Search Results

Search found 45752 results on 1831 pages for 'ubuntu linux'.

Page 370/1831 | < Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >

  • Is Subversion(SVN) supported on Ubuntu 10.04 LTS 32bit?

    - by Chad
    I've setup subversion on Ubuntu 10.04, but can't get authentication to work. I believe all my config files are setup correctly, However I keep getting prompted for credentials on a SVN CHECKOUT. Like there is an issue with apache2 talking to svnserve. If I allow anonymous access checkout works fine. Does anybody know if there is a known issue with subversion and 10.04 or see a error in my configuration? below is my configuration: # fresh install of Ubuntu 10.04 LTS 32bit sudo apt-get install apache2 apache2-utils -y sudo apt-get install subversion libapache2-svn subversion-tools -y sudo mkdir /svn sudo svnadmin create /svn/DataTeam sudo svnadmin create /svn/ReportingTeam #Setup the svn config file sudo vi /etc/apache2/mods-available/dav_svn.conf #replace file with the following. <Location /svn> DAV svn SVNParentPath /svn/ AuthType Basic AuthName "Subversion Server" AuthUserFile /etc/apache2/dav_svn.passwd Require valid-user AuthzSVNAccessFile /etc/apache2/svn_acl </Location> sudo touch /etc/apache2/svn_acl #replace file with the following. [groups] dba_group = tom, jerry report_group = tom [DataTeam:/] @dba_group = rw [ReportingTeam:/] @report_group = rw #Start/Stop subversion automatically sudo /etc/init.d/apache2 restart cd /etc/init.d/ sudo touch subversion sudo cat 'svnserve -d -r /svn' > svnserve sudo cat '/etc/init.d/apache2 restart' >> svnserve sudo chmod +x svnserve sudo update-rc.d svnserve defaults #Add svn users sudo htpasswd -cpb /etc/apache2/dav_svn.passwd tom tom sudo htpasswd -pb /etc/apache2/dav_svn.passwd jerry jerry #Test by performing a checkout sudo svnserve -d -r /svn sudo /etc/init.d/apache2 restart svn checkout http://127.0.0.1/svn/DataTeam /tmp/DataTeam

    Read the article

  • Is it possible/practical to install and run Linux on a USB flash drive?

    - by Graeme Donaldson
    I'm going to replace my old 2004 vintage desktop PC soon and I have an idea of what I want to do, I'm just not sure if it's possible or realistic. In the time since I built the old PC it has slowly become less used as a PC and more as a file server, so I figured I'd build a small file server which could also function as a router/DHCP/DNS/whatever box. The idea is to base it on an Atom system. I have my eye on the Intel D510MO for the moment. This supports 2 SATA disks, and I'd prefer to dedicate those to data storage. I'd like to install Ubuntu Server or maybe Debian on a 8/16GB USB flash drive. I have seen plenty of tutorials on how to perform an installation from a USB drive, but I can't seem to find any info on actually booting and running the OS from USB flash. Is this even possible? Is it practical? This box will mostly be used for: Making backups of mine and my wife's notebooks via LAN. Will use SMB or NFS for this. Digital media storage, which will be accessed by a Mede8er box with no storage of its own. I will most likely use NFS for this.

    Read the article

  • Why is my filesystem being mounted read-only in linux?

    - by Tim
    I am trying to set up a small linux system based on Gentoo on a VirtualBox machine, as a step towards deploying the same system onto a low-spec Single Board Computer. For some reason, my filesystem is being mounted read-only. In my /etc/fstab, I have: /dev/sda1 / ext3 defaults 0 0 none /proc proc defaults 0 0 none /sys sysfs defaults 0 0 none /dev/shm tmpfs defaults 0 0 However, once booted /proc/mounts shows rootfs / rootfs rw 0 0 /dev/root / ext3 ro,relatime,errors=continue,barrier=0,data=writeback 0 0 proc /proc proc rw,nosuid,nodev,noexec,relatime 0 0 sysfs /sys sysfs rw,nosuid,nodev,noexec,relatime 0 0 udev /dev tmpfs rw,nosuid,relatime,size=10240k,mode=755 0 0 devpts /dev/pts devpts rw,nosuid,noexec,relatime,gid=5,mode=620 0 0 none /dev/shm tmpfs rw,relatime 0 0 usbfs /proc/bus/usb usbfs rw,nosuid,noexec,relatime,devgid=85,devmode=664 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime 0 0 (the above may contain errors: there's no practical way to copy and paste) The partition at /dev/hda1 is clearly being mounted OK, since I can read all the data, but it's not being mounted as described in fstab. How might I go about diagnosing / resolving this? Edit: I can remount with mount -o remount,rw / and it works as expected, except that /proc/mounts reports /dev/root mounted at / rather than /dev/sda1 as I'd expect. If I try to remount with mount -a I get mount: none already mounted or /sys busy mount: according to mtab, sysfs is already mounted on /sys Edit 2: I resolved the problem with mount -a (the same error was occuring during startup, it turned out) by changing the sysfs and proc lines to proc /proc proc [...] sysfs /sys sysfs [...] Now mount -a doesn't complain, but it doesn't result in a read-write root partition. mount -o remount / does cause the root partition to be remounted, however.

    Read the article

  • Enable re-attached mouse/keyboard via ssh?!

    - by aidan
    I had Ubuntu 9.10 x64 Desktop installed on a nettop I have (that I normally run headless), and yesterday I decided to take the plunge and update to 10.04. So, I plugged in a screen and usb mouse/keyboard, booted up and set to work. It was 1am, and it was telling me it had 3hrs left to install all the new packages, so I unplugged the screen and usb mouse/keyboard, left the box running, and went to bed. This evening, I plugged it all back in again to check progress. It's asking if I want to remove obsolete packages. I do, but neither the mouse nor keyboard work! I can access the box via SSH like I normally do; is there any way I can re-enable the keyboard from there? I'm reluctant to restart the box (via ssh) mid-way through such a complicated upgrade. Thanks for any help! lsusb (with wireless mouse/keyboard receiver unplugged): Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub lsusb (with wireless mouse/keyboard receiver attached): Bus 004 Device 005: ID 045e:005f Microsoft Corp. Wireless MultiMedia Keyboard Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

    Read the article

  • Simple Linux program that takes any HTTP/HTTPS request and returns a single page?

    - by ultrasawblade
    I have a Linux box operating as router. There's a NIC that's connected to the internet (WAN), a NIC connected to an 8-port GbE switch (LAN), and a NIC connected to a Linksys wireless N-router (WLAN). Routing between everything is working perfectly. I have security completely disabled on the wireless router, but the WLAN NIC is firewalled such that it will only accept DNS queries and PPTP VPN connections. Currently HTTP/HTTPS traffic and everything else is blocked. I would like to run something that listens on port 80/443 of the WLAN NIC, and, for non VPN'ed connections, given any HTTP/HTTPS request it will return a single webpage saying "Unauthenticated" and explain how to sign into the VPN. A transparent proxy seems to be what I need, but my searches all seem to direct me to Squid, which is already running on my server and seems overkill for this simple task. Is there a simpler, lightweight program out there that does just this or should I just suck it up and run two instances of Squid (or figure out how to configure it)? Or, is this entire VPN thing I'm doing complete nonsense and I should just enable encryption on the wireless router?

    Read the article

  • How can I set the CD audio volume in Linux?

    - by user1296362
    In Windows 7 Control Panel - Sound - Sound Properties window there's an slider for setting CD Audio volume: And it's pretty strange that I can't find corresponding one in generic Linux mixers: alsamixer or amixer. I connected a CD drive to try to set CD audio volume with cdcd (CD Player): $ cdcd setvol 0 Invalid volume It isn't actually an invalid volume, it is because ioctl() call fails. I found that out after searching and changing a bit the source code of this utility (in the libcdaudio): --- cdaudio.c.orig 2004-09-09 06:26:20.000000000 +0600 +++ cdaudio.c 2012-05-30 21:34:34.167915521 +0600 @@ -578,8 +578,10 @@ cdvol_data.CDVOLCTRL_BACK_RIGHT_SELECT = CDAUDIO_MAX_VOLUME; #endif - if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) - return -1; + if(ioctl(cd_desc, CDAUDIO_SET_VOLUME, &cdvol) < 0) { + printf("*** cd_set_volume: ioctl() returned error\n"); + return -1; + } return 0; } By the way cdcd's get volume command yields rather weird output: Left Right Front 1281734864 32767 Back 0 0 Also I tried aumix: $ aumix -c 0 But all with no success. I read from this manual — http://tldp.org/HOWTO/Alsa-sound-6.html (section 6.2 The mixer) that CD channel can present in amixer output. Maybe some drivers for sound card are missing in my Ubuntu 12.04 LTS installation. Though I don't think it's the case: $ lsmod | grep snd snd_mixer_oss 22602 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 223867 1 snd_hda_intel 33773 4 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq snd 78855 19 snd_mixer_oss,snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep ,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 15091 1 snd snd_page_alloc 18529 2 snd_hda_intel,snd_pcm All I need is just mute or set to 0 volume level of CD Audio channel, like I did in Windows 7, to get rid of sibilant noise in the speakers.

    Read the article

  • Is it possible to boot Windows 7 from when you're harddrive's partition with two OSes?

    - by Muhammad
    I have a PC with a hard drive that's partition into home directories for Windows 7 and Ubuntu. I primarily use Windows 7 and occasionally (once a week) use Ubuntu. When I boot up my computer, I usually get taken to a boot menu that includes about 5 different options: 3 are for Ubuntu's configurations, one's for swap, and the forth is for Windows 7. Then after I select Windows 7 or Ubuntu from this menu, I get taken to another menu that again asks me for Windows 7 or Ubuntu. This time, there's only 2 options, Windows 7 and Ubuntu. [Side note: out of experience I realized most boot menus are timed and so are these.] So if I ever turn my computer on without actually sitting in front of it for a few minutes, it boots into Ubuntu. I'm trying to figure out what I need to do so I can first get rid of the 2 boot menus. And if possible, I'm looking for help changing my boot options where I can load up Windows 7 (even with the boot menu wait of about 30 seconds). My harddrive's partition's laid out like this: Windows 7 (C partition) Multimedia (D partition, I just use this for backup/non-OS stuff) Ubuntu (home directory) Swap Is there any other information I need to provide?

    Read the article

  • How do I set up a Windows NFS share so that I can view it's contents on Linux?

    - by hewhocutsdown
    My NFS server is a Windows XP SP3 box with the Microsoft Windows Services for Unix installed. I have a share configured under C:\NFS with the share name NFS and ANSI encoding. Anonymous access is enabled, with the anon UID/GID set to 0/0. Additionally, I've set ALL MACHINES to Read-Write, and checked the checkbox to Allow root access. My first NFS client is a Ubuntu 10.04 box, with nfs-common installed. Running sudo mount -t nfs 1.1.1.1:/NFS /home/user/NFS succeeds, but when I attempt to view the folder (even as root), it tells me that I do not have the permissions necessary to view the contents of the folder. My second NFS client is an IBM iSeries box running OS/400 V5R3. I used the mount command below: MOUNT TYPE(*NFS) MFS('1.1.1.1:/NFS') MNTOVRDIR('/PARENT/NFS') OPTIONS('rw,nosuid,retry=5,rsize=8096,wsize=8096,timeo=20,retrans=2,acregmin=30,acregmax=60,acdirmin=30,acdirmax=60,soft') CODEPAGE(*BINARY *ASCII) which also mounts successfully. Attempting to WRKLNK '/PARENT/NFS' and use Option 5 to enter the directory yields a Not authorized to object error - even though I am a security officer with the *ALLOBJ special authority. My gut says that it's a problem with the Windows share, but I don't know what it could be. Do you have any suggestions?

    Read the article

  • How do I set up a shared directory on Linux?

    - by JR Lawhorne
    I have a linux server I want to use to share files between users in my company. Users will access the machine with sftp or secure shell. Here is what I have: cd /home ls -l drwxrwsr-x 5 userA staff 4096 Jul 22 15:00 shared (other listings omitted) I want all users in the staff group to be able to create, modify, delete any file and/or directory in the shared folder. I don't want anyone else to have access to the folder at all. I have: Added the users to the staff group by modifying /etc/group and running grpconv to update /etc/gshadow Run chown -R userA.staff /home/shared Run chmod -R 2775 /home/shared Now, users in the staff group can create new files but they aren't allowed to open the existing files in the directory for edit. I suspect this is due to the primary group id associated with each user which is still set to be the group created when the user was created. So, the PGID of user 'userA' is 'userA'. I'd rather not change the primary group of the users to 'staff' if I can help it but if it is the easiest option, I would consider it. And, a variation on a theme, I'd like to do this same thing with another directory but also allow the apache user to read files in the directory and serve them. What's the best way to set this up?

    Read the article

  • Why java -version returning a different version than the one defined in JAVA_HOME?

    - by Shekhar
    I am trying to set JAVA_HOME in Ubuntu OS. I have copied jdk 1.7 in /usr/lib/jvm and set JAVA_HOME in /etc/profile file. Contents of /usr/lib/jvm folder are as follows : shekhar@ubuntu:~$ ls /usr/lib/jvm/ default-java java-1.6.0-openjdk java-6-openjdk java-6-openjdk-i386 jdk1.7.0_01 java-1.5.0-gcj-4.6 java-1.6.0-openjdk-i386 java-6-openjdk-common java-7-openjdk-i386 and last few lines of /etc/profile file are as follows : export JAVA_HOME=/usr/lib/jvm/jdk1.7.0_01 export PATH=$PATH:$JAVA_HOME/bin After finishing all this when I run java -version command I get following output : shekhar@ubuntu:~$ java -version java version "1.6.0_24" OpenJDK Runtime Environment (IcedTea6 1.11.4) (6b24-1.11.4-1ubuntu0.12.04.1) OpenJDK Server VM (build 20.0-b12, mixed mode) and when I run ls -lah command I get following output : shekhar@ubuntu:~$ ls -lah /usr/bin/java lrwxrwxrwx 1 root root 22 Sep 29 09:58 /usr/bin/java -> /etc/alternatives/java shekhar@ubuntu:~$ ls -lah /etc/alternatives/java lrwxrwxrwx 1 root root 45 Sep 29 09:58 /etc/alternatives/java -> /usr/lib/jvm/java-6-openjdk-i386/jre/bin/java Can anyone please tell me which thing I am missing? Why Ubuntu is still pointing to open jdk and not to my jdk 7? PS : I have seen this similar question and its answers but that question is related to Windows OS and not for Ubuntu so I am reposting this similar question for Ubuntu.

    Read the article

  • How to determine the root cause of a system lockup on Ubuntu 8.04 LTS?

    - by jdt141
    I'm currently working a project that involves setting up a PC/104 stack and running Ubuntu 8.04 LTS. We need to use the PC/104 stack because its an embedded application - and we're required to use a DeviceNet peripheral card to communicate to other devices. (DeviceNet is just a protocol on top of CAN.) Anyway, the following hardware is on the stack: Kontron MOPSPM104 with a 1GHz Intel Celeron processor ConnectTech FlashDrive/104 4GB Industrial Temp (-40 to +85 C) Woodhead (Molex) PC104DVNIO DeviceNet card A run of the mill 104 power supply The Kontron Board offers two serial ports, one VGA out, and two USB ports. The DeviceNet card is an ISA card. Because of this (per the User's Guide for the Kontron Board), I have manually set the IRQs in the BIOS to be appropriately configured, and turned off ACPI in both the BIOS and passed the appropriate flag in GRUB. I've installed Ubuntu 8.04 desktop, 32 bit. The problem that I'm having is that, from time to time, the entire 104 stack locks up. This only seems to happen in two cases, both of which we're running GNOME. We have a custom application that uses the DeviceNet card, and the system will lock up, or (more frequently) when we're running Firefox and either surfing for some information or trying to test it - typically by streaming video from a IP-camera. The reason I ask this questions is I cannot determine the root cause of this lockup. The IRQs appear to correctly configured in the BIOS and as the Kernel sees them, and nothing is logged to dmesg. If you all could help me determine the root cause of this lockup, I would greatly appreciate it. Thanks.

    Read the article

  • Error when installing wubi on windows 7

    - by P'sao
    Im installing ubuntu on windows 7(wubi 11.10): when its nearly done it gives me this error in the log file: Usage: /cygdrive/c/Users/Psao/AppData/Local/Temp/pyl10D2.tmp/bin/resize2fs.exe -f C:/ubuntu/disks/root.disk 17744M [-d debug_flags] [-f] [-F] [-p] device [new_size] Traceback (most recent call last): File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 461, in expand_diskimage File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Users\P'sao\AppData\Local\Temp\pyl10D2.tmp\bin\resize2fs.exe -f C:\ubuntu\disks\root.disk 17744M >>retval=1 >>stderr= >>stdout=resize2fs 1.40.6 (09-Feb-2008) Usage: /cygdrive/c/Users/Psao/AppData/Local/Temp/pyl10D2.tmp/bin/resize2fs.exe -f C:/ubuntu/disks/root.disk 17744M [-d debug_flags] [-f] [-F] [-p] device [new_size] 10-25 20:31 DEBUG TaskList: # Cancelling tasklist 10-25 20:31 DEBUG TaskList: # Finished tasklist 10-25 20:31 ERROR root: Error executing command >>command=C:\Users\P'sao\AppData\Local\Temp\pyl10D2.tmp\bin\resize2fs.exe -f C:\ubuntu\disks\root.disk 17744M >>retval=1 >>stderr= >>stdout=resize2fs 1.40.6 (09-Feb-2008) Usage: /cygdrive/c/Users/Psao/AppData/Local/Temp/pyl10D2.tmp/bin/resize2fs.exe -f C:/ubuntu/disks/root.disk 17744M [-d debug_flags] [-f] [-F] [-p] device [new_size] Traceback (most recent call last): File "\lib\wubi\application.py", line 58, in run File "\lib\wubi\application.py", line 132, in select_task File "\lib\wubi\application.py", line 158, in run_installer File "\lib\wubi\backends\common\tasklist.py", line 197, in __call__ File "\lib\wubi\backends\win32\backend.py", line 461, in expand_diskimage File "\lib\wubi\backends\common\utils.py", line 66, in run_command Exception: Error executing command >>command=C:\Users\P'sao\AppData\Local\Temp\pyl10D2.tmp\bin\resize2fs.exe -f C:\ubuntu\disks\root.disk 17744M >>retval=1 >>stderr= >>stdout=resize2fs 1.40.6 (09-Feb-2008) Usage: /cygdrive/c/Users/Psao/AppData/Local/Temp/pyl10D2.tmp/bin/resize2fs.exe -f C:/ubuntu/disks/root.disk 17744M [-d debug_flags] [-f] [-F] [-p] device [new_size] can some one help me?

    Read the article

  • Ubuntu networking issue: two specific machines cannot browse web while connected to network at the same time.

    - by jensendarren
    I have setup a secure wireless network which works very well except for two laptops running Ubuntu 10.10 that can't access the Internet via a browser at the same time. They can both ping sites, wget sites, use skype but when using a browser the page never loads (in Firefox the status bar just sits there saying "Connecting" until it times out.) Here is what we have tried so far (nothing has fixed this issue): OpenDNS Restart networking services Using wired connection rather than wireless Removing all other nodes from the network except the two machines that have this issue Swapped out the router Factory reset the router Reformatted one of the machines and re-installed Ubuntu 10.10 Other things that we have checked: The two machines can connect simultaneously without any issues to other wireless networks in different locations (say in an Internet Cafe or another office) The two machines have unique IP addresses The two machines have unique MAC addresses The two machines can communicate on the network using Skype, wget, ping etc We are not using a proxy on either machine FYI: I have attached output from wireshark. For the test we turned both machines on and pointed them both to the same website. The content loaded on one and not the other. Here is the output from wireshark- (speedyshare.com/files/26228631/machine_output_1 && speedyshare.com/files/26228649/machine2). As you can see the first one worked, the second one didn't. I don't fully understand the output and would appreciate if someone could shed some light on what might be causing this and how we can fix it! Many thanks! Darren

    Read the article

  • Backup solution to backup terabytes and lots of static files on linux server?

    - by user28679
    Which backup tool or solution would you use to backup terabytes and lots of files on a production linux server ? Note that the files are all different and almost never modified, and usage is mostly adding files, so data volume is today 3TB growing all the time at around +15GB/day. Please do not reply rsync. Basic unix tools are not enough, rsync does not keep history, rdiff-backup miserably fails from time to time and screw the history. Moreover these are all file based backup, which put a lot of IOwait just to browse directories and query stat(). But i guess, except R1Soft CDP, there is no way around that. We tried R1Soft CDP backup, which is block level backup, and it proved good and efficient for all our other servers, but systematically fails on the server with 3 terabytes and gazillions of files. That is already more than 2 months that the engineers of R1Soft and datacenter are playing a hot ball game... and still no backup except regular rsync We never tried big commercial solutions, except R1Soft CDP since it was provided as an optional service by the datacented hosting our servers.

    Read the article

  • Is there any way to force my Linux box to always boot up with a self-assigned IP address?

    - by Jeremy Friesner
    This is perhaps an unusual request: I'm trying to get a Debian Linux box to always give itself a self-assigned IP address (i.e. 169.254.x.y) on boot. In particular, I want it to do that even when there is a DHCP server present on the LAN. That is, it should not request an IP address from the DHCP server. From what I can see in the "man interfaces" text, there is an option for "manual", and an option for "dhcp". Manual assignment won't do, since I need multiple boxes to work on the same LAN without requiring any manual configuration... and "dhcp" does what I want, but only if there is no DHCP server on the LAN. (A requirement is that the functionality of these boxes should not be affected by the presence or absence of a DHCP server). Is there a trick that I can use to get this behavior? EDIT: By "no manual configuration", I mean that I should be able to take this box (headless) to any LAN anywhere, plug in the Ethernet cable, and have it do its thing. I shouldn't have to ssh to the box and edit files to get it working each time it is moved to a different LAN.

    Read the article

  • What is proper relationship between /etc/hosts and DNS A records for a Linux server?

    - by MountainX
    I have an Ubuntu server. It is going to be a web server with a URI of www.example.com. I have a DNS A record pointing www.example.com to the server's IP address. Let's say I pick "trinity" as the hostname for this server. I want to set up the DNS records correctly. I need reverse DNS to www.example.com, so a CNAME for www.example.com doesn't seem appropriate. Here's my question: Is it considered best practice to set up two DNS records (which in my case would likely be two A records), one for www.example.com and one for trinity.example.com, both pointing to this server's IP address? (Or, even if it is not accepted as a best practice, is it a good idea?) If so, would the following be a proper /etc/hosts file? $ cat /etc/hosts 127.0.1.1 trinity.local trinity 99.100.101.102 trinity.example.com trinity www.example.com This server is a Linode and Linode's docs seem to imply that the above approach is best (if I am reading them correctly). Here's the relevant section. I bolded the line that seems to apply here. Update /etc/hosts Next, edit your /etc/hosts file to resemble the following example, replacing "plato" with your chosen hostname, "example.com" with your system's domain name, and "12.34.56.78" with your system's IP address. As with the hostname, the domain name part of your FQDN does not necesarily need to have any relationship to websites or other services hosted on the server (although it may if you wish). As an example, you might host "www.something.com" on your server, but the system's FQDN might be "mars.somethingelse.com." File:/etc/hosts 127.0.0.1 localhost.localdomain localhost 12.34.56.78 plato.example.com plato The value you assign as your system's FQDN should have an "A" record in DNS pointing to your Linode's IP address. For more information on configuring DNS, please see our guide on configuring DNS with the Linode Manager.

    Read the article

  • Tools required for a Web Development Project..

    - by RBA
    Hi, I wanted to design a project in linux which could contain programming languages(C, perl, PHP, HTML, XML etc) basically a web based project. Why i have chosen to build on Linux is because it is Open Source, and lot many things can be automated through scripting languages, which in windows i don't know. So, i have installed linux on a virtual machine(Host-Windows 2007 & Guest Linux CentOS), CentOS(command line interface). Since i am a beginner, so I want to know what all tools can be used to facilitate and ease my development process. Some which i know are listed below, and request you to please share your experience on this. 1) Using Putty so that can access the Linux machine from anywhere within the network. 2) Since i want to develop on Linux, but want to use windows as developing platform. So have downloaded Eclipse Editor (C/PHP) on windows. But want to know how can i access linux files from here?? 3) Installed Samba, and still trying to figure out how can i access linux files remotely on Windows. 4) Please share your experience, as how can i ease my development process. and what all tools i can use..?? Please let me know if you need any other clarification..

    Read the article

  • Recommended programming language for linux server management and web ui integration.

    - by Brendan Martens
    I am interested in making an in house web ui to ease some of the management tasks I face with administrating many servers; think Canonical's Landscape. This means doing things like, applying package updates simultaneously across servers, perhaps installing a custom .deb (I use ubuntu/debian.) Reviewing server logs, executing custom scripts, viewing status information for all my servers. I hope to be able to reuse existing command line tools instead of rewriting the exact same operations in a different language myself. I really want to develop something that allows me to continue managing on the ssh level but offers the power of a web interface for easily applying the same infrastructure wide changes. They should not be mutually exclusive. What are some recommended programming languages to use for doing this kind of development and tying it into a web ui? Why do you recommend the language(s) you do? I am not an experienced programmer, but view this as an opportunity to scratch some of my own itches as well as become a better programmer. I do not care specifically if one language is harder than another, but am more interested in picking the best tools for the job from the beginning. Feel free to recommend any existing projects except Landscape (not free,) Ebox (not entirely free, and more than I am looking for,) and webmin (I don't like it, feels clunky and does not integrate well with the "debian way" of maintaining a server, imo.) Thanks for any ideas!

    Read the article

  • Installing 64-bit Ubuntu Server 12.04 LTS, on a VM with VMWare Player, on a 64-bit Windows 7 PC

    - by WannaBeAGeek
    I'm trying to create a VM, using VMWare Player, with an ISO image of Ubuntu Server 12.04 (LTS). The machine I'm doing the installation on has an Intel(R) Core(TM) i5 CPU, and runs 64-bit Windows 7 I managed to create the VM (gave username, password, configured network etc), but I can't install Ubuntu Server. First I get this alert : Binary translation is incompatible with long mode on this platform. Disabling long mode. Without long mode support, the virtual machine will not be able to run 64-bit code. For more details see http://vmware.com/info?id=152. When I click OK, I get another alert : This virtual machine is configured for 64-bit guest operating systems. However, 64-bit operation is not possible. This host supports Intel VT-x, but Intel VT-x is disabled. Intel VT-x might be disabled if it has been disabled in the BIOS/firmware settings or the host has not been power-cycled since changing this setting. (1) Verify that the BIOS/firmware settings enable Intel VT-x and disable 'trusted execution.' (2) Power-cycle the host if either of these BIOS/firmware settings have been changed. (3) Power-cycle the host if you have not done so since installing VMware Player. (4) Update the host's BIOS/firmware to the latest version. For more detailed information, see http://vmware.com/info?id=152. Then, when I click OK, my VM exists, and I get back to the VMWare Player home screen. I don't know much about hardware and virtualisation, so there might be some necessary info I'm not giving. Please don't hesitate to let me know what is missing in my post, for finding solutions. Thanks :)

    Read the article

  • Backup files from Linux client to Windows Server

    - by Andrew
    I'm trying to backup my files from my Linux box to my Windows Server 2008 as a push, and when I delete them from my Linux box, they remain on my Windows Server. I've found lots of sources that are similar, but most results were from Windows to Linux. I managed to find slightly more similar cases like Using rsync and cygwin to Sync Files from a Linux Server to a Windows Notebook PC, and rsync from Windows PC to remote Linux server, with the most similar being a backup from Linux to Windows Server, but through a pull from the Windows Server. Initially, I used Unison because I thought having the 2-way capability would come in handy, and I would just have to set some configurations to make it 1-way. Unfortunately, I couldn't find the right configuration, and only managed to synchronize using the command unison "profile" -ui text -auto -silent. When I deleted the files on my Linux box, the files in the Server got deleted too, which of course, isn't what I want. When I tried to find any options for Unison, I only discovered the -force option, which didn't help, since what I wanted was an incremental update to the Server. I found out I could achieve this from using rsync and the -a option (archive), which would keep adding files even if I deleted them from my Linux box. I installed Cygwin on my Windows Server, configured an SSH daemon, but I can't seem to get it working. I've also already configured Windows Firewall to open port 22 (both inbound and outbound). I used the following command from my Linux box: rsync -avrzn /folder/to/be/backed/up/ [email protected]:/cygdrive/c/place/to/store/backed/up/files (a - archive, v - verbose, r - recurse into subdirectories, z - compress, n - dryrun) but it just won't work. Can anyone help me out? I don't mind using either Unison or rsync, as long as it achieves what I want.

    Read the article

  • What's the mysql-5.5 compilation configuration arguments on Ubuntu 10.04?

    - by photon
    I want to install mysql 5.5 on my Ubuntu10.04 desktop system. But I'm not sure what arguments I should use after the cmake command. Though I've seen these articles: https://wikis.oracle.com/display/mysql/Cmake Building mysql-5.5.19 from source on ubuntu 11.10 with the static flag Compile MySQL 5.5.15 from source using autorun.sh and cmake, unable to start MySQL after Would anyone like to share the mysql-5.5 configuration arguments of compilation on Ubuntu 10.04? $cmake # what arguments to enter for this command update: cmake . -DBUILD_CONFIG=mysql_release -DCMAKE_INSTALL_PREFIX=/path/to/mysql_installation_dir -DWITH_SSL=no the official web site says it need to use cmake to compile the source package, but according to a teck blog, it doesn't need to compile the source, so which one is correct? When I use Cmake, I also had following error message: $ sudo cmake . -DBUILD_CONFIG=mysql_release -DCMAKE_INSTALL_PREFIX=/usr/local/mysql_community_5.5 -- The CXX compiler identification is unknown CMake Error: your CXX compiler: "CMAKE_CXX_COMPILER-NOTFOUND" was not found. Please set CMAKE_CXX_COMPILER to a valid compiler path or name. CMake Error at cmake/build_configurations/mysql_release.cmake:126 (MESSAGE): Clarification: I'm not clever and I'm a slow-thinking guy. And I cannot find a clever guy around me to give me some useful help. So I come here and hope someone is kind and generous enough to take the time to post the details.

    Read the article

  • SSD as primary or secondary drive on a small Linux server?

    - by Alex Martelli
    I'm pensioning off my 10-years-old home server and replacing it with an Ubuntu 10.04 box. The two storage devices are a Western Digital Caviar Green 2.0TB HD and an Intel X25-M 34nm Gen 2 80GB SATA II 2.5inch SSD (the box has 8GB RAM and an i5 750, if it matters). I don't care much about boot times (since I don't plan to reboot all that often;-); the main frequent, performance-demanding task will be (re)building large open source C or C++ software packages from sources (as an open source contributor, I do that often). So, I thought I'd keep the SSD as the secondary drive and the HD as the primary one, using the SSD mostly for the files that can otherwise demand a lot of seeking (esp. in a parallel make). However, the friendly vendor (perhaps more experienced in Windows systems than in Linux ones) thinks the "normal" way to configure the machine would be with the SSD as the primary drive. I'm pretty rusty on configuring and tuning systems, so, I thought I'd better double check on SuperUser... thanks in advance for advice about this choice!

    Read the article

  • Migrating from one linux install to another: How to keep the second disk around?

    - by Jim Miller
    I've got a linux box running Fedora 19 that I want to move to CentOS 6.4. Rather than trying to do something fancy with the current disk (which has also accumulated a lot of sludge over the years), I'm going to get a new disk, put CentOS on that, and then move the to-be-preserved bits of stuff from the old disk to the new one. I haven't done this yet, but I presume it should be semi-straightforward -- do the CentOS install on the new disk, mount the old disk on /olddisk or somesuch, and start copying. However, I'm not sure how to handle getting the machine to recognize the new empty disk as the target of the CentOS install (I suppose I can just pull the old disk during the installation), remember that this is the intended boot disk once the install has happened), and tweak /etc/fstab (right?) to set up the old disk on the desired mount point. (Both disks are, or will be, SATA.) I could probably hack it together without losing too much hair or doing too much damage, but could anyone offer some advice that would get/keep me on the right track? Thanks!

    Read the article

  • How to make Firefox file associations consistent with Ubuntu file associations?

    - by wbharding
    This seems to be a pretty commonly Google question, but one for which there are no answers. http://www.linuxquestions.org/questions/linux-software-2/firefox-download-mime-types-378902 http://www.birkit.com/content/kubuntu-linux/internet/firefox/fix-file-associations-in-firefox.html Being three links amongst the many. The gist of what I want to accomplish is to have Firefox understand the file associations I download without me having to manually map all of them myself. Gnome knows the file extensions, so I would have expected that Firefox could just use the already-known file mappings there to open the right stuff (as I presume Chrome does). But it doesn't. At least not for me, using Firefox 4, and not by default. When I click on a downloaded file right now, Firefox always has to ask me what application should be used to open the file. A handful of Google results tell me that I can reassociate my file extensions by deleting ~/.mozilla/firefox/[profile name]/mimeTypes.rdf, but while deleting that file does in fact result in a new mimeTypes file being generated, the new mimeTypes is just as barren as the old one had been. Based on the amount of unanswered Qs on the Googlesphere, I know this is a very common problem for Ubuntu users, but it seems to be one for which nobody has chimed in with a good solution. Maybe Superuser can finally be the panacea for us all?

    Read the article

  • How can I make my Super keys (Windows Key) behave more like Ctrl/Alt/Shift in Linux

    - by deltaray
    After using the Ctrl + "arrow keys" for 13 years to switch virtual desktops in X windows, I've been convinced recently to change to using the Super keys instead (the windows key and the context menu key, which I've remapped). This all works fine for the most part. However, something is still picking up the key events that these keys are sending as if they are a normal alphanumeric like key. For example, I first noticed this in Google Docs spreadsheet that if I press the windows key alone over top of a cell, that it starts editing that cell. It doesn't insert anything, it just sends a key event that Firefox sees and starts editing the cell. This caused problems on a collaborative document I was working on as the way Google docs works, it led to me accidentally erasing the data in a few fields before I realised what was going on. I like using the super keys, but I want them to behave more like a Ctrl or Alt key does in that its a modifier key and doesn't send anything until a second key is pressed. My setup is the following: Ubuntu 10.10 XFCE 4 Microsoft Natural Ergo 4000 keyboard (with the logo scratched out) The following is my .Xmodmap file: remove Lock = Caps_Lock keycode 66 = Escape ! The below maps my other windows context menu key. keycode 135 = Super_R Edit: As requested, here is the relevant output from xev for a keypress and keyrelease of my Super_L (left windows key) KeyPress event, serial 34, synthetic NO, window 0x8200001, root 0x15d, subw 0x0, time 2428849342, (177,174), root:(182,228), state 0x10, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XmbLookupString gives 0 bytes: XFilterEvent returns: False KeyRelease event, serial 34, synthetic NO, window 0x8200001, root 0x15d, subw 0x0, time 2428849430, (177,174), root:(182,228), state 0x50, keycode 133 (keysym 0xffeb, Super_L), same_screen YES, XLookupString gives 0 bytes: XFilterEvent returns: False

    Read the article

< Previous Page | 366 367 368 369 370 371 372 373 374 375 376 377  | Next Page >