Search Results

Search found 19628 results on 786 pages for 'late static binding'.

Page 365/786 | < Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >

  • Block SMTP session with sender domain which doesn't itself accept SMTP connection.

    - by bignose
    I'm administrating a mail service for a small business. Their mail host's internet connection is an ADSL service with a permanent IP address. Unfortunately, many misconfigured mail systems will happily deliver to this host, but, when the host attempts to send mail back (e.g. a bounce notice, or a normal response from someone), the declared sender's domain has an MX which refuses to receive connections from this host. That misconfiguration makes their system a one-way mail sender, which is a problem. How can I configure Postfix on this customer's mail host to refuse SMTP sessions that declare a sender domain which itself refuses SMTP from this host? That is, if the SMTP client declares a domain that we can't make SMTP connections back to, then there's not much point accepting the incoming connection in the first place. Note that I'm not, as some commenters have assumed, talking about checking whether the SMTP client will receive messages. The check I want is whether the declared sender's domain (regardless of who the current SMTP client is) will accept SMTP connections from here. In other words: when we get around to sending a message back, we'll need the sender's domain to accept SMTP connections; I want to do that check before accepting the incoming session. I'm imagining a late check (after the low-cost checks to winnow most of the rubbish connections) that keeps the client on the other end while it attempts an SMTP client connection back to the declared domain of the sender. If that connection is rejected, the incoming one is also rejected. I'm also open to other suggestions for how this problem might be addressed (short of not using this mail host at all, which isn't an option).

    Read the article

  • Why my object sees variables which were not given to it in the constructor?

    - by Roman
    I have the following code. Which is "correct" and which I do not understand: private static void updateGUI(final int i, final JLabel label) { SwingUtilities.invokeLater( new Runnable() { public void run() { label.setText("You have " + i + " seconds."); } } ); } I create a new instance of the Runnable class and then in the run method of this instance I use variables label and i. It works, but I do not understand why it work. Why the considered object sees values of these variables. According to my understanding the code should look like that (and its wrong): private static void updateGUI(final int i, final JLabel label) { SwingUtilities.invokeLater(new Runnable(i,label) { public Runnable(int i, JLabel label) { this.i = i; this.label = label; } public void run() { label.setText("You have " + i + " seconds."); } }); } So, I would give the i and label variables to the constructor so the object can access them... By the way, in the updateGUI I use final before the i and label. I think I used final because compiler wanted that. But I do not understand why.

    Read the article

  • Linux: modpost does not build anything

    - by waffleman
    I am having problems getting any kernel modules to build on my machine. Whenever I build a module, modpost always says there are zero modules: MODPOST 0 modules To troubleshoot the problem, I wrote a test module (hello.c): #include <linux/module.h> /* Needed by all modules */ #include <linux/kernel.h> /* Needed for KERN_INFO */ #include <linux/init.h> /* Needed for the macros */ static int __init hello_start(void) { printk(KERN_INFO "Loading hello module...\n"); printk(KERN_INFO "Hello world\n"); return 0; } static void __exit hello_end(void) { printk(KERN_INFO "Goodbye Mr.\n"); } module_init(hello_start); module_exit(hello_end); Here is the Makefile for the module: obj-m = hello.o KVERSION = $(shell uname -r) all: make -C /lib/modules/$(KVERSION)/build M=$(shell pwd) modules clean: make -C /lib/modules/$(KVERSION)/build M=$(shell pwd) clean When I build it on my machine, I get the following output: make -C /lib/modules/2.6.32-27-generic/build M=/home/waffleman/tmp/mod-test modules make[1]: Entering directory `/usr/src/linux-headers-2.6.32-27-generic' CC [M] /home/waffleman/tmp/mod-test/hello.o Building modules, stage 2. MODPOST 0 modules make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-27-generic' When I make the module on another machine, it is successful: make -C /lib/modules/2.6.24-27-generic/build M=/home/somedude/tmp/mod-test modules make[1]: Entering directory `/usr/src/linux-headers-2.6.24-27-generic' CC [M] /home/somedude/tmp/mod-test/hello.o Building modules, stage 2. MODPOST 1 modules CC /home/somedude/tmp/mod-test/hello.mod.o LD [M] /home/somedude/tmp/mod-test/hello.ko make[1]: Leaving directory `/usr/src/linux-headers-2.6.24-27-generic' I looked for any relevant documentation about modpost, but found little. Anyone know how modpost decides what to build? Is there an environment that I am possibly missing? BTW here is what I am running: uname -a Linux waffleman-desktop 2.6.32-27-generic #49-Ubuntu SMP Wed Dec 1 23:52:12 UTC 2010 i686 GNU/Linux

    Read the article

  • Getting value from pointer

    - by Eric
    Hi, I'm having problem getting the value from a pointer. I have the following code in C++: void* Nodo::readArray(VarHash& var, string varName, int posicion, float& d) { //some code before... void* res; float num = bit.getFloatFromArray(arregloTemp); //THIS FUNCTION RETURN A FLOAT AND IT'S OK cout << "NUMBER " << num << endl; d = num; res = &num; return res } int main() { float d = 0.0; void* res = n.readArray(v, "c", 0, d); //THE VALUES OF THE ARRAY ARE: {65.5, 66.5}; float* car3 = (float*)res; cout << "RESULT_READARRAY " << *car3 << endl; cout << "FLOAT REFERENCE: " << d << endl; } The result of running this code is the following: NUMBER 65.5 RESULT_READARRAY -1.2001 //INCORRECT IT SHOULD BE LIKE NUMBER FLOAT REFERENCE: 65.5 //CORRECT NUMBER 66.5 RESULT_READARRAY -1.2001 //INCORRECT IT SHOULD BE LIKE NUMBER FLOAT REFERENCE: 66.5 //CORRECT For some reason, when I get the value of the pointer returned by the function called readArray is incorrect. I'm passing a float variable(d) as a reference in the same function just to verify that the value is ok, and as you can see, THE FLOAT REFERENCE matches the NUMBER. If I declare the variable num(read array) as a static float, the first RESULT_READARRAY will be 65.5, that is correct, however, the next value will be the same instead of 66.5. Let me show you the result of running the code using static float variable: NUMBER 65.5 RESULT_READARRAY 65.5 //PERFECT FLOAT REFERENCE: 65.5 //¨PERFECT NUMBER 65.5 //THIS IS INCORRECT, IT SHOULD BE 66.5 RESULT_READARRAY 65.5 FLOAT REFERENCE: 65.5 Do you know how can I get the correct value returned by the function called readArray()?

    Read the article

  • How to write Java-like enums in C++ ?

    - by Rahul G
    Coming from Java background, I find C++'s enums very lame. I wanted to know how to write Java-like enums (the ones in which the enum values are objects, and can have attributes and methods) in C++. As an example, translate the following Java code (a part of it, sufficient to demonstrate the technique) to C++ : public enum Planet { MERCURY (3.303e+23, 2.4397e6), VENUS (4.869e+24, 6.0518e6), EARTH (5.976e+24, 6.37814e6), MARS (6.421e+23, 3.3972e6), JUPITER (1.9e+27, 7.1492e7), SATURN (5.688e+26, 6.0268e7), URANUS (8.686e+25, 2.5559e7), NEPTUNE (1.024e+26, 2.4746e7); private final double mass; // in kilograms private final double radius; // in meters Planet(double mass, double radius) { this.mass = mass; this.radius = radius; } private double mass() { return mass; } private double radius() { return radius; } // universal gravitational constant (m3 kg-1 s-2) public static final double G = 6.67300E-11; double surfaceGravity() { return G * mass / (radius * radius); } double surfaceWeight(double otherMass) { return otherMass * surfaceGravity(); } public static void main(String[] args) { if (args.length != 1) { System.err.println("Usage: java Planet <earth_weight>"); System.exit(-1); } double earthWeight = Double.parseDouble(args[0]); double mass = earthWeight/EARTH.surfaceGravity(); for (Planet p : Planet.values()) System.out.printf("Your weight on %s is %f%n", p, p.surfaceWeight(mass)); } } Any hep would be greatly appreciated! Thanks!

    Read the article

  • Using generics in F# to create an EnumArray type

    - by Matthew
    I've created an F# class to represent an array that allocates one element for each value of a specific enum. I'm using an explicit constructor that creates a dictionary from enum values to array indices, and an Item property so that you can write expressions like: let my_array = new EnumArray<EnumType, int> my_array.[EnumType.enum_value] <- 5 However, I'm getting the following obscure compilation error at the line marked with '// FS0670' below. error FS0670: This code is not sufficiently generic. The type variable ^e when ^e : enum<int> and ^e : equality and ^e : (static member op_Explicit : ^e -> int) could not be generalized because it would escape its scope. I'm at a loss - can anyone explain this error? type EnumArray< 'e, 'v when 'e : enum<int> and 'e : equality and ^e : (static member op_Explicit : ^e -> int) > = val enum_to_int : Dictionary<'e, int> val a : 'v array new() as this = { enum_to_int = new Dictionary<'e, int>() a = Array.zeroCreate (Enum.GetValues(typeof<'e>).Length) } then for (e : obj) in Enum.GetValues(typeof<'e>) do this.enum_to_int.Add(e :?> 'e, int(e :?> 'e)) member this.Item with get (idx : 'e) : 'v = this.a.[this.enum_to_int.[idx]] // FS0670 and set (idx : 'e) (c : 'v) = this.a.[this.enum_to_int.[idx]] <- c

    Read the article

  • How can I pass a const array or a variable array to a function in C?

    - by CSharperWithJava
    I have a simple function Bar that uses a set of values from a data set that is passed in in the form of an Array of data structures. The data can come from two sources: a constant initialized array of default values, or a dynamically updated cache. The calling function determines which data is used and should be passed to Bar. Bar doesn't need to edit any of the data and in fact should never do so. How should I declare Bar's data parameter so that I can provide data from either set? union Foo { long _long; int _int; } static const Foo DEFAULTS[8] = {1,10,100,1000,10000,100000,1000000,10000000}; static Foo Cache[8] = {0}; void Bar(Foo* dataSet, int len);//example function prototype Note, this is C, NOT C++ if that makes a difference; Edit Oh, one more thing. When I use the example prototype I get a type qualifier mismatch warning, (because I'm passing a mutable reference to a const array?). What do I have to change for that?

    Read the article

  • git : The remote end hung up unexpectedly - too many simultaneous users?

    - by Pritam Barhate
    I asked this first on StackOverflow and I was suggested that I should ask it here: We have a self hosted git server (Gitolite) on a VPS account (CPU:2.68GHz RAM:1824MB). This same VPS is also used to publish our underdevelopment web apps for client demos. (Very little traffic). so the main use of the server is as a Git Server Only. This git server is accessed by a team of 30-40 people for various projects. Our problem is that during the day when 6-7 people are trying to access the server (sometimes same repo) we get frequent error message: ssh: connect to host xxx.xxx.xx.xx port 22: Bad file number fatal: The remote end hung up unexpectedly After trying for 10-15 minutes it generally succeeds. During early mornings and late nights when there are only 1-2 people, git commands work with 100% success rate. Also I would like to note that if I access the other file hosted on the server through HTTP it works fine. I found a couple of questions on StackOverflow and on other sites regarding this. But most of the people point towards SSH key set up or conflicts between Msysgit and Cygns SSH. However I don't think this is the problem in our case as we get this behavior on Windows (using msysgit only) as well as Mac Machines. Also if it was SSH configuration issue then it shouldn't work at all. But in our case it works after 10-15 minutes. I think in our case it might be too many simultaneous connections to same server (or same repo) or something like that. Does there exists a setting or a conf file that needs to modified to solve this problem? Please help me solve this problem or point me in the right direction. Thanks in advance. Pritam.

    Read the article

  • ASP.NET MVC 3 embrace dynamic type - CSDN.NET - CSDN Software Development Channel

    - by user559071
    About a decade ago, Microsoft will all bet on the WebForms and static types. With the complete package from scattered to the continuous development, and now almost every page can be viewed as its own procedure. Subsequent years, the industry continued to move in another direction, love is better than separation package, better than the late binding early binding to the idea. This leads to two very interesting questions. The first is the problem of terminology. Consider the original Smalltalk MVC model, view and controller is not only tightly coupled together, and usually in pairs. Most of the framework is that Microsoft, including the classic VB, WinForms, WebForms, WPF and Silverlight, they both use the code behind file to store the controller logic. But said "MVC" usually refers to the view and controller are loosely coupled framework. This is especially true for the Web framework, HTML form submission mechanism allows any views submitted to any of the controller. Since this article was mainly talking about Web technologies, so we need to use the modern definition. The second question is "If you're Microsoft, how to change orbit without causing too much pressure to the developer?" So far, the answer is: new releases each year, until the developers meet up. ASP.NET MVC's first product was released last March. Released in March this year, ASP.NET MVC 2.0. 3.0 RC 2 is currently in phase, expected to be released next March. December 10, Microsoft released ASP.NET MVC 3.0 Release Candidate 2. RC 2 is built on top of Microsoft's commitment to the jQuery: The default project template into jQuery 1.4.4, jQuery Validation 1.7 and jQuery UI. Although people think that Microsoft will focus shifted away from server-side controls to be a joke, but the introduction of Microsoft's jQuery UI is that this is the real thing. For those worried about the scalability of the developers, there are many excellent control can replace the session state. With SessionState property, you can tell the controller session state is read-only, read-write, or can be completely ignored in the. This site is no single server, but if a server needs to access another server session state, then this approach can provide a great help. MVC 3 contains Razor view engine. By default, the engine will be encoded HTML output, so that we can easily output on the screen the text of the original. HTML injection attacks even without the risk of encoded text can not easily prevent the page rendering. For many C # developers in the end do what is most shocking that MVC 3 for the controller and view and embrace the dynamic type. ViewBag property will open a dynamic object, developers can run on top of the object to add attributes. In general, it is used to send the view from the controller non-mode data. Scott Guthrie provides state of the sample contains text (such as the current time) and used to assemble the list box entries. Asked Link: http://www.infoq.com/cn/news/2010/12/ASPNET-MVC-3-RC-2; jsessionid = 3561C3B7957F1FB97848950809AD9483

    Read the article

  • Bad request - Invalid Hostname Error when using ARR IP address

    - by syloc
    I'm trying to setup a simple ARR system. I have 1 ARR machine load balancing between 2 APP servers. I can reach the app sites if i use the server name of the ARR machine. (http://arrserver/app) But i can't do it with its IP address. (http://10.7.10.25/app). It gives the "Bad Request - Invalid Hostname". In the ARR machine i configured the default site's bindings to "All Unassigned","80" (default values). Do i need to change the binding rule or need additional url rewrite rules? And also, in the ARR server http://127.0.0.1/app doesn't work. But http://localhost/app works fine. Thx in advance

    Read the article

  • Expression Blend doesn't recognize command objects declared in code behind file

    - by Brian Ensink
    I have a WPF UserControl. The code behind file declares some RoutedUICommand objects which are referenced in the XAML. The application builds and runs just fine. However Expression Blend 3 cannot load the XAML in the designer and gives errors like this one: The member "ResetCameraCommand" is not recognized or accessible. The class and the member are both public. Building and rebuilding the project in Blend and restarting Blend hasn't helped. Any ideas what the problem is? Here are fragments of my XAML ... <UserControl x:Class="CAP.Visual.CameraAndLightingControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:local="clr-namespace:CAP.Visual;assembly=VisualApp" Height="100" Width="700"> <UserControl.CommandBindings> <CommandBinding Command="local:CameraAndLightingControl.ResetCameraCommand" Executed="ResetCamera_Executed" CanExecute="ResetCamera_CanExecute"/> </UserControl.CommandBindings> .... ... and the code behind C# namespace CAP.Visual { public partial class CameraAndLightingControl : UserControl { public readonly static RoutedUICommand ResetCameraCommand; static CameraAndLightingControl() { ResetCameraCommand = new RoutedUICommand("Reset Camera", "ResetCamera", typeof(CameraAndLightingControl)); }

    Read the article

  • one table is shared between several websites

    - by sami
    I have a static table that's shared by several websites. By static, I mean that the data is read but never updated by the websites. Currently, all websites are served from the same server but that may change. I want to minimize the need for creating/maintaining this table for each of the websites, so I thought about turning it to an xml file that's stored in a shared library that all websites have access to. The problem is I use an ORM and use forign key constraints to ensure integrity of the ids used from that table, so by removing that table out of the MySQL database into an XML file, will this affect the integrity of the ids coming from that table? My table looks like this <table name="entry"> <column name="id" type="INTEGER" primaryKey="true" autoIncrement="true" /> <column name="title" type="VARCHAR" size="500" required="true" /> </table> and I use it as a foreign key in other tables <table name="refer"> <column name="id" type="INTEGER" primaryKey="true" autoIncrement="true" /> <column name="linkto" type="INTEGER"/> <foreign-key foreignTable="entry"> <reference local="linkto" foreign="id" /> </foreign-key> </table> So I'm wondering if I remove that table out of the database, is there a way to retain that referential integrity? And of course are these any other efficient ways to do the same thing? I just don't want to have to repeat that table for several websites.

    Read the article

  • Apple file sharing: bind to a specific interface

    - by Cesar
    My customer have an office small office with just a wifi router. He use this router for internet connectivity and file transfer operations between the desktops. Recently the file transfer activity between desktop (all osx based) is increased a lot so he bought a switch (no connected to the router, too far away) for transfer the file over the cable instead over the wifi. Problem: How to bind the file sharing service just to the Ethernet interface and exclude the wifi interface ? (actually the service binds to the wifi automatically and there are no options about the interface binding)

    Read the article

  • EJB and JPA and @OneToMany - Transaction too long?

    - by marioErr
    Hello. I'm using EJB and JPA, and when I try to access PhoneNumber objects in phoneNumbers attribute of Contact contact, it sometimes take several minutes for it to actually return data. It just returns no phoneNumbers, not even null, and then, after some time, when i call it again, it magically appears. This is how I access data: for (Contact c : contactFacade.findAll()) { System.out.print(c.getName()+" "+c.getSurname()+" : "); for (PhoneNumber pn : c.getPhoneNumbers()) { System.out.print(pn.getNumber()+" ("+pn.getDescription()+"); "); } } I'm using facade session ejb generated by netbeans (basic CRUD methods). It always prints correct name and surname, phonenumbers and description are only printed after some time (it varies) from creating it via facade. I'm guessing it has something to do with transactions. How to solve this? These are my JPA entities: contact @Entity public class Contact implements Serializable { private static final long serialVersionUID = 1L; @Id @GeneratedValue(strategy = GenerationType.AUTO) private Long id; private String name; private String surname; @OneToMany(cascade = CascadeType.REMOVE, mappedBy = "contact") private Collection<PhoneNumber> phoneNumbers = new ArrayList<PhoneNumber>(); phonenumber @Entity public class PhoneNumber implements Serializable { private static final long serialVersionUID = 1L; @Id @GeneratedValue(strategy = GenerationType.AUTO) private Long id; private String number; private String description; @ManyToOne() @JoinColumn(name="CONTACT_ID") private Contact contact;

    Read the article

  • How to use a getter with a nullable?

    - by Desmond Lost
    I am reading a bunch of queries from a database. I had an issue with the queries not closing, so I added a CommandTimeout. Now, the individual queries read from the config file each time they are run. How would I make the code cache the int from the config file only once using a static nullable and getter. I was thinking of doing something along the lines of: static int? var; get{ var = null; if (var.HasValue) ...(i dont know how to complete the rest) My actual code: private object ExecuteQuery(string dbConnStr, bool fixIt) { object result = false; using (SqlConnection connection = new SqlConnection(dbConnStr)) { connection.Open(); using (SqlCommand sqlCmd = new SqlCommand()) { AddSQLParms(sqlCmd); sqlCmd.CommandTimeout = 30; sqlCmd.CommandText = _cmdText; sqlCmd.Connection = connection; sqlCmd.CommandType = System.Data.CommandType.Text; sqlCmd.ExecuteNonQuery(); } connection.Close(); } return result; }}

    Read the article

  • java - powermock whenNew doesnt seem to work, calls the actual constructor

    - by user1331243
    I have two final classes that are used in my unit test. I am trying to use whenNew on the constructor of a final class, but I see that it calls the actual constructor. The code is @PrepareForTest({A.class, B.class, Provider.class}) @Test public void testGetStatus() throws Exception { B b = mock(B.class); when(b.getStatus()).thenReturn(1); whenNew(B.class).withArguments(anyString()).thenReturn(b); Provider p = new Provider(); int val = p.getStatus(); assertTrue((val == 1)); } public class Provider { public int getStatus() { B b = new B("test"); return b.getStatus(); } } public final class A { private void init() { // ...do soemthing } private static A a; private A() { } public static A getInstance() { if (a == null) { a = new A(); a.init(); } return a; } } public final class B { public B() { } public B(String s) { this(A.getInstance(), s); } public B(A a, String s) { } public int getStatus() { return 0; } } On debug, I find that its the actual class B instance created and not the mock instance that is returned for new usage and assertion fails. Any pointers on how to get this working. Thanks

    Read the article

  • Rich Text Editor in Table view

    - by pubudu
    Im try to implement rich text editor in table view cell. before this i test rich text editor using web view.it work fine I want to put this web view inside my costume cell. i did it, but it not working (bold , italic ... styles) how can i pass stringByEvaluatingJavaScriptFromString:@"document.execCommand(\"Bold\") this command to webview in cell i did like this in viewContoller - (IBAction)clickbold:(id)sender { static NSString *CellIdentifier = @"Cell1"; Cell *cell = [_tableview dequeueReusableCellWithIdentifier:CellIdentifier]; cell = [_tableview cellForRowAtIndexPath:0]; [cell.webView stringByEvaluatingJavaScriptFromString:@"document.execCommand(\"Bold\")"]; [_tableview beginUpdates]; [_tableview endUpdates]; } - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell1"; Cell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; { NSBundle *bundle = [NSBundle mainBundle]; NSURL *indexFileURL = [bundle URLForResource:@"index" withExtension:@"html"]; [cell.tableview loadRequest:[NSURLRequest requestWithURL:indexFileURL]]; cell.webView.delegate = self; [cell.webView stringByEvaluatingJavaScriptFromString:@"document.execCommand(\"Italic\")"]; return cell; } return cell; } my html file like this <html> <head> <script> function myFunction() { window.location.href = "myclick://buttonClicked"; } function onKEYPRESS() { window.location.href = "onkeypress://buttonClicked"; } </script> </head> <body> <body> <div id="content" contenteditable="true" style="font-family:Arial" onfocus="myFunction()" onkeypress="onKEYPRESS()">TEXT TEXT </div> </body> </html>

    Read the article

  • Jboss 6 Cluster Singleton Clustered

    - by DanC
    I am trying to set up a Jboss 6 in a clustered environment, and use it to host clustered stateful singleton EJBs. So far we succesfully installed a Singleton EJB within the cluster, where different entrypoints to our application (through a website deployed on each node) point to a single environment on which the EJB is hosted (thus mantaining the state of static variables). We achieved this using the following configuration: Bean interface: @Remote public interface IUniverse { ... } Bean implementation: @Clustered @Stateful public class Universe implements IUniverse { private static Vector<String> messages = new Vector<String>(); ... } jboss-beans.xml configuration: <deployment xmlns="urn:jboss:bean-deployer:2.0"> <!-- This bean is an example of a clustered singleton --> <bean name="Universe" class="Universe"> </bean> <bean name="UniverseController" class="org.jboss.ha.singleton.HASingletonController"> <property name="HAPartition"><inject bean="HAPartition"/></property> <property name="target"><inject bean="Universe"/></property> <property name="targetStartMethod">startSingleton</property> <property name="targetStopMethod">stopSingleton</property> </bean> </deployment> The main problem for this implementation is that, after the master node (the one that contains the state of the singleton EJB) shuts down gracefuly, the Singleton's state is lost and reset to default. Please note that everything was constructed following the JBoss 5 Clustering documents, as no JBoss 6 documents were found on this subject. Any information on how to solve this problem or where to find JBoss 6 documention on clustering is appreciated.

    Read the article

  • Recursion in prepared statements

    - by Rob
    I've been using PDO and preparing all my statements primarily for security reasons. However, I have a part of my code that does execute the same statement many times with different parameters, and I thought this would be where the prepared statements really shine. But they actually break the code... The basic logic of the code is this. function someFunction($something) { global $pdo; $array = array(); static $handle = null; if (!$handle) { $handle = $pdo->prepare("A STATEMENT WITH :a_param"); } $handle->bindValue(":a_param", $something); if ($handle->execute()) { while ($row = $handle->fetch()) { $array[] = someFunction($row['blah']); } } return $array; } It looked fine to me, but it was missing out a lot of rows. Eventually I realised that the statement handle was being changed (executed with different param), which means the call to fetch in the while loop will only ever work once, then the function calls itself again, and the result set is changed. So I am wondering what's the best way of using PDO prepared statements in a recursive way. One way could be to use fetchAll(), but it says in the manual that has a substantial overhead. The whole point of this is to make it more efficient. The other thing I could do is not reuse a static handle, and instead make a new one every time. I believe that since the query string is the same, internally the MySQL driver will be using a prepared statement anyway, so there is just the small overhead of creating a new handle on each recursive call. Personally I think that defeats the point. Or is there some way of rewriting this?

    Read the article

  • Where do I put javaassist code?

    - by DutrowLLC
    I have an application running on google app engine. I'm using restlets and I have a couple of layers set up including the restlet layer, the model layer, the business layer, and the data layer. I'm attempting to use javaassist to modify some classes, but I'm unsure where to actually put the code. I tried to put the code in the static initialization block: public class Person { String firstName; String getFirstName(){return null;} static{ ClassPool pool = ClassPool.getDefault(); try { CtClass CtPerson = pool.get("Person"); CtMethod CtGetFirstName = CtPerson.getDeclaredMethod("GetFirstName"); CtGetFirstName.setBody("return firstName;"); CtPerson.toClass(); } catch (Exception e) { e.printStackTrace(); } } } ...but that resulted in this error: javassist.CannotCompileException:.....attempted duplicate class definition...". I guess it makes sense that I can't edit the class file in the middle of its generation. I know the code works because I was able to run it correctly by simply putting it in a location that would run when I sent the program a command. (accessed a Restlet resource). The code ran fine if an instance of the class had not already been instantiated, however once I instantiated an instance of the affected class, the javaassist code failed. I assume I need to put this code somewhere that it will only run either: once after the program starts, directly before a class is instantiated for the first time, or even better, during compile time.

    Read the article

  • How can I improve the performance of this double-for print?

    - by Florenc
    I have the following static method that prints the data imported from a 40.000 lines .xls spreadsheet. Now, it takes about 27 seconds to print the data in the console and the memory consumption is huge. import org.apache.poi.hssf.usermodel.*; import org.apache.poi.ss.usermodel.*; public static void printSheetData(List<List<HSSFCell>> sheetData) { for (int i = 0; i < sheetData.size(); i++) { List<HSSFCell> list = (List<HSSFCell>) sheetData.get(i); for (int j = 0; j < list.size(); j++) { HSSFCell cell = (HSSFCell) list.get(j); System.out.print(cell.toString()); if (j < list.size() - 1) { System.out.print(", "); } } System.out.println(""); } } Disclaimer: I know, I know large data belong to a database, don't print output in the console, premature optimization is the root of all evils...

    Read the article

  • Generating a field setter and getter with ASM

    - by ng
    I would like to avoid reflection in an open source project I am developing. Here I have classes like the following. public class PurchaseOrder { @Property private Customer customer; @Property private String name; } I scan for the @Property annotation to determine what I can set and get from the PurchaseOrder reflectively. There are many such classes all using java.lang.reflect.Field.get() and java.lang.reflect.Field.set(). Ideally I would like to generate for each property an invoker like the following. public interface PropertyAccessor<S, V> { public void set(S source, V value); public V get(S source); } Now when I scan the class I can create a static inner class of PurchaseOrder like so. static class customer_Field implements PropertyAccessor<PurchaseOrder, Customer> { public void set(PurchaseOrder order, Customer customer) { order.customer = customer; } public Customer get(PurchaseOrder order) { return order.customer; } } With these I totally avoid the cost of reflection. I can now set and get from my instances with native performance. Can anyone tell me how I would do this. A code example would be great. I have searched the net for a good example but can find nothing like this. The ASM examples are pretty poor also. The key here is that I have an interface that I can pass around. So I can have various implementations, perhaps one with Java Reflection as a default, one with ASM, and maybe one with Javassist? Any help would be greatly appreciated.

    Read the article

  • Thread Safety of C# List<T> for readers

    - by ILIA BROUDNO
    I am planning to create the list once in a static constructor and then have multiple instances of that class read it (and enumerate through it) concurrently without doing any locking. In this article http://msdn.microsoft.com/en-us/library/6sh2ey19.aspx MS describes the issue of thread safety as follows: Public static (Shared in Visual Basic) members of this type are thread safe. Any instance members are not guaranteed to be thread safe. A List can support multiple readers concurrently, as long as the collection is not modified. Enumerating through a collection is intrinsically not a thread-safe procedure. In the rare case where an enumeration contends with one or more write accesses, the only way to ensure thread safety is to lock the collection during the entire enumeration. To allow the collection to be accessed by multiple threads for reading and writing, you must implement your own synchronization. The "Enumerating through a collection is intrinsically not a thread-safe procedure." Statement is what worries me. Does this mean that it is thread safe for readers only scenario, but as long as you do not use enumeration? Or is it safe for my scenario?

    Read the article

  • PHP cURL error: "Empty reply from server"

    - by ABach
    All, I have a class function to interface with the RESTful API for Last.FM - its purpose is to grab the most recent tracks for my user. Here it is: private static $base_url = 'http://ws.audioscrobbler.com/2.0/'; public static function getTopTracks($options = array()) { $options = array_merge(array( 'user' => 'bachya', 'period' => NULL, 'api_key' => 'xxxxx...', // obfuscated, obviously ), $options); $options['method'] = 'user.getTopTracks'; // Initialize cURL request and set parameters $ch = curl_init(); curl_setopt_array($ch, array( CURLOPT_URL => self::$base_url, CURLOPT_POST => TRUE, CURLOPT_POSTFIELDS => $options, CURLOPT_RETURNTRANSFER => TRUE, CURLOPT_TIMEOUT => 30, CURLOPT_USERAGENT => 'Mozilla/4.0 (compatible; MSIE 5.01; Windows NT 5.0)' )); $results = curl_exec($ch); return $results; } This returns "Empty reply from server". I know that some have suggested that this error comes from some fault in network infrastructure; I do not believe this to be true in my case. If I run a cURL request through the command line, I get my data; the Last.FM service is up and accessible. Before I go to those folks and see if anything has changed, I wanted to check with you fine folks and see if there's some issue in my code that would be causing this. Thanks!

    Read the article

  • .Net lambda expression-- where did this parameter come from?

    - by larryq
    I'm a lambda newbie, so if I'm missing vital information in my description please tell me. I'll keep the example as simple as possible. I'm going over someone else's code and they have one class inheriting from another. Here's the derived class first, along with the lambda expression I'm having trouble understanding: class SampleViewModel : ViewModelBase { private ICustomerStorage storage = ModelFactory<ICustomerStorage>.Create(); public ICustomer CurrentCustomer { get { return (ICustomer)GetValue(CurrentCustomerProperty); } set { SetValue(CurrentCustomerProperty, value); } } private int quantitySaved; public int QuantitySaved { get { return quantitySaved; } set { if (quantitySaved != value) { quantitySaved = value; NotifyPropertyChanged(p => QuantitySaved); //where does 'p' come from? } } } public static readonly DependencyProperty CurrentCustomerProperty; static SampleViewModel() { CurrentCustomerProperty = DependencyProperty.Register("CurrentCustomer", typeof(ICustomer), typeof(SampleViewModel), new UIPropertyMetadata(ModelFactory<ICustomer>.Create())); } //more method definitions follow.. Note the call to NotifyPropertyChanged(p => QuantitySaved) bit above. I don't understand where the "p" is coming from. Here's the base class: public abstract class ViewModelBase : DependencyObject, INotifyPropertyChanged, IXtremeMvvmViewModel { public event PropertyChangedEventHandler PropertyChanged; protected virtual void NotifyPropertyChanged<T>(Expression<Func<ViewModelBase, T>> property) { MvvmHelper.NotifyPropertyChanged(property, PropertyChanged); } } There's a lot in there that's not germane to the question I'm sure, but I wanted to err on the side of inclusiveness. The problem is, I don't understand where the 'p' parameter is coming from, and how the compiler knows to (evidently?) fill in a type value of ViewModelBase from thin air? For fun I changed the code from 'p' to 'this', since SampleViewModel inherits from ViewModelBase, but I was met with a series of compiler errors, the first one of which statedInvalid expression term '=>' This confused me a bit since I thought that would work. Can anyone explain what's happening here?

    Read the article

< Previous Page | 361 362 363 364 365 366 367 368 369 370 371 372  | Next Page >