Search Results

Search found 8896 results on 356 pages for 'jason block'.

Page 35/356 | < Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >

• Does image block (firefox addon) save internet bandwidth usage?

  - by dkjain

  Does image block save internet bandwidth usage. I have a data capped plan from my ISP ( 5GB at 2mbps and thereafter 256 kpbs / pm). I doubt if the addon or other similar addon actually saves bandwidht. Here is my point of view, pls correct if that is wrong. When a request is sent to the server, the server sends out whatever page it's requested to serve with all its text and images etc. So essentially my ISP has made his pipe available for the data to reach me thus he would count those bytes under my data plan. When the data arrives it's all first stored to my browser cache (folder) area which means all the data has actually been received by me/computer using my ISP's pipe. The browser then fetches those data from the cache and displays it. By hitting the stop button or blocking images via ur addon I am just choosing not to display the data which would remain in the cache or eventually be discarded if still on the network pipe after a timeout limit. The point is the data request have been completed by the ISP and so the data would be metered and thus using addon such as image block or hitting stop button while page is loading does not in any way save internet bandwidth. Your comments plz....... Regards dk.

  Read the article

• Howto: Block visible only if node X is published?

  - by romandor

  With this code I show node in block: print check_markup(node_load(777, NULL, TRUE) -> body); Problem: block displayed even node 777 is unpublished. Thank you in advance!

  Read the article

• XmlWriter: is calling Close() required if using a using block?

  - by P a u l

  Is it sufficient to create an XmlWriter with a using block (with no call to Close()) or is it better to use a try/finally block and call Close() in finally?

  Read the article

• Queued Loadtest to remove Concurrency issues using Shared Data Service in OpenScript

  - by stefan.thieme(at)oracle.com

  Queued Processing to remove Concurrency issues in Loadtest ScriptsSome scripts act on information returned by the server, e.g. act on first item in the returned list of pending tasks/actions. This may lead to concurrency issues if the virtual users simulated in a load test scenario are not synchronized in some way.As the load test cases should be carried out in a comparable and straight forward manner simply cancel a transaction in case a collision occurs is clearly not an option. In case you increase the number of virtual users this approach would lead to a high number of requests for the early steps in your transaction (e.g. login, retrieve list of action points, assign an action point to the virtual user) but later steps would be rarely visited successfully or at all, depending on the application logic.A way to tackle this problem is to enqueue the virtual users in a Shared Data Service queue. Only the first virtual user in this queue will be allowed to carry out the critical steps (retrieve list of action points, assign an action point to the virtual user) in your transaction at any one time.Once a virtual user has passed the critical path it will dequeue himself from the head of the queue and continue with his actions. This does theoretically allow virtual users to run in parallel all steps of the transaction which are not part of the critical path.In practice it has been seen this is rarely the case, though it does not allow adding more than N users to perform a transaction without causing delays due to virtual users waiting in the queue. N being the time of the total transaction divided by the sum of the time of all critical steps in this transaction.While this problem can be circumvented by allowing multiple queues to act on individual segments of the list of actions, e.g. per country filter, ends with 0..9 filter, etc.This would require additional handling of these additional queues of slots for the virtual users at the head of the queue in order to maintain the mutually exclusive access to the first element in the list returned by the server at any one time of the load test. Such an improved handling of multiple queues and/or multiple slots is above the subject of this paper.Shared Data Services Pre-RequisitesStart WebLogic Server to host Shared Data ServicesYou will have to make sure that your WebLogic server is installed and started. Shared Data Services may not work if you installed only the minimal installation package for OpenScript. If however you installed the default package including OLT and OTM, you may follow the instructions below to start and verify WebLogic installation.To start the WebLogic Server deployed underneath of Oracle Load Testing and/or Oracle Test Manager you can go to your Start menu, Oracle Application Testing Suite and select the Restart Oracle Application Testing Suite Application Service entry from the Tools submenu.To verify the service has been started you can run the Microsoft Management Console for Services by Selecting Run from the Start Menu and entering services.msc. Look for the entry that reads Oracle Application Testing Suite Application Service, once it has changed it status from Starting to Started you can proceed to verify the login. Please note that this may take several minutes, I would say up to 10 minutes depending on the strength of your CPU horse-power.Verify WebLogic Server user credentialsYou will have to make sure that your WebLogic Server is installed and started. Next open the Oracle WebLogic Server Adminstration Console on http://localhost:8088/console.It may take a while until the application is deployed and started. It may display the following until the Administration Console has been deployed on the fly.Afterwards you can login using the username oats and the password that you selected during install time for your Application Testing Suite administrative purposes.This will bring up the Home page of you WebLogic Server. You have actually verified that you are able to login with these credentials already. However if you want to check the details, navigate to Security Realms, myrealm, Users and Groups tab.Here you could add users to your WebLogic Server which could be used in the later steps. Details on the Groups required for such a custom user to work are exceeding this quick overview and have to be selected with the WebLogic Server Adminstration Guide in mind.Shared Data Services pre-requisites for Load testingOpenScript Preferences have to be set to enable Encryption and provide a default Shared Data Service Connection for Playback.These are pre-requisites you want to use for load testing with Shared Data Services.Please note that the usage of the Connection Parameters (individual directive in the script) for Shared Data Services did not playback reliably in the current version 9.20.0370 of Oracle Load Testing (OLT) and encryption of credentials still seemed to be mandatory as well.General Encryption settingsSelect OpenScript Preferences from the View menu and navigate to the General, Encryption entry in the tree on the left. Select the Encrypt script data option from the list and enter the same password that you used for securing your WebLogic Server Administration Console.Enable global shared data access credentialsSelect OpenScript Preferences from the View menu and navigate to the Playback, Shared Data entry in the tree on the left. Enable the global shared data access credentials and enter the Address, User name and Password determined for your WebLogic Server to host Shared Data Services.Please note, that you may want to replace the localhost in Address with the hosts realname in case you plan to run load tests with Loadtest Agents running on remote systems.Queued Processing of TransactionsEnable Shared Data Services Module in Script PropertiesThe Shared Data Services Module has to be enabled for each Script that wants to employ the Shared Data Service Queue functionality in OpenScript. It can be enabled under the Script menu selecting Script Properties. On the Script Properties Dialog select the Modules section and check Shared Data to enable Shared Data Service Module for your script. Checking the Shared Data Services option will effectively add a line to your script code that adds the sharedData ScriptService to your script class of IteratingVUserScript.@ScriptService oracle.oats.scripting.modules.sharedData.api.SharedDataService sharedData;Record your scriptRecord your script as usual and then add the following things for Queue handling in the Initialize code block, before the first step and after the last step of your critical path and in the Finalize code block.The java code to be added at individual locations is explained in the following sections in full detail.Create a Shared Data Queue in InitializeTo create a Shared Data Queue go to the Java view of your script and enter the following statements to the initialize() code block.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);This will create an instantiation of the Shared Data Queue object named queueA which is maintained for upto 120 minutes.If you want to use the code for multiple scripts, make sure to use a different queue name for each one here and in the subsequent steps. You may even consider to use a dynamic queueName based on filters of your result list being concurrently accessed.Prepare a unique id for each IterationIn order to keep track of individual virtual users in our queue we need to create a unique identifier from the virtual user id and the used username right after retrieving the next record from our databank file.getDatabank("Usernames").getNextDatabankRecord();getVariables().set("usernameValue1","VU_{{@vuid}}_{{@iterationnum}}_{{db.Usernames.Username}}_{{@timestamp}}_{{@random(10000)}}");String usernameValue = getVariables().get("usernameValue1");info("Now running virtual user " + usernameValue);As you can see from the above code block, we have set the OpenScript variable usernameValue1 to VU_{{@vuid}}_{{@iterationnum}}_{{db.Usernames.Username}}_{{@timestamp}}_{{@random(10000)}} which is a concatenation of the virtual user id and the iterationnumber for general uniqueness; as well as the username from our databank, the timestamp and a random number for making it further unique and ease spotting of errors.Not all of these fields are actually required to make it really unique, but adding the queue name may also be considered to help troubleshoot multiple queues.The value is then retrieved with the getVariables.get() method call and assigned to the usernameValue String used throughout the script.Please note that moving the getDatabank("Usernames").getNextDatabankRecord(); call to the initialize block was later considered to remove concurrency of multiple virtual users running with the same userid and therefor accessing the same "My Inbox" in step 6. This will effectively give each virtual user a userid from the databank file. Make sure you have enough userids to remove this second hurdle.Enqueue and attend Queue before Critical PathTo maintain the right order of virtual users being allowed into the critical path of the transaction the following pseudo step has to be added in front of the first critical step. In the case of this example this is right in front of the step where we retrieve the list of actions from which we select the first to be assigned to us.beginStep("[0] Waiting in the Queue", 0);{info("Enqueued virtual user " + usernameValue + " at the end of queueA");sharedData.offerLast("queueA", usernameValue);info("Wait until the user is the first in queueA");String queueValue1 = null;do {// we wait for at least 0.7 seconds before we check the head of the// queue. This is the time it takes one user to move through the// critical path, i.e. pass steps [5] Enter country and [6] Assign// to meThread.sleep(700);queueValue1 = (String) sharedData.peekFirst("queueA");info("The first user in queueA is currently: '" + queueValue1 + "' " + queueValue1.getClass() + " length " + queueValue1.length() );info("The current user is '"+ usernameValue + "' " + usernameValue.getClass() + " length " + usernameValue.length() + ": indexOf " + usernameValue.indexOf(queueValue1) + " equals " + usernameValue.equals(queueValue1) );} while ( queueValue1.indexOf(usernameValue) < 0 );info("Now the user is the first in queueA");}endStep();This will enqueue the username to the tail of our Queue. It will will wait for at least 700 milliseconds, the time it takes for one user to exit the critical path and then compare the head of our queue with it's username. This last step will be repeated while the two are not equal (indexOf less than zero). If they are equal the indexOf will yield a value of zero or larger and we will perform the critical steps.Dequeue after Critical PathAfter the virtual user has left the critical path and complete its last step the following code block needs to dequeue the virtual user. In the case of our example this is right after the action has been actually assigned to the virtual user. This will allow the next virtual user to retrieve the list of actions still available and in turn let him make his selection/assignment.info("Get and remove the current user from the head of queueA");String pollValue1 = (String) sharedData.pollFirst("queueA");The current user is removed from the head of the queue. The next one will now be able to match his username against the head of the queue.Clear and Destroy Queue for FinishWhen the script has completed, it should clear and destroy the queue. This code block can be put in the finish block of your script and/or in a separate script in order to clear and remove the queue in case you have spotted an error or want to reset the queue for some reason.info("Clear queueA");sharedData.clearQueue("queueA");info("Destroy queueA");sharedData.destroyQueue("queueA");The users waiting in queueA are cleared and the queue is destroyed. If you have scripts still executing they will be caught in a loop.I found it better to maintain a separate Reset Queue script which contained only the following code in the initialize() block. I use to call this script to make sure the queue is cleared in between multiple Loadtest runs. This script could also even be added as the first in a larger scenario, which would execute it only once at very start of the Loadtest and make sure the queues do not contain any stale entries.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);info("Clear queueA");sharedData.clearQueue("queueA");This will create a Shared Data Queue instance of queueA and clear all entries from this queue.Monitoring QueueWhile creating the scripts it was useful to monitor the contents, i.e. the current first user in the Queue. The following code block will make sure the Shared Data Queue is accessible in the initialize() block.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);In the run() block the following code will continuously monitor the first element of the Queue and write an informational message with the current username Value to the Result window.info("Monitor the first users in queueA");String queueValue1 = null;do {queueValue1 = (String) sharedData.peekFirst("queueA");if (queueValue1 != null)info("The first user in queueA is currently: '" + queueValue1 + "' " + queueValue1.getClass() + " length " + queueValue1.length() );} while ( true );This script can be run from OpenScript parallel to a loadtest performed by the Oracle Load Test.However it is not recommend to run this in a production loadtest as the performance impact is unknown. Accessing the Queue's head with the peekFirst() method has been reported with about 2 seconds response time by both OpenScript and OTL. It is advised to log a Service Request to see if this could be lowered in future releases of Application Testing Suite, as the pollFirst() and even offerLast() writing to the tail of the Queue usually returned after an average 0.1 seconds.Debugging QueueWhile debugging the scripts the following was useful to remove single entries from its head, i.e. the current first user in the Queue. The following code block will make sure the Shared Data Queue is accessible in the initialize() block.info("Create queueA with life time of 120 minutes");sharedData.createQueue("queueA", 120);In the run() block the following code will remove the first element of the Queue and write an informational message with the current username Value to the Result window.info("Get and remove the current user from the head of queueA");String pollValue1 = (String) sharedData.pollFirst("queueA");info("The first user in queueA was currently: '" + pollValue1 + "' " + pollValue1.getClass() + " length " + pollValue1.length() );ReferencesOracle Functional Testing OpenScript User's Guide Version 9.20 [E15488-05]Chapter 17 Using the Shared Data Modulehttp://download.oracle.com/otn/nt/apptesting/oats-docs-9.21.0030.zipOracle Fusion Middleware Oracle WebLogic Server Administration Console Online Help 11g Release 1 (10.3.4) [E13952-04]Administration Console Online Help - Manage users and groupshttp://download.oracle.com/docs/cd/E17904_01/apirefs.1111/e13952/taskhelp/security/ManageUsersAndGroups.htm

  Read the article

• They may block off Howard Street—but Oracle OpenWorld is a two-way street.

  - by Oracle Accelerate for Midsize Companies

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 by Jim Lein, Sr. Director, Oracle Accelerate for Midsize Companies “Engineered to Inform and Inspire”—that’s the theme of Oracle OpenWorld 2012. In early October, tens of thousands of attendees will descend on the streets of San Francisco because they share one thing in common: the desire to learn more about Oracle. You might think that’s the way we, Oracle employees, look at this event—as just another opportunity for attendees to learn about what we do. But it’s really a two way street. Every year I’m amazed by how informed and inspired I am by our customers and their companies. Midsize companies buy Oracle to grow. As part of the Oracle Accelerate for Midsize Companies team I get to talk with our partners and business leaders at growing companies almost every day, usually via phone. Oracle OpenWorld presents the perfect opportunity to meet some of them in person, in an informal setting, and in one of the most beautiful cities in the world. The stories our customers tell me about their businesses provide vivid examples of how they have overcome the challenges of managing increasingly complex global operations and growing during uncertain economic conditions. It’s no secret that my favorite session at Oracle OpenWorld (besides Larry Ellison’s keynotes and the Customer Appreciation Event, of course) is the Oracle Accelerate Customer Panel. This year we’re featuring executives from three companies who deployed Oracle ERP rapidly to support their company’s growth: Chris Powell, VP and Corporate Controller of Beats by Dr. Dre, a California based designer and manufacturer of premium headphones (sorry, no free samples), Iñaki Zuazo, CIO of Industrias Juno, a building materials provider based in Spain, Kamran Moosa, Project Coordinator for Spartan Engineering, a provider of engineering and construction support services for an LPG storage project in Texas, and That’s a pretty diverse lineup and it will be interesting to hear the perspectives of both IT and financial project stakeholders. The session, “Oracle Accelerate Customer Case Studies: Rapid Deployment of Oracle Applications”, is at 3:30 pm on Wednesday, October 3, in the Concert room at the Palace Hotel. Oracle loves our hometown of San Francisco and it’s a great place to host Oracle OpenWorld. It’s now San Francisco’s largest conference and the city closes off Howard Street to better accommodate the attendees. Some Bay Area commuters may be inconvenienced for a few days by this closure but the conference brings about $100 million into the local economy. Now that’s a two-way street. More Oracle Accelerate at Oracle OpenWorld “Faster, Better, Cheaper Application Deployment with Oracle Business Accelerators”, Monday, October 1st, 10:45 a.m., Moscone West Room 3016 “Oracle Accelerate and Oracle Business Accelerators for Midsize Companies”, (partners only), Wednesday, October 3, 10:15 a.m., Marriott – Golden Gate B Visit the Oracle Accelerate and Oracle Business Accelerator Kiosk in the Moscone West Exhibit Grounds Download the Focus On Oracle Accelerate for Midsize Companies Focus document /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";}

  Read the article

• How can I block abusive bots from accessing my Heroku app?

  - by aem

  My Heroku (Bamboo) app has been getting a bunch of hits from a scraper identifying itself as GSLFBot. Googling for that name produces various results of people who've concluded that it doesn't respect robots.txt (eg, http://www.0sw.com/archives/96). I'm considering updating my app to have a list of banned user-agents, and serving all requests from those user-agents a 400 or similar and adding GSLFBot to that list. Is that an effective technique, and if not what should I do instead? (As a side note, it seems weird to have an abusive scraper with a distinctive user-agent.)

  Read the article

• How does Minecraft compute lighting for it's non-block objects?

  - by Darestium

  I was wondering how the creator of Minecraft went about lighting the objects (player and pickaxe) based on the lighting level around the player. I have implemented the ability to light the blocks around the player but I can't really think of anyway to implement with objects. Also, when I the player moves and the lighting values change will I have to rebuild it's vertexbuffers? Or is there some other way? Any ideas?

  Read the article

• New ways for backup, recovery and restore of Essbase Block Storage databases – part 2 by Bernhard Kinkel

  - by Alexandra Georgescu

  After discussing in the first part of this article new options in Essbase for the general backup and restore, this second part will deal with the also rather new feature of Transaction Logging and Replay, which was released in version 11.1, enhancing existing restore options. Tip: Transaction logging and replay cannot be used for aggregate storage databases. Please refer to the Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1). Even if backups are done on a regular, frequent base, subsequent data entries, loads or calculations would not be reflected in a restored database. Activating Transaction Logging could fill that gap and provides you with an option to capture these post-backup transactions for later replay. The following table shows, which are the transactions that could be logged when Transaction Logging is enabled: In order to activate its usage, corresponding statements could be added to the Essbase.cfg file, using the TRANSACTIONLOGLOCATION command. The complete syntax reads: TRANSACTIONLOGLOCATION [ appname [ dbname]] LOGLOCATION NATIVE ?ENABLE | DISABLE Where appname and dbname are optional parameters giving you the chance in combination with the ENABLE or DISABLE command to set Transaction Logging for certain applications or databases or to exclude them from being logged. If only an appname is specified, the setting applies to all databases in that particular application. If appname and dbname are not defined, all applications and databases would be covered. LOGLOCATION specifies the directory to which the log is written, e.g. D:\temp\trlogs. This directory must already exist or needs to be created before using it for log information being written to it. NATIVE is a reserved keyword that shouldn’t be changed. The following example shows how to first enable logging on a more general level for all databases in the application Sample, followed by a disabling statement on a more granular level for only the Basic database in application Sample, hence excluding it from being logged. TRANSACTIONLOGLOCATION Sample Hyperion/trlog/Sample NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Basic Hyperion/trlog/Sample NATIVE DISABLE Tip: After applying changes to the configuration file you must restart the Essbase server in order to initialize the settings. A maybe required replay of logged transactions after restoring a database can be done only by administrators. The following options are available: In Administration Services selecting Replay Transactions on the right-click menu on the database: Here you can select to replay transactions logged after the last replay request was originally executed or after the time of the last restored backup (whichever occurred later) or transactions logged after a specified time. Or you can replay transactions selectively based on a range of sequence IDs, which can be accessed using Display Transactions on the right-click menu on the database: These sequence ID s (0, 1, 2 … 7 in the screenshot below) are assigned to each logged transaction, indicating the order in which the transaction was performed. This helps to ensure the integrity of the restored data after a replay, as the replay of transactions is enforced in the same order in which they were originally performed. So for example a calculation originally run after a data load cannot be replayed before having replayed the data load first. After a transaction is replayed, you can replay only transactions with a greater sequence ID. For example, replaying the transaction with sequence ID of 4 includes all preceding transactions, while afterwards you can only replay transactions with a sequence ID of 5 or greater. Tip: After restoring a database from a backup you should always completely replay all logged transactions, which were executed after the backup, before executing new transactions. But not only the transaction information itself needs to be logged and stored in a specified directory as described above. During transaction logging, Essbase also creates archive copies of data load and rules files in the following default directory: ARBORPATH/app/appname/dbname/Replay These files are then used during the replay of a logged transaction. By default Essbase archives only data load and rules files for client data loads, but in order to specify the type of data to archive when logging transactions you can use the command TRANSACTIONLOGDATALOADARCHIVE as an additional entry in the Essbase.cfg file. The syntax for the statement is: TRANSACTIONLOGDATALOADARCHIVE [appname [dbname]] [OPTION] While to the [appname [dbname]] argument the same applies like before for TRANSACTIONLOGLOCATION, the valid values for the OPTION argument are the following: Make the respective setting for which files copies should be logged, considering from which location transactions are usually taking place. Selecting the NONE option prevents Essbase from saving the respective files and the data load cannot be replayed. In this case you must first manually load the data before you can replay the transactions. Tip: If you use server or SQL data and the data and rules files are not archived in the Replay directory (for example, you did not use the SERVER or SERVER_CLIENT option), Essbase replays the data that is actually in the data source at the moment of the replay, which may or may not be the data that was originally loaded. You can find more detailed information in the following documents: Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1) Oracle Essbase Online Documentation (rel. 11.1.2.1)) Enterprise Performance Management System Documentation (including previous releases) Or on the Oracle Technology Network. If you are also interested in other new features and smart enhancements in Essbase or Hyperion Planning stay tuned for coming articles or check our training courses and web presentations. You can find general information about offerings for the Essbase and Planning curriculum or other Oracle-Hyperion products here; (please make sure to select your country/region at the top of this page) or in the OU Learning paths section, where Planning, Essbase and other Hyperion products can be found under the Fusion Middleware heading (again, please select the right country/region). Or drop me a note directly: [email protected]. About the Author: Bernhard Kinkel started working for Hyperion Solutions as a Presales Consultant and Consultant in 1998 and moved to Hyperion Education Services in 1999. He joined Oracle University in 2007 where he is a Principal Education Consultant. Based on these many years of working with Hyperion products he has detailed product knowledge across several versions. He delivers both classroom and live virtual courses. His areas of expertise are Oracle/Hyperion Essbase, Oracle Hyperion Planning and Hyperion Web Analysis. Disclaimer: All methods and features mentioned in this article must be considered and tested carefully related to your environment, processes and requirements. As guidance please always refer to the available software documentation. This article does not recommend or advise any explicit action or change, hence the author cannot be held responsible for any consequences due to the use or implementation of these features.

  Read the article

• How to block the ASP.NET page while ajax UpdateProgress is being displayed.

  Step 1: Copy the following styles to your aspx page. <style type="text/css">       .hide       {           display: none;       }       .show       {           display: inherit;       }        .progressBackgroundFilter       {           position: absolute;           top: 0px;           bottom: 0px;           left: 0px;           right: 0px;           overflow: hidden;           padding: 0;           margin: 0;           background-color: #000;           filter: alpha(opacity=50);           opacity: 0.5;           z-index: 1000;       }       .processMessage       {           position: absolute;           font-family:Verdana;           font-size:12px;           font-weight:normal;           color:#000066;           top: 30%;           left: 43%;           padding: 10px;           width: 18%;           z-index: 1001;           background-color: #fff;       }   </style> Step 2: Put the divs as shown below in UpdateProgress control. <asp:UpdateProgress ID="updPrgsBaselineTab" runat="server">        <ProgressTemplate>            <div id="progressBackgroundFilter" class="progressBackgroundFilter">            </div>            <div id="processMessage" class="processMessage">                <table width="100%">                    <tr style="width: 100%">                        <td style="width: 100%">                            Please Wait..........                        </td>                    </tr>                    <tr style="width: 100%">                        <td style="width: 100%" align="center">                            <img src="../Images/Update_Progress.gif" />                        </td>                    </tr>                </table>            </div>        </ProgressTemplate>    </asp:UpdateProgress> span.fullpost {display:none;}

  Read the article

• I'm building a theme for tumblr and the {HasPages} doesn't seem to work properly.

  - by Muhammad

  I've put the HTML draft of the theme so far, with minor CSS edits. Currently I have all the block posts and everything else that's essential to a tumblr theme but I can't seem to get the {HasPages} block to work properly. I've tested it on a different tumblr, also. There are pages created and I already have provided some basic CSS for it just in case. But there isn't anything showing up. Has anyone has this problem and if so, is there a solution I'm missing? The code to display the pages is included. {block:HasPages} <ul> <li><a href="/">Home</a></li> {block:Pages}<li><a href="{URL}">{Label}</a></li>{/block:Pages} </ul> {/block:HasPages} Also, is this a valid web masters' question. I'm not sure.

  Read the article

• Android Java rectangle collision detection not working

  - by Charlton Santana

  I had been hard coding a collision detection system which was buggy. Then I came across using rectangles for collsion detection. So I put it all in and it does not work, I put a log in and it never logged. Note to Java programmers who are not Android programers: Android uses the word Rect instead of Rectangle. Code for Block.java: public Rect getBounds(){ return new Rect (this.x, this.y, 10, 20); } Code for Sprite.java: public Rect getBounds(){ return new Rect (this.x, this.y, 20, 20); } Code for MainGame.java: for(Block block : BLOCKS) { block.draw(canvas); block.rigidbody(); Rect spriter = sprite.getBounds(); Rect blockr = block.getBounds(); if(spriter.intersect(blockr)){ showgameover = 1; Log.d(TAG, "Game Over"); } } Is anyone able to help?

  Read the article

• What dangers await if I block non-standard, non-major-usa search engine bots from my USA only website?

  - by Ryan

  I noticed tons of bandwidth being used by non-USA search engine bots, so I began blocking them in an effort to save bandwidth and cpu cycles for actual users and the search engines they come from (Google, Bing, Yahoo, Ask, etc.). Other than potentially losing some international traffic (which isn't really important to us since all of our content is very USA-centric), what additional dangers should I be concerned about? I'm using a modified version of Jeff Starr's User Agent Blocklist

  Read the article

• How to block FeedReader from fetching my content to their site?

  - by Wei Kai

  As you all can see from the picture below, my site's content is duplicated by FeedReader and indexed at Google. When I clicked at the FeedReader link, it uses some sort of iFrame to draw content from my site live. This forms some sort of content duplication to me, and I believe it does harm to my site. (Stackoverflow doesn't allow me to post image due to new account, pls click at the link above to see the picture, million thanks to you.) What can I do to prevent Feedreader to fetch my content to their site? I know robots.txt can perform such function, but I don't know how to do it. Any help would be much appreciated. I have also highlighted this issue to FeedReader 2 days ago, but yet to get any reply from them.

  Read the article

• Is having functionality in DB a road block to scalability?

  - by Estefany Velez

  I may not be able to give the right title to the question. But here it is, We are developing financial portal for wealth management. We are expecting over 10000 clients to use the application. The portal calculates various performance analytics based on the the technical analysis of the stock market. We developed lot of the functionality through Stored procedures, user defined functions, triggers etc. through Database. We thought we can gain huge performance boost doing stuff directly in database than through C# code. And we actually did get a huge performance boost. When I tried to brag about the achievement to our CTO, he counter questioned my decision of having functionality implemented in database rather than code. According to him such applications suffer scalability problems. In his words "These days things are kept in memory/cache. Clustered data is hard to manage over time. Facebook, Google have nothing in database. It is the era of thin servers and thick clients. DB is used only to store plain data and functionality should be completely decoupled from the database." Can you guys please give me some suggestions as to whether what he says is right. How to go about architect such an application?

  Read the article

• How to block the ASP.NET page while ajax UpdateProgress is being displayed.

  Step 1: Copy the following styles to your aspx page. <style type="text/css">       .hide       {           display: none;       }       .show       {           display: inherit;       }        .progressBackgroundFilter       {           position: absolute;           top: 0px;           bottom: 0px;           left: 0px;           right: 0px;           overflow: hidden;           padding: 0;           margin: 0;           background-color: #000;           filter: alpha(opacity=50);           opacity: 0.5;           z-index: 1000;       }       .processMessage       {           position: absolute;           font-family:Verdana;           font-size:12px;           font-weight:normal;           color:#000066;           top: 30%;           left: 43%;           padding: 10px;           width: 18%;           z-index: 1001;           background-color: #fff;       }   </style> Step 2: Put the divs as shown below in UpdateProgress control. <asp:UpdateProgress ID="updPrgsBaselineTab" runat="server">        <ProgressTemplate>            <div id="progressBackgroundFilter" class="progressBackgroundFilter">            </div>            <div id="processMessage" class="processMessage">                <table width="100%">                    <tr style="width: 100%">                        <td style="width: 100%">                            Please Wait..........                        </td>                    </tr>                    <tr style="width: 100%">                        <td style="width: 100%" align="center">                            <img src="../Images/Update_Progress.gif" />                        </td>                    </tr>                </table>            </div>        </ProgressTemplate>    </asp:UpdateProgress> span.fullpost {display:none;}

  Read the article

• Is it possible to block traffic originating from a specific country?

  - by mickburkejnr

  Hi guys, My personal website is currently getting a lot of spam comments at the moment, and most of them originate from Russia (I've used Google Analytics to identify the traffic, and a lot of the links link to Russian sites). As it's a pain to keep deleting this comments, I would like to ban people from there commenting or visiting the website. Is this possible? Also, the website is using WordPress. Many thanks!

  Read the article

• "// ..." comments at end of code block after } - good or bad?

  - by gablin

  I've often seen such comments be used: function foo() { ... } // foo while (...) { ... } // while if (...) { ... } // if and sometimes even as far as if (condition) { ... } // if (condition) I've never understood this practice and thus never applied it. If your code is so long that you need to know what this ending } is then perhaps you should consider splitting it up into separate functions. Also, most developers tools are able to jump to the matching bracket. And finally the last is, for me, a clear violation to the DRY principle; if you change the condition you would have to remember to change the comment as well (or else it could get messy for the maintainer, or even for you). So why do people use this? Should we use it, or is it bad practice?

  Read the article

• Platformer Collision Error [closed]

  - by Connor

  I am currently working on a relatively simple platform game that has an odd bug.You start the game by falling onto the ground (you spawn a few blocks above the ground), but when you land your feet get stuck INSIDE the world and you can't move until you jump. Here's what I mean: The player's feet are a few pixels below the ground level. However, this problem only occurs in 3 places throughout the map and only in those 3 select places. I'm assuming that the problem lies within my collision detection code but I'm not entirely sure, as I don't get an error when it happens. public boolean isCollidingWithBlock(Point pt1, Point pt2) { //Checks x for(int x = (int) (this.x / Tile.tileSize); x < (int) (this.x / Tile.tileSize + 4); x++) { //Checks y for(int y = (int) (this.y / Tile.tileSize); y < (int) (this.y / Tile.tileSize + 4); y++) { if(x >= 0 && y >= 0 && x < Component.dungeon.block.length && y < Component.dungeon.block[0].length) { //If the block is not air if(Component.dungeon.block[x][y].id != Tile.air) { //If the player is in contact with point one or two on the block if(Component.dungeon.block[x][y].contains(pt1) || Component.dungeon.block[x][y].contains(pt2)) { //Checks for specific blocks if(Component.dungeon.block[x][y].id == Tile.portalBlock) { Component.isLevelDone = true; } if(Component.dungeon.block[x][y].id == Tile.spike) { Health.health -= 1; Component.isJumping = true; if(Health.health == 0) { Component.isDead = true; } } return true; } } } } } return false; } What I'm asking is how I would fix the problem. I've looked over my code for quite a while and I'm not sure what's wrong with it. Also, if there's a more efficient way to do my collision checking then please let me know! I hope that is enough information, if it's not just tell me what you need and I'll be sure to add it. Thank you! [EDIT] Jump code: if(!isJumping && !isCollidingWithBlock(new Point((int) x + 2, (int) (y + height)), new Point((int) (x + width + 2), (int) (y + height)))) { y += fallSpeed; //sY is the screen's Y. The game is a side-scroller Component.sY += fallSpeed; } else { if(Component.isJumping) { isJumping = true; } } if(isJumping) { if(!isCollidingWithBlock(new Point((int) x + 2, (int) y), new Point((int) (x + width + 2), (int) y))) { if(jumpCount >= jumpHeight) { isJumping = false; jumpCount = 0; } else { y -= jumpSpeed; Component.sY -= jumpSpeed; jumpCount += 1; } } else { isJumping = false; jumpCount = 0; } }

  Read the article

• "// ..." comments at end of code block after } - good or bad?

  - by gablin

  I've often seen such comments be used: function foo() { ... } // foo while (...) { ... } // while if (...) { ... } // if and sometimes even as far as if (condition) { ... } // if (condition) I've never understood this practice and thus never applied it. If your code is so long that you need to know what this ending } is then perhaps you should consider splitting it up into separate functions. Also, most developers tools are able to jump to the matching bracket. And finally the last is, for me, a clear violation to the DRY principle; if you change the condition you would have to remember to change the comment as well (or else it could get messy for the maintainer, or even for you). So why do people use this? Should we use it, or is it bad practice?

  Read the article

• How do I combine the two methods of cryptography, CBC cipher block and Vingenere Chiper [on hold]

  - by Bangpe

  Code Vingenere static String encrypt(String text, final String key) { String res = ""; text = text.toUpperCase(); for (int i = 0, j = 0; i < text.length(); i++) { char c = text.charAt(i); if (c < 'A' || c > 'Z') continue; res += (char)((c + key.charAt(j) - 2 * 'A') % 26 + 'A'); j = ++j % key.length(); } return res; } Code CBC Chiper public CbcBlockCipher( BlockCipher blockCipher ) { super( blockCipher.keySize(), blockCipher.blockSize() ); this.blockCipher = blockCipher; iv = new byte[blockSize()]; zeroBlock( iv ); temp = new byte[blockSize()]; }

  Read the article

• True column-mode (block-selection and editing) text editor solution?

  - by tamale

  In windows, I used to use a text editor called crimson editor which featured the best column-mode editing support I have yet to use. When enabled via a simple Alt-C shortcut, selections could be made with the mouse or cursor keys and they would be visual blocks rather than wrapped-lines. These selections could be deleted, moved, copied, pasted, and all of the operations just made sense. You could also just start typing, and you'd get a column of the characters as you're typing. There are multiple ways of getting parts of the these features working separately discussed on this forum thread, but no one has yet to provide a solution that provides this all-encompassing and easy-to-use method. If someone could point me to a gedit plugin where this work is actively being pursued, perhaps I could help with the coding myself. If someone is aware of a text editor that already provides this full functionality, I'd appreciate the info. Running crimson editor through wine and the close-but-not-quite multi-edit plugin for gedit are the temporary solutions I'm 'getting by with' for the time being.

  Read the article

• iOS Book App with Custom Book Repositories. Will Apple block this? [closed]

  - by BrianHanifin

  I am working with a kindergarten teacher to create an iPad/iPhone app which plays audio of her narrating each page of the "book". She wishes to only share some of the books with students in her class. Can I create a mechanism for downloading books from a custom repository link? I would send the URL home with the kids and have the parents type it into the app. I would include a couple of books preloaded with the app. I could even provide a sample repository with a sample book if you think it would make any difference. I am trying to come up with a creative solution that gives her the app she wants for her students while protecting the privacy she wishes for some of her content. What are your thoughts?

  Read the article

• Question on PL/SQL - Evaluate the PL/SQL block given above and determine the data type and value of each of the following variables [closed]

  - by Annie

  DECLARE v_custid NUMBER(4) := 1600; v_custname VARCHAR2(300) := 'Women Sports Club'; v_ new_custid NUMBER(3) := 500; BEGIN DECLARE v_custid NUMBER(4) := 0; v_custname VARCHAR2(300) := 'Shape up Sports Club'; v_new_custid NUMBER(3) := 300; v_new_custname VARCHAR2(300) := 'Jansports Club'; BEGIN v_custid := v_new_custid; v_custname := v_custname || ' ' || v_new_custname; END; v_custid := (v_custid *12) / 10; END; /

  Read the article

• e2fsck / resize2fs problems

  - by BlakBat

  I've got 6 drives (each 1.5T, all same model and firmware revision) that are part of a RAID5 array. The RAID5 makes a LVM volume group and a logical group. The latter contains only one ext3 partition. I've recently ran: e2fsck -f /dev/vg03/lv01 && resize2fs -M /dev/vg03/lv01 which exited without an error. Now when I try to mount /dev/vg03/lv01 I get: EXT3-fs error (device dm-0): ext3_check_descriptors: Block bitmap for group 30533 not in group (block 1000532368)! EXT3-fs: group descriptors corrupted! How do I get out of this predicament? This is all the info I can currently give you: fdisk -l /dev/sd[cdefgh] shows (correctly) that they are "Linux raid autodetect" but fdisk now shows: fdisk -l /dev/md0 Disk /dev/md0: 7501.5 GB, 7501495664640 bytes ... Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table (instead of a LVM type partition) fdisk -l /dev/vg03/lv01 Disk /dev/vg03/lv01: 7501.5 GB, 7501491732480 bytes ... Disk identifier: 0x00000000 Disk /dev/vg03/lv01 doesn't contain a valid partition table (instead of a ext3 type partition) I've tried: e2fsck -fy /dev/vg03/lv01 e2fsck 1.41.12 (17-May-2010) e2fsck: Group descriptors look bad... trying backup blocks... Block bitmap for group 30533 is not in group. (block 1000532368) Relocate? yes Inode bitmap for group 30533 is not in group. (block 1000532369) Relocate? yes Pass 1: Checking inodes, blocks, and sizes Relocating group 30533's block bitmap to 1000524246... Error allocating 1 contiguous block(s) in block group 30533 for inode bitmap: Could not allocate block in ext2 filesystem e2fsck: aborted Extra information I can give you: cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active (auto-read-only) raid5 sdg1[0] sdh1[5] sdf1[4] sde1[3] sdc1[2] sdd1[1] 7325679360 blocks level 5, 128k chunk, algorithm 2 [6/6] [UUUUUU] bitmap: 1/175 pages [4KB], 4096KB chunk unused devices: Lastly, all smartctl tests (short and extendend) showed no errors on any of the disks. Should I try to resize2fs to grow /dev/vg03/lv01 and redo a e2fsck ? Should I cfdisk /dev/md0 and /dev/vg03/lv01 back to their real types? Thanks in advance for all and any help. 2011-09-20 UPDATE I issued the following commands and was able to remount the partition, but by viewing the size (df) of before and after, it seems that 1Tb of data have gone missing. By checking the MD5SUMS (from an old backup) of some files with the "same" files from the remounted partition, some errors have been detected. Commands issued to remount the partition were: dumpe2fs /dev/vg03/lv01 Block count: 1000491435<br /> Block size: 4096<br /> tune2fs -O ^has_journal /dev/vg03/lv01 resize2fs -p /dev/vg03/lv01 dumpe2fs /dev/vg03/lv01 Block count: 1831418880<br /> Block size: 4096<br /> mount -o ro,noatime /dev/vg03/lv01 /mnt/raid OK... but files have been damaged / gone missing.

  Read the article

• external hard drive is no longer recognized, gives buffer I/O errors

  - by BioGeek

  Hi all, The external hard drive which contains all my photos and where I backed-up all my important documents is no longer recognized. It is a three month old 500GB Iomage Prestige Desktop Hard Drive. When I plug it in, it is recognised as a USB device, because it shows up when I type lsusb, but dmesg gives this error message. [19712.013250] usb 2-2: new high speed USB device using ehci_hcd and address 21 [19712.145347] usb 2-2: configuration #1 chosen from 1 choice [19712.147214] scsi25 : SCSI emulation for USB Mass Storage devices [19712.147514] usb-storage: device found at 21 [19712.147519] usb-storage: waiting for device to settle before scanning [19717.148978] usb-storage: device scan complete [19717.149527] scsi 25:0:0:0: Direct-Access ST350082 0AS PQ: 0 ANSI: 2 CCS [19717.151020] sd 25:0:0:0: Attached scsi generic sg2 type 0 [19717.151685] sd 25:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [19717.160402] sd 25:0:0:0: [sdb] Write Protect is off [19717.160412] sd 25:0:0:0: [sdb] Mode Sense: 34 00 00 00 [19717.160418] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165685] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19717.165691] sdb: sdb1 [19719.171808] sd 25:0:0:0: [sdb] Assuming drive cache: write through [19719.171818] sd 25:0:0:0: [sdb] Attached SCSI disk [19737.430998] sd 25:0:0:0: [sdb] Unhandled sense code [19737.431007] sd 25:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [19737.431016] sd 25:0:0:0: [sdb] Sense Key : Medium Error [current] [19737.431027] sd 25:0:0:0: [sdb] Add. Sense: Unrecovered read error [19737.431038] end_request: I/O error, dev sdb, sector 6160463 [19737.431050] Buffer I/O error on device sdb1, logical block 6160400 [19737.431060] Buffer I/O error on device sdb1, logical block 6160401 [19737.431067] Buffer I/O error on device sdb1, logical block 6160402 [19737.431075] Buffer I/O error on device sdb1, logical block 6160403 [19737.431082] Buffer I/O error on device sdb1, logical block 6160404 [19737.431088] Buffer I/O error on device sdb1, logical block 6160405 [19737.431096] Buffer I/O error on device sdb1, logical block 6160406 [19737.431102] Buffer I/O error on device sdb1, logical block 6160407 [19737.431114] Buffer I/O error on device sdb1, logical block 6160408 [19737.431121] Buffer I/O error on device sdb1, logical block 6160409 [19737.712183] sd 6:0:0:0: [sdb] Unhandled sense code [19737.712191] sd 6:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_SENSE [19737.712200] sd 6:0:0:0: [sdb] Sense Key : Hardware Error [current] [19737.712210] sd 6:0:0:0: [sdb] Add. Sense: No additional sense information [19737.712222] end_request: I/O error, dev sdb, sector 0 [19737.712232] Buffer I/O error on device sdb, logical block 0 Neither does the external drive show when I use fdisk: jeroen@phalacrocorax:~$ sudo fdisk -l [sudo] password for jeroen: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x000341ad Device Boot Start End Blocks Id System /dev/sda1 * 1 18714 150320173+ 83 Linux /dev/sda2 18715 19457 5968147+ 5 Extended /dev/sda5 18715 19457 5968116 82 Linux swap / Solaris` I popped the disk out of the casing put it on a SATA connect internally and then tried the file recovery programs testdisk/photorec and SpinRite, but both failed because they couldn't recognize the external harddisk. Do I have any other options?

  Read the article

< Previous Page | 31 32 33 34 35 36 37 38 39 40 41 42  | Next Page >