Search Results

Search found 9365 results on 375 pages for '13 04'.

Page 346/375 | < Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >

• LDAP over SSL with an EFI Fiery printer

  - by austinian

  I've got a printer with a Fiery running 8e Release 2. I can authenticate users against AD using the LDAP configuration, but I can only get it to work if I don't use SSL/TLS, and only if I use SIMPLE authentication. Right now, it's authenticating using a fairly low-impact user, but it's also the only system on our network that's not using LDAPS. I can get AD info fine over LDAPS using ldp.exe from my machine, our firewall, our mail filter, our linux boxes, etc. The only problem child is the Fiery. I've added the LDAP server certificate as a trusted cert to the Fiery, but after I check the box for Secure Communication and change the port to 636, pressing Validate results in a dialog box coming up saying: LDAP Validation Failed Server Name invalid or server is unavailable. I've tried changing the server name to use just the name, the FQDN, and the IP address, and changed it to another server, just to see if it was just this AD server that was fussy with the Fiery. EDIT: removed LDP output, added packet capture analysis from wireshark: The conversation seems pretty normal to me, up to the point where the Fiery terminates the connection after the server sends back a handshake response. Maybe they messed up their TLS implementation? I'm trying support, but it's been fairly useless so far. The cert is a SHA-2 (sha256RSA) 2048-bit certificate. Also, it looks like the Fiery is specifying TLS 1.0. Looking at http://msdn.microsoft.com/en-us/library/windows/desktop/aa374757(v=vs.85).aspx, I'm not seeing SHA256 and TLS 1.0 combination being supported by SChannel. headdesk perhaps that's why, after the DC changes the cipher spec, the connection is terminated by the Fiery? TLS 1.1 and 1.2 are enabled on the DC. Wireshark conversation: DC: 172.17.2.22, Fiery: 172.17.2.42 No. Time Source Source Port Destination Destination Port Protocol Length Info 1 0.000000000 172.17.2.42 48633 172.17.2.22 ldaps TCP 74 48633 > ldaps [SYN] Seq=0 Win=5840 Len=0 MSS=1460 SACK_PERM=1 TSval=3101761 TSecr=0 WS=4 2 0.000182000 Dell_5e:94:e3 Broadcast ARP 60 Who has 172.17.2.42? Tell 172.17.2.22 3 0.000369000 TyanComp_c9:0f:90 Dell_5e:94:e3 ARP 60 172.17.2.42 is at 00:e0:81:c9:0f:90 4 0.000370000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 74 ldaps > 48633 [SYN, ACK] Seq=0 Ack=1 Win=8192 Len=0 MSS=1460 WS=256 SACK_PERM=1 TSval=67970573 TSecr=3101761 5 0.000548000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=1 Ack=1 Win=5840 Len=0 TSval=3101761 TSecr=67970573 6 0.001000000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 147 Client Hello 7 0.001326000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 8 0.001513000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 9 0.001515000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=1449 Win=8736 Len=0 TSval=3101761 TSecr=67970573 10 0.001516000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=2897 Win=11632 Len=0 TSval=3101761 TSecr=67970573 11 0.001732000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 1514 [TCP segment of a reassembled PDU] 12 0.001737000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 1243 Server Hello, Certificate, Certificate Request, Server Hello Done 13 0.001738000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=4345 Win=14528 Len=0 TSval=3101761 TSecr=67970573 14 0.001739000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [ACK] Seq=82 Ack=5522 Win=17424 Len=0 TSval=3101761 TSecr=67970573 15 0.002906000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 78 Certificate 16 0.004155000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 333 Client Key Exchange 17 0.004338000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=361 Win=66304 Len=0 TSval=67970573 TSecr=3101762 18 0.004338000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 72 Change Cipher Spec 19 0.005481000 172.17.2.42 48633 172.17.2.22 ldaps TLSv1 327 Encrypted Handshake Message 20 0.005645000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5522 Ack=628 Win=66048 Len=0 TSval=67970574 TSecr=3101762 21 0.010247000 172.17.2.22 ldaps 172.17.2.42 48633 TLSv1 125 Change Cipher Spec, Encrypted Handshake Message 22 0.016451000 172.17.2.42 48633 172.17.2.22 ldaps TCP 66 48633 > ldaps [FIN, ACK] Seq=628 Ack=5581 Win=17424 Len=0 TSval=3101765 TSecr=67970574 23 0.016630000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 66 ldaps > 48633 [ACK] Seq=5581 Ack=629 Win=66048 Len=0 TSval=67970575 TSecr=3101765 24 0.016811000 172.17.2.22 ldaps 172.17.2.42 48633 TCP 60 ldaps > 48633 [RST, ACK] Seq=5581 Ack=629 Win=0 Len=0

  Read the article

• Query doesn't use a covering-index when applicable

  - by Dor

  I've downloaded the employees database and executed some queries for benchmarking purposes. Then I noticed that one query didn't use a covering index, although there was a corresponding index that I created earlier. Only when I added a FORCE INDEX clause to the query, it used a covering index. I've uploaded two files, one is the executed SQL queries and the other is the results. Can you tell why the query uses a covering-index only when a FORCE INDEX clause is added? The EXPLAIN shows that in both cases, the index dept_no_from_date_idx is being used anyway. To adapt myself to the standards of SO, I'm also writing the content of the two files here: The SQL queries: USE employees; /* Creating an index for an index-covered query */ CREATE INDEX dept_no_from_date_idx ON dept_emp (dept_no, from_date); /* Show `dept_emp` table structure, indexes and generic data */ SHOW TABLE STATUS LIKE "dept_emp"; DESCRIBE dept_emp; SHOW KEYS IN dept_emp; /* The EXPLAIN shows that the subquery doesn't use a covering-index */ EXPLAIN SELECT SQL_NO_CACHE * FROM dept_emp INNER JOIN ( /* The subquery should use a covering index, but isn't */ SELECT SQL_NO_CACHE emp_no, dept_no FROM dept_emp WHERE dept_no="d001" ORDER BY from_date DESC LIMIT 20000,50 ) AS `der` USING (`emp_no`, `dept_no`); /* The EXPLAIN shows that the subquery DOES use a covering-index, thanks to the FORCE INDEX clause */ EXPLAIN SELECT SQL_NO_CACHE * FROM dept_emp INNER JOIN ( /* The subquery use a covering index */ SELECT SQL_NO_CACHE emp_no, dept_no FROM dept_emp FORCE INDEX(dept_no_from_date_idx) WHERE dept_no="d001" ORDER BY from_date DESC LIMIT 20000,50 ) AS `der` USING (`emp_no`, `dept_no`); The results: -------------- /* Creating an index for an index-covered query */ CREATE INDEX dept_no_from_date_idx ON dept_emp (dept_no, from_date) -------------- Query OK, 331603 rows affected (33.95 sec) Records: 331603 Duplicates: 0 Warnings: 0 -------------- /* Show `dept_emp` table structure, indexes and generic data */ SHOW TABLE STATUS LIKE "dept_emp" -------------- +----------+--------+---------+------------+--------+----------------+-------------+-----------------+--------------+-----------+----------------+---------------------+-------------+------------+-----------------+----------+----------------+---------+ | Name | Engine | Version | Row_format | Rows | Avg_row_length | Data_length | Max_data_length | Index_length | Data_free | Auto_increment | Create_time | Update_time | Check_time | Collation | Checksum | Create_options | Comment | +----------+--------+---------+------------+--------+----------------+-------------+-----------------+--------------+-----------+----------------+---------------------+-------------+------------+-----------------+----------+----------------+---------+ | dept_emp | InnoDB | 10 | Compact | 331883 | 36 | 12075008 | 0 | 21544960 | 29360128 | NULL | 2010-05-04 13:07:49 | NULL | NULL | utf8_general_ci | NULL | | | +----------+--------+---------+------------+--------+----------------+-------------+-----------------+--------------+-----------+----------------+---------------------+-------------+------------+-----------------+----------+----------------+---------+ 1 row in set (0.47 sec) -------------- DESCRIBE dept_emp -------------- +-----------+---------+------+-----+---------+-------+ | Field | Type | Null | Key | Default | Extra | +-----------+---------+------+-----+---------+-------+ | emp_no | int(11) | NO | PRI | NULL | | | dept_no | char(4) | NO | PRI | NULL | | | from_date | date | NO | | NULL | | | to_date | date | NO | | NULL | | +-----------+---------+------+-----+---------+-------+ 4 rows in set (0.05 sec) -------------- SHOW KEYS IN dept_emp -------------- +----------+------------+-----------------------+--------------+-------------+-----------+-------------+----------+--------+------+------------+---------+ | Table | Non_unique | Key_name | Seq_in_index | Column_name | Collation | Cardinality | Sub_part | Packed | Null | Index_type | Comment | +----------+------------+-----------------------+--------------+-------------+-----------+-------------+----------+--------+------+------------+---------+ | dept_emp | 0 | PRIMARY | 1 | emp_no | A | 331883 | NULL | NULL | | BTREE | | | dept_emp | 0 | PRIMARY | 2 | dept_no | A | 331883 | NULL | NULL | | BTREE | | | dept_emp | 1 | emp_no | 1 | emp_no | A | 331883 | NULL | NULL | | BTREE | | | dept_emp | 1 | dept_no | 1 | dept_no | A | 7 | NULL | NULL | | BTREE | | | dept_emp | 1 | dept_no_from_date_idx | 1 | dept_no | A | 13 | NULL | NULL | | BTREE | | | dept_emp | 1 | dept_no_from_date_idx | 2 | from_date | A | 165941 | NULL | NULL | | BTREE | | +----------+------------+-----------------------+--------------+-------------+-----------+-------------+----------+--------+------+------------+---------+ 6 rows in set (0.23 sec) -------------- /* The EXPLAIN shows that the subquery doesn't use a covering-index */ EXPLAIN SELECT SQL_NO_CACHE * FROM dept_emp INNER JOIN ( /* The subquery should use a covering index, but isn't */ SELECT SQL_NO_CACHE emp_no, dept_no FROM dept_emp WHERE dept_no="d001" ORDER BY from_date DESC LIMIT 20000,50 ) AS `der` USING (`emp_no`, `dept_no`) -------------- +----+-------------+------------+--------+----------------------------------------------+-----------------------+---------+------------------------+-------+-------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+------------+--------+----------------------------------------------+-----------------------+---------+------------------------+-------+-------------+ | 1 | PRIMARY | <derived2> | ALL | NULL | NULL | NULL | NULL | 50 | | | 1 | PRIMARY | dept_emp | eq_ref | PRIMARY,emp_no,dept_no,dept_no_from_date_idx | PRIMARY | 16 | der.emp_no,der.dept_no | 1 | | | 2 | DERIVED | dept_emp | ref | dept_no,dept_no_from_date_idx | dept_no_from_date_idx | 12 | | 21402 | Using where | +----+-------------+------------+--------+----------------------------------------------+-----------------------+---------+------------------------+-------+-------------+ 3 rows in set (0.09 sec) -------------- /* The EXPLAIN shows that the subquery DOES use a covering-index, thanks to the FORCE INDEX clause */ EXPLAIN SELECT SQL_NO_CACHE * FROM dept_emp INNER JOIN ( /* The subquery use a covering index */ SELECT SQL_NO_CACHE emp_no, dept_no FROM dept_emp FORCE INDEX(dept_no_from_date_idx) WHERE dept_no="d001" ORDER BY from_date DESC LIMIT 20000,50 ) AS `der` USING (`emp_no`, `dept_no`) -------------- +----+-------------+------------+--------+----------------------------------------------+-----------------------+---------+------------------------+-------+--------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+-------------+------------+--------+----------------------------------------------+-----------------------+---------+------------------------+-------+--------------------------+ | 1 | PRIMARY | <derived2> | ALL | NULL | NULL | NULL | NULL | 50 | | | 1 | PRIMARY | dept_emp | eq_ref | PRIMARY,emp_no,dept_no,dept_no_from_date_idx | PRIMARY | 16 | der.emp_no,der.dept_no | 1 | | | 2 | DERIVED | dept_emp | ref | dept_no_from_date_idx | dept_no_from_date_idx | 12 | | 37468 | Using where; Using index | +----+-------------+------------+--------+----------------------------------------------+-----------------------+---------+------------------------+-------+--------------------------+ 3 rows in set (0.05 sec) Bye

  Read the article

• using return values from a c# .net made component build as com+

  - by YvesR

  Hello, so far I made a component in C# .NET 4 and use System.EnterpriseServices to make it COM visible. I want to develop business methods in C#, but I still need to access them from classic ASP (vbscript). So far so good, everything works fine (exept function overloading :)). Now I made a test class to get more expirience with return code. using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.EnterpriseServices; using System.Management; namespace iController { /// /// The tools class provides additional functions for general use in out of context to other classes of the iController. /// public class tools :ServicedComponent { #region publich methods public bool TestBoolean() { return true; } public string TestString() { return "this is a string"; } public int TestInteger() { return 32; } public double TestDouble() { return 32.32; } public float TestFloat() { float ret = 2 ^ 16; return ret; } public string[] TestArray() { string[] ret = {"0","1"}; return ret; } public int[][] TestJaggedArray() { int[][] jaggedArray = new int[3][]; jaggedArray[0] = new int[] { 1, 3, 5, 7, 9 }; jaggedArray[1] = new int[] { 0, 2, 4, 6 }; jaggedArray[2] = new int[] { 11, 22 }; return jaggedArray; } public Dictionary<string, string> TestDictionary() { Dictionary<string, string> ret = new Dictionary<string,string>(); ret.Add("test1","val1"); ret.Add("test2","val2"); return ret; } #endregion } } Then I just made a simple vbscript file to run it with cscript.exe for testing porpuse. Dim oTools : Set oTools = CreateObject("iController.tools") WScript.StdOut.WriteLine TypeName(oTools.TestBoolean()) & " - " & oTools.TestBoolean() WScript.StdOut.WriteLine TypeName(oTools.TestString()) & " - " & oTools.TestString() WScript.StdOut.WriteLine TypeName(oTools.TestInteger()) & " - " & oTools.TestInteger() WScript.StdOut.WriteLine TypeName(oTools.TestDouble()) & " - " & oTools.TestDouble() WScript.StdOut.WriteLine TypeName(oTools.TestFloat()) & " - " & oTools.TestFloat() test = oTools.TestArray() WScript.StdOut.WriteLine TypeName(test) WScript.StdOut.WriteLine UBound(test) For i = 0 To UBound(test) WScript.StdOut.WriteLine test(i) Next For Each item IN test WScript.StdOut.WriteLine item Next test = oTools.TestJaggedArray() WScript.StdOut.WriteLine TypeName(test) For Each item IN test WScript.StdOut.WriteLine test & " - " & test.Item(item) Next test = oTools.TestDictionary() WScript.StdOut.WriteLine TypeName(test) For Each item IN test WScript.StdOut.WriteLine test & " - " & test.Item(item) Next What works fine: string, int, foat, double When it comes to array, jaggedarray or dictionaries I get a type mismatch. VarType is 13 object for the dictionary e.g. but this dict seems to be different then the Scripting.Dictionary. I checked codeproject.com and stackoverflow all day and didn't find any hints exept some thread on stackoverflow where someone mentioned there is a need to created a IDispatch interface. So anyone ever had the same issue and can help me or give me some hints I can go on with?

  Read the article

• IE adding a attribute 'done[number]' ??

  - by Phil Jackson

  Hi all im struggling to find an answer to my problem here. I've made a IM application the same as facebooks but it is having problems in IE. The problem started as I kept seeing rn at the beginnning of every post made via IE. That was due to stripslashes function. But as I was investigating I noticed my tag was being added an attribut 'done'; <li><UL done67="7">rn<LI class=name>ACTwebDesigns</LI>rn<LI class=speech>hello</LI></UL></li> <li><UL done1="4">rn<LI class=name>ACTwebDesigns</LI>rn<LI class=speech>foo</LI></UL></li> <li><UL done84="10">rn<LI class=name>ACTwebDesigns</LI>rn<LI class=speech>barr</LI>rn<LI class=speech ?>foobar</LI></UL></li> <li><UL done88="14">rn<LI class=name>ACTwebDesigns</LI>rn<LI class=speech>this is a test</LI></UL></li> does anyone know of a reason why IE would add this attribute? EDIT: function checkForm() { $(".chat_input").keydown(function(e){ if ( e.keyCode == 13 ) { var data = strip_tags($(this).val()); var username = $("#users_username").val(); var box = $(this).parents('div:eq(0)'); $(this).val(""); if( box.find('.conversation_box li.' + session_number ).length == 0 ) { var conversation_list = box.find('.conversation_box').html(); var insert_data = '<li class="' + session_number + '"><ul><li class="name">' + username + '</li><li class="speech">' + data + '</li></ul></li>'; box.find('.conversation_box').html(conversation_list + insert_data); bottom(); }else{ var conversation_list = box.find('.conversation_box li.' + session_number + ' ul').html(); var insert_data = '<li class="speech"">' + data + '</li>'; box.find('.conversation_box li.' + session_number + ' ul').html(conversation_list + insert_data); bottom(); } return false; } }); } function store_chat(){ try{ var token = $("#token").val(); var openedBoxes = $("li.conversation_list"); openedBoxes.each(function(){ var boxContainer = $(this).parents('div:eq(0)'); var amount = boxContainer.find('.conversation_box li').length; var p = boxContainer.find('.open_trigger').html(); var u = $("#users_username").val(); if( amount != 0 ){ if( $(this).parents('div:eq(0)').find('.conversation_box li.' + session_number ).length != 0 ) { var session_contents = $(this).parents('div:eq(0)').find('.conversation_box li.' + session_number ).html(); alert( session_contents ); $.ajax({ type: 'POST', url: './', data: 'token=' + token + '&re=7&s=' + amount + '&sd=' + session_contents + '&u=' + u + '&p=' + p, cache: false, timeout: 5000, success: function(html){ auth(html); boxContainer.find('.conversation_box').html(html); bottom(); } }); } } }); }catch(er){} }

  Read the article

• Fonts, goes back to default size

  - by Bladimir Ruiz

  Every time I change the font, it goes back to the default size, which is 12, even if I change it before with the "Tamano" menu, it only goes back to 12 every time, my guess would be the way I change the size with deriveFont(), but don't I now any other way to change it. public static class cambiar extends JFrame { public cambiar() { final Font aryal = new Font("Comic Sans MS", Font.PLAIN, 12); JFrame ventana = new JFrame("Cambios en el Texto!"); JPanel adentro = new JPanel(); final JLabel texto = new JLabel("Texto a Cambiar!"); texto.setFont(aryal); JMenuBar menu = new JMenuBar(); JMenu fuentes = new JMenu("Fuentes"); /* Elementos de Fuentes */ JMenuItem arial = new JMenuItem("Arial"); arial.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { Font arrrial = new Font("Arial", Font.PLAIN, 12); float tam = (float) texto.getFont().getSize(); String hola = String.valueOf(tam); texto.setFont(arrrial); texto.setFont(texto.getFont().deriveFont(tam)); } }); fuentes.add(arial); /* FIN Fuentes */ JMenu tamano = new JMenu("Tamano"); /* Elementos de Tamano */ JMenuItem font13 = new JMenuItem("13"); font13.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { texto.setFont(texto.getFont().deriveFont(23.0f)); } }); JMenuItem font14 = new JMenuItem("14"); arial.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { texto.setFont(aryal); } }); JMenuItem font15 = new JMenuItem("15"); arial.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { texto.setFont(aryal); } }); JMenuItem font16 = new JMenuItem("16"); arial.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { texto.setFont(aryal); } }); JMenuItem font17 = new JMenuItem("17"); arial.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { texto.setFont(aryal); } }); JMenuItem font18 = new JMenuItem("18"); arial.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { texto.setFont(aryal); } }); JMenuItem font19 = new JMenuItem("19"); arial.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { texto.setFont(aryal); } }); JMenuItem font20 = new JMenuItem("20"); arial.addActionListener(new ActionListener() { public void actionPerformed(ActionEvent e) { texto.setFont(aryal); } }); tamano.add(font13); /* FIN tanano */ JMenu tipo = new JMenu("Tipo"); /* Elementos de tipo */ /* FIN tipo */ /* Elementos del JMENU */ menu.add(fuentes); menu.add(tamano); menu.add(tipo); /* FIN JMENU */ /* Elementos del JPanel */ adentro.add(menu); adentro.add(texto); /* FIN JPanel */ /* Elementos del JFRAME */ ventana.add(adentro); ventana.setVisible(true); ventana.setSize(250, 250); /* FIN JFRAME */ } } Thanks in Advance!

  Read the article

• Smart auto detect and replace URLs with anchor tags

  - by Robert Koritnik

  I've written a regular expression that automatically detects URLs in free text that users enter. This is not such a simple task as it may seem at first. Jeff Atwood writes about it in his post. His regular expression works, but needs extra code after detection is done. I've managed to write a regular expression that does everything in a single go. This is how it looks like (I've broken it down into separate lines to make it more understandable what it does): 1 (?<outer>\()? 2 (?<scheme>http(?<secure>s)?://)? 3 (?<url> 4 (?(scheme) 5 (?:www\.)? 6 | 7 www\. 8 ) 9 [a-z0-9] 10 (?(outer) 11 [-a-z0-9/+&@#/%?=~_()|!:,.;cšžcd]+(?=\)) 12 | 13 [-a-z0-9/+&@#/%?=~_()|!:,.;cšžcd]+ 14 ) 15 ) 16 (?<ending>(?(outer)\))) As you may see, I'm using named capture groups (used later in Regex.Replace()) and I've also included some local characters (cšžcd), that allow our localised URL to be parsed as well. You can easily omit them if you'd like. Anyway. Here's what it does (referring to line numbers): 1 - detects if URL starts with open braces (is contained inside braces) and stores it in "outer" named capture group 2 - checks if it starts with URL scheme also detecting whether scheme is SSL or not 3 - starts parsing URL itself (will store it in "url" named capture group) 4-8 - if statement that says: if "sheme" was present then www. part is optional, otherwise mandatory for a string to be a link (so this regular expression detects all strings that start with either http or www) 9 - first character after http:// or www. should be either a letter or a number (this can be extended if you would like to cover even more links, but I've decided to omit other characters because I can't remember a link that would start with some other character 10-14 - if statement that says: if "outer" (braces) was present capture everything up to the last closing braces otherwise capture all 15 - closes the named capture group for URL 16 - if open braces was present, capture closing braces as well and store it in "ending" named capture group First and last line used to have \s* in them as well, so user could also write open braces and put a space inside before pasting link. Anyway. My code that does link replacement with actual anchor HTML elements looks exactly like this: value = Regex.Replace( value, @"(?<outer>\()?(?<scheme>http(?<secure>s)?://)?(?<url>(?(scheme)(?:www\.)?|www\.)[a-z0-9](?(outer)[-a-z0-9/+&@#/%?=~_()|!:,.;cšžcd]+(?=\))|[-a-z0-9/+&@#/%?=~_()|!:,.;cšžcd]+))(?<ending>(?(outer)\)))", "${outer}<a href=\"http${secure}://${url}\">http${secure}://${url}</a>${ending}", RegexOptions.Compiled | RegexOptions.CultureInvariant | RegexOptions.IgnoreCase); As you can see I'm using named capture groups to replace link with an Anchor tag: ${outer}<a href=\"http${secure}://${url}\">http${secure}://${url}</a>${ending} I could as well omit the http(s) part in anchor display to make links look friendlier, but for now I decided not to. Question I would like for my links to be replaced with shortenings as well. So when user copies a very long links (for instance if they would copy a link from google maps that usually generates long links I would like to shorten the visible part of the anchor tag. Link would work, but visible part of an anchor tag would be shortened to some number of characters. Does the replace string support notations like that so I can stil use a singe Regex.Replace() call?

  Read the article

• Connection drops while transferring large files to one server on a network

  - by Charlotte

  My company has two sites, each with their own LAN, using site to site VPN tunnel to connect the two sites. When transferring files (especially larger files) from site1 to site2 server1, the file transfer fails. I don't think this can be a VPN issue because transferring the same files to site2 server2 which is on the same network as server1 works fine. Pings to server1 and server2 at site2 from site1 are about the same, mostly 19/20ms with the odd one up to 50ms. As server1 is DB server with a high load I thought the NIC maybe overloaded, but a transfer from site2 server1 to site2 server2 works fine, and that uses the same NIC on server1 as transfers from site1 to site2 server1. The servers are both Windows Server 2003 VMs with VMXNET 3 NICs. Site2 Server1 route print: IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 28 9b ...... vmxnet3 Ethernet Adapter #2 0x10004 ...00 50 56 99 18 97 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.18 10 10.10.10.0 255.255.255.0 10.10.10.70 10.10.10.70 10 10.10.10.70 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.18 172.20.10.18 10 172.20.10.18 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.18 172.20.10.18 10 224.0.0.0 240.0.0.0 10.10.10.70 10.10.10.70 10 224.0.0.0 240.0.0.0 172.20.10.18 172.20.10.18 10 255.255.255.255 255.255.255.255 10.10.10.70 10.10.10.70 1 255.255.255.255 255.255.255.255 172.20.10.18 172.20.10.18 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site2 Server2 route print IPv4 Route Table =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x10003 ...00 50 56 99 15 00 ...... vmxnet3 Ethernet Adapter =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 172.20.10.1 172.20.10.114 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 172.20.10.0 255.255.255.0 172.20.10.114 172.20.10.114 10 172.20.10.114 255.255.255.255 127.0.0.1 127.0.0.1 10 172.20.255.255 255.255.255.255 172.20.10.114 172.20.10.114 10 224.0.0.0 240.0.0.0 172.20.10.114 172.20.10.114 10 255.255.255.255 255.255.255.255 172.20.10.114 172.20.10.114 1 Default Gateway: 172.20.10.1 =========================================================================== Persistent Routes: None Site1 Server route print: =========================================================================== Interface List 14...00 50 56 93 00 0b ......vmxnet3 Ethernet Adapter #2 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.168.1 192.168.168.118 261 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.168.0 255.255.255.0 On-link 192.168.168.118 261 192.168.168.118 255.255.255.255 On-link 192.168.168.118 261 192.168.168.255 255.255.255.255 On-link 192.168.168.118 261 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.168.118 261 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.168.118 261 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 192.168.168.1 Default =========================================================================== IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 14 261 fe80::/64 On-link 14 261 fe80::3c6b:996f:ef36:ee76/128 On-link 1 306 ff00::/8 On-link 14 261 ff00::/8 On-link =========================================================================== Persistent Routes: None tracert from site1 to site2 server1: Tracing route to server1 [172.20.10.18] over a maximum of 30 hops: 1 19 ms 19 ms 19 ms server1 [172.20.10.18] Trace complete. tracert from site2 server1 to site1: When this was run it went to the external IP of site2, then to a couple of external ips of the isp, then times out. Can anyone suggest any troubleshooting steps? Thanks, Charlotte.

  Read the article

• How to run node.js app on port 80? Are processes blocking my port?

  - by Lucas

  I believe the port 80 on my remote instance is blocked, and I am trying to run a node.js app using port 80. I have experimented with ports 3000 and 3002, and both ports are working fine, but I get an error when running on port 80. I suspect port 80 is blocked from my output of netstat -an below, but how can I find the process id's of the addresses that are blocking port 80 below? [lucas@ecoinstance]~/node/nodetest1$ netstat -an Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:3002 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:27017 127.0.0.1:51108 ESTABLISHED tcp 0 0 127.0.0.1:51106 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51106 ESTABLISHED tcp 0 0 127.0.0.1:51107 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:3002 174.61.171.61:36583 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51109 ESTABLISHED tcp 0 0 10.240.241.116:42423 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51108 127.0.0.1:27017 ESTABLISHED tcp 0 532 10.240.241.116:22 174.61.171.61:56824 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51107 ESTABLISHED tcp 0 0 10.240.241.116:42412 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51109 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:51105 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:42422 169.254.169.254:80 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51105 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN udp 0 0 0.0.0.0:49948 0.0.0.0:* udp 0 0 0.0.0.0:68 0.0.0.0:* udp 0 0 10.240.241.116:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp6 0 0 :::12151 :::* udp6 0 0 :::123 :::* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 405680 /tmp/ssh-KdkxJfFLpKTC/agent.22 813 unix 2 [ ACC ] STREAM LISTENING 408230 /tmp/ssh-ofUeNNEwAqtP/agent.22 243 unix 2 [ ACC ] STREAM LISTENING 416227 /tmp/mongodb-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 /run/udev/control unix 7 [ ] DGRAM 5286 /dev/log unix 2 [ ACC ] STREAM LISTENING 5318 /var/run/acpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 /tmp//tmux-1000/default unix 2 [ ACC ] STREAM LISTENING 414450 /var/run/dbus/system_bus_socke And here is the log when trying to run on port 80 with node.js: [lucas@ecoinstance]~/node/nodetest1$ npm start > [email protected] start /home/lucas/node/nodetest1 > node ./bin/www events.js:72 throw er; // Unhandled 'error' event ^ Error: listen EACCES at errnoException (net.js:904:11) at Server._listen2 (net.js:1023:19) at listen (net.js:1064:10) at Server.listen (net.js:1138:5) at Function.app.listen (/home/lucas/node/nodetest1/node_modules/express/lib/applicati on.js:532:24) at Object.<anonymous> (/home/lucas/node/nodetest1/bin/www:7:18) at Module._compile (module.js:456:26) at Object.Module._extensions..js (module.js:474:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) npm ERR! [email protected] start: `node ./bin/www` npm ERR! Exit status 8 npm ERR! npm ERR! Failed at the [email protected] start script. npm ERR! This is most likely a problem with the nodetest1 package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./bin/www npm ERR! You can get their info via: npm ERR! npm owner ls nodetest1 npm ERR! There is likely additional logging output above. npm ERR! System Linux 3.13-0.bpo.1-amd64 npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "start" npm ERR! cwd /home/lucas/node/nodetest1 npm ERR! node -v v0.10.28 npm ERR! npm -v 1.4.9 npm ERR! code ELIFECYCLE npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/lucas/node/nodetest1/npm-debug.log npm ERR! not ok code 0 And sudo netstat -lnp does not return any matching port 80's: [lucas@ecoinstance]~/node/nodetest1$ sudo netstat -lnp [48/648] Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Progr am name tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 29160/mon god tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1976/sshd tcp6 0 0 :::22 :::* LISTEN 1976/sshd udp 0 0 0.0.0.0:49948 0.0.0.0:* 1604/dhcl ient udp 0 0 0.0.0.0:68 0.0.0.0:* 1604/dhcl ient udp 0 0 10.240.241.116:123 0.0.0.0:* 2076/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 2076/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 2076/ntpd udp6 0 0 :::12151 :::* 1604/dhcl ient udp6 0 0 :::123 :::* 2076/ntpd Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ACC ] STREAM LISTENING 405680 22814/ssh-agent /tmp/ssh-K dkxJfFLpKTC/agent.22813 unix 2 [ ACC ] STREAM LISTENING 408230 24049/ssh-agent /tmp/ssh-o fUeNNEwAqtP/agent.22243 unix 2 [ ACC ] STREAM LISTENING 416227 29160/mongod /tmp/mongo db-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 284/udevd /run/udev/ control unix 2 [ ACC ] STREAM LISTENING 5318 1798/acpid /var/run/a cpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 5177/tmux /tmp//tmux -1000/default unix 2 [ ACC ] STREAM LISTENING 414450 28213/dbus-daemon /var/run/d bus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 404225 22324/1 /tmp/ssh-9 TlDmu4bjl/agent.22324

  Read the article

• operator overloading of stream extraction operator in C++ help

  - by Crystal

  I'm having some trouble overloading my stream extraction operator in C++ for a hw assignment. I'm not really sure why I am getting these compile errors since I thought I was doing it right... Here is my code: Complex.h #ifndef COMPLEX_H #define COMPLEX_H class Complex { //friend ostream &operator<<(ostream &output, const Complex &complexObj) const; public: Complex(double = 0.0, double = 0.0); // constructor Complex operator+(const Complex &) const; // addition Complex operator-(const Complex &) const; // subtraction void print() const; // output private: double real; // real part double imaginary; // imaginary part }; #endif Complex.cpp #include <iostream> #include "Complex.h" using namespace std; // Constructor Complex::Complex(double realPart, double imaginaryPart) : real(realPart), imaginary(imaginaryPart) { } // addition operator Complex Complex::operator+(const Complex &operand2) const { return Complex(real + operand2.real, imaginary + operand2.imaginary); } // subtraction operator Complex Complex::operator-(const Complex &operand2) const { return Complex(real - operand2.real, imaginary - operand2.imaginary); } // Overload << operator ostream &Complex::operator<<(ostream &output, const Complex &complexObj) const { cout << '(' << complexObj.real << ", " << complexObj.imaginary << ')'; return output; // returning output allows chaining } // display a Complex object in the form: (a, b) void Complex::print() const { cout << '(' << real << ", " << imaginary << ')'; } main.cpp #include <iostream> #include "Complex.h" using namespace std; int main() { Complex x; Complex y(4.3, 8.2); Complex z(3.3, 1.1); cout << "x: "; x.print(); cout << "\ny: "; y.print(); cout << "\nz: "; z.print(); x = y + z; cout << "\n\nx = y + z: " << endl; x.print(); cout << " = "; y.print(); cout << " + "; z.print(); x = y - z; cout << "\n\nx = y - z: " << endl; x.print(); cout << " = "; y.print(); cout << " - "; z.print(); cout << endl; } Compile erros: complex.cpp(23) : error C2039: '<<' : is not a member of 'Complex' complex.h(5) : see declaration of 'Complex' complex.cpp(24) : error C2270: '<<' : modifiers not allowed on nonmember functions complex.cpp(25) : error C2248: 'Complex::real' : cannot access private member declared in class 'Complex' complex.h(13) : see declaration of 'Complex::real' complex.h(5) : see declaration of 'Complex' complex.cpp(25) : error C2248: 'Complex::imaginary' : cannot access private member declared in class 'Complex' complex.h(14) : see declaration of 'Complex::imaginary' complex.h(5) : see declaration of 'Complex' Thanks!

  Read the article

• certain Smarty tags don't work in OpenX templates

  - by mikez302

  I am on a team that is developing an OpenX plugin, and I am responsible for the UI. I noticed that if I use certain Smarty tags in my template, the app doesn't work and I see an error message, similar to this: Plugin by name 'Html_select_date' was not found in the registry; used paths: default_views_helpers_: /openx/www/admin/plugins/myApp/application/modules/default/views/helpers/ OX_OXP_UI_View_Helper_: /openx/www/admin/plugins/myApp/application/../library/OX/OXP/UI/View/Helper/ OX_UI_View_Helper_: /openx/www/admin/plugins/myApp/application/../library/OX/UI/View/Helper/ Zend_View_Helper_: Zend/View/Helper/ (stack trace) The stack trace looks like this: #0 /openx/www/admin/plugins/myApp/library/Zend/View/Abstract.php(1117): Zend_Loader_PluginLoader-load('Html_select_dat...') #1 /openx/www/admin/plugins/myApp/library/Zend/View/Abstract.php(568): Zend_View_Abstract-_getPlugin('helper', 'html_select_dat...') #2 /openx/www/admin/plugins/myApp/library/OX/UI/Smarty/SmartyWithViewHelper.php(25): Zend_View_Abstract-getHelper('html_select_dat...') #3 /openx/var/templates_compiled/%2Fdefault%2Fviews%2Fscripts%2Findex%2Fview-reports.html^%%E8^E80^E80B56F2%%view-reports.html.php(38): OX_UI_Smarty_SmartyWithViewHelper-callViewHelper('html_select_dat...', Array) #4 /openx/lib/smarty/Smarty.class.php(1274): include('/openx...') #5 /openx/www/admin/plugins/myApp/library/OX/UI/View/SmartyView.php(103): Smarty-fetch('/openx...') #6 /openx/www/admin/plugins/myApp/library/Zend/View/Abstract.php(832): OX_UI_View_SmartyView-_run('/openx...') #7 /openx/www/admin/plugins/myApp/library/OX/UI/View/SmartyView.php(151): Zend_View_Abstract-render('index/view-repo...') #8 /openx/www/admin/plugins/myApp/library/OX/UI/View/Helper/WithViewScript.php(23): OX_UI_View_SmartyView-render('index/view-repo...') #9 /openx/www/admin/plugins/myApp/application/modules/default/views/helpers/ViewReports.php(5): OX_UI_View_Helper_WithViewScript::renderViewScript('index/view-repo...', Array) #10 /openx/www/admin/plugins/myApp/application/modules/default/controllers/IndexController.php(98): Default_Views_Helpers_ViewReports-renderPage() #11 /openx/www/admin/plugins/myApp/library/Zend/Controller/Action.php(512): IndexController-viewReportsAction() #12 /openx/www/admin/plugins/myApp/library/Zend/Controller/Dispatcher/Standard.php(288): Zend_Controller_Action-dispatch('viewReportsActi...') #13 /openx/www/admin/plugins/myApp/library/Zend/Controller/Front.php(945): Zend_Controller_Dispatcher_Standard-dispatch(Object(Zend_Controller_Request_Http), Object(Zend_Controller_Response_Http)) #14 /openx/www/admin/plugins/myApp/application/bootstrap.php(117): Zend_Controller_Front-dispatch() #15 /openx/www/admin/plugins/myApp/public/index.php(7): require('/openx...') #16 {main} This does not happen with all Smarty tags. For example, I can use {if}, {foreach}, or {assign} tags without any problems. But whenever I try to use {html_select_date}, {html_image}, or {html_table}, I get the errors. In case this matters, the programmer who is designing the plugin copied the openXWorkflow plugin and made some changes. I noticed that the openXWorkflow plugin has a file (openx/plugins_repo/openXWorkflow/www/admin/plugins/openXWorkflow/library/OX/UI/Smarty/SmartyCompilerWithViewHelper.php) with a class that overrides the default Smarty compiler, supposedly with the ability to compile shorthands for calling ZF view helpers. That file has a list of Smarty functions, but the list is incomplete. If I add the functions to the list, or simply delete the file, my template works fine, but I don't like to change library files. It may make the app hard to maintain, and I don't know if it will mess up something else. The file has the comment "There is no easy access to the list of Smarty's built-in functions so we need to list them here. HTML-specific functions are not included as we cover HTML generation separately.", so it seems like certain Smarty functions may be disabled on purpose for some reason. Will anything bad happen if I try to use them? If, for example, I want to use the {html_select_date} tag in my template, how would I go about doing that? Keep in mind that much of this stuff is new and unfamiliar to me. This is my first time ever using OpenX or Smarty, and I only have a little bit of experience with the Zend framework. Please let me know if we are using the wrong approach.

  Read the article

• Changing the background color of a view in real-time.

  - by Tarmon

  Hey Everyone, I am trying to implement a ListView that is composed of rows that contain a View on the left followed by a TextView to the right of that. I want to be able to change the background color of the first View based on it's position in the ListView. Below is what I have at this point but it doesn't seem to due anything. public class Routes extends ListActivity { String[] ROUTES; TextView selection; /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); ROUTES = getResources().getStringArray(R.array.routes); setContentView(R.layout.routes); setListAdapter(new IconicAdapter()); selection=(TextView)findViewById(R.id.selection); } public void onListItemClick(ListView parent, View v, int position, long id) { selection.setText(ROUTES[position]); } class IconicAdapter extends ArrayAdapter<String> { IconicAdapter() { super(Routes.this, R.layout.row, R.id.label, ROUTES); } } public View getView(int position, View convertView, ViewGroup parent) { LayoutInflater inflater = getLayoutInflater(); View row = inflater.inflate(R.layout.row, parent, false); TextView label = (TextView) row.findViewById(R.id.label); label.setText(ROUTES[position]); View icon = (View) row.findViewById(R.id.icon); switch(position){ case 0: icon.setBackgroundColor(R.color.Red); break; case 1: icon.setBackgroundColor(R.color.Red); break; case 2: icon.setBackgroundColor(R.color.Green); break; case 3: icon.setBackgroundColor(R.color.Green); break; case 4: icon.setBackgroundColor(R.color.Blue); break; case 5: icon.setBackgroundColor(R.color.Blue); break; case 6: icon.setBackgroundColor(R.color.Gray); break; case 7: icon.setBackgroundColor(R.color.Yellow); break; case 8: icon.setBackgroundColor(R.color.Brown); break; case 9: icon.setBackgroundColor(R.color.Brown); break; case 10: icon.setBackgroundColor(R.color.Brown); break; case 11: icon.setBackgroundColor(R.color.Purple); break; case 12: icon.setBackgroundColor(R.color.Red); break; case 13: icon.setBackgroundColor(R.color.Gold); break; case 14: icon.setBackgroundColor(R.color.Orange); break; } return(row); } } Any input is appreciated and if you have any questions don't hesitate to ask! Thanks, Rob

  Read the article

• Strange Recurrent Excessive I/O Wait

  - by Chris

  I know quite well that I/O wait has been discussed multiple times on this site, but all the other topics seem to cover constant I/O latency, while the I/O problem we need to solve on our server occurs at irregular (short) intervals, but is ever-present with massive spikes of up to 20k ms a-wait and service times of 2 seconds. The disk affected is /dev/sdb (Seagate Barracuda, for details see below). A typical iostat -x output would at times look like this, which is an extreme sample but by no means rare: iostat (Oct 6, 2013) tps rd_sec/s wr_sec/s avgrq-sz avgqu-sz await svctm %util 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 16.00 0.00 156.00 9.75 21.89 288.12 36.00 57.60 5.50 0.00 44.00 8.00 48.79 2194.18 181.82 100.00 2.00 0.00 16.00 8.00 46.49 3397.00 500.00 100.00 4.50 0.00 40.00 8.89 43.73 5581.78 222.22 100.00 14.50 0.00 148.00 10.21 13.76 5909.24 68.97 100.00 1.50 0.00 12.00 8.00 8.57 7150.67 666.67 100.00 0.50 0.00 4.00 8.00 6.31 10168.00 2000.00 100.00 2.00 0.00 16.00 8.00 5.27 11001.00 500.00 100.00 0.50 0.00 4.00 8.00 2.96 17080.00 2000.00 100.00 34.00 0.00 1324.00 9.88 1.32 137.84 4.45 59.60 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 22.00 44.00 204.00 11.27 0.01 0.27 0.27 0.60 Let me provide you with some more information regarding the hardware. It's a Dell 1950 III box with Debian as OS where uname -a reports the following: Linux xx 2.6.32-5-amd64 #1 SMP Fri Feb 15 15:39:52 UTC 2013 x86_64 GNU/Linux The machine is a dedicated server that hosts an online game without any databases or I/O heavy applications running. The core application consumes about 0.8 of the 8 GBytes RAM, and the average CPU load is relatively low. The game itself, however, reacts rather sensitive towards I/O latency and thus our players experience massive ingame lag, which we would like to address as soon as possible. iostat: avg-cpu: %user %nice %system %iowait %steal %idle 1.77 0.01 1.05 1.59 0.00 95.58 Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn sdb 13.16 25.42 135.12 504701011 2682640656 sda 1.52 0.74 20.63 14644533 409684488 Uptime is: 19:26:26 up 229 days, 17:26, 4 users, load average: 0.36, 0.37, 0.32 Harddisk controller: 01:00.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID SAS 1078 (rev 04) Harddisks: Array 1, RAID-1, 2x Seagate Cheetah 15K.5 73 GB SAS Array 2, RAID-1, 2x Seagate ST3500620SS Barracuda ES.2 500GB 16MB 7200RPM SAS Partition information from df: Filesystem 1K-blocks Used Available Use% Mounted on /dev/sdb1 480191156 30715200 425083668 7% /home /dev/sda2 7692908 437436 6864692 6% / /dev/sda5 15377820 1398916 13197748 10% /usr /dev/sda6 39159724 19158340 18012140 52% /var Some more data samples generated with iostat -dx sdb 1 (Oct 11, 2013) Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sdb 0.00 15.00 0.00 70.00 0.00 656.00 9.37 4.50 1.83 4.80 33.60 sdb 0.00 0.00 0.00 2.00 0.00 16.00 8.00 12.00 836.00 500.00 100.00 sdb 0.00 0.00 0.00 3.00 0.00 32.00 10.67 9.96 1990.67 333.33 100.00 sdb 0.00 0.00 0.00 4.00 0.00 40.00 10.00 6.96 3075.00 250.00 100.00 sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00 4.00 0.00 0.00 100.00 sdb 0.00 0.00 0.00 2.00 0.00 16.00 8.00 2.62 4648.00 500.00 100.00 sdb 0.00 0.00 0.00 0.00 0.00 0.00 0.00 2.00 0.00 0.00 100.00 sdb 0.00 0.00 0.00 1.00 0.00 16.00 16.00 1.69 7024.00 1000.00 100.00 sdb 0.00 74.00 0.00 124.00 0.00 1584.00 12.77 1.09 67.94 6.94 86.00 Characteristic charts generated with rrdtool can be found here: iostat plot 1, 24 min interval: http://imageshack.us/photo/my-images/600/yqm3.png/ iostat plot 2, 120 min interval: http://imageshack.us/photo/my-images/407/griw.png/ As we have a rather large cache of 5.5 GBytes, we thought it might be a good idea to test if the I/O wait spikes would perhaps be caused by cache miss events. Therefore, we did a sync and then this to flush the cache and buffers: echo 3 > /proc/sys/vm/drop_caches and directly afterwards the I/O wait and service times virtually went through the roof, and everything on the machine felt like slow motion. During the next few hours the latency recovered and everything was as before - small to medium lags in short, unpredictable intervals. Now my question is: does anybody have any idea what might cause this annoying behaviour? Is it the first indication of the disk array or the raid controller dying, or something that can be easily mended by rebooting? (At the moment we're very reluctant to do this, however, because we're afraid that the disks might not come back up again.) Any help is greatly appreciated. Thanks in advance, Chris. Edited to add: we do see one or two processes go to 'D' state in top, one of which seems to be kjournald rather frequently. If I'm not mistaken, however, this does not indicate the processes causing the latency, but rather those affected by it - correct me if I'm wrong. Does the information about uninterruptibly sleeping processes help us in any way to address the problem? @Andy Shinn requested smartctl data, here it is: smartctl -a -d megaraid,2 /dev/sdb yields: smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: SEAGATE ST3500620SS Version: MS05 Serial number: Device type: disk Transport protocol: SAS Local Time is: Mon Oct 14 20:37:13 2013 CEST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Current Drive Temperature: 20 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 1236631092 Blocks received from initiator = 1097862364 Blocks read from cache and sent to initiator = 1383620256 Number of read and write commands whose size <= segment size = 531295338 Number of read and write commands whose size > segment size = 51986460 Vendor (Seagate/Hitachi) factory information number of hours powered up = 36556.93 number of minutes until next internal SMART test = 32 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 509271032 47 0 509271079 509271079 20981.423 0 write: 0 0 0 0 0 5022.039 0 verify: 1870931090 196 0 1870931286 1870931286 100558.708 0 Non-medium error count: 0 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 36538 - [- - -] # 2 Background short Completed 16 36514 - [- - -] # 3 Background short Completed 16 36490 - [- - -] # 4 Background short Completed 16 36466 - [- - -] # 5 Background short Completed 16 36442 - [- - -] # 6 Background long Completed 16 36420 - [- - -] # 7 Background short Completed 16 36394 - [- - -] # 8 Background short Completed 16 36370 - [- - -] # 9 Background long Completed 16 36364 - [- - -] #10 Background short Completed 16 36361 - [- - -] #11 Background long Completed 16 2 - [- - -] #12 Background short Completed 16 0 - [- - -] Long (extended) Self Test duration: 6798 seconds [113.3 minutes] smartctl -a -d megaraid,3 /dev/sdb yields: smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Device: SEAGATE ST3500620SS Version: MS05 Serial number: Device type: disk Transport protocol: SAS Local Time is: Mon Oct 14 20:37:26 2013 CEST Device supports SMART and is Enabled Temperature Warning Disabled or Not Supported SMART Health Status: OK Current Drive Temperature: 19 C Drive Trip Temperature: 68 C Elements in grown defect list: 0 Vendor (Seagate) cache information Blocks sent to initiator = 288745640 Blocks received from initiator = 1097848399 Blocks read from cache and sent to initiator = 1304149705 Number of read and write commands whose size <= segment size = 527414694 Number of read and write commands whose size > segment size = 51986460 Vendor (Seagate/Hitachi) factory information number of hours powered up = 36596.83 number of minutes until next internal SMART test = 28 Error counter log: Errors Corrected by Total Correction Gigabytes Total ECC rereads/ errors algorithm processed uncorrected fast | delayed rewrites corrected invocations [10^9 bytes] errors read: 610862490 44 0 610862534 610862534 20470.133 0 write: 0 0 0 0 0 5022.480 0 verify: 2861227413 203 0 2861227616 2861227616 100872.443 0 Non-medium error count: 1 SMART Self-test log Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] Description number (hours) # 1 Background short Completed 16 36580 - [- - -] # 2 Background short Completed 16 36556 - [- - -] # 3 Background short Completed 16 36532 - [- - -] # 4 Background short Completed 16 36508 - [- - -] # 5 Background short Completed 16 36484 - [- - -] # 6 Background long Completed 16 36462 - [- - -] # 7 Background short Completed 16 36436 - [- - -] # 8 Background short Completed 16 36412 - [- - -] # 9 Background long Completed 16 36404 - [- - -] #10 Background short Completed 16 36401 - [- - -] #11 Background long Completed 16 2 - [- - -] #12 Background short Completed 16 0 - [- - -] Long (extended) Self Test duration: 6798 seconds [113.3 minutes]

  Read the article

• Failed to convert a wmv file to mp4 with ffmpeg

  - by Olaf Erlandsen

  i need a help with this command FFMPEG COMMAND: ffmpeg -y -i /input.wmv -vcodec libx264 -acodec libfaac -ac 2 -bufsize 20M -sameq -f mp4 /output.mp4 Output: ffmpeg version 1.0 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 9 2012 07:04:08 with gcc 4.4.6 (GCC) 20120305 (Red Hat 4.4.6-4) [wmv3 @ 0x16a4800] Extra data: 8 bits left, value: 0 Guessed Channel Layout for Input Stream #0.0 : stereo Input #0, asf, from '/input.wmv': Metadata: WMFSDKVersion : 11.0.5721.5275 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 Duration: 00:01:35.10, start: 0.000000, bitrate: 496 kb/s Stream #0:0(spa): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, s16, 64 kb/s Stream #0:1(spa): Video: wmv3 (Main) (WMV3 / 0x33564D57), yuv420p, 320x240, 425 kb/s, SAR 1:1 DAR 4:3, 29.97 tbr, 1k tbn, 1k tbc [libx264 @ 0x16c3000] VBV bufsize set but maxrate unspecified, ignored [libx264 @ 0x16c3000] using SAR=1/1 [libx264 @ 0x16c3000] using cpu capabilities: MMX2 SSE2Fast SSSE3 FastShuffle SSE4.2 [libx264 @ 0x16c3000] profile High, level 1.3 [libx264 @ 0x16c3000] 264 - core 128 - H.264/MPEG-4 AVC codec - Copyleft 2003-2012 - http://www.videolan.org/x264.html - options: cabac=1 ref=3 deblock=1:0:0 analyse=0x3:0x113 me=hex subme=7 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=1 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=6 lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0 bluray_compat=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=2 keyint=250 keyint_min=25 scenecut=40 intra_refresh=0 rc_lookahead=40 rc=crf mbtree=1 crf=23.0 qcomp=0.60 qpmin=0 qpmax=69 qpstep=4 ip_ratio=1.40 aq=1:1.00 [wmv3 @ 0x16a4800] Extra data: 8 bits left, value: 0 Output #0, mp4, to '/output.mp4': Metadata: WMFSDKVersion : 11.0.5721.5275 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 encoder : Lavf54.29.104 Stream #0:0(spa): Video: h264 ([33][0][0][0] / 0x0021), yuv420p, 320x240 [SAR 1:1 DAR 4:3], q=-1--1, 30k tbn, 29.97 tbc Stream #0:1(spa): Audio: aac ([64][0][0][0] / 0x0040), 44100 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0:1 -> #0:0 (wmv3 -> libx264) Stream #0:0 -> #0:1 (wmav2 -> libfaac) Press [q] to stop, [?] for help [libfaac @ 0x16b3600] Que input is backward in time [mp4 @ 0x16bb3a0] st:0 PTS: 6174 DTS: 6174 < 7169 invalid, clipping frame= 144 fps=0.0 q=29.0 size= 207kB time=00:00:03.38 bitrate= 500.3kbits/s frame= 259 fps=257 q=29.0 size= 447kB time=00:00:07.30 bitrate= 501.3kbits/s frame= 375 fps=248 q=29.0 size= 668kB time=00:00:11.01 bitrate= 496.5kbits/s frame= 487 fps=241 q=29.0 size= 836kB time=00:00:14.85 bitrate= 460.7kbits/s frame= 605 fps=240 q=29.0 size= 1080kB time=00:00:18.92 bitrate= 467.4kbits/s frame= 719 fps=238 q=29.0 size= 1306kB time=00:00:22.80 bitrate= 469.2kbits/s frame= 834 fps=237 q=29.0 size= 1546kB time=00:00:26.52 bitrate= 477.3kbits/s frame= 953 fps=237 q=29.0 size= 1763kB time=00:00:30.27 bitrate= 477.0kbits/s frame= 1071 fps=237 q=29.0 size= 1986kB time=00:00:34.36 bitrate= 473.4kbits/s frame= 1161 fps=231 q=29.0 size= 2160kB time=00:00:37.21 bitrate= 475.4kbits/s frame= 1221 fps=220 q=29.0 size= 2282kB time=00:00:39.53 bitrate= 472.9kbits/s frame= 1280 fps=212 q=29.0 size= 2392kB time=00:00:41.16 bitrate= 476.1kbits/s frame= 1331 fps=203 q=29.0 size= 2502kB time=00:00:43.23 bitrate= 474.1kbits/s frame= 1379 fps=195 q=29.0 size= 2618kB time=00:00:44.72 bitrate= 479.6kbits/s frame= 1430 fps=189 q=29.0 size= 2733kB time=00:00:46.34 bitrate= 483.0kbits/s frame= 1487 fps=184 q=29.0 size= 2851kB time=00:00:48.40 bitrate= 482.6kbits/s frame= 1546 fps=180 q=26.0 size= 2973kB time=00:00:50.43 bitrate= 482.9kbits/s frame= 1610 fps=177 q=29.0 size= 3112kB time=00:00:52.40 bitrate= 486.5kbits/s frame= 1672 fps=174 q=29.0 size= 3231kB time=00:00:54.35 bitrate= 487.0kbits/s frame= 1733 fps=171 q=29.0 size= 3348kB time=00:00:56.51 bitrate= 485.3kbits/s frame= 1792 fps=169 q=29.0 size= 3459kB time=00:00:58.28 bitrate= 486.2kbits/s frame= 1851 fps=166 q=29.0 size= 3588kB time=00:01:00.32 bitrate= 487.2kbits/s frame= 1910 fps=164 q=29.0 size= 3716kB time=00:01:02.36 bitrate= 488.1kbits/s frame= 1972 fps=162 q=29.0 size= 3833kB time=00:01:04.45 bitrate= 487.1kbits/s frame= 2032 fps=161 q=29.0 size= 3946kB time=00:01:06.40 bitrate= 486.8kbits/s frame= 2091 fps=159 q=29.0 size= 4080kB time=00:01:08.35 bitrate= 488.9kbits/s frame= 2150 fps=158 q=29.0 size= 4201kB time=00:01:10.54 bitrate= 487.9kbits/s frame= 2206 fps=156 q=29.0 size= 4315kB time=00:01:12.39 bitrate= 488.3kbits/s frame= 2263 fps=154 q=29.0 size= 4438kB time=00:01:14.21 bitrate= 489.9kbits/s frame= 2327 fps=154 q=29.0 size= 4567kB time=00:01:16.16 bitrate= 491.2kbits/s frame= 2388 fps=152 q=29.0 size= 4666kB time=00:01:18.48 bitrate= 487.0kbits/s frame= 2450 fps=152 q=29.0 size= 4776kB time=00:01:20.24 bitrate= 487.6kbits/s frame= 2511 fps=151 q=29.0 size= 4890kB time=00:01:22.15 bitrate= 487.6kbits/s frame= 2575 fps=150 q=29.0 size= 5015kB time=00:01:24.42 bitrate= 486.6kbits/s frame= 2635 fps=149 q=29.0 size= 5130kB time=00:01:26.62 bitrate= 485.2kbits/s frame= 2695 fps=148 q=29.0 size= 5258kB time=00:01:28.65 bitrate= 485.9kbits/s frame= 2758 fps=147 q=29.0 size= 5382kB time=00:01:30.64 bitrate= 486.4kbits/s frame= 2816 fps=147 q=29.0 size= 5521kB time=00:01:32.69 bitrate= 487.9kbits/s get_buffer() failed Error while decoding stream #0:0: Invalid argument frame= 2848 fps=143 q=-1.0 Lsize= 5787kB time=00:01:35.10 bitrate= 498.4kbits/s video:5099kB audio:581kB subtitle:0 global headers:0kB muxing overhead 1.884230% [libx264 @ 0x16c3000] frame I:12 Avg QP:22.64 size: 12092 [libx264 @ 0x16c3000] frame P:1508 Avg QP:25.39 size: 2933 [libx264 @ 0x16c3000] frame B:1328 Avg QP:30.62 size: 491 [libx264 @ 0x16c3000] consecutive B-frames: 10.0% 80.8% 8.1% 1.1% [libx264 @ 0x16c3000] mb I I16..4: 1.8% 72.1% 26.0% [libx264 @ 0x16c3000] mb P I16..4: 0.4% 2.4% 0.3% P16..4: 48.3% 19.6% 19.3% 0.0% 0.0% skip: 9.5% [libx264 @ 0x16c3000] mb B I16..4: 0.1% 0.2% 0.0% B16..8: 52.6% 6.6% 2.3% direct: 1.4% skip:36.8% L0:48.8% L1:42.5% BI: 8.7% [libx264 @ 0x16c3000] 8x8 transform intra:75.3% inter:55.4% [libx264 @ 0x16c3000] coded y,uvDC,uvAC intra: 77.9% 81.7% 33.1% inter: 24.2% 11.6% 1.1% [libx264 @ 0x16c3000] i16 v,h,dc,p: 25% 16% 44% 14% [libx264 @ 0x16c3000] i8 v,h,dc,ddl,ddr,vr,hd,vl,hu: 19% 15% 29% 6% 5% 6% 6% 7% 7% [libx264 @ 0x16c3000] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 20% 15% 17% 7% 9% 8% 9% 7% 7% [libx264 @ 0x16c3000] i8c dc,h,v,p: 50% 19% 24% 7% [libx264 @ 0x16c3000] Weighted P-Frames: Y:3.8% UV:1.1% [libx264 @ 0x16c3000] ref P L0: 75.6% 19.1% 4.2% 1.0% 0.1% [libx264 @ 0x16c3000] ref B L0: 98.1% 1.9% 0.0% [libx264 @ 0x16c3000] ref B L1: 98.9% 1.1% [libx264 @ 0x16c3000] kb/s:439.47 FFMPEG Configuration: --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libvpx --enable-libfaac --enable-libmp3lame --enable-libtheora --enable-libvorbis --enable-libx264 --enable-libxvid --enable-gpl --enable-postproc --enable-nonfree libavutil 51. 73.101 / 51. 73.101 libavcodec 54. 59.100 / 54. 59.100 libavformat 54. 29.104 / 54. 29.104 libavdevice 54. 2.101 / 54. 2.101 libavfilter 3. 17.100 / 3. 17.100 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 PROBLEM #1: [libfaac @ 0x16b3600] Que input is backward in time [mp4 @ 0x16bb3a0] st:0 PTS: 6174 DTS: 6174 < 7169 invalid, clipping PROBLEM #2: get_buffer() failed Error while decoding stream #0:0: Invalid argument

  Read the article

• how to insert data if it contain apostrophe ?

  - by angel ansari

  Actally my task is load csv file into sql server using c# so i have split it by comma my problem is that some field's data contain apostrop and i m firing insert query to load data into sql so its give error my coding like that using System; using System.Collections.Generic; using System.ComponentModel; using System.Data; using System.Drawing; using System.Linq; using System.Text; using System.Windows.Forms; using System.IO; using System.Data.SqlClient; namespace tool { public partial class Form1 : Form { StreamReader reader; SqlConnection con; SqlCommand cmd; int count = 0; //int id=0; FileStream fs; string file = null; string file_path = null; SqlCommand sql_del = null; public Form1() { InitializeComponent(); } private void button1_Click(object sender, EventArgs e) { OpenFileDialog file1 = new OpenFileDialog(); file1.ShowDialog(); textBox1.Text = file1.FileName.ToString(); file = Path.GetFileName(textBox1.Text); file_path = textBox1.Text; fs = new FileStream(file_path, FileMode.Open, FileAccess.Read); } private void button2_Click(object sender, EventArgs e) { if (file != null ) { sql_del = new SqlCommand("Delete From credit_debit1", con); sql_del.ExecuteNonQuery(); reader = new StreamReader(file_path); string line_content = null; string[] items = new string[] { }; while ((line_content = reader.ReadLine()) != null) { if (count >=4680) { items = line_content.Split(','); string region = items[0].Trim('"'); string station = items[1].Trim('"'); string ponumber = items[2].Trim('"'); string invoicenumber = items[3].Trim('"'); string invoicetype = items[4].Trim('"'); string filern = items[5].Trim('"'); string client = items[6].Trim('"'); string origin = items[7].Trim('"'); string destination = items[8].Trim('"'); string agingdate = items[9].Trim('"'); string activitydate = items[10].Trim('"'); if ((invoicenumber == "-") || (string.IsNullOrEmpty(invoicenumber))) { invoicenumber = "null"; } else { invoicenumber = "'" + invoicenumber + "'"; } if ((destination == "-") || (string.IsNullOrEmpty(destination))) { destination = "null"; } else { destination = "'" + destination + "'"; } string vendornumber = items[11].Trim('"'); string vendorname = items[12].Trim('"'); string vendorsite = items[13].Trim('"'); string vendorref = items[14].Trim('"'); string subaccount = items[15].Trim('"'); string osdaye = items[16].Trim('"'); string osaa = items[17].Trim('"'); string osda = items[18].Trim('"'); string our = items[19].Trim('"'); string squery = "INSERT INTO credit_debit1" + "([id],[Region],[Station],[PONumber],[InvoiceNumber],[InvoiceType],[FileRefNumber],[Client],[Origin],[Destination], " + "[AgingDate],[ActivityDate],[VendorNumber],[VendorName],[VendorSite],[VendorRef],[SubAccount],[OSDay],[OSAdvAmt],[OSDisbAmt], " + "[OverUnderRecovery] ) " + "VALUES " + "('" + count + "','" + region + "','" + station + "','" + ponumber + "'," + invoicenumber + ",'" + invoicetype + "','" + filern + "','" + client + "','" + origin + "'," + destination + "," + "'" + (string)agingdate.ToString() + "','" + (string)activitydate.ToString() + "','" + vendornumber + "',' " + vendorname + "',' " + vendorsite + "',' " + vendorref + "'," + "'" + subaccount + "','" + osdaye + "','" + osaa + "','" + osda + "','" + our + "') "; cmd = new SqlCommand(squery, con); cmd.CommandTimeout = 1500; cmd.ExecuteNonQuery(); } label2.Text = count.ToString(); Application.DoEvents(); count++; } MessageBox.Show("Process completed"); } else { MessageBox.Show("path select"); } } private void button3_Click(object sender, EventArgs e) { this.Close(); } private void Form1_Load(object sender, EventArgs e) { con = new SqlConnection("Data Source=192.168.50.200;User ID=EGL_TEST;Password=TEST;Initial Catalog=EGL_TEST;"); con.Open(); } } } vendername field contain data (MCCOLLISTER'S TRANSPORTATION) so how to pass this data

  Read the article

• How to use apache beanutils in a NetBeans platform project? (Error with commons-logging)

  - by I82Much

  For starters, this question is not so much about programming in the NetBeans IDE as developing a NetBeans project (e.g. using the NetBeans Platform framework). I am attempting to use the BeanUtils library to introspect my domain models and provide the properties to display in a property sheet. Sample code: public class MyNode extends AbstractNode implements PropertyChangeListener { private static final PropertyUtilsBean bean = new PropertyUtilsBean(); // snip protected Sheet createSheet() { Sheet sheet = Sheet.createDefault(); Sheet.Set set = Sheet.createPropertiesSet(); APIObject obj = getLookup().lookup (APIObject.class); PropertyDescriptor[] descriptors = bean.getPropertyDescriptors(obj); for (PropertyDescriptor d : descriptors) { Method readMethod = d.getReadMethod(); Method writeMethod = d.getWriteMethod(); Class valueType = d.getClass(); Property p = new PropertySupport.Reflection(obj, valueType, readMethod, writeMethod); set.put(p); } sheet.put(set); return sheet; } I have created a wrapper module around commons-beanutils-1.8.3.jar, and added a dependency on the module in my module containing the above code. Everything compiles fine. When I attempt to run the program and open the property sheet view (i.e.. the above code actually gets run), I get the following error: java.lang.ClassNotFoundException: org.apache.commons.logging.LogFactory at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:319) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:330) at java.lang.ClassLoader.loadClass(ClassLoader.java:254) at org.netbeans.ProxyClassLoader.loadClass(ProxyClassLoader.java:259) Caused: java.lang.ClassNotFoundException: org.apache.commons.logging.LogFactory starting from ModuleCL@64e48e45[org.apache.commons.beanutils] with possible defining loaders [ModuleCL@75da931b[org.netbeans.libs.commons_logging]] and declared parents [] at org.netbeans.ProxyClassLoader.loadClass(ProxyClassLoader.java:261) at java.lang.ClassLoader.loadClass(ClassLoader.java:254) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:399) Caused: java.lang.NoClassDefFoundError: org/apache/commons/logging/LogFactory at org.apache.commons.beanutils.PropertyUtilsBean.<init>(PropertyUtilsBean.java:132) at org.myorg.myeditor.MyNode.<clinit>(MyNode.java:35) at org.myorg.myeditor.MyEditor.<init>(MyEditor.java:33) at org.myorg.myeditor.OpenEditorAction.actionPerformed(OpenEditorAction.java:13) at org.openide.awt.AlwaysEnabledAction$1.run(AlwaysEnabledAction.java:139) at org.netbeans.modules.openide.util.ActionsBridge.implPerformAction(ActionsBridge.java:83) at org.netbeans.modules.openide.util.ActionsBridge.doPerformAction(ActionsBridge.java:67) at org.openide.awt.AlwaysEnabledAction.actionPerformed(AlwaysEnabledAction.java:142) at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2028) at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2351) at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387) at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242) at javax.swing.AbstractButton.doClick(AbstractButton.java:389) at com.apple.laf.ScreenMenuItem.actionPerformed(ScreenMenuItem.java:95) at java.awt.MenuItem.processActionEvent(MenuItem.java:627) at java.awt.MenuItem.processEvent(MenuItem.java:586) at java.awt.MenuComponent.dispatchEventImpl(MenuComponent.java:317) at java.awt.MenuComponent.dispatchEvent(MenuComponent.java:305) [catch] at java.awt.EventQueue.dispatchEvent(EventQueue.java:638) at org.netbeans.core.TimableEventQueue.dispatchEvent(TimableEventQueue.java:125) at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:296) at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:211) at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:201) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:196) at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:188) at java.awt.EventDispatchThread.run(EventDispatchThread.java:122) I understand that beanutils is using the commons-logging component (wish it mentioned that in the javadoc, but that's OK). I have tried adding the commons-logging component in two different ways (creating a wrapper library around the commons-logging library, and putting a dependency on the Commons Logging Integration library). Neither solves the problem. Has anyone successfully used BeanUtils in a NetBeans Platform project?

  Read the article

• Delphi 2010 differs in Canvas transparency compared to Delphi 7?

  - by Tom1952

  I'm porting some very old code from Delph7 to Delphi2010 with a few changes as possible to the existing code base for the usual reasons. First: the good news for anyone who hasn't jumped yet: it's not as daunting as it may look! I'm actually pleased (& surprised) at how easy 1,000,000+ lines of code have moved across. And what a relief to be back on the leading edge! Delphi 2010 has so many great enhancements. However, I'm having a cosmetic problem with some TStringGrids and TDbGrids descendants. In the last century (literally!) someone wrote the two methods below. The first method is used to justify text. When run in Delphi 2010, the new text and the unjustified text to both appear in the cells written to. Of course it's a mess visually, almost illegible. Sometimes, as a result of the second method is use, the grid cells are actually semi-transparent, with text from the window below showing through. (Again, not pretty!) It appears to me that Delphi 2010's TDbGrid and TStringGrid have some differences in the way they handle transparency? I haven't much experience in this area of Delphi (in fact, I have no idea what the 2nd method is actually doing!) and was hoping someone could give me some pointers on what's going on and how to fix it. TIA! Method 1 procedure TForm1.gridDrawCell(Sender: TObject; Col, Row: Integer; Rect: TRect; State: TGridDrawState); {Used to align text in cells.} var x: integer; begin if (Row > 0) AND (Col > 0) then begin SetTextAlign(grdTotals.Canvas.Handle, TA_RIGHT); x := Rect.Right - 2; end else begin SetTextAlign(grdTotals.Canvas.Handle, TA_CENTER); x := (Rect.Left + Rect.Right) div 2; end; grdTotals.Canvas.TextRect(Rect, x, Rect.Top+2, grdTotals.Cells[Col,Row]); end; Method 2 procedure WriteText(ACanvas: TCanvas; ARect: TRect; DX, DY: Integer; const Text: string; TitleBreak: TTitleBreak; Alignment: TAlignment); const AlignFlags: array [TAlignment] of Integer = (DT_LEFT or { DT_WORDBREAK or } DT_EXPANDTABS or DT_NOPREFIX, DT_RIGHT or { DT_WORDBREAK or } DT_EXPANDTABS or DT_NOPREFIX, DT_CENTER or { DT_WORDBREAK or } DT_EXPANDTABS or DT_NOPREFIX); var ABitmap: TBitmap; AdjustBy: Integer; B, R: TRect; WordBreak: Integer; begin WordBreak := 0; if (TitleBreak = tbAlways) or ((TitleBreak = tbDetect) and (Pos(Chr(13) + Chr(10), Text) = 0)) then WordBreak := DT_WORDBREAK; ABitmap := TBitmap.Create; try ABitmap.Canvas.Lock; try AdjustBy := 1; if (Alignment = taRightJustify) then Inc(AdjustBy); with ABitmap, ARect do begin Width := Max(Width, Right - Left); Height := Max(Height, Bottom - Top); R := Rect(DX, DY, Right - Left - AdjustBy, Bottom - Top - 1); { @@@ } B := Rect(0, 0, Right - Left, Bottom - Top); end; with ABitmap.Canvas do begin Font := ACanvas.Font; Brush := ACanvas.Brush; Brush.Style := bsSolid; FillRect(B); SetBkMode(Handle, TRANSPARENT); DrawText(Handle, PChar(Text), Length(Text), R, AlignFlags[Alignment] or WordBreak); end; ACanvas.CopyRect(ARect, ABitmap.Canvas, B); finally ABitmap.Canvas.Unlock; end; finally ABitmap.Free; end; end;

  Read the article

• Aero Glass Buttons Like Windows Media Player?

  - by Tanner

  Hi everybody, I am making making a program and I want to have a Aero Glass set of controls just like Windows Media Player, I found this: http://blogs.msdn.com/b/tims/archive/2006/04/18/578637.aspx but it just draws black. I also found a control that had the media player controls built in right ton the glass but it was no good it didn't want to render right and made different parts of my program not work. Any controls, or ways to extend the Aero glass so I can at least add my own buttons would be greatly appreciated. Thanks :) BTW C# only. :)

  Read the article

• how to make google-maps info window editable ..

  - by zjm1126

  i want to do this : the info window can be editable when i click the info window. this is my code: <!DOCTYPE html PUBLIC "-//WAPFORUM//DTD XHTML Mobile 1.0//EN" "http://www.wapforum.org/DTD/xhtml-mobile10.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" > <head> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"> <meta name="viewport" content="width=device-width,minimum-scale=0.3,maximum-scale=5.0,user-scalable=yes"> </head> <body onload="initialize()" onunload="GUnload()"> <style type="text/css"> *{ margin:0; padding:0; } </style> <!--<div style="width:100px;height:100px;background:blue;"> </div>--> <div id="map_canvas" style="width: 500px; height: 300px;"></div> <div class=b style="width: 20px; height: 20px;background:red;position:absolute;left:700px;top:200px;"></div> <div class=b style="width: 20px; height: 20px;background:red;position:absolute;left:700px;top:200px;"></div> <script src="jquery-1.4.2.js" type="text/javascript"></script> <script src="jquery-ui-1.8rc3.custom.min.js" type="text/javascript"></script> <script src="http://maps.google.com/maps?file=api&amp;v=2&amp;key=ABQIAAAA-7cuV3vqp7w6zUNiN_F4uBRi_j0U6kJrkFvY4-OX2XYmEAa76BSNz0ifabgugotzJgrxyodPDmheRA&sensor=false"type="text/javascript"></script> <script type="text/javascript"> var aFn; //********** function initialize() { if (GBrowserIsCompatible()) { var map = new GMap2(document.getElementById("map_canvas")); var center=new GLatLng(39.9493, 116.3975); map.setCenter(center, 13); aFn=function(x,y){ var point =new GPoint(x,y) point = map.fromContainerPixelToLatLng(point); //console.log(point.x+" "+point.y) var marker = new GMarker(point,{draggable:true}); GEvent.addListener(marker, "click", function() { marker.openInfoWindowHtml("<b>wwww</b>"); }); map.addOverlay(marker); /********** var marker = new GMarker(point, {draggable: true}); GEvent.addListener(marker, "dragstart", function() { map.closeInfoWindow(); }); GEvent.addListener(marker, "dragend", function() { marker.openInfoWindowHtml("????..."); }); map.addOverlay(marker); //*/ } $(".b").draggable({ revert: true, revertDuration: 0 }); $("#map_canvas").droppable({ drop: function(event,ui) { //console.log(ui.offset.left+' '+ui.offset.top) aFn(event.pageX-$("#map_canvas").offset().left,event.pageY-$("#map_canvas").offset().top); } }); } } </script> </body> </html>

  Read the article

• vSphere ESX 5.5 hosts cannot connect to NFS Server

  - by Gerald

  Summary: My problem is I cannot use the QNAP NFS Server as an NFS datastore from my ESX hosts despite the hosts being able to ping it. I'm utilising a vDS with LACP uplinks for all my network traffic (including NFS) and a subnet for each vmkernel adapter. Setup: I'm evaluating vSphere and I've got two vSphere ESX 5.5 hosts (node1 and node2) and each one has 4x NICs. I've teamed them all up using LACP/802.3ad with my switch and then created a distributed switch between the two hosts with each host's LAG as the uplink. All my networking is going through the distributed switch, ideally, I want to take advantage of DRS and the redundancy. I have a domain controller VM ("Central") and vCenter VM ("vCenter") running on node1 (using node1's local datastore) with both hosts attached to the vCenter instance. Both hosts are in a vCenter datacenter and a cluster with HA and DRS currently disabled. I have a QNAP TS-669 Pro (Version 4.0.3) (TS-x69 series is on VMware Storage HCL) which I want to use as the NFS server for my NFS datastore, it has 2x NICs teamed together using 802.3ad with my switch. vmkernel.log: The error from the host's vmkernel.log is not very useful: NFS: 157: Command: (mount) Server: (10.1.2.100) IP: (10.1.2.100) Path: (/VM) Label (datastoreNAS) Options: (None) cpu9:67402)StorageApdHandler: 698: APD Handle 509bc29f-13556457 Created with lock[StorageApd0x411121] cpu10:67402)StorageApdHandler: 745: Freeing APD Handle [509bc29f-13556457] cpu10:67402)StorageApdHandler: 808: APD Handle freed! cpu10:67402)NFS: 168: NFS mount 10.1.2.100:/VM failed: Unable to connect to NFS server. Network Setup: Here is my distributed switch setup (JPG). Here are my networks. 10.1.1.0/24 VM Management (VLAN 11) 10.1.2.0/24 Storage Network (NFS, VLAN 12) 10.1.3.0/24 VM vMotion (VLAN 13) 10.1.4.0/24 VM Fault Tolerance (VLAN 14) 10.2.0.0/24 VM's Network (VLAN 20) vSphere addresses 10.1.1.1 node1 Management 10.1.1.2 node2 Management 10.1.2.1 node1 vmkernel (For NFS) 10.1.2.2 node2 vmkernel (For NFS) etc. Other addresses 10.1.2.100 QNAP TS-669 (NFS Server) 10.2.0.1 Domain Controller (VM on node1) 10.2.0.2 vCenter (VM on node1) I'm using a Cisco SRW2024P Layer-2 switch (Jumboframes enabled) with the following setup: LACP LAG1 for node1 (Ports 1 through 4) setup as VLAN trunk for VLANs 11-14,20 LACP LAG2 for my router (Ports 5 through 8) setup as VLAN trunk for VLANs 11-14,20 LACP LAG3 for node2 (Ports 9 through 12) setup as VLAN trunk for VLANs 11-14,20 LACP LAG4 for the QNAP (Ports 23 and 24) setup to accept untagged traffic into VLAN 12 Each subnet is routable to another, although, connections to the NFS server from vmk1 shouldn't need it. All other traffic (vSphere Web Client, RDP etc.) goes through this setup fine. I tested the QNAP NFS server beforehand using ESX host VMs atop of a VMware Workstation setup with a dedicated physical NIC and it had no problems. The ACL on the NFS Server share is permissive and allows all subnet ranges full access to the share. I can ping the QNAP from node1 vmk1, the adapter that should be used to NFS: ~ # vmkping -I vmk1 10.1.2.100 PING 10.1.2.100 (10.1.2.100): 56 data bytes 64 bytes from 10.1.2.100: icmp_seq=0 ttl=64 time=0.371 ms 64 bytes from 10.1.2.100: icmp_seq=1 ttl=64 time=0.161 ms 64 bytes from 10.1.2.100: icmp_seq=2 ttl=64 time=0.241 ms Netcat does not throw an error: ~ # nc -z 10.1.2.100 2049 Connection to 10.1.2.100 2049 port [tcp/nfs] succeeded! The routing table of node1: ~ # esxcfg-route -l VMkernel Routes: Network Netmask Gateway Interface 10.1.1.0 255.255.255.0 Local Subnet vmk0 10.1.2.0 255.255.255.0 Local Subnet vmk1 10.1.3.0 255.255.255.0 Local Subnet vmk2 10.1.4.0 255.255.255.0 Local Subnet vmk3 default 0.0.0.0 10.1.1.254 vmk0 VM Kernel NIC info ~ # esxcfg-vmknic -l Interface Port Group/DVPort IP Family IP Address Netmask Broadcast MAC Address MTU TSO MSS Enabled Type vmk0 133 IPv4 10.1.1.1 255.255.255.0 10.1.1.255 00:50:56:66:8e:5f 1500 65535 true STATIC vmk0 133 IPv6 fe80::250:56ff:fe66:8e5f 64 00:50:56:66:8e:5f 1500 65535 true STATIC, PREFERRED vmk1 164 IPv4 10.1.2.1 255.255.255.0 10.1.2.255 00:50:56:68:f5:1f 1500 65535 true STATIC vmk1 164 IPv6 fe80::250:56ff:fe68:f51f 64 00:50:56:68:f5:1f 1500 65535 true STATIC, PREFERRED vmk2 196 IPv4 10.1.3.1 255.255.255.0 10.1.3.255 00:50:56:66:18:95 1500 65535 true STATIC vmk2 196 IPv6 fe80::250:56ff:fe66:1895 64 00:50:56:66:18:95 1500 65535 true STATIC, PREFERRED vmk3 228 IPv4 10.1.4.1 255.255.255.0 10.1.4.255 00:50:56:72:e6:ca 1500 65535 true STATIC vmk3 228 IPv6 fe80::250:56ff:fe72:e6ca 64 00:50:56:72:e6:ca 1500 65535 true STATIC, PREFERRED Things I've tried/checked: I'm not using DNS names to connect to the NFS server. Checked MTU. Set to 9000 for vmk1, dvSwitch and Cisco switch and QNAP. Moved QNAP onto VLAN 11 (VM Management, vmk0) and gave it an appropriate address, still had same issue. Changed back afterwards of course. Tried initiating the connection of NAS datastore from vSphere Client (Connected to vCenter or directly to host), vSphere Web Client and the host's ESX Shell. All resulted in the same problem. Tried a path name of "VM", "/VM" and "/share/VM" despite not even having a connection to server. I plugged in a linux system (10.1.2.123) into a switch port configured for VLAN 12 and tried mounting the NFS share 10.1.2.100:/VM, it worked successfully and I had read-write access to it I tried disabling the firewall on the ESX host esxcli network firewall set --enabled false I'm out of ideas on what to try next. The things I'm doing differently from my VMware Workstation setup is the use of LACP with a physical switch and a virtual distributed switch between the two hosts. I'm guessing the vDS is probably the source of my troubles but I don't know how to fix this problem without eliminating it.

  Read the article

• Native Mouse events with Flash and Selenium

  - by Dan at Demand

  I understand that Selenium does not support Flash, but it is my understanding that I should be able to do some simplistic testing of Flash by using Selenium's built in native mouse support and doing mouse up/down events based on coordinates. Is this correct? I can't seem to get it working. I'm trying to test on this page: http://mandy-mania.blogspot.com/2010/04/sneak-peek-of-final-season-of-lost-dvd.html and all I'm trying to do is click on the flash object so it plays the video. I've tried all sorts of commands, MouseOver, MouseDown, MouseDownAt, MouseUp, MouseUpAt, etc. So, I'm wondering if this just theoretically doesn't work or if I'm just doing something wrong. The xpath I'm using is //object[@id='player'], although I've tried a number of different combinations. And yes, I've also tried just the straight click command. Any suggestions? Thanks!

  Read the article

• Debugging feature activation in SharePoint 2007

  - by Eric U.

  I have a SharePoint feature that is activated under 'Site Collection Features' that is having some issues being activated. I've activated it through the stsadm as well as the SharePoint UI, both unsuccessful. The feature toggles from deactivated to activated, but the result that should be there is not. The result is some pages that should be created. So my question is does anyone know of a way to step through the activation of features process? I'd like to be able to attach Visual Studio 2008 to the browser and step through a few breakpoints that I've set. I've narrowed the error down to the FeatureReceiver's FeatureActivated(SPFeatureReceivrProperties properties) Pages that I've been referencing: http://msdn.microsoft.com/en-us/library/ee231550.aspx http://blogs.msdn.com/b/sharepoint/archive/2007/04/10/debugger-feature-for-sharepoint.aspx

  Read the article

• jQuery::Scrollable Div does not work

  - by Legend

  I am trying to create a scrollable DIV using the following: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> <html> <head> <title>Test</title> <meta http-equiv="Content-Type" content="text/html; charset=UTF-8"/> <script type="text/javascript" src="lib/jquery/jquery-1.3.2.js"></script> <style type="text/css"> div.container { overflow:hidden; width:200px; height:200px; } div.content { position:relative; top:0; } </style> <script type="text/javascript"> $(function(){ $(".container a.up").bind("click", function(){ var topVal = $(this).parents(".container").find(".content").css("top"); $(this).parents(".container").find(".content").css("top", topVal-10); }); $(".container a.dn").bind("click", function(){ var topVal = $(this).parents(".container").find(".content").css("top"); $(this).parents(".container").find(".content").css("top", topVal+10); }); }); </script> </head> <body> <div class="container"> <p> <a href="#" class="up">Up</a> / <a href="#" class="dn">Down</a> </p> <div class="content"> <p>Hello World 1</p> <p>Hello World 2</p> <p>Hello World 3</p> <p>Hello World 4</p> <p>Hello World 5</p> <p>Hello World 6</p> <p>Hello World 7</p> <p>Hello World 8</p> <p>Hello World 9</p> <p>Hello World 10</p> <p>Hello World 10</p> <p>Hello World 11</p> <p>Hello World 12</p> <p>Hello World 13</p> <p>Hello World 14</p> <p>Hello World 15</p> <p>Hello World 16</p> <p>Hello World 17</p> <p>Hello World 18</p> <p>Hello World 19</p> <p>Hello World 20</p> <p>Hello World 21</p> <p>Hello World 22</p> <p>Hello World 23</p> <p>Hello World 24</p> <p>Hello World 25</p> <p>Hello World 26</p> <p>Hello World 27</p> </div> </div> </body> </html> I don't know where I am messing up, but it simply refuses to work. Any suggestions?

  Read the article

• Can't launch Oneiric x64 instance on Eucalyptus

  - by Bruno Reis

  EDIT: after many hours, I've found out that the problem has nothing to do with Eucalyptus. It looks like the image is buggy. Very, very buggy. More details in the end. I didn't manage to fix it, and I will file a bug. EDIT 2: I managed to fix it, it apparently works. I have a 4-machine cluster running Ubuntu Server Natty (11.04) x64. I've installed "Ubuntu Enterprise Cloud" from the installtion CD (then updated it) on each of these machines. The cloud seems to work fine, I have lots of virtual machines running Natty servers on them. Now I'd like to run Oneiric in a virtual machine, but somehow I can't. I downloaded Oneiric's (x64) image from http://cloud-images.ubuntu.com/oneiric/current/, published it (uec-publish-tarball oneiric-server-cloudimg-amd64.tar.gz oneiric-server-cloudimg-amd64) exactly as I did with Natty, then tried to launch an instance (euca-run-instances -n 1 -k my-key -t m1.small -z my-cloud emi-XXXXXXXX) using Oneiric's image, but the instance is not able to boot. With euca-get-console-output I get the following: [ 0.461269] VFS: Cannot open root device "sda1" or unknown-block(0,0) [ 0.462388] Please append a correct "root=" boot option; here are the available partitions: [ 0.463855] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0) [ 0.465331] Pid: 1, comm: swapper Not tainted 3.0.0-13-generic #22-Ubuntu [ 0.466526] Call Trace: [ 0.466989] [<ffffffff815d3ee5>] panic+0x91/0x194 [ 0.467860] [<ffffffff81ad1031>] mount_block_root+0xdc/0x18e [ 0.468891] [<ffffffff81ad126a>] mount_root+0x54/0x59 [ 0.469829] [<ffffffff81ad13dc>] prepare_namespace+0x16d/0x1a7 [ 0.470883] [<ffffffff81ad0d76>] kernel_init+0x140/0x145 [ 0.471837] [<ffffffff815f38e4>] kernel_thread_helper+0x4/0x10 [ 0.472889] [<ffffffff81ad0c36>] ? start_kernel+0x3df/0x3df [ 0.473884] [<ffffffff815f38e0>] ? gs_change+0x13/0x13 The filesystem is labeled "cloudimg-rootfs", inside the image both /etc/fstab and /boot/grub/grub.cfg always refer to the image by the label, everything seems to be correct, yet the kernel says it can't find the root file system. I've spent many hours googling, but nothing came out. I've asked on #ubuntu-server, but nobody knew what to do. I've asked on #eucalyptus but got no answer at all. Any ideas on why this is happening and how to solve it? Thanks EDIT: after many hours, I've found out that the problem has nothing to do with Eucalyptus. It looks like the image is buggy. Very, very buggy. The first problem is that the Kernel in the image is a -generic kernel, while I suppose it should be a -virtual one. I chrooted into the image, removed the -generic packages, replaced it with the -virtual ones. Then I extracted the new kernel (and replaced the original one (-generic) that came with the tarball) because I need it when I publish and launch an image with Eucalyptus. The problem described above was solved. But then, the console started showing this: mount: mount point ext4 does not exist If you check the /etc/fstab file in the image, it says: LABEL=cloudimg-rootfs ext4 defaults 0 1 Damnt, where's my mount point? Note that it is missing /proc as well. Well, when you think it is over, you will notice that your instance will have no network connectivity. Let's check /etc/network/interface: # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback Oh my! It is missing eth0... here I stopped. I can't take no more. I give up. Looks like Canonical has just forgotten to properly set up this image. At first, I though: "have I downloaded a server image by mistake?", but no, I double checked. It is really the cloud image, it has even "cloud-init" installed (which is not, by default, on server images). They just forgot to prepare it. I will file a bug (and reference it here once this is done), and hope they fix it soon! EDIT 2: it looks like the network configuration was the last thing missing. I decided to test it with the fixes above, and it booted properly! However, I haven't got the slightest idea if the image is now good to go...

  Read the article

• Vista/7: How to get glass color?

  - by Ian Boyd

  How do you use DwmGetColorizationColor? The documentation says it returns two values: a 32-bit 0xAARRGGBB containing the color used for glass composition a boolean parameter that is true "if the color is an opaque blend" (whatever that means) Here's a color that i like, a nice puke green: You can notice the color is greeny, and the translucent title bar (against a white background) shows the snot color very clearly: i try to get the color from Windows: DwmGetColorizationColor(dwCcolorization, bIsOpaqueBlend); And i get dwColorization: 0x0D0A0F04 bIsOpaqueBlend: false According to the documentation this value is of the format AARRGGBB, and so contains: AA: 0x0D (13) RR: 0x0A (10) GG: 0x0F (15) BB: 0x04 (4) This supposedly means that the color is (10, 15, 4), with an opacity of ~5.1%. But if you actually look at this RGB value, it's nowhere near my desired snot green. Here is (10, 15, 4) with zero opacity (the original color), and (10,15,4) with 5% opacity against a white/checkerboard background: So the question is: How to get glass color in Windows Vista/7? i tried using DwmGetColorizationColor, but that doesn't work very well. A person with same problem, but a nicer shiny picture to attract you squirrels: So, it boils down to – DwmGetColorizationColor is completely unusable for applications attempting to apply the current color onto an opaque surface. i love this guy's screenshots much better than mine. Using his screenshots as a template, i made up a few more sparklies: For the last two screenshots, the alpha blended chip is a true partially transparent PNG, blending to your browser's background. Cool! (i'm such a geek) Edit 2: Had to arrange them in rainbow color. (i'm such a geek) Edit 3: Well now i of course have to add Yellow. Undocumented/Unsupported/Fragile Workarounds There is an undocumented export from DwmApi.dll at entry point 137, which we'll call DwmGetColorizationParameters: HRESULT GetColorizationParameters_Undocumented(out DWMCOLORIZATIONPARAMS params); struct DWMCOLORIZATIONPARAMS { public UInt32 ColorizationColor; public UInt32 ColorizationAfterglow; public UInt32 ColorizationColorBalance; public UInt32 ColorizationAfterglowBalance; public UInt32 ColorizationBlurBalance; public UInt32 ColorizationGlassReflectionIntensity; public UInt32 ColorizationOpaqueBlend; } We're interested in the first parameter: ColorizationColor. We can also read the value out of the registry: HKEY_CURRENT_USER\Software\Microsoft\Windows\DWM ColorizationColor: REG_DWORD = 0x6614A600 So you pick your poison of creating appcompat issues. You can rely on an undocumented API (which is bad, bad, bad, and can go away at any time) use an undocumented registry key (which is also bad, and can go away at any time) See also Is there a list of valid parameter combinations for GetThemeColor / Visual Styles API How does Windows change Aero Glass color? DWM - Colorization Color Handling Using DWMGetColorizationColor Retrieving Aero Glass base color for opaque surface rendering i've been wanting to ask this question for over a year now. i always knew that it's impossible to answer, and that the only way to get anyone to actually pay attention is to have colorful screenshots; developers are attracted to shiny things. But on the downside it means i had to put all kinds of work into making the lures.

  Read the article

• Compiler issues on VC++ 2008 Express, Seemingly correct code throws errors.

  - by Anthony Clever

  Hi there, I've been trying to get back into coding for a while, so I figured I'd start with some simple SDL, now, without the file i/o, this compiles fine, but when I throw in the stdio code, it starts throwing errors. This I'm not sure about, I don't see any problem with the code itself, however, like I said, I might as well be a newbie, and figured I'd come here to get someone with a little more experience with this type of thing to look at it. I guess my question boils down to: "Why doesn't this compile under Microsoft's Visual C++ 2008 Express?" I've attached the error log at the bottom of the code snippet. Thanks in advance for any help. #include "SDL/SDL.h" #include "stdio.h" int main(int argc, char *argv[]) { FILE *stderr; FILE *stdout; stderr = fopen("stderr", "wb"); stdout = fopen("stdout", "wb"); SDL_Init(SDL_INIT_EVERYTHING); fprintf(stdout, "SDL INITIALIZED SUCCESSFULLY\n"); SDL_Quit(); fprintf(stderr, "SDL QUIT.\n"); fclose(stderr); fclose(stdout); return 0; } /* 1>------ Build started: Project: opengl_crap, Configuration: Debug Win32 ------ 1>Compiling... 1>main.cpp 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(6) : error C2090: function returns array 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(6) : error C2528: '__iob_func' : pointer to reference is illegal 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(6) : error C2556: 'FILE ***__iob_func(void)' : overloaded function differs only by return type from 'FILE *__iob_func(void)' 1> c:\program files\microsoft visual studio 9.0\vc\include\stdio.h(132) : see declaration of '__iob_func' 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(7) : error C2090: function returns array 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(7) : error C2528: '__iob_func' : pointer to reference is illegal 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(9) : error C2440: '=' : cannot convert from 'FILE *' to 'FILE ***' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(10) : error C2440: '=' : cannot convert from 'FILE *' to 'FILE ***' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(13) : error C2664: 'fprintf' : cannot convert parameter 1 from 'FILE ***' to 'FILE *' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(15) : error C2664: 'fprintf' : cannot convert parameter 1 from 'FILE ***' to 'FILE *' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(17) : error C2664: 'fclose' : cannot convert parameter 1 from 'FILE ***' to 'FILE *' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>c:\documents and settings\owner\my documents\visual studio 2008\projects\opengl_crap\opengl_crap\main.cpp(18) : error C2664: 'fclose' : cannot convert parameter 1 from 'FILE ***' to 'FILE *' 1> Types pointed to are unrelated; conversion requires reinterpret_cast, C-style cast or function-style cast 1>Build log was saved at "file://c:\Documents and Settings\Owner\My Documents\Visual Studio 2008\Projects\opengl_crap\opengl_crap\Debug\BuildLog.htm" 1>opengl_crap - 11 error(s), 0 warning(s) ========== Build: 0 succeeded, 1 failed, 0 up-to-date, 0 skipped ========== */

  Read the article

< Previous Page | 342 343 344 345 346 347 348 349 350 351 352 353  | Next Page >