Search Results

Search found 16386 results on 656 pages for 'flash drive'.

Page 416/656 | < Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >

  • Does SetFileBandwidthReservation affect memory-mapped file performance?

    - by Ghostrider
    Does this function affect Memory-mapped file performance? Here's the problem I need to solve: I have two applications competing for disk access: "reader" and "updater". Whole system runs on Windows Server 2008 R2 x64 "Updater" constantly accesses disk in a linear manner, updating data. They system is set up in such a way that updater always has infinite data to update. Consider that it is constantly approximating a solution of a huge set of equations that takes up entire 2TB disk drive. Updater uses ReadFile and WriteFile to process data in a linear fashion. "Reader" is occasionally invoked by user to get some pieces of data. Usually user would read several 4kb blocks from the drive and stop. Occasionally user needs to read up to 100mb sequentially. In exceptional cases up to several gigabytes. Reader maps files to memory to get data it needs. What I would like to achieve is for "reader" to have absolute priority so that "updater" would completely stop if needed so that "reader" could get the data user needs ASAP. Is this problem solvable by using SetPriorityClass and SetFileBandwidthReservation calls? I would really hate to put synchronization login in "reader" and "updater" and rather have the OS take care of priorities.

    Read the article

  • MS Access 2003 - Failure to create MDE file: error VBA is corrupt?

    - by Justin
    Ok so this is a brand new snag I have run into. I am trying to launch a new MDE from my source MDB file, and it is locking up Access. So in my mdb, I am first compacting and repairing, and then selecting create a new mde (just as I have done many times before). It looks like it is starting the process, but never gets to where it compacts when it is done, and access is not responding. So after I force close the app, I look in the folder where I am trying to create the MDE to and I see there is a new access db1 file there. If I try to open that it gives me an error that says file not found, and then it says the Visual Basic for Applications is corrupt. The thing is, I just made a very simple adjustment to the code since last launching an mde, and after this I double and triple checked it...its not that because its just a simple open this form and close this one addition. I did however have my source mdb file on a disc that I copied to my laptop, and then tried to re link the tables to the network drive (had them linked to other tables on my local drive so that I could develop offline)?? PLEASE HELP!!!

    Read the article

  • Python GUI does not update until entire process is finished

    - by ccwhite1
    I have a process that gets a files from a directory and puts them in a list. It then iterates that list in a loop. The last line of the loop being where it should update my gui display, then it begins the loop again with the next item in the list. My problem is that it does not actually update the gui until the entire process is complete, which depending on the size of the list could be 30 seconds to over a minute. This gives the feeling of the program being 'hung' What I wanted it to do was to process one line in the list, update the gui and then continue. Where did I go wrong? The line to update the list is # Populate listview with drive contents. The print statements are just for debug. def populateList(self): print "populateList" sSource = self.txSource.Value sDest = self.txDest.Value # re-intialize listview and validated list self.listView1.DeleteAllItems() self.validatedMove = None self.validatedMove = [] #Create list of files listOfFiles = getList(sSource) #prompt if no files detected if listOfFiles == []: self.lvActions.Append([datetime.datetime.now(),"Parse Source for .MP3 files","No .MP3 files in source directory"]) #Populate list after both Source and Dest are chosen if len(sDest) > 1 and len(sDest) > 1: print "-iterate listOfFiles" for file in listOfFiles: sFilename = os.path.basename(file) sTitle = getTitle(file) sArtist = getArtist(file) sAlbum = getAblum(file) # Make path = sDest + Artist + Album sDestDir = os.path.join (sDest, sArtist) sDestDir = os.path.join (sDestDir, sAlbum) #If file exists change destination to *.copyX.mp3 sDestDir = self.defineDestFilename(os.path.join(sDestDir,sFilename)) # Populate listview with drive contents self.listView1.Append([sFilename,sTitle,sArtist,sAlbum,sDestDir]) #populate list to later use in move command self.validatedMove.append([file,sDestDir]) print "-item added to SourceDest list" else: print "-list not iterated"

    Read the article

  • How should I launch a Portable Python Tkinter application on Windows without ugliness?

    - by Andrew
    I've written a simple GUI program in python using Tkinter. Let's call this program 'gui.py'. My users run 'gui.py' on Windows machines from a USB key using Portable Python; installing anything on the host machine is undesirable. I'd like my users to run 'gui.py' by double-clicking an icon at the root of the USB key. My users don't care what python is, and they don't want to use a command prompt if they don't have to. I don't want them to have to care what drive letter the USB key is assigned. I'd like this to work on XP, Vista, and 7. My first ugly solution was to create a shortcut in the root directory of the USB key, and set the "Target" property of the shortcut to something like "(root)\App\pythonw.exe (root)\App\gui.py", but I couldn't figure out how to do a relative path in a windows shortcut, and using an absolute path like "E:" seems fragile. My next solution was to create a .bat script in the root directory of the USB key, something like this: @echo off set basepath=%~dp0 "%basepath%App\pythonw.exe" "%basepath%\App\gui.py" This doesn't seem to care what drive letter the USB key is assigned, but it does leave a DOS window open while my program runs. Functional, but ugly. Next I tried a .bat script like this: @echo off set basepath=%~dp0 start "" "%basepath%App\pythonw.exe" "%basepath%\App\gui.py" (See here for an explanation of the funny quoting) Now, the DOS window briefly flashes on screen before my GUI opens. Less ugly! Still ugly. How do real men deal with this problem? What's the least ugly way to start a python Tkinter GUI on a Windows machine from a USB stick?

    Read the article

  • GoogleAuthUtil: Daily Limit for Unauthenticated Use Exceeded

    - by Copa
    I am using the Google Client API and the GoogleAuthUtil.class to get access to the user's Google Drive Account. String scope = "oauth2:" + DriveScopes.DRIVE; String token = GoogleAuthUtil.getToken(getContext(), account.name, scope); This is the whole magic. It worked the whole day but since a couple of hours I receive the following message when sending API calls: com.google.api.client.googleapis.json.GoogleJsonResponseException: 403 Forbidden { "code": 403, "errors": [ { "domain": "usageLimits", "message": "Daily Limit for Unauthenticated Use Exceeded. Continued use requires signup.", "reason": "dailyLimitExceededUnreg", "extendedHelp": "https://code.google.com/apis/console" } ], "message": "Daily Limit for Unauthenticated Use Exceeded. Continued use requires signup." } I dont know how to use a API Key from the console instead of an oauth2 authentication. There are two different "getToken()" messages. One has four parameters and the description for the last one says: extras: Bundle containing additional information that may be relevant to the authentication scope. But what do these information should look like? What informations do I have to put in the Bundle?

    Read the article

  • Programatically rebuild .exd-files when loading VBA

    - by aspartame
    Hi, After updating Microsoft Office 2007 to Office 2010 some custom VBA scripts embedded in our software failed to compile with the following error message: Object library invalid or contains references to object definitions that could not be found. As far as I know, this error is a result of a security update from Microsoft (Microsoft Security Advisory 960715). When adding ActiveX-controls to VBA scripts, information about the controls are stored in cache files on the local hard drive (.exd-files). The security update modified some of these controls, but the .exd-files were not automatically updated. When the VBA scripts try to load the old versions of the controls stored in the cached files, the error occurs. These cache-files must be removed from the hard drive in order for the controls to load successfully (which will create new, updated .exd-files automatically). What I would like to do is to programatically (using Visual C++) remove the outdated .exd-files when our software loads. When opening a VBA project using CApcProject::ApcProject.Open I set the following flag:axProjectThrowAwayCompiledState. TestHR(ApcProject.Open(pHost, (MSAPC::AxProjectFlag) (MSAPC::axProjectNormal | MSAPC::axProjectThrowAwayCompiledState))); According to the documentation, this flag should cause the VBA project to be recompiled and the temporary files to be deleted and rebuilt. I've also tried to update the checksum of the host application type library which should have the same effect. However none of these fixes seem to do the job and I'm running out of ideas. Help is very much appreciated!

    Read the article

  • What is the right path for PHP includes on a Mac?

    - by skorned
    Running Mac OS X 10.5.8, with PHP 5.2.11 Pre-installed. Using Coda 1.6.10. I'm writing PHP files, and then preview them running from file, not server. This was working fine till I tried PHP includes. These don't work as a relative path, only as an absolute from the root of the drive. Is there any way I can use statements like include_once "common/header.php"; without specifying my entire file path like so : include_once "/Volumes/Macintosh HD/Users/neil/Desktop/Website/ColoredLists_v1.0/common/base.php"; ,where ColoredLists_v1.0 is the directory with all the website files in it. I tried solutions like prepending _SERVER[DOCUMENT_ROOT] or dirname(File) to the file paths, but that didn't work as the variables were not set. Is there any easy way to do this, or a configuration I can change so that it looks in a specific directory by default instead of looking at the drive root? Currently, echo_include_path shows .: When I include this line at the start of the script, it works: set_include_path('/Volumes/Macintosh HD/Users/neil/Desktop/Website/ColoredLists_v1.0'); However, if I want to do this for all my scripts, I can't seem to make the change permanent. Even after I edited the Unix include_path in my php.ini, it doesn't seem to work.

    Read the article

  • Batch script is not executed if chcp was called

    - by Andy
    Hello! I'm trying to delete some files with unicode characters in them with batch script (it's a requirement). So I run cmd and execute: > chcp 65001 Effectively setting codepage to UTF-8. And it works: D:\temp\1>dir Volume in drive D has no label. Volume Serial Number is 8C33-61BF Directory of D:\temp\1 02.02.2010 09:31 <DIR> . 02.02.2010 09:31 <DIR> .. 02.02.2010 09:32 508 1.txt 02.02.2010 09:28 12 delete.bat 02.02.2010 09:20 95 delete.cmd 02.02.2010 09:13 <DIR> Rún 02.02.2010 09:13 <DIR> ????? ??????? 3 File(s) 615 bytes 4 Dir(s) 11 576 438 784 bytes free D:\temp\1>rmdir Rún D:\temp\1>dir Volume in drive D has no label. Volume Serial Number is 8C33-61BF Directory of D:\temp\1 02.02.2010 09:56 <DIR> . 02.02.2010 09:56 <DIR> .. 02.02.2010 09:32 508 1.txt 02.02.2010 09:28 12 delete.bat 02.02.2010 09:20 95 delete.cmd 02.02.2010 09:13 <DIR> ????? ??????? 3 File(s) 615 bytes 3 Dir(s) 11 576 438 784 bytes free Then I put the same rmdir commands in batch script and save it in UTF-8 encoding. But when I run nothing happens, literally nothing: not even echo works from batch script in this case. Even saving script in OEM encoding does not help. So it seems that when I change codepage to UTF-8 in console, scripts just stop working. Does somebody know how to fix that?

    Read the article

  • How do I load PersistentDocuments into the same window

    - by Brad Stone
    I want to open NSPersistentDocuments and load them into the same window one at a time. I'm almost there but missing some steps. Hopefully someone can help me. I have a few saved documents on the hard drive. On launch my app opens to an untitled NSPersistentDocument and creates a separate NSWindowController. When I press the button to load file 1 off the hard drive the data appears in the fields but two things are wrong that I can see: 1) changing the data doesn't make the document dirty 2) choosing save updates the persistentstore (I know this because when I open the file again I see the changes) but I get an error: +entityForName: could not locate an NSManagedObjectModel for entity name 'Book' Here's my code which is in the WindowController that was launched initially with the untitled document. This code isn't perfect. For example, I know I should processPendingChanges and save the current doc before I load the new one. This is test code to try to get over this hurdle. - (IBAction)newBookTwo:(id)sender { NSDocumentController *dc = [NSDocumentController sharedDocumentController]; NSURL *url = [NSURL fileURLWithPath:[@"~/Desktop/File 2.binary" stringByExpandingTildeInPath]]; NSError *error; MainWindowDocument *thisDoc = [dc openDocumentWithContentsOfURL:url display:NO error:&error]; [self setDocument:thisDoc]; [self setManagedObjectContext:[thisDoc managedObjectContext]]; } Thanks!

    Read the article

  • File mkdirs() method not working in android/java

    - by Leif Andersen
    I've been pulling out my hair on this for a while now. The following method is supposed to download a file, and save it to the location specified on the hard drive. private static void saveImage(Context context, boolean backgroundUpdate, URL url, File file) { if (!Tools.checkNetworkState(context, backgroundUpdate)) return; // Get the image try { // Make the file file.getParentFile().mkdirs(); // Set up the connection URLConnection uCon = url.openConnection(); InputStream is = uCon.getInputStream(); BufferedInputStream bis = new BufferedInputStream(is); // Download the data ByteArrayBuffer baf = new ByteArrayBuffer(50); int current = 0; while ((current = bis.read()) != -1) { baf.append((byte) current); } // Write the bits to the file OutputStream os = new FileOutputStream(file); os.write(baf.toByteArray()); os.close(); } catch (Exception e) { // Any exception is probably a newtork faiilure, bail return; } } Also, if the file doesn't exist, it is supposed to make the directory for the file. (And if there is another file already in that spot, it should just not do anything). However, for some reason, the mkdirs() method never makes the directory. I've tried everything from explicit parentheses, to explicitly making the parent file class, and nothing seems to work. I'm fairly certain that the drive is writable, as it's only called after that has already been determined, also that is true after running through it while debugging. So the method fails because the parent directories aren't made. Can anyone tell me if there is anything wrong with the way I'm calling it? Also, if it helps, here is the source for the file I'm calling it in: https://github.com/LeifAndersen/NetCatch/blob/master/src/net/leifandersen/mobile/android/netcatch/services/RSSService.java Thank you

    Read the article

  • How do I delete folders in bash after successful copy (Mac OSX)?

    - by cohortq
    Hello! I recently created my first bash script, and I am having problems perfecting it's operation. I am trying to copy certain folders from one local drive, to a network drive. I am having the problem of deleting folders once they are copied over, well and also really verifying that they were copied over). Is there a better way to try to delete folders after rsync is done copying? I was trying to exclude the live tv buffer folder, but really, I can blow it away without consequence if need be. Any help would be great! thanks! #!/bin/bash network="CBS" useracct="tvcapture" thedate=$(date "+%m%d%Y") folderToBeMoved="/users/$useracct/Documents" newfoldername="/Volumes/Media/TV/$network/$thedate" ECHO "Network is $network" ECHO "date is $thedate" ECHO "source is $folderToBeMoved" ECHO "dest is $newfoldername" mkdir $newfoldername rsync -av $folderToBeMoved/"EyeTV Archive"/*.eyetv $newfoldername --exclude="Live TV Buffer.eyetv" # this fails when there is more than one *.eyetv folder if [ -d $newfoldername/*.eyetv ]; then #this deletes the contents of the directories find $folderToBeMoved/"EyeTV Archive"/*.eyetv \( ! -path $folderToBeMoved/"EyeTV Archive"/"Live TV Buffer.eyetv" \) -delete #remove empty directory find $folderToBeMoved/"EyeTV Archive"/*.eyetv -type d -exec rmdir {} \; fi

    Read the article

  • JAR files, don't they just bloat and slow Java down?

    - by Josamoto
    Okay, the question might seem dumb, but I'm asking it anyways. After struggling for hours to get a Spring + BlazeDS project up and running, I discovered that I was having problems with my project as a result of not including the right dependencies for Spring etc. There were .jars missing from my WEB-INF/lib folder, yes, silly me. After a while, I managed to get all the .jar files where they belong, and it comes at a whopping 12.5MB at that, and there's more than 30 of them! Which concerns me, but it probably and hopefully shouldn't be concerned. How does Java operate in terms of these JAR files, they do take up quite a bit of hard drive space, taking into account that it's compressed and compiled source code. So that can really quickly populate a lot of RAM and in an instant. My questions are: Does Java load an entire .jar file into memory when say for instance a class in that .jar is instantiated? What about stuff that's in the .jar that never gets used. Do .jars get cached somehow, for optimized application performance? When a single .jar is loaded, I understand that the thing sits in memory and is available across multiple HTTP requests (i.e. for the lifetime of the server instance running), unlike PHP where objects are created on the fly with each request, is this assumption correct? When using Spring, I'm thinking, I had to include all those fiddly .jars, wouldn't I just be better off just using native Java, with say at least and ORM solution like Hibernate? So far, Spring just took extra time configuring, extra hard drive space, extra memory, cpu consumption, so I'm concerned that the framework is going to cost too much application performance just to get for example, IoC implemented with my BlazeDS server. There still has to come ORM, a unit testing framework and bits and pieces here and there. It's just so easy to bloat up a project quickly and irresponsibly easily. Where do I draw the line?

    Read the article

  • Wordpress Admin Panel Code Input

    - by Wes
    I've got a wordpress admin panel for one of my themes and one of the boxes has an input for some code to drive google adsense. when I put the code into the box and call it with my php tags the code comes out like this: <script type="\&quot;text/javascript\&quot;"><!-- google_ad_client = \"pub-9295546347478163\"; /* Leaderboard 5/17/2010 */ google_ad_slot = \"7593465074\"; google_ad_width = 728; google_ad_height = 90; //--> </script> <script type="\&quot;text/javascript\&quot;" src="%5C%22http://pagead2.googlesyndication.com/pagead/show_ads.js%5C%22"> </script> Which I assume is a feature to stop SQL injections. How can I call pure code form a box? This is how I currently have that textbox setup. array( "name" => "Code for Top ad", "desc" => "Enter the HTML that will drive the banner ad for the page header", "id" => $shortname."_headerAd", "type" => "textarea"), and then echo it out with this: <?php echo get_option('lifestyle_headerAd'); ?>

    Read the article

  • Log4j Logging to the Wrong Directory

    - by John
    I have a relatively complex log4j.xml configuration file with many appenders. Some machines the application runs on need a separate log directory, which is actually a mapped network drive. To get around this, we embed a system property as part of the filename in order to specify the directory. Here is an example: The "${user.dir}" part is set as a system property on each system, and is normally set to the root directory of the application. On some systems, this location is not the root of the application. The problem is that there is always one appender where this is not set, and the file appears not to write to the mapped drive. The rest of the appenders do write to the correct location per the system property. As a unit test, I set up our QA lab to hard-code the values for the appender above, and it worked: however, a different appender will then append to the wrong file. The mis-logged file is always the same for a given configuration: it is not a random file each time. My best educated guess is that there is a HashMap somewhere containing these appenders, and for some reason, the first one retrieved from the map does not have the property set. Our application does have custom system properties loading: the main() method loads a properties file and calls into System.setProperties(). My first instinct was to check the static initialization order, and to ensure the controller class with the main method does not call into log4j (directly or indirectly) before setting the properties just in case this was interfering with log4j's own initialization. Even removing all vestiges of log4j from the initialization logic, this error condition still occurs.

    Read the article

  • Cisco ASA: How to route PPPoE-assigned subnet?

    - by Martijn Heemels
    We've just received a fiber uplink, and I'm trying to configure our Cisco ASA 5505 to properly use it. The provider requires us to connect via PPPoE, and I managed to configure the ASA as a PPPoE client and establish a connection. The ASA is assigned an IP address by PPPoE, and I can ping out from the ASA to the internet, but I should have access to an entire /28 subnet. I can't figure out how to get that subnet configured on the ASA, so that I can route or NAT the available public addresses to various internal hosts. My assigned range is: 188.xx.xx.176/28 The address I get via PPPoE is 188.xx.xx.177/32, which according to our provider is our Default Gateway address. They claim the subnet is correctly routed to us on their side. How does the ASA know which range it is responsible for on the Fiber interface? How do I use the addresses from my range? To clarify my config; The ASA is currently configured to default-route to our ADSL uplink on port Ethernet0/0 (interface vlan2, nicknamed Outside). The fiber is connected to port Ethernet0/2 (interface vlan50, nicknamed Fiber) so I can configure and test it before making it the default route. Once I'm clear on how to set it all up, I'll fully replace the Outside interface with Fiber. My config (rather long): : Saved : ASA Version 8.3(2)4 ! hostname gw domain-name example.com enable password ****** encrypted passwd ****** encrypted names name 10.10.1.0 Inside-dhcp-network description Desktops and clients that receive their IP via DHCP name 10.10.0.208 svn.example.com description Subversion server name 10.10.0.205 marvin.example.com description LAMP development server name 10.10.0.206 dns.example.com description DNS, DHCP, NTP ! interface Vlan2 description Old ADSL WAN connection nameif outside security-level 0 ip address 192.168.1.2 255.255.255.252 ! interface Vlan10 description LAN vlan 10 Regular LAN traffic nameif inside security-level 100 ip address 10.10.0.254 255.255.0.0 ! interface Vlan11 description LAN vlan 11 Lab/test traffic nameif lab security-level 90 ip address 10.11.0.254 255.255.0.0 ! interface Vlan20 description LAN vlan 20 ISCSI traffic nameif iscsi security-level 100 ip address 10.20.0.254 255.255.0.0 ! interface Vlan30 description LAN vlan 30 DMZ traffic nameif dmz security-level 50 ip address 10.30.0.254 255.255.0.0 ! interface Vlan40 description LAN vlan 40 Guests access to the internet nameif guests security-level 50 ip address 10.40.0.254 255.255.0.0 ! interface Vlan50 description New WAN Corporate Internet over fiber nameif fiber security-level 0 pppoe client vpdn group KPN ip address pppoe ! interface Ethernet0/0 switchport access vlan 2 speed 100 duplex full ! interface Ethernet0/1 switchport trunk allowed vlan 10,11,30,40 switchport trunk native vlan 10 switchport mode trunk ! interface Ethernet0/2 switchport access vlan 50 speed 100 duplex full ! interface Ethernet0/3 shutdown ! interface Ethernet0/4 shutdown ! interface Ethernet0/5 switchport access vlan 20 ! interface Ethernet0/6 shutdown ! interface Ethernet0/7 shutdown ! boot system disk0:/asa832-4-k8.bin ftp mode passive clock timezone CEST 1 clock summer-time CEDT recurring last Sun Mar 2:00 last Sun Oct 3:00 dns domain-lookup inside dns server-group DefaultDNS name-server dns.example.com domain-name example.com same-security-traffic permit inter-interface same-security-traffic permit intra-interface object network inside-net subnet 10.10.0.0 255.255.0.0 object network svn.example.com host 10.10.0.208 object network marvin.example.com host 10.10.0.205 object network lab-net subnet 10.11.0.0 255.255.0.0 object network dmz-net subnet 10.30.0.0 255.255.0.0 object network guests-net subnet 10.40.0.0 255.255.0.0 object network dhcp-subnet subnet 10.10.1.0 255.255.255.0 description DHCP assigned addresses on Vlan 10 object network Inside-vpnpool description Pool of assignable addresses for VPN clients object network vpn-subnet subnet 10.10.3.0 255.255.255.0 description Address pool assignable to VPN clients object network dns.example.com host 10.10.0.206 description DNS, DHCP, NTP object-group service iscsi tcp description iscsi storage traffic port-object eq 3260 access-list outside_access_in remark Allow access from outside to HTTP on svn. access-list outside_access_in extended permit tcp any object svn.example.com eq www access-list Insiders!_splitTunnelAcl standard permit 10.10.0.0 255.255.0.0 access-list iscsi_access_in remark Prevent disruption of iscsi traffic from outside the iscsi vlan. access-list iscsi_access_in extended deny tcp any interface iscsi object-group iscsi log warnings ! snmp-map DenyV1 deny version 1 ! pager lines 24 logging enable logging timestamp logging asdm-buffer-size 512 logging monitor warnings logging buffered warnings logging history critical logging asdm errors logging flash-bufferwrap logging flash-minimum-free 4000 logging flash-maximum-allocation 2000 mtu outside 1500 mtu inside 1500 mtu lab 1500 mtu iscsi 9000 mtu dmz 1500 mtu guests 1500 mtu fiber 1492 ip local pool DHCP_VPN 10.10.3.1-10.10.3.20 mask 255.255.0.0 ip verify reverse-path interface outside no failover icmp unreachable rate-limit 10 burst-size 5 asdm image disk0:/asdm-635.bin asdm history enable arp timeout 14400 nat (inside,outside) source static any any destination static vpn-subnet vpn-subnet ! object network inside-net nat (inside,outside) dynamic interface object network svn.example.com nat (inside,outside) static interface service tcp www www object network lab-net nat (lab,outside) dynamic interface object network dmz-net nat (dmz,outside) dynamic interface object network guests-net nat (guests,outside) dynamic interface access-group outside_access_in in interface outside access-group iscsi_access_in in interface iscsi route outside 0.0.0.0 0.0.0.0 192.168.1.1 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa-server SBS2003 protocol radius aaa-server SBS2003 (inside) host 10.10.0.204 timeout 5 key ***** aaa authentication enable console SBS2003 LOCAL aaa authentication ssh console SBS2003 LOCAL aaa authentication telnet console SBS2003 LOCAL http server enable http 10.10.0.0 255.255.0.0 inside snmp-server host inside 10.10.0.207 community ***** version 2c snmp-server location Server room snmp-server contact [email protected] snmp-server community ***** snmp-server enable traps snmp authentication linkup linkdown coldstart snmp-server enable traps syslog crypto ipsec transform-set TRANS_ESP_AES-256_SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set TRANS_ESP_AES-256_SHA mode transport crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac crypto ipsec transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac crypto ipsec transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group5 crypto dynamic-map outside_dyn_map 20 set transform-set TRANS_ESP_AES-256_SHA crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA ESP-3DES-MD5 ESP-DES-SHA ESP-DES-MD5 crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 1 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 telnet 10.10.0.0 255.255.0.0 inside telnet timeout 5 ssh scopy enable ssh 10.10.0.0 255.255.0.0 inside ssh timeout 5 ssh version 2 console timeout 30 management-access inside vpdn group KPN request dialout pppoe vpdn group KPN localname INSIDERS vpdn group KPN ppp authentication pap vpdn username INSIDERS password ***** store-local dhcpd address 10.40.1.0-10.40.1.100 guests dhcpd dns 8.8.8.8 8.8.4.4 interface guests dhcpd update dns interface guests dhcpd enable guests ! threat-detection basic-threat threat-detection scanning-threat threat-detection statistics host number-of-rate 2 threat-detection statistics port number-of-rate 3 threat-detection statistics protocol number-of-rate 3 threat-detection statistics access-list threat-detection statistics tcp-intercept rate-interval 30 burst-rate 400 average-rate 200 ntp server dns.example.com source inside prefer webvpn group-policy DfltGrpPolicy attributes vpn-tunnel-protocol IPSec l2tp-ipsec group-policy Insiders! internal group-policy Insiders! attributes wins-server value 10.10.0.205 dns-server value 10.10.0.206 vpn-tunnel-protocol IPSec l2tp-ipsec split-tunnel-policy tunnelspecified split-tunnel-network-list value Insiders!_splitTunnelAcl default-domain value example.com username martijn password ****** encrypted privilege 15 username marcel password ****** encrypted privilege 15 tunnel-group DefaultRAGroup ipsec-attributes pre-shared-key ***** tunnel-group Insiders! type remote-access tunnel-group Insiders! general-attributes address-pool DHCP_VPN authentication-server-group SBS2003 LOCAL default-group-policy Insiders! tunnel-group Insiders! ipsec-attributes pre-shared-key ***** ! class-map global-class match default-inspection-traffic class-map type inspect http match-all asdm_medium_security_methods match not request method head match not request method post match not request method get ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map type inspect http http_inspection_policy parameters protocol-violation action drop-connection policy-map global-policy class global-class inspect dns inspect esmtp inspect ftp inspect h323 h225 inspect h323 ras inspect http inspect icmp inspect icmp error inspect mgcp inspect netbios inspect pptp inspect rtsp inspect snmp DenyV1 ! service-policy global-policy global smtp-server 123.123.123.123 prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily hpm topN enable Cryptochecksum:a76bbcf8b19019771c6d3eeecb95c1ca : end asdm image disk0:/asdm-635.bin asdm location svn.example.com 255.255.255.255 inside asdm location marvin.example.com 255.255.255.255 inside asdm location dns.example.com 255.255.255.255 inside asdm history enable

    Read the article

  • When I shutdown the computer, it restarts

    - by Prabu
    I am unable to shutdown. Whenever I try to shutdown, it reboots. I am running Ubuntu 12.10. I have run the boot-repair and this is the result: Boot Info Script 0.61.full + Boot-Repair extra info [Boot-Info November 20th 2012] ============================= Boot Info Summary: =============================== => Grub2 (v2.00) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks in partition 1 for (,msdos1)/boot/grub. sda1: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 12.10 Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/i386-pc/core.img sda2: __________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 2,048 1,936,809,983 1,936,807,936 83 Linux /dev/sda2 1,936,812,030 1,953,523,711 16,711,682 5 Extended /dev/sda5 1,936,812,032 1,953,523,711 16,711,680 82 Linux swap / Solaris "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 229a5484-7659-4ce1-98ce-2f05f61a1ffa ext4 /dev/sda5 6c6dca25-ab67-4de4-8602-26fdb6154781 swap /dev/sr0 iso9660 Ubuntu 12.10 amd64 ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) =========================== sda1/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ x"${feature_menuentry_id}" = xy ]; then menuentry_id_option="--id" else menuentry_id_option="" fi export menuentry_id_option if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { if [ x$feature_all_video_module = xy ]; then insmod all_video else insmod efi_gop insmod efi_uga insmod ieee1275_fb insmod vbe insmod vga insmod video_bochs insmod video_cirrus fi } if [ x$feature_default_font_path = xy ] ; then font=unicode else insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi font="/usr/share/grub/unicode.pf2" fi if loadfont $font ; then set gfxmode=auto load_video insmod gfxterm set locale_dir=$prefix/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=10 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="${1}" if [ "${1}" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ "${recordfail}" != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "${linux_gfx_mode}" != "text" ]; then load_video; fi menuentry 'Ubuntu' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff initrd /boot/initrd.img-3.5.0-19-generic } submenu 'Advanced options for Ubuntu' $menuentry_id_option 'gnulinux-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { menuentry 'Ubuntu, with Linux 3.5.0-19-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-19-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-19-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-19-generic ...' linux /boot/vmlinuz-3.5.0-19-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-19-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-advanced-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro quiet splash acpi=force $vt_handoff echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } menuentry 'Ubuntu, with Linux 3.5.0-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-3.5.0-17-generic-recovery-229a5484-7659-4ce1-98ce-2f05f61a1ffa' { recordfail insmod gzio insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi echo 'Loading Linux 3.5.0-17-generic ...' linux /boot/vmlinuz-3.5.0-17-generic root=UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.5.0-17-generic } } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='hd0,msdos1' if [ x$feature_platform_search_hint = xy ]; then search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 229a5484-7659-4ce1-98ce-2f05f61a1ffa else search --no-floppy --fs-uuid --set=root 229a5484-7659-4ce1-98ce-2f05f61a1ffa fi linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/30_uefi-firmware ### ### END /etc/grub.d/30_uefi-firmware ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f ${config_directory}/custom.cfg ]; then source ${config_directory}/custom.cfg elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda1/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> # / was on /dev/sda1 during installation UUID=229a5484-7659-4ce1-98ce-2f05f61a1ffa / ext4 errors=remount-ro 0 1 # swap was on /dev/sda5 during installation UUID=6c6dca25-ab67-4de4-8602-26fdb6154781 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda1: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 200.155235291 = 214.915047424 boot/grub/grub.cfg 1 40.280788422 = 43.251167232 boot/initrd.img-3.5.0-17-generic 1 2.468288422 = 2.650304512 boot/initrd.img-3.5.0-19-generic 1 200.149234772 = 214.908604416 boot/vmlinuz-3.5.0-17-generic 1 1.990135193 = 2.136891392 boot/vmlinuz-3.5.0-19-generic 1 2.468288422 = 2.650304512 initrd.img 1 1.990135193 = 2.136891392 vmlinuz 1 1.990135193 = 2.136891392 vmlinuz.old 1 =============================== StdErr Messages: =============================== cat: write error: Broken pipe File descriptor 8 (/proc/6297/mounts) leaked on lvscan invocation. Parent PID 13390: bash No volume groups found ADDITIONAL INFORMATION : =================== log of boot-repair 2012-12-17__01h53 =================== boot-repair version : 3.197~ppa1~quantal boot-sav version : 3.197~ppa1~quantal glade2script version : 3.2.2~ppa45~quantal boot-sav-extra version : 3.197~ppa1~quantal boot-repair is executed in live-session (Ubuntu 12.10, quantal, Ubuntu, x86_64) CPU op-mode(s): 32-bit, 64-bit file=/cdrom/preseed/ubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- maybe-ubiquity =================== os-prober: /dev/sda1:Ubuntu 12.10 (12.10):Ubuntu:linux =================== blkid: /dev/loop0: TYPE="squashfs" /dev/sr0: LABEL="Ubuntu 12.10 amd64" TYPE="iso9660" /dev/sda1: UUID="229a5484-7659-4ce1-98ce-2f05f61a1ffa" TYPE="ext4" /dev/sda5: UUID="6c6dca25-ab67-4de4-8602-26fdb6154781" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. Warning: extended partition does not start at a cylinder boundary. DOS and Linux will interpret the contents differently. =================== sda1/etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash acpi=force" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" =================== sda1/etc/grub.d/ : drwxr-xr-x 2 root root 4096 Oct 17 14:59 grub.d total 72 -rwxr-xr-x 1 root root 7541 Oct 14 17:36 00_header -rwxr-xr-x 1 root root 5488 Oct 4 09:30 05_debian_theme -rwxr-xr-x 1 root root 10891 Oct 14 17:36 10_linux -rwxr-xr-x 1 root root 10258 Oct 14 17:36 20_linux_xen -rwxr-xr-x 1 root root 1688 Oct 11 14:10 20_memtest86+ -rwxr-xr-x 1 root root 10976 Oct 14 17:36 30_os-prober -rwxr-xr-x 1 root root 1426 Oct 14 17:36 30_uefi-firmware -rwxr-xr-x 1 root root 214 Oct 14 17:36 40_custom -rwxr-xr-x 1 root root 216 Oct 14 17:36 41_custom -rw-r--r-- 1 root root 483 Oct 14 17:36 README =================== UEFI/Legacy mode: This live-session is not in EFI-mode. SecureBoot maybe enabled. =================== PARTITIONS & DISKS: sda1 : sda, not-sepboot, grubenv-ok grub2, grub-pc , update-grub, 64, with-boot, is-os, not--efi--part, fstab-without-boot, fstab-without-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, notwinboot, apt-get, grub-install, with--usr, fstab-without-usr, not-sep-usr, standard, farbios, /mnt/boot-sav/sda1. sda : not-GPT, BIOSboot-not-needed, has-no-EFIpart, not-usb, has-os, 2048 sectors * 512 bytes =================== parted -l: Model: ATA ST1000DM003-1CH1 (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 992GB 992GB primary ext4 boot 2 992GB 1000GB 8556MB extended 5 992GB 1000GB 8556MB logical linux-swap(v1) Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== parted -lm: BYT; /dev/sda:1000GB:scsi:512:4096:msdos:ATA ST1000DM003-1CH1; 1:1049kB:992GB:992GB:ext4::boot; 2:992GB:1000GB:8556MB:::; 5:992GB:1000GB:8556MB:linux-swap(v1)::; Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! =================== mount: /cow on / type overlayfs (rw) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) /dev/sr0 on /cdrom type iso9660 (ro,noatime) /dev/loop0 on /rofs type squashfs (ro,noatime) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) tmpfs on /tmp type tmpfs (rw,nosuid,nodev) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) none on /run/user type tmpfs (rw,noexec,nosuid,nodev,size=104857600,mode=0755) gvfsd-fuse on /run/user/ubuntu/gvfs type fuse.gvfsd-fuse (rw,nosuid,nodev,user=ubuntu) /dev/sda1 on /mnt/boot-sav/sda1 type ext4 (rw) =================== ls: /sys/block/sda (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda5 size slaves stat subsystem trace uevent /sys/block/sr0 (filtered): alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro size slaves stat subsystem trace uevent /dev (filtered): alarm ashmem autofs binder block bsg btrfs-control bus cdrom cdrw char console core cpu cpu_dma_latency disk dri dvd dvdrw ecryptfs fb0 fd full fuse fw0 hidraw0 hidraw1 hpet input kmsg kvm log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda5 sg0 sg1 shm snapshot snd sr0 stderr stdin stdout uinput urandom usb vga_arbiter vhost-net zero ls /dev/mapper: control =================== df -Th: Filesystem Type Size Used Avail Use% Mounted on /cow overlayfs 3.9G 100M 3.8G 3% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run /dev/sr0 iso9660 763M 763M 0 100% /cdrom /dev/loop0 squashfs 717M 717M 0 100% /rofs tmpfs tmpfs 3.9G 32K 3.9G 1% /tmp none tmpfs 5.0M 4.0K 5.0M 1% /run/lock none tmpfs 3.9G 176K 3.9G 1% /run/shm none tmpfs 100M 52K 100M 1% /run/user /dev/sda1 ext4 910G 26G 838G 3% /mnt/boot-sav/sda1 =================== fdisk -l: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000da1e9 Device Boot Start End Blocks Id System /dev/sda1 * 2048 1936809983 968403968 83 Linux /dev/sda2 1936812030 1953523711 8355841 5 Extended Partition 2 does not start on physical sector boundary. /dev/sda5 1936812032 1953523711 8355840 82 Linux swap / Solaris Partition outside the disk detected. =================== Recommended repair Recommended-Repair This setting will reinstall the grub2 of sda1 into the MBR of sda. Additional repair will be performed: unhide-bootmenu-10s Unhide GRUB boot menu in sda1/etc/default/grub grub-install (GRUB) 2.00-7ubuntu11,grub-install (GRUB) 2. Reinstall the GRUB of sda1 into the MBR of sda Installation finished. No error reported. grub-install /dev/sda: exit code of grub-install /dev/sda:0 chroot /mnt/boot-sav/sda1 update-grub Generating grub.cfg ... Found linux image: /boot/vmlinuz-3.5.0-19-generic Found initrd image: /boot/initrd.img-3.5.0-19-generic Found linux image: /boot/vmlinuz-3.5.0-17-generic Found initrd image: /boot/initrd.img-3.5.0-17-generic Found memtest86+ image: /boot/memtest86+.bin Unhide GRUB boot menu in sda1/boot/grub/grub.cfg Boot successfully repaired. You can now reboot your computer.

    Read the article

  • Facebook Game Development - Which Programming languages?

    - by Ben
    Hi folks, I am going to develop a facebook game as topic for my thesis. I am wondering which programming languages i should choice. I am used to programming in .NET. But i am also comfortable in C++ and Java. I don't want to use Flash as the graphical frontend since i don't like it. So i guess i'll go with ASP.NET + Silverlight. What do you think?

    Read the article

  • Uploadify (Session and authentication) with ASP.NET MVC

    - by Dragouf
    When I use Authorize filter on an action or a controller used by uplodify (http://www.uploadify.com/) the action isn't reach... moreover Session are not retrieved. I found this to retrieved user session : http://geekswithblogs.net/apopovsky/archive/2009/05/06/working-around-flash-cookie-bug-in-asp.net-mvc.aspx But how to use it with [Authorize] filter and retrieved session ?

    Read the article

  • Using Wicked with Devise for a sign up wizard

    - by demondeac11
    I am using devise with wicked to create a sign up wizard, but I am unsure about a problem I am having creating profiles. After a user provides their email & password they are forwarded to a step to create a profile based on whether they have specified they are a shipper or carrier. However I am unsure what the code should be in the controller and the forms to generically create a profile. Here is the code I have for the application: The steps controller: class UserStepsController < ApplicationController include Wicked::Wizard steps :carrier_profile, :shipper_profile def create @user = User.last case step when :carrier_profile @profile = CarrierProfile.create!(:dot => params[:dot]) if @profile.save render_wizard @user else flash[:alert] = "Record not saved" end when :shipper_profile @profile = ShipperProfile.create!(params[:shipper_profile) if @profile.save render_wizard @user else flash[:alert] = "Record not saved" end end end end end def show @user = User.last @carrier_profile = CarrierProfile.new @shipper_profile = ShipperProfile.new case step when :carrier_profile skip_step if @user.shipper? when :shipper_profile skip_step if @user.carrier? end render_wizard end end The form for a carrier profile: <% form_for @carrier_profile , url: wizard_path, method: :post do |f| %> <div> <%= f.label :dot, "Please enter your DOT Number:" %> <%= f.text_field :dot %> </div> <%= f.submit "Next Step", class: "btn btn-primary" %> <% end %> The form for a shipper profile: <% form_for @shipper_profile , url: wizard_path, method: :post do |f| %> <div> <%= f.label :company_name, "What is your company name?" %> <%= f.text_field :company_name %> </div> <%= f.submit "Next Step", class: "btn btn-primary" %> <% end %> The user model: class User < ActiveRecord::Base has_one :carrier_profile has_one :shipper_profile end How would I be able to write a generic new and create method to handle creating both profiles? With the current code it is stating that the user_steps controller has no POST method, although if I run rake routes I find that this is untrue.

    Read the article

  • Seeking a simultaneous fade and blur effect using JQuery or Javascript

    - by Heath Waller
    Can anyone think of a way to simulate the fade/blur flash effect used in the following website: http://www.frenchlaundry.com/ (image fades and blurs on hover, while text fades in simultaneously) using JQuery? I am looking to have this whole chain of effects happen on load or when the DOM is ready (instead of on hover). And by blur, I mean a gaussian-type of blur - possibly using Pixastic (?) I am really new at this, so please be gentle :) Thank you.

    Read the article

  • Algorithm for heat map?

    - by eshan
    I have a list of values each with latitude and longitude. I'm looking to create a translucent heatmap image to overlay on Google Maps. I know there are server side and flash based solutions already, but I want to build this in javascript using the canvas tag. However, I can't seem to find a concise description of the algorithm used to turn coordinates and values into a heatmap. Can anyone provide or link to one? Thanks.

    Read the article

  • jQuery plugin for html5 video instream ads?

    - by dar
    Are there any jQuery plugins for html5 video to insert instream ads into the video? Most of the flash ones work by pausing the video at a particular timestamp, and playing an ad stream, then resuming the original video stream. The jquery captions plugin for html5 seems very similar, but different.

    Read the article

  • How to resize YouTube player when Window Resize

    - by Permana
    I want to show Popup window contain YouTube video. My question is how to resize YouTube Player when user resize the Popup Window ? Head section of Popup windows PHP/HTML code <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" /> <title>Wavin Video</title> <script src="jquery-1.4.1.min.js" type="text/javascript"></script> <script type="text/javascript" charset="utf-8"> $(document).ready(function(){ //If the User resizes the window //$(window).bind("resize", resizeWindow); $(window).resize(resizeWindow).resize() function resizeWindow( e ) { var target = "#youtubebox2"; var newWindowHeight = $(window).height(); var newWindowWidth = $(window).width(); console.log("Width : "+newWindowWidth); console.log("Height: "+newWindowHeight); console.log("---------"); $(target).html("<object width=\""+newWindowWidth+"\" height=\""+newWindowHeight+"\" id=\"youtubebox\"><param name=\"movie\" value=\"http://www.youtube.com/v/<?php echo $_GET['filename'];?>\"></param><param name=\"allowFullScreen\" value=\"true\"></param><param name=\"allowscriptaccess\" value=\"always\"></param><embed src=\"http://www.youtube.com/v/<?php echo $_GET['filename'];?>\" type=\"application/x-shockwave-flash\" allowscriptaccess=\"always\" allowfullscreen=\"true\" width=\""+newWindowWidth+"\" height=\""+newWindowHeight+"\"></embed></object>"); } }); </script> </head> <body> <div align="center" style="padding:6px 0px 0px 0px;background-color: #ccc;" id="youtubebox2"> <object width="480" height="385" id="youtubebox"> <param name="movie" value="http://www.youtube.com/v/<?php echo $_GET['filename'];?>"></param> <param name="allowFullScreen" value="true"></param> <param name="allowscriptaccess" value="always"></param> <embed src="http://www.youtube.com/v/<?php echo $_GET['filename'];?>" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"> </embed> </object> </div> </body> </html> the page receive youtube video ID through $_GET variable. the code above didn't work, the YouTUbe Player is not resized. Is there something I miss ?

    Read the article

< Previous Page | 412 413 414 415 416 417 418 419 420 421 422 423  | Next Page >