Search Results

Search found 20640 results on 826 pages for 'key combination'.

Page 368/826 | < Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >

• Secure Password Storage and Transfer

  - by Andras Zoltan

  I'm developing a new user store for my organisation and am now tackling password storage. The concepts of salting, HMAC etc are all fine with me - and want to store the users' passwords either salted and hashed, HMAC hashed, or HMAC salted and hashed - not sure what the best way will be - but in theory it won't matter as it will be able to change over time if required. I want to have an XML & JSON service that can act as a Security Token Service for client-side apps. I've already developed one for another system, which requires that the client double-encrypts a clear-text password using SHA1 first and then HMACSHA1 using a 128 unique key (or nonce) supplied by the server for that session only. I'd like to repeat this technique for the new system - upgrading the algo to SHA256 (chosen since implementations are readily available for all aforementioned platforms - and it's much stronger than SHA1) - but there is a problem. If I'm storing the password as a salted hash in the user-store, the client will need to be sent that salt in order to construct the correct hash before being HMACd with the unique session key. This would completely go against the point of using a salt in the first place. Equally, if I don't use salt for password storage, but instead use HMAC, it's still the same problem. At the moment, the only solution I can see is to use naked SHA256 hashing for the password in the user store, so that I can then use this as a starting point on both the server and the client for a more secure salted/hmacd password transfer for the web service. This still leaves the user store vulnerable to a dictionary attack were it ever to be accessed; and however unlikely that might be - assuming it will never happen simply doesn't sit well with me. Greatly appreciate any input.

  Read the article

• structured vs. unstructured data in db

  - by Igor

  the question is one of design. i'm gathering a big chunk of performance data with lots of key-value pairs. pretty much everything in /proc/cpuinfo, /proc/meminfo/, /proc/loadavg, plus a bunch of other stuff, from several hundred hosts. right now, i just need to display the latest chunk of data in my UI. i will probably end up doing some analysis of the data gathered to figure out performance problems down the road, but this is a new application so i'm not sure what exactly i'm looking for performance-wise just yet. i could structure the data in the db -- have a column for each key i'm gathering. the table would end up being O(100) columns wide, it would be a pain to put into the db, i would have to add new columns if i start gathering a new stat. but it would be easy to sort/analyze the data just using SQL. or i could just dump my unstructured data blob into the table. maybe three columns -- host id, timestamp, and a serialized version of my array, probably using JSON in a TEXT field. which should I do? am i going to be sorry if i go with the unstructured approach? when doing analysis, should i just convert the fields i'm interested in and create a new, more structured table? what are the trade-offs i'm missing here?

  Read the article

• Problem with copying local data onto HDFS on a Hadoop cluster using Amazon EC2/ S3.

  - by Deepak Konidena

  Hi, I have setup a Hadoop cluster containing 5 nodes on Amazon EC2. Now, when i login into the Master node and submit the following command bin/hadoop jar <program>.jar <arg1> <arg2> <path/to/input/file/on/S3> It throws the following errors (not at the same time.) The first error is thrown when i don't replace the slashes with '%2F' and the second is thrown when i replace them with '%2F': 1) Java.lang.IllegalArgumentException: Invalid hostname in URI S3://<ID>:<SECRETKEY>@<BUCKET>/<path-to-inputfile> 2) org.apache.hadoop.fs.S3.S3Exception: org.jets3t.service.S3ServiceException: S3 PUT failed for '/' XML Error Message: The request signature we calculated does not match the signature you provided. check your key and signing method. Note: 1)when i submitted jps to see what tasks were running on the Master, it just showed 1116 NameNode 1699 Jps 1180 JobTracker leaving DataNode and TaskTracker. 2)My Secret key contains two '/' (forward slashes). And i replace them with '%2F' in the S3 URI. PS: The program runs fine on EC2 when run on a single node. Its only when i launch a cluster, i run into issues related to copying data to/from S3 from/to HDFS. And, what does distcp do? Do i need to distribute the data even after i copy the data from S3 to HDFS?(I thought, HDFS took care of that internally) IF you could direct me to a link that explains running Map/reduce programs on a hadoop cluster using Amazon EC2/S3. That would be great. Regards, Deepak.

  Read the article

• emacs frustration with web development

  - by Tony Cruise

  I really liked flexibility of emacs but it is really annoying to make it work. I want to use it for web development html, css, javascript, php. I first tried emacs-starter-kit . It didn't included nXhtml. Also C-g key binding does not work (they call it starter kit but basic key command does not work). I think it is mapped for git control. That's a frustration for a beginner. Then I replaced emacs-starter-kit with nXhtml. At least C-g is working. But code completion sucks, M-tab does not work. I tried code completion from nXhtml menu with no success. Also NXhtml mode did'nt colorized my file if css is mixed with html. Isn't it recommended for mixed html, css,php files. So why it doesnt work?. Why Emacs folks do not aware of convention over configuration? Dam! ship it something works! Please help me before I am getting crazy. I use Ubuntu 10.04 and emacs-snaphot-gtk 23.1.50-1. Please guide step by step with your working dotfile url. Even I accept I am a dummy it really annoying and frustrating to use emacs.

  Read the article

• Opposite of nl2br? Is it str_replace?

  - by Julian H. Lam

  So the function nl2br is handy. Except in my web app, I want to do the opposite, interpret line breaks as new lines, since they will be echoed into a pre-filled form. str_replace can take <br /> and replace it with whatever I want, but if I put in \n, it echoes literally a backslash and an n. It only works if I put a literal line break in the middle of my script, and break the indentation (so there are no trailing space). See: <?=str_replace('<br />',' ',$foo)?> Am I missing escape characters? I think I tried every combination...

  Read the article

• PLKs and Web Service Software Factory

  - by Nix

  We found a bug in Web Service Software Factory a description can be found here. There has been no updates on it so we decided to download the code and fix it ourself. Very simple bug and we patched it with maybe 3 lines of code. However* we have now tried to repackage it and use it and are finding that this is seemingly an impossible process. Can someone please explain to me the process of PLKs? I have read all about them but still don't understand what is really required to distribute a VS package. I was able to get it to load and run using a PLK obtained from here, but i am assuming that you have to be a partner to get a functional PLK that will be recognized on other peoples systems? Every time i try and install this on a different computer I get a "Package Load Failure". Is the reason I am getting errors because I am not using a partner key? Is there any other way around this? For instance is there any way we can have an "internal" VS package that we can distribute? Edit Files I had to change to get it to work. First run devenv PostInstall.proj Generate your plks and replace ##Package PLK## (.resx files) --Just note that package version is not the class name but is "Web Service Software Factory: Modeling Edition" -- And you need to remove the new lines from the key ProductDefinitionRegistryFragment.wxi line 1252(update version to whatever version you used in plk) Uncomment all // [VSShell::ProvideLoadKey("Standard", Constant in .tt files.

  Read the article

• JVM/CLR Source-compatible Language Options

  - by Nathan Voxland

  I have an open source Java database migration tool (http://www.liquibase.org) which I am considering porting to .Net. The majority of the tool (at least from a complexity side) is around logic like "if you are adding a primary key and the database is Oracle use this SQL. If database is MySQL use this SQL. If the primary key is named and the database is Postgres use this SQL". I could fork the Java codebase and covert it (manually and/or automatically), but as updates and bug fixes to the above logic come in I do not want to have to apply it to both versions. What I would like to do is move all that logic into a form that can be compiled and used by both Java and .Net versions naively. The code I am looking to convert does not contain any advanced library usage (JDBC, System.out, etc) that would vary significantly from Java to .Net, so I don't think that will be an issue (at worst it can be designed around). So what I am looking for is: A language in which I can code common parts of my app in and compile it into classes usable by the "standard" languages on the target platform Does not add any runtime requirements to the system Nothing so strange that it scares away potential contributors I know Python and Ruby both have implementations on for the JVM and CLR. How well do they fit my requirements? Has anyone been successful (or unsuccesful) using this technique for cross-platform applications? Are there any gotcha's I need to worry about?

  Read the article

• Problem with sfRemember cookie / sfGuard Remember me

  - by Tom

  I'm using Symfony 1.4 with Doctrine. Sorry if this is a silly question but what exactly does one need to build on top of the sfDoctrineGuardPlugin to get the "remember me" functionality working? When I login a user, the sfRemember cookie is created with the default 15-day lifetime, and the remember key is saved in the plugin's sf_guard_remember_key table. Without any tweaks to the plugin, the sfGuardSecurityUser SignIn() method creates the cookie, but the Signout() method erases it, leaving no cookie unless you're logged in! Signin(): sfContext::getInstance()->getResponse()->setCookie($remember_cookie, $key, time() + $expiration_age); Signout(): sfContext::getInstance()->getResponse()->setCookie($remember_cookie, '', time() - $expiration_age); I can see that the database table saves the cookie as a relation of sf_guard_user, but that's not much good if the cookie is gone.... I'd be grateful if someone could tell me what I'm missing here, and ideally, if I prevent the Signout() method from removing the cookie, do I need to write code to read the cookie myself or is this automated somewhere/somehow? I've got box-standard Symfony 1.4 and sfDoctrineGuardPlugin installations. It all just seems totally wrong and the documentation on this is non-existent. Any help would appreciated.

  Read the article

• Output Path property issue on build server

  - by Jay Clarke

  I am working in the .NET 3.5 framework. I have a project that builds fine locally. I can build it on our build server when the source files are posted there. However when I am running the build process through Visual Studio 2010 I get a warning that says "C:\WINDOWS\Microsoft.NET\Framework64\v3.5\Microsoft.Common.targets: The OutputPath property is not set for this project. Please check to make sure that you have specified a valid Configuration/Platform combination. Configuration='DEV' Platform='Any CPU'" Any suggestions anyone has or if you need additional information please let me know. I have been struggling with this for a couple of days now. Thanks in advance for your help. Jay Clarke

  Read the article

• NHibernate with nothing but stored procedures

  - by ChrisB2010

  I'd like to have NHibernate call a stored procedure when ISession.Get is called to fetch an entity by its key instead of using dynamic SQL. We have been using NHibernate and allowing it to generate our SQL for queries and inserts/updates/deletes, but now may have to deploy our application to an environment that requires us to use stored procedures for all database access. We can use sql-insert, sql-update, and sql-delete in our .hbm.xml mapping files for inserts/updates/deletes. Our hql and criteria queries will have to be replaced with stored procedure calls. However, I have not figured out how to force NHibernate to use a custom stored procedure to fetch an entity by its key. I still want to be able to call ISession.Get, as in: using (ISession session = MySessionFactory.OpenSession()) { return session.Get<Customer>(customerId); } and also lazy load objects, but I want NHibernate to call my "GetCustomerById" stored procedure instead of generating the dynamic SQL. Can this be done? Perhaps NHibernate is no longer a fit given this new environment we must support.

  Read the article

• python: how to design a container with elements that must reference their container

  - by Luke404

  (the title is admittedly not that great. Please forgive my English, this is the best I could think of) I'm writing a python script that will manage email domains and their accounts, and I'm also a newby at OOP design. My two (related?) issues are: the Domain class must do special work to add and remove accounts, like adding/removing them to the underlying implementation how to manage operations on accounts that must go through their container To solve the former issue I'd add a factory method to the Domain class that'll build an Account instance in that domain, and a 'remove' (anti-factory?) method to handle deletions. For the latter this seems to me "anti-oop" since what would logically be an operation on an Account (eg, change password) must always reference the containing Domain. Seems to me that I must add to the Account a reference back to the Domain and use that to get data (like the domain name) or call methods on the Domain class. Code example (element uses data from the container) that manages an underlying Vpopmail system: class Account: def __init__(self, name, password, domain): self.name = name self.password = password self.domain = domain def set_password(self, password): os.system('vpasswd %s@%s %s' % (self.name, self.domain.name, password) self.password = password class Domain: def __init__(self, domain_name): self.name = domain_name self.accounts = {} def create_account(self, name, password): os.system('vadduser %s@%s %s' % (name, self.name, password)) account = Account(name, password, self) self.accounts[name] = account def delete_account(self, name): os.system('vdeluser %s@%s' % (name, self.name)) del self.accounts[name] another option would be for Account.set_password to call a Domain method that would do the actual work - sounds equally ugly to me. Also note the duplication of data (account name also as dict key), it sounds logical (account names are "primary key" inside a domain) but accounts need to know their own name.

  Read the article

• PHP cURL JSON Decode (X-AUTH Header)

  - by TheCyX

  <?php // Show Profile $curl = curl_init(); curl_setopt ($curl, CURLOPT_URL, "https://example/api"); curl_setopt ($curl, CURLOPT_RETURNTRANSFER, true); curl_setopt ($curl, CURLOPT_HTTPAUTH, CURLAUTH_BASIC ) ; curl_setopt ($curl, CURLOPT_HTTPHEADER, array('X-AUTH: 123456789')); $projects = curl_exec($curl); // This is empty? echo $projects; //Decode $phpArray = json_decode($projects); print_r($phpArray); foreach ($phpArray as $key => $value) { // Line 17, sure its empty, but why? echo "<p>$key | $value</p>"; } ?> Warning: Invalid argument supplied for foreach() in /html/api.php on line 17 The API needs this authentification: $ curl -i -H "X-AUTH: 123456789" https://example/api JSON File: {"id":"123456","hostId":null,"Nickname":"thecyx","DisplayName":"thecyx","AppDisplayName":"thecyx","Score":"300","Account":"Full"} The $project variable is empty. If I'm posting the API Url in the Broswer its working. And, if possible, what's the correct way to get the JSON Data e.g. [Nickname],[Score]?

  Read the article

• SQL: How do I return zeroes where there is nothing to aggregate across?

  - by Karl

  Hi What I would like ask is best illustrated by an example, so bear with me. Suppose I have the following table: TypeID Gender Count 1 M 10 1 F 3 1 F 6 3 M 11 3 M 8 I would like to aggregate this for every possible combination of TypeID and Gender. Where TypeID can be 1,2 or 3 and Gender can be M or F. So what I want is the following: TypeID Gender SUM(Count) 1 M 10 1 F 9 2 M 0 2 F 0 3 M 19 3 F 0 I can think of a few ways to potentially do this, but none of them seem particularly elegant to me. Any suggestions would be greatly appreciated! Karl

  Read the article

• Using the groupby method in Python, example included

  - by randombits

  Trying to work with groupby so that I can group together files that were created on the same day. When I say same day in this case, I mean the dd part in mm/dd/yyyy. So if a file was created on March 1 and April 1, they should be grouped together because the "1" matches. Here's the code I have so far: #!/usr/bin/python import os import datetime from itertools import groupby def created_ymd(fn): ts = os.stat(fn).st_ctime dt = datetime.date.fromtimestamp(ts) return dt.year, dt.month, dt.day def get_files(): files = [] for f in os.listdir(os.getcwd()): if not os.path.isfile(f): continue y,m,d = created_ymd(f) files.append((f, d)) return files files = get_files() for key, group in groupby(files, lambda x: x[1]): for file in group: print "file: %s, date: %s" % (file[0], key) print " " The problem is, I get lots of files that get grouped together based on the day. But then I'll see multiple groups with the same day. Meaning I might have 4 files grouped that were created on the 17th. Later on I'll see another unique set of 2 files that are also created on the 17th. Where am I going wrong?

  Read the article

• text-area-text-to-be-split-with-conditions repeated

  - by desmiserables

  I have a text area wherein i have limited the user from entering more that 15 characters in one line as I want to get the free flow text separated into substrings of max limit 15 characters and assign each line an order number. This is what I was doing in my java class: int interval = 15; items = new ArrayList(); TextItem item = null; for (int i = 0; i < text.length(); i = i + interval) { item = new TextItem (); item.setOrder(i); if (i + interval < text.length()) { item.setSubText(text.substring(i, i + interval)); items.add(item); } else { item.setSubText(text.substring(i)); items.add(item); } } Now it works properly unless the user presses the enter key. Whenever the user presses the enter key I want to make that line as a new item having only that part as the subText. I can check whether my text.substring(i, i + interval) contains any "\n" and split till there but the problem is to get the remaining characters after "\n" till next 15 or till next "\n" and set proper order and subText.

  Read the article

• How do I design the file storage issue?

  - by user102533

  I am working on an application that creates video files and stores them in a folder in the C:\ drive. I speculate that there will be a large number of these files in the future and we would run out of disk space at some point of time (on our VPS). When the time comes that we have to upgrade, we either plan to use one of the Cloud providers to store files or our existing provider can add another disk (say D:\ drive). Either way, I would want to design the app now in a way that in future, moving to different locations would not be an issue and would be transparent to the end user. The code that creates these files supports 2 ways: myObj.SetOutputToDisk(<path to store>); or myObj.SetOutputToMemoryStream(ms); If we go with the Cloud architecture, I assume we might have the following combination: Cloud Files + Existing VPS or Cloud Files + Cloud Windows Server Given the unknowns at this time, how would I go about designing this?

  Read the article

• how can load images from plist in to UITableView ?

  - by srikanth rongali

  I have stored the videos and the thumbnail images of the videos in Documents folder. And I have given the path in plist. In plist I took an array and I added directories to the array. And in the dictionary I stored the image path /Users/srikanth/Library/Application Support/iPhone Simulator/User/Applications/9E6E8B22-C946-4442-9209-75BB0E924434/Documents/image1 for key imagePath. for video /Users/srikanth/Library/Application Support/iPhone Simulator/User/Applications/9E6E8B22-C946-4442-9209-75BB0E924434/Documents/video1.mp4 for key filePath. I used following code but it is not working. I am trying only for images. I need the images to be loaded in the table in each cell. - (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath { static NSString *CellIdentifier = @"Cell"; UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:CellIdentifier]; if (cell == nil) { cell = [[[UITableViewCell alloc] initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease]; [cell setAccessoryType:UITableViewCellAccessoryDetailDisclosureButton]; UIImageView *image2 = [[UIImageView alloc]init]; image2.frame = CGRectMake(0.0f, 0.0f, 80.0f, 80.0f); image2.backgroundColor = [UIColor clearColor]; //image2.image = [UIImage imageNamed:@"snook.png"]; image2.tag = tag7; } NSDictionary *dictOfplist = [cells objectAtIndex:indexPath.row]; [(UIImageView *)[cell viewWithTag:tag7] setImage:[dictOfplist objectForKey:@"imagePath"]]; return cell; } - (void)viewDidLoad { [super viewDidLoad]; self.title = @"Library"; self.navigationItem.rightBarButtonItem = [[UIBarButtonItem alloc] initWithTitle:@"Close" style:UIBarButtonItemStyleBordered target:self action:@selector(close:)]; NSString* plistPath = [[NSBundle mainBundle] pathForResource:@"details" ofType:@"plist"]; contentArray = [NSArray arrayWithContentsOfFile:plistPath]; cells = [[NSMutableArray alloc]initWithCapacity:[contentArray count]]; for(dCount = 0; dCount < [contentArray count]; dCount++) [cells addObject:[contentArray objectAtIndex:dCount]]; } How can I make this work. Thank you.

  Read the article

• wix The directory is in the user profile but is not listed in the RemoveFile table

  - by Venkat S. Rao

  I have the following configuration to delete and copy a file from WIX. <Directory Id='TARGETDIR' Name='SourceDir'> ... <Directory Id="AppDataFolder" Name="AppDataFolder"> <Directory Id="GleasonAppData" Name="Gleason" > <Directory Id="GleasonStudioAppData" Name="GleasonStudio"> <Directory Id="DatabaseAppData" Name ="Database"> <Directory Id="UserSandboxesAppData" Name="UserSandboxes" /> </Directory> </Directory> </Directory> </Directory> </Directory> <DirectoryRef Id="UserSandboxesAppData"> <Component Id="comp_deleteBackup" Guid="1f159f49-3029-4f46-b194-e42aabd40844"> <RemoveFile Id="RemoveBackup" Directory="UserSandboxesAppData" Name="DevelopmentBackUp.FDB" On="install" /> <RegistryKey Root="HKCU" Key="Software\Gleason\Database\RemoveBackup"> <RegistryValue Value="Removed" Type="string" KeyPath="yes" /> </RegistryKey> </Component> <Component Id="comp_createBackup" Guid="557badef-6d77-4c4e-aa5f-8d88cb5ef735"> <CopyFile Id="DBBackup" DestinationDirectory="UserSandboxesAppData" DestinationName="DevelopmentBackUp.FDB" SourceDirectory="UserSandboxesAppData" SourceName="Development.FDB" /> <RegistryKey Root="HKCU" Key="Software\Gleason\Database\CopyBackup"> <RegistryValue Value="Copied" Type="string" KeyPath="yes" /> </RegistryKey> </Component> </DirectoryRef> I get 4 errors related to ICE64--The directory 'xxx' is in the user profile but is not listed in the RemoveFile table. xxx={UserSandboxesAppData, DatabaseAppData, GleasonStudioAppData, GleasonAppData} Someone else had a very similar problem here: Directory xx is in the user profile but is not listed in the RemoveFile table. . But that solution did not help me. What do I need to change? Thank You, Venkat Rao

  Read the article

• New Perl user: using a hash of arrays

  - by Zach H

  I'm doing a little datamining project where a perl script grabs info from a SQL database and parses it. The data consists of several timestamps. I want to find how many of a particular type of timestamp exist on any particular day. Unfortunately, this is my first perl script, and the nature of perl when it comes to hashes and arrays is confusing me quite a bit. Code segment: my %values=();#A hash of the total values of each type of data of each day. #The key is the day, and each key stores an array of each of the values I need. my @proposal; #[drafted timestamp(0), submitted timestamp(1), attny approved timestamp(2),Organiziation approved timestamp(3), Other approval timestamp(4), Approved Timestamp(5)] while(@proposal=$sqlresults->fetchrow_array()){ #TODO: check to make sure proposal is valid #Increment the number of timestamps of each type on each particular date my $i; for($i=0;$i<=5;$i++) $values{$proposal[$i]}[$i]++; #Update rolling average of daily #TODO: To check total load, increment total load on all dates between attourney approve date and accepted date for($i=$proposal[1];$i<=$proposal[2];$i++) $values{$i}[6]++; } I keep getting syntax errors inside the for loops incrementing values. Also, considering that I'm using strict and warnings, will Perl auto-create arrays of the right values when I'm accessing them inside the hash, or will I get out-of bounds errors everywhere? Thanks for any help, Zach

  Read the article

• Is it practical to program with your feet?

  - by bmm

  Has anyone tried using foot pedals in addition to the traditional keyboard and mouse combo to improve your effectiveness in the editor? Any actual experiences out there? Does it work, or is it just for carpal tunnel relief? I found one blog entry from a programmer who actually tried it: So now I can type using my feet for most of the modifier keys. I am using the pedals as I type this. I am still getting used to them, but the burning in my left wrist has definitely reduced. I think I can also type a little faster, but I am too lazy to do the speed tests with and without the pedals to verify this. On the negative side: Working out where to put your feet when you aren’t typing can be a little awkward. The pedals tend to move around the carpet, despite being metal and quite heavy. Some small spikes might have helped. Although the travel on the pedals is small, they are surprisingly stiff. Another programmer's experience: Anybody with hand pain must get foot pedals, since they can remove a tremendous load from your hands. I have two foot pedals, and use one for the SHIFT key, and the other for the CONTROL key. (I still type META by hand.) I have found that in the process of using the Emacs text editor to compose computer programs, I tend to use the SHIFT, CONTROL and META keys constantly, and it is easy to remove most of this load from one's hands. Some foot switch products: Savant Elite Triple Foot Switch FragPedal Bilbo Step On It!

  Read the article

• C# .NET: Descending comparison of a SortedDictionary?

  - by Rosarch

  I'm want a IDictionary<float, foo> that returns the larges values of the key first. private IDictionary<float, foo> layers = new SortedDictionary<float, foo>(new DescendingComparer<float>()); class DescendingComparer<T> : IComparer<T> where T : IComparable<T> { public int Compare(T x, T y) { return -y.CompareTo(x); } } However, this returns values in order of the smallest first. I feel like I'm making a stupid mistake here. Just to see what would happen, I removed the - sign from the comparator: public int Compare(T x, T y) { return y.CompareTo(x); } But I got the same result. This reinforces my intuition that I'm making a stupid error. This is the code that accesses the dictionary: foreach (KeyValuePair<float, foo> kv in sortedLayers) { // ... } UPDATE: This works, but is too slow to call as frequently as I need to call this method: IOrderedEnumerable<KeyValuePair<float, foo>> sortedLayers = layers.OrderByDescending(kv => kv.Key); foreach (KeyValuePair<float, ICollection<IGameObjectController>> kv in sortedLayers) { // ... } UPDATE: I put a break point in the comparator that never gets hit as I add and remove kv pairs from the dictionary. What could this mean?

  Read the article

• Getting error while connecting to facebook

  - by Bakhtiyor

  I have downloaded php-sdk for using facebook in php. I also created facebook application in the facebook web page in order to get API key and secret key. When I run example.php and try to connect to facebook it shows me the following error: Configuration errors: To fix this error, please set your Connect URL in the application settings editor. Once it has been set, users will be redirected to that URL instead of this page after logging in. I am using this php-sdk in the localhost. I tried to assign localhost as Connect URL but facebook doesn't accept it. I have read about Cross Domain Communication Channel and think this is what I need. But I don't know how to use it. Anyone can help me to solve this problem please? Update Actually what I need is following. I have Web Application and need to connect to facebook and search for users in facebook who has specific(user will specify this) Likes and Interests. Any idea about solving my problem?

  Read the article

• Equivalents of Java and .NET technologies/frameworks

  - by Paul Sasik

  I work in a shop that is a mix of mostly Java and .NET technologists. When discussing new solutions and architectures we often encounter impedance in trying to compare the various technologies, frameworks, APIs etc. in use between the two camps. It seems that each camp knows little about the other and we end up comparing apples to oranges and forgetting about the bushels. While researching the topic I found this: Java -- .Net rough equivalents It's a nice list but it's not quite exhaustive and is missing the key .NET 3.0 technologies and a few other tidbits. To complete that list: what are the near/rough equivalents (or a combination of technologies) in Java to the following in .NET? WCF WPF Silverlight WF Generics Lambda expressions Linq (not Linq-to-SQL) TPL F# IronPython IronRuby ...have i missed anything else? Note that I omitted technologies that are already covered in the linked article. I would also like to hear feedback on whether the linked article is accurate. Thanks.

  Read the article

• How to use SQLAlchemy to dump an SQL file from query expressions to bulk-insert into a DBMS?

  - by Mahmoud Abdelkader

  Please bear with me as I explain the problem, how I tried to solve it, and my question on how to improve it is at the end. I have a 100,000 line csv file from an offline batch job and I needed to insert it into the database as its proper models. Ordinarily, if this is a fairly straight-forward load, this can be trivially loaded by just munging the CSV file to fit a schema, but I had to do some external processing that requires querying and it's just much more convenient to use SQLAlchemy to generate the data I want. The data I want here is 3 models that represent 3 pre-exiting tables in the database and each subsequent model depends on the previous model. For example: Model C --> Foreign Key --> Model B --> Foreign Key --> Model A So, the models must be inserted in the order A, B, and C. I came up with a producer/consumer approach: - instantiate a multiprocessing.Process which contains a threadpool of 50 persister threads that have a threadlocal connection to a database - read a line from the file using the csv DictReader - enqueue the dictionary to the process, where each thread creates the appropriate models by querying the right values and each thread persists the models in the appropriate order This was faster than a non-threaded read/persist but it is way slower than bulk-loading a file into the database. The job finished persisting after about 45 minutes. For fun, I decided to write it in SQL statements, it took 5 minutes. Writing the SQL statements took me a couple of hours, though. So my question is, could I have used a faster method to insert rows using SQLAlchemy? As I understand it, SQLAlchemy is not designed for bulk insert operations, so this is less than ideal. This follows to my question, is there a way to generate the SQL statements using SQLAlchemy, throw them in a file, and then just use a bulk-load into the database? I know about str(model_object) but it does not show the interpolated values. I would appreciate any guidance for how to do this faster. Thanks!

  Read the article

• Normalize or Denormalize in high traffic websites

  - by Inam Jameel

  what is the best practice for database design for high traffic websites like this one stackoverflow? should one must use normalize database for record keeping or normalized technique or combination of both? is it sensible to design normalize database as main database for record keeping to reduce redundancy and at the same time maintain another denormalized form of database for fast searching? or main database should be denormalize and one can make normalized views in the application level for fast database operations? or beside above mentioned approach? what is the best practice of designing high traffic websites???

  Read the article

< Previous Page | 364 365 366 367 368 369 370 371 372 373 374 375  | Next Page >