Search Results

Search found 11147 results on 446 pages for 'background foreground'.

Page 400/446 | < Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >

• Intermittent Disconnection of Client Computers from Domain Server

  - by dilip nagle

  The Background: I have Windows 2008 server Enterprise Version with 25 user cal licences. It has a domain and all users and a network shared HP printer in it. The Server has two network cards and both these cards as well as all client machines are on IP addressing scheme of 192.168.1.* with subnetmask 255.255.255.0. Of the two network cards viz. 192.168.1.231 and 192.168.1.233, only 192.168.1.231 is registered with DNS. In 192.168.1.233(i.e. 2nd network card) has default getway as 192.168.1.231 and dns address as 192.168.1.231. The Server has three hard disks with capacities as 500gb, 500gb and 1TB and are partitioned as (C,D,E), (F,G) and (K) with partition K having all user data into various Shared Folders. Each of these folders(On Partition K), are mapped onto each user's computer as per the right of access given to them. The Problem: The Server was installed about 6 months ago and till date not even once, the Server has Hung or has given any problem. All the Clients computers are able to run the web based software from their computers via ip address, e.g. http://192.168.1.231/webERP/default.aspx. However, occassionally, when any client computer tries to browse network mappings, it hangs. Again, there is no fixed pattern. This may happen after running smoothly for say 3 days. On each Client's machine, the network settings are as follows: IP Address: 192.168.1.* where * is 1,2,3 .... Sunnetmask: 255.255.255.0 defauly getway: 192.168.1.231 Which is a server card and DNS address. preferred DNS Server: 192.168.1.231 In Advanced Tab under Wins: LMHostLookup is Unticked and default is radio buttoned. Ideally, I would have loved to have Disabled NETBIOS over TCP/IP but some network printers do not get accessed if this option is enabled(ie. Radio Buttoned). Bacause Disabling Netbios will drastically reduce traffic of NETBIOS broadcasting to all the computers on the net to do naming resolution. On Server, I have WINs Running which I have Scavanged Records, verified Database Integrity etc, removed Tombstoned Records etc. The Critical Errors shown only once a day when the server is statred are 4224(WINS) and 12923 - Server Licencing failed to Update DNS Record. I fail to understand as why do client machines HANG when they try to browse mapped network shared folders on K Drive. Kindly Advice

  Read the article

• how to diagnosis and resolve: /usr/lib64/libz.so.1: no version information available

  - by matchew

  I had a hell of a time installing lxml for python2.7 on centOs5.6. For some background, python2.7 is an alternative installation of python on centOS5.6 which comes with python2.4 installed. it was bulit from source per its instrucitons ./configure make make altinstall However, after about 20 hours of trying I managed to find a workable solution and was able to install lxml. Until, I notice the following error at the top of the interpreter: python2.7: /usr/lib64/libz.so.1: no version information available (required by python2.7) Python 2.7.2 (default, Jun 30 2011, 18:55:26) [GCC 4.1.2 20080704 (Red Hat 4.1.2-50)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> print 'Sheeeeut!' this error is printed out everytime I run a script. For example: $ ./test.py /usr/local/bin/python2.7: /usr/lib64/libz.so.1: no version information available (required by /usr/local/bin/python2.7) the script runs flawlessly, but this error is bothersome. After some digging I have seem to believe I have a wrong version of libz installed, that it is either an older version or built for a different platform. I'm not quite sure how, I've only installed libz through yum, as far as I know. Although, I can't quite remember every little thing I tried in my twenty hours of trying. You may also be intereted in what my lib64 folder looks like, here is some information $ ls -ltrh libz* -rwxr-xr-x 1 root root 84K Jan 9 2007 libz.so.1.2.3 -rwxr-xr-x 1 root root 107K Jan 9 2007 libz.a -rwxr-xr-x 1 root root 154K Feb 22 23:30 libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Apr 20 20:46 libz.so.1 -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jun 30 18:43 libzdb.so.7 -> libzdb.so.7.0.2 lrwxrwxrwx 1 root root 13 Jul 1 11:35 libz.so -> libz.so.1.2.3 lrwxrwxrwx 1 root root 15 Jul 1 11:35 libzdb.so -> libzdb.so.7.0.2 notice: the items that Say Jul 1st or Jun 30th are from me. I had initially moved these files into a backup folder as they seeemed to be 1. duplicates and 2. had a date after/during my problems I alluded to earlier that I had with lxml One inclination is to completely remove python2.7 and re-install. I think having it install to /usr/local/ was a poor default choice. However, without the make uninstall option being present it seems to be a time consuming task for a solution I am not quite sure would solve my problem.

  Read the article

• HP MSR 30-10a Router - Route Traffic over Default Route

  - by SteadH

  We have a brand new HP MSR 30-10a Router. We have a fairly simple routing situation - we have two IP blocks, one which has a route out. We need things on the first block to go through the router, and out. I have an old Cisco 2801 router doing the job right now. For our example - IP Block 1: 50.203.110.232/29, Router interface on this block is 50.203.110.237, route out is 50.203.110.233. IP Block 2: 50.202.219.1/27, Router interface on this block at 50.202.219.20. I have a static route created for: 0.0.0.0 0.0.0.0 50.203.110.233 The router seems to understand this. When on the CLI via serial cable, I can ping 8.8.8.8 and hear responses from Google DNS. Woo hoo! The issue arrives when any client sits on the IP Block 2 side. I configured my client with a static IP of 50.202.219.15/27, default gateway 50.202.219.20. I can ping myself. I can ping the near side of the router (50.202.219.20), and I can ping the far side of the router (50.203.110.237. I cannot ping anything else in IP block 1, nor can I ping 8.8.8.8. Here is my configuration file: <HP>display current-configuration # version 5.20.106, Release 2507, Standard # sysname HP # domain default enable system # dar p2p signature-file flash:/p2p_default.mtd # port-security enable # undo ip http enable # password-recovery enable # vlan 1 # domain system access-limit disable state active idle-cut disable self-service-url disable # user-group system group-attribute allow-guest # local-user admin password cipher $c$3$40gC1cxf/wIJNa1ufFPJsjKAof+QP5aV authorization-attribute level 3 service-type telnet # cwmp undo cwmp enable # interface Aux0 async mode flow link-protocol ppp # interface Cellular0/0 async mode protocol link-protocol ppp # interface Ethernet0/0 port link-mode route ip address 50.203.110.237 255.255.255.248 # interface Ethernet0/1 port link-mode route ip address 50.202.219.20 255.255.255.224 # interface NULL0 # ip route-static 0.0.0.0 0.0.0.0 50.203.110.233 permanent # load xml-configuration # load tr069-configuration # user-interface tty 12 user-interface aux 0 user-interface vty 0 4 authentication-mode scheme # My guess right now is there is some sort of "permission" needed to use the default route. The manuals haven't turned up a lot in this area that don't make the situation much more complicated (but maybe it needs to be more complicated?) Background: we use HP switches, and I love the CLI. I bought HP thinking the command line interface would be similar, or at least speak the same language. Whoops! I'd be happy to provide more information or perform any additional tests. Thanks in advance! Update 1: The manual mentions routing rules. I hadn't previously added these (since our Cisco 2801 seems to route anything by default). I added: ip ip-prefix 1 permit 0.0.0.0 0 less-equal 32 alas, still no dice.

  Read the article

• Do glue records in non-circular dns-lookups speed up domain resolution or not?

  - by Joe Hopfgartner

  Doing a lookup for my domain on http://www.intodns.com/ I noticed theese two messages: In Parent section: DNS Parent sent Glue The parent nameserver g.gtld-servers.net is not sending out GLUE for every nameservers listed, meaning he is sending out your nameservers host names without sending the A records of those nameservers. It's ok but you have to know that this will require an extra A lookup that can delay a little the connections to your site. This happens a lot if you have nameservers on different TLD (domain.com for example with nameserver ns.domain.org.) and in NS section: Glue for NS records INFO: GLUE was not sent when I asked your nameservers for your NS records.This is ok but you should know that in this case an extra A record lookup is required in order to get the IPs of your NS records. The nameservers without glue are: 109.230.225.96 84.201.40.52 You can fix this for example by adding A records to your nameservers for the zones listed above. I do perfectly understand that the primary objective of glue records is to resolve circular dependencies. The classic use case: my domain is example.com and I want to have the nameserver ns1.example.com. This will never work because i cannot know the ip of ns1.example.com if I don't fetch example.com and in order to do that I need to fetch it from ns1.example.com. To resolve this deadlock I add a glue record to ns1.example.com containing the ip adress of the nameserver, so this can work out. So this problem does not occour if the nameservers are in a different TLD than the domain i want to look up. But however to fetch the zone information from the nameservers I need to know their ip adress right? And in order to know that i need to fetch the zone the nameservers are in from their respective nameservers, right? (or rather my ISP needs to do that in the background) So an extra lookup that takes time? If I now have glue records, I know the IP adress right away without the need to look it up - so this should speed up the resolution of my domain, shouldnt it? However my DNS zone provider (tecserver.at) replied that this would make no sense because "we are not running ns1.ourdomain.com an ns1.ourdomain.com as authorative NS for ourdomain.com. This would be the only sense for glue records. Tecserver has a glue record because the NS for tecserver.at are ns1.tecserver.at and ns2.tecserver.at. Therefore a glue record is needed for resolution.

  Read the article

• Excluding child processes from ps

  - by stefpet

  Background: To reload app configuration I need to kill -HUP the parent processes' PIDs. To find PIDs I currently use ps auxf | grep gunicorn with the following example output: $ ps auxf | grep gunicorn stpe 4222 0.0 0.2 64524 11668 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4225 0.0 0.4 76920 16332 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4226 0.0 0.4 76932 16340 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4227 0.0 0.4 76940 16344 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4228 0.0 0.4 76948 16344 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4229 0.0 0.4 76960 16356 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4230 0.0 0.4 76972 16368 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4231 0.0 0.4 78856 18644 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 4232 0.0 0.4 76992 16376 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 5685 0.0 0.0 22076 908 pts/1 S+ 11:50 0:00 | \_ grep --color=auto gunicorn stpe 5012 0.0 0.2 64512 11656 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5021 0.0 0.4 77656 17156 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5022 0.0 0.4 77664 17156 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5023 0.0 0.4 77672 17164 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5024 0.0 0.4 77684 17196 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5025 0.0 0.4 77692 17200 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5026 0.0 0.4 77700 17208 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5027 0.0 0.4 77712 17220 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py stpe 5028 0.0 0.4 77720 17220 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py Based on the above I see that it is 4222 and 5012 I need to HUP. Question: How can I exclude the child processes and only get the parent process (please note however that the processes I want do also have a parent (e.g. bash) that I'm uninterested with)? Using a regexp with grep on how much indentation there is in the ascii tree feels dirty. Is there a better way? Example: The desired output would be something like this. stpe 4222 0.0 0.2 64524 11668 pts/2 S+ 11:01 0:00 | \_ /usr/bin/python /usr/local/bin/gunicorn app_api:app -c app_api.ini.py stpe 5012 0.0 0.2 64512 11656 pts/3 S+ 11:22 0:00 \_ /usr/bin/python /usr/local/bin/gunicorn app_game_api:app -c app_game_api.ini.py This would be easily parseable to be able to automatically find the PIDs in a script that does the HUPing which is the goal.

  Read the article

• nginx probably deliering wrong filetype for .css file with php tags

  - by Katai

  And again - NGINX is giving me many Questions today :) Like always, I already tried around for a while, but cant seem to fix this issue: I just configured NGINX to handle my .css files equal to my .php files (to parse PHP tags inside the CSS file). This works perfectly, and the file is found and delivered. I could debug it with FIrebug, and everything is OK (it displays the contents of the .css inside the opened <link> tag). So, everything working, right? Wrong. It has the CSS, but it does not interpret it! What I mean by this: apparently, the file-type of the CSS (or aplication-type, whatever) is wrong. The Page can access the CSS, but doesnt bother at all to actually use it. What I checked / tried: There are no PHP errors inside of the .css, so that one is out The .css is accessible. I can call the URI manually, or check if the included URL finds it: both works The .css has no syntax errors (i switched to a css that just has body {background-color: #000; } It works whitout NGINX I deleted the browser cache / restarted NGINX after config rewrites Here the configuration: server { listen 80; server_name localhost; access_log /var/log/nginx/board.access_log; error_log /var/log/nginx/board.error_log warn; root /var/www/board/public; index index.php; fastcgi_index index.php; location / { try_files $uri $uri /index.php; } location ~ (\.php|\.css)$ { try_files $uri =404; include /etc/nginx/fastcgi_params; #keepalive_timeout 0; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_pass 127.0.0.1:7777; } } Firebug 'Network' Response Header: Connection keep-alive Content-Encoding gzip Content-Type text/html Date Sat, 16 Jun 2012 10:08:40 GMT Server nginx/1.0.5 Transfer-Encoding chunked X-Powered-By PHP/5.3.6-13ubuntu3.7 I think I just answered my own question. Is the Content-Type text/html the problem? How can I remove that? My personal guess is that I have to use this in some way include /etc/nginx/mime.types; default_type application/octet-stream; But I'm not sure... anyone an idea how to solve this? TLDR; CSS file is delivered correctly, but it doesnt seem to be 'used' as CSS from the browser. (Tested, works on apache)

  Read the article

• Buying a new printer instead of replacing ink?

  - by Kelsey

  With prices of basic printers being around $40 - $50 and a ink cartridge being around $20 - $30 each for black AND color. It costs me more to replace the printer's ink than to just buy a brand new printer. This just seems like a total waste of materials though (I have 4 printers sitting in my basement with no ink). I know the ink cartridges are smaller (not as full) in a new printer but I go through it in about 1 to 1.5 years only and by then my $40 gets me a better printer to boot. Also with certain printers the heads are not part of the ink (Epson use to do this and still might) so I get new heads as well. Is this a bad practice? Are retailers making this a reality when they are selling working hardware cheaper than replacement parts? Is there something more I should be considering? Edit: Some background, long ago I bought an Epson printer which I used to print docs etc vary rarely. The ink started running low so I bought to new carts for around $60 if I recall. The printer then stopped working so I replaced the carts with the new ones but the head was dead on the black which was not worth repairing. I bought a new HP printer for $49. This lasted around 1.5yrs and then the ink ran out, I went to buy new carts and the guy at the store got me to buy a new printer (that was smaller, faster, higher dpi, etc) and it was cheaper than replacing the ink. When the ink ran out on that one I bought a new printer again, etc. The printer gets used maybe once a week at most and I never print photos or anything. It normally is jsut stored away unplugged accumulating dust. People say to buy a laser printer but they are much larger, do not print color, (in the price range I am looking at) and might have the exact same issues. The problem I see is the manufacturer is making my behaviour possible by selling new printers at a loss hoping that they will cash in on the ink later. How can they produce a printer for so cheap which HAS ink in it, and the refills cost more than the unit? It can't.

  Read the article

• Custom built machine has much higher power consumption than expected

  - by foraidt

  I built a machine according to the specs of a computer magazine (c't, Germany). According to the magazine, the power consumption should be at around 10W. I don't want to go into the specifics of the hardware but rather ask for general advice on where to look: I updated the BIOS/UEFI version to the latest version, installed all the recommended drivers and unplugged all hardware that's not necessary to boot into Windows. All that was left is the power supply, mainboard, cpu, cpu cooler and one SSD drive. But still I measured a power consumption of 50W, which is 40W more than it should be. I tried booting Linux Mint from a USB stick, so I don't think it's some Windows-related problem.. Where else could I look? Update 1 I dind't want the question to get closed for being too localized but if more details are necessary, here they are: The system is a desktop PC. The power consumption is measured using a Brennenstuhl PM 231 device, which was tested also by c't and they found it quite accurate. The PSU is an Enermax ETL300AWT, the mainboard Intel DH87RL (Socket 1150) and the CPU Intel G3220 (Haswell). Update 2 There is no online version of the article*. The most details I found can be read on its project page (in German, though...) (*)You can pay for downloadable PDFs, however. English translation of that project page Update 3 Regarding the sceptics: It may sound ridiculous but apparently 10W idle consumption is possible with Intel's Haswell architecture. As a kind of proof, there's an additional Blog article explicitly listing the steps needed to reduce the idle consumption to 10W. Additional hardware: I measured the consumption without the HDD, and as expected the usage dropped by around 10W. I have no chassis fans and the CPU fan is a "Scythe Mugen 4" model. It runs at around 600rpm so I think it won't draw much. When stripping off all my extra components I should be at 10W. But I'm not getting anywhere near that. I would be happy to see "just" 15W in the stripped down version but currently I'm not getting below 50W no matter which component I remove. As I see it this cannot be explained by the PSU being less efficient at lower consumption. I also waited half an hour or so (also checked that no Windows updates were running in the background) and the consumption dind't drop by more than a few watts.

  Read the article

• Legacy VB6 application under Win7 SQL error

  - by Shial

  We have a rather unfortunate legacy application at work, written originally in VB6 it predates anybody in our IT department by at least 5 years. We have a contracted developer for ongoing maintenance and where he can he rewrites sections over into .NET code (Not sure about his techniques here, this is a side job for his regular work as an IBM engineer) the application works fine (such as it is) under windows XP. We have only a couple of Windows 7 machines mainly for testing and this application seems to run into a wall. Things like the background not loading and SQL errors. This is even running under administrator. Running an SQL trace from the ODBC control panel shows several interesting things. It makes a connection to the database successfully initially where it runs a query to determine if it is running the correct version. This query works fine. 558-1af0 ENTER SQLExecDirectW HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 BMS 558-1af0 EXIT SQLExecDirectW with return code 1 (SQL_SUCCESS_WITH_INFO) HSTMT 0x020D7548 WCHAR * 0x04C8F0F0 [ 115] "SELECT count(*) c FROM tblSoftwareVersion WHERE fldSoftwareVersion = '123456' AND fldSoftwareName = 'Application.VB'" SDWORD 115 It then seems to drop its connection and can't find the ODBC connection despite the fact its connecting to the same DB. From the trace it looks like it configures the connection then it starts firing off SQLFreeStmt to unbind and close out then when in the application and it tries to do its thing there is no connection. 558-1af0 ENTER SQLFreeStmt HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> BMS 558-1af0 EXIT SQLFreeStmt with return code 0 (SQL_SUCCESS) HSTMT 0x020D7548 UWORD 2 <SQL_UNBIND> Then this happens when I try to do something that pulls data 558-1af0 ENTER SQLDriverConnectW HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> BMS 558-1af0 EXIT SQLDriverConnectW with return code -1 (SQL_ERROR) HDBC 0x020DDA00 HWND 0x00000000 WCHAR * 0x73EF8634 [ -3] "******\ 0" SWORD -3 WCHAR * 0x73EF8634 SWORD -3 SWORD * 0x00000000 UWORD 0 <SQL_DRIVER_NOPROMPT> DIAG [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified (0) Nearly all of my searching on this issue comes up with programming issues where the connection string has a problem. The only thing that is different in this particular scenario though is Windows 7, I know the connection string is fine since it works on the XP machines. The VB components are supposed to be still functional under Win7. My computer is running 32 bit win7 and my VP is running Win7 64 bit and both have the same problem so that can be ruled out. I have already tried reinstalling the SQL Native Client and the VB runtime as well as the application in question. Hopefully I can find a solution and not have to resort to using the XP VM.

  Read the article

• Network use of Gaming PC

  - by Matthew Patrick Cashatt

  Background After YEARS of waiting, I built the custom gaming PC of my dreams: Intel i7 - 975 Extreme Edition 3.3ghz (overclocked to 4.0) ATI Radeon 5970 2gb Corsair 256 gb SSD Drive 2 TB Sata II 3.0 7200rpm data drive 12 GB Kingston Hyper-X (1600mhz) DDR3 Windows 7 Ultra 64 bit And so on. . . Problem I hooked this beast up to our home theater and settled in for a great gaming season only to realize a couple of drawbacks: It's hard to accurately wax bad guys using a keyboard in your lap whilst reclined on your couch (and using a wireless keyboard). It's hard to read the text on the screen (i.e. menus, etc). I find that a 1:1 ratio (screen diagonal inch to inch away from screen) is optimum, but using the home theater, it's more like 1:3 which has me squinting unless I sit on the coffee table. The wife always seems to want the TV the same time I do and, unfortunately "Real Housewives of Beverly Hills" and Battlefield BC don't mix. I am losing the battle in the home theater room, but the PC has to stay there (long story). So, this leaves me with the option of playing in my home office which is about 30 feet away from the home theater. I am a software developer so I have a pretty decent set up in my office--multiple 1080p monitors, HP Envy 17 which can run games like Crysis in 720p with out stammering too much. Also, I can game very comfortably at my desk in the office. Still, even though the set up in my office can run games well enough, I don't want to regress to that when I have worked YEARS for an awesome gaming PC that can run everything on ultra high settings. My Question What are my options for running my games on the beastly desktop in the Home Theater, but physically playing in my office about 30 feet away? A really long HDMI cable? LAN/RDC? Details that May Help We have an open crawlspace so running cable from HT room to office is no problem. I already have networked the house with a LAN Any help is GREATLY appreciated. Thanks, Matt

  Read the article

• PCI-DSS compliance for business with only swipe terminals [migrated]

  - by rowatt

  I support the IT infrastructure for a small retail business which is now required to undergo a PCI-DSS assessment. The payment service and terminal provider (Streamline) has asked that we use Trustwave to do the PCI-DSS certification. The problem I face is that if I answer all questions and follow Trustwave's requirements to the letter, we will have to invest significantly in networking equipment to segment LANs and /or do internal vulnerability scanning, while at the same time Streamline assures me that the terminals we have (Verifone VX670-B and MagIC3 X-8) are secure, don't store any credit card information and are PCI-DSS compliant so by implication we don't need to take any action to ensure their network security. I'm looking for any suggestions as to how we can most easily meet the networking requirements for PCI-DSS. Some background on our current network setup: single wired LAN, also with WiFi turned on (though if this creates any PCI-DSS complexities we can turn it off). single Netgear ADSL router. This is the only firewall we have in place, and the firewall is out the box configuration (i.e. no DMZ, SNMP etc). Passwords have been changed though :-) a few windows PCs and 2 windows based tills, none of which ever see any credit card information at all. two swipe terminals. Until a few months ago (before we were told we had to be PCI-DSS certified) these terminals did auth/capture over the phone. Streamline suggested we moved to their IP Broadband service, which instead uses an SSL encrypted channel over the internet to do auth/capture, so we now use that service. We don't do any ecommerce or receive payments over the internet. All transactions are either cardholder present, or MOTO with details given over phone and typed direct into terminal. We're based in the UK. As I currently understand it we have three options in order to get PCI-DSS certification. segment our network so the POS terminals are isolated from all PCs, and set up internal vulnerability scanning on that network. don't segment the network, and have to do more internal scanning and have more onerous management of PCs than I think we need (for example, though the tills are Windows based, they are fully managed so I have no control over software update policies, anti virus etc). All PCs have anti virus (MSE) and windows updates automatically applied, but we don't have any centralised go back to auth/capture over phone lines. I can't imagine we are the first merchant to be in this situation. I'm looking for any recommendations a simple, cost effective way to be PCI-DSS compliant - either by doing 1 or 2 above with (hopefully) simple and inexpensive equipment/software, or any other ways if there's a better way to do this. Or... should we just go back to the digital stone age and do auth/capture over the phone, which means we don't need to do anything on our network to be PCI-DSS certified?

  Read the article

• What presentation software suits my needs?

  - by claws

  Background: I'm teaching biology to 12th grade students. The syllabus I'm teaching is huge. I mean literally, very huge. There is a lot for students to remember. There are no less than 1000 facts (weird names, dates etc) for students to remember. They'll have to remember all of them, they don't have a choice. The notes I compiled for their learning itself is upto 80 printed pages(Just the bullet outline & facts). That's just one chapter. We have 34 chapters. Also my students are very hardworking, they study upto 8-10hrs per day (Yeah! we are from India :). So, I want to ensure maximum retaining by the students at each and every stage (Teaching & Learning). I'm trying to as many memory training techniques as possible. I'm trying to incorporate, mnemonics, strong visual aids (pictures, 3D-animations, real videos etc.), spaced repetition etc. I think MS powerpoint is not suitable for my needs: There are about 200 slides per chapter. Its very easy for students to get lost while teaching. Because the problem with powerpoint is that it gives facts (as bullets) but it doesn't exploit the association & organization (Concept Map) of the content, which helps students learn quickly. I found an amazing software called XMind. You can see the screenshot here. Problem is that it is not as powerpoint in terms of powerpoint. This software can be used for just for concept maps. In the above screenshot, each topic occupies a single slide. I have an Image/picture(Detailed huge picture) and about 5-10 bullet points and probably a video or an animation of somethings. And this XMind is not good at presenting, in terms that it doesn't allow me to set what to present after what. I want to present a top down view, with a slide for each topic. PS: I Don't like prezi.com. I tried but it simply is too confusing for my students. It zooms here and there. I didn't tried it but I've seen few presentations.

  Read the article

• Is it safe to enable forced ASLR via EMET on Windows?

  - by D.W.

  I'd like to enable forced ASLR for all DLLs on Windows. Is this safe? Background: ASLR is an important security mechanism that helps defend against code injection attacks. DLLs can opt into ASLR, and most do, but some DLLs have not opted into ASLR. If a program loads even a single non-ASLRized DLL, then the program doesn't get the benefit/protection of ASLR. This is a problem, because there are a non-trivial number of DLLs that haven't opted into ASLR. For instance, it was recently revealed that Dropbox injects a DLL into a bunch of processes, and the Dropbox DLL doesn't have ASLR turned on, which negates any ASLR protection they otherwise would have had. Unfortunately, there are many other widely used DLLs that haven't opted into ASLR. This is bad for system security. Microsoft provides several ways to turn on ASLR for all DLLs, even ones that haven't opted into ASLR: On Windows 7 and Windows Server 2008, you can enable "Force ASLR" in the registry. On all Windows versions, you can use Microsoft's EMET tool and enable EMET's "Mandatory ASLR" option. These methods are possible because all DLLs are compiled as position-independent code and they can be relocated to a random location even if they haven't opted into ASLR. These options will ensure that ASLR is turned on, even if the developers of the DLL forgot to opt into ASLR. Thus, forcing on ASLR systemwide may help system security. In principle, turning on forced ASLR could potentially break a poorly-written DLL, so there is some risk of breakage. I'm interested in finding out just significant this risk is. I have the suspicion that this kind of breakage might be extremely rare. Here's what I've been able to find: Microsoft has done compatibility testing with several dozen widely used applications. The only one they found where Mandatory ASLR causes problems is Windows Media Player. All the other applications continue working fine. (See pp.39-41 of this document.) I've seen some anecdotal reports that enabling "Mandatory ASLR"/"Force ASLR" is fine and unlikely to cause problems. CERT reports that AMD and ATI video drivers used to crash if you enabled forced ASLR, but their latest drivers have now fixed this problem. They don't show any other drivers with this problem. A forum post from Microsoft shows no other applications with compatibility problems if ASLR is forced on, as of 2011. A user reports that borderlands.exe, a video game by Gearbox Software, crashes if you turn on mandatory ASLR. What else should I know? Is it relatively safe to turn on Force ASLR / Mandatory ASLR systemwide to harden the secuity of my system, or will I be in for a world of pain and broken applications? How significant is the risk of compatibility problems and broken applications?

  Read the article

• Laptop turning off when fan is spinning hard

  - by Ieyasu Sawada

  My laptop seems to have reach its lifespan. Its an Acer laptop so I guess that's normal. But I'd like to hear your opinions about this. My laptop is only 2 years old. I haven't heard the fan spinning like crazy not until these past 5 months. What I did: Hoping that its just the applications that I have installed that's consume the life of my laptop from the background. I used PC Decrapifier to uninstall some of the things that I don't need. Reformatted my computer but only the primary partition since my files are on the second partition. Bought a cooling pad. None of these works. I noticed the fan spins so hard when: I have a lot of browser tabs open. Full screen mode a flash video that I'm viewing online. Using VLC to watch encoded videos. There's this thing called minicoder http://sourceforge.net/projects/minicoder/ to reduce the size of videos without affecting much of the quality. I'm suspecting that it needs additional software(to make life easier for the hardware) even though the video is working fine in VLC. VLC consumes about 300,000K and above(as seen from task manager) while watching videos (.mkv). The problem: Laptop suddenly turns off when the fan spins like crazy for about 20 minutes. I'm always checking to see if its already too hot(using my fingers to feel the side of the laptop) but its not so I continued watching and then poof! computer turns off. Laptop won't turn on immediately when I turn it on after it turning off by itself. The light for the power goes on but its turns off immediately. I have to wait for about 10-20 seconds before it boots up without problems. So how do I go about this? Is this just normal for Acer laptops after about 2 years of heavy usage (8-12 hours a day)? My usage is heavy but I normally only have a text-editor(sublime) and browser open(chrome). Here's what I got from HW monitor:

  Read the article

• Possible capacitor plague - need help identifying

  - by cornjuliox

  I've been having some PC power issues lately, and I think I've tracked it down to a bad power supply. Lately, when I'm on my PC it will often restart without warning, displaying "Hypertransport sync flood error occurred last boot." once POST finishes. I've googled the error, but can't come to a definitive conclusion as to what's causing it. I've seen posts suggesting that it might be a power supply issue, but nothing conclusive. Here's what I've done so far: -I haven't installed anything suspect within the last 3 months. -I do overclock just a tiny bit, so I tried raising the voltages a little. That didn't work so I brought both CPU multiplier and voltages all back to their default settings, but that didn't solve the problem either. The problem still occurs. -AV scanned the whole system, nothing suspect. -I suspected that it might be a bad power supply so I cracked that open and found the following: I think it might be cap plague, but I'm not sure. It looks more like glue TBH. Could someone help me figure out what might be wrong with this PC? EDIT: Sometimes, after these restarts, I noticed that the GPU fan doesn't spin up, and the single rear case fan that just happens to be connected to the same molex Y-cable as the GFX card doesn't spin up either. Anything to that? EDIT 2: I do use the system quite heavily, but I don't know how that will factor into this. I often play Diablo 3 and EVE Online at the same time, frequently alt-tabbing between the two. I also have Firefox open in the background, sometimes with several tabs, and if I feel like it, I'll mute the in-game sound and open foobar2000 for better music. Could it be that I'm just pushing this thing too hard? EDIT 3: I also noticed something odd. Right before I experience these restarts, my monitor would suffer from very faint lines of static moving across the screen. The monitor is still very much useable, but it is very annoying. Following the restart it disappears, and then would gradually re-appear over the next few days, and then restarts again. I find it to be very odd. System specs for good measure: Orion 600 W PSU AMD Athlon II X3 440 (overclocked to 3.14 ghZ, raised the CPU multiplier to x13 from x10) MSI G40-775 motherboard 1 GB inno3D GTX 550 ti 4 GB DDR3 RAM 500 GB Samsung SATA HD

  Read the article

• filtering itunes library items by file location

  - by Cawas

  3 answers and unfortunately no solution yet. The Problem I've got way more than 1000 duplicated items in my iTunes Library pointing to a non-existant place (the "where" under "get info" window), along with other duplicated items and other MIAs (Missing In Action). Is there any simple way to just delete all of them and only them? From the library, of course. By that I mean some MIAs are pointing to /Volumes while some are pointing to .../music/Music/... or just .../music/.... I want to delete all pointing to /Volumes as to later I'll recover the rest. Check the image below. Some Background I tried searching for a specific key word on the path and creating smart play list, but with no result. Being able to just sort all library by path would be a perfect solution! I believe old iTunes could do that. PowerTunes can do it (sort by path) but I can't do anything with its list. I would also welcome any program able to handle this, then import and properly export back the iTunes library. Since this seems to just not be clear enough... AppleScript doesn't work That's because AppleScript just can't gather the missing info anywhere in iTunes Library. Maybe we could use AppleScript by opening the XML file, but that's a whole nother issue. Here's a quote from my conversation with Doug the man himself Adams last december: I don't think you do understand. There is no way to get the path to the file of a dead track because iTunes has "forgotten" it. That is, by definition, what a dead track is. Doug On Dec 21, 2010, at 7:08 AM, Caue Rego wrote: yes I understand that and have seem the script. but I'm not looking for the file. just the old broken path reference to it. Sent from my iPhone On 21/12/2010, at 10:00, Doug Adams wrote: You cannot locate missing files of dead tracks because, by definition, a dead track is one that doesn't have any file information. If you look at "Super Remove Dead Tracks", you will notice it looks for tracks that have "missing value" for the location property.

  Read the article

• Windows startup Powershell script not closing after Start-Process

  - by Matthew Phipps

  I've got a Powershell V2.0 startup script for my work computer (XP Professional 64-bit), as follows: start "C:\Program Files (x86)\Microsoft Office\Office12\OUTLOOK.EXE" -ArgumentList "/recycle" sleep -S 2 start "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -ArgumentList "https://mail.google.com" sleep -S 2 start "C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -ArgumentList "-new-window https://www.google.com/calendar" sleep -S 2 start "C:\Program Files (x86)\Skype\Phone\Skype.exe" The sleeps are to ensure that the windows appear on the taskbar in the correct order. I run this from a shortcut on my Quick Launch with the following Target: C:\WINDOWS\system32\WindowsPowerShell\v1.0\powershell.exe C:\scripts\initialize.ps1 (Yes, this is 2.0: powershell -Version 2.0 works, as does -Version 1.0, but not -Version 3.0) Problem is, the command window stays open until the Firefox windows are closed, which is not what I want. Looking at Process Explorer when I run the script, here's what happens: powershell.exe appears under explorer.exe and the Powershell window appears (with a black background, oddly. But it's not cmd.exe, since when I was debugging the script error messages would appear in red). outlook.exe appears under powershell.exe and the Outlook window appears. firefox.exe appears under powershell.exe and a Firefox window appears. A second firefox.exe appears under powershell.exe and another Firefox window appears. The second Firefox process then exits, as expected, since Firefox only uses one process. skype.exe appears under powershell.exe and the Skype window appears. The powershell.exe process inexplicably sticks around, as does the Powershell window. If I close both Firefox windows, the powershell.exe process exits and the Powershell window closes, and the outlook.exe and skype.exe processes appear under explorer.exe as expected. I suspect this has something to do with Firefox's standard input, output and error: I wouldn't expect Outlook or Skype to ever output anything to the console, but Firefox has command-line options that allow it to do so. I've looked over my about:config's user set values and didn't find anything suspicious. Finally, if I have a firefox.exe instance already running (started from the desktop shortcut) the problem doesn't occur (the powershell.exe process exits as it ought to). So what's going on here? I'm going to try adding -WindowStyle hidden to the shortcut next (gotta close this Firefox to test it), but I want to get to the bottom of this, if only to improve my understanding of how Windows consoles work.

  Read the article

• networked storage for a research group, 10-100 TB

  - by Marc

  this is related to this post: http://serverfault.com/questions/80854/scalable-24-tb-nas-for-research-department but perhaps a little more general. Background: We're a research lab of around 10 people who do a lot of experiments that involve taking pictures at one of several lab setups and then analyzing it an one of several lab computers. Each experiment may produce 2 or 3 GB of data, and we are generating data at the rate of about 10 TB/year. Right now, we are storing the data on a 6-bay netgear readynas pro, but even with 2 TB drive, this only gives us 10 TB of storage. Also, right now we are not backing up at all. Our short term backup plan is to get a second readynas, put it in a different building and mirror the one drive onto the other. Obviously, this is somewhat non-ideal. Our options: 1) We can pay our university $400/ TB /year for "backed up" online storage. We trust them more than we trust us, but not a whole lot. 2) We can continue to buy small NASs and mirror them between offices. One limit, although stupid, is that we don't have an unlimited number of ethernet jacks. 3) We can try to implement our own data storage solution, which is why I'm asking you guys. One thing to consider is that we're a very transient population and none of us are network administration experts. I will probably be here only another year or so, and graduate students, who are here the longest, have a 5-6 year time scale. So nothing can require expert oversight. Our data transfer rates are low - most of the data will just sit on the server waiting for someone to look at it once or twice - so we don't need a really high speed system. Given these contraints, can someone recommend a fairly low-cost, scalable, more or less turn key shared data storage system with backup in a separate physical location. Does such a thing exist or should we just pay the university to take care of it for us? As a second question, our professor just got tenure and is putting together a budget. Here the goal is to ask for as much as you can and hope you get a fraction of it. So the same question, minus the low-cost. Without budget constraints, can you recommend a scalable turn-key backed up storage system. Thanks

  Read the article

• Active Directory Corrupted In Windows Small Business Server 2011 - Server No Longer Domain Controller

  - by ThinkerIV

  I have a rather bad problem with my Windows SBS 2011. First of all, I'll give the background to what caused the problem. I was setting up a new small business server network. I had my job about finished. The server was working great, all the workstations had joined the domain, and I had all my applications and data moved to the server. I thought I was done. But then it happened. I tried adding one more computer to the domain, and to my dismay the computer name was set to the same name as the server. Apparently when a computer joins a domain with the same name as another machine that is already on the domain, it overrides the first one. For normal workstations, this is not a big deal, you just delete the computer from AD and rejoin the original computer to the domain. However, for a server that is the domain controller it is a whole different story. Since the server got overridden in AD, it is no longer the domain controller. The DNS service is not working and all kinds of other services are failing also. So the question is, what are my options? I am embarrassed to admit it, but since this is a new server one thing I did not have setup yet was backup. So I have no backups to work from. I am worried that things are broken enough that I might need to do a reinstall. However, I already have several days worth of configuration into this server, so I would obviously prefer if there was a fix that would prevent me from needing to do a reinstall. All the server components are there and installed correctly, but they are misconfigured (I think it is basically just Active Directory). So I have the feeling that if I did the right thing I could solve the issue without a reinstall. Is there anyway to rerun the component that installs the initial configuration to "convert" the base windows server 2008 r2 install into a SBS? In other words in the program files folder there is an application called SBSsetup.exe, is there anyway to rerun this and have it reconfigure AD, etc. to work with SBS? Any insight will be greatly appreciated. Thanks.

  Read the article

• How to get an inactive RAID device working again?

  - by Jonik

  After booting, my RAID1 device (/dev/md_d0 *) sometimes goes in some funny state and I cannot mount it. * Originally I created /dev/md0 but it has somehow changed itself into /dev/md_d0. # mount /opt mount: wrong fs type, bad option, bad superblock on /dev/md_d0, missing codepage or helper program, or other error (could this be the IDE device where you in fact use ide-scsi so that sr0 or sda or so is needed?) In some cases useful info is found in syslog - try dmesg | tail or so The RAID device appears to be inactive somehow: # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md_d0 : inactive sda4[0](S) 241095104 blocks # mdadm --detail /dev/md_d0 mdadm: md device /dev/md_d0 does not appear to be active. Question is, how to make the device active again (using mdmadm, I presume)? (Other times it's alright (active) after boot, and I can mount it manually without problems. But it still won't mount automatically even though I have it in /etc/fstab: /dev/md_d0 /opt ext4 defaults 0 0 So a bonus question: what should I do to make the RAID device automatically mount at /opt at boot time?) This is an Ubuntu 9.10 workstation. Background info about my RAID setup in this question. Edit: My /etc/mdadm/mdadm.conf looks like this. I've never touched this file, at least by hand. # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR <my mail address> # definitions of existing MD arrays # This file was auto-generated on Wed, 27 Jan 2010 17:14:36 +0200 In /proc/partitions the last entry is md_d0 at least now, after reboot, when the device happens to be active again. (I'm not sure if it would be the same when it's inactive.) Resolution: as Jimmy Hedman suggested, I took the output of mdadm --examine --scan: ARRAY /dev/md0 level=raid1 num-devices=2 UUID=de8fbd92[...] and added it in /etc/mdadm/mdadm.conf, which seems to have fixed the main problem. After changing /etc/fstab to use /dev/md0 again (instead of /dev/md_d0), the RAID device also gets automatically mounted!

  Read the article

• Media Archive System with branches?

  - by Ian McEwen

  In short, how can I get VCS features (revisioning, branching, and deduplication) for a media collection that's far too large for most/all VCS systems? Background I have a 300GB music folder; unfortunately, I only have the hard drive space for this on my desktop system. However, a good portion of my collection is FLAC; therefore, I could theoretically have a space-optimized version in which I transcode all the FLAC to mp3 or some other lossy format, and use only that version on the laptop. However, a portion of my collection isn't FLAC. And that which isn't FLAC shouldn't be transcoded to an equivalent format; it won't have any space savings, which is the point. Moreover, it shouldn't be duplicated: the mp3/ogg portions of the collection should probably be exactly the same files. Thoughts One solution is to have format-specific organization of my music folders, and use some script to transcode the FLAC directory to mp3 or such into another directory. Another is some sort of hack using entirely separate copies and symbolic links for deduplication, or something similar. But these also have a disadvantage of lacking versioning; I'd like to be able to reorganize my music collection, retag things, etc. and save history. This isn't key, but would be awfully nice. I can't see it as entirely unreasonable to set up VCS hooks or something equivalent to keep directory structure synced between two copies, update tags, and transcode FLAC automatically into the space-optimized copy. Basically, the system I really want is a version control system. Two branches: one archival/desktop branch including the FLAC, one space-optimized/laptop branch without it; most VCSes would deal well with whole chunks being the same files well by compressing in a reasonable way (i.e. don't keep two copies of the same data). I could also do a lot of what I talk about above with hooks. But I don't know of any VCS that would deal with a 300GB repository with almost 20k files. Many of them would just not even initialize the whole affair; others would just do it inexpressibly slowly or otherwise badly. checkpoint looks like it's designed for something close (it's at least for media), but wouldn't do deduplication well (and I'm not convinced I'd be able to script it to do things like automatic transcoding and directory-structure syncing). So. Is there anything out there that can do all this, or should I consider it a programming project?

  Read the article

• Adaptec 5805 not recognized after reboot

  - by Rakedko ShotGuns

  After rebooting the system, the controller is not recognized. It only works if the computer is shut down and turned off. I have recently updated the firmware to "Adaptec RAID 5805 Firmware Build 18948". How do I fix the problem? Configuration summary --------------------------- 1. Server name.....................raid_test Adaptec Storage Manager agent...7.31.00 (18856) Adaptec Storage Manager console.7.31.00 (18856) Number of controllers...........1 Operating system................Windows Configuration information for controller 1 ------------------------------------------------------- Type............................Controller Model...........................Adaptec 5805 Controller number...............1 Physical slot...................2 Installed memory size...........512 MB Serial number...................8C4510C6C9E Boot ROM........................5.2-0 (18948) Firmware........................5.2-0 (18948) Device driver...................5.2-0 (16119) Controller status...............Optimal Battery status..................Charging Battery temperature.............Normal Battery charge amount (%).......37 Estimated charge remaining......0 days, 16 hours, 12 minutes Background consistency check....Disabled Copy back.......................Disabled Controller temperature..........Normal (40C / 104F) Default logical drive task priority High Performance mode................Dynamic Number of logical devices.......1 Number of hot-spare drives......0 Number of ready drives..........0 Number of drive(s) assigned to MaxCache cache0 Maximum drives allowed for MaxCache cache8 MaxCache Read Cache Pool Size...0 GB NCQ status......................Enabled Stay awake status...............Disabled Internal drive spinup limit.....0 External drive spinup limit.....0 Phy 0...........................No device attached Phy 1...........................No device attached Phy 2...........................No device attached Phy 3...........................1.50 Gb/s Phy 4...........................No device attached Phy 5...........................No device attached Phy 6...........................No device attached Phy 7...........................No device attached Statistics version..............2.0 SSD Cache size..................0 Pages on fetch list.............0 Fetch list candidates...........0 Candidate replacements..........0 69319...........................31293 Logical device..................0 Logical device name............. RAID level......................Simple volume Data space......................148,916 GB Date created....................09/19/2012 Interface type..................Serial ATA State...........................Optimal Read-cache mode.................Enabled Preferred MaxCache read cache settingEnabled Actual MaxCache read cache setting Disabled Write-cache mode................Enabled (write-back) Write-cache setting.............Enabled (write-back) Partitioned.....................Yes Protected by hot spare..........No Bootable........................Yes Bad stripes.....................No Power Status....................Disabled Power State.....................Active Reduce RPM timer................Never Power off timer.................Never Verify timer....................Never Segment 0.......................Present: controller 1, connector 0, device 0, S/N 9RX3KZMT Overall host IOs................99075 Overall MB......................4411203 DRAM cache hits.................71929 SSD cache hits..................0 Uncached IOs....................29239 Overall disk failures...........0 DRAM cache full hits............71929 DRAM cache fetch / flush wait...0 DRAM cache hybrid reads.........3476 DRAM cache flushes..............-- Read hits.......................0 Write hits......................0 Valid Pages.....................0 Updates on writes...............0 Invalidations by large writes...0 Invalidations by R/W balance....0 Invalidations by replacement....0 Invalidations by other..........0 Page Fetches....................0 0...............................0 73..............................10822 8...............................3 46138...........................4916 27184...........................15226 20875...........................323 16982...........................1771 1563............................5317 1948............................2969 Serial attached SCSI ----------------------- Type............................Disk drive Vendor..........................Unknown Model...........................ST3160815AS Serial Number...................9RX3KZMT Firmware level..................3.AAD Reported channel................0 Reported SCSI device ID.........0 Interface type..................Serial ATA Size............................149,05 GB Negotiated transfer speed.......1.50 Gb/s State...........................Optimal S.M.A.R.T. error................No Write-cache mode................Write back Hardware errors.................0 Medium errors...................0 Parity errors...................0 Link failures...................0 Aborted commands................0 S.M.A.R.T. warnings.............0 Solid-state disk (non-spinning).false MaxCache cache capable..........false MaxCache cache assigned.........false NCQ status......................Enabled Phy 0...........................1.50 Gb/s Power State.....................Full rpm Supported power states..........Full rpm, Powered off 0x01............................113 0x03............................98 0x04............................99 0x05............................100 0x07............................83 0x09............................75 0x0A............................100 0x0C............................99 0xBB............................100 0xBD............................100 0xBE............................61 0xC2............................39 0xC3............................69 0xC5............................100 0xC6............................100 0xC7............................200 0xC8............................100 0xCA............................100 Aborted commands................0 Link failures...................0 Medium errors...................0 Parity errors...................0 Hardware errors.................0 SMART errors....................0 End of the configuration information for controller 1

  Read the article

• Event ID 17890 (A significant part... paged out.) with SQL Server 2008

  - by Godeke

  I have a machine that has SQL Server 2008 Standard installed. Periodically (about once an hour) I am getting Event ID 17890 several times in a row. An example: 6:28:54 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 0 seconds. Working set (KB): 10652, committed (KB): 628428, memory utilization: 1%%. 6:34:27 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 332 seconds. Working set (KB): 169780, committed (KB): 546124, memory utilization: 31%%." 6:38:55 "A significant part of sql server process memory has been paged out. This may result in a performance degradation. Duration: 600 seconds. Working set (KB): 245068, committed (KB): 546124, memory utilization: 44%%." This pattern repeated at 7:26 - 7:37, 8:26 - 8:36, 9:24 - 9:35 and so with the same increasing working set and memory utilization pattern. I don't have any (known) background tasks running at this time. Backups run at 2:00 This subsided from 11:00 at night until it resumed at 4:00 in the morning and has been continuing the intermittent 10 minute glitch periods. As this server has plenty of RAM (the commit charge has peaked at 2,871,564 of 4,194,012 physical) I disabled the paging files after reading several items I dug up searching Google and not finding any of them changing the situation. This pattern I am documented is after removing the paging files, so I'm not even sure where we are paging the SQL process could be going. I also changed the SQL process memory to have a minimum of 500MB and a maximum of 2GB of RAM (as this is a light duty database server serving only a small workgroup). Has anyone encountered this? Prior to disabling the page files this error would cause 5 minutes of disk thrashing that disabled access to the databases, files, IIS webs and so on. Since disabling the page files it just logs strange things, but I'm not seeing a performance drop at least. Any suggestions would be welcome.

  Read the article

• MegaCli newly created disk doesn't appear under /dev/sdX

  - by Henry-Nicolas Tourneur

  After having successfully added 2 new disks in a new RAID virtual drive (background initialization done), I would have exepected it to appear under /dev/sdh but it's not there (so, unusable). The system is running a CentOS 5.2 64 bits, HAL and udev daemons are running, not records of any sdh apparition under the messsage log file or in dmesg, only MegaCli do see that virtual drive. Any idea ? Some data: [root@server ~]# ./MegaCli -LDInfo -LALL -a0 Adapter 0 -- Virtual Drive Information: Virtual Disk: 0 (target id: 0) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:139392MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Virtual Disk: 1 (target id: 1) Name: RAID Level: Primary-1, Secondary-0, RAID Level Qualifier-0 Size:285568MB State: Optimal Stripe Size: 64kB Number Of Drives:2 Span Depth:1 Default Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteBack, ReadAheadNone, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default [root@server ~]# ls -l /dev/disk/by-id/scsi-360* lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09 -> ../../sda lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part1 -> ../../sda1 lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36001ec90f82fe100108ca0a704098d09-part2 -> ../../sda2 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee -> ../../sdf lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe07e78f94940c0000a0ee-part1 -> ../../sdf1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f -> ../../sdb lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fe972a3f91240a0000005f-part1 -> ../../sdb1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec -> ../../sde lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fea7e18f94640c000020ec-part1 -> ../../sde1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d -> ../../sdd lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0feb7da8f94340c0000203d-part1 -> ../../sdd1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7 -> ../../sdc lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a028e0fed7d78f94040c000080b7-part1 -> ../../sdc1 lrwxrwxrwx 1 root root 9 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1 -> ../../sdg lrwxrwxrwx 1 root root 10 Nov 17 2010 /dev/disk/by-id/scsi-36090a05830145e58e0b9c479000010a1-part1 -> ../../sdg1

  Read the article

• Sony VGN-NR260E "External Device Boot"

  - by user72158

  [A LITTLE BACKGROUND] On all modern Dell computers pushing the F12 on bios boot will allow for a screen that lets you choose what boot option you need. For example if I want to boot off of a USB flash drive to boot into a live Linux distribution in order to clean virus's on netbooks that do not have CD drives to boot from I would push F12 and choose USB device from the list of options. If this does not show up then I can always go to the F2 bios setup and choose flash drive to be the first option. When I restart the computer it will boot into the flash device. I understand that I can purchase an external USB CD drive and then boot from that. I do not want to use that option. The reason for using a flash device instead of a CD is: A: This USB flash device has several different boot OS's on it that are used. B: The antivirus disks are updated often and burning cd's and throwing away others is wasteful compared to simply updating a flash drive. There is nothing wrong with the flash drive. It works perfect on many other PC's. [PROBLEM] Booting this flashdrive has been working for years on hundreds of computers... I just have this ONE computer that I cannot figure out how to get it to boot on... I have a Sony Vaio that will not boot to this device. I've tried pushing every key combo I can think of (F12, Esc, Del, F10...) and none of these key combinations will bring up the boot menu. I chose F2 and went into the bios and changed the first boot device to USB flash device. This did not work either. There is an astrix next to the device and the note states: "This Drive is available when External Device Boot is Enable." [WHAT I NEED] I need to know How to enable External Device Boot on the Sony Vaio VGN-NR260E laptop. OR How to bring up the Boot Menu to allow me to boot off a flash device. Thanks for anyone that can help!

  Read the article

< Previous Page | 396 397 398 399 400 401 402 403 404 405 406 407  | Next Page >