Search Results

Search found 16237 results on 650 pages for 'lock free'.

Page 404/650 | < Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >

• PASS: SQLRally Thoughts

  - by Bill Graziano

  The PASS Board recently decided that we wouldn’t put another US-based SQLRally on the calendar until we had a chance to review the program. I wanted to provide some of my thinking around this. Keep in mind that this is the opinion of one Board member. The Board committed to complete two SQLRally events to determine if an event modeled between SQL Saturday and the Summit was viable. We’ve completed the two events and now it’s time to step back and review the program. This is my seventh year on the PASS Board. Over that time people have asked me why PASS does certain things. Many, many times my answer has been “Because that’s the way we did it last year”. And I am tired of giving that answer. We need to take a step back and review the US-based SQLRally before we schedule another one. It would be irresponsible for me as a Board member to commit resources to this without validating that what we’re doing makes sense for the organization and our members. I have no doubt that this was a great event for the attendees. We just need to validate it’s the best use of our resources. Please keep in mind that we haven’t cancelled the event. We’ve just said we need to review it before scheduling another one. My opinion is that some fairly serious changes are needed to the model before we consider it again – IF we do it again. I’ve come to that conclusion after speaking with the Dallas organizers, our HQ team, our Marketing team, other Board members (including one of the Orlando organizers), attendees in Orlando and Dallas and visiting other similar events. I should point out that their views aren’t unanimous on nearly any part of this event -- which is one of the reasons I want to take some time and think about this before continuing. I think it’s helpful to look at the original goals of what we were trying to accomplish. Andy Warren wrote these up in August of 2010. My summary of these goals and some thoughts on each one is below. Many of these thoughts revolve around the growth of SQL Saturdays. In the two years since that document was written these events have grown significantly. The largest SQL Saturdays are now over 500 people which mean they are nearly the same size as our recent SQLRally. Our goals included: Geographic diversity. We wanted an event in an area of the country that was away from any given Summit location. I think that’s still a valid goal. But we also have SQL Saturdays all over the country. What does SQLRally bring to this that SQLSaturday doesn’t? Speaker growth. One of the stated goals was to build a “farm club” for speakers. This gives us a way for speakers to work up to speaking at Summit by speaking in front of larger crowds. What does SQLRally bring to this that the larger SQL Saturdays aren’t providing? Pre-Conference speakers is one obvious answer here. Lower price. On a per-day basis, SQLRally is roughly 1/4th the price of the Summit. We wanted a way for people to experience something Summit-like at a lower price point. The challenge is that we are very budget constrained at that lower price point. International Event Model.  (I need to write more about this but I’m out of time.  I’ll cover it in the next installment.) There are a number of things I really like about SQLRally. I love the smaller conferences. They give me a chance to meet more people than at something the size of Summit. I like the two day format. That gives you two evenings to be at social events with people. Seeing someone a second day is a great way to build a bond with that person. That’s more difficult to do at a SQL Saturday. We also need to talk about the financial aspects of the event. Last year generated a small $17,000 profit on revenues of $200,000. Percentage-wise that’s reasonable but on an absolute basis it’s not a huge amount in our budget. We think this year will lose between $30,000 and $50,000 and take roughly 1,000 hours of HQ time. We don’t have detailed financials back yet but that’s our best guess at this point. Part of that was driven by using a convention center instead of a hotel. Until we get detailed financials back we won’t have the full picture around the financial impact. This event also takes time and mindshare from our Marketing team. This may sound like a small thing but please don’t underestimate it. Our original vision for this was something that would take very little time from our Marketing team and just a few mentions in the Connector. It turned out to need more than that. And all those mentions and emails take up space we could use to talk about other events and other programs. Last I wanted to talk about some of the things I’m thinking about. I don’t think it’s as simple as saying if we just fix “X” it all gets better. Is this that much better of an event than SQL Saturdays? What if we gave a few SQL Saturdays some extra resources? When SQL Saturdays were around 250 people that wasn’t as viable. With some of those events over 500 we need to reconsider this. We need to get back to a hotel venue. That will help with cost and networking. Is this the best use of the 1,000 HQ hours that we invested in the event? Is our price-point correct? I’m leaning toward raising our price closer to Summit on a per-day basis. I think this will let us put on a higher quality event and alleviate much of the budget pressure. Should growing speakers be a focus? Having top-line pre-conference speakers helps market the event. It will also have an impact on pricing and overall profit. We should also ask if it actually does grow speakers. How many of these people will eventually register for Summit? Attend chapters? Is SQLRally a driver into PASS or is it something that chapters, etc. drive people to? Should we have one paid day and one free instead of two paid days? This is a very interesting model that is used by SQLBits in the UK. This gives you the two day aspect as well as offering options for paid and free attendees. I’m very intrigued by this. Should we focus on a topic? Buried in the minutes is a discussion of whether PASS should have a Business Analytics conference separate from Summit. This is an interesting question to consider. Would making SQLRally be focused on a particular topic make it more attractive? Would that even be a SQLRally? Can PASS effectively manage the two events? (FYI - Probably not.) Would it help differentiate it from Summit and SQL Saturday? These are all questions that I think should be asked and answered before we do this event again. And we can’t do that if we don’t take time to have the discussion. I wanted to get this published before I take off for a few days of vacation. When I get back I’d like to write more about why the international events are different and talk about where we go from here.

  Read the article

• Azure Task Scheduling Options

  - by charlie.mott

  Currently, the Azure PaaS does not offer a distributed\resilient task scheduling service.  If you do want to host a task scheduling product\solution off-premise (and ideally use Azure), what are your options? PaaS Option 1: Worker Roles Use a worker role to schedule and execute actions at specific time periods.  There are a few frameworks available to assist with this: http://azuretoolkit.codeplex.com https://github.com/Lokad/lokad-cloud/wiki/TaskScheduler http://blog.smarx.com/posts/building-a-task-scheduler-in-windows-azure - This addresses a slightly different set of requirements. It’s a more dynamic approach for queuing up tasks, but not repeatable tasks (e.g. daily). I found the Azure Toolkit option the most simple to implement.  Step 1 : Create a domain entity implementing IJob for each job to schedule.  In this sample, I asynchronously call a WCF service method. 1: namespace Acme.WorkerRole.Jobs 2: { 3: using AzureToolkit; 4: using ScheduledTasksService; 5: 6: public class UploadEmployeesJob : IJob 7: { 8: public void Run() 9: { 10: // Call Tasks Service 11: var client = new ScheduledTasksServiceClient("BasicHttpBinding_IScheduledTasksService"); 12: client.UploadEmployees(); 13: client.Close(); 14: } 15: } 16: } Step 2 : In the worker role run method, add the jobs to the toolkit engine. 1: namespace Acme.WorkerRole 2: { 3: using AzureToolkit.Engine; 4: using Jobs; 5:   6: public class WorkerRole : WorkerRoleEntryPoint 7: { 8: public override void Run() 9: { 10: var engine = new CloudEngine(); 11:   12: // Add Scheduled Jobs (using CronJob syntax - see http://www.adminschoice.com/crontab-quick-reference). 13:   14: // 1. Upload Employee job - 8.00 PM every weekday (Mon-Fri) 15: engine.WithJobScheduler().ScheduleJob<UploadEmployeesJob>(c => { c.CronSchedule = "0 20 * * 1-5"; }); 16: // 2. Purge Data job - 10 AM every Saturday 17: engine.WithJobScheduler().ScheduleJob<PurgeDataJob>(c => { c.CronSchedule = "0 10 * * 6"; }); 18: // 3. Process Exceptions job - Every 5 minutes 19: engine.WithJobScheduler().ScheduleJob<ProcessExceptionsJob>(c => { c.CronSchedule = "*/5 * * * *"; }); 20:   21: engine.Run(); 22: base.Run(); 23: } 24: } 25: } Pros Cons Azure Toolkit option is simple to implement. For the AzureToolkit option, you are limited to a single worker role.  Otherwise, the jobs will be executed multiple times, once for each worker role instance.   Paying for a continuously running worker role, even if it just processes a single job once a week.  If you only have a few scheduled tasks to run calling asynchronous services hosted in different web roles, an extra small worker role likely to be sufficient.  However, for an extra small worker role this still costs $14.40/month (03/09/2012). Option 2: Use Scheduled Task on Azure Web Role calling a console app Setup a Windows Scheduled Task on the Azure Web Role. This calls a console application that calls the WCF service methods that run the task actions. This design is described here: http://www.ronaldwidha.net/2011/02/23/cron-job-on-azure-using-scheduled-task-on-a-web-role-to-replace-azure-worker-role-for-background-job/ http://www.voiceoftech.com/swhitley/index.php/2011/07/windows-azure-task-scheduler/ http://devlicio.us/blogs/vinull/archive/2011/10/23/moving-to-azure-worker-roles-for-nothing-and-tasks-for-free.aspx Pros Cons Fairly easy to implement. Supportability - I RDC’ed onto the Azure server and stopped the scheduled task. I then rebooted the machine and the task was re-started. I also tried deleting the task and rebooting, the same thing occurred. The only way to permanently guarantee that a task is disabled is to do a fresh deployment. I think this is a major supportability concern.   Saleability - multiple instances would trigger multiple tasks. You can only have one instance for the scheduled task web role. The guidance implements setup of the scheduled task as part of a web role instance. But if you have more than one instance in a web role, the task will be triggered multiple times for each scheduled action (once per machine). Workaround: If we wanted to use scheduled tasks for another client with a saleable WCF service, then we could include the console & tasks scripts in a separate web role (e.g. a empty WCF service with no real purpose to it). SaaS Option 3: Azure Marketplace I thought that someone might be offering this type of service via the Azure marketplace. At the point of writing this blog post, I did not find anyone doing so. https://datamarket.azure.com/ Pros Cons   Nobody currently offers this on the Azure Marketplace. Option 4: Online Job Scheduling Service Provider There are plenty of online providers that offer this type of service on a pay-as-you-go approach.  Some of these are free for small usage.   Many of these providers are listed here: http://en.wikipedia.org/wiki/Webcron Pros Cons No bespoke development for scheduler. Reliance on third party. IaaS Option 5: Setup Scheduling Software on Azure IaaS VM’s One of job scheduling software offerings could be installed and configured on Azure VM’s.  A list of software options is listed here: http://en.wikipedia.org/wiki/List_of_job_scheduler_software Pros Cons Enterprise distributed\resilient task scheduling service VM Setup and maintenance   Software Licence Costs Option 6: VM Gallery A the time of writing this blog post, I did not spot a VM in the gallery that included pre-installation of any of the above software options. Pros Cons   No current VM template. Summary For my current project that had a small handful of tasks to schedule with a limited project budget I chose option 1 (a worker role using the Azure Toolkit to schedule tasks).  If I was building an enterprise scale solution for the future, options 4 and 5 are currently worthy of consideration. Hopefully, Microsoft will include tasks scheduling in the future as part of their PaaS offerings.

  Read the article

• Finding nuggets in ARC discussions

  - by alanc

  A bit over twenty years ago, Sun formed an Architecture Review Committee (ARC) that evaluates proposals to change interfaces between components in Sun software products. During the OpenSolaris days, we opened many of these discussions to the community. While they’re back behind closed doors, and at a different company now, we still continue to hold these reviews for the software from what’s now the Sun Systems Group division of Oracle. Recently one of these reviews was held (via e-mail discussion) to review a proposal to update our GNU findutils package to the latest upstream release. One of the upstream changes discussed was the addition of an “oldfind” program. In findutils 4.3, find was modified to use the fts() function to walk the directory tree, and oldfind was created to provide the old mechanism in case there were bugs in the new implementation that users needed to workaround. In Solaris 11 though, we still ship the find descended from SVR4 as /usr/bin/find and the GNU find is available as either /usr/bin/gfind or /usr/gnu/bin/find. This raised the discussion of if we should add oldfind, and if so what should we call it. Normally our policy is to only add the g* names for GNU commands that conflict with an existing Solaris command – for instance, we ship /usr/bin/emacs, not /usr/bin/gemacs. In this case however, that seemed like it would be more confusing to have /usr/bin/oldfind be the older version of /usr/bin/gfind not of /usr/bin/find. Thus if we shipped it, it would make more sense to call it /usr/bin/goldfind, which several ARC members noted read more naturally as “gold find” than as “g old find”. One of the concerns we often discuss in ARC is if a change is likely to be understood by users or if it will result in more calls to support. As we hit this part of the discussion on a Friday at the end of a long week, I couldn’t resist putting forth a hypothetical support call for this command: “Hello, Oracle Solaris Support, how may I help you?” “My admin is out sick, but he sent an email that he put the findutils package on our server, and I can run goldfind now. I tried it, but goldfind didn’t find gold.” “Did he get the binutils package too?” “No he just said findutils, do we need binutils?” “Well, gold comes in the binutils package, so goldfind would be able to find gold if you got that package.” “How much does Oracle charge for that package?” “It’s free for Solaris users.” “You mean Oracle ships packages of gold to customers for free?” “Yes, if you get the binutils package, it includes GNU gold.” “New gold? Is that some sort of alchemy, turning stuff into gold?” “Not new gold, gold from the GNU project.” “Oracle’s taking gold from the GNU project and shipping it to me?” “Yes, if you get binutils, that package includes gold along with the other tools from the GNU project.” “And GNU doesn’t mind Oracle taking their gold and giving it to customers?” “No, GNU is a non-profit whose goal is to share their software.” “Sharing software sure, but gold? Where does a non-profit like GNU get gold anyway?” “Oh, Google donated it to them.” “Ah! So Oracle will give me the gold that GNU got from Google!” “Yes, if you get the package from us.” “How do I get the package with the gold?” “Just run pkg install binutils and it will put it on your disk.” “We’ve got multiple disks here - which one will it put it on?” “The one with the system image - do you know which one that is? “Well the note from the admin says the system is on the first disk and the users are on the second disk.” “Okay, so it should go on the first disk then.” “And where will I find the gold?” “It will be in the /usr/bin directory.” “In the user’s bin? So thats on the second disk?” “No, it would be on the system disk, with the other development tools, like make, as, and what.” “So what’s on the first disk?” “Well if the system image is there the commands should all be there.” “All the commands? Not just what?” “Right, all the commands that come with the OS, like the shell, ps, and who.” “So who’s on the first disk too?” “Yes. Did your admin say when he’d be back?” “No, just that he had a massive headache and was going home after I tried to get him to explain this stuff to me.” “I can’t imagine why.” “Oh, is why a command too?” “No, _why was a Ruby programmer.” “Ruby? Do you give those away with the gold too?” “Yes, but it comes in the ruby package, not binutils.” “Oh, I’ll have to have my admin get that package too! Thanks!” Needless to say, we decided this might not be the best idea. Since the GNU package hasn’t had to release a serious bug fix in the new find in the past few years, the new GNU find seems pretty stable, and we always have the SVR4 find to use as a fallback in Solaris, so it didn’t seem that adding oldfind was really necessary, so we passed on including it when we update to the new findutils release. [Apologies to Abbott, Costello, their fans, and everyone who read this far. The Gold (linker) page on Wikipedia may explain some of the above, but can’t explain why goldfind is the old GNU find, but gold is the new GNU ld.]

  Read the article

• CodePlex Daily Summary for Wednesday, September 05, 2012

  CodePlex Daily Summary for Wednesday, September 05, 2012Popular ReleasesDesktop Google Reader: 1.4.6: Sorting feeds alphabetical is now optional (see preferences window)DotNetNuke® Community Edition CMS: 06.02.03: Major Highlights Fixed issue where mailto: links were not working when sending bulk email Fixed issue where uses did not see friendship relationships Problem is in 6.2, which does not show in the Versions Affected list above. Fixed the issue with cascade deletes in comments in CoreMessaging_Notification Fixed UI issue when using a date fields as a required profile property during user registration Fixed error when running the product in debug mode Fixed visibility issue when...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.65: Fixed null-reference error in the build task constructor.BLACK ORANGE: HPAD TEXT EDITOR 0.9 Beta: HOW TO RUN THE TEXT EDITOR Download the HPAD ARCHIVED FILES which is in .rar format Extract using Winrar Make sure that extracted files are in the same folder Double-Click on HPAD.exe application fileTelerikMvcGridCustomBindingHelper: Version 1.0.15.247-RC2: TelerikMvcGridCustomBindingHelper 1.0.15.247 RC2 Release notes: This is a RC version (hopefully the last one), please test and report any error or problem you encounter. This release is all about performance and fixes Support: "Or" and "Does Not contain" filter options Improved BooleanSubstitutes, Custom Aggregates and expressions-to-queryover Add EntityFramework examples in ExampleWebApplication Many other improvements and fixes Fix invalid cast on CustomAggregates Support for ...ServiceMon - Extensible Real-time, Service Monitoring Utility: ServiceMon Release 0.9.0.44: Auto-uploaded from build serverJavaScript Grid: Release 09-05-2012: Release 09-05-2012xUnit.net Contrib: xunitcontrib-dotCover 0.6.1 (dotCover 2.1 beta): xunitcontrib release 0.6.1 for dotCover 2.1 beta This release provides a test runner plugin for dotCover 2.1 beta, targetting all versions of xUnit.net. (See the xUnit.net project to download xUnit.net itself.) This release adds support for running xUnit.net tests to dotCover 2.1 beta's Visual Studio plugin. PLEASE NOTE: You do NOT need this if you also have ReSharper and the existing 0.6.1 release installed. DotCover will use ReSharper's test runners if available. This release includes th...B INI Sharp Library: B INI Sharp Library v1.0.0.0 Realsed: The frist realsedActive Forums for DotNetNuke CMS: Active Forums 5.0.0 RC: RC release of Active Forums 5.0.Droid Explorer: Droid Explorer 0.8.8.7 Beta: Bug in the display icon for apk's, will fix with next release Added fallback icon if unable to get the image/icon from the Cloud Service Removed some stale plugins that were either out dated or incomplete. Added handler for *.ab files for restoring backups Added plugin to create device backups Backups stored in %USERPROFILE%\Android Backups\%DEVICE_ID%\ Added custom folder icon for the android backups directory better error handling for installing an apk bug fixes for the Runn...BI System Monitor: v2.1: Data Audits report and supporting SQL, and SSIS package Environment Overview report enhancements, improving the appearance, addition of data audit finding indicators Note: SQL 2012 version coming soon.The Visual Guide for Building Team Foundation Server 2012 Environments: Version 1: --Nearforums - ASP.NET MVC forum engine: Nearforums v8.5: Version 8.5 of Nearforums, the ASP.NET MVC Forum Engine. New features include: Built-in search engine using Lucene.NET Flood control improvements Notifications improvements: sync option and mail body View Roadmap for more details webdeploy package sha1 checksum: 961aff884a9187b6e8a86d68913cdd31f8deaf83WiX Toolset: WiX Toolset v3.6: WiX Toolset v3.6 introduces the Burn bootstrapper/chaining engine and support for Visual Studio 2012 and .NET Framework 4.5. Other minor functionality includes: WixDependencyExtension supports dependency checking among MSI packages. WixFirewallExtension supports more features of Windows Firewall. WixTagExtension supports Software Id Tagging. WixUtilExtension now supports recursive directory deletion. Melt simplifies pure-WiX patching by extracting .msi package content and updating .w...Iveely Search Engine: Iveely Search Engine （0.2.0）: ????ISE?0.1.0??，?????，ISE?0.2.0?????????，???????，????????20???follow?ISE，????，??ISE??????????，??????????，?????????，?????????0.2.0??????，??????????。 Iveely Search Engine ?0.2.0?????????“??????????”，??????，?????????，???????，???????????????????，????、????????????。???0.1.0????????????： 1. ??“????” ??。??????????，?????????，???????????????????。??：????????，????????????，??????????????????。??????。 2. ??“????”??。?0.1.0??????，???????，???????????????，?????????????，????????，?0.2.0?，???????...GmailDefaultMaker: GmailDefaultMaker 3.0.0.2: Add QQ Mail BugfixSmart Data Access layer: Smart Data access Layer Ver 3: In this version support executing inline query is added. Check Documentation section for detail.DotNetNuke® Form and List: 06.00.04: DotNetNuke Form and List 06.00.04 Don't forget to backup your installation before upgrade. Changes in 06.00.04 Fix: Sql Scripts for 6.003 missed object qualifiers within stored procedures Fix: added missing resource "cmdCancel.Text" in form.ascx.resx Changes in 06.00.03 Fix: MakeThumbnail was broken if the application pool was configured to .Net 4 Change: Data is now stored in nvarchar(max) instead of ntext Changes in 06.00.02 The scripts are now compatible with SQL Azure, tested in a ne...Coevery - Free CRM: Coevery 1.0.0.24: Add a sample database, and installation instructions.New ProjectsA Simple Eng-Hindi CMS: A simple English- Hindi dual language content management system for small business/personal websites.Active Social Migrator: This project for managing the Active Social migration tool.ANSI Console User Control: Custom console control for .NET WinformsAutoSPInstallerGUI: GUI Configuration Tool for SPAutoInstaller Codeplex ProjectCode Documentation Checkin Policy: This checkin policy for Visual Studio 2012 checks if c# code is documented the way it's configured in the config of the policy. Code Dojo/Kata - Free Time Coding: Doing some katas of the Coding Dojo page. http://codingdojo.org/cgi-bin/wiki.pl?KataCataloguefjycUnifyShow: fjycUnifyShowHidden Capture (HC): HC is simple and easy utility to hidden and auto capture desktop or active windowHRC Integration Services: Fake SQL Server Integration Services. LOLKooboo CMS Sites Switcher: Kooboo CMS Sites SwitcherMod.CookieDetector: Orchard module for detecting whether cookies are enabledMyCodes: Created!MySQL Statement Monitor: MySQL Statement Monitor is a monitoring tool that monitors SQL statements transferred over the network.NeoModulusPIRandom: The idea with PI Random is to use easy string manipulation and simple math to generate a pseudo random number. Net Core Tech - Medical Record System: This is a Medical Record System ProjectOraPowerShell: PowerShell library for backup and maintenance of a Oracle Database environment under Microsoft Windows 2008PinDNN: PinDNN is a module that imparts Pinterest-like functionality to DotNetNuke sites. This module works with a MongoDB database and uses the built-in social relatioPyrogen Code Generator: PyroGen is a simple code generator accepting C# as the markup language.restMs: wil be deleted soonScript.NET: Script.NET is a script management utility for web forms and MVC, using ScriptJS-like features to link dependencies between scripts.SpringExample-Pagination: Simple Spring example with PaginationXNA and Component Based Design: This project includes code for XNA and Component Based Design

  Read the article

• Nginx1.6.1: Installing from source not running corectly

  - by Maca

  I just installed Nginx 1.6.1 from source but it didn't seem to installed correctly. Nginx is running if I service nginx status but when I do nginx -v it outputs command not found. Regular HTML page shows fine and there is no error in the error logs. I am on AWS Ec2 linux AMI. Here is my /etc/init.d/nginx script #!/bin/sh # # nginx - this script starts and stops the nginx daemon # # chkconfig: - 85 15 # description: Nginx is an HTTP(S) server, HTTP(S) reverse \ # proxy and IMAP/POP3 proxy server # processname: nginx # config: /etc/nginx/nginx.conf # config: /etc/sysconfig/nginx # pidfile: /usr/local/nginx/logs/nginx.pid # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network # Check that networking is up. [ "$NETWORKING" = "no" ] && exit 0 nginx="/usr/local/nginx/sbin/nginx" prog=$(basename $nginx) NGINX_CONF_FILE="/usr/local/nginx/conf/nginx.conf" [ -f /etc/sysconfig/nginx ] && . /etc/sysconfig/nginx lockfile=/usr/local/nginx/logs/nginx.lock make_dirs() { # make required directories user=`nginx -V 2>&1 | grep "configure arguments:" | sed 's/[^*]*--user=\([^ ]*\).*/\1/g' -` options=`$nginx -V 2>&1 | grep 'configure arguments:'` for opt in $options; do if [ `echo $opt | grep '.*-temp-path'` ]; then value=`echo $opt | cut -d "=" -f 2` if [ ! -d "$value" ]; then # echo "creating" $value mkdir -p $value && chown -R $user $value fi fi done } start() { [ -x $nginx ] || exit 5 [ -f $NGINX_CONF_FILE ] || exit 6 make_dirs echo -n $"Starting $prog: " daemon $nginx -c $NGINX_CONF_FILE retval=$? echo [ $retval -eq 0 ] && touch $lockfile return $retval } stop() { echo -n $"Stopping $prog: " killproc $prog -QUIT retval=$? echo [ $retval -eq 0 ] && rm -f $lockfile return $retval } restart() { configtest || return $? stop sleep 1 start } reload() { configtest || return $? echo -n $"Reloading $prog: " killproc $nginx -HUP RETVAL=$? echo } force_reload() { restart } configtest() { $nginx -t -c $NGINX_CONF_FILE } rh_status() { status $prog } rh_status_q() { rh_status >/dev/null 2>&1 } case "$1" in start) rh_status_q && exit 0 $1 ;; stop) rh_status_q || exit 0 $1 ;; restart|configtest) $1 ;; reload) rh_status_q || exit 7 $1 ;; force-reload) force_reload ;; status) rh_status ;; condrestart|try-restart) rh_status_q || exit 0 ;; *) echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}" exit 2 esac

  Read the article

• Problem interfacing GSM USB modem to Java application

  - by varun

  I am working on an open-source application called FrontlineSMS which can be interfaced with GSM modems to send and receive SMS. The windows installer that is available through their website works fine. Since i wanted to modify it, I got the source code and built the jar and tried to launch it. When I plug in the GSM modem and launch the application, it sometimes detects the GSM device and i am even able to send and receive SMS. Or else 1.) I get the following error- Launching FrontlineSMS for Windows... Stable Library ========================================= Native lib Version = RXTX-2.1-7 Java lib Version = RXTX-2.1-7 Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x5 at /home/bob/foo/rxtx-devel/build/../src/termios.c(860): Access is de ied. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x57 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2352): The parame er is incorrect. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. Error 0x1 at /home/bob/foo/rxtx-devel/build/../src/termios.c(2497): Incorrect f nction. 2.) OR the application sometimes crashes by creating a log file which contains: # # A fatal error has been detected by the Java Runtime Environment: # # EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x10009ccb, pid=4452, tid=3464 # # JRE version: 6.0_20-b02 # Java VM: Java HotSpot(TM) Client VM (16.3-b01 mixed mode, sharing windows-x86 ) # Problematic frame: # C [rxtxSerial.dll+0x9ccb] # # If you would like to submit a bug report, please visit: # http://java.sun.com/webapps/bugreport/crash.jsp # The crash happened outside the Java Virtual Machine in native code. # See problematic frame for where to report the bug. # --------------- T H R E A D --------------- Current thread (0x03433000): JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] siginfo: ExceptionCode=0xc0000005, writing address 0x038cfa10 Registers: EAX=0x038cfa08, EBX=0x00000003, ECX=0x7c802413, EDX=0x00000001 ESP=0x070ef800, EBP=0x070ef9e8, ESI=0x3360b898, EDI=0x03433000 EIP=0x10009ccb, EFLAGS=0x00010202 Top of Stack: (sp=0x070ef800) 0x070ef800: 3360b8a0 6d9fbc40 6da2ed98 ffffffff 0x070ef810: 070ef848 6d8f0a2c 6d8f0340 070ef95c 0x070ef820: 070ef864 00000dfb 03433000 038cfa08 0x070ef830: 00000007 00000001 00000001 0000000a 0x070ef840: 03433bf4 fffffffe 070ef8f4 6d8f0b7a 0x070ef850: 070ef95c 03433bf8 6da6f210 6da6f538 0x070ef860: 070ef868 03433bf4 27f18708 27f18708 0x070ef870: 22eb9810 03433bc4 00000001 070ef898 Instructions: (pc=0x10009ccb) 0x10009cbb: 45 1c 7c 19 8b 85 44 fe ff ff 8b 95 4c fe ff ff 0x10009ccb: 89 50 08 8b 55 f4 89 d0 e9 f8 01 00 00 c7 85 50 Stack: [0x070a0000,0x070f0000], sp=0x070ef800, free space=13e070ef334k Native frames: (J=compiled Java code, j=interpreted, Vv=VM code, C=native code) C [rxtxSerial.dll+0x9ccb] C [rxtxSerial.dll+0xa05e] j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub V [jvm.dll+0xf049c] V [jvm.dll+0x17fcf1] V [jvm.dll+0xf0667] V [jvm.dll+0xf06dd] V [jvm.dll+0x11a2a0] V [jvm.dll+0x1ddb14] V [jvm.dll+0x17f96c] C [msvcr71.dll+0x9565] C [kernel32.dll+0xb729] Java frames: (J=compiled Java code, j=interpreted, Vv=VM code) j gnu.io.RXTXPort.readByte()I+0 j gnu.io.RXTXPort$SerialInputStream.read()I+61 j org.smslib.CSerialDriver.getResponse()Ljava/lang/String;+36 j net.frontlinesms.smsdevice.SmsModem._doDetection()Z+172 j net.frontlinesms.smsdevice.SmsModem.run()V+18 v ~StubRoutines::call_stub --------------- P R O C E S S --------------- Java Threads: ( => current thread ) =>0x03433000 JavaThread "SmsModem :: COM18" daemon [_thread_in_native, id=3464, stack(0x070a0000,0x070f0000)] 0x0344b800 JavaThread "D3D Screen Updater" daemon [_thread_blocked, id=4404, stack(0x03dd0000,0x03e20000)] 0x002b7800 JavaThread "DestroyJavaVM" [_thread_blocked, id=3236, stack(0x008c0000,0x00910000)] 0x03f6f400 JavaThread "AWT-EventQueue-0" [_thread_blocked, id=1888, stack(0x038e0000,0x03930000)] 0x03ec2400 JavaThread "AWT-Shutdown" [_thread_blocked, id=4300, stack(0x03740000,0x03790000)] 0x032d8c00 JavaThread "EmailServerHandler" [_thread_blocked, id=5708, stack(0x03830000,0x03880000)] 0x032f7000 JavaThread "Incoming message processor" [_thread_blocked, id=4184, stack(0x03650000,0x036a0000)] 0x03004c00 JavaThread "AWT-Windows" daemon [_thread_in_native, id=4828, stack(0x035a0000,0x035f0000)] 0x0303f400 JavaThread "Java2D Disposer" daemon [_thread_blocked, id=3768, stack(0x03500000,0x03550000)] 0x02b1e800 JavaThread "Low Memory Detector" daemon [_thread_blocked, id=4164, stack(0x02dd0000,0x02e20000)] 0x02b18c00 JavaThread "CompilerThread0" daemon [_thread_blocked, id=2936, stack(0x02d80000,0x02dd0000)] 0x02b17400 JavaThread "Attach Listener" daemon [_thread_blocked, id=5444, stack(0x02d30000,0x02d80000)] 0x02b15c00 JavaThread "Signal Dispatcher" daemon [_thread_blocked, id=4976, stack(0x02ce0000,0x02d30000)] 0x02b0d800 JavaThread "Finalizer" daemon [_thread_blocked, id=5876, stack(0x02c90000,0x02ce0000)] 0x02b0c400 JavaThread "Reference Handler" daemon [_thread_blocked, id=5984, stack(0x02c40000,0x02c90000)] Other Threads: 0x02b0ac00 VMThread [stack: 0x02bf0000,0x02c40000] [id=4508] 0x02b29800 WatcherThread [stack: 0x02e20000,0x02e70000] [id=6080] VM state:not at safepoint (normal execution) VM Mutex/Monitor currently owned by a thread: None Heap def new generation total 7808K, used 4003K [0x22990000, 0x23200000, 0x27ee0000) eden space 6976K, 45% used [0x22990000, 0x22ca8e90, 0x23060000) from space 832K, 100% used [0x23060000, 0x23130000, 0x23130000) to space 832K, 0% used [0x23130000, 0x23130000, 0x23200000) tenured generation total 17208K, used 15192K [0x27ee0000, 0x28fae000, 0x32990000) the space 17208K, 88% used [0x27ee0000, 0x28db6100, 0x28db6200, 0x28fae000) compacting perm gen total 13824K, used 13655K [0x32990000, 0x33710000, 0x36990000) the space 13824K, 98% used [0x32990000, 0x336e5f98, 0x336e6000, 0x33710000) ro space 10240K, 51% used [0x36990000, 0x36ebae00, 0x36ebae00, 0x37390000) rw space 12288K, 54% used [0x37390000, 0x37a272d8, 0x37a27400, 0x37f90000) Dynamic libraries: 0x00400000 - 0x00424000 C:\WINDOWS\system32\java.exe 0x7c900000 - 0x7c9b2000 C:\WINDOWS\system32\ntdll.dll 0x7c800000 - 0x7c8f6000 C:\WINDOWS\system32\kernel32.dll 0x77dd0000 - 0x77e6b000 C:\WINDOWS\system32\ADVAPI32.dll 0x77e70000 - 0x77f02000 C:\WINDOWS\system32\RPCRT4.dll 0x77fe0000 - 0x77ff1000 C:\WINDOWS\system32\Secur32.dll 0x7c340000 - 0x7c396000 C:\Program Files\Java\jre6\bin\msvcr71.dll 0x6d800000 - 0x6da97000 C:\Program Files\Java\jre6\bin\client\jvm.dll 0x7e410000 - 0x7e4a1000 C:\WINDOWS\system32\USER32.dll 0x77f10000 - 0x77f59000 C:\WINDOWS\system32\GDI32.dll 0x76b40000 - 0x76b6d000 C:\WINDOWS\system32\WINMM.dll 0x76390000 - 0x763ad000 C:\WINDOWS\system32\IMM32.DLL 0x6d7b0000 - 0x6d7bc000 C:\Program Files\Java\jre6\bin\verify.dll 0x6d330000 - 0x6d34f000 C:\Program Files\Java\jre6\bin\java.dll 0x6d290000 - 0x6d298000 C:\Program Files\Java\jre6\bin\hpi.dll 0x76bf0000 - 0x76bfb000 C:\WINDOWS\system32\PSAPI.DLL 0x6d7f0000 - 0x6d7ff000 C:\Program Files\Java\jre6\bin\zip.dll 0x6d000000 - 0x6d14a000 C:\Program Files\Java\jre6\bin\awt.dll 0x73000000 - 0x73026000 C:\WINDOWS\system32\WINSPOOL.DRV 0x77c10000 - 0x77c68000 C:\WINDOWS\system32\msvcrt.dll 0x774e0000 - 0x7761d000 C:\WINDOWS\system32\ole32.dll 0x773d0000 - 0x774d3000 C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.5512_x-ww_35d4ce83\COMCTL32.dll 0x77f60000 - 0x77fd6000 C:\WINDOWS\system32\SHLWAPI.dll 0x5ad70000 - 0x5ada8000 C:\WINDOWS\system32\uxtheme.dll 0x74720000 - 0x7476c000 C:\WINDOWS\system32\MSCTF.dll 0x755c0000 - 0x755ee000 C:\WINDOWS\system32\msctfime.ime 0x7c9c0000 - 0x7d1d7000 C:\WINDOWS\system32\shell32.dll 0x6d230000 - 0x6d284000 C:\Program Files\Java\jre6\bin\fontmanager.dll 0x68000000 - 0x68036000 C:\WINDOWS\system32\rsaenh.dll 0x769c0000 - 0x76a74000 C:\WINDOWS\system32\USERENV.dll 0x5b860000 - 0x5b8b5000 C:\WINDOWS\system32\netapi32.dll 0x6d610000 - 0x6d623000 C:\Program Files\Java\jre6\bin\net.dll 0x71ab0000 - 0x71ac7000 C:\WINDOWS\system32\WS2_32.dll 0x71aa0000 - 0x71aa8000 C:\WINDOWS\system32\WS2HELP.dll 0x71a50000 - 0x71a8f000 C:\WINDOWS\System32\mswsock.dll 0x76f20000 - 0x76f47000 C:\WINDOWS\system32\DNSAPI.dll 0x76fb0000 - 0x76fb8000 C:\WINDOWS\System32\winrnr.dll 0x76f60000 - 0x76f8c000 C:\WINDOWS\system32\WLDAP32.dll 0x16080000 - 0x160a5000 C:\Program Files\Bonjour\mdnsNSP.dll 0x76d60000 - 0x76d79000 C:\WINDOWS\system32\Iphlpapi.dll 0x63560000 - 0x63568000 C:\Program Files\National Instruments\Shared\mDNS Responder\nimdnsNSP.dll 0x63550000 - 0x63559000 C:\WINDOWS\system32\nimdnsResponder.dll 0x78130000 - 0x781cb000 C:\WINDOWS\WinSxS\x86_Microsoft.VC80.CRT_1fc8b3b9a1e18e3b_8.0.50727.4053_x-ww_e6967989\MSVCR80.dll 0x76fc0000 - 0x76fc6000 C:\WINDOWS\system32\rasadhlp.dll 0x10000000 - 0x10012000 C:\Documents and Settings\bjz677\Desktop\client run\rxtxSerial.dll 0x73d90000 - 0x73db7000 C:\WINDOWS\system32\crtdll.dll 0x4fdd0000 - 0x4ff76000 C:\WINDOWS\system32\d3d9.dll 0x038d0000 - 0x038d6000 C:\WINDOWS\system32\d3d8thk.dll 0x77c00000 - 0x77c08000 C:\WINDOWS\system32\VERSION.dll 0x6d630000 - 0x6d639000 C:\Program Files\Java\jre6\bin\nio.dll 0x03930000 - 0x03977000 C:\Program Files\Iomega\DriveIcons\IMGHOOK.DLL 0x605d0000 - 0x605d9000 C:\WINDOWS\system32\mslbui.dll 0x77120000 - 0x771ab000 C:\WINDOWS\system32\OLEAUT32.DLL VM Arguments: java_command: net.frontlinesms.DesktopLauncher Launcher Type: SUN_STANDARD Environment Variables: JAVA_HOME=C:\Program Files\Java\jdk1.6.0_20\bin CLASSPATH=.;C:\Program Files\Java\jre6\lib\ext\QTJava.zip; PATH=C:\Program Files\Intel\MKL\10.0.2.019\ia32\bin;C:\Program Files\Intel\VTune\CGGlbCache;C:\Program Files\Intel\VTune\Analyzer\Bin;C:\Program Files\Intel\VTune\Shared\Bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;s:\datamart\bin;C:\Program Files\ATI Technologies\ATI.ACE\;C:\Program Files\IVI\bin;c:\Program Files\Microsoft SQL Server\90\Tools\binn\;C:\Program Files\MATLAB\R2007b\bin;C:\Program Files\MATLAB\R2007b\bin\win32;C:\VXIPNP\WinNT\Bin;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\IA32\Lib;C:\Program Files\Intel\Compiler\Fortran\10.1.021\\EM64T\Lib;C:\VXIPNP\WinNT\Bin\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\Program Files\QuickTime\QTSystem\;C:\Program Files\Java\jdk1.6.0_20\bin USERNAME=xxx OS=Windows_NT PROCESSOR_IDENTIFIER=x86 Family 6 Model 15 Stepping 2, GenuineIntel --------------- S Y S T E M --------------- OS: Windows XP Build 2600 Service Pack 3 CPU:total 2 (2 cores per cpu, 1 threads per core) family 6 model 15 stepping 2, cmov, cx8, fxsr, mmx, sse, sse2, sse3, ssse3 Memory: 4k page, physical 2094960k(1063364k free), swap 4032536k(3038408k free) vm_info: Java HotSpot(TM) Client VM (16.3-b01) for windows-x86 JRE (1.6.0_20-b02), built on Apr 12 2010 13:52:23 by "java_re" with MS VC++ 7.1 (VS2003) time: Wed Jun 16 11:53:40 2010 elapsed time: 45 seconds Anyone knows what caused this? Please answer keeping in mind I am new to Java. Thanks, Varun

  Read the article

• Informix "Database locale information mismatch"

  - by lmmortal

  I have informix 11.5 running in my Win-2003 box and few databases running in it. System databases have locale en_us.819 My custom databases have locale en_us.57372 (UTF8). There is also application deployed to JBoss 4.0.2 which has few datasources configured for those custom databases. <local-tx-datasource> <jndi-name>InformixDS</jndi-name> <connection-url>jdbc:informix-sqli://@database.server@:@database.port@/tcs_catalog:[email protected]@</connection-url> <driver-class>com.informix.jdbc.IfxDriver</driver-class> <user-name>@database.username@</user-name> <password>@database.password@</password> <new-connection-sql>set lock mode to wait 5</new-connection-sql> <check-valid-connection-sql>select '1' from dual</check-valid-connection-sql> <metadata> <type-mapping>InformixDB</type-mapping> </metadata> I'm logged in as Administrator and when I start JBoss the following error is shown Caused by: java.sql.SQLException: Database locale information mismatch. at com.informix.util.IfxErrMsg.getSQLException(IfxErrMsg.java:373) at com.informix.jdbc.IfxSqli.a(IfxSqli.java:3208) at com.informix.jdbc.IfxSqli.E(IfxSqli.java:3518) at com.informix.jdbc.IfxSqli.dispatchMsg(IfxSqli.java:2353) at com.informix.jdbc.IfxSqli.receiveMessage(IfxSqli.java:2269) at com.informix.jdbc.IfxSqli.executeOpenDatabase(IfxSqli.java:1786) at com.informix.jdbc.IfxSqliConnect.<init>(IfxSqliConnect.java:1327) at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method) at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39) at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27) at java.lang.reflect.Constructor.newInstance(Constructor.java:501) at com.informix.jdbc.IfxDriver.connect(IfxDriver.java:254) at org.jboss.resource.adapter.jdbc.local.LocalManagedConnectionFactory.createManagedConnection(LocalManagedConnectionFactory.java:151) ... 160 more Caused by: java.sql.SQLException at com.informix.util.IfxErrMsg.getSQLException(IfxErrMsg.java:373) at com.informix.jdbc.IfxSqli.E(IfxSqli.java:3523) ... 170 more DB_LOCALE and CLIENT_LOCALE are set to en_us.utf8 for Administrator. When I set in Server Studio DB_LOCALE and CLIENT_LOCALE to en_us.utf8 I can connect my databases. Where should I set DB_LOCALE and CLIENT_LOCALE to avoid this Database locale information mismatch error? Thanks.

  Read the article

• networking through openstack installed on vm

  - by Mandar Katdare

  I am trying to set up a test installation of Openstack on a Ubuntu 12.04 VM running on a ESXi server. So far I have been able to launch the VMs on the ESXi, however am unable to assign IP addresses to them. As the VM with the Openstack installation has a single public IP, I wish to assign IPs to the VMs create through Openstack so that they can directly interact with the public network itself without having a separate private network. So I feel that bridging would not be the correct option here. But am unable to find the correct documents to go ahead with such an install. My ifconfig looks as follows: eth0 Link encap:Ethernet HWaddr 00:0c:29:6f:8a:d7 inet addr:192.168.4.167 Bcast:192.168.4.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe6f:8ad7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:391640 errors:33 dropped:98 overruns:0 frame:0 TX packets:545044 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:40303931 (40.3 MB) TX bytes:763127348 (763.1 MB) Interrupt:18 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:146127 errors:0 dropped:0 overruns:0 frame:0 TX packets:146127 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:799815763 (799.8 MB) TX bytes:799815763 (799.8 MB) virbr0 Link encap:Ethernet HWaddr 8a:80:33:32:63:a0 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) The eth0 is the adapter that I intend to use for all communication. My nova.conf looks as follows: --dhcpbridge_flagfile=/etc/nova/nova.conf --dhcpbridge=/usr/bin/nova-dhcpbridge --logdir=/var/log/nova --state_path=/var/lib/nova --lock_path=/var/lock/nova --allow_admin_api=true --use_deprecated_auth=false --auth_strategy=keystone --scheduler_driver=nova.scheduler.simple.SimpleScheduler --s3_host=192.168.4.167 --ec2_host=192.168.4.167 --rabbit_host=192.168.4.167 --cc_host=192.168.4.167 --nova_url=http://192.168.4.167:8774/v1.1/ --routing_source_ip=192.168.4.167 --glance_api_servers=192.168.4.167:9292 --image_service=nova.image.glance.GlanceImageService --iscsi_ip_prefix=192.168.4 --sql_connection=mysql://novadbadmin:[email protected]/nova --ec2_url=http://192.168.4.167:8773/services/Cloud --keystone_ec2_url=http://192.168.4.167:5000/v2.0/ec2tokens --api_paste_config=/etc/nova/api-paste.ini --libvirt_type=kvm --libvirt_use_virtio_for_bridges=true --start_guests_on_host_boot=true --resume_guests_state_on_host_boot=true --vnc_enabled=true --vncproxy_url=http://192.168.4.167:6080 --vnc_console_proxy_url=http://192.168.4.167:6080 # network specific settings --network_manager=nova.network.manager.FlatDHCPManager --public_interface=eth0 --vmwareapi_host_ip=192.168.4.254 --vmwareapi_host_username=**** --vmwareapi_host_password=**** --vmwareapi_wsdl_loc=http://127.0.0.1:8080/wsdl/vim25/vimService.wsdl --fixed_range=192.168.4.190/24 --floating_range=192.168.4.190/24 --network_size=32 --flat_network_dhcp_start=192.168.4.190 --flat_injected=False --force_dhcp_release --iscsi_helper=tgtadm --connection_type=vmwareapi --root_helper=sudo nova-rootwrap --verbose --libvirt_use_virtio_for_bridges --ec2_private_dns_show --novnc_enabled=true --novncproxy_base_url=http://192.168.4.167:6080/vnc_auto.html --vncserver_proxyclient_address=192.168.4.167 --vncserver_listen=192.168.4.167 192.168.4.167 is my VM with the Openstack installation and 192.168.4.254 is my ESXi server on which the VM runs. Can anyone advice me about how to proceed? Thanks, Mandar

  Read the article

• cron doesn't execute it's commands

  - by Silvio Keller

  I created an own small server with Debian. Last night i updated it. It created an error while generating the initrd and it didn't boot. Today i booted from another filesystem and did dpkg --configure -a with chroot. I also checked the filesystem. Now everything should be ok. But cron doesn't work:-( It is the same /etc/crontab-File but it doesn't work. I reinstalled cron and tried many things. Is there a way to see cron's log? I only readed about rsyslog, but i have not installed rsyslog, because the server is based on a minimal system (Freeagent Dockstar). Has someone an idea? Best regards Silvio Keller Update There is no file /var/log/syslog and dpkg -l|grep syslog gives me no output, so i think syslog is not installed. It is only a minimal system. cron -l gives: cron: can't lock /var/run/crond.pid, otherpid may be 687: Resource temporarily unavailable So i stopped cron with /etc/init.d/cron stop and executed cron -l again, this gives no output. At this moment i tried to start cron with /etc/init.d/cron start: Starting periodic command scheduler: cron failed! But there's no additional error info... But i see there's now in the background a proccess called cron -l which runs. If i stop it /etc/init.d/cron start works: Starting periodic command scheduler: cron. I used the crontab-file /etc/crontab, this worked for me always. Till i updated my kernel and the initrd it doesn't. The file's content is: SHELL=/bin/sh PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin # m h dom mon dow user command 17 * * * * root cd / && run-parts --report /etc/cron.hourly 25 6 * * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) 47 6 * * 7 root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly ) 52 6 1 * * root test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly ) 00 5 * * * root dummy 23 45 * * 7 root dummy 00 * * * * root dummy */1 * * * * root dummy 00 1 * * * root dummy 00 4 * * * root dummy */5 * * * * root dummy #00 */10 * * * root dummy 01 0 * * * root dummy 00 5 * * * root dummy 00 4 * * * root dummy # If i start crontab -e it creates a new file /tmp/crontab.vn87tv/crontab, which is unfortunaly on a tmpfs and which also doesn't work. Thanks & Best regards

  Read the article

• IRP_MJ_WRITE latency up to 15 seconds

  - by racitup

  We have written an application that performs small (22kB) writes to multiple files at once (one thread performing asynchronous queued writes to multiple locations on behalf of other threads) on the same local volume (RAID1). 99.9% of the writes are low-latency but occasionally (maybe every minute or two) we get one or two huge latency writes (I have seen 10 seconds and above) without any real explanation. Platform: Win2003 Server with NTFS. Monitoring: Sysinternals Process Monitor (see link below) and our own application logging. We have tried multiple things to try and solve this that have been gleaned from a few websites, e.g.: Making the first part of file names unique to aid 8.3 name generation Writing files to multiple directories Changing Intel Disk Write Caching Windows File/Printer Sharing Minimize memory used Balance Maximize data throughput for file sharing Maximize data throughput for network applications System-Advanced-Performance-Advanced NtfsDisableLastAccessUpdate - use fsutil behavior set disablelastaccess 1 disable 8.3 name generation - use "fsutil behavior set disable8dot3 1" + restart Enable a large size file system cache Disable paging of the kernel code IO Page Lock Limit Turn Off (or On) the Indexing Service But nothing seems to make much difference. There's a whole host of things we haven't tried yet but we wondered if anyone had come across the same problem, a reason and a solution (programmatic or not)? We can reproduce the problem using IOMeter and a simple setup: Start IOMeter and remove all but the first worker thread in 'Topology' using the disconnect button. Select the Worker thread and put a cross in the box next to the disk you want to use in the Disk Targets tab and put '2000000' in Maximum Disk Size (NOTE: must have at least 1GB free space; sector size is 512 bytes) Next create a new access specification and add it to the worker thread: Transfer Request Size = 22kB 100% Sequential Percent of Access Spec = 100% Percent Read/Write = 100% Write Change Results Display Update Frequency to 5 seconds, Test Setup Run Time to 20 seconds and both 'Number of Workers to Spawn Automatically' settings to zero. Select the Worker Thread in the Topology panel and hit the Duplicate Worker button 59 times to create 60 threads with identical settings. Hit the 'Go' button (green flag) and monitor the Results tab. The 'Maximum I/O Response Time (ms)' always hits at least 3500 on our machine. Our machine isn't exactly slow (Xeon 8 core rack server with 4GB and onboard RAID). I'd be interested to see what other people get. We have a feeling it might be something to do with the NTFS filesystem (ours is currently 75% full of fragmented files) and we are going to try a few things around this principle. But it is also related to disk performance since we don't see it on a RAMDisk and it's not as severe on a RAID10 array. Any help is much appreciated. Richard Right-click and select 'Open Link in New Tab': ProcMon Result

  Read the article

• Blank Screen After Login on Windows 7

  - by Leigh Riffel

  When unlocking a Windows 7 computer the screen briefly (less than a second) goes blank before showing the screen. Abound once a month (but sometimes within a few days) when I unlock my computer the screen doesn't come back from this brief blackout and stays black. Sometimes after five minutes or so the display will come back. Other times it has been blank for over 20 minutes, so I give up and restart the computer. It seems to happen more often when the computer has been locked for a longer period of time - I lock my computer several times a day, but the problem most happens when I come in at the start of the day. I have updated my video card and monitor drivers. I have two monitors driven by the same graphics card. The computer is a Dell Optiplex 740. When the problem occurs both monitors have a green light on to indicate that they are receiving signal. I've tried unplugging the monitors from the video card and turning the monitors on and off. The screen saver is set to one that is not blank screen. The Windows power settings are set to never turn off the display. When the problem occurs there is no significant disk activity occurring. When the problem occurs I can connect over the network to the hard drive on my computer. When the problem occurs I can't connect over the network with a VNC connection. The VNC client doesn't give an error, but also won't show the screen. The task actually seems to hang as I can see the task, but there is no window for it. This problem occurred when I was running a pre-release version of Windows 7. The hard drive was formatted for release version and the problem still occurs. I've been stopping some of my always running programs to see if one of them may be the culprit, but given the span between failures that will take some time to find the problem if it will even help at all. Some programs I have always running include IE, Firefox, Outlook, Evernote, Kana Reminder, Ditto, Macro Express, Timesnapper, and DisplayFusion. Any ideas appreciated.

  Read the article

• Issues with Server 2012 using DFSR running on Hyper-V 2012

  - by Bryan

  We have a number of Server 2012 systems, all of which run virtualised on Hyper-V 2012 server. We are having problems with two such virtual instances, both of which are used as file servers, whereby they occasionally stop responding to requests to serve files to clients. After logging on to the server, attempts to shut it down gracefully fail (no error, it just fails to acknowledge a shutdown request). Recovery is a case of power cycling the server(s) from the Hyper-V console. These two servers don't server a large number of users (one serves no more than 6 users, and the other serves around 20 users), they are in the same domain, but on different physical hardware (and at different sites). They don't lock up at the same time. They both use DFSR to replicate a fairly large amount of data between themselves (200GB) over ADSL connections, this is working fine, and we have been using DFSR to do this on the previous two generations of server OS we have used (Server 2008 R2 and Server 2003 - both of which were physical installs however). Today, when one of the servers crashed, I noticed an entry in the event log, which looked similar to the following: Log Name: Application Source: ESENT Date: 27/11/2012 10:25:55 Event ID: 533 Task Category: General Level: Warning Keywords: Classic User: N/A Computer: HAL-FS-01.example.com Description: DFSRs (1500) \\.\E:\System Volume Information\DFSR\database_C8CC_101_CC00_EC0E\ dfsr.db: A request to write to the file "\\.\E:\System Volume Information\ DFSR\database_C8CC_101_CC00_EC0E\fsr.log" at offset 4423680 (0x0000000000438000) for 4096 (0x00001000) bytes has not completed for 36 second(s). This problem is likely due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem. When the server started up again, I went to find the event log entry to investigate further and found that the event log entry was no longer there (I assume it was in memory but failed to write to disk before the server was powered off, for the reason mentioned in the message). I found the above message by searching back further in the event log. Both of these virtual servers have their E: volumes fully allocated as opposed to dynamically expanding, and there are no other issues on any of the other virtual servers (which include server 2012, server 2008 R2 and Ubuntu 12.04 x64). There are no signs of IO, memory or CPU starvation on the host systems. I've used performance counters on the affected virtual servers to monitor memory usage (including non paged pool usage), as well as CPU and network utilisation, and none of these show any signs of trouble when the issue arises. I would have thought our configuration isn't that uncommon, so I'm wondering if anyone else has seen this, and managed to resolve the problem?

  Read the article

• iPhone 3.1 Black Screen

  - by churnd

  Since I've updated my 3G iPhone to 3.1, it will become unresponsive after ~4-5 hours. It looks like it's off, but it's not. None of the buttons do anything that I can see. The only way I can get a screen back is to do a hard reset (Power + Home). Has anyone else had this problem? What can I do to fix it? I've had it 3 happen 3 times already. Very annoying. Apparently, the Discussions forum on Apple.com also shows lots of people are having the same problem. One guy said he did a restore and that fixed it for him, which I haven't tried yet because many others also tried that and it didn't help. A few others have said turning off WIFI fixes it for them, so I'm going to try that today. Another thing I've noticed is that now, when I plug in my iPhone to my Macbook Pro, iTunes 9 does not launch. It used to before the update. ** Further update and possible solution ** I left my iPhone plugged into my Macbook Pro yesterday while at work, and didn't use it much throughout the day. I noticed it didn't lock up once. I suspect this was because it was connected to a power source. I continued to use my iPhone with no problem yesterday and today. Still no lockups as of now. I personally think this was Spotlight and/or Genius "doing it's thing" from a new install. Kinda like an OS upgrade on your Mac... Spotlight has to rebuild itself and those first couple of hours can be kinda sluggish. This would be even more so on the iPhone where processing power is limited, and I'm sure the processor is clocked down a bit while on battery power, which would further amplify the problem. Again, just my guess. My iPhone is working fine now. ** Final Solution ** Update to 3.1.2. Problem solved.

  Read the article

• Disable .htaccess from apache allowoverride none, still reads .htaccess files

  - by John Magnolia

  I have moved all of our .htaccess config into <Directory> blocks and set AllowOverride None in the default and default-ssl. Although after restarting apache it is still reading the .htaccess files. How can I completely turn off reading these files? Update of all files with "AllowOverride" /etc/apache2/mods-available/userdir.conf <IfModule mod_userdir.c> UserDir public_html UserDir disabled root <Directory /home/*/public_html> AllowOverride FileInfo AuthConfig Limit Indexes Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec <Limit GET POST OPTIONS> Order allow,deny Allow from all </Limit> <LimitExcept GET POST OPTIONS> Order deny,allow Deny from all </LimitExcept> </Directory> </IfModule> /etc/apache2/mods-available/alias.conf <IfModule alias_module> # # Aliases: Add here as many aliases as you need (with no limit). The format is # Alias fakename realname # # Note that if you include a trailing / on fakename then the server will # require it to be present in the URL. So "/icons" isn't aliased in this # example, only "/icons/". If the fakename is slash-terminated, then the # realname must also be slash terminated, and if the fakename omits the # trailing slash, the realname must also omit it. # # We include the /icons/ alias for FancyIndexed directory listings. If # you do not use FancyIndexing, you may comment this out. # Alias /icons/ "/usr/share/apache2/icons/" <Directory "/usr/share/apache2/icons"> Options Indexes MultiViews AllowOverride None Order allow,deny Allow from all </Directory> </IfModule> /etc/apache2/httpd.conf # # Directives to allow use of AWStats as a CGI # Alias /awstatsclasses "/usr/share/doc/awstats/examples/wwwroot/classes/" Alias /awstatscss "/usr/share/doc/awstats/examples/wwwroot/css/" Alias /awstatsicons "/usr/share/doc/awstats/examples/wwwroot/icon/" ScriptAlias /awstats/ "/usr/share/doc/awstats/examples/wwwroot/cgi-bin/" # # This is to permit URL access to scripts/files in AWStats directory. # <Directory "/usr/share/doc/awstats/examples/wwwroot"> Options None AllowOverride None Order allow,deny Allow from all </Directory> Alias /awstats-icon/ /usr/share/awstats/icon/ <Directory /usr/share/awstats/icon> Options None AllowOverride None Order allow,deny Allow from all </Directory> /etc/apache2/sites-available/default-ssl <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 # MSIE 7 and newer should be able to use keepalive BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown </VirtualHost> </IfModule> /etc/apache2/sites-available/default <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options -Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> Alias /delboy /usr/share/phpmyadmin <Directory /usr/share/phpmyadmin> # Restrict phpmyadmin access Order Deny,Allow Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> /etc/apache2/conf.d/security # # Disable access to the entire file system except for the directories that # are explicitly allowed later. # # This currently breaks the configurations that come with some web application # Debian packages. # #<Directory /> # AllowOverride None # Order Deny,Allow # Deny from all #</Directory> # Changing the following options will not really affect the security of the # server, but might make attacks slightly more difficult in some cases. # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minimal | Minor | Major | Prod # where Full conveys the most information, and Prod the least. # #ServerTokens Minimal ServerTokens OS #ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # #ServerSignature Off ServerSignature On # # Allow TRACE method # # Set to "extended" to also reflect the request body (only for testing and # diagnostic purposes). # # Set to one of: On | Off | extended # TraceEnable Off #TraceEnable On /etc/apache2/apache2.conf # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "foo.log" # with ServerRoot set to "/etc/apache2" will be interpreted by the # server as "/etc/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs/2.2/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # #ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # LockFile ${APACHE_LOCK_DIR}/accept.lock # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 4 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 500 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadLimit: ThreadsPerChild can be changed to this maximum value during a # graceful restart. ThreadLimit can only be changed by stopping # and starting Apache. # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # event MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_event_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadLimit 64 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all Satisfy all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog ${APACHE_LOG_DIR}/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include mods-enabled/*.load Include mods-enabled/*.conf # Include all the user configurations: Include httpd.conf # Include ports listing Include ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include conf.d/ # Include the virtual host configurations: Include sites-enabled/

  Read the article

• Memcached Debuging/Server Logs Monitor the Memcached Servers?

  - by user1179459

  I have chat engine which is based on the Memcached variables, putting them into arrays and reading them in other end via jquery, which works fine 95% of the times, however when the server load is high memcached (presume its the memcached) the crash and browser gets stucks up. I dont think its jquery issue since this only happens when the server load is very high. I need a way to monitor the memcached servers or somehow write a log file into where the fails/errors comes in... Any idea on how i can do this ? or any idea why memcached servers fails ? I run the memcached as follows $GLOBALS['MemCached'] = FALSE; $GLOBALS['MemCached'] = new Memcache; $GLOBALS['MemCached']->pconnect('localhost', 11211); My memcached config is as follows #! /bin/sh # # chkconfig: - 55 45 # description: The memcached daemon is a network memory cache service. # processname: memcached # config: /etc/sysconfig/memcached # pidfile: /var/run/memcached/memcached.pid # Standard LSB functions #. /lib/lsb/init-functions # Source function library. . /etc/init.d/functions PORT=11211 USER=memcached MAXCONN=1024 CACHESIZE=128 OPTIONS="" if [ -f /etc/sysconfig/memcached ];then . /etc/sysconfig/memcached fi # Check that networking is up. . /etc/sysconfig/network if [ "$NETWORKING" = "no" ] then exit 0 fi RETVAL=0 prog="memcached" pidfile=${PIDFILE-/var/run/memcached/memcached.pid} lockfile=${LOCKFILE-/var/lock/subsys/memcached} start () { echo -n $"Starting $prog: " # Ensure that /var/run/memcached has proper permissions if [ "`stat -c %U /var/run/memcached`" != "$USER" ]; then chown $USER /var/run/memcached fi daemon --pidfile ${pidfile} memcached -d -p $PORT -u $USER -m $CACHESIZE -c $MAXCONN -P ${pidfile} $OPTIONS RETVAL=$? echo [ $RETVAL -eq 0 ] && touch ${lockfile} } stop () { echo -n $"Stopping $prog: " killproc -p ${pidfile} /usr/bin/memcached RETVAL=$? echo if [ $RETVAL -eq 0 ] ; then rm -f ${lockfile} ${pidfile} fi } restart () { stop start } # See how we were called. case "$1" in start) start ;; stop) stop ;; status) status -p ${pidfile} memcached RETVAL=$? ;; restart|reload|force-reload) restart ;; condrestart|try-restart) [ -f ${lockfile} ] && restart || : ;; *) echo $"Usage: $0 {start|stop|status|restart|reload|force-reload|condrestart|try-restart}" RETVAL=2 ;; esac exit $RETVAL

  Read the article

• How to iptables forward ppp0 to eth0

  - by HPHPHP2012

  need your help with get it routing properly. I've server with eth0 (external interface) and eth1(internal interface). eth1 is merged into the bridge br0 (172.16.1.1) I've installed the pptp and successfully configured it, so I got ppp0 interface (192.168.91.1) and got my VPN clients successfully connected. So I need your help to manage how to allow my VPN clients use internet connection (eth0). Below my configuration files, any help is much appreciated! Thank you! P.S. VPN clients are Windows Xp, Windows 7, Mac OS X Lion, Ubuntu 12.04, iOS 5.x cat /etc/pptpd.conf #local server ip address localip 192.168.91.1 #remote addresses remoteip 192.168.91.11-254,192.168.91.10 #translating ip addresses on this interface bcrelay br0 cat /etc/ppp/pptpd-options name pptpd refuse-pap refuse-chap refuse-mschap require-mschap-v2 require-mppe-128 ms-dns 8.8.8.8 ms-dns 8.8.4.4 nodefaultroute lock nobsdcomp auth logfile /var/log/pptpd.log cat /etc/nat-up #!/bin/sh SERVER_IP="aaa.aaa.aaa.aaa" LOCAL_IP="172.16.1.1" #eth0 with public ip PUBLIC="eth0" #br0 is internal bridge on eth1 interface INTERNAL="br0" #vpn VPN="ppp0" #local LOCAL="lo" iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward iptables -A INPUT -i $LOCAL -j ACCEPT iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A INPUT -m state --state NEW ! -i $PUBLIC -j ACCEPT ####CLEAR CONFIG#### #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -m state --state ESTABLISHED,RELATED -j ACCEPT #iptables -A FORWARD -i $PUBLIC -o $INTERNAL -j ACCEPT #iptables -A FORWARD -i $INTERNAL -o $PUBLIC -j ACCEPT #iptables -t nat -A POSTROUTING -j MASQUERADE ####THIS PART IS NOT HANDLING IT#### iptables -A FORWARD -i $PUBLIC -o $VPN -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -i $PUBLIC -o $VPN -j ACCEPT iptables -A FORWARD -s 192.168.91.0/24 -o $PUBLIC -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.91.0/24 -o $PUBLIC -j MASQUERADE # VPN - PPTPD iptables -A INPUT -p gre -s 0/0 -j ACCEPT iptables -A OUTPUT -p gre -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A INPUT -p tcp -s 0/0 --dport 1723 -j ACCEPT #SSH iptables -A INPUT -p tcp --dport 2222 -j ACCEPT iptables -A OUTPUT -p tcp --sport 2222 -j ACCEPT #BLACKLIST BLOCKDB="/etc/ip.blocked" IPS=$(grep -Ev "^#" $BLOCKDB) for i in $IPS do iptables -A INPUT -s $i -j DROP iptables -A OUTPUT -d $i -j DROP done

  Read the article

• My server freezes within a few hours of logging out. Staying logged in keeps the server running

  - by HappyEngineer

  I have an Ubuntu Godaddy server I use to host mail and webapps. It started having problems a couple months ago. It would lock up and stop responding to anything. I couldn't ssh into it, so I'd have godaddy power cycle the server. I have never seen anything that looked suspicious in the var logs (although I'm no expert at reading them). An fsck turned up no problems. Godaddy replaced the ram, but found no hardware problems. I started logging the output from "top" to a log file and found that even that stops running when the server freezes. Now, here is the crazy part: It got so bad that it would actually go down every few hours, but then it stopped going down. I eventually realized I had left an ssh terminal logged into the machine running top. This seemed unlikely to be a reason, but after the server was up with no problems for a full week (remember, it had been going down after just a few hours), I disconnected from the ssh session. Lo and behold, within a few hours the server froze again! I had them power cycle again and then left another ssh session open with top. It has been going without problems for 8 days now. I told others about this and they hardly believe me. I simply can't imagine what is going on. I don't know what else to try other than to just get a new server and reinstall everything. Does anyone have any ideas about what I can look for to determine what the cause is? Is it possible there's some sort of exploit on the server which only runs if everyone is logged out of the system? EDIT: The power management gone haywire sounds plausible, so I've modified the /boot/grub/menu.lst to boot with acpi=off and apm=off. It appears to have prevented kacpid and kacpid_notify from being in the process list, so I assume I did that right. I've disconnected all my sessions from the server. I'll check later tonight to see if it's still up. If it goes down then I'll try the pinging process idea. EDIT: It went down again. It lasted about a day. I've had them reboot, so now I'll try running "nohup ping -i 5 google.com &" and then disconnect. If it goes down again I'll come back. Hopefully someone will have some more ideas.

  Read the article

• Permissions problems with Apache / SVN

  - by Fred Wuerges

  I am installed a SVN server (v1.6) on a VPS contracted with CentOS 5, Apache 2.2 with WHM panel. I installed and configured all necessary modules and am able to create and access repositories via my web browser normally. The problem: I can not commit or import anything, always return permission errors: First error: Can not open file '/var/www/svn/test/db/txn-current-lock': Permission denied After fix the previous error: Can't open '/var/www/svn/test/db/tempfile.tmp': Permission denied And other... (and happends many others) Can't open file '/var/www/svn/test/db/txn-protorevs/0-1m.rev': Permission denied I've read and executed permissions on numerous tutorials regarding this errors, all without success. I've defined the owner as apache or nobody and different permissions for folders and files. I'm using TortoiseSVN to connect to the server. Some information that may find useful: I'm trying to perform commit through an external HTTP connection, like: svn commit http://example.com/svn/test SELinux is disabled. sestatus returns SELinux status: disabled Running the command to see the active processes of Apache, some processes are left with user/group "nobody". I tried changing the settings of Apache to not run with that user/group, but all my websites stopped working, returning this error: Forbidden You don't have permission to access / on this server. Additionally, a 403 Forbidden error was encountered while trying to use an ErrorDocument to handle the request. Apache process list: root@vps [/var/www]# ps aux | egrep '(apache|httpd)' root 19904 0.0 4.4 133972 35056 ? Ss 16:58 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20401 0.0 3.5 133972 27772 ? S 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL root 20409 0.0 3.4 133972 27112 ? S 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20410 0.0 3.8 190040 30412 ? Sl 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20412 0.0 3.9 190344 30944 ? Sl 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20414 0.0 4.4 190160 35364 ? Sl 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20416 0.0 4.0 190980 32108 ? Sl 17:01 0:00 /usr/local/apache/bin/httpd -k start -DSSL nobody 20418 0.3 5.3 263028 42328 ? Sl 17:01 0:12 /usr/local/apache/bin/httpd -k start -DSSL root 32409 0.0 0.1 7212 816 pts/0 R+ 17:54 0:00 egrep (apache|httpd) SVN folder permission var/www/: drwxrwxr-x 3 apache apache 4096 Dec 11 16:41 svn/ Repository permission var/www/svn/: drwxrwxr-x 6 apache apache 4096 Dec 11 16:41 test/ Internal folders of repository var/www/svn/test: drwxrwxr-x 2 apache apache 4096 Dec 11 16:41 conf/ drwxrwxr-x 6 apache apache 4096 Dec 11 16:41 db/ -rwxrwxr-x 1 apache apache 2 Dec 11 16:41 format* drwxrwxr-x 2 apache apache 4096 Dec 11 16:41 hooks/ drwxrwxr-x 2 apache apache 4096 Dec 11 16:41 locks/ -rwxrwxr-x 1 apache apache 229 Dec 11 16:41 README.txt*

  Read the article

• Is the master database backup crucial for restoring MS SQL server in the event where you have to res

  - by Imagineer

  I have been advise by Commvault partner support to turn off the backup of the master database as the backup failed due to the log file being lock. The following is the advise given: "The message is caused by Commvault’s inability to backup the master database’s transaction log. If this is happening intermittently its possible that something is locking the transaction log, preventing SQL iData agent from accessing the log. Typically the master database is just a template and is not used by any applications (applications that do require the use of an SQL database create their own) so there should be no harm in preventing it from being backed up You can do this by nominating NOT to back it up in the primary copy for the SQL data agent" The following is the error that I get. sqlxx SQL Server/ SQLxx N/A/ System DBs 19856* (CWE) Transaction Log N/A 01/08/2010 19:00:16 (01/08/2010 19:00:18 ) 01/08/2010 19:03:15 (01/08/2010 19:03:14 ) 1.44 MB 0:01:11 0.071 2 0 1 ITD014L2 Failure Reason: • ERROR CODE [30:325]: Error encountered during backup. Error: [ERROR: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot back up the log of the master database. Use BACKUP DATABASE instead. [Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP LOG is terminating abnormally.] Job Options:Create new index, Start new media, Backup all subclients, Truncation Log, Follow mount points , Backup files protected by system file protection , Stop DHCP service when backing up system state data, Stop WINS service when backing up system state data Associated Events: • 79714 [backupxx/JobManager] [01/08/2010 19:03:15 ]: Backup job [19856] completed. Client [sqlxx], Agent Type [SQL Server], Subclient [System DBs], Backup Level [Transaction Log], Objects [2], Failed [1], Duration [00:02:59], Total Size [1.44 MB], Media or Mount Path Used [ITD014L2]. • 79712 [sqlxx/SQLiDA] [01/08/2010 19:01:53 ]: Error encountered during backup. Error: [ERROR: [Microsoft][ODBC SQL Server Driver][SQL Server]Cannot back up the log of the master database. Use BACKUP DATABASE instead. [Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP LOG is terminating abnormally.] • 79711 [sqlxx/SQLiDA] [01/08/2010 19:01:51 ]: Query Result [[Microsoft][ODBC SQL Server Driver][SQL Server]Cannot back up the log of the master database. Use BACKUP DATABASE instead. [Microsoft][ODBC SQL Server Driver][SQL Server]BACKUP LOG is terminating abnormally.]. • 79707 [backupxx/JobManager] [01/08/2010 19:00:15 ]: New backup request received for Client [sqlxx], iDataAgent [SQL Server], Instance [SQLxx], Subclient [System DBs], Backup Level [Transaction Log]. Files failed to back up: • Backup Database[master] Failed Please advise, thank you.

  Read the article

• Mysql server fails to start

  - by Nicolas Thery

  Googling since two hours, I require your assistance. I'm on a Debian virtual machine and I cloned it. The only change is the new IP adress it has. Mysql doesn't start any more: Starting MySQL database server: mysqld . . . . . . . . . . . . . . failed! There is no process called mysql. All the mysql log files in /var/log are empty. here is my.cnf file : [client] port = 3306 socket = /var/run/mysqld/mysqld.sock [mysqld_safe] socket = /var/run/mysqld/mysqld.sock nice = 0 [mysqld] user = mysql pid-file = /var/run/mysqld/mysqld.pid socket = /var/run/mysqld/mysqld.sock port = 3306 basedir = /usr datadir = /var/lib/mysql tmpdir = /tmp language = /usr/share/mysql/english skip-external-locking bind-address = 127.0.0.1 key_buffer = 16M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP query_cache_limit = 1M query_cache_size = 16M general_log_file = /var/log/mysql/mysql.log log_bin = /var/log/mysql/mysql-bin.log expire_logs_days = 10 max_binlog_size = 100M [mysqldump] quick quote-names max_allowed_packet = 16M [mysql] [isamchk] key_buffer = 16M [mysqld_safe] syslog Here is the result of ifconfig : eth0 Link encap:Ethernet HWaddr 00:0c:29:12:98:9a inet adr:192.168.1.138 Bcast:192.168.1.255 Masque:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:754 errors:0 dropped:0 overruns:0 frame:0 TX packets:106 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:1000 RX bytes:101177 (98.8 KiB) TX bytes:17719 (17.3 KiB) lo Link encap:Boucle locale inet adr:127.0.0.1 Masque:255.0.0.0 adr inet6: ::1/128 Scope:Hôte UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:8 errors:0 dropped:0 overruns:0 frame:0 TX packets:8 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:560 (560.0 B) TX bytes:560 (560.0 B) As requested, here is the result of : sudo -u mysql mysqld, here is the result : root@debian:/home/nicolas/Bureau# sudo -u mysql mysqld 121004 14:26:57 [Note] Plugin 'FEDERATED' is disabled. mysqld: Can't find file: './mysql/plugin.frm' (errno: 13) 121004 14:26:57 [ERROR] Can't open the mysql.plugin table. Please run mysql_upgrade to create it. 121004 14:26:57 InnoDB: Initializing buffer pool, size = 8.0M 121004 14:26:57 InnoDB: Completed initialization of buffer pool 121004 14:26:57 InnoDB: Started; log sequence number 0 70822697 121004 14:26:57 [Note] Recovering after a crash using /var/log/mysql/mysql-bin 121004 14:26:57 [Note] Starting crash recovery... 121004 14:26:57 [Note] Crash recovery finished. 121004 14:26:57 [ERROR] mysqld: Can't find file: './mysql/host.frm' (errno: 13) 121004 14:26:57 [ERROR] Fatal error: Can't open and lock privilege tables: Can't find file: './mysql/host.frm' (errno: 13)

  Read the article

• VMWare tools not installing with an error

  - by JDS

  VMWare tools not installing on Ubuntu 12.04. I'm using Chef to manage the installation, but the Apt commands fail if run manually. I'm using the VMWare tool Debian repo. Example: $ cat /etc/apt/sources.list.d/vmware-tools-source.list deb http://packages.vmware.com/tools/esx/5.0u2/ubuntu precise main When trying to install, most packages seem to go ok, but one, "vmware-tools-foundation", does not. Example: $ apt-get -q -y install vmware-tools-esx-nox=8.6.10-1.precise Reading package lists... Building dependency tree... Reading state information... You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: vmware-tools-esx-kmods-3.2.0-23-generic : Depends: vmware-tools-foundation (>= 8.6.10) but it is not going to be installed vmware-tools-esx-nox : Depends: ...snip list of deps... E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). $ apt-get -f install Reading package lists... Done Building dependency tree Reading state information... Done Correcting dependencies... Done The following extra packages will be installed: vmware-tools-foundation The following NEW packages will be installed: vmware-tools-foundation 0 upgraded, 1 newly installed, 0 to remove and 118 not upgraded. 7 not fully installed or removed. Need to get 0 B/5,886 B of archives. After this operation, 86.0 kB of additional disk space will be used. Do you want to continue [Y/n]? y (Reading database ... 103499 files and directories currently installed.) Unpacking vmware-tools-foundation (from .../vmware-tools-foundation_8.6.10-1.precise_all.deb) ... VMware Tools cannot install because it appears that another installation of VMware Tools is already present. Please remove the previous installation and then attempt to install this copy of VMware Tools again. dpkg: error processing /var/cache/apt/archives/vmware-tools-foundation_8.6.10-1.precise_all.deb (--unpack): subprocess new pre-installation script returned error exit status 1 Errors were encountered while processing: /var/cache/apt/archives/vmware-tools-foundation_8.6.10-1.precise_all.deb E: Sub-process /usr/bin/dpkg returned an error code (1) The key seems to be this error: "VMware Tools cannot install because it appears that another installation of VMware Tools is already present. Please remove the previous installation and then attempt to install this copy of VMware Tools again." However, I've tryed removing and purging and can't seem to "trick" VMWare tools into thinking the packages are gone. Apt thinks they are gone. Is there some service/file/cache/lock left that VMWare tools sees that makes it think that VMWare tools are still installed? I've googled and googled but there is no answer to this question with my particular circumstances on the interwebs. VMWare's documentation of this error is minimal.

  Read the article

• What is consuming memory?

  - by Milan Babuškov

  Feel free to change the question title. I have a VPS with standard LAMP stack and a busy website. Operating system is CentOS 5.5. Virtualization is done with VMWare. My server gets real slow about every 6 hours. Logging into it I see that 1.6GB of RAM is consumed. However, listing the active processes does not explain the problem. Can anyone make any sense of this? "free" shows this: total used free shared buffers cached Mem: 2059456 2049280 10176 0 14780 380968 -/+ buffers/cache: 1653532 405924 Swap: 2096472 96 2096376 While this is output of "ps": [root@vmi29 /]# ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 10348 688 ? Rs Jun05 0:01 init [3] root 2 0.0 0.0 0 0 ? S< Jun05 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SN Jun05 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S< Jun05 0:00 [migration/1] root 5 0.0 0.0 0 0 ? SN Jun05 0:00 [ksoftirqd/1] root 6 0.0 0.0 0 0 ? S< Jun05 0:00 [migration/2] root 7 0.0 0.0 0 0 ? SN Jun05 0:00 [ksoftirqd/2] root 8 0.0 0.0 0 0 ? S< Jun05 0:00 [migration/3] root 9 0.0 0.0 0 0 ? SN Jun05 0:00 [ksoftirqd/3] root 10 0.0 0.0 0 0 ? S< Jun05 0:06 [events/0] root 11 0.0 0.0 0 0 ? S< Jun05 0:00 [events/1] root 12 0.0 0.0 0 0 ? S< Jun05 0:00 [events/2] root 13 0.0 0.0 0 0 ? S< Jun05 0:00 [events/3] root 14 0.0 0.0 0 0 ? S< Jun05 0:00 [khelper] root 31 0.0 0.0 0 0 ? S< Jun05 0:00 [kthread] root 38 0.0 0.0 0 0 ? S< Jun05 0:00 [kblockd/0] root 39 0.0 0.0 0 0 ? S< Jun05 0:00 [kblockd/1] root 40 0.0 0.0 0 0 ? S< Jun05 0:00 [kblockd/2] root 41 0.0 0.0 0 0 ? S< Jun05 0:00 [kblockd/3] root 42 0.0 0.0 0 0 ? S< Jun05 0:00 [kacpid] root 204 0.0 0.0 0 0 ? S< Jun05 0:00 [cqueue/0] root 205 0.0 0.0 0 0 ? S< Jun05 0:00 [cqueue/1] root 206 0.0 0.0 0 0 ? S< Jun05 0:00 [cqueue/2] root 207 0.0 0.0 0 0 ? S< Jun05 0:00 [cqueue/3] root 210 0.0 0.0 0 0 ? S< Jun05 0:00 [khubd] root 212 0.0 0.0 0 0 ? S< Jun05 0:00 [kseriod] root 302 0.0 0.0 0 0 ? S Jun05 0:00 [khungtaskd] root 303 0.0 0.0 0 0 ? S Jun05 0:00 [pdflush] root 304 0.0 0.0 0 0 ? S Jun05 0:01 [pdflush] root 305 0.0 0.0 0 0 ? S< Jun05 0:05 [kswapd0] root 306 0.0 0.0 0 0 ? S< Jun05 0:00 [aio/0] root 307 0.0 0.0 0 0 ? S< Jun05 0:00 [aio/1] root 308 0.0 0.0 0 0 ? S< Jun05 0:00 [aio/2] root 309 0.0 0.0 0 0 ? S< Jun05 0:00 [aio/3] root 515 0.0 0.0 0 0 ? S< Jun05 0:00 [kpsmoused] root 582 0.0 0.0 0 0 ? S< Jun05 0:00 [mpt_poll_0] root 583 0.0 0.0 0 0 ? S< Jun05 0:00 [mpt/0] root 584 0.0 0.0 0 0 ? S< Jun05 0:00 [scsi_eh_0] root 590 0.0 0.0 0 0 ? S< Jun05 0:00 [ata/0] root 591 0.0 0.0 0 0 ? S< Jun05 0:00 [ata/1] root 592 0.0 0.0 0 0 ? S< Jun05 0:00 [ata/2] root 593 0.0 0.0 0 0 ? S< Jun05 0:00 [ata/3] root 594 0.0 0.0 0 0 ? S< Jun05 0:00 [ata_aux] root 610 0.0 0.0 0 0 ? S< Jun05 0:00 [kstriped] root 631 0.0 0.0 0 0 ? S< Jun05 0:05 [kjournald] root 656 0.0 0.0 0 0 ? S< Jun05 0:00 [kauditd] root 689 0.0 0.0 13364 928 ? S<s Jun05 0:00 /sbin/udevd -d root 2123 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpathd/0] root 2124 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpathd/1] root 2126 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpathd/2] root 2127 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpathd/3] root 2128 0.0 0.0 0 0 ? S< Jun05 0:00 [kmpath_handlerd] root 2203 0.0 0.0 0 0 ? S< Jun05 0:00 [kjournald] root 2613 0.0 0.0 5908 648 ? Ss Jun05 0:00 syslogd -m 0 root 2617 0.0 0.0 3804 424 ? Ss Jun05 0:00 klogd -x root 2707 0.0 0.0 10760 372 ? Ss Jun05 0:02 irqbalance apache 2910 0.5 0.6 213964 12912 ? S 00:22 0:07 /usr/sbin/httpd dbus 3011 0.0 0.0 21256 904 ? Ss Jun05 0:00 dbus-daemon --system root 3025 0.0 0.0 3800 576 ? Ss Jun05 0:00 /usr/sbin/acpid 68 3038 0.0 0.2 31152 4336 ? Ss Jun05 0:01 hald root 3039 0.0 0.0 21692 1176 ? S Jun05 0:00 hald-runner 68 3046 0.0 0.0 12324 856 ? S Jun05 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.s 68 3052 0.0 0.0 12324 856 ? S Jun05 0:00 hald-addon-keyboard: listening on /dev/input/event0 root 3105 0.0 0.0 62624 1212 ? Ss Jun05 0:00 /usr/sbin/sshd root 3264 0.0 0.0 74820 1156 ? Ss Jun05 0:00 crond root 3292 0.0 0.0 18416 472 ? S Jun05 0:00 /usr/sbin/smartd -q never root 3300 0.0 0.0 3792 480 tty2 Ss+ Jun05 0:00 /sbin/mingetty tty2 root 3301 0.0 0.0 3792 480 tty3 Ss+ Jun05 0:00 /sbin/mingetty tty3 root 3302 0.0 0.0 3792 484 tty4 Ss+ Jun05 0:00 /sbin/mingetty tty4 root 3304 0.0 0.0 3792 480 tty5 Ss+ Jun05 0:00 /sbin/mingetty tty5 root 3306 0.0 0.0 3792 480 tty6 Ss+ Jun05 0:00 /sbin/mingetty tty6 apache 5158 0.4 0.5 211896 11848 ? S 00:28 0:04 /usr/sbin/httpd apache 5519 0.4 0.5 211896 11992 ? S 00:29 0:03 /usr/sbin/httpd root 5649 0.0 0.0 63848 1184 pts/0 S Jun05 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --soc mysql 5696 2.1 1.9 411060 40392 pts/0 Rl Jun05 2:01 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql apache 5943 0.4 0.5 211896 12000 ? S 00:30 0:03 /usr/sbin/httpd apache 5976 0.6 0.5 211896 11792 ? S 00:30 0:04 /usr/sbin/httpd apache 6073 0.4 0.5 211896 11208 ? S 00:31 0:03 /usr/sbin/httpd apache 6122 0.4 0.5 211896 11848 ? S 00:31 0:03 /usr/sbin/httpd apache 6128 0.3 0.5 211896 11940 ? S 00:31 0:02 /usr/sbin/httpd apache 6159 0.5 0.5 211896 11872 ? S 00:31 0:04 /usr/sbin/httpd apache 6636 0.4 0.6 213960 13444 ? S 00:32 0:02 /usr/sbin/httpd apache 6787 0.3 0.5 211884 11308 ? S 00:33 0:02 /usr/sbin/httpd apache 6796 0.4 0.5 211884 12024 ? S 00:33 0:02 /usr/sbin/httpd apache 6801 0.3 0.5 211896 11920 ? S 00:33 0:01 /usr/sbin/httpd apache 6804 0.4 0.5 211884 11848 ? S 00:33 0:02 /usr/sbin/httpd apache 6825 0.4 0.5 211896 11972 ? S 00:33 0:02 /usr/sbin/httpd apache 6866 0.3 0.5 210860 11044 ? S 00:33 0:01 /usr/sbin/httpd apache 6870 0.2 0.5 211896 11108 ? S 00:33 0:01 /usr/sbin/httpd apache 6872 0.3 0.5 211896 11900 ? S 00:33 0:01 /usr/sbin/httpd apache 6993 0.3 0.5 211896 11836 ? S 00:33 0:02 /usr/sbin/httpd apache 6994 0.3 0.5 211896 11792 ? S 00:33 0:01 /usr/sbin/httpd apache 7136 0.2 0.5 211896 11432 ? S 00:34 0:01 /usr/sbin/httpd apache 7143 0.2 0.5 210860 11052 ? S 00:34 0:01 /usr/sbin/httpd apache 7145 0.2 0.5 211896 11136 ? S 00:34 0:01 /usr/sbin/httpd apache 7266 0.2 0.6 213952 12748 ? S 00:34 0:01 /usr/sbin/httpd apache 7299 0.2 0.5 211884 11276 ? S 00:34 0:01 /usr/sbin/httpd apache 7311 0.2 0.5 211884 11300 ? S 00:34 0:01 /usr/sbin/httpd apache 7313 0.3 0.5 211884 11876 ? S 00:34 0:01 /usr/sbin/httpd apache 7345 0.2 0.5 210872 11100 ? S 00:34 0:01 /usr/sbin/httpd apache 7349 0.2 0.5 210860 11008 ? S 00:34 0:01 /usr/sbin/httpd apache 7350 0.2 0.5 211896 11832 ? S 00:34 0:01 /usr/sbin/httpd apache 7351 0.1 0.5 211884 11072 ? S 00:34 0:00 /usr/sbin/httpd apache 7352 0.2 0.5 210872 11096 ? S 00:34 0:01 /usr/sbin/httpd apache 7449 0.1 0.5 210860 11020 ? S 00:35 0:00 /usr/sbin/httpd root 7490 0.3 0.0 0 0 ? S Jun05 3:11 [vmmemctl] root 7597 0.0 0.0 72656 1260 ? Ss Jun05 0:06 /usr/lib/vmware-tools/sbin64/vmware-guestd --background /va apache 7720 0.1 0.5 210860 10748 ? S 00:36 0:00 /usr/sbin/httpd apache 7726 0.1 0.4 209836 9304 ? R 00:36 0:00 /usr/sbin/httpd apache 7727 0.1 0.5 210860 10916 ? S 00:36 0:00 /usr/sbin/httpd apache 7731 0.1 0.5 210860 10780 ? S 00:36 0:00 /usr/sbin/httpd apache 7732 0.3 0.5 210860 10916 ? S 00:36 0:01 /usr/sbin/httpd apache 7733 0.1 0.5 210872 11000 ? S 00:36 0:00 /usr/sbin/httpd apache 7735 0.1 0.5 211884 11048 ? S 00:36 0:00 /usr/sbin/httpd apache 7761 0.1 0.5 210860 10552 ? S 00:36 0:00 /usr/sbin/httpd apache 7776 0.1 0.4 209836 8648 ? R 00:37 0:00 /usr/sbin/httpd apache 7790 0.2 0.3 208812 7724 ? R 00:40 0:00 /usr/sbin/httpd apache 7800 0.2 0.3 208812 8088 ? R 00:40 0:00 /usr/sbin/httpd root 7801 0.0 0.0 3792 484 tty1 Ss+ 00:41 0:00 /sbin/mingetty tty1 apache 7820 0.2 0.3 208812 7552 ? R 00:41 0:00 /usr/sbin/httpd apache 7834 0.2 0.3 207788 6756 ? R 00:42 0:00 /usr/sbin/httpd apache 7864 0.2 0.2 207788 6148 ? R 00:42 0:00 /usr/sbin/httpd apache 7872 0.3 0.2 207788 5856 ? R 00:43 0:00 /usr/sbin/httpd apache 7874 2.5 0.3 207788 6336 ? R 00:43 0:00 /usr/sbin/httpd root 7875 0.3 0.0 63844 1056 ? S 00:43 0:00 sh -c lsb_release -sd 2>/dev/null root 7879 1.6 0.0 65604 964 pts/0 R+ 00:43 0:00 ps aux root 16316 0.0 0.1 90128 3272 ? Ss Jun05 0:00 sshd: milanb [priv] milanb 16358 0.0 0.0 90128 1752 ? S Jun05 0:00 sshd: milanb@pts/0 milanb 16360 0.0 0.0 66076 1480 pts/0 Ss Jun05 0:00 -bash root 16875 0.0 0.0 101068 1324 pts/0 S Jun05 0:00 su - root 16877 0.0 0.0 66184 1692 pts/0 S Jun05 0:00 -bash root 24373 0.0 0.3 206764 7348 ? Rs Jun05 0:01 /usr/sbin/httpd

  Read the article

• How to properly shutdown a Linux VMware Server Host

  - by Mikee

  Hi Everybody: In our lab, we have a server running Ubuntu Linux 8.04.4 x64, with VMware Server 2.1 hosting 4 VM's. I have a major concern with regards to shutting down the host server. Mostly, how do I ensure that the guest VM's are being shut down safely? In the VMware web interface console, I have enabled: "Allow virtual machines to start and stop automatically with the system" I enabled the Default Startup Delay for 15 seconds along with the "Start next VM immediately if the VMware Tools start" option checked I enabled the Default Shutdown Delay with a 60 second shutdown delay and a Shutdown Action of "Shut Down Guest" All VM's have the VMware Tools installed and properly working. All VM's are moved up into the "Specified Order" section of "Startup Order", thus when powering the server back on, all those VM's should start up again in that specified order. When I went to shut down the server, I used the shutdown -h now command. Based on the settings I entered above, I was expecting a 4 minute shutdown, as there is an option to delay the shutdown of each VM by 60 seconds. However, that is not what happened. Instead, the server shutdown in under a minute. When I powered the server back on, only 2 VM's properly loaded. The other 2 showed the following error: "Power on Virtual Machine" failed to complete If these problems problems persist, please contact your system administrator. Details: Cannot open the disk '[location to .vmdk]' or one of the snapshot disks it depends on. Reason: Failed to lock the file. Obviously, if this error occured, then it is clear to me that the VM's were not properly shutdown, or the server powered off before the VM's were completely shutdown. I have fixed the above error by deleting the .lck files in the respective VM directories. How would I know if the VM's were properly shut down? I checked the VMware-server logs, but they only seem to display the logs of when the vmware-mgmt service is running in the current session. I'm mostly running Linux VM's, so is there an easy way to know whether or not a server was properly shut down in Linux? Thank you all for the help!

  Read the article

• Starting/Stopping Custom PHP Chat Server Linux Service (CentOS)

  - by chad

  I have been trying all night to get this service working properly. I created this script from a template and am very new to bash coding. I wrote a fully functioning chat server in php which runs endlessly, but now want to make it a dedicated service. I want to do this so that it starts on server boot and boots back up if possible when there are any down-times with the server. The issue is that I need this thing to run in a detached screen so that I can monitor packet data or send server commands via SSH when need-be. The main problem that i'm having is that it needs to have its own PID when it starts so that I can stop/restart it when needed. I am the type who grinds on coding until I figure it out, but this is so new to me that it seems the learning curve here is very steep and frustrating. Below is my code if anybody can please help me with this one, i've gotten so tired I can't even concentrate any more :( #!/bin/sh # # chatserver # # chkconfig: 345 20 90 # description: chatServer Linux Service Daemon \ # for general server handling ### BEGIN INIT INFO # Provides: chatserver # Required-Start: $local_fs $network $named $syslog # Required-Stop: $local_fs $syslog # Default-Start: 3 4 5 # Default-Stop: 0 1 2 6 # Short-Description: This service maintains the chatServer # Description: chatServer Linux Service Daemon # for general server handling ### END INIT INFO # Source function library. . /etc/rc.d/init.d/functions exec="screen php -q /var/www/html/chatServer.php" prog="chatserver" config="/etc/sysconfig/$prog" pidfile="/var/run/chatserver.pid" [ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog lockfile=/var/lock/subsys/$prog start() { #$exec || exit 5 echo -n $"Starting $prog: " daemon $exec --name=$exec --pidfile=$pidfile retval=$? echo [ $retval -eq 0 ] && touch $lockfile return $retval } stop() { echo -n $"Stopping $prog: " killproc -p $pidfile rm -f $pidfile retval=$? echo [ $retval -eq 0 ] && rm -f $lockfile return $retval } restart() { stop start } reload() { restart } force_reload() { restart } rh_status() { # run checks to determine if the service is running or use generic status status $prog } rh_status_q() { rh_status >/dev/null 2>&1 } case "$1" in start) rh_status_q && exit 0 $1 ;; stop) rh_status_q || exit 0 $1 ;; restart) $1 ;; reload) rh_status_q || exit 7 $1 ;; force-reload) force_reload ;; status) rh_status ;; condrestart|try-restart) rh_status_q || exit 0 restart ;; *) echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}" exit 2 esac exit $?

  Read the article

• Mongodb: why is my mongo server using two PID's?

  - by Lucas

  I started my mongo with the following command: [lucas@ecoinstance]~/node/nodetest2$ sudo mongod --dbpath /home/lucas/node/nodetest2/data 2014-06-07T08:46:30.507+0000 [initandlisten] MongoDB starting : pid=6409 port=27017 dbpat h=/home/lucas/node/nodetest2/data 64-bit host=ecoinstance 2014-06-07T08:46:30.508+0000 [initandlisten] db version v2.6.1 2014-06-07T08:46:30.508+0000 [initandlisten] git version: 4b95b086d2374bdcfcdf2249272fb55 2c9c726e8 2014-06-07T08:46:30.508+0000 [initandlisten] build info: Linux build14.nj1.10gen.cc 2.6.3 2-431.3.1.el6.x86_64 #1 SMP Fri Jan 3 21:39:27 UTC 2014 x86_64 BOOST_LIB_VERSION=1_49 2014-06-07T08:46:30.509+0000 [initandlisten] allocator: tcmalloc 2014-06-07T08:46:30.509+0000 [initandlisten] options: { storage: { dbPath: "/home/lucas/n ode/nodetest2/data" } } 2014-06-07T08:46:30.520+0000 [initandlisten] journal dir=/home/lucas/node/nodetest2/data/ journal 2014-06-07T08:46:30.520+0000 [initandlisten] recover : no journal files present, no recov ery needed 2014-06-07T08:46:30.527+0000 [initandlisten] waiting for connections on port 27017 It appears to be working, as I can execute mongo and access the server. However, here are the process running mongo: [lucas@ecoinstance]~/node/testSite$ ps aux | grep mongo root 6540 0.0 0.2 33424 1664 pts/3 S+ 08:52 0:00 sudo mongod --dbpath /ho me/lucas/node/nodetest2/data root 6541 0.6 8.6 522140 52512 pts/3 Sl+ 08:52 0:00 mongod --dbpath /home/lu cas/node/nodetest2/data lucas 6554 0.0 0.1 7836 876 pts/4 S+ 08:52 0:00 grep mongo As you can see, there are two PID's for mongo. Before I ran sudo mongod --dbpath /home/lucas/node/nodetest2/data, there were none (besides the grep of course). How did my command spawn two PID's, and should I be concerned? Any suggestions or tips would be great. Additional Info In addition, I may have other issues that might suggest a cause. I tried running mongo with --fork --logpath /home/lucas..., but it did not work. More information below: [lucas@ecoinstance]~/node/nodetest2$ sudo mongod --dbpath /home/lucas/node/nodetest2/data --fork --logpath /home/lucas/node/nodetest2/data/ about to fork child process, waiting until server is ready for connections. forked process: 6578 ERROR: child process failed, exited with error number 1 [lucas@ecoinstance]~/node/nodetest2$ ls -l data/ total 163852 drwxr-xr-x 2 mongodb nogroup 4096 Jun 7 08:54 journal -rw------- 1 mongodb nogroup 67108864 Jun 7 08:52 local.0 -rw------- 1 mongodb nogroup 16777216 Jun 7 08:52 local.ns -rwxr-xr-x 1 mongodb nogroup 0 Jun 7 08:54 mongod.lock -rw------- 1 mongodb nogroup 67108864 Jun 7 02:08 nodetest1.0 -rw------- 1 mongodb nogroup 16777216 Jun 7 02:08 nodetest1.ns Also, my db path folder is not the original location. It was originally created under the default /var/lib/mongodb/ and moved to my local data folder. This was done after shutting down the server via /etc/init.d/mongod stop. I have a Debian Wheezy server, if it matters.

  Read the article

< Previous Page | 400 401 402 403 404 405 406 407 408 409 410 411  | Next Page >