Search Results

Search found 9417 results on 377 pages for 'tablet pc'.

Page 344/377 | < Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >

• Some Power Supply Cable Questions?

  - by jasondavis

  I am building a new PC and I haven't done this in a few years. It will have all the latest tech stuff. I got my PSU in the mail and I am looking over the cables (it has a lot) I thought it was a mudular PSU so I could only use the cables I need but instead it is a hybrid (some wires attached and some can be added/removed instead of all of then being removable). 1) So I am curious, I believe all my hard drives and optical drives are powered off of a sata power cable so does that mean I probably do not need any of the 4 pin molex cables? Or are these used for other things? 2) I know the 24-pin cable goes to my motherboard. 3) I have some 6-pin cables that are labeled pci-e which is new to me. I read these are for some grapghic cards and stuff. I have 2 grapghic cards but they do not require a seperate pci-e power wire be hooked to them. So are these pci-e wires just to power pci-express cards? Or for other things as well? 4) I have a 4pin ATX 12v wire, what is this for? 5) 8 pin EPS, what is this for?

  Read the article

• How do I disable DirectDraw and Direct3D acceleration on Windows 8? [closed]

  - by Favourite Chigozie Onwuemene

  Some old games that i would really like to play run slowly on some graphic drivers when direct3d acceleration is enabled. I have tried many suggestions but none seems to work. The only thing i have not tried is disabling direct3d acceleration. Is it possible to disable DirectDraw and Direct3D acceleration on my Windows 8 pc? There are certain bad versions of GeForce drivers that cause this problem. This is a problem in the drivers themselves and is unfortunately completely outside our control. The recommended way to fix this problem is to update your graphics card drivers (go to NVIDIA's web site for this). Alternatively, there is a workaround that alleviates or solves the slowdown problem altogether. Try this: Right-click on your desktop and select "Properties". Go to the "Settings" tab and click on "Advanced...". Click on the "Troubleshooting" tab and move the slider to the left until it says that all DirectDraw and Direct3D accelerations have been disabled (around the middle of the range). Finally, click on "OK". Note that this workaround might cause other games on your computer to slow down, so you may have to switch back and forth between settings, but it's certainly worth a try if you can't obtain an updated graphics driver. -source: interactionstudios

  Read the article

• Raspberry Pi how to format HDD

  - by Speed

  Hi I am very new to Raspberry Pi environment, so looking for a bit of help to format a usb hard disk drive. I ran lsblk and got sda 8:0 0 37.3G 0 disk sda1 8:1 0 37.3G 0 part looking on web, if tried the following "sudo mkfs.ext4 /dev/sda1 -L USB40gb" it did something but when I tried to mount the drive again, it still showed the files that were there before and I can not create new file/folder "Error creating directory: Permission denied" I am writing this from my windows 8.1 pc so can not cut and paste from the pi. trying to format its output is a bit hard. Oh, there is Nothing written after the word "part" above. There use to be /media/USB40gb so I have done something because this has disappeared. I am using PCManFM 0.9.10 It does not have a format option, which would make life a lot easier, but then its not windows. I think I am running the basic linux os for the pi. It boots to a graphic environment, but I do not know how to advise what it is. I think its OpenBox 2.0.4 Thanks in advance Speed PS: I reran the format string above but this time I changed the label to read USB37gb. I did this to confirm that I was in fact formatting the right drive. Low and behold, it actually formatted the drive, wiping everything from it. Great ... testing it by creating a new folder on the drive and get error msg Permission Denied! So I have fixed the formatting issue by trial and error but still can't use the drive... Suggestions anyone?

  Read the article

• Internet keeps connecting and disconnecting

  - by OmerPT

  I have a PC running 32bit Windows 7 Professional. My wireless internet card is Edimax EW-7128G, it is inside my computer case and it is connected to an antenna. My problem is: I have a wireless connection to my router, the signal is fine and it's not slow or anything, but it just keeps disconnecting every 30 seconds or so, then connects back, then it disconnects, then connects back and so on. This is new - it only started about a week ago, everything worked just fine until then. I know it's not a problem with the router because: Other computers can connect to it easily and they work just fine, no disconnections (My phone too). I know it's not a problem with the computer or the wireless card itself because: I have Ubuntu installed side-by-side with my Windows, and when I switch to Ubuntu the internet works great. This caused me to think it's probably a problem with the wireless card drivers installed on windows (Ubuntu auto-installed them, I installed them manually on windows): I tried uninstalling them, and then installing them back again, sadly that didn't help. I'm kind of lost here - can anyone think of anything else I should try? Thanks :)

  Read the article

• Trouble Starting MySL Community Server on Windows 7

  - by CodeAngel

  I have installed Netbeans 7 on my Windows 7. In addition, the MySQL Community Server 5.6.12 is installed with the MSI installer on thesame 7 PC. The MySQL server is integrated with the Netbeans IDE. However , it is not possible to start or stop the MySQL server from the command prompt or the Netbeans IDE. I am only able to start or stop the server from the Windows 7 services tool. Also , it is difficult running SQL queries from the Netbeans IDE even though it shows there is connection with the MySQL server. I have added the my.ini file to the installed directory of the MySQL server , that is : C:\Program Files\MySQL\MySQL Server 5.6 below is the my.ini file : # For advice on how to change settings please see # http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html # *** DO NOT EDIT THIS FILE. It's a template which will be copied to the # *** default location during install, and will be replaced if you # *** upgrade to a newer version of MySQL. [mysqld] # Remove leading # and set to the amount of RAM for the most important data # cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%. # innodb_buffer_pool_size = 128M # Remove leading # to turn on a very important data integrity option: logging # changes to the binary log between backups. # log_bin # These are commonly set, remove the # and set as required. # basedir = ..... # datadir = ..... port = 3306 # server_id = ..... # Remove leading # to set options mainly useful for reporting servers. # The server defaults are faster for transactions and fast SELECTs. # Adjust sizes as needed, experiment to find the optimal values. # join_buffer_size = 128M # sort_buffer_size = 2M # read_rnd_buffer_size = 2M sql_mode=NO_ENGINE_SUBSTITUTION,STRICT_TRANS_TABLES Any suggestion is welcomed.

  Read the article

• Fedora 13 becomes unresponsive when too many applications running.

  - by user61766

  I am using Fedora 13 64bit on Dell Vostro full 4GB RAM system with default Gnome GUI. This is very annoying problem that I don't how to fix except by rebooting the whole PC. When I have too many applications running ( like browser windows), the system start acting sluggish. The fist symptoms appear in Eclipse IDE which becomes so terrible it just becomes frozen for sometime one whole minute after I try to edit something in the editor. Then Firefox seems like it has crashed. Google Chrome becomes very unresponsive as well. All GUI applications including File manager becomes unresponsive. When I check System Monitor, the CPU is still around 20% and memory is at 80% but the system seems getting fried up. This progressively becomes worse until I soft reboot it or if I dont do it evetually the whole system is fried, no response to any keyboard key or mouse and I have to hit the hardware turn off button. I regularly yum update the system but this makes no difference. Please don't tell not to run too many applications because I need those for my work. I thought Linux is well designed Operating System but I am very disappointed so far. Can some one here help ?

  Read the article

• What could be causing windows to fail to sleep or hibernate, and revert system settings?

  - by xdumaine

  I am running Windows 8.1 on my system (Dell e6520) and the symptoms are this: My PC won't sleep or hibernate. It the screen turns off, but the fans just run and run, and after a little while, it completely shuts down, and when I start it back up, everything is closed, like it was a fresh boot/restart. I'm have a weird issue with outlook described here and the fix works fine - modifying a registry value. The weirder part is that after my computer fails to sleep or hibernate, and it starts back up, the registry value is GONE, like I never modified it, and thus the outlook error message is back. I thought maybe a graphics driver was preventing the sleep/hibernate, so I attempted to uninstall the NVIDIA graphics driver and control panel. HOWEVER, once the computer fails to sleep/hibernate, the NVIDIA graphics driver and control panel appear BACK on my system, like I didn't uninstall them. What could be happening here? I really need to be able to sleep/hibernate so I don't lose work or my work state, and these issues are really concerning. What I've tried, without success: Uninstalling graphics driver mentioned above Disabling hibernate and using sleep disabling/re-enabling hibernate Disabling startup items Sleeping as local system admin account disconnecting all USB, network, and bluetooth devices

  Read the article

• BYOD (accessing files) on a domain without joining?

  - by Philip White

  I run a Samba 4 instance at a small private school. This makes a regular Linux server appear as a directory controller. There are two relevant benefits to this: I have a Samba share for people's documents, and I use the Redirected Folders feature to allow any employee to sit down at any PC, log in with their domain credentials, and their My Documents points to network storage. Everyone has a mapped drive (using Group Policy Preferences) to a share specific to their account type. Students can access one share (one share for all students), teachers have another, and office staff have another. However, I would like to allow BYOD (Bring Your Own Device). Some employees are already asking for it with their personal laptops, and I know eventually most everyone will want to. Is there any way to replicate the two features above without having to join PCs to the domain? Joining personal PCs is impractical if only because only professional editions of Windows support this. Ideally, any operating system (including mobile) could access the relevant shares, but of course Windows is key. Offline caching is optional. (I could set up OpenVPN for teachers who want to access their files from home.) The problem with simply giving SSH access to the relevant shares is primarily that Samba 4 relies on ext4 ACLs and ext4 extended attributes to maintain NTFS permissions. Writing files directly to the Linux server would bypass this and would (probably) not be interoperable with Samba4. Right now I am completely flexible. I am even fine with scrapping the whole domain and using some other software for the two features above. How can I allow school employees and students freedom to securely share files without requiring everyone to have specific editions of Windows?

  Read the article

• how to debug "deep" crashes in Android?

  - by eerok512

  Hi All, I've been trying to debug an android crash that is occurring without a Java Stack Trace... Java Stack Trace bugs are very easy for me to fix... but this bug I'm getting seems to be crashing inside the "NDK" or whatever it is the deep internals of Android are called... I've made no modifications to the NDK btw... I just dunno what else to call that layer hehe. Anyway I'm mainly looking for advice on deep-debug methods, rather than help with this specific problem... because I doubt I can post all the source code involved... so really I just need to know how to set breakpoints at the deep layers or whatever other methods there are to trace deep-crashes to their source... so I will briefly describe the bug and then post a LogCat. I have an app with 7 Activities Activity_INTRO Activity_EULA Activity_MAIN Activity_Contact Activity_News Activity_Library Activity_More INTRO is the initiating one... it fades in some company logos... after displaying them for a set time it jumps to the EULA activity... after the user accepts the EULA, it jumps to MAIN... MAIN then creates a TabHost and populates it with the 4 remaining activities now heres the thing... when I click on say, the More tab of the TabHost, the app pauses for a few seconds and then hard-crashes... no java stack trace, but an actual ASM level trace with the registers and IP and stack... the same thing occurs no matter which tab I select, Contact, News, Library, More... all of them crash with the same hard-crash if however I set the manifest to start the app at Activity_MAIN, bypassing the INTRO and EULA, then these crashes do not occur... so something is lingering from those opening activities that is somehow hosing the TabHost'ed Activities... and I'm wondering what the hell that could be... because I'm using finish() on those activites when they need to jump... in fact here is how I'm doing it let me know if you see any bugs: when jumping from INTRO to EULA I do: //Display the EULA Intent newIntent = new Intent (avi, Activity_EULA.class); startActivity (newIntent); finish(); and EULA to MAIN: Intent newIntent = new Intent (this, Activity_Main.class); startActivity (newIntent); finish(); anyway, here is the hard crash log... please let me know if there is some way I can reverse engineer either /system/lib/libcutils.so or /system/lib/libandroid_runtime.so, because I think the crash is happening in one of them... i think its happening in the libandroid_runtime in fact.... anyway on to the log: 12-25 00:56:07.322: INFO/DEBUG(551): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** 12-25 00:56:07.332: INFO/DEBUG(551): Build fingerprint: 'generic/sdk/generic/:1.5/CUPCAKE/150240:eng/test-keys' 12-25 00:56:07.362: INFO/DEBUG(551): pid: 722, tid: 723 >>> com.killerapps.chokes <<< 12-25 00:56:07.362: INFO/DEBUG(551): signal 11 (SIGSEGV), fault addr 00000004 12-25 00:56:07.362: INFO/DEBUG(551): r0 00000004 r1 40021800 r2 00000004 r3 ad3296c5 12-25 00:56:07.372: INFO/DEBUG(551): r4 00000000 r5 00000000 r6 ad342da5 r7 41039fb8 12-25 00:56:07.372: INFO/DEBUG(551): r8 100ffcb0 r9 41039fb0 10 41e014a0 fp 00001071 12-25 00:56:07.382: INFO/DEBUG(551): ip ad35b874 sp 100ffc98 lr ad3296cf pc afb045a8 cpsr 00000010 12-25 00:56:07.552: INFO/DEBUG(551): #00 pc 000045a8 /system/lib/libcutils.so 12-25 00:56:07.572: INFO/DEBUG(551): #01 lr ad3296cf /system/lib/libandroid_runtime.so 12-25 00:56:07.582: INFO/DEBUG(551): stack: 12-25 00:56:07.582: INFO/DEBUG(551): 100ffc58 00000000 12-25 00:56:07.592: INFO/DEBUG(551): 100ffc5c 001c5278 [heap] 12-25 00:56:07.602: INFO/DEBUG(551): 100ffc60 000000da 12-25 00:56:07.602: INFO/DEBUG(551): 100ffc64 0016c778 [heap] 12-25 00:56:07.602: INFO/DEBUG(551): 100ffc68 100ffcc8 12-25 00:56:07.602: INFO/DEBUG(551): 100ffc6c 001c5278 [heap] 12-25 00:56:07.612: INFO/DEBUG(551): 100ffc70 427d1ac0 12-25 00:56:07.612: INFO/DEBUG(551): 100ffc74 000000c1 12-25 00:56:07.612: INFO/DEBUG(551): 100ffc78 40021800 12-25 00:56:07.612: INFO/DEBUG(551): 100ffc7c 000000c2 12-25 00:56:07.612: INFO/DEBUG(551): 100ffc80 00000000 12-25 00:56:07.612: INFO/DEBUG(551): 100ffc84 00000000 12-25 00:56:07.622: INFO/DEBUG(551): 100ffc88 00000000 12-25 00:56:07.622: INFO/DEBUG(551): 100ffc8c 00000000 12-25 00:56:07.622: INFO/DEBUG(551): 100ffc90 df002777 12-25 00:56:07.632: INFO/DEBUG(551): 100ffc94 e3a070ad 12-25 00:56:07.632: INFO/DEBUG(551): #00 100ffc98 00000000 12-25 00:56:07.632: INFO/DEBUG(551): 100ffc9c ad3296cf /system/lib/libandroid_runtime.so 12-25 00:56:07.632: INFO/DEBUG(551): 100ffca0 100ffcd0 12-25 00:56:07.642: INFO/DEBUG(551): 100ffca4 ad342db5 /system/lib/libandroid_runtime.so 12-25 00:56:07.642: INFO/DEBUG(551): 100ffca8 410a79d0 12-25 00:56:07.642: INFO/DEBUG(551): 100ffcac ad00e3b8 /system/lib/libdvm.so 12-25 00:56:07.652: INFO/DEBUG(551): 100ffcb0 410a79d0 12-25 00:56:07.652: INFO/DEBUG(551): 100ffcb4 0016bac0 [heap] 12-25 00:56:07.662: INFO/DEBUG(551): 100ffcb8 ad342da5 /system/lib/libandroid_runtime.so 12-25 00:56:07.662: INFO/DEBUG(551): 100ffcbc 40021800 12-25 00:56:07.662: INFO/DEBUG(551): 100ffcc0 410a79d0 12-25 00:56:07.662: INFO/DEBUG(551): 100ffcc4 afe39dd0 12-25 00:56:07.662: INFO/DEBUG(551): 100ffcc8 100ffcd0 12-25 00:56:07.662: INFO/DEBUG(551): 100ffccc ad040a8d /system/lib/libdvm.so 12-25 00:56:07.672: INFO/DEBUG(551): 100ffcd0 41039fb0 12-25 00:56:07.672: INFO/DEBUG(551): 100ffcd4 420000f8 12-25 00:56:07.672: INFO/DEBUG(551): 100ffcd8 ad342da5 /system/lib/libandroid_runtime.so 12-25 00:56:07.672: INFO/DEBUG(551): 100ffcdc 100ffd48 12-25 00:56:07.852: DEBUG/dalvikvm(722): GC freed 367 objects / 15144 bytes in 210ms 12-25 00:56:08.081: DEBUG/InetAddress(722): www.akillerapp.com: 74.86.47.202 (family 2, proto 6) 12-25 00:56:08.242: DEBUG/dalvikvm(722): GC freed 62 objects / 2328 bytes in 122ms 12-25 00:56:08.771: DEBUG/dalvikvm(722): GC freed 245 objects / 11744 bytes in 179ms 12-25 00:56:09.131: INFO/ActivityManager(577): Process com.killerapps.chokes (pid 722) has died. 12-25 00:56:09.171: INFO/WindowManager(577): WIN DEATH: Window{43719320 com.killerapps.chokes/com.killerapps.chokes.Activity_Main paused=false} 12-25 00:56:09.251: INFO/DEBUG(551): debuggerd committing suicide to free the zombie! 12-25 00:56:09.291: DEBUG/Zygote(553): Process 722 terminated by signal (11) 12-25 00:56:09.311: INFO/DEBUG(781): debuggerd: Jun 30 2009 17:00:51 12-25 00:56:09.331: WARN/InputManagerService(577): Got RemoteException sending setActive(false) notification to pid 722 uid 10020

  Read the article

• Mobile enabled web apps with ASP.NET MVC 3 and jQuery Mobile

  - by shiju

  In my previous blog posts, I have demonstrated a simple web app using ASP.NET MVC 3 and EF Code First. In this post, I will be focus on making this application for mobile devices. A single web site will be used for both mobile browsers and desktop browsers. If users are accessing the web app from mobile browsers, users will be redirect to mobile specific pages and will get normal pages if users are accessing from desktop browsers. In this demo app, the mobile specific pages are maintained in an ASP.NET MVC Area named Mobile and mobile users will be redirect to MVC Area Mobile. Let’s add a new area named Mobile to the ASP.NET MVC app. For adding Area, right click the ASP.NET MVC project and  select Area from Add option. Our mobile specific pages using jQuery Mobile will be maintained in the Mobile Area. ASP.NET MVC Global filter for redirecting mobile visitors to Mobile area Let’s add an ASP.NET MVC Global filter for redirecting mobile visitors to Mobile area. The below Global filter is taken from the sample app http://aspnetmobilesamples.codeplex.com/ created by the ASP.NET team. The below filer will redirect the Mobile visitors to an ASP.NET MVC Area Mobile. public class RedirectMobileDevicesToMobileAreaAttribute : AuthorizeAttribute     {         protected override bool AuthorizeCore(System.Web.HttpContextBase httpContext)         {             // Only redirect on the first request in a session             if (!httpContext.Session.IsNewSession)                 return true;               // Don't redirect non-mobile browsers             if (!httpContext.Request.Browser.IsMobileDevice)                 return true;               // Don't redirect requests for the Mobile area             if (Regex.IsMatch(httpContext.Request.Url.PathAndQuery, "/Mobile($|/)"))                 return true;               return false;         }           protected override void HandleUnauthorizedRequest(AuthorizationContext filterContext)         {             var redirectionRouteValues = GetRedirectionRouteValues(filterContext.RequestContext);             filterContext.Result = new RedirectToRouteResult(redirectionRouteValues);         }           // Override this method if you want to customize the controller/action/parameters to which         // mobile users would be redirected. This lets you redirect users to the mobile equivalent         // of whatever resource they originally requested.         protected virtual RouteValueDictionary GetRedirectionRouteValues(RequestContext requestContext)         {             return new RouteValueDictionary(new { area = "Mobile", controller = "Home", action = "Index" });         }     } Let’s add the global filer RedirectMobileDevicesToMobileAreaAttribute to the global filter collection in the Application_Start() of Global.asax.cs file   GlobalFilters.Filters.Add(new RedirectMobileDevicesToMobileAreaAttribute(), 1); Now your mobile visitors will be redirect to the Mobile area. But the browser detection logic in the RedirectMobileDevicesToMobileAreaAttribute filter will not be working in some modern browsers and some conditions. But the good news is that ASP.NET’s browser detection feature is extensible and will be greatly working with the open source framework 51Degrees.mobi. 51Degrees.mobi is a Browser Capabilities Provider that will be working with ASP.NET’s Request.Browser and will provide more accurate and detailed information. For more details visit the documentation page at http://51degrees.codeplex.com/documentation. Let’s add a reference to 51Degrees.mobi library using NuGet We can easily add the 51Degrees.mobi from NuGet and this will update the web.config for necessary configuartions. Mobile Web App using jQuery Mobile Framework jQuery Mobile Framework is built on top of jQuery that provides top-of-the-line JavaScript in a unified User Interface that works across the most-used smartphone web browsers and tablet form factors. It provides an easy way to develop user interfaces for mobile web apps. The current version of the framework is jQuery Mobile Alpha 3. We need to include the following files to use jQuery Mobile. The jQuery Mobile CSS file (jquery.mobile-1.0a3.min.css) The jQuery library (jquery-1.5.min.js) The jQuery Mobile library (jquery.mobile-1.0a3.min.js) Let’s add the required jQuery files directly from jQuery CDN . You can download the files and host them on your own server. jQuery Mobile page structure The basic jQuery Mobile page structure is given below <!DOCTYPE html> <html>   <head>   <title>Page Title</title>   <link rel="stylesheet" href="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a1.min.css" />   <script src="http://code.jquery.com/jquery-1.5.min.js"></script>   <script src="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a3.min.js"></script> </head> <body> <div data-role="page">   <div data-role="header">     <h1>Page Title</h1>   </div>   <div data-role="content">     <p>Page content goes here.</p>      </div>   <div data-role="footer">     <h4>Page Footer</h4>   </div> </div> </body> </html> The data- attributes are the new feature of HTML5 so that jQuery Mobile will be working on browsers that supporting HTML 5. You can get a detailed browser support details from http://jquerymobile.com/gbs/ . In the Head section we have included the Core jQuery javascript file and jQuery Mobile Library and the core CSS Library for the UI Element Styling. These jQuery files are minified versions and will improve the performance of page load on Mobile Devices. The jQuery Mobile pages are identified with an element with the data-role="page" attribute inside the <body> tag. <div data-role="page"> </div> Within the "page" container, any valid HTML markup can be used, but for typical pages in jQuery Mobile, the immediate children of a "page" are div element with data-roles of "header", "content", and "footer". <div data-role="page">     <div data-role="header">...</div>     <div data-role="content">...</div>     <div data-role="footer">...</div> </div> The div data-role="content" holds the main content of the HTML page and will be used for making user interaction elements. The div data-role="header" is header part of the page and div data-role="footer" is the footer part of the page. Creating Mobile specific pages in the Mobile Area Let’s create Layout page for our Mobile area <!DOCTYPE html> <html> <head>     <title>@ViewBag.Title</title>     <link rel="stylesheet" href="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a3.min.css" />     <script src="http://code.jquery.com/jquery-1.5.min.js"></script>     <script src="http://code.jquery.com/mobile/1.0a3/jquery.mobile-1.0a3.min.js"></script>     </head>      <body> @RenderBody()    </body> </html> In the Layout page, I have given reference to jQuery Mobile JavaScript files and the CSS file. Let’s add an Index view page Index.chtml @{     ViewBag.Title = "Index"; } <div data-role="page"> <div data-role="header">      <h1>Expense Tracker Mobile</h1> </div> <div data-role="content">   <ul data-role="listview">     <li>@Html.Partial("_LogOnPartial")</li>      <li>@Html.ActionLink("Home", "Index", "Home")</li>      <li>@Html.ActionLink("Category", "Index", "Category")</li>                          <li>@Html.ActionLink("Expense", "Index", "Expense")</li> </ul> </div> <div data-role="footer">           Shiju Varghese | <a href="http://weblogs.asp.net/shijuvarghese">Blog     </a> | <a href="http://twitter.com/shijucv">Twitter</a>   </div> </div>   In the Index page, we have used data-role “listview” for showing our content as List View Let’s create a data entry screen create.cshtml @model MyFinance.Domain.Category @{     ViewBag.Title = "Create Category"; }   <div data-role="page"> <div data-role="header">      <h1>Create Category</h1>             @Html.ActionLink("Home", "Index","Home",null, new { @class = "ui-btn-right" })      </div>       <div data-role="content">     @using (Html.BeginForm("Create","Category",FormMethod.Post))     {       <div data-role="fieldcontain">        @Html.LabelFor(model => model.Name)        @Html.EditorFor(model => model.Name)        <div>           @Html.ValidationMessageFor(m => m.Name)        </div>         </div>         <div data-role="fieldcontain">         @Html.LabelFor(model => model.Description)         @Html.EditorFor(model => model.Description)                   </div>                    <div class="ui-body ui-body-b">         <button type="submit" data-role="button" data-theme="b">Save</button>       </div>     }        </div> </div>   In jQuery Mobile, the form elements should be placed inside the data-role="fieldcontain" The below screen shots show the pages rendered in mobile browser Index Page Create Page Source Code You can download the source code from http://efmvc.codeplex.com   Summary We have created a single  web app for desktop browsers and mobile browsers. If a user access the site from desktop browsers, users will get normal web pages and get mobile specific pages if users access from mobile browsers. If users are accessing the website from mobile devices, we will redirect to a ASP.NET MVC area Mobile. For redirecting to the Mobile area, we have used a Global filer for the redirection logic and used open source framework 51Degrees.mobi for the better support for mobile browser detection. In the Mobile area, we have created the pages using jQuery Mobile and users will get mobile friendly web pages. We can create great mobile web apps using ASP.NET MVC  and jQuery Mobile Framework.

  Read the article

• CodePlex Daily Summary for Thursday, March 01, 2012

  CodePlex Daily Summary for Thursday, March 01, 2012Popular ReleasesMetodología General Ajustada - MGA: 01.09.08: Cambios John: Cambios en el MDI: Habilitación del menú e ícono de Imprimir. Deshabilitación de menú Ayuda y opciones de Importar y Exportar del menú Proyectos temporalmente. Integración con código de Crystal Report. Validaciones con Try-Catch al generar los reportes, personalización de los formularios en estilos y botones y validación de selección de tipo de reporte. Creación de instalador con TODOS los cambios y la creación de las carpetas asociadas a los RPT.WatchersNET CKEditor™ Provider for DotNetNuke®: CKEditor Provider 1.14.01: Whats NewAdded New Plugin "Ventrian News Articles Link Selector" to select an Article Link from the News Article Module (This Plugin is not visible by default in your Toolbar, you need to manually add the 'newsarticleslinks' to your toolbarset) http://www.watchersnet.de/Portals/0/screenshots/dnn/CKEditorNewsArticlesLinks.png File-Browser: Added Paging to the Files List. You can define the Page Size in the Options (Default Value: 20) http://www.watchersnet.de/Portals/0/screenshots/dnn/CKEdito...MyRouter (Virtual WiFi Router): MyRouter 1.0 (Beta): A friendlier User Interface. A logger file to catch exceptions so you may send it to use to improve and fix any bugs that may occur. A feedback form because we always love hearing what you guy's think of MyRouter. Check for update menu item for you to stay up to date will the latest changes. Facebook fan page so you may spread the word and share MyRouter with friends and family And Many other exciting features were sure your going to love!WPF Sound Visualization Library: WPF SVL 0.3 (Source, Binaries, Examples, Help): Version 0.3 of WPFSVL. This includes three new controls: an equalizer, a digital clock, and a time editor.Thai Flood Watch: Thai Flood Watch - Source: non commercial use only ** This project supported by Department of Computer Science KhonKaen University Thailand.ZXing.Net: ZXing.Net 0.4.0.0: sync with rev. 2196 of the java version important fix for RGBLuminanceSource generating barcode bitmaps Windows Phone demo client (only tested with emulator, because I don't have a Windows Phone) Barcode generation support for Windows Forms demo client Webcam support for Windows Forms demo clientOrchard Project: Orchard 1.4: Please read our release notes for Orchard 1.4: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-Notes.NET Assembly Information: Assembly Information 2.1.0.1: - Fixed the issue in which AnyCPU binaries were shown as 32bit - Added support to show the errors in-case if some dlls failed to load.FluentData -Micro ORM with a fluent API that makes it simple to query a database: FluentData version 1.2: New features: - QueryValues method - Added support for automapping to enumerations (both int and string are supported). Fixed 2 reported issues.NetSqlAzMan - .NET SQL Authorization Manager: 3.6.0.15: 3.6.0.15 28-Feb-2012 • Fix: The communication object, System.ServiceModel.Channels.ServiceChannel, cannot be used for communication because it is in the Faulted state. Work Item 10435: http://netsqlazman.codeplex.com/workitem/10435 • Fix: Made StorageCache thread safe. Thanks to tangrl. • Fix: Members property of SqlAzManApplicationGroup is not functioning. Thanks to tangrl. Work Item 10267: http://netsqlazman.codeplex.com/workitem/10267 • Fix: Indexer are making database calls. Thanks to t...SCCM Client Actions Tool: Client Actions Tool v1.1: SCCM Client Actions Tool v1.1 is the latest version. It comes with following changes since last version: Added stop button to stop the ongoing process. Added action "Query update status". Added option "saveOnlineComputers" in config.ini to enable saving list of online computers from last session. Default value for "LatestClientVersion" set to SP2 R3 (4.00.6487.2157). Wuauserv service manual startup mode is considered healthy on Windows 7. Errors are now suppressed in checkReleases...Kinect PowerPoint Control: Kinect PowerPoint Control v1.1: Updated for Kinect SDK 1.0.SharpCompress - a fully native C# library for RAR, 7Zip, Zip, Tar, GZip, BZip2: SharpCompress 0.8: API Updates: SOLID Extract Method for Archives (7Zip and RAR). ExtractAllEntries method on Archive classes will extract archives as a streaming file. This can offer better 7Zip extraction performance if any of the entries are solid. The IsSolid method on 7Zip archives will return true if any are solid. Removed IExtractionListener was removed in favor of events. Unit tests show example. Bug fixes: PPMd passes tests plus other fixes (Thanks Pavel) Zip used to always write a Post Descri...Social Network Importer for NodeXL: SocialNetImporter(v.1.3): This new version includes: - Download new networks for Facebook fan pages. - New options for downloading more posts - Bug fixes To use the new graph data provider, do the following: Unzip the Zip file into the "PlugIns" folder that can be found in the NodeXL installation folder (i.e "C:\Program Files\Social Media Research Foundation\NodeXL Excel Template\PlugIns") Open NodeXL template and you can access the new importer from the "Import" menuASP.NET REST Services Framework: Release 1.1 - Standard version: Beginning from v1.1 the REST-services Framework is compatible with ASP.NET Routing model as well with CRUD (Create, Read, Update, and Delete) principle. These two are often important when building REST API functionality within your application. It also includes ability to apply Filters to a class to target all WebRest methods, as well as some performance enhancements. New version includes Metadata Explorer providing ability exploring the existing services that becomes essential as the number ...SQL Live Monitor: SQL Live Monitor 1.31: A quick fix to make it this version work with SQL 2012. Version 2 already has 2012 working, but am still developing the UI in version 2, so this is just an interim fix to allow user to monitor SQL 2012.Content Slider Module for DotNetNuke: 01.02.00: This release has the following updates and new features: Feature: One-Click Enabling of Pager Setting Feature: Cache Sliders for Performance Feature: Configurable Cache Setting Enhancement: Transitions can be Selected Bug: Secure Folder Images not Viewable Bug: Sliders Disappear on Postback Bug: Remote Images Cause Error Bug: Deleted Images Cause Error System Requirements DotNetNuke v06.00.00 or newer .Net Framework v3.5 SP1 or newer SQL Server 2005 or newerImage Resizer for Windows: Image Resizer 3 Preview 3: Here is yet another iteration toward what will eventually become Image Resizer 3. This release is stable. However, I'm calling it a preview since there are still many features I'd still like to add before calling it complete. Updated on February 28 to fix an issue with installing on multi-user machines. As usual, here is my progress report. Done Preview 3 Fix: 3206 3076 3077 5688 Fix: 7420 Fix: 7527 Fix: 7576 7612 Preview 2 6308 6309 Fix: 7339 Fix: 7357 Preview 1 UI...Finestra Virtual Desktops: 2.5.4500: This is a bug fix release for version 2.5. It fixes several things and adds a couple of minor features. See the 2.5 release notes for more information on the major new features in that version. Important - If Finestra crashes on startup for you, you must install the Visual C++ 2010 runtime from http://www.microsoft.com/download/en/details.aspx?id=5555. Fixes a bug with window animations not refreshing the screen on XP and with DWM off Fixes a bug with with crashing on XP due to a bug in t...Media Companion: MC 3.432b Release: General Now remembers window location. Catching a few more exceptions when an image is blank TV A couple of UI tweaks Movies Fixed the actor name displaying HTML Fixed crash when using Save files as "movie.nfo", "movie.tbn", & "fanart.jpg" New CSV template for HTML output function Added <createdate> tag for HTML output A couple of UI tweaks Known Issues Multiepisodes are not handled correctly in MC. The created nfo is valid, but they are not displayed in MC correctly & saving the...New Projectsabac: abac cn websiteAION Launcher: simple aion launcher...just edit the background image of your choosing inside the code and other things such as the links for the buttons and the ip adress and port of the serverAXTFSTool: Dynamics AX tool that connects to your project's TFS and lists the objects your colleagues have changed. Written in C#, still under development and improvements. Useful for team leaders, deployment managers, etc.cookieTopo: Topo map viewerCrmFetchKit.js: Simple Library at allows the execution of fetchxml queries via JavaScript for Dynamics CRM 2011 (using the new WCF endpoints). Like the CrmRestKit this framework uses the promise/A capacities of jQuery. The code and the idea for this framework bases on the CrmServiceToolkit (http://crmtoolkit.codeplex.com/) developed by Daniel Cai. cy univerX engine: ????????DNSAPI.NET: A common API for managing DNS servers on Windows. This project is based on the work I started back in 2002 when I needed to create a web front-end for Windows' DNS server using the .Net framework. The plan is to expand on the project and include support for the BIND server on Windows too. ego.net: ego.netfdTFS: Team Foundation Server Source Control Plugin for FlashDevelopGeoWPS: GeoWPS is an implementation of the OGC WPS. It will be developed in C#. IThink: A new project.King Garden: Boy King's .net practical projects.King Garret: Boy King's .net learning projects.LottoCheck: Follow LottoNot-Terraria: This is a like terraria game but NOT terrariaPassword Protector: Password Protector SharePoint 2010 BlobCache Manager: Manage your web application's blobcache settings directly in the central administration.SharePoint 2010 SilverLight Multiple File Uploader: SharePoint 2010 SilverLight Multiple File Uploader for Documents Libraries with MetaData.Sharepoint Tool Collection: I want to Integrate Various Utilities of Sharepoint at one place. It is for easy working of user or developer. Ex-1. A utility which takes some params & csv file and upload 100s of items on the sharepoint list easily. Ex-2 A utility to upload documents in a library. etc.SQLCLR Cmd Exec Framework Example: For users of MS SQL Server, xp_cmdshell is a utility that we usually want to have disabled. However there are still cases where calling a command line is needed. This project provides an framework/example to make command line calls. It is not meant as an xp_cmdshell replacement but as a workaround.Symmetric Designs Python 3.2: Symmetric Designs for Python 3.2 helps graphical artists to design and develop their own designs freestyle. It uses the pygame module for Python 3.2. It can also be analysed in order to get a grasp of graphics programming in Python.Terminsoft open CLR libraries: Terminsoft open CLR libraries. The first is Terminsoft.Intervals, intended for modeling the sets of intervals with elements, the comparison operation is defined for. The second is Terminsoft.Syntax, intended for text parsing and transformation and built upon regular expressions.Thai Flood Watch: Thai Flood Watch provides useful information, up-to-date and visual access to the major canal in Bangkok, Thailand using data from department of drainage and sewerage. Easily monitor river and canal flow information in Bangkok area, right from your hand.TheNerd: Sample video game source code. Using Sunburn.Unity.WebAPI: A library that allows simple Integration of Microsoft's Unity IoC container with ASP.NET's WebAPI. This project includes a bespoke DependencyResolver that creates a child container per HTTP request and disposes of all registered IDisposable instances at the end of the request.Wholemy.RemoteTouch: The project is a remote touch-sensitive keyboard with a customizable interface which allows to supplement control of another computer, regardless of the wires. For example, if you have not so fast Tablet PC - a client and a fast desktop computer - the server using the network.WindowPlace: WindowPlace makes it possible to save Window positions and sizes to a profile. Switching between profiles will effortlessly move and resize your windows. Help improve productivity - especially for multi-monitor systems. Developed in C# using WPF and a few Windows API calls in the background. WP Error Manager (Devv.Core.WPErrorManager): Library to log, handle and report errors on Windows Phone 7 apps. Fully customizable and extremely easy to implement. Works with any WP7 app. Tested with the emulator, Nokia Lumia 800 and Samsung Focus Flash.WPMatic: Windows Phone7 App to manage Homematic (eQ-3) Devices. The App is like the Homematic Central Configuration Unit (CCU) in German.www.Nabaza.com Freeware and Ebooks: www.Nabaza.com Freeware and Ebooks by William R. NabazaZap: Zap is a light weight .NET communication framework. It is designed for programs running in local area network. Zap provides code generation tool that enables user to call remote methods, add/remote event listener to remote objects, while hides the lower details.

  Read the article

• Microsoft Declares the Future of ASP.NET is Web API

  - by sbwalker

  Sitting on a plane on my way home from Tech Ed 2012 in Orlando, I thought it would be a good time to jot down some key takeaways from this year’s conference. Some of these items I have known since the Microsoft MVP Summit which occurred in Redmond in late February ( but due to NDA restrictions I could not share them with the developer community at large ) and some of them are a result of insightful conversations with a wide variety of industry insiders and Microsoft employees at the conference. First, let’s travel back in time 4 years to the Microsoft MVP Summit in 2008. Microsoft was facing some heat from market newcomer Ruby on Rails and responded with a new web development framework of its own, ASP.NET MVC. At the Summit they estimated that MVC would only be applicable for ~10% of all new web development projects. Based on that prediction I questioned why they were investing such considerable resources for such a relative edge case, but my guess is that they felt it was an important edge case at the time as some of the more vocal .NET evangelists as well as some very high profile start-ups ( ie. Twitter ) had publicly announced their intent to use Rails. Microsoft made a lot of noise about MVC. In fact, they focused so much of their messaging and marketing hype around MVC that it appeared that WebForms was essentially dead. Yes, it may have been true that Microsoft continued to invest in WebForms, but from an outside perspective it really appeared that MVC was the only framework getting any real attention. As a result, MVC started to gain market share. An inside source at Microsoft told me that MVC usage has grown at a rate of about 5% per year and now sits at ~30%. Essentially by focusing so much marketing effort on MVC, Microsoft actually created a larger market demand for it.  This is because in the Microsoft ecosystem there is somewhat of a bandwagon mentality amongst developers. If Microsoft spends a lot of time talking about a specific technology, developers get the perception that it must be really important. So rather than choosing the right tool for the job, they often choose the tool with the most marketing hype and then try to sell it to the customer. In 2010, I blogged about the fact that MVC did not make any business sense for the DotNetNuke platform. This was because our ecosystem relied on third party extensions which were dependent on the WebForms model. If we migrated the core to MVC it would mean that all of the third party extensions would no longer be compatible, which would be an irresponsible business decision for us to make at the expense of our users and customers. However, this did not stop the debate from continuing to occur in our ecosystem. Clearly some developers had drunk Microsoft’s Kool-Aid about MVC and were of the mindset, to paraphrase an old Scottish saying, “If its not MVC, it’s crap”. Now, this is a rather ignorant position to take as most of the benefits of MVC can be achieved in WebForms with solid architecture and responsible coding practices. Clean separation of concerns, unit testing, and direct control over page output are all possible in the WebForms model – it just requires diligence and discipline. So over the past few years some horror stories have begun to bubble to the surface of software development projects focused on ground-up rewrites of web applications for the sole purpose of migrating from WebForms to MVC. These large scale rewrites were typically initiated by engineering teams with only a single argument driving the business decision, that Microsoft was promoting MVC as “the future”. These ill-fated rewrites offered no benefit to end users or customers and in fact resulted in a less stable, less scalable and more complicated systems – basically taking one step forward and two full steps back. A case in point is the announcement earlier this week that a popular open source .NET CMS provider has decided to pull the plug on their new MVC product which has been under active development for more than 18 months and revert back to WebForms. The availability of multiple server-side development models has deeply fragmented the Microsoft developer community. Some folks like to compare it to the age-old VB vs. C# language debate. However, the VB vs. C# language debate was ultimately more of a religious war because at least the two dominant programming languages were compatible with one another and could be used interchangeably. The issue with WebForms vs. MVC is much more challenging. This is because the messaging from Microsoft has positioned the two solutions as being incompatible with one another and as a result web developers feel like they are forced to choose one path or another. Yes, it is true that it has always been technically possible to use WebForms and MVC in the same project, but the tooling support has always made this feel “dirty”. The fragmentation has also made it difficult to attract newcomers as the perceived barrier to entry for learning ASP.NET has become higher. As a result many new software developers entering the market are gravitating to environments where the development model seems more simple and intuitive ( ie. PHP or Ruby ). At the same time that the Web Platform team was busy promoting ASP.NET MVC, the Microsoft Office team has been promoting Sharepoint as a platform for building internal enterprise web applications. Sharepoint has great penetration in the enterprise and over time has been enhanced with improved extensibility capabilities for software developers. But, like many other mature enterprise ASP.NET web applications, it is built on the WebForms development model. Similar to DotNetNuke, Sharepoint leverages a rich third party ecosystem for both generic web controls and more specialized WebParts – both of which rely on WebForms. So basically this resulted in a situation where the Web Platform group had headed off in one direction and the Office team had gone in another direction, and the end customer was stuck in the middle trying to figure out what to do with their existing investments in Microsoft technology. It really emphasized the perception that the left hand was not speaking to the right hand, as strategically speaking there did not seem to be any high level plan from Microsoft to ensure consistency and continuity across the different product lines. With the introduction of ASP.NET MVC, it also made some of the third party control vendors scratch their heads, and wonder what the heck Microsoft was thinking. The original value proposition of ASP.NET over Classic ASP was the ability for web developers to emulate the highly productive desktop development model by using abstract components for creating rich, interactive web interfaces. Web control vendors like Telerik, Infragistics, DevExpress, and ComponentArt had all built sizable businesses offering powerful user interface components to WebForms developers. And even after MVC was introduced these vendors continued to improve their products, offering greater productivity and a superior user experience via AJAX to what was possible in MVC. And since many developers were comfortable and satisfied with these third party solutions, the demand remained strong and the third party web control market continued to prosper despite the availability of MVC. While all of this was going on in the Microsoft ecosystem, there has also been a fundamental shift in the general software development industry. Driven by the explosion of Internet-enabled devices, the focus has now centered on service-oriented architecture (SOA). Service-oriented architecture is all about defining a public API for your product that any client can consume; whether it’s a native application running on a smart phone or tablet, a web browser taking advantage of HTML5 and Javascript, or a rich desktop application running on a PC. REST-based services which utilize the less verbose characteristics of JSON as a transport mechanism, have become the preferred approach over older, more bloated SOAP-based techniques. SOA also has the benefit of producing a cross-platform API, as every major technology stack is able to interact with standard REST-based web services. And for web applications, more and more developers are turning to robust Javascript libraries like JQuery and Knockout for browser-based client-side development techniques for calling web services and rendering content to end users. In fact, traditional server-side page rendering has largely fallen out of favor, resulting in decreased demand for server-side frameworks like Ruby on Rails, WebForms, and (gasp) MVC. In response to these new industry trends, Microsoft did what it always does – it immediately poured some resources into developing a solution which will ensure they remain relevant and competitive in the web space. This work culminated in a new framework which was branded as Web API. It is convention-based and designed to embrace native HTTP standards without copious layers of abstraction. This framework is designed to be the ultimate replacement for both the REST aspects of WCF and ASP.NET MVC Web Services. And since it was developed out of band with a dependency only on ASP.NET 4.0, it means that it can be used immediately in a variety of production scenarios. So at Tech Ed 2012 it was made abundantly clear in numerous sessions that Microsoft views Web API as the “Future of ASP.NET”. In fact, one Microsoft PM even went as far as to say that if we look 3-4 years into the future, that all ASP.NET web applications will be developed using the Web API approach. This is a fairly bold prediction and clearly telegraphs where Microsoft plans to allocate its resources going forward. Currently Web API is being delivered as part of the MVC4 package, but this is only temporary for the sake of convenience. It also sounds like there are still internal discussions going on in terms of how to brand the various aspects of ASP.NET going forward – perhaps the moniker of “ASP.NET Web Stack” coined a couple years ago by Scott Hanselman and utilized as part of the open source release of ASP.NET bits on Codeplex a few months back will eventually stick. Web API is being positioned as the unification of ASP.NET – the glue that is able to pull this fragmented mess back together again. The  “One ASP.NET” strategy will promote the use of all frameworks - WebForms, MVC, and Web API, even within the same web project. Basically the message is utilize the appropriate aspects of each framework to solve your business problems. Instead of navigating developers to a fork in the road, the plan is to educate them that “hybrid” applications are a great strategy for delivering solutions to customers. In addition, the service-oriented approach coupled with client-side development promoted by Web API can effectively be used in both WebForms and MVC applications. So this means it is also relevant to application platforms like DotNetNuke and Sharepoint, which means that it starts to create a unified development strategy across all ASP.NET product lines once again. And so what about MVC? There have actually been rumors floated that MVC has reached a stage of maturity where, similar to WebForms, it will be treated more as a maintenance product line going forward ( MVC4 may in fact be the last significant iteration of this framework ). This may sound alarming to some folks who have recently adopted MVC but it really shouldn’t, as both WebForms and MVC will continue to play a vital role in delivering solutions to customers. They will just not be the primary area where Microsoft is spending the majority of its R&D resources. That distinction will obviously go to Web API. And when the question comes up of why not enhance MVC to make it work with Web API, you must take a step back and look at this from the higher level to see that it really makes no sense. MVC is a server-side page compositing framework; whereas, Web API promotes client-side page compositing with a heavy focus on web services. In order to make MVC work well with Web API, would require a complete rewrite of MVC and at the end of the day, there would be no upgrade path for existing MVC applications. So it really does not make much business sense. So what does this have to do with DotNetNuke? Well, around 8-12 months ago we recognized the software industry trends towards web services and client-side development. We decided to utilize a “hybrid” model which would provide compatibility for existing modules while at the same time provide a bridge for developers who wanted to utilize more modern web techniques. Customers who like the productivity and familiarity of WebForms can continue to build custom modules using the traditional approach. However, in DotNetNuke 6.2 we also introduced a new Service Framework which is actually built on top of MVC2 ( we chose to leverage MVC because it had the most intuitive, light-weight REST implementation in the .NET stack ). The Services Framework allowed us to build some rich interactive features in DotNetNuke 6.2, including the Messaging and Notification Center and Activity Feed. But based on where we know Microsoft is heading, it makes sense for the next major version of DotNetNuke ( which is expected to be released in Q4 2012 ) to migrate from MVC2 to Web API. This will likely result in some breaking changes in the Services Framework but we feel it is the best approach for ensuring the platform remains highly modern and relevant. The fact that our development strategy is perfectly aligned with the “One ASP.NET” strategy from Microsoft means that our customers and developer community can be confident in their current and future investments in the DotNetNuke platform.

  Read the article

• CodePlex Daily Summary for Friday, January 07, 2011

  CodePlex Daily Summary for Friday, January 07, 2011Popular ReleasesAutoLoL: AutoLoL v1.5.2: Implemented the Auto Updater Fix: Your settings will no longer be cleared with new releases of AutoLoL The mastery Editor and Browser now have their own tabs instead of nested tabs The Browser tab will only show the masteries matching ALL filters instead of just one Added a 'Browse' button in the Mastery Editor tab to open the Masteries Directory The Browser tab now shows a message when there are no mastery files in the Masteries Directory Fix: Fixed the Save As dialog again, for ...Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.StyleCop for ReSharper: StyleCop for ReSharper 5.1.14980.000: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the correct path ...VivoSocial: VivoSocial 7.4.1: New release with bug fixes and updates for performance.SSH.NET Library: 2011.1.6: Fixes CommandTimeout default value is fixed to infinite. Port Forwarding feature improvements Memory leaks fixes New Features Add ErrorOccurred event to handle errors that occurred on different thread New and improve SFTP features SftpFile now has more attributes and some operations Most standard operations now available Allow specify encoding for command execution KeyboardInteractiveConnectionInfo class added for "keyboard-interactive" authentication. Add ability to specify bo....NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.03: Added lot's of new extensions and new projects for MVC and Entity Framework. object.FindTypeByRecursion Int32.InRange String.RemoveAllSpecialCharacters String.IsEmptyOrWhiteSpace String.IsNotEmptyOrWhiteSpace String.IfEmptyOrWhiteSpace String.ToUpperFirstLetter String.GetBytes String.ToTitleCase String.ToPlural DateTime.GetDaysInYear DateTime.GetPeriodOfDay IEnumberable.RemoveAll IEnumberable.Distinct ICollection.RemoveAll IList.Join IList.Match IList.Cast Array.IsNullOrEmpty Array.W...VidCoder: 0.8.0: Added x64 version. Made the audio output preview more detailed and accurate. If the chosen encoder or mixdown is incompatible with the source, the fallback that will be used is displayed. Added "Auto" to the audio mixdown choices. Reworked non-anamorphic size calculation to work better with non-standard pixel aspect ratios and cropping. Reworked Custom anamorphic to be more intuitive and allow display width to be set automatically (Thanks, Statick). Allowing higher bitrates for 6-ch....NET Voice Recorder: Auto-Tune Release: This is the source code and binaries to accompany the article on the Coding 4 Fun website. It is the Auto Tuner release of the .NET Voice Recorder application.BloodSim: BloodSim - 1.3.2.0: - Simulation Log is now automatically disabled and hidden when running 10 or more iterations - Hit and Expertise are now entered by Rating, and include option for a Racial Expertise bonus - Added option for boss to use a periodic magic ability (Dragon Breath) - Added option for boss to periodically Enrage, gaining a Damage/Attack Speed buffASP.NET MVC CMS ( Using CommonLibrary.NET ): CommonLibrary.NET CMS 0.9.5 Alpha: CommonLibrary CMSA simple yet powerful CMS system in ASP.NET MVC 2 using C# 4.0. ActiveRecord based components for Blogs, Widgets, Pages, Parts, Events, Feedback, BlogRolls, Links Includes several widgets ( tag cloud, archives, recent, user cloud, links twitter, blog roll and more ) Built using the http://commonlibrarynet.codeplex.com framework. ( Uses TDD, DDD, Models/Entities, Code Generation ) Can run w/ In-Memory Repositories or Sql Server Database See Documentation tab for Ins...AllNewsManager.NET: AllNewsManager.NET 1.2.1: AllNewsManager.NET 1.2.1 It is a minor update from version 1.2EnhSim: EnhSim 2.2.9 BETA: 2.2.9 BETAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in the Gobl...xUnit.net - Unit Testing for .NET: xUnit.net 1.7 Beta: xUnit.net release 1.7 betaBuild #1533 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision)...Json.NET: Json.NET 4.0 Release 1: New feature - Added Windows Phone 7 project New feature - Added dynamic support to LINQ to JSON New feature - Added dynamic support to serializer New feature - Added INotifyCollectionChanged to JContainer in .NET 4 build New feature - Added ReadAsDateTimeOffset to JsonReader New feature - Added ReadAsDecimal to JsonReader New feature - Added covariance to IJEnumerable type parameter New feature - Added XmlSerializer style Specified property support New feature - Added ...DbDocument: DbDoc Initial Version: DbDoc Initial versionASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.2: Atomic CMS 2.1.2 release notes Atomic CMS installation guide N2 CMS: 2.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) All-round improvements and bugfixes File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open the proj...Mobile Device Detection and Redirection: 0.1.11.10: IMPORTANT CHANGESThis release changes the way some WURFL capabilities and attributes are exposed to .NET developers. If you cast MobileCapabilities to return some values then please read the Release Note before implementing this release. The following code snippet can be used to access any WURFL capability. For instance, if the device is a tablet: string capability = Request.Browser["is_tablet"]; SummaryNew attributes have been added to the redirect section: originalUrlAsQueryString If se...Wii Backup Fusion: Wii Backup Fusion 1.0: - Norwegian translation - French translation - German translation - WBFS dump for analysis - Scalable full HQ cover - Support for log file - Load game images improved - Support for image splitting - Diff for images after transfer - Support for scrubbing modes - Search functionality for log - Recurse depth for Files/Load - Show progress while downloading game cover - Supports more databases for cover download - Game cover loading routines improvedBlogEngine.NET: BlogEngine.NET 2.0: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.0 instructions. To get started, be sure to check out our installatio...New Projects9192631770: This project is created for learning .net 3.5 personally. However it may not suffice for anyone to give a start point. (9192631770) is equivalent to 1 sec in atomic clock.AGS: AGSAll-In-One Code Framework Prerelease: All-In-One Code Framework PrereleaseAwait Events with "yield": This is a library that allows you to stop running the code wherever you want in order to await an event using the functionality of "yield" sentence. It's useful when you want to await asynchronous events or when you have to deal with many events in a sequential way.Battle.net SDK: This is a SDK that retrieves it's information from the Battle.Net community site. At the moment blizzard only supports this for World of Warcraft, so that's what our main aim is at the momeen.t C++ Hash Container Benchmark: C++ Hash Container Benchmark for STL map, C++0x unordered map, Boost unordered map, ATL map and ATL hash map for STL wide string and ATL CString.Colour Lovers .NET: A .NET library for the Colour Lovers API.DatingGame: Course to teach high-school aged girls basic T-SQL using a fun scenario - querying to find the hottest boys! Used at Microsoft DigiGirlz and TKP events. Included DDL script, CSV for bcp with data, PPTX, T-SQL Cheat Sheet and teaching tips. Enjoy!do-Dots open .NET SDK: The do-Dots open SDK brings developers a full set of classes that allow to build applications based on do-Dots, a framework for M2M communication. It's developed in C#. EFMVC - ASP.NET MVC 3 and EF Code First: Demo web app using ASP.NET MVC 3 and EF Code FirstGS1: D is a 2D game demo written in C++ and using an API : HAPI for the graphic part and the audio part. All the xml files are handled with tinyXML. It is a vertical scrolling shoot'em up where the player controls a dragon flying in Central Park.GS2: In Zombies, you are a wizard, the most powerful wizard in the world, and two days ago, the Devil forces began to attack our world. The only person capable of stopping them is you, this is why the Devil himself came to you and took your powers. You're now alone, without any weaponIPProvider: DFGiwtfly: ????iwtfly26050: iwtfly2Knowledge Exchange .Net: This is my learning experience with creating an enterprise scale .NET application with tools such as Tortoise SVN, NANT, and Linq to SQLLinqPad Data Context Driver for SharePoint: The SharePoint Data Context Driver for LinqPad makes it easer for SharePoint 2010 Developers to develop, maintain and just play around with Linq To SharePoint statements via LinqPad. It is developed in C# and enables SharePoint 2010 Support to LinqPad.MaxLeafWebSiteK3: MaxLeafWebSiteK3Open ASP.NET CMS: Open ASP.NET 3.5 CMS Plug 'N Play Settings Manager: Plug 'N Play Settings Manager will be an application to configure settings on a windows computer by waiting for a usb thumbstick with a configuration file to be inserted, the application would then read and apply those settings. The early focus will be applying network settings.project windy: Windy - enhanced window manager. windy does window management a breeze. It started as a windows alternative to divvy, but now it has evolved with into its own. Thanks to the generous feedback from you folks. whats different from divvy? - first - its free. - has divvy likeRiaMVVM : MVVM Friendly WCF Ria Services: Simple, light-weight, MVVM friendly access to WCF Ria Services. Written in C# for use with Silverlight 4.SharePoint Designer 2007 Policy: Enable or Disable SharePoint Designer 2007 per site web application and per site colleciton. Spruckus - SharePoint ReUsable Content Keystamp Usage Search: Adds a keystamp to all html type items in the SharePoint Reusable Content list and adds a context item to the reusable content list that will find usages of that reusable content in your site using search.Student Insiders: Student InsidersTea: Tea Web Operator SystemVegas.NET: Projeto teste de TransportadoraXNA 4 Game state management system: XNA 4 Game State Management??????: aa

  Read the article

• Adjust timezone of an AVM Fritz!Box 7390

  It's been a while that I purchased an AVM Fritz!Box 7390 but since I'm using this 'PABX' here in Mauritius, I'm not really happy about the wrong time in the logs or handsets connected. Lately, I had some spare time to address this issue, and the following article describes how to adjust the timezone settings in general. The original idea came from an FAQ found in c't 21/11 (for a 7270 written in German language) but I added a couple of things based on other resources online. The following tutorial may be valid for other models, too. Use your common sense and think before you act. Brief introduction to AVM Fritz!Box devices The Fritz!Box series of AVM has been around for more than a decade and those little 'red boxes' have a high level of versatility for your small office or home. High-speed connections, secure WLAN and convenient telephony make a home network out of any network. Whether it's a computer, tablet or smartphone, any device can be connected to the FRITZ!Box. And best of all, installation is so simple that users will be online in a matter of minutes. If you want to have peace of your mind in your small network then a Fritz!Box is the easiest way to achieve that. I'm using my box primarly as WiFi access point, VoIP gateway and media server but only because it came in second after my Linux system. Limitations in the administrative Web UI Unfortunately, there are no possibilities to adjust the timezone settings in the Web UI at all - even not in Expert mode. I assume that this is part of the 'simplification' provided by AVM's design team. That's okay, as long as you reside in Central Europe, and the implicit time handling is correct for your location. Adjusting the timezone I got my device through an order at Amazon Germany already some time ago, and honestly I wasn't bothered too much about the pre-configured (fixed) timezone setting - CET or CEST depending on daylight saving. But you know, it's that kind of splinter at the back of your head that keeps nagging and bothering you indirectly. So, finally I sat down yesterday evening and did a quick research on how to change the timezone. Even though there are a number of results, I read the FAQ from the c't magazine first, as I consider this as a trusted and safe source of information. Of course, it is most important to avoid to 'brick' your device. You've been warned - No support Tinkering with the configuration of any AVM devices seems to be a violation of their official support channels. So, be warned and continue onlyin case that you're sure about what you are going to do. The following solutions are 'as-is' and they worked for my box flawlessly but may cause an issue in your case. Don't blame me... Solution 1 - Backup, modify and restore That's the way as described in the c't article and a couple of other forum postings I found online, mainly from Australia. Login the administrative Web UI and navigate to 'System => Einstellungen sichern' (System => Backup configuration) and store your current configuration to a local file on your machine. Despite some online postings it is not necessary to specify a password in order to secure or encrypt your backup. IMHO, this only adds another unnecessary layer of complexity to the process. Anyway, next you should create a another copy of your settings and keep it unmodified. That's our safety net to restore the current settings in case that we might have to issue a factory setting reset to the box. Now, open the configuration file with an advanced text editor which is capable to deal with Unix carriage returns properly - Windows Notepad doesn't do the job but Wordpad or Notepad++. Personally, I don't care and simply use geany, gedit or nano on Linux. In total there are 3 modifications that we have to apply to the configuration file - one new line and two adjustments. First, we have to add an instruction near the top of file that overrides the device internal checksum validation. Without this line, your settings won't be accepted. Caution: The drectives are case-sensitve and your outcome should read something like this: **** FRITZ!Box Fon WLAN 7390 CONFIGURATION EXPORTPassword=$$$$<ignore>FirmwareVersion=84.05.52CONFIG_INSTALL_TYPE=iks_16MB_xilinx_4eth_2ab_isdn_nt_te_pots_wlan_usb_host_dect_64415OEM=avmCountry=049Language=deNoChecks=yes**** CFGFILE:ar7.cfg/* * /var/flash/ar7.cfg * Mon Jul 29 10:49:18 2013 */ar7cfg {... Then search for the expression 'timezone' and you should find a section like this one (~ line 1113): timezone_manual {        enabled = no;        offset = 0;        dst_enabled = no;        TZ_string = "";        name = "";} We would like to manually handle the timezone setting in our device and therefore we have to enable it and set the proper value for Mauritius. The configuration block should like so afterwards: timezone_manual {        enabled = yes;        offset = 0;        dst_enabled = no;        TZ_string = "MUT-4";        name = "";} We specify the designation and the offset in hours of the timezone we would like to have. Caution: The offset indicates the value one has to add to the local time to arrive at UTC. More details are described in the Explanation of TZ strings. Mauritius has GMT+4 which means that we have to substract 4 hours from the local time to have UTC. Finally, we restore the modified configuration file via the administrative Web UI under 'System => Einstellungen sichern => Wiederherstellen' (System => Backup configuration => Restore). This triggers a reboot of the device, so please be patient and wait until the Web UI displays the login dialog again. Good luck! Solution 2 - Telnet A more elegant, read: technically interesting, way to adjust configuration settings in your Fritz!Box is to access it directly through Telnet. By default AVM disables that protocol channel and you have to enable it with a connected telephone. In order to activate the telnet service dial the following combination: #96*7* #96*8* (to disable telnet again after work has been completed) If you're using an AVM handset like the Fritz!Fon then you will receive a confirmation message on the display like so: telnetd ein Next, depending on your favourite operating system, you either launch a Command prompt in Windows or a terminal in Linux, get your Admin password ready, and you connect to your box like so: $ telnet fritz.box Trying 192.168.1.1...Connected to fritz.box.Escape character is '^]'.password: BusyBox v1.19.3 (2012-10-12 14:52:09 CEST) built-in shell (ash)Enter 'help' for a list of built-in commands.ermittle die aktuelle TTYtty is "/dev/pts/0"Console Ausgaben auf dieses Terminal umgelenkt# That's it, you are connected and we can continue to change the configuration manually. In order to adjust the timezone setting we have to open the ar7.cfg file. As we are now operating in a specialised environment, we only have limited capabilities at hand. One of those is a reduced version of vi - nvi. Let's open a second browser window with the fine manual page of nvi and start to edit our configuration file: # nvi /var/flash/ar7.cfg In our configuration file, we have to navigate to the timezone directives. The easiest way is to search for the expression 'timezone' by typing in the following: /timezone    (press Enter/Return) Now, we should see the exact lines of code like in the backed up version: timezone_manual {                                                                            enabled = no;                                                          offset = 0;                                                         dst_enabled = no;                                                   TZ_string = "";                                                     name = "";                                                        } And of course, we apply the same changes as described in the previous section: timezone_manual {                                                                            enabled = yes;                                                          offset = 0;                                                         dst_enabled = no;                                                   TZ_string = "MUT-4";                                                     name = "";                                                        } Finally, we have to write our changes back to the file and apply the new settings. :wq    (press Enter/Return) # ar7cfgchanged That's it! Finally, close the telnet session by pressing Ctrl+] and enter 'quit'. Additional ideas... There are a couple of more possibilities to enhance and to extend the usability of a Fritz!Box. There are lots of resources available on the net, but I'd like to name a few here. Especially for Linux users it is essential to be able to connect to any device remotely in a  safe and secure way. And the installation of a SSH server on the box would be a first step to improve this situation, also to avoid to run telnet after all. Sometimes, there might be problems in your VoIP connections, feel free to adjust the settings of codecs and connection handling, too. I guess, you'll get the idea... The only frontiers are in your mind.

  Read the article

• CodePlex Daily Summary for Thursday, November 01, 2012

  CodePlex Daily Summary for Thursday, November 01, 2012Popular ReleasesAccess 2010 Application Platform - Build Your Own Database: Application Platform - 0.0.1: Initial Release This is the first version of the database. At the moment is all contained in one file to make development easier, but the obvious idea would be to split it into Front and Back End for a production version of the tool. The features it contains at the moment are the "Core" features.Python Tools for Visual Studio: Python Tools for Visual Studio 1.5: We’re pleased to announce the release of Python Tools for Visual Studio 1.5 RTM. Python Tools for Visual Studio (PTVS) is an open-source plug-in for Visual Studio which supports programming with the Python language. PTVS supports a broad range of features including CPython/IronPython, Edit/Intellisense/Debug/Profile, Cloud, HPC, IPython, etc. support. For a quick overview of the general IDE experience, please watch this video There are a number of exciting improvement in this release comp...Devpad: 4.25: Whats new for Devpad 4.25: New Theme support New Export Wordpress Minor Bug Fix's, improvements and speed upsAssaultCube Reloaded: 2.5.5: Linux has Ubuntu 11.10 32-bit precompiled binaries and Ubuntu 10.10 64-bit precompiled binaries, but you can compile your own as it also contains the source. If you are using Mac or other operating systems, please wait while we try to package for those OSes. Try to compile it. If it fails, download a virtual machine. The server pack is ready for both Windows and Linux, but you might need to compile your own for Linux (source included) Changelog: Fixed potential bot bugs: Map change, OpenAL...Edi: Edi 1.0 with DarkExpression: Added DarkExpression theme (dialogs and message boxes are not completely themed, yet)MCEBuddy 2.x: MCEBuddy 2.3.6: Changelog for 2.3.6 (32bit and 64bit) 1. Fixed a bug in multichannel audio conversion failure. AAC does not support 6 channel audio, MCEBuddy now checks for it and force the output to 2 channel if AAC codec is specified 2. Fixed a bug in Original Broadcast Date and Time. Original Broadcast Date and Time is reported in UTC timezone in WTV metadata. TVDB and MovieDB dates are reported in network timezone. It is assumed the video is recorded and converted on the same machine, i.e. local timezone...MVVM Light Toolkit: MVVM Light Toolkit V4.1 for Visual Studio 2012: This version only supports Visual Studio 2012 (and all Express editions too). If you use Visual Studio 2010, please stay tuned, we will publish an update in a few days with support for VS10. V4.1 supports: Windows Phone 8 Windows 8 (Windows RT) Silverlight 5 Silverlight 4 WPF 4.5 WPF 4 WPF 3.5 And the following development environments: Visual Studio 2012 (Pro, Premium, Ultimate) Visual Studio 2012 Express for Windows 8 Visual Studio 2012 Express for Windows Phone 8 Visual...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.73: Fix issue in Discussion #401101 (unreferenced var in a for-in statement was getting removed). add the grouping operator to the parsed output so that unminified parsed code is closer to the original. Will still strip unneeded parens later, if minifying. more cleaning of references as they are minified out of the code.Liberty: v3.4.0.1 Release 28th October 2012: Change Log -Fixed -H4 Fixed the save verification screen showing incorrect mission and difficulty information for some saves -H4 Hopefully fixed the issue where progress did not save between missions and saves would not revert correctly -H3 Fixed crashes that occurred when trying to load player information -Proper exception dialogs will now show in place of crashesPlayer Framework by Microsoft: Player Framework for Windows 8 (Preview 7): This release is compatible with the version of the Smooth Streaming SDK released today (10/26). Release 1 of the player framework is expected to be available next week. IMPROVEMENTS & FIXESIMPORTANT: List of breaking changes from preview 6 Support for the latest smooth streaming SDK. Xaml only: Support for moving any of the UI elements outside the MediaPlayer (e.g. into the appbar). Note: Equivelent changes to the JS version due in coming week. Support for localizing all text used in t...Send multiple SMS via Way2SMS C#: SMS 1.1: Added support for 160by2Quick Launch: Quick Launch 1.0: A Lightweight and Fast Way to Manage and Launch Thousands of Tools and ApplicationsPress Win+Q and start to search and run. http://www.codeplex.com/Download?ProjectName=quicklaunch&DownloadId=523536Orchard Project: Orchard 1.6: Please read our release notes for Orchard 1.6: http://docs.orchardproject.net/Documentation/Orchard-1-6-Release-Notes Please do not post questions as reviews. Questions should be posted in the Discussions tab, where they will usually get promptly responded to. If you post a question as a review, you will pollute the rating, and you won't get an answer.Media Companion: Media Companion 3.507b: Once again, it has been some time since our release, and there have been a number changes since then. It is hoped that these changes will address some of the issues users have been experiencing, and of course, work continues! New Features: Added support for adding Home Movies. Option to sort Movies by votes. Added 'selectedBrowser' preference used when opening links in an external browser. Added option to fallback to getting runtime from the movie file if not available on IMDB. Added new Big...MSBuild Extension Pack: October 2012: Release Blog Post The MSBuild Extension Pack October 2012 release provides a collection of over 475 MSBuild tasks. A high level summary of what the tasks currently cover includes the following: System Items: Active Directory, Certificates, COM+, Console, Date and Time, Drives, Environment Variables, Event Logs, Files and Folders, FTP, GAC, Network, Performance Counters, Registry, Services, Sound Code: Assemblies, AsyncExec, CAB Files, Code Signing, DynamicExecute, File Detokenisation, GUI...NAudio: NAudio 1.6: Release notes at http://mark-dot-net.blogspot.co.uk/2012/10/naudio-16-release-notes-10th.htmlPowerShell Community Extensions: 2.1 Production: PowerShell Community Extensions 2.1 Release NotesOct 25, 2012 This version of PSCX supports both Windows PowerShell 2.0 and 3.0. See the ReleaseNotes.txt download above for more information.Umbraco CMS: Umbraco 4.9.1: Umbraco 4.9.1 is a bugfix release to fix major issues in 4.9.0 BugfixesThe full list of fixes can be found in the issue tracker's filtered results. A summary: Split buttons work again, you can now also scroll easier when the list is too long for the screen Media and Content pickers have information of the full path of the picked item Fixed: Publish status may not be accurate on nodes with large doctypes Fixed: 2 media folders and recycle bins after upgrade to 4.9 The template/code ...AcDown????? - AcDown Downloader Framework: AcDown????? v4.2.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...Rawr: Rawr 5.0.2: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...New ProjectsAsbesto: Proyecto grupo: "2ravas" para Laboratorio de Computación IV de la carrera TSP de la UTN-FRGP Realizado en C# y ASP.NET en Visual Studio 2012 y SQL Server 2012C++ Diamond printer on console without if statement: prints just a diamond with stars(*). only one important and funny feature is that it's not using 'if' statement. C++ used.CloudTest: Test cloud computing projectEnumeration of objects Class Library C#: At core level in Java I like extension of traditional enum type permiting use as the elements instances of a class. The project implements the same idea by C# with some more advanced features like a set type with boolean operators extending idea of FlagsAttributeEquation Inversion: Visual Studion 2008 Add-in for equation inversions.ESENT Serialization Class Library: ESENT Serialization class library is built above Managed ESENT. It allows you to store your objects in the underlying extensible storage engine database.ForceHttps: Very simple httpModule to ensure that all http requests are https. 1. Drop the dll into your website's bin directory 2. Update httpModules section of your web.config to reference the dll 3. Make sure your Web Server can handle SSL requests for the URL ALL http requests will be redirected as https.forrajeriaPAV2: tp pav2 asd as asd as fasfjaijiasjifoa as asf asf as afs fas asf afs fsaGoogle Analytics for WinRT: A Windows Store (WinRT) class library for tracking Google Analytics page views, events, and custom variables for your Metro style desktop and tablet apps.huanglitest10312: mvc projectiMan: iMan will be your own port manager, which help to provide the information about all the ports open in your PC It's completely developed in .NET C#InjectionCop: Facilitates secure coding through static code analysis and contract annotations in the Common Language Infrastructure.Master of Olympus: Remake of Master of Olympus : Zeus, a game developed by Impressions Games in 2000.MediaScribe: MediaScribe is a note app for your media.MouseNestDotNet: A small personal website application.Project Estimator ???????? ?? ?????????????? ?? ???????: Project Estimator ? ???????? ??????????? ? ??????????? ?? ????? ? ???????? ????.Projekt grupowy 1: Project created only for school purpose.SecondHandApp: Warenwirtschaftsprogramm für denn SecondHand LädenSimple .NET XML Serialization: .NET's XML serialization using Linq XObject classes EG: XElement in an IXmlSerializable base classStrip Converter: A Very Handy Converter for 2D Games Developers Developer Website: http://www.bluebulk.infoSwitch JS Control (Client Side): Switch JS control is a very light client side library to create switch(es) on web applications or mobile applications.VisaSys: Visa System????????: TODO::????

  Read the article

• ListView not showing up in fragment

  - by aindurti

  When I insert a listview in a fragment in my application, it doesn't show up after I populate it with items. In fact, the application crashes due to a NullPointerException. Can anybody help me? Here is the detail activity from which I show the fragments. package com.example.sample; import android.content.Intent; import android.os.Bundle; import android.support.v4.app.Fragment; import android.support.v4.app.FragmentTransaction; import android.support.v4.app.NavUtils; import android.widget.ArrayAdapter; import android.widget.ListView; import com.actionbarsherlock.app.ActionBar; import com.actionbarsherlock.app.ActionBar.Tab; import com.actionbarsherlock.app.SherlockFragmentActivity; import com.actionbarsherlock.view.MenuItem; /** * An activity representing a single Course detail screen. This activity is only * used on handset devices. On tablet-size devices, item details are presented * side-by-side with a list of items in a {@link CourseListActivity}. * <p> * This activity is mostly just a 'shell' activity containing nothing more than * a {@link CourseDetailFragment}. */ public class CourseDetailActivity extends SherlockFragmentActivity { @Override protected void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_course_detail); // Show the Up button in the action bar. ActionBar actionBar = getSupportActionBar(); actionBar.setDisplayHomeAsUpEnabled(true); actionBar.setNavigationMode(ActionBar.NAVIGATION_MODE_TABS); // initiating both tabs and set text to it. ActionBar.Tab assignTab = actionBar.newTab().setText("Assignments"); ActionBar.Tab schedTab = actionBar.newTab().setText("Schedule"); ActionBar.Tab contactTab = actionBar.newTab().setText("Contact"); // Create three fragments to display content Fragment assignFragment = new Assignments(); Fragment schedFragment = new Schedule(); Fragment contactFragment = new Contact(); assignTab.setTabListener(new MyTabsListener(assignFragment)); schedTab.setTabListener(new MyTabsListener(schedFragment)); contactTab.setTabListener(new MyTabsListener(contactFragment)); actionBar.addTab(assignTab); actionBar.addTab(schedTab); actionBar.addTab(contactTab); ListView listView = (ListView) findViewById(R.id.assignlist); String[] values = new String[] { "Android", "iPhone", "WindowsMobile", "Blackberry", "WebOS", "Ubuntu", "Windows7", "Max OS X", "Linux", "OS/2" }; // First paramenter - Context // Second parameter - Layout for the row // Third parameter - ID of the TextView to which the data is written // Forth - the Array of data ArrayAdapter<String> adapter = new ArrayAdapter<String>(this, android.R.layout.simple_list_item_1, android.R.id.text1, values); // Assign adapter to ListView listView.setAdapter(adapter); } @Override public boolean onOptionsItemSelected(MenuItem item) { switch (item.getItemId()) { case android.R.id.home: // This ID represents the Home or Up button. In the case of this // activity, the Up button is shown. Use NavUtils to allow users // to navigate up one level in the application structure. For // more details, see the Navigation pattern on Android Design: // // http://developer.android.com/design/patterns/navigation.html#up-vs-back // NavUtils.navigateUpTo(this, new Intent(this, CourseListActivity.class)); return true; } return super.onOptionsItemSelected(item); } class MyTabsListener implements ActionBar.TabListener { public Fragment fragment; public Fragment fragment2; public MyTabsListener(Fragment fragment) { this.fragment = fragment; } @Override public void onTabReselected(Tab tab, FragmentTransaction ft) { } @Override public void onTabSelected(Tab tab, FragmentTransaction ft) { ft.replace(R.id.main_across, fragment); } @Override public void onTabUnselected(Tab tab, FragmentTransaction ft) { ft.remove(fragment); } } } The fragment that I am currently trying to get working is called the Assignments fragment. As you can see in the CourseDetailActvity, I populate smaple items in the listview to see if it the listview shows up. The fragment gets inflated properly, but when I try to add items to the listview, the application crashes! Here is the logcat. 11-17 11:54:28.037: E/AndroidRuntime(282): FATAL EXCEPTION: main 11-17 11:54:28.037: E/AndroidRuntime(282): java.lang.RuntimeException: Unable to start activity ComponentInfo{com.example.sample/com.example.sample.CourseDetailActivity}: java.lang.NullPointerException 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2663) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.handleLaunchActivity(ActivityThread.java:2679) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.access$2300(ActivityThread.java:125) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread$H.handleMessage(ActivityThread.java:2033) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.os.Handler.dispatchMessage(Handler.java:99) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.os.Looper.loop(Looper.java:123) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.main(ActivityThread.java:4627) 11-17 11:54:28.037: E/AndroidRuntime(282): at java.lang.reflect.Method.invokeNative(Native Method) 11-17 11:54:28.037: E/AndroidRuntime(282): at java.lang.reflect.Method.invoke(Method.java:521) 11-17 11:54:28.037: E/AndroidRuntime(282): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:868) 11-17 11:54:28.037: E/AndroidRuntime(282): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:626) 11-17 11:54:28.037: E/AndroidRuntime(282): at dalvik.system.NativeStart.main(Native Method) 11-17 11:54:28.037: E/AndroidRuntime(282): Caused by: java.lang.NullPointerException 11-17 11:54:28.037: E/AndroidRuntime(282): at com.example.sample.CourseDetailActivity.onCreate(CourseDetailActivity.java:66) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.Instrumentation.callActivityOnCreate(Instrumentation.java:1047) 11-17 11:54:28.037: E/AndroidRuntime(282): at android.app.ActivityThread.performLaunchActivity(ActivityThread.java:2627) 11-17 11:54:28.037: E/AndroidRuntime(282): ... 11 more

  Read the article

• qemu-kvm virtual machine virtio network freeze under load

  - by Rick Koshi

  I'm having a problem with my virtual machines, where the network will freeze under heavy load. I'm using CentOS 6.2 as both host and guest, not using libvirt, just running qemu-kvm directly as follows: /usr/libexec/qemu-kvm \ -drive file=/data2/vm/rb-dev2-www1-vm.img,index=0,media=disk,cache=none,if=virtio \ -boot order=c \ -m 2G \ -smp cores=1,threads=2 \ -vga std \ -name rb-dev2-www1-vm \ -vnc :84,password \ -net nic,vlan=0,macaddr=52:54:20:00:00:54,model=virtio \ -net tap,vlan=0,ifname=tap84,script=/etc/qemu-ifup \ -monitor unix:/var/run/vm/rb-dev2-www1-vm.mon,server,nowait \ -rtc base=utc \ -device piix3-usb-uhci \ -device usb-tablet /etc/qemu-ifup (used by the above command) is a very simple script, containing the following: #!/bin/sh sudo /sbin/ifconfig $1 0.0.0.0 promisc up sudo /usr/sbin/brctl addif br0 $1 sleep 2 And here's the info on br0 and other interfaces: avl-host3 14# brctl show bridge name bridge id STP enabled interfaces br0 8000.180373f5521a no bond0 tap84 virbr0 8000.525400858961 yes virbr0-nic avl-host3 15# ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: em1: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 3: em2: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master bond0 state UP qlen 1000 link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff 4: em3: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:1e brd ff:ff:ff:ff:ff:ff 5: em4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 18:03:73:f5:52:20 brd ff:ff:ff:ff:ff:ff 6: bond0: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 7: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 18:03:73:f5:52:1a brd ff:ff:ff:ff:ff:ff inet 172.16.1.46/24 brd 172.16.1.255 scope global br0 inet6 fe80::1a03:73ff:fef5:521a/64 scope link valid_lft forever preferred_lft forever 8: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 9: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 500 link/ether 52:54:00:85:89:61 brd ff:ff:ff:ff:ff:ff 12: tap84: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 500 link/ether ba:e8:9b:2a:ff:48 brd ff:ff:ff:ff:ff:ff inet6 fe80::b8e8:9bff:fe2a:ff48/64 scope link valid_lft forever preferred_lft forever bond0 is a bond of em1 and em2. virbr0 and virbr0-nic are vestigial interfaces left over from CentOS's default installation. They are unused (as far as I know). The guest runs perfectly until I run a large 'rsync', when the network will freeze after some seemingly-random time (usually under a minute). When it freezes, there is no network activity in or out of the guest. I can still connect to the guest's console via vnc, but it is unable to speak out its network interface. Any attempt to 'ping' from the guest gives a "Destination Host Unreachable" error for 3/4 packets and no reply for every fourth packet. Sometimes (perhaps two thirds of the time), I can bring the interface back to life by doing a "service network restart" from the guest's console. If this works (and if I do it before the rsync times out), the rsync will resume. Usually it will freeze again within a minute or two. If I repeat, the rsync will eventually finish, and I presume the machine goes back to waiting for another period of heavy load. Throughout the whole process, there are no console errors or relevant (that I can see) syslog messages on either guest or host machine. If the "service network restart" doesn't work the first time, trying again (and again and again) never seems to work. The command completes normally, with normal output, but the interface stays frozen. However, a soft reboot of the guest machine (without restarting qemu-kvm) always seems to bring it back. I am aware of the "lowest mac address" assignment problem, where the bridge takes on the mac address of the slave interface with the lowest mac address. This causes temporary network freezes, but is definitely not what's happening for me. My freezes are permanent until manual intervention, and you can see from the 'ip addr show' output above that the mac address being used by br0 is that of the physical ethernet. There are no other virtual machines running on the host. I've verified that each virtual machine on the subnet has its own unique mac address. I have rebuilt the guest machine several times, and I have tried this on three different host machines (identical hardware, built identically). Oddly, I do have one virtual host (the second of this series) which never seemed to have a problem. It never had its network freeze when it was running the same rsync during its build. It's particularly odd because it was the second build. The first, on a different host, did have the freezing problem, but the second did not. I assumed at the time that I had done something wrong with the first build, and that the problem was resolved. Unfortunately, the problem reappeared when I built the third VM. Also unfortunately, I can't do many tests with the working VM, as it's now in production use, and I'm hoping I can find the cause of this issue before that machine starts having problems. It's possible that I just got really lucky while running the rsync on the working machine, and that one time it didn't freeze. Of course it's possible that I somehow changed the build scripts without realizing it and re-broke something, but I can't find any such thing. In any case, I'm hoping someone has some idea what could cause this. Addendum: Preliminary tests suggest that I don't have the problem if I substitute e1000 for virtio in the first -net flag to qemu-kvm. I don't consider this a solution, but it is suitable for a stopgap. Has anyone else had (or better yet, solved) this problem with the virtio network driver?

  Read the article

• MSTest VS2010 - DeploymentItem copying files to different locations on different machines

  - by Jack

  I have found that DeploymentItem [TestClass(), DeploymentItem(@"TestData\")] is not copying my test data files to the same location when tests are built and run on different machines. The test data files are copied to the "bin\debug" directory in the test project on my machine, but on my friend's machine they are copied to "TestResults\*name_machine YY-MM-DD HH_MM_SS*\Out". The bin\debug directory on my machine can be obtained with the code: string appDirectory = Path.GetDirectoryNameSystem.Reflection.Assembly.GetExecutingAssembly().Location; and the same code will return "TestResults\*name_machine YY-MM-DD HH_MM_SS*\Out" on my friends PC. This however isn't really the problem. The problem is that the test data files I have made have a folder structure, and this folder structure is only maintained on my machine when copied to bin\debug, whereas on my friends machine only the files are added to the "TestResults\*name_machine YY-MM-DD HH_MM_SS*\Out" directory. This means that tests will pass on my machine and fail on his! Is there a way to ensure that DeploymentItem always copys to the bin\debug folder? Or a way to ensure that the folder structure will be retained when DeploymentItem copies the files to the "TestResults\*name_machine YY-MM-DD HH_MM_SS*\Out" folder?

  Read the article

• ASP.NET websites under IIS 7.5 (Windows 7) running extremely slow

  - by emzero

  I've just installed Windows 7 x64 Ultimate on my desktop PC. I installed IIS, Visual Studio 2008, registered ASP.NET, etc. I have this ASP.NET 3.5 website I'm working on running EXTREMELY slow on this new IIS. On STA and PROD servers (Windows 2003 Server) and on my old XP/IIS 5.1 everything runs smoothly. A page which usually takes 1-2 seconds to load is taking 8 seconds!!! I saw this post on IIS forum. It says something about Vista/7 not pooling connections (just to let you know, the website is running locally but it's connecting to a SQL Server 2005 hosted on a remote server). It seems that it takes a while to "start loading" the page... I mean, I click refresh and it stays for several seconds "Waiting for localhost"... Then when it gets response it loads the whole page normally... I don't have a clue how to force Win7/IIS7.5 to pool database connections. EDIT: I've created a new empty ASP.NET web application to see if the problems happens too. The answer is no, it responds fast as it should with an empty default page. Maybe is something related to the DB connection. I will do a further test. It should be a way to fix it... EDIT 2: Debugging the app I noticed that the delay occurs AFTER the execution of .NET code (Page_Load, etc)... so the delay seems to be somewhere when IIS serves the page to the browser.

  Read the article

• Problem interfacing GSM USB modem to Java application

  - by varun

  I am working on an open-source application called FrontlineSMS which can be interfaced with GSM modems to send and receive SMS. The windows installer that is available through their website works fine. Since i wanted to modify it, I got the source code and built the jar and tried to launch it. When I plug in the GSM modem and launch the application, it sometimes detects the GSM device and i am even able to send and receive SMS. Or else 1.) I get the following error- Launching FrontlineSMS for Windows... Stable Library ========================================= Native lib Version = RXTX-2.1-7 Java lib Version = RXTX-2.1-7 Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. 2.) OR the application sometimes crashes by creating a log file which contains: # # A fatal error has been detected by the Java Runtime Environment: # # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x10009ccb, pid=4452, tid=3464 # # JRE version: 6.0_20-b02 # Java VM: Java HotSpot(TM) Client VM (16.3-b01 mixed mode, sharing windows-x86 ) # Problematic frame: # C [rxtxSerial.dll+0x9ccb] # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x03433000): JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] siginfo: ExceptionCode=0xc0000005, writing address 0x038cfa10 Registers: EAX=0x038cfa08, EBX=0x00000003, ECX=0x7c802413, EDX=0x00000001 ESP=0x070ef800, EBP=0x070ef9e8, ESI=0x3360b898, EDI=0x03433000 EIP=0x10009ccb, EFLAGS=0x00010202 Top of Stack: (sp=0x070ef800) 0x070ef800: 3360b8a0 6d9fbc40 6da2ed98 ffffffff 0x070ef810: 070ef848 6d8f0a2c 6d8f0340 070ef95c 0x070ef820: 070ef864 00000dfb 03433000 038cfa08 0x070ef830: 00000007 00000001 00000001 0000000a 0x070ef840: 03433bf4 fffffffe 070ef8f4 6d8f0b7a 0x070ef850: 070ef95c 03433bf8 6da6f210 6da6f538 0x070ef860: 070ef868 03433bf4 27f18708 27f18708 0x070ef870: 22eb9810 03433bc4 00000001 070ef898 Instructions: (pc=0x10009ccb) 0x10009cbb: 45 1c 7c 19 8b 85 44 fe ff ff 8b 95 4c fe ff ff 0x10009ccb: 89 50 08 8b 55 f4 89 d0 e9 f8 01 00 00 c7 85 50 Stack: [0x070a0000,0x070f0000], sp=0x070ef800, free space=13e070ef334k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [rxtxSerial.dll+0x9ccb] C [rxtxSerial.dll+0xa05e] j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub V [jvm.dll+0xf049c] V [jvm.dll+0x17fcf1] V [jvm.dll+0xf0667] V [jvm.dll+0xf06dd] V [jvm.dll+0x11a2a0] V [jvm.dll+0x1ddb14] V [jvm.dll+0x17f96c] C [msvcr71.dll+0x9565] C [kernel32.dll+0xb729] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) =>0x03433000 JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] 0x0344b800 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=4404, stack(0x03dd0000,0x03e20000)] 0x002b7800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3236, stack(0x008c0000,0x00910000)] 0x03f6f400 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=1888, stack(0x038e0000,0x03930000)] 0x03ec2400 JavaThread "AWT-Shutdown" [_thread_blocked, id=4300, stack(0x03740000,0x03790000)] 0x032d8c00 JavaThread "EmailServerHandler" [_thread_blocked, id=5708, stack(0x03830000,0x03880000)] 0x032f7000 JavaThread "Incoming message processor" [_thread_blocked, id=4184, stack(0x03650000,0x036a0000)] 0x03004c00 JavaThread "AWT-Windows" daemon [_thread_in_native, id=4828, stack(0x035a0000,0x035f0000)] 0x0303f400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3768, stack(0x03500000,0x03550000)] 0x02b1e800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4164, stack(0x02dd0000,0x02e20000)] 0x02b18c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2936, stack(0x02d80000,0x02dd0000)] 0x02b17400 JavaThread "Attach Listener" daemon [_thread_blocked, id=5444, stack(0x02d30000,0x02d80000)] 0x02b15c00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4976, stack(0x02ce0000,0x02d30000)] 0x02b0d800 JavaThread "Finalizer" daemon [_thread_blocked, id=5876, stack(0x02c90000,0x02ce0000)] 0x02b0c400 JavaThread "Reference Handler" daemon [_thread_blocked, id=5984, stack(0x02c40000,0x02c90000)] Other Threads: 0x02b0ac00 VMThread [stack: 0x02bf0000,0x02c40000] [id=4508] 0x02b29800 WatcherThread [stack: 0x02e20000,0x02e70000] [id=6080] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 7808K, used 4003K [0x22990000, 0x23200000, 0x27ee0000) eden space 6976K, 45% used [0x22990000, 0x22ca8e90, 0x23060000) from space 832K, 100% used [0x23060000, 0x23130000, 0x23130000) to space 832K, 0% used [0x23130000, 0x23130000, 0x23200000) tenured generation total 17208K, used 15192K [0x27ee0000, 0x28fae000, 0x32990000) the space 17208K, 88% used [0x27ee0000, 0x28db6100, 0x28db6200, 0x28fae000) compacting perm gen total 13824K, used 13655K [0x32990000, 0x33710000, 0x36990000) the space 13824K, 98% used [0x32990000, 0x336e5f98, 0x336e6000, 0x33710000) ro space 10240K, 51% used [0x36990000, 0x36ebae00, 0x36ebae00, 0x37390000) rw space 12288K, 54% used [0x37390000, 0x37a272d8, 0x37a27400, 0x37f90000) Dynamic libraries: 0x00400000 - 0x00424000 C:\WINDOWS\system32\java.exe 0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll 0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll 0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll 0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll 0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da97000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll 0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll 0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll 0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x6d000000 - 0x6d14a000 C:\Program Files\Java\jre6\bin\awt.dll 0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV 0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll 0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll 0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.dll 0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll 0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll 0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll 0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime 0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\shell32.dll 0x6d230000 - 0x6d284000 C:\Program Files\Java\jre6\bin\fontmanager.dll 0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll 0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll 0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll 0x6d610000 - 0x6d623000 C:\Program Files\Java\jre6\bin\net.dll 0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll 0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll 0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll 0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll 0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll 0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll 0x16080000 - 0x160a5000 C:\Program Files\Bonjour\mdnsNSP.dll 0x76d60000 - 0x76d79000 C:\WINDOWS\system32\Iphlpapi.dll 0x63560000 - 0x63568000 C:\Program Files\National Instruments\Shared\mDNS Responder\nimdnsNSP.dll 0x63550000 - 0x63559000 C:\WINDOWS\system32\nimdnsResponder.dll 0x78130000 - 0x781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCR80.dll 0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll 0x10000000 - 0x10012000 C:\Documents and Settings\bjz677\Desktop\client run\rxtxSerial.dll 0x73d90000 - 0x73db7000 C:\WINDOWS\system32\crtdll.dll 0x4fdd0000 - 0x4ff76000 C:\WINDOWS\system32\d3d9.dll 0x038d0000 - 0x038d6000 C:\WINDOWS\system32\d3d8thk.dll 0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll 0x6d630000 - 0x6d639000 C:\Program Files\Java\jre6\bin\nio.dll 0x03930000 - 0x03977000 C:\Program Files\Iomega\DriveIcons\IMGHOOK.DLL 0x605d0000 - 0x605d9000 C:\WINDOWS\system32\mslbui.dll 0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.DLL VM Arguments: java_command: net.frontlinesms.DesktopLauncher Launcher Type: SUN_STANDARD Environment Variables: JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20\bin CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip; PATH=C:\Program Files\Intel\MKL\10.0.2.019\ia32\bin;C:\Program Files\Intel\VTune\CGGlbCache;C:\Program Files\Intel\VTune\Analyzer\Bin;C:\Program Files\Intel\VTune\Shared\Bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;s:\datamart\bin;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\IVI\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\MATLAB\R2007b\bin;C:\Program Files\MATLAB\R2007b\bin\win32;C:\VXIPNP\WinNT\Bin;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\IA32\Lib;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\EM64T\Lib;C:\VXIPNP\WinNT\Bin\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_20\bin USERNAME=xxx OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel --------------- S Y S T E M --------------- OS: Windows XP Build 2600 Service Pack 3 CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3 Memory: 4k page, physical 2094960k(1063364k free), swap 4032536k(3038408k free) vm_info: Java HotSpot(TM) Client VM (16.3-b01) for windows-x86 JRE (1.6.0_20-b02), built on Apr 12 2010 13:52:23 by "java_re" with MS VC++ 7.1 (VS2003) time: Wed Jun 16 11:53:40 2010 elapsed time: 45 seconds Anyone knows what caused this? Please answer keeping in mind I am new to Java. Thanks, Varun

  Read the article

• iPhone: Software Development And Distribution

  - by xsl

  I have a few quick questions about the iPhone software development. I did some research about the topic, but there are a few specific things I would like to ask here, because I will have to estimate the cost of the required hardware and software, before I am allowed to buy anything. I never did any Mac development nor have I ever owned an iPhone, so needless to say this is quite hard for me. I will buy an iMac mini with 2 GB RAM for iPhone development. I will have to use it at the same time as my regular PC, but the majority of the time I won't use the Mac at all. Do I have to buy an additional monitor, a mouse and a keyboard or is there a better solution? I will have to port a C library to the iPhone platform and develop an iPhone application that uses the ported library. Do I need anything else than the iPhone SDK to do this? If I use an external library (see above), can I test the application with the integrated emulator, or is it recommend to buy the device? In a later phase of the project I will have to buy an iPhone, but I will have to wait until the iPhone 4 is released here in Europe, because the application requires a camera. In addition to this I will have to send data to a remote webservice. Aside from these two things I don't require any other features. Can I just buy the iPhone online from another country (the iPhones here are sim locked), or should I buy one with a contract? When the application is ready, it will be installed on a few iPhones owned by our customer. Because of security reasons it is crucial that there is no third party involved in this process (i.e. the application should not be distributed on the app store). Is this possible?

  Read the article

• Web application development platform recommendation

  - by TK.Maxi

  Hi all I did a year's worth of Pascal, Visual Basic and C++ 15 years ago, so suffice it to say that I'm a complete n00b & lamer when it comes to this. I really do hope that this question doesn't canned, but if it does, please be so kind as to point me in the direction of where it should be posted. I have an idea, like so many others, for a web app. I don't necessarily have the capital to outsource the development of the app right now, and I probably wouldn't want to, since non-disclosure agreements can be expensive to enforce, especially in this day and age of intercontinental outsourcing. I need the app to be usable on any mobile device (eventually), primarily on the major mobile platforms at first, on the web, (pc/mac/*ix) obviously, on mobile web browsers like opera mobile, etc. I envisage the app interacting with the major social networks like fb, orkut, msn im, twitter, et al in a way where friend's are messaged and/or wall posted, a message is posted to the users wall. Geo-location functionality is a plus, considering the service/app can be location sensitive in two ways, 1, the immediate location of the user, 2. the desired location of the user. I'd like to incorporate OpenID sign on, and the flip-side, the service will require that people (service providers) list their specialities/specialisations/interests/areas of expertise, so that matches to user requests can be made by the service, while users' requests are posted into the web universe. I've probably described a glut of apps out there, but I'd appreciate feedback on the sort of platform that I should look at using, be it hosted on something like Google's app engine, or written in android friendly code, or whatever. I'm a firm believer in herd mentality, especially at the start of a project that I have very little experience in. The more opinions, the merrier! I can't get very much more specific, since that would give the idea away. Thanks for your time and I look forward to hearing from wise and experienced and the fresh and innovative alike. Thanks

  Read the article

• Restore DB - Error RESTORE HEADERONLY is terminating abnormally.

  - by Jordon

  I have taken backup of SQL Server 2008 DB on server, and download them to local environment. I am trying to restore that database and it is keep on giving me following error. An exception occurred while executing a Transact-SQL statement or batch. (Microsoft.SqlServer.ConnectionInfo) ------------------------------ ADDITIONAL INFORMATION: The media family on device 'C:\go4sharepoint_1384_8481.bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3241) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=09.00.4053&EvtSrc=MSSQLServer&EvtID=3241&LinkId=20476 I have tried to create a temp DB on server and tried to restore the same backup file and that works. I have also tried no. of times downloading file from server to local pc using different options on Filezila (Auto, Binary) But its not working. After that I tried to execute following command on server. BACKUP DATABASE go4sharepoint_1384_8481 TO DISK=' C:\HostingSpaces\dbname_jun14_2010_new.bak' with FORMAT And it is giving me following error. Msg 3201, Level 16, State 1, Line 1 Cannot open backup device 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Backup\ C:\HostingSpaces\dbname_jun14_2010_new.bak'. Operating system error 123(The filename, directory name, or volume label syntax is incorrect.). Msg 3013, Level 16, State 1, Line 1 BACKUP DATABASE is terminating abnormally. After researching I found following 2 useful links 1) http://support.microsoft.com/kb/290787 2) http://social.msdn.microsoft.com/Forums/en-US/sqlsetupandupgrade/thread/4d5836f6-be65-47a1-ad5d-c81caaf1044f But still I can't able to restore Database correctly. Any help would be much appreciated thanks.

  Read the article

• SPP Socket createRfcommSocketToServiceRecord will not connect

  - by philDev

  Hello, I want to use Android 2.1 to connect to an external Bluetooth device, wich is offering an SPP port to me. In this case it is an external GPS unit. When I'm trying to connect I can't connect an established socket while being in the "client" mode. Then if I try to set up a socket (being in the server role), to RECEIVE text from my PC everything works just fine. The Computer can connect as the client to the Socket on the Phone via SPP using the SSP UUID or some random UUID. So the Problem is not that I'm using the wrong UUID. But the other way around (e.g. calling connect on the established client socket) createRfcommSocketToServiceRecord(UUID uuid)) just doesn't work. Sadly I don't have the time to inspect the problem further. It would be greate If somebody could point me the right way. In the following part of the Logfile has to be the Problem. Greets PhilDev P.S. I'm going to be present during the Office hours. Here the log file: 03-21 03:10:52.020: DEBUG/BluetoothSocket.cpp(4643): initSocketFromFdNative 03-21 03:10:52.025: DEBUG/BluetoothSocket(4643): connect 03-21 03:10:52.025: DEBUG/BluetoothSocket(4643): doSdp 03-21 03:10:52.050: DEBUG/ADAPTER(2132): create_device(01:00:00:7F:B5:B3) 03-21 03:10:52.050: DEBUG/ADAPTER(2132): adapter_create_device(01:00:00:7F:B5:B3) 03-21 03:10:52.055: DEBUG/DEVICE(2132): Creating device [address = 01:00:00:7F:B5:B3] /org/bluez/2132/hci0/dev_01_00_00_7F_B5_B3 [name = ] 03-21 03:10:52.055: DEBUG/DEVICE(2132): btd_device_ref(0x10c18): ref=1 03-21 03:10:52.065: INFO/BluetoothEventLoop.cpp(1914): event_filter: Received signal org.bluez.Adapter:DeviceCreated from /org/bluez/2132/hci0 03-21 03:10:52.065: INFO/BluetoothService.cpp(1914): ... Object Path = /org/bluez/2132/hci0/dev_01_00_00_7F_B5_B3 03-21 03:10:52.065: INFO/BluetoothService.cpp(1914): ... Pattern = 00001101-0000-1000-8000-00805f9b34fb, strlen = 36 03-21 03:10:52.070: DEBUG/DEVICE(2132): *************DiscoverServices******** 03-21 03:10:52.070: INFO/DTUN_HCID(2132): dtun_client_get_remote_svc_channel: starting discovery on (uuid16=0x0011) 03-21 03:10:52.070: INFO/DTUN_HCID(2132): bdaddr=01:00:00:7F:B5:B3 03-21 03:10:52.070: INFO/DTUN_CLNT(2132): Client calling DTUN_METHOD_DM_GET_REMOTE_SERVICE_CHANNEL (id 4) 03-21 03:10:52.070: INFO/(2106): DTUN_ReceiveCtrlMsg: [DTUN] Received message [BTLIF_DTUN_METHOD_CALL] 4354 03-21 03:10:52.070: INFO/(2106): handle_method_call: handle_method_call :: received DTUN_METHOD_DM_GET_REMOTE_SERVICE_CHANNEL (id 4), len 134 03-21 03:10:52.075: ERROR/BTLD(2106): ****************search UUID = 1101*********** 03-21 03:10:52.075: INFO//system/bin/btld(2103): btapp_dm_GetRemoteServiceChannel() 03-21 03:10:52.120: DEBUG/BluetoothService(1914): updateDeviceServiceChannelCache(01:00:00:7F:B5:B3) 03-21 03:10:52.120: DEBUG/BluetoothEventLoop(1914): ClassValue: null for remote device: 01:00:00:7F:B5:B3 is null 03-21 03:10:52.120: INFO/BluetoothEventLoop.cpp(1914): event_filter: Received signal org.bluez.Adapter:PropertyChanged from /org/bluez/2132/hci0 03-21 03:10:52.305: WARN/BTLD(2106): bta_dm_check_av:0 03-21 03:10:56.395: DEBUG/WifiService(1914): ACTION_BATTERY_CHANGED pluggedType: 2 03-21 03:10:57.440: WARN/BTLD(2106): SDP - Rcvd conn cnf with error: 0x4 CID 0x43 03-21 03:10:57.440: INFO/BTL-IFS(2106): send_ctrl_msg: [BTL_IFS CTRL] send BTLIF_DTUN_SIGNAL_EVT (CTRL) 13 pbytes (hdl 10) 03-21 03:10:57.445: INFO/DTUN_CLNT(2132): dtun-rx signal [DTUN_SIG_DM_RMT_SERVICE_CHANNEL] (id 42) len 15 03-21 03:10:57.445: INFO/DTUN_HCID(2132): dtun_dm_sig_rmt_service_channel: success=1, service=00000000 03-21 03:10:57.445: ERROR/DTUN_HCID(2132): discovery unsuccessful! package de.phil_dev.android.BT; import java.io.BufferedInputStream; import java.io.IOException; import java.io.InputStream; import java.io.OutputStream; import java.util.UUID; import android.app.Activity; import android.bluetooth.BluetoothAdapter; import android.bluetooth.BluetoothClass; import android.bluetooth.BluetoothDevice; import android.bluetooth.BluetoothServerSocket; import android.bluetooth.BluetoothSocket; import android.content.Intent; import android.os.Bundle; import android.util.Log; import android.widget.Toast; public class ThinBTClient extends Activity { private static final String TAG = "THINBTCLIENT"; private static final boolean D = true; private BluetoothAdapter mBluetoothAdapter = null; private BluetoothSocket btSocket = null; private BufferedInputStream inStream = null; private BluetoothServerSocket myServerSocket; private ConnectThread myConnection; private ServerThread myServer; // Well known SPP UUID (will *probably* map to // RFCOMM channel 1 (default) if not in use); // see comments in onResume(). private static final UUID MY_UUID = UUID .fromString("00001101-0000-1000-8000-00805F9B34FB"); // .fromString("94f39d29-7d6d-437d-973b-fba39e49d4ee"); // ==> hardcode your slaves MAC address here <== // PC // private static String address = "00:09:DD:50:86:A0"; // GPS private static String address = "00:0B:0D:8E:D4:33"; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); if (D) Log.e(TAG, "+++ ON CREATE +++"); mBluetoothAdapter = BluetoothAdapter.getDefaultAdapter(); if (mBluetoothAdapter == null) { Toast.makeText(this, "Bluetooth is not available.", Toast.LENGTH_LONG).show(); finish(); return; } if (!mBluetoothAdapter.isEnabled()) { Toast.makeText(this, "Please enable your BT and re-run this program.", Toast.LENGTH_LONG).show(); finish(); return; } if (D) Log.e(TAG, "+++ DONE IN ON CREATE, GOT LOCAL BT ADAPTER +++"); } @Override public void onStart() { super.onStart(); if (D) Log.e(TAG, "++ ON START ++"); } @Override public void onResume() { super.onResume(); if (D) { Log.e(TAG, "+ ON RESUME +"); Log.e(TAG, "+ ABOUT TO ATTEMPT CLIENT CONNECT +"); } // Make the phone discoverable // When this returns, it will 'know' about the server, // via it's MAC address. // mBluetoothAdapter.startDiscovery(); BluetoothDevice device = mBluetoothAdapter.getRemoteDevice(address); Log.e(TAG, device.getName() + " connected"); // myServer = new ServerThread(); // myServer.start(); myConnection = new ConnectThread(device); myConnection.start(); } @Override public void onPause() { super.onPause(); if (D) Log.e(TAG, "- ON PAUSE -"); try { btSocket.close(); } catch (IOException e2) { Log.e(TAG, "ON PAUSE: Unable to close socket.", e2); } } @Override public void onStop() { super.onStop(); if (D) Log.e(TAG, "-- ON STOP --"); } @Override public void onDestroy() { super.onDestroy(); if (D) Log.e(TAG, "--- ON DESTROY ---"); } private class ServerThread extends Thread { private final BluetoothServerSocket myServSocket; public ServerThread() { BluetoothServerSocket tmp = null; // create listening socket try { tmp = mBluetoothAdapter .listenUsingRfcommWithServiceRecord( "myServer", MY_UUID); } catch (IOException e) { Log.e(TAG, "Server establishing failed"); } myServSocket = tmp; } public void run() { Log.e(TAG, "Beginn waiting for connection"); BluetoothSocket connectSocket = null; InputStream inStream = null; byte[] buffer = new byte[1024]; int bytes; while (true) { try { connectSocket = myServSocket.accept(); } catch (IOException e) { Log.e(TAG, "Connection failed"); break; } Log.e(TAG, "ALL THE WAY AROUND"); try { connectSocket = connectSocket.getRemoteDevice() .createRfcommSocketToServiceRecord(MY_UUID); connectSocket.connect(); } catch (IOException e1) { Log.e(TAG, "DIDNT WORK"); } // handle Connection try { inStream = connectSocket.getInputStream(); while (true) { try { bytes = inStream.read(buffer); Log.e(TAG, "Received: " + buffer.toString()); } catch (IOException e3) { Log.e(TAG, "disconnected"); break; } } } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); break; } } } void cancel() { } } private class ConnectThread extends Thread { private final BluetoothSocket mySocket; private final BluetoothDevice myDevice; public ConnectThread(BluetoothDevice device) { myDevice = device; BluetoothSocket tmp = null; try { tmp = device.createRfcommSocketToServiceRecord(MY_UUID); } catch (IOException e) { Log.e(TAG, "CONNECTION IN THREAD DIDNT WORK"); } mySocket = tmp; } public void run() { Log.e(TAG, "STARTING TO CONNECT THE SOCKET"); setName("My Connection Thread"); InputStream inStream = null; boolean run = false; //mBluetoothAdapter.cancelDiscovery(); try { mySocket.connect(); run = true; } catch (IOException e) { run = false; Log.e(TAG, this.getName() + ": CONN DIDNT WORK, Try closing socket"); try { mySocket.close(); } catch (IOException e1) { Log.e(TAG, this.getName() + ": COULD CLOSE SOCKET", e1); this.destroy(); } } synchronized (ThinBTClient.this) { myConnection = null; } byte[] buffer = new byte[1024]; int bytes; // handle Connection try { inStream = mySocket.getInputStream(); while (run) { try { bytes = inStream.read(buffer); Log.e(TAG, "Received: " + buffer.toString()); } catch (IOException e3) { Log.e(TAG, "disconnected"); } } } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } // starting connected thread (handling there in and output } public void cancel() { try { mySocket.close(); } catch (IOException e) { Log.e(TAG, this.getName() + " SOCKET NOT CLOSED"); } } } }

  Read the article

• WPF combobox loses Aero theme when using a style trigger

  - by Greg R

  I am using style triggers to change combo box to texbox if it's readonly, but for some reason when I apply the style, it cause the combobox theme to change from Aero to Windows Classic (the theme I currently have in use on my PC). Can I avoid this somehow? Here is my code: <ComboBox ItemsSource="{Binding Source={StaticResource AllCountries}}" SelectedValue="{Binding OrderInfoVm.BillingCountry}" DisplayMemberPath="Value" SelectedValuePath="Key" IsReadOnly="{Binding ReadOnlyMode}" Style="{StaticResource EditableDropDown}" /> <Style x:Key="EditableDropDown" TargetType="ComboBox"> <Style.Triggers> <Trigger Property="IsReadOnly" Value="True"> <Setter Property="SelectedValuePath" Value="Content" /> <Setter Property="Template"> <Setter.Value> <ControlTemplate TargetType="ComboBox"> <TextBox Text="{TemplateBinding SelectedValue, Converter={StaticResource StringCaseConverter}}" BorderThickness="0" Background="Transparent" FontSize="{TemplateBinding FontSize}" HorizontalAlignment="{TemplateBinding HorizontalAlignment}" FontFamily="{TemplateBinding FontFamily}" Width="{TemplateBinding Width}" TextWrapping="Wrap"/> </ControlTemplate> </Setter.Value> </Setter> </Trigger> </Style.Triggers> </Style>

  Read the article

< Previous Page | 340 341 342 343 344 345 346 347 348 349 350 351  | Next Page >