Search Results

Search found 2018 results on 81 pages for 'bayesian networks'.

Page 40/81 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

• Networking Windows 7 and Vista

  - by foosion

  How do you set up a Windows Vista Home Basic desktop (wired) and a Windows 7 Home Premium laptop (wifi) on a home network so that they can share files and the printers connected to the desktop? The Win7 laptop may also be used on other networks. I'm going to have to set this up for my parents when I visit shortly. I currently use XP and am not really familiar with Vista or Win7 network setup. Would it be difficult to share between the Vista and Win7 machines and and XP machine? If not, how to add that?

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

• Pidgin getting "Connection Refused" whenever I connect to IRC server

  - by tvanover

  On my win 7 x64 machine using pidgin 2.6.3 I cannot connect to any IRC server. I have tried most of the North American servers, as well as my workplace's internal server with no luck. I have tried from work as well as from home but different networks have no effect. I keep getting Unable to Connect: Connection refused. It work fine 3 weeks ago on this very machine running Win 7 x64. But then I re-imaged, and did not backup my .purple folder. Which I had used for the past 2 years and originally created on a vista install. I can connect using this install of Pigin to yahoo and msn with no problems. Just not to irc. Any thoughts?

  Read the article

• Can't play stream from TorrentFlux stream

  - by thegreyspot

  Hi I am trying to stream a video from my TorrentFlux-b4rt server. I tried multiple media players, none work. Only VLC was able to produce an error message: input can't be opened: VLC is unable to open the MRL 'mms://...:8080/'. Check the log for details. I have tried multiple computers on different networks and all have the same issue. I am using Windows 7 to play the videos, and the server is Torrentflux-b4rt 1.0-beta2 with ubuntu 9.10. Thank you.

  Read the article

• UDP multicast streaming of media content over WIFI

  - by sajad

  I am using vlc to stream media content over wireless network in scenario like this (from content streamer to stream receiver client): The bandwidth of wireless network is 54 Mb/s and UDP stream's required bandwidth is only 4 Mb/s; however there is trouble in receiving media stream and quality of playing specifically in multicast mode; means I can play the stream but it has jitter and does not play smoothly. In uni-cast I can stream up to 5 media streams correctly, but in multicast mode there is problem with streaming just one media! However when I stream from client some multicast streams; the wifi access-point can receive data correctly and I can see the video in "udp streamer" side correctly even when number of multicast streams increases to 9; But as you see I want to stream from streaming server and receive media in client size. Is this a typical problem of streaming real-time contents over wireless networks? Is it necessary to change configurations of my WIFI switch or it is just a software trouble? thank you

  Read the article

• DNS Round-robin failover and load balancing

  - by Tom O'Connor

  Having read all of the questions and answers (1 2 3 and so on) on here relating to DNS load balancing, and Round-robin DNS, there's still a number of unanswered questions.. Large companies, and I'm looking at Google, Facebook and Twitter here, do present multiple A records. 1) If DNS loadbalancing/failover is so dodgy, why do large organisations do it? There seems to be very little mention of "DNS Pinning", despite this (PDF) paper about it. 2) Why is DNS Pinning so seldom mentioned? 3) Are there any concrete examples of which ISPs and so on actually do rewrite DNS TTLs? That said, I'm not entirely backing the side for using DNS for failover or any form of load balancing. For most networks, BGP diverse routing still seems to be a better fit. DNS rears it's ugly head again. :(

  Read the article

• Windows 7 Default Gateway problem

  - by Matt

  Hi, I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

  Read the article

• How can I set up multiple dynamic users to update a single network's dynamic IP

  - by d3vid

  On my home network we are allocated a dynamic IP. I want to configure ddclient (or an equivalent) to send IP updates to DNS-O-Matic/OpenDNS only when I am on my home network. I do not want to send IP updates when I'm on my office network. Can this be done? I am prepared to use different FLOSS software or a different free DNS service. Additionally, there are multiple users who may be on the home network or away on other networks. How can we configure ddclient on each machine so that whoever is on the home network updates the IP (i.e. so we don't have to rely on a particular machine being on the network to update the IP). OpenDNS support have said we can't simply install updater software on each machine.

  Read the article

• Automatically repair network connection when it goes down.

  - by Spines

  Every hour or so my wireless router goes down, and everyone connected loses internet for a couple minutes. If I right click on my network connection and choose repair, I usually get internet back quicker. Is there a way I can automatically have it try to repair the connection once it goes down? Can I write a program to do this if there isn't a built in windows setting? BTW I'm using Windows XP. EDIT:My router is a Linksys WRT110 with Firmware Version: 1.0.04, and I have cable internet. The signal is 100%. I live in an apartment complex and there are about 15 other wifi networks visible to me, not sure if that has any effect.

  Read the article

• IE Kerberos failure on some machines with CNAME web server (with SPN for host's A record)

  - by Eric Thames

  It's fairly well known that IE doesn't like to do Kerberos against hosts that are registered in DNS as CNAMEs. What happens is that IE turns around and uses the underlying A record for the host for looking up the Service Principal Name (SPN). On a test network we are able to get Kerberos working by having the SPN registered for the A record of the host, so that Kerberos authentication happens successfully when accessing the web server via it's CNAME in the browser. Kerberos authentication works properly when directly accessing the web server with the A record host in the URL, but for various reasons that are beyond my control, it is desired to use the CNAME. On the production network, this same configuration fails though and I can't figure out why. Any thoughts? This is a java web application using the SPNEGO library - not IIS. Kerberos authentication is working properly in both the test and production networks (and has been confirmed to not fail back to NTLM), but the CNAME access only works in test.

  Read the article

• TP-Link TL-WA701N not working good as wireless extender

  - by djechelon

  I bought the device in subject to extend the range of my WPA2/PSK-protected wifi network powered by a TP-Link TL-WR340G device (AP+router). I configured it as follows: Operation mode: Universal Repeater MAC of AP: scanned my SSID and got it Channel width: 20MHz Security options: the same as the parent AP (WPA2/PSK with AES encryption) After configuration inSSIDer shows me two APs beaconing the same SSID at different SNRs (because I was with my laptop close to the extender). After a few hours my tablet, far from the parent AP, stopped working. I found that the scan reported two networks with the same SSID: one WPA-protected and one free at all. This happened very frequently. Rebooting the extender by unplugging it worked but this doesn't last long. Sometimes the extender stops transmitting at all, sometimes it beacons an open network to which nobody can connect (because there is no DHCP). What's wrong with my configuration?

  Read the article

• port forwarding on windows server 2008 to Hyper-v machines

  - by This is it

  I have a host machine (win server 2008 R2) with several Hyper-V virtual machines. I want to be able to redirect certain ports of host to virtual machines. There is virtual network connection between host and virtual machines (192.168.10.xxx). Host is also attached to external network (10.10.10.123). Virtual machines have several other networks between them. E.g., I want to be able to redirect traffic from 10.10.10.123 12345 to 192.168.10.321 54321 I tried RRAS in windows server but for it to work Default gateway to 10.10.10.123 has to be set in virtual machines. Virtual machines can not be on external network.

  Read the article

• Multiple home routers

  - by netvope

  Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

  Read the article

• Multiple home routers

  - by netvope

  Suppose I have the following configuration: Router A: WAN port connected to the Internet, LAN = 192.168.1.0/24 Computer A: Connected to router A as 192.168.1.101 Router B: WAN port connected to router A as 192.168.1.102, LAN = 192.168.2.0/24 Computer B: Connected to router B as 192.168.2.101 Now I want computer A to communicate with computer B seamlessly (e.g. can establish a TCP connection by running nc 192.168.2.101 <port>) by means of routing, rather than merging the two networks into one (which can be easily accomplished using router B as a switch). Most routers are shipped with NAT turned on, of which I definitely need to turn off in router B. But what other steps do I need to take so that packets from computer A to computer B would go through router B? I could manually add a routing table entry in computer A so that all packets targeted to 192.168.2.0/24 go through gateway 192.168.1.102, but I would prefer an automatic way if it exist.

  Read the article

• How to set up a software VPN when moving a server to the cloud

  - by Neal L

  I work in a small company with one office in Dallas and another in Los Angeles. We run a Fedora server at our Dallas location and use a Linksys RV042 at each location to create a VPN connection between the sites. Every time the power or internet goes out in Dallas, our server is inaccessible so the entire company goes down. Because of this, we would like to use a shared server in the cloud (something like Linode) to avoid this problem. As a relative novice to VPN configurations, I would like to know if it is possible to set up a software VPN on the cloud server and connect our local networks in Dallas and LA to that VPN. I've read about openvpn and ssh vpns, but I don't know it is the best option. Could anyone with some experience point me in the right direction on the right combination of software VPN and hardware for this? We're open to new hardware to make this happen. Thanks!

  Read the article

• Juniper Network Connect (VPN) on Windows 7

  - by Virat Kadaru

  My company uses Juniper networks for vpn access. I am unable to get the juniper network connect client to work on windows 7 64-bit. It used to work before but after I formatted my system it gives the following error every time I start the vpn client If I check the logs I see this error The Juniper Network Connect Service service is marked as an interactive service. However, the system is configured to not allow interactive services. This service may not function properly. Thanks in advance.

  Read the article

• Need help creating advanced context menu command in Windows 7 (x64)

  - by Craig

  I found out about ForceBindIP and I really love it, so much that I am using it regularly enough to where spamming the same command prompt over and over again is getting painful. Here's ForceBindIP and what it does: http://www.r1ch.net/stuff/forcebindip/ I'm on a 64-bit of Windows 7 Home Premium. What I want to do is add a right-click context menu item so that when I browse items in Windows Explorer, or on my desktop, I can automate a ForceBindIP command (through the prompt). I am permanently connected to two networks: one over ethernet, and one over wireless. My ethernet network takes priority. What I want to do is add a "Run through wireless network" context menu item, that will send the item through this command: ForceBindIP {5F657824-9E3B-46E5-C21E-F52585R6457E} "[path to right-clicked file here]" It will need to run that command in C:\Windows\SysWOW64. I've no experience at all playing with the Windows registry or writing batch files, anything of that sort. I was wondering if anyone here would be kind enough to assist me?

  Read the article

• Connecting together DIR-615 and DIR-655

  - by ra170

  On my DIR-655 my internal network is: 192.168.0.x On my DIR-615 my internal network is: 192.168.1.x They are both connected to my firewall PIX 501 box The PIX itself is connected to the comcast modem. I briefly looked at the menu options on those router and they look similar, however I'm not sure what's the best way to connect those two together so that I can go between those networks. (printing, file browsing, etc.) I'm not sure if I have to do this somehow on those two router or on the PIX itself, or probably on all of them. If anyone has experience with something like that please let me know..

  Read the article

• DrayTek Vigor 2920(n): VPN with VLAN restrictions?

  - by Dirk

  Hi, I'm currently installing a DrayTek Vigor 2920n router in a new office. This router is to be used for 2 seperate companies. For one of these companies, the router has a LAN-2-LAN (VPN) connection to a datacenter configured. The other company should not be able to access this other (VPN-)network. I'm aware of the capability of this router to have VLAN's, but I cannot figure out how to configure the VPN-connection to only be accessible for VLAN0 and not for VLAN1. I know I can also add another router to physically split both networks, but we bought the DrayTek with the idea that it could easily have the VPN-connection available for VLAN0 and not for VLAN1. VLAN1 can easily be in another subnet, that's fine, although, I don't know how to configure that on this DrayTek. Can anyone point me in the right direction? Thanks in advance, Dirk

  Read the article

• TCP/IP- what is it exactly?

  - by OckhamsRazor

  I know that this question sounds stupid, but over all these years, I still have difficulty explaining TCP/IP to people. I don't completely get it myself, and even after reading up on it, the distinction is not very clear. What I get so far is that IP deals with networks while TCP involves delivery of messages over that network. I'm not totally convinced though. Also, they reside on different layers of the Internet architecture. Could anyone disambiguate this distinction using a simple analogy or examples? Also, I read this somewhere The difference is that TCP is responsible for the data delivery of a packet and IP is responsible for the logical addressing. In other words, IP obtains the address and TCP guarantees delivery of data to that address. Is this correct? Thanks for helping me out. One last thing- Where does the ethernet come in all of this?

  Read the article

• Route packets from one VPN to another

  - by Mike

  I have two OpenVPN servers (10.8.0.0 and 10.9.0.0) set up on my OpenSUSE server. Within one network, each computer is visible to any other one, but I'd like to make it so that computers are visible across networks. I'd like to route the packets like this: when a user (say 10.8.0.6) pings an address on the other VPN (10.9.0.6), the packets are routed to the 10.9.0.1 and then to the appropriate computer in this VPN. How do I achieve this using iptables or a different tool? I tried the commands at the end of this section with no avail.

  Read the article

• MS Word - Keeps requesting user to save Normal template

  - by MikeT505

  We have Small Business Server 2008 setup on a couple of our clients networks and we have the following issue. Whenever they logon, Microsoft word automatically opens and requests them to save their changes to the template 'Normal'. It constantly happens, we have a mixture of Win 2000 and XP machines and it seems to happen more often on XP than 2000. Any idea why this might be happening and how we can resolve it, it's just frustrating for the end users. PS: This is happening on Office 2000 and Office 2003.

  Read the article

• Best MTA setup for home or laptop computers - not server

  - by thomasrutter

  Hello, What is a good MTA (e.g. Postfix or something else) setup for a home computer behind a NAT, or a laptop that connects to various different wifi networks? I've read a lot of Postfix tutorials on how to set it up this way or that, but they are usually geared towards computers that are servers ie they have a static IP have a domain name are always connected to the same network My requirements are, I guess: Ability to forward mail for "root" to another server of my choosing. No listening for incoming SMTP connections - outgoing only Ability to route outgoing mail via an external SMTP server with authentication (and perhaps encryption) If not Postfix, I need an MTA which can queue up mails in case it temporarily has no internet connection.

  Read the article

• Not able to connect to a mac client from a windows machine

  - by Manish

  I have a Server.exe file which I use to connect to a mac.(I am fairly confident that server.exe is not buggy ).When i try to do this I get this often cited error "No connection could be made because the target machine actively refused it " I did search some existing questions about this on the forum and it looked like this might be a firewall issue.FWIW I dont have any firewall set on my mac (client) and on my server machine (Windows 7 64 bit ) under the firewall settings I have :- Incoming connections : Block all connections to programs that are not on the list of allowed programs. Active Domain Networks: Same domain as the one which my client is on. Windows Firewire State: Off. Do you think i need to change something here?Can someone help me with next steps?

  Read the article

• Development Server Blocked Only from Home

  - by theonlylos

  Recently I've been having an issue with my CentOS 6 test server running Apache and Webmin running on port 10000 where when I try accessing any part of the server - SSH/FTP and even my domains (I have two - both keep getting timeout errors) when I try accessing from any computer on my home network. However when I access via tethering or via my office networks everything loads fine. While the firewall is the first issue at mind, my router never was set to block any special ports, and even after adding port 10000 as a specific exception I'm having no luck. Also, I doubt this is an IP blacklisting issue because I have websites on other servers using CloudFlare for security and I haven't gotten any warnings. Any assistance is greatly apprecaiated. UPDATE: Just some extra details about the issue: My ISP to my knowledge only blocks off ports 25 and 80 for residential users to prevent them from running web servers - however this issue has only come up a day or two ago, before that I was using the server successfully for months. Also the server is not physically located in any of my workspaces - it's a VPS housed in a datacenter

  Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >