Search Results

Search found 18845 results on 754 pages for 'the machine charmer'.

Page 409/754 | < Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >

• Hard disk with bad clusters

  - by Dan

  I have been trying to backup some files up to DVD recently, and the burn process failed saying the CRC check failed for certain files. I then tried to browse to these files in Windows explorer and my whole machine locks up and I have to reboot. I ran check disk without the '/F /R' arguments and it told me I had bad sectors. So I re-ran it with the arguments and check disk fails during the 'Chkdsk is verifying usn journal' stage with this error: Insufficient disk space to fix the usn journal $j data stream The hard disk is a 300GB Partition on a 400GB Disk, and there is 160GBs of free space on the partition. My os (Windows 7) is installed on the other partition and is running fine. Any idea how I fix this? or repair it enough to copy my files off it?

  Read the article

• HP D530 Startup Error: 512 - Chassis Fan Not Detected

  - by lyrikles

  I'm using the HP D530 Motherboard/CPU that I installed in a new case with a 600W PSU. There was a problem with the onboard chassis fan connector (3-wire) not supplying sufficient power to the chassis fan indicated by the fan spinning very slowly, but I never experienced the "512 Error" at boot. Also, the same fan works perfectly connected directly to the PSU. I disconnected it since I already have plenty of fans connected via the PSU directly. Since then, on startup, I get the error: "512 - Chassis Fan Not Detected" and am asked to "Press F1 to continue". This gets quite annoying since I use this machine remotely (w/ FreeNAS). What could be causing the onboard fan connector to not be giving enough power? If this is unable to be corrected, how can I make the BIOS think there's a chassis fan plugged in without actually plugging a fan into the onboard connector? Would it be possible to jumper the pins without damaging the motherboard or PSU? Thanks,Erik

  Read the article

• Wireless not working on XP (with Intel® PRO/Wireless 2200BG Network Connection card and Zyxel router

  - by JohnIdol

  Hi all, I just got a new router, cant' get my old xp laptop (Toshiba Satellite) to connect to it, no matter if it's WPA-PSK or WEP (I was kind of thinking with WEP it would've worked but it doesn't). When I go connect and put in credentials the dialog stays up for a few minutes then disappears with no message and no connection is established. Here's the spec of router and wireless card: Wilreless card: Intel® PRO/Wireless 2200BG Network Connection Router: Zyxel P-660-HW-T1 v3 Everything works fine on my Vista machine (for once). Any help appreciated!

  Read the article

• Vmconnect.exe on Windows7

  - by Xiuhtecuhtli

  I running Windows Server 2008 w/Hyper-V. The Network properly works and I can access the VM's From a Hyper-V enabled 2008 Machine. No problems there. BUT... I want to be able to connect to my Guest Machines from my Windows7 Pro Laptop. I was hoping it would be simular to copy/pasting VMCONNECT.EXE to my sys32 folder. But.. It Failed saying i did not have the proper feature installed. My Question to the Guru's of SuperUser, Is their a way to run VMCONNECT.EXE from a Windows7 client?

  Read the article

• SSH server not working (respawns until stopped)

  - by Khaled

  I have a running Ubuntu Server 10.04.1. When I tried to login to the server via ssh, I could not. Instead, I got connection refused error. I tried to ping the machine and I got reply! So, the clear reason is that SSH daemon is stopped. After reboot, I was able to login to my server via ssh. After some time, I looked at my logs /var/log/syslog and found the following records: Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2465) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2469) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2473) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2477) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2481) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2485) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2489) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2493) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2497) terminated with status 255 Jan 16 10:57:09 myserver init: ssh main process ended, respawning Jan 16 10:57:09 myserver init: ssh main process (2501) terminated with status 255 Jan 16 10:57:09 myserver init: ssh respawning too fast, stopped I searched for a similar problem/solution. Some people said that this is caused by the SSH daemon trying to start before networking and they suggest to change ListenAddress in /etc/ssh/sshd_config to be 0.0.0.0. I think this is not the cause in my case, because my problem occurs after system is up and running. Any idea what is causing this? This is Ubuntu Server and it should be running and accessed remotely using SSH.

  Read the article

• VAMT 3.0 Proxy Activate - No ‘Apply Confirmation ID’ option at all

  - by lez

  I tried to activate my windows box in isolated network zone, so I followed the process of 'Scenario 2: Proxy Activation' in http://technet.microsoft.com/en-us/library/hh825202.aspx using two VAMT 3.0 hosts. Everything went fine (actually I'm not sure what option to choose when exporting VAMT data to .cilx file, I tried 'Export products and product keys' and 'Export proxy activation data only' anyway, is this a cause of this problem, I have no idea), until I wanted to apply the CID and activate the isolated pc. In 'Activate', there is no 'Apply Confirmation ID' option!, its only options are 'Acquire and save confirmation ID only' and 'Acquire confirmation ID, apply to selected machine(s) and activate'. The error message is 'cannot resolve remote name 'go.microsoft.com'' when I chose any of them, looks like acquire confirmation id always need to go to this url. But I just want to apply cid... Has anyone run into this, please? I searched internet, seems no answer... Any suggestion would be appreciated, thank you!

  Read the article

• Sage 50 Accounts 2010 wont run on windows 7

  - by admintech

  I have sucessfuly installed Sage 50 Accounts 2010 onto my 32 bit Windows 7 machine, yet whenever i try to run it i encounter - Log Name: Application Source: Application Error Date: 24/05/2010 17:14:13 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User: N/A Computer: LukeThomas-PC.domain.co.uk Description: Faulting application name: Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe, version: 2.0.0.91, time stamp: 0x4a8c22fe Faulting module name: igdumd32.dll, version: 8.15.10.1872, time stamp: 0x4a848a05 Exception code: 0xc0000409 Fault offset: 0x00012f96 Faulting process id: 0x1778 Faulting application start time: 0x01cafb5c2493b609 Faulting application path: C:\Program Files\Common Files\Sage SBD\Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe Faulting module path: C:\Windows\system32\igdumd32.dll Report Id: 63e2246b-674f-11df-96ba-002564c97988 Event Xml: 1000 2 100 0x80000000000000 5062 Application LukeThomas-PC.domain.co.uk Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe 2.0.0.91 4a8c22fe igdumd32.dll 8.15.10.1872 4a848a05 c0000409 00012f96 1778 01cafb5c2493b609 C:\Program Files\Common Files\Sage SBD\Sage.SBD.Platform.Installation.SoftwareUpdates.UI.exe C:\Windows\system32\igdumd32.dll 63e2246b-674f-11df-96ba-002564c97988 Any help would be appreciated as i cant find anything about this error

  Read the article

• Share openVPN connection

  - by Douglas Gemignani

  Hello, Currently I have a server (dev tun) running openVPN and my WinXP client is able to connect to the server just fine. I have an ethernet device and I need to send data to a computer under the server's network, so since the device can't connect on its own I need to configurate my Windows XP to share its VPN connection. So, on my WinXP machine i have: Network Adapter #1 (ip 192.168.0.2 gw 192.168.0.1 with internet access). OpenVPN Connection (dhcp). Network Adapter #2 (crossover cable with device). Here is my client.ovpn cert gertec.crt key gertec.key client ns-cert-type server user nobody group nobody remote IP PORT ca ca.crt dev tun dev-node OpenVPN proto udp resolv-retry infinite nobind comp-lzo verb 3 I would appreciate any help.

  Read the article

• How to blacklist a problem Wi-Fi access point by MAC address in Mac OS X

  - by Sam Alexander

  So I am a small Mac-user cog in a larger Windows-based network machine. The network here works fine for most everyone else (on PCs), but I have random timeouts and issues with the Wi-Fi. Luckily, I have identified a few problem access points by MAC address (via their log messages in Console.app). Is it possible to tell my AirPort on my Macbook to avoid those access points, and only speak with the access points who are far less touchy about me drinking the Apple kool-aid? All of the points are on the same network SSID.

  Read the article

• Correct PHP5 DLL for Apache 2.2?

  - by Nathan Long

  I have installed Apache 2.2.14 (Win32) on a Windows XP machine and am trying to add the latest PHP module. I downloaded the ZIP file from here labeled "VC9 x86 Non Thread Safe" and extracted to my Apache directory. I then copied php5.dll to Apache's bin directory and copied php.ini to C:\Windows. In httpd.conf, I added these lines: LoadModule php5_module "C:/Program Files/Apache Software Foundation/Apache2.2/bin/php5.dll" AddType application/x-httpd-php .php Now Apache will not start. error.log says this: "Can't locate API module structure php5_module in file C:/Program Files/Apache Software Foundation/Apache2.2/bin/php5.dll": No error" I think I may have the wrong .dll file, because I found tutorials that use the filename php5apache2.dll and I didn't see that in the PHP package I got. Also, I have seen references to a file called php5ts.dll, but I don't see that either. What exactly do I need to make PHP5 work?

  Read the article

• Kernel Panic on VMware Workstation 7.1.3

  - by i.h4d35

  I've been trying to install either Arch Linux or Fedora 17 on VMWare Workstation (7.1.3). After I point to the right ISO image, I get the following error: Booting the kernel PANIC: early exception 0d rip:ffffffff81042dc4 error 0 cr2 0 I am trying to install it on a machine which has a 3rd generation i5 processor. After checking A VMWare panic early exception fix for ivy bridge i3, i5, i7, I tried to turn off the nosmep acpi. This is around, I get the same error but at a different address. Apparently, others have faced this issue before. Thanks in advance.

  Read the article

• VirtualBox error VERR_SUPDRV_COMPONENT_NOT_FOUND

  - by ant2009

  I am using Fedora 12, with kernel stv-fedora 2.6.31.12-174.2.22.fc12.i686 I have install VirtualBox OSE v3.1.4-1.fc12. When I start VirtualBox I get the following error: Failed to start the virtual machine WinXP32. Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). However, if I run /etc/init.d/vboxdrv setup I get this error: -bash: /etc/init.d/vboxdrv: No such file or directory How do I get rid of the error and run VirtualBox?

  Read the article

• Can't install SQL Express 2008R2- caspol.exe application error - the application failed to initialize

  - by Nir

  I'm trying to install SQL Server Express 2008 R2 on Windows 2003 Server (enterprise edition). I get the following error message: Title: caspol.exe - Application Error Text: The application failed to initialize properly (0x000007b), Click on OK to terminate the application. I get the same error message both when downloading the installer and running it and when using the web platform installer. All the pages on the internet I've found about similar problem say it's a corrupt .net installation issue - This server runs multiple .net apps and I've never had any problems with any of them. I've uninstalled and reinstalled .net (causing a painful outage) and nothing changed. Does anyone here has any idea what might cause this? Update 1: additional information I forgot to include: 32bit version of Windows running in a virtual machine, no anti virus Update 2: when running caspol.exe from the command line I get the same error

  Read the article

• Creating a DNS Server

  - by c.adhityaa

  OK, I am a complete newbie to all this, so please bear with me. I want to create a DNS Server (like Google does - 8.8.8.8). I understand that a DNS Server is a Server that gives a IP on being given a hostname, ie. when I ask it what is the IP of google.com, it says "64.233.160.0". So, what I want to do is create a similar one that holds records of what translates to what. I thought of this since it looks to be similar to a webserver - ask for a page and it gives back the page. That is, when my machine has the IP xxx.xxx.xxx.xxx and people chose xxx.xxx.xxx.xxx as their Primary DNS Server, then when they ask "www.google.com", I sould be able to tell "64.233.160.0". So, how do I create this DNS Server that is accessible to everyone in the world ? It would be easier if we have something like EasyPHP which is the analogue to a webserver here. I am sorry if I have caused any trauma because this might seem rubbish to experts ;) Adhityaa

  Read the article

• PSExec on Windows 2008 R2 Failing "Network name cannot be found"

  - by Adam Frisby

  Hi, We've got a bunch of remote admin scripts which rely on psexec and they do not appear to be working over the network on our new 2008 hosts. An error dump is below: C:\Users\<user>\Desktop\PsTools> psexec \\<host IP> -u Administrator -p <pass> <cmd> PsExec v1.97 - Execute processes remotely Copyright (C) 2001-2009 Mark Russinovich Sysinternals - www.sysinternals.com Couldn't access <host IP>: The network name cannot be found. Make sure that the default admin$ share is enabled on <host IP>. We've tried both the machine name and the IP address in with the same results. The same command has worked previously with our Win2K3 hosts - so we're presuming it is some form of security change between the 2003 and 2008R2. Anyone have any clues?

  Read the article

• Crash when attempting to install 32bit delphi service on 2008 r2

  - by Oded

  I have an old 32bit delphi application (with no source code), that is used as a windows service. It runs fine on windows 2003 32bit. I do not know if it has been created as a service originally, or converted to one later on. It is supposed to get installed to the server using a /install flag on the command line. When attempting to install it on a Windows 2008 R2 virtual machine, I am getting an APPCRASH event in the event log. The service is supposed to read a blob from a remote SQL Server instance and write it out to the local HD. It also reads some initialization data from the registry. Is there any way I can install this application as a service on windows 2008 r2 64bit? If not, are there any workarounds I can try? What are your suggestions?

  Read the article

• Trying to make a custom Arch-based Linux distro with larch

  - by strangeronyourtrain

  I'm all set up with a spiffy Arch installation in a virtual machine, and now I want to turn it into a live ISO. When I heard about larch, I thought it would be the perfect tool to turn my existing installation into something I could distribute. However, I can't get larch to install properly. I followed the installation instructions on the website, which said to download and run the larch-setup script. When I run it, though, it installs the larch profiles and libraries but doesn't install the executable programs. Here's a screenshot of the errors I get when larch-setup tries to install the executables. I'd greatly appreciate any clues to what is going wrong here, or suggestions for alternative ways to turn my customized Arch installation into an ISO! Thanks!

  Read the article

• Why does tracerpt use up all of my Sql Server's memory?

  - by Cypher

  We have a MS Sql Server 2008 machine with 12 GB of RAM... twice now within the last week this server was knocked on its backside by a process called "tracerpt.exe" which was found to have taken up ALL of the system's memory and leaving nothing for sqlserver. Done my homework, figured out what this program is... but still no idea why it's hogging up so much RAM (though I have an idea), nor what application is actually executing it. This server is the back-end to a Microsoft Dynamics CRM 4.0 application which is hosted on a separate server and is our production database used for just about everything. If this program is necessary, I would like to be able to find the application that is executing this thing and remove it or disable whatever feature is causing this quite annoying occurrence. Any ideas?

  Read the article

• Windows 7 Windows XP mode cannot run - it says "Require Hardware Assisted Virtualization"

  - by Jian Lin

  After installing the 2 files for Windows 7 Windows XP mode, the Start Menu now has Windows Virtual PC Windows XP Mode but clicking on the first merely brings out a folder, and clicking on the second brings out a dialog box that says: "Require Hardware Assisted Virtualization" Does that mean the machine cannot support Windows 7 Windows XP mode? I am running Win 7 Ultimate 64 bit edition. This is the dialog box: Update: the computer is an HP TouchSmart, with American Megatrends BIOS v02.61. I looked into the BIOS set up but it is quite simple and dosen't have something for "hardware assisted virtualization". The CPU is Intel Core 2 Duo T5750.

  Read the article

• Debugging JuniperSetupClientInstaller.exe Problems

  - by Damon

  I recently moved from Windows 7 to Windows 2008 server so I can run SharePoint on my physical machine and not through a VPC, so I've been trying to get everything re-installed on my system.  As part of that process, I tried re-establishing a connection back to one of client's corporate networks and their system prompted me to run JuniperSetupClientInstaller.exe.  Normally this runs, finishes, and you can connect to the VPN no problem.  This time, however, it failed.  Unfortunately, there were no error messages to let me know why - it just didn't work. I've had success running application in "compatability mode" so I gave that a shot - same problem.  But during the installation I noticed that JuniperSetupClientInstaller.exe unpacks a number of files into a directory (you can see the exact location in the details of the installer) and then runs a DIFFERENT application - JuniperSetupClient.exe.  If you navigate to that directory, you will see a text file named JuniperSetupClient.log that contains information about the setup process. In my case, I installed a SharePoint site on Port 3333 - which the Juniper software needs to communicate with the VPN.  There was a nice message in the log file saying the VPN software could not bind to port 3333 which quickly alerted me to the issue, and moving the site off that port number fixed the issue.  However, it would have been nice to had an error message of sorts because I spent a chunk of time futilely researching compatibility issues. 

  Read the article

• Help me choose a desktop: which of these two should I buy?

  - by Sammy

  I just want the more powerful of the two: Choice 1: http://www.bestbuy.com/site/Gateway+-+Desktop+with+AMD+Phenom%26%23153%3B+II+Quad-Core+Processor/9698936.p?id=1218153428687&skuId=9698936 Choice 2: /site/HP+-+Pavilion+Desktop+with+AMD+Phenom%26%23153%3B+II+Quad-Core+Processor/9694506.p?id=1218150609828&skuId=9694506 I can't post more than one hyperlink since I am a new user, so please add bestbuy domain name before choice 2. The latter choice is a bit more expensive but not by much so I don't care about that. As for what I intend to use my machine for, just regular web surfing, light gaming, web development related work, etc. But that doesn't really matter, of these two I just want to know which is the better more powerful system and which you would buy if you were in my position.

  Read the article

• Oracle VM and JRockit Virtual Edition: Oracle Introduces Java Virtualization Solution for Oracle(R)

  - by adam.hawley

  Since the beginning, we've been talking to customers about how our approach to virtualization is different and more powerful than any other company because Oracle has the "full-stack" of software (and even hardware these days!) to work with to create more comprehensive, more powerful solutions. Having the virtualization layer, two enterprise class operating systems in Solaris and Enterprise Linux, and the leading enterprise software in nearly every layer of the data center stack, allows us to not just do virtualization for virtualization's sake but rather to provide complete virtualization solutions focused on making enterprise software easier to deploy, easier to manage, and easier to support through integration up and down the stack. Today, we announced the availability of a significant demonstration of that capability by announcing a WebLogic Suite option that permits the Oracle WebLogic Server 11g to run on a Java JVM (JRockit Virtual Edition) that itself runs directly on the Oracle VM Server for x86 / x64 without needing any operating system. Why would you want that? Better performance and better consolidation density, not to mention great security due to a lower "attack surface area". Oracle also announced the Oracle Virtual Assembly Builder product. Oracle Virtual Assembly Builder provides a framework for automatically capturing the configuration of existing software components and packaging them as self-contained building blocks known as appliances. So you know that complex application you've tweaked on your physical servers (or on other virtual environments for that matter)?  Virtual Assembly Builder will allow the automated collection of all the configuration data for the various application components that make up that multi-tier application and then use the information to create and package each component as a virtual machine so that the application can be deployed in your Oracle VM virtualization environment quickly and easily and just as it was configured it in your original environment. A slick, drag-and-drop GUI also serves as a powerful, intuitive interface for viewing and editing your assembly as needed.No one else can do complete virtualization solutions the way Oracle can and I think these offerings show what's possible when you have the right resources for elegantly solving the larger problems in the data center rather than just having to make-do with tools that are only operating at one layer of the stack. For more information, read the press release including the links to more information on various Oracle websites.

  Read the article

• Redirect TS Gateway Authentication to RADIUS Server

  - by Brent

  Hi All, I'm trying to set up an environment for my TS gateway server where the authentication for the initial login to the TS gateway server is handled by a RADIUS server (as determined by NPS), then the user uses standard Windows Auth to log in to their destination machine. I have the server successfully passing the auth to the RADIUS server, but only after it does a Windows auth first. The credentials will not match between the Windows Server and the RADIUS server, so the RADIUS auth always fails, and the TS Gateway server will not forward the request to the RADIUS server unless the Windows Auth succeeds. Does anyone know how to disable the Windows Auth requirement on a TS Gateway server? This is a pretty vanilla SBS 2008 box.

  Read the article

• ESXI 4 IPMI 2.0 - Cannot connect to IPMI after boot past bios

  - by adamflavell

  Dear All, I would appreciate any help here. I have a Supermicro 6016T-NTRF running ESXI 4 fine. The health monitors are showing up so ESXI is picking up the IPMI status. But I cannot connect to the host remotely via the dedicated IPMI nic. When the machine is in bios section I CAN connect but as soon as ESXI starts to boot I get blocked. Supermicro say the issue must be that ESXI is blocking the IPMI ports. How can this be corrected? I have read that there is no firewall on ESXI 4. Thanks, Adam

  Read the article

• Usability Problems with RDP and Dual Monitors

  - by Stung

  Hi All, When I RDP into a win2k3 machine with the dual mon settings, I've noticed that there are a couple of usability problems: 1) Dialog boxes are popped up right in the middle of both monitors making it hard to read. 2) Windows are maximized to both monitors instead of just one. 3) The task bar spans across two monitors. (This is just a matter of preference. I prefer my task bar to span across just my primary monitor) I know that Splitview is a good tool that solves all these problems, but there's a price-tag to it. To be fair, $39 for a tool like this is not too bad at all. However, before I suggest this tool to my team and manager to get the licenses for it, are there any free alternatives that will solve the 3 above problems? -Steve

  Read the article

< Previous Page | 405 406 407 408 409 410 411 412 413 414 415 416  | Next Page >