Search Results

Search found 4504 results on 181 pages for 'cut paste'.

Page 40/181 | < Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >

  • Passing two arguments to a command using pipes

    - by firebat
    Usually, we only need to pass one argument: echo abc | cat echo abc | cat some_file - echo abc | cat - some_file Is there a way to pass two arguments? Something like {echo abc , echo xyz} | cat cat `echo abc` `echo xyz` I could just store both results in a file first echo abc > file1 echo xyz > file2 cat file1 file2 But then I might accidentally overwrite a file, which is not ok. This is going into a non-interactive script. Basically, I need a way to pass the results of two arbitrary commands to cat without writing to a file. UPDATE: Sorry, the example masks the problem. While { echo abc ; echo xyz ; } | cat does seem to work, the output is due to the echos, not the cat. A better example would be { cut -f2 -d, file1; cut -f1 -d, file2; } | paste -d, which does not work as expected. With file1: a,b c,d file2: 1,2 3,4 Expected output is: b,1 d,3 RESOLVED: Use process substitution: cat <(command1) <(command2) Alternatively, make named pipes using mkfifo: mkfifo temp1 mkfifo temp2 command1 > temp1 & command2 > temp2 & cat temp1 temp2 Less elegant and more verbose, but works fine, as long as you make sure temp1 and temp2 don't exist before hand.

    Read the article

  • Hardware issue: computer plays beep sounds at startup, and then turns off

    - by Darkkurama
    Turns out that after moving, my computer got damaged somehow. I installed my computer 2 days ago. I didn't check the state of the hardware parts and turned the pc on recklessly, not realizing that the cpu fan was dettached from the cpu. After this I reattached the fan. The computer worked kind of faulty after that, because at the time of startup, it would play a long beep (different from the normal beep) and won't display anything. I tried restarting after this incident and it got fixed (don't know how, but it did), and I was even able to play some videogames for some hours (more than 5). This morning I tried to get this issue sorted out by checking again the cpu and in general, the connections, and for my surprise, at the time of turning it on again, the computer wouldn't boot at all. I reapplied some thermal paste to the cpu and fan, but got no results (I did this because the old paste was very badly distributted along the surface of both cpu and fan). Now every time I turn it on, the computer acts randomly: sometimes at startup, it plays a long continous beep and then turns off. one time it played a long continous beep and got to the windows password input screen, but then it turned off More frequently, I turn it on and after some seconds, it turns off without any sound. You can check this video I recorded, which features how the computer behaves most of the time Another one I tried troubleshoting it myself by disconnecting my graphic card, rams, HDD and even the cpu and its fan with no result. Computer specs: Intel Core 2 Quad Q6600 processor, Nvidia xfx gtx 260 black edition, 4 GB ram, 500 GB hard drive, Windows 7 64 bit

    Read the article

  • Is UPS worthwhile for home equipment?

    - by Jon Skeet
    Over the years, I've had to throw away a quite a few bits of computing equipment (and the like): Several ADSL routers with odd symptoms (losing wireless connections, losing wired connections, DHCP failures, DNS symptoms etc) Two PVRs spontaneously rebooting and corrupting themselves (despite the best efforts of the community to diagnose and help) One external hard disk still claiming to function, but corrupting data One hard disk as part of a NAS raid array "going bad" (as far as the NAS was concerned) (This is in addition to various laptops and printers dying in ways unrelated to this question.) Obviously it'll be impossible to tell for sure from such a small amount of information, but might these be related to power issues? I don't currently have a UPS for any of this equipment. Everything on surge-protected gang sockets, but there's nothing to smooth a power cut. Is home UPS really viable and useful? I know there are some reasonably cheap UPSes on the market, but I don't know how useful they really are. I'm not interested in keeping my home network actually running during a power cut, but I'd like it to power down a bit more gracefully if the current situation is putting my hardware in jeopardy.

    Read the article

  • Iptables QUEUE Target and Snort

    - by bradlis7
    I'm trying to set up a firewall with support for snort, and it is dropping all of my packets when I add the QUEUE target. I've made it like this, but the QUEUE target is not allowing the packets to be processed any further: -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -j QUEUE -A INPUT -j ACCEPT # It's not allowing anything past QUEUE, as you can see below in the count. > iptables -I INPUT -nv pkts bytes target prot opt in out source destination 6707 395K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 933 138K QUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 I'm eventually going to change it to forward, but I'm just trying to get it working for now. I start snort like so: snort -Q -D -c /etc/snort/snort.conf EDIT: More Information When I run it, it still sees the packets without having an iptables QUEUE target rule, but when I add a QUEUE target, it starts losing all of my packets. # snort -Qc /etc/snort/snort.conf -N -A console Enabling inline operation Running in IDS mode --== Initializing Snort ==-- Initializing Output Plugins! Initializing Preprocessors! Initializing Plug-ins! Parsing Rules file "/etc/snort/snort.conf" ## === CUT === *** *** interface device lookup found: bond0 *** Initializing Network Interface bond0 Decoding Ethernet on interface bond0 ## === CUT === Not Using PCAP_FRAMES So, it says inline, but the it says it's using bond0. Inline should not require an interface, right?

    Read the article

  • Save and restore multiple layers within a Photoshop action that flattens

    - by SuitCase
    I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

    Read the article

  • Finding matching columns in excel

    - by fakaff
    I've never used excel before so I need the simplest solution available, and this is a work assignment due this week so I didn't have time read much of the documentation. Basically, I have two tables, A and B, and they are both thousands of rows long. Description of my task: right now (since I don't know better) I'm manually doing this: Go to row i in table B. Select entries in columns B(a, b, c) of that same row. Look for a row in table A where column A(b) matches row B(a). Paste the entries of columns B(a) of row i at the end of the row found in the last step. Repeat for row i + 1. Example: row B(cat, dog, mouse) matches A(mammal, cat, Mr. Whiskers). So I would paste B after A and have A(mammal, cat, Mr. Whiskers, cat, dog, mouse). Note: I am not joining tables. I am merely extending table A by pasting row A(b) if row A(b) matches row B(a). Also, sometimes entries are spelled slightly differently. Using wildcards to search for candidates would be of help. As the description should let on, this task is very tedious and inefficient if I don't know how to automate some operations (there are thousands of entries). Any quick tips as to how to be more productive is a big help.

    Read the article

  • Can not copy files after installing windows

    - by Ali
    I am experiencing a weird problem. I was running Xubuntu on my laptop until yesterday that I had to delete Xubuntu and install Windows. I had a NTFS partition on my Xubuntu that I kept some files on it. Today after installing windows I wanted to move all the files from that partition to an external HDD. I selected all files and folders and clicked on Copy, then I went to the HDD and clicked on paste but nothing happened. I can not do that. I do not know why. I copy the files, and wherever I click paste, nothing happens. If I try to copy the files and folders one by one, I can copy some of them, but some of them do not move. The other problem I have is that I can not open some files, in particular pdf files. When I click on pdf files I get this error: There was an error opening this document. This file cannot be found. Also, I cannot play some mp4 files. I can not open some jpg and txt files. I get this error The directory name is invalid. So in summary, after removing Xubuntu and installing windows 7 I have the following problems with one of the NTFS partitions on my internal drive: Can not copy or cut all folders and files from that partition to any other partition - I also do not get any errors. Can copy some folders and files Can not access some pdf, jpeg, txt and mp4 files and get the above errors. I should also mention I did not change anything for this partition during the installation or formatting the other partitions.

    Read the article

  • Privacy, VPN and routers

    - by user123189
    Ever since this ACTA push-up the things are starting to heat up around torrents and privacy. I am using Tribler now, but this is not secure enough for me. Not enough privacy. I've been using in the past a swedish VPN PPTP connection. What I observed is that, when the VPN connection was down, Internet traffic wasn't cut off, rather the downloads were continuing, this time with my real IP, wearing off my protection. 1st : How to enforce a VPN connection that will cut all traffic when down? That is, the moment the connection is down, all internet traffic should cease as if I'd pull the network plug out. 2nd: Is PPTP good enough or should I ask for SSTP or IKEV2 ? 3rd: Should I disable IPv6 ? Is VPN no longer private if I keep IPv6 active? I 'heard some stuff' about dual vpn routers to be able to improve privacy; but nothing more about how to configure one for such a task. 4th: Is there any kind of "black box" hardware equipment that can be used in hiding IP, encrypting traffic and so on ?

    Read the article

  • How could I embed formatted XML source in WORD documents?

    - by eckes
    I'm writing a documentation with WORD that contains XML source code (whole files) as examples. The way I'm embedding the currently XML is quite cumbersome and doesn't seem to me as really maintainable: I'm finishing the editing of the document in WORD and create a PDF from it using Acrobat next, I open my XML files (2x input files, 2x generated output files) with IE and print them with the PDF printer supplied by Acrobat now, I open up Acrobat Pro and attach the four XML-PDF files to my original document The problem with that work flow for me is that it involves too much manual labor in order to get the documentation done. What I've tried up to now is not really satisfying for me: converting each XML to PDF and appending them like described above opening the XML files with SCiTE, copy as RTF and paste into Word playing around with the LaTeX packages minted, pygments and listings (I could write the docs with LaTeX too) but found some unsolvable problems in each of these packages I'm searching for a way that produces my documentation more automatic. For example embedding the XML files including formatting of IE (which I find quite readable). The files should be included by reference so that I don't have to paste the XML sources manually every time the XML changes.

    Read the article

  • Proper approach to debug PC startup problems (POST)

    - by saurabhj
    My CPU was heating up to around 65 deg C and last time this had happened (about a year ago), I got thermal paste put between the CPU and heat sink and this managed to get it down to about 45 - 50 degrees. This time, I got some thermal paste and put it myself. However, my PC is not showing the POST display and not starting up. This is what happens LEDs light up HDDs spin Mouse is getting power All fans including the processor fan starts No display on monitor No diagnostic beep sounds (no sounds at all) What I have tried Removing everything including RAM, HDD, PCI cards, AGP card Boot up machine No changes from first state. What steps can I take to figure out where the problem lies? Note (might be important) When I removed the heat sink, the processor came out with it (it was stuck to it inspite of the processor latch on) Had to pry it separate with a screw-driver. Configuration Pentium 4, 2.8 Ghz with HT (very old, I know) Original Intel Mobo with onboard sound and graphics (GB series) 2x512 Mb DDR-RAM 2 SATA disks (320 Gigs / 250 gigs) DVD Writer Creative Sound Card Network card Any help would be appreciated. Thanks!

    Read the article

  • Shortcut To Full Screen App In Lion

    - by omghai2u
    I postponed getting OSX Lion for as long as I possibly could. Now that I have it, I'm having lots of difficulties getting it to perform how I want. On Snow Leopard my typical setup for working was 4 spaces. I'd keep a Windows VM open on Space #4 full-screened, a Linux open on space #3, and I'd do other stuff on spaces #1 and #2. My keyboard shortcut allowed me to switch between my Windows work (Command + 4) to my Linux work (Command + 3) very quickly, and without the need for my hands to leave the keyboard (or effectively to even quit typing). Productivity was good. I see that on Lion a full-screened VM (and yes, they need to be full screened, Fusion's Unity won't cut it for what I need to do) is its own separate Desktop. I have set up 4 desktops and made my keyboard shortcuts to move between them Command + # just as before. But how do I get my full-screened VM to be one of those already existing desktops? Or, rather, how do I make a short-cut for the full-screened app?

    Read the article

  • Save and restore multiple layers within a Photoshop action that flattens

    - by SuitCase
    I'm editing comic pages with layers - "background", "foreground", "lineart" and "over lineart". I have a Photoshop action that includes a Mode-Bitmap command, which requires the image to be flattened. I need this part of the action because I use the Halftone Screen method of reducing the greyscale image to bitmap on the "background" layer, creating a certain effect. I am pretty sure there is no filter or anything else that gives the same effect. After the mode is changed to bitmap, my action changes things back to greyscale for further changes. This poses a problem. I only want to do the bitmap mode change on the background layer, and after I do the change I want to restore the layer structure as it was - with the foreground, lineart and over lineart layers back above the now-halftoned background. My current method of saving these layers and restoring them is clumsy. My action is able to automatically save the "foreground" layer by selecting it, cutting it, then pasting it back in after the mode changing is over. But, for the "ink" and "over ink" layers, I have to manually cut these layers, paste them into a new document, and later re-cut and re-paste after running my action. This is so clunky! What I would like to know is if it's possible to set aside my layers in an automated way, and then bring them back in, also in an automated way. An ugly (but functional) solution would be to replicate my actions of creating new documents and pasting them temporarily there, but I don't think Photoshop allows you to do things outside of your current document with an action. It seems to me that the only way to do what I want is to use the "hack" of incorporating the clipboard into the action as a clever hack, but that leaves me stuck as I have two more layers that can't fit onto that same clipboard. Help or suggestions would be appreciated. I can keep on doing it manually, but to have a comprehensive action would save me a ton of time.

    Read the article

  • How can I read PDFs with e-reader on a Lenovo tablet?

    - by Jack M
    This is my first time using a tablet and I'm totally lost - this must be what computers look like to old people. This is a Lenovo Thinkpad tablet. I don't see a specific model number on it (it was passed down to me second hand). What I'd like to do is read a PDF. I'm fairly certain I successfully transferred the PDF onto the tablet via an SD card, and I noticed this thing has an app called "eReader" on it, so I started that up. All I see are empty bookshelves, and no obvious buttons or settings anywhere. I saw in multiple places that you have to, as one site puts it: ...copy and paste the relevant files into the eBooks folder and they will appear on the eReader shelf for your consumption... But I have no idea how to: Access the file system. Locate the eBooks folder. Copy and paste files. Will I need a file explorer app? If so, how can I install that given that my only method of getting data onto this tablet is an SD card (no wireless internet).

    Read the article

  • Strange Behaviour with Unicode Characters in Windows

    - by open_sourse
    Ok, I do not know if this is a programming question, but it certainly is a technical one so I am asking it here. I was working on some internationalization stuff in my PHP code, and in order to ensure that my generated HTML shows up Unicode correctly based on the encoding and stuff I decided to add some Chinese text to my PHP page, which then echoes it into the browser to complete my test case. So I went into google and typed "Chinese", copied the first Chinese text that the search returned (which was ??/??). I then copied it into Notepad++ which is my editor, and to my surprise showed up as boxes similar to [][]/[][]. So I thought the encoding in Notepad++ was messed up and I changed the encoding to UTF-8 and UCS, neither worked. I did it fresh in a newly encoded file, still I got the boxes. The same content when I paste into Google and StackOverFlow (like I did in this posting) shows up correct Chinese! I even opened up Windows Clipboard Viewer and the content is represented in the Clipboard as boxes! I tried pasting it into Windows Explorer address bar and using to rename a file to, but I still get boxes. But it shows up correctly when pasted into my Chrome Browser address bar! Is this a Windows issue? Since I am able to paste it correctly in SO, the data in memory should be encoded correctly right? But if that is the case why does it show up as boxes in the Clipboard Viewer? I am confused here...By the way I am using Windows XP with SP3. (I am asking this question here, even if it is not programmatic, because it is preventing me from running my programming test cases..)

    Read the article

  • Strange Domain name under the same IP Address

    - by Mike Chip
    There's something really weird happening in my server. But first things first: I wanted to have my website and chose the domain name "myowndomain.com", Now on my domain registrar I point "myowndomain.com" to the address of my recently setup VPS, let's say 50.50.50.50 So I installed everything I needed to run my website, and I started to notice strange queries coming from different IP Addresses. Like these [client 123.123.123.123] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php [client 456.456.456.456] File does not exist: /var/www/html/api, referer: http://www.strangedomain.com/api/manyou/my.php or like this (Really a long line, I cut some things) GET /?s=vod-show-id-22-area-%E5%85%B6%E4%BB%96-language-%E9%9F%A9%E8%AF%AD.html HTTP/1.1" 301 295 "http://v.strangedomain.com/?s=vod-s ...[cut]... spider" That above is happening the most. The 'strangedomain.com' returns the same IP address of my VPS which my website is hosted on. The whois of such domain shows it's registered to a chinese. But the street name didn't look so right (like a huge single word), so I think all of that info might be fake, but still might be a chinese. I also noticed that all 'clients' trying to access the 'strangedomain.com' is coming from china. If I type in the browser 'strangedomain.com', I see my website. I'm worried, because my website is actually an e-commerce. I don't know if 'strangedomain.com' WAS a website on 50.50.50.50 in the not so far past, or if it's something else.

    Read the article

  • Does anyone know the touchpad disabling driver for Dell xps 14?

    - by rkar
    I accidentally deleted my Dell xps 14 touch pad disabling driver and I don't know where to find it and reinstall it. I have already tried Dell support and without luck (I don't want to install something that I don't know). Would anyone please send me the link to that driver To clarify: There is this Fn shortcut key used to disable/enable touch pad in Dell xps14 and when press it orange light on touch pad will lit and touch pad will stop working. But after deleting the driver that responsible for that function,it stopped working. My service center is almost 600 miles away and he said that he forgot to add it last time he fix my laptop. Since the internet connection at his place is slow,he can't send me from mail either.So can anyone send me the link for that driver. Since I don't really know about drivers it would be really nice if some one show me the driver name or link. Sorry,here is my laptop service tag "C37KWL1".I don't know how to find the specific driver for that function key.My dell has a short cut for disabling touchpad with picture on it along with the other multimedia short cut key with picture. since xps 15 and 17 have seperated touch key instead of on function keys mine have to choose function key or multimedia key through setting.To be honest my service center tech guy forgot to install it when he repair it and can't send me the file(which is about over 20mb or something according to him)for some reason.All i need is that particular file.

    Read the article

  • NOTEPAD++ Need macro or typeitin for automation of large lists

    - by user2526699
    I'm sure there is a way to do this but I can not seem to figure it out. I will try my best to explain this. I have a list with 20,000 lines in notepad++. I have two tabs open in notepad++. The right side tab is the main list. The left side tab is what needs to be added to the beginning of each line in the right tab. Here is an image of my notepad++ to give you a better understanding. I need to be able to do the following in an automated way as I have over 20,000 lines to do this way. copy line 1 of tab 'new 7' switch to tab 'new 6' paste clipboard(line 1 of tab 'new 7') at beginning of line 1 tab 'new 6' switch back to tab 'new 7' copy line 2 of tab 'new 7' switch to tab 'new 6' paste clipboard(line 2 of tab 'new 7') at beginning of line 2 tab 'new 6' I have both pasteitin and typeitin download but if i need some other program/app or if it's built in to notepad++ that would be great. I need to do this by the program itself or for me to only have to press a button to do each of these.

    Read the article

  • MySQL port 3306 blocked in csf yet can still telnet to port 3306 from external host

    - by Neek
    We have a Centos 6 VPS that was recently migrated to a new machine within the same web hosting company. It's running WHM/cPanel and has csf/lfd installed. csf is set up with mostly vanilla config. I'm no iptables expert, csf has not let me down before. If a port isn't in the TCP_IN list, it should be blocked on the firewall by iptables. My problem is that I can telnet to port 3306 from an external host, yet I think iptables ought to be blocking 3306 because of csf's rules. We are now failing a security check because of this open port. (this output is obfuscated to protect the innocent: www.ourhost.com is the host with the firewall problem) [root@nickfenwick log]# telnet www.ourhost.com 3306 Trying 158.255.45.107... Connected to www.ourhost.com. Escape character is '^]'. HHost 'nickfenwick.com' is not allowed to connect to this MySQL serverConnection closed by foreign host. So the connection is established, and MySQL refuses the connection due to its configuration. I need the network connection to be refused at the firewall level, before it reaches MySQL. Using WHM's csf web UI I can see 'Firewall Configuration' includes a fairly sensible TCP_IN line: TCP_IN: 20,21,22,25,53,80,110,143,222,443,465,587,993,995,2077,2078,2082,2083,2086,2087,2095,2096,8080 (lets ignore that I could trim that a little for now, my concern is that 3306 is not listed in that list) When csf is restarted it logs the usual slew of output as it sets up iptables rules, for example what looks like it blocking all traffic and then allowing specific ports like SSH on 22: [cut] DROP all opt -- in * out * 0.0.0.0/0 -> 0.0.0.0/0 [cut] ACCEPT tcp opt -- in !lo out * 0.0.0.0/0 -> 0.0.0.0/0 state NEW tcp dpt:22 [cut] I can see that iptables is running, service iptables status returns a long list of firewall rules. Here is my Chain INPUT section from service iptables status, hopefully that's enough to show how the firewall is configured. Table: filter Chain INPUT (policy DROP) num target prot opt source destination 1 acctboth all -- 0.0.0.0/0 0.0.0.0/0 2 ACCEPT tcp -- 217.112.88.10 0.0.0.0/0 tcp dpt:53 3 ACCEPT udp -- 217.112.88.10 0.0.0.0/0 udp dpt:53 4 ACCEPT tcp -- 217.112.88.10 0.0.0.0/0 tcp spt:53 5 ACCEPT udp -- 217.112.88.10 0.0.0.0/0 udp spt:53 6 ACCEPT tcp -- 8.8.4.4 0.0.0.0/0 tcp dpt:53 7 ACCEPT udp -- 8.8.4.4 0.0.0.0/0 udp dpt:53 8 ACCEPT tcp -- 8.8.4.4 0.0.0.0/0 tcp spt:53 9 ACCEPT udp -- 8.8.4.4 0.0.0.0/0 udp spt:53 10 ACCEPT tcp -- 8.8.8.8 0.0.0.0/0 tcp dpt:53 11 ACCEPT udp -- 8.8.8.8 0.0.0.0/0 udp dpt:53 12 ACCEPT tcp -- 8.8.8.8 0.0.0.0/0 tcp spt:53 13 ACCEPT udp -- 8.8.8.8 0.0.0.0/0 udp spt:53 14 LOCALINPUT all -- 0.0.0.0/0 0.0.0.0/0 15 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 16 INVALID tcp -- 0.0.0.0/0 0.0.0.0/0 17 ACCEPT all -- 0.0.0.0/0 0.0.0.0/0 state RELATED,ESTABLISHED 18 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:20 19 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:21 20 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:22 21 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:25 22 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:53 23 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:80 24 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:110 25 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:143 26 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:222 27 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:443 28 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:465 29 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:587 30 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:993 31 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:995 32 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2077 33 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2078 34 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2082 35 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2083 36 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2086 37 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2087 38 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2095 39 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:2096 40 ACCEPT tcp -- 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:8080 41 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:20 42 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:21 43 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:53 44 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:222 45 ACCEPT udp -- 0.0.0.0/0 0.0.0.0/0 state NEW udp dpt:8080 46 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 8 47 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 0 48 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 11 49 ACCEPT icmp -- 0.0.0.0/0 0.0.0.0/0 icmp type 3 50 LOGDROPIN all -- 0.0.0.0/0 0.0.0.0/0 What's the next thing to check?

    Read the article

  • Run Windows in Ubuntu with VMware Player

    - by Matthew Guay
    Are you an enthusiast who loves their Ubuntu Linux experience but still needs to use Windows programs?  Here’s how you can get the full Windows experience on Ubuntu with the free VMware Player. Linux has become increasingly consumer friendly, but still, the wide majority of commercial software is only available for Windows and Macs.  Dual-booting between Windows and Linux has been a popular option for years, but this is a frustrating solution since you have to reboot into the other operating system each time you want to run a specific application.  With virtualization, you’ll never have to make this tradeoff.  VMware Player makes it quick and easy to install any edition of Windows in a virtual machine.  With VMware’s great integration tools, you can copy and paste between your Linux and Windows programs and even run native Windows applications side-by-side with Linux ones. Getting Started Download the latest version of VMware Player for Linux, and select either the 32-bit or 64-bit version, depending on your system.  VMware Player is a free download, but requires registration.  Sign in with your VMware account, or create a new one if you don’t already have one. VMware Player is fairly easy to install on Linux, but you will need to start out the installation from the terminal.  First, enter the following to make sure the installer is marked as executable, substituting version/build_number for the version number on the end of the file you downloaded. chmod +x ./VMware-Player-version/build_number.bundle Then, enter the following to start the install, again substituting your version number: gksudo bash ./VMware-Player-version/build_number.bundle You may have to enter your administrator password to start the installation, and then the VMware Player graphical installer will open.  Choose whether you want to check for product updates and submit usage data to VMware, and then proceed with the install as normal. VMware Player installed in only a few minutes in our tests, and was immediately ready to run, no reboot required.  You can now launch it from your Ubuntu menu: click Applications \ System Tools \ VMware Player. You’ll need to accept the license agreement the first time you run it. Welcome to VMware Player!  Now you can create new virtual machines and run pre-built ones on your Ubuntu desktop. Install Windows in VMware Player on Ubuntu Now that you’ve got VMware setup, it’s time to put it to work.  Click the Create a New Virtual Machine as above to start making a Windows virtual machine. In the dialog that opens, select your installer disk or ISO image file that you want to install Windows from.  In this example, we’re select a Windows 7 ISO.  VMware will automatically detect the operating system on the disk or image.  Click Next to continue. Enter your Windows product key, select the edition of Windows to install, and enter your name and password. You can leave the product key field blank and enter it later.  VMware will ask if you want to continue without a product key, so just click Yes to continue. Now enter a name for your virtual machine and select where you want to save it.  Note: This will take up at least 15Gb of space on your hard drive during the install, so make sure to save it on a drive with sufficient storage space. You can choose how large you want your virtual hard drive to be; the default is 40Gb, but you can choose a different size if you wish.  The entire amount will not be used up on your hard drive initially, but the virtual drive will increase in size up to your maximum as you add files.  Additionally, you can choose if you want the virtual disk stored as a single file or as multiple files.  You will see the best performance by keeping the virtual disk as one file, but the virtual machine will be more portable if it is broken into smaller files, so choose the option that will work best for your needs. Finally, review your settings, and if everything looks good, click Finish to create the virtual machine. VMware will take over now, and install Windows without any further input using its Easy Install.  This is one of VMware’s best features, and is the main reason we find it the easiest desktop virtualization solution to use.   Installing VMware Tools VMware Player doesn’t include the VMware Tools by default; instead, it automatically downloads them for the operating system you’re installing.  Once you’ve downloaded them, it will use those tools anytime you install that OS.  If this is your first Windows virtual machine to install, you may be prompted to download and install them while Windows is installing.  Click Download and Install so your Easy Install will finish successfully. VMware will then download and install the tools.  You may need to enter your administrative password to complete the install. Other than this, you can leave your Windows install unattended; VMware will get everything installed and running on its own. Our test setup took about 30 minutes, and when it was done we were greeted with the Windows desktop ready to use, complete with drivers and the VMware tools.  The only thing missing was the Aero glass feature.  VMware Player is supposed to support the Aero glass effects in virtual machines, and although this works every time when we use VMware Player on Windows, we could not get it to work in Linux.  Other than that, Windows is fully ready to use.  You can copy and paste text, images, or files between Ubuntu and Windows, or simply drag-and-drop files between the two. Unity Mode Using Windows in a window is awkward, and makes your Windows programs feel out of place and hard to use.  This is where Unity mode comes in.  Click Virtual Machine in VMware’s menu, and select Enter Unity. Your Windows desktop will now disappear, and you’ll see a new Windows menu underneath your Ubuntu menu.  This works the same as your Windows Start Menu, and you can open your Windows applications and files directly from it. By default, programs from Windows will have a colored border and a VMware badge in the corner.  You can turn this off from the VMware settings pane.  Click Virtual Machine in VMware’s menu and select Virtual Machine Settings.  Select Unity under the Options tab, and uncheck the Show borders and Show badges boxes if you don’t want them. Unity makes your Windows programs feel at home in Ubuntu.  Here we have Word 2010 and IE8 open beside the Ubuntu Help application.  Notice that the Windows applications show up in the taskbar on the bottom just like the Linux programs.  If you’re using the Compiz graphics effects in Ubuntu, your Windows programs will use them too, including the popular wobbly windows effect. You can switch back to running Windows inside VMware Player’s window by clicking the Exit Unity button in the VMware window. Now, whenever you want to run Windows applications in Linux, you can quickly launch it from VMware Player. Conclusion VMware Player is a great way to run Windows on your Linux computer.  It makes it extremely easy to get Windows installed and running, lets you run your Windows programs seamlessly alongside your Linux ones.  VMware products work great in our experience, and VMware Player on Linux was no exception. If you’re a Windows user and you’d like to run Ubuntu on Windows, check out our article on how to Run Ubuntu in Windows with VMware Player. Link Download VMware Player 3 (Registration required) Download Windows 7 Enterprise 90-day trial Similar Articles Productive Geek Tips Enable Copy and Paste from Ubuntu VMware GuestInstall VMware Tools on Ubuntu Edgy EftRestart the Ubuntu Gnome User Interface QuicklyHow to Add a Program to the Ubuntu Startup List (After Login)How To Run Ubuntu in Windows 7 with VMware Player TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Get a free copy of WinUtilities Pro 2010 World Cup Schedule Boot Snooze – Reboot and then Standby or Hibernate Customize Everything Related to Dates, Times, Currency and Measurement in Windows 7 Google Earth replacement Icon (Icons we like) Build Great Charts in Excel with Chart Advisor

    Read the article

  • Visual Studio 2010 Extension Manager (and the new VS 2010 PowerCommands Extension)

    - by ScottGu
    This is the twenty-third in a series of blog posts I’m doing on the VS 2010 and .NET 4 release. Today’s blog post covers some of the extensibility improvements made in VS 2010 – as well as a cool new "PowerCommands for Visual Studio 2010” extension that Microsoft just released (and which can be downloaded and used for free). [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu] Extensibility in VS 2010 VS 2010 provides a much richer extensibility model than previous releases.  Anyone can build extensions that add, customize, and light-up the Visual Studio 2010 IDE, Code Editors, Project System and associated Designers. VS 2010 Extensions can be created using the new MEF (Managed Extensibility Framework) which is built-into .NET 4.  You can learn more about how to create VS 2010 extensions from this this blog post from the Visual Studio Team Blog. VS 2010 Extension Manager Developers building extensions can distribute them on their own (via their own web-sites or by selling them).  Visual Studio 2010 also now includes a built-in “Extension Manager” within the IDE that makes it much easier for developers to find, download, and enable extensions online.  You can launch the “Extension Manager” by selecting the Tools->Extension Manager menu option: This loads an “Extension Manager” dialog which accesses an “online gallery” at Microsoft, and then populates a list of available extensions that you can optionally download and enable within your copy of Visual Studio: There are already hundreds of cool extensions populated within the online gallery.  You can browse them by category (use the tree-view on the top-left to filter them).  Clicking “download” on any of the extensions will download, install, and enable it. PowerCommands for Visual Studio 2010 This weekend Microsoft released the free PowerCommands for Visual Studio 2010 extension to the online gallery.  You can learn more about it here, and download and install it via the “Extension Manager” above (search for PowerCommands to find it). The PowerCommands download adds dozens of useful commands to Visual Studio 2010.  Below is a screen-shot of just a few of the useful commands that it adds to the Solution Explorer context menus: Below is a list of all the commands included with this weekend’s PowerCommands for Visual Studio 2010 release: Enable/Disable PowerCommands in Options dialog This feature allows you to select which commands to enable in the Visual Studio IDE. Point to the Tools menu, then click Options. Expand the PowerCommands options, then click Commands. Check the commands you would like to enable. Note: All power commands are initially defaulted Enabled. Format document on save / Remove and Sort Usings on save The Format document on save option formats the tabs, spaces, and so on of the document being saved. It is equivalent to pointing to the Edit menu, clicking Advanced, and then clicking Format Document. The Remove and sort usings option removes unused using statements and sorts the remaining using statements in the document being saved. Note: The Remove and sort usings option is only available for C# documents. Format document on save and Remove and sort usings both are initially defaulted OFF. Clear All Panes This command clears all output panes. It can be executed from the button on the toolbar of the Output window. Copy Path This command copies the full path of the currently selected item to the clipboard. It can be executed by right-clicking one of these nodes in the Solution Explorer: The solution node; A project node; Any project item node; Any folder. Email CodeSnippet To email the lines of text you select in the code editor, right-click anywhere in the editor and then click Email CodeSnippet. Insert Guid Attribute This command adds a Guid attribute to a selected class. From the code editor, right-click anywhere within the class definition, then click Insert Guid Attribute. Show All Files This command shows the hidden files in all projects displayed in the Solution Explorer when the solution node is selected. It enhances the Show All Files button, which normally shows only the hidden files in the selected project node. Undo Close This command reopens a closed document , returning the cursor to its last position. To reopen the most recently closed document, point to the Edit menu, then click Undo Close. Alternately, you can use the CtrlShiftZ shortcut. To reopen any other recently closed document, point to the View menu, click Other Windows, and then click Undo Close Window. The Undo Close window appears, typically next to the Output window. Double-click any document in the list to reopen it. Collapse Projects This command collapses a project or projects in the Solution Explorer starting from the root selected node. Collapsing a project can increase the readability of the solution. This command can be executed from three different places: solution, solution folders and project nodes respectively. Copy Class This command copies a selected class entire content to the clipboard, renaming the class. This command is normally followed by a Paste Class command, which renames the class to avoid a compilation error. It can be executed from a single project item or a project item with dependent sub items. Paste Class This command pastes a class entire content from the clipboard, renaming the class to avoid a compilation error. This command is normally preceded by a Copy Class command. It can be executed from a project or folder node. Copy References This command copies a reference or set of references to the clipboard. It can be executed from the references node, a single reference node or set of reference nodes. Paste References This command pastes a reference or set of references from the clipboard. It can be executed from different places depending on the type of project. For CSharp projects it can be executed from the references node. For Visual Basic and Website projects it can be executed from the project node. Copy As Project Reference This command copies a project as a project reference to the clipboard. It can be executed from a project node. Edit Project File This command opens the MSBuild project file for a selected project inside Visual Studio. It combines the existing Unload Project and Edit Project commands. Open Containing Folder This command opens a Windows Explorer window pointing to the physical path of a selected item. It can be executed from a project item node Open Command Prompt This command opens a Visual Studio command prompt pointing to the physical path of a selected item. It can be executed from four different places: solution, project, folder and project item nodes respectively. Unload Projects This command unloads all projects in a solution. This can be useful in MSBuild scenarios when multiple projects are being edited. This command can be executed from the solution node. Reload Projects This command reloads all unloaded projects in a solution. It can be executed from the solution node. Remove and Sort Usings This command removes and sort using statements for all classes given a project. It is useful, for example, in removing or organizing the using statements generated by a wizard. This command can be executed from a solution node or a single project node. Extract Constant This command creates a constant definition statement for a selected text. Extracting a constant effectively names a literal value, which can improve readability. This command can be executed from the code editor by right-clicking selected text. Clear Recent File List This command clears the Visual Studio recent file list. The Clear Recent File List command brings up a Clear File dialog which allows any or all recent files to be selected. Clear Recent Project List This command clears the Visual Studio recent project list. The Clear Recent Project List command brings up a Clear File dialog which allows any or all recent projects to be selected. Transform Templates This command executes a custom tool with associated text templates items. It can be executed from a DSL project node or a DSL folder node. Close All This command closes all documents. It can be executed from a document tab. How to temporarily disable extensions Extensions provide a great way to make Visual Studio even more powerful, and can help improve your overall productivity.  One thing to keep in mind, though, is that extensions run within the Visual Studio process (DevEnv.exe) and so a bug within an extension can impact both the stability and performance of Visual Studio.  If you ever run into a situation where things seem slower than they should, or if you crash repeatedly, please temporarily disable any installed extensions and see if that fixes the problem.  You can do this for extensions that were installed via the online gallery by re-running the extension manager (using the Tools->Extension Manager menu option) and by selecting the “Installed Extensions” node on the top-left of the dialog – and then by clicking “Disable” on any of the extensions within your installed list: Hope this helps, Scott

    Read the article

  • Add Free Google Apps to Your Website or Blog

    - by Matthew Guay
    Would you like to have an email address from your own domain, but prefer Gmail’s interface and integration with Google Docs?  Here’s how you can add the free Google Apps Standard to your site and get the best of both worlds. Note: To signup for Google Apps and get it setup on your domain, you will need to be able to add info to your WordPress blog or change Domain settings manually. Getting Started Head to the Google Apps signup page (link below), and click the Get Started button on the right.  Note that we are signing up for the free Google Apps which allows a max of 50 users; if you need more than 50 email addresses for your domain, you can choose Premiere Edition instead for $50/year. Select that you are the Administrator of the domain, and enter the domain or subdomain you want to use with Google Apps.  Here we’re adding Google Apps to the techinch.com site, but we could instead add Apps to mail.techinch.com if needed…click Get Started. Enter your name, phone number, an existing email address, and other Administrator information.  The Apps signup page also includes some survey questions about your organization, but you only have to fill in the required fields. On the next page, enter a username and password for the administrator account.  Note that the user name will also be the administrative email address as [email protected]. Now you’re ready to authenticate your Google Apps account with your domain.  The steps are slightly different depending on whether your site is on WordPress.com or on your own hosting service or server, so we’ll show how to do it both ways.   Authenticate and Integrate Google Apps with WordPress.com To add Google Apps to a domain you have linked to your WordPress.com blog, select Change yourdomain.com CNAME record and click Continue. Copy the code under #2, which should be something like googleabcdefg123456.  Do not click the button at the bottom; wait until we’ve completed the next step.   Now, in a separate browser window or tab, open your WordPress Dashboard.  Click the arrow beside Upgrades, and select Domains from the menu. Click the Edit DNS link beside the domain name you’re adding to Google Apps. Scroll down to the Google Apps section, and paste your code from Google Apps into the verification code field.  Click Generate DNS records when you’re done. This will add the needed DNS settings to your records in the box above the Google Apps section.  Click Save DNS records. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Authenticate Google Apps on Your Own Server If your website is hosted on your own server or hosting account, you’ll need to take a few more steps to add Google Apps to your domain.  You can add a CNAME record to your domain host using the same information that you would use with a WordPress account, or you can upload an HTML file to your site’s main directory.  In this test we’re going to upload an HTML file to our site for verification. Copy the code under #1, which should be something like googleabcdefg123456.  Do not click the button at the bottom; wait until we’ve completed the next step first. Create a new HTML file and paste the code in it.  You can do this easily in Notepad: create a new document, paste the code, and then save as googlehostedservice.html.  Make sure to select the type as All Files or otherwise the file will have a .txt extension. Upload this file to your web server via FTP or a web dashboard for your site.  Make sure it is in the top level of your site’s directory structure, and try visiting it at yoursite.com/googlehostedservice.html. Now, go back to the Google Apps signup page, and click I’ve completed the steps above. Setup Your Email on Google Apps When this is done, your Google Apps account should be activated and ready to finish setting up.  Google Apps will offer to launch a guide to step you through the rest of the process; you can click Launch guide if you want, or click Skip this guide to continue on your own and go directly to the Apps dashboard.   If you choose to open the guide, you’ll be able to easily learn the ropes of Google Apps administration.  Once you’ve completed the tutorial, you’ll be taken to the Google Apps dashboard. Most of the Google Apps will be available for immediate use, but Email may take a bit more setup.  Click Activate email to get your Gmail-powered email running on your domain.    Add Google MX Records to Your Server You will need to add Google MX records to your domain registrar in order to have your mail routed to Google.  If your domain is hosted on WordPress.com, you’ve already made these changes so simply click I have completed these steps.  Otherwise, you’ll need to manually add these records before clicking that button.   Adding MX Entries is fairly easy, but the steps may depend on your hosting company or registrar.  With some hosts, you may have to contact support to have them add the MX records for you.  Our site’s host uses the popular cPanel for website administration, so here’s how we added the MX Entries through cPanel. Add MX Entries through cPanel Login to your site’s cPanel, and click the MX Entry link under Mail. Delete any existing MX Records for your domain or subdomain first to avoid any complications or interactions with Google Apps.  If you think you may want to revert to your old email service in the future, save a copy of the records so you can switch back if you need. Now, enter the MX Records that Google listed.  Here’s our account after we added all of the entries to our account. Finally, return to your Google Apps Dashboard and click the I have completed these steps button at the bottom of the page. Activating Service You’re now officially finished activating and setting up your Google Apps account.  Google will first have to check the MX records for your domain; this only took around an hour in our test, but Google warns it can take up to 48 hours in some cases. You may then see that Google is updating its servers with your account information.  Once again, this took much less time than Google’s estimate. When everything’s finished, you can click the link to access the inbox of your new Administrator email account in Google Apps. Welcome to Gmail … at your own domain!  All of the Google Apps work just the same in this version as they do in the public @gmail.com version, so you should feel right at home. You can return to the Google Apps dashboard from the Administrative email account by clicking the Manage this domain at the top right. In the Dashboard, you can easily add new users and email accounts, as well as change settings in your Google Apps account and add your site’s branding to your Apps. Your Google Apps will work just like their standard @gmail.com counterparts.  Here’s an example of an inbox customized with the techinch logo and a Gmail theme. Links to Remember Here are the common links to your Google Apps online.  Substitute your domain or subdomain for yourdomain.com. Dashboard https://www.google.com/a/cpanel/yourdomain.com Email https://mail.google.com/a/yourdomain.com Calendar https://www.google.com/calendar/hosted/yourdomain.com Docs https://docs.google.com/a/yourdomain.com Sites https://sites.google.com/a/yourdomain.com Conclusion Google Apps offers you great webapps and webmail for your domain, and let’s you take advantage of Google’s services while still maintaining the professional look of your own domain.  Setting up your account can be slightly complicated, but once it’s finished, it will run seamlessly and you’ll never have to worry about email or collaboration with your team again. Signup for the free Google Apps Standard Similar Articles Productive Geek Tips Mysticgeek Blog: Create Your Own Simple iGoogle GadgetAccess Your Favorite Google Services in Chrome the Easy WayRevo Uninstaller Pro [REVIEW]Mysticgeek Blog: A Look at Internet Explorer 8 Beta 1 on Windows XPFind Similar Websites in Google Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7 Map the Stars with Stellarium Use ILovePDF To Split and Merge PDF Files TimeToMeet is a Simple Online Meeting Planning Tool Easily Create More Bookmark Toolbars in Firefox

    Read the article

  • Integrating NetBeans for Raspberry Pi Java Development

    - by speakjava
    Raspberry Pi IDE Java Development The Raspberry Pi is an incredible device for building embedded Java applications but, despite being able to run an IDE on the Pi it really pushes things to the limit.  It's much better to use a PC or laptop to develop the code and then deploy and test on the Pi.  What I thought I'd do in this blog entry was to run through the steps necessary to set up NetBeans on a PC for Java code development, with automatic deployment to the Raspberry Pi as part of the build process. I will assume that your starting point is a Raspberry Pi with an SD card that has one of the latest Raspbian images on it.  This is good because this now includes the JDK 7 as part of the distro, so no need to download and install a separate JDK.  I will also assume that you have installed the JDK and NetBeans on your PC.  These can be downloaded here. There are numerous approaches you can take to this including mounting the file system from the Raspberry Pi remotely on your development machine.  I tried this and I found that NetBeans got rather upset if the file system disappeared either through network interruption or the Raspberry Pi being turned off.  The following method uses copying over SSH, which will fail more gracefully if the Pi is not responding. Step 1: Enable SSH on the Raspberry Pi To run the Java applications you create you will need to start Java on the Raspberry Pi with the appropriate class name, classpath and parameters.  For non-JavaFX applications you can either do this from the Raspberry Pi desktop or, if you do not have a monitor connected through a remote command line.  To execute the remote command line you need to enable SSH (a secure shell login over the network) and connect using an application like PuTTY. You can enable SSH when you first boot the Raspberry Pi, as the raspi-config program runs automatically.  You can also run it at any time afterwards by running the command: sudo raspi-config This will bring up a menu of options.  Select '8 Advanced Options' and on the next screen select 'A$ SSH'.  Select 'Enable' and the task is complete. Step 2: Configure Raspberry Pi Networking By default, the Raspbian distribution configures the ethernet connection to use DHCP rather than a static IP address.  You can continue to use DHCP if you want, but to avoid having to potentially change settings whenever you reboot the Pi using a static IP address is simpler. To configure this on the Pi you need to edit the /etc/network/interfaces file.  You will need to do this as root using the sudo command, so something like sudo vi /etc/network/interfaces.  In this file you will see this line: iface eth0 inet dhcp This needs to be changed to the following: iface eth0 inet static     address 10.0.0.2     gateway 10.0.0.254     netmask 255.255.255.0 You will need to change the values in red to an appropriate IP address and to match the address of your gateway. Step 3: Create a Public-Private Key Pair On Your Development Machine How you do this will depend on which Operating system you are using: Mac OSX or Linux Run the command: ssh-keygen -t rsa Press ENTER/RETURN to accept the default destination for saving the key.  We do not need a passphrase so simply press ENTER/RETURN for an empty one and once more to confirm. The key will be created in the file .ssh/id_rsa.pub in your home directory.  Display the contents of this file using the cat command: cat ~/.ssh/id_rsa.pub Open a window, SSH to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if the file does not exist).  Copy and paste the contents of the id_rsa.pub file to the authorized_keys file and save it. Windows Since Windows is not a UNIX derivative operating system it does not include the necessary key generating software by default.  To generate the key I used puttygen.exe which is available from the same site that provides the PuTTY application, here. Download this and run it on your Windows machine.  Follow the instructions to generate a key.  I remove the key comment, but you can leave that if you want. Click "Save private key", confirm that you don't want to use a passphrase and select a filename and location for the key. Copy the public key from the part of the window marked, "Public key for pasting into OpenSSH authorized_keys file".  Use PuTTY to connect to the Raspberry Pi and login.  Change directory to .ssh and edit the authorized_keys file (don't worry if this does not exist).  Paste the key information at the end of this file and save it. Logout and then start PuTTY again.  This time we need to create a saved session using the private key.  Type in the IP address of the Raspberry Pi in the "Hostname (or IP address)" field and expand "SSH" under the "Connection" category.  Select "Auth" (see the screen shot below). Click the "Browse" button under "Private key file for authentication" and select the file you saved from puttygen. Go back to the "Session" category and enter a short name in the saved sessions field, as shown below.  Click "Save" to save the session. Step 4: Test The Configuration You should now have the ability to use scp (Mac/Linux) or pscp.exe (Windows) to copy files from your development machine to the Raspberry Pi without needing to authenticate by typing in a password (so we can automate the process in NetBeans).  It's a good idea to test this using something like: scp /tmp/foo [email protected]:/tmp on Linux or Mac or pscp.exe foo pi@raspi:/tmp on Windows (Note that we use the saved configuration name instead of the IP address or hostname so the public key is picked up). pscp.exe is another tool available from the creators of PuTTY. Step 5: Configure the NetBeans Build Script Start NetBeans and create a new project (or open an existing one that you want to deploy automatically to the Raspberry Pi). Select the Files tab in the explorer window and expand your project.  You will see a build.xml file.  Double click this to edit it. This file will mostly be comments.  At the end (but within the </project> tag) add the XML for <target name="-post-jar">, shown below Here's the code again in case you want to use cut-and-paste: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="scp" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="[email protected]:NetBeans/CopyTest"/>   </exec>  </target> For Windows it will be slightly different: <target name="-post-jar">   <echo level="info" message="Copying dist directory to remote Pi"/>   <exec executable="C:\pi\putty\pscp.exe" dir="${basedir}">     <arg line="-r"/>     <arg value="dist"/>     <arg value="pi@raspi:NetBeans/CopyTest"/>   </exec> </target> You will also need to ensure that pscp.exe is in your PATH (or specify a fully qualified pathname). From now on when you clean and build the project the dist directory will automatically be copied to the Raspberry Pi ready for testing.

    Read the article

  • Visual Studio 2010 Productivity Tips and Tricks-Part 2: Key Shortcuts

    - by ToStringTheory
    Ask anyone that knows me, and they will confirm that I hate the mouse.  This isn’t because I deny affection to objects that don’t look like their mammalian-named self, but rather for a much more simple and not-insane reason: I have terrible eyesight.  Introduction Thanks to a degenerative eye disease known as Choroideremia, I have learned to rely more on the keyboard which I can feel digital/static positions of keys relative to my fingers, than the much more analog/random position of the mouse.  Now, I would like to share some of the keyboard shortcuts with you now, as I believe that they not only increase my productivity, but yours as well once you know them (if you don’t already of course)...  I share one of my biggest tips for productivity in the conclusion at the end. Visual Studio Key Shortcuts Global Editor Shortcuts These are shortcuts that are available from almost any application running in Windows, however are many times forgotten. Shortcut Action Visual Studio 2010 Functionality Ctrl + X Cut This shortcut works without a selection. If nothing is selected, the entire line that the caret is on is cut from the editor. Ctrl + C Copy This shortcut works without a selection. If nothing is selected, the entire line that the caret is on is copied from the editor. Ctrl + V Paste If you copied an entire line by the method above, the data is pasted in the line above the current caret line. Ctrl + Shift + V Next Clipboard Element Cut/Copy multiple things, and then hit this combo repeatedly to switch to the next clipboard item when pasting. Ctrl + Backspace Delete Previous Will delete the previous word from the editor directly before the caret. If anything is selected, will just delete that. Ctrl + Del Delete Next Word Will delete the next word/space from the editor directly after the caret. If anything is selected, will just delete that. Shift + Del Delete Focused Line Will delete the line from the editor that the caret is on. If something is selected, will just delete that. Ctrl + ? or Ctrl + ? Left/Right by Word This will move the caret left or right by word or special character boundary. Holding Shift will also select the word. Ctrl + F Quick Find Either the Quick Find panel, or the search bar if you have the Productivity Power Tools installed. Ctrl + Shift + F Find in Solution Opens up the 'Find in Files' window, allowing you to search your solution, as well as using regex for pattern matching. F2 Rename File... While not debugging, selecting a file in the solution explorer\navigator and pressing F2 allows you to rename the selected file. Global Application Shortcuts These are shortcuts that are available from almost any application running in Windows, however are many times forgotten... Again... Shortcut Action Visual Studio 2010 Functionality Ctrl + N New File dialog Opens up the 'New File' dialog to add a new file to the current directory in the Solution\Project. Ctrl + O Open File dialog Opens up the 'Open File' dialog to open a file in the editor, not necessarily in the solution. Ctrl + S Save File dialog Saves the currently focused editor tab back to your HDD/SSD. Ctrl + Shift + S Save All... Quickly save all open/edited documents back to your disk. Ctrl + Tab Switch Panel\Tab Tapping this combo switches between tabs quickly. Holding down Ctrl when hitting tab will bring up a chooser window. Building Shortcuts These are shortcuts that are focused on building and running a solution. These are not usable when the IDE is in Debug mode, as the shortcut changes by context. Shortcut Action Visual Studio 2010 Functionality Ctrl + Shift + B Build Solution Starts a build process on the solution according to the current build configuration manager settings. Ctrl + Break Cancel a Building Solution Will cancel a build operation currently in progress. Good for long running builds when you think of one last change. F5 Start Debugging Will build the solution if needed and launch debugging according to the current configuration manager settings. Ctrl + F5 Start Without Debugger Will build the solution if needed and launch the startup project without attaching a debugger. Debugging Shortcuts These are shortcuts that are used when debugging a solution. Shortcut Action Visual Studio 2010 Functionality F5 Continue Execution Continues execution of code until the next breakpoint. Ctrl + Alt + Break Pause Execution Pauses the program execution. Shift + F5 Stop Debugging Stops the current debugging session. NOTE: Web apps will still continue processing after stopping the debugger. Keep this in mind if working on code such as credit card processing. Ctrl + Shift + F5 Restart Debugging Stops the current debugging session and restarts the debugging session from the beginning. F9 Place Breakpoint Toggles/Places a breakpoint in the editor on the current line. Set a breakpoint in condensed code by highlighting the statement first. F10 Step Over Statement When debugging, executes all code in methods/properties on the current line until the next line. F11 Step Into Statement When debugging, steps into a method call so you can walk through the code executed there (if available). Ctrl + Alt + I Immediate Window Open the Immediate Window to execute commands when execution is paused. Navigation Shortcuts These are shortcuts that are used for navigating in the IDE or editor panel. Shortcut Action Visual Studio 2010 Functionality F4 Properties Panel Opens the properties panel for the selected item in the editor/designer/solution navigator (context driven). F12 Go to Definition Press F12 with the caret on a member to navigate to its declaration. With the Productivity tools, Ctrl + Click works too. Ctrl + K Ctrl + T View Call Hierarchy View the call hierarchy of the member the caret is on. Great for going through n-tier solutions and interface implementations! Ctrl + Alt + B Breakpoint Window View the breakpoint window to manage breakpoints and their advanced options. Allows easy toggling of breakpoints. Ctrl + Alt + L Solution Navigator Open the solution explorer panel. Ctrl + Alt + O Output Window View the output window to see build\general output from Visual Studio. Ctrl + Alt + Enter Live Web Preview Only available with the Web Essential plugin. Launches the auto-updating Preview panel. Testing Shortcuts These are shortcuts that are used for running tests in the IDE. Please note, Visual Studio 2010 is all about context. If your caret is within a test method when you use one of these combinations, the combination will apply to that test. If your caret is within a test class, it will apply to that class. If the caret is outside of a test class, it will apply to all tests. Shortcut Action Visual Studio 2010 Functionality Ctrl + R T Run Test(s) Run all tests in the current context without a debugger attached. Breakpoints will not be stopped on. Ctrl + R Ctrl + T Run Test(s) (Debug) Run all tests in the current context with a debugger attached. This allows you to use breakpoints. Substitute A for T from the preceding combos to run/debug ALL tests in the current context. Substitute Y for T from the preceding combos to run/debug ALL impacted/covering tests for a method in the current context. Advanced Editor Shortcuts These are shortcuts that are used for more advanced editing in the editor window. Shortcut Action Visual Studio 2010 Functionality Shift + Alt + ? Shift + Alt + ? Multiline caret up/down Use this combo to edit multiple lines at once. Not too many uses for it, but once in a blue moon one comes along. Ctrl + Alt + Enter Insert Line Above Inserts a blank line above the line the caret is currently on. No need to be at end or start of line, so no cutting off words/code. Ctrl + K Ctrl + C Comment Selection Comments the current selection out of compilation. Ctrl + K Ctrl + U Uncomment Selection Uncomments the current selection into compilation. Ctrl + K Ctrl + D Format Document Automatically formats the document into a structured layout. Lines up nodes or code into columns intelligently. Alt + ? Alt + ? Code line up/down *Use this combo to move a line of code up or down quickly. Great for small rearrangements of code. *Requires the Productivity Power pack from Microsoft. Conclusion This list is by no means meant to be exhaustive, but these are the shortcuts I use regularly every hour/minute of the day. There are still 100s more in Visual Studio that you can discover through the configuration window, or by tooltips. Something that I started doing months ago seems to have interest in my office.. In my last post, I talked about how I hated a cluttered UI. One of the ways that I aimed to resolve that was by systematically cleaning up the toolbars week by week. First day, I removed ALL icons that I already knew shortcuts to, or would never use them (Undo in a toolbar?!). Then, every week from that point on, I make it a point to remove an icon/two from the toolbar and make an effort to remember its key combination. I gain extra space in the toolbar area, AND become more productive at the same time! I hope that you found this article interesting or at least somewhat informative.. Maybe a shortcut or two you didn't know. I know some of them seem trivial, but I often see people going to the edit menu for Copy/Paste... Thought a refresher might be helpful!

    Read the article

  • php script dies when it calls a bash script, maybe a problem of server configuration

    - by user347501
    Hi!!! I have some problems with a PHP script that calls a Bash script.... in the PHP script is uploaded a XML file, then the PHP script calls a Bash script that cut the file in portions (for example, is uploaded a XML file of 30,000 lines, so the Bash script cut the file in portions of 10,000 lines, so it will be 3 files of 10,000 each one) The file is uploaded, the Bash script cut the lines, but when the Bash script returns to the PHP script, the PHP script dies, & I dont know why... I tested the script in another server and it works fine... I dont believe that is a memory problem, maybe it is a processor problem, I dont know, I dont know what to do, what can I do??? (Im using the function shell_exec in PHP to call the Bash script) The error only happens if the XML file has more than 8,000 lines, but if the file has less then 8,000 everything is ok (this is relative, it depends of the amount of data, of strings, of letters that contains each line) what can you suggest me??? (sorry for my bad english, I have to practice a lot xD) I leave the code here PHP script (at the end, after the ?, there is html & javascript code, but it doesnt appear, only the javascript code... basically the html is only to upload the file) " . date('c') . ": $str"; $file = fopen("uploadxmltest.debug.txt","a"); fwrite($file,date('c') . ": $str\n"); fclose($file); } try{ if(is_uploaded_file($_FILES['tfile']['tmp_name'])){ debug("step 1: the file was uploaded"); $norg=date('y-m-d')."_".md5(microtime()); $nfle="testfiles/$norg.xml"; $ndir="testfiles/$norg"; $ndir2="testfiles/$norg"; if(move_uploaded_file($_FILES['tfile']['tmp_name'],"$nfle")){ debug("step 2: the file was moved to the directory"); debug("memory_get_usage(): " . memory_get_usage()); debug("memory_get_usage(true): " . memory_get_usage(true)); debug("memory_get_peak_usage(): " . memory_get_peak_usage()); debug("memory_get_peak_usage(true): " . memory_get_peak_usage(true)); $shll=shell_exec("./crm_cutfile_v2.sh \"$nfle\" \"$ndir\" \"$norg\" "); debug("result: $shll"); debug("memory_get_usage(): " . memory_get_usage()); debug("memory_get_usage(true): " . memory_get_usage(true)); debug("memory_get_peak_usage(): " . memory_get_peak_usage()); debug("memory_get_peak_usage(true): " . memory_get_peak_usage(true)); debug("step 3: the file was cutted. END"); } else{ debug("ERROR: I didnt move the file"); exit(); } } else{ debug("ERROR: I didnt upload the file"); //exit(); } } catch(Exception $e){ debug("Exception: " . $e-getMessage()); exit(); } ? Test function uploadFile(){ alert("start"); if(document.test.tfile.value==""){ alert("First you have to upload a file"); } else{ document.test.submit(); } } Bash script with AWK #!/bin/bash #For single messages (one message per contact) function cutfile(){ lines=$( cat "$1" | awk 'END {print NR}' ) fline="$4"; if [ -d "$2" ]; then exsts=1 else mkdir "$2" fi cp "$1" "$2/datasource.xml" cd "$2" i=1 contfile=1 while [ $i -le $lines ] do currentline=$( cat "datasource.xml" | awk -v fl=$i 'NR==fl {print $0}' ) #creates first file if [ $i -eq 1 ]; then echo "$fline" "$3_1.txt" else #creates the rest of files when there are more than 10,000 contacts rsd=$(( ( $i - 2 ) % 10000 )) if [ $rsd -eq 0 ]; then echo "" "$3_$contfile.txt" contfile=$(( $contfile + 1 )) echo "$fline" "$3_$contfile.txt" fi fi echo "$currentline" "$3_$contfile.txt" i=$(( $i + 1 )) done echo "" "$3_$contfile.txt" return 1 } #For multiple messages (one message for all contacts) function cutfile_multi(){ return 1 } cutfile "$1" "$2" "$3" "$4" echo 1 thanks!!!!! =D

    Read the article

  • VBA nested Loop flow control

    - by PCGIZMO
    I will be brief and stick to what I know. This code for the most part works as it should. The only issue is in the iteration of the x and z loop. these to loops should set the range and yLABEL for the Y loop. I can get through a set and come up with the correct range after that things go bonkers. I know some of it has to do with not breaking out of x to set z and then back to x update the range. It should work z is found then x. the range between them is set for y. then next x but y stays then rang between y and x is set for y.. so on and so forth kinda like a slinky down the stairs. or a slide rule depending on how I set the loops either way I end up all over the place after a couple iterations. I have done a few things but each time I break out of x to set z , X restarts at the top of the range. At least that's what I think I am seeing. In the example sheet i have since changed the way the way the offset works with the loop but the idea is still the same. I have goto statements at this time i was going to try figuring out conditional switches after the loops were working. Any help direction or advice is appreciated. Option Explicit Sub parse() Application.DisplayAlerts = False 'Application.EnableCancelKey = xlDisabled Dim strPath As String, strPathused As String strPath = "C:\clerk plan2" Dim objfso As FileSystemObject, objFolder As Folder, objfile As Object Set objfso = CreateObject("Scripting.FileSystemObject") Set objFolder = objfso.GetFolder(strPath) 'Loop through objWorkBooks For Each objfile In objFolder.Files If objfso.GetExtensionName(objfile.Path) = "xlsx" Then Dim objWorkbook As Workbook Set objWorkbook = Workbooks.Open(objfile.Path) ' Set path for move to at end of script strPathused = "C:\prodplan\used\" & objWorkbook.Name objWorkbook.Worksheets("inbound transfer sheet").Activate objWorkbook.Worksheets("inbound transfer sheet").Cells.UnMerge 'Range management WB Dim SRCwb As Worksheet, SRCrange1 As Range, SRCrange2 As Range, lastrow As Range Set SRCwb = objWorkbook.Worksheets("inbound transfer sheet") Set SRCrange1 = SRCwb.Range("g3:g150") Set SRCrange2 = SRCwb.Range("a1:a150") Dim DSTws As Worksheet Set DSTws = Workbooks("clerkplan2.xlsm").Worksheets("transfer") Dim STR1 As String, STR2 As String, xVAL As String, zVAL As String, xSTR As String, zSTR As String STR1 = "INBOUND TRANS" STR2 = "INBOUND CA TRANS" Dim x As Variant, z As Variant, y As Variant, zxRANGE As Range For Each z In SRCrange2 zSTR = Mid(z, 1, 16) If zSTR <> STR2 Then GoTo zNEXT If zSTR = STR2 Then zVAL = z End If For Each x In SRCrange2 xSTR = Mid(x, 1, 13) If xSTR <> STR1 Then GoTo xNEXT If xSTR = STR1 Then xVAL = x End If Dim yLABEL As String If xVAL = x And zVAL = z Then If x.Row > z.Row Then Set zxRANGE = SRCwb.Range(x.Offset(1, 0).Address & " : " & z.Offset(-1, 0).Address) yLABEL = z.Value Else Set zxRANGE = SRCwb.Range(z.Offset(-1, 0).Address & " : " & x.Offset(1, 0).Address) yLABEL = x.Value End If End If MsgBox zxRANGE.Address ' DEBUG For Each y In zxRANGE If y.Offset(0, 6) = "Temp" Or y.Offset(0, 14) = "Begin Time" Or y.Offset(0, 15) = "End Time" Or _ Len(y.Offset(0, 6)) = 0 Or Len(y.Offset(0, 14)) = 0 Or Len(y.Offset(0, 15)) = "0" Then yNEXT Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("c" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) y.Offset(0, 6).Copy lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False DSTws.Activate ActiveCell.Offset(0, -1) = objWorkbook.Name ActiveCell.Offset(0, -2) = yLABEL objWorkbook.Activate y.Offset(0, 14).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("d" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False objWorkbook.Activate y.Offset(0, 15).Copy Set lastrow = Workbooks("clerkplan2.xlsm").Worksheets("transfer").Range("e" & DSTws.Rows.Count).End(xlUp).Offset(1, 0) lastrow.PasteSpecial Paste:=xlPasteValues, operation:=xlNone, skipblanks:=True, Transpose:=False yNEXT: Next y xNEXT: Next x zNEXT: Next z strPathused = "C:\clerk plan2\used\" & objWorkbook.Name objWorkbook.Close False 'Move proccesed file to new Dir Dim OldFilePath As String Dim NewFilePath As String OldFilePath = objfile 'original file location NewFilePath = strPathused ' new file location Name OldFilePath As NewFilePath ' move the file End If Next End Sub

    Read the article

< Previous Page | 36 37 38 39 40 41 42 43 44 45 46 47  | Next Page >