Search Results

Search found 14598 results on 584 pages for 'address'.

Page 344/584 | < Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >

• Mysterious login attempts to windows server

  - by Jim Balo

  I have a Windows 2008R2 server that is reporting failed login attempts from a number of workstations on our network. Some event log details: Event ID 4625, Status: 0xc000006d, Sub Status: 0xc0000064 Security ID: NULL SID, Account Name: joedoe, Account Domain: Acme Workstation Name: WINXP1, Source Network Address: 192.168.1.23, Source Port: 1904 Logon Process: NtLmSsp, Authentication Package: NTLM, Logon Type: 3 (network) I believe this is coming from some netbios service or similar (maybe the file explorer), keeping an inventory of its network neighborhood and also trying to authenticate. Is there a way to turn this off without having to turn off file sharing all together? In other words, clients authenticating against file servers that they use is of course no problem, but I want to eliminate clients trying to authenticate to servers that they are not using and have no business with. The above example is only one of thousands of log alerts for similar failed network authentications. What can I do to clean this up / handle this? Thanks.

  Read the article

• Internet connection sharing: Ubuntu 9.10 Server on Windows 7 and VMWare

  - by avesse

  I'm trying to get Internet Connection Sharing (ICS) working between my Windows 7 RTM host and a Ubuntu 9.10 Server running on VMWare Workstation 6.5, but I have not been able to get it right. Here's what I have done: Configured VMWare to use Host Only networking (I tried NAT as well). Enabled ICS on my host's network connection, allowing VMnet1. After enabling it, Windows informed me that its VMnet1 IP has changed to 192.168.137.1. So in VMWare's Virtual Network Editor I configured VMnet1: Subnet 192.168.137.0 Mask 255.255.255.0 I did the same for DHCP. For NAT i set 192.168.137.1 as Gateway. I cannot ping any sites or get access through apt-get/aptitude install/update, although domains do get resolved to IPs. I have also tried using a static IP in Ubuntu. I don't know if it makes a difference, but my external IP is locked to my host's MAC address.

  Read the article

• PHP Mail() to Gmail = Spam

  - by grantw

  Recently Gmail has started marking emails sent directly from my server (using php mail()) as spam and I'm having problems trying to find the issue. If I send an exact copy of the same email from my email client it goes to the Gmail inbox. The emails are plain text, around 7 lines long and contain a URL link in plain text. As the emails sent from my client are getting through fine I'm thinking that the content isn't the issue. It would be greatly appreciated if someone could take a look at the the following headers and give me some advice why the email from the server is being marked as spam. Email from Server: Delivered-To: [email protected] Received: by 10.49.98.228 with SMTP id el4csp101784qeb; Thu, 15 Nov 2012 14:58:52 -0800 (PST) Received: by 10.60.27.166 with SMTP id u6mr2296595oeg.86.1353020331940; Thu, 15 Nov 2012 14:58:51 -0800 (PST) Return-Path: [email protected] Received: from dom.domainbrokerage.co.uk (dom.domainbrokerage.co.uk. [174.120.246.138]) by mx.google.com with ESMTPS id df4si17005013obc.50.2012.11.15.14.58.51 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 15 Nov 2012 14:58:51 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 174.120.246.138 as permitted sender) client-ip=174.120.246.138; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 174.120.246.138 as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=domainbrokerage.co.uk; s=default; h=Date:Message-Id:Content-Type:Reply-to:From:Subject:To; bh=2RJ9jsEaGcdcgJ1HMJgQG8QNvWevySWXIFRDqdY7EAM=; b=mGebBVOkyUhv94ONL3EabXeTgVznsT1VAwPdVvpOGDdjBtN1FabnuFi8sWbf5KEg5BUJ/h8fQ+9/2nrj+jbtoVLvKXI6L53HOXPjl7atCX9e41GkrOTAPw5ZFp+1lDbZ; Received: from grantw by dom.domainbrokerage.co.uk with local (Exim 4.80) (envelope-from [email protected]) id 1TZ8OZ-0008qC-Gy for [email protected]; Thu, 15 Nov 2012 22:58:51 +0000 To: [email protected] Subject: Offer Accepted X-PHP-Script: www.domainbrokerage.co.uk/admin.php for 95.172.231.27 From: My Name [email protected] Reply-to: [email protected] Content-Type: text/plain; charset=Windows-1251 Message-Id: [email protected] Date: Thu, 15 Nov 2012 22:58:51 +0000 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - dom.domainbrokerage.co.uk X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [500 500] / [47 12] X-AntiAbuse: Sender Address Domain - domainbrokerage.co.uk X-Get-Message-Sender-Via: dom.domainbrokerage.co.uk: authenticated_id: grantw/from_h Email from client: Delivered-To: [email protected] Received: by 10.49.98.228 with SMTP id el4csp101495qeb; Thu, 15 Nov 2012 14:54:49 -0800 (PST) Received: by 10.182.197.8 with SMTP id iq8mr2351185obc.66.1353020089244; Thu, 15 Nov 2012 14:54:49 -0800 (PST) Return-Path: [email protected] Received: from dom.domainbrokerage.co.uk (dom.domainbrokerage.co.uk. [174.120.246.138]) by mx.google.com with ESMTPS id ab5si17000486obc.44.2012.11.15.14.54.48 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 15 Nov 2012 14:54:49 -0800 (PST) Received-SPF: pass (google.com: domain of [email protected] designates 174.120.246.138 as permitted sender) client-ip=174.120.246.138; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 174.120.246.138 as permitted sender) [email protected]; dkim=pass [email protected] DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=domainbrokerage.co.uk; s=default; h=Content-Transfer-Encoding:Content-Type:Subject:To:MIME-Version:From:Date:Message-ID; bh=bKNjm+yTFZQ7HUjO3lKPp9HosUBfFxv9+oqV+NuIkdU=; b=j0T2XNBuENSFG85QWeRdJ2MUgW2BvGROBNL3zvjwOLoFeyHRU3B4M+lt6m1X+OLHfJJqcoR0+GS9p/TWn4jylKCF13xozAOc6ewZ3/4Xj/YUDXuHkzmCMiNxVcGETD7l; Received: from w-27.cust-7941.ip.static.uno.uk.net ([95.172.231.27]:1450 helo=[127.0.0.1]) by dom.domainbrokerage.co.uk with esmtpa (Exim 4.80) (envelope-from [email protected]) id 1TZ8Ke-0001XH-7p for [email protected]; Thu, 15 Nov 2012 22:54:48 +0000 Message-ID: [email protected] Date: Thu, 15 Nov 2012 22:54:50 +0000 From: My Name [email protected] User-Agent: Postbox 3.0.6 (Windows/20121031) MIME-Version: 1.0 To: [email protected] Subject: Offer Accepted Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - dom.domainbrokerage.co.uk X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [47 12] / [47 12] X-AntiAbuse: Sender Address Domain - domainbrokerage.co.uk X-Get-Message-Sender-Via: dom.domainbrokerage.co.uk: authenticated_id: [email protected]

  Read the article

• Apache w/out internet connection

  - by robert knobulous

  I have a Vista laptop that I have been running Apache / MySql / Php / PhpMyAdmin on for quite some time without fail. I just use it to test bits of code here and there etc. No problems, until recently when I needed to test something and I happened to be in a place that I could not get an internet connection. Why am I unable to access localhost from the same machine without an internet connection? I am type http://localhost..etc into the browser's address bar and I get the message that I am unable to access without an internet connection. I checked my windows/system32/etc/hosts file and the first two lines are 127.0.0.1 localhost ::1 localhost What am I missing here?

  Read the article

• CMOTECH D-50 modem installation in Ubuntu 12.04

  - by Ricardo

  I have recently upgraded from 10.04 to 12.04. I had installed a 3G D-50 modem from CMOTECH. The program for Debian is provided by a Swedish company (ice.net). Usually after some mambo jambo of installung the libg++ libraries requested you can install it and runned in Ubuntu 8.04, 9.04, 10.04 and as far as I know in 11.04. When I upgraded and I click on the icon of ice.net it worked. However, I noticed that the usb D-50 modem was never mounted as usb and it didn't show up in the Lauchnpad or workspace (as when you plug a usb memory stick or another HD). I moved the icon from place in the launchpad and since when I click on the ice.net icon the same message appears: "please plug in your modem". The modem works (I've tested in Windows after this) and it blinks blue (sign that it works and picks up signal). If I type lsusb then I see that Ubuntu sees it on BUS address 006: Bus 006 Device 003: ID 16d8:6803 CMOTECH Co., Ltd. CNU-680 CDMA EV-DO modem I've tried wvdial without success. How can I get the D-50 usb modem mounted as in the previous versions of Ubuntu ?. Any help will be much appreciated. bests. Ricardo

  Read the article

• How to route HyperV VMs traffic through host VPN

  - by Random

  I'm using Windows 8.1 Pro with HyperV. I have several VMs for development, all of them connected with host via Internal adapter using network addresses: 192.168.10.0/24 Where: 192.168.10.1 is my host's Hyper-V internal NIC address. When I'm not in my office I use 3G usb dongle an dialup VPN connection. I would like to route traffic from all existing and future VMs through the VPN. In best scenario traffic would be routed only partially to the local company network addresses 10.1.1.0/24 I don't want to use sharing because I'm switching between WiFi, USB 3G dongle and VPN. Moving to other virtualization is also not an option for me.

  Read the article

• Fix Google Reader Lag by Blocking Google Plus Button

  - by Jason Fitzpatrick

  Chrome: Many Google Reader fans have noticed, since the upgrades last month, that the service is unbearably slow. Speed things up by blocking the Google Plus button. Ever since the upgrade from the old Google Reader interface to the new integrated-with-Google-Plus interface, many Google Reader users were reporting a painfully long lag between reading entries in Reader. Previously hitting a keyboard shortcut or arrow button to move you through the new stories was instant with no noticeable lag. After the upgrade a lag of 3-5 seconds per individual story became common (we experienced this annoying lag around the How-To Geek office immediately after the upgrade). One of the theories was that the addition of the Google Plus button to every article was causing memory issues. Geeks Are Sexy tested the theory by blocking this address: plusone.google.com/u/0/_/+1/fastbutton using AdBlock. While people were reporting great success with that move (and you may find it works great too) we didn’t have any luck. What did work for us was installing Chromeblock and, while visiting reader.google.com, clicking on the ChromeBlock toolbar button and blocking Google +1. After that the 3-5 second lag vanished and browsing articles was as snappy as it had been. Hit up the link below to grab a copy of Chromeblock. Amazon’s New Kindle Fire Tablet: the How-To Geek Review HTG Explains: How Hackers Take Over Web Sites with SQL Injection / DDoS Use Your Android Phone to Comparison Shop: 4 Scanner Apps Reviewed

  Read the article

• ArchBeat Link-o-Rama for 11/16/2011

  - by Bob Rhubart

  Size, Failure, and Optimization | Roger Sessions The slide deck from Roger Sessions' keynote address at the 2nd IT Architect Regional Conference in Bogota, Colombia. Webcast: Oracle Business Intelligence Mobile Event Date: Tuesday, November 29, 2011 Time: 9 a.m. PT/12 noon ET Featuring Manan Goel (Director BI Product Marketing, Oracle) and Shailesh Shedge (Director BI & Analytics Practice, Ascentt). Live Webinar: Solutions for MySQL High Availability (November 29) Tune into this webcast to learn how MySQL’s High Availability solution can help you minimize downtime and ensure business continuity. Domain-Driven Design: Useful Models for Complex Problems | @ericevans0 Domain-Driven Design: Useful Models for Complex Problems | Eric Evans Eric Evans' slide deck from the recent IASA event in Spain. Oracle Hardware goes social Introducing the Oracle Hardware Social Media Hub -- The new Facebook meeting place for the global hardware community. The hub now features a pioneering Q&A app called Oracle Ask the Expert, where you can ask questions and engage with Oracle experts. Review: WebLogic Server 11g Administration Handbook by S. Alapati Dr. Frank Munz, author of "Middleware and Cloud Computing, reviews the new WebLogic book by Sam Alapati and offers a quick overview of a couple of other new titles. SOA All the Time; Architects in AZ; Clearing Info Integration hurdles This week on the Architect Home Page on OTN.

  Read the article

• VPN to Buffalo WHR-HP-G300N produces a Connection Error 807

  - by Darius

  My friend has modem/router from Clear and I have sent him Buffalo router to put it between his Clear device and the Network. I walked him thru establishing VPN in DD-WRT but when I try to VPN I get a VPN Connection Error 807. I am out of ideas how to solve this. Any suggestion? Clear Modem WAN: xx.xx.xx.xx Clearn Modem NAT's to: 192.168.15.XXX Clear Modem DHCP: 192.168.15.2 - 192.168.15.2 (range is limited to that of ONE ip address) Clear Modem DMZ: 192.168.15.2 the LAN of the clear modem is 192.168.15.XXX The DD-WRT IP: 192.168.4.1 Port FWD: 1723 to 192.168.4.1 PPTP server listens on 192.168.4.1 Where is the problem with this setup?

  Read the article

• How can I disable ipv6 on Ubuntu Server 8.04?

  - by Boden

  I'm trying to run Dell OMSA on Ubuntu 8.04. However, it's binding to ipv6 and not to an ipv4 address. I can't seem to figure out how to change this behavior. So, since I don't need ipv6 support, I'd like to just disable it and see if that clears things up. I've tried blacklisting ipv6 in /etc/modprobe.d/blacklist (blacklist ipv6), and turning it off in /etc/modprobe.d/aliases (alias net-pf-10 off). I'm seeing both solutions recommended in forums and blogs, but neither works.

  Read the article

• Use Web Browser (Google Chrome or Firefox) to Open Web Sites from a List in File

  - by MMA

  I have a (text) file containing a list of web site addresses. I know that I can open the file in an editor and then copy-paste the addresses to the browser address bar. That means, if I have ten addresses in that file, I will need ten copy-paste operations, which must be tedious. But is there a way to ask the browser (preferably Google Chrome or Firefox) to open all of them in one go in different tabs? I am using Ubuntu, if that is related in any way to the solution you provide.

  Read the article

• supervise apache with daemontools

  - by perlwle

  I am trying to setup daemontools for two apaches in one server. one apache 2.2 listening on port 80 proxy request to a second apache 1.3 listening on port 8888. ./run script as following: #!/bin/sh # apache 1.3 exec /apache_1_3/apache/bin/httpd -F #!/bin/sh # apache 2.2 exec /apache_2_2/apache/bin/httpd -D FOREGROUND daemontools monitors both apache fine. however, If I stop apache2.2 (using svc -t or apachectl), the apache 1.3 will see the following error in error_log [crit] (98)Address already in use: make_sock: could not bind to port 8888 I had to manually apachectl stop the apache1.3 to stop the error message clobber the log file. There is no such problem before using daemontools. any idea why this is happening?

  Read the article

• At what year in history was computers first used to store porn? [closed]

  - by Emil H

  Of course this sounds like a joke question, but it's meant seriously. I remember being told by an old system administrator back in the early nineties about people asking about good FTPs for porn, and that they would as a joke always tell them to connect to 127.0.0.1. They would come back saying that there was a lot of porn at that address, but that oddly enough it seemed like they already had it all. Point being, it seems like it's been around for quite a while. Anyway. Considering that a considerable portion of the internet is devoted to porn these days, it would be interesting to know if someone has any kind of idea as to when and where the phenomena first arose? There must be some mention of this in old hacker folk lore? (Changed to CW to emphasize that this isn't about rep, but about genuine curiousity. :)

  Read the article

• Bridge virtual machines out WLAN interface

  - by Thomas

  It seems that my wlan card (intel 5100 AGN) firmware doesn't allow "spoofing" MAC addresses. This has the side effect of destroying the capability to bridge out my virtual machines on that interface. Apparently this is a common thing on wlan cards. I can see the incoming traffic just fine in my virtual machines, but their DHCP queries don't get bridged out of the WLAN card. It works perfectly well when using the wired ethernet port. Is there a workaround for this? MAC-NAT or something? I don't want to route my virtual machines out to the Internet because I don't want my host OS to even have an IP address. I'm using Linux and KVM for virtualization.

  Read the article

• DSL PPPoE connection not working?

  - by Mussnoon

  I use a wired PPPoE connection to connect to the Internet. What I need to do on Windows to connect to it is put in static IP address, gateway, subnet mask and DNS servers for my LAN card. Next I have to create a dialer for a PPPoE connection, put in my user name, the service name and the password, and "dial" this connection. And it works fine. On Ubuntu 10.04, however, I have tried setting things up in a similar fashion - put in all static addresses for the "automatic" wired connection, then put in user name, service name, password for a "DSL" connection. It worked for a while, then stopped. I have tried putting in all the details within the DSL configuration dialog, same thing happened - it worked for a while, then stopped. I have tried deleting the ethernet connection and only keeping the DSL one with all the numbers put in place, same thing happened - it worked for a while, then stopped. Each of the times, when it connected, it connected randomly, after trying a few times, and either stopped working within a few minutes, or after I had rebooted. I have deleted and remade the connection dozens of times - even with different names, but nothing seems to be working. I have also tried pppoeconf from the terminal, didn't work. I have checked /var/log/kern.log, but nothing changes in the file when I try to connect. I have also checked /sbin/route, but gedit can't even open it (says it can't figure the character encoding...). The "connection established" notification pops up from the top right corner, the same way as when the computer is actually connected to a network. Can anyone figure what's wrong and how it can be solved?

  Read the article

• Active X Control issue on Terminal Server 2003

  - by Saif Khan

  I have a security camera system which can be viewed remotely via a web browser. It works excellent only with IE 6 and up and requires an ActiveX control "ERViewer.ocx". Some users require to view the cameras via Windows Terminal Server, but when they try to open the link to the DVR they get the prompt ti install the ActiveX and then the browser crashes when they try to install it. I logged in as admin and got the same issue. I called the tech support of the DVR but they have no idea, in other words, the usual useless tech support. Here is what I get in the error log Faulting application iexplore.exe, version 7.0.6000.16735, faulting module ERViewer.ocx, version 1.6.0.8, fault address 0x000064d7. I am sure it could be some kinda permission getting an ocx to run in IE. What else can I tweak?

  Read the article

• GWB | 30 in 60 Update &ndash; Enrique is almost there!

  - by Staff of Geeks

  We are very close to having our first blogger to reach 30 posts, Enrique Lima.  Stuart Brierley is over the hump with 16 posts and Dave Campbell and Eric Nelson are definitely in the running.  If you don’t know what I am talking about, we are running a contest for our bloggers.  Anyone who blogs on Geekswithblogs who creates 30 posts from May 15th to July 13th will receive a custom Geekswithblogs.net t-shirt with their URL on the back.  This could be their Geekswithblogs.net address or their custom domain.  It is definitely not too late to get started and with TechEd or WWDC right around the corner, there is definitely a lot to talk about. Current Standings: Enrique Lima (28 posts) - http://geekswithblogs.net/enriquelima StuartBrierley (16 posts) - http://geekswithblogs.net/StuartBrierley Dave Campbell (12 posts) - http://geekswithblogs.net/WynApseTechnicalMusings Eric Nelson (10 posts) - http://geekswithblogs.net/iupdateable Christopher House (10 posts) - http://geekswithblogs.net/13DaysaWeek mbcrump (7 posts) - http://geekswithblogs.net/mbcrump Chris Williams (6 posts) - http://geekswithblogs.net/cwilliams Michael Stephenson (5 posts) - http://geekswithblogs.net/michaelstephenson Steve Michelotti (5 posts) - http://geekswithblogs.net/michelotti Liam McLennan (5 posts) - http://geekswithblogs.net/liammclennan Follow Us On Twitter: @StaffOfGeeks Technorati Tags: Geekswithblogs,30 in 60,Standings

  Read the article

• IIS7 Windows Server 2008 FTP -> Response: 530 User cannot log in

  - by RSolberg

  I just launched my first IIS FTP site following many of the tutorials from IIS.NET... I'm using IIS Users and Permissions rather than anonymous and/or basic. This is what I'm seeing while trying to establish the connection... Status: Resolving address of ftp.mydomain.com Status: Connecting to ###.###.##.###:21... Status: Connection established, waiting for welcome message... Response: 220 Microsoft FTP Service Command: USER MyFTPUser Response: 331 Password required for MyFTPUser. Command: PASS ******************** Response: 530 User cannot log in. Error: Critical error Error: Could not connect to server

  Read the article

• Debuild fails to make package for bluelog-1.04

  - by Dean Howell

  When trying to build a package for bluelog, Debuild give several errors. In the past, I've used checkinstall to quickly build crude packages. I am now trying to do it the right way and upload to a PPA. Bluelog can be found here: http://www.digifail.com/software/bluelog.shtml Here is the output from debuild; dpkg-buildpackage -rfakeroot -D -us -uc dpkg-buildpackage: export CFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export CPPFLAGS from dpkg-buildflags (origin: vendor): -D_FORTIFY_SOURCE=2 dpkg-buildpackage: export CXXFLAGS from dpkg-buildflags (origin: vendor): -g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Wformat-security dpkg-buildpackage: export FFLAGS from dpkg-buildflags (origin: vendor): -g -O2 dpkg-buildpackage: export LDFLAGS from dpkg-buildflags (origin: vendor): -Wl,-Bsymbolic-functions -Wl,-z,relro dpkg-buildpackage: source package bluelog dpkg-buildpackage: source version 1.0.4-0ubuntu1 dpkg-buildpackage: source changed by Dean Howell <dean@unknown> dpkg-source --before-build bluelog dpkg-buildpackage: host architecture amd64 fakeroot debian/rules clean dh clean dh_testdir dh_auto_clean make[1]: Entering directory `/home/dean/Launchpad Builds/bluelog/bluelog' rm -rf bluelog www/cgi-bin/* *.o *.txt *.log *.gz *.cgi make[1]: Leaving directory `/home/dean/Launchpad Builds/bluelog/bluelog' dh_clean dpkg-source -b bluelog dpkg-source: warning: Version number suggests Ubuntu changes, but Maintainer: does not have Ubuntu address dpkg-source: warning: Version number suggests Ubuntu changes, but there is no XSBC-Original-Maintainer field dpkg-source: info: using source format `3.0 (quilt)' dpkg-source: info: building bluelog using existing ./bluelog_1.0.4.orig.tar.gz dpkg-source: error: cannot represent change to bluelog/Builds/bluelog/bluelog/debian/bluelog/usr/bin/bluelog: binary file contents changed dpkg-source: error: add Builds/bluelog/bluelog/debian/bluelog/usr/bin/bluelog in debian/source/include-binaries if you want to store the modified binary in the debian tarball dpkg-source: error: unrepresentable changes to source dpkg-buildpackage: error: dpkg-source -b bluelog gave error exit status 2

  Read the article

• Running 64 bit Ubuntu distribution from 32 bit Ubuntu

  - by csg

  Related to this question How do I run qemu with 64bit processor on a 64bit machine?, I'm trying to run latest ubuntu 11.10 64bit distribution under Ubuntu 11.04 32 bit using qemu on a core2duo (64 bit cpu) machine, using following qemu parameters with no success. Error under qemu: "This kernel required an x86-64 CPU, but only detected an i686 CPU. Unable to boot - please use a kernel appropiate for your CPU" Isn't qemu suppose to emulate a 64 bit machine? I think I'm missing something, but I can't figure it out. qemu -cpu (kvm64|core2duo|qemu64) -boot d -cdrom ubuntu-11.10-desktop-amd64.iso qemu-system-x86_64 -boot d -cdrom ubuntu-11.10-desktop-amd64.iso Here is my uname -m i686 Here is my /proc/cpuinfo processor : 1 vendor_id : GenuineIntel cpu family : 6 model : 23 model name : Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping : 6 cpu MHz : 800.000 cache size : 3072 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 10 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx lm constant_tsc arch_perfmon pebs bts aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 lahf_lm dts tpr_shadow vnmi flexpriority bogomips : 4522.45 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management:

  Read the article

• Integrating different branches from external sources into a single Mercurial repository

  - by dukeofgaming

  I'm currently working in a company using Perforce and am making way for distributed version control with Mercurial. I've had success importing Perforce history using the perfarce (quite a suitable name, I laugh every time I see/say it) however, this only works with a single branch at a time. Here's how my P4 integration setup works: In perforce, create a "client", which is kind of a description of what you will be constantly updating/checking-out. This can only address one branch at a time (trunk or other). Once you do this, run hg clone p4://<server>/<client_name> Go to .hg/hgrc and put the perforce path line: perforce = p4://<server>/<client_name> Work normally with the code under mercurial, do hg pull perforce to sync up, hg push to export a changelist What I'd like to be able to do is have a perforce path per branch and have everything work in the same repository. Now, pushing is not a problem, however, if I pull the history from another branch it would end up at the default branch. I'd like to be able to do something like hg pull perforce-R5 and have it land in mercurial's R5 branch. Even if I have no merging history, it would be sweet enough to be able to preserve it. There are also other plugins for CVCSs that let you integrate mercurial, but AFAIK the subversion one has the same problem. I don't think there is a straight-through way of doing this, but as long as I could automate the process with some hooks and scripts in a single Mercurial machine, that would be good enough.

  Read the article

• Domain connection shows as "unauthenticated"

  - by gareth89

  I have seen various different questions for this problem floating around but either the circumstances arent the same or the solution doesnt work so thought i would post it to see if anybody has any suggestions. Various domain PCs and laptops appear to randomly give the connection name of "lewis.local 2(Unauthenticated)" - lewis.local being our domain - and provides an exclamation mark where the network type logo is normally shown. This also appears to happen every time connecting via vpn. Our setup is: 2 servers both running windows server 2003 R2 (x32) main server has AD, DNS and DHCP installed IPv4 on approx 30 client machines (some wired, some wireless) If anybody has any thoughts on solutions i would appreciate it. I have tried removing all but AD server roles, resetting all of the systems and nothing. It doesnt prevent anything from working just like a domain connection most of the time however it is getting fustrating! Also dont know if it could have anything to do with it but the DHCP server seems to have quite a long lead time on issuing the IP address to the client.

  Read the article

• IIS displaying page differently when localhost is used in URL vs. hostname

  - by maik

  I'm having (yet another) strange problem with IIS. When viewing an ASPX page I've designed on my local machine by browsing to http://localhost/page.aspx the page looks as expected (and looks the same in IE, Firefox and Chrome. If I change localhost to my_hostname the page is rendered with a disabled vertical scroll bar. The behavior was first noticed when I published my site to our live server and saw the same discrepancy. After beating my head against the wall I tried what I described above and was able to duplicate my "problem". So with that, I turn to you guys. This wouldn't really be an issue (save for the cross-browser inconsistency) except that this screws up an "absolute"ly positioned <div> moving it partway off the screen instead of being centered like it should be (and is when viewed any other way except in IE when the address is anything but localhost).

  Read the article

• ISA Server Route Add Question

  - by Kip

  Hi All, I have a situation where I have and ISA 2006 server (on Win2k3) that has an internal and an externaly facing NIC's. All works fine but I need to add a couple of routes for the following reason: Our monitoring software is on a different network. Our Terminal server is on a different network. Currently, access to the internet, through this proxy server, from the terminal server fails. Also, monitoring of the ISA server via a remote monitor or the installed agent talking to the remote monitor (BMC) also fails. The default enterprise rule on ISA blocks the traffic as I beleive it doesn't trust / know about those networks. Here is my routing table: I need to add a couple of address, but this one being the main one: 192.168.245.137 / mask 255.255.255.192 / gateway 192.168.245.129 But I can't get it to work. Routing is not my strong point but at the moment have no one else available to help. Can you offer any assistance? Please ask if you need more info

  Read the article

• BIND - zone not loaded du to errors

  - by Johan Barelds

  After upgrading from Ubuntu 8.04 to 10.04 my DNS isn't working properly anymore. I keep getting this error when I run named-checkzone example.com /var/cache/bind/example.com.zone.db zone example.com/IN: NS 'mx002a.example.com' has no address records (A or AAAA) zone example.com/IN: not loaded due to errors. in /var/cached/bind/example.com.db $TTL 3D @ IN SOA mx002a.example.com. chantra.example.com. ( 200608081 ; serial, todays date + todays serial # 8H ; refresh, seconds 2H ; retry, seconds 4W ; expire, seconds 1D ) ; minimum, seconds ; ; mx002a.example.com IN A 192.168.85.19 example.com. IN NS mx002a.example.com. mx001 60 IN A 192.168.85.17 mx001 60 IN A 192.168.85.18

  Read the article

< Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >