from both users and media outlets. The biggest news was Facebook/Instagram’s introduction of 15-second videos, enhanced with with filters, to take some of Vine’s candy. You can also delete parts of videos and rerecord them, and there’s image stabilization. Facebook’s ad revenue is coming along just fine, thank you very much. 35% quarter-to-quarter growth in Q2. And it looks like new formats like Mobile App Install Ads and Unpublished Page Posts are adding to the mix. If you don’t already, you’ll soon see a little camera in comment boxes letting you insert photos right into the comments you make. The drive toward “more visual” continues. The other big news is Facebook’s adoption of our Twitter friend, the hashtag. Adding # sets apart the post topic so it can be easily found or discovered. It’s also being added to Google Plus, Tumblr, and Pinterest. Twitter Want to send someone a promoted tweet when they’re in range of your store? That could be happening by the end of this year. Some users have been seeing automatic in-stream previews of images on Twitter.com. Right now it’s images in your own tweets, but we can assume all tweets are next. Get your followers organized! Twitter raised the limit on the number of lists you can create from 20 to 1,000. They also raised the number of accounts you can have in a list from 500 to 5,000. Twitter started notifying you when someone favorites a tweet you’re mentioned in or re-tweets a tweet you re-tweeted. Anyway, it’s the first time Twitter’s notified you about indirect interactions like that. Who’s afraid of Instagram? A study shows 6-second Vine videos are being posted to Twitter at the rate of 9/second, up from 5/second 2 months ago. Vine has over 13 million users and branded Vines are 4x more likely to be shared than video ads. Google Plus Now featuring a 3-column redesigned stream, and images that take up a whole column. And photo filters Auto Highlight and Auto Awesome work to turn your photos into a real show. Google Hangouts is the workhorse for all Google messaging now, it’s not just an online chat with 9 people anymore. Google Plus Dashboard improves the connection between your company’s Google Plus business page and your Google Plus Local. Updates go out across all Google properties and you can do your managing from the dashboard. With Google Plus’ authorship system, you can build “Author Rank” based on what you write and put on the web. If your stuff is +1’ed and shared a lot, you’re the real deal and there are search result benefits. LinkedIn "Who's Viewed Your Updates" shows you what you’ve shared recently, who saw it and what they did about it in real-time. “Influencers” is, well, influential. Traffic to all LI news products has gone up 8x since it was introduced. LinkedIn is quickly figuring out how to get users to stick around awhile. You and your brand can post images and documents in status updates now. In fact, that whole “document posting” thing is making some analysts wonder if LinkedIn will drift on over to the Dropboxes and YouSendIts of the world. C’mon, admit it. Your favorite part of LinkedIn is being able to see who’s viewed your profile. Now you’ve got even more info and can see what/who you have in common. Premium users get even deeper insights about how people are finding them. If you’re a big fan of security, you’ll love that LinkedIn started offering two-factor authentication (2FA). It’s optional, but step 2 is a one-time code texted to your registered mobile. Pinterest A study showed pins have a looong shelf life compared to other social net posts. “Clicks kept coming for 30 days and beyond.” Most pins are timeless, and the infinite scroll causes people to see older pins. Is it a keeper? Pinterest jumped 82% to 54 million users in the past year. It’s valued at $2.5 billion and is one of the biggest sources of referral traffic there is. That said, CEO Ben Silbermann adds, "Right now, we don't make money." A new search feature stops you from having to endlessly scroll through your own pins looking for that waterfall picture you posted. Simply select “just my pins” in the search bar. New "Rich Pins" lets brands add info like price and availability to pins that can be updated daily via a data feed from your merchant site. Not so fast, you have to apply to Pinterest for it first. Like other social nets, Pinterest does not allow sexual content, nudity, or even partial nudity. However…some art contains nudity, and Pinterest wants to allow art. What constitutes “art” will be judged by…what we have to assume are Pinterest employees who love their job. @mikestilesPhoto: stock.xchng, Tim Marmon

    Read the article

  • Comments on Comments

    - by Joe Mayo
    I almost tweeted a reply to Capar Kleijne's question about comments on Twitter, but realized that my opinion exceeded 140 characters. The following is based upon my experience with extremes and approaches that I find useful in code comments. There are a couple extremes that I've seen and reasons why people go the distance in each approach. The most common extreme is no comments in the code at all.  A few bad reasons why this happens is because a developer is in a hurry, sloppy, or is interested in job preservation. The unfortunate result is that the code is difficult to understand and hard to maintain. The drawbacks to no comments in code are a primary reason why teachers drill the need for commenting code into our heads.  This viewpoint assumes the lack of comments are bad because the code is bad, but there is another reason for not commenting that is gaining more popularity. I've heard/and read that code should be self documenting. Following this thought pattern, if code is well written with meaningful names, there should not be a reason for comments.  An addendum to this argument is that comments are often neglected and get out-of-date, but the code is what is kept up-to-date. Presumably, if code contained very good naming, it would be easy to maintain.  This is a noble perspective and I like the practice of meaningful naming of identifiers. However, I think it's also an extreme approach that doesn't cover important cases.  i.e. If an identifier is named badly (subjective differences in opinion) or not changed appropriately during maintenance, then the badly named identifier is no more useful than a stale comment. These were the two no-comment extremes, so let's look at the too many comments extreme. On a regular basis, I'll see cases where the code is over-commented; not nearly as often as the no-comment scenarios, but still prevalent.  These are examples of where every single line in the code is commented.  These comments make the code harder to read because they get in the way of the algorithm.  In most cases, the comments parrot what each line of code does.  If a developer understands the language, then most statements are immediately intuitive.  i.e. what use is it to say that I'm assigning foo to bar when it's clear what the code is doing. I think that over-commenting code is a waste of time that slows down initial development and maintenance.  Understandably, the developer's intentions are admirable because they've had it beaten into their heads that they must comment. However, I think it's an extreme and prefer a more moderate approach. I don't think the extremes do justice to code because each can make maintenance harder.  No comments on bad code is obviously a problem, but the other two extremes are subtle and require qualification to address properly. The problem I see with the code-as-documentation approach is that it doesn't lift the developer out of the algorithm to identify dependencies, intentions, and hacks. Any developer can read code and follow an algorithm, but they still need to know where it fits into the big picture of the application. Because of indirections with language features like interfaces, delegates, and virtual members, code can become complex.  Occasionally, it's useful to point out a nuance or reason why a piece of code is there. i.e. If you've building an app that communicates via HTTP, you'll have certain headers to include for the endpoint, and it could be useful to point out why the code for setting those header values is there and how they affect the application. An argument against this could be that you should extract that code into a separate method with a meaningful name to describe the scenario.  My problem with such an approach would be that your code base becomes even more difficult to navigate and work with because you have all of this extra code just to make the code more meaningful. My opinion is that a simple and well-stated comment stating the reasons and intention for the code is more natural and convenient to the initial developer and maintainer.  I just don't agree with the approach of going out of the way to avoid making a comment.  I'm also concerned that some developers would take this approach as an excuse to not comment their bad code. Another area where I like comments is on documentation comments.  Java has it and so does C# and VB.  It's convenient because we can build automated tools that extract these comments.  These extracted comments are often much better than no documentation at all.  The "go read the code" answer always doesn't fulfill the need for a quick summary of an API. To summarize, I think that the extremes of no comments and too many comments are less than desirable approaches. I prefer documentation comments to explain each class and member (API level) and code comments as necessary to supplement well-written code. Joe

    Read the article

  • Issuing Current Time Increments in StreamInsight (A Practical Example)

    The issuing of a Current Time Increment, Cti, in StreamInsight is very definitely one of the most important concepts to learn if you want your Streams to be responsive. A full discussion of how to issue Ctis is beyond the scope of this article but a very good explanation in addition to Books Online can be found in these three articles by a member of the StreamInsight team at Microsoft, Ciprian Gerea. Time in StreamInsight Series http://blogs.msdn.com/b/streaminsight/archive/2010/07/23/time-in-streaminsight-i.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/07/30/time-in-streaminsight-ii.aspx http://blogs.msdn.com/b/streaminsight/archive/2010/08/03/time-in-streaminsight-iii.aspx A lot of the problems I see with unresponsive or stuck streams on the MSDN Forums are to do with how Ctis are enqueued or in a lot of cases not enqueued. If you enqueue events and never enqueue a Cti then StreamInsight will be perfectly happy. You, on the other hand, will never see data on the output as you have not told StreamInsight to flush the stream. This article deals with a specific implementation problem I had recently whilst working on a StreamInsight project. I look at some possible options and discuss why they would not work before showing the way I solved the problem. The stream of data I was dealing with on this project was very bursty that is to say when events were flowing they came through very quickly and in large numbers (1000 events/sec), but when the stream calmed down it could be a few seconds between each event. When enqueuing events into the StreamInsight engne it is best practice to do so with a StartTime that is given to you by the system producing the event . StreamInsight processes events and it doesn't matter whether those events are being pushed into the engine by a source system or the events are being read from something like a flat file in a directory somewhere. You can apply the same logic and temporal algebra to both situations. Reading from a file is an excellent example of where the time of the event on the source itself is very important. We could be reading that file a long time after it was written. Being able to read the StartTime from the events allows us to define windows that will hold the correct sets of events. I was able to do this with my stream but this is where my problems started. Below is a very simple script to create a SQL Server table and populate it with sample data that will show exactly the problem I had. CREATE TABLE [dbo].[t] ( [c1] [int] PRIMARY KEY, [c2] [datetime] NULL ) INSERT t VALUES (1,'20100810'),(2,'20100810'),(3,'20100810') Column c2 defines the StartTime of the event on the source and as you can see the values in all 3 rows of data is the same. If we read Ciprian’s articles we know that we can define how Ctis get injected into the stream in 3 different places The Stream Definition The Input Factory The Input Adapter I personally have always been a fan of enqueing Ctis through the factory. Below is code typical of what I would use to do this On the class itself I do some inheriting public class SimpleInputFactory : ITypedInputAdapterFactory<SimpleInputConfig>, ITypedDeclareAdvanceTimeProperties<SimpleInputConfig> And then I implement the following function public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.FromTicks(-1)), AdvanceTimePolicy.Adjust); } The configInfo .CtiFrequency property is a value I pass through to define after how many events I want a Cti to be injected and this in turn will flush through the stream of data. I usually pass a value of 1 for this setting. The second parameter determines the CTI timestamp in terms of a delay relative to the events. -1 ticks in the past results in 1 tick in the future, i.e., ahead of the event. The problem with this method though is that if consecutive events have the same StartTime then only one of those events will be enqueued. In this example I use the following to define how I assign the StartTime of my events currEvent.StartTime = (DateTimeOffset)dt.c2; If I go ahead and run my StreamInsight process with this configuration i can see on the output adapter that two events have been removed To see this in a little more depth I can use the StreamInsight Debugger and see what happens internally. What is happening here is that the first event arrives and a Cti is injected with a time of 1 tick after the StartTime of that event (Also the EndTime of the event). The second event arrives and it has a StartTime of before the Cti and even though we specified AdvanceTimePolicy.Adjust on the factory we know that a point event can never be adjusted like this and the event is dropped. The same happens for the third event as well (The second and third events get trumped by the Cti). For a more detailed discussion of why this happens look here http://www.sqlis.com/sqlis/post/AdvanceTimePolicy-and-Point-Event-Streams-In-StreamInsight.aspx We end up with a single event being pushed into the output adapter and our result now makes sense. The next way I tried to solve this problem by changing the value of the second parameter to TimeSpan.Zero Here is how my factory code now looks public AdapterAdvanceTimeSettings DeclareAdvanceTimeProperties<TPayload>(SimpleInputConfig configInfo, EventShape eventShape) { return new AdapterAdvanceTimeSettings( new AdvanceTimeGenerationSettings(configInfo.CtiFrequency, TimeSpan.Zero), AdvanceTimePolicy.Adjust); } What I am doing here is declaring a policy that says inject a Cti together with every event and stamp it with a StartTime that is equal to the start time of the event itself (TimeSpan.Zero). This method has plus points as well as a downside. The upside is that no events will be lost by having the same StartTime as previous events. The Downside is that because the Cti is declared with the StartTime of the event itself then it does not actually flush that particular event because in the StreamInsight algebra, a Cti commits only those events that occurred strictly before them. To flush the events we need a Cti to be enqueued with a greater StartTime than the events themselves. Here is what happened when I ran this configuration As you can see all we got through was the Cti and none of the events. The debugger output shows the stamps on the Cti and the events themselves. Because the Cti issued has the same timestamp (StartTime) as the events then none of the events get flushed. I was nearly there but not quite. Because my stream was bursty it was possible that the next event would not come along for a few seconds and this was far too long for an event to be enqueued and not be flushed to the output adapter. I needed another solution. Two possible solutions crossed my mind although only one of them made sense when I explored it some more. Where multiple events have the same StartTime I could add 1 tick to the first event, two to the second, three to third etc thereby giving them unique StartTime values. Add a timer to manually inject Ctis The problem with the first implementation is that I would be giving the events a new StartTime. This would cause me the following problems If I want to define windows over the stream then some events may not be captured in the right windows and therefore any calculations on those windows I did would be wrong What would happen if we had 10,000 events with the same StartTime? I would enqueue them with StartTime + n ticks. Along comes a genuine event with a StartTime of the very first event + 1 tick. It is now too far in the past as far as my stream is concerned and it would be dropped. Not what I would want to do at all. I decided then to look at the Timer based solution I created a timer on my input adapter that elapsed every 200ms. private Timer tmr; public SimpleInputAdapter(SimpleInputConfig configInfo) { ctx = new SimpleTimeExtractDataContext(configInfo.ConnectionString); this.configInfo = configInfo; tmr = new Timer(200); tmr.Elapsed += new ElapsedEventHandler(t_Elapsed); tmr.Enabled = true; } void t_Elapsed(object sender, ElapsedEventArgs e) { ts = DateTime.Now - dtCtiIssued; if (ts.TotalMilliseconds >= 200 && TimerIssuedCti == false) { EnqueueCtiEvent(System.DateTime.Now.AddTicks(-100)); TimerIssuedCti = true; } }   In the t_Elapsed event handler I find out the difference in time between now and when the last event was processed (dtCtiIssued). I then check to see if that is greater than or equal to 200ms and if the last issuing of a Cti was done by the timer or by a genuine event (TimerIssuedCti). If I didn’t do this check then I would enqueue a Cti every time the timer elapsed which is not something I wanted. If the difference between the two times is greater than or equal to 500ms and the last event enqueued was by a real event then I issue a Cti through the timer to flush the event Queue, otherwise I do nothing. When I enqueue the Ctis into my stream in my ProduceEvents method I also set the values of dtCtiIssued and TimerIssuedCti   currEvent = CreateInsertEvent(); currEvent.StartTime = (DateTimeOffset)dt.c2; TimerIssuedCti = false; dtCtiIssued = currEvent.StartTime; If I go ahead and run this configuration I see the following in my output. As we can see the first Cti gets enqueued as before but then another is enqueued by the timer and because this has a later timestamp it flushes the enqueued events through the engine. Conclusion Hopefully this has shown how the enqueuing of Ctis can have a dramatic effect on the responsiveness of your output in StreamInsight. Understanding the temporal nature of the product is for me one of the most important things you can learn. I have attached my solution for the demos. It is all in one project and testing each variation is a simple matter of commenting and un-commenting the parts in the code we have been dealing with here.

    Read the article

  • Dynamic Grouping and Columns

    - by Tim Dexter
    Some good collaboration between myself and Kan Nishida (Oracle BIP Consulting) over at bipconsulting on a question that came in yesterday to an internal mailing list. Is there a way to allow columns to be place into a template dynamically? This would be similar to the Answers Column selector. A customer has said Crystal can do this and I am trying to see how BI Pub can do the same. Example: Report has Regions as a dimension in a table, they want the user to select a parameter that will insert either Units or Dollars without having to create multiple templates. Now whether Crystal can actually do it or not is another question, can Publisher? Yes we can! Kan took the first stab. His approach, was to allow to swap out columns in a table in the report. Some quick steps: 1. Create a parameter from BIP server UI 2. Declare the parameter in RTF template You can check this post to see how you can declare the parameter from the server. http://bipconsulting.blogspot.com/2010/02/how-to-pass-user-input-values-to-report.html 3. Use the parameter value to condition if a particular column needs to be displayed or not. You can use <?if@column:.....?> syntax for Column level IF condition. The if@column is covered in user documentation. This would allow a developer to create a report with the parameter or multiple parameters to allow the user to pick a column to be included in the report. I took a slightly different tack, with the mention of the column selector in the Answers report I took that to mean that the user wanted to select more of a dimensional column and then have the report recalculate all its totals and subtotals based on that selected column. This is a little bit more involved and involves some smart XSL and XPATH expressions, but still very doable. The user can select a column as a parameter, that is passed to the template rather than the query. The parameter value that is actually passed is the element name that you want to regroup the data by. Inside the template we then reference that parameter value in our for-each-group loop. That's where we need the trixy XSL/XPATH code to get the regrouping to happen. At this juncture, I need to hat tip to Klaus, for his article on dynamic sorting that he wrote back in 2006. I basically took his sorting code and applied it to the for-each loop. You can follow both of Kan's first two steps above i.e. Create a parameter from BIP server UI - this just needs to be based on a 'list' type list of value with name/value pairs e.g. Department/DEPARTMENT_NAME, Job/JOB_TITLE, etc. The user picks the 'friendly' value and the server passes the element name to the template. Declare the parameter in RTF template - been here before lots of times right? <?param@begin:group1;'"DEPARTMENT_NAME"'?> I have used a default value so that I can test the funtionality inside the template builder (notice the single and double quotes.) Next step is to use the template builder to build a re-grouped report layout. It does not matter if its hard coded right now; we will add in the dynamic piece next. Once you have a functioning template that is re-grouping correctly. Open up the for-each-group field and modify it to use the parameter: <?for-each-group:ROW;./*[name(.) = $group1]?> 'group1' is my grouping parameter, declared above. We need the XPATH expression to find the column in the XML structure we want to group that matches the one passed by the parameter. Its essentially looking through the data tree for a match. We can show the actual grouping value in the report output with a similar XPATH expression <?./*[name(.) = $group1]?> In my example, I took things a little further so that I could have a dynamic label for the parameter value. For instance if I am using MANAGER as the parameter I want to show: Manager: Tim Dexter My XML elements are readable e.g. DEPARTMENT_NAME. Its a simple case of replacing the underscore with a space and then 'initcapping' the result: <?xdoxslt:init_cap(translate($group1,'_',' '))?> With this in place, the user can now select a grouping column in the BIP report viewer and the layout will re-group the data and any calculations based on that column. I built a group above report but you could equally build the group left version to truly mimic the Answers column selector. If you are interested you can get an example report, sample data and layout template here. Of course, you can combine Klaus' dynamic sorting, Kan's conditional column approach and this dynamic grouping to build a real kick ass report for users that will keep them happy for hours..

    Read the article

  • To ORM or Not to ORM. That is the question&hellip;

    - by Patrick Liekhus
    UPDATE:  Thanks for the feedback and comments.  I have adjusted my table below with your recommendations.  I had missed a point or two. I wanted to do a series on creating an entire project using the EDMX XAF code generation and the SpecFlow BDD Easy Test tools discussed in my earlier posts, but I thought it would be appropriate to start with a simple comparison and reasoning on why I choose to use these tools. Let’s start by defining the term ORM, or Object-Relational Mapping.  According to Wikipedia it is defined as the following: Object-relational mapping (ORM, O/RM, and O/R mapping) in computer software is a programming technique for converting data between incompatible type systems in object-oriented programming languages. This creates, in effect, a "virtual object database" that can be used from within the programming language. Why should you care?  Basically it allows you to map your business objects in code to their persistence layer behind them. And better yet, why would you want to do this?  Let me outline it in the following points: Development speed.  No more need to map repetitive tasks query results to object members.  Once the map is created the code is rendered for you. Persistence portability.  The ORM knows how to map SQL specific syntax for the persistence engine you choose.  It does not matter if it is SQL Server, Oracle and another database of your choosing. Standard/Boilerplate code is simplified.  The basic CRUD operations are consistent and case use database metadata for basic operations. So how does this help?  Well, let’s compare some of the ORM tools that I have used and/or researched.  I have been interested in ORM for some time now.  My ORM of choice for a long time was NHibernate and I still believe it has a strong case in some business situations.  However, you have to take business considerations into account and the law of diminishing returns.  Because of these two factors, my recent activity and experience has been around DevExpress eXpress Persistence Objects (XPO).  The primary reason for this is because they have the DevExpress eXpress Application Framework (XAF) that sits on top of XPO.  With this added value, the data model can be created (either database first of code first) and the Web and Windows client can be created from these maps.  While out of the box they provide some simple list and detail screens, you can verify easily extend and modify these to your liking.  DevExpress has done a tremendous job of providing enough framework while also staying out of the way when you need to extend it.  This sounds worse than it really is.  What I mean by this is that if you choose to follow DevExpress coding style and recommendations, the hooks and extension points provided allow you to do some pretty heavy lifting while also not worrying about the basics. I have put together a list of the top features that I have used to compare the limited list of ORM’s that I have exposure with.  Again, the biggest selling point in my opinion is that XPO is just a solid as any of the other ORM’s but with the added layer of XAF they become unstoppable.  And then couple that with the EDMX modeling tools and code generation, it becomes a no brainer. Designer Features Entity Framework NHibernate Fluent w/ Nhibernate Telerik OpenAccess DevExpress XPO DevExpress XPO/XAF plus Liekhus Tools Uses XML to map relationships - Yes - - -   Visual class designer interface Yes - - - - Yes Management integrated w/ Visual Studio Yes - - Yes - Yes Supports schema first approach Yes - - Yes - Yes Supports model first approach Yes - - Yes Yes Yes Supports code first approach Yes Yes Yes Yes Yes Yes Attribute driven coding style Yes - Yes - Yes Yes                 I have a very small team and limited resources with a lot of responsibilities.  In order to keep up with our customers, we must rely on tools like these.  We use the EDMX tool so that we can create a visual representation of the applications with our customers.  Second, we rely on the code generation so that we can focus on the business problems at hand and not whether a field is mapped correctly.  This keeps us from requiring as many junior level developers on our team.  I have also worked on multiple teams where they believed in writing their own “framework”.  In my experiences and opinion this is not the route to take unless you have a team dedicated to supporting just the framework.  Each time that I have worked on custom frameworks, the framework eventually becomes old, out dated and full of “performance” enhancements specific to one or two requirements.  With an ORM, there are a lot smarter people than me working on the bigger issue of persistence and performance.  Again, my recommendation would be to use an available framework and get to working on your business domain problems.  If your coding is not making money for you, why are you working on it?  Do you really need to be writing query to object member code again and again? Thanks

    Read the article

  • On Life and TechEd&hellip;

    - by MOSSLover
    I haven’t been writing here I know.  I am very sorry, but I am just too busy trying to make my personal life just as good as my SharePoint life.  So I was at TechEd again helping with the hands on labs, but I had a very long couple of weeks.  I will have a long week again.  I started out going to my friend, Randy Walker’s, wedding and I ended up at my grandmother’s condo in Fort Lauderdale.  It was a very trying week.  I had to drive 5 1/2 hours to the wedding from St. Louis and back.  So Randy is an awesome person.  He is a great guy and he was the first person ever to nominate me for MVP.  I knew it probably wasn’t going anywhere, but it was the thought that count.  I met Randy in 2008 at Tulsa Techfest.  We had fun jamming out to Rockband.  I knew he was good people back then.  He has let me vent and I have let him vent over countless personal problems.  He has always been a great friend.  So it was a no brainer when I decided to go to his wedding no matter how much driving or stress or lack of sleep it was worth it.  I am incredibly happy for him to finally find a diamond amongst a lot of coal.  To take part in his celebration was so awesome.  I thank him again for letting me participate in this ceremony. Now after Randy’s wedding I drove 5 1/2 hours landed in St. Louis, fed a cat an asthma pill hidden in wet cat food, and slept for 4 hours.  I immediately saw my best friend who dropped me off at the airport and proceeded to TechEd.  I slept 1 hour on each flight, then ended up working a 3 hour shift at TechEd.  The rest of the week was a haze of connecting with people and sleeping very little.  I got to see my friend Tasha and her husband Casey plus a billion other people.  It was a great week and then I got a call from my grandmother.  It turns out her husband was admitted to the hospital. My grandparents on my dad's side have been divorced since the 60s, which means I never got to see them together.  I always felt like they never cliqued.  When I was a kid we would always spend half our time in Chicago at grandma’s and half our time at grandpa’s houses.  We would hang out with my grandpa’s wife Bobbi and my grandma’s husband Leo.  My cousin’s always called Leo by Pappa and my brother and I would use Leo.  My cousins lived in Chicago up until my cousin Gavi was born then they moved to Philadelphia.  I remember complaining to my dad that we never visited anywhere cool just Chicago and Kansas City.  I also remember Leo teaching me and my brother, Sam, how to climb a tree and play tennis on the back of the apartment wall.  My grandfather’s was kind of stuffy and boring, but we always enjoyed my grandmother’s.  She had games and Disney Movies and toys.  Leo always made it a ton of fun to visit.  I’m not sure a lot of people knew this fact, but when I was 16 years old I saw my grandfather on my mother’s side slowly die of congestive heart failure in a nursing home.  When I was 18 I saw my grandmother on my mother’s side slowly die of an infection over a 30 day period.  I hate hospitals and I hate nursing homes, but sometimes you have to suck in your gut and be strong.  I tried to do that this weekend and I hope I did an ok job.  I really hope things get better, but if they don’t I really appreciate everything he has given me in life.  I am a terrible tennis player and I haven’t climbed a tree in ages, but they both encouraged me when encouragement from my parents was lacking.  It was Father’s Day today and I have to at least pay tribute to Leo Morris, because he has been a good person to me all my life.  Technorati Tags: TechEd,Grandparents,Father's Day

    Read the article

  • Oracle Enterprise Data Quality: Ever Integration-ready

    - by Mala Narasimharajan
    It is closing in on a year now since Oracle’s acquisition of Datanomic, and the addition of Oracle Enterprise Data Quality (EDQ) to the Oracle software family. The big move has caused some big shifts in emphasis and some very encouraging excitement from the field.  To give an illustration, combined with a shameless promotion of how EDQ can help to give quick insights into your data, I did a quick Phrase Profile of the subject field of emails to the Global EDQ mailing list since it was set up last September. The results revealed a very clear theme:   Integration, Integration, Integration! As well as the important Siebel and Oracle Data Integrator (ODI) integrations, we have been asked about integration with a huge variety of Oracle applications, including EBS, Peoplesoft, CRM on Demand, Fusion, DRM, Endeca, RightNow, and more - and we have not stood still! While it would not have been possible to develop specific pre-integrations with all of the above within a year, we have developed a package of feature-rich out-of-the-box web services and batch processes that can be plugged into any application or middleware technology with ease. And with Siebel, they work out of the box. Oracle Enterprise Data Quality version 9.0.4 includes the Customer Data Services (CDS) pack – a ready set of standard processes with standard interfaces, to provide integrated: Address verification and cleansing  Individual matching Organization matching The services can are suitable for either Batch or Real-Time processing, and are enabled for international data, with simple configuration options driving the set of locale-specific dictionaries that are used. For example, large dictionaries are provided to support international name transcription and variant matching, including highly specialized handling for Arabic, Japanese, Chinese and Korean data. In total across all locales, CDS includes well over a million dictionary entries.   Excerpt from EDQ’s CDS Individual Name Standardization Dictionary CDS has been developed to replace the OEM of Informatica Identity Resolution (IIR) for attached Data Quality on the Oracle price list, but does this in a way that creates a ‘best of both worlds’ situation for customers, who can harness not only the out-of-the-box functionality of pre-packaged matching and standardization services, but also the flexibility of OEDQ if they want to customize the interfaces or the process logic, without having to learn more than one product. From a competitive point of view, we believe this stands us in good stead against our key competitors, including Informatica, who have separate ‘Identity Resolution’ and general DQ products, and IBM, who provide limited out-of-the-box capabilities (with a steep learning curve) in both their QualityStage data quality and Initiate matching products. Here is a brief guide to the main services provided in the pack: Address Verification and Standardization EDQ’s CDS Address Cleaning Process The Address Verification and Standardization service uses EDQ Address Verification (an OEM of Loqate software) to verify and clean addresses in either real-time or batch. The Address Verification processor is wrapped in an EDQ process – this adds significant capabilities over calling the underlying Address Verification API directly, specifically: Country-specific thresholds to determine when to accept the verification result (and therefore to change the input address) based on the confidence level of the API Optimization of address verification by pre-standardizing data where required Formatting of output addresses into the input address fields normally used by applications Adding descriptions of the address verification and geocoding return codes The process can then be used to provide real-time and batch address cleansing in any application; such as a simple web page calling address cleaning and geocoding as part of a check on individual data.     Duplicate Prevention Unlike Informatica Identity Resolution (IIR), EDQ uses stateless services for duplicate prevention to avoid issues caused by complex replication and synchronization of large volume customer data. When a record is added or updated in an application, the EDQ Cluster Key Generation service is called, and returns a number of key values. These are used to select other records (‘candidates’) that may match in the application data (which has been pre-seeded with keys using the same service). The ‘driving record’ (the new or updated record) is then presented along with all selected candidates to the EDQ Matching Service, which decides which of the candidates are a good match with the driving record, and scores them according to the strength of match. In this model, complex multi-locale EDQ techniques can be used to generate the keys and ensure that the right balance between performance and matching effectiveness is maintained, while ensuring that the application retains control of data integrity and transactional commits. The process is explained below: EDQ Duplicate Prevention Architecture Note that where the integration is with a hub, there may be an additional call to the Cluster Key Generation service if the master record has changed due to merges with other records (and therefore needs to have new key values generated before commit). Batch Matching In order to allow customers to use different match rules in batch to real-time, separate matching templates are provided for batch matching. For example, some customers want to minimize intervention in key user flows (such as adding new customers) in front end applications, but to conduct a more exhaustive match on a regular basis in the back office. The batch matching jobs are also used when migrating data between systems, and in this case normally a more precise (and automated) type of matching is required, in order to minimize the review work performed by Data Stewards.  In batch matching, data is captured into EDQ using its standard interfaces, and records are standardized, clustered and matched in an EDQ job before matches are written out. As with all EDQ jobs, batch matching may be called from Oracle Data Integrator (ODI) if required. When working with Siebel CRM (or master data in Siebel UCM), Siebel’s Data Quality Manager is used to instigate batch jobs, and a shared staging database is used to write records for matching and to consume match results. The CDS batch matching processes automatically adjust to Siebel’s ‘Full Match’ (match all records against each other) and ‘Incremental Match’ (match a subset of records against all of their selected candidates) modes. The Future The Customer Data Services Pack is an important part of the Oracle strategy for EDQ, offering a clear path to making Data Quality Assurance an integral part of enterprise applications, and providing a strong value proposition for adopting EDQ. We are planning various additions and improvements, including: An out-of-the-box Data Quality Dashboard Even more comprehensive international data handling Address search (suggesting multiple results) Integrated address matching The EDQ Customer Data Services Pack is part of the Enterprise Data Quality Media Pack, available for download at http://www.oracle.com/technetwork/middleware/oedq/downloads/index.html.

    Read the article

  • Test-Drive ASP.NET MVC Review

    - by Ben Griswold
    A few years back I started dallying with test-driven development, but I never fully committed to the practice. This wasn’t because I didn’t believe in the value of TDD; it was more a matter of not completely understanding how to incorporate “test first” into my everyday development. Back in my web forms days, I could point fingers at the framework for my ignorance and laziness. After all, web forms weren’t exactly designed for testability so who could blame me for not embracing TDD in those conditions, right? But when I switched to ASP.NET MVC and quickly found myself fresh out of excuses and it became instantly clear that it was time to get my head around red-green-refactor once and for all or I would regretfully miss out on one of the biggest selling points the new framework had to offer. I have previously written about how I learned ASP.NET MVC. It was primarily hands on learning but I did read a couple of ASP.NET MVC books along the way. The books I read dedicated a chapter or two to TDD and they certainly addressed the benefits of TDD and how MVC was designed with testability in mind, but TDD was merely an afterthought compared to, well, teaching one how to code the model, view and controller. This approach made some sense, and I learned a bunch about MVC from those books, but when it came to TDD the books were just a teaser and an opportunity missed.  But then I got lucky – Jonathan McCracken contacted me and asked if I’d review his book, Test-Drive ASP.NET MVC, and it was just what I needed to get over the TDD hump. As the title suggests, Test-Drive ASP.NET MVC takes a different approach to learning MVC as it focuses on testing right from the very start. McCracken wastes no time and swiftly familiarizes us with the framework by building out a trivial Quote-O-Matic application and then dedicates the better part of his book to testing first – first by explaining TDD and then coding a full-featured Getting Organized application inspired by David Allen’s popular book, Getting Things Done. If you are a learn-by-example kind of coder (like me), you will instantly appreciate and enjoy McCracken’s style – its fast-moving, pragmatic and focused on only the most relevant information required to get you going with ASP.NET MVC and TDD. The book continues with the test-first theme but McCracken moves away from the sample application and incorporates other practical skills like persisting models with NHibernate, leveraging Inversion of Control with the IControllerFactory and building a RESTful web service. What I most appreciated about this section was McCracken’s use of and praise for open source libraries like Rhino Mocks, SQLite and StructureMap (to name just a few) and productivity tools like ReSharper, Web Platform Installer and ASP.NET SQL Server Setup Wizard.  McCracken’s emphasis on real world, pragmatic development was clearly demonstrated in every tool choice, straight-forward code block and developer tip. Whether one is already familiar with the tools/tips or not, McCracken’s thought process is easily understood and appreciated. The final section of the book walks the reader through security and deployment – everything from error handling and logging with ELMAH, to ASP.NET Health Monitoring, to using MSBuild with automated builds, to the deployment  of ASP.NET MVC to various web environments. These chapters, like those prior, offer enough information and explanation to simply help you get the job done.  Do I believe Test-Drive ASP.NET MVC will turn you into an expert MVC developer overnight?  Well, no.  I don’t think any book can make that claim.  If that were possible, I think book list prices would skyrocket!  That said, Test-Drive ASP.NET MVC provides a solid foundation and a unique (and dare I say necessary) approach to learning ASP.NET MVC.  Along the way McCracken shares loads of very practical software development tips and references numerous tools and libraries. The bottom line is it’s a great ASP.NET MVC primer – if you’re new to ASP.NET MVC it’s just what you need to get started.  Do I believe Test-Drive ASP.NET MVC will give you everything you need to start employing TDD in your everyday development?  Well, I used to think that learning TDD required a lot of practice and, if you’re lucky enough, the guidance of a mentor or coach.  I used to think that one couldn’t learn TDD from a book alone. Well, I’m still no pro, but I’m testing first now and Jonathan McCracken and his book, Test-Drive ASP.NET MVC, played a big part in making this happen.  If you are an MVC developer and a TDD newb, Test-Drive ASP.NET MVC is just the book for you.

    Read the article

  • Oracle Coherence & Oracle Service Bus: REST API Integration

    - by Nino Guarnacci
    This post aims to highlight one of the features found in Oracle Coherence which allows it to be easily added and integrated inside a wider variety of projects.  The features in question are the REST API exposed by the Coherence nodes, with which you can interact in the wider mode in memory data grid.Oracle Coherence and Oracle Service Bus are natively integrated through a feature found in the Oracle Service Bus, which allows you to use the coherence grid cache during the configuration phase of a business service. This feature allows you to use an intermediate layer of cache to retrieve the answers from previous invocations of the same service, without necessarily having to invoke the real business service again. Directly from the web console of Oracle Service Bus, you can decide the policies of eviction of the objects / answers and define the discriminating parameters that identify their uniqueness.The coherence REST APIs, however, allow you to integrate both products for other necessities enabling realization of new architectures design.  Consider coherence’s node as a simple service which interoperates through the stardard services and in particular REST (with JSON and XML). Thinking of coherence as a company’s shared service, able to have an implementation of a centralized “map and reduce” which you can access  by a huge variety of protocols (transport and envelopes).An amazing step forward for those who still imagine connectors and code. This type of integration does not require writing custom code or complex implementation to be self-supported. The added value is made unique by the incredible value of both products independently, and still more out of their simple and robust integration.As already mentioned this scenario discovers a hidden new door behind the columns of these two products. The door leads to new ideas and perspectives for enterprise architectures that increasingly wink to next-generation applications: simple and dynamic, perhaps towards the mobile and web 2.0.Below, a small and simple demo useful to demonstrate how easily is to integrate these two products using the Coherence REST API. This demo is also intended to imagine new enterprise architectures using this approach.The idea is to create a centralized system of alerting, fed easily from any company’s application, regardless of the technology with which they were built . Then use a representation standard protocol: RSS, using a service exposed by the service bus; So you can browse and search only the alerts that you are interested on, by category, author, title, date, etc etc.. The steps needed to implement this system are very simple and very few. Here they are listed below and described to be easily replicated within your environment. I would remind you that the demo is only meant to demonstrate how easily is to integrate Oracle Coherence and the Oracle Service Bus, and stimulate your imagination to new technological approaches.1) Install the two products: In this demo used (if necessary, consult the installation guides of 2 products)  - Oracle Service Bus ver. 11.1.1.5.0 http://www.oracle.com/technetwork/middleware/service-bus/downloads/index.html - Oracle Coherence ver. 3.7.1 http://www.oracle.com/technetwork/middleware/coherence/downloads/index.html 2) Because you choose to create a centralized alerting system, we need to define a structure type containing some alerting attributes useful to preserve and organize the information of the various alerts sent by the different applications. Here, then it was built a java class named Alert containing the canonical properties of an alarm information:- Title- Description- System- Time- Severity 3) Therefore, we need to create two configuration files for the coherence node, in order to save the Alert objects within the grid, through the rest/http protocol (more than the native API for Java, C + +, C,. Net). Here are the two minimal configuration files for Coherence:coherence-rest-config.xml resty-server-config.xml This minimum configuration allows me to use a distributed cache named "alerts" that can  also be accessed via http - rest on the host "localhost" over port "8080", objects are of type “oracle.cohsb.Alert”. 4) Below  a simple Java class that represents the type of alert messages: 5) At this point we just need to startup our coherence node, able to listen on http protocol to manage the “alerts” cache, which will receive incoming XML or JSON objects of type Alert. Remember to include in the classpath of the coherence node, the Alert java class and the following coherence libraries and configuration files:  At this point, just run the coherence class node “com.tangosol.net.DefaultCacheServer”advising you to set the following parameters:-Dtangosol.coherence.log.level=9 -Dtangosol.coherence.log=stdout -Dtangosol.coherence.cacheconfig=[PATH_TO_THE_FILE]\resty-server-config.xml 6) Let's create a procedure to test our configuration of Coherence and in order to insert some custom alerts in our cache. The technology with which you want to achieve this functionality is fully not considerable: Javascript, Python, Ruby, Scala, C + +, Java.... Because the protocol to communicate with Coherence is simply HTTP / JSON or XML. For this little demo i choose Java: A method to send/put the alert to the cache: A method to query and view the content of the cache: Finally the main method that execute our methods:  No special library added in the classpath for our class (json struct static defined), when it will be executed, it asks some information such as title, description,... in order to compose and send an alert to the cache and then it will perform an inquiry, to the same cache. At this point, a good exercise at this point, may be to create the same procedure using other technologies, such as a simple html page containing some JavaScript code, and then using Python, Ruby, and so on.7) Now we are ready to start configuring the Oracle Service Bus in order to integrate the two products. First integrate the internal alerting system of Oracle Service Bus with our centralized alerting system based on coherence node. This ensures that by monitoring, or directly from within our Proxy Message Flow, we can throw alerts and save them directly into the Coherence node. To do this I choose to use the jms technology, natively present inside the Oracle Weblogic / Service Bus. Access to the Oracle WebLogic Administration console and create and configure a new JMS connection factory and a new jms destination (queue). Now we should create a new resource of type “alert destination” within our Oracle Service Bus project. The new “alert destination” resource should be configured using the newly created connection factory jms and jms destination. Finally, in order to withdraw the message alert enqueued in our JMS destination and send it to our coherence node, we just need to create a new business service and proxy service within our Oracle Service Bus project.Our business service is responsible for sending a message to our REST service Coherence using as a method action: PUT Finally our proxy service have to collect all messages enqueued on the destination, execute an xquery transformation on those messages  in order to translate them into valid XML / alert objects useful to be sent to our coherence service, through the newly created business service. The message flow pipeline containing the xquery transformation: Incredibly,  we just did a basic first integration between the native alerting system of Oracle Service Bus and our centralized alerting system by simply configuring our coherence node without developing anything.It's time to test it out. To do this I create a proxy service able to generate an alert using our "alert destination", whenever the proxy is invoked. After some invocation to our proxy that generates fake alerts, we could open an Internet browser and type the URL  http://localhost: 8080/alerts/  so we could see what has been inserted within the coherence node. 8) We are ready for the final step.  We would create a new message flow, that can be used to search and display the results in standard mode. To do this I choosen the standard representation of RSS, to display a formatted result on a huge variety of devices such as readers for the iPhone and Android. The inquiry may be defined already at the time of the request able to return only feed / items related to our needs. To do this we need to create a new business service, a new proxy service, and finally a new XQuery Transformation to take care of translating the collection of alerts that will be return from our coherence node in a nicely formatted RSS standard document.So we start right from this resource (xquery), which has the task of transforming a collection of alerts / xml returned from the node coherence in a type well-formatted feed RSS 2.0 our new business service that will search the alerts on our coherence node using the Rest API. And finally, our last resource, the proxy service that will be exposed as an RSS / feeds to various mobile devices and traditional web readers, in which we will intercept any search query, and transform the result returned by the business service in an RSS feed 2.0. The message flow with the transformation phase (Alert TO Feed Items): Finally some little tricks to follow during the routing to the business service, - check for any queries present in the url to require a subset of alerts  - the http header "Accept" to help get an answer XML instead of JSON: In our little demo we also static added some coherence parameters to the request:sort=time:desc;start=0;count=100I would like to get from Coherence that the results will be sorted by date, and starting from 1 up to a maximum of 100.Done!!Just incredible, our centralized alerting system is ready. Inheriting all the qualities and capabilities of the two products involved Oracle Coherence & Oracle Service Bus: - RASP (Reliability, Availability, Scalability, Performance)Now try to use your mobile device, or a normal Internet browser by accessing the RSS just published: Some urls you may test: Search for the last 100 alerts : http://localhost:7001/alarmsSearch for alerts that do not have time set to null (time is not null):http://localhost:7001/alarms?q=time+is+not+nullSearch for alerts that the system property is “Web Browser” (system = ‘Web Browser’):http://localhost:7001/alarms?q=system+%3D+%27Web+Browser%27Search for alerts that the system property is “Web Browser” and the severity property is “Fatal” and the title property contain the word “Javascript”  (system = ‘Web Broser’ and severity = ‘Fatal’ and title like ‘%Javascript%’)http://localhost:8080/alerts?q=system+%3D+%27Web+Browser%27+AND+severity+%3D+%27Fatal%27+AND+title+LIKE+%27%25Javascript%25%27 To compose more complex queries about your need I would suggest you to read the chapter in the coherence documentation inherent the Cohl language (Coherence Query Language) http://download.oracle.com/docs/cd/E24290_01/coh.371/e22837/api_cq.htm . Some useful links: - Oracle Coherence REST API Documentation http://download.oracle.com/docs/cd/E24290_01/coh.371/e22839/rest_intro.htm - Oracle Service Bus Documentation http://download.oracle.com/docs/cd/E21764_01/soa.htm#osb - REST explanation from Wikipedia http://en.wikipedia.org/wiki/Representational_state_transfer At this URL could be downloaded the whole materials of this demo http://blogs.oracle.com/slc/resource/cosb/coh-sb-demo.zip Author: Nino Guarnacci.

    Read the article

  • &ldquo;My life at Oracle&rdquo;

    - by cristian.condurache(at)oracle.com
    Hello everybody! My name is Eva and I currently work in Oracle Italy as Sales Programs Manager for the Technology Sales organization. Since 2009, I also proudly represent the Oracle Education Foundation within my country as the Ambassador for Italy. My career path in this amazing company began 5 years ago as a fresh graduate: after various years studying abroad, in Germany and Ireland mainly, I was looking for a valuable and concrete opportunity which could fulfill my energetic spirit. I wanted to develop myself inside a stimulating and “fast” business environment.. and here came Oracle and I really couldn’t ask for anything better!  THE PARTNER EXPERIENCE The first department I had the chance to work into was the Alliances and Channels organization, where I had the opportunity to join a brilliant team of great and visionary guys. I began having the responsibility to analyze and rationalize the portfolio of Oracle business partners and to identify potential cross-area solutions, which had to be highlighted both on the local market and internationally: this ended up with the implementation of the “Partner Community” model, a business environment of selected Oracle partners, specialized on the different technology focus areas. This new concept was then recognized as an EMEA Best Practice and replicated internationally. Having the opportunity to strengthen day after day strategic relationships with several business partners and study the market positioning of their technology solutions, I was given the role to develop the “Oracle Partner Network Innovation Award” in Italy: the EMEA competition encouraging and rewarding proven and successful technology innovations, creating high value for our common customers and generating new business potential. Several Italian partner solutions won different prizes and I decided that it was worth collecting all those valuable projects, winners and short-listed, inside two specific books in order also to provide them an international market visibility: OPN Innovation Award Booklet 2007 and OPN Innovation Award Booklet 2008 Inside the Alliances and Channels department I really had the opportunity to do    amazing things, like for example working side-by-side with one of the most exceptional teams in Oracle I have ever worked with: the EMEA Recruitment Team. Together, in fact, we conceived a brand new business initiative for our partners, called “Oracle Campus Joint Program”. This program was awarded as an EMEA Best Practice and acknowledged by both Italian public institutions and press media. Italy   is currently running its 5th edition.   Briefly, the “Oracle Campus Joint Program” aims at facing the growing issue of lack of  technology competences and skills on the market. By identifying a specific technology area and developing an intensive 4-6 week Oracle University training course and by collaborating with important academic institutes, international “gurus” and professionals, our business partners are able to benefit from a pool of brilliant top talented young consultants and offer them a significant career opportunity. BUSINESS BUT NOT ONLY: THE NO-PROFIT EXPERIENCE OF ORACLE Currently my mission in Oracle is to continue driving the implementation of strategic business development and sales programs for the entire Oracle Technology stack, involving both partners and the end-customers. But as a completely distinguished role from the day-today business, I’m also honored to represent in Italy the charity global organization founded by Oracle - the Oracle Education Foundation - and drive its corporate citizenship and marketing programs. Oracle Education Foundation is an independent charitable organization funded by Oracle and is dedicated to helping students develop 21st century skills through project learning and the use of technology. It provides “ThinkQuest” as a free program to primary and secondary (K12) schools. Just some significant numbers: today 548,000 students/teachers in 47 countries use ThinkQuest and the Oracle Education Foundation partners with 40+ no-profit or government organizations globally. ABOUT MYSELF AND MY INTERESTS About myself…I’m very enthusiastic and positive, trying always to transform difficult issues in challenging opportunities. My day usually begins very early in the morning with running, swimming or when I need to collect some “zen” energies with a yoga session or better with a long walk with my dog. I definitely love animals and generally speaking I’m very keen on environmental issues and try, as much as I can, to carry out a healthy and “planet respectful” lifestyle. My thirst for knowledge pushed me some time ago to begin a new personal challenge: I decided to enroll, dedicating a good part of my free time, for a second university degree: I chose “Neuroeconomics”, an innovative academic path which combines psychology, economics, and neuroscience and studies how people make decisions and the role of the brain when people evaluate these decisions, categorizing risks and rewards and generally interacting with each other. I’ve been very glad to talk about my experience in this article, as working for Oracle is something very stimulating. This company ensures you the opportunity to face new challenges, work with highly talented people and be professionally highlighted also globally. Motivation, good results and innovation is always pursued, recognized and fully supported. Thanks and wish you all an amazing career! If you have any question please contact [email protected]. For our job opportunities, please look at http://campus.oracle.com.   Technorati Tags: EMEA,Oracle Partners,Oracle Campus,Oracle Education,experience,EMEA Recruitment Team

    Read the article

  • XNA Notes 004

    - by George Clingerman
    The XNA community has been crazy busy again. It always make me fee like such a slacker collecting all of these notes as I see the tremendous output from people all over the world and it’s incredible and humbling. There are some amazingly skilled people working with XNA. On another not, I’m going to take a minute to get on my soapbox and say, if you are developing ANYTHING and are not using some sort of source/revision control, START IMMEDIATELY. This applies to teams of one. Projects for fun. And “I back up my hard drive” or “I use dropbox!” does NOT count as using source control. You’ll be doing yourself a HUGE favor if you find one, learn to use it and integrate it into your everyday workflow. I personally use Subversion. It’s hosted offsite at xp.dev.com and I use TortoiseSVN as my front end to interface with the repository. It’s simple and easy to use and has saved me from myself so many time. Honestly, get setup with some type of source control immediately. If you don’t understand how, grab another developer that does and have them walk you through setup and the basics of using it. Ok, I’m done. On to the notes… The XNA Team Only 14 days left to Submit XNA GS 3.1 Games! http://blogs.msdn.com/b/xna/archive/2011/01/24/14-days-left-to-submit-xna-gs-3-1-games-on-app-hub.aspx Shawn Hargreaves shares some great information on Exception Handling best practices on the XNA forums http://forums.create.msdn.com/forums/p/73333/448556.aspx#448556 http://blogs.msdn.com/b/ericlippert/archive/2008/09/10/vexing-exceptions.aspx XNA MVPs @CatalinZima gives us a peek at Chicken’s Can’t Fly http://www.amusedsloth.com/games/chickens-cant-fly/ Screen-space deformations in XNA for WP7 from Catalin Zima http://twitter.com/CatalinZima/statuses/30313083767357440 http://www.amusedsloth.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ XNA Developers Going to GDC? Don’t miss the XNA panel hosted by a plethora of well known XNA community names! http://forums.create.msdn.com/forums/p/73576/448842.aspx#448842 MasterBlud does an interview with @Xalterax http://twitter.com/MasterBlud/statuses/28510774812999680 http://www.xboxhornet.com/wordpress/?p=7102 Luke Schneider of Radiangames posts about The Radiangames Style http://radiangames.com/?p=532 Holmade Games had a “vote for the new playable character” poll going on for Hurdle Turtle this past week http://holmadegames.blogspot.com/2011/01/new-level-pack-vote-for-your-favorite.html IGF v0.1.0.0 release post mortem http://indiefreaks.com/2011/01/24/v0-1-0-0-release-post-mortem/ James an Super Dunner post Good Morning Gato #46 and a look at the Vampire Smile box art http://www.ska-studios.com/2011/01/21/good-morning-gato-46/ http://www.ska-studios.com/2011/01/20/vampire-smiles-digital-box-art/ Alfredo Di Napoli creates Cow Pong using XNA and F#! http://alfredodinapoli.wordpress.com/2011/01/25/cow-pong-a-simple-xna-game-in-f/ Xbox LIVE Indie Games Signed In Podcast posts Episode #61 http://www.signedinpodcast.com/?p=559 Gamergeddon posts the January 23rd edition of XBLIG Round Up http://www.gamergeddon.com/2011/01/23/xbox-indie-games-round-up-january-23rd/ Indie Asylum posts Antipole Review http://www.indieasylum.com/reviews/38-xblig/112-antipole.html 1UPOrPosion Reviews OSR Unhinged http://www.1uporpoison.com/xblig/osr-unhinged/ DarkstarMatryx review Warbirds at Work http://www.darkstarmatryx.com/?p=185 Review of Aban Hawkins and the 1000 Spikes http://www.armlessoctopus.com/2011/01/24/xbox-indie-review-aban-hawkins-the-1000-spikes/ XboxHornet reviews Corrupted http://www.xboxhornet.com/wordpress/?p=7123 XBLIG 2010: The Best And The Worst http://www.gamasutra.com/blogs/JamieMann/20110121/6840/ Xbox LIVE Arcade Sales Analysis - an interesting read for XBLIG developers wondering how they’re doing compared to arcade.. http://www.gamerbytes.com/2011/01/xbla_sales_analysis_dec_2010.php Best of Indies for January 25th http://www.thisisfakediy.co.uk/articles/games/best-of-the-indies-25th-january-2011 Decimation X3 appears as an arcade machine in the wild! http://twitter.com/mdoucette/statuses/29605562484260864 XNA Game Development Guiseppe De Francesco (@PinoEire) announced Torque X 4.0 CEV is now in RC phase! http://www.garagegames.com/community/blogs/view/20779 DrMistry of mstargames shares his struggle (and mistakes) with learning to use the Content Pipeline http://www.mstargames.co.uk/mistryblogmain/35-genblog/181-pontent-cipeline-more-like-it.html New Tutorial posted XNA 2D Basic Collision Detection with Rotation from Ioannis Panagopoulos http://www.progware.org/Blog/post/XNA-2D-Basic-Collision-Detection-with-Rotation.aspx Sgt. Conker roars to life! Doing a much better (and prettier) job of collecting XNA news from around the interwebs. http://www.sgtconker.com/ http://www.sgtconker.com/2011/01/dedication-for-captain-boki/ http://www.sgtconker.com/2011/01/screen-space-deformations-in-xna-for-windows-phone-7/ http://www.sgtconker.com/2011/01/xna-4-0-light-pre-pass-2/ http://www.sgtconker.com/2011/01/indiefreaks-game-framework-0-1-0-0-released/ Offering a little free publicity for XBLIGs http://forums.create.msdn.com/forums/p/73465/448321.aspx#448321 Ben Kane writes about building loot tables from Excel using the Content Pipeline http://benkane.wordpress.com/2011/01/23/building-loot-tables-from-excel-using-the-content-pipeline/ Good tips on attracting a game artist AND an offer to create your cover art for FREE http://forums.create.msdn.com/forums/t/72998.aspx If you’re an XBLIG developer keeping your eye on places to release on the PC, might want to be watching the IndieCity blog. Seems like these guys are well on their way to constructing something worth watching. http://www.indiecity.com/blog/ DVMGames spotted a new crowd-funding site for Indies http://twitter.com/DVMGames/statuses/29947274767372289 http://www.8bitfunding.com/ Transmute continues to make progress and there’s a nice dev blog to follow along here http://forgottenstarstudios.com/blog/

    Read the article

  • Option Trading: Getting the most out of the event session options

    - by extended_events
    You can control different aspects of how an event session behaves by setting the event session options as part of the CREATE EVENT SESSION DDL. The default settings for the event session options are designed to handle most of the common event collection situations so I generally recommend that you just use the defaults. Like everything in the real world though, there are going to be a handful of “special cases” that require something different. This post focuses on identifying the special cases and the correct use of the options to accommodate those cases. There is a reason it’s called Default The default session options specify a total event buffer size of 4 MB with a 30 second latency. Translating this into human terms; this means that our default behavior is that the system will start processing events from the event buffer when we reach about 1.3 MB of events or after 30 seconds, which ever comes first. Aside: What’s up with the 1.3 MB, I thought you said the buffer was 4 MB?The Extended Events engine takes the total buffer size specified by MAX_MEMORY (4MB by default) and divides it into 3 equally sized buffers. This is done so that a session can be publishing events to one buffer while other buffers are being processed. There are always at least three buffers; how to get more than three is covered later. Using this configuration, the Extended Events engine can “keep up” with most event sessions on standard workloads. Why is this? The fact is that most events are small, really small; on the order of a couple hundred bytes. Even when you start considering events that carry dynamically sized data (eg. binary, text, etc.) or adding actions that collect additional data, the total size of the event is still likely to be pretty small. This means that each buffer can likely hold thousands of events before it has to be processed. When the event buffers are finally processed there is an economy of scale achieved since most targets support bulk processing of the events so they are processed at the buffer level rather than the individual event level. When all this is working together it’s more likely that a full buffer will be processed and put back into the ready queue before the remaining buffers (remember, there are at least three) are full. I know what you’re going to say: “My server is exceptional! My workload is so massive it defies categorization!” OK, maybe you weren’t going to say that exactly, but you were probably thinking it. The point is that there are situations that won’t be covered by the Default, but that’s a good place to start and this post assumes you’ve started there so that you have something to look at in order to determine if you do have a special case that needs different settings. So let’s get to the special cases… What event just fired?! How about now?! Now?! If you believe the commercial adage from Heinz Ketchup (Heinz Slow Good Ketchup ad on You Tube), some things are worth the wait. This is not a belief held by most DBAs, particularly DBAs who are looking for an answer to a troubleshooting question fast. If you’re one of these anxious DBAs, or maybe just a Program Manager doing a demo, then 30 seconds might be longer than you’re comfortable waiting. If you find yourself in this situation then consider changing the MAX_DISPATCH_LATENCY option for your event session. This option will force the event buffers to be processed based on your time schedule. This option only makes sense for the asynchronous targets since those are the ones where we allow events to build up in the event buffer – if you’re using one of the synchronous targets this option isn’t relevant. Avoid forgotten events by increasing your memory Have you ever had one of those days where you keep forgetting things? That can happen in Extended Events too; we call it dropped events. In order to optimizes for server performance and help ensure that the Extended Events doesn’t block the server if to drop events that can’t be published to a buffer because the buffer is full. You can determine if events are being dropped from a session by querying the dm_xe_sessions DMV and looking at the dropped_event_count field. Aside: Should you care if you’re dropping events?Maybe not – think about why you’re collecting data in the first place and whether you’re really going to miss a few dropped events. For example, if you’re collecting query duration stats over thousands of executions of a query it won’t make a huge difference to miss a couple executions. Use your best judgment. If you find that your session is dropping events it means that the event buffer is not large enough to handle the volume of events that are being published. There are two ways to address this problem. First, you could collect fewer events – examine you session to see if you are over collecting. Do you need all the actions you’ve specified? Could you apply a predicate to be more specific about when you fire the event? Assuming the session is defined correctly, the next option is to change the MAX_MEMORY option to a larger number. Picking the right event buffer size might take some trial and error, but a good place to start is with the number of dropped events compared to the number you’ve collected. Aside: There are three different behaviors for dropping events that you specify using the EVENT_RETENTION_MODE option. The default is to allow single event loss and you should stick with this setting since it is the best choice for keeping the impact on server performance low.You’ll be tempted to use the setting to not lose any events (NO_EVENT_LOSS) – resist this urge since it can result in blocking on the server. If you’re worried that you’re losing events you should be increasing your event buffer memory as described in this section. Some events are too big to fail A less common reason for dropping an event is when an event is so large that it can’t fit into the event buffer. Even though most events are going to be small, you might find a condition that occasionally generates a very large event. You can determine if your session is dropping large events by looking at the dm_xe_sessions DMV once again, this time check the largest_event_dropped_size. If this value is larger than the size of your event buffer [remember, the size of your event buffer, by default, is max_memory / 3] then you need a large event buffer. To specify a large event buffer you set the MAX_EVENT_SIZE option to a value large enough to fit the largest event dropped based on data from the DMV. When you set this option the Extended Events engine will create two buffers of this size to accommodate these large events. As an added bonus (no extra charge) the large event buffer will also be used to store normal events in the cases where the normal event buffers are all full and waiting to be processed. (Note: This is just a side-effect, not the intended use. If you’re dropping many normal events then you should increase your normal event buffer size.) Partitioning: moving your events to a sub-division Earlier I alluded to the fact that you can configure your event session to use more than the standard three event buffers – this is called partitioning and is controlled by the MEMORY_PARTITION_MODE option. The result of setting this option is fairly easy to explain, but knowing when to use it is a bit more art than science. First the science… You can configure partitioning in three ways: None, Per NUMA Node & Per CPU. This specifies the location where sets of event buffers are created with fairly obvious implication. There are rules we follow for sub-dividing the total memory (specified by MAX_MEMORY) between all the event buffers that are specific to the mode used: None: 3 buffers (fixed)Node: 3 * number_of_nodesCPU: 2.5 * number_of_cpus Here are some examples of what this means for different Node/CPU counts: Configuration None Node CPU 2 CPUs, 1 Node 3 buffers 3 buffers 5 buffers 6 CPUs, 2 Node 3 buffers 6 buffers 15 buffers 40 CPUs, 5 Nodes 3 buffers 15 buffers 100 buffers   Aside: Buffer size on multi-processor computersAs the number of Nodes or CPUs increases, the size of the event buffer gets smaller because the total memory is sub-divided into more pieces. The defaults will hold up to this for a while since each buffer set is holding events only from the Node or CPU that it is associated with, but at some point the buffers will get too small and you’ll either see events being dropped or you’ll get an error when you create your session because you’re below the minimum buffer size. Increase the MAX_MEMORY setting to an appropriate number for the configuration. The most likely reason to start partitioning is going to be related to performance. If you notice that running an event session is impacting the performance of your server beyond a reasonably expected level [Yes, there is a reasonably expected level of work required to collect events.] then partitioning might be an answer. Before you partition you might want to check a few other things: Is your event retention set to NO_EVENT_LOSS and causing blocking? (I told you not to do this.) Consider changing your event loss mode or increasing memory. Are you over collecting and causing more work than necessary? Consider adding predicates to events or removing unnecessary events and actions from your session. Are you writing the file target to the same slow disk that you use for TempDB and your other high activity databases? <kidding> <not really> It’s always worth considering the end to end picture – if you’re writing events to a file you can be impacted by I/O, network; all the usual stuff. Assuming you’ve ruled out the obvious (and not so obvious) issues, there are performance conditions that will be addressed by partitioning. For example, it’s possible to have a successful event session (eg. no dropped events) but still see a performance impact because you have many CPUs all attempting to write to the same free buffer and having to wait in line to finish their work. This is a case where partitioning would relieve the contention between the different CPUs and likely reduce the performance impact cause by the event session. There is no DMV you can check to find these conditions – sorry – that’s where the art comes in. This is  largely a matter of experimentation. On the bright side you probably won’t need to to worry about this level of detail all that often. The performance impact of Extended Events is significantly lower than what you may be used to with SQL Trace. You will likely only care about the impact if you are trying to set up a long running event session that will be part of your everyday workload – sessions used for short term troubleshooting will likely fall into the “reasonably expected impact” category. Hey buddy – I think you forgot something OK, there are two options I didn’t cover: STARTUP_STATE & TRACK_CAUSALITY. If you want your event sessions to start automatically when the server starts, set the STARTUP_STATE option to ON. (Now there is only one option I didn’t cover.) I’m going to leave causality for another post since it’s not really related to session behavior, it’s more about event analysis. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

< Previous Page | 338 339 340 341 342 343 344 345 346 347 348 349  | Next Page >