Search Results

Search found 11906 results on 477 pages for 'ip restrictions'.

Page 345/477 | < Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >

• No response from example.com using Apache

  - by stevens-G

  I am unable to access example.com or by local IP after restarting the server. I checked to make sure httpd service was on. I looked at the error_log in /var/log/httpd and found nothing. Tried to restart httpd again and it says 'Ok'. I'm not sure where else to check. I did move DocumentRoot from /var/www to /web-root and it worked before restarting the server. I tried pointing it back to /var/www and still not able to view the page. IPtables have not changed. Any suggestions?

  Read the article

• Mikrotik queues and limiting total upstream bandwidth

  - by g18c

  With a Mikrotik router (form of embedded Linux) I have created simple queues per machine matched by source IP address. Each of the 4 machine queues has an unlimited burst 3Mbps/3Mbps for Tx/Rx. During speedtest.net on all 4 machines at the same time, each machine shows 3Mbps (and is limited correctly there), however the total bandwidth on the uplink goes to 12Mbps (i need to set this to 10Mbps max for the upstream). I want to restrict the actual traffic passing across the uplink port to 10Mbps regardless of what the other queues are doing (I need this catch all queue to have the final say on the uplink speed). For example I need: Scenario A Machine A transferring @ 3Mbps Machine B transferring @ 3Mbps Machine C transferring @ 3Mbps Machine D transferring @ 0Mbps Up-link speed = 9Mbps Scenario B Machine A trying to transfer @ 3Mbps Machine B trying to transfer @ 3Mbps Machine C trying to transfer @ 3Mbps Machine D trying to transfer @ 3Mbps Up-link speed = 10Mbps Actual transfer speed of machine A,B,C,D = 2.5Mbps This is to allow slight over subscription of bandwidth queues as not all will be transmitting at 3Mbps all the time. Is this possible and if so how would one go about doing this?

  Read the article

• a load balancing scenario using HAProxy and keepalived shows no performance advantage

  - by chakoshi

  Hi, I am trying to setup a load balanced web server scenario, using two HAproxy load balancers and two debian web servers following this guide http://www.howtoforge.com/setting-up-a-high-availability-load-balancer-with-haproxy-keepalived-on-debian-lenny. the setup is working but the results of simple performance benchmarking is not what I expected. I tried apache benchmark tool to send lots of requests to servers (one time directly testing one of the web servers and the other time testing through the load balancer) using the command "ab -n 1000000 -c 500 http://IP/index.html", but the test results shows better performance for the single server without load balancer. can any one tell me if I'm going wrong on some thing?

  Read the article

• nginx proxy pass redirect through load balancer

  - by Brian

  I have several backend webservers that are load-balanced using LVS. These machines have only internal non-routable IPs on them. The load-balancer is the only machine with an external IP. This setup works great. I would like to add another webserver for image serving, but it will not be part of the load-balanced pool. Is it possible to proxy pass from the load-balanced web servers to the image server and have the response redirected to the client? Client--external LB--internal web server--internal image server I've gotten proxy pass working when I remove the LB from the equation, but no luck when trying to use it.

  Read the article

• Running Multiple sites with multiple domains apache

  - by PsychoData

  I am having a rough time running apache and using multiple domain names here is a snippet of my config file. I keep getting a error saying that NameVirtualHost has no VirtualHosts. I want them both running on the same IP and I'm not sure why this doesn't work. I've been digging through the documentation for VirtualHosts, NameVirtualHost, and apache's page about name based virtual hosting. That example in the name based page is almost exactly my config! What am I doing wrong? Listen *:80 NameVirtualHost *:80 <VirtualHost *:80> ServerName www.sample1.net DocumentRoot /var/www/sample1-net </VirtualHost> <VirtualHost *:80> ServerName www.example2.net DocumentRoot /var/www/example2-net </VirtualHost>

  Read the article

• Can't access dfs namespace over vpn

  - by cpf

  Hi Serverfault, I've recently configured 2 servers in AD on the same domain level. They are physically separated and permanently connected through a site-to-site vpn for dfs replication. All well, but when users connect to either site through vpn (from home e.g.) they can't use the domain level method: \\domain.com\data Internally this works perfectly, resolving domain.com when connected through vpn gets the correct IP. I've tried Google to figure things out. What I was able to find was that more people have this issue, no real solution found though. Can anyone explain why this is happening? Especially a solution would be really helpful! Thanks in advance.

  Read the article

• Debian pure-ftpd, Restrict access

  - by durduvakis

  I am running Debian Wheezy, with ISPConfig 3, plus ModSecurity and I would like to restrict access to ftp to specific IP(s) globally (not to specific ftp users only), that can be either 127.0.0.1 or one I would manually add later. I would also like to completely disable ftp access from the web, but allow only from ftp-client software (if that is possible). The idea of closing firewall ports is not what I want. I know I can do this setting some firewall rule though, but that is not what I currently need. I have managed to do this for example on phpmyadmin inside it's .conf file, but unfortunately I cannot find any configuration to alter for pure-ftpd in my system. Restricting web-ftp access maybe possible by adding some rule in apache2 conf, but I am not sure how to write such a rule. Thanks to everyone that can help cheers

  Read the article

• Subdomain only accessible from one computer

  - by Edan Maor

  I recently added a wildcard A record to my domain (*.root.com), mapping it to a certain elastic ip on AWS. I've configured apache to redirect all references to something.root.com to root.com, except for one specific "dev" subdomain, which is hosting its own site (a Django app, specifically). The Problem: This setup works perfectly for me on my computer. But on other computers around the office, it doesn't seem to work. Specifically, trying to visit dev.root.com gives an "unable to find server" error. Pinging dev.root.com gives a "cannot resolve hostname" error. The weird thing: pinging any other subdomain of root.com does work, from all machines. I would think this was all due to DNS propagation, except all the computers are behind the same office router, so how could that be the case? Any ideas?

  Read the article

• What is the right way to use Internet Sharing in OS X?

  - by Bob King

  For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

  Read the article

• How to troubleshoot ping request time out

  - by user28317

  I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

  Read the article

• Single hardware unit to protect web servers and implement smart publishing

  - by Maxim V. Pavlov

  Thus far we've been using the combination of Forefront TMG 2010 as an edge firewall + intrusion prevention system + web site publishing mechanism in the data center to work with a few web server machines. Since we develop on ASP.NET, we are IIS and in general - Microsoft crowd. Since TMG is being deprecated, we need to come up with a hardware alternative to protect and serve our data center web cloud. Could you please advise a hardware or virtual appliance solution that can provide routing, flood prevention and smart web-site publishing (one IP - many web sites based on domain name filter) all in one. Even if it is hard to configure, as long as it covers all these features, we will invest to learn and replace TMG eventually.

  Read the article

• Setting up WAMP to run on a LAN

  - by Steve

  I've installed WAMP on a Windows 7 PC, and it is running fine locally, as localhost. I want PCs on the LAN to be able to view the local server. When they load my PC's IP address in their browser, they receive a "You don't have permission to access / on this server" error. I followed this guide, but the issue remains. To recap: I've added an inbound exception to Windows Firewall for port 80 for Private and Domain connections. I've edited Apache's httpd.conf to include: Listen 80 Listen 192.168.0.5:80 < Directory "c:/wamp/www/wordpress/" allow from all < /Directory I've edited httpd-vhosts.conf to include: < VirtualHost 192.168.0.5:80 DocumentRoot "C:/wamp/www/wordpress" < /VirtualHost Any ideas?

  Read the article

• Laptop connecting to Wifi but not to internet

  - by eddard stark

  My friends laptop is able to connect to the wifi router . Typing 192.168.1.1 in the browser shows the login page for the router . But he cannot connect to the internet. This is true on both windows and linux (dual booting setup) . There are 3 other laptops connecting to the internet via wifi just fine and his was fine too until this happened all of a sudden . I tried doing a tracert from windows to an external ip . The first hop to the modem is fine but then the packets seem to be getting dropped . If his wifi adapter is damaged how is it connecting to the modem via wifi . I havent asked a question here before but this is really weird . If anyone needs any more information I shall post it here.

  Read the article

• Why can't my networks reach each other?

  - by HOLOGRAPHICpizza

  We have two Buffalo WZR-HP-G300NH2 routers, with the default firmware, DD-WRT v24SP2-MULTI (10/31/11) std - build 17798. Each has a separate cable internet connection with a public static IP address. They are both in the 24.123.68.0/24 space. Both of them can contact pretty much the whole internet, and they can both be accessed out on the internet with no problem, but for some reason they can't talk to each other! When I try to ping one from the other I always get "Destination Host Unreachable". There are no strange routing or firewall rules in place. And they are both set to respond to pings, I can ping them from outside. Our main IT guy is going to call our ISP on Monday, but I'm impatient, so does anyone have any ideas?

  Read the article

• FTP script download from linux to windows

  - by user53864

  I'm using following FTP script on windows xp to download zip files from ubuntu cloud servers. A zip file is created every day on ubutnu servers and I will download it to windows via this ftp script. I run this script everyday manually as I have to edit the last line(mget /usr/backup_02-11-2010.Zip) of the script to match today's date. I want to edit this script so that it will download only today's zip file at the scheduled time without needing to edit it everyday, when scheduled. It's clear that date is appended to the zip files and is in the format dd-mm-yyyy. Need help... open server-ip-here username-here user-password-here lcd C:\Backup\files bin hash prompt mget /usr/backup_02-11-2010.zip

  Read the article

• Why change net.inet.tcp.tcbhashsize in FreeBSD?

  - by sh-beta

  In virtually every FreeBSD network tuning document I can find: # /boot/loader.conf net.inet.tcp.tcbhashsize=4096 This is usually paired with some unhelpful statement like "TCP control-block hash table tuning" or "Set this to a reasonable value." man 4 tcp isn't much help either: tcbhashsize Size of the TCP control-block hash table (read-only). This may be tuned using the kernel option TCBHASHSIZE or by setting net.inet.tcp.tcbhashsize in the loader(8). The only document I can find that touches on this mysterious thing is the Protocol Control Block Lookup subsection beneath Transport Layer in Optimizing the FreeBSD IP and TCP Stack, but its description is more about potential bottlenecks in using it. It seems tied to matching new TCP segments to their listening sockets, but I'm not sure how. What exactly is the TCP Control Block used for? Why would you want to set its hash size to 4096 or any other particular number?

  Read the article

• No DNS resolving with VPN (RRAS)

  - by Sven

  I have a RRAS server setup on a Windows 2003 machine with two NIC's. The VPN works like a charm, I can ping all the other computers on the network. But it fails when I try to access resources with hostnames. I searches for a solution but the ones I found are about RRAS setup with a remote DHCP server. But in my case it's the RRAS server that hands out the ip addresses (option for redirection for WINS, DNS is ON and set to the LAN NIC). I also heard something about FQDN.. but I don't really understand what that is.

  Read the article

• AWStats log format for tomcat access logs which has X-Forwarded-For

  - by Nix

  What should be the AWStats log format for below tomcat access logs ? I tried these formats but the external IP addresses are not coming into AWStats reports. LogFormat="%host %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot %referer %other %other" LogFormat="%other %other %logname %time1 %methodurl %code %bytesd %refererquot %uaquot %host_proxy" tomcat valve settings: pattern="%h %l %{USER_ID}s %t &quot;%r&quot; %s %b &quot;%{Referer}i&quot; &quot;%{User-Agent}i&quot; &quot;X-Forwarded-For=%{X-Forwarded-For}i&quot; &quot;JSESSIONID=%{JSESSIONID}c&quot; %D" Log entry: 127.0.0.1 - - [04/Nov/2013:13:39:55 +0000] "GET / HTTP/1.1" 200 12345 "https://www.google.com/url?some_url" "Mozilla/5.0 (Windows NT 6.3; WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/30.0.1599.101 Safari/537.36" "X-Forwarded-For=real_ip, proxy_server_internal_ip" "JSESSIONID=-" 12345

  Read the article

• Can we put random URL entries on DNS

  - by ring bearer

  Using microsoft DNS All/most of our local hosts ( with in ) are in following domain *.company.org So a host name will look like mymachine001.company.org Is it possible to set up wild card DNS entries of the form ? *.subd.company.com Note: The URL ends with .com, all other hosts so far ever set up in the DNS were of the format *.company.org what i am trying to achieve is the following. A user with in internal network types a url http://someprefix.subd.company.com in browser and enters. Since there is a wild card entry in DNS, the user gets routed to host mapped to *.subd.company.com in the DNS Note : at the same time, company.com has a public DNS entry and that is mapped to a physical IP in some other network (data center)

  Read the article

• RDP add domain users broken

  - by Robuust

  I have 3 servers, - domain controller with dns services - dhcp/rras - file/random server with files stored on it and nothing special so far. All servers have static IP's All servers are in the same domain (SOFTWARE) RDP is enabled for all 3 servers All servers are Windwos Server 2008 R2 I can connect to the DHCP/RRAS server via RDP I cannot connect to DC and File server When I add RPD users (both are domain admin for testing) to the File server they show up like this: What is happening what I don't see? And additional why don't I even get a login screen for RPD? Thanks in advance.

  Read the article

• Resilient Linux Mail Server Setup

  - by Coops

  How would people design a resilient mail server setup with Linux? On an application level what the system needs to provide is both an incoming and outgoing mail service (i.e. SMTP & IMAP), along with filtering and archive storage (the archive part isn't critical yet, so we'll look at this later probably). What is required on top of this is a resilient system, i.e. one which will handle individual server failures without interrupting service. As such I would term this a High Availability mail system. This is in contrast to a High Performance mail setup, as in our case the volume of mail being handled isn't the important factor, it's simply that it stays online. Having not approached this problem before, the first thing I thought of was a clustered file system (gfs/gluster/etc), combined with heartbeat to failover a floating IP to another box in the case of a server failure. Combined with postfix & dovecot does this sound feasible to people?

  Read the article

• Port Redirection on Mac OS X Lion

  - by Andreas

  I have tried to solve this issue using pf but with no luck. Basically, I am trying to redirect incoming port 443 traffic to port 22. I have tried to set up a rule in a file and load it in pf but I get syntax error. Can anyone with more experience with pf provide some insight? Here's what I've attempted: pass in on en1 proto tcp from any to any port 443 rdr-to 127.0.0.1 port 22 and pass in quick proto tcp to port 443 rdr-to 127.0.0.1 port 22 I've been able to do this in MacOSX Snow Leopard with ipfw: sudo ipfw add 1443 forward 127.0.0.1,22 ip from any to any 443 in but it doesn't work in Lion (it gives me an Invalid Argument error).

  Read the article

• One EC2 source with distributed varnish machines

  - by Elad Lachmi

  I have a web site hosted in an EC2 instance (2008 r2 + iis7.5 + sql server). I put one linux box running RHEL with varnish. After some configuration trail and error, I found a configuration that works. Now I want to duplicate the varnish boxes to other availability zones, but continue to pull the pages from the original windows box. It is my understanding that I can put the varnish boxes in different zones and pull from the windows box via it's external IP. But what do I need to do in order for each user to receive content from the box physically closest to them? Is this even possible? Thank you!

  Read the article

• Remote desktop connection drops before login can appear

  - by Keatly

  Hi Everyone, Someone asked this question a few months ago and I have the exact same problem. I have tried all of the suggested solutions in the other posting (in particular reinstalling the video card on the server), but have not had any luck. I have gone through this troubleshooting guide in detail with no results: http://theillustratednetwork.mvps.org/RemoteDesktop/RemoteDesktopSetupandTroubleshooting.html I have a client with Remote Desktop enabled that I can't connect to in our local network. When I enter in the machine ip/port in the connect box and hit Connect, it briefly gives the normal "Connecting..." dialog box. However, after 2 seconds it just drops. No error message, nothing. Just disappears as if nothing was happening. •Windows XP SP3 •Windows firewall is open for 3389TCP •Machine is on a domain •RDP is enabled in My Computer •User is a local admin I have loads of other machines on the same domain with the same GPO that work fine. Any ideas?

  Read the article

• Design Question

  - by dturner71

  Can I have two independent Connection servers attached to the same vCenter server? Here's my scenario. I'm setting up View 4 to provide desktops to two seperate Windows domains that are on different IP subnets seperated by a firewall. One cluster of physical servers, one vCenter server, linked clones. As I understand it View Connection server has to be a member of a Windows domain in order for quickprep to work. So the way to provide desktops to both Windows domains is to have a Connection server in each one right? Then open ports in the firewall so the Connection server from the other subnet can communicate with vCenter. Any reason why this won't work? Or is there a better way to accomplish it?

  Read the article

< Previous Page | 341 342 343 344 345 346 347 348 349 350 351 352  | Next Page >