Search Results

Search found 111 results on 5 pages for 'tilemap'.

Page 4/5 | < Previous Page | 1 2 3 4 5  | Next Page >

• Procedual level generation for a platformer game (tilebased) using player physics

  - by Notbad

  I have been searching for information about how to build a 2d world generator (tilebased) for a platformer game I am developing. The levels should look like dungeons with a ceiling and a floor and they will have a high probability of being just made of horizontal rooms but sometimes they can have exits to a top/down room. Here is an example of what I would like to achieve. I'm refering only to the caves part. I know level design won't be that great when generated but I think it is possible to have something good enough for people to enjoy the procedural maps (Note: Supermetrod Spoiler!): http://www.snesmaps.com/maps/SuperMetroid/SuperMetroidMapNorfair.html Well, after spending some time thinking about this I have some ideas to create the maps that I would like to share with you: 1) I have read about celular automatas and I would like to use them to carve the rooms but instead of carving just a tile at once I would like to carve full columns of tiles. Of course this carving system will have some restrictions like how many tiles must be left for the roof and the ceiling, etc... This way I could get much cleaner rooms than using the ussual automata. 2) I want some branching into the rooms. It will have little probability to happen but I definitely want it. Thinking about carving I came to the conclusion that I could be using some sort of path creation algorithm that the carving system would follow to create a path in the rooms. This could be more noticiable if we make the carving system to carve columns with the height of a corridor or with the height of a wide room (this will be added to the system as a param). This way at some point I could spawn a new automa beside the main one to create braches. This new automata should play side by side with the first one to create dead ends, islands (both paths created by the automatas meet at some point or lead to the same room. It would be too long to explain here all the tests I have done, etc... just will try to summarize the problems to see if anyone could bring some light to solve them (I don't mind sharing my successes but I think they aren't too relevant): 1) Zone reachability: How can I make sure that the player will be able to reach all zones I created (mainly when branches happen or vertical rooms are created). When branches are created I have to make sure that there will be a way to get onto the new created branch. I mean a bifurcation that the player could follow. Player will follow the main path or jump to a platform to get onto the other way). On the other hand if an island is created by the meeting of both branches I need to make sure the player will be able to get onto the island too. 2) When a branch is created and corridors are generated for each branch how can I make then both merge or repel to create an island or just make them separated corridors. 3) When I create a branch and an island is created becasue both corridors merge at somepoint or they lead to the same room, is there any way to detect this and randomize where to create the needed platforms to get onto the created isle? This platforms could be created at the start of the island or at the end. I guess part of the problem could be solved using some sort of graph following the created paths but I'm a bit lost in this sea of precedural content creation :). On the other hand I don't expect a solution to the problem but some information to get me moving forward again. Thanks in advance.

  Read the article

• 3D array in a 2D array

  - by Smallbro

  Currently I've been using a 3D array for my tiles in a 2D world but the 3D side comes in when moving down into caves and whatnot. Now this is not memory efficient and I switched over to a 2D array and can now have much larger maps. The only issue I'm having now is that it seems that my tiles cannot occupy the same space as a tile on the same z level. My current structure means that each block has its own z variable. This is what it used to look like: map.blockData[x][y][z] = new Block(); however now it works like this map.blockData[x][y] = new Block(z); I'm not sure why but if I decide to use the same space on say the floor below it wont allow me to. Does anyone have any ideas on how I can add a z-axis to my 2D array? I'm using java but I reckon the concept carries across different languages.

  Read the article

• How can I create a flexible system for tiling a 2D RPG map?

  - by CptSupermrkt

  Using libgdx here. I've just finished learning some of the basics of creating a 2D environment and using an OrthographicCamera to view it. The tutorials I went through, however, hardcoded their tiled map in, and none made mention of how to do it any other way. By tiled map, I mean like Final Fantasy 1, where the world map is a grid of squares, each with a different texture. So for example, I've got a 6 tile x 6 tile map, using the following code: Array<Tile> tiles = new Array<Tile>(); tiles.add(new Tile(new Vector2(0,5), TileType.FOREST)); tiles.add(new Tile(new Vector2(1,5), TileType.FOREST)); tiles.add(new Tile(new Vector2(2,5), TileType.FOREST)); tiles.add(new Tile(new Vector2(3,5), TileType.GRASS)); tiles.add(new Tile(new Vector2(4,5), TileType.STONE)); tiles.add(new Tile(new Vector2(5,5), TileType.STONE)); //... x5 more times. Given the random nature of the environment, for loops don't really help as I have to start and finish a loop before I was able to do enough to make it worth setting up the loop. I can see how a loop might be helpful for like tiling an ocean or something, but not in the above case. The above code DOES get me my final desired output, however, if I were to decide I wanted to move a piece or swap two pieces out, oh boy, what a nightmare, even with just a 6x6 test piece, much less a 1000x1000 world map. There must be a better way of doing this. Someone on some post somewhere (can't find it now, of course) said to check out MapEditor. Looks legit. The question is, if that is the answer, how can I make something in MapEditor and have the output map plug in to a variable in my code? I need the tiles as objects in my code, because for example, I determine whether or not a tile is can be passed through or collided with based on my TileTyle enum variable. Are there alternative/language "native" (i.e. not using an outside tool) methods to doing this?

  Read the article

• Can i place a image as a map and then code a grid over the top of it?

  - by kraze

  what i'm trying to do is make a huge map, best way i found is just make a big map and save it as a image... can i code a grid over the top so i can implement tile based movement for my character? afterwards place collision tiles so they can't move to certain spots. btw this is in visual studio 2010 using XNA Anyone able to explain the process of how i would do this and if its even viable? thanks for your help

  Read the article

• Best way to solve tile drawing in 2D side scroller?

  - by TheCompBoy

  What i still can't figure out is which would be the more sane way / easier and faster way to draw the map on the screen.. I mean i will use many tiles for my maps in my side scroller.. But problem is should i make the maps in whole images like one .png file for each map (Example) or should i draw the tiles by code like a for loop in c++.. Which way is most recomended or where can i read about which way is the best.

  Read the article

• 3d js map rendering

  - by gotha

  In the past I've done a 2D tile map using HTML, CSS and Javascript. Now I have the task of creating a 3D version using the same technologies - think of it like a space map where all planets have x/y/z positions. Currently, I have no idea to do this. Is there an existing library or something I can modify to do my job? If not, what method of rendering the map should I use? It needs to be as browser independent as possible, so I can't use webgl, flash or canvas. I'm considering plain JS & HTML or SVG (using Raphael for compatibility).

  Read the article

• Data structures for a 3D array

  - by Smallbro

  Currently I've been using a 3D array for my tiles in a 2D world but the 3D side comes in when moving down into caves and whatnot. Now this is not memory efficient and I switched over to a 2D array and can now have much larger maps. The only issue I'm having now is that it seems that my tiles cannot occupy the same space as a tile on the same z level. My current structure means that each block has its own z variable. This is what it used to look like: map.blockData[x][y][z] = new Block(); however now it works like this map.blockData[x][y] = new Block(z); I'm not sure why but if I decide to use the same space on say the floor below it wont allow me to. Does anyone have any ideas on how I can add a z-axis to my 2D array? I'm using java but I reckon the concept carries across different languages.

  Read the article

• Possible to map mouse coordinates to isometric tiles with this coordinate system?

  - by plukich

  I'm trying to implement mouse interaction in a 2d isometric game, but I'm not sure if it's possible given the coordinate system used for tile maps in the game. I've read some helpful articles like this one: How to convert mouse coordinates to isometric indexes? However, this game's coordinate system is "jagged" for lack of a better word, and looks like this: Is it even possible to map mouse coordinates to this successfully, since the y-axis can't be drawn on this tile-map as a straight line? I've thought about doing odd-y-value translations and even-y-value translations with two different matricies, but that only makes sense going from tile-screen.

  Read the article

• Tile transitions - external vs internal

  - by omgnoseat

  I've been looking at a couple of games and noticed that the transitions between tiles are handled somewhat different. I was wondering which methods are to be used in different situations and why. I'm currently using internal edges in a top-down game, and it's working out so far. But I don't want to run into problems later on, and have to redo the whole tileset. I noticed that platforming games mostly use the internal edges, and top-down games mostly use external and hybrid transitions. I can see how these tiles are used to create "depth" in top-down games, where the player apears to be standing in front of a wall for example. But it seems unlikely that such a small feature decides the entire method for tile transitions. You could always alter the bounding box to create the same effect.

  Read the article

• Existent js libs for tileset / map loading and rendering?

  - by ylluminate

  I'm building an rts style overhead tileset game with JavaScript (particularly using Ember.js framework as a base). The map is so large that I'd very much like to be able to load and render the board and layered items in a Google Maps'esque. I'm curious as to whether there are existing libs that would be helpful and already well thought out in these regards vs trying to reinvent the wheel. Are there any such libraries or code examples that would be useful in this area of board / map management?

  Read the article

• How to draw a map for the game?

  - by user36689

  I wanted to make a small game, it will be about space. But I had a couple of questions, how to draw a map for the game? I would like to have lots of planets, possible consolidation of the system (as the solar system) But how to draw these planets? Is it really necessary to draw them by hand? I plan to give the names of the planets, but maybe I will not do what is best to do? Prompt Council Help me, please) I'm sorry if that is not the case)) Thanks in advance!

  Read the article

• TileMap in Sprite kit tile size issue

  - by TazmanNZL

  I am loading a TMX tile map into sprite kit using JSTileMap and the issue I am having is that if I use a tileSet.png the tiles appear too big when displayed. If I use a [email protected] the tiles appear the correct size but my tmx map does not show correctly instead all I see is the tileSet in a grid. I have tried renaming the [email protected] to tileSet.png but once again the tiles appear too big. Can I use a [email protected] with JSTileMap? The tiles in both png files are 128x128 Any help is appreciated.

  Read the article

• What is a good way to store tilemap data?

  - by Stephen Tierney

  I'm developing a 2D platformer with some uni friends. We've based it upon the XNA Platformer Starter Kit which uses .txt files to store the tile map. While this is simple it does not give us enough control and flexibility with level design. Some examples: for multiple layers of content multiple files are required, each object is fixed onto the grid, doesn't allow for rotation of objects, limited number of characters etc. So I'm doing some research into how to store the level data and map file. This concerns only the file system storage of the tile maps, not the data structure to be used by the game while it is running. The tile map is loaded into a 2D array, so this question is about which source to fill the array from. Reasoning for DB: From my perspective I see less redundancy of data using a database to store the tile data. Tiles in the same x,y position with the same characteristics can be reused from level to level. It seems like it would simple enough to write a method to retrieve all the tiles that are used in a particular level from the database. Reasoning for JSON/XML: Visually editable files, changes can be tracked via SVN a lot easier. But there is repeated content. Do either have any drawbacks (load times, access times, memory etc) compared to the other? And what is commonly used in the industry? Currently the file looks like this: .................... .................... .................... .................... .................... .................... .................... .........GGG........ .........###........ .................... ....GGG.......GGG... ....###.......###... .................... .1................X. #################### 1 - Player start point, X - Level Exit, . - Empty space, # - Platform, G - Gem

  Read the article

• (Unity)Getting a mirrored mesh from my data structure

  - by Steve

  Here's the background: I'm in the beginning stages of an RTS game in Unity. I have a procedurally generated terrain with a perlin-noise height map, as well as a function to generate a river. The problem is that the graphical creation of the map is taking the data structure of the map and rotating it by 180 degrees. I noticed this problem when i was creating my rivers. I would set the River's height to flat, and noticed that the actual tiles that were flat in the graphical representation were flipped and mirrored. Here's 3 screenshots of the map from different angles: http://imgur.com/a/VLHHq As you can see, if you flipped (graphically) the river by 180 degrees on the z axis, it would fit where the terrain is flattened. I have a suspicion it is being caused by a misunderstanding on my part of how vertices work. Alas, here is a snippet of the code that is used: This code here creates a new array of Tile objects, which hold the information for each tile, including its type, coordinate, height, and it's 4 vertices public DTileMap (int size_x, int size_y) { this.size_x = size_x; this.size_y = size_y; //Initialize Map_Data Array of Tile Objects map_data = new Tile[size_x, size_y]; for (int j = 0; j < size_y; j++) { for (int i = 0; i < size_x; i++) { map_data [i, j] = new Tile (); map_data[i,j].coordinate.x = (int)i; map_data[i,j].coordinate.y = (int)j; map_data[i,j].vertices[0] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -j * GTileMap.TileMap.tileSize); map_data[i,j].vertices[1] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[2] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[3] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); } } This code sets the river tiles to height 0 foreach (Tile t in map_data) { if (t.realType == "Water") { t.vertices[0].y = 0f; t.vertices[1].y = 0f; t.vertices[2].y = 0f; t.vertices[3].y = 0f; } } And below is the code to generate the actual graphics from the data: public void BuildMesh () { DTileMap.DTileMap map = new DTileMap.DTileMap (size_x, size_z); int numTiles = size_x * size_z; int numTris = numTiles * 2; int vsize_x = size_x + 1; int vsize_z = size_z + 1; int numVerts = vsize_x * vsize_z; // Generate the mesh data Vector3[] vertices = new Vector3[ numVerts ]; Vector3[] normals = new Vector3[numVerts]; Vector2[] uv = new Vector2[numVerts]; int[] triangles = new int[ numTris * 3 ]; int x, z; for (z=0; z < vsize_z; z++) { for (x=0; x < vsize_x; x++) { normals [z * vsize_x + x] = Vector3.up; uv [z * vsize_x + x] = new Vector2 ((float)x / size_x, 1f - (float)z / size_z); } } for (z=0; z < vsize_z; z+=1) { for (x=0; x < vsize_x; x+=1) { if (x == vsize_x - 1 && z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z - 1].vertices [3]; } else if (z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z - 1].vertices [2]; } else if (x == vsize_x - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z].vertices [1]; } else { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [0]; vertices [z * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [1]; vertices [(z+1) * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [2]; vertices [(z+1) * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [3]; } } } } for (z=0; z < size_z; z++) { for (x=0; x < size_x; x++) { int squareIndex = z * size_x + x; int triOffset = squareIndex * 6; triangles [triOffset + 0] = z * vsize_x + x + 0; triangles [triOffset + 2] = z * vsize_x + x + vsize_x + 0; triangles [triOffset + 1] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 3] = z * vsize_x + x + 0; triangles [triOffset + 5] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 4] = z * vsize_x + x + 1; } } // Create a new Mesh and populate with the data Mesh mesh = new Mesh (); mesh.vertices = vertices; mesh.triangles = triangles; mesh.normals = normals; mesh.uv = uv; // Assign our mesh to our filter/renderer/collider MeshFilter mesh_filter = GetComponent<MeshFilter> (); MeshCollider mesh_collider = GetComponent<MeshCollider> (); mesh_filter.mesh = mesh; mesh_collider.sharedMesh = mesh; calculateMeshTangents (mesh); BuildTexture (map); } If this looks familiar to you, its because i got most of it from Quill18. I've been slowly adapting it for my uses. And please include any suggestions you have for my code. I'm still in the very early prototyping stage.

  Read the article

• Getting a mirrored mesh from my data structure

  - by Steve

  Here's the background: I'm in the beginning stages of an RTS game in Unity. I have a procedurally generated terrain with a perlin-noise height map, as well as a function to generate a river. The problem is that the graphical creation of the map is taking the data structure of the map and rotating it by 180 degrees. I noticed this problem when I was creating my rivers. I would set the River's height to flat, and noticed that the actual tiles that were flat in the graphical representation were flipped and mirrored. Here's 3 screenshots of the map from different angles: http://imgur.com/a/VLHHq As you can see, if you flipped (graphically) the river by 180 degrees on the z axis, it would fit where the terrain is flattened. I have a suspicion it is being caused by a misunderstanding on my part of how vertices work. Alas, here is a snippet of the code that is used: This code here creates a new array of Tile objects, which hold the information for each tile, including its type, coordinate, height, and it's 4 vertices public DTileMap (int size_x, int size_y) { this.size_x = size_x; this.size_y = size_y; //Initialize Map_Data Array of Tile Objects map_data = new Tile[size_x, size_y]; for (int j = 0; j < size_y; j++) { for (int i = 0; i < size_x; i++) { map_data [i, j] = new Tile (); map_data[i,j].coordinate.x = (int)i; map_data[i,j].coordinate.y = (int)j; map_data[i,j].vertices[0] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -j * GTileMap.TileMap.tileSize); map_data[i,j].vertices[1] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[2] = new Vector3 (i * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); map_data[i,j].vertices[3] = new Vector3 ((i+1) * GTileMap.TileMap.tileSize, map_data[i,j].Height, -(j-1) * GTileMap.TileMap.tileSize); } } This code sets the river tiles to height 0 foreach (Tile t in map_data) { if (t.realType == "Water") { t.vertices[0].y = 0f; t.vertices[1].y = 0f; t.vertices[2].y = 0f; t.vertices[3].y = 0f; } } And below is the code to generate the actual graphics from the data: public void BuildMesh () { DTileMap.DTileMap map = new DTileMap.DTileMap (size_x, size_z); int numTiles = size_x * size_z; int numTris = numTiles * 2; int vsize_x = size_x + 1; int vsize_z = size_z + 1; int numVerts = vsize_x * vsize_z; // Generate the mesh data Vector3[] vertices = new Vector3[ numVerts ]; Vector3[] normals = new Vector3[numVerts]; Vector2[] uv = new Vector2[numVerts]; int[] triangles = new int[ numTris * 3 ]; int x, z; for (z=0; z < vsize_z; z++) { for (x=0; x < vsize_x; x++) { normals [z * vsize_x + x] = Vector3.up; uv [z * vsize_x + x] = new Vector2 ((float)x / size_x, 1f - (float)z / size_z); } } for (z=0; z < vsize_z; z+=1) { for (x=0; x < vsize_x; x+=1) { if (x == vsize_x - 1 && z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z - 1].vertices [3]; } else if (z == vsize_z - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z - 1].vertices [2]; } else if (x == vsize_x - 1) { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x - 1, z].vertices [1]; } else { vertices [z * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [0]; vertices [z * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [1]; vertices [(z+1) * vsize_x + x] = DTileMap.DTileMap.map_data [x, z].vertices [2]; vertices [(z+1) * vsize_x + x+1] = DTileMap.DTileMap.map_data [x, z].vertices [3]; } } } } for (z=0; z < size_z; z++) { for (x=0; x < size_x; x++) { int squareIndex = z * size_x + x; int triOffset = squareIndex * 6; triangles [triOffset + 0] = z * vsize_x + x + 0; triangles [triOffset + 2] = z * vsize_x + x + vsize_x + 0; triangles [triOffset + 1] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 3] = z * vsize_x + x + 0; triangles [triOffset + 5] = z * vsize_x + x + vsize_x + 1; triangles [triOffset + 4] = z * vsize_x + x + 1; } } // Create a new Mesh and populate with the data Mesh mesh = new Mesh (); mesh.vertices = vertices; mesh.triangles = triangles; mesh.normals = normals; mesh.uv = uv; // Assign our mesh to our filter/renderer/collider MeshFilter mesh_filter = GetComponent<MeshFilter> (); MeshCollider mesh_collider = GetComponent<MeshCollider> (); mesh_filter.mesh = mesh; mesh_collider.sharedMesh = mesh; calculateMeshTangents (mesh); BuildTexture (map); } If this looks familiar to you, its because i got most of it from Quill18. I've been slowly adapting it for my uses. And please include any suggestions you have for my code. I'm still in the very early prototyping stage.

  Read the article

• World Location issues with camera and particle

  - by Joe Weeks

  I have a bit of a strange question, I am adapting the existing code base including the tile engine as per the book: XNA 4.0 Game Development by example by Kurt Jaegers, particularly the aspect that I am working on is the part about the 2D platformer in the last couple of chapters. I am creating a platformer which has a scrolling screen (similar to an old school screen chase), I originally did not have any problems with this aspect as it is simply a case of updating the camera position on the X axis with game time, however I have since added a particle system to allow the players to fire weapons. This particle shot is updated via the world position, I have translated everything correctly in terms of the world position when the collisions are checked. The crux of the problem is that the collisions only work once the screen is static, whilst the camera is moving to follow the player, the collisions are offset and are hitting blocks that are no longer there. My collision for particles is as follows (There are two vertical and horizontal): protected override Vector2 horizontalCollisionTest(Vector2 moveAmount) { if (moveAmount.X == 0) return moveAmount; Rectangle afterMoveRect = CollisionRectangle; afterMoveRect.Offset((int)moveAmount.X, 0); Vector2 corner1, corner2; // new particle world alignment code. afterMoveRect = Camera.ScreenToWorld(afterMoveRect); // end. if (moveAmount.X < 0) { corner1 = new Vector2(afterMoveRect.Left, afterMoveRect.Top + 1); corner2 = new Vector2(afterMoveRect.Left, afterMoveRect.Bottom - 1); } else { corner1 = new Vector2(afterMoveRect.Right, afterMoveRect.Top + 1); corner2 = new Vector2(afterMoveRect.Right, afterMoveRect.Bottom - 1); } Vector2 mapCell1 = TileMap.GetCellByPixel(corner1); Vector2 mapCell2 = TileMap.GetCellByPixel(corner2); if (!TileMap.CellIsPassable(mapCell1) || !TileMap.CellIsPassable(mapCell2)) { moveAmount.X = 0; velocity.X = 0; } return moveAmount; } And the camera is pretty much the same as the one in the book... with this added (as an early test). public static void Update(GameTime gameTime) { position.X += 1; }

  Read the article

• Continuing JavaScript "classes" - enums within

  - by espais

  From a previous question, I have the following: So I have implemented a resource class, now I'd like to continue extending it and add all my constants and enums (or as far as JS will allow...). This is what I currently have: var resources = { // images player : new c_resource("res/player.png"), enemies : new c_resource("res/enemies.png"), tilemap : new c_resource("res/tilemap.png") }; And this is what I would like to continue to extend it to: var resources = { // images player : new c_resource("res/player.png"), enemies : new c_resource("res/enemies.png"), tilemap : new c_resource("res/tilemap.png"), // enums directions : {up:0, right:1, down:2, left:3}, speeds : {slow: 1, medium: 3, fast: 5} }; ... function enemies() { this.dir = resources.directions.down; // initialize to down } When I attempt to access resources.directions.up, my JS script goes down in a flaming pile of burning code. Are enums allowed in this context, and if not, how can I properly insert them to be used outside of a normal function? I have also tried defining them as global to a similar effect. edits: fixed the comma...that was just an error in transcribing it. When I run it in Firefox and watch the console, I get an error that says resources is undefined. The resources 'class' is defined at the top of my script, and function enemies() directly follows...so from what I understand it should still be in scope...

  Read the article

• how to implemet a nice scanline effect using libgdx

  - by Alexandre GUIDET

  I am working on an old school platformer based on libgdx. My first attempt is to make a little texture and fill a rect above the whole screen, but it seems that I am messing arround with the orthographic camera (I use two camera, one for the tilemap and one to project the scanline filter). Sometime the texture is stuck on the tilemap and sometime it is too large and cover the whole screen in black. Is my approach correct using two camera? Does someone have a solution to achieve this retro effect using libgdx (see maldita castilla)? Thanks

  Read the article

• Help implementing virtual d-pad

  - by Moshe

  Short Version: I am trying to move a player around on a tilemap, keeping it centered on its tile, while smoothly controlling it with SneakyInput virtual Joystick. My movement is jumpy and hard to control. What's a good way to implement this? Long Version: I'm trying to get a tilemap based RPG "layer" working on top of cocos2d-iphone. I'm using SneakyInput as the input right now, but I've run into a bit of a snag. Initially, I followed Steffen Itterheim's book and Ray Wenderlich's tutorial, and I got jumpy movement working. My player now moves from tile to tile, without any animation whatsoever. So, I took it a step further. I changed my player.position to a CCMoveTo action. Combined with CCfollow, my player moves pretty smoothly. Here's the problem, though: Between each CCMoveTo, the movement stops, so there's a bit of a jumpiness introduced between movements. To deal with that, I changed my CCmoveTo into a CCMoveBy, and instead of running it once, I decided to have it CCRepeatForever. My plan was to stop the repeating action whenever the player changed directions or released the d-pad. However, when the movement stops, the player is not necessarily centered along the tiles, as it should be. To correctly position the player, I use a CCMoveTo and get the closest position that would put the player back into the proper position. This reintroduces an earlier problem of jumpiness between actions. What is the correct way to implement a smooth joystick while smoothly animating the player and keeping it on the "grid" of tiles? Edit: It turns out that this was caused by a "Bug Fix" in the cocos2d engine.

  Read the article

• Making an interactive 2D map

  - by Chad

  So recently I have been working on a Legend of Zelda: A Link to the Past clone, and I am wondering how I could handle certain map interactions (like cutting grass, lifting rocks, etc). The way I am currently doing the tilemap is with 2 PNGs. The first is the "tilemap" where each pixel represents a 16x16 tile and the (red, green) values are the (x, y) coords for the tile in the second PNG (the "tileset"). I am then using the blue channel to store collision data. Each tile is split into 4 8x8 tiles and represented by a 2 bit value (0 = empty, 1 = Jumpdown point, 2 = unused right now, 3 = blocking). 4 of these 2 bit values make up the full blue channel (1 byte). So collisions work great, and I am moving on to putting interactive units on the level; but I am not sure what a good way is to do it. I have experimented with spawning an entity for each grass and rock, but there are just WAY to many; FPS just dies even if I confine it to the current "zone" the user is in (for those who remember LTTP it had zones you moved between). It does make a difference that this is a browser-based JavaScript game. tl;dr: What is a good way to have an interactive map without using full blown entities for each interactive item?

  Read the article

• Code Structure / Level Design: Plants vs Zombies game level dissection

  - by lalan

  Hi Friends, I am interested in learning the class structure of Plants vs Zombies, particularly level design; for those who haven't played it - this video contains nice play-through: http://www.youtube.com/watch?v=89DfdOIJ4xw. How would I go ahead and design the code, mostly structure & classes, which allows for maximum flexibility & clean development? I am familiar with data driven design concepts, and would use events to handle most of dynamic behavior. Dissection at macro level: (Once every Level) Load tilemap, props, etc -- basically build the map (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) Show Enemies you'll face during present level (Once every Level) Unit Selection Window/Panel - selection of defensive plants (Once every Level) Camera Movement - might consider it as short cut-scene (Once every Level) HUD Creation - based on unit selection (Level Loop) Enemy creation - based on types of zombies allowed (Level Loop) Sun/Resource generation (Level Loop) Show messages like 'huge wave of zombies coming', 'final wave' (Level Loop) Other unique events - Spawn gifts, money, tombstones, etc (Once every Level) Unlock new plant Potential game scripts: a) Level definitions: Level_1_1.xml, Level_1_2.xml, etc. Level_1_1.xml :: Sample script <map> <tilemap>tilemapFrontLawn</tilemap> <SpawnPoints> tiles where particular type of zombies (land vs water) may spawn</spawnPoints> <props> position, entity array -- lawnmower, </props> </map> <zombies> <... list of zombies who gonna attack by ids...> </zombies> <plants> <... list by plants which are available for defense by ids...> </plants> <progression> <ZombieWave name='first wave' spawnScript='zombieLightWave.lua' unlock='null'> <startMessages time=1.5>Ready</startMessages> <endMessages time=1.5>Huge wave of zombies incoming</endMessages> </ZombieWave> </progression> b) Entities definitions: .xmls containing zombies, plants, sun, lawnmower, coins, etc description. Potential classes: //LevelManager - Based on the level under play, it will load level script. Few of the // functions it may have: class LevelManager { public: bool load(string levelFileName); bool enter(); bool update(float deltatime); bool exit(); private: LevelData* mLevelData; } // LevelData - Contains the details of level loaded by LevelManager. class LevelData { private: string file; // array of camera,dialog,attackwaves, etc in active level LevelCutSceneCamera** mArrayCutSceneCamera; LevelCutSceneDialog** mArrayCutSceneDialog; LevelAttackWave** mArrayAttackWave; .... // which camera,dialog,attackwave is active in level uint mCursorCutSceneCamera; uint mCursorCutSceneDialog; uint mCursorAttackWave; public: // based on cursor, get the next camera,dialog,attackwave,etc in active level // return false/true based on failure/success bool nextCutSceneCamera(LevelCutSceneCamera**); bool nextCutSceneDialog(LevelCutSceneDialog**); } // LevelUnderPlay- LevelManager class LevelUnderPlay { private: LevelCutSceneCamera* mCutSceneCamera; LevelCutSceneDialog* mCutSceneDialog; LevelAttackWave* mAttackWave; Entities** mSelectedPlants; Entities** mAllowedZombies; bool isCutSceneCameraActive; public: bool enter(); bool update(float deltatime); bool exit(); } I am totally confused.. :( Does it make sense of using class composition (have flat class hierarchy) for managing levels. Is it a good idea to just add/remove/update sprites (or any drawable stuff) to current scene from LevelManager or LevelUnderPlay? If I want to make non-linear level design, how should I go ahead? Perhaps I would need a LevelProgression class, which would decide what to do based on decision tree. Any suggestions would be appreciated very much. Thank for your time, lalan

  Read the article

• Getting isometric grid coordinates from standard X,Y coordinates

  - by RoryHarvey

  I'm currently trying to add sprites to an isometric Tiled TMX map using Objects in cocos2d. The problem is the X and Y metadata from TMX object are in standard 2d format (pixels x, pixels y), instead of isometric grid X and Y format. Usually you would just divide them by the tile size, but isometric needs some sort of transform. For example on a 64x32 isometric tilemap of size 40 tiles by 40 tiles an object at (20,21)'s coordinates come out as (640,584) So the question really is what formula gets (20,21) from (640,584)?

  Read the article

• Cocos2d iOS A* Star Path finding help

  - by user32581

  Hello I need help implementing this class https://github.com/sqlboy/tiled-games/tree/master/src into my iOS game. Im using the suggested code of: AStarPathFinder pathFinder = [[AStarPathFinder alloc] initWithTileMap:tileMap collideLayer:@"collide"]; // Optionally, you can set the name of the collide property key and the value it expects. [pathFinder setCollideKey:@"collidable"] // defaults to COLLIDE [pathFinder setCollideValue:@"True"] // defaults to 1 // highlight a path (src and dst are tile coorindates) [pathFinder highlightPathFrom:srcTile to:dstTile]; // move a sprite [pathFinder moveSprite:player from:srcTile to:dstTile atSpeed:0.1f]; I get the following error: Instance method '-initWithTileMap:collideLayer:' not found (return defaults to 'id') This is the official post for the class: http://www.cocos2d-iphone.org/forums/topic/just-pushed-a-cctmxtiledmap-a-pathfinding-class-to-github/ The only other code I added was: #import "AStarPathFinder.h" I think I am perhaps missing something! I am grateful for any help!

  Read the article

• How do I load tmx files with Slick2d?

  - by mbreen

  I just started using Slick2D and learned how simple it is to load in a tilemap and display it. I tried atleast a dozen different tmx files from numerous examples to see if it was the actual file that was corrupted. Everytime I get this error: Exception in thread "main" java.lang.RuntimeException: Resource not found: data/maps/desert.tmx at org.newdawn.slick.util.ResourceLoader.getResourceAsStream(ResourceLoader.java:69) at org.newdawn.slick.tiled.TiledMap.<init>(TiledMap.java:101) at game.Game.init(Game.java:17) at game.Tunneler.initStatesList(Tunneler.java:37) at org.newdawn.slick.state.StateBasedGame.init(StateBasedGame.java:164) at org.newdawn.slick.AppGameContainer.setup(AppGameContainer.java:390) at org.newdawn.slick.AppGameContainer.start(AppGameContainer.java:314) at game.Tunneler.main(Tunneler.java:29) Here is my Game class: package game; import org.newdawn.slick.GameContainer; import org.newdawn.slick.Graphics; import org.newdawn.slick.SlickException; import org.newdawn.slick.state.BasicGameState; import org.newdawn.slick.state.StateBasedGame; import org.newdawn.slick.tiled.TiledMap; public class Game extends BasicGameState{ private int stateID = -1; private TiledMap map = null; public Game(int stateID){ this.stateID = stateID; } public void init(GameContainer container, StateBasedGame game) throws SlickException{ map = new TiledMap("data/maps/desert.tmx","maps");//ERROR } public void render(GameContainer container, StateBasedGame game, Graphics g) throws SlickException{ //map.render(0,0); } public void update(GameContainer container, StateBasedGame game, int delta) throws SlickException{ } public int getID(){return stateID;} } I've tried to see if anyone else has had similar problems but haven't turned up anything. I am able to load other files, so I don't believe it's a compiler issue. My menu class can load images and display them just fine. Also, the filepath is correct. Please let me know if you have any pointers that might help me sort this out.

  Read the article

• How should I structure the implementation of turn-based board game rules?

  - by Setzer22

  I'm trying to create a turn-based strategy game on a tilemap. I'm using design by component so far, but I can't find a nice way to fit components into the part I want to ask. I'm struggling with the "game rules" logic. That is, the code that displays the menu, allows the player to select units, and command them, then tells the unit game objects what to do given the player input. The best way I could thing of handling this was using a big state machine, so everything that could be done in a "turn" is handled by this state machine, and the update code of this state machine does different things depending on the state. However, this approach leads to a large amount of code (anything not model-related) going into a big class. Of course I can subdivide this big class into more classes, but it doesn't feel modular and upgradable enough. I'd like to know of better systems to handle this in order to be able to upgrade the game with new rules without having a monstruous if/else chain (or switch / case, for that matter). Any ideas? What specific design pattern other than MVC should I be using?

  Read the article

< Previous Page | 1 2 3 4 5  | Next Page >