Search Results

Search found 29412 results on 1177 pages for 'microsoft office online'.

Page 362/1177 | < Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >

  • pfsense multi-site VPN VOIP deployment

    - by sysconfig
    have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

    Read the article

  • How to determine if a ResourceDictionary is loaded correctly

    - by akaphenom
    How can I tell (through the debugger if my app resources are being loaded correctly). I have tried (in f#) type MyApp() as this = inherit Application() do Application.LoadComponent(this, new System.Uri("/FSSilverlightApp;component/App.xaml", System.UriKind.Relative)) let cc = new ContentControl() let mainGrid : Grid = loadXaml("MainWindow.xaml") let siteTemplate : Grid = mainGrid let txt : TextBlock = siteTemplate ? txt do this.Startup.Add(this.startup) let mutable s = "Items: " s <- s + this.Resources.Count.ToString() it is returning a count of zero. Though I am pretty sure the application is loading the resource because if I change the path within the App.xaml - I get exceptions at runtime. Other re,lavent snippets are: I have the following app.xaml <Application xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" x:Class="Module1.MyApp"> <Application.Resources> <ResourceDictionary> <ResourceDictionary.MergedDictionaries> <ResourceDictionary Source="/FSSilverlightApp;component/TransitioningFrame.xaml" /> </ResourceDictionary.MergedDictionaries> </ResourceDictionary> </Application.Resources> </Application> and content template: < ResourceDictionary xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"> <ControlTemplate x:Key="TransitioningFrame" TargetType="navigation:Frame"> <Border Background="{TemplateBinding Background}" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" VerticalAlignment="{TemplateBinding VerticalContentAlignment}"> <ContentPresenter Cursor="{TemplateBinding Cursor}" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" Margin="{TemplateBinding Padding}" VerticalAlignment="{TemplateBinding VerticalContentAlignment}" Content="{TemplateBinding Content}"/> </Border> </ControlTemplate> </ResourceDictionary>

    Read the article

  • PCs using certain IP addresses cannot ping out

    - by Steve McCall
    I'm having a very strange problem which I just can't get past. The way our network is set up, we have 2 locations. The main office with all our PCs, and servers/ We are then joined to a local ISP via microwave link and they provide our internet gateway and house an additional storage server for us. All of the network infrastructure is within our office The problem is... When some PCs (and servers) are assigned IP addresses, they cannot ping the gateway or remote server however the remote server can ping the PC. Most of our internal IP addresses work fine but specific ones (e.g. .29) has this problem all the time. There is nothing else using the ip address and no other network problems. When we switch the IP on the PC, it works fine. Please help, I'm going mad. Thanks, Steve

    Read the article

  • OpenVPN Cloud for Network monitoring

    - by mezgani
    I'm working on a supervision project based on OpenVPN, a good way to send some network traffic through a secure channel to office from there out to the Internet. On office i have an OpenVPN server installed and i need to monitor all branches servers that are behind firewalls. I know that the point to point solution is very easy so we may only install OpenVPN client on node that i need to monitor. In the fact, is there any other issue that could help to supervise all branches DMZ network, without installing the client on each machines.

    Read the article

  • How to fix wrong icons of the files in Windows XP SP3

    - by Angel_Kitsa
    Hi everybody, Recently I deleted some folders from *C:\Windows* directory with file names like this: $some_name_Uninstall$, which are the files of the patches, which were installed on the OS. It seems like my office placed the icons in some of those folders and now all xls and doc files have no icon. (I mean no Office icon) I couldn't find a solution for this till now. Please advice if someone had such problem and/or knows the solution. p.s. I have 7 years experience with Windows XP, so please don't ask me to do simple things like associate with files again or something like that. I tried a lot of things. Uninstall and install is not a way out. Thanks for any information!

    Read the article

  • powerpoint make computer shut down on dell optiplex 760

    - by yael
    At my office we upgraded group of computers to windows 7 + office 2010, few of us have problem that when we work on powerpoint - once in a while the computer suddenly shut down (with out any message). Some of us - has no such problems. We checked and fount that the people who experience problems - use Dell Optiplex 760 PC, and everyone that have no problems use other models. We also found out that the processors of the 760's are not the same - some are Intel E7400 and one is Intel E8400, so I suspect that maybe the mother board is the problem Does any one no this problem? Does any one have an idea about it? Any help will be appreciated. Thanks, Yael

    Read the article

  • Is ASP.NET MVC destined to replace Webforms?

    - by johnny
    I found these questions, but a couple of them were a little old: http://stackoverflow.com/questions/191556/should-i-pursue-asp-net-webforms-or-asp-net-mvc http://stackoverflow.com/questions/88787/do-you-think-asp-net-mvc-will-compete-with-asp-net-webforms http://stackoverflow.com/questions/722637/asp-net-mvc-asp-net-webforms-why I do not believe these are duplicates and might be old enough that new light can be shed. If not please close this. I know that no one framework or language is necessarily the only tool for every job. But, do you see MVC eclipsing webforms or webforms going lower on the priority list for Microsoft? They will have to keep webforms for a long time because so many have invested in it, but they don't have to keep adding new functionality for it. I don't know if this is a good example, but it reminds me of web parts. I never saw much improvement in it from Microsoft. It works and I thought it was great until I started to really try and get a lot out of it. Then from what I could see it just wasn't being pursued by Microsoft that much, though it stayed in Visual Studio. Maybe that's a bad example; just what I remembered. EDIT: Also, if anyone has any statements from Microsoft on this subject it is appreciated. No offense to anyone. I was only hoping for something official.

    Read the article

  • Using If Else in HTML page inside <%# %>tags

    - by Amit Ranjan
    I have to set image on the basis of fields value coming from db. I want it to achieve via. tags <%# %. For example i have collection binded with grid. It has a Field called Online which is boolean. So if the value of Online is true then the green.png will be set as path of asp:image control else grey.png will be the path of the asp: image control.

    Read the article

  • Trigger for ComboBox in Silverlight

    - by Budda
    Is there any possibility to display selected item of the ComboBox (after popup closing) in a way that is different from its displaying in DropDown List (There are players number and name in the dropdown list, but after list closing I want to see only its number). How can I change a background for the player with some Flag? As far as I know, all of that can be done with triggers, but are they supported in Silverlight 4, VS2010, Silverlight Toolkit 4? In my case the following code <ComboBox ItemsSource="{Binding PlayersAll}" SelectedItem="{Binding Path=SelectedPlayer, Mode=TwoWay}" > <ComboBox.ItemTemplate> <DataTemplate> <ToolkitControls:WrapPanel Orientation="Horizontal"> <TextBlock Text="{Binding TeamNumber}"/> <TextBlock Text=" - "/> <TextBlock Text="{Binding ShortName}"/> </ToolkitControls:WrapPanel> <DataTemplate.Triggers> <Trigger Property="HasError" Value="True"> <Setter Property="Background" TargetName="FlagSet" Value="Red"/> </Trigger> </DataTemplate.Triggers> </DataTemplate> </ComboBox.ItemTemplate> </ComboBox> gives an error: The property 'Triggers' does not exist on the type 'DataTemplate' in the XML namespace 'http://schemas.microsoft.com/winfx/2006/xaml/presentation' what is wrong here? Here are my namespaces: xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:navigation="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Navigation" xmlns:data="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Data" xmlns:ToolkitControls="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Toolkit"

    Read the article

  • VPN Network intermittantly fails to provide internet: What could be possible causes

    - by Jake M
    We have a small office with our own VPN setup. We occasionally experience failures in our internet connection where we cannot access the internet. Most of the time the internet connection will resume by itself(without me doing anything) after a period of time(10 mins). Would you be able to suggest possible causes of the connection failure so I can then go and run some tests? Our network architecture is like so: A 'Billion' brand router that is connected to the internet via phone cable and then connected to our Cisco Switch A Cisco Switch/Bus which is connected to all our office nodes, our external harddrive and also to our router as stated above. All connections are via ethernet cable A series of work computers(nodes) connected via ethernet cable to the Cisco switch. Our ISP is TPG Australia We have a Virtual Private Network All the ethernet cables are about 3 years old Do you think that the causes of our intermittant connection problems could be due to the following: Data collisions in the ethernet cables Old/Faulty ethernet cables Our ISP has bad service Can you think of any other causes of the problem?

    Read the article

  • Freely available dictionary data for Chinese, Japanese, CJK characters

    - by devio
    I am developing an online CJK character dictionary application, and already found the following databases: Unicode Unihan Database Jim Breen's JMDict and KanjiDic CEDict HanDeDict As I am looking for more data, web searches often lead me to online dictionaries, but not the data itself, using the same sources over again. If you know of any CJK-relevant downloadable dictionaries, please add them.

    Read the article

  • How can I speed up my Windows Server 2008 VPN Connection?

    - by Pure.Krome
    So I've installed VPN service that comes with Windows Server 2008. Works perfectly, etc. When a client remote desktops to one of the private servers at the office, via VPN .. it's pretty slow. Now - how long is a piece of string? So before I get all the obligatory checks, I'll list the things from Mr. Obvious: Our modem/router (fritz!box) has a data/graph that shows incoming and outbound bandwidth. Both directions are barely getting used when a client has RDP'd via VPN. Our office internet connection is running at 21,9 Mbit/s download 1,3 Mbit/s upload. I feel like it's maxing at .. modem speeds ?? Is there any tricks I can do to confirm this and possibly even fix this?

    Read the article

  • How should one manager external and internal DNS servers at the same time?

    - by erotsppa
    We run a mac network here in the office. We have an internal DNS server to manage the network. Everything is resolved to a local ip (for mail.mydomain.com etc). However, we also have an external DNS server for when our users are not in the office. However, isn't it a pain to have to manage two lists? Whenever you change something you have to change another? And you can't have one be a slave of another because the ip are sometimes different (for example mail.mydomain.com would point to a local ip in local dns server but an external ip in the external dns server). Any tricks?

    Read the article

  • How should I remotely manage Dell Poweredge 2850 running Ubuntu server?

    - by Saul
    First I've got to say I'm a Linux / Ubuntu novice, so go gentle on me as I'm on day 3. I've managed to get Ubuntu server Ubuntu 8.04 LTS installed and running on the Poweredge 1850 I bought off ebay. The box will go in a rack at my office but I want to be able to work on it and power on and off from home and I gather that (maybe) IPMI over LAN might be the way to do this, or maybe its something to do with BMC or something? I want to be able to administer/manage from a client PC at home running XP. I will be configuring the office router to port forward port 80 and 443 to the Ubuntu server running Apache2, and I'm puzzled about how the remote management works (unless it comes on a different port forwarded to a different internal IP) Thanks for any help

    Read the article

  • Enterprise Tape Backup solutions

    - by Tom O'Connor
    I'm currently attempting to re-architect a backup solution where I'm working. We've got 2 NAS devices, one in the office, one in the datacentre. The servers in the DC back up to the DC NAS, which is then replicated to the Office NAS. The office NAS exports shares as CIFS and NFS, this bit is fine. At some point, I'll have to expand our storage capacity, currently we've got about 1.4TB of storage space, which is about 96% full. Previously, the tape backup was a script that ran tar a few times and squirted data onto a tape. It worked, but was by no means a perfect solution. Restores are a bit of a pest, adding new data to the backup requires editing the script as root. It's just all a bit non-ideal. I've been evaluating a number of "enterprise" ready backup solutions, such as Yosemite Backup from Barracuda, Acronis Backup/Restore, and something from Arkeia. In the process of evaluating these, I've found 2 big problems. Not all of them allow backup of mounted devices (such as a NFS mounted NAS) Many of these applications don't like our tape device. For the most part, (1) is essential. Our NAS has a feeble processor and can't run applications like backup agents. I suspect that the biggest problem is the tape device, which is a HP C7438A DAT72 connected via USB. Questions: Has anyone else got an USB DAT72 device working with similar software? Is there a better way to back up data from an "appliance" NAS device on which you can't run an agent? Would I be totally out of my mind to specify a cheap HP or Dell server with a couple of 1TB hard disks, and a SAS card to then talk to an HP Ultrium (or similar) device? The biggest drawback to this would be cost (400ish for the server, 200 for the SAS connectivity and 1700 for a LTO4 device) Notes: I'd love to be able to say that I'd get rid of tapes entirely, and use some form of hard disk backup. In a previous job, we had LaCie USB drives, which were decidedly unreliable.

    Read the article

  • Different location of assemblies stoped the type casting.

    - by smwikipedia
    I am writing a custom Control class in C# for my main project. There're 2 projects, one for my Control and one for my main project. These 2 projects are in the same solution. I add a reference from my main project to my Control project. I notice that the first time after I drag my Control from the Tool Panel onto my main winform, an assembly folder was generated at the C:\Users\XXX\AppData\Local\Microsoft\VisualStudio\9.0\ProjectAssemblies, and the folder name is something like "jlebh-py01". The first build is always OK, but after I rebuild my Control class or whole solution, a new assembly folder will be generated at C:\Users\XXX\AppData\Local\Microsoft\VisualStudio\9.0\ProjectAssemblies, and then problem arises, my Control fails to behave well because Visual Studio says that the two types "originates from different location". The error message is as below: [A]MyControl.TypeXXX cannot be cast to [B]MyControl.TypeXXX. Type A orginates from assemblyXXX at location 'C:\Users\XXX\AppData\Local\Microsoft\VisualStudio\9.0\ProjectAssemblies\jlebh-py01\MyControl.dll' Type B originats from assemblyXXX at location 'C:\Users\XXX\AppData\Local\Microsoft\VisualStudio\9.0\ProjectAssemblies\ue4i-z3j01\MyControl.dll' If I reference the Control DLL directly instead of through project reference, or never rebuild the Control project after use my Control in the main project, things seem to be OK. Does anyone knows why? Is it the proper way to develop a control and a main project within the same solution? Many thanks...

    Read the article

  • Vista: "connect to a network" does not load (can't set up VPN)

    - by Arkaaito
    I'm trying to connect to my office VPN from home. One small problem: my home desktop uses Vista (64-bit, Ultimate edition). On Vista, you're supposed to set up a VPN like so: Open the control panel Click on Network Click on "Connect to a Network" Configure a new connection of type "Office" The problem is, when I click on the link for "Connect to a Network", nothing happens. Can anyone suggest how I should go about troubleshooting this? (Or am I better off just upgrading to Windows 7?)

    Read the article

  • How to Sort ip addresses and merge two files in efficent manner using perl or *nix commands?

    - by berkay
    (*) This problem should be done in perl or any *nix commands. i'm working on a program and efficiency matters.The file1 consists ip addresses and some other data: index ipsrc portsrc ip dest port src 8 128.3.45.10 2122 169.182.111.161 80 (same ip src and dst) 9 128.3.45.10 2123 169.182.111.161 22 (same ip src and dst) 10 128.3.45.10 2124 169.182.111.161 80 (same ip src and dst) 19 128.3.45.128 62256 207.245.43.126 80 and other file2 looks like (file1 and file2 are in different order) 128.3.45.10 ioc-sea-lm 169.182.111.161 microsoft-ds 0 0 3 186 3 186 128.3.45.10 hypercube-lm 169.182.111.161 https 0 0 3 186 3 186 128.3.44.112 pay-per-view 148.184.171.6 netbios-ssn 0 0 3 186 3 186 128.3.45.12 cadabra-lm 148.184.171.6 microsoft-ds 0 0 3 186 3 186 1- SORT file1 using IP address in second column and SORT file2 using IP address in first column 2- Merge the 1st, 3rd and 5th columns of File1 with File 2 i need to create a new file which will look: 128.3.45.10 ioc-sea-lm 169.182.111.161 microsoft-ds 0 0 3 186 3 186 --> 2122 80 8 128.3.45.10 hypercube-lm 169.182.111.161 https 0 0 3 186 3 186 --> 2123 22 9 128.3.44.112 pay-per-view 148.184.171.6 netbios-ssn 0 0 3 186 3 186 --> * * * 128.3.45.12 cadabra-lm 148.184.171.6 microsoft-ds 0 0 3 186 3 186 --> * * * basically port numbers and index number will be added.

    Read the article

  • Are there any negative impact running all services on a single static IP?

    - by Jake
    I need to setup a VPN trunk (with remote branch office location), Video Conference and Web Server on-premise in the office. I am used to ISP providing blocks of 8 or 16 IPs. But I have a new ISP which says they only can provide a single IP. Are there any issues with running all services on a single IP? I don't think this has any thing to do with bandwidth..? I'm not using SSL certificates... I can do port forwarding to different machines... What else...? Disclaimer: I am a programmer by training. Sorry for noob question.

    Read the article

  • Remove parent of matched locator

    - by Ilan
    Is there a way to locate a node based child properties? I need to run a web.config transform to remove the 2nd <dependentAssembly in the following: <runtime> <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1"> <!-- Don't want to delete this one --> <dependentAssembly> <assemblyIdentity name="System.Web.Helpers" publicKeyToken="31bf3856ad364e35"/> <bindingRedirect oldVersion="1.0.0.0-2.0.0.0" newVersion="2.0.0.0"/> </dependentAssembly> <!-- This is the one I want to delete --> <dependentAssembly> <assemblyIdentity name="Microsoft.VisualStudio.Enterprise.AspNetHelper" publicKeyToken="b03f5f7f11d50a3a" culture="neutral"/> <codeBase version="11.0.0.0" href="file:///C:/Program%20Files%20(x86)/Microsoft%20Visual%20Studio%2011.0/Common7/IDE/PrivateAssemblies/Microsoft.VisualStudio.Enterprise.AspNetHelper.DLL"/> </dependentAssembly> </assemblyBinding> </runtime> Finding the <assemblyIdentity is easy enough, but I need to delete the parent <dependentAssembly (and <codeBase). If there was a "xdt:Transform="RemoveParent" this would do the trick, but AFAIK there isn't. Alternatively if there was a Locator I could use on the <dependentAssembly which would match children, then that could work too.

    Read the article

  • Is real-time or synchronous replication possible over WAN link?

    - by johnnyb10
    The company I work for is looking to implement truly real-time file replication with file locking over a WAN link that spans over 2000 miles. We currently have a 16-drive SAN setup in our east coast office. We also have an office out in Colorado that will have the same exact SAN setup. The idea is to have those two SANs contain the same exact data at all times, which will allow us to work with the same data pool, and which will also provide use with an offsite backup solution, should a failure occur on either end. We're running Server 2008. The objective is to enable users in the east coast office to work on files and have those changes be instantly updated on the Colorado SAN as well. We also need there to be file locking so that there will be no conflicts or overwritten changes if users attempt to work on the same file. Is this scenario even possible, at speeds that would make the files usable? And if so, what software would we need to pull this off? As I understand it, DFS-R does not provide file locking, so if we used that, we would need to go with a third-party product like Peerlock. But I don't even know if DFS-R is an option. Can it replicate quickly enough over a WAN link? Can any product? It seems that if we were to use synchronous replication, the programs would be unacceptably slow, as every write would have to wait for confirmation from the other end of the link. But if we used asynchronous replication, what kind of latency would we be looking at? There is a product from GlobalScape called WAFS that claims to provide "File coherence with real-time file locking, file release, and synchronization" and says that "As files are modified, changes are mirrored instantly using intelligent byte-level differencing to minimize the impact on network bandwidth". So this sounds like synchronous replication, but that doesn't even seem possible, given physical limitations such as the speed of light. If anyone has any experience with this kind of setup, or knows whether it's even possible, I'd appreciate your input and suggestions, including recommendations for software that we should check out.

    Read the article

  • Error building Visual Studio 2010 Silverlight 4 projects on Windows 7 with XP Mode

    - by Kevin Dente
    I installed Visual Studio 2010 Beta 2 in an XP Mode VM on Windows 7. Then I created a trivial Silverlight 4 (beta) project and tried to build it. I get the following error: Error 1 The "ValidateXaml" task failed unexpectedly. System.IO.FileLoadException: Could not load file or assembly 'file://\tsclient\d\Users\me\Documents\Visual Studio 2010\Projects\SilverlightApplication2\SilverlightApplication2\obj\Debug\SilverlightApplication2.dll' or one of its dependencies. Operation is not supported. (Exception from HRESULT: 0x80131515) File name: 'file://\tsclient\d\Users\me\Documents\Visual Studio 2010\Projects\SilverlightApplication2\SilverlightApplication2\obj\Debug\SilverlightApplication2.dll' --- System.NotSupportedException: An attempt was made to load an assembly from a network location which would have caused the assembly to be sandboxed in previous versions of the .NET Framework. This release of the .NET Framework does not enable CAS policy by default, so this load may be dangerous. If this load is not intended to sandbox the assembly, please enable the loadFromRemoteSources switch. See http://go.microsoft.com/fwlink/?LinkId=155569 for more information. at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, Boolean throwOnFileNotFound, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection, Boolean suppressSecurityChecks) at System.Reflection.RuntimeAssembly.InternalLoadFrom(String assemblyFile, Evidence securityEvidence, Byte[] hashValue, AssemblyHashAlgorithm hashAlgorithm, Boolean forIntrospection, Boolean suppressSecurityChecks, StackCrawlMark& stackMark) at System.Reflection.Assembly.LoadFrom(String assemblyFile) at Microsoft.Silverlight.Build.Tasks.ValidateXaml.XamlValidator.Execute(ITask task) at Microsoft.Silverlight.Build.Tasks.ValidateXaml.XamlValidator.Execute(ITask task) at Microsoft.Silverlight.Build.Tasks.ValidateXaml.Execute() at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute() at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) I believe this is related to the fact that XP Mode redirects the My Documents folder to the host, turning it into a network share location, and some sort of CAS / security policy is being triggered. Anyone know how to fix it?

    Read the article

  • Appending URL's in Google Custom Search Results

    - by Paul Owens
    Let's say that the Google Custom Search Engine on my website is returning results like the following: Campine chickens - buy discount chickens online ... blah...blah...blah...blahblah...blahblah...blah www.pollosshop.co.uk/poultry/Campine/3941 Pollo's Staff Picks blah...blahblah...blahblah...blahblah...blah www.pollosshop.co.uk/staff-picks/ Is there anyway to append a tracking parameter to the URL's so that they become: Campine chickens - buy discount chickens online ... blah...blah...blah...blahblah...blahblah...blah www.pollosshop.co.uk/poultry/Campine/3941?track=fromsearch Pollo's Staff Picks blah...blahblah...blahblah...blahblah...blah www.pollosshop.co.uk/staff-picks/?track=fromsearch ?

    Read the article

  • VNC Server running on Linux machine to access all the terminals open on the Linux

    - by goldenmean
    I have a Linux Ubuntu(11.10) box at work, on which I open 4 terminals and execute different processes(my code). I run vncserver on this Linux box, so as to access it remotely. When I login to my office Windows PC using vpn, I would like to connect to this office Linux desktop using VNC Client and be able to see all the Linxu desktop which had my 4 open terminals executing the programs. How to use VNC to view Desktop of Linux PC and all the terminals associated to that which I opened to execute my programs?

    Read the article

  • Sharing files from Ubuntu to Mac

    - by seengee
    Hi, Running Ubuntu 10.04 in one office and we want a couple of Mac's in another office to be able to connect to shares on this computer. Want a fairly simple solution to this if one exists. Started looking at setting up a VPN using PPTP but it seems quite complicated. Also seen mention of VNC but this seems more related to sharing desktops and all i want to do is share a directory. Could i just install open SSH and have the Mac users mount a share over SSH using public/private key encryption?

    Read the article

< Previous Page | 358 359 360 361 362 363 364 365 366 367 368 369  | Next Page >