Search Results

Search found 12887 results on 516 pages for 'hard boiled wonderland'.

Page 410/516 | < Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >

• Windows 7 Won't Boot

  - by Vie

  I recently built a new computer, my fifth one. ASUS Maximus III Formula LGA 1156 Intel P55 ATX Motherboard EVGA 01G-P3-1452-TR GeForce GTS 450 Superclocked 1GB 128-bit GDDR5 PCI Express 2.0 x16 HDCP Video Card COOLMAX RM-1000B 1000W ATX psu Intel Core i7-875K lynnfield 2.93GHz LGA 1156 95w Quad-Core unlocked processor G.SKILL Ripjaws Series 16 (4x4GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) memory WD VelociRaptor WD3000GLFS 300gb 10000 RPM SATA 3.0Gb/s Hard Drive Sony Optiarc CD/DVD Burner model AD-7261S-0B LightScribe Windows 7 Home Premium 64-bit It gets hung up on the starting windows screen. When I went to install the OS it did the same thing wouldn't go past the windows logo, so I put the new HDD into my old computer and installed windows 7 thinking it was just an installer error. Put the fully installed HDD back into my new machine and it still gets stuck on the starting windows screen. I've tried most everything I've looked up. Disabled USB, Disabled Turbo Boost, Disabled everything that wasn't essential(just about every configuration I can think of), took it apart and put it back together, took all the ram out save one 4g stick(wouldn't even boot when I did this), did a memory scan which came back successful, I don't know what could be wrong. Only thing I can think of is a compatibility issue somewhere, but I've ran over it again and again and I don't know where there would be an issue like that. Need Backup! .<

  Read the article

• Why is it bad to map network drives in Windows?

  - by Beeblebrox

  There has been some spirited discussion within our IT department about mapping network drives. In particular, it has been said that mapping network drives is A Bad Thing and that adding DFS paths or network shares to your (Windows Explorer/Libraries) Favourites is a far better solution. Why is this the case? Personally I find the convenience of z:\folder to be better than \\server\path\folder', particularly with cmd line and scripting (of course I'm not talking about hard-coded links, naturally!). I have tried searching for pros and cons of mapped network drives, but I haven't seen anything other than 'should the network go down, the drive will be unavailable'. But this is a limitation of any network-accessed storage... I have also been told that mapped network drives poll the network when the network resource is unavailable, however I haven't found more information on this. Wouldn't this still be an issue with other network access mechanisms (that is, mapped Favourites) whenever Windows tries to enumerate the file system (for example, when a file/folder picker dialog is opened)? -- Do network drives poll the network any more than a Windows Explorer library/favourite?

  Read the article

• Apache multiple vhost logs, stored locally and sent to remote logstash

  - by benbradley

  I'm investigating centralised logging and it seems there's so many different ways this can be done. I don't want to run logstash as a log "sender", preferring to keep the web servers as lean and simple possible. So that means either using syslog, syslog-ng or the one I'm testing now, rsyslog. But I would like to have separate vhost log files on the web server, in addition to these logs being sent to a remote log collector. I've tested rsyslog using the imfile module to watch the Apache log files, but this means I have to hard-code each vhost log file into my rsyslog.conf. Not ideal as people will invariably forget when they add/remove sites on the server. The reason I'm using rsyslog's imfile is that Apache doesn't appear to let you log to file and syslog. And I want to keep vhost-specific log files on the web server. So how can I do this? Is there a way of having rsyslog produce local log files and forward the logs to a remote collector? I am prepared to change my Apache config to log to a single access/error log for all vhosts, so long as there are vhost-specific log files produced somewhere on the web server machine. I just don't want to lose any logging info if the remote log collector can't be contacted for any reason. Any comments/suggestions? Cheers, B

  Read the article

• 10GE network: Is it still deadly expensive? Any options?

  - by BarsMonster

  Hi! I am building home cluster where I going to have about 16 nodes which can live with 1G ports, but I really want to have 10GE on file server & central node. It's all local, so no need for cabels longer than 3-5m. And ofcourse I want to spend as little money as possible (not going to spend more than whole cluster costs) :-) What are my options? 1) Legacy solution is to take some 24-48 port 1GE switch, and connect to file/central nodes via 4-8 aggregated links. This will work I guess, cost is very acceptable, but I am not sure if it's ok to use that much aggregated links. And ofcourse it would be hard to double bandwidth when needed... :-D 2) Switch with several 10GE uplink 'ports'. As far as I see, they all require modules which costs about 1000$, so I will need 4 10G modules, and 2 10GE cards... Smells like way more than 5000$+... 3) Connect file & central node via 2 10G cards directly, and put 4 quadport 1GE NICs on fileserver. I am saving on 2 10G modules and a switch, fileserver will have to do packet routing, but it's still gonna have alot of CPU's left :-) 4) Any other options? Infiniband? 5) Are MyriNet adaptors works fine? I guess there are no cheaper options? 6) Hmm... Scrap fileserver, put it all on central node and provide dedicated 1GE port for each of the nodes... This is sad...

  Read the article

• What was your biggest waste of money, and what should you have bought instead? [closed]

  - by rob

  I waste a lot of money on computer equipment and other electronics that I don't really need. I've also bought software that I've never really used, or which as been replaced by better free software. As I'm buying things, it doesn't seem like much--fifty bucks here, a hundred dollars there. But when I go back and look at how much I've spent over my past few electronics purchases, I usually start to think of the other things I could have bought with that money instead. Most of the computer hardware and electronics don't usually improve my life by much, if at all. Case in point: back when I was in college, I prided myself on getting the best deals for computer hardware, but when I went back and added up all the money I had spent, I had probably wasted close to a thousand dollars on "cheap" $100 hard drives that eventually all went bad (including the warranty replacements). Even if they did still work, it would not be worth the effort to use them, because they're too small and too noisy by today's standards. I've also spent thousands more on other junk, such as RAM and CPU upgrades that only gave modest performance jumps, and wireless audio transmitters that I used for a short time to stream music from the now-defunct Yahoo! Music service. Every time I see a really great deal on RAM or video cards, I come one click away from buying them, but these days I'm usually able to resist. I've been wanting to get into woodworking ever since I moved into my house, and five years later I'm finally saving up for a $600 table saw. Sure, I've already got a toolbox and a couple of the essential power tools like a drill and a jigsaw, but I can't help but think that I'd have an entire shop full of woodworking tools and a lot of nice wood furniture if I hadn't wasted all that money back in college. What has been your biggest waste of money on computer stuff and technology? If you had all that money back, would you make the same mistake again and buy the same types of things, or would you spend it on something else?

  Read the article

• Is there a good alternative to Videora iPod Converter?

  - by Richard

  I use Videora to convert my videos (in DivX/XviD format) to something I can play on my iPod Classic. I really dislike it. It's clunky, riddled with adverts, sometimes doesn't convert properly (the infamous "invalid public atom" error - see Google for more) and has a UI that truly stinks. On the upside, it's free, accepts a list of video files (via the oddly hard to find "1-click convert" button) and just gets on with the converting as it already knows the correct settings for my iPod. One final nice touch is that once they are converted, it'll automatically upload them into iTunes. Are there any alternatives which have all the upsides but none of the downsides? Bonus points if they can set the metadata in iTunes correctly for TV shows (season, show, episode) and delete the converted file afterwards (as my iTunes settings means that a copy is made elsewhere). I've looked at a bunch of applications (handbrake, virtualdub, mediacoder, format factory, any video converter, convertxtodvd) but many of them fail the "just select a list of files and get on with converting" test - let alone all the other features I want. I have no desire to individually set the video size of each file or the codec or the post-processing options. I'm currently using the command line version of HandBrake (handbrakecli) and a hand-written DOS batch file to go through every file in a folder and convert it. It does most of what I want, just not in a very slick way. Can anyone recommend anything better? It needs to work on Windows 7 and be free.

  Read the article

• Mod_rewrite to eliminate query strings

  - by Greg Frommer

  Hi everyone, I have been working on this for a while but I'm not finding exactly what I am looking for. I am writing a webapp to let my users create and publish pieces of HTML content in a domain and URL folder structure of their choosing. All of the content and requested URL structures are stored in a database. I have all of the code in my index.php (in the root folder) to access the database content, and based on the server name (and hopefully folder structure) will pick out the proper content from the DB and display it to the end-users browser. So my situation looks like this: www.test.com/index.php?id=123234345 ... will display the proper page, but I want my users to be able to define a unique "page name" instead of using the numeric index (also I want to hide the /index.php part) so what I would like the end-user to see is: www.test.com/arbitrary-unique-keyword/keyword2/keyword3 which will invoke the index.php page in the root folder. Then I will use the PHP $_SERVER['PATH_INFO'] variable to match the requested folder structure up with the proper content in my database and display that. All the material I have found so far expects me to hard code parts of the folder structure into the rules.... but I think I want something simpler (perhaps). So the question in a nutshell: How do I use mod_rewrite to allow all "non-existent" folder paths be passed through to a main index.php residing in the root folder? (For all paths that DO exist, like for calls to images... I want those to succeed and not be directed to the index.php obviously) Thanks everyone, please let me know if I can clear anything up.

  Read the article

• Creating Custom ISO Images

  - by ericl42

  I am working on creating some custom ISO images using primarily Fedora and CentOS. I want the image to be a bootable live CD with some specific files on it. I also want it to have the option to be able to be downloaded to the hard drive. I've read some various articles but want to get a few more opinions since I've never done this before. Currently I'm trying 2 different methods. Install Fedora with the configuration exactly how I want it and then run the livecd-tools program to pull everything I currently have to an ISO. I haven't got this to work yet but I do see a few issues with it. Such as the default passwords I had to put in. Run a Fedora live CD and install a few things I want on it and then copy the image of it. I believe this would work better since it has more of a live cd feel. However I"m not 100% sure how I should go about pulling the current image to my own ISO. I know some people have said to use mkisofs and a few other programs but any advice would be greatly appreciated.

  Read the article

• ADSL Modem/Router sometimes hands out incorrect IP addresses

  - by Peter Keevill

  My setup is as follows:- Main ADSL modem / router (switch) configured as DHCP server with address range 192.168.0.25-60 The office machines are configured with fixed IP ( not in the same address pool of course ) and hard wired to this router. A wireless access point ( Router ) is connected to provide Internet access for guests in a separate area. This router is NOT configured as a DHCP server. Wireless authentication is turned off. IP address lease times are set to 4 hours. Sometimes guests are able to connect to the wireless access point but they are not given a valid IP. They get 169.x.x.x addresses. Rebooting their machines does not resolve the problem. The only way to resolve is to reboot the main ADSL/router which is often frustrating for other users who are successfully connected with valid IP and DG. The problem seems to occur more frequently to Apple/Mac guests although it also sometimes occurs with Win machines. I personally use Ubuntu on my Laptop and thus far, never have had any problem connecting and getting a valid IP address in the guest area. One further point of note which may give a clue is that certain guests ( always Apple/Mac ) get lease times of 90 days. However, this does not 'stack out' the number of available addresses and of course, rebooting the router clears them until the next time they login.

  Read the article

• RTorrent stops my torrents, crashes, and I have to manually re-add torrents and start them. How can I stop this cycle of doom?

  - by meder

  I cannot use transmission which is the best torrent client because it's banned from one of the trackers I use, so I am forced to use rtorrent. Normally I am all for command-line programs, however rtorrent ( 0.8.6/0.12.6 ) is simply frustrating. It is not intuitive, imo. I have 400 MB left on the HD and that's more than enough to dl this 200 MB avi. Rtorrent stops the download, though. It says [CLOSED] near the torrent. I do ctrl-r and that invokes the local hash check, and after that's done rtorrent simply dies ( wtf? ). Afterwards, it gives me rtorrent: TrackerManager::send_later() m_control->set() == DownloadInfo::STOPPED. So that leads me to open rtorrent again, then hit ENTER and /home/meder/file.avi.torrent, down arrow, and ctrl-S. I am looking for multiple things... How can I tell rtorrent to not worry about disk space? Again, it stops the torrent if my HD only has 400 mb when the torrent I'm dling is 200 mb ( there are no other torrents ). Why does ctrl-R fail hard? Why does it cause rtorrent to crash? If #2 is not solvable, can someone provide an easy way to add a torrent and start it, a more efficient method than typing the torrent name, hitting the down arrow, and ctrl-S?

  Read the article

• Win2008: Boot from mirrored dynamic disk fails!

  - by Daniel Marschall

  Hello. I am using Windows Server 2008 R2 Datacenter and I got two 1.5TB S-ATA2 hard disks installed and I want to make a soft raid. (I do know the disadvantages of softraid vs. hardraid) I have following partitions on Disk 0: (1) Microsoft Reserved 100 MB (dynamic), created during setup (2) System Partition 100 GB (dynamic) (3) Data partition, 1.2TB (dynamic) I already mirrored these contents to Disk 1. Its contents are: (1) System partition mirror, 100 GB (dynamic) (2) Data partition, 1.2 TB mirror (dynamic) (3) Unusued 100 MB (dynamic) -- is from "MSR" of Disk 0, created during setup. Since data and system partition are mirrored, I expect that my system works if disk 0 would fail. But it doesn't. If I force booting on disk 0: Works (I get the 2 bootloader screen) If I force booting on disk 1 (F8 for BBS), nothing happens. I got a blank black screen with the blinking caret. I already made disk1/partition1 active with diskpart, but it still does not boot from this drive. Please help. Both partitions are in "MBR" partition style. They look equal, except the missing "MSR" partition at the partition beginning (which seems to be not relevant to booting). Regards Daniel Marschall

  Read the article

• System State Backup Retention Policies

  - by isoscelestriangle

  I was wondering if there was a general consensus on how long to keep system state backups. I am trying to reevaluate our current backup process, and trying to get a good handle on our current storage requirements. Our current setup involves tapes and sending backups offsite with Barracuda Networks. We have been doing our system state backups with Barracuda now, which does full backups daily, leaving our storage requirements growing quite quickly. My boss is a little too gung-ho with backups and wants our system states saved for quite a while. We currently have 5 days of nightlies, 5 weeklies, 3 monthlies, and so on. I think this is quite overkill for system state backups. My boss wants the ability to go back in time to find when an issue appeared, but I don't think that is practical. Many things change in the course of several months. I also think it would be hard not to notice problems with our DCs and other servers for several months. I would think that a previous week's snapshot and the current week's dailies would suffice. Any advice or reading you can point me to? Thanks!

  Read the article

• Can't upgrade NVIDIA GeForce 310M display driver on Acer Aspire 5745PG

  - by Emerson

  I've been for days already trying to update my video driver. I have an Acer Aspire 5745PG with a "NVIDIA GeForce 310M" board, and I was trying to run Sony Vegas video editor with Boris Continunn plugins. It happened that some of the plugins, like BCC Text Extrude wouldn't work, showing the message "Insufficient depth resolution to run Blue". I then read somewhere that updating the display driver would do the trick. That was when my nightmares started, I lost already good 3 nights trying to sort this out, without success :( The display driver that was before (and that I current have after restoring) was the version 8.16.11.8997. First thing I tried was downloading the 8.17.12.6619 driver directly from Acer, which was shown as the latest version from Acer website: http://support.acer.com/product/default.aspx?modelId=2466 Running it would say "Diver Package Failure - Setup failed to read the required Display Driver to be used with this package" I then tried directly the NVIDIA own driver, which the latest was version 296.10: http://us.download.nvidia.com/Windows/296.10/296.10-notebook-win7-winvista-64bit-international-whql.exe That gave me similar error message :/ So after some researching I found out that some people had the same issue and they had to change the configuration file to allow the installer to recognize this NVIDIA board: http://forums.nvidia.com/index.php?showtopic=222904 That topic said to look for the "Device Instance Id" property of the "NVIDIA GeForce 310M" display , which I couldn't find, instead I found the "Hardware Id", which seemed to be the right one. I followed the instructions and changed the inf file first for the Acer installation, and after for the NVIDIA own driver. It actually managed to go ahead with the installation in both instances, but the only thing I got was a black screen, while the computer still apeared to be running fine. I had to hard reset, and then it would come back with generic vga driver. I could only get my display back using the recovery function. I imagine thousands of this notebook was sold, and it can't have its driver updated?? Could someone help me with this?? Thanks Echo

  Read the article

• Virtual Windows 2008 Server Activation with ESX

  - by Logman

  I had a decommissioned server (Dell PE2950) that we could still use, it had OEM Windows 2003 Std on it but wanted to use it as a new host with VMware ESX5 to put a couple legacy severs on it. I wiped it clean and maxed out the memory. But when I added the memory I noticed the product key sticker was a "WindowsServer08 Std 1-4cpu" product key, and it also had a Virtual Key. Not sure why it had Win2003 and not Win2008 from the start, but I would like to use that license if I can. The virtual host would stay on the same physical server, so there shouldn't be a problem with licensing... but I do not want to use Hyper-V unless I can not help it. I have installed ESX5 on the server, but I cannot get the Windows 2008 server to activate. The product key is hard to read, and I have checked the key quite a few times. But my question is... Is it because Hyper-V was not installed on the host? But I thought you could use the product key alone on a virtual host? Maybe because I am not using a Dell Windows 2008 disk but iso from MS directly via the Volumne Licensing site? EDIT: well, Im pretty sure I got the product key correct. If its not the product key, could the activation problem be because Im not using hyper-v or maybe the correct install dvd? EDIT2: maybe because I added 28GB of memory? Originally 4GB...

  Read the article

• Bad Intel DQ965GF motherboard? Fails memtest, but memory is good.

  - by Boden

  I've got a machine with a DQ965GF motherboard. Two days ago it started locking up hard. Ran memtest 3.3, 1.7, and TestMem 4. TestMem just freezes, memtest failed on moving 8 bit inversions. Letting memtest run eventually causes the system to restart. I pulled memory sticks one by one, and then replaced the memory with a couple of known good sticks. No luck. I switched power supplies, didn't help. Swapped video cards just to be safe. No help. When I start the machine I get a single beep before it POSTs. According to the manual, a single beep means: 1 beep - Refresh Error (with nothing on the screen and it is not a video problem) I'm assuming that the motherboard has failed since it's obviously not a RAM or power issue. Do you agree? NOTE: I also tried resetting BIOS defaults, and even flashed the BIOS to the latest version. I also ran the Mersenne Prime Test and the CPU seems to click along just fine. (Tried logging in to superuser with openid but it's not working for me today. Hope this gets through)

  Read the article

• Apache in OS X not displaying localhost nor vhosts correctly

  - by Marcus

  I've encountered a really odd problem in my development environment, and I really can't make any sense of it. It started by a locally developed PHP-site refused to update any content I edited in a file – no text or nothing. So if the document was: <h2>Hello!</h2> and I edited it to <h2>What's wrong?!</h2> it still outputed <h2>Hello!</h2>. I thought is was some kind of cache:ing problem, but no "hard reloads" in the browser nor sudo apachectl -k restart sorted it out. Only a restart of my Mac did finally fix it. Now, a few days later even stranger issues are appearing. I have a LAMP-stack installed via Homebrew, in httpd-vhosts.conf I've set ~/Dev/ as my localhost, and I set up a <VirtualHost *80> for each project ("ServerName projectname.dev" for example). However, what ever files of folder I put in ~/Dev/ have stopped showing up on localhost, and new VirtualHost-directives doesn't work. Three projects + "docs" in the folder: But "localhost" only displays the two older projects...? So, as I've said – I've tried restarting Apache (without errors), clearing browser caches (tried in three browsers, Chrome, Safari and Firefox) and ever rebooting the Mac. Nothing. Any ideas? Running OS X 10.8.5 and Apache 2.2.24.

  Read the article

• How can visiting a webpage infect your computer?

  - by Cybis

  My mother's computer recently became infected with some sort of rootkit. It began when she received an email from a close friend asking her to check out some sort of webpage. I never saw it, but my mother said it was just a blog of some sort, nothing interesting. A few days later, my mother signed in on the PayPal homepage. PayPal gave some sort of security notice which stated that to prevent fraud, they needed some additional personal information. Among some of the more normal information (name, address, etc.), they asked for her SSN and bank PIN! She refused to submit that information and complained to PayPal that they shouldn't ask for it. PayPal said they would never ask for such information and that it wasn't their webpage. There was no such "security notice" when she logged in from a different computer, only from hers. It wasn't a phishing attempt or redirection of some sort, IE clearly showed an SSL connection to https://www.paypal.com/ She remembered that strange email and asked her friend about it - the friend never sent it! Obviously, something on her computer was intercepting the PayPal homepage and that email was the only other strange thing to happen recently. She entrusted me to fix everything. I nuked the computer from orbit since it was the only way to be sure (i.e., reformatted her hard drive and did a clean install). That seemed to work fine. But that got me wondering... my mother didn't download and run anything. There were no weird ActiveX controls running (she's not computer illiterate and knows not to install them), and she only uses webmail (i.e., no Outlook vulnerability). When I think webpages, I think content presentation - JavaScript, HTML, and maybe some Flash. How could that possibly install and execute arbitrary software on your computer? It seems kinda weird/stupid that such vulnerabilities exist.

  Read the article

• IIS replication - Is it possible

  - by Ian

  Hi All, I have a requirement for a client that I have a centralised system that all his satellite branches can work on. Currently this is a ASP.net web forms app running under IIS 7 on win 2008 RC 2 using an SQL backend. The client has now requested that each branch have a local server, so that in the event that the internet connection is down, the branches productivity does not suffer. His other request is that everything can be updated via the central hub and using some mechanism the updates filter down to the individual sites. What are my options here? I see the following as possible options: Multiple redundant internet connections controlled by load balancers SQL replication for the DB (What is better, snapshot, merge or transactional) Roll my own IIS sync service the periodically checks if there is a new version of the web app and downloads it (I hope there are better option than this) Something way better I don’t yet know about (I hope this is the one I need) One of my clients concerns are that the branches are often in very remote areas where everything from technicians to internet is hard to find and very scarce. Any ideas, suggestions, tips etc are welcome. Thanks all

  Read the article

• Can any iSCSI NAS appliance replicate / clone a LUN to an external drive?

  - by Boden

  I would like to backup using Windows Imaging to some kind of NAS appliance. I believe this will require the NAS to support iSCSI. I would then like the appliance to support the replication of the iSCSI LUN to an external eSATA or USB disk connected directly to the appliance. I've found plenty of NAS appliances that can do iSCSI and replicate to an external drive, but none that I've found thus far can do both at once. That is, the devices can do iSCSI, but then the replication feature doesn't work. The idea here is to backup to an appliance located in a secure office far away from the server room. Offsite backups to external hard drive could be managed from the appliance. The benefits of such a setup would be: 1) very unlikely that fire or random theft would affect both server-room backup and "remote" backup appliance 2) offsite backups could be managed by multiple trusted people without granting access to server room 3) Windows imaging provides poor man's deduplication, so each backup volume can contain a decent backup history. I understand why this would be a non-trivial thing to implement, but I'm wondering if such a thing exists? Preferably a tabletop, low to medium cost device. Alternative solutions welcome. NOTE: I'm backing up very few but very large files, so file replication is not a good option.

  Read the article

• I cannot access Windows Update at all

  - by Cardinal fang

  I have been unable to access the Windows update site for a couple of weeks now. I just get a message saying "Internet Explorer cannot display the webpage" and saying I have connection problems. Same thing is replicated with any other Microsoft site I try to access. The Automatic Updates also do not work. I can access every other wesbite I've surfed to. I've tried Googling the problem and based on what other site have suggested I have cleared my cache and temp files. I've scanning my hard drive with my antivirus in case I have a virus (nada). I've tried turning off my firewall and anti-virus (I run Zone Alarm). I've downloaded SpyBot and scanned my drive with that in case something was missed by Zone Alarm (again nada). Based on suggestions from the smart cookies on the Bad Science forum, I've used nslookup to check my translation isn't wonky (got all the info they said I should get). I've also tried navigating there directly using the IP address I was given (nope). I normally access the internet through a 3 mobile broadband connection, but have also tried connecting using a mate's wi-fi connection in case it was something on my mobile modem interferring. I run Windows XP SP3 with Internet Explorer 7 and Zone Alarm Internet Security Suite as my anti-virus/ firewall. Any suggestions?

  Read the article

• Handling the Outlook 2007 AutoArchive PST file

  - by Doug Luxem

  We encourage our users to enable AutoArchive in Outlook 2007 as a way to manage their mailbox sizes. However, we frequently end up running in to problems with the archive.pst file that is generated. The two main problems we have are: The archive.pst file is located in the user's local profile directory and is never backed up. A dead hard drive or stolen laptop could result in months or years of missing email. All other personal data is stored on network shares, but we can't do that for Outlook PST files. Without some sort of manual intervention, the archive will grow to enormous sizes. Although Outlook 2007 SP2 handles the large files better than before, it still results in slow response times from Outlook and an increase likelihood of a corrupt PST file. To mitigate these problems personally, I move the archives to a c:\Outlook folder and manually back that up to a shared drive every month or so. Additionally, I rotate archive files every year so that I have one file for each year (archive2008.pst, etc). Obviously, asking our users to do this same wouldn't help much. We need some sort of automated solution to take care of points 1 and 2. I have to imagine this is a common problem for Exchange organizations, so what is the best method to handle this?

  Read the article

• HP Pavillion DV6500 recovery disk failure

  - by Scott W

  I recently attempted to re-install Windows Vista on an HP Pavillion DV6500 using the factory recovery DVD's, but encountered a strange problem. When the recovery disk attempted to reformat the hard disk, it failed at 22%. The error message provided was not very informative, just the error code "0x400110020000 1005". A google search turned up some people with a similar problem who asserted that HP has been know to ship corrupted recovery DVDs. The recovery disk did manage to reformat the the recovery partition before failing though, so recovering from the partition is no longer an option. It would be possible to reinstall from an off-the-shelf retail copy of Vista and then pull the drivers from HP's website, but I don't have access to a copy of Vista, and it would really be outrageous to have to purchase a new OS when I have a perfectly valid license already. Thought about biting the bullet and upgrading to Windows 7, but my understanding is that without Vista installed I'd be unable to use the upgrade version, and be forced to purchase the more expensive non-upgrade retail copy (!). Can anyone suggest a possible solution to this Catch-22? I've run out of ideas.

  Read the article

• Hardware freeze during disk activity

  - by Thomi

  I built myself a linux-based NAS. It has several drives of various sizes and ages in an LVM configuration, with 800GB or so of data. The data is served using a simple samba server. This was working flawlessly, but after physically moving it, it has developed a strange fault: Whenever I do something on the server to cause disk activity, the entire machine freezes hard. This has the effect of killing any open network connections to the box, and generally making it useless. If I leave the machine for a few minutes it seems to come right again, but obviously this isn't really a solution. There are no error or warning messages in syslog, or the kernel logs. If I power the machine on, and leave it, it runs for several days without locking up. After that time I stopped testing. It doesn't freeze instantly - obviously it doesn't freeze while booting, and I can normally log in via SSH and start poking around in a few log files for a couple of minutes before it dies. My question is: What diagnostic tests can I run to determine the casuse?

  Read the article

• Dell Driver Support for Latitude E6320 Windows 7 Enterprise

  - by IamPolaris

  I recently did a reinstall of Windows 7 Enterprise on a Dell Latitude E6320, which is a 64 bit system. After the install process, and doing typical Windows Update stuff, I looked at my Device Manager and found that I had devices which were missing drivers. My missing drivers: After going to the Dell Support site and looking at the files, and doing some sleuthing I found the following support document: http://downloads.dell.com/utility/Latitude%20E-Family%20%20Mobile%20Precision%20Re-Image%20How-To%20Guide%20-%20A03%20Rev%203%200.pdf This document hints in appendix C that the Broadcom USH is the Control Point Security and the Unknown device is Micro freefall sensor. The network controller is my wireless, as I cannot connect wirelessly, and the final missing driver I am not sure. Attempting to install the control point security exe on the support page will not work. After downloading, I am given the message that I am attempting to install a 32 bit driver on a 64 bit machine EVEN THOUGH I selected the win7 64 bit option from the support page. Beyond that, some of the drivers (Which are confusing to read and hard to understand what they do) and the system utilities which are supposedly supposed to make this process simpler will either a) not run because they are 32 bit exe's or b) the support page cannot find the file attempted to download. Is there anything I can do to get (at the very least) my wireless running, but idealistically all of my drivers. A solution which assumes Dell is completely incompetent would be ideal. :P Some forums have said that I should download the chipset driver, others say to get the system utility file (DSS_UTIL_WIN_R282536.EXE). I have had no luck as of yet...

  Read the article

• Laptop Most Likely to Have Good Driver Support

  - by ShabbyDoo

  Through numerous bad experiences, I have learned that the most likely cause of laptop "failure" is the lack of updated drivers for new operating systems. As an example, I have a perfectly good Thinkpad T42 at home which runs Windows 7 just fine for my purposes except that no compatible ATI video drivers are available, and the generic drivers have flicker effects. I recently saw an ASUS laptop which looked quite nice except that I would be beholden to them to release ATI video driver updates customized for it. And, I can't trust them to do that for more than six months. What laptops (manufacturer/line) should I consider so that I could expect at least a couple years of frequent updates? I plan on running Windows 7 and installing whatever successor comes out. I like Intel components (especially WiFi) because I can install their drivers directly from them, and they have a long history of providing updates for years after shipping a particular component. More generally, components from companies which are likely to update drivers frequently are good as long as I can install the component manufacturer-provided drivers without laptop-specific customization (like the ATI drivers). Also, if a component can be replaced easily, I am less concerned. For example, Dell stopped pumping out updated drivers for one of its mini-PCI WiFi cards. The solution was to buy an Intel replacement on eBay for $12! That's fine. I can deal with that. So, what laptops should I consider so that I'm not likely to be stuck between a rock and a hard place?

  Read the article

< Previous Page | 406 407 408 409 410 411 412 413 414 415 416 417  | Next Page >