Search Results

Search found 10344 results on 414 pages for 'mac mini'.

Page 367/414 | < Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >

• Ubuntu systematically losing wired connection

  - by Lukasz Baczynski

  I'm working on 11.10 for few recent days, everything was working perfect until today. Updated ubuntu (some certs were updates as far as i remember) and from this time, wired network stops working randomly and systematically. (All other pcs/macs work fine) From 192.168.0.9 icmp_seq=25 Destination Host Unreachable From 192.168.0.9 icmp_seq=26 Destination Host Unreachable From 192.168.0.9 icmp_seq=27 Destination Host Unreachable From 192.168.0.9 icmp_seq=28 Destination Host Unreachable From 192.168.0.9 icmp_seq=29 Destination Host Unreachable From 192.168.0.9 icmp_seq=30 Destination Host Unreachable From 192.168.0.9 icmp_seq=31 Destination Host Unreachable 64 bytes from 192.168.0.1: icmp_req=32 ttl=64 time=1003 ms 64 bytes from 192.168.0.1: icmp_req=33 ttl=64 time=0.496 ms 64 bytes from 192.168.0.1: icmp_req=34 ttl=64 time=0.576 ms 64 bytes from 192.168.0.1: icmp_req=35 ttl=64 time=0.522 ms 64 bytes from 192.168.0.1: icmp_req=36 ttl=64 time=0.624 ms 64 bytes from 192.168.0.1: icmp_req=37 ttl=64 time=0.625 ms 64 bytes from 192.168.0.1: icmp_req=38 ttl=64 time=0.555 ms It'll work for 20 seconds then it'll stop working for 10-30sec and so on. I've tried setting my router to give static IPs, it doesn't help. NOTHING has been changed since yesterday beside the package update... Here are other settings that may be useful: baka@baka-PC:~/Private/projects/wduk$ lspci -nnk | grep -iA2 net 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) Subsystem: ASUSTeK Computer Inc. P8P67 and other motherboards [1043:8432] Kernel driver in use: r8169 baka@baka-PC:~/Private/projects/wduk$ ifconfig -a eth0 Link encap:Ethernet HWaddr **Removed MAC address** inet addr:192.168.0.9 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::ca60:ff:fe0a:85b2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6400 errors:0 dropped:6400 overruns:0 frame:6400 TX packets:7085 errors:0 dropped:107 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:4191983 (4.1 MB) TX bytes:886881 (886.8 KB) Interrupt:72 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:2522 errors:0 dropped:0 overruns:0 frame:0 TX packets:2522 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1070130 (1.0 MB) TX bytes:1070130 (1.0 MB) baka@baka-PC:~/Private/projects/wduk$ cat /etc/resolv.conf # Generated by NetworkManager nameserver 8.8.8.8 thanks for help

  Read the article

• KVM Bridged Network Not Working

  - by EApubs

  I just installed KVM on my Ubuntu Server according to this guide : https://help.ubuntu.com/community/KVM/Installation Then prepared a bridged network as shown in here : https://help.ubuntu.com/community/KVM/Networking Then, I created a virtual machine with virt-manager. I tried several times but the guest fails to connect to the network! Any help? ifconfig : br0 Link encap:Ethernet HWaddr d0:27:88:b0:e4:38 inet addr:192.168.20.100 Bcast:192.168.20.255 Mask:255.255.255.0 inet6 addr: fe80::d227:88ff:feb0:e438/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:62 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:10493 (10.4 KB) TX bytes:8433 (8.4 KB) eth0 Link encap:Ethernet HWaddr d0:27:88:b0:e4:38 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:62 errors:0 dropped:0 overruns:0 frame:0 TX packets:63 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11361 (11.3 KB) TX bytes:8479 (8.4 KB) Interrupt:41 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) virbr0 Link encap:Ethernet HWaddr 5a:8c:57:95:af:3b inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) brctl show : bridge name bridge id STP enabled interfaces br0 8000.d02788b0e438 no eth0 virbr0 8000.000000000000 yes brctl showmacs br0 : port no mac addr is local? ageing timer 1 5c:d9:98:67:b6:28 no 48.33 1 d0:27:88:b0:e4:38 yes 0.00 1 e0:2a:82:f9:6c:09 no 0.00 ip route : default via 192.168.20.1 dev br0 metric 100 192.168.20.0/24 dev br0 proto kernel scope link src 192.168.20.100 192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1 *In the guest * I was unable to copy paste the info from the guest because can't ssh to it. It didn't get any ip from DHCP. Won't work even after setting it up manually.

  Read the article

• A Facelift for Fusion

  - by Richard Lefebvre

  It's simple. It's modern. It was the buzz at OpenWorld in San Francisco. See what the UX team has been up to and what customers are going to love. At OpenWorld 2012, the Oracle Applications User Experience (UX) team unveiled the new face of Fusion Applications. You might have seen it in sessions presented by Chris Leone, Anthony Lye, Jeremy Ashley and others or you may have gotten a look on the demogrounds. Why are we delivering a new face for Fusion Applications? "Because," says Ashley, vice president of the Oracle Applications User Experience team, "we want to provide a simple, modern, productive way for users to complete their top quick-entry tasks. The idea is to provide a clear, productive user experience that is backed by the full functionality of Fusion Applications." The first release of the new face of Fusion focuses on three types of users. It provides a fully functional gateway to Fusion Applications for: ·         New and casual users who need quick access to self-service tasks ·         Professional users who need fast access to quick-entry, high-volume tasks ·         Users who are looking for a way to quickly brand their portal for employees The new face of Fusion allows users to move easily from navigation to action, Ashley said, and it has been designed for any device -- Mac, PC, iPad, Android, SmartBoard -- in the browser. How Did We Build It? The new face of Fusion essentially is a custom shell, developed by the Apps UX team, and a set of page templates that embodies a simple design aesthetic. It's repeatable, providing consistency across its pages, and the need for training is little to zero. More specifically, the new face of Fusion has been built on ADF. The Applications UX team created pages in JDeveloper using local tasks flows bound to existing view objects. Three new components were commissioned from ADF and existing Fusion components were re-skinned to deliver a simple, modern user experience. It really is that simple - and to prove that point, we've been sharing our new face of Fusion story on several Oracle channels such as this one. If you want to learn more, check OpenWorld presentation on the Fusion Learning Center.

  Read the article

• Why is it necessary to install EFI/rEFInd/UEFI/... on a SD Card since the Macbook Pro seems to already have it?

  - by user170794

  Dear askubuntu members, I own a Macbook Pro (late 2009) and when I boot the laptop and hold the alt key meanwhile, there is a EFI screen, so EFI is installed on... the firmware? I had a few troubles with my hard disk, so I had to change it, but I haven't installed OS X, I have only installed Ubuntu and still the EFI screen is there which is surely a good thing. As the new hard disk is making troubles again, I am using Puppy Linux, booting from a CD each time, which is unconfortable. So I am trying to have Ubuntu installed on a SD Card. After having spent many months on the internet grabing informations anywhere I can and trying several things, I applied this method: http://www.weihermueller.de/mac/ I succeeded in making one SD Card recognizable by the EFI of my laptop (holding alt key @ boot), but nothing installed on it yet as I fear to lose the recognizable-by-EFI part. I haven't succeded in producing the same result on another SD Card. I have a bootable USB key of Ubuntu (yipee) which works like a live CD, made with the help of Universal Linux UDF Creator, found there: http://www.pendrivelinux.com/universal-usb-installer-easy-as-1-2-3/ on which I have put Ubuntu 13.04 64bit, retrieved from the official deposits. Eventhough I have to add the "nouveau.noaccel=1" option to the grub command line launching Linux, it works (yipee again) properly as a live cd. When installing Ubuntu I come across the "where do I wanna put Ubuntu" window, I partition another SD Card in: the EFI part (40MB) the Linux part (15GB< <16GB) The installation works fine and finishes with no problem. But at the reboot, the SD Card where Linux is installed is not recognized by the EFI, the icons are : the CD (Puppy Linux), the USB stick (from Linux UDF Creator), the hard drive (the formerly-working Ubuntu 12) but no fourth icon of the SD Card whatsoever. As the title of this thread suggests, I am wondering: why there is a need for EFI to be installed on the SD Card since EFI seems to be on my laptop anyway? why EFI has to be on a different partition than the Linux's one? How do both parts communicate? why the EFI part on the SD Card made with the help of the live-USB key isn't recognized? on the EFI partition, there is a folder named "EFI" which contains another folder named "ubuntu" which contains a file named "grubx64.efi", why is there a thing called grub? Is it the Linux's grub where one can chose either to boot, to boot in safe mode, etc.? Thank you for your patience, looking forward for any kind of answer, Julien

  Read the article

• Career Development: What should I learn next after Python? and Why? [closed]

  - by Josh

  Hi all I'm currently learning Python. I want to know what should I learn next out of these programming langauages: PHP Actionscript 3 Objective-C (iPhone applications) I work in the Multimedia industry and have decided to learn Python as a first programming language seriously because I would like to learn the basics of programming, to mainly write scripts at work that Automate task (eg. Edit multiple XML files quickly) At work we have a senior developer who knows Actionscript and PHP very well (although knows PHP better). We also have been developing iPhone applications for 2 weeks, Our senior developer could learn it although we have lots of work currently with PHP and Actionscript 3 type work and haven't had time or reason to pick up iOS development. Here are the reasons I want to learn each language, But I cannot decide what I'll learn next: PHP: I want to learn PHP because it will help with Web Development. PHP is very wanted by employers. Senior developer at work writes everything in it web sites, CMS etc. (including XML checks and scripts), I will learn a lot from him (once I learn the basics). However, I don't want to learn Web because you have to deal with lots of cross-browser problems. Actionscript 3: At work we are looking to put on another developer to help with online activities and very small games (using Actionscript 3.0 and Flash CS5) for (eg. First Aid Activities etc) I would like to do things that have a element of design as I'm better at Photoshop then developing. I want to be creative, I like to interact with users in a fun way. Objective-C (iPhone applications): We are a all mac office, we may get more iPhone, iPad application work(jobs) that need to be created. Work has found it nearly impossible to find good iPhone developers. I like apple products (Macs and iPhones), I would like to make my own games, applications in my spare time(if I knew how). Should I learn Actionscript first because it would be easier to learn then Objective-C? Should I learn PHP because it is very widely used? Should I learn Objective-C because it is really wanted by employers now?

  Read the article

• How can a solo programmer become a good team player?

  - by Nick

  I've been programming (obsessively) since I was 12. I am fairly knowledgeable across the spectrum of languages out there, from assembly, to C++, to Javascript, to Haskell, Lisp, and Qi. But all of my projects have been by myself. I got my degree in chemical engineering, not CS or computer engineering, but for the first time this fall I'll be working on a large programming project with other people, and I have no clue how to prepare. I've been using Windows all of my life, but this project is going to be very unix-y, so I purchased a Mac recently in the hopes of familiarizing myself with the environment. I was fortunate to participate in a hackathon with some friends this past year -- both CS majors -- and excitingly enough, we won. But I realized as I worked with them that their workflow was very different from mine. They used Git for version control. I had never used it at the time, but I've since learned all that I can about it. They also used a lot of frameworks and libraries. I had to learn what Rails was pretty much overnight for the hackathon (on the other hand, they didn't know what lexical scoping or closures were). All of our code worked well, but they didn't understand mine, and I didn't understand theirs. I hear references to things that real programmers do on a daily basis -- unit testing, code reviews, but I only have the vaguest sense of what these are. I normally don't have many bugs in my little projects, so I have never needed a bug tracking system or tests for them. And the last thing is that it takes me a long time to understand other people's code. Variable naming conventions (that vary with each new language) are difficult (__mzkwpSomRidicAbbrev), and I find the loose coupling difficult. That's not to say I don't loosely couple things -- I think I'm quite good at it for my own work, but when I download something like the Linux kernel or the Chromium source code to look at it, I spend hours trying to figure out how all of these oddly named directories and files connect. It's a programming sin to reinvent the wheel, but I often find it's just quicker to write up the functionality myself than to spend hours dissecting some library. Obviously, people who do this for a living don't have these problems, and I'll need to get to that point myself. Question: What are some steps that I can take to begin "integrating" with everyone else? Thanks!

  Read the article

• Thoughts on home NAS server

  - by user826955

  I currently have a NAS with a 2x2TB HDD 1x16GB SSD layout on a mini-itx atom board. The NAS is in a Lian Li PC-Q07 case. On this system I was running freebsd 8 with a gmirror raid 1 setup, which was enough for my needs. So far I was using the NAS for: Fileserver with AFP protocol (only mac clients used) SVN server hosting all my source trees of my projects JIRA (performance was okay-ish) Timemachine backup for the macs The power consumption was about 38W, although I did not put HDDs asleep when unused (I think this is not possible in a raid setup). I liked the NAS because: the performance was good through gigabit LAN (enough for my needs) power consumption was good its a pretty small case and fits in one of my cupboards I disliked the NAS a bit because: it was a bit noisy, the Q07 case vibrated a good amount because of the HDDs. I switched the NAS off every evening I do not have a real backup of the data on the NAS, only the internal raid 1 as safety. I really dont want to loose my source trees under no circumstances, so I would really be sleeping better if I knew I had regular backups somewhere. Recently, the board seemed to have died, I can't boot anymore. Thus, I was thinking about a redesign of my NAS (I still have to find out what parts are broken, I probably need to replace the mainboard and SSD. HDDs seem to be okay). First of all, I was wondering what other users have as backup for their NAS? Are you actually using a second NAS, and regularly copying over the data to have it safe? Or is there any better solution to this? I was thinking about getting a cheap NAS like the synology DS112j with only one disk, and use rsync or something similar to regularly copy data over to the second NAS (wake the second NAS upon start, shut it down after copy). Although this approach seems somewhat weird, It would have the benefit (?) that I could use a single disk instead of raid in the main NAS, and put the disk asleep when idle, and have the NAS running 24/7 with low energy consumption (I found no way to do this with a gmirror setup). Is there any recommended backup solution for a small NAS? Then I was thinking about a different raid setup. Since I have to buy a new mainboard as well as SSD, I might as well switch over to a i3 board with more ram, and also switch to ZFS. I am not familar with ZFS, I've never used it, but I read and hear much about it. Would it be viable to set up a ZFS storage with only 2 disks? Can I easily extend this storage with more disks, once I choose to add some? I could maybe get a new case like the Fractal Design Array R2 which has more 3,5" slots. I could as well get another 2 disks, but I would prefer sticking with the existing 2 for enegery/heat/noise reasons. Should I go for a ZFS storage or stick to my gmirror setup? I would also like to keep freebsd as operating system, and also I dont need any web gui or something (that is, I dont need/want to use FreeNAS or Openfiler etc). Does anyone maybe have a sample setup in use so I can compare energy consumption/noise/software setup? Any guidance towards the NAS of my dreams (silent, low energy, safe w/ backups) much appreciated.

  Read the article

• C# Dev - I've tried Lisps, but I don't get it.

  - by Jonathan Mitchem

  After a few months of learning about and playing with lisps, both CL and a bit of Clojure, I'm still not seeing a compelling reason to write anything in it instead of C#. I would really like some compelling reasons, or for someone to point out that I'm missing something really big. The strengths of a Lisp (per my research): Compact, expressive notation - More so than C#, yes... but I seem to be able to express those ideas in C# too. Implicit support for functional programming - C# with LINQ extension methods: mapcar = .Select( lambda ) mapcan = .Select( lambda ).Aggregate( (a,b) = a.Union(b) ) car/first = .First() cdr/rest = .Skip(1) .... etc. Lambda and higher-order function support - C# has this, and the syntax is arguably simpler: "(lambda (x) ( body ))" versus "x = ( body )" "#(" with "%", "%1", "%2" is nice in Clojure Method dispatch separated from the objects - C# has this through extension methods Multimethod dispatch - C# does not have this natively, but I could implement it as a function call in a few hours Code is Data (and Macros) - Maybe I haven't "gotten" macros, but I haven't seen a single example where the idea of a macro couldn't be implemented as a function; it doesn't change the "language", but I'm not sure that's a strength DSLs - Can only do it through function composition... but it works Untyped "exploratory" programming - for structs/classes, C#'s autoproperties and "object" work quite well, and you can easily escalate into stronger typing as you go along Runs on non-Windows hardware - Yeah, so? Outside of college, I've only known one person who doesn't run Windows at home, or at least a VM of Windows on *nix/Mac. (Then again, maybe this is more important than I thought and I've just been brainwashed...) The REPL for bottom-up design - Ok, I admit this is really really nice, and I miss it in C#. Things I'm missing in a Lisp (due to a mix of C#, .NET, Visual Studio, Resharper): Namespaces. Even with static methods, I like to tie them to a "class" to categorize their context (Clojure seems to have this, CL doesn't seem to.) Great compile and design-time support the type system allows me to determine "correctness" of the datastructures I pass around anything misspelled is underlined realtime; I don't have to wait until runtime to know code improvements (such as using an FP approach instead of an imperative one) are autosuggested GUI development tools: WinForms and WPF (I know Clojure has access to the Java GUI libraries, but they're entirely foreign to me.) GUI Debugging tools: breakpoints, step-in, step-over, value inspectors (text, xml, custom), watches, debug-by-thread, conditional breakpoints, call-stack window with the ability to jump to the code at any level in the stack (To be fair, my stint with Emacs+Slime seemed to provide some of this, but I'm partial to the VS GUI-driven approach) I really like the hype surrounding Lisps and I gave it a chance. But is there anything I can do in a Lisp that I can't do as well in C#? It might be a bit more verbose in C#, but I also have autocomplete. What am I missing? Why should I use Clojure/CL?

  Read the article

• Windows 8 and the future of Silverlight

  - by Laila

  After Steve Ballmer's indiscrete 'MisSpeak' about Windows 8, there has been a lot of speculation about the new operating system. We've now had a few glimpses, such as the demonstration of 'Mosh' at the D9 2011 conference, and the Youtube video, which showed a touch-centric new interface for apps built using HTML5 and JavaScript. This has caused acute anxiety to the programmers who have followed the recommended route of WPF, Silverlight and .NET, but it need not have caused quite so much panic since it was, in fact, just a thin layer to make Windows into an apparently mobile-friendly OS. More worryingly, the press-release from Microsoft was at pains to say that 'Windows 8 apps use the power of HTML5, tapping into the native capabilities of Windows using standard JavaScript and HTML', as if all thought of Silverlight, dominant in WP7, had been jettisoned. Ironically, this brave new 'happening' platform can all be done now in Windows 7 and an iPad, using Adobe Air, so it is hardly cutting-edge; in fact the tile interface had a sort of Retro-Zune Metro UI feel first seen in Media Centre, followed by Windows Phone 7, with any originality leached out of it by the corporate decision-making process. It was kinda weird seeing old Excel running alongside stodgily away amongst all the extreme paragliding videos. The ability to snap and resize concurrent apps might be a novelty on a tablet, but it is hardly so on a PC. It was at that moment that it struck me that here was a spreadsheet application that hadn't even made the leap to the .NET platform. Windows was once again trying to be all things to all men, whereas Apple had carefully separated Mac OS X development from iOS. The acrobatic feat of straddling all mobile and desktop devices with one OS is looking increasingly implausible. There is a world of difference between an operating system that facilitates business procedures and a one that drives a device for playing pop videos and your holiday photos. So where does this leave Silverlight? Pretty much where it was. Windows 8 will support it, and it will continue to be developed, but if these press-releases reflect the thinking within Microsoft, it is no longer seen as the strategic direction. However, Silverlight is still there and there will be a whole new set of developer APIs for building touch-centric apps. Jupiter, for example, is rumoured to involve an App store that provides new, Silverlight based "immersive" applications that are deployed as AppX packages. When the smoke clears, one suspects that the Javascript/HTML5 is merely an alternative development environment for Windows 8 to attract the legions of independent developers outside the .NET culture who are unlikely to ever take a shine to a more serious development environment such as WPF or Silverlight. Cheers, Laila

  Read the article

• Wrapping REST based Web Service

  - by PaulPerry

  I am designing a system that will be running online under Microsoft Windows Azure. One component is a REST based web service which will really be a wrapper (using proxy pattern) which calls the REST web services of a business partner, which has to do with BLOB storage (note: we are not using azure storage). The majority of the functionality will be taking a request, calling our partner web service, receiving the request and then passing that back to the client. There are a number of reasons for doing this, but one of the big ones is that we are going to support three clients: our desktop application (win and mac), mobile apps (iOS), and a web front end. Having a single API which we then send to our partner protects us if that partner ever changes. I want our service to support both JSON and XML for the data transfer format, JSON for web and probably XML for the desktop and mobile (we already have an XML parser in those products). Our partner also supports both of these formats. I was planning on using ASP.NET MVC 4 with the Web API. As I design this, the thing that concerns me is the static type checking of C#. What if the partner adds or removes elements from the data? We can probably defensively code for that, but I still feel some concern. Also, we have to do a fair amount of tedious coding, to setup our API and then to turn around and call our partner’s API. There probably is not much choice on it though. But, in the back of my mind I wonder if maybe a more dynamic language would be a better choice. I want to reach out and see if anybody has had to do this before, what technology solutions they have used to (I am not attached to this one, these days Azure can host other technologies), and if anybody who has done something like this can point out any issues that came up. Thanks! Researching the issue seems to only find solutions which focus on connecting a SOAP web service over a proxy server, and not what I am referring to here. Note: Cross posted (by suggestion) from http://stackoverflow.com/questions/11906802/wrapping-rest-based-web-service Thank you!

  Read the article

• How to become a good team player?

  - by Nick

  I've been programming (obsessively) since I was 12. I am fairly knowledgeable across the spectrum of languages out there, from assembly, to C++, to Javascript, to Haskell, Lisp, and Qi. But all of my projects have been by myself. I got my degree in chemical engineering, not CS or computer engineering, but for the first time this fall I'll be working on a large programming project with other people, and I have no clue how to prepare. I've been using Windows all of my life, but this project is going to be very unix-y, so I purchased a Mac recently in the hopes of familiarizing myself with the environment. I was fortunate to participate in a hackathon with some friends this past year -- both CS majors -- and excitingly enough, we won. But I realized as I worked with them that their workflow was very different from mine. They used Git for version control. I had never used it at the time, but I've since learned all that I can about it. They also used a lot of frameworks and libraries. I had to learn what Rails was pretty much overnight for the hackathon (on the other hand, they didn't know what lexical scoping or closures were). All of our code worked well, but they didn't understand mine, and I didn't understand theirs. I hear references to things that real programmers do on a daily basis -- unit testing, code reviews, but I only have the vaguest sense of what these are. I normally don't have many bugs in my little projects, so I have never needed a bug tracking system or tests for them. And the last thing is that it takes me a long time to understand other people's code. Variable naming conventions (that vary with each new language) are difficult (__mzkwpSomRidicAbbrev), and I find the loose coupling difficult. That's not to say I don't loosely couple things -- I think I'm quite good at it for my own work, but when I download something like the Linux kernel or the Chromium source code to look at it, I spend hours trying to figure out how all of these oddly named directories and files connect. It's a programming sin to reinvent the wheel, but I often find it's just quicker to write up the functionality myself than to spend hours dissecting some library. Obviously, people who do this for a living don't have these problems, and I'll need to get to that point myself. Question: What are some steps that I can take to begin "integrating" with everyone else? Thanks!

  Read the article

• Why would more CPU cores on virtual machine slow compile times?

  - by Sid

  [edit#2] If anyone from VMWare can hit me up with a copy of VMWare Fusion, I'd be more than happy to do the same as a VirtualBox vs VMWare comparison. Somehow I suspect the VMWare hypervisor will be better tuned for hyperthreading (see my answer too) I'm seeing something curious. As I increase the number of cores on my Windows 7 x64 virtual machine, the overall compile time increases instead of decreasing. Compiling is usually very well suited for parallel processing as in the middle part (post dependency mapping) you can simply call a compiler instance on each of your .c/.cpp/.cs/whatever file to build partial objects for the linker to take over. So I would have imagined that compiling would actually scale very well with # of cores. But what I'm seeing is: 8 cores: 1.89 sec 4 cores: 1.33 sec 2 cores: 1.24 sec 1 core: 1.15 sec Is this simply a design artifact due to a particular vendor's hypervisor implementation (type2:virtualbox in my case) or something more pervasive across more VMs to make hypervisor implementations more simpler? With so many factors, I seem to be able to make arguments both for and against this behavior - so if someone knows more about this than me, I'd be curious to read your answer. Thanks Sid [edit:addressing comments] @MartinBeckett: Cold compiles were discarded. @MonsterTruck: Couldn't find an opensource project to compile directly. Would be great but can't screwup my dev env right now. @Mr Lister, @philosodad: Have 8 hw threads, using VirtualBox, so should be 1:1 mapping without emulation @Thorbjorn: I have 6.5GB for the VM and a smallish VS2012 project - it's quite unlikely that I'm swapping in/out trashing the page file. @All: If someone can point to an open source VS2010/VS2012 project, that might be a better community reference than my (proprietary) VS2012 project. Orchard and DNN seem to need environment tweaking to compile in VS2012. I really would like to see if someone with VMWare Fusion also sees this (for VMWare vs VirtualBox compartmentalization) Test details: Hardware: Macbook Pro Retina CPU : Core i7 @ 2.3Ghz (quad core, hyper threaded = 8 cores in windows task manager) Memory : 16 GB Disk : 256GB SSD Host OS: Mac OS X 10.8 VM type: VirtualBox 4.1.18 (type 2 hypervisor) Guest OS: Windows 7 x64 SP1 Compiler: VS2012 compiling a solution with 3 C# Azure projects Compile times measure by VS2012 plugin called 'VSCommands' All tests run 5 times, first 2 runs discarded, last 3 averaged

  Read the article

• How to troubleshoot ethernet port on laptop

  - by Psallas Vassilios

  I have a problem with my wired connection. To be more specific, my laptop doesn't seems to recognize that I have plugged in an ethernet cable. I tried to download new drivers for my ethernet card, but I couldn't find any solutions. Maybe because I am new to Linux, so I'm not familiar with running commands in the terminal. OK I have typed the command and here are the results: 00:04.0 Ethernet controller [0200]: Silicon Integrated Systems [SiS] 191 Gigabit Ethernet Adapter [1039:0191] (rev 02) For the second reply I don't know if the following is what you asked me: ?Memory: 3.9 GiB ?Processor: Intel Core 2 Duo CPU P8800 @ 2.66GHz × 2 ?OS type: 32-bit My Ethernet connection had some problem on Windows too. I have changed recently my internet provider, and since then my ethernet cable is not recognized by the laptop. At that time I was still on Windows. I thought that with Ubuntu the problem would be solved, but unfortunately the problem still persists. If someone can help me to solve my problem I'll be thankful. Here are the results of the three first commands you told me to run: lsmod | grep sis190 sis190 22570 0 sudo modprobe sis190 ifconfig eth0 Link encap:Ethernet HWaddr 00:90:f5:90:81:7e UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:185 errors:0 dropped:0 overruns:0 frame:0 TX packets:185 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22672 (22.6 KB) TX bytes:22672 (22.6 KB) wlan0 Link encap:Ethernet HWaddr 00:25:d3:2c:3a:ae inet addr:192.168.1.72 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::225:d3ff:fe2c:3aae/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:260 errors:0 dropped:0 overruns:0 frame:0 TX packets:363 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:71992 (71.9 KB) TX bytes:52000 (52.0 KB) and the results of running the last two commands: dmesg | grep -e eth -e sis190 [ 0.816667] sis190: sis190 Gigabit Ethernet driver 1.4 loaded [ 0.816728] sis190 0000:00:04.0: setting latency timer to 64 [ 0.816751] sis190: 0000:00:04.0: Read MAC address from EEPROM [ 0.904032] sis190: 0000:00:04.0: Realtek PHY RTL8201 transceiver at address [ 1.416030] sis190: 0000:00:04.0: Using transceiver at address 1 as default [ 1.448235] sis190 0000:00:04.0: eth0: 0000:00:04.0: SiS 191 PCI Gigabit Ethernet adapter at f8410000 (IRQ: 19), 00:90:f5:90:81:7e [ 1.448238] sis190 0000:00:04.0: eth0: GMII mode. [ 1.448243] sis190 0000:00:04.0: eth0: Enabling Auto-negotiation [ 11.560907] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372019] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 16.372265] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 26.424038] sis190 0000:00:04.0: eth0: auto-negotiating... nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: sis190 State: unavailable Default: no HW Address: 00:90:F5:90:81:7E Capabilities: Carrier Detect: yes Wired Properties Carrier: off

  Read the article

• Which programming language to get into?

  - by user602479

  I'm ending my third term in a few weeks so I have some spare time coming up. I'd like to spend it seriously digging into programming. My problem: I'm not sure which language to begin with. Just to be clear, I don't want to start a language-y-compared-to-language-z discussion. There are a some other issues that play a major role. In my 5th term I'm going to be participating in a major practical course which will include either Java or C programming. It will take a lot of time and energy, as I found out while talking to a few students who passed the final exams (only 15% pass on their first try). Which practical course I will take is randomly decided. My skills so far are the absolute basics of Java and C programming. I know the different data types and how to handle them, objects, pointers, thread programming, etc. All of that is on a very low level, though. My question now is, what language should I start seriously practicing? Java: I did my first GUIs with this language. I'm familiar with Eclipse but I need a project to work on (which I don't have) to really keep me pushing. Besides that, I don't think it would help me if I have to do C in a year. C: As with Java, I can't think of a personal project to keep me working and keep me interested in programming. If I get assigned to Java in a year, this wouldn't give me any advantages either, would it? (No objects, etc.) Objective-C: I recently came up with this idea. I have a Mac; I'm not really familiar with Xcode but I have one or two personal projects I'd like to work on. Further, I would be working with objects (as in Java) and C language constructs which would both be great for this practical course in a year. What do you think I should begin with? Should I just stick to Java and hope for the best, force myself through C or start (nearly) completely from the beginning with Objective C? Maybe you folks could give me some good advice that would stop me from switching from one language to the next?

  Read the article

• Unable to ping inside or outside network with default gateway 0.0.0.0

  - by agentroadkill

  I've been around here before and I could usually piece together everything to more or less get myself up and running, but this time I'm truly stumped. I'm trying to connect my new 14.04 install to a network, and I'm forced to be behind my college's router. Now I've tested the vary cable that is right now plugged into my Ubuntu box on a Windows, Mac OS X, and even my friend's Ubuntu 14.04 box, and they all connect no problem. I've been trying to track this down for about two days, but every time I get close to it, the bug jumps to some other piece of my connection. Anyway, as it sits ifconfig -a gives: eth2 Lninkencap:Ethernet HWaddr:00:1f:bc:08:31:1d inet addr:10.32.51.51 Bcast:10.32.51.155 Mask: 255.255.255.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 RX bytes:0 TX bytes:0 as well as the local loopback, but I'm assuming that is not an issue here. sudo dhclient -v eth2 returns: Listening on LPF/<hardware address of my integrated NIC, above> Sending on <same> Sending on Socket/fallback DHCPREQUEST of 10.32.51.51 on eth2 to 255.255.255.255 port 67 (xid=0x6f4a66ba) <two more lines of same> DHCPDISCOVER on eth2 to 255.255.255.255 port 67 interval 3 (xid=0x156f9fb4) <many more of above with varying intervals> No DHCPOFFERS received. Trying recorded lease 10.32.51.51 RTNETLINK answers: File exists bound: renewal in <large number> seconds If I then try ping 8.8.8.8, I get: connect: Network is unreachable /etc/resolv.conf only contains the two lines telling you not to edit it, while /etc/network/interfaces only has the loopback interface block in it. I've tried commenting out the "option rfc3442" line in /etc/dhcp/dhclient.conf which seemed to fix this issue for many people, as well as adding the line send vendor-class-indentifier "MSFT5.0" to dhclient.conf as well to tell the router I'm a windows box, in case they don't like Linux. Finally, route -n reveals: Destination Gateway Genmask Flags Metric Ref Use Iface 10.32.51.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 I would like to apologize in advance for the doubtless butchered text alignment, but I'm obviously typing this all by hand, reading from the terminal as I type commands. I'm hoping this is an interesting problem, and not something I blithely stumbled past in my (apparent) over-confidence. TIA! Quick addendum before posting: The activity light on the ethernet port are lit and one blinks during boot, but they rarely (and seemingly randomly) do so afterwards (both are dark) even while running dhclient in the foreground. When I had the Ubuntu box tethered to my MacBook earlier, I got what looked like a normal power/uplink blinking pattern, but was unable to ping one from the other.

  Read the article

• Wireless connection by using command screen

  - by Amadeus

  I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

  Read the article

• Wifi problems after upgrading to 13.10

  - by Simon

  I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

  Read the article

• What OpenGL version(s) to learn and/or use?

  - by zuko

  So, I'm new to OpenGL... I have general knowledge of game programming but little practical experience. I've been looking into various articles and books and trying to dive into OpenGL, but I've found the various versions and old vs new way of doing things confusing. I guess my first questions is does anyone know some figures about percentages of gamers that can run each version of OpenGL. What's the market share like? 2.x, 3.x, 4.x... I looked into the requirements for Half Life 2 since I know Valve updated it with OpenGL to run on Mac and I know they usually try to hit a very wide user-base, and they say a minimum of GeForce 8 Series. I looked at the 8800 GT on Nvidia's website and it listed support for OpenGL 2.1. Which, maybe I'm wrong, sounds ancient to me since there's already 4.x. I looked up a driver for 8800GT and it says it supports 4.2! A bit of a discrepancy there, lol. I've also read things like XP only supports up to a certain version, or OS X only supports 3.2, or all kinds of other things. Overall, I'm just confused as to how much support there is for various versions and what version to learn/use. I'm also looking for learning resources. My search results thus far have pointed me to the OpenGL SuperBible. The 4th edition has great reviews on Amazon, but it teaches 2.1. The 5th edition teaches 3.3 and there are a couple things in the reviews that mention the 4th edition is better and that the 5th edition doesn't properly teach the new features or something? Basically, even within learning material I'm seeing discrepancies and I just don't even know where to start. From what I understand, 3.x started a whole new way of doing things and I've read from various articles and reviews that you want to "stay away from deprecated features like glBegin(), glEnd()" yet a lot of books and tutorials I've seen use that method. I've seen people saying that, basically, the new way of doing stuff is more complicated yet the old way is bad . Just a side note, personally, I know I still have a lot to learn beforehand, but I'm interested in tessellation; so I guess that factors into it as well, because, as far as I understand that's only in 4.x? [just btw, my desktop supports 4.2]

  Read the article

• Notes - Part I - Say Hello from Java

  - by Silviu Turuga

  Sometimes we need to take small notes to remember things, one way to do this is to use stick notes and have them all around our desktop. But what happening if you have a lot of notes and a small office? You'll need a piece of software that will sort things for you and also it will provide you a quick way to retrieve the notes when need. Did I mention that this will keep your desktop clean and also will reduce paper waste? During the next days we'll gonna create an application that will let you manage your notes, put them in different categories etc. I'll show you step by step what do you need to do and finally you'll have the application run on multiple systems, such as Mac, Windows, Linux, etc. The only pre-requisition for this lesson is to have JDK 7 with JavaFX installed and an IDE, preferably NetBeans. I'll call this application Notes…. Part I - Say Hello from Java  From NetBeans go to Files->New Project Chose JavaFX->JavaFX FXML Application Project Name: Notes FXML name: NotesUI Check Create Application Class and name it Main After this the project is created and you'll see the following structure As a best practice I advice you to have your code in your own package instead of the default one. right click on Source Packages and chose New->Java Package name it something like this: com.turuga.notes and click Next after the package is created, select all the 3 files from step #3 and drag them over the new package chose Refactor, as this will make sure all the references are correctly moved inside the new package now you should have the following structure if you'll try to run the project you'll get an error: Unable to find class: Main right click on project name Notes and click properties go to Run and you'll see Application Class set to Main, but because we have defined our own packages, this location has been change, so click on Browse and the correct one appear: com.turuga.notes.Main last modification before running the project is to right click on NotesUI.fxml and chose Edit (if you'll double click it will open in JavaFX Scene Builder) look around line 9 and change fx:controller="NotesUIController" to fx:controller="com.turuga.notes.NotesUIController" now you are ready to run it and you should see the following On the next lesson we'll continue to play with NetBeans and start working on the interface of our project

  Read the article

• Cannot boot from K/Ubuntu install disk on my UEFI system

  - by user93241

  I just got a new system and have been trying to get it set up w/ Win7 & Kubuntu dual-boot, but I've got a major problem. The BIOS of my motherboard (an Asus Crosshair 990FX) is strictly UEFI -- there is no legacy support mode available. I've been reading up on how to get Kubuntu installed in UEFI mode but no matter what I try I cannot seem to even boot into my install CD/USB key properly. I can get as far as the selection screen ("Try Kubuntu", "Install Kubuntu"...) but this screen starts off not appearing correctly. If I try moving the cursor around it sometimes seems to correct itself and show me my choices. But once I select "Try Kubuntu" it starts loading, the screen goes black and then proceeds to flicker -- about once every 5-10 seconds or so. This continues indefinitely. I've tried this with both Kubuntu & Ubuntu installation media, even the AMD64+Mac Ubuntu variety that is supposed to be a lot more flexible w.r.t. UEFI. The only hint I've had that the system might have booted correctly is a little drum sound that plays when booting from the Ubuntu install disk. Well, that and the fact that when I hit my system's power button it seems to shut down correctly, even ejecting the CD at the end. This might be a video driver issue; my system has two nVidia 550's, one of which is attached to my primary monitor. (The secondary isn't hooked up yet.) I'll keep looking over similar questions but any advice would be greatly appreciated. UPDATE: I've tried booting into my 12.04 install CD twice now, each time using two different options supplied by my BIOS. One seemed to offer the ability to boot into my CD under UEFI mode -- this didn't even produce the initial boot menu. The other method offers the ability to boot into my CD NOT under UEFI mode. This DOES produce the boot menu, but after this point it seems I still cannot get to a proper video mode to see what's going on.

  Read the article

• Finding "Stuff" In OUM

  - by Dave Burke

  One of the first questions people asked when they start using the Oracle Unified Method (OUM) is “how do I find X ?” Well of course no one is really looking for “X”!! but typically an OUM user might know the Task ID, or part of the Task Name, or maybe they just want to find out if there is any content within OUM that is related to a couple of keys words they have in their mind. Here are three quick tips I give people: 1. Open up one of the OUM Views, then click “Expand All”, and then use your Browser’s search function to locate a key Word. For example, Google Chrome or Internet Explorer: <CTRL> F, then type in a key Word, i.e. Architecture This is fast and easy option to use, but it only searches the current OUM page 2. Use the PDF view of OUM Open up one of the OUM Views, and then click the PDF View button located at the top of the View. Depending on your Browser’s settings, the PDF file will either open up in a new Window, or be saved to your local machine. In either case, once the PDF file is open, you can use the built in PDF search commands to search for key words across a large portion of the OUM Method Pack. This is great option for searching the entire Full Method View of OUM, including linked HTML pages, however the search will not included linked Documents, i.e. Word, Excel. 3. Use your operating systems file index to search for key words This is my favorite option, and one I use virtually every day. I happen to use Windows Search, but you could also use Google Desktop Search, of Finder on a MAC. All you need to do (on a Windows machine) is to make sure your local OUM folder structure is included in the Windows Index. Go to Control Panel, select Indexing Options, and ensure your OUM folder is included in the Index, i.e. C:/METHOD/OM40/OUM_5.6 Once your OUM folders are indexed, just open up Windows Search (or Google Desktop Search) and type in your key worlds, i.e. Unit Testing The reason I use this option the most is because the Search will take place across the entire content of the Indexed folders, included linked files. Happy searching!

  Read the article

• The best dvd ripper software in 2014 review

  - by user328170

  The top 3 DVD Ripping Tools in 2014 Nowadays everyone may have several smart mobile devices, such as iphone, ipad air, ipad mini ,Samsung Galaxy and Sony Xperia. If you want to take your movies with your mobile devices, or sometimes just want to backup those classic physical discs on your notebook or workstation with high quality resolutions, you need a fast and stable software to rip them and convert them to the format you like. Fortunately, there are plenty of great software products designed to make the process easy and transform DVD to the files that are playable on any mobile device you choose. We have done a full review on dozens of products. Here are five of the best, based on our review. We test the software from its ripping speed, friendly use guide , reliability and ripping capability. The top one is still Winx DVD Ripper platinum. We've test its 6.1 version 2 years ago for its ability to quickly and easily rip DVDs and Blu-ray discs to high quality MKV files with a single click. It gave us deep impression in the test. This time we test it’s lastest 7.3.5 version. Besides easy use and speed, we test its capability to decrypt all kinds of discs with different protect method, for example, Disney X-project DRM , Sony ArccOS, RCE and region code. The result shows that winx dvd ripper platinum still maintain its advantages in all the area. Winx dvd ripper platinum is a more focused on DVD ripping software with the basic duty to rip and convert DVD. The color of UI is a modern technical sense. All the main functions are shown obviously while others specials are hidden for advanced users, making it more clear and convenient to make option. There are two company weisoft limited and Digiarty who can provide the software. Weisoft limited focus on USA, UK and Australia market. Digiarty focus on others. ripping speed ????? friendly use guide ????? reliability ????? ripping capability ????? The second one DVDFab DVDFab is also very robust during ripping dics. It can also decrypt most of the dics in the market. The shortage it still friendly use and speed. We'd note that the app is frequently updated to cut through the copy protection on even the latest DVDs and Blu-ray discs . The app is shareware, meaning most features are free, including decrypting and ripping to your hard drive. Many of you note that you use another app for compression and authoring, but many of you say they hey, storage is cheap, and the rips from DVDFab are easy, one-click, and work. ripping speed ??? friendly use guide ???? reliability ????? ripping capability ????? The Third one is Handbrake Handbrake is our favorite video encoder for a reason: it's simple, easy to use, easy to install, and offers a lots of options to get the high quality file as a result. If you're scared by them, you don't even have to use them—the app will compensate for you and pick some settings it thinks you'll like based on your destination device. So many of you like Handbrake that many of you use it in conjunction with another app (like VLC, which makes ripping easy)—you'll let another app do the rip and crack the DRM on your discs, and then process the file through Handbrake for encoding. The app is fast, can make the most of multi-core processors to speed up the process, and is completely open source. ripping speed ??? friendly use guide ???? reliability ???? ripping capability ????

  Read the article

• Java SE 7 Update 4??????·???????G1 GC??????“WebLogic+WebSocket”??????????????????????WebLogic Server 12c Forum 2012?????

  - by ???02

  2012?4?????????Java SE 7 Update 4????????·??????(GC)????G1 GC??????????GC???????????? ???????Web??????????????????HTML5??????/???????????????????WebSocket??????????????????WebLogic Server?????????????????????????????? 2012?8????????WebLogic Server 12c Forum 2012???????????·?????????????????????????(???) Java SE 7 Update 4??????G1 GC???????? 2012?8????????WebLogic Server 12c Forum 2012??????????????????·???????????????????????Java EE 6??????????????????????????????????????WebLogic Server????????????????????·???????????????????Java SE 7 Update 4???????GC??HTML5??????1????WebSocket??????????·????????????????????? ?????? Fusion Middleware?????? ?????????????? ???? 2012?4???????Java SE 7 Update 4?????Mac OS X????????????????????????G1 GC?????????? Fusion Middleware?????? ???????????????????????G1 GC???????????????? ????????GC???????????????????????????????????????????????????????????????????????????????????????????·??????????????????????????·??????????GC????????????????1??GC???????????????????????????????? GC????????????????????????????GC??????????????????????GC????GC???????????????????????????????GC??????????????????????????????????????????????????????????????? ???64????????????????????JVM?????64????????????64????JVM????GB???????·????????????????????????GC????????????????GC????????????????????????????·????????????????GC?????????????????????????????????????????????????????????????????SLA????????????????????·?????????????? ????????????????????????Java SE 7 Update 4????????GC?G1 GC?? G1 GC????????????????????????????????????????????????????????????GC???????????????????????????(????????)??????????????????????????????????????????????????????????????????????????????????????????? ??????G1 GC??????????????????????????????????????????? ??G1 GC?????????????????????????????????????????????????????????????????????????????????????????GC?????????????????????64????JVM????????·???????????????????????????????????????GC??????? ???????????????????????? ????????????????????????????????????????????OutOfMemory???????????????????????????????? WebLogic Server 12c?Java SE 7??????????????G1 GC???????????WebLogic Server 11g(10.3.6)??????????????????????GC????????JVM??????????-XX:+UseG1 GC????????????????? HTML5?Web????/?????????WebSocket?????????????????? ?????? Fusion Middleware?????? ?????????? ?????? ?????? Fusion Middleware???????WebLogic Server??????·???????????????????????·?????????Near future of WebLogic / ????WebLogic???????????????Web??????????HTML5???? ????????IT????????????????????1???????·?????????????????????????????????????????????????????????????HTML5?? HTML5???????HTML????????????HTML???Web????????????????????????HTML5???????????????????????????????????????????????HTML5????????/???????????????????????????????????WebWorker?????????????????????????????Web Storage???????API??????HTML5??????????????HTML??????????? ???HTML5??????????????????????WebSocket????????Web????/?????????????????????????? WebSocket????????????????????????(???????)?HTTP????????????????WebSocket????????WebSocket????????????????????????HTTP????????????????????????Web????/??????????????????? WebSocket??????????“??????Web”???????????????????????????????????????????????????????????????1???????????????????????HTTP???????????????????????????????????Comet????HTTP???????????????????????????????WebSocket???????????????????????????????????????????????????????????????? ?????????WebSocket????????????????????????????????????????????????????? WebSocket???????????????????????????? ?????? WebSocket???????(RFC 6455) ?????(Proposed Standard)??? WebSocket API(JavaScript)??(W3C) ????(Last Call Working Draft)??????2012?6?14???? WebSocket API Java EE??(JSR-356) Review Ballot??? ???? Web???? Google Chrome 16?Mozilla Firefox 11?Internet Explorer 10(PP5)?Safari 6??? ???·????? Jetty?jWebSocket?node.js?GlassFish 3.x????? ????????????????(RFC 6455)?????????JavaScript??????????????????????Java EE????????JSR-356?????????????????????????·????????????????????????????·??????????????? ??????????Java???????????????GlassFish????????????????????(JSR-356)??????????????·???·???????????????? ?WebSocket?WebLogic Server ??????????????WebSocket??WebLogic Server???????????????????? WebSocket????HTML5?????????????????????????????????HTML5?????????????????????Java EE?????????HTML5????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????????? ???????HTML5?????????????????????????????????? ????????????? ?????????????????????????????????????????????????????????????????????????????????????????????????????HTML5???????????Java EE??????????????????????????(???) ???????????????????????????????????????????????????????????????????????????????????Java EE?WebLogic?????????????????????????????????????????????????????

  Read the article

• RouterOS on Hyper-V (v3/2012) - any way to get it working?

  - by TomTom

  Trying to set up a small VPN point to connect into a remote Hyper-V cluster using ROuterOS. Anyone got it working ON Hyper-V with the latest builds of RouterOS? It seems the legacy network adapter is not supported anymore either (or just broken). The platform is a Windows Server 2012 RC. This is not a high performance setup - the RouterOS wont do the routing for more than the backend administrative access, and the only real traffic we will see there is when ISO images for new operating systems are uploaded. Otherwise we will have possibly RDP traffic as well as web / http traffioc, but this is internal only (dashboards, some control panel). The server has no public business. So the price for non virtualized network cards is ok for me. After hooking up - ping just does not work. After some time I see in windows (arp -a on the command line), so I know that the Hyper-V side is set up properly. Just no packets arrived. I have turned off all protection on Hyper-V (or : not turned them on), so no MAC spoofing protection etc. in the Advanced page for the legacy adapters. Unless I can get it work I will have to resort to using a windows install as router / VPN endpoint, which introduces another OS into the fabric (we run all routers etc. so far on mikrotik in hardware, which is why I want this one to be RouterOS, too). And no, putting hardware there is NOT an option - the cost would be significant.

  Read the article

• Getting client denied when accessing a wsgi graphite script

  - by Dr BDO Adams

  I'm trying to set up graphite on my Mac OS X 10.7 lion, i've set up apache to call the python graphite script via WSGI, but when i try to access it, i get a forbiden from apache and in the error log. "client denied by server configuration: /opt/graphite/webapp/graphite.wsgi" I've checked that the scripts location is allowed in httpd.conf, and the permissions of the file, but they seem correct. What do i have to do to get access. Below is the httpd.conf, which is nearly the graphite example. <IfModule !wsgi_module.c> LoadModule wsgi_module modules/mod_wsgi.so </IfModule> WSGISocketPrefix /usr/local/apache/run/wigs <VirtualHost _default_:*> ServerName graphite DocumentRoot "/opt/graphite/webapp" ErrorLog /opt/graphite/storage/log/webapp/error.log CustomLog /opt/graphite/storage/log/webapp/access.log common WSGIDaemonProcess graphite processes=5 threads=5 display-name='%{GROUP}' inactivity-timeout=120 WSGIProcessGroup graphite WSGIApplicationGroup %{GLOBAL} WSGIImportScript /opt/graphite/conf/graphite.wsgi process-group=graphite application-group=%{GLOBAL} # XXX You will need to create this file! There is a graphite.wsgi.example # file in this directory that you can safely use, just copy it to graphite.wgsi WSGIScriptAlias / /opt/graphite/webapp/graphite.wsgi Alias /content/ /opt/graphite/webapp/content/ <Location "/content/"> SetHandler None </Location> # XXX In order for the django admin site media to work you Alias /media/ "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site- packages/django/contrib/admin/media/" <Location "/media/"> SetHandler None </Location> # The graphite.wsgi file has to be accessible by apache. <Directory "/opt/graphite/webapp/"> Options +ExecCGI Order deny,allow Allow from all </Directory> </VirtualHost> Can you help?

  Read the article

< Previous Page | 363 364 365 366 367 368 369 370 371 372 373 374  | Next Page >