Search Results

Search found 15218 results on 609 pages for 'scoped array'.

Page 414/609 | < Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >

  • How to get both PIPESTATUS and output in bash script

    - by Mustafa Serdar Sanli
    I'm trying to get last modification date of a file with this command TM_LOCAL=`ls -l --time-style=long-iso ~/.vimrc | awk '{ print $6" "$7 }'` TM_LOCAL has value like "2012-05-16 23:18" after execution of this line I'd also like to check PIPESTATUS to see if there was an error. For example if file does not exists, ls returns 2. But $? has value 0 as it has the return value of awk. If I run this command alone, I can check the return value of ls by looking at ${PIPESTATUS[0]} ls -l --time-style=long-iso ~/.vimrc | awk '{ print $6" "$7 }' But $PIPESTATUS does not work as I've expected if I assign the output to a variable as in the first example. In this case, $PIPESTATUS array has only 1 element which is same as $? So, the question is, how can I get both $PIPESTATUS and assign the output to a variable at the same time?

    Read the article

  • Very slow disk performance on Dell PowerEdge 2950 w/ PERC 6/i running RAID 10

    - by vocoder
    I recently set up a server running Ubuntu 10.04 LTS on a Dell PowerEdge 2950 server - it has 6 500 gb 7200RPM SATA drives setup in a RAID 10 config. I am seeing extremely poor disk performance - the RAID array reports all disks are normal and using MegaCLI, it looks like the BBU is fine. hdparm -tT /dev/sda reports: Timing cached reads: 90 MB in 2.05 seconds = 43.96 MB/sec Timing buffered disk reads: 24 MB in 3.11 seconds = 7.72 MB/sec So as you can see, it takes forever to something as simple as an apt-get upgrade and even logging into the server. How do I go about troubleshooting what is causing this? I upgraded the firmware on the PERC 6i RAID controller to the latest, but didn't see any improvements.

    Read the article

  • GetData() error creating framebuffer

    - by Lelezeus
    I'm currently porting a game written in C# with XNA library to Android with Monogame. I have a Texture2D and i'm trying to get an array of uint in this way: Texture2d textureDeform = game.Content.Load<Texture2D>("Texture/terrain"); uint[] pixelDeformData = new uint[textureDeform.Width * textureDeform.Height]; textureDeform.GetData(pixelDeformData, 0, textureDeform.Width * textureDeform.Height); I get the following exception: System.Exception: Error creating framebuffer: Zero at Microsoft.Xna.Framework.Graphics.Texture2D.GetTextureData (Int32 ThreadPriorityLevel) [0x00000] in :0 I found that the problem is in private byte[] GetTextureData(int ThreadPriorityLevel) creating the framebuffer: private byte[] GetTextureData(int ThreadPriorityLevel) { int framebufferId = -1; int renderBufferID = -1; GL.GenFramebuffers(1, ref framebufferId); // framebufferId is still -1 , why can't be created? GraphicsExtensions.CheckGLError(); GL.BindFramebuffer(All.Framebuffer, framebufferId); GraphicsExtensions.CheckGLError(); //renderBufferIDs = new int[currentRenderTargets]; GL.GenRenderbuffers(1, ref renderBufferID); GraphicsExtensions.CheckGLError(); // attach the texture to FBO color attachment point GL.FramebufferTexture2D(All.Framebuffer, All.ColorAttachment0, All.Texture2D, this.glTexture, 0); GraphicsExtensions.CheckGLError(); // create a renderbuffer object to store depth info GL.BindRenderbuffer(All.Renderbuffer, renderBufferID); GraphicsExtensions.CheckGLError(); GL.RenderbufferStorage(All.Renderbuffer, All.DepthComponent24Oes, Width, Height); GraphicsExtensions.CheckGLError(); // attach the renderbuffer to depth attachment point GL.FramebufferRenderbuffer(All.Framebuffer, All.DepthAttachment, All.Renderbuffer, renderBufferID); GraphicsExtensions.CheckGLError(); All status = GL.CheckFramebufferStatus(All.Framebuffer); if (status != All.FramebufferComplete) throw new Exception("Error creating framebuffer: " + status); ... } The frameBufferId is still -1, seems that framebuffer could not be generated and I don't know why. Any help would be appreciated, thank you in advance.

    Read the article

  • Install Win7 on Dell XPS1730: CD Driver missing

    - by Mies75
    Vista crashed on my DELL XPS 1730 laptop. Again. I deleted the RAID array, created a new one and started to install Window 7 from DVD. During the initial phase of installation the setup pop ups this: Load Driver: A required CD/DVD device driver is missing... I can then insert other media to load the drivers, but it can't find any. I checked the DELL site for drivers but I can only find firmware for the drive. Which driver do I need, and where can I download it?

    Read the article

  • The Oracle OpenWorld 2012 Call for Papers Closes April 9

    - by Kerrie Foy
    It is On! Oracle OpenWorld 2012 Call for Papers is closes April 9.   This year's OpenWorld event is September 30  - October 4, Moscone Center, San Francisco. Oracle OpenWorld is among the world’s largest industry events for good reason. It offers a vast array of learning and networking opportunities in one of the planet’s great cities.  And one of the key reasons for its popularity is the prominence of presentations by customers. If you would like to deliver a presentation based on your experience, now is the time to submit your abstract for review by the selection panel. The competition is strong: roughly 18% of entries are accepted each year from more than 3,000 submissions. Review panels are made up of experts both internal and external to Oracle. Successful submissions often (but not exclusively) focus on customer successes, how-tos, or best practices. http://www.oracle.com/openworld/call-for-papers/information/index.html What is in it for you? Recognition, for one thing. Accepted sessions are publicized in the content catalog, which goes live in mid-June, and sessions given by external speakers often prove the most popular. Plus, accepted speakers get a complimentary pass to Oracle OpenWorld with access to all sessions and networking events- that could save you up to $2,595! Be sure designate your session for inclusion in the correct track by selecting  “APPLICATIONS: Product Lifecycle Management from the Primary Track drop down menu. Looking forward to seeing you at this year's OpenWorld!

    Read the article

  • RAID5 on SmartArray P410i online resize

    - by datacompboy
    I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't allows that, I think this might be because no battery is present. I have a redundant power supply. All data is mirrored over DRBD to a secondary server, so I can try to resize with a chance of loss of data in case of power failure, but I prefer to have an online resize.

    Read the article

  • Would you refactor this and if so, would you charge your client?

    - by Julius
    I am working on a freelance job at home. The client wants me to write some new functionality for his CMS, but it is taking me a lot of time to figure out what the code is doing, because it is written in a very unreadable style. Below is just an example of what I mean. The previous programmer made extensive use of anonymous functions, of eval(), he uses deeply nested ternary operators, he didn't indent code, didn't use comments, and he uses funny constructions like misusing the behaviour of logical operators || and && for creating if/else conditions (the second condition of && only gets tested if the first one is true, opening the possibility to use && as an if/else construction). All in all it's insane code and it's costing me a lot of time to find out how the current code works. return ($this->main->context != "ajax" || in_array($this->type, $this->definition->ajax)) ? eval('return method_exists($this,"Show'.ucfirst($this->type).'") ? $this->Show'.ucfirst($this->type).'('.(count($args) ? join(",",array_map(create_function('$a','return (is_numeric($a) || preg_match("/^array/",$a)) ? $a : "\"".$a."\"";'),$args)) : "").') : null;') : ''; Would you refactor this code and how would you handle this sort of thing with your client, I mean financially?

    Read the article

  • Is there any way to use arrays in a puppet module (not in template)?

    - by KARASZI István
    I want to use puppet to manage a hadoop cluster. On the machines we have several directories which must be created and set permissions. But i'm unable to add array values for defined methods. define hdfs_site( $dirs ) { file { $dirs: ensure => directory, owner => "hadoop", group => "hadoop", mode => 755; } file { "/opt/hadoop/conf/hdfs-site.xml": content => template("hdfs-site.xml.erb"), owner => "root", group => "root", mode => 644; } } define hadoop_slave( $mem, $cpu, $dirs ) { hadoop_base { mem => $mem, cpu => $cpu, } hdfs_site { dirs => $dirs, } } hadoop_base is similar to hdfs_site. Thanks!

    Read the article

  • What software can I use to pinpoint why Windows Server 2003 takes 15 seconds for any operation?

    - by Dr. Zim
    Ram is about 1/2 in use, four CPUs are all but idle. I tried "Microsoft Server Performance Advisor" with no luck. No entries in the Event Log for hardware failures, etc. And yet I can click on the start menu and wait 15 seconds for any new attempt. Launching software takes 30 seconds to respond. The server has an 8 drive WD RE 250 gig each Dell Perc 6 Sata raid array with Intel gigabit network cards. Anyone have any software titles that could analyze what is going wrong with this server?

    Read the article

  • Sorting versus hashing

    - by Paul Siegel
    My problem is as follows. I have an array of n strings with m < n of them distinct. I want to create a one-to-one function which assigns each of the m distinct strings to the numbers 0 ... m-1. For example, if my strings are: Bob, Amy, Bob, Charlie, Amy then the function: Bob -> 0, Amy -> 1, Charlie -> 2 would meet my needs. I have thought of three possible approaches: Sort the list of strings, remove duplicates, and construct the function using a search algorithm. Create a hash table and check each string to see if it is already in the table before inserting it. Sort the list of strings, remove duplicates, and put the resulting list into a hash table. My code will be written in Java, and I will likely use standard Java algorithms: merge sort for sorting, binary search for searching, and whatever the standard Java hash table algorithm is. Question: Assume that after creating the function I will have to evaluate it on each of the n original strings. Which of the three approaches is fastest? Is there a better way? Part of the problem is that I don't really know what's going on "under the hood" in standard hashing algorithms. Any help would be appreciated.

    Read the article

  • Best algorithm for recursive adjacent tiles?

    - by OhMrBigshot
    In my game I have a set of tiles placed in a 2D array marked by their Xs and Zs ([1,1],[1,2], etc). Now, I want a sort of "Paint Bucket" mechanism: Selecting a tile will destroy all adjacent tiles until a condition stops it, let's say, if it hits an object with hasFlag. Here's what I have so far, I'm sure it's pretty bad, it also freezes everything sometimes: void destroyAdjacentTiles(int x, int z) { int GridSize = Cubes.GetLength(0); int minX = x == 0 ? x : x-1; int maxX = x == GridSize - 1 ? x : x+1; int minZ = z == 0 ? z : z-1; int maxZ = z == GridSize - 1 ? z : z+1; Debug.Log(string.Format("Cube: {0}, {1}; X {2}-{3}; Z {4}-{5}", x, z, minX, maxX, minZ, maxZ)); for (int curX = minX; curX <= maxX; curX++) { for (int curZ = minZ; curZ <= maxZ; curZ++) { if (Cubes[curX, curZ] != Cubes[x, z]) { Debug.Log(string.Format(" Checking: {0}, {1}", curX, curZ)); if (Cubes[curX,curZ] && Cubes[curX,curZ].GetComponent<CubeBehavior>().hasFlag) { Destroy(Cubes[curX,curZ]); destroyAdjacentTiles(curX, curZ); } } } } }

    Read the article

  • Down Tools Week Cometh: Kissing Goodbye to CVs/Resumes and Cover Letters

    - by Bart Read
    I haven't blogged about what I'm doing in my (not so new) temporary role as Red Gate's technical recruiter, mostly because it's been routine, business as usual stuff, and because I've been trying to understand the role by doing it. I think now though the time has come to get a little more radical, so I'm going to tell you why I want to largely eliminate CVs/resumes and cover letters from the application process for some of our technical roles, and why I think that might be a good thing for candidates (and for us). I have a terrible confession to make, or at least it's a terrible confession for a recruiter: I don't really like CV sifting, or reading cover letters, and, unless I've misread the mood around here, neither does anybody else. It's dull, it's time-consuming, and it's somewhat soul destroying because, when all is said and done, you're being paid to be incredibly judgemental about people based on relatively little information. I feel like I've dirtied myself by saying that - I mean, after all, it's a core part of my job - but it sucks, it really does. (And, of course, the truth is I'm still a software engineer at heart, and I'm always looking for ways to do things better.) On the flip side, I've never met anyone who likes writing their CV. It takes hours and hours of faffing around and massaging it into shape, and the whole process is beset by a gnawing anxiety, frustration, and insecurity. All you really want is a chance to demonstrate your skills - not just talk about them - and how do you do that in a CV or cover letter? Often the best candidates will include samples of their work (a portfolio, screenshots, links to websites, product downloads, etc.), but sometimes this isn't possible, or may not be appropriate, or you just don't think you're allowed because of what your school/university careers service has told you (more commonly an issue with grads, obviously). And what are we actually trying to find out about people with all of this? I think the common criteria are actually pretty basic: Smart Gets things done (thanks for these two Joel) Not an a55hole* (sorry, have to get around Simple Talk's swear filter - and thanks to Professor Robert I. Sutton for this one) *Of course, everyone has off days, and I don't honestly think we're too worried about somebody being a bit grumpy every now and again. We can do a bit better than this in the context of the roles I'm talking about: we can be more specific about what "gets things done" means, at least in part. For software engineers and interns, the non-exhaustive meaning of "gets things done" is: Excellent coder For test engineers, the non-exhaustive meaning of "gets things done" is: Good at finding problems in software Competent coder Team player, etc., to me, are covered by "not an a55hole". I don't expect people to be the life and soul of the party, or a wild extrovert - that's not what team player means, and it's not what "not an a55hole" means. Some of our best technical staff are quiet, introverted types, but they're still pleasant to work with. My problem is that I don't think the initial sift really helps us find out whether people are smart and get things done with any great efficacy. It's better than nothing, for sure, but it's not as good as it could be. It's also contentious, and potentially unfair/inequitable - if you want to get an idea of what I mean by this, check out the background information section at the bottom. Before I go any further, let's look at the Red Gate recruitment process for technical staff* as it stands now: (LOTS of) People apply for jobs. All these applications go through a brutal process of manual sifting, which eliminates between 75 and 90% of them, depending upon the role, and the time of year**. Depending upon the role, those who pass the sift will be sent an assessment or telescreened. For the purposes of this blog post I'm only interested in those that are sent some sort of programming assessment, or bug hunt. This means software engineers, test engineers, and software interns, which are the roles for which I receive the most applications. The telescreen tends to be reserved for project or product managers. Those that pass the assessment are invited in for first interview. This interview is mostly about assessing their technical skills***, although we're obviously on the look out for cultural fit red flags as well. If the first interview goes well we'll invite candidates back for a second interview. This is where team/cultural fit is really scoped out. We also use this interview to dive more deeply into certain areas of their skillset, and explore any concerns that may have come out of the first interview (these obviously won't have been serious or obvious enough to cause a rejection at that point, but are things we do need to look into before we'd consider making an offer). We might subsequently invite them in for lunch before we make them an offer. This tends to happen when we're recruiting somebody for a specific team and we'd like them to meet all the people they'll be working with directly. It's not an interview per se, but can prove pivotal if they don't gel with the team. Anyone who's made it this far will receive an offer from us. *We have a slightly quirky definition of "technical staff" as it relates to the technical recruiter role here. It includes software engineers, test engineers, software interns, user experience specialists, technical authors, project managers, product managers, and development managers, but does not include product support or information systems roles. **For example, the quality of graduate applicants overall noticeably drops as the academic year wears on, which is not to say that by now there aren't still stars in there, just that they're fewer and further between. ***Some organisations prefer to assess for team fit first, but I think assessing technical skills is a more effective initial filter - if they're the nicest person in the world, but can't cut a line of code they're not going to work out. Now, as I suggested in the title, Red Gate's Down Tools Week is upon us once again - next week in fact - and I had proposed as a project that we refactor and automate the first stage of marking our programming assessments. Marking assessments, and in fact organising the marking of them, is a somewhat time-consuming process, and we receive many assessment solutions that just don't make the cut, for whatever reason. Whilst I don't think it's possible to fully automate marking, I do think it ought to be possible to run a suite of automated tests over each candidate's solution to see whether or not it behaves correctly and, if it does, move on to a manual stage where we examine the code for structure, decomposition, style, readability, maintainability, etc. Obviously it's possible to use tools to generate potentially helpful metrics for some of these indices as well. This would obviously reduce the marking workload, and would provide candidates with quicker feedback about whether they've been successful - though I do wonder if waiting a tactful interval before sending a (nicely written) rejection might be wise. I duly scrawled out a picture of my ideal process, which looked like this: The problem is, as soon as I'd roughed it out, I realised that fundamentally it wasn't an ideal process at all, which explained the gnawing feeling of cognitive dissonance I'd been wrestling with all week, whilst I'd been trying to find time to do this. Here's what I mean. Automated assessment marking, and the associated infrastructure around that, makes it much easier for us to deal with large numbers of assessments. This means we can be much more permissive about who we send assessments out to or, in other words, we can give more candidates the opportunity to really demonstrate their skills to us. And this leads to a question: why not give everyone the opportunity to demonstrate their skills, to show that they're smart and can get things done? (Two or three of us even discussed this in the down tools week hustings earlier this week.) And isn't this a lot simpler than the alternative we'd been considering? (FYI, this was automated CV/cover letter sifting by some form of textual analysis to ideally eliminate the worst 50% or so of applications based on an analysis of the 20,000 or so historical applications we've received since 2007 - definitely not the basic keyword analysis beloved of recruitment agencies, since this would eliminate hardly anyone who was awful, but definitely would eliminate stellar Oxbridge candidates - #fail - or some nightmarishly complex Google-like system where we profile all our currently employees, only to realise that we're never going to get representative results because we don't have a statistically significant sample size in any given role - also #fail.) No, I think the new way is better. We let people self-select. We make them the masters (or mistresses) of their own destiny. We give applicants the power - we put their fate in their hands - by giving them the chance to demonstrate their skills, which is what they really want anyway, instead of requiring that they spend hours and hours creating a CV and cover letter that I'm going to evaluate for suitability, and make a value judgement about, in approximately 1 minute (give or take). It doesn't matter what university you attended, it doesn't matter if you had a bad year when you took your A-levels - here's your chance to shine, so take it and run with it. (As a side benefit, we cut the number of applications we have to sift by something like two thirds.) WIN! OK, yeah, sounds good, but will it actually work? That's an excellent question. My gut feeling is yes, and I'll justify why below (and hopefully have gone some way towards doing that above as well), but what I'm proposing here is really that we run an experiment for a period of time - probably a couple of months or so - and measure the outcomes we see: How many people apply? (Wouldn't be surprised or alarmed to see this cut by a factor of ten.) How many of them submit a good assessment? (More/less than at present?) How much overhead is there for us in dealing with these assessments compared to now? What are the success and failure rates at each interview stage compared to now? How many people are we hiring at the end of it compared to now? I think it'll work because I hypothesize that, amongst other things: It self-selects for people who really want to work at Red Gate which, at the moment, is something I have to try and assess based on their CV and cover letter - but if you're not that bothered about working here, why would you complete the assessment? Candidates who would submit a shoddy application probably won't feel motivated to do the assessment. Candidates who would demonstrate good attention to detail in their CV/cover letter will demonstrate good attention to detail in the assessment. In general, only the better candidates will complete and submit the assessment. Marking assessments is much less work so we'll be able to deal with any increase that we see (hopefully we will see). There are obviously other questions as well: Is plagiarism going to be a problem? Is there any way we can detect/discourage potential plagiarism? How do we assess candidates' education and experience? What about their ability to communicate in writing? Do we still want them to submit a CV afterwards if they pass assessment? Do we want to offer them the opportunity to tell us a bit about why they'd like the job when they submit their assessment? How does this affect our relationship with recruitment agencies we might use to hire for these roles? So, what's the objective for next week's Down Tools Week? Pretty simple really - we want to implement this process for the Graduate Software Engineer and Software Engineer positions that you can find on our website. I will be joined by a crack team of our best developers (Kevin Boyle, and new Red-Gater, Sam Blackburn), and recruiting hostess with the mostest Laura McQuillen, and hopefully a couple of others as well - if I can successfully twist more arms before Monday.* Hopefully by next Friday our experiment will be up and running, and we may have changed the way Red Gate recruits software engineers for good! Stay tuned and we'll let you know how it goes! *I'm going to play dirty by offering them beer and chocolate during meetings. Some background information: how agonising over the initial CV/cover letter sift helped lead us to bin it off entirely The other day I was agonising about the new university/good degree grade versus poor A-level results issue, and decided to canvas for other opinions to see if there was something I could do that was fairer than my current approach, which is almost always to reject. This generated quite an involved discussion on our Yammer site: I'm sure you can glean a pretty good impression of my own educational prejudices from that discussion as well, although I'm very open to changing my opinion - hopefully you've already figured that out from reading the rest of this post. Hopefully you can also trace a logical path from agonising about sifting to, "Uh, hang on, why on earth are we doing this anyway?!?" Technorati Tags: recruitment,hr,developers,testers,red gate,cv,resume,cover letter,assessment,sea change

    Read the article

  • DB API for shell scripting (any shell)

    - by foampile
    I am faced with some legacy shell scripts that run batch data processing jobs in Oracle using SQL+. For the most part, the data tier does not have to communicate back to the script with retrieved data to be passed for shell-level processing but in a few cases it does. The problem is, SQL+ is really meant to be an end user app and not an API that can communicate with other clients programmaticaly. That is why people have invented APIs such as DBD::DBI for Perl, JDBC for Java, ODBC etc. The way it is done is they invoke SQL+ and then parse the output, which is clearly designed for human eye consumption, using tools like sed and awk. The whole thing is at best a hack and very prone to bugs. Since this client is rather conservative with their technology, they don't want to scale their scripts up to Perl or Python where there are data access APIs. So I am wondering whether there are similar APIs for shell, e.g. K or bash. What I would like is if an API would return data in a 2-dimensional array or strings (for the lack of type setting) so that I can just read DB data like that. The way they do it now is akin to parsing regular web page HTML to get a single stock quote rather than cleanly calling a web service and be done with it. Anybody know of a product I can use? Thanks

    Read the article

  • Could not log-in properly but shows no error in joomla

    - by saeha
    This is what I did, I added variables in \libraries\joomla\database\table\user.php: var $img_content= null; //contains the blob type data var $img_name = null; var $img_type = null; then I added this code in \components\com_user\controller.php: $file = JRequest::getVar( 'pic', '', 'files', 'array' ); if(isset($file['name'])) { jimport('joomla.filesystem.file'); $fileName = $file['name']; $tmpName = $file['tmp_name']; $fileSize = $file['size']; $fileType = $file['type']; $fp = fopen($tmpName, 'r'); $content = fread($fp, filesize($tmpName)); //$content = addslashes($content); fclose($fp); $user->set('img_name', $fileName); $user->set('img_type', $fileType); $user->set('img_content', $content); } that works fine, but I found this problem in logging in with the new user with an uploaded photo, other user with an empty img_content field could login properly. What happens is when I log-in using the user with uploaded photo, it's not redirecting properly it just return to log-in, but when i log-in through backend using other user which is super admin, i could see that user which appears as logged in. I started saving the images in the database because I am having problem with the directory when I have uploaded the site. I think the log-in was affected by the blob type data in the database. Could that be the problem? What could be the solution? -saeha

    Read the article

  • What is the best way to "carve" a terrain created from a heightmap?

    - by tigrou
    I have a 3d landscape created from a heightmap. I'd like to "carve" some holes in that terrain. That will allow me to create bridges, caverns and tunnels inside it. That operation will be done in the game editor so it doesn't need to be realtime. In the end, rendering is done using traditional polygons. What would be the best/easiest way to do that ? I already think about several solutions : Solution 1 1) Create voxels from the heightmap (very easy). In other words, fill a 3D array like this : voxels[32][32][32] from the heightmap values. 2) Carve holes in the voxels as i want (easy too). 3) Convert voxels to polygons using some iso-surface extraction technique (like marching cubes). 4) Reduce (decimate) polygons created in 3). This technique seems to be the most promising for giving good results (untested). However the problem with marching cubes is that they tends to produce lots of polygons thus reducing them is mandatory. Implementing 4) also seems not trivial, i have read several papers on the web and it seems pretty complex. I was also unable to find an example, code snippet or something to start writing an algorithm for triangle mesh decimation. Maybe there is a special decimation algorithm (simpler) for meshes created from marching cubes ? Solution 2 1) Create some triangle mesh from the heighmap (easy). 2) Apply severals 3D boolean operation (eg: subtraction with a sphere) to carve the mesh. 3) apply some procedure to reduce polygons (optional). Operation 2) seems to be very complex and to be honest i have no idea how to do that. Also applying many boolean operation seems to be slow and will maybe degrade the triangle mesh every time a boolean operation is applied.

    Read the article

  • CodeIgniter's Scaffolding not working

    - by 01010011
    Hi, I keep getting a 404 Page Not Found whenever I try to access CodeIgniter's Scaffolding page in my browser, like so: localhost/codeignitor/index.php/blog/scaffolding/mysecretword I can access localhost/codeignitor/index.php/blog just fine. I followed CodeIgnitor's instructions in their "Create a blog in 20 minutes" by storing my database settings in the database.php file; and automatically connecting to the database by inserting "database" in the core array of the autoload.php; and I've added both parent::Controller(); and $this-load-scaffolding('myTableName') to blog's constructor. It still gives me this 404. Any suggestions?

    Read the article

  • Data drive disappearing.

    - by Mike Keller
    We have a Windows 2003 R2 server with SP 2 here that randomly loses a partition. There are two partitions the C: and the D: (the one that disappears). When I go into Disk Management the space shows available on the drive but that it isn't formated. There are two drives that are set up in a RAID 1 array. There isn't anything sticking out in the event log as to something triggering this problem and thank god we do daily backups of the data, but it gets kind of annoying to have to go back in there and reformat the partition and restore the data. Any places I can poke around to find the cause of this or even better solutions to the problem would be appreciated.

    Read the article

  • grub crc error after decompressing linux

    - by w00t
    Hi, I have a debian with a raid1 on it. Both HDDs have bootable flags and grub setup in MBR. If I only start up with sda, linux boots. If I only start up with sdb, grub shows up and says Decompressing Linux... crc error -- System halted I have reinstalled grub a few times now but still nothing. It goes like this: /dev/md0 contains /dev/sda1 /dev/sdb1 find /boot/grub/stage1 shows (hd0,1) (hd0,1) The line that boots Linux shows: root (hd0,0) kernel /vmlinuz-2.6.26-1-686 initrd /initrd.img-2.6.26-1-686 This kind of renders my "redundant" array useless. Any clues? update: just to mention, these are 2 different HDDs, sda is 320gb and sdb is 400gb. Both are WD and both have exactly the same partitions, cloned using sfdisk.

    Read the article

  • Is Linq having a mind-numbing effect on .NET programmers?

    - by Aaronaught
    A lot of us started seeing this phenomenon with jQuery about a year ago when people started asking how to do absolutely insane things like retrieve the query string with jQuery. The difference between the library (jQuery) and the language (JavaScript) is apparently lost on many programmers, and results in a lot of inappropriate, convoluted code being written where it is not necessary. Maybe it's just my imagination, but I swear I'm starting to see an uptick in the number of questions where people are asking to do similarly insane things with Linq, like find ranges in a sorted array. I can't get over how thoroughly inappropriate the Linq extensions are for solving that problem, but more importantly the fact that the author just assumed that the ideal solution would involve Linq without actually thinking about it (as far as I can tell). It seems that we are repeating history, breeding a new generation of .NET programmers who can't tell the difference between the language (C#/VB.NET) and the library (Linq). What is responsible for this phenomenon? Is it just hype? Magpie tendencies? Has Linq picked up a reputation as a form of magic, where instead of actually writing code you just have to utter the right incantation? I'm hardly satisfied with those explanations but I can't really think of anything else. More importantly, is it really a problem, and if so, what's the best way to help enlighten these people?

    Read the article

  • A Look Inside JSR 360 - CLDC 8

    - by Roger Brinkley
    If you didn't notice during JavaOne the Java Micro Edition took a major step forward in its consolidation with Java Standard Edition when JSR 360 was proposed to the JCP community. Over the last couple of years there has been a focus to move Java ME back in line with it's big brother Java SE. We see evidence of this in JCP itself which just recently merged the ME and SE/EE Executive Committees into a single Java Executive Committee. But just before that occurred JSR 360 was proposed and approved for development on October 29. So let's take a look at what changes are now being proposed. In a way JSR 360 is returning back to the original roots of Java ME when it was first introduced. It was indeed a subset of the JDK 4 language, but as Java progressed many of the language changes were not implemented in the Java ME. Back then the tradeoff was still a functionality, footprint trade off but the major market was feature phones. Today the market has changed and CLDC, while it will still target feature phones, will have it primary emphasis on embedded devices like wireless modules, smart meters, health care monitoring and other M2M devices. The major changes will come in three areas: language feature changes, library changes, and consolidating the Generic Connection Framework.  There have been three Java SE versions that have been implemented since JavaME was first developed so the language feature changes can be divided into changes that came in JDK 5 and those in JDK 7, which mostly consist of the project Coin changes. There were no language changes in JDK 6 but the changes from JDK 5 are: Assertions - Assertions enable you to test your assumptions about your program. For example, if you write a method that calculates the speed of a particle, you might assert that the calculated speed is less than the speed of light. In the example code below if the interval isn't between 0 and and 1,00 the an error of "Invalid value?" would be thrown. private void setInterval(int interval) { assert interval > 0 && interval <= 1000 : "Invalid value?" } Generics - Generics add stability to your code by making more of your bugs detectable at compile time. Code that uses generics has many benefits over non-generic code with: Stronger type checks at compile time. Elimination of casts. Enabling programming to implement generic algorithms. Enhanced for Loop - the enhanced for loop allows you to iterate through a collection without having to create an Iterator or without having to calculate beginning and end conditions for a counter variable. The enhanced for loop is the easiest of the new features to immediately incorporate in your code. In this tip you will see how the enhanced for loop replaces more traditional ways of sequentially accessing elements in a collection. void processList(Vector<string> list) { for (String item : list) { ... Autoboxing/Unboxing - This facility eliminates the drudgery of manual conversion between primitive types, such as int and wrapper types, such as Integer.  Hashtable<Integer, string=""> data = new Hashtable<>(); void add(int id, String value) { data.put(id, value); } Enumeration - Prior to JDK 5 enumerations were not typesafe, had no namespace, were brittle because they were compile time constants, and provided no informative print values. JDK 5 added support for enumerated types as a full-fledged class (dubbed an enum type). In addition to solving all the problems mentioned above, it allows you to add arbitrary methods and fields to an enum type, to implement arbitrary interfaces, and more. Enum types provide high-quality implementations of all the Object methods. They are Comparable and Serializable, and the serial form is designed to withstand arbitrary changes in the enum type. enum Season {WINTER, SPRING, SUMMER, FALL}; } private Season season; void setSeason(Season newSeason) { season = newSeason; } Varargs - Varargs eliminates the need for manually boxing up argument lists into an array when invoking methods that accept variable-length argument lists. The three periods after the final parameter's type indicate that the final argument may be passed as an array or as a sequence of arguments. Varargs can be used only in the final argument position. void warning(String format, String... parameters) { .. for(String p : parameters) { ...process(p);... } ... } Static Imports -The static import construct allows unqualified access to static members without inheriting from the type containing the static members. Instead, the program imports the members either individually or en masse. Once the static members have been imported, they may be used without qualification. The static import declaration is analogous to the normal import declaration. Where the normal import declaration imports classes from packages, allowing them to be used without package qualification, the static import declaration imports static members from classes, allowing them to be used without class qualification. import static data.Constants.RATIO; ... double r = Math.cos(RATIO * theta); Annotations - Annotations provide data about a program that is not part of the program itself. They have no direct effect on the operation of the code they annotate. There are a number of uses for annotations including information for the compiler, compiler-time and deployment-time processing, and run-time processing. They can be applied to a program's declarations of classes, fields, methods, and other program elements. @Deprecated public void clear(); The language changes from JDK 7 are little more familiar as they are mostly the changes from Project Coin: String in switch - Hey it only took us 18 years but the String class can be used in the expression of a switch statement. Fortunately for us it won't take that long for JavaME to adopt it. switch (arg) { case "-data": ... case "-out": ... Binary integral literals and underscores in numeric literals - Largely for readability, the integral types (byte, short, int, and long) can also be expressed using the binary number system. and any number of underscore characters (_) can appear anywhere between digits in a numerical literal. byte flags = 0b01001111; long mask = 0xfff0_ff08_4fff_0fffl; Multi-catch and more precise rethrow - A single catch block can handle more than one type of exception. In addition, the compiler performs more precise analysis of rethrown exceptions than earlier releases of Java SE. This enables you to specify more specific exception types in the throws clause of a method declaration. catch (IOException | InterruptedException ex) { logger.log(ex); throw ex; } Type Inference for Generic Instance Creation - Otherwise known as the diamond operator, the type arguments required to invoke the constructor of a generic class can be replaced with an empty set of type parameters (<>) as long as the compiler can infer the type arguments from the context.  map = new Hashtable<>(); Try-with-resource statement - The try-with-resources statement is a try statement that declares one or more resources. A resource is an object that must be closed after the program is finished with it. The try-with-resources statement ensures that each resource is closed at the end of the statement.  try (DataInputStream is = new DataInputStream(...)) { return is.readDouble(); } Simplified varargs method invocation - The Java compiler generates a warning at the declaration site of a varargs method or constructor with a non-reifiable varargs formal parameter. Java SE 7 introduced a compiler option -Xlint:varargs and the annotations @SafeVarargs and @SuppressWarnings({"unchecked", "varargs"}) to supress these warnings. On the library side there are new features that will be added to satisfy the language requirements above and some to improve the currently available set of APIs.  The library changes include: Collections update - New Collection, List, Set and Map, Iterable and Iteratator as well as implementations including Hashtable and Vector. Most of the work is too support generics String - New StringBuilder and CharSequence as well as a Stirng formatter. The javac compiler  now uses the the StringBuilder instead of String Buffer. Since StringBuilder is synchronized there is a performance increase which has necessitated the wahat String constructor works. Comparable interface - The comparable interface works with Collections, making it easier to reuse. Try with resources - Closeable and AutoCloseable Annotations - While support for Annotations is provided it will only be a compile time support. SuppressWarnings, Deprecated, Override NIO - There is a subset of NIO Buffer that have been in use on the of the graphics packages and needs to be pulled in and also support for NIO File IO subset. Platform extensibility via Service Providers (ServiceLoader) - ServiceLoader interface dos late bindings of interface to existing implementations. It helpe to package an interface and behavior of the implementation at a later point in time.Provider classes must have a zero-argument constructor so that they can be instantiated during loading. They are located and instantiated on demand and are identified via a provider-configuration file in the METAINF/services resource directory. This is a mechansim from Java SE. import com.XYZ.ServiceA; ServiceLoader<ServiceA> sl1= new ServiceLoader(ServiceA.class); Resources: META-INF/services/com.XYZ.ServiceA: ServiceAProvider1 ServiceAProvider2 ServiceAProvider3 META-INF/services/ServiceB: ServiceBProvider1 ServiceBProvider2 From JSR - I would rather use this list I think The Generic Connection Framework (GCF) was previously specified in a number of different JSRs including CLDC, MIDP, CDC 1.2, and JSR 197. JSR 360 represents a rare opportunity to consolidated and reintegrate parts that were duplicated in other specifications into a single specification, upgrade the APIs as well provide new functionality. The proposal is to specify a combined GCF specification that can be used with Java ME or Java SE and be backwards compatible with previous implementations. Because of size limitations as well as the complexity of the some features like InvokeDynamic and Unicode 6 will not be included. Additionally, any language or library changes in JDK 8 will be not be included. On the upside, with all the changes being made, backwards compatibility will still be maintained. JSR 360 is a major step forward for Java ME in terms of platform modernization, language alignment, and embedded support. If you're interested in following the progress of this JSR see the JSR's java.net project for details of the email lists, discussions groups.

    Read the article

  • 2D/Isometric map algorithm

    - by Icarus Cocksson
    First of all, I don't have much experience on game development but I do have experience on development. I do know how to make a map, but I don't know if my solution is a normal or a hacky solution. I don't want to waste my time coding things, and realise they're utterly crap and lose my motivation. Let's imagine the following map. (2D - top view - A square) X: 0 to 500 Y: 0 to 500 My character currently stands at X:250,Y:400, somewhere near center of 100px above bottom and I can control him with my keyboard buttons. LEFT button does X--, UP button does Y-- etc. This one is kid's play. I'm asking this because I know there are some engines that automate this task. For example, games like Diablo 3 uses an engine. You can pretty much drag drop a rock to map, and it is automatically being placed here - making player unable to pass through/detect the collision. But what the engine exactly does in the background? Generates a map like mine, places a rock at the center, and checks it like: unmovableObjects = array('50,50'); //we placed a rock at 50,50 location if(Map.hasUnmovableObject(CurrentPlayerX, CurrentPlayerY)) { //unable to move } else { //able to move } My question is: Is this how 2D/Isometric maps are being generated or there is a different and more complex logic behind them?

    Read the article

  • What is better to have more LUNs or more Storages

    - by skomak
    Hi, what is better to have - more LUNs or more Storages. Actually i have 1 storage ESXi per 1 LUN so there are about 15 LUNs and 15 storages. Now there is a kind of problem because the LUNs have different space allocated so if i remove 2 LUNs f.e. 1 2 3 4 [x] 6 [x] 8 9 (like that) i can't make 1 LUN from 5 and 7 pieces of free diskspace on IBM storage array. It's a first argument to not have a lot of LUNs. If i had to make only a few LUNs (about 3) and inside some Storage from ESXi would it be a better idea? For example for expanding storage capacity? i look for good solutions. Thanks in advance.

    Read the article

  • Kernel panic error

    - by cioby23
    We have a dedicated server with software RAID1 and one of the disk failed recently. The disk was replaced but after rebuilding the array and rebooting the server freezes with a Kernel Panic message No filesystem could mount root, tried: reiserfs ext3 ext2 cramfs msdos vfat iso9660 romfs fuseblk xfs Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(9,1) The filesystem on both disks is ext4. It seems the kernel can't load ext4 support. Is there any way to add ext4 support or do I need to recompile a new kernel again ? Interesting point that before disk replacement all was fine. The kernel is a stock kernel bzImage-2.6.34.6-xxxx-grs-ipv6-64 from our provider OVH Kind regards,

    Read the article

  • How can I perform 2D side-scroller collision checks in a tile-based map?

    - by bill
    I am trying to create a game where you have a player that can move horizontally and jump. It's kind of like Mario but it isn't a side scroller. I'm using a 2D array to implement a tile map. My problem is that I don't understand how to check for collisions using this implementation. After spending about two weeks thinking about it, I've got two possible solutions, but both of them have some problems. Let's say that my map is defined by the following tiles: 0 = sky 1 = player 2 = ground The data for the map itself might look like: 00000 10002 22022 For solution 1, I'd move the player (the 1) a complete tile and update the map directly. This make the collision easy because you can check if the player is touching the ground simply by looking at the tile directly below the player: // x and y are the tile coordinates of the player. The tile origin is the upper-left. if (grid[x][y+1] == 2){ // The player is standing on top of a ground tile. } The problem with this approach is that the player moves in discrete tile steps, so the animation isn't smooth. For solution 2, I thought about moving the player via pixel coordinates and not updating the tile map. This will make the animation much smoother because I have a smaller movement unit per frame. However, this means I can't really accurately store the player in the tile map because sometimes he would logically be between two tiles. But the bigger problem here is that I think the only way to check for collision is to use Java's intersection method, which means the player would need to be at least a single pixel "into" the ground to register collision, and that won't look good. How can I solve this problem?

    Read the article

  • CodePlex Daily Summary for Sunday, January 09, 2011

    CodePlex Daily Summary for Sunday, January 09, 2011Popular ReleasesEnhSim: EnhSim 2.2.10 BETA: 2.2.10 BETAThis release supports WoW patch 4.03a at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Removed the part...TweetSharp: TweetSharp v2.0.0.0 - Preview 7: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 7 ChangesFixes the regression issue in OAuth from Preview 6 Preview 6 ChangesMaintenance release with user reported fixes Preview 5 ChangesMaintenance release with user reported fixes Third Party Library VersionsHammock v1.0.6: http://hammock.codeplex.com Json.NET 3.5 Release 8: http://json.codeplex.comExtended WPF Toolkit: Extended WPF Toolkit - 1.3.0: What's in the 1.3.0 Release?BusyIndicator ButtonSpinner ChildWindow ColorPicker - Updated (Breaking Changes) DateTimeUpDown - New Control Magnifier - New Control MaskedTextBox - New Control MessageBox NumericUpDown RichTextBox RichTextBoxFormatBar - Updated .NET 3.5 binaries and SourcePlease note: The Extended WPF Toolkit 3.5 is dependent on .NET Framework 3.5 and the WPFToolkit. You must install .NET Framework 3.5 and the WPFToolkit in order to use any features in the To...sNPCedit: sNPCedit v0.9d: added elementclient coordinate catcher to catch coordinates select a target (ingame) i.e. your char, npc or monster than click the button and coordinates+direction will be transfered to the selected row in the table corrected labels from Rot to Direction (because it is a vector)AutoLoL: AutoLoL v1.5.2: Implemented the Auto Updater Fix: Your settings will no longer be cleared with new releases of AutoLoL The mastery Editor and Browser now have their own tabs instead of nested tabs The Browser tab will only show the masteries matching ALL filters instead of just one Added a 'Browse' button in the Mastery Editor tab to open the Masteries Directory The Browser tab now shows a message when there are no mastery files in the Masteries Directory Fix: Fixed the Save As dialog again, for ...Ionics Isapi Rewrite Filter: 2.1 latest stable: V2.1 is stable, and is in maintenance mode. This is v2.1.1.25. It is a bug-fix release. There are no new features. 28629 29172 28722 27626 28074 29164 27659 27900 many documentation updates and fixes proper x64 build environment. This release includes x64 binaries in zip form, but no x64 MSI file. You'll have to manually install x64 servers, following the instructions in the documentation.StyleCop for ReSharper: StyleCop for ReSharper 5.1.14980.000: A considerable amount of work has gone into this release: Huge focus on performance around the violation scanning subsystem: - caching added to reduce IO operations around reading and merging of settings files - caching added to reduce creation of expensive objects Users should notice condsiderable perf boost and a decrease in memory usage. Bug Fixes: - StyleCop's new ObjectBasedEnvironment object does not resolve the StyleCop installation path, thus it does not return the correct path ...VivoSocial: VivoSocial 7.4.1: New release with bug fixes and updates for performance.SSH.NET Library: 2011.1.6: Fixes CommandTimeout default value is fixed to infinite. Port Forwarding feature improvements Memory leaks fixes New Features Add ErrorOccurred event to handle errors that occurred on different thread New and improve SFTP features SftpFile now has more attributes and some operations Most standard operations now available Allow specify encoding for command execution KeyboardInteractiveConnectionInfo class added for "keyboard-interactive" authentication. Add ability to specify bo....NET Extensions - Extension Methods Library for C# and VB.NET: Release 2011.03: Added lot's of new extensions and new projects for MVC and Entity Framework. object.FindTypeByRecursion Int32.InRange String.RemoveAllSpecialCharacters String.IsEmptyOrWhiteSpace String.IsNotEmptyOrWhiteSpace String.IfEmptyOrWhiteSpace String.ToUpperFirstLetter String.GetBytes String.ToTitleCase String.ToPlural DateTime.GetDaysInYear DateTime.GetPeriodOfDay IEnumberable.RemoveAll IEnumberable.Distinct ICollection.RemoveAll IList.Join IList.Match IList.Cast Array.IsNullOrEmpty Array.W...EFMVC - ASP.NET MVC 3 and EF Code First: EFMVC 0.5- ASP.NET MVC 3 and EF Code First: Demo web app ASP.NET MVC 3, Razor and EF Code FirstVidCoder: 0.8.0: Added x64 version. Made the audio output preview more detailed and accurate. If the chosen encoder or mixdown is incompatible with the source, the fallback that will be used is displayed. Added "Auto" to the audio mixdown choices. Reworked non-anamorphic size calculation to work better with non-standard pixel aspect ratios and cropping. Reworked Custom anamorphic to be more intuitive and allow display width to be set automatically (Thanks, Statick). Allowing higher bitrates for 6-ch....NET Voice Recorder: Auto-Tune Release: This is the source code and binaries to accompany the article on the Coding 4 Fun website. It is the Auto Tuner release of the .NET Voice Recorder application.BloodSim: BloodSim - 1.3.2.0: - Simulation Log is now automatically disabled and hidden when running 10 or more iterations - Hit and Expertise are now entered by Rating, and include option for a Racial Expertise bonus - Added option for boss to use a periodic magic ability (Dragon Breath) - Added option for boss to periodically Enrage, gaining a Damage/Attack Speed buffAllNewsManager.NET: AllNewsManager.NET 1.2.1: AllNewsManager.NET 1.2.1 It is a minor update from version 1.2xUnit.net - Unit Testing for .NET: xUnit.net 1.7 Beta: xUnit.net release 1.7 betaBuild #1533 Important notes for Resharper users: Resharper support has been moved to the xUnit.net Contrib project. Important note for TestDriven.net users: If you are having issues running xUnit.net tests in TestDriven.net, especially on 64-bit Windows, we strongly recommend you upgrade to TD.NET version 3.0 or later. This release adds the following new features: Added support for ASP.NET MVC 3 Added Assert.Equal(double expected, double actual, int precision)...Json.NET: Json.NET 4.0 Release 1: New feature - Added Windows Phone 7 project New feature - Added dynamic support to LINQ to JSON New feature - Added dynamic support to serializer New feature - Added INotifyCollectionChanged to JContainer in .NET 4 build New feature - Added ReadAsDateTimeOffset to JsonReader New feature - Added ReadAsDecimal to JsonReader New feature - Added covariance to IJEnumerable type parameter New feature - Added XmlSerializer style Specified property support New feature - Added ...ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.2: Atomic CMS 2.1.2 release notes Atomic CMS installation guide N2 CMS: 2.1: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes Support for auto-implemented properties ({get;set;}, based on contribution by And Poulsen) All-round improvements and bugfixes File manager improvements (multiple file upload, resize images to fit) New image gallery Infinite scroll paging on news Content templates First time with N2? Try the demo site Download one of the template packs (above) and open the proj...Mobile Device Detection and Redirection: 0.1.11.10: IMPORTANT CHANGESThis release changes the way some WURFL capabilities and attributes are exposed to .NET developers. If you cast MobileCapabilities to return some values then please read the Release Note before implementing this release. The following code snippet can be used to access any WURFL capability. For instance, if the device is a tablet: string capability = Request.Browser["is_tablet"]; SummaryNew attributes have been added to the redirect section: originalUrlAsQueryString If se...New Projects[OOBL] Projekt: Projekt iz kolegija Objektno Oblikovanje na Fakultetu Elektrotehnike i Racunarstva u Zagrebu.Aikido Glossary Reader: The Aikido Glossary Reader application makes it easier for Aikido students to search for Japanese terms used in martial arts training.AsyncFunc: AsyncFunc makes it easy to implement Event-based Asynchronous Pattern in .NET.BeijingAgricultureScience: ???????????BizTalk 5010 999 Generation: Create 5010 999 acknowledgement from the default 997 Generated by BizTalk ServerCheck if Knowledge Base fix is installed script: A handy script that checks if a knowledge base fix is installed or not.Coproject - rich project management: Coproject is a sample Silverlight application built on WCF RIA Services and Caliburn.Micro framework. It should demonstrate typical scenarios in business applications.DeskNote: DeskNote, makes taking and displaying a notes a lot easier. Have your notes on your desktop, write your notes in a text file and it will be automatically displayed on the desktop. DriveBackup: Are you tired of losing data? And do you sometimes forget to backup your data? Then this program is right for you, one-time setup with each new removable disk and after that Drive Backup instantly backs up your data in the background, without you pushing a button.ELSEngine XNA Game OS Engine: XNA Game Operating System Engine, designed to handle and make easy to use Interface, Interface assets, game screens, menus, controls, and more. Designed to be adaptable to XBOX or Windows, and to ANY style game.FermaProject: Team Ferma ProjectHalfNetworkNET: HalfNetworkNET makes it easier for <target user group> to <activity>. You'll no longer have to <activity>. It's developed in C++/CLILFS Record: LFS Record is a camera animation and video recording tool for Live for Speed users. It doesn't replace programs like Fraps 100%, but in most cases you'll find LFS Record allows a lot more freedom and control. It's developed in C# using WPF .net 4.MPC HC Web remote: A Web interface for Media Player Classic Home Cinema. Designed especialy for smart phones. Tested on Nokia 5800, but in theory it works on all smart phones with wifi & a browser.MSMS2CMP: Very simple application to swap particular strings (MSMS and CMPD number) in .mgf files (results from Mascot search engine used to identify proteins by mass spectrometry data). This might be a kind of example of using Regex and Text File I/OMy Now Playing to Twitter: A Simple WinForm Program that can get what user is playing in Winamp and send a status to Twitter. It's wrote in VB.Net but some source code is port of MiniTwitter(http://minitwitter.codeplex.com)and uses tagLib-sharp library(https://github.com/mono/taglib-sharp)RPM Header for .NET: RPM Header for .NET allows a developer to access the headers of RPM Package Manager files. It's developed in C#.SilverMenu: SilverMenu brings some of the menu functionality of Silverlight for Windows Phone 7 to the XNA world.Smartgrid Smartmeter GRYD: The GRYD smartgrid and Smartmeter project shows features and capabilities like Demand Response, Smart Home Appliance Load Curtailments, DMS integration with SCADA etc. GRYD, Gryd.org is to teach you the technology, this is only for personal use and not commercial use.WakeMeQt: WakeMeQt is a smart alarm for the Nokia n810 (and probably n800) internet tablets. Using a Nintendo Wii remote as the sensor it monitors your movements during sleep and chooses the optimal time to wake you. It's developed in C++ using the Qt framework.WPF SplitButton & MenuButton: This WPF SplitButton and MenuButton implementation aims to be more robust and visual attractive than the other WPF split buttons available on CodePlex and elsewhere. The code is based on David Anson's implementation made available on his blog.Y2XMas: Merry Chirstmas - Happy New Year 2011 software

    Read the article

< Previous Page | 410 411 412 413 414 415 416 417 418 419 420 421  | Next Page >