Search Results

Search found 11906 results on 477 pages for 'ip restrictions'.

Page 364/477 | < Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >

• Connect to server in VMWare player while host is not connected to a network

  - by blockcipher

  Hello, I have a linux server VM on my host machine using VMWare player and if I'm on a network, I can connect to the web server on the VM via a web browser. However, I tried to do the same while I was disconnected from a network and I couldn't. The networking is set to Host-only and I did use dhclient/ifconfig to make sure that yes, I did have an IP address assigned to the VM. While I can work around this, the purpose of the VM is to allow us to demo our app from any machine and that machine may not be connected to a network. Thanks.

  Read the article

• pfSense router gives DNS rebinding warning when accessing subdomains

  - by Richard Maddis

  I have just set up a router running pfSense on our network and forwarded the appropriate ports. I have a small web server running in my network, and a domain name pointing to our (WAN) IP. When accessing that domain name, everything works fine. However, when accessing a subdomain of the domain name, pfSense will give a DNS rebinding warning. This did not happen back when I used a DD-WRT router. What is the proper way to fix this? The DNS records for the subdomain also point to the same address (I use a virtual server to differentiate the subdomains.)

  Read the article

• Sending a mail to gmail from my local mail server

  - by tambia

  I just configured a mail server and tried sending a mail to my gmail account with a local email I created with my mail servers dns. I didn't go well. I use redhat server and sendmail and the testing was done with evolution mail. I had the following error : "RCPT TO<[email protected]> failed: <[email protected]>... relaying temporarily denied. Cannot resolve PTR for my ip" How can I solve this?

  Read the article

• How do I map a friendly name (e.g. www.example.com) to 127.0.0.1:port# on Mac OS X

  - by Fred Finkle

  I am trying to create a demo for a class of mine and I want to configure "fake" domain names on my laptop. A previous question "Can I specify a port in an entry in my /etc/hosts on OS X?" contained an answer indicating that to do it you must use /etc/hosts plus changes to the iptables "If OS X uses iptables you could point xyz.com to some ip in the hosts file like 157.166.226.25 and then: sudo iptables -t nat -A OUTPUT -p tcp --dport 80 -d 157.166.226.25 -j DNAT --to-destination 127.0.0.1:3000 " Since OS X doesn't use iptables, how do I do the equivalent using the tools available on OS X? (the original "asker" seemed to know how to do this, so it wasn't explained). Thanks in advance.

  Read the article

• Device that connects to a switch via RJ45, that emulates a PC

  - by Mike Christiansen

  One of my co-workers once saw a device that plugged into a RJ45 jack, that emulated a PC. It could be configured with an IP address, and respond to pings. I was wondering if anyone knew about these, or even what they are called? This will be used to simulate a PC in a classroom environment. Thanks in advance. Edit: This is a CCNA classroom, we are looking to simulate a PC connected to an ethernet port on a router. These will be on different subnets, etc. This might be doable with a VM through VLANs and virtual switches, but then we are getting away from configuring the physical ports on the router the way we want to.

  Read the article

• How to tunnel local port through proxy server?

  - by Joe Casadonte

  I have a non-proxy-aware program that I need to get working through an HTTP proxy server. The program (MYPROG) running on a machine I can configure at will (MYSRV) connects to a specific server (DESTSRV) on a specific port (DESTPRT). There is an existing HTTP proxy server (PROXYSRV:PROXYPRT) that will allow the traffic through if MYPROG was proxy-aware, but it isn't. Is there a way to listen locally on a specific port and forward the traffic through the proxy server? I can totally configure where MYPROG points to, so I could point it to MYSRV:4545 with the thought that some wonder program will redirect the data to DESTSRV:DESTPRT through PROXYSRV:PROXYPRT. I'm thinking IP Tables or netcat could do the trick if only I could figure them out... Thanks!

  Read the article

• Ubuntu Wired network(ethernet does not work)

  - by user36777

  It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet. Here are the details from route, iptables, ifconfig, ping etc. Any ideas? I have been struggling with this for day, none seems to have an answer. http://pastie.org/954816

  Read the article

• How can I redirect HTTPS(S) traffic to anothr gateway?

  - by PsyStyle

  I have a network like 192.168.0.0/15 with the default gateway set to 192.168.0.1. Al the workstations of the network use this gateway for all kind of accesses to the Internet. Now I am testing a new Internet connection with another provider and for this I am using a second gateway on the same subnet with 192.168.0.2 as IP address. I want to redirect only HTTP and HTTPS traffic to this second gateway without touching the address of the default gateway set inside every workstation. How can I accomplish this task? What I have to change inside the first's gateway firewall configuration or routes? I tried with a dnat like DNAT loc:192.168.0.1 loc:192.168.0.2 tcp 80 but nothing worked. I use Shorewall for simplicity in configuration but I can understand even theorical answers which I will try to adapt to my case

  Read the article

• What is causing my wireless problems?

  - by user34629

  I have a Dell XPS M1330, since I moved to my new house, the wireless barely works on it, my housemates report no problems, so I guess it's something to do with my laptop. It's eratic in normal mode, sometimes not working for days, usually working on-and-off, forcing me to reload pages a few times before they work, etc. It works perfectly in safe mode, the driver I'm using is the Intel PRO/Wireless 3945ABG Network Connection, version 12.4.4.5, with a date at 26/10/2009, the most recent one I could find, bluetooth is not enabled, and I'm running Vista 32-bit Home Premium, which it shipped with. I also tried disabling IPv6 and resetting the IP stack, both to no avail. Can anybody help me?

  Read the article

• Hyper-V can't connect from host to guest via RDC

  - by Mark

  As the title describes I would like to connect via Remote Desktop Connection to my VM. I want to use it as a Dev-machine and therefore would like to work full screen, as far as I understand RDC is the way to go. I have created an internal network connection within Hyper-V, assigned it to my VM, set a static IP/Subnet on guest (Win7 Pro) and host(Win8.1 Enterprise). It worked good for the first couple of times but now it seems to be broken or I have to do odd enable/disable network connection "dances" to get it running. Ping also doesn't work always so it does seem as if the guest and host would be "disconnected".. Is there something I can do so that the network connection always will be established?

  Read the article

• Why can't I access the WebUI of my DNS-323 NAS after a firmware upgrade?

  - by anonymous2

  Hi Everyone, I just bought a D-Link DNS-323 NAS Enclosure, and have run into a problem. I read that the firmware that had shipped with (1.07) did not support 2TB drives, so I downloaded firmware 1.08. Turned on the device for thwe first time and went straight to the WebUI (everything looked/worked fine) Proceeded with the firmware update, completed successfully. Rebooted and I cannot access the WebUI. I can see the NAS connected via my router interface I can also ping the ip adress assigned, but I cannot access the WebUI or find it via D-Link easy search software. I have tried the factory reset button, but that does not seem to be doing anything, the square blue light just keeps flashing from the moment the unit is powered on, whether I press the reset button or not, and the symptoms remain the same... PS. I did/do not have any drives installed yet. Please help?

  Read the article

• IE Search Provider: Specifying gTLD / Country-Specific Site

  - by jwa

  I am based in the UK, and as such typically use google.co.uk as my search engine. However, my employer is based in continental Europe, and thus my internet proxy is located overseas. As a result, IP geo-location presents a location outside of the UK. Google detects this, and as a result will redirect my searches from the address bar to a foreign Google domain. This leads to "local" answers having a higher ranking, many of which are not written in English language! Is there a specific search provider / URL I can give to IE which will use a specific gTLD of google (.co.uk), rather than performing the location-based redirect?

  Read the article

• Linux server failover

  - by Lukasz

  I have two Linux servers (CentOS6) - both are identically configured connected to the same switch with a direct link between them. I only have one external IP that is assigned to eth0 on both servers (connected to the internet switch) with the interface shutdown on server 2. How can I failover to server 2 if server 1 dies - as stated they are linked directly so they can check for availability of each other via ping/tcp/udp. I toyed with Heartbeat but the documentation seems to be non-existent - not sure how to bring up an interface and start some services if the other server dies.

  Read the article

• Setting up proxy to handle subdomain requests

  - by PeeHaa

  I have setup a proxy for a site which works with the following nginx config: server { listen 80; server_name proxy.example.com; access_log /dev/null; error_log /dev/null; location / { proxy_pass http://thepiratebay.se; proxy_set_header X-Real-IP $remote_addr; } } However on this there are also styles loaded from a subdomain (static.thepiratebay.se) which aren't going through my proxy, because it links to the original domain. Is there a way to also let those requests go to my proxy? Do I have to change the contents of the pages when serving it to let them also go through my proxy? If so: how? :) Or is there another (perhaps better) way?

  Read the article

• How to connect another computer to the router

  - by Call Me Dummy

  I already have a Windows 7 PC connected to my NETGEAR WGR614v10 router and I am able to use internet in that computer. Now I need to connect one of my old computer to the router to share the internet. It's also running Windows 7. I already connected it to the router via a CAT-5 cable but I am not able to use internet. The first computer was set up by a technician. Its IP address is 192.168.1.3, and the default gateway is 192.168.1.1. On the second PC, I changed the IPv4 to 192.168.1.4 and default gateway and preferred DNS to 192.168.1.1, but it's not working. What can I do?

  Read the article

• Windows Load Balancing Services and File Shares

  - by cbkadel

  We are using Windows Load Balancing Services (WLBS). One of the things that I do notice, is that if I create a File Share on one of the physical hosts, I am able browse to that file share using the clustered-ip address. This might be a 'opinion' question, but I haven't been able to find much literature on file shares in particular with wlbs. Is this a recommendation configuration? Are there any limitations? What about when the share contains different sets of content on both hosts? For instance: Three 'hostnames' - host1 (physical1), host2 (physical2), and cluster. I create the following shares: \physical1\myshare \physical2\myshare What I notice is that i can see: \cluster\myshare I'm guessing that this is read-only, and that there's no file synchronization. But what happens if they are in fact out of sync, what would a network browser see then? Thanks for your time!

  Read the article

• Redirecting a subdomain to subdomain/folder

  - by Johnbritto

  I have linux server with plesk panel. I am running sourceforge VM in NAT mode with static ip 172.16.63.XX. In my host i have configured subdomain's (vhost.conf) with proxypass to connect with VM machine.. I can access sourceforge VM with http. I am searching for http redirecting to https. http://xxx.mydomain.com -- https://xxx.mydomain.com/sf/sfmain/do/home/ . just need to know, If I own a SSL for mydomain.com. if i redirect a xxx.mydomain.com to mydomain.com/folder will the SSL will be applied to redirected domain? i.e mydomain.com/folder?

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

• Hosting company that does Linux VPS and MS SQL

  - by danielmcq

  I'm looking for hosted solutions but there are so many companies that finding the right one using a Google search is a bit overwhelming. Ideally I would like a hosting company which has following options: -Linux VPSs - Individual VPSs should be fairly cheap since I plan on putting one or two services per VPS i.e web server on one (httpd and ColdFusion), an SVN server on another, etc. -Managed MS SQL databases - My company already has data in MS SQL databases and a lot of ColdFusion code written that has MS SQL specific commands in it. -Individually purchased dedicated IP addresses -Preferably located in the North America region My plan would be to setup one Linux VPS as a gateway/firewall/VPN server and have all of my traffic routed through so that my other servers would not use of bandwidth by talking to each other. The trick is also finding a company that does Linux VPS AND MS SQL databases. Does anybody know of any hosting companies offer what I'm looking for? Let me know if I need to add more details.

  Read the article

• Routing DHCP traffic over the internet

  - by rmanna

  i'd like to know if it's possible for the internet to be between a DHCP server and the network it's "assigned" to? so basically, something like this: -------------- ------------- ------------- | DHCP Server | | DHCP | | Clients | | |-----Internet-----| Relay Agent |------| 192.168.0.* | | | | 192.168.0.1 | | | -------------- ------------- ------------- the behavior i'm seeing is that the DHCP server is offering 192.168.0.* IPs and sending them back to 192.168.0.1, which it can't reach. i tried masquerading the packets sent by the relay agent but that doesn't seem to work. from what i've been reading, this is normal behavior since the DHCP server uses the GIADDR as the destination address for its OFFERs, and not the actual source IP of the packets it receives from the relay agent. sooo, given that my DHCP server needs to be "on the other side of the internet" as depicted above, how can i get this working? are there settings for dhcpd to do this or is creating a VPN containing the DHCP server and the relay agent the only way? thanks!

  Read the article

• Apache redirect some requests to another server

  - by mucie

  We just bought a new server. We want our old server to respond the https connections(because of ssl certificate) and new server to respond the rest. New server is ready but i don't know how to redirect requests to new one. mydomain.com => old machine ip 10.10.10.41 => new machine Requests will come through mydomain.com. If it is https: respond else redirect to 10.10.10.41 How should i configure apache for this situation?

  Read the article

• Access Windows VPN DNS from Ubuntu

  - by user46427

  I am using Ubuntu 10.04 to access a Windows VPN. I connect to the VPN from Ubuntu, and when I open a Windows 7 virtual machine (VirtualBox), everything works great ... I can access local network drives, ping local servers, remote into local machines, etc. However, I can do none of this from Ubuntu. With the VPN connected, I cannot even ping anything within the VPN local network. I'm guessing it's a DNS issue that Windows is handling automatically but Ubuntu needs a setting somewhere to tell it to use the DNS servers of the VPN network? Any ideas? I'm a relative novice to Ubuntu, esp. VPN in Ubuntu. [EDIT] Actually, I'm almost positive it is DNS, because if I get the IP address from the Windows VM I can use Terminal Server Client to remote into a machine.

  Read the article

• Cannot access Nagios Web Interface

  - by Dominiqs

  After successfully installing Nagios core 3.4.1 (i also installed plug-in1.4.11) on our linux rhel 5.3 server i cannot login to the nagios web interface.I am running apache 2.2.3 I am using internet explorer 8 and also firefox 3.6.3 When i try to enter the url http//localhost/nagios/ on a desktop (on the same network as the Nagios server)it does seem to like it but if i try http//x.x.x.x/nagios/ (where x.x.x.x is the IP address of my nagios server) it likes it but then the authentication popup appears after entering the password and username(nagiosadmin) it throws the errors below The server x.x.x.x at Nagios access requires a username and password Warning this server is requesting that your username and password be sent in an insecure manner(basic authentication without a secure connection) After a few attempts i get error 401 authentication required error from internet explorer ;this server could not verify that you are authorized to access the document requested. Either you supplied the wrong credentials or your browser doesnt understand how to supply the credentials required. Help Please anyone..seems like an authentication issue

  Read the article

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• Connecting client to JBoss cluster

  - by Nivek

  I am new to JBoss. Basically I have managed to cluster 2 nodes with: Node 1: run.bat -c all -g DefaultPartition –u 230.0.0.4 -b 10.67.51.28 -Djboss.messaging.ServerPeerID=1 Node 2: run.bat -c all -g DefaultPartition –u 230.0.0.4 -b 10.67.50.21 -Djboss.messaging.ServerPeerID=2 I know that if i cofigure a Apache load balancing(Mod_JK) to sit infront of the cluster, the client simply just punch in the IP of the Apache, and Apache will redirect the traffic to the nodes. But I do not want to have a Apache infront of the cluster. So how do my client access the cluster?? Do i need to configure something in JBoss, or isit a MUST to have a load balancer for the client to access the cluster?? MANY thanks in advance....

  Read the article

< Previous Page | 360 361 362 363 364 365 366 367 368 369 370 371  | Next Page >