Search Results

Search found 16587 results on 664 pages for 'virtual hardware'.

Page 412/664 | < Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >

• Cisco FC SAN switch decision

  - by Chopper3

  I've got to buy a bunch of FC SAN switches in the next week or so, I have to, and want to, buy Cisco MDSs. Servers are HP BL490c G6's in C7000 chassis with Virtual-Connect Flex-10 ethernet interconnects and VC FC interconnects (Emulex HBAs btw), all running ESX 3.5U4 (for now). I think I've only really got two choices; MDS 9509's with dual-supervisors with a single 48-port 4Gb FC card MDS 9222i's with single supervisor and the built-in 18-FC-port/4-GigE-FCIP-port option Both have the same functionality (I think, buying the enterprise licence btw), both have plenty enough performance and adequate ports for now and the next three years. The 9222i's are about 55% the price of the 9509's - logic says get the 'i's but will I really miss the dual-supervisors? I've got lots of 9509's with dual-supervisors that I'm very happy with but I'm not sure I've every benefitted from the dual-sups in the past and they are nearly twice the price - but if I don't buy them and miss them I can't retrofit them later. What are your thoughts?

  Read the article

• does heartbeat v3 support same resource agent types of pacemaker?

  - by Emre He

  As we know, Pacemaker supports three types of Resource Agents, ? LSB Resource Agents, ? OCF Resource Agents, ? legacy Heartbeat Resource Agents http://www.linux-ha.org/wiki/Resource_Agents does heartbeat v3 support above 3 types resource agent? or it only support LSB and legacy heartbeat resource agents? because we have only virtual ip and one service need to switch in ha cluster, so we decide not involve pacemaker, so we come to this question, for example we cannot monitor the application service by heartbeat, heartbeat only can handle to start it on active node. thanks, Emre

  Read the article

• After low level formatting can microsoft track previously pirated windows installed on pc

  - by Neelabh

  I am getting call from Microsoft and they are forcing me to purchase so many licensed software but my budget is not that much.. So they are asking for On-Site Audit (SAM Review)... So I did low level formatting of my All PC's and Installed Ubuntu. So can they track I installed pirated windows xp earlier on these system or I need to change hardware.. After formatting on what parameter Microsoft Track earlier piracy: 1) By any Harddisk ID 2) By any Motherboard ID 3) By any IP Address Please help me otherwise I have to borrow so much money for licensing fee. Thanks in Advance..

  Read the article

• How to fully use the 4G in my Laptop under Ubuntu 9.10 - 32-bit

  - by jfmessier

  I have a Toshiba A100, which I upgraded to 4G of RAM. The hardware startup indeed shows 4G of RAM, and I recently installed Windows 7, just to see how it behaves on it. So far so good, it displays 4G of RAM. Not that I tried to use it all, but it displays it. Previously under XP, I also would see 4G of RAM. But under Ubuntu 9.10 (32 or 64 bits), it only displays 2.9 G of RAM. And my kernel is the "pae" compiled one, which is supposed to do the trick to work around the 32-bit CPU limitation. How can I get Ubuntu to fully use my 4G of RAM ?

  Read the article

• Windows 2008R2 two node failover cluster creation fails

  - by Francois Wolmarans

  We have just installed two Windows 2008R2 Enterprise machines with identical hardware. When running the cluster validation everything is ok. When creating the cluster it fails with the following error: An error occurred while creating the cluster. An error occurred creating cluster 'CLUSTER04'. The parameter is incorrect The logfile on the first node where we are running our config from, does not show any errors. On the second node we get: The Cluster service is shutting down because quorum was lost. This could be due to the loss of network connectivity between some or all nodes in the cluster, or a failover of the witness disk. I've double checked and all communication between the servers are fine. Even when creating a one node cluster it gives the error. There are other failover clusters we have setup without any issues.

  Read the article

• Format an external hard disk

  - by Alex

  I am trying to format an external hard disk to FAT32 (I need it to work with some hardware that expects it to be in FAT32). When I am trying to format it via windows the only option I'm getting is to format it to NTFS. Another strange thing is that when I am trying to format one of my own partitions (on the hard disk that is running the OS) I can do it only in NTFS while another partition my OS can format in both NTFS and FAT32. What can cause such a behavior and how can I format the external hard disk to FAT32?

  Read the article

• Is it possible to download minimal drivers on Windows, without the extra software packages?

  - by Anton Gogolev

  The situation in all its glory: 30 megs for ATIs' "Display Driver Only". Almost 100 megs for NVidias' GeForce/Ion bloatware. 300 megs for an HP printer driver with immense amount of crap 30 megs for a Realtek integrated sound card driver. 50 megs for a mouse driver ...and dozens and dozens of other similar examples Additinally, UI/UX on vendors' sites is really terrible: I have to carefully pick and choose the exact model of my whatever, although this packages do contain drivers for pretty much every possible hardware model out there. My question is: How and where can I download true minimal drivers without all these ATI "Installation Managers", Realtek GUIs, ASUS tools, etc.?

  Read the article

• Why can't I play YouTube clips properly anymore?

  - by NoCanDo

  I haven't got the faintest idea what happened, but since about 3-4 days now I can't play any clips on YouTube properly at all. Proper as in continuously without loading, pause, playback, pause, loading, playback, pause, loading, playback, etc. I haven't changed anything hardware nor software-wise. On the other hand I can play Break.com, Viddler, Liveleak, Metacafe without any trouble. I tried my own tips, but that hasn't helped me at all. What on earth happend? Is it me, or is it YouTube? I'm using Firefox 3.6 Beta 5. But the issue is the same on Chrome as well as on Internet Explorer.

  Read the article

• Install both 64-bit and 32-bit JDK on a 64-bit windows?

  - by Toperi

  I need to use a java library that uses native code requiring a 32-bit jvm. I have 64-bit windows with 64-bit eclipse installed with 64-bit JDK7. In order to develop with it, do I need to have 32-bit JDK? Or would the JRE suffice? If it is possible to install both, what is the naming convention you use for the installation directory for the 32-bit jre or jdk? I have heard rumors there is a performance hit on virtual memory if both are installed, is this true?

  Read the article

• "broken" windows xp after disc replacement

  - by epeleg

  Windows xp pro OEM was installed on my machine, Disk was failing so I cloned it to a new disk (larger one). Now windows said that the hardware has changed significantly and I need to re-activate, and I would gladly do (got the product number on a sticker on the machine) - only that for running the activation process I need to be logged-in, but when I try to login it just automatically logs me out again :( I know my credentials are O.K. because I can connect to the machine remotely and also use sysinternals tools such as PsExec or PSList etc. on it from a remote machine by specifying user and pasword. Login via safemode does not work any differently then in normal mode... I tried to run rundll32.exe syssetup,SetupOobeBnk (as suggested in several places on the net) using PsExec but it did not seem to help... Is there any way out of this evil circle? [ can't log in because not activated - cant activate because not logged in ]

  Read the article

• Fedora Installation with software repository in DVD does not work

  - by Raks

  I bought a new assembled PC with processor as Core-i3(2120) and Intel H61 motherboard and was trying to install Fedora 16 from a DVD. This DVD contains all the packages so that installation does not require to download packages from internet. I have used this DVD to install Fedora 16 offline many a times though in machines with different hardware configuration. But in this new machine when the installation reaches the stage wherein it asks for Software repository selection I select CD/DVD but the system fails to read the media and throws up an error that it cannot detect the media. THe LED in the DVD writer also indicate that the DVD is not being read. Now there is neither a problem with the DVD or the DVD drive because the installation started from the DVD itself. So what could the problem be, anything in the BIOS that is causing the problem, Is there any way I could utilize the packages already existing in the CD so that I save downloading the packages from DVD

  Read the article

• Unable to create context rendering error when run OpenGL application

  - by Rodnower

  Hello, I try to run Mesa gears example and I get following error: freeglut (./gears): Unable to create direct context rendering for window 'Gears' This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity. I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5 Relevant output of lspci -v gives: 00:0f.0 VGA compatible controller: VMware SVGA II Adapter (prog-if 00 [VGA controller]) Subsystem: VMware SVGA II Adapter Flags: bus master, medium devsel, latency 64, IRQ 9 I/O ports at 10d0 [size=16] Memory at d0000000 (32-bit, non-prefetchable) [size=128M] Memory at d8000000 (32-bit, non-prefetchable) [size=8M] [virtual] Expansion ROM at 30000000 [disabled] [size=32K] Capabilities: [40] Vendor Specific Information Any one have idea? There is driver of vmvare for CentOS? Thank you for ahead.

  Read the article

• Ultra Low Latency Linux Distribution or Kernel

  - by Zanler

  I'd like to know if there are any linux distributions that are focused on low latency networking. The area I'm working in is algorithmic trading, and extremely low latency comms between machines is a must. The current h/w we're using is 10g ethernet, we're looking into things like infiniband RDMA and Voltaire VMA I've googled around, and have only been able to find tidbtits of kernel patches, command line options and hardware suggestions. I'm looking for a complete solution, specially built kernel, kernel bypass features, essentially all the goodies rolled up into one package - does such a thing even exist? I ask as a lot of this stuff seems to be a black art, people keep secret what they know works etc.

  Read the article

• Ultra Low Latency Linux Distribution or Kernel

  - by Zanlor

  I'd like to know if there are any linux distributions that are focused on low latency networking. The area I'm working in is algorithmic trading, and extremely low latency comms between machines is a must. The current h/w we're using is 10g ethernet, we're looking into things like infiniband RDMA and Voltaire VMA I've googled around, and have only been able to find tidbtits of kernel patches, command line options and hardware suggestions. I'm looking for a complete solution, specially built kernel, kernel bypass features, essentially all the goodies rolled up into one package - does such a thing even exist? I ask as a lot of this stuff seems to be a black art, people keep secret what they know works etc.

  Read the article

• Keyboard doesn't load in windows xp after Alureon infection

  - by alureonissue

  AVAST detected alureon in a number of system files including atapi.sys and kbdclass.sys iple I quarantined those files, and restarted my machine. After restarting, my keyboard and cdrom did not work (I assumed those drivers would be automatically replaced, but was apparently wrong.) I went into device manager, and checked for hardware changes, it fixed the cdrom (which works now) and looked as though it fixed the keyboard as well. It did not. After multiple reboots the keyboard is still not recognized. It works up until the XP login screen loads, after which it is completely unresponsive. Any advice would be appreciated. Thanks :)

  Read the article

• Cannot access Application configured on local IIS 7 using IP/machine name

  - by SilverHorse

  I have a windows 7 machine 64 bit and IIS 7 I have a default website on the IIS.Its binding is {IP: All Unassigned , Port:80 , Host Name : blank} I have added a new asp.net application to that website,mapped physical path, have set the virtual path as "MyWebApp". Application pool for "MyWebApp" is "DefaultAppPool" {.Net Framework: 4.0 ; Managed Pipeline Mode: Classic} The problem I am facing is I can access the website using http://localhost, http://IP.IP.IP.IP and http://MyMachineName But I can not access the Application other than using http://localhost/MyWebApp What should I do if I want to access the webapp using http://MyMachineName/MyWebApp OR http://IP.IP.IP.IP/MyWebApp Please note : I have already created an inbound rule to allow all HTTP traffic for port 80 in firewall settings.

  Read the article

• Is Hyper-V Server 2008 working on Intel's Atom platform

  - by Josip Medved

  Did anybody try to install Hyper-V on Intel Atom platform? Hyper-V requires: x64 compatible processor with Intel VT or AMD-V technology enabled Hardware Data Execution Prevention (DEP) It seems that both requirements are satisfied with Atom as processor. However, I wonder whether there is some blocking issue (e.g. BIOS that does not support it) since all Atom motherboards I checked had quite old north/south-bridge. My intentions are to run two low-requirements virtual machines (embedded Linux), so performance should not be an issue.

  Read the article

• How to access my local host server from internet

  - by rahul.p.33

  How to access my local host server from internet have installed WAMP server on my Windows XP, And i had created a index.php file in my root folder, and i assigned a virtual name to my localhost. eg: earlier i accessed my index.php via: Code: http:// localhost/ index.php but now i can access like : Code: http: //www. mysite. com/index.php but the problem is that i can access this from my computer only.. how can i use it from internet.. please help me.... Thanks.

  Read the article

• How to access my local host server from internet

  - by rahul.p.33

  How to access my local host server from internet have installed WAMP server on my Windows XP, And i had created a index.php file in my root folder, and i assigned a virtual name to my localhost. eg: earlier i accessed my index.php via: Code: http:// localhost/ index.php but now i can access like : Code: http: //www. mysite. com/index.php but the problem is that i can access this from my computer only.. how can i use it from internet.. please help me.... Thanks.

  Read the article

• Loggon to Internet Hotspot from within Linux Terminal

  - by Saif Bechan

  For internet I use a local Hotspot service. I have internet when I start my browser and fill in my username and password. This stays as long as I do not shut down my PC for a while. I run some virtual machines, centos, debian, from the command line. I run these just for small test purposes, nothing special, and security is not an issue for me at all. I want to have these VM's connect directly to the hotspot if this is possible. So they each have there own IP. I have enough hotspot accounts to do so. I can do this with a bridged connection in VMware which works find with a GUI. But I run these OS's from the command line. I only need to know a way how to get the hotspot to validate my credentials. Is there a way of doing this without having a gui.

  Read the article

• What type of VPS stats should I look for?

  - by Dave

  I have a few websites that average a total of 10,000 uniques a day across my network. I also have a few mobile apps that pull xml data maybe 5,000 calls a day. My sites aren't anything major just a few wallpaper websites and few other small sites, nothing real database intensive. I currently own a dedicated server and I feel like it's overkill for my network. I'm looking into getting a Virtual Private Server (VPS). I was just wondering what kind of stats I should be looking for to support my network of sites. Thanks

  Read the article

• XP boot timer=> set, but does nothing?

  - by mark

  My PC has XP Pro and the boot.ini file looks like this: [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(2)\windows [operating systems] C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons multi(0)disk(0)rdisk(0)partition(2)\windows="eXPee Pro" /noexecute=optin /fastdetect Up until about a week ago it would just time-out and boot normally. I haven't made any hardware changes at all. Now, when the system boots it just sits there and waits for me to hit -enter-. I've searched all over for explanations & possible causes, but found nothing which seems to relate. Anyone here have any idea what may have caused the timer to simply quit working like that ? (BTW, the system clock works just as it ever did and keeps time precisely.) Thanks.

  Read the article

• SOHO Netflix and network security

  - by TW

  I want to use WIFI for HiDef video, but I don't trust it for my office PC's. I've heard of VLANs but I have no idea how to set it up or what (SOHO) hardware to buy. Other than getting 2 different DSL lines, how can I be absolutely sure that the PC side doesn't get hacked? What if I want to use MS Home server as a backup device for both sides? Can I make it "read only" for the PC side, and physically change the cable if I need to restore? TW

  Read the article

• startx doesnt run gives an error xauth unable to link authority files

  - by Sandeep

  I have installed windows xp on VPC and have installed cygwin-x on that virtual machine. When i run startx command. I get the following error: xauth: creating new authority file /home/Administrator/.serverauth.1480 xauth: unable to link authority file /home/Administrator/.serverauth.1480, use /home/Administrator/.serverauth.1480-n xauth: creating new authority file /home/Administrator/.Xauthority xauth: creating new authority file /home/Administrator/.Xauthority xauth: unable to link authority file /home/Administrator/.Xauthority, use /home /Administrator/.Xauthority-n xauth: creating new authority file /home/Administrator/.Xauthority xauth: creating new authority file /home/Administrator/.Xauthority xauth: unable to link authority file /home/Administrator/.Xauthority, use /home /Administrator/.Xauthority-n giving up. xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error. xauth: creating new authority file /home/Administrator/.Xauthority

  Read the article

• startx doesnt run gives an error xauth unable to link authority files

  - by Sandeep

  I have installed windows xp on VPC and have installed cygwin-x on that virtual machine. When i run startx command. I get the following error: xauth: creating new authority file /home/Administrator/.serverauth.1480 xauth: unable to link authority file /home/Administrator/.serverauth.1480, use /home/Administrator/.serverauth.1480-n xauth: creating new authority file /home/Administrator/.Xauthority xauth: creating new authority file /home/Administrator/.Xauthority xauth: unable to link authority file /home/Administrator/.Xauthority, use /home /Administrator/.Xauthority-n xauth: creating new authority file /home/Administrator/.Xauthority xauth: creating new authority file /home/Administrator/.Xauthority xauth: unable to link authority file /home/Administrator/.Xauthority, use /home /Administrator/.Xauthority-n giving up. xinit: No such file or directory (errno 2): unable to connect to X server xinit: No such process (errno 3): Server error. xauth: creating new authority file /home/Administrator/.Xauthority

  Read the article

< Previous Page | 408 409 410 411 412 413 414 415 416 417 418 419  | Next Page >