silverlight embedded - Page 353

Trouble with site-to-site OpenVPN & pfSense not passing traffic

- by JohnCC

I'm trying to get an OpenVPN tunnel going on pfSense 1.2.3-RELEASE running on embedded routers. I have a local LAN 10.34.43.0/254. The remote LAN is 10.200.1.0/24. The local pfSense is configured as the client, and the remote is configured as the server. My OpenVPN tunnel is using the IP range 10.99.89.0/24 internally. There are also some additional LANs on the remote side routed through the tunnel, but the issue is not with those since my connectivity fails before that point in the chain. The tunnel comes up fine and the logs look healthy. What I find is this:- I can ping and telnet to the remote LAN and the additional remote LANs from the local pfSense box's shell. I cannot ping or telnet to any remote LANs from the local network. I cannot ping or telnet to the local network from the remote LAN or the remote pfSense box's shell. If I tcpdump the tun interfaces on both sides and ping from the local LAN, I see the packets hit the tunnel locally, but they do not appear on the remote side (nor do they appear on the remote LAN interface if I tcpdump that). If I tcpdump the tun interfaces on both sides and ping from the local pfSense shell, I see the packets hit the tunnel locally, and exit the remote side. I can also tcpdump the remote LAN interface and see them pass there too. If I tcpdump the tun interfaces on both sides and ping from the remote pfSense shell, I see the packets hit the remote tun but they do not emerge from the local one. Here is the config file the remote side is using:- #user nobody #group nobody daemon keepalive 10 60 ping-timer-rem persist-tun persist-key dev tun proto udp cipher BF-CBC up /etc/rc.filter_configure down /etc/rc.filter_configure server 10.99.89.0 255.255.255.0 client-config-dir /var/etc/openvpn_csc push "route 10.200.1.0 255.255.255.0" lport <port> route 10.34.43.0 255.255.255.0 ca /var/etc/openvpn_server0.ca cert /var/etc/openvpn_server0.cert key /var/etc/openvpn_server0.key dh /var/etc/openvpn_server0.dh comp-lzo push "route 205.217.5.128 255.255.255.224" push "route 205.217.5.64 255.255.255.224" push "route 165.193.147.128 255.255.255.224" push "route 165.193.147.32 255.255.255.240" push "route 192.168.1.16 255.255.255.240" push "route 192.168.2.16 255.255.255.240" Here is the local config:- writepid /var/run/openvpn_client0.pid #user nobody #group nobody daemon keepalive 10 60 ping-timer-rem persist-tun persist-key dev tun proto udp cipher BF-CBC up /etc/rc.filter_configure down /etc/rc.filter_configure remote <host> <port> client lport 1194 ifconfig 10.99.89.2 10.99.89.1 ca /var/etc/openvpn_client0.ca cert /var/etc/openvpn_client0.cert key /var/etc/openvpn_client0.key comp-lzo You can see the relevant parts of the routing tables extracted from pfSense here http://pastie.org/5365800 The local firewall permits all ICMP from the LAN, and my PC is allowed everything to anywhere. The remote firewall treats its LAN as trusted and permits all traffic on that interface. Can anyone suggest why this is not working, and what I could try next?

Read the article

Open-source and client-side IRC-Client

- by user125197

I'm administrating a homepage with an IRC-Webclient. At the moment, it uses a Java-client, modified to be SSL-compatible and compatible with whatever design I want to use. The usual PJIRC thing, with users wishes and concerns implemented (I'll give you SSL-PJIRC if you want - no problem. The login-script will be improved for IE6-support this weekend, means write the object tag if an old IE is found, that's it. Rest runs perfectly well). But still, the better user experience would be a client that only requires the user to enable JavaScript. So, before I go into rewriting and customizing a complete Java-IRC-solution, I'd like to ask some other people - after researching for half a year of time. The requirements are: a) Free hosting, no cgi-bin is acceptable. A lot of hosters also have CGI supported, but it doesn't allow IRC-access. So, seems you are limited to x10-hosting for CGI:IRC. b) Solution must be open source (not free as in free beer, but free as in free speech - I want to be able to read every line of the code). c) Hosting cannot be limited to Windows-hosting. Free operation systems (anything with Linux, BSD, whatever - I think you get what I mean) must be possible. d) No server-side technology. I'm limited to everything that runs client-side only. (Well, a Java-Applet does...). d) Solution must support SSL. e) The side must be able to move. Means, you register to a new free hoster, load your things up via FileZilla and the thing simply runs. No server-concerning implementations needed. f) Old browsers must be supported. From all my research, there are two ways a) Java-Applet b) Use HTML5-Websockets (it is impossible to use the JavaScript-library I found, as it depends on ActiveX - means, Windows hosting). b) means "you are going to enter very unstable content". I worked with HTML5 for month, and, well ... Though, HTML5 also is not suitable for older browsers (old browser support is an absolutely necessary requirement). PHP by the way is a server side solution ... so no line of PHP. My idea now was a Java Applet, and a fallback which again is embedded and proprietary, but only requieres JavaScript (wsirc or Mibbit are great here, whilst I prefer wsirc ... and zooming fonts that are plainly to small, but worse, cannot read the code). So my question is - with free hosting, not installation on server, plain upload - do you see and open source, complelety client-side, ssl-compatible way to use or write a client? This wouldn't be my first programming project, I'm not afraid of the code. If there was a way and I had to write it, even from scratch, I'd do. From all I know, there sadly is none. But maybe some experienced admin has an idea? Best Wishes, yetanotheruser Sry my English isn't perfect. It's enough for programming at least.

Read the article

How do I resolve "conflicting accounts" in google apps without breaking links to online photos on picasa?

- by lee

I have been using google apps for some time, and only recently learned I have what google calls "conflicting accounts" which is creating a problem I haven't been able to resolve. Turns out that the apps account really only covers email, google docs, and the calendar and not other features like picasa, blogger, youtube etc. and at some point they gave me a non-apps google account with my same (proprietary non-gmail) email address for the additional apps. This is the "conflicting account." I had noticed that I sometimes had to come in through another door when I went back and forth, between docs, picasa, and mail let's say, but never understood why since it was the same username and password and I didn't get any communication about it at the time. Google is now in the process of giving google apps users access to the additional apps and providing instructions for consolidating the two accounts. But if I want to move my picasa site into the new apps structure I have to download my albums and re-synch them. This would be disastrous for me as I have hundreds of photos embedded in my websites, and new web addresses would break all the connections. The alternative seems to be to rename my "personal" (non-apps) accounts as described at http://www.google.com/support/a/bin/answer.py?answer=185186: Users with conflicting Google Accounts can easily resolve their conflicts by renaming their personal Google Accounts, and the data in their personal accounts will remain safe and accessible to them. Here’s how a user can rename their personal Google Account: * Step 1: Visit www.google.com/accounts and sign in with your personal Google Account * Step 2: Click ‘Change email’ under ‘Personal Settings’ * Step 3: Enter a different email address where you can receive mail, enter your password, and click ‘Save email address’ * Step 4: Check your other email If your users don’t have different email addresses where they can receive mail, they can resolve the conflict by renaming their personal Google Accounts to @gmail.com addresses instead. Sounds easy enough, right? I gave them a gmail address. The wizard said "sorry you can't use a gmail account for this" --which contradicts the last paragraph above but ok, I switched to a new email address I just created for one of my domains. I can send email back and forth between this account and my google apps account with no problem. But when I try to use it as a replacement on the "personal" side I always get "The password you gave is incorrect." I have tried it over and over and know the password is correct. Since I like to get all my emails though one web interface I initially had the new email set up as an add-on to my google apps email account, but noting that the instructions said the "personal account" email could not be associated with any other gmail account I took it off and went back to accessing it via horde so there would be no conflict there, which seemed to make no difference. I can't figure out why it won't accept the password. Does anyone have any thoughts about that? or suggestions for another way to resolve my picasa problem? any help at all is greatly appreciated. Lee

Read the article

Mouse Error Code 24. Windows 7

- by Cj.

I've had the same mouse for a while, and it's been working fine until one day, it started giving me a message about a device not working properly. I tried updating the drivers, and re-installing, I even deleted old drivers in case my computer should be a little confused. It never made a difference, and my mouse seemed to be working just fine despite getting the permanent error in my device manager, I looked it up several times online, but I never found anything I could actually use, when I go to official websites, I always get the same response "plug in so so into a different place - drivers - install silverlight before you can watch this tutorial, try it on a different machine". so I gave up on that. But now is where I have a real problem, lately, my little strange error evolved into a fullblown Error 24, and my mouse is starting to turn on and off randomely, especially when it is being used, but I do hear it go "badum..dadum" when I'm off doing something else. when I looked up error code 24, I really didn't find much other than it meaning: Code 24 This device is not present, is not working properly, or does not have all its drivers installed. (Code 24) Cause The device is installed incorrectly. The problem could be a hardware failure, or a new driver might be needed. Devices stay in this state if they have been prepared for removal. After you remove the device, this error disappears. But, I have tried uninstalling the device entirely several times, and it'll go right back to its previous state with error 24, and turning on and off randomely. what do I do? I cannot afford taking it to a repair place, I can't really afford a new mouse either, I refuse to buy cheap ones as I am a gamer, in need of more than 3 buttons, and a good grip is important. Could there possibly be some confusion in the registry? I do remember having gotten some early problems after I converted my vista to windows7. But I hardly dare going in there unless I'm 100% certain of what I'm going for, and I can honestly say I am at a loss here. Edit: it is a USB mouse we're talking about here. MX™518 Optical Gaming Mouse (logitech) Edit2: I am seeing no rupture, so it must be on the inside of my mouse, or inside the rubber, protecting the cable, that would be really inconvenient to search for

Read the article

XNA Notes 009

- by George Clingerman

This past week the MVPs (myself included) were on Microsoft campus for the MVP summit. So I apologize in advance if you did something cool or heard of something cool happening with XNA and XBLIGs and it’s not in my notes. I did my best to stay on top of things, but honestly this community is fast and furious with what it’s doing and creating. I really can’t keep up and that’s fantastic! But here’s what I *did* notice while I was there on Microsoft Campus (and I did make sure to point out to the XNA team several of these very cool happenings while I had their ears). Time Critical XNA News: The XNA team wants you to know that Dream Build Play registration is now open! http://blogs.msdn.com/b/xna/archive/2011/02/28/registration-now-open-for-dream-build-play-2011-challenge.aspx Join the XNA-UK create on March 24, 2011 at the Microsoft Tech Days Conference http://xna-uk.net/blogs/darkgenesis/archive/2011/02/27/join-the-xna-uk-crew-at-the-microsoft-tech-days-conference-on-24th-march-2011.aspx XNA Team: Shawn Hargreaves shares one of the coolest things that’s happened in the XNA community http://blogs.msdn.com/b/shawnhar/archive/2011/03/02/xbox-indies-pivot-view.aspx Nick Gravelyn continues his unique marketing/work prioritization strategy as he tries to get to 5,000 Pixel Man users before he makes Pixel Man 2 (and he’s almost there!) http://nickgravelyn.com/pixelman2/ XNA MVPs: A lot of the XNA MVPs were at the Microsoft MVP Summit 2011. Due to NDAs, most things can’t be shared, but I’m sure if you’re curious you could ask them about the general vibe and feeling they got from the team and the future of XNA/XBLIG and more. Catalin Zima and team release the free WP7 game Chickens Can Dream http://twitter.com/CatalinZima/statuses/41174062923390976 http://www.amusedsloth.com/2011/02/chickens-can-dream-is-live/ Charles Humphrey (NemoKrad) posts his March talk source and PowerPoint http://xna-uk.net/blogs/randomchaos/archive/2011/03/04/march-2011-talk-post-processing-framework.aspx XNA Developers: Michael B. McLaughlin posts about ANTS Memory Profile and creates a CheckMemoryAllocationGame sample (extremely useful if you’re looking to see how much memory some operation allocates!) http://geekswithblogs.net/mikebmcl/archive/2011/02/28/ants-memory-profiler-7.0-review.aspx http://geekswithblogs.net/mikebmcl/archive/2011/03/01/checkmemoryallocationgame-sample.aspx Andy Schatz (2009 IGF winner for Monaco) talking XNA at GDC 2011 http://www.gamasutra.com/view/news/33313/GDC_2011_Andy_Schatz_Ill_Make_My_Last_Game_When_I_Die.php Xbox LIVE Indie Games (XBLIG): Clover: A Curious Tale by BinaryTweed is coming as a Deal of the Week during St. Patricks Day http://majornelson.com/archive/2011/03/03/comingsoontothexboxlivemarketplacemarchthird.aspx Ska Studios away at GDC but still very post happy as always http://www.ska-studios.com/2011/03/02/swamped-picture-pack/ http://www.ska-studios.com/2011/02/28/the-february-showcase/ http://www.ska-studios.com/2011/02/25/good-morning-gato-51-smelling-the-roses/ Just Press Start interviews Matthew Mikuszewski of Darkwind Media about Blocks Indie http://justpressstart.net/?p=516 Gamergeddon Xbox Indie Game Round Up - February 27th http://www.gamergeddon.com/2011/02/27/xbox-indie-game-round-up-february-27th/ http://www.gamergeddon.com/category/xbox-360/indie-games/ GameMarx does a round up of all the Xbox Live Indie Game podcasts that are currently available http://www.gamemarx.com/news/2011/02/27/xbox-live-indie-game-podcasts.aspx GameMarx episode 11 http://www.gamemarx.com/video/the-show/26/ep-11-february-25-2011.aspx In perhaps what I feel is the most exciting news I’ve heard all week, Michael C. Neel (ViNull of GameMarx fame) re-launch XboxIndies.com! http://www.gamemarx.com/news/2011/03/01/the-relaunch-of-xboxindies-com.aspx http://xboxindies.com/ Armless Octopus shares a little of what they heard from Luke Schneider of Radiangames during his GDC 2011 talk http://www.armlessoctopus.com/2011/03/02/gdc-2011-luke-schneider-offers-insight-into-radiangames-success/ VVGindiecast Episode 1 with guests Derek Strickland(Mr_Deeke), Kris Steele(Kriswd40 from FunInfused Games) and Dave Voyles(From armlessoctopus.com) http://vvgtv.com/2011/02/25/vvgindiecast-xblig-podcast/ If you’re doing Xbox LIVE Indie Game Reviews get in touch with XboxIndies.com to get into their aggregated feed http://forums.create.msdn.com/forums/p/76931/467189.aspx#467189 B.U.T.T.O.N and Flotilla represented XNA very well at the Independent Games Festival (are there any more games entered that were created using XNA? Stand up and be heard!) http://www.igf.com/php-bin/entry2011.php?id=374 Armless Ocotopus interview at GDC 2011 with Soulcaster creator Ian Stocker http://www.armlessoctopus.com/2011/03/04/gdc-2011-interview-with-soulcaster-creator-ian-stocker/ MommysBestGames gets a nod in the DarkBasic newsletter where it features the Explosionade Editor (just do a search for Explosionade to get to the interesting bits!) http://www.thegamecreators.com/pages/newsletters/newsletter_issue_98.html You may be hearing the cries of FortressCraft (coming soon to XBLIG) being so wrong for stealing the idea from MineCraft. But did you know the the game MineCraft started from was an XNA game called Infiniminer? XNA is getting it’s fingers into EVERYTHING! http://www.minecraftwiki.net/wiki/Infiniminer XNA Development: TorqueX is NOT dead thanks to the tremendous efforts of the XNA Community working on the CEV (special thanks to @PinoEire for all his hard work on making that happen!) http://www.garagegames.com/community/blogs/view/20878 http://torquecev.com/ Dave Henry has posted XNA 3.x adding platformer start kit to the network game state management on his new site http://twitter.com/#!/mort8088/status/43407715908853760 http://mort8088.com/2011/03/03/xna-3-x-adding-platformer-starter-kit-to-network-game-state-management/ Mark Bamford releases XNAViewer 4.0, great for running XNA games inside of a Windows Form (for building level editors, etc.) http://twitter.com/#!/xzodia04/status/43466830412660736 http://xnaviewer.codeplex.com/ Unit testing an XNA game with Resharper and NUnit http://smnbss.wordpress.com/2011/02/28/planetx-unit-testing-an-xna-game-with-resharper-and-nunit-wp7-xbox-xna/ XNA for Silverlight developers: Part 5 - Input (touch + gestures) http://ht.ly/1bxwUE Mike McLaughlin shares a link he stumbled across for those looking to understand vector and matrix math http://twitter.com/#!/mikebmcl/status/42587074725036032 http://chortle.ccsu.edu/VectorLessons/vectorIndex.html DigitalRune Resources Pooling in XNA (Part 1) http://www.digitalrune.com/Support/Blog/tabid/719/EntryId/84/DigitalRune-Helper-Library-Resource-Pooling-in-XNA-Part-1.aspx JohnK “bobthecbuilder” released a new SunBurn Update that lowers the requirements for Windows Games http://twitter.com/#!/bobthecbuilder/status/43457306578522112 http://www.synapsegaming.com/blogs/johnk/archive/2011/03/03/sunburn-update-windows-redistributable.aspx Quick update on the Indiefreaks Game Framework v0.4 development status http://indiefreaks.com/2011/03/04/quick-update-on-igf-v0-4-development/

Read the article

SQLAuthority News – A Successful Community TechDays at Ahmedabad – December 11, 2010

- by pinaldave

We recently had one of the best community events in Ahmedabad. We were fortunate that we had SQL Experts from around the world to have presented at this event. This gathering was very special because besides Jacob Sebastian and myself, we had two other speakers traveling all the way from Florida (Rushabh Mehta) and Bangalore (Vinod Kumar).There were a total of nearly 170 attendees and the event was blast. Here are the details of the event. Pinal Dave Presenting at Community Tech Days On the day of the event, it seemed to be the coldest day in Ahmedabad but I was glad to see hundreds of people waiting for the doors to be opened some hours before. We started the day with hot coffee and cookies. Yes, food first; and it was right after my keynote. I could clearly see that the coffee did some magic right away; the hall was almost full after the coffee break. Jacob Sebastian Presenting at Community Tech Days Jacob Sebastian, an SQL Server MVP and a close friend of mine, had an unusual job of surprising everybody with an innovative topic accompanied with lots of question-and-answer portions. That’s definitely one thing to love Jacob, that is, the novelty of the subject. His presentation was entitled “Best Database Practices for the .Net”; it really created magic on the crowd. Pinal Dave Presenting at Community Tech Days Next to Jacob Sebastian, I presented “Best Database Practices for the SharePoint”. It was really fun to present Database with the perspective of the database itself. The main highlight of my presentation was when I talked about how one can speed up the database performance by 40% for SharePoint in just 40 seconds. It was fun because the most important thing was to convince people to use the recommendation as soon as they walk out of the session. It was really amusing and the response of the participants was remarkable. Pinal Dave Presenting at Community Tech Days My session was followed by the most-awaited session of the day: that of Rushabh Mehta. He is an international BI expert who traveled all the way from Florida to present “Self Service BI” session. This session was funny and truly interesting. In fact, no one knew BI could be this much entertaining and fascinating. Rushabh has an appealing style of presenting the session; he instantly got very much interaction from the audience. Rushabh Mehta Presenting at Community Tech Days We had a networking lunch break in-between, when we talked about many various topics. It is always interesting to get in touch with the Community and feel a part of it. I had a wonderful time during the break. Vinod Kumar Presenting at Community Tech Days After lunch was apparently the most difficult session for the presenter as during this time, many people started to fall sleep and get dizzy. This spot was requested by Microsoft SQL Server Evangelist Vinod Kumar himself. During our discussion he suggested that if he gets this slot he would make sure people are up and more interactive than during the morning session. Just like always, this session was one of the best sessions ever. Vinod is true to his word as he presented the subject of “Time Management for Developer”. This session was the biggest hit in the event because the subject was instilled in the mind of every participant. Vinod Kumar Presenting at Community Tech Days Vinod’s session was followed by his own small session. Due to “insistent public demand”, he presented an interesting subject, “Tricks and Tips of SQL Server“. In 20 minutes he has done another awesome job and all attendees wanted more of the tricks. Just as usual he promised to do that next time for us. Vinod’s session was succeeded by Prabhjot Singh Bakshi’s session. He presented an appealing Silverlight concept. Just the same, he did a great job and people cheered him. Prabhjot Presenting at Community Tech Days We had a special invited speaker, Dhananjay Kumar, traveling all the way from Pune. He always supports our cause to help the Community in empowering participants. He presented the topic about Win7 Mobile and SharePoint integration. This was something many did not even expect to be possible. Kudos to Dhananjay for doing a great job. Dhananjay Kumar Presenting at Community Tech Days All in all, this event was one of the best in the Community Tech Days series in Ahmedabad. We were fortunate that legends from the all over the world were present here to present to the Community. I’d say never underestimate the power of the Community and its influence over the direction of the technology. Vinod Kumar Presenting trophy to Pinal Dave Vinod Kumar Presenting trophy to Pinal Dave This event was a very special gathering to me personally because of your support to the vibrant Community. The following awards were won for last year’s performance: Ahmedabad SQL Server User Group (President: Jacob Sebastian; Leader: Pinal Dave) – Best Tier 2 User Group Best Development Community Individual Contributor – Pinal Dave Speakers I was very glad to receive the award for our entire Community. Attendees at Community Tech Days I want to say thanks to Rushabh Mehta, Vinod Kumar and Dhananjay Kumar for visiting the city and presenting various technology topics in Community Tech Days. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: MVP, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority Author Visit, SQLAuthority News, T SQL, Technology

Read the article

C# 4.0: Dynamic Programming

- by Paulo Morgado

The major feature of C# 4.0 is dynamic programming. Not just dynamic typing, but dynamic in broader sense, which means talking to anything that is not statically typed to be a .NET object. Dynamic Language Runtime The Dynamic Language Runtime (DLR) is piece of technology that unifies dynamic programming on the .NET platform, the same way the Common Language Runtime (CLR) has been a common platform for statically typed languages. The CLR always had dynamic capabilities. You could always use reflection, but its main goal was never to be a dynamic programming environment and there were some features missing. The DLR is built on top of the CLR and adds those missing features to the .NET platform. The Dynamic Language Runtime is the core infrastructure that consists of: Expression Trees The same expression trees used in LINQ, now improved to support statements. Dynamic Dispatch Dispatches invocations to the appropriate binder. Call Site Caching For improved efficiency. Dynamic languages and languages with dynamic capabilities are built on top of the DLR. IronPython and IronRuby were already built on top of the DLR, and now, the support for using the DLR is being added to C# and Visual Basic. Other languages built on top of the CLR are expected to also use the DLR in the future. Underneath the DLR there are binders that talk to a variety of different technologies: .NET Binder Allows to talk to .NET objects. JavaScript Binder Allows to talk to JavaScript in SilverLight. IronPython Binder Allows to talk to IronPython. IronRuby Binder Allows to talk to IronRuby. COM Binder Allows to talk to COM. Whit all these binders it is possible to have a single programming experience to talk to all these environments that are not statically typed .NET objects. The dynamic Static Type Let’s take this traditional statically typed code: Calculator calculator = GetCalculator(); int sum = calculator.Sum(10, 20); Because the variable that receives the return value of the GetCalulator method is statically typed to be of type Calculator and, because the Calculator type has an Add method that receives two integers and returns an integer, it is possible to call that Sum method and assign its return value to a variable statically typed as integer. Now lets suppose the calculator was not a statically typed .NET class, but, instead, a COM object or some .NET code we don’t know he type of. All of the sudden it gets very painful to call the Add method: object calculator = GetCalculator(); Type calculatorType = calculator.GetType(); object res = calculatorType.InvokeMember("Add", BindingFlags.InvokeMethod, null, calculator, new object[] { 10, 20 }); int sum = Convert.ToInt32(res); And what if the calculator was a JavaScript object? ScriptObject calculator = GetCalculator(); object res = calculator.Invoke("Add", 10, 20); int sum = Convert.ToInt32(res); For each dynamic domain we have a different programming experience and that makes it very hard to unify the code. With C# 4.0 it becomes possible to write code this way: dynamic calculator = GetCalculator(); int sum = calculator.Add(10, 20); You simply declare a variable who’s static type is dynamic. dynamic is a pseudo-keyword (like var) that indicates to the compiler that operations on the calculator object will be done dynamically. The way you should look at dynamic is that it’s just like object (System.Object) with dynamic semantics associated. Anything can be assigned to a dynamic. dynamic x = 1; dynamic y = "Hello"; dynamic z = new List<int> { 1, 2, 3 }; At run-time, all object will have a type. In the above example x is of type System.Int32. When one or more operands in an operation are typed dynamic, member selection is deferred to run-time instead of compile-time. Then the run-time type is substituted in all variables and normal overload resolution is done, just like it would happen at compile-time. The result of any dynamic operation is always dynamic and, when a dynamic object is assigned to something else, a dynamic conversion will occur. Code Resolution Method double x = 1.75; double y = Math.Abs(x); compile-time double Abs(double x) dynamic x = 1.75; dynamic y = Math.Abs(x); run-time double Abs(double x) dynamic x = 2; dynamic y = Math.Abs(x); run-time int Abs(int x) The above code will always be strongly typed. The difference is that, in the first case the method resolution is done at compile-time, and the others it’s done ate run-time. IDynamicMetaObjectObject The DLR is pre-wired to know .NET objects, COM objects and so forth but any dynamic language can implement their own objects or you can implement your own objects in C# through the implementation of the IDynamicMetaObjectProvider interface. When an object implements IDynamicMetaObjectProvider, it can participate in the resolution of how method calls and property access is done. The .NET Framework already provides two implementations of IDynamicMetaObjectProvider: DynamicObject : IDynamicMetaObjectProvider The DynamicObject class enables you to define which operations can be performed on dynamic objects and how to perform those operations. For example, you can define what happens when you try to get or set an object property, call a method, or perform standard mathematical operations such as addition and multiplication. ExpandoObject : IDynamicMetaObjectProvider The ExpandoObject class enables you to add and delete members of its instances at run time and also to set and get values of these members. This class supports dynamic binding, which enables you to use standard syntax like sampleObject.sampleMember, instead of more complex syntax like sampleObject.GetAttribute("sampleMember").

Read the article

Windows Phone 7 development: Using isolated storage

- by DigiMortal

In my previous posting about Windows Phone 7 development I showed how to use WebBrowser control in Windows Phone 7. In this posting I make some other improvements to my blog reader application and I will show you how to use isolated storage to store information to phone. Why isolated storage? Isolated storage is place where your application can save its data and settings. The image on right (that I stole from MSDN library) shows you how application data store is organized. You have no other options to keep your files besides isolated storage because Windows Phone 7 does not allow you to save data directly to other file system locations. From MSDN: “Isolated storage enables managed applications to create and maintain local storage. The mobile architecture is similar to the Silverlight-based applications on Windows. All I/O operations are restricted to isolated storage and do not have direct access to the underlying operating system file system. Ultimately, this helps to provide security and prevents unauthorized access and data corruption.” Saving files from web to isolated storage I updated my RSS-reader so it reads RSS from web only if there in no local file with RSS. User can update RSS-file by clicking a button. Also file is created when application starts and there is no RSS-file. Why I am doing this? I want my application to be able to work also offline. As my code needs some more refactoring I provide it with some next postings about Windows Phone 7. If you want it sooner then please leave me a comment here. Here is the code for my RSS-downloader that downloads RSS-feed and saves it to isolated storage file calles rss.xml. public class RssDownloader { private string _url; private string _fileName; public delegate void DownloadCompleteDelegate(); public event DownloadCompleteDelegate DownloadComplete; public RssDownloader(string url, string fileName) { _url = url; _fileName = fileName; } public void Download() { var request = (HttpWebRequest)WebRequest.Create(_url); var result = (IAsyncResult)request.BeginGetResponse(ResponseCallback, request); } private void ResponseCallback(IAsyncResult result) { var request = (HttpWebRequest)result.AsyncState; var response = request.EndGetResponse(result); using(var stream = response.GetResponseStream()) using(var reader = new StreamReader(stream)) using(var appStorage = IsolatedStorageFile.GetUserStoreForApplication()) using(var file = appStorage.OpenFile("rss.xml", FileMode.OpenOrCreate)) using(var writer = new StreamWriter(file)) { writer.Write(reader.ReadToEnd()); } if (DownloadComplete != null) DownloadComplete(); } } Of course I modified RSS-source for my application to use rss.xml file from isolated storage. As isolated storage files also base on streams we can use them everywhere where streams are expected. Reading isolated storage files As isolated storage files are opened as streams you can read them like usual files in your usual applications. The next code fragment shows you how to open file from isolated storage and how to read it using XmlReader. Previously I used response stream in same place. using(var appStorage = IsolatedStorageFile.GetUserStoreForApplication()) using(var file = appStorage.OpenFile("rss.xml", FileMode.Open)) { var reader = XmlReader.Create(file); // more code } As you can see there is nothing complex. If you have worked with System.IO namespace objects then you will find isolated storage classes and methods to be very similar to these. Also mention that application storage and isolated storage files must be disposed after you are not using them anymore.

Read the article

Diagnose PC Hardware Problems with an Ubuntu Live CD

- by Trevor Bekolay

So your PC randomly shuts down or gives you the blue screen of death, but you can’t figure out what’s wrong. The problem could be bad memory or hardware related, and thankfully the Ubuntu Live CD has some tools to help you figure it out. Test your RAM with memtest86+ RAM problems are difficult to diagnose—they can range from annoying program crashes, or crippling reboot loops. Even if you’re not having problems, when you install new RAM it’s a good idea to thoroughly test it. The Ubuntu Live CD includes a tool called Memtest86+ that will do just that—test your computer’s RAM! Unlike many of the Live CD tools that we’ve looked at so far, Memtest86+ has to be run outside of a graphical Ubuntu session. Fortunately, it only takes a few keystrokes. Note: If you used UNetbootin to create an Ubuntu flash drive, then memtest86+ will not be available. We recommend using the Universal USB Installer from Pendrivelinux instead (persistence is possible with Universal USB Installer, but not mandatory). Boot up your computer with a Ubuntu Live CD or USB drive. You will be greeted with this screen: Use the down arrow key to select the Test memory option and hit Enter. Memtest86+ will immediately start testing your RAM. If you suspect that a certain part of memory is the problem, you can select certain portions of memory by pressing “c” and changing that option. You can also select specific tests to run. However, the default settings of Memtest86+ will exhaustively test your memory, so we recommend leaving the settings alone. Memtest86+ will run a variety of tests that can take some time to complete, so start it running before you go to bed to give it adequate time. Test your CPU with cpuburn Random shutdowns – especially when doing computationally intensive tasks – can be a sign of a faulty CPU, power supply, or cooling system. A utility called cpuburn can help you determine if one of these pieces of hardware is the problem. Note: cpuburn is designed to stress test your computer – it will run it fast and cause the CPU to heat up, which may exacerbate small problems that otherwise would be minor. It is a powerful diagnostic tool, but should be used with caution. Boot up your computer with a Ubuntu Live CD or USB drive, and choose to run Ubuntu from the CD or USB drive. When the desktop environment loads up, open the Synaptic Package Manager by clicking on the System menu in the top-left of the screen, then selecting Administration, and then Synaptic Package Manager. Cpuburn is in the universe repository. To enable the universe repository, click on Settings in the menu at the top, and then Repositories. Add a checkmark in the box labeled “Community-maintained Open Source software (universe)”. Click close. In the main Synaptic window, click the Reload button. After the package list has reloaded and the search index has been rebuilt, enter “cpuburn” in the Quick search text box. Click the checkbox in the left column, and select Mark for Installation. Click the Apply button near the top of the window. As cpuburn installs, it will caution you about the possible dangers of its use. Assuming you wish to take the risk (and if your computer is randomly restarting constantly, it’s probably worth it), open a terminal window by clicking on the Applications menu in the top-left of the screen and then selection Applications > Terminal. Cpuburn includes a number of tools to test different types of CPUs. If your CPU is more than six years old, see the full list; for modern AMD CPUs, use the terminal command burnK7 and for modern Intel processors, use the terminal command burnP6 Our processor is an Intel, so we ran burnP6. Once it started up, it immediately pushed the CPU up to 99.7% total usage, according to the Linux utility “top”. If your computer is having a CPU, power supply, or cooling problem, then your computer is likely to shutdown within ten or fifteen minutes. Because of the strain this program puts on your computer, we don’t recommend leaving it running overnight – if there’s a problem, it should crop up relatively quickly. Cpuburn’s tools, including burnP6, have no interface; once they start running, they will start driving your CPU until you stop them. To stop a program like burnP6, press Ctrl+C in the terminal window that is running the program. Conclusion The Ubuntu Live CD provides two great testing tools to diagnose a tricky computer problem, or to stress test a new computer. While they are advanced tools that should be used with caution, they’re extremely useful and easy enough that anyone can use them. Similar Articles Productive Geek Tips Reset Your Ubuntu Password Easily from the Live CDCreate a Persistent Bootable Ubuntu USB Flash DriveAdding extra Repositories on UbuntuHow to Share folders with your Ubuntu Virtual Machine (guest)Building a New Computer – Part 3: Setting it Up TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

Read the article

Pure Server-Side Filtering with RadGridView and WCF RIA Services

Those of you who are familiar with WCF RIA Services know that the DomainDataSource control provides a FilterDescriptors collection that enables you to filter data returned by the query on the server. We have been using this DomainDataSource feature in our RIA Services with DomainDataSource online example for almost an year now. In the example, we are listening for RadGridViews Filtering event in order to intercept any filtering that is performed on the client and translate it to something that the DomainDataSource will understand, in this case a System.Windows.Data.FilterDescriptor being added or removed from its FilterDescriptors collection. Think of RadGridView.FilterDescriptors as client-side filtering and of DomainDataSource.FilterDescriptors as server-side filtering. We no longer need the client-side one. With the introduction of the Custom Filtering Controls feature many new possibilities have opened. With these custom controls we no longer need to do any filtering on the client. I have prepared a very small project that demonstrates how to filter solely on the server by using a custom filtering control. As I have already mentioned filtering on the server is done through the FilterDescriptors collection of the DomainDataSource control. This collection holds instances of type System.Windows.Data.FilterDescriptor. The FilterDescriptor has three important properties: PropertyPath: Specifies the name of the property that we want to filter on (the left operand). Operator: Specifies the type of comparison to use when filtering. An instance of FilterOperator Enumeration. Value: The value to compare with (the right operand). An instance of the Parameter Class. By adding filters, you can specify that only entities which meet the condition in the filter are loaded from the domain context. In case you are not familiar with these concepts you might find Brad Abrams blog interesting. Now, our requirements are to create some kind of UI that will manipulate the DomainDataSource.FilterDescriptors collection. When it comes to collections, my first choice of course would be RadGridView. If you are not familiar with the Custom Filtering Controls concept I would strongly recommend getting acquainted with my step-by-step tutorial Custom Filtering with RadGridView for Silverlight and checking the online example out. I have created a simple custom filtering control that contains a RadGridView and several buttons. This control is aware of the DomainDataSource instance, since it is operating on its FilterDescriptors collection. In fact, the RadGridView that is inside it is bound to this collection. In order to display filters that are relevant for the current column only, I have applied a filter to the grid. This filter is a Telerik.Windows.Data.FilterDescriptor and is used to filter the little grid inside the custom control. It should not be confused with the DomainDataSource.FilterDescriptors collection that RadGridView is actually bound to. These are the RIA filters. Additionally, I have added several other features. For example, if you have specified a DataFormatString on your original column, the Value column inside the custom control will pick it up and format the filter values accordingly. Also, I have transferred the data type of the column that you are filtering to the Value column of the custom control. This will help the little RadGridView determine what kind of editor to show up when you begin edit, for example a date picker for DateTime columns. Finally, I have added four buttons two of them can be used to add or remove filters and the other two will communicate the changes you have made to the server. Here is the full source code of the DomainDataSourceFilteringControl. The XAML: <UserControl x:Class="PureServerSideFiltering.DomainDataSourceFilteringControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:telerikGrid="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.GridView" xmlns:telerik="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls" Width="300"> <Border x:Name="LayoutRoot" BorderThickness="1" BorderBrush="#FF8A929E" Padding="5" Background="#FFDFE2E5"> <Grid> <Grid.RowDefinitions> <RowDefinition Height="Auto"/> <RowDefinition Height="150"/> <RowDefinition Height="Auto"/> </Grid.RowDefinitions> <StackPanel Grid.Row="0" Margin="2" Orientation="Horizontal" HorizontalAlignment="Center"> <telerik:RadButton Name="addFilterButton" Click="OnAddFilterButtonClick" Content="Add Filter" Margin="2" Width="96"/> <telerik:RadButton Name="removeFilterButton" Click="OnRemoveFilterButtonClick" Content="Remove Filter" Margin="2" Width="96"/> </StackPanel> <telerikGrid:RadGridView Name="filtersGrid" Grid.Row="1" Margin="2" ItemsSource="{Binding FilterDescriptors}" AddingNewDataItem="OnFilterGridAddingNewDataItem" ColumnWidth="*" ShowGroupPanel="False" AutoGenerateColumns="False" CanUserResizeColumns="False" CanUserReorderColumns="False" CanUserFreezeColumns="False" RowIndicatorVisibility="Collapsed" IsFilteringAllowed="False" CanUserSortColumns="False"> <telerikGrid:RadGridView.Columns> <telerikGrid:GridViewComboBoxColumn DataMemberBinding="{Binding Operator}" UniqueName="Operator"/> <telerikGrid:GridViewDataColumn Header="Value" DataMemberBinding="{Binding Value.Value}" UniqueName="Value"/> </telerikGrid:RadGridView.Columns> </telerikGrid:RadGridView> <StackPanel Grid.Row="2" Margin="2" Orientation="Horizontal" HorizontalAlignment="Center"> <telerik:RadButton Name="filterButton" Click="OnApplyFiltersButtonClick" Content="Apply Filters" Margin="2" Width="96"/> <telerik:RadButton Name="clearButton" Click="OnClearFiltersButtonClick" Content="Clear Filters" Margin="2" Width="96"/> </StackPanel> </Grid> </Border> </UserControl> And the code-behind: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using Telerik.Windows.Controls.GridView; using System.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Data; namespace PureServerSideFiltering { /// <summary> /// A custom filtering control capable of filtering purely server-side. /// </summary> public partial class DomainDataSourceFilteringControl : UserControl, IFilteringControl { // The main player here. DomainDataSource domainDataSource; // This is the name of the property that this column displays. private string dataMemberName; // This is the type of the property that this column displays. private Type dataMemberType; /// <summary> /// Identifies the <see cref="IsActive"/> dependency property. /// </summary> /// <remarks> /// The state of the filtering funnel (i.e. full or empty) is bound to this property. /// </remarks> public static readonly DependencyProperty IsActiveProperty = DependencyProperty.Register( "IsActive", typeof(bool), typeof(DomainDataSourceFilteringControl), new PropertyMetadata(false)); /// <summary> /// Gets or sets a value indicating whether the filtering is active. /// </summary> /// <remarks> /// Set this to true if you want to lit-up the filtering funnel. /// </remarks> public bool IsActive { get { return (bool)GetValue(IsActiveProperty); } set { SetValue(IsActiveProperty, value); } } /// <summary> /// Gets or sets the domain data source. /// We need this in order to work on its FilterDescriptors collection. /// </summary> /// <value>The domain data source.</value> public DomainDataSource DomainDataSource { get { return this.domainDataSource; } set { this.domainDataSource = value; } } public System.Windows.Data.FilterDescriptorCollection FilterDescriptors { get { return this.DomainDataSource.FilterDescriptors; } } public DomainDataSourceFilteringControl() { InitializeComponent(); } public void Prepare(GridViewBoundColumnBase column) { this.LayoutRoot.DataContext = this; if (this.DomainDataSource == null) { // Sorry, but we need a DomainDataSource. Can't do anything without it. return; } // This is the name of the property that this column displays. this.dataMemberName = column.GetDataMemberName(); // This is the type of the property that this column displays. // We need this in order to see which FilterOperators to feed to the combo-box column. this.dataMemberType = column.DataType; // We will use our magic Type extension method to see which operators are applicable for // this data type. You can go to the extension method body and see what it does. ((GridViewComboBoxColumn)this.filtersGrid.Columns["Operator"]).ItemsSource = this.dataMemberType.ApplicableFilterOperators(); // This is very nice as well. We will tell the Value column its data type. In this way // RadGridView will pick up the best editor according to the data type. For example, // if the data type of the value is DateTime, you will be editing it with a DatePicker. // Nice! ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataType = this.dataMemberType; // Yet another nice feature. We will transfer the original DataFormatString (if any) to // the Value column. In this way if you have specified a DataFormatString for the original // column, you will see all filter values formatted accordingly. ((GridViewDataColumn)this.filtersGrid.Columns["Value"]).DataFormatString = column.DataFormatString; // This is important. Since our little filtersGrid will be bound to the entire collection // of this.domainDataSource.FilterDescriptors, we need to set a Telerik filter on the // grid so that it will display FilterDescriptor which are relevane to this column ONLY! Telerik.Windows.Data.FilterDescriptor columnFilter = new Telerik.Windows.Data.FilterDescriptor("PropertyPath" , Telerik.Windows.Data.FilterOperator.IsEqualTo , this.dataMemberName); this.filtersGrid.FilterDescriptors.Add(columnFilter); // We want to listen for this in order to activate and de-activate the UI funnel. this.filtersGrid.Items.CollectionChanged += this.OnFilterGridItemsCollectionChanged; } /// <summary> // Since the DomainDataSource is a little bit picky about adding uninitialized FilterDescriptors // to its collection, we will prepare each new instance with some default values and then // the user can change them later. Go to the event handler to see how we do this. /// </summary> void OnFilterGridAddingNewDataItem(object sender, GridViewAddingNewEventArgs e) { // We need to initialize the new instance with some values and let the user go on from here. System.Windows.Data.FilterDescriptor newFilter = new System.Windows.Data.FilterDescriptor(); // This is a must. It should know what member it is filtering on. newFilter.PropertyPath = this.dataMemberName; // Initialize it with one of the allowed operators. // TypeExtensions.ApplicableFilterOperators method for more info. newFilter.Operator = this.dataMemberType.ApplicableFilterOperators().First(); if (this.dataMemberType == typeof(DateTime)) { newFilter.Value.Value = DateTime.Now; } else if (this.dataMemberType == typeof(string)) { newFilter.Value.Value = "<enter text>"; } else if (this.dataMemberType.IsValueType) { // We need something non-null for all value types. newFilter.Value.Value = Activator.CreateInstance(this.dataMemberType); } // Let the user edit the new filter any way he/she likes. e.NewObject = newFilter; } void OnFilterGridItemsCollectionChanged(object sender, System.Collections.Specialized.NotifyCollectionChangedEventArgs e) { // We are active only if we have any filters define. In this case the filtering funnel will lit-up. this.IsActive = this.filtersGrid.Items.Count > 0; } private void OnApplyFiltersButtonClick(object sender, RoutedEventArgs e) { if (this.DomainDataSource.IsLoadingData) { return; } // Comment this if you want the popup to stay open after the button is clicked. this.ClosePopup(); // Since this.domainDataSource.AutoLoad is false, this will take into // account all filtering changes that the user has made since the last // Load() and pull the new data to the client. this.DomainDataSource.Load(); } private void OnClearFiltersButtonClick(object sender, RoutedEventArgs e) { if (this.DomainDataSource.IsLoadingData) { return; } // We want to remove ONLY those filters from the DomainDataSource // that this control is responsible for. this.DomainDataSource.FilterDescriptors .Where(fd => fd.PropertyPath == this.dataMemberName) // Only "our" filters. .ToList() .ForEach(fd => this.DomainDataSource.FilterDescriptors.Remove(fd)); // Bye-bye! // Comment this if you want the popup to stay open after the button is clicked. this.ClosePopup(); // After we did our housekeeping, get the new data to the client. this.DomainDataSource.Load(); } private void OnAddFilterButtonClick(object sender, RoutedEventArgs e) { if (this.DomainDataSource.IsLoadingData) { return; } // Let the user enter his/or her requirements for a new filter. this.filtersGrid.BeginInsert(); this.filtersGrid.UpdateLayout(); } private void OnRemoveFilterButtonClick(object sender, RoutedEventArgs e) { if (this.DomainDataSource.IsLoadingData) { return; } // Find the currently selected filter and destroy it. System.Windows.Data.FilterDescriptor filterToRemove = this.filtersGrid.SelectedItem as System.Windows.Data.FilterDescriptor; if (filterToRemove != null && this.DomainDataSource.FilterDescriptors.Contains(filterToRemove)) { this.DomainDataSource.FilterDescriptors.Remove(filterToRemove); } } private void ClosePopup() { System.Windows.Controls.Primitives.Popup popup = this.ParentOfType<System.Windows.Controls.Primitives.Popup>(); if (popup != null) { popup.IsOpen = false; } } } } Finally, we need to tell RadGridViews Columns to use this custom control instead of the default one. Here is how to do it: using System; using System.Collections.Generic; using System.Linq; using System.Net; using System.Windows; using System.Windows.Controls; using System.Windows.Documents; using System.Windows.Input; using System.Windows.Media; using System.Windows.Media.Animation; using System.Windows.Shapes; using System.Windows.Data; using Telerik.Windows.Data; using Telerik.Windows.Controls; using Telerik.Windows.Controls.GridView; namespace PureServerSideFiltering { public partial class MainPage : UserControl { public MainPage() { InitializeComponent(); this.grid.AutoGeneratingColumn += this.OnGridAutoGeneratingColumn; // Uncomment this if you want the DomainDataSource to start pre-filtered. // You will notice how our custom filtering controls will correctly read this information, // populate their UI with the respective filters and lit-up the funnel to indicate that // filtering is active. Go ahead and try it. this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("Title", System.Windows.Data.FilterOperator.Contains, "Assistant")); this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsGreaterThan, new DateTime(1998, 12, 31))); this.employeesDataSource.FilterDescriptors.Add(new System.Windows.Data.FilterDescriptor("HireDate", System.Windows.Data.FilterOperator.IsLessThanOrEqualTo, new DateTime(1999, 12, 31))); this.employeesDataSource.Load(); } /// <summary> /// First of all, we will need to replace the default filtering control /// of each column with out custom filtering control DomainDataSourceFilteringControl /// </summary> private void OnGridAutoGeneratingColumn(object sender, GridViewAutoGeneratingColumnEventArgs e) { GridViewBoundColumnBase dataColumn = e.Column as GridViewBoundColumnBase; if (dataColumn != null) { // We do not like ugly dates. if (dataColumn.DataType == typeof(DateTime)) { dataColumn.DataFormatString = "{0:d}"; // Short date pattern. // Notice how this format will be later transferred to the Value column // of the grid that we have inside the DomainDataSourceFilteringControl. } // Replace the default filtering control with our. dataColumn.FilteringControl = new DomainDataSourceFilteringControl() { // Let the control know about the DDS, after all it will work directly on it. DomainDataSource = this.employeesDataSource }; // Finally, lit-up the filtering funnel through the IsActive dependency property // in case there are some filters on the DDS that match our column member. string dataMemberName = dataColumn.GetDataMemberName(); dataColumn.FilteringControl.IsActive = this.employeesDataSource.FilterDescriptors .Where(fd => fd.PropertyPath == dataMemberName) .Count() > 0; } } } } The best part is that we are not only writing filters for the DomainDataSource we can read and load them. If the DomainDataSource has some pre-existing filters (like I have created in the code above), our control will read them and will populate its UI accordingly. Even the filtering funnel will light-up! Remember, the funnel is controlled by the IsActive property of our control. While this is just a basic implementation, the source code is absolutely yours and you can take it from here and extend it to match your specific business requirements. Below the main grid there is another debug grid. With its help you can monitor what filter descriptors are added and removed to the domain data source. Download Source Code. (You will have to have the AdventureWorks sample database installed on the default SQLExpress instance in order to run it.) Enjoy!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

How Mary Meeker’s Latest Findings May Make You Re-Imagine Commerce

- by Brenna Johnson-Oracle

0 0 1 954 5439 Endeca Technologies 45 12 6381 14.0 Normal 0 false false false EN-US JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:12.0pt; font-family:Cambria; mso-ascii-font-family:Cambria; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Cambria; mso-hansi-theme-font:minor-latin;} Today, Mary Meeker released her highly anticipated annual “Internet Trends” presentation for 2014. All 164 slides are jam-packed with pretty much everything you need to know about the state of the Internet. And as luck would have it, Oracle is staying ahead of these trends (but we’ll talk about that later). There were a few surprises, some stats to solidify what you likely already know, and Meeker’s novel observations about where we are all going. What interested me the most is not only how people are engaging in their personal lives, but how they engage with brands. As you could probably predict, Internet usage growth is slowing while tablet user and mobile data traffic growth continue their meteoric rise around the globe, with tremendous growth in underpenetrated markets like China, India, Brazil and Indonesia. Now hold those the “Internet is dead” comments. Keep in mind there’s still plenty of room to grow, and a multiscreen model is Meeker’s vision for our future. Despite 1.5x YOY growth for mobile traffic, mobile still only makes up about 23% of all traffic today. With tablet shipments easily outpacing figures for PCs even at their height (in 2007), mobile will only continue on it’s path, but won’t be everything to everyone. Mobile won’t replace every touchpoint, it’s just created our shorter attention spans and demand for simpler, more personal experiences. As Meeker points out TVs, tablets, PCs, and smartphones are used for different activities at present, but lines will blur (for example, 84% of smartphones owners use their device while watching TV). Day-to-day activities are being re-imagining through simple, beautiful user experiences. It seems like every day I discover a new way a brand/site/app made the most mundane or mounting task enjoyable and frictionless – and I’m not alone. Meeker points out the evolution of how we do everything from how we communicate, get information, use money, meet someone, get places, order a meal, and consume media is all done through new user interfaces that make day-to-day tasks simpler. This movement has caused just about everyone’s patience for a poor UX to take a nosedive. And it’s not just the digital user experience, technology is making a lot of people’s offline lives easier, and less expensive. Today 47% of online shopping utilizes free shipping— nearly half. And Meeker predicts same day local delivery will be the “next big thing” (and you can take a guess on who will own that). Content, Community and Commerce creates the “Internet Trifecta.” Meeker pointed out that when content, communities and commerce occur in a single experience it’s embraced by consumers, which translates to big dollars for brands. The magic happens when consumers can get inspired, research, and buy in a single experience. As the buying cycle has changed and touchpoints (Web, mobile, social, store) are no longer tied to “roles” or steps in the customer journey, brands must make all experiences (content and commerce) available in a single, adaptable experience. (We at Oracle Commerce have a lot to say on this topic – stay tuned!) And in what Meeker calls the “biggest re-imagination of all:” consumers enabled with smartphones and sensors are creating troves of findable and sharable data, which she says is in the early stages, by growing rapidly. She notes that transparency and patterns of consumers with this hardware (FYI - there are up to 10 sensors embedded in smartphones now) has created a Big Data treasure chest to be mined to improve business and the life of the consumer. The opportunities are endless. So what does it all mean for a company doing business online? Start thinking about how you can: Re-imagine your experience. Not your online experience and your mobile experience and your social experience – your overall experience. When consumers can research, buy, and advocate from anywhere (and their attention spans are at an all-time low) channels don’t exist. Enable simple and beautiful interactions informed by all of the online and offline data you leverage across your enterprise. Ethically leverage the endless supply of data (user generated content, clicks, purchases, in-store behavior, social activity) to make experiences more beautiful, more accurate, and more personalized (not to mention, more lucrative for you). Re-imagine content and commerce. Content and commerce must co-exist in a single destination where shoppers can get inspired, explore, research, share, and purchase in a collective experience. Think of how you can deliver an experience where all types of experiences (brand stories and commerce) adapt to every customer need. (Look for more on this topic coming soon). Re-imagine your reach. Look to Meeker’s findings to see how the global appetite for digital experiences is growing, but under-served in many places (i.e.: India, Mexico, Indonesia, Brazil, Philippines, etc.). Growing your online business to a new geography doesn’t have to mean starting from scratch or having an entirely new team manage the new endeavor. Expand using what you’ve already built in a multisite framework, with global language support. And of course, make sure it’s optimized for mobile! Re-imagine the possible. After every Meeker report, I’m always left with the thought “we are just at the beginning.” Everyday there is more data, more possibilities, more online consumers, and more opportunities to use new latest technology to get closer to your customers and be more successful. There’s a lot going on in our Product Development and Product Innovations groups to automate innovation for our customers, so that they can continue to stay ahead of these trends, without disrupting their business. Check out a recent interview with our Innovations Team on some of these new possibilities. Staying on track despite the seemingly endless possibilities out there is the hard part. Prioritizing where you will focus based on your unique brand promise, customer and goals is what you do best. To learn how Oracle Commerce can help your business achieve your goals check out oracle.com/commerce. Check out Meeker’s entire report here.

Read the article

Solaris 11 Launch Blog Carnival Roundup

- by constant

Solaris 11 is here! And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter go to eleven. Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure: Getting Started/Overview A lot of people speculated that the official launch of Solaris 11 would be on 11/11 (whatever way you want to turn it), but it actually happened two days earlier. Larry Wake himself offers 11 Reasons Why Oracle Solaris 11 11/11 Isn't Being Released on 11/11/11. Then, Larry goes on with a summary: Oracle Solaris 11: The First Cloud OS gives you a short and sweet rundown of what the major new features of Solaris 11 are. Jeff Victor has his own list of What's New in Oracle Solaris 11. A popular Solaris 11 meme is to write a blog post about 11 favourite features: Jim Laurent's 11 Reasons to Love Solaris 11, Darren Moffat's 11 Favourite Solaris 11 Features, Mike Gerdt's 11 of My Favourite Things! are just three examples of "11 Favourite Things..." type blog posts, I'm sure many more will follow... More official overview content for Solaris 11 is available from the Oracle Tech Network Solaris 11 Portal. Also, check out Rick Ramsey's blog post Solaris 11 Resources for System Administrators on the OTN Blog and his secret 5 Commands That Make Solaris Administration Easier post from the OTN Garage. (Automatic) Installation and the Image Packaging System (IPS) The brand new Image Packaging System (IPS) and the Automatic Installer (IPS), together with numerous other install/packaging/boot/patching features are among the most significant improvements in Solaris 11. But before installing, you may wonder whether Solaris 11 will support your particular set of hardware devices. Again, the OTN Garage comes to the rescue with Rick Ramsey's post How to Find Out Which Devices Are Supported By Solaris 11. Included is a useful guide to all the first steps to get your Solaris 11 system up and running. Tim Foster had a whole handful of blog posts lined up for the launch, teaching you everything you need to know about IPS but didn't dare to ask: The IPS System Repository, IPS Self-assembly - Part 1: Overlays and Part 2: Multiple Packages Delivering Configuration. Watch out for more IPS posts from Tim! If installing packages or upgrading your system from the net makes you uneasy, then you're not alone: Jim Laurent will tech you how Building a Solaris 11 Repository Without Network Connection will make your life easier. Many of you have already peeked into the future by installing Solaris 11 Express. If you're now wondering whether you can upgrade or whether a fresh install is necessary, then check out Alan Hargreaves's post Upgrading Solaris 11 Express b151a with support to Solaris 11. The trick is in upgrading your pkg(1M) first. Networking One of the first things to do after installing Solaris 11 (or any operating system for that matter), is to set it up for networking. Solaris 11 comes with the brand new "Network Auto-Magic" feature which can figure out everything by itself. For those cases where you want to exercise a little more control, Solaris 11 left a few people scratching their heads. Fortunately, Tschokko wrote up this cool blog post: Solaris 11 manual IPv4 & IPv6 configuration right after the launch ceremony. Thanks, Tschokko! And Milek points out a long awaited networking feature in Solaris 11 called Solaris 11 - hostmodel, which I know for a fact that many customers have looked forward to: How to "bind" a Solaris 11 system to a specific gateway for specific IP address it is using. Steffen Weiberle teaches us how to tune the Solaris 11 networking stack the proper way: ipadm(1M). No more fiddling with ndd(1M)! Check out his tutorial on Solaris 11 Network Tunables. And if you want to get even deeper into the networking stack, there's nothing better than DTrace. Alan Maguire teaches you in: DTracing TCP Congestion Control how to probe deeply into the Solaris 11 TCP/IP stack, the TCP congestion control part in particular. Don't miss his other DTrace and TCP related blog posts! DTrace And there we are: DTrace, the king of all observability tools. Long time DTrace veteran and co-author of The DTrace book*, Brendan Gregg blogged about Solaris 11 DTrace syscall provider changes. BTW, after you install Solaris 11, check out the DTrace toolkit which is installed by default in /usr/dtrace/DTT. It is chock full of handy DTrace scripts, many of which contributed by Brendan himself! Security Another big theme in Solaris 11, and one that is crucial for the success of any operating system in the Cloud is Security. Here are some notable posts in this category: Darren Moffat starts by showing us how to completely get rid of root: Completely Disabling Root Logins on Solaris 11. With no root user, there's one major entry point less to worry about. But that's only the start. In Immutable Zones on Encrypted ZFS, Darren shows us how to double the security of your services: First by locking them into the new Immutable Zones feature, then by encrypting their data using the new ZFS encryption feature. And if you're still missing sudo from your Linux days, Darren again has a solution: Password (PAM) caching for Solaris su - "a la sudo". If you're wondering how much compute power all this encryption will cost you, you're in luck: The Solaris X86 AESNI OpenSSL Engine will make sure you'll use your Intel's embedded crypto support to its fullest. And if you own a brand new SPARC T4 machine you're even luckier: It comes with its own SPARC T4 OpenSSL Engine. Dan Anderson's posts show how there really is now excuse not to encrypt any more... Developers Solaris 11 has a lot to offer to developers as well. Ali Bahrami has a series of blog posts that cover diverse developer topics: elffile: ELF Specific File Identification Utility, Using Stub Objects and The Stub Proto: Not Just For Stub Objects Anymore to name a few. BTW, if you're a developer and want to shape the future of Solaris 11, then Vijay Tatkar has a hint for you: Oracle (Sun Systems Group) is hiring! Desktop and Graphics Yes, Solaris 11 is a 100% server OS, but it can also offer a decent desktop environment, especially if you are a developer. Alan Coopersmith starts by discussing S11 X11: ye olde window system in today's new operating system, then Calum Benson shows us around What's new on the Solaris 11 Desktop. Even accessibility is a first-class citizen in the Solaris 11 user interface. Peter Korn celebrates: Accessible Oracle Solaris 11 - released! Performance Gone are the days of "Slowaris", when Solaris was among the few OSes that "did the right thing" while others cut corners just to win benchmarks. Today, Solaris continues doing the right thing, and it delivers the right performance at the same time. Need proof? Check out Brian's BestPerf blog with continuous updates from the benchmarking lab, including Recent Benchmarks Using Oracle Solaris 11! Send Me More Solaris 11 Launch Articles! These are just a few of the more interesting blog articles that came out around the Solaris 11 launch, I'm sure there are many more! Feel free to post a comment below if you find a particularly interesting blog post that hasn't been listed so far and share your enthusiasm for Solaris 11! *Affiliate link: Buy cool stuff and support this blog at no extra cost. We both win! var flattr_uid = '26528'; var flattr_tle = 'Solaris 11 Launch Blog Carnival Roundup'; var flattr_dsc = '<strong>Solaris 11 is here!</strong>And together with the official launch activities, a lot of Oracle and non-Oracle bloggers contributed helpful and informative blog articles to help your datacenter <a href="http://en.wikipedia.org/wiki/Up_to_eleven">go to eleven</a>.Here are some notable blog postings, sorted by category for your Solaris 11 blog-reading pleasure:'; var flattr_tag = 'blogging,digest,Oracle,Solaris,solaris,solaris 11'; var flattr_cat = 'text'; var flattr_url = 'http://constantin.glez.de/blog/2011/11/solaris-11-launch-blog-carnival-roundup'; var flattr_lng = 'en_GB'

Read the article

Authorize.Net, Silent Posts, and URL Rewriting Don't Mix

The too long, didn't read synopsis: If you use Authorize.Net and its silent post feature and it stops working, make sure that if your website uses URL rewriting to strip or add a www to the domain name that the URL you specify for the silent post matches the URL rewriting rule because Authorize.Net's silent post feature won't resubmit the post request to URL specified via the redirect response. I have a client that uses Authorize.Net to manage and bill customers. Like many payment gateways, Authorize.Net supports recurring payments. For example, a website may charge members a monthly fee to access their services. With Authorize.Net you can provide the billing amount and schedule and at each interval Authorize.Net will automatically charge the customer's credit card and deposit the funds to your account. You may want to do something whenever Authorize.Net performs a recurring payment. For instance, if the recurring payment charge was a success you would extend the customer's service; if the transaction was denied then you would cancel their service (or whatever). To accomodate this, Authorize.Net offers a silent post feature. Properly configured, Authorize.Net will send an HTTP request that contains details of the recurring payment transaction to a URL that you specify. This URL could be an ASP.NET page on your server that then parses the data from Authorize.Net and updates the specified customer's account accordingly. (Of course, you can always view the history of recurring payments through the reporting interface on Authorize.Net's website; the silent post feature gives you a way to programmatically respond to a recurring payment.) Recently, this client of mine that uses Authorize.Net informed me that several paying customers were telling him that their access to the site had been cut off even though their credit cards had been recently billed. Looking through our logs, I noticed that we had not shown any recurring payment log activity for over a month. I figured one of two things must be going on: either Authorize.Net wasn't sending us the silent post requests anymore or the page that was processing them wasn't doing so correctly. I started by verifying that our Authorize.Net account was properly setup to use the silent post feature and that it was pointing to the correct URL. Authorize.Net's site indicated the silent post was configured and that recurring payment transaction details were being sent to http://example.com/AuthorizeNetProcessingPage.aspx. Next, I wanted to determine what information was getting sent to that URL.The application was setup tolog the parsed results of the Authorize.Net request, such as what customer the recurring payment applied to; however,we were not logging the actual HTTP request coming from Authorize.Net. I contacted Authorize.Net's support to inquire if they logged the HTTP request send via the silent post feature and was told that they did not. I decided to add a bit of code to log the incoming HTTP request, which you can do by using the Request object's SaveAs method. This allowed me to saveevery incoming HTTP request to the silent post page to a text file on the server. Upon the next recurring payment, I was able to see the HTTP request being received by the page: GET /AuthorizeNetProcessingPage.aspx HTTP/1.1Connection: CloseAccept: */*Host: www.example.com That was it. Two things alarmed me: first, the request was obviously a GET and not a POST; second, there was no POST body (obviously), which is where Authorize.Net passes along thedetails of the recurring payment transaction.What stuck out was the Host header, which differed slightly from the silent post URL configured in Authorize.Net. Specifically, the Host header in the above logged request pointed to www.example.com, whereas the Authorize.Net configuration used example.com (no www). About a month ago - the same time these recurring payment transaction detailswere no longer being processed by our ASP.NET page - we had implemented IIS 7's URL rewriting feature to permanently redirect all traffic to example.com to www.example.com. Could that be the problem? I contacted Authorize.Net's support again and asked them if their silent post algorithmwould follow the301HTTP response and repost the recurring payment transaction details. They said, Yes, the silent post would follow redirects. Their reports didn't jive with my observations, so I went ahead and updated our Authorize.Net configuration to point to http://www.example.com/AuthorizeNetProcessingPage.aspx instead of http://example.com/AuthorizeNetProcessingPage.aspx. And, I'm happy to report, recurring payments and correctly being processed again! If you use Authorize.Net and the silent post feature, and you notice that your processing page is not longer working, make sure you are not using any URL rewriting rules that may conflict with the silent post URL configuration. Hope this saves someone the time it took me to get to the bottom of this. Happy Programming!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

TFS, G.I. Joe and Under-doing

If I were to rank the most consistently irritating parts of my work day, using TFS would come in first by a wide margin. Even repeated network outages this week seem like a pleasant reprieve from this monolithic beast. This is not a reflexive anti-Microsoft feeling, that attitude just wouldnt work for a consultant who does .NET development. It is also not an utter dismissal of TFS as worthless; Ive seen people use it effectively on several projects. So why? Ill start with a laundry list of shortcomings. An out of the box UI for work items that is insultingly bad, a source control system that is confoundingly fragile when handling merges, folder renames and long file names, the arcane XML wizardry necessary to customize a template and a build system that adds an extra layer of oddness on top of msbuild. Im sure my legion of readers will soon point out to me how I can work around all these issues, how this is fixed in TFS 2010 or with this add-in, and how once you have everything set up, youre fine. And theyd be right, any one of these problems could be worked around. If not dirty laundry, what else? I thought about it for a while, and came to the conclusion that TFS is so irritating to me because it represents a vision of software development that I find unappealing. To expand upon this, lets start with some wisdom from those great PSAs at the end of the G.I. Joe cartoons of the 80s: Now you know, and knowing is half the battle. In software development, Id go further and say knowing is more than half the battle. Understanding the dimensions of the problem you are trying to solve, the needs of the users, the value that your software can provide are more than half the battle. Implementation of this understanding is not easy, but it is not even possible without this knowledge. Assuming we have a fixed amount of time and mental energy for any project, why does this spell trouble for TFS? If you think about what TFS is doing, its offering you a huge array of options to track the day to day implementation of your project. From tasks, to code churn, to test coverage. All valuable metrics, but only in exchange for valuable time to get it all working. In addition, when you have a shiny toy like TFS, the temptation is to feel obligated to use it. So the push from TFS is to encourage a project manager and team to focus on process and metrics around process. You can get great visibility, and graphs to show your project stakeholders, but none of that is important if you are not implementing the right product. Not just unimportant, these activities can be harmful as they drain your time and sap your creativity away from the rest of the project. To be more concrete, lets suppose your organization has invested the time to create a template for your projects and trained people in how to use it, so there is no longer a big investment of time for each project to get up and running. First, Id challenge if that template could be specific enough to be full featured and still applicable for any project. Second, the very existence of this template would be a indication to a project manager that the success of their project was somehow directly related to fitting management of that project into this format. Again, while the capabilities are wonderful, the mirage is there; just get everything into TFS and your project will run smoothly. Ill close the loop on this first topic by proposing a thought experiment. Think of the projects youve worked on. How many times have you been chagrined to discover youve implemented the wrong feature, misunderstood how a feature should work or just plain spent too much time on a screen that nobody uses? That sounds like a really worthwhile area to invest time in improving. How about going back to these projects and thinking about how many times you wished you had optimized the state change flow of your tasks or been embarrassed to not have a code churn report linked back to the latest changeset? With thanks to the Real American Heroes, Ill move on to a more current influence, that of the developers at 37signals, and their philosophy towards software development. This philosophy, fully detailed in the books Getting Real and Rework, is a vision of software that under does the competition. This is software that is deliberately limited in functionality in order to concentrate fully on making sure ever feature that is there is awesome and needed. Why is this relevant? Well, in one of those fun seeming paradoxes in life, constraints can be a spark for creativity. Think Twitter, the small screen of an iPhone, the limitations of HTML for applications, the low memory limits of older or embedded system. As long as there is some freedom within those constraints, amazing things emerge. For project management, some of the most respected people in the industry recommend using just index cards, pens and tape. They argue that with change the constant in software development, your process should be as limited (yet rigorous) as possible. Looking at TFS, this is not a system designed to under do anybody. It is a big jumble of components and options, with every feature you could think of. Predictably this means many basic functions are hard to use. For task management, many people just use an Excel spreadsheet linked up to TFS. Not a stirring endorsement of the tooling there. TFS as a whole would be far more appealing to me if there was less of it, but better. Id cut 50% of the features to make the other half really amaze and inspire me. And thats really the heart of the matter. TFS has great promise and I want to believe it can work better. But ultimately it focuses your attention on a lot of stuff that doesnt really matter and then clamps down your creativity in a mess of forms and dialogs obscuring what does. --- Relevant Links --- All those great G.I. Joe PSAs are on YouTube, including lots of mashed up versions. A simple Google search will get you on the right track.Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

Multi-tenant ASP.NET MVC - Views

- by zowens

Part I – Introduction Part II – Foundation Part III – Controllers So far we have covered the basic premise of tenants and how they will be delegated. Now comes a big issue with multi-tenancy, the views. In some applications, you will not have to override views for each tenant. However, one of my requirements is to add extra views (and controller actions) along with overriding views from the core structure. This presents a bit of a problem in locating views for each tenant request. I have chosen quite an opinionated approach at the present but will coming back to the “views” issue in a later post. What’s the deal? The path I’ve chosen is to use precompiled Spark views. I really love Spark View Engine and was planning on using it in my project anyways. However, I ran across a really neat aspect of the source when I was having a look under the hood. There’s an easy way to hook in embedded views from your project. There are solutions that provide this, but they implement a special Virtual Path Provider. While I think this is a great solution, I would rather just have Spark take care of the view resolution. The magic actually happens during the compilation of the views into a bin-deployable DLL. After the views are compiled, the are simply pulled out of the views DLL. Each tenant has its own views DLL that just has “.Views” appended after the assembly name as a convention. The list of reasons for this approach are quite long. The primary motivation is performance. I’ve had quite a few performance issues in the past and I would like to increase my application’s performance in any way that I can. My customized build of Spark removes insignificant whitespace from the HTML output so I can some some bandwidth and load time without having to deal with whitespace removal at runtime. How to setup Tenants for the Host In the source, I’ve provided a single tenant as a sample (Sample1). This will serve as a template for subsequent tenants in your application. The first step is to add a “PostBuildStep” installer into the project. I’ve defined one in the source that will eventually change as we focus more on the construction of dependency containers. The next step is to tell the project to run the installer and copy the DLL output to a folder in the host that will pick up as a tenant. Here’s the code that will achieve it (this belongs in Post-build event command line field in the Build Events tab of settings) %systemroot%\Microsoft.NET\Framework\v4.0.30319\installutil "$(TargetPath)" copy /Y "$(TargetDir)$(TargetName)*.dll" "$(SolutionDir)Web\Tenants\" copy /Y "$(TargetDir)$(TargetName)*.pdb" "$(SolutionDir)Web\Tenants\" The DLLs with a name starting with the target assembly name will be copied to the “Tenants” folder in the web project. This means something like MultiTenancy.Tenants.Sample1.dll and MultiTenancy.Tenants.Sample1.Views.dll will both be copied along with the debug symbols. This is probably the simplest way to go about this, but it is a tad inflexible. For example, what if you have dependencies? The preferred method would probably be to use IL Merge to merge your dependencies with your target DLL. This would have to be added in the build events. Another way to achieve that would be to simply bypass Visual Studio events and use MSBuild. I also got a question about how I was setting up the controller factory. Here’s the basics on how I’m setting up tenants inside the host (Global.asax) protected void Application_Start() { RegisterRoutes(RouteTable.Routes); // create a container just to pull in tenants var topContainer = new Container(); topContainer.Configure(config => { config.Scan(scanner => { scanner.AssembliesFromPath(Path.Combine(Server.MapPath("~/"), "Tenants")); scanner.AddAllTypesOf<IApplicationTenant>(); }); }); // create selectors var tenantSelector = new DefaultTenantSelector(topContainer.GetAllInstances<IApplicationTenant>()); var containerSelector = new TenantContainerResolver(tenantSelector); // clear view engines, we don't want anything other than spark ViewEngines.Engines.Clear(); // set view engine ViewEngines.Engines.Add(new TenantViewEngine(tenantSelector)); // set controller factory ControllerBuilder.Current.SetControllerFactory(new ContainerControllerFactory(containerSelector)); } The code to setup the tenants isn’t actually that hard. I’m utilizing assembly scanners in StructureMap as a simple way to pull in DLLs that are not in the AppDomain. Remember that there is a dependency on the host in the tenants and a tenant cannot simply be referenced by a host because of circular dependencies. Tenant View Engine TenantViewEngine is a simple delegator to the tenant’s specified view engine. You might have noticed that a tenant has to define a view engine. public interface IApplicationTenant { .... IViewEngine ViewEngine { get; } } The trick comes in specifying the view engine on the tenant side. Here’s some of the code that will pull views from the DLL. protected virtual IViewEngine DetermineViewEngine() { var factory = new SparkViewFactory(); var file = GetType().Assembly.CodeBase.Without("file:///").Replace(".dll", ".Views.dll").Replace('/', '\\'); var assembly = Assembly.LoadFile(file); factory.Engine.LoadBatchCompilation(assembly); return factory; } This code resides in an abstract Tenant where the fields are setup in the constructor. This method (inside the abstract class) will load the Views assembly and load the compilation into Spark’s “Descriptors” that will be used to determine views. There is some trickery on determining the file location… but it works just fine. Up Next There’s just a few big things left such as StructureMap configuring controllers with a convention instead of specifying types directly with container construction and content resolution. I will also try to find a way to use the Web Forms View Engine in a multi-tenant way we achieved with the Spark View Engine without using a virtual path provider. I will probably not use the Web Forms View Engine personally, but I’m sure some people would prefer using WebForms because of the maturity of the engine. As always, I love to take questions by email or on twitter. Suggestions are always welcome as well! (Oh, and here’s another link to the source code).

Read the article

Rob Blackwell on interoperability and Azure

- by Eric Nelson

At QCon in March we had a sample Azure application implemented in both Java and Ruby to demonstrate that the Windows Azure Platform is not just about .NET. The following is an interesting interview with Rob Blackwell, the R&D director of the partner who implemented the application. UK Interoperability Team Interviews Rob Blackwell, R&D Director at Active Web Solutions. Is Microsoft taking interoperability seriously? Yes. In the past, I think Microsoft has, quite rightly come in for criticism, but architects and developers should look at this again. The Interoperability Bridges site (http://www.interoperabilitybridges.com/ ) shows a wide range of projects that allow interoperability from Java, Ruby and PHP for example. The Windows Azure platform has been architected with interoperable APIs in mind. It's straightforward to access the various storage facilities from just about any language or platform. Azure compute is capable of running more than just C# applications! Why is interoperability important to you? My company provides consultancy and bespoke development services. We're a Microsoft Gold Partner, but we live in the real world where companies have a mix of technologies provided by a variety of vendors. When developing an enterprise software solution, you rarely have a completely blank canvas. We often see integration scenarios where we need to exchange data with legacy systems. It's not unusual to see modern Silverlight applications being built on top of Java or Mainframe based back ends. Could you give us some examples of where interoperability has been important for your projects? We developed an innovative Sea Safety system for the RNLI Lifeboats here in the UK. Commercial Fishing is one of the most dangerous professions and we helped developed the MOB Guardian System which uses satellite technology and man overboard devices to raise the alarm when a fisherman gets into trouble. The solution is implemented in .NET running on Windows, but without interoperable standards, it would have been impossible to communicate with the satellite gateway technology. For more information, please see the case study: http://www.microsoft.com/casestudies/Case_Study_Detail.aspx?CaseStudyID=4000005892 More recently, we were asked to build a web site to accompany the QCon 2010 conference in London to help demonstrate and promote interoperability. We built the site using Java and Restlet and hosted it in Windows Azure Compute. The site accepts feedback from visitors and all the data is stored in Windows Azure Storage. We also ported the application to Ruby on Rails for demonstration purposes. Visitors to the stand were surprised that this was even possible. Why should Java developers be interested in Windows Azure? Windows Azure Storage consists of Blobs, Queues and Tables. The storage is scalable, durable, secure and cost-effective. Using the WindowsAzure4j library, it's easy to use, and takes just a few lines of code. If you are writing an application with large data storage requirements, or you want an offsite backup, it makes a lot of sense. Running Java applications in Azure Compute is straightforward with tools like the Tomcat Solution Accelerator (http://code.msdn.microsoft.com/winazuretomcat )and AzureRunMe (http://azurerunme.codeplex.com/ ). The Windows Azure AppFabric Service Bus can also be used to connect heterogeneous systems running on different networks and in different data centres. How can The Service Bus be considered an interoperability solution? I think that the Windows Azure AppFabric Service Bus is one of Microsoft’s best kept secrets. Think of it as “a globally scalable application plumbing kit in the sky”. If you have used Enterprise Service Buses before, you’ll be familiar with the concept. Applications can connect to the service bus to securely exchange data – these can be point to point or multicast links. With the AppFabric Service Bus, the applications can exist anywhere that has access to the Internet and the connections can traverse firewalls. This makes it easy to extend or scale your application or reach out to other networks and technologies. For example, let’s say you have a SQL Server database running on premises and you want to expose the data to a Java application running in the cloud. You could set up a point to point Service Bus connection and use JDBC. Traditionally this would have been difficult or impossible without punching holes in firewalls and compromising security. Rob Blackwell is R&D Director at Active Web Solutions, www.aws.net , a Microsoft Gold Partner specialising in leading edge software solutions. He is an occasional writer and conference speaker and blogs at www.robblackwell.org.uk Related Links: UK Azure Online Community – join today. UK Windows Azure Site Start working with Windows Azure

Read the article

SQLAuthority News – Community Tech Days – A SQL Legends in Ahmedabad – December 11, 2010

- by pinaldave

Ahmedabad is going to be fortunate city again on December 11. We are going to have SQL Server Legends present at the prestigious event of Community Tech Days in Ahmedabad. The venue details are as following: H K Hall, H K College Campus, Near Handloom House, Opp. Natraj Cinema, Ashram Road, Ahmedabad – 380009 Click here to Registration for the event. Agenda of the event is as following. 10:15am – 10:30am Welcome – Pinal Dave 10:30am – 11:15am SQL Tips and Tricks for .NET Developers by Jacob Sebastian 11:15am – 11:30am Tea Break 11:30am – 12:15pm Best Database Practice for SharePoint Server by Pinal Dave 12:15pm – 01:00pm Self Service Business Intelligence by Rushabh Mehta 01:00pm – 02:00pm Lunch 02:00pm – 02:45pm Managing your future, Managing your time by Vinod Kumar 02:45pm – 03:30pm Windows Azure News and Introducing Storage Services by Mahesh Devjibhai Dhola 03:30pm – 03:45pm Tea Break 03:45pm – 04:30pm Improve Silverlight application with Threads and MEF by Prabhjot Singh Bakshi 04:30pm – 04:45pm Thank you – Mahesh Devjibhai Dhola Ahmedabad considers itself extremely fortunate when there are SQL Legends presenting on various subjects in front of community. Here is brief introduction about them in my own words. (Their names are in order of the agenda). 1) Jacob Sebastian (SQL Server MVP) – This person needs no introduction. Every developer and programmer in Ahmedabad and India knows him. He is the one man who is founder of various community-related ideas like SQL Challenges, SQL Quiz and BeyondRelational. He works with me on all the community-related activities; we are extremely good friends. 2) Rushabh Mehta (SQL Server MVP) – If you use SQL Server – you know this man. He is the President of SQL Server of Professional Association (PASS) and one of the leading Business Intelligence (BI) Experts renowned in the world. He has blessed Ahmedabad once before and now doing once again this year. 3) Vinod Kumar (Microsoft Evangelist – SQL Server & BI) – Ahmedabad remembers him very well. During his last visit to Ahmedabad, a fight had almost broke outside the hall amidst the rush to listen him. There were more people standing and listening to him than those who were seated. This is one man Ahmedabad will never forget. 4) and Myself. I will not rate myself in the league of abovementioned experts, but I must say that I am fortunate to have friends like those above. We also have two strong .NET presenters – Mahesh and Prabhjot. During this event, there will be plenty of giveaways, lots of fun, demos and pure technical talk, specifically no marketing and promotion – just pure technical talk. The most interesting part is that all the SQL Legends – Jacob, Rushabh and Vinod are for sure presenting on SQL Server but with a twist. Jacob – He is going to talk about .NET and SQL – Optimization Techniques Rushabh – He is going to talk about SQL and BI – Self Service BI Vinod – He is going to talk about professional development of developers – Managing Time Pinal – Best Practices for SharePoint Database Administrators – SharePoint DBA – I have presented this session earlier. I promise this event is going to be one of the best events held ever. You can read about the earlier event over here. ?Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, MVP, Pinal Dave, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQLAuthority News, T SQL, Technology

Read the article

At the Java DEMOgrounds - JavaFX

- by Janice J. Heiss

JavaFX has made rapid progress in the last year, as is evidenced by the wealth of demos on display. A few questions appear to be prominent in the minds of JavaFX enthusiasts. Here are some questions with answers provided by Oracle’s JavaFX team.When will the rest of the JavaFX code be available in open source?Oracle has started to open source JavaFX. The existing platform code will finish being committed to OpenJFX by the end of the year.Why should I use JavaFX instead of HTML5?We see JavaFX as complementary to HTML5, and most companies we talk to react positively once they understand how they can benefit from a hybrid solution. As most HTML5 developers will tell you, the biggest obstacle to deploying HTML5 applications is fragmentation. JavaFX offers a convenient way to render HTML and JavaScript within its WebView component, which provides the same level of quality and features across Windows, Mac, and Linux. Additionally, JavaScript in WebView can make calls into the Java code, and vice versa, allowing developers to tap into the best of both worlds.What is the market penetration of JavaFX? It is currently limited, as we've just made available JavaFX on Mac and Linux in August, but we expect JavaFX to be present on millions of desktop-type systems now that JavaFX is included as part of the JRE. We have also significantly lowered the level of effort required to deploy an application bundling the JRE and JavaFX runtime libraries. Finally, we are seeing a lot of interest by companies operating in the embedded market, who have found it hard to develop compelling UIs with existing technologies.Below are summaries of JavaFX Demos on display at JavaOne 2012:JavaFX EnsembleEnsemble is a collection of over 100 JavaFX samples packaged as a JavaFX application. This demo is especially useful to those new to JavaFX, or those not familiar with its latest features (e.g. canvas, color picker). Ensemble is the reference for getting familiar with JavaFX functionality. Each sample can be run from within Ensemble, and the API for each sample, as well as the source code are available alongside the sample.The samples source code can be saved as a NetBeans project for convenience purposes, or can be copied as is in any other Java IDE. The version of Ensemble shown is packaged as a native Windows application, including the JRE and JavaFX libraries. It was created with the JavaFX packager, which provides multiple packaging options, and frees developers from the cumbersome and error-prone process of packaging a Java application.FX Experience ToolsFX Experience Tools is a JavaFX application that provides different utilities to create new skins for your JavaFX applications. One of the most powerful features of JavaFX is the ability to skin applications via CSS. Since not all Java developers are familiar with CSS, these utilities are a great starting point to create custom skins. JavaFX allows developers to easily customize the look and feel of their applications through CSS. FX Experience Tools makes it easy to create new themes for JavaFX applications, even if you are not familiar with CSS. FX Experience Tools is a JavaFX application packaged as a native application including the JRE and JavaFX runtime libraries. FX Experience tools shows how this type of deployment simplifies the packaging of Java applications without requiring developers to master the intricacies of Java application packaging. The download site for FX Experience Tools is http://fxexperience.com/2012/03/announcing-fx-experience-tools/ JavaFX Scene BuilderJavaFX Scene Builder is a visual layout tool that lets users quickly design the UI of your JavaFX application, without coding. Users can drag and drop UI components, modify their properties, apply style sheets, and the FXML code they create for the layout is automatically generated in the background. The result is an FXML file that can then be combined with a Java project by binding the UI to the application’s logic. Developers can easily create user interfaces for their application, as well as separate the application’s UI from the application logic for easier maintenance. Attendees can get this app by going to javafx.com and checking the link at top of the “Overview” page.Scene Builder allows developers to easily layout JavaFX UI controls, charts, shapes, and containers, so that you can quickly prototype user interfaces. It generates FXML, an XML-based markup language that enables users to define an application’s user interface, separately from the application logic. Scene Builder can be used in combination with any Java IDE, but is more tightly integrated with NetBeans IDE. It is written as a JavaFX application, with native desktop integration on Windows and Mac OS X. It’s a perfect example of a JavaFX application packages as a native application.Scene Builder is available for your preferred development platform. Besides the GA release on Windows and Mac, a Developer Preview of Scene Builder for Linux has just been made available.Scenic ViewScenic View is a tool that can be used to understand the current state of your application UI, and to also easily manipulate properties of the scenegraph without having to keep editing your code. Creating UIs is a complex process, and it can be hard and tedious detecting these issues, editing the code, and then compiling it to test the app again. Scenic View is a great diagnostics tool that helps developers identify these issues and correct them at runtime.Attendees can get Scenic View by going to javafx.com, selecting the “Community” tab, and clicking the link under the “Third Party Tools and Utilities” section.Scenic View allows developers to easily examine the state of a JavaFX application scenegraph while the application is running. Some of the latest features added to Scenic View include event monitoring, javadoc browsing, and contextual menus. The download site for Scenic View is available here: http://fxexperience.com/scenic-view/ Conference TourConference Tour is an application that lets users discover some of the major Java conferences throughout the world. The Conference Tour application shows how simple it is to mix JavaFX and HTML5 into a single, interactive application. Attendees get Conference Tour here.JavaFX includes a Web engine based on Webkit that provides a consistent web interface to render HTML5 across operating systems, within a JavaFX application. JavaFX features a bi-directional bridge that allows Java APIs to call JavaScript within WebView, or allows JavaScript to make calls to Java APIs. This allows developers to leverage the best of both worlds.Java EE developers can take advantage of WebView and the JavaScript-Java bridge to allow their HTML clients to seamlessly bypass Web browser’s sandbox to access native system resources, providing a richer user experience.FXMediaPlayerFXMediaPlayer is an application that lets developers check different media functionality in JavaFX, such as synthesizer or support for HTTP Live Streaming (HLS). This demo shows how developers can embed video content in their Java applications. JavaFX leverages the underlying video (e.g., H.264) and audio (e.g., AAC) codecs on the user’s computer. JavaFX APIs allow developers to interact with the video content (e.g. play/pause, or programmable markers). Some of the latest media features introduced in JavaFX 2.2 include HTTP Live Streaming (HLS). Obviously there is a lot for JavaFX enthusiasts to chew on!

Read the article

Review of Samsung Focus Windows Phone 7

- by mbcrump

I recently acquired a Samsung Focus Windows Phone 7 device from AT&T and wanted to share what I thought of it as an end-user. Before I get started, here are several of my write-ups for the Windows Phone 7. You may want to check out the second article titled: Hands-on WP7 Review of Prototype Hardware. From start to finish with the final version of Visual Studio Tools for Windows Phone 7 Hands-on : Windows Phone 7 Review on Prototype Hardware. Deploying your Windows Phone 7 Application to the actual hardware. Profile your Windows Phone 7 Application for Free Submitting a Windows Phone 7 Application to the Market. Samsung Focus i917 Phone Size: Perfect! I have been carrying around a Dell Streak (Android) and it is about half the size. It is really nice to have a phone that fits in your pocket without a lot of extra bulk. I bought a case for the Focus and it is still a perfect size. The phone just feels right. Screen: It has a beautiful Super AMOLED 480x800 screen. I only wish it supported a higher resolution. The colors are beautiful especially in an Xbox Live Game. 3G: I use AT&T and I've had spotty reception. This really can't be blamed on the phone as much as the actual carrier. Battery: I've had excellent battery life compared to my iPhone and Android devices. I usually use my phone throughout the day on and off and still have a charge at the end of the day. Camera/Video: I'm still looking for the option to send the video to YouTube or the Image to Twitter. The images look good, but the phone needs a forward facing camera. I like the iPhone/Android (Dell Streak) camera better. Built-in Speaker: Sounds great. It’s not a wimpy speaker that you cannot hear. CPU: Very smooth transitioning from one screen to another. The prototype Windows Phone 7 that I had, was no where near as smooth. (It was also running a slower processor though). OS: I actually like the OS but a few things could be better. CONS: Copy and Paste (Supposed to come in the next update) We need more apps (Pandora missing was a big one for me and Slacker’s advertisement sucks!). As time passes, and more developers get on board then this will be fixed. The browser needs some major work. I have tried to make cross-platform (WP7, Android, iPhone and iPad) web apps and the browser that ships with WP7 just can’t handle it. Apps need to be organized better. Instead of throw them all on one screen, it would help to allow the user to create categories. PROS: Hands down the best gaming experience on a phone. I have all three major phones (iphone, android and wp7). Nothing compares to the gaming experience on the WP7. The phone just works. I’ve had a LOT of glitches with my Android device. I’ve had maybe 2 with my WP7 device. Exchange and Office support are great. Nice integration with Twitter/Facebook and social media. Easy to navigate and find the information you need on one screen. Let’s look at a few pictures and we will wrap up with my final thoughts on the phone. WP7 Home Screen. Back of the phone is as stylish. It is hard to see due to the shadow but it is a very thin phone. What’s included? Manuals Ear buds Data Cable plus Power Adapter Phone Click a picture to enlarge So, what are my final thoughts on the Phone/OS? I love the Samsung Focus and would recommend it to anyone looking for a WP7 device. Like any first generation product, you need to give it a little while to mature. Right now the phone is missing several features that we are all used to using. That doesn’t mean a year from now it will be in the same situation. (I sure hope we won’t). If you are looking to get into mobile development, I believe WP7 is the easiest platform to develop from. This is especially true if you have a background in Silverlight or WPF. Subscribe to my feed

Read the article

Integrate BING API for Search inside ASP.Net web application

- by sreejukg

As you might already know, Bing is the Microsoft Search engine and is getting popular day by day. Bing offers APIs that can be integrated into your website to increase your website functionality. At this moment, there are two important APIs available. They are Bing Search API Bing Maps The Search API enables you to build applications that utilize Bing’s technology. The API allows you to search multiple source types such as web; images, video etc. and supports various output prototypes such as JSON, XML, and SOAP. Also you will be able to customize the search results as you wish for your public facing website. Bing Maps API allows you to build robust applications that use Bing Maps. In this article I am going to describe, how you can integrate Bing search into your website. In order to start using Bing, First you need to sign in to http://www.bing.com/toolbox/bingdeveloper/ using your windows live credentials. Click on the Sign in button, you will be asked to enter your windows live credentials. Once signed in you will be redirected to the Developer page. Here you can create applications and get AppID for each application. Since I am a first time user, I don’t have any applications added. Click on the Add button to add a new application. You will be asked to enter certain details about your application. The fields are straight forward, only thing you need to note is the website field, here you need to enter the website address from where you are going to use this application, and this field is optional too. Of course you need to agree on the terms and conditions and then click Save. Once you click on save, the application will be created and application ID will be available for your use. Now we got the APP Id. Basically Bing supports three protocols. They are JSON, XML and SOAP. JSON is useful if you want to call the search requests directly from the browser and use JavaScript to parse the results, thus JSON is the favorite choice for AJAX application. XML is the alternative for applications that does not support SOAP, e.g. flash/ Silverlight etc. SOAP is ideal for strongly typed languages and gives a request/response object model. In this article I am going to demonstrate how to search BING API using SOAP protocol from an ASP.Net application. For the purpose of this demonstration, I am going to create an ASP.Net project and implement the search functionality in an aspx page. Open Visual Studio, navigate to File-> New Project, select ASP.Net empty web application, I named the project as “BingSearchSample”. Add a Search.aspx page to the project, once added the solution explorer will looks similar to the following. Now you need to add a web reference to the SOAP service available from Bing. To do this, from the solution explorer, right click your project, select Add Service Reference. Now the new service reference dialog will appear. In the left bottom of the dialog, you can find advanced button, click on it. Now the service reference settings dialog will appear. In the bottom left, you can find Add Web Reference button, click on it. The add web reference dialog will appear now. Enter the URL as http://api.bing.net/search.wsdl?AppID=<YourAppIDHere>&version=2.2 (replace <yourAppIDHere> with the appID you have generated previously) and click on the button next to it. This will find the web service methods available. You can change the namespace suggested by Bing, but for the purpose of this demonstration I have accepted all the default settings. Click on the Add reference button once you are done. Now the web reference to Search service will be added your project. You can find this under solution explorer of your project. Now in the Search.aspx, that you previously created, place one textbox, button and a grid view. For the purpose of this demonstration, I have given the identifiers (ID) as txtSearch, btnSearch, gvSearch respectively. The idea is to search the text entered in the text box using Bing service and show the results in the grid view. In the design view, the search.aspx looks as follows. In the search.aspx.cs page, add a using statement that points to net.bing.api. I have added the following code for button click event handler. The code is very straight forward. It just calls the service with your AppID, a query to search and a source for searching. Let us run this page and see the output when I enter Microsoft in my textbox. If you want to search a specific site, you can include the site name in the query parameter. For e.g. the following query will search the word Microsoft from www.microsoft.com website. searchRequest.Query = “site:www.microsoft.com Microsoft”; The output of this query is as follows. Integrating BING search API to your website is easy and there is no limit on the customization of the interface you can do. There is no Bing branding required so I believe this is a great option for web developers when they plan for site search.

Read the article

Building a Distributed Commerce Infrastructure in the Cloud using Azure and Commerce Server

- by Lewis Benge

One of the biggest questions I routinely get asked is how scalable Commerce Server is. Of course the text book answer is the product has been around for 10 years, powers some of the largest e-Commerce websites in the world, so it scales horizontally extremely well. One argument however though is what if you can't predict the growth of demand required of your Commerce Platform, or need the ability to scale up during busy seasons such as Christmas for a retail environment but are hesitant on maintaining the infrastructure on a year-round basis? The obvious answer is to utilise the many elasticated cloud infrastructure providers that are establishing themselves in the ever-growing market, the problem however is Commerce Server is still product which has a legacy tightly coupled dependency on Windows and IIS components. Commerce Server 2009 codename "R2" however introduced to the concept of an n-tier deployment of Microsoft Commerce Server, meaning you are no longer tied to core objects API but instead have serializable Commerce Entity objects, and business logic allowing for Commerce Server to now be built into a WCF-based SOA architecture. Presentation layers no-longer now need to remain on the same physical machine as the application server, meaning you can now build the user experience into multiple-technologies and host them in multiple places – leveraging the transport benefits that a WCF service may bring, such as message queuing, security, and multiple end-points. All of this logic will still need to remain in your internal infrastructure, for two reasons. Firstly cloud based computing infrastructure does not support PCI security requirements, and secondly even though many of the legacy Commerce Server dependencies have been abstracted away within this version of the application, it is still not a fully supported to be deployed exclusively into the cloud. If you do wish to benefit from the scalability of the cloud however, you can still achieve a great Commerce Server and Azure setup by utilising both the Azure App Fabric in terms of the service bus, and authentication services and Windows Azure to host any online presence you may require. The architecture would be something similar to this: This setup would allow you to construct your Commerce Services as part of your on-site infrastructure. These services would contain all of the channels custom business logic, and provide the overall interface back into the underlying Commerce Server components. It would be recommended that services are constructed around the specific business domain of the application, which based on your business model would usually consist of separate services around Catalogue, Orders, Search, Profiles, and Marketing. The App Fabric service bus is then used to abstract and aggregate further the services, making them available to the cloud and subsequently secured by App Fabrics authentication services. These services are now available for consumption by any client, using any supported technology – not just .NET. Thus meaning you are now able to construct apps for IPhone, integrate with Java based POS Devices, and any many other potential uses. This aggregation is useful, and forms the basis of the further strategy around diversifying and enhancing the e-Commerce experience, but also provides the foundation for the scalability we want to gain from utilising a cloud-based application platform. The Windows Azure application platform is Microsoft solution to benefiting from the true economies of scale in terms of the elasticity of the cloud. Just before the launch of the Azure Platform – Domino's pizza actually managed to run their whole SuperBowl operation from the scalability of Windows Azure, and simply switching back to their traditional operation the next day with no residual infrastructure costs. The platform also natively can subscribe to services and messages exposed within the AppFabric service bus, making it an ideal solution to build and deploy a presentation layer which will need to support of scalable infrastructure – such as a high demand public facing e-Commerce portal, or a promotion element of a brand. Windows Azure has excellent support for ASP.NET, including its own caching providers meaning expensive operations such as catalogue queries can persist in memory on the application server, reducing the demand on internal infrastructure and prioritising it for more business critical operations such as receiving orders and processing payments. Windows Azure also supports other languages too, meaning utilising this approach you can technically build a Commerce Server presentation layer in Java, PHP, or Ruby – or equally in ASP.NET or Silverlight without having to change any of the underlying business or Commerce Server implementation. This SOA-style architecture is one of the primary differentiators for Commerce Server as a product in the e-Commerce market, and now with the introduction of a WCF capability in Commerce Server 2009/2009 R2 the opportunities for extensibility of the both the user experience, and integration into third parties, are drastically increased, all with no effect to the underlying channel logic. So if you are looking at deployment options for your e-Commerce application to help support demand in a cost effective way. I would highly recommend you consider looking at Windows Azure, and if you have any questions in-particular about this style of deployment, please feel free to get in touch!

Read the article

Trying to keep up with Technology and Blogging

- by Dave Campbell

A little bit of everything... The heading above got changed a bunch during writing and I finally settled on that because this has become a 'stream of consciousness' post... or maybe a stream of UNconsciousness :) If you've noticed, my blogging has been a tad slow this fall. There's been a lot going on personally. But then again, I haven't skipped anybody either. Rather than go through ALL the blogs I have aggregated, and take a week to get to the bottom, at some point in the last year, I had moved the lists around so I now have "SilverlightMVPs", "Very Prolific", "WP7", and "Top Checks". This is a total of about 250 of the more prolific bloggers. Those 250 bloggers have kept me very busy up through about //BUILD. Sometimes it would take all week to go through just that list putting out 13 posts per blog per day... but not anymore. This weekend I made it all the way through the BIG list... close to 700 blogs, and if you read my blog, you know I had one medium day (Saturday), and yesterday was very short. Why is this? To be honest, I don't know... is everybody busy re-tooling, or churning waiting for direction? I have a short list of WinRT/Metro/W8 folks... maybe I need to be pointed to more of them... but my old favorites are not pumping out posts as they have in the past. I said before that I am attracted to Metro, and I've already got My first Metro app post out there, and were it not for working with the new site, I'd have had another out last weekend... so definitely look for more from me in that area. New Site? Did I say 'new site' ? oops... didn't mean to do that, but now that the cat is out of the bag, I may as well continue... While at //BUILD, I discussed a re-tooling of SilverlightCream with lots of folks... probably more than wanted to hear about it to be honest! ... it's needed a facelift, and there's stuff on there that never worked right, plus there's a lot of manual effort that goes into a blog post. In an effort to alleviate all the above, Michael Washington and I have been working on the next iteration of SilverlightCream. Not wanting to lose that branding or mess with any saved links, I decided to change from a somewhat funky name to something more professional. I also decided to put my blog on the site, and tie my main announcement twitter feed to the site as well. The way things sit today, there are 3 different names in those locations and it's gotta be confusing for folks just stumbling in. We're going to do a series of posts talking about the site and the new backend processing (hint: Michael Washington is responsible for it, so you can take a guess at the technology), but for now, we'd like some eyes on the front end of the site, and some submittals using it to see if it falls over somewhere that we haven't tried. So... I'm going to give it up... the new site is Windows Dev News. The Twitter feed is @WindowsDevNews, and the blog will be on the site as well at Windows Dev News Blog. I've got the RSS Feed on Feedburner too, so I think all the nuts and bolts are good to go. The submittal and search pages work, as does the blog page. You'll notice we used the MasterPage from SilverlightCream to get started. That will probably change, but it's just the visual... the content is the important part. Other missing things are the tracking and 'Skim' page that we will eventually have up and running. There are some formatting issues with the blog posts but if you hang in there with me, those will be taken care of. If you're a blogger, please submit through the site and let me know if you find any problems. If you're a reader, please add this feed and site. I'll be duplicating the effort for a while but at some point will stop that foolishness. We won't lose the data from SilverlightCream though, so keep using that as a search resource... I have hopes to pull that database over to WindowsDevNews, or link to it in some manner... that part isn't set in jello yet, but it will not be lost. So there it is... let me know what you think, send me your WinRT/Metro/W8 postings along with your Silverlight and WP7 posts... it's not that different, it's just more. Stay in the 'Light

Read the article

SQL Saturday #44 Huntington Beach Recap

What a great day. It was long and tiring, but rewarding in so many ways. On Sunday morning, I was driving home and I decided to take the Pacific Coast Highway from Huntington Beach. It was a great chance to exhale and just enjoy the sun and smells of the beach (I really love SoCal sometimes). And for future reference for all you speakers, the beach and ocean are only 5 minutes from the SQL Saturday location. I just could help noticing also the shocking number of high priced cars on the road (4 Bentleys, 3 Ferraris, 1 Aston Martins, 3 Maserati, 1 Rolls Royce, and 2 Lamborghinis). It made me think about this: Price of all those cars: $ 150,000+. Impacting the ability of people to learn: Priceless. We have positively impacted the education, knowledge, capabilities of not only our attendees, but also all of their companies and people they might help as well. That is just staggering and something to be immensely proud of. To all of my fellow community leaders, I salute you. So lets talk about the event Overall We had over 220 people register for the event and had 180+ people attend the event. I was shooting for the magical 200 number, but I guess it just gives us more motivation to make it even bigger and better next time. We had a few snags along the way, but what event doesnt, but I think everything turned out great. I did not hear any negative comments and heard lots of positive comments along with people asking when the next one is going to be (More on that later). Location- Golden West College We could not have asked for a better partner for the event. Herb Cohen from Golden West College was the wizard behind the curtains. From the beginning, he was our advocate to the GWC Board and was instrumental in getting our event approved. The day off, Herb was a HUGE help getting any and all logistics that we needed taken care of. In the craziness of the early morning registration crush it was a big help knowing that he and Bret Stateham (Blog | Twitter) were taking care of testing projectors in all the rooms. Anything we needed he was there and was even proactive in getting some things that I had not even thought of (i.e. a dumpster for all of our garbage). I cannot thank Herb enough along with other members of the GWC staff including Minnie Higgins of the Career and Technical Education Division office, Jack Taylor, public safety, and Ron Pryor, Tech Services Support. And last, but not least, the Wireless on campus was absolutely FANTASTIC! Some lessons learned Unless you are a glutton for punishment, as I no doubt am, you most certainly want to give yourself more than six weeks to plan the event. I am lucky that I have a very understanding wife and had a wonderful set of co-coordinators helping me out. A big thanks goes out to Phil, Marlon (Blog | Twitter), Nitin (Twitter), Thomas (Blog | Twitter), Bret (Blog | Twitter), Ben, and Laurie. Thankfully, the sponsor and speaker community was hugely supportive and we were able to fill out the entire event with speakers and sponsors. I have to say that there is not a lot that I would change after this years event. There are obviously going to be some things that we can do better or differently next time, but overall I think it was a great event and I was more than happy with the response we received from the community. Sponsors We obviously could not have put together our event without our sponsors. So certainly have to show them some love. Platinum Sponsors Quest Software http://www.quest.com My Space http://www.myspace.com/ Gold Strategy Companion http://www.strategycompanion.com Silver Fusion-IO http://www.fusionio.com Bronze WestClinTech http://westclintech.com Professional Association For SQL Server http://www.sqlpass.org Attunity http://www.attunity.com Sharepoint 360 http://www.sharepoint360.com Some additional Thanks Andy Warren (Blog | Twitter) Always there to answer my question and help out when I had some issues or questions with the website. The amount of work that he and everyone else put into SQL Saturday is very amazing. What a great gift to the community! Einstein Bros. Bagels They were our Breakfast Vendor and arrived perfectly on time with yummy bagels, sweets and most importantly coffee. Luccis Deli (http://www.luccisdeli.com) Luccis was out Lunch Vendor. They were great to work with and the food was excellent. They worked with us to give us a great price. Heard lots of great comments about the lunches. Definitely not your ordinary box lunch. Moving Forward Unfortunately, the work does not end after the event. We have a few things to clear up such as surveys, sponsor stuff, presentations uploaded to the website, expense reimbursement, stuff like that. Hopefully, all that should be cleared up within the next couple weeks. After that as a group we are going to get together and decide what our next steps are. We definitely want to keep some of the momentum that we are building as a SQL Community and channel that into future SQL Saturdays and other types of community events. In the meantime, for additional training be sure to check out your local User Group and PASS. San Diego SQL Server Users Group ( http://www.sdsqlug.org/home/index.cfm ) Orange County SQL Server Users Group ( http://www.sqloc.com/ ) L.A. SQL Server Users Group ( http://www.sql.la/ ) SQL PASS ( http://www.sqlpass.org/ ) 24 Hours of PASS ( http://www.sqlpass.org/24hours/2010/ ) So stay tuned, there will be more events to come in SoCal!!Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

Read the article

My History with Agile

- by Robert May

I’m going to write my history with Agile here. That way, in future posts, I can refer back to it, instead of typing it out in the post that contains information you may actually want to read. Note that I’m actually a pretty senior developer, and do lots of technical interviews. I’m an Agile fan because of the difference it makes in peoples lives and the improvement in quality it brings, and I’ll sacrifice my technological advance to help teams. Management History I started management pretty early in my career, starting with the first job that I ever had. I actually do NOT have a CS or similar degree. I have a Bachelor’s of Business Administration with an emphasis in Computer Information Systems. My first management gigs were around call center work and were very schedule oriented. I didn’t understand the true value of teams, and I’m ashamed to admit, I actually installed a fingerprint scanner as a time clock in this job. I shudder to think of the impact that I had on the team spirit. I didn’t even trust them enough to fill out their time cards correctly. How sad. I was managing nearly 100 people in this position, with the help of a great set of subordinates. I did try to come up with reward programs for the team, but again, didn’t understand the concept of team, so instead of letting the team determine how the rewards should work, I mandated from on high, which isn’t a good thing. I was told that I wasn’t the type that would be a good manager by people whom I respected a lot. They said it because I was a computer geek, since they don’t understand good management either, but in retrospect, they were right about me then. I was too green. After my first job, I went on to other jobs and with the exception of one job, I’ve managed people at them all. The rest of the management story is important for understanding agile, so I’ll save it for my next post. Technical History I’ve been in software development for many, many years. I technically started programming on a commodore 64 in basic. I didn’t know that I was programming, but I was sure having fun. That was followed by batch files, Gorilla hacking (I always had to win), WordPerfect Macro programming and other things that taught me the basics. My first “real” job was with a telephone company, and that’s where I made my first database application in DataEase, wrote my first VBA app and started using real programming tools, like turbo pascal, vb3-vb5, and semi-real tools like RPG and VisualRPG. I wrote my first web page in 1994, and built my first data driven web page in 1995 using perlDB. You really can do anything with Perl. At this time, I also started a Linux based internet service provider that is still in operation today. One of the people I worked with is now a Microsoft employee building and designing frameworks you probably know well. Smart guy. I also built my first ASP applications connecting to Sql Server 6.5, setup Exchange 5.5 for the company, and many other system administration stuff. I’m a programmer by choice, mostly because I don’t really like PC support. From there, I went on to a large state agency. I got to see and maintain true waterfall projects. 5 years of maintaining the 200 VB COM+ (MTS, actually) dlls that were used to calculate a single number is a long time. That was all Microsoft DNS technologies. SQL Server and VB6 were the tools of choice, although .net started to be a factor near the end of employment. I did some heavy XML work at this job and even wrote an XSD parser and validator in VB6 that was a shim until MSXML 3.0 came out. Prior to 3.0, XSD’s weren’t supported, and I didn’t want to write DTDs. Ironically, jobs after this were more generic. I pretty much settled in on the .net framework and revisions of it. Lots of WPF, some silverlight, lots of ASP.NET, some SQL Azure, lots of SQL Server, some Oracle, but I don’t think that I was as passionate about development and technologies. I was more into the management of development. I like people. Technorati Tags: Agile,history

Read the article

Visualising data a different way with Pivot collections

- by Rob Farley

Roger’s been doing a great job extending PivotViewer recently, and you can find the list of LobsterPot pivots at http://pivot.lobsterpot.com.au Many months back, the TED Talk that Gary Flake did about Pivot caught my imagination, and I did some research into it. At the time, most of what we did with Pivot was geared towards what we could do for clients, including making Pivot collections based on students at a school, and using it to browse PDF invoices by their various properties. We had actual commercial work based on Pivot collections back then, and it was all kinds of fun. Later, we made some collections for events that were happening, and even got featured in the TechEd Australia keynote. But I’m getting ahead of myself... let me explain the concept. A Pivot collection is an XML file (with .cxml extension) which lists Items, each linking to an image that’s stored in a Deep Zoom format (this means that it contains tiles like Bing Maps, so that the browser can request only the ones of interest according to the zoom level). This collection can be shown in a Silverlight application that uses the PivotViewer control, or in the Pivot Browser that’s available from getpivot.com. Filtering and sorting the items according to their facets (attributes, such as size, age, category, etc), the PivotViewer rearranges the way that these are shown in a very dynamic way. To quote Gary Flake, this lets us “see patterns which are otherwise hidden”. This browsing mechanism is very suited to a number of different methods, because it’s just that – browsing. It’s not searching, it’s more akin to window-shopping than doing an internet search. When we decided to put something together for the conferences such as TechEd Australia 2010 and the PASS Summit 2010, we did some screen-scraping to provide a different view of data that was already available online. Nick Hodge and Michael Kordahi from Microsoft liked the idea a lot, and after a bit of tweaking, we produced one that Michael used in the TechEd Australia keynote to show the variety of talks on offer. It’s interesting to see a pattern in this data: The Office track has the most sessions, but if the Interactive Sessions and Instructor-Led Labs are removed, it drops down to only the sixth most popular track, with Cloud Computing taking over. This is something which just isn’t obvious when you look an ordinary search tool. You get a much better feel for the data when moving around it like this. The more observant amongst you will have noticed some difference in the collection that Michael is demonstrating in the picture above with the screenshots I’ve shown. That’s because it’s been extended some more. At the SQLBits conference in the UK this year, I had some interesting discussions with the guys from Xpert360, particularly Phil Carter, who I’d met in 2009 at an earlier SQLBits conference. They had got around to producing a Pivot collection based on the SQLBits data, which we had been planning to do but ran out of time. We discussed some of ways that Pivot could be used, including the ways that my old friend Howard Dierking had extended it for the MSDN Magazine. I’m not suggesting I influenced Xpert360 at all, but they certainly inspired us with some of their posts on the matter So with LobsterPot guys David Gardiner and Roger Noble both having dabbled in Pivot collections (and Dave doing some for clients), I set Roger to work on extending it some more. He’s used various events and so on to be able to make an environment that allows us to do quick deployment of new collections, as well as showing the data in a grid view which behaves as if it were simply a third view of the data (the other two being the array of images and the ‘histogram’ view). I see PivotViewer as being a significant step in data visualisation – so much so that I feature it when I deliver talks on Spatial Data Visualisation methods. Any time when there is information that can be conveyed through an image, you have to ask yourself how best to show that image, and whether that image is the focal point. For Spatial data, the image is most often a map, and the map becomes the central mode for navigation. I show Pivot with postcode areas, since I can browse the postcodes based on their data, and many of the images are recognisable (to locals of South Australia). Naturally, the images could link through to the map itself, and so on, but generally people think of Spatial data in terms of navigating a map, which doesn’t always gel with the information you’re trying to extract. Roger’s even looking into ways to hook PivotViewer into the Bing Maps API, in a similar way to the Deep Earth project, displaying different levels of map detail according to how ‘zoomed in’ the images are. Some of the work that Dave did with one of the schools was generating the Deep Zoom tiles “on the fly”, based on images stored in a database, and Roger has produced a collection which uses images from flickr, that lets you move from one search term to another. Pulling the images down from flickr.com isn’t particularly ideal from a performance aspect, and flickr doesn’t store images in a small-enough format to really lend itself to this use, but you might agree that it’s an interesting concept which compares nicely to using Maps. I’m looking forward to future versions of the PivotViewer control, and hope they provide many more events that can be used, and even more hooks into it. Naturally, LobsterPot could help provide your business with a PivotViewer experience, but you can probably do a lot of it yourself too. There’s a thorough guide at getpivot.com, which is how we got into it. For some examples of what we’ve done, have a look at http://pivot.lobsterpot.com.au. I’d like to see PivotViewer really catch on a data visualisation tool.

Search Results

Search found 9193 results on 368 pages for 'silverlight embedded'.

Page 353/368 | < Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360 | Next Page >

- by JohnCC

- by user125197

- by lee

- by Cj.

- by George Clingerman

- by pinaldave

- by Paulo Morgado

- by DigiMortal

- by Trevor Bekolay

- by Brenna Johnson-Oracle

- by constant

- by zowens

- by Eric Nelson

- by pinaldave

- by Janice J. Heiss

- by mbcrump

- by sreejukg

- by Lewis Benge

- by Dave Campbell

- by Robert May

- by Rob Farley

< Previous Page | 349 350 351 352 353 354 355 356 357 358 359 360 | Next Page >