Search Results

Search found 10211 results on 409 pages for 'adf controller'.

Page 370/409 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

• Negative number representation across multiple architechture

  - by Donotalo

  I'm working with OKI 431 micro controller. It can communicate with PC with appropriate software installed. An EEPROM is connected in the I2C bus of the micro which works as permanent memory. The PC software can read from and write to this EEPROM. Consider two numbers, B and C, each is two byte integer. B is known to both the PC software and the micro and is a constant. C will be a number so close to B such that B-C will fit in a signed 8 bit integer. After some testing, appropriate value for C will be determined by PC and will be stored into the EEPROM of the micro for later use. Now the micro can store C in two ways: The micro can store whole two byte representing C The micro can store B-C as one byte signed integer, and can later derive C from B and B-C I think that two's complement representation of negative number is now universally accepted by hardware manufacturers. Still I personally don't like negative numbers to be stored in a storage medium which will be accessed by two different architectures because negative number can be represented in different ways. For you information, 431 also uses two's complement. Should I get rid of the headache that negative number can be represented in different ways and accept the one byte solution as my other team member suggested? Or should I stick to the decision of the two byte solution because I don't need to deal with negative numbers? Which one would you prefer and why?

  Read the article

• Grails - Removing an item from a hasMany association List on data bind?

  - by ecrane

  Grails offers the ability to automatically create and bind domain objects to a hasMany List, as described in the grails user guide. So, for example, if my domain object "Author" has a List of many "Book" objects, I could create and bind these using the following markup (from the user guide): <g:textField name="books[0].title" value="the Stand" /> <g:textField name="books[1].title" value="the Shining" /> <g:textField name="books[2].title" value="Red Madder" /> In this case, if any of the books specified don't already exist, Grails will create them and set their titles appropriately. If there are already books in the specified indices, their titles will be updated and they will be saved. My question is: is there some easy way to tell Grails to remove one of those books from the 'books' association on data bind? The most obvious way to do this would be to omit the form element that corresponds to the domain instance you want to delete; unfortunately, this does not work, as per the user guide: Then Grails will automatically create a new instance for you at the defined position. If you "skipped" a few elements in the middle ... Then Grails will automatically create instances in between. I realize that a specific solution could be engineered as part of a command object, or as part of a particular controller- however, the need for this functionality appears repeatedly throughout my application, across multiple domain objects and for associations of many different types of objects. A general solution, therefore, would be ideal. Does anyone know if there is something like this included in Grails?

  Read the article

• ios UITableView reloadData don't increase content height

  - by Zoltan Varadi

  I'm facing a strange error in my iOS app and haven't been able to figure out the reason why. In my UITableView i can add new cells, so i refresh the array that is the datasource and call reloadData. Everything works without error. The numberOfRowsInSection is called again, and it's value is one more than it's previous value was. The new cell even gets inserted at the bottom of the tableview, but i cant scroll down to it. I only know that it's there because the tableview bounces and i can see it. I'm guessing the tableview's content height is not getting increased for some reason, but i have no idea why. I'm using iOS 6 btw. Any help is very much appreciated! Thanks, Zoli EDIT, answers for Srikanth's questions: How is data getting added. There's an NSArray containing objects of a specific type. The array.count is the number of the number of cells. This NSArray gets its values from a database query. When you say, you are refreshing the array, what do you mean. By refreshing the array i mean i execute a new query in the database and put the results of this query into an NSArray. this will be the tableview's datasource array. Like this: dataSourceArray = [dbManager executeQuery]; [tableView reloadData]; Are you adding the data within the same view controller Yes. Can you show some code as to what you are doing See above. Is the table view at the root of the view controllers view or is it within another view The tableview is the main view's first child. Can you try adding data to the array at the beginning, so that you can view the cell being added at the top. I don't understand what you mean.

  Read the article

• JasperReports reports access image via authenticated URL

  - by user363115

  Hi all, I am hoping that this is a simple issue with a simple solution and that I have missed something obvious. Let me explain the problem; We have an application that generates PDF reports (using Jasper). These reports contain data from our database, as well as imagery (photographs). These photographs are stored in S3. We use signed URLs to access these photographs. We link these photographs into our Jasper reports using these S3 URLs. Because the S3 URLs are signed and time-limited (by design), the process is as follows; User requests a report to be generated, Report is filled, and goes to our database (at which time UUIDs to any required images are retrieved), For each UUID an S3 signed URL must be generated, To do this the URL behind each report image is a call to an authenticated URL in our app (/get_img?uuid=foo), The controller behind this URL generates a signed S3 URL and returns it, Reports loads the image. The problem is with step (4) - the call to the authenticated URL fails because Jasper does not pass any authentication information with the request. Is there a solution here? Thanks all for your time. Ben

  Read the article

• Java EE 6: JSF vs Servlet + JSP. Should I bother learning JSF?

  - by Harry Pham

  I am trying to get familiar with Java EE 6 by reading http://java.sun.com/javaee/6/docs/tutorial/doc/gexaf.html. I am a bit confused about the use of JSF. Usually, the way I develop my Web App would be, Servlet would act like a controller and JSP would act like a View in an MVC model. So Does JSF try to replace this structure? Below are the quote from the above tutorial: Servlet are best suited for service-oriented App and control function of presentation-oriented App like dispatching request JSF and Facelet are more appropriated for generating mark-up like XHTML, and generally used for presentation-oriented App Not sure if I understand the above quote too well, they did not explain too well what is service-oriented vs presentation-oriented. A JavaServer Faces application can map HTTP requests to component-specific event handling and manage components as stateful objects on the server. Any knowledgeable Java developer out there can give me a quick overview about JSF, JSP and Servlet? Do I integrate them all, or do I use them separated base on the App? if so then what kind of app use JSF in contrast with Servlet and JSP A JavaServer Faces application can map HTTP requests to component-specific event handling and manage components as stateful objects on the server. Sound like what servlet can do, but not sure about manage components as stateful objects on the server. Not even sure what that mean? Thanks in advance.

  Read the article

• iphone nsarray problem?

  - by Brodie4598

  Okay maybe i just need another set of eyes on this, but I have the following lines of code in one of my view controllers. It takes some data from a file, and populates it into an array using "\n" as a separator. I then use that array to make an NSDictionary, which is used to populate a tableview. It's very simple. However it isnt working. Here's the code: NSString *dataString = [NSString stringWithContentsOfFile:checklistPath encoding: NSUTF8StringEncoding error:NULL]; if ([dataString hasPrefix:@"\n"]) { dataString = [dataString substringFromIndex:1]; } NSArray *tempArray = [dataString componentsSeparatedByString:@"\n"]; NSLog(@"datastring:%@",dataString); NSLog(@"temp array:",tempArray); NSLog(@"%i",[tempArray count]); NSDictionary *temporaryDictionary = [NSDictionary dictionaryWithObject: tempArray forKey:@"User Generated Checklist"]; self.names = temporaryDictionary; NSLog(@"names:%@",names); so in the log, datastring is correct, so it's correctly pulling the data from a file. however for tempArray, i get: 2010-05-17 19:15:55.825 MyApp[7309:207] temp array: for the tempArray count i get: 2010-05-17 19:15:55.826 myApp[7309:207] 5 which is the correct number of strings in the array So i'm stumped. I have the EXACT same few lines of code in a different view controller and it works perfectly. Whats crazier is the last NSLog, that shows the final NSDictionary (names) displays this, which looks correct: 2010-05-17 19:15:55.827 FS Companion[7309:207] names:{ "User Generated Checklist" = ( "System|||ACTION", "System|||ACTION", "System|||ACTION", "System|||ACTION", "System|||ACTION" ); \ am i missing something really obvious??

  Read the article

• Super inplace controls in_place_select displays incorrectly

  - by Magicked

  I'm using the super_inplace_controls plugin to allow users to edit fields on the "show" page. However, I'm running into an issue with the in_place_select function. Here is my view: <p> <b>Status:</b> <%= in_place_select :incident, :incident_status, :choices => @statuses.map { |e| [e.name, e.id] } %> </p> This is in the 'Incident' view. IncidentStatus is a separate table that has_many Incidents. In the Incident controller, I retrieve @statuses like so: @statuses = IncidentStatus.find(:all) Everything works fine for the in_place_select, except the original display. In my browser, it shows: Status: #<IncidentStatus:0x1033147d8> Which means it's not grabbing the current incident_status.name, but it's just changing the object to a string. I'm not sure how to fix this! When I click on the "IncidentStatus:0x1033147d8", everything works properly and I can select the proper fields. Thanks for any help!

  Read the article

• How do I switch out Views in a Cocoa application?

  - by David Garcia

  So I'm beginning to learn how to use Cocoa. I think I've pretty much got it but I'm hung up on creating and switching views. I'm rewriting a game I made a little bit ago for practice. All I want is one window (preferably not resizable) and I want to be able to switch out views for different screens in the game. First, I have the main menu (Start Game, High Scores, Exit). Then I need a window for each screen (Gameplay screen, Highscore screen). What I'm getting confused with is how to design this. I looked up NSViewController thinking it manages views but it doesn't. It only manages one view by loading it really. I don't understand why I'd need to use NSViewController then. Couldn't I just have a window class that contains multiple subclasses of NSView and load them like that? I'm not sure I understand the purpose of the ViewController. Does my Window Class really need to subclass NSWindowController? I was trying to follow the example of Apple's ViewController example and it has a window controller class that's a subclass of NSWindowController. I don't see what the purpose was of subclassing that. All NSWindowController seems to add is - initWithPath:(NSString *)newPath but I fail to see the use in that either when I can just edit the plist file to open the window on start up. Apple's example also has an NSView variable and an NSViewController variable. Don't you only need one variable to store the current view? Thanks in advance guys, I'm really confused as to how this works.

  Read the article

• How can I set the tab on a webpage depending on which page you come from in ASP.Net MVC?

  - by uriDium

  I have a rather large entity. It has a parent relationship with many different child tables. Each of the child tables I have represented as a tab (luckily it makes sense and looks nice and makes things easier to navigate). If the users wants to add a new child row, they go the particular tab, and there they see a list of rows which is owned by the parent and they can do the usual CRUD. The CRUD takes them to a new controller and action and passes the ID of the parent to the action. (This is as far as I can tell what I was meant to do, any other ideas??) When they have finsihed they click save and it takes them back to the original page BUT I want it to automatically go to the right tab. How can I do this? I am using Jquery UI tabs, ASP.Net MVC 2.0. One idea I had was to just go back to the bookmark (the href part with the #, for e.g. /Parent/Details/4/#tabname). Apparently JQuery UI tabs can handle this. Or to set the tab name as part of the query string (/Parent/Details/4?tab=name) What is the best practise here?

  Read the article

• Initialize child models at model creation

  - by Antoine

  I have a model Entree which belongs to a model Vin, which itself belongs to a model Producteur. On the form for Entree creation/edition, I want to allow the user to define the attributes for parent Vin and Producteur to create them, or retrieve them if they exist (retrieval based on user input). For now I do the following in Entree new and edit actions: @entree = Entree.new @entree.vin = Vin.new @entree.vin.producteur = Producteur.new and use fields_for helper in the form,and that works. But I intend to have much more dependencies with more models, so I want to keep it DRY. I defined a after_initialize callback in Vin model which does the producteur initialization: class Vin < ActiveRecord::Base after_initialize :vin_setup def vin_setup producteur = Producteur.new end end and remove the producteur.new from the controller. However, get an error on new action: undefined method `model_name' for NilClass:Class for the line in the form that says <%= fields_for @entree.vin.producteur do |producteur| %> I guess that means the after_initialize callback doesn't act as I expect it. Is there something I'm missing? Also, I get the same error if I define a after_initialize method in the Vin model instead of definiing a callback.

  Read the article

• Pagination in a Rich Domain Model

  - by user246790

  I use rich domain model in my app. The basic ideas were taken there. For example I have User and Comment entities. They are defined as following: <?php class Model_User extends Model_Abstract { public function getComments() { /** * @var Model_Mapper_Db_Comment */ $mapper = $this->getMapper(); $commentsBlob = $mapper->getUserComments($this->getId()); return new Model_Collection_Comments($commentsBlob); } } class Model_Mapper_Db_Comment extends Model_Mapper_Db_Abstract { const TABLE_NAME = 'comments'; protected $_mapperTableName = self::TABLE_NAME; public function getUserComments($user_id) { $commentsBlob = $this->_getTable()->fetchAllByUserId((int)$user_id); return $commentsBlob->toArray(); } } class Model_Comment extends Model_Abstract { } ?> Mapper's getUserComments function simply returns something like: return $this->getTable->fetchAllByUserId($user_id) which is array. fetchAllByUserId accepts $count and $offset params, but I don't know to pass them from my Controller to this function through model without rewriting all the model code. So the question is how can I organize pagination through model data (getComments). Is there a "beatiful" method to get comments from 5 to 10, not all, as getComments returns by default.

  Read the article

• ASP.NET MVC Dropdownlist retain the selected value in the browser after post

  - by MLabib

  I build a drop down list in my aspx page as following <%= Html.DropDownList("SelectedRole", new SelectList((IEnumerable)Model.roles, "RoleId", "RoleName", Model.SelectedRole), "")%> it works fine for first Get and the first default value is selected; then I select item from the drop down list and submit the form. the controller bind the values correctly, public ActionResult About([Bind] Roles r) { //r.SelectedRole = the selected value in the page. //Roles r = new Roles(); r.roles = new List<Role>(); r.roles.Add(new Role(1, "one")); r.roles.Add(new Role(2, "two")); r.roles.Add(new Role(3, "three")); r.roles.Add(new Role(4, "four")); r.SelectedRole = null; return View(r) } Then I nullify the selected item and return my view, but still the previous selected Item is selected (although I did nullify it) Any Idea if I am doing something wrong or it is a bug in MVC? I am using ASP.NET MVC 1 Thanks

  Read the article

• Xcode: how to know a header file is actually imported?

  - by Philip007

  To be specific, I am using RestKit framework. I want to use a framework class category called RKObjectManager+RKTableController in my view controller mainTVC. Here is my #import section in mainTVC.m: // framework headers, which should be enough #import <RestKit/RestKit.h> #import <RestKit/UI.h> // my project headers, not relating to framework #import "MainTVC.h" #import "Photo.h" // Do this to guarantee import does happen. But still got error, see below #import <RestKit/RKObjectManager+RKTableController.h> However, Xcode issue an error: No known class method for selector 'fetchRequest:groupedBy:inContext:' For reference, this method is a class method declared only in category header RKObjectManager+RKTableController.h, but not in 'RKObjectManager.h`. Also, I added -ObjC and -all_load to "other linker flags" in build settings, if that's relevant. I suspect the error is caused by the fact that category header is not actually imported somehow. How can I verify that? Or the error is caused by other reasons that I am not aware of. What am I doing wrong?

  Read the article

• NHibernate.MappingException on table insertion.

  - by Suja

  The table structure is : The controller action to insert a row to table is public bool CreateInstnParts(string data) { IDictionary myInstnParts = DeserializeData(data); try { HSInstructionPart objInstnPartBO = new HSInstructionPart(); using (ISession session = Document.OpenSession()) { using (ITransaction transaction = session.BeginTransaction()) { objInstnPartBO.DocumentId = Convert.ToInt32(myInstnParts["documentId"]); objInstnPartBO.InstructionId = Convert.ToInt32(myInstnParts["instructionId"]); objInstnPartBO.PartListId = Convert.ToInt32(myInstnParts["part"]); objInstnPartBO.PartQuantity = Convert.ToInt32(myInstnParts["quantity"]); objInstnPartBO.IncPick = Convert.ToBoolean(myInstnParts["incpick"]); objInstnPartBO.IsTracked = Convert.ToBoolean(myInstnParts["istracked"]); objInstnPartBO.UpdatedBy = User.Identity.Name; objInstnPartBO.UpdatedAt = DateTime.Now; session.Save(objInstnPartBO); transaction.Commit(); } return true; } } catch (Exception ex) { Console.Write(ex.Message); return false; } } This is throwing an exception NHibernate.MappingException was caught Message="No persister for: Hexsolve.Data.BusinessObjects.HSInstructionPart" Source="NHibernate" StackTrace: at NHibernate.Impl.SessionFactoryImpl.GetEntityPersister(String entityName) at NHibernate.Impl.SessionImpl.GetEntityPersister(String entityName, Object obj) at NHibernate.Event.Default.AbstractSaveEventListener.SaveWithGeneratedId(Object entity, String entityName, Object anything, IEventSource source, Boolean requiresImmediateIdAccess) at NHibernate.Event.Default.DefaultSaveOrUpdateEventListener.SaveWithGeneratedOrRequestedId(SaveOrUpdateEvent event) at NHibernate.Event.Default.DefaultSaveEventListener.SaveWithGeneratedOrRequestedId(SaveOrUpdateEvent event) at NHibernate.Event.Default.DefaultSaveOrUpdateEventListener.EntityIsTransient(SaveOrUpdateEvent event) at NHibernate.Event.Default.DefaultSaveEventListener.PerformSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Event.Default.DefaultSaveOrUpdateEventListener.OnSaveOrUpdate(SaveOrUpdateEvent event) at NHibernate.Impl.SessionImpl.FireSave(SaveOrUpdateEvent event) at NHibernate.Impl.SessionImpl.Save(Object obj) at HexsolveMVC.Controllers.InstructionController.CreateInstnParts(String data) in F:\Project\HexsolveMVC\Controllers\InstructionController.cs:line 1342 InnerException: Can anyone help me solve this??

  Read the article

• JQuery AJAX returned too much data that I had not requested

  - by kwokwai

  Hi all, I am using CakePHP 1.26 and CDN JQuery in this URL: http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js In a HTML web page, I have these lines of code: $.ajax({ type: "POST", url: "http://mywebsite.com/controllers/avail/"+curl, success: function(data) { alert(data);} }); and in the PHP page, I got another few lines of code: function avail($uname){ $result1=$this->Site1->User->findByusername($uname); if($result1){ return 1; } else{ return 0; } } As you see, the Avail function will return either zero or one. But there was some redundant data returned from the server, what I saw in the Alert box was somthing like this (rather than 0 or 1): <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Missing Method in Controller</title> <meta http-equiv="content-type" content="text/html; charset=utf-8"> <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.min.js"></script> <style type="text/css"> /* CSS Document */ /*PAGE LAYOUT*/ 0

  Read the article

• Yii Framework Tutorial - file not found

  - by Heshan Perera

  I am in the process of learning the Yii Framework. I have been following this Tutorial. I have followed all the steps and have by index page loading. In my index.php page I point to two other pages located in protected/views/message The following is the code in my index.php located in the message folder mentioned above. <html> <body> <h1>Welcome</h1> <p> To view our message go to... <?php echo CHtml::link('Here', '/message/show')?> </p> <p> To edit our message go to... <?php echo CHtml::link('Here', '/message/edit')?> </p> </body> </html> "message" is the ID I gave when generating the model and controller through the yii shell application. The problem is, after the above page loads, and I click on any one of the above URLs, it points to "localhost:8080/message/show" and "localhost:8080/message/edit" , whereas the real location of these files is "localhost:8080/test/protected/views/message/..." What could I be doing wrong ?

  Read the article

• How can I change the tags/css class of some dynamic text based on output from a helper?

  - by Angela

  I have a repeated line which outputs something like: Call John Jones in -3 days (status) I have a helper called show_status(contact,email) which will output whether that particular email had been sent to that particular contact. If it is "sent," then that entire line should show up as "strike out." Similarly, if the number of days is -3 (<0), the line should be formatted in red. Here's my hack, but there must be a cleaner way to put the logic into the controller? I hard-code a value that wraps around the lines I want formatted, and assign the value based on a separate call to the same helper: <% for call in @campaign.calls %> <% if !show_call_status(@contact,call).blank? %> <%= strike_start = '<s>'%> <%= strike_end = '</s>' %> <% end %> <p> <%= strike_start %> <%= link_to call.title, call_path(call) %> on <%= (@contact.date_entered + call.days).to_s(:long) %> in <%= interval_email(@contact,call) %> days <%= make_call(@contact,call) %> <span class='status'><%= show_call_status(@contact,call) %></span> <%= strike_end %> </p> <% end %> I guess what I'd like to do is not have the if statement in the View. Not sure how to do this.

  Read the article

• Using entity framework to connect to multiple similar tables in .net MVC.

  - by Dite

  A relative newcomer to .net MVC2 and the entity framework, I am working on a project which requires a single web application, (C# .net 4), to connect to multiple different databases depending on the route of access, (ie subdomain). No problem with this in principle and all the logic is written to transform the subdomain into an entity connection and pass this through to the Entity Model. The problem comes with the fact that the different database whilst being largely similar in structure contain 3 or 4 unique tables bespoke to that instance. To my mind there are two ways to solve this issue, neither of which i am sure will be possible. 1/ Use a separate entity model for each database. -Attempts down this route have through up conflicts where table/sp names are the same across differnt db's, or implicit conversion errors when I try and put the different models in different namespaces. or 2/ Overwrite the classes which refer to the changeable database objects based on the value of a base controller property. -I have found nothing to suggest i can even do this. My question is if either of theser routes can ever work in principle or if i should just give up on the EF and connect to the dtabases directlky using ADO. Perhaps there is another way to solve this problem i haven't thought of? Thanks for any help...

  Read the article

• App is fast on 3GS but slow on 3G

  - by Anthony Chan

  Hi all, I'm new to computer coding and have just finished coding an app and tested it on both 3G and 3GS. On 3GS, it worked as normal as on the simulator. However, when I tried to run it on 3G, the app becomes extremely slow. I'm not sure what's the reason and I hope someone could shed some light on me. Generally, my app has a couple of view controller classes, with one of them being the title page, one being the main page, one is setting, etc. I used a dissolve to transition from the title page to the main page. But even this simple transition shows un-smooth performance on a 3G! My other part of the app involves zooming in to some images by scaling up the images, switching images by push or dissolve upon receiving touch events, saving photos into photo library and storing and retrieving some photos in a folder and some data in a SQlite database, each showing un-smooth actions. Compared with some heavy graphic or heavy maths app, I think mine is pretty simple. I totally have no clue why the app would behave so slow and un-smooth that it is barely useful on a 3G. Any help/ direction would be much appreciated. Thanks for helping out.

  Read the article

• setting the openCV configuration in an openGL project produce several errors

  - by GolSa

  I have a win32 solution which is set for openGL; it works well; but I want to write a function which use functions of openCV; I set the configuration for openCV for both X86 and X64;;I commented the openCV function and just to test the correctness of configuration, I run it; but when I want to run it on X64 I faced with the error below: Error 1 error C2065: 'GWL_HINSTANCE' : undeclared identifier D:\matrix\matrixProjection\src\ControllerMain.cpp 35 1 matrixProjection Error 2 error C2664: 'CreateDialogParamW' : cannot convert parameter 4 from 'BOOL (__cdecl *)(HWND,UINT,WPARAM,LPARAM)' to 'DLGPROC' D:\matrix\matrixProjection\src\DialogWindow.cpp 47 1 matrixProjection Error 2 points to this line of code: HWND DialogWindow::create() { /*-->this line*/ handle = ::CreateDialogParam(instance, MAKEINTRESOURCE(id), parentHandle, Win::dialogProcedure, (LPARAM)controller); return handle; } but on Debug Win32 configure, it runs; I used openGL32 in my project; is there any probability to be the cause? is there any X64 version for openGL? I know that there is something needed in X64 mode which my solution can not handle it; I googled a lot about it but I did not find any solution; How can I solve that?

  Read the article

• Trouble accessing data in relationships in Ember

  - by user3618430

  I'm having trouble saving data in this model relationship. My models are as follows: App.Flow = DS.Model.extend({ title: DS.attr('string'), content: DS.attr('string'), isCustom: DS.attr('boolean'), params: DS.hasMany('parameter', {async: true}) }); App.Parameter = DS.Model.extend({ flow: DS.belongsTo('flow'), param: DS.attr('string'), param_tooltip: DS.attr('string'), param_value: DS.attr('string') }); As you can see, I want Flows to have multiple Parameters. I have a rudimentary setup using Flow and Parameter fixtures, which behave as expected in the templates. However, when I try to create new ones in the controller, I have trouble setting the flow and parameter values correctly. var p = this.store.createRecord('parameter', { param: "foo", param_tooltip: "world", param_value: "hello" }); var f = this.store.createRecord('flow', { title: 'job', content: title, isCustom: true, params: [p] // doesn't seem to work }); f.set('params', [p]); // doesn't seem to work p.set('flow', f); // also doesn't seem to work // Save the new model p.save(); f.save(); I've tried a lot of solutions after staring at this and StackOverflow for a while (not just the ones listed). I'm not really sure what to try next. One thing that I noticed in the Ember inspector was that the ids of these created elements were not integers (they were something like the string 'fixture_0'), but I'm not really sure why that would be, whether its related, or how to fix it. Thanks!

  Read the article

• Why doesn't the SplitView iPhone template have a nib file for the RootView?

  - by Dr Dork

  I'm diving into iPad development and am learning a lot quickly, but everywhere I look, I have questions. After creating a new SplitView app in Xcode using the template, it generates the AppDelegate class, RootViewController class, and DetailViewController class. Along with that, it creates a .xib files for MainWinow.xib and DetailView.xib. How do these five files work together? Why is there a nib file for the DetailView, but not the RootView? When I double click on the MainWindow.xib file, Interface Builder launches without a "View" window, why? Below is the code for didFinishLaunchingWithOptions method inside the AppDelegate class. Why are we adding the splitViewController as a subview? (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions { // Override point for customization after app launch rootViewController.managedObjectContext = self.managedObjectContext; // Add the split view controller's view to the window and display. [window addSubview:splitViewController.view]; [window makeKeyAndVisible]; return YES; } Thanks so much in advance for all your help! I still have a lot to learn, so I apologize if this question is absurd in any way. I'm going to continue researching these questions right now!

  Read the article

• JSP JPA Form: how to insert value in a path variable

  - by kajarigd

  I have the following code snippet in a jsp file: <hr> <form:form commandName="newTicketSale" id="reg" action="transactionResult.htm"> <h3>Buy Movie Tickets:</h3> <form:label path="movieName">Movie Name:</form:label> <form:input path="movieName" /> <form:errors class="invalid" path="movieName" /> <form:label path="ticketPrice">Ticket Price:</form:label> <form:input path="ticketPrice" /> <form:errors class="invalid" path="ticketPrice" /> <input type="submit"> <br><br> </form:form> I am using JPA tags in this jsp. Now, in the commandName "newTicketSale" there is another parameter called userId. In the jsp file itself I need to insert value ${name} in userId, so that in the Controller file when I am doing @Valid @ModelAttribute("newTicketSale") MovieTicket newTicket I can retrieve the value ${name} when I am doing newTicket.getUserId(). I don't know how to do this. Please help! Thanks in advance!

  Read the article

• Abstracting the interpretation of MVC checkboxes values received by the FormsCollection object

  - by Simon_Weaver

  In ASP.NET MVC a checkbox is generated by the HtmlHelper code here: <%= Html.CheckBox("List_" + mailingList.Key, true) %> as this HTML: <input id="List_NEW_PRODUCTS" name="List_NEW_PRODUCTS" type="checkbox" value="true" /> <input name="List_NEW_PRODUCTS" type="hidden" value="false" /> In case you're wondering why is there an extra hidden field? - then read this. Its definitely a solution that makes you first think 'hmmmmm' but then you realize its a pretty elegant one. The problem I have is when I'm trying to parse the data on the backend. Well its not so much of a problem as a concern if anything in future were to change in the framework. If I'm using the built in binding everything is great - its all done for me. But in my case I'm dynamically generating checkboxes with unknown names and no corresponding properties in my model. So i end up having to write code like this : if (forms["List_RETAIL_NOTIFICATION"] == "true,false") { } or this: if (forms.GetValues("List_RETAIL_NOTIFICATION")[0] == "true") { } Both of which i still look at and cringe - especially since theres no guarantee this will always be the return value. I'm wondering if theres a way to access the layer of abstraction used by the model binders - or if I'm stuck with my controller 'knowing' this much about HTTP POST hacks. Yes I'm maybe being a little picky - but perhaps theres a better clever way using the model binders that I can employ to read dynamically created checkbox parameters. In addition i was hoping this this post might help others searcheing for : "true,false". Even though I knew why it does this I just forgot and it took me a little while to realize 'duh'. FYI: I tried another few things, and this is what I found : forms["List_RETAIL_NOTIFICATION"] evaluates to "true,false" forms.GetValues("List_RETAIL_NOTIFICATION")[0] evaluates to "true" (forms.GetValue("List_RETAIL_NOTIFICATION").RawValue as string[])[0] evaluates to "true" forms.GetValues("List_RETAIL_NOTIFICATION").FirstOrDefault() evaluates to "true"

  Read the article

• Custom UITableView headerView disappears after memory warning

  - by psychotik

  I have a UITableViewController. I create a custom headerView for it's tableView in the loadView method like so: (void)loadView { [super loadView]; UIView* containerView = [[UIView alloc] initWithFrame:CGRectMake(0, 0, width, height * 2 )]; containerView.tag = 'cont'; containerView.autoresizingMask = UIViewAutoresizingFlexibleLeftMargin | UIViewAutoresizingFlexibleRightMargin | UIViewAutoresizingFlexibleWidth | UIViewAutoresizingFlexibleTopMargin; UIButton* button = [UIButton buttonWithType:UIButtonTypeCustom]; button.frame = CGRectMake(padding, height, width, height); ... //configure UIButton and events UIImageView* imageView = [[UIImageView alloc] initWithImage:[UIImage imageNamed:@"image.png"] highlightedImage:[UIImage imageNamed:@"highlight.png"]]; imageView.frame = CGRectMake(0, 0, width, height ); ... //configure UIImageView [containerView addSubview:button]; [containerView addSubview:imageView]; self.tableView.tableHeaderView = containerView; [imageView release]; [containerView release]; } None of the other methods (viewDidLoad/Unload, etc) are overloaded. This controller is hosted in a tab. When I switch to another tab and simulate a memory warning, and then come back to this tab, my UITableView is missing my custon header. All the rows/section are visible as I would expect. Putting a BP in the loadView code above, I see it being invoked when I switch back to the tab after the memory warning, and yet I can't actually see the header. Any ideas about what I'm missing here? EDIT: This happens on the device and the simulator. On the device, I just let a memory warning occur by opening a bunch of different apps while mine is in the background.

  Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >