Search Results

Search found 10548 results on 422 pages for 'standard deviation'.

Page 393/422 | < Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >

• Custom SNMP Cacti Data Source fails to update

  - by Andrew Wilkinson

  I'm trying to create a custom SNMP datasource for Cacti but despite everything I can check being correct, it is not creating the rrd file, or updating it even when I create it. Other, standard SNMP sources are working correctly so it's not SNMP or permissions that are the problem. I've created a new Data Query, which when I click on "Verbose Query" on the device screen returns the following: + Running data query [10]. + Found type = '3' [SNMP Query]. + Found data query XML file at '/volume1/web/cacti/resource/snmp_queries/syno_volume_stats.xml' + XML file parsed ok. + missing in XML file, 'Index Count Changed' emulated by counting oid_index entries + Executing SNMP walk for list of indexes @ '.1.3.6.1.2.1.25.2.3.1.3' Index Count: 8 + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.1' value: 'Physical memory' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.3' value: 'Virtual memory' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.6' value: 'Memory buffers' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.7' value: 'Cached memory' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.10' value: 'Swap space' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.31' value: '/' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.32' value: '/volume1' + Index found at OID: '.1.3.6.1.2.1.25.2.3.1.3.33' value: '/opt' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.1' results: '1' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.3' results: '3' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.6' results: '6' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.7' results: '7' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.10' results: '10' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.31' results: '31' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.32' results: '32' + index_parse at OID: '.1.3.6.1.2.1.25.2.3.1.3.33' results: '33' + Located input field 'index' [walk] + Executing SNMP walk for data @ '.1.3.6.1.2.1.25.2.3.1.3' + Found item [index='Physical memory'] index: 1 [from value] + Found item [index='Virtual memory'] index: 3 [from value] + Found item [index='Memory buffers'] index: 6 [from value] + Found item [index='Cached memory'] index: 7 [from value] + Found item [index='Swap space'] index: 10 [from value] + Found item [index='/'] index: 31 [from value] + Found item [index='/volume1'] index: 32 [from value] + Found item [index='/opt'] index: 33 [from value] + Located input field 'volsizeunit' [walk] + Executing SNMP walk for data @ '.1.3.6.1.2.1.25.2.3.1.4' + Found item [volsizeunit='1024 Bytes'] index: 1 [from value] + Found item [volsizeunit='1024 Bytes'] index: 3 [from value] + Found item [volsizeunit='1024 Bytes'] index: 6 [from value] + Found item [volsizeunit='1024 Bytes'] index: 7 [from value] + Found item [volsizeunit='1024 Bytes'] index: 10 [from value] + Found item [volsizeunit='4096 Bytes'] index: 31 [from value] + Found item [volsizeunit='4096 Bytes'] index: 32 [from value] + Found item [volsizeunit='4096 Bytes'] index: 33 [from value] + Located input field 'volsize' [walk] + Executing SNMP walk for data @ '.1.3.6.1.2.1.25.2.3.1.5' + Found item [volsize='1034712'] index: 1 [from value] + Found item [volsize='3131792'] index: 3 [from value] + Found item [volsize='1034712'] index: 6 [from value] + Found item [volsize='775904'] index: 7 [from value] + Found item [volsize='2097080'] index: 10 [from value] + Found item [volsize='612766'] index: 31 [from value] + Found item [volsize='1439812394'] index: 32 [from value] + Found item [volsize='1439812394'] index: 33 [from value] + Located input field 'volused' [walk] + Executing SNMP walk for data @ '.1.3.6.1.2.1.25.2.3.1.6' + Found item [volused='1022520'] index: 1 [from value] + Found item [volused='1024096'] index: 3 [from value] + Found item [volused='32408'] index: 6 [from value] + Found item [volused='775904'] index: 7 [from value] + Found item [volused='1576'] index: 10 [from value] + Found item [volused='148070'] index: 31 [from value] + Found item [volused='682377865'] index: 32 [from value] + Found item [volused='682377865'] index: 33 [from value] AS you can see it appears to be returning the correct data. I've also set up data templates and graph templates to display the data. The create graphs for a device screen shows the correct data, and when selecting one row can clicking create a new data source and graph are created. Unfortunately the data source is never updated. Increasing the poller log level shows that it appears to not even be querying the data source, despite it being used? What should my next steps to debug this issue be?

  Read the article

• Recommendations for distributed processing/distributed storage systems

  - by Eddie

  At my organization we have a processing and storage system spread across two dozen linux machines that handles over a petabyte of data. The system right now is very ad-hoc; processing automation and data management is handled by a collection of large perl programs on independent machines. I am looking at distributed processing and storage systems to make it easier to maintain, evenly distribute load and data with replication, and grow in disk space and compute power. The system needs to be able to handle millions of files, varying in size between 50 megabytes to 50 gigabytes. Once created, the files will not be appended to, only replaced completely if need be. The files need to be accessible via HTTP for customer download. Right now, processing is automated by perl scripts (that I have complete control over) which call a series of other programs (that I don't have control over because they are closed source) that essentially transforms one data set into another. No data mining happening here. Here is a quick list of things I am looking for: Reliability: These data must be accessible over HTTP about 99% of the time so I need something that does data replication across the cluster. Scalability: I want to be able to add more processing power and storage easily and rebalance the data on across the cluster. Distributed processing: Easy and automatic job scheduling and load balancing that fits with processing workflow I briefly described above. Data location awareness: Not strictly required but desirable. Since data and processing will be on the same set of nodes I would like the job scheduler to schedule jobs on or close to the node that the data is actually on to cut down on network traffic. Here is what I've looked at so far: Storage Management: GlusterFS: Looks really nice and easy to use but doesn't seem to have a way to figure out what node(s) a file actually resides on to supply as a hint to the job scheduler. GPFS: Seems like the gold standard of clustered filesystems. Meets most of my requirements except, like glusterfs, data location awareness. Ceph: Seems way to immature right now. Distributed processing: Sun Grid Engine: I have a lot of experience with this and it's relatively easy to use (once it is configured properly that is). But Oracle got its icy grip around it and it no longer seems very desirable. Both: Hadoop/HDFS: At first glance it looked like hadoop was perfect for my situation. Distributed storage and job scheduling and it was the only thing I found that would give me the data location awareness that I wanted. But I don't like the namename being a single point of failure. Also, I'm not really sure if the MapReduce paradigm fits the type of processing workflow that I have. It seems like you need to write all your software specifically for MapReduce instead of just using Hadoop as a generic job scheduler. OpenStack: I've done some reading on this but I'm having trouble deciding if it fits well with my problem or not. Does anyone have opinions or recommendations for technologies that would fit my problem well? Any suggestions or advise would be greatly appreciated. Thanks!

  Read the article

• Netgear VPN endpoint drops connectivity to single IP address

  - by Justin Bowers

  I'm having a strange issue with one of the networks I manage recently. We have about 14 different networks connected together through a Netgear hardware VPN. Everything has been running fine (other than standard connectivity problems) for a few years now, but I've hit a wall with a problem that's just cropped up at one of the VPN endpoint locations. Our primary VPN network is on the 192.168.1.0/24 subnet and our other 13 networks are on the 192.168.2.0/24 - 192.168.14.0/24 subnets. We run a terminal server on the 192.168.1.0/24 network with IP address 192.168.1.100. Starting Thursday of last week, we had a problem with connectivity of the 192.168.2.0/24 network to 192.168.1.100. When troubleshooting the problem, I found that Network 2 (192.168.2.0/24) still had connectivity to the Internet as well as VPN connectivity to Network 1 (192.168.1.0/24). We could ping and connect to any other device other than the server with IP address 192.168.1.100. Also, none of our networks had an issue accessing 192.168.1.100. I ran a scan on Network 2 after assigning static IP addresses to one of the workstations but received no response from 192.168.1.100 (looking for possibly a new device that someone had plugged into Network 2 that had a duplicate IP address with the server). Asking the staff, noone had reported connecting a new device to Network 2 as well. I then assigned a secondary IP address of 192.168.1.88 to the server and could ping and connect to the secondary IP address from Network 2, but still couldn't access it via 192.168.1.100. I then just rebooted the Netgear VPN Firewall (FVS318v3) and after it came back up, connectivity to 192.168.1.100 was restored. Beforehand, when checking for devices with a possible duplicate IP address, I did run a check for available wireless access points and stations and found none (our wireless is secured via MAC address access control through a WG102 device). I thought that it may have been a fluke for some reason since everything came back up after a power cycle of the VPN Firewall. Things ran fine for a few days until this afternoon, when the problem happened again. One of our users claimed that they had connectivity problems to the server and after connecting to the computer, I found that I couldn't ping the server address anymore. I could still ping the alternate IP address of the server though, so I went ahead and rebooted the VPN firewall again and connectivity was restored. Unfortunately, I can't find anything in the security or VPN logs of the firewall that helps point me in the right direction, so I thought I would go ahead and ask to see if anyone else has any other insight into why we've started having this problem. I am aware that it could still be a device with a duplicate IP address of the server on Network 2, but every employee claim states that there's been no such new device brought in to the network. I know this is a long read, but any help is appreciated! Thanks, Justin

  Read the article

• Using Upstart to manage Unicorn w/ rbenv + bundler binstubs w/ ruby-local-exec shebang

  - by codykrieger

  Alright, this is melting my brain. It might have something to do with the fact that I don't understand Upstart as well as I should. Sorry in advance for the long question. I'm trying to use Upstart to manage a Rails app's Unicorn master process. Here is my current /etc/init/app.conf: description "app" start on runlevel [2] stop on runlevel [016] console owner # expect daemon script APP_ROOT=/home/deploy/app PATH=/home/deploy/.rbenv/shims:/home/deploy/.rbenv/bin:$PATH $APP_ROOT/bin/unicorn -c $APP_ROOT/config/unicorn.rb -E production # >> /tmp/upstart.log 2>&1 end script # respawn That works just fine - the Unicorns start up great. What's not great is that the PID detected is not of the Unicorn master, it's of an sh process. That in and of itself isn't so bad, either - if I wasn't using the automagical Unicorn zero-downtime deployment strategy. Because shortly after I send -USR2 to my Unicorn master, a new master spawns up, and the old one dies...and so does the sh process. So Upstart thinks my job has died, and I can no longer restart it with restart or stop it with stop if I want. I've played around with the config file, trying to add -D to the Unicorn line (like this: $APP_ROOT/bin/unicorn -c $APP_ROOT/config/unicorn.rb -E production -D) to daemonize Unicorn, and I added the expect daemon line, but that didn't work either. I've tried expect fork as well. Various combinations of all of those things can cause start and stop to hang, and then Upstart gets really confused about the state of the job. Then I have to restart the machine to fix it. I think Upstart is having problems detecting when/if Unicorn is forking because I'm using rbenv + the ruby-local-exec shebang in my $APP_ROOT/bin/unicorn script. Here it is: #!/usr/bin/env ruby-local-exec # # This file was generated by Bundler. # # The application 'unicorn' is installed as part of a gem, and # this file is here to facilitate running it. # require 'pathname' ENV['BUNDLE_GEMFILE'] ||= File.expand_path("../../Gemfile", Pathname.new(__FILE__).realpath) require 'rubygems' require 'bundler/setup' load Gem.bin_path('unicorn', 'unicorn') Additionally, the ruby-local-exec script looks like this: #!/usr/bin/env bash # # `ruby-local-exec` is a drop-in replacement for the standard Ruby # shebang line: # # #!/usr/bin/env ruby-local-exec # # Use it for scripts inside a project with an `.rbenv-version` # file. When you run the scripts, they'll use the project-specified # Ruby version, regardless of what directory they're run from. Useful # for e.g. running project tasks in cron scripts without needing to # `cd` into the project first. set -e export RBENV_DIR="${1%/*}" exec ruby "$@" So there's an exec in there that I'm worried about. It fires up a Ruby process, which fires up Unicorn, which may or may not daemonize itself, which all happens from an sh process in the first place...which makes me seriously doubt the ability of Upstart to track all of this nonsense. Is what I'm trying to do even possible? From what I understand, the expect stanza in Upstart can only be told (via daemon or fork) to expect a maximum of two forks.

  Read the article

• Apache mod_jk Setting for Tomcat - workers.properties

  - by sissonb

  I am trying to direct files with .jsp extensions to tomcat. Otherwise I want apache to serve the file directly (no tomcat). Currently I have a test.jsp which is supposed to create an HTML page with the current date in the body. Instead when I go to that .jsp I see the JK Status Manager. The mod_jk.logs only show, init_jk::mod_jk.c (3365): mod_jk/1.2.35 initialized. I have tomcat and apache setup on my server. Apache runs on 80 and tomcat runs on 8080. localhost:8080 show the tomcat welcome page. I downloaded tomcat-connectors-1.2.35-windows-i386-httpd-2.2.x and copied the mod_jk.so to C:\apache\modules. Then I added LoadModule jk_module modules/mod_jk.so to my httpd.conf. I restart apache and the module loads just fine. Next I downloaded the mod_jk source to get the workers.properties file. I copy workers.properties to C:\apache\confg. Then I added this user, workers.tomcat_home="C:/Program Files/Apache Software Foundation/Tomcat 7.0" workers.java_home="C:/Program Files/Java/jdk1.7.0_03" worker.list=ajp13 worker.ajp13.port=8080 worker.ajp13.host=localhost worker.ajp13.type=ajp13 worker.ajp13.socket_timeout=10 When I try to use the ajp13 user in my httpd.conf I get the following error in my mod_jk.log, [Wed Mar 28 13:08:51 2012] [2196:4100] [info] ajp_connection_tcp_get_message::jk_ajp_common.c (1258): (ajp13) can't receive the response header message from tomcat, network problems or tomcat (127.0.0.1:8080) is down (errno=60) [Wed Mar 28 13:08:51 2012] [2196:4100] [error] ajp_get_reply::jk_ajp_common.c (2117): (ajp13) Tomcat is down or refused connection. No response has been sent to the client (yet) [Wed Mar 28 13:08:51 2012] [2196:4100] [info] ajp_service::jk_ajp_common.c (2614): (ajp13) sending request to tomcat failed (recoverable), (attempt=1) Next I update my httpd.conf with, JkWorkersFile C:/apache/conf/workers.properties JkLogFile C:/apache/logs/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y] " Also I added JkMount /*.jsp jk-status to my virtual host like this, <VirtualHost 192.168.5.250:80> JkMount /*.jsp jk-status #JkMount /*.jsp ajp13 ServerName bgsisson.com ServerAlias www.bgsisson.com DocumentRoot C:/www/resume </VirtualHost> I think i need to include a uriworkermap.properties file, but this is where I am getting stuck. I have put up a test .jsp at bgsisson.com/test.jsp It shows the JK Status Manager when I use JkMount /*.jsp jk-status and 502 Bad Gateway when I use JkMount /*.jsp ajp13 test.jsp <%-- use the 'taglib' directive to make the JSTL 1.0 core tags available; use the uri "http://java.sun.com/jsp/jstl/core" for JSTL 1.1 --%> <%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %> <%-- use the 'jsp:useBean' standard action to create the Date object; the object is set as an attribute in page scope --%> <jsp:useBean id="date" class="java.util.Date" /> <html> <head><title>First JSP</title></head> <body> <h2>Here is today's date</h2> <c:out value="${date}" /> </body> </html>

  Read the article

• A faulty Caviar Blue hard drive?

  - by Glister

  We have a small "homemade" server running fully updated Debian Wheezy (amd64). One hard drive installed: WDC WD6400AAKS. The motherboard is ASUS M4N68T V2. The usual load: CPU: an average of 20% Each week about 50GB of additional space is occupied. About 47GB of uploaded files and 3GB of MySQL data. I'm afraid that the hard drive may be about to fail. I saw Pre-fail on few places when I ran: root@SERVER:/tmp# smartctl -a /dev/sda smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Western Digital Caviar Blue Serial ATA Device Model: WDC WD6400AAKS-XXXXXXX Serial Number: WD-XXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 0014ee XXXXXXXXXXXXX Firmware Version: 01.03B01 User Capacity: 640,135,028,736 bytes [640 GB] Sector Size: 512 bytes logical/physical Device is: In smartctl database [for details use: -P show] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Oct 28 18:55:27 2013 UTC SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x85) Offline data collection activity was aborted by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 247) Self-test routine in progress... 70% of test remaining. Total time to complete Offline data collection: (11580) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 136) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 157 146 021 Pre-fail Always - 5108 4 Start_Stop_Count 0x0032 098 098 000 Old_age Always - 2968 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 051 Old_age Always - 0 9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 15445 10 Spin_Retry_Count 0x0032 100 100 051 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 051 Old_age Always - 0 12 Power_Cycle_Count 0x0032 098 098 000 Old_age Always - 2950 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 426 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 2968 194 Temperature_Celsius 0x0022 111 095 000 Old_age Always - 36 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 160 000 Old_age Always - 21716 200 Multi_Zone_Error_Rate 0x0008 200 200 051 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 15444 - Error SMART Read Selective Self-Test Log failed: scsi error aborted command Smartctl: SMART Selective Self Test Log Read Failed root@SERVER:/tmp# In one tutorial I read that the pre-fail is a an indication of coming failure, in another tutorial I read that it is not true. Can you guys help me decode the output of smartctl? It would be also nice to share suggestions what should I do if I want to ensure data integrity (about 50GB of new data each week, up to 2TB for the whole period I'm interested in). Maybe I will go with 2x2TB Caviar Black in RAID4?

  Read the article

• What Apache/PHP configurations do you know and how good are they?

  - by FractalizeR

  Hello. I wanted to ask you about PHP/Apache configuration methods you know, their pros and cons. I will start myself: ---------------- PHP as Apache module---------------- Pros: good speed since you don't need to start exe every time especially in mpm-worker mode. You can also use various PHP accelerators in this mode like APC or eAccelerator. Cons: if you are running apache in mpm-worker mode, you may face stability issues because every glitch in any php script will lead to unstability to the whole thread pool of that apache process. Also in this mode all scripts are executed on behalf of apache user. This is bad for security. mpm-worker configuration requires PHP compiled in thread-safe mode. At least CentOS and RedHat default repositories doesn't have thread-safe PHP version so on these OSes you need to compile at least PHP yourself (there is a way to activate worker mpm on Apache). The use of thread-safe PHP binaries is considered experimental and unstable. Plus, many PHP extensions does not support thread-safe mode or were not well-tested in thread-safe mode. ---------------- PHP as CGI ---------------- This seems to be the slowest default configuration which seems to be a "con" itself ;) ---------------- PHP as CGI via mod_suphp ---------------- Pros: suphp allows you to execute php scipts on behalf of the script file owner. This way you can securely separate different sites on the same machine. Also, suphp allows to use different php.ini files per virtual host. Cons: PHP in CGI mode means less performance. In this mode you can't use php accelerators like APC because each time new process is spawned to handle script rendering the cache of previous process useless. BTW, do you know the way to apply some accelerator in this config? I heard something about using shm for php bytecode cache. Also, you cannot configure PHP via .htaccess files in this mode. You will need to install PECL htscanner for this if you need to set various per-script options via .htaccess (php_value / php_flag directives) ---------------- PHP as CGI via suexec ---------------- This configuration looks the same as with suphp, but I heard, that it's slower and less safe. Almost same pros and cons apply. ---------------- PHP as FastCGI ---------------- Pros: FastCGI standard allows single php process to handle several scripts before php process is killed. This way you gain performance since no need to spin up new php process for each script. You can also use PHP accelerators in this configuration (see cons section for comment). Also, FCGI almost like suphp also allows php processes to be executed on behalf of some user. mod_fcgid seems to have the most complete fcgi support and flexibility for apache. Cons: The use of php accelerator in fastcgi mode will lead to high memory consumption because each PHP process will have his own bytecode cache (unless there is some accelerator that can use shared memory for bytecode cache. Is there such?). FastCGI is also a little bit complex to configure. You need to create various configuration files and make some configuration modifications. It seems, that fastcgi is the most stable, secure, fast and flexible PHP configuration, however, a bit difficult to be configured. But, may be, I missed something? Comments are welcome!

  Read the article

• Making sense of S.M.A.R.T

  - by James

  First of all, I think everyone knows that hard drives fail a lot more than the manufacturers would like to admit. Google did a study that indicates that certain raw data attributes that the S.M.A.R.T status of hard drives reports can have a strong correlation with the future failure of the drive. We find, for example, that after their first scan error, drives are 39 times more likely to fail within 60 days than drives with no such errors. First errors in re- allocations, offline reallocations, and probational counts are also strongly correlated to higher failure probabil- ities. Despite those strong correlations, we find that failure prediction models based on SMART parameters alone are likely to be severely limited in their prediction accuracy, given that a large fraction of our failed drives have shown no SMART error signals whatsoever. Seagate seems like it is trying to obscure this information about their drives by claiming that only their software can accurately determine the accurate status of their drive and by the way their software will not tell you the raw data values for the S.M.A.R.T attributes. Western digital has made no such claim to my knowledge but their status reporting tool does not appear to report raw data values either. I've been using HDtune and smartctl from smartmontools in order to gather the raw data values for each attribute. I've found that indeed... I am comparing apples to oranges when it comes to certain attributes. I've found for example that most Seagate drives will report that they have many millions of read errors while western digital 99% of the time shows 0 for read errors. I've also found that Seagate will report many millions of seek errors while Western Digital always seems to report 0. Now for my question. How do I normalize this data? Is Seagate producing millions of errors while Western digital is producing none? Wikipedia's article on S.M.A.R.T status says that manufacturers have different ways of reporting this data. Here is my hypothesis: I think I found a way to normalize (is that the right term?) the data. Seagate drives have an additional attribute that Western Digital drives do not have (Hardware ECC Recovered). When you subtract the Read error count from the ECC Recovered count, you'll probably end up with 0. This seems to be equivalent to Western Digitals reported "Read Error" count. This means that Western Digital only reports read errors that it cannot correct while Seagate counts up all read errors and tells you how many of those it was able to fix. I had a Seagate drive where the ECC Recovered count was less than the Read error count and I noticed that many of my files were becoming corrupt. This is how I came up with my hypothesis. The millions of seek errors that Seagate produces are still a mystery to me. Please confirm or correct my hypothesis if you have additional information. Here is the smart status of my western digital drive just so you can see what I'm talking about: james@ubuntu:~$ sudo smartctl -a /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1001FALS-00E3A0 Serial Number: WD-WCATR0258512 Firmware Version: 05.01D05 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Thu Jun 10 19:52:28 2010 PDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 179 175 021 Pre-fail Always - 4033 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 270 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1468 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 262 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 46 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 223 194 Temperature_Celsius 0x0022 105 102 000 Old_age Always - 42 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

  Read the article

• Unable to make the session state request to the session state server

  - by Angry_IT_Guru

  For about 4-5 months now, I seem to be having this sporadic issue--mainly during our busiest time of the day between 10:30-11:45AM, where all my Windows 2003 web servers in a Microsoft NLB cluster start throwing session state server errors. A sample error is below. System.Web.HttpException: Unable to make the session state request to the session state server. Please ensure that the ASP.NET State service is started and that the client and server ports are the same. If the server is on a remote machine, please ensure that it accepts remote requests by checking the value of HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\aspnet_state\Parameters\AllowRemoteConnection. If the server is on the local machine, and if the before mentioned registry value does not exist or is set to 0, then the state server connection string must use either 'localhost' or '127.0.0.1' as the server name. at System.Web.SessionState.OutOfProcSessionStateStore.MakeRequest(StateProtocolVerb verb, String id, StateProtocolExclusive exclusiveAccess, Int32 extraFlags, Int32 timeout, Int32 lockCookie, Byte[] buf, Int32 cb, Int32 networkTimeout, SessionNDMakeRequestResults& results) at System.Web.SessionState.OutOfProcSessionStateStore.SetAndReleaseItemExclusive(HttpContext context, String id, SessionStateStoreData item, Object lockId, Boolean newItem) at System.Web.SessionState.SessionStateModule.OnReleaseState(Object source, EventArgs eventArgs) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Now I'm using ASP.NET State service on a centralized back-end Windows 2003 server that all servers communicate to. I was originally using SQL Server state for a couple years as well prior to having this issue. The problem with SQL wqas that when the issue occurred, it created a blocking situation which essentially impacted all users across all servers. The product company recommended that I use the standard ASP.NET State service as that was what they technically supported. Why this would make a difference is beyond me -- but I had no choice but to try it! I have attempted to create multiple application pools, adding additional servers, chaning TCP/IP timeout from 20 to 30 seconds, and even calling Microsoft ASP.NET product support, with very little success. I even recommended that they review whether they are using read-only session state instead of read/write per page request -- as I understand that this basically causes every page to make round-trips to state server even if state isn't being used on the page. Unfortunately, the application is developed by our product company and they insist that it is something with my environment because other clients do not have these sort of issues. However, I've talked to other clients and they tell me when they've seen issues like they, they've basically had to create another web farm. This issue almost seems like I've simply reached some architectural limit within the application... Microsoft's position on the issue is that the session state needs to be reduced and the returncode being reported back from the state server indicates buffers are full. To better understand the scope of issues (rather than wait for customers to call and complain), I installed ELMAH and configured it to send me e-mails when unhandled exceptions occur. I basically get 500-1000 e-mails during the time period of high activity! If any one has any other ideas I could try or better ways to troubleshoot, I'd appreciate it.

  Read the article

• WDS DHCP same server on Windows Server 2008

  - by Richard

  I have been struggling with a problem on my Windows Server 2008 for the past 4 - 5 hours and cannot figure out whats wrong. I have tried pretty much everything that I found on google and all the links are purple. Hopefully you guys can help me. I am running a Windows Server 2008 Standard edition with the latest updates as of today. Furthermore I am running a Windows Server 2003. Both are virtual machines on my ESXi 5 server. My network is: 192.168.10.0/24 W2k8: 192.168.10.251 is the PDC running ADS, DHCP and WDS W2k3: 192.168.10.253 AND 192.168.1.175 running Routing and Remote Access and ISA 2006 Enterprise In my internal network (192.168.10.0/24) I have my client machine (192.168.10.10) that runs a VMWare Workstation. I am trying to deploy Windows 7 Home Premium to a virtual machine on my VMWorkstation via PXE. I have set the Workstation's VM network adapter to "bridged" so that it uses the physical network adapter and is connected to my internal network. The DHCP pool is configured to give IP addresses from 192.168.10.10-192.168.10.15 (works for normal clients and is not used up) When I start my VM with the PXE I get the error: PXE-E52:proxyDHCP offers were received. No DHCP offers were received Apperently this means "that means that WDS responded but the DHCP server did not." People suggested to direct the traffic to both WDS and DHCP on the router, since everything is on the same subnet there is no need for that as the broadcast is seen by everyone (WDS and DHCP) No reservation for the virtual mac addrs is made on the DHCP. Furthermore it was suggested to configure the DHCP options: Option 60= PXEClient Option 66= WDS server name or IP address Option 67= Boot file name However, this is not recommended by Microsoft, I tried it and it did not solve my problem. The configuration on the WDS (My System is German therefore the actual naming might be different): PXE response tab: PXE responses is set to "ALL (known and unknown)" DHCP Tab: Do not listen to port 67 is NOT ticked - if I tick this I do not get any responses and the PXE errors gets PXE-E51 that neither DHCP or proxyDHCP were received DHCP-Option 60 for "PXEClient" is ticked The confusing part here is that it is advised in the tab to tick the first option since it is on the same server. Network Configuration Tab: Use the following IP-Address range for Multicast-IP-Address: 224.0.1.0 - 224.0.10.0 Thats not the default one, however it is in the allowed range. The UDP port range is the default since it is not advised to change them. I tried to change the "networkprofile" from 100mbits/1gbits and custom. I am running a 1gbit network with CAT6 cables and 1gbit netgear switch 5 ports. Everything is configured to use 1gbit. The WDS is authorised for the DHCP server. My ISA 2006 configuration: For the internal networking i have configured the following policy array: Allow protocols on internal network including the w2k3 host: 67,68,53,ICMP, 4011 UDP receive, 64001-6500 UDP send receive, 69 UDP send Routing and Remote Access I tried the DHCP relay agent configuration that was suggested as well, but that did not work I would highly appreciate anykind of help because I am pretty much done here with my nerves. Thank you very much in advance.

  Read the article

• Mac OS X 10.8 VPN Server: Bypass VPN for LAN traffic (routing LAN traffic to secondary connection)

  - by Dan Robson

  I have somewhat of an odd setup for a VPN server with OS X Mountain Lion. It's essentially being used as a bridge to bypass my company's firewall to our extranet connection - certain things our team needs to do require unfettered access to the outside, and changing IT policies to allow traffic through the main firewall is just not an option. The extranet connection is provided through a Wireless-N router (let's call it Wi-Fi X). My Mac Mini server is configured with the connection to this router as the primary connection, thus unfettered access to the internet via the router. Connections to this device on the immediate subnet are possible through the LAN port, but outside the subnet things are less reliable. I was able to configure the VPN server to provide IP addresses to clients in the 192.168.11.150-192.168.11.200 range using both PPTP and L2TP, and I'm able to connect to the extranet through the VPN using the standard Mac OS X VPN client in System Preferences, however unsurprisingly, a local address (let's call it internal.company.com) returns nothing. I tried to bypass the limitation of the VPN Server by setting up Routes in the VPN settings. Our company uses 13.x.x.x for all internal traffic, instead of 10.x.x.x, so the routing table looked something like this: IP Address ---------- Subnet Mask ---------- Configuration 0.0.0.0 248.0.0.0 Private 8.0.0.0 252.0.0.0 Private 12.0.0.0 255.0.0.0 Private 13.0.0.0 255.0.0.0 Public 14.0.0.0 254.0.0.0 Private 16.0.0.0 240.0.0.0 Private 32.0.0.0 224.0.0.0 Private 64.0.0.0 192.0.0.0 Private 128.0.0.0 128.0.0.0 Private I was under the impression that if nothing was entered here, all traffic was routed through the VPN. With something entered, only traffic specifically marked to go through the VPN would go through the VPN, and all other traffic would be up to the client to access using its own default connection. This is why I had to specifically mark every subnet except 13.x.x.x as Private. My suspicion is that since I can't reach the VPN server from outside the local subnet, it's not making a connection to the main DNS server and thus can't be reached on the larger network. I'm thinking that entering hostnames like internal.company.com aren't kicked back to the client to resolve, because the server has no idea that the IP address falls in the public range, since I suspect (probably should ping test it but don't have access to it right now) that it can't reach the DNS server to find out anything about that hostname. It seems to me that all my options for resolving this all boil down to the same type of solution: Figure out how to reach the DNS with the secondary connection on the server. I'm thinking that if I'm able to do [something] to get my server to recognize that it should also check my local gateway (let's say Server IP == 13.100.100.50 and Gateway IP == 13.100.100.1). From there Gateway IP can tell me to go find DNS Server at 13.1.1.1 and give me information about my internal network. I'm very confused about this path -- really not sure if I'm even making sense. I thought about trying to do this client side, but that doesn't make sense either, since that would add time to each and every client side setup. Plus, it just seems more logical to solve it on the server - I could either get rid of my routing table altogether or keep it - I think the only difference would be that internal traffic would also go through the server - probably an unnecessary burden on it. Any help out there? Or am I in over my head? Forward proxy or transparent proxy is also an option for me, although I have no idea how to set either of those up. (I know, Google is my friend.)

  Read the article

• Intermittent 404 on select assets, LAMP stack

  - by Tom Lagier

  We have a LAMP stack WordPress server that is serving most assets correctly. However, one plugin's CSS file and several images are returning soft 404s roughly 20% of the time. I can't find any reference to the 404 in the access logs, but the browser is definitely receiving a 404 response from somewhere (WordPress, I would assume). When I use an alias URL that does not match the site URL but does resolve to the asset path, the resource loads correctly 100% of the time. However, using the site url only resolves for the select, problematic assets 20% of the time. You can test one of the problematic assets here: http://www.mreco.org/wp-content/uploads/2014/05/zero-cost.jpg However the alias link always resolves correctly: http://mr-eco.wordpress.promocampaigns.com/wp-content/uploads/2014/05/zero-cost.jpg Stranger, if I attempt to access outdated content that definitely does not exist on the server, at the live URL it returns the content roughly 50% of the time. Using the alias link, it 404s 100% of the time - the correct behavior. Error log and PHP error log are clean. A sample access log (pulled from grep 'zero-cost.jpg' /var/log/httpd/mr-eco-access_log) from several refreshes of the live direct link (where I am not seeing any 404's): 10.166.202.202 - - [28/May/2014:20:27:41 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:42 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:43 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.166.202.202 - - [28/May/2014:20:27:43 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 304 - 10.176.201.37 - - [28/May/2014:20:27:56 +0000] "GET /wp-content/uploads/2014/05/zero-cost.jpg HTTP/1.1" 200 57027 Chrome's dev tools list the following network activity before displaying 404 page content: zero-cost.jpg /wp-content/uploads/2014/05 GET 404 Not Found text/html Other 15.9?KB 73.2?KB 953?ms 947?ms My Apache configuration is standard, I've listed the virtual host entry and .htaccess file below. I can provide other parts of Apache config if necessary. Virtual host: <VirtualHost *:80> DocumentRoot /var/www/public_html/mr-eco.wordpress.promocampaigns.com ServerName www.mreco.org ServerAlias mreco.org mr-eco.wordpress.promocampaigns.com ErrorLog logs/mr-eco-error_log CustomLog logs/mr-eco-access_log common <Directory /var/www/public_html/mr-eco.wordpress.promocampaigns.com> AllowOverride All SetOutputFilter DEFLATE </Directory> </VirtualHost> .htaccess: # BEGIN WordPress <IfModule mod_rewrite.c> RewriteEngine On RewriteBase / RewriteRule ^index\.php$ - [L] RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule . /index.php [L] </IfModule> # END WordPress I have checked for multiple A records and can confirm that there is a single A record pointing at the domain: ;; ANSWER SECTION: mreco.org. 60 IN A 50.18.58.174 I'm fairly new to systems administration, and at a complete loss as to what could cause this. In the past, inconsistently 404ing assets have been because of out-of-sync instances behind a load balancer. In this case, it is a single instance behind the load balancer. Because of the inconsistency, it feels like a caching issue. We don't make use of Apache caching, and as far as I know WordPress should not be caching either. What I've done so far: Reset WordPress permalinks Disabled WordPress plugins Re-generated WordPress .htaccess file Swapped ServerName and ServerAlias directives Cleared browser cache Confirmed disk location of resources Checked PHP, access, and error logs Confirmed correct DNS setup (can post if necessary) I'm at a total loss. Thanks for helping me out!

  Read the article

• smartctl -t long isn't finishing

  - by xenoterracide

  I been running smartctl -t long on a drive for about 2 days now and it seems to be stalled at 10%. short and conveyance both passed. I have to send 1 of 2 drives purchased back I found badblocks with badblocks (none on this drive and I'ts made over a pass already). I'm just wondering if I should be concerned about this. smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: WDC WD10EARS-00Y5B1 Serial Number: WD-WMAV51582123 Firmware Version: 80.00A80 User Capacity: 1,000,204,886,016 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon May 10 22:19:52 2010 EDT SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 241) Self-test routine in progress... 10% of test remaining. Total time to complete Offline data collection: (20100) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 231) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x3031) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 3 Spin_Up_Time 0x0027 131 131 021 Pre-fail Always - 6408 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 12 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 148 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 10 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 7 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 174 194 Temperature_Celsius 0x0022 106 102 000 Old_age Always - 41 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Conveyance offline Completed without error 00% 99 - # 2 Extended offline Interrupted (host reset) 10% 30 - # 3 Short offline Completed without error 00% 0 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

  Read the article

• Random Slow Response

  - by ARehman

  We have an ASP.NET MVC 1.0 application running on Windows Server 2008 – Standard (32 –bit), Dual Core Xeon (3.0 GHz), 2 G.B R.A.M. Most of the times application renders response in 3-4 seconds, but sometimes users get very late response and delay is up to 40 seconds or more than a minute. It happens in following way: User browsed a page, idle for 5, 10 or 15 minutes, tried to browse same page or some other. Now, there is a chance that he will see late response whereas the app pool is still up and running. This can happen with any arbitrary page. We have tried followings/observations. Moved the application to stand alone web server App Pool idle shutdown time is 60 minutes. There are no abrupt shut downs/restarts. CPU or memory doesn’t spike. No delays in SQL queries. Modified App Pool setting to run in classic-mode. It didn’t help. Plugged-in custom module to log all those requests which took more than 5 seconds to complete. It didn’t pick any request of interest. Enabled ‘Failed Request Tracing’ to log all those requests which take 20 or more seconds to complete. It didn’t log anything. Event Viewer, HTTPER log, W3SVC logs or WAS logs don’t indicate anything. HTTPERR only has ‘_ _ Timer_ConnectionIdle _ _’ entries. There is not much traffic to server. This can happen also if only two users are active. Next we captured TCP/IP terrific on both a user and server end with Wireshark and below are details in brief of this slowness: Browser sends a request for ~/User/Home/ (GET Request) by setting up a receiving end point using port 'wlbs(port-2504)'. I'm not sure if this could be a problem in some way that browser didn't hand-shake with the server first and assumed that last connection is still open, whereas, I browsed the same page 4 minutes ago and didn't perform any activity with site after that. If I see the HTTPERR log, it indicates that it has ‘_ _ Timer_ConnectionIdle _ _ _’ entry for my last activity with server. Browser (I was using Chrome) waits for any response from the server, doesn’t find any then starts retransmitting the same request using same end point after incrementing wait intervals, e.g. after 8, 18, 29, 40, 62, and 92 seconds. All these GET requests were received by server as well. But, server didn’t send any packet to client. Browser didn't see any response on the end point it set up in point 1, it opened a new end point 'optiwave-lm (port-2524)', did a hand shake with the server and transmitted the same request again. Server received, processed it, and returned successful response. What happened to earlier 6-7 requests? Whether they were passed on to HTTP.SYS or not? Why Failed Request Tracing not logged anything, we didn't find any clue yet. Server served the same page successfully just 4 minutes ago. Looking forward for more suggestions/solutions. -- Thanks

  Read the article

• outgoing DNS flood targeted to non-ISP hosts

  - by radudani

  Below is the specific traffic monitored at the network perimeter and originating from a user PC on Vista platform; my question is not about the effects of the flood, but about the nature of the source of it; is this a kind of known infection, or just an application went out of control? a standard NOD32 scan didn't find anything, as the user told me; Thank you for any hint, Danny 14:40:10.115876 IP 192.168.7.42.4122 67.228.0.181.53: S 2742536765:2742536765(0) win 16384 14:40:10.115943 IP 192.168.7.42.4124 67.228.181.207.53: S 3071079888:3071079888(0) win 16384 14:40:10.116015 IP 192.168.7.42.4126 67.228.0.181.53: S 3445199428:3445199428(0) win 16384 14:40:10.116086 IP 192.168.7.42.4128 67.228.181.207.53: S 2053198691:2053198691(0) win 16384 14:40:10.116154 IP 192.168.7.42.4130 67.228.0.181.53: S 2841660872:2841660872(0) win 16384 14:40:10.116222 IP 192.168.7.42.4132 67.228.181.207.53: S 3150822465:3150822465(0) win 16384 14:40:10.116290 IP 192.168.7.42.4134 67.228.0.181.53: S 1692515021:1692515021(0) win 16384 14:40:10.116358 IP 192.168.7.42.4136 67.228.181.207.53: S 3358275919:3358275919(0) win 16384 14:40:10.116430 IP 192.168.7.42.4138 67.228.0.181.53: S 930184999:930184999(0) win 16384 14:40:10.116498 IP 192.168.7.42.4140 67.228.181.207.53: S 1504984630:1504984630(0) win 16384 14:40:10.116566 IP 192.168.7.42.4142 67.228.0.181.53: S 546074424:546074424(0) win 16384 14:40:10.116634 IP 192.168.7.42.4144 67.228.181.207.53: S 4241828590:4241828590(0) win 16384 14:40:10.116702 IP 192.168.7.42.4146 67.228.0.181.53: S 668634627:668634627(0) win 16384 14:40:10.116769 IP 192.168.7.42.4148 67.228.181.207.53: S 3768119461:3768119461(0) win 16384 14:40:10.117360 IP 192.168.7.42.4111 67.228.0.181.53: 12676 op8 Resp12*- [2128q][|domain] 14:40:10.117932 IP 192.168.7.42.4112 67.228.181.207.53: 44190 op7 NotAuth*|$ [29103q],[|domain] 14:40:10.118726 IP 192.168.7.42.4113 67.228.0.181.53: 49196 inv_q [b2&3=0xeea] [64081q] [28317a] [43054n] [23433au] Type63482 (Class 5889)? M-_^OSM-JM-m^_M-i.[|domain] 14:40:10.119934 IP 192.168.7.42.4114 67.228.181.207.53: 48131 updateMA Resp12$ [43850q],[|domain] 14:40:10.121164 IP 192.168.7.42.4115 67.228.0.181.53: 46330 updateM% [b2&3=0x665b] [23691a] [998q] [32406n] [11452au][|domain] 14:40:10.121866 IP 192.168.7.42.4116 67.228.181.207.53: 34425 op7 YXRRSet* [39927q][|domain] 14:40:10.123107 IP 192.168.7.42.4117 67.228.0.181.53: 56536 notify+ [b2&3=0x27e6] [59761a] [23005q] [33341n] [29705au][|domain] 14:40:10.123961 IP 192.168.7.42.4118 67.228.181.207.53: 19323 stat% [b2&3=0x14bb] [32491a] [41925q] [2038n] [5857au][|domain] 14:40:10.132499 IP 192.168.7.42.4119 67.228.0.181.53: 50432 updateMA+ [b2&3=0x6bc2] [10733a] [9775q] [46984n] [15261au][|domain] 14:40:10.133394 IP 192.168.7.42.4120 67.228.181.207.53: 2171 notify Refused$ [26027q][|domain] 14:40:10.134421 IP 192.168.7.42.4121 67.228.0.181.53: 25802 updateM NXDomain*-$ [28641q][|domain] 14:40:10.135392 IP 192.168.7.42.4122 67.228.181.207.53: 2073 updateMA+ [b2&3=0x6d0b] [43177a] [54332q] [17736n] [43636au][|domain] 14:40:10.136638 IP 192.168.7.42.4123 67.228.0.181.53: 15346 updateD+% [b2&3=0x577a] [61686a] [19106q] [15824n] [37833au] Type28590 (Class 64856)? [|domain] 14:40:10.137265 IP 192.168.7.42.4124 67.228.181.207.53: 60761 update+ [b2&3=0x2b66] [43293a] [53922q] [23115n] [11349au][|domain] 14:40:10.148122 IP 192.168.7.42.4125 67.228.0.181.53: 3418 op3% [b2&3=0x1a92] [51107a] [60368q] [47777n] [56081au][|domain]

  Read the article

• SharePoint Upgrade Global Nav Quirks?

  - by elorg

  We're working on a parallel install/upgrade of SharePoint. The client has WSS 2003 on some old hardware. We've installed MOSS 2007 in a medium farm environment. They want to use this as an opportunity to not just upgrade and use the new features, but to also better organize their content and categorize between different site collections. To accommodate, we've created a few site collections per their specifications in the new environment, and when we ran an upgrade test run we ran into a few .. quirks. We made a backup of the old content database, copied it over to the new environment and restored it as a new database. Created a new web app and attached the migrated data to do an in-place upgrade in this new "test" area. This seems pretty standard - no issues. We have to do a little bit of cleanup (e.g. reset pages to site definition, reset themes, and inherit the global nav / top link bar, etc.). Once that's done, we're using stsadm export/import to copy the individual sites over to their ultimate destinations in the various different site collections. So far so good. But then we ran into one particular site that has a link to an .aspx page in the top link bar in WSS 2003 that's not behaving properly after the upgrade. It's just a link to a "dashboard" .aspx page in a doc library - nothing special. It doesn't seem to matter what we do, or what order we do it (in the "test" web app, in the destination web app, or both). In the end, this ONE site will not allow us to create a link/tab in the global nav. It can inherit the global nav just fine. We can break the inheritance just fine. But if we want to manually add a link in the top link bar - we go through the steps that I've done 1,000x before and click OK - and the tab never appears. It doesn't matter if it's to a page within the site itself, or to Google. We can migrate over other sites into the same site collection and add a tab without issue. If we migrate this quirky site over to another site collection we run into the same issue. Yet, in the "test" web app that we're using to upgrade the data we can add a tab? If we add the tab before we export/import to the final destination, the tab is lost during the process? Has anyone run into anything like this? Any ideas? I've tried every combination of everything that I can think of and nothing works. Unless we can figure out how to get this to work, we're going to just add this tab to the global nav for the entire site collection and inherit it for this site (but that adds the link to all of the site that will inherit, which is both a pro & con for them).

  Read the article

• Screen -X exec commands not working until manually attached

  - by James Watt

  I have a batch script that starts a java server application inside of a screen. The command looks like this: cd /dir/ && screen -A -m -d -S javascreen java -Xms640M -Xmx1024M -jar javaserverapp.jar nogui After I run the batch script, it starts the server and puts it inside the correct screen. If I list my screens after, I see something like this: user@gtwy /dir $ screen -list There is a screen on: 16180.javascreen (Detached) 1 Socket in /var/run/screen/S-user. However, I have a second batch script that sends automated commands to this server and runs on a different crontab interval. Because of the way the application works, I send commands to it like this (this command tells it to alert connected users "testing 123"): screen -X exec .\!\! echo say testing 123 I've also tried: screen -R -X exec .\!\! echo say testing 123 screen -S javascreen -X exec .\!\! echo say testing 123 Unfortunately, these commands DO NOT WORK. They don't even give me an error message, they just do nothing. HOWEVER - If I manually attach to the screen first (with the below command) and then detach, now I can run any of the above commands flawlessly. I can demonstrate this with a video, if I wasn't clear enough here. screen -r -d Thanks in advance. Update: here is the important parts of /etc/screenrc. It should be totally vanilla, I've never edited this file. # VARIABLES # =============================================================== # No annoying audible bell, using "visual bell" # vbell on # default: off # vbell_msg " -- Bell,Bell!! -- " # default: "Wuff,Wuff!!" # Automatically detach on hangup. autodetach on # default: on # Don't display the copyright page startup_message off # default: on # Uses nethack-style messages # nethack on # default: off # Affects the copying of text regions crlf off # default: off # Enable/disable multiuser mode. Standard screen operation is singleuser. # In multiuser mode the commands acladd, aclchg, aclgrp and acldel can be used # to enable (and disable) other user accessing this screen session. # Requires suid-root. multiuser off # Change default scrollback value for new windows defscrollback 1000 # default: 100 # Define the time that all windows monitored for silence should # wait before displaying a message. Default 30 seconds. silencewait 15 # default: 30 # bufferfile: The file to use for commands # "readbuf" ('<') and "writebuf" ('>'): bufferfile $HOME/.screen_exchange # # hardcopydir: The directory which contains all hardcopies. # hardcopydir ~/.hardcopy # hardcopydir ~/.screen # # shell: Default process started in screen's windows. # Makes it possible to use a different shell inside screen # than is set as the default login shell. # If begins with a '-' character, the shell will be started as a login shell. # shell zsh # shell bash # shell ksh shell -$SHELL # shellaka '> |tcsh' # shelltitle '$ |bash' # emulate .logout message pow_detach_msg "Screen session of \$LOGNAME \$:cr:\$:nl:ended." # caption always " %w --- %c:%s" # caption always "%3n %t%? @%u%?%? [%h]%?%=%c" # advertise hardstatus support to $TERMCAP # termcapinfo * '' 'hs:ts=\E_:fs=\E\\:ds=\E_\E\\' # set every new windows hardstatus line to somenthing descriptive # defhstatus "screen: ^En (^Et)" # don't kill window after the process died # zombie "^["

  Read the article

• How to troubleshoot problem with OpenVpn Appliance Server not able to connect

  - by Peter

  1) I have a Windows Server 2008 Standard SP2 2) I am running Hyper-V and have the OpenSvn Appliance Server virtual running 3) I have configured it as it said, only issue was that the legacy network adapter does not have a setting the instructions mention "Enable spoofing of MAC Addresses". My understand is that before R2, this was on by default. 4) Server is running, web interfaces look good 5) I am trying to connect from a Vista 64 box and cannot 5a) If I set to UPD I am stuck at Authorizing and client log looks like: 10/11/09 15:00:42: INFO: OvpnConfig: connect... 10/11/09 15:00:42: INFO: Gui listen socket at 34567 10/11/09 15:00:42: INFO: sending start command to instantiator... 10/11/09 15:00:42: INFO: start 34567 ?C:\Users\Peter\AppData\Roaming\OpenVPNTech\config?02369512D0C82A04B88093022DA0226202218022A902264022AE022B? 10/11/09 15:00:42: INFO: Got line from MI->>INFO:OpenVPN Management Interface Version 1 -- type 'help' for more info 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 5b) I setup server for tcp and try to connect, I get a loop of authorizing and reconnecting. Log looks like: 10/11/09 15:00:42: INFO: Got line from MI->>HOLD:Waiting for hold release 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: real-time state notification set to ON 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: bytecount interval changed 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold flag set to OFF 10/11/09 15:00:43: INFO: Got line from MI->SUCCESS: hold release succeeded 10/11/09 15:00:43: INFO: Got line from MI->>PASSWORD:Need 'Auth' username/password 10/11/09 15:00:43: INFO: Processing PASSWORD. 10/11/09 15:00:43: INFO: OvpnClient: setting need auth to true. 10/11/09 15:00:43: INFO: OvpnConfig: Setting need auth to true. 10/11/09 15:00:43: INFO: Got auth request from active_config from 0 10/11/09 15:00:47: INFO: Sending Credentials.... 10/11/09 15:00:47: INFO: Sending 25 bytes for username. 10/11/09 15:00:47: INFO: Sent 25 bytes for username. 10/11/09 15:00:47: INFO: Sending 30 bytes for password. 10/11/09 15:00:47: INFO: Sent 30 bytes for password. 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' username entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->SUCCESS: 'Auth' password entered, but not yet verified 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287647,WAIT,,, 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:0,42 10/11/09 15:00:48: INFO: Got line from MI->>BYTECOUNT:54,42 10/11/09 15:00:48: INFO: Got line from MI->>STATE:1255287648,AUTH,,, 10/11/09 15:00:50: INFO: Got line from MI->>BYTECOUNT:2560,2868 10/11/09 15:00:52: INFO: Got line from MI->>BYTECOUNT:2560,3378 10/11/09 15:00:54: INFO: Got line from MI->>BYTECOUNT:2560,3888 ... Is there anyway to turn on robust logging on the server to understand what is happening? Any ideas on how to hunt this down?

  Read the article

• Cannot connect to MySQL Server on RHEL 5.7

  - by Jeffrey Wong

  I have a standard MySQL Server running on Red hat 5.7. I have edited /etc/my.cnf to specify the bind address as my server's public IP address. [mysqld] datadir=/var/lib/mysql socket=/var/lib/mysql/mysql.sock user=mysql # Default to using old password format for compatibility with mysql 3.x # clients (those using the mysqlclient10 compatibility package). old_passwords=1 # Disabling symbolic-links is recommended to prevent assorted security risks ; # to do so, uncomment this line: # symbolic-links=0 [mysqld_safe] log-error=/var/log/mysqld.log pid-file=/var/run/mysqld/mysqld.pid bind-address=171.67.88.25 port=3306 And I have also restarted my firewall sudo /sbin/iptables -A INPUT -i eth0 -p tcp --destination-port 3306 -j ACCEPT /sbin/service iptables save The network administrator has already opened port 3306 for this box. When connecting from a remote computer (running Ubuntu 10.10, server is running RHEL 5.7), I issue mysql -u jeffrey -p --host=171.67.88.25 --port=3306 --socket=/var/lib/mysql/mysql.sock but receive a ERROR 2003 (HY000): Can't connect to MySQL server on '171.67.88.25' (113). I've noticed that the socket file /var/lib/mysql/mysql.sock is blank. Should this be the case? UPDATE The result of netstat -an | grep 3306 tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN Result of sudo netstat -tulpen Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:2208 0.0.0.0:* LISTEN 0 7602 3168/hpiod tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 27 7827 3298/mysqld tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 5110 2802/portmap tcp 0 0 0.0.0.0:8787 0.0.0.0:* LISTEN 0 8431 3326/rserver tcp 0 0 0.0.0.0:915 0.0.0.0:* LISTEN 0 5312 2853/rpc.statd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 7655 3188/sshd tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 7688 3199/cupsd tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 8025 3362/sendmail: acce tcp 0 0 127.0.0.1:2207 0.0.0.0:* LISTEN 0 7620 3173/python udp 0 0 0.0.0.0:909 0.0.0.0:* 0 5300 2853/rpc.statd udp 0 0 0.0.0.0:912 0.0.0.0:* 0 5309 2853/rpc.statd udp 0 0 0.0.0.0:68 0.0.0.0:* 0 4800 2598/dhclient udp 0 0 0.0.0.0:36177 0.0.0.0:* 70 8314 3476/avahi-daemon: udp 0 0 0.0.0.0:5353 0.0.0.0:* 70 8313 3476/avahi-daemon: udp 0 0 0.0.0.0:111 0.0.0.0:* 0 5109 2802/portmap udp 0 0 0.0.0.0:631 0.0.0.0:* 0 7691 3199/cupsd Result of sudo /sbin/iptables -L -v -n Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 6373 2110K RH-Firewall-1-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 RH-Firewall-1-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 1241 packets, 932K bytes) pkts bytes target prot opt in out source destination Chain RH-Firewall-1-INPUT (2 references) pkts bytes target prot opt in out source destination 572 861K ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 1 28 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmp type 255 0 0 ACCEPT esp -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT ah -- * * 0.0.0.0/0 0.0.0.0/0 46 6457 ACCEPT udp -- * * 0.0.0.0/0 224.0.0.251 udp dpt:5353 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:631 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:631 782 157K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 2 120 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:23 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 4970 1086K REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Result of nmap -P0 -p3306 171.67.88.25 Host is up (0.027s latency). PORT STATE SERVICE 3306/tcp filtered mysql Nmap done: 1 IP address (1 host up) scanned in 0.09 seconds Solution When everything else fails, go GUI! system-config-securitylevel and add port 3306. All done!

  Read the article

• COPSSH RSA only authentication connection problem

  - by Siriss

  Hello all- I am trying to setup an RSA Authentication only SSH/SFTP server. The SSH will be used primarily for RDC. Everything works just fine if I use password authentication. I am using Putty Key Generator to create he keys and I have pasted the key into authorized_keys file and restarted the OpenSSH server. I am using FileZilla to test the SFTP connection as that is the most important. For my tests I have created the keys without password correction. It will not work with a standard SSH connection either. It says "Server refused our key". I have recreated the key twice double checking with a guide on google, and I am pretty sure I did it correctly. I load the key file into FileZilla under settings/SFTP and try to connect and I get the following error: Disconnected: No supported authentication methods available. I have been playing with the different settings all night and I cannot figure it out. Here is my sshd_config file: # $OpenBSD: sshd_config,v 1.80 2008/07/02 02:24:18 djm Exp $ # This is the sshd server system-wide configuration file. See # sshd_config(5) for more information. # This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin # The strategy used for options in the default sshd_config shipped with # OpenSSH is to specify options with their default value where # possible, but leave them commented. Uncommented options change a # default value. #Port 22 #AddressFamily any #ListenAddress 0.0.0.0 #ListenAddress :: # Disable legacy (protocol version 1) support in the server for new # installations. In future the default will change to require explicit # activation of protocol 1 Protocol 2 # HostKey for protocol version 1 #HostKey /etc/ssh/ssh_host_key # HostKeys for protocol version 2 #HostKey /etc/ssh/ssh_host_rsa_key #HostKey /etc/ssh/ssh_host_dsa_key # Lifetime and size of ephemeral version 1 server key #KeyRegenerationInterval 1h #ServerKeyBits 1024 # Logging # obsoletes QuietMode and FascistLogging #SyslogFacility AUTH #LogLevel INFO # Authentication: #LoginGraceTime 2m PermitRootLogin no #StrictModes yes #MaxAuthTries 6 #MaxSessions 10 RSAAuthentication yes PubkeyAuthentication yes AuthorizedKeysFile .ssh/authorized_keys # For this to work you will also need host keys in /etc/ssh/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 #HostbasedAuthentication no # Change to yes if you don't trust ~/.ssh/known_hosts for # RhostsRSAAuthentication and HostbasedAuthentication #IgnoreUserKnownHosts no # Don't read the user's ~/.rhosts and ~/.shosts files #IgnoreRhosts yes # To disable tunneled clear text passwords, change to no here! PasswordAuthentication no PermitEmptyPasswords no # Change to no to disable s/key passwords #ChallengeResponseAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes #KerberosGetAFSToken no # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes # Set this to 'yes' to enable PAM authentication, account processing, # and session processing. If this is enabled, PAM authentication will # be allowed through the ChallengeResponseAuthentication and # PasswordAuthentication. Depending on your PAM configuration, # PAM authentication via ChallengeResponseAuthentication may bypass # the setting of "PermitRootLogin without-password". # If you just want the PAM account and session checks to run without # PAM authentication, then enable this but set PasswordAuthentication # and ChallengeResponseAuthentication to 'no'. UsePAM no #AllowAgentForwarding yes #AllowTcpForwarding yes #GatewayPorts no #X11Forwarding no #X11DisplayOffset 10 #X11UseLocalhost yes #PrintMotd yes #PrintLastLog yes #TCPKeepAlive yes UseLogin no #UsePrivilegeSeparation yes #PermitUserEnvironment no #Compression delayed #ClientAliveInterval 0 #ClientAliveCountMax 3 #UseDNS yes #PidFile /var/run/sshd.pid #MaxStartups 10 #PermitTunnel no #ChrootDirectory none # no default banner path #Banner none # override default of no subsystems Subsystem sftp /bin/sftp-server # Example of overriding settings on a per-user basis #Match User anoncvs # X11Forwarding no # AllowTcpForwarding no # ForceCommand cvs server Thank you so much for your help!

  Read the article

• Did a recent WinXP update break CD/DVD read speeds? SP2/SP3

  - by quack quixote

  I have two systems with fresh installations of Windows XP Pro SP3 (SP3 slipstreamed into the installer; fully updated after install). One's a refurbished 2.4GHz Pentium4 system; the other is a new 1.6GHz Atom330 build. Both have brand-new dual-layer CD/DVD burners (one's a LiteOn IDE, the other an LG SATA). Both take a really looooong time to read a single-layer DVD in Windows with Cygwin tools. Specifically, 40 minutes or more. I burn backup data to single-layer DVD+/-R and use MD5 hashes for data verification (made with the standard md5sum tool in Unix or Cygwin). The hashes are burned to disc with the data files, and I use this command to verify: $ cd /path/to/disc/mountpoint ; time md5sum -c < md5.txt Here's how long that takes to run on a full single-layer DVD+/-R disc: Old system (WinXP SP2, 1.8GHz Athlon 2500+, last summer): ~10 minutes Old system (Ubuntu 9.04, 1.8GHz Athlon 2500+): ~10 minutes Old system (Debian 5, dual 550MHz P3): ~10 minutes New Pentium4 system (running Ubuntu 9.04): ~5 minutes New Pentium4 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes New Atom330 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes Now the weird stuff: Old system (WinXP SP2, 1.8GHz Athlon 2500+, today): ~25 minutes New Pentium4 system (running WinXP SP3, read from Cygwin): ~40-50 minutes (?!!) New Atom330 system (running WinXP SP3, read from Cygwin): ~40 minutes (can do it in ~30 minutes ...if i have another program spin up the drive first) Since both systems will copy files in 6 minutes using Windows Explorer, I know it's not a hardware problem. Windows just never spins up the drive during the Cygwin read, so it stays super-slow the whole time. Other programs like EAC and DVD Decrypter seem to spin up the disc just fine during their processing. DMA is enabled on both systems. (Can confirm in Windows' Device Manager on the Atom330, not on the P4.) Nero's DriveSpeed tool doesn't seem to have any effect. Copy times are comparable from commandline with Windows' xcopy. Copying with Cygwin's cp looks more like the problem state -- it will spin up the drive for a short time, never reaches full speed, and lets it spin back down again for most of the copy. What I need is to get full read speeds from Cygwin. Is this a known issue with SP3 or some other recent Windows update? Any other ideas? Update: More testing; Windows will spin up the drive when data is copied with Windows tools, but not when read in place or copied with Cygwin tools. It doesn't make sense to me that Windows spins up the drive for copying, but not for other reads. Might be more of a Cygwin problem? Update 2: GUI activity is sluggish during the problem state -- during the Cygwin verifies, there's a slight but noticable delay when dragging windows or icons around on the desktop, switching windows, Alt-Tabbing through open applications, opening new windows, etc. It reminds me of the delay when opening a Windows Explorer window on My Computer just after inserting a DVD. I've tried updating Cygwin (from 1.5.x to 1.7.x), but no change in the problem behavior. I've also noticed this issue occurs on WinXP SP2, but it's not exactly the same -- some spin-up occurs, so the read happens in ~25-30 minutes instead of 40+. The SP2 system used to run the verifies in ~10 minutes, and when it first changed (not sure exactly when, maybe in late November or early December 2009) I thought it was dying hardware. This is why I suspect an official update of breaking this functionality; this has worked for years on that SP2 box.

  Read the article

• Cheapest way to connect 20-24 Sata II HDDs in a budget storage server?

  - by Joe Hopfgartner

  I need to assemble a high density storage server for as cheap as possible. It's been a while for me and the last systems I integrated didn't even have Sata yet... During my Research I of course stumbled about Nexsan SATA Beast, the BackBlaze storage Pods as well as some ridiculously overpriced HP Proliant or Dell storage solutions. Finally I choose Norco cases as the way to go. My eye is set on the RPC-4020, which is a 4U 19" Rackmount case with 20 Hot Swap 3.5" SATA/SAS Hdd trays (Backplanes included) and room for two 2.5" OS drives as well as a Slim Line CD-Rom. The backplanes connect with a single SATA port for each drive, so there are 20 internal SATA ports to to be connected. They also have redundant power ports which I think is quite nice. The cheapest price I have found is 290$ + 40$ shipping. In europe the cheapest unfortunately is 370€ (500$) + 40 € shipping... A nice alternative would be the RPC-4224 which has SFF-8087 Mini SAS connectors that bundle 4 SATA trays each. But it doesn't seem to be available in Europe (where i am) anywhere. So here comes my problem: What Mainboard/Controller to choose to connect them for as cheap as possible while still having nice data rates? I have to say that the server is intended as a Storage server with 1gps connectivity and the data transfer will be distributed very evenly across all drives. I also don't require any raid functionality. This is all done at application level, I just need JBOD. So for example if I go for the RPC 4020 Model I need to connect 20 Storage + 1 OS + 1 CDROM Sata ports. I searched a bit and stumbled across this very low priced controller: http://www.intel.com/products/server/raid-controllers/SASWT4I/SASWT4I-overview.htm They sell it for 115 € here and the specs say it can control up to 122 hard discs and has 4 Mini SAS connectors. So I would use 4 Mini SAS 36pin - 4 SATA 7pin cables to connect 4 SATA drives to each port and choose a Mainboard taht has 6 SATA on board (for example this one) and hurray, I can connect my 22 SATA devices for as low as about ~ 220 EUR (cpu, ram, psu, case not counted) Question: WOULD THAT WORK? And if not, why? 2nd Question: If I go for the 4220 or 4224 Model, I have internal Mini SAS connectors. Am I right in assuming that the backplane than acts as a "SAS Expander"? And can I just plug these SAS connectors into any SAS port I can find on my controller / mainboard or are there certain requirements? I know that SATA port multipliers only work with controllers that are ready for that. But isn't this expansion already implemented in the SAS standard? I am sorry that this is a very broad question, but I really spent the last week reading up and it seems to be not so clear! Especially all the controlling hardware specifications! 3rd Question: A lot of hardware specs feature "internal channels" and "internal connectors". The connecors are the physical numbers of places where I can plug a cable in. I got that. But are the "internal channels" always the maximum numbers of physical drives that can be used in the end? Or can I enhance this further by Expanders/Fanouts? 4th and last question: What do you think about the setup so far? Do you know any good alternatives? Maby I am completely going the wrong way and some DAS would be way better? Are there any comparable chassis available in europe? Please feel free to say whatever you think is relevant to the subject!

  Read the article

• SBS2003 to SBS2011 Migration - Installation Error

  - by Shawn Gradwell

  Microsoft Small Business Server 2003 to 2011 Migration. I followed the Migration Guide from Microsoft and the source server had no errors when running the various tests prior to the migration. I have completed the destination server setup using the Answer File and the server is up and running. It all looks good, I can access Exchange and AD and the only problem is the error message when you log in stating that the setup did not complete and to check the logs. Because all looks good I am continuing the migration to the destination server. I also have to state that this client does not use Sharepoint at all. Do I have to redo everything? Herewith the logs: [4992] 121016.225454.5905: Task: Starting Add User or Group access VSS registry. [4992] 121016.225454.7645: TaskManagement: In TaskScheduler.RunTasks(): The "ConfigureSharePointVSSRegistryTask" Task threw an Exception during the Run() call:System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) [4992] 121016.225454.7655: Setup: An error was encountered on the TME thread: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter._RunTasks(Object sender, DoWorkEventArgs e) [4956] 121016.225455.0685: Setup: _UnhandledExceptionHandler: Setup encountered an error: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Reflection.TargetInvocationException: The TME thread failed (see the inner exception). ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified) at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.AddUsersToAccessRegistry(List`1 names) at Microsoft.WindowsServerSolutions.IWorker.Tasks.ConfigureSharePointVSSRegistryTask.Run(ITaskDataLink dl) at Microsoft.WindowsServerSolutions.TaskManagement.Data.Task.Run(ITaskDataLink dataLink) at Microsoft.WindowsServerSolutions.TaskManagement.TaskScheduler.RunTasks(String taskListId, String stateFileName) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter._RunTasks(Object sender, DoWorkEventArgs e) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Setup.SBSSetup.ProgressPagePresenter.TasksCompleted(Object sender, RunWorkerCompletedEventArgs e) --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(IRuntimeMethodInfo method, Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeType typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Delegate.DynamicInvokeImpl(Object[] args) at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbacks() at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at Microsoft.WindowsServerSolutions.Common.Wizards.Framework.WizardChainEngine.Launch() at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass._LaunchWizard() at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass.RealMain(String[] args) at Microsoft.WindowsServerSolutions.Setup.SBSSetup.MainClass.Main(String[] args) [4956] 121016.225455.0865: Setup: Removed the password. [4956] 121016.225455.0905: Setup: Deleting scheduled task at path Microsoft\Windows\Windows Small Business Server 2011 Standard with name Setup [4956] 121016.225455.8055: Setup: Removed SBSSetup from the RunOnce.

  Read the article

• fatal error occured while trying to sysprep the machine windows 8.1

  - by Mick

  I try do sysprep in Windows 8.1 I have create unattend.xml <settings pass="oobeSystem"> <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <InputLocale>en-US</InputLocale> <SystemLocale>en-US</SystemLocale> <UILanguage>en-US</UILanguage> <UILanguageFallback>en-US</UILanguageFallback> <UserLocale>en-US</UserLocale> </component> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <OEMInformation> <Manufacturer>XYZ</Manufacturer> <SupportURL>http://www.XYZ.com</SupportURL> </OEMInformation> <OOBE> <HideEULAPage>true</HideEULAPage> <NetworkLocation>Work</NetworkLocation> <ProtectYourPC>1</ProtectYourPC> </OOBE> <UserAccounts> <AdministratorPassword> <Value>XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX</Value> <PlainText>false</PlainText> </AdministratorPassword> <LocalAccounts> <LocalAccount wcm:action="add"> <Password> <Value>XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX</Value> <PlainText>false</PlainText> </Password> <Description>Admin</Description> <DisplayName>Admin</DisplayName> <Group>Administrators</Group> <Name>Admin</Name> </LocalAccount> </LocalAccounts> </UserAccounts> <WindowsFeatures> <ShowWindowsMediaPlayer>false</ShowWindowsMediaPlayer> <ShowMediaCenter>false</ShowMediaCenter> </WindowsFeatures> <RegisteredOrganization>XXXXXXXXXXXXXXXXXXXXX</RegisteredOrganization> <RegisteredOwner>XXXXXXXXXXXXXXXXXXXXXXX</RegisteredOwner> <TimeZone>Central European Standard Time</TimeZone> <ShowWindowsLive>false</ShowWindowsLive> </component> </settings> <settings pass="specialize"> <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <RegisteredOrganization>XXXXXXXXXXXXXXXXXXXXXXXXX</RegisteredOrganization> <RegisteredOwner>XXXXXXXXXXXXXXXXXXXXXXXXXX</RegisteredOwner> <ProductKey>XXXXXXXXXXXXXXXXXXXXXXXXXXXXX</ProductKey> </component> </settings> And then I run sysprep.exe /oobe /generalize /shutdown I see this error: fatal error occurred while trying to sysprep the machine

  Read the article

• Motion - can't get streaming working from a webcam

  - by Emmanuel Brunet

  I'm trying to record a video stream from my Tenvis IP camera with motion 3.2.12 on Debian 7.5. I used the standard debian package with sudo apt-get install motion Assume my DNS IP cam is webcam, user : admin, password : password /etc/motion/motion.conf Bellow are my configuration file settings : netcam_url http://webcam/videostream.cgi netcam_userpass admin:password target_dir /media/videos/log/motion # The mini-http server listens to this port for requests (default: 0 = disabled) webcam_port 1234 ffmpeg_cap_new on ffmpeg_video_codec mpeg4 output_motion off snapshot_interval 0 # Quality of the jpeg (in percent) images produced (default: 50) webcam_quality 50 # Output frames at 1 fps when no motion is detected and increase to the # rate given by webcam_maxrate when motion is detected (default: off) webcam_motion on # Maximum framerate for webcam streams (default: 1) webcam_maxrate 15 # Restrict webcam connections to localhost only (default: on) webcam_localhost on # Limits the number of images per connection (default: 0 = unlimited) # Number can be defined by multiplying actual webcam rate by desired number of seconds # Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate webcam_limit 0 control_port 8080 control_authentication admin:password Issue #1 when I try display http:/localhost:1234 the browser looks frozen, no HTTP 404 received but it stills waiting for data it seems .. Issue #2 in the output directory motion writes a lot of jpeg snapshots althought I just want to have several video sequenced files. Log I run motion in interactive mode in a terminal, here is the ouput root@mercure:/etc/motion# motion -c motion-1.0.conf [0] Processing thread 0 - config file motion-1.0.conf [0] Motion 3.2.12 Started [0] ffmpeg LIBAVCODEC_BUILD 3482368 LIBAVFORMAT_BUILD 3478785 [0] Thread 1 is from motion-1.0.conf [0] motion-httpd/3.2.12 running, accepting connections [0] motion-httpd: waiting for data on port TCP 8080 [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 [1] avcodec_open - could not open codec: Operation now in progress [1] ffopen_open error creating (new) file [~/tmp/motion/01-20140603165303.avi]: Operation now in progress [1] File of type 1 saved to: ~/tmp/motion/01-20140603165303-01.jpg [1] Thread exiting [1] Calling vid_close() from motion_cleanup [1] vid_close: calling netcam_cleanup [1] netcam camera handler: finish set, exiting [0] Motion thread 1 restart [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 [1] avcodec_open - could not open codec: Resource temporarily unavailable [1] ffopen_open error creating (new) file [~/tmp/motion/01-20140603165329.avi]: Resource temporarily unavailable [1] File of type 1 saved to: ~/tmp/motion/01-20140603165329-00.jpg [1] Thread exiting [1] Calling vid_close() from motion_cleanup [1] vid_close: calling netcam_cleanup [1] netcam camera handler: finish set, exiting [0] Motion thread 1 restart [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 [1] avcodec_open - could not open codec: Connection reset by peer [1] ffopen_open error creating (new) file [~/tmp/motion/01-20140603165355.avi]: Connection reset by peer [1] File of type 1 saved to: ~/tmp/motion/01-20140603165355-06.jpg [1] Thread exiting [1] Calling vid_close() from motion_cleanup [1] vid_close: calling netcam_cleanup [0] httpd - Finishing [0] httpd Closing [0] httpd thread exit [1] netcam camera handler: finish set, exiting [0] Motion thread 1 restart [1] Thread 1 started [1] Resizing pre_capture buffer to 1 items [1] Started stream webcam server in port 1234 It doesn't find the codec ... avcodec_open - could not open codec: Operation now in progress I've changed fmpeg_video_codec from mpeg4 to swf the result is the same. When using flv format motion writes a lot of .jpg image but I can't see anything at http://localhost:1234 [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-00.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-01.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-02.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-03.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-04.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-05.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171035-06.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171036-00.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171036-01.jpg [1] File of type 1 saved to: ~/tmp/motion/01-20140603171036-02.jpg Any idea just to get the video stream recoded on my local disk ?

  Read the article

< Previous Page | 389 390 391 392 393 394 395 396 397 398 399 400  | Next Page >