Search Results

Search found 39866 results on 1595 pages for '2012 end of the world'.

Page 374/1595 | < Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >

• Recover RAID 5 data after created new array instead of re-using

  - by Brigadieren

  Folks please help - I am a newb with a major headache at hand (perfect storm situation). I have a 3 1tb hdd on my ubuntu 11.04 configured as software raid 5. The data had been copied weekly onto another separate off the computer hard drive until that completely failed and was thrown away. A few days back we had a power outage and after rebooting my box wouldn't mount the raid. In my infinite wisdom I entered mdadm --create -f... command instead of mdadm --assemble and didn't notice the travesty that I had done until after. It started the array degraded and proceeded with building and syncing it which took ~10 hours. After I was back I saw that that the array is successfully up and running but the raid is not I mean the individual drives are partitioned (partition type f8 ) but the md0 device is not. Realizing in horror what I have done I am trying to find some solutions. I just pray that --create didn't overwrite entire content of the hard driver. Could someone PLEASE help me out with this - the data that's on the drive is very important and unique ~10 years of photos, docs, etc. Is it possible that by specifying the participating hard drives in wrong order can make mdadm overwrite them? when I do mdadm --examine --scan I get something like ARRAY /dev/md/0 metadata=1.2 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b name=<hostname>:0 Interestingly enough name used to be 'raid' and not the host hame with :0 appended. Here is the 'sanitized' config entries: DEVICE /dev/sdf1 /dev/sde1 /dev/sdd1 CREATE owner=root group=disk mode=0660 auto=yes HOMEHOST <system> MAILADDR root ARRAY /dev/md0 metadata=1.2 name=tanserv:0 UUID=f1b4084a:720b5712:6d03b9e9:43afe51b Here is the output from mdstat cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[0] sdf1[3] sde1[1] 1953517568 blocks super 1.2 level 5, 512k chunk, algorithm 2 [3/3] [UUU] unused devices: <none> fdisk shows the following: fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000bf62e Device Boot Start End Blocks Id System /dev/sda1 * 1 9443 75846656 83 Linux /dev/sda2 9443 9730 2301953 5 Extended /dev/sda5 9443 9730 2301952 82 Linux swap / Solaris Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000de8dd Device Boot Start End Blocks Id System /dev/sdb1 1 91201 732572001 8e Linux LVM Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00056a17 Device Boot Start End Blocks Id System /dev/sdc1 1 60801 488384001 8e Linux LVM Disk /dev/sdd: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000ca948 Device Boot Start End Blocks Id System /dev/sdd1 1 121601 976760001 fd Linux raid autodetect Disk /dev/dm-0: 1250.3 GB, 1250254913536 bytes 255 heads, 63 sectors/track, 152001 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/dm-0 doesn't contain a valid partition table Disk /dev/sde: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x93a66687 Device Boot Start End Blocks Id System /dev/sde1 1 121601 976760001 fd Linux raid autodetect Disk /dev/sdf: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xe6edc059 Device Boot Start End Blocks Id System /dev/sdf1 1 121601 976760001 fd Linux raid autodetect Disk /dev/md0: 2000.4 GB, 2000401989632 bytes 2 heads, 4 sectors/track, 488379392 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 524288 bytes / 1048576 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Per suggestions I did clean up the superblocks and re-created the array with --assume-clean option but with no luck at all. Is there any tool that will help me to revive at least some of the data? Can someone tell me what and how the mdadm --create does when syncs to destroy the data so I can write a tool to un-do whatever was done? After the re-creating of the raid I run fsck.ext4 /dev/md0 and here is the output root@tanserv:/etc/mdadm# fsck.ext4 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Superblock invalid, trying backup blocks... fsck.ext4: Bad magic number in super-block while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 Per Shanes' suggestion I tried root@tanserv:/home/mushegh# mkfs.ext4 -n /dev/md0 mke2fs 1.41.14 (22-Dec-2010) Filesystem label= OS type: Linux Block size=4096 (log=2) Fragment size=4096 (log=2) Stride=128 blocks, Stripe width=256 blocks 122101760 inodes, 488379392 blocks 24418969 blocks (5.00%) reserved for the super user First data block=0 Maximum filesystem blocks=0 14905 block groups 32768 blocks per group, 32768 fragments per group 8192 inodes per group Superblock backups stored on blocks: 32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208, 4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968, 102400000, 214990848 and run fsck.ext4 with every backup block but all returned the following: root@tanserv:/home/mushegh# fsck.ext4 -b 214990848 /dev/md0 e2fsck 1.41.14 (22-Dec-2010) fsck.ext4: Invalid argument while trying to open /dev/md0 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 <device> Any suggestions? Regards!

  Read the article

• Anyone tried dd'ing Raidmembers?

  - by DusteD

  I want replace all disks in a 10 disk raid6 (linux software raid). I could do this by pulling a disk, let the array rebuild, rinse, repeat. But this would take a very long time, and cause 10 rebuilds, which would most likely stress all 10 disks much more than simply reading each disk through once. My question is thus: Could I just shut down the array, and dd each old disk to a new disk and then start the array with the 10 new disks? In an ideal world, I would build another server and just copy the data via network, but this is not an ideal world.

  Read the article

• Linux urldecode filename

  - by Flavius

  Hi Is there any tool to urldecode a file's name and replace it? Example: $ ls hello%20world.txt $ urldecode *.txt $ ls hello world.txt

  Read the article

• Setting up autotest with rspec in ubuntu

  - by Reactor5

  I'm trying to set up autotest on Ubuntu, and no matter what my configuration, I get this: loading autotest/rails_rspec2 style: RailsRspec2 /home/brian/.rvm/gems/ruby-1.9.2-rc2@rails3tutorial/gems/redgreen-1.2.2/lib/redgreen/autotest.rb:6:in `<top (required)>': uninitialized constant Object::PLATFORM (NameError) the .autotest (~/.autotest) file I have is as follows: #!/usr/bin/env ruby require 'redgreen/autotest' def self.notify title, msg, img, pri='low', time=3000 `notify-send -i #{img} -u #{pri} -t #{time} '#{msg}'` end Autotest.add_hook :ran_command do |at| results = [at.results].flatten.join("\n") output = results.slice(/(\d+)\s+examples?,\s*(\d+)\s+failures?(,\s*(\d+)\s+not implemented)?(,\s*(\d+)\s+pending)?/) folder = "~/Pictures/autotest/" if output =~ /([123456789]|[\d]{2,})\sfailures?/ notify "FAIL:", "#{output}", folder+"rails_fail.png", 'critical', 10000 elsif output =~ /[1-9]\d*\spending?/ notify "PENDING:", "#{output}", folder+"rails_pending.png", 'normal', 10000 else notify "PASS:", "#{output}", folder+"rails_ok.png" end end what am I doing wrong here?

  Read the article

• Virus - Isn' t there any online solution ?

  - by Sarang

  In our daily life, we come across various Viruses. In this internet world, we do have lots of type of viruses come to visit us ! A programmer can create a Virus using programming & it can be put on internet. It flows across the world & harm all the system. Don't do we have a same way to run an Anti-virus that flows across the internet & can protect the network from being affected by Viruses ? Please give any Idea...

  Read the article

• Block p2p downloading in my office?

  - by Andrew

  I work in an education office in a third world country. We pay for internet by the megabyte (no other choice) and have lately been using an incredible amount of bandwidth. This is because the office staff have found out about p2p sharing. As far as I know, Limewire is the only program they're using, but I'm sure it's just a matter of time before they discover the more general world of bittorrent. Using only a linksys router (that I could flash), is there any way for me prevent the office from destroying our bandwidth cap by downloading personal items (against policy). Even semi-fixes would be better than nothing.

  Read the article

• Firewall configuration [closed]

  - by yogsma

  So I have a router as facing to the outside world. I have 3 application servers and a database server. All these servers are behind router. Now we are trying to configure the firewall between outside world and router. All servers use Redhat linux. What all precautions , steps I have to carry so that firewall configuration won't create any issue when we restart our application? It would be nice if experienced users help in this case.

  Read the article

• How to copy a cell's formatting using a formula?

  - by Alvin Lim

  For example, cell A1 contains the text "Hello World" which is in bold. In cell A2, I use the formula =A1. Therefore cell A2 now also contains "Hello World", but it is not in bold. How can I modify the formula to also copy the formatting (in this case, bold) of A1? A more complex example is strikethrough properties, i.e. A1 contains "Orange/Red". How do I show the same content in cell A2 dynamically, so that any changes made in A1 will update A2 as well?

  Read the article

• Weird console problem in linux, usually right before OOM

  - by Kevin Quinn

  So I've noticed this happen more than once. If I remember correctly, this usually happens right before OOM, and/or kernel panic that if you type into a tty and then try to backspace it, the same characters are printed back in reverse. This has been merely an interesting oddity to me in the past, but it happened again recently, and I've gotten more curious about what's actually causing that. (Is it sending the characters back to STD_OUT or something?) Does anyone have any idea? I have a feeling the answer will be interesting. Just so I'm clear, if you typed hello world, then tried to backspace it: hello world..dlrow olleh

  Read the article

• Why do some games randomly turn my screen a random solid color?

  - by Emlena.PhD

  When playing some games my computer will randomly have an error that I cannot fix without turning it off and back on again. The screen changes to one solid color, which varies (off the top of my head I can remember seeing solid green, magenta, etc..) and the sound blares a single tone. The sound sometimes briefly restores and I can still hear the game sounds and even hear and still be heard by people in my Mumble channel, but the screen doesn't right itself so I'm still blind. What's more is this happens in some games but not in others. While the game is actually running, not while I'm still in the menu. However, it does happen if I'm afk or idle but the game world is still rendering. Games where the error occurs: League of Legends World of Warcraft Trine The Sims 2 Dungeon Defenders Safe games: games where it has never occurred: Tribes: Ascend Star Wars: the Old Republic Battlefield 3 So relatively older games cause the problem while newer games do not? I cannot predict when it will happen, it just seems random. However, if it happens and I try playing the same game further after restart it does appear to occur more frequently after the first time. But if I switch to a safe game it doesn't continue happening. Both of my RAM sticks appear fine, flipped position or either one on their own and games still run, computer still boots. I would think over-heating, but then why not all games? ALso, sometimes it happens immediately after I start playing, within seconds of the 3D world booting up. I'm looking to upgrade very soon so I want to figure out what component or software is fubar and replace/repair it. Any suggestions or recommendations of tools would be helpful. Below is some system information. Dxdiag does not detect any problems. Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120305-1505) System Manufacturer: Gigabyte Technology Co., Ltd. System Model: EP45-UD3R BIOS: Award Modular BIOS v6.00PG Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (2 CPUs), ~3.2GHz Memory: 4096MB RAM DirectX Version: DirectX 11 DxDiag Version: 6.01.7601.17514 64bit Unicode Graphics card name: NVIDIA GeForce GTX 285 Driver Version: 8.17.12.9610 (error has occurred w/several driver versions) Sound: I do not have a sound card, been using motherboard's built in sound)

  Read the article

• how to pass domain name to backend with pound

  - by FurtiveFelon

  I am using pound as a way to decode SSL for the backend, but the bulk of the work is done on varnish (including virtualhost stuff). As a result, I need pound to just forward all other traffic to varnish verbatim, but it doesn't seem to do that. I am using the default configuration: ListenHTTP Address 1.2.3.4 Port 8080 ## allow PUT and DELETE also (by default only GET, POST and HEAD)?: xHTTP 0 Service BackEnd Address 127.0.0.1 Port 80 End End End So whenever I hit example.com:8080, it will always redirect to the default backend for varnish, which i assume was because the domain (host) header isn't send along. Anyone know what could be wrong? Thanks a lot! Jason

  Read the article

• Applescript Adobe Updater

  - by Alex

  So, I am new to Applescript editor and I am trying to write code to automatically update computers. For some odd reason I can not seem to get Adobe to update successfully. I tried using Accessibility Inspector, but nothing appeared like AXButton So is there even a way of writing code for Adobe when there is not an AXButton option? This is the code: tell application "Adobe Application Manager" activate end tell delay 7.0 tell application "System Events" tell process "Adobe Application Manager" click button "Update" of window "Adobe Application Manager" end tell end tell and this is the error message: error "System Events got an error: Can’t get button \"Update\" of window \"Adobe Application Manager\" of process \"Adobe Application Manager\"." number -1728 from button "Update" of window "Adobe Application Manager" of process "Adobe Application Manager

  Read the article

• A "region code" restriction for a custom created video dvd file

  - by user180820

  I want to create a video dvd ( no menus, just "plug and play" ) from a few video files. I`m doing it like this: ffmpeg -i sample-media/hellboy-2.wmv -y -target ntsc-dvd sample-media-to-mpeg/hellboy-2.vob dvdauthor -o sample-dvd -x dvdauthor-settings.xml mkisofs -dvd-video -o hellboy-2-trailers.iso sample-dvd/ where "dvdauthor-settings.xml" is: link. But when I try to play the iso file in windows it says: Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. When I open the *.IFO file with IfoEdit it says that all world regions are unabled. Can someone tell me why is this happening? ( maybe the whole process of creating the *.iso file is wrong? )

  Read the article

• Word Macro: Move Cursor Down a Row

  - by Bryan

  I have a macro which I've been using to merge two cells together in a word table, but what I want to do is to get the cursor to move down by one cell, so that I can repeatedly press the shortcut key to repeat the command over and over. The macro code that I have (shamelessy copied and pasted from a web page), is as follows: Sub MergeWithCellToRight() ' ' MergeWithCellToRight Macro ' ' Dim oRng As Range Dim oCell As Cell Set oCell = Selection.Cells(1) If oCell.ColumnIndex = Selection.Rows(1).Cells.Count Then MsgBox "There is no cell to the right?", vbCritical, "Error" Exit Sub End If Set oRng = oCell.Range oRng.MoveEnd wdCell, 1 oRng.Cells.Merge Selection.Collapse wdCollapseStart End Sub I've attempted to add the following line just before the 'End Sub' statement Selection.MoveDown wdCell, 1 but this generates the error, Run-time error '4120' Bad Parameter whenever I execute the macro. Can anyone tell me how to correct this or what I'm doing wrong?

  Read the article

• Synergy and Screensaver Sync

  - by user10107

  Hi, I've been using Synergy for some time now to sync an Ubuntu machine and a Windows XP box, and it works really great. The one issue that still lingers is screensaver syncing. Meaning, that if, for example, the Linux box's screensaver is activate or deactivated, the Windows machine's screensaver follows suite. I've tried uninstalling the Gnome screen saver and also tried a different session altogether (e.g. xfce), but nothing seems to work. I've attached my configuration bellow. What else can I try? Thank you section: screens linux-box: windows-box: end section: links linux-box: left = windows-box windows-box: right = linux-box end section: options screenSaverSync = true end

  Read the article

• RJ45 female to male fault

  - by GeoPhoenix

  i have the following - common - problem, on one end of the cable, there are RJ45 males T586 A which are connected to a 8-port switcher, on the other end, there supposed to be RJ45 females _T586 A which in turn will allow another RJ45 male to be connected. the commonly used color scheme was followed on males (having the head down) blue white blue orange white green green white orange brown white brown the problem i believe is located on female end of cable, which i try multiple time to follow the numbers designated by the module, which is the list above in reverse, and as listed resulting in no signal transmission. tried the T586B (both ends) for device to device once, but no results. Which is the proper way of handling this wiring? There were also additional RJ45 females with the numbers 6-5-4-3, but 1 to 8 isn't supposed to be used for this?

  Read the article

• Can't start mysql server in xubuntu

  - by codeomnitrix

  Hey all i am using Xampp version 1.7.1 in xubuntu 10.10. I have installed it in /opt/lampp but problem is that whenever i try to start the server using sudo ./lampp start it shows: Starting XAMPP for Linux 1.7.1... XAMPP: Starting Apache with SSL (and PHP5)... XAMPP: Starting MySQL... Warning: World-writable config file '/opt/lampp/etc/my.cnf' is ignored Warning: World-writable config file '/opt/lampp/etc/my.cnf' is ignored XAMPP: Starting ProFTPD... XAMPP for Linux started. So what should i do?? Thanks in advance.

  Read the article

• How to forward blocked ports by ISP

  - by KiDo

  So I've been trying to setup a TeamSpeak 3 server on my pc but ports (9987,10011,30033) are blocked by my ISP, I've contacted them to unblock them but they didn't accept, and it's the fastest ISP in my city (as living in a 3rd world country) so it's not a good idea to connect to another ISP. The thing is, I've tried Your-Freedom to connect to tunnel my connection & SocksCap. The problem is, when TS works with SocksCap it doesn't show a WAN-IP that friends will use to connect to my server It says "Needs to be Requested" and when I press the Request button, I get nothing. So, any idea what's wrong if someone has done this before? or if you have any other suggestion to run a TS server, would be very glad to hear it and really appreciate that. P.S. as I've mentioned before, living in a 3rd world country, makes me unable to buy a VPS even the cheapest one cause there's no Visa, Credit, or paypal. so that won't work. Thanks in advance.

  Read the article

• Out of nowhere, ssh_exchange_identification: Connection closed by remote hot me too

  - by dgerman

  See similar: Out of nowhere, ssh_exchange_identification: Connection closed by remote host Today, 6/19/12 attempting to ssh to the same host as usual ssh replied ssh_exchange_identification: Connection closed by remote host two additional attempts failed ssh -v $RWS OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to Real-World-Systems.com [174.127.119.33] port 22. debug1: Connection established. debug1: identity file /Users/dgerman/.ssh/id_rsa type 1 debug1: identity file /Users/dgerman/.ssh/id_rsa-cert type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa-cert type -1 ssh_exchange_identification: Connection closed by remote host ping host was successful, ftp host was successful, ssh now successful, ssh -v $RWS OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Applying options for * debug1: Connecting to Real-World-Systems.com [174.127.119.33] port 22. debug1: Connection established. debug1: identity file /Users/dgerman/.ssh/id_rsa type 1 debug1: identity file /Users/dgerman/.ssh/id_rsa-cert type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa type -1 debug1: identity file /Users/dgerman/.ssh/id_dsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3 debug1: match: OpenSSH_4.3 pat OpenSSH_4* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'real-world-systems.com' is known and matches the RSA host key. debug1: Found key in /Users/dgerman/.ssh/known_hosts:5 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/dgerman/.ssh/id_rsa debug1: Authentications that can continue: publickey,gssapi-with-mic,password debug1: Trying private key: /Users/dgerman/.ssh/id_dsa debug1: Next authentication method: password ++++ What gives?? +++++++++++ Mac OS X 10.4.7 , OpenSSH_5.6p1, OpenSSL 0.9.8r 8 Feb 2011, /Users/dgerman/.ssh > ls -la total 24 drwx------ 7 dgerman staff 238 Jun 19 15:46 . drwxr-xr-x 389 dgerman staff 13226 Jun 19 15:46 .. -rw------- 1 dgerman staff 1766 Feb 26 18:25 id_rsa -rw-r--r-- 1 dgerman staff 400 Feb 26 18:25 id_rsa.pub -rw-r--r-- 1 dgerman staff 67 Feb 26 18:27 keyfingerprint -rw-r--r-- 1 dgerman staff 6215 May 1 08:11 known_hosts -rw-r--r-- 1 dgerman staff 220 Feb 26 18:26 randomart

  Read the article

• Stress test a server for simultaneous connection

  - by weston smith

  I am trying to figure out a practical way to stress test a server for 300 to 600 simultaneous connections. Any advice? Thank you everyone for the help. To be more specific (sorry I wasn't before) this is a Flash Media Server on AWS that will be streaming live video. I've been having problems with the video freezing/buffering for everyone and I need to verify if its on the user end, upload end, or server end. I mainly need help with stress testing the server with 300-600 multiple request before going live.

  Read the article

• Various problems with software raid1 array built with Samsung 840 Pro SSDs

  - by Andy B

  I am bringing to ServerFault a problem that is tormenting me for 6+ months. I have a CentOS 6 (64bit) server with an md software raid-1 array with 2 x Samsung 840 Pro SSDs (512GB). Problems: Serious write speed problems: root [~]# time dd if=arch.tar.gz of=test4 bs=2M oflag=sync 146+1 records in 146+1 records out 307191761 bytes (307 MB) copied, 23.6788 s, 13.0 MB/s real 0m23.680s user 0m0.000s sys 0m0.932s When doing the above (or any other larger copy) the load spikes to unbelievable values (even over 100) going up from ~ 1. When doing the above I've also noticed very weird iostat results: Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 0.00 1589.50 0.00 54.00 0.00 13148.00 243.48 0.60 11.17 0.46 2.50 sdb 0.00 1627.50 0.00 16.50 0.00 9524.00 577.21 144.25 1439.33 60.61 100.00 md1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 0.00 1602.00 0.00 12816.00 8.00 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 And it keeps it this way until it actually writes the file to the device (out from swap/cache/memory). The problem is that the second SSD in the array has svctm and await roughly 100 times larger than the second. For some reason the wear is different between the 2 members of the array root [~]# smartctl --attributes /dev/sda | grep -i wear 177 Wear_Leveling_Count 0x0013 094% 094 000 Pre-fail Always - 180 root [~]# smartctl --attributes /dev/sdb | grep -i wear 177 Wear_Leveling_Count 0x0013 070% 070 000 Pre-fail Always - 1005 The first SSD has a wear of 6% while the second SSD has a wear of 30%!! It's like the second SSD in the array works at least 5 times as hard as the first one as proven by the first iteration of iostat (the averages since reboot): Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util sda 10.44 51.06 790.39 125.41 8803.98 1633.11 11.40 0.33 0.37 0.06 5.64 sdb 9.53 58.35 322.37 118.11 4835.59 1633.11 14.69 0.33 0.76 0.29 12.97 md1 0.00 0.00 1.88 1.33 15.07 10.68 8.00 0.00 0.00 0.00 0.00 md2 0.00 0.00 1109.02 173.12 10881.59 1620.39 9.75 0.00 0.00 0.00 0.00 md0 0.00 0.00 0.41 0.01 3.10 0.02 7.42 0.00 0.00 0.00 0.00 What I've tried: I've updated the firmware to DXM05B0Q (following reports of dramatic improvements for 840Ps after this update). I have looked for "hard resetting link" in dmesg to check for cable/backplane issues but nothing. I have checked the alignment and I believe they are aligned correctly (1MB boundary, listing below) I have checked /proc/mdstat and the array is Optimal (second listing below). root [~]# fdisk -ul /dev/sda Disk /dev/sda: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00026d59 Device Boot Start End Blocks Id System /dev/sda1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sda2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sda3 4605952 814106623 404750336 fd Linux raid autodetect root [~]# fdisk -ul /dev/sdb Disk /dev/sdb: 512.1 GB, 512110190592 bytes 255 heads, 63 sectors/track, 62260 cylinders, total 1000215216 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003dede Device Boot Start End Blocks Id System /dev/sdb1 2048 4196351 2097152 fd Linux raid autodetect Partition 1 does not end on cylinder boundary. /dev/sdb2 * 4196352 4605951 204800 fd Linux raid autodetect Partition 2 does not end on cylinder boundary. /dev/sdb3 4605952 814106623 404750336 fd Linux raid autodetect /proc/mdstat root # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdb2[1] sda2[0] 204736 blocks super 1.0 [2/2] [UU] md2 : active raid1 sdb3[1] sda3[0] 404750144 blocks super 1.0 [2/2] [UU] md1 : active raid1 sdb1[1] sda1[0] 2096064 blocks super 1.1 [2/2] [UU] unused devices: Running a read test with hdparm root [~]# hdparm -t /dev/sda /dev/sda: Timing buffered disk reads: 664 MB in 3.00 seconds = 221.33 MB/sec root [~]# hdparm -t /dev/sdb /dev/sdb: Timing buffered disk reads: 288 MB in 3.01 seconds = 95.77 MB/sec But look what happens if I add --direct root [~]# hdparm --direct -t /dev/sda /dev/sda: Timing O_DIRECT disk reads: 788 MB in 3.01 seconds = 262.08 MB/sec root [~]# hdparm --direct -t /dev/sdb /dev/sdb: Timing O_DIRECT disk reads: 534 MB in 3.02 seconds = 176.90 MB/sec Both tests increase but /dev/sdb doubles while /dev/sda increases maybe 20%. I just don't know what to make of this. As suggested by Mr. Wagner I've done another read test with dd this time and it confirms the hdparm test: root [/home2]# dd if=/dev/sda of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 38.0855 s, 282 MB/s root [/home2]# dd if=/dev/sdb of=/dev/null bs=1G count=10 10+0 records in 10+0 records out 10737418240 bytes (11 GB) copied, 115.24 s, 93.2 MB/s So sda is 3 times faster than sdb. Or maybe sdb is doing also something else besides what sda does. Is there some way to find out if sdb is doing more than what sda does? UPDATE Again, as suggested by Mr. Wagner, I have swapped the 2 SSDs. And as he thought it would happen, the problem moved from sdb to sda. So I guess I'll RMA one of the SSDs. I wonder if the cage might be problematic. What is wrong with this array? Please help!

  Read the article

• chef deploy start service and restart service in sequence

  - by Ryan

  Chef stop and start service in sequence and would like to ask different procedure. Step 1: framework bootstrap to jboss service bash "bootstrap application" do code <<-EOF ant bootstrap EOF end Step 2: then start jboss service "jboss" do action :start end Step 3: install application bash "install application" do code <<-EOF ant install EOF end in between step 2 and 3, ant install returns error because jboss is not started yet. but successful on the 2nd run. obviously step 3 doesnt know if the jboss already started. how to do this on chef?

  Read the article

• ssh: which side is running the SOCKS proxy?

  - by Barry Brown

  When I set up a tunnel using dynamic forwarding (ssh -D), which side is running the SOCKS proxy? That is, is the proxy running on the local end (client) or the remote end (server)? Here's the situation: I want to set up several tunnels chained together using -L. Should the -D tunnel be the last one in the chain or the first one? Edit: I found the answer to the second paragraph on Super User (the -D tunnel should be at the remotest end). But I'd still like to know where the proxy code is running.

  Read the article

• page up/down print ~ instead of history search in terminal

  - by Desmond

  I am on a Macbook Pro with mac os x 10.8.2 I have set: page up: \033[5~ page down: \033[6~ in terminal keyboard settings (pressing esc to get \033). My ~/.xinputrc is: # Be 8 bit clean. set input-meta on set output-meta on set convert-meta off # Auto completion options set show-all-if-ambiguous on set completion-ignore-case on # Keybindings "\e[1~": beginning-of-line # Home key "\e[4~": end-of-line # End key "\e[5~": history-search-backward # Page Up "\e[6~": history-search-forward # Page Down "\e[3~": delete-char # Delete key "\e[5C": forward-word # Ctrl+right "\e[5D": backward-word # Ctrl+left I am just following a guide found on internet (actually there are a lot of guide really similar): http://macimproved.wordpress.com/2010/01/04/fix-page-updown-home-end-in-terminal/ Unfortunately, the only (terrific) result is that when I press page up (fn + up arrow) just a "~" is printed in the terminal.

  Read the article

• Lighttpd mod_rewrite conversion from .htaccess format

  - by hoball

  Hello, I am using lighttpd as webserver and is having an issue about mod_rewrite. Currently I have a set of Apache .htaccess rewrite rules from a PHP script: RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteCond %{REQUEST_FILENAME} !-l RewriteRule ^(.*)$ index.php [QSA,L] In my understanding, if the requested URI is not a file/directory/sym-link, append it to index.php eg. www.a.com/hello/world --> www.a.com/index.php/hello/world I attempted to convert to lighttpd specification: url.rewrite-if-not-file = ( "^(.*)$" = "index.php/$1" ) However, it doesn't work. I suspect that is due to misuse of $1. I tried to use $0/%0 or something else but they fail. Would you please provide me a hint on making the syntax work? Thank you!

  Read the article

< Previous Page | 370 371 372 373 374 375 376 377 378 379 380 381  | Next Page >