Search Results

Search found 19018 results on 761 pages for 'indicator network'.

Page 351/761 | < Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >

• I need to make Windows 7 STOP disabling the wifi adapter when the wired LAN is connected

  - by Escobar Ceaser

  This is a Dell Latitude E6430. There is a setting in the bios to control this behavior and I have DISABLED it but it still happens. I am also running the latest bios. When I plug in a network cable the wifi adapter becomes disabled. I need it to stay enabled. What else could be making this happen? EDIT: The reason I need to do this is because with NETSH WLAN commands you can create a wifi hotspot by sharing the internet connection on the wired adapter and broadcasting a ssid on the virtual wifi nic. I do this all the time but it's not working on this laptop. I'm wondering if it's a network security thing where I am. I'm going to try from my hotel tonight and report back.

  Read the article

• vmware workstation shared vm remote connection

  - by user1875332

  I'm running vmware workstation 9 on a dedicated server so I can connect to my virtual machines from a remote connection using workstation 9 as well. I've gone ahead and shared the VM, but I've searched all over and can't seem to figure out how to connect to the shared vm. What do you put as the Host/IP, user, pass? Is it of the shared vm, or the host vm? Is there some other settings you need to do as well? I'm completely stumped. Most of the videos I see seem to be people using shared vm's on the same network, not a remote network.

  Read the article

• Can i change the subnet on the vpn side of a server without having to change its whole lan (to avoid collission)

  - by Gusty

  Ohai, ive got a xp server with a client connecting via VPN. Problem (as we all know) is that sometimes the subnets clash. Instead of changing the whole server network every time this happens, cant i just have the server appear to have a different subnet to vpn clients? I have no interest in accessing other computers than the server on its LAN. I tried just turning off automatic dhcp in the servers vpn settings and changed it to 172.31.255.x. The client gets the address assigned alright and it can ping 172.31.255.1 but i cannot ping the server name (because the dns on the clients vpn connection points at 192.168.0.1?) wisdom? PS everything worked until the client hit a network with the same subnet as the server lan. thanks

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• Setting primary IP for VPS (out of 2 available)

  - by Flyer

  I've got a little problem. My VPS (Debian box) has 1 primary IP address, but now my hosting provider decided to assign me another one due to problems with first one. Let's say new IP is 91.222.152.20 and old one 91.221.190.170. How should I make 91.222.152.20 primary one, so that everything works on this address instead of 91.221.190.170 (like ftp, mysql etc) I tried editing /etc/newtwork/interfaces setting iface eth1 inet static address 91.222.152.20 netmask 255.255.252.0 network 91.222.152.0 broadcast 91.222.155.255 gateway 91.222.152.1 I know that network is 91.222.152.0/22 so I assume that above configuration should be right. Saved, rebooted and that ended pretty bad. Couldn't even ping box on old or new IP. Had to revert to working one. So question is. What am I doing wrong and how to do it right?

  Read the article

• local wordpress installation not accessible from the outside world

  - by hello

  I have a working installation of wordpress located in /var/www/html/wordpress It is accessible in my local network at [local-machine-ip]/wordpress/ There is also a test page located in /var/www/html/test.html It is also accessible in my local network at [local-machine-ip] I would like the wordpress website to be accessible from the outside world. I know that my ISP blocks incoming requests on port 80, so I set my router to redirect requests from port 8080 to 80. This feature appears to be working correctly since I can access the test.html page using my public ip address as follows: [public-ip]:8080 However, I cannot access [public-ip]:8080/wordpress Here is my Apache config : <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www/html ServerName [my.domain.com] <Directory /var/www/html/> Options FollowSymLinks Indexes MultiViews AllowOverride All Order allow,deny allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined </VirtualHost> Thanks!

  Read the article

• linux static ip problem

  - by out_sider

  I have a serve running centOS and I'd like to have the following setup: The server needs to have a static ip and be accessible by name. What I want is independently of the network being able to connect the server to the network and access it by name on Firefox as it will be running a web page. I tried setting the ip manually but while the inet addr is set as I want it the Bcast isn't. And I only can ping the server on the Bcast ip and because it is 192.168.2.255 ssh says it's not valid.

  Read the article

• Resolving Domainnames differently for different services

  - by mlaug

  Some time ago we had an issue with our network infrastructure and php with curl. Our Network infrastructure is fairly simple. LoadBalancer/Firewall = 5 servers The Domainname of our website is set to the ip of the Loadbalancer, of course. But calling curl from one of the servers did result in a timeout. It appears that a server could not call for its own domain it is serving. So we had to set the domains via /etc/hosts to the sever itself. But now We have implemented a Varnish in front of the Loadbalancer, which we want to automatically purge, once a change on a page happens. So now we need to call the domain www.example.com/url_to_purge. Sadly this call what be resolved to the server itself instead of the varnish, because of the /etc/hosts entries. So now I am wondering, if you could resolve domain names differently for different services :)

  Read the article

• Cannot connect to Internet via Wifi

  - by lvogel

  I have a laptop that's currently configured as a dual-boot. The problem: I cannot connect to the Internet in the home wireless network through Ubuntu in the apartment where I currently live. The strange part: I can connect to it just fine through Windows (as right now), and I can use the Internet through Ubuntu on this computer with all the other wireless networks I have tried. The problem is only with this particular combination. The only possible explanations I can think of are either that this network is WPS, or that it's a driver problem--Vodafone router. The router 'sees' the computer--and it says it's connected; however, I keep getting prompted for a password, and I enter the key that works with Windows, but in Ubuntu it just keeps asking for it repeatedly, and I can't access the Internet. I don't have an ethernet cable at the moment, but if someone would be so kind as to ask me questions I will gladly answer, and if you have suggestions, I will do them--the only thing is, I am subletting this apartment from someone who is away on vacation, so I don't want to screw with the router settings unless I know what I'm doing! - I do not have Wicd - Yes, I have the router's information (key works in Windows) - Feedback of lshw says that the wireless card is Ultimate N Wifi Link 5300, vendor: Intel Corporation, physical id: 0 ,etc. The first two commands I was told to try work OK, but when I typed sudo ifconfig wlan0 essid ..... I got back 'essid: Unknown host' Would my question be better on the Ubuntu forums than here on AU?

  Read the article

• Pushing image changes to multiple servers

  - by gms8994

  I need the ability to push images out to multiple servers whenever they're updated. I've looked at Network Filesystems, but they're all but worthless due to their speed. Images can be uploaded to any one of 3 servers, and would then need to be copied to the other 2. Any suggestions? I'm open to try just about anything. EDIT: Graphics data (jpg, gif, png, etc). Linux only. We're currently using rsync. But having it work back and forth is getting cumbersome. It's all local network.

  Read the article

• Server 2008 Hyper-V User Accounts to access each other

  - by asn1981

  Hi, I have a windows server 2008 r2 with 3 hyper-v vm's IIS server Sql server 3 - Mail server I'm new to networking/server configuration. I have created a Virtual Network and can see each of the 3 VMs as well as the host on the network. I can connect from each VM to the host using the admin account. However, what would be the best (secure) way to create connections/accounts between the VMs, presumabely this shouldn't be done with an admin account but one with lesser priveledges. For example, to be able to access the SQL Server VM from the IIS server VM?

  Read the article

• Retrieve Ip Adress

  - by kareemsaad

  I want any way to know who take my IP from my network place in my company

  Read the article

• SSH logins failing before success

  - by Vincent

  I am running Ubuntu 12.04 Server, updated, to run a webserver on Tomcat 7. I have about 1000 clients that are very very often using an RSYNC program to sync some file with this server. Those RSync are using SSH with a certain user to open connections on the server. The result is that my server is, as normal, full of connections by the same user. About 5 connections per 1 second every day any time. Then, when I try to open a regular SSH connection with my Putty client, the connection fails before login saying "Server unexpectedly closed network connection", about 6 times for 10 attemps, anbd for 4 attemps out of 10, it works normally and I am able to login as any user. Is there a overload of connections here? The server statistics are very calm saying less then 40% of network usage and less of 2% CPU. How can I improve this? Thank you for any help. V.

  Read the article

• Remote Destkop into Server 2008R2 with Firewall On

  - by Eternal21

  I've got a fresh install of Remove Server 2008 R2, 64 bit. The problem is I can't Remote Destkop into it. I clicked 'Enable Remote Desktop' inside 'Initial Configuration Tasks', and set it to: Allow connections only from computers running Remote Destkop with Network Level Authentication (more secure). The thing is, this used to work just fine, and then it stopped. The only way I can get it to work now is if I turn of Windows Firewall completely off (Public network location settings). Obviously I don't want to run the server with firewall off, so what specific settings in Firewall do I need to disable, or am I doing something wrong?

  Read the article

• Setting nagios location in map

  - by Mech Software

  I have Nagios installed and I'm working on getting the network map correct. The problem I have is that "Nagios" appears to be in the "internet" when it should be located on the MechNAS server. What I want is Nagios Process to show up inside the local network. So it should show up at the same layer as MechNAS and development. Where exactly is that configured? I didnt see any place to set that up and it looks now like it's out there on it's own. Documentation and Googling didnt seem to turn up anything either.

  Read the article

• Iis multiple domain binding

  - by user2979484

  I've a server with vshpere running and one vm with Windows 2008 r2. I'm hosting a website on this vm. But I want to try to add another domain. Now I have 3 ip-adresses. 1 for vspehere. 1 for vm. 1 for 2nd domain. When I add a new site and edit the bindings to the last ip-adress (2nd domain) it doesn't work. I've added also a new network adapter on vsphere and edited in the windows network adapter. Could anyone help me out with this. Sorry for my bad english I hope you will understand it.

  Read the article

• When using Windows 2003 DNS Server, how do I configure it to resolve a particular FQDN but rely on e

  - by Corey

  Let's say I have a web-server on my internal network which is behind a NAT router. I have my external DNS for the “xyz.com” domain configured with an A record for “foo” that points to my router's public address. I want my internal network clients to resolve foo.xyz.com to the internal address. However, this is the only xyz.com record that should point to an internal address. Do I need to create a primary zone for xyz.com and mirror all the records from my external zone with the exception of “foo” (this is what I am doing now), or is there a better way?

  Read the article

• Why would one server be sending DUP ACK packets to one PC, which is responding with HTTP RST packets?

  - by IronicMuffin

  I'm not a network profressional, so please excuse any wrong language. I was debugging why my DNS traffic was a constant 160Kbps on our corporate network. I opened up a wireshark trace, and I see one PC of a coworker broadcasting HTTP [RST] packets to one of our DMZ servers at the rate of 1000 a second. He restarted his machine, and as soon as it went offline, the server started broadcasting [DUP] [ACK] packets, until he came back online. It then resumed the HTTP [RST] packets. Apparently this server has been doing this kind of behavior since it went live. I believe it did this with a printer and an access point as well. Can anyone explain why this behavior is occurring? Any solutions? The initial research was done because there have been "bandwidth issues" and I wonder if this is contributing.

  Read the article

• Backup restore issue

  - by rrahman_bd

  I have a windows server 2008 with exchange database full backup. Now for testing purpose i want to restore that full server to a VM. I have copied the whole backup to VM01 and took it to Private Network. And now i want to take backup from VM01 and restore it to VM02. Both are at private network. I was able to find VM02 test backup by searching in VM1. But the copyed restore file is not showing in the window !!! Is there any policy so that i can not restore except from the original location?

  Read the article

• Run command on init and restart on errors

  - by chersanya

  I have internet access on my PC through proxy through SSH, so every time I need to execute ssh -L PORT:SERVER:PORT LOGIN@SERVER and then type a password. After each network failure or reconnect this command has to be executed again. I've got bored of it and look for a way to do this automatically: first run this after boot (it doesn't seem to be a problem - put this command in some init file and that's all) and then rerun it (if possible, then type password) on each network failure. Is it possible, and how? OS Linux (Debian)

  Read the article

• Hyper-V with a single host NIC

  - by Cylindric

  I'm trying to create a simple Hyper-V test machine, and am having more problems than expected with the basic networking. All other hypervisors I've used (vmware server, vmware player, virtualbox) allow me to use the default single NIC in my machine, and then create guests with "bridged" mode so they appear like a normal machine on the network. With the Hyper-V server, when I create a Virtual Switch and set it to "external", I lose all network access from the host. The solutions I've seen online seem to rely on complex configurations requiring multiple vSwitches and RRAS on the host to get it going. Is it really that complex to get a simple, single-NIC Hyper-V server going, in such a way that I can still use the host? The host is Windows 8.

  Read the article

• Wireless problems with Broadcom BCM4313 with windows7 (duplicate)

  - by user292394

  I have wireless connection problem can't connect my wireless adress lspci -vvnn | grep 14e4 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01) iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11abg ESSID:off/any Mode:Managed Access Point: Not-Associated Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no 2: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: no lsmod Module Size Used by bnep 19624 2 rfcomm 69160 8 ip6t_REJECT 12939 1 xt_hl 12521 6 ip6t_rt 13537 3 nf_conntrack_ipv6 18894 8 nf_defrag_ipv6 34768 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17717 10 xt_limit 12711 13 xt_tcpudp 12884 18 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 8 nf_defrag_ipv4 12758 1 nf_conntrack_ipv4 xt_conntrack 12760 16 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12770 0 nf_nat 21798 1 nf_nat_ftp nf_conntrack_ftp 18638 1 nf_nat_ftp nf_conntrack 96976 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 ip_tables 27239 1 iptable_filter vx_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT uvcvideo 80885 0 videobuf2_vmalloc 13216 1 uvcvideo videobuf2_memops 13362 1 videobuf2_vmalloc snd_hda_codec_hdmi 46207 1 videobuf2_core 40664 1 uvcvideo videodev 134688 2 uvcvideo,videobuf2_core snd_hda_codec_conexant 57441 1 snd_hda_intel 52355 8 snd_hda_codec 192906 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13602 1 snd_hda_codec snd_pcm 102099 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 dm_multipath 22873 0 snd_seq_midi_event 14899 1 snd_seq_midi scsi_dh 14882 1 dm_multipath lib80211_crypt_tkip 17619 0 snd_rawmidi 30144 1 snd_seq_midi intel_powerclamp 14705 0 coretemp 13435 0 kvm_intel 143060 0 kvm 451511 1 kvm_intel joydev 17381 0 serio_raw 13462 0 snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi intel_ips 18664 0 wl 4207846 0 snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi btusb 32412 0 bluetooth 395423 22 bnep,btusb,rfcomm snd_timer 29482 2 snd_pcm,snd_seq snd 69238 26 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi lib80211 14381 2 wl,lib80211_crypt_tkip toshiba_bluetooth 12852 0 cfg80211 484040 1 wl lpc_ich 21080 0 fglrx 8085343 190 soundcore 12680 1 snd toshiba_acpi 22901 0 sparse_keymap 13948 1 toshiba_acpi wmi 19177 1 toshiba_acpi amd_iommu_v2 19054 1 fglrx video 19476 0 mei_me 18627 0 mei 82276 1 mei_me mac_hid 13205 0 parport_pc 32701 0 ppdev 17671 0 lp 17759 0 parport 42348 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 52570 0 hid 106148 2 hid_generic,usbhid psmouse 102222 0 ahci 25819 3 libahci 32168 1 ahci atl1c 46086 0 dm_mirror 22135 0 dm_region_hash 20862 1 dm_mirror dm_log 18411 2 dm_region_hash,dm_mirror Can someone give any ideas on how I can fix my wireless

  Read the article

• Is it possible to restrict the connection duration per client on the router (say with OpenWRT)?

  - by static

  How to limit the connection duration per client per period (say, one MAC-address can connect only for 3 hours per week to the network). Where could be defined such a rule? In the firewall? So the rule should define not statically times (this is simple), when the client is allowed to access the network, but the duration of the connection per day/week/month, etc. How/where to implement such rules? Is it possible to do so with OpenWRT/DD-WRT?

  Read the article

• How do I change the domain name of my AD DS? [closed]

  - by Gaate

  I recently set up a server with AD DC and used a mydomain.local address for it. I now would like to be able to access the server through remote desktop from outside my local network. So I have purchased a domain name that I have set up with my router for DDNS and forwarded to the IP of my server. I was wondering a few things. A) Is there a way I can forward the DDNS to point to my current AD DC x.local address so I wouldn't have to change the domain to log in from outside of local network? B) If there is not a way to do what I mentioned above, what is the easiest way to change the Domain Name (mydomain.local) in my AD DC? Should I completely remove it or is there a way to change it? I am using windows server 2012.

  Read the article

• How do I log in to the ubuntu 10.04 server using grub2 from a remote computer/terminal with GUI running

  - by Steve Cornall

  I upgraded my server from ubuntu 8.04 to 10.04. It now uses the grub2 bootloader. In 8.04 from the grub log-in page I could select the option log in to server and thereby connect through SSH directly to my server and have the GUI running. I can currently log in to my upgraded server now from any of my 8.04 machines using grub1 with the GUI running. I cannot log in that way from a machine that uses grub2 and ubuntu 10.04. I want to upgrade my entire network to ubuntu 10.04 but cannot until I know how to log in to the network from grub2 with the gui open. I have exhausted all my ideas as to the solution to this problem. Any help would be most appreciated. Thank-you

  Read the article

< Previous Page | 347 348 349 350 351 352 353 354 355 356 357 358  | Next Page >