Search Results

Search found 10939 results on 438 pages for 'third monitor'.

Page 417/438 | < Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >

  • Help to solve "Robbery Problem"

    - by peiska
    Hello, Can anybody help me with this problem in C or Java? The problem is taken from here: http://acm.pku.edu.cn/JudgeOnline/problem?id=1104 Inspector Robstop is very angry. Last night, a bank has been robbed and the robber has not been caught. And this happened already for the third time this year, even though he did everything in his power to stop the robber: as quickly as possible, all roads leading out of the city were blocked, making it impossible for the robber to escape. Then, the inspector asked all the people in the city to watch out for the robber, but the only messages he got were of the form "We don't see him." But this time, he has had enough! Inspector Robstop decides to analyze how the robber could have escaped. To do that, he asks you to write a program which takes all the information the inspector could get about the robber in order to find out where the robber has been at which time. Coincidentally, the city in which the bank was robbed has a rectangular shape. The roads leaving the city are blocked for a certain period of time t, and during that time, several observations of the form "The robber isn't in the rectangle Ri at time ti" are reported. Assuming that the robber can move at most one unit per time step, your program must try to find the exact position of the robber at each time step. Input The input contains the description of several robberies. The first line of each description consists of three numbers W, H, t (1 <= W,H,t <= 100) where W is the width, H the height of the city and t is the time during which the city is locked. The next contains a single integer n (0 <= n <= 100), the number of messages the inspector received. The next n lines (one for each of the messages) consist of five integers ti, Li, Ti, Ri, Bi each. The integer ti is the time at which the observation has been made (1 <= ti <= t), and Li, Ti, Ri, Bi are the left, top, right and bottom respectively of the (rectangular) area which has been observed. (1 <= Li <= Ri <= W, 1 <= Ti <= Bi <= H; the point (1, 1) is the upper left hand corner, and (W, H) is the lower right hand corner of the city.) The messages mean that the robber was not in the given rectangle at time ti. The input is terminated by a test case starting with W = H = t = 0. This case should not be processed. Output For each robbery, first output the line "Robbery #k:", where k is the number of the robbery. Then, there are three possibilities: If it is impossible that the robber is still in the city considering the messages, output the line "The robber has escaped." In all other cases, assume that the robber really is in the city. Output one line of the form "Time step : The robber has been at x,y." for each time step, in which the exact location can be deduced. (x and y are the column resp. row of the robber in time step .) Output these lines ordered by time . If nothing can be deduced, output the line "Nothing known." and hope that the inspector will not get even more angry. Output a blank line after each processed case.

    Read the article

  • Null date reference when passing json to MVC Controller

    - by Jake
    I am building an event system that posts data to a google calendar. I am using jquery 1.4.2, fullcalendar 1.4.5, and asp.net MVC 2. I am using a jquery ui modal dialog for the entry system. Jquery ui datepicker for the from and to fields. Select boxes for the time fields. I have tried both string and DateTime formats in the GCalEvent Class for startDate, startTime, endDate and endTime. I am receiving a null reference with the dates passed to the controllers Action method. var gcalevent = { 'eventID': $('#eventID').val(), 'eventURL': $('#eventURL').val(), 'date': { 'startDate': $("#from").val(), 'startTime': $('#eventStartHour option:selected').val() + ":" + $('#eventStartMin option:selected').val() + $('#eventStartAMPM option:selected').val(), 'endDate': $('#to').val(), 'endTime': $('#eventEndHour option:selected').val() + ":" + $('#eventEndMin option:selected').val() + $('#eventEndAMPM option:selected').val() }, 'allDay': $('#chkAllDay').attr('checked'), 'where': $('#eventWhere').val(), 'eventTitle': $('#eventTitle').val(), 'eventDescription': $('#eventDescription').val() }; $.post("/home/AddRepeatingEvent", gcalevent, addEventCallback); public void AddNonRepeatingEvent(Models.GCalEvent gcalevent) { IGCalRepository _gcalrepo; GCalRepository gcalrepo = new GCalRepository(); _gcalrepo = gcalrepo; //_gcalrepo.AddEvent(gcalevent); GetGoogleEventURL(gcalevent.eventID.ToString()); } public enum Days { Sun, Mon, Tue, Wed, Thur, Fri, Sat } public enum DefaultCalendarView { Month, Day, Week } public enum OrderType { First, Second, Third, Fourth, Last } public abstract class RepeatBaseType { } public class GCalEvent { public string title { get; set; } public string description { get; set; } public string where { get; set; } public bool repeated { get; set; } public bool allDay { get; set; } public DefaultCalendarView defaultCalendarView { get; set; } public GCalEventDate date { get; set; } public RepeatBaseType repeatType { get; set; } public string eventID { get; set; } public string eventURL { get; set; } } public class GCalEventDate { public string startDate { get; set; } public string startTime { get; set; } public string endDate {get;set;} public string endTime {get;set;} } internal class Duration { int Days { get; set; } int Hours { get; set; } int Minutes { get; set; } } public class RepeatedDaily: RepeatBaseType { public int Days { get; set; } } public class RepeatedWeekly : RepeatBaseType { public int Weeks { get; set; } public Days[] days { get; set; } } public class RepeatedMonthly : RepeatBaseType { public int Months { get; set; } public RepeatedMonthlyType repeatedMonthlyType { get; set; } } public class RepeatedYearly : RepeatBaseType { public int Years {get;set;} } public abstract class RepeatedMonthlyType { } public class RepeatedMonthlyDayOfWeek : RepeatedMonthlyType { public Days[] DayOfWeek { get; set; } public OrderType orderType { get; set; } } public class RepeatedMonthlyDayOfMonth : RepeatedMonthlyType { public DateTime DayOfMonth { get; set; } } This is the first time i am attempting to use abastract classes. Thank you for your help.

    Read the article

  • Should we develop a custom membership provider in this case?

    - by Allen
    I'll be adding a bounty to this, probably 200, more if you guys think its appropriate. I wont accept an answer until I can add a bounty so feel free to go ahead and answer now Summary Long story short, we've been tasked with gutting the authentication and authorization parts of a fairly old and bloated asp.net application that previously had all of these components written from scratch. Since our application isn't a typical one, and none of us have experience in asp.net's built in membership provider stuff, we're not sure if we should roll our own authentication and authorization again or if we should try to work within the asp.net membership provider mindset and develop our own membership provider. Our Application We have a fairly old asp.net application that gets installed at customer locations to service clients on a LAN. Admins create users (users do not sign up) and depending on the install, we may have the software integrated with LDAP. Currently, the LDAP integration bulk-imports the users to our database and when they login, it authenticates against LDAP so we dont have to manage their passwords. Nothing amazing there. Admins can assign users to 1 group and they can change the authorization of that group to manage access to various parts of the software. Groups are maintained by Admins (web based UI) and as said earlier, granted / denied permissions to certain functionality within the application. All this was completely written from the ground up without using any of the built in .net authorization or authentication. We literally have IsLoggedIn() methods that check for login and redirect to our login page if they aren't. Our Rewrite We've been tasked to integrate more tightly with LDAP, they want us to tie groups in our application to groups (or whatever types of containers that LDAP uses) in LDAP so that when a customer opt's to use our LDAP integration, they dont have to manage their users in LDAP AND in our application. The new way, they will simply create users in LDAP, add them to Groups in LDAP and our application will see that they belong to the appropriate LDAP group and authenticate and authorize them. In addition, we've been granted the go ahead to completely rip out the User authentication and authorization code and completely re-do it. Our Problem The problem is that none of us have any experience with asp.net membership provider functionality. The little bit of exposure I have to it makes me worry that it was not intended to be used for an application such as ours. Though, developing our own ASP.NET Membership Provider and Role Manager sounds like it would be a great experience and most likely the appropriate thing to do. Basically, I'm looking for advice, should we be using the ASP.NET Membership provider & Role Management API or should we continue to roll our own? I know this decision will be influenced by our requirements so I'm going over them below Our Requirements Just a quick n dirty list Maintain the ability to have a db of users and authenticate them and give admins (only, not users) the ability to CRUD users Allow the site to integrate with LDAP, when this is chosen, they don't want any users stored in the DB, only the relationship between Groups as they exist in our app / db and the Groups/Containers as they exist in LDAP. .net 3.5 is being used (mix of asp.net webforms and asp.net mvc) Has to work in ASP.NET and ASP.NET MVC (shouldn't be a problem I'm guessing) This can't be user centric, administrators need to be the only ones that CRUD (or import via ldap) users and groups We have to be able to Auth via LDAP when its configured to do so I always try to monitor my questions closely so feel free to ask for more info. Also, as a general summary of what I'm looking for in an answer is just. "You should/shouldn't use xyz, here's why". Links regarding asp.net membership provider and role management stuff are very welcome, most of the stuff I'm finding is 5+ years old. Edit: Added some stuff to "Our Rewrite"

    Read the article

  • Uncaught TypeError: Object #<an Object> has no method 'fullCalendar'

    - by Lalit
    Hi, I have embed the fullcalender control in my asp.net mvc application. It is running fine locally. but when I uploads it to my domain server (third party) it showing me This Error: Uncaught TypeError: Object # has no method 'fullCalendar' in crome console (debugger). and not rendering the control. ** EDITED: My HTML code is this ** <%@ Page Title="" Language="C#" MasterPageFile="~/Views/Shared/Site.Master" Inherits="System.Web.Mvc.ViewPage" % Index <% var serializer = new System.Web.Script.Serialization.JavaScriptSerializer(); % < style type='text/css' body { margin-top: 40px; text-align: center; font-size: 14px; font-family: "Lucida Grande",Helvetica,Arial,Verdana,sans-serif; } #calendar { width: 900px; margin: 0 auto; } < script type="text/javascript" $(document).ready(function() { var date = new Date(); var d = date.getDate(); var m = date.getMonth(); var y = date.getFullYear(); var officerid = document.getElementById('officerid').value; url = "/TasksToOfficer/Calender/" + officerid; var currenteventIden = <%= serializer.Serialize( ViewData["iden"] ) %> var calendar = $('#calendar').fullCalendar({ header: { left: 'prev,next today', center: 'title', right: 'month,agendaWeek,agendaDay', border: 0 }, eventClick: function(event, element) { var title = prompt('Event Title:', event.title, { buttons: { Ok: true, Cancel: false} }); var iden = event.id; if (title) { var st = event.start; var ed = event.end; var aldy = event.allDay; var dt = event.date; event.title = title; calendar.fullCalendar('updateEvent',event); var date = new Date(st); var NextMonth = date.getMonth() + 1; var dateString = (date.getDate()) + '/' + NextMonth + '/' + date.getFullYear(); var QueryStringForEdit=null; QueryStringForEdit="officerid=" + officerid + "&description=" + title + "&date=" + dateString + "&IsForUpdate=true&iden=" + iden; if (officerid) { $.ajax( { type: "POST", url: "/TasksToOfficer/Create", data: QueryStringForEdit, success: function(result) { if (result.success) $("#feedback input").attr("value", ""); // clear all the input fields on success }, error: function(req, status, error) { } }); } } }, selectable: true, selectHelper: true, select: function(start, end, allDay) { var title = prompt('Event Title:', { buttons: { Ok: true, Cancel: false } } ); if (title) { calendar.fullCalendar('renderEvent', { title: title, start: start, end: end, allDay: allDay }, false); // This is false , because do not show same event on same date after render from server side. var date = new Date(start); var NextMonth = date.getMonth() + 1; // Reason: it is bacause of month array it starts from 0 var dateString = (date.getDate()) + '/' + NextMonth + '/' + date.getFullYear(); if (officerid) { $.ajax({ type: "POST", url: "/TasksToOfficer/Create", data: "officerid=" + officerid + "&description=" + title + "&date=" + dateString + "&IsForUpdate=false", success: function(result) { if (result.success) $("#feedback input").attr("value", ""); //$("#feedback_status").slideDown(250).text(result.message); }, error: function(req, status, error) { } }); } } calendar.fullCalendar('unselect'); }, editable: true, events: url }); }); //--------------------------------------------------------------------------// </script > <h2> Index</h2> <div id="calendar"> </div> <input id="officerid" type="hidden" value="<%=ViewData["officerid"].ToString()%>" />

    Read the article

  • Three ways to upload/post/convert iMovie to YouTube [closed]

    - by alexyu2010
    For Mac users, iMovie is probably a convenient tool for making, editing their own home movies so as to upload to YouTube for sharing with more people. However, uploading iMovie files to YouTube can't be always a smooth run, I did notice many people complaining about it. This article is delivered for guiding those who are haunted by the nightmare by providing three common ways to upload iMovie files to YouTube. YouTube and iMovie YouTube is the most popular video sharing website for users to upload, share and view videos. It empowers anyone with an Internet connection the ability to upload video clips and share them with friends, family and the world. Users are invited to leave comments, pick favourites, send messages to each other and watch videos sorted into subjects and channels. YouTube accepts videos uploaded in most container formats, including WMV (Windows Media Video), 3GP (Cell Phones), AVI (Windows), MOV (Mac), MP4 (iPod/PSP), FLV (Adobe Flash), MKV (H.264). These include video codecs such as MP4, MPEG and WMV. iMovie is a common video editing software application comes with every Mac for users to edit their own home movies. It imports video footage to the Mac using either the Firewire interface on most MiniDV format digital video cameras, the USB port, or by importing the files from a hard drive where users can edit the video clips, add titles, and add music. Since 1999, eight versions of iMovie have been released by Apple, each with its own functions and characteristic, and each of them deal with videos in a way more or less different. But the most common formats handled with iMovie if specialty discarded as far as to my research are MOV, DV, HDV, MPEG-4. Three ways for successful upload iMovie files to YouTube Solution one and solution two suitable for those who are 100 certainty with their iMovie files which are fully compatible with YouTube. For smooth uploading, you are required to get a YouTube account first. Solution 1: Directly upload iMovie to YouTube Step 1: Launch iMovie, select the project you want to upload in YouTube. Step 2: Go to the file menu, click Share, select Export Movie Step 3: Specify the output file name and directory and then type the video type and video size. Solution 2: Post iMovie to YouTube straightly Step 1: Launch iMovie, choose the project you want to post in YouTube Step 2: From the Share menu, choose YouTube Step 3: In the pop-up YouTube windows, specify the name of your YouTube account, the password, choose the Category and fill in the description and tags of the project. Tick Make this movie more private on the bottom of the window, if possible, to limit those who can view the project. Click Next, and then click Publish. iMovie will automatically export and upload the movie to YouTube. Step 4: Click Tell a Friend to email friends and your family about your film. You are also allowed to copy the URL from Tell a Friend window and paste it into an email you created in your favourite email application if you like. Anyone you send to email to will be able to follow the URL directly to your movie. Note: Videos uploaded to YouTube are limited to ten minutes in length and a file size of 2GB. Solution 3: Upload to iMovie after conversion If neither of the above mentioned method works, there is still a third way to turn to. Sometimes, your iMovie files may not be recognized by YouTube due to the versions of iMovie (settings and functions may varies among versions), video itself (video format difference because of file extension, resolution, video size and length), compatibility (videos that are completely incompatible with YouTube). In this circumstance, the best and reliable method is to convert your iMovie files to YouTube accepted files, iMovie to YouTube converter will be inevitably the ideal choice. iMovie to YouTube converter is an elaborately designed tool for convert iMovie files to YouTube workable WMV, 3GP, AVI, MOV, MP4, FLV, MKV for smooth uploading with hard-to-believe conversion speed and second to none output quality. It can also convert between almost all popular popular file formats like AVI, WMV, MPG, MOV, VOB, DV, MP4, FLV, 3GP, RM, ASF, SWF, MP3, AAC, AC3, AIFF, AMR, WAV, WMA etc so as to put on various portable devices, import to video editing software or play on vast amount video players. iMovie to YouTube converter can also served as an excellent video editing tool to meet your specific program requirements. For example, you can cut your video files to a certain length, or split your video files to smaller ones and select the proper resolution suitable for demands of YouTube by Clip or Settings separately. Crop allows you to cut off unwanted black edges from your videos. Besides, you can also have a good command of the whole process or snapshot your favourite pictures from the preview window. More can be expected if you have a try.

    Read the article

  • JQuery - Adding Cells to Dynamic Tree Table

    - by BPotocki
    I can't quite wrap my head around this one... A table like the one below is spit out by a renderer from some XML. The XML it comes from has a variable depth. (Please point out if I'm using the rowspans in a horrific manner as well, I just came to this table with some experimentation). <table border="1"> <tr> <td rowspan="12">> 1</td> </tr> <tr> <td rowspan="3">1 > 2</td> </tr> <tr> <td>1 > 2 > 5</td> </tr> <tr> <td>1 > 2 > 6</td> </tr> <tr> <td rowspan="3">1 > 3</td> </tr> <tr> <td>1 > 3 > 7</td> </tr> <tr> <td>1 > 3 > 8</td> </tr> <tr> <td rowspan="3">1 > 4</td> </tr> <tr> <td>1 > 4 > 9</td> </tr> <tr> <td>1 > 4 > 10</td> </tr> </table> What I'm trying to accomplish in JQuery is this... User clicks cell "1 2" (which will have an ID). An item is dynamically added to the third level, but UNDER "1 2 6". What I could do is just add another row underneath "1 2" and increase the rowspan from "1 2", but the new cell would then appear out of order amongst "1 2 5" and "1 2 6". I don't really need the exact code to do this, just something to stop my head from spinning around this...Thanks!

    Read the article

  • nginx+php-fpm help optimize configs

    - by Dmitro
    I have 3 servers. First server (CPU - model name: 06/17, 2.66GHz, 4 cores, 8GB RAM) have nginx as load balancer with next config upstream lb_mydomain { server mydomain.ru:81 weight=2; server 66.0.0.18 weight=6; } server { listen 80; server_name ~(?!mydomain.ru)(.*); client_max_body_size 20m; location / { proxy_pass http://lb_mydomain; proxy_redirect off; proxy_set_header Connection close; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_pass_header Set-Cookie; proxy_pass_header P3P; proxy_pass_header Content-Type; proxy_pass_header Content-Disposition; proxy_pass_header Content-Length; } } And configs from nginx.conf: user www-data; worker_processes 5; # worker_priority -1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 5024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; default_type application/octet-stream; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; # PHP-FPM (backend) upstream php-fpm { server 127.0.0.1:9000; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And config php-fpm: listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data pm = dynamic pm.max_children = 80 ;pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 ;pm.max_requests = 500 pm.status_path = /status ping.path = /ping ;ping.response = pong request_terminate_timeout = 30s request_slowlog_timeout = 10s slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M In top I see 20 php-fpm processes which use from 1% - 15% CPU. So it's have high load averadge: top - 15:36:22 up 34 days, 20:54, 1 user, load average: 5.98, 7.75, 8.78 Tasks: 218 total, 1 running, 217 sleeping, 0 stopped, 0 zombie Cpu(s): 34.1%us, 3.2%sy, 0.0%ni, 37.0%id, 24.8%wa, 0.0%hi, 0.9%si, 0.0%st Mem: 8183228k total, 7538584k used, 644644k free, 351136k buffers Swap: 9936892k total, 14636k used, 9922256k free, 990540k cached Second server(CPU - model name: Intel(R) Xeon(R) CPU E5504 @ 2.00GHz, 8 cores, 8GB RAM). Nginx configs from nginx.conf: user www-data; worker_processes 5; # worker_priority -1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 5024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; default_type application/octet-stream; #tcp_nopush on; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; # PHP-FPM (backend) upstream php-fpm { server 127.0.0.1:9000; } include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; } And config of php-fpm: listen = 127.0.0.1:9000 ;listen.backlog = -1 ;listen.allowed_clients = 127.0.0.1 ;listen.owner = www-data ;listen.group = www-data ;listen.mode = 0666 user = www-data group = www-data pm = dynamic pm.max_children = 50 ;pm.start_servers = 20 pm.min_spare_servers = 5 pm.max_spare_servers = 35 ;pm.max_requests = 500 ;pm.status_path = /status ;ping.path = /ping ;ping.response = pong ;request_terminate_timeout = 0 ;request_slowlog_timeout = 0 ;slowlog = /var/log/php-fpm.log.slow ;rlimit_files = 1024 ;rlimit_core = 0 ;chroot = chdir = /var/www ;catch_workers_output = yes ;env[HOSTNAME] = $HOSTNAME ;env[PATH] = /usr/local/bin:/usr/bin:/bin ;env[TMP] = /tmp ;env[TMPDIR] = /tmp ;env[TEMP] = /tmp ;php_admin_value[sendmail_path] = /usr/sbin/sendmail -t -i -f [email protected] ;php_flag[display_errors] = off ;php_admin_value[error_log] = /var/log/fpm-php.www.log ;php_admin_flag[log_errors] = on ;php_admin_value[memory_limit] = 32M In top I see 50 php-fpm processes which use from 10% - 25% CPU. So it's have high load averadge: top - 15:53:05 up 33 days, 1:15, 1 user, load average: 41.35, 40.28, 39.61 Tasks: 239 total, 40 running, 199 sleeping, 0 stopped, 0 zombie Cpu(s): 96.5%us, 3.1%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.4%si, 0.0%st Mem: 8185560k total, 7804224k used, 381336k free, 161648k buffers Swap: 19802108k total, 16k used, 19802092k free, 5068112k cached Third server is server with database postgresql. Also i try ab -n 50 -c 5 http://www.mydomain.ru/ And I get next info: Complete requests: 50 Failed requests: 48 (Connect: 0, Receive: 0, Length: 48, Exceptions: 0) Write errors: 0 Total transferred: 9271367 bytes HTML transferred: 9247767 bytes Requests per second: 1.02 [#/sec] (mean) Time per request: 4882.427 [ms] (mean) Time per request: 976.486 [ms] (mean, across all concurrent requests) Transfer rate: 185.44 [Kbytes/sec] received Please advise how can I make lower level of load average?

    Read the article

  • How to resolve CGDirectDisplayID changing issues on newer multi-GPU Apple laptops in Core Foundation

    - by Dave Gallagher
    In Mac OS X, every display gets a unique CGDirectDisplayID number assigned to it. You can use CGGetActiveDisplayList() or [NSScreen screens] to access them, among others. Per Apple's docs: A display ID can persist across processes and system reboot, and typically remains constant as long as certain display parameters do not change. On newer mid-2010 MacBook Pro's, Apple started using auto-switching Intel/nVidia graphics. Laptops have two GPU's, a low-powered Intel, and a high-powered nVidia. Previous dual-GPU laptops (2009 models) didn't have auto-GPU switching, and required the user to make a settings change, logoff, and then logon again to make a GPU switch occur. Even older systems only had one GPU. There's an issue with the mid-2010 models where CGDirectDisplayID's don't remain the same when a display switches from one GPU to the next. For example: Laptop powers on. Built-In LCD Screen is driven by Intel chipset. Display ID: 30002 External Display is plugged in. Built-In LCD Screen switches to nVidia chipset. It's display ID changes: 30004 External Display is driven by nVidia chipset. ...at this point, the Intel chipset is dormant... User unplugs External Display. Built-In LCD Screen switches back to Intel chipset. It's display ID changes back to original: 30002 My question is, how can I match an old display ID to a new display ID when they alter due to a GPU change? Thought about: I've noticed that the display ID only changes by 2, but I don't have enough test Mac's available to determine if this is common to all new MacBook Pro's, or just mine. Kind of a kludge if "just check for display ID's which are +/-2 from one another" works, anyway. Tried: CGDisplayRegisterReconfigurationCallback(), which notifies before-and-after when displays are going to change, has no matching logic. Putting something like this inside a method registered with it doesn't work: // Run before display settings change: CGDirectDisplayID directDisplayID = ...; io_service_t servicePort = CGDisplayIOServicePort(directDisplayID); CFDictionaryRef oldInfoDict = IODisplayCreateInfoDictionary(servicePort, kIODisplayMatchingInfo); // ...display settings change... // Run after display settings change: CGDirectDisplayID directDisplayID = ...; io_service_t servicePort = CGDisplayIOServicePort(directDisplayID); CFDictionaryRef newInfoDict = IODisplayCreateInfoDictionary(servicePort, kIODisplayMatchingInfo); BOOL match = IODisplayMatchDictionaries(oldInfoDict, newInfoDict, 0); if (match) NSLog(@"Displays are a match"); else NSLog(@"Displays are not a match"); What's happening above is I'm caching oldInfoDict before display settings change, letting them change, and then comparing it to newInfoDict by using IODisplayMatchDictionaries(), which will say either "yes, both displays are the same!" or "no, both displays are not the same." Unfortunately, it does not return YES if GPU's have changed for a monitor. Example of the dictionary's it's comparing: // oldInfoDict (Display ID: 30002) oldInfoDict: { DisplayProductID = 40144; DisplayVendorID = 1552; IODisplayLocation = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer/display0/AppleBacklightDisplay"; } // newInfoDict (Display ID: 30004) newInfoDict: { DisplayProductID = 40144; DisplayVendorID = 1552; IODisplayLocation = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/P0P2@1/IOPCI2PCIBridge/GFX0@0/NVDA,Display-A@0/NVDA/display0/AppleBacklightDisplay"; } As you can see, the IODisplayLocation key changes when GPU's are switched, hence IODisplayMatchDictionaries() doesn't work. I can, theoretically, compared just the DisplayProductID and DisplayVendorID keys, but I'm writing end-user software, and am worried of a situation where users have two or more identical monitors plugged in. Any help is greatly appreciated! :)

    Read the article

  • Minimum-Waste Print Job Grouping Algorithm?

    - by Matt Mc
    I work at a publishing house and I am setting up one of our presses for "ganging", in other words, printing multiple jobs simultaneously. Given that different print jobs can have different quantities, and anywhere from 1 to 20 jobs might need to be considered at a time, the problem would be to determine which jobs to group together to minimize waste (waste coming from over-printing on smaller-quantity jobs in a given set, that is). Given the following stable data: All jobs are equal in terms of spatial size--placement on paper doesn't come into consideration. There are three "lanes", meaning that three jobs can be printed simultaneously. Ideally, each lane has one job. Part of the problem is minimizing how many lanes each job is run on. If necessary, one job could be run on two lanes, with a second job on the third lane. The "grouping" waste from a given set of jobs (let's say the quantities of them are x, y and z) would be the highest number minus the two lower numbers. So if x is the higher number, the grouping waste would be (x - y) + (x - z). Otherwise stated, waste is produced by printing job Y and Z (in excess of their quantities) up to the quantity of X. The grouping waste would be a qualifier for the given set, meaning it could not exceed a certain quantity or the job would simply be printed alone. So the question is stated: how to determine which sets of jobs are grouped together, out of any given number of jobs, based on the qualifiers of 1) Three similar quantities OR 2) Two quantities where one is approximately double the other, AND with the aim of minimal total grouping waste across the various sets. (Edit) Quantity Information: Typical job quantities can be from 150 to 350 on foreign languages, or 500 to 1000 on English print runs. This data can be used to set up some scenarios for an algorithm. For example, let's say you had 5 jobs: 1000, 500, 500, 450, 250 By looking at it, I can see a couple of answers. Obviously (1000/500/500) is not efficient as you'll have a grouping waste of 1000. (500/500/450) is better as you'll have a waste of 50, but then you run (1000) and (250) alone. But you could also run (1000/500) with 1000 on two lanes, (500/250) with 500 on two lanes and then (450) alone. In terms of trade-offs for lane minimization vs. wastage, we could say that any grouping waste over 200 is excessive. (End Edit) ...Needless to say, quite a problem. (For me.) I am a moderately skilled programmer but I do not have much familiarity with algorithms and I am not fully studied in the mathematics of the area. I'm I/P writing a sort of brute-force program that simply tries all options, neglecting any option tree that seems to have excessive grouping waste. However, I can't help but hope there's an easier and more efficient method. I've looked at various websites trying to find out more about algorithms in general and have been slogging my way through the symbology, but it's slow going. Unfortunately, Wikipedia's articles on the subject are very cross-dependent and it's difficult to find an "in". The only thing I've been able to really find would seem to be a definition of the rough type of algorithm I need: "Exclusive Distance Clustering", one-dimensionally speaking. I did look at what seems to be the popularly referred-to algorithm on this site, the Bin Packing one, but I was unable to see exactly how it would work with my problem. Any help is appreciated. :)

    Read the article

  • Export GridView to Excel

    - by nCdy
    using Matt's util code (a bit edited for Unicode text) public class GridViewExportUtil { /// <param name="fileName"></param> /// <param name="gv"></param> public static void Export(string fileName, GridView gv) { HttpContext.Current.Response.Clear(); HttpContext.Current.Response.ContentType = "application/ms-excel"; HttpContext.Current.Response.Cache.SetCacheability(HttpCacheability.NoCache); HttpContext.Current.Response.Charset = System.Text.Encoding.Unicode.EncodingName; HttpContext.Current.Response.ContentEncoding = System.Text.Encoding.Unicode; HttpContext.Current.Response.BinaryWrite(System.Text.Encoding.Unicode.GetPreamble()); HttpContext.Current.Response.AddHeader( "content-disposition", string.Format(//"content-disposition", "attachment; filename=Report.xml"));//, fileName)); // Need .XLS file using (StringWriter sw = new StringWriter()) { using (HtmlTextWriter htw = new HtmlTextWriter(sw)) { // Create a form to contain the grid Table table = new Table(); // add the header row to the table if (gv.HeaderRow != null) { GridViewExportUtil.PrepareControlForExport(gv.HeaderRow); table.Rows.Add(gv.HeaderRow); } // add each of the data rows to the table foreach (GridViewRow row in gv.Rows) { GridViewExportUtil.PrepareControlForExport(row); table.Rows.Add(row); } // add the footer row to the table if (gv.FooterRow != null) { GridViewExportUtil.PrepareControlForExport(gv.FooterRow); table.Rows.Add(gv.FooterRow); } // render the table into the htmlwriter table.RenderControl(htw); // render the htmlwriter into the response HttpContext.Current.Response.Write(sw.ToString()); HttpContext.Current.Response.End(); } } } /// <summary> /// Replace any of the contained controls with literals /// </summary> /// <param name="control"></param> private static void PrepareControlForExport(Control control) { for (int i = 0; i < control.Controls.Count; i++) { Control current = control.Controls[i]; if (current is LinkButton) { control.Controls.Remove(current); control.Controls.AddAt(i, new LiteralControl((current as LinkButton).Text)); } else if (current is ImageButton) { control.Controls.Remove(current); control.Controls.AddAt(i, new LiteralControl((current as ImageButton).AlternateText)); } else if (current is HyperLink) { control.Controls.Remove(current); control.Controls.AddAt(i, new LiteralControl((current as HyperLink).Text)); } else if (current is DropDownList) { control.Controls.Remove(current); control.Controls.AddAt(i, new LiteralControl((current as DropDownList).SelectedItem.Text)); } else if (current is CheckBox) { control.Controls.Remove(current); control.Controls.AddAt(i, new LiteralControl((current as CheckBox).Checked ? "True" : "False")); } if (current.HasControls()) { GridViewExportUtil.PrepareControlForExport(current); } } } Question : How to make downloaded file editable (not Read only) And ... XLS wont opens with Unicode format. When I changing format to UTF8 I can't see Russian words :S Second question : How to make Unicode for .xls Third question : How can I save table lines ? Thank you.

    Read the article

  • Dynamic model choice field in django formset using multiple select elements

    - by Aryeh Leib Taurog
    I posted this question on the django-users list, but haven't had a reply there yet. I have models that look something like this: class ProductGroup(models.Model): name = models.CharField(max_length=10, primary_key=True) def __unicode__(self): return self.name class ProductRun(models.Model): date = models.DateField(primary_key=True) def __unicode__(self): return self.date.isoformat() class CatalogItem(models.Model): cid = models.CharField(max_length=25, primary_key=True) group = models.ForeignKey(ProductGroup) run = models.ForeignKey(ProductRun) pnumber = models.IntegerField() def __unicode__(self): return self.cid class Meta: unique_together = ('group', 'run', 'pnumber') class Transaction(models.Model): timestamp = models.DateTimeField() user = models.ForeignKey(User) item = models.ForeignKey(CatalogItem) quantity = models.IntegerField() price = models.FloatField() Let's say there are about 10 ProductGroups and 10-20 relevant ProductRuns at any given time. Each group has 20-200 distinct product numbers (pnumber), so there are at least a few thousand CatalogItems. I am working on formsets for the Transaction model. Instead of a single select menu with the several thousand CatalogItems for the ForeignKey field, I want to substitute three drop-down menus, for group, run, and pnumber, which uniquely identify the CatalogItem. I'd also like to limit the choices in the second two drop-downs to those runs and pnumbers which are available for the currently selected product group (I can update them via AJAX if the user changes the product group, but it's important that the initial page load as described without relying on AJAX). What's the best way to do this? As a point of departure, here's what I've tried/considered so far: My first approach was to exclude the item foreign key field from the form, add the substitute dropdowns by overriding the add_fields method of the formset, and then extract the data and populate the fields manually on the model instances before saving them. It's straightforward and pretty simple, but it's not very reusable and I don't think it is the right way to do this. My second approach was to create a new field which inherits both MultiValueField and ModelChoiceField, and a corresponding MultiWidget subclass. This seems like the right approach. As Malcolm Tredinnick put it in a django-users discussion, "the 'smarts' of a field lie in the Field class." The problem I'm having is when/where to fetch the lists of choices from the db. The code I have now does it in the Field's __init__, but that means I have to know which ProductGroup I'm dealing with before I can even define the Form class, since I have to instantiate the Field when I define the form. So I have a factory function which I call at the last minute from my view--after I know what CatalogItems I have and which product group they're in--to create form/formset classes and instantiate them. It works, but I wonder if there's a better way. After all, the field should be able to determine the correct choices much later on, once it knows its current value. Another problem is that my implementation limits the entire formset to transactions relating to (CatalogItems from) a single ProductGroup. A third possibility I'm entertaining is to put it all in the Widget class. Once I have the related model instance, or the cid, or whatever the widget is given, I can get the ProductGroup and construct the drop-downs. This would solve the issues with my second approach, but doesn't seem like the right approach.

    Read the article

  • Motherboard/PSU crippling USB and Sata

    - by celebdor
    I very recently bought a new desktop computer. The motherboard is: Z77MX-D3H and the power supply is ocz zs series 550w. The issue I have is that once I boot to the operating system (I have tried with fedora and Ubuntu with kernels 2.6.38 - 3.4.0), my hard drive (2.5" Magnetic) occasionally makes a power switch noise and it resets. Needless to say, when this drive is the OS drive, the OS crashes. I also have a SSD that works fine with the same OS configurations, but if I have the magnetic hard drive attached as second drive, it works erratically and the reconnects result in corrupted data. I also noticed that whenever I plug an external hard drive USB2.0 or USB3.0 to the computer the issue with the reconnects is even worse: [ 52.198441] sd 7:0:0:0: [sdc] Spinning up disk... [ 57.955811] usb 4-3: USB disconnect, device number 3 [ 58.023687] .ready [ 58.023914] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.023919] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.023932] sd 7:0:0:0: [sdc] Sense not available. [ 58.024061] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024063] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024064] sd 7:0:0:0: [sdc] Sense not available. [ 58.024099] sd 7:0:0:0: [sdc] Write Protect is off [ 58.024101] sd 7:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 58.024135] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024137] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024400] sd 7:0:0:0: [sdc] READ CAPACITY(16) failed [ 58.024402] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024405] sd 7:0:0:0: [sdc] Sense not available. [ 58.024448] sd 7:0:0:0: [sdc] READ CAPACITY failed [ 58.024450] sd 7:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 58.024451] sd 7:0:0:0: [sdc] Sense not available. [ 58.024469] sd 7:0:0:0: [sdc] Asking for cache data failed [ 58.024471] sd 7:0:0:0: [sdc] Assuming drive cache: write through [ 58.024472] sd 7:0:0:0: [sdc] Attached SCSI disk [ 58.407725] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd [ 58.424921] scsi8 : usb-storage 4-3:1.0 [ 59.424185] scsi 8:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 59.424406] scsi 8:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 59.425098] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 59.425176] ses 8:0:0:1: Attached Enclosure device [ 59.425248] ses 8:0:0:1: Attached scsi generic sg3 type 13 [ 61.845836] sd 8:0:0:0: [sdc] 976707584 512-byte logical blocks: (500 GB/465 GiB) [ 61.845838] sd 8:0:0:0: [sdc] 4096-byte physical blocks [ 61.846336] sd 8:0:0:0: [sdc] Write Protect is off [ 61.846338] sd 8:0:0:0: [sdc] Mode Sense: 47 00 10 08 [ 61.846718] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.846720] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.848105] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.848106] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.857147] sdc: sdc1 [ 61.858915] sd 8:0:0:0: [sdc] No Caching mode page present [ 61.858916] sd 8:0:0:0: [sdc] Assuming drive cache: write through [ 61.858918] sd 8:0:0:0: [sdc] Attached SCSI disk [ 69.875809] usb 4-3: USB disconnect, device number 4 [ 70.275816] usb 4-3: new SuperSpeed USB device number 5 using xhci_hcd [ 70.293063] scsi9 : usb-storage 4-3:1.0 [ 71.292257] scsi 9:0:0:0: Direct-Access WD My Passport 0740 1003 PQ: 0 ANSI: 6 [ 71.292505] scsi 9:0:0:1: Enclosure WD SES Device 1003 PQ: 0 ANSI: 6 [ 71.293527] sd 9:0:0:0: Attached scsi generic sg2 type 0 [ 71.293668] ses 9:0:0:1: Attached Enclosure device [ 71.293758] ses 9:0:0:1: Attached scsi generic sg3 type 13 [ 73.323804] usb 4-3: USB disconnect, device number 5 [ 101.868078] ses 9:0:0:1: Device offlined - not ready after error recovery [ 101.868124] ses 9:0:0:1: Failed to get diagnostic page 0x50000 [ 101.868131] ses 9:0:0:1: Failed to bind enclosure -19 [ 101.868288] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868292] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868296] sd 9:0:0:0: [sdc] Sense not available. [ 101.868428] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868434] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868439] sd 9:0:0:0: [sdc] Sense not available. [ 101.868468] sd 9:0:0:0: [sdc] Write Protect is off [ 101.868473] sd 9:0:0:0: [sdc] Mode Sense: 00 00 00 00 [ 101.868580] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868584] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868845] sd 9:0:0:0: [sdc] READ CAPACITY(16) failed [ 101.868849] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868854] sd 9:0:0:0: [sdc] Sense not available. [ 101.868894] sd 9:0:0:0: [sdc] READ CAPACITY failed [ 101.868898] sd 9:0:0:0: [sdc] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK [ 101.868903] sd 9:0:0:0: [sdc] Sense not available. [ 101.868961] sd 9:0:0:0: [sdc] Asking for cache data failed [ 101.868966] sd 9:0:0:0: [sdc] Assuming drive cache: write through [ 101.868969] sd 9:0:0:0: [sdc] Attached SCSI disk Now, if I plug the same drive to the powered usb 2.0 hub of my monitor, the issue is not reproduced (at least on a 20h long operation). Also the issue of the usb reconnects is less frequent if the hard drive is plugged before I switch on the computer. Does anybody have some advice as to what I could do? Which is the faulty part/s that I should replace? As for me, I really don't know if to point my finger to the PSU or the Motherboard (I have updated to the latest firmware and checked the BIOS settings several times). EDIT: The reconnects are happening both in the Sata connected drives and the USBX connected drives.

    Read the article

  • Weighted round robins via TTL - possible?

    - by Joe Hopfgartner
    I currently use DNS round robin for load balancing, which works great. The records look like this (I have a ttl of 120 seconds) ;; ANSWER SECTION: orion.2x.to. 116 IN A 80.237.201.41 orion.2x.to. 116 IN A 87.230.54.12 orion.2x.to. 116 IN A 87.230.100.10 orion.2x.to. 116 IN A 87.230.51.65 I learned that not every ISP / device treats such a response the same way. For example some DNS servers rotate the addresses randomly or always cycle them through. Some just propagate the first entry, others try to determine which is best (regionally near) by looking at the ip address. However if the userbase is big enough (spreads over multiple ISPs etc) it balances pretty well. The discrepancies from highest to lowest loaded server hardly every exceeds 15%. However now I have the problem that I am introducing more servers into the systems, that not all have the same capacities. I currently only have 1gbps servers, but I want to work with 100mbit and also 10gbps servers too. So what I want is I want to introduce a server with 10 GBps with a weight of 100, a 1 gbps server with a weight of 10 and a 100 mbit server with a weight of 1. I used to add servers twice to bring more traffic to them (which worked nice. the bandwidth doubled almost.) But adding a 10gbit server 100 times to DNS is a bit rediculous. So I thought about using the TTL. If I give server A 240 seconds ttl and server B only 120 seconds (which is about about the minimum to use for round robin, as a lot of dns servers set to 120 if a lower ttl is specified.. so i have heard) I think something like this should occour in an ideal scenario: first 120 seconds 50% of requests get server A -> keep it for 240 seconds. 50% of requests get server B -> keep it for 120 seconds second 120 seconds 50% of requests still have server A cached -> keep it for another 120 seconds. 25% of requests get server A -> keep it for 240 seconds 25% of requests get server B -> keep it for 120 seconds third 120 seconds 25% will get server A (from the 50% of Server A that now expired) -> cache 240 sec 25% will get server B (from the 50% of Server A that now expired) -> cache 120 sec 25% will have server A cached for another 120 seconds 12.5% will get server B (from the 25% of server B that now expired) -> cache 120sec 12.5% will get server A (from the 25% of server B that now expired) -> cache 240 sec fourth 120 seconds 25% will have server A cached -> cache for another 120 secs 12.5% will get server A (from the 25% of b that now expired) -> cache 240 secs 12.5% will get server B (from the 25% of b that now expired) -> cache 120 secs 12.5% will get server A (from the 25% of a that now expired) -> cache 240 secs 12.5% will get server B (from the 25% of a that now expired) -> cache 120 secs 6.25% will get server A (from the 12.5% of b that now expired) -> cache 240 secs 6.25% will get server B (from the 12.5% of b that now expired) -> cache 120 secs 12.5% will have server A cached -> cache another 120 secs ... i think i lost something at this point but i think you get the idea.... As you can see this gets pretty complicated to predict and it will for sure not work out like this in practice. But it should definitely have an effect on the distribution! I know that weighted round robin exists and is just controlled by the root server. It just cycles through dns records when responding and returns dns records with a set propability that corresponds to the weighting. My DNS server does not support this, and my requirements are not that precise. If it doesnt weight perfectly its okay, but it should go into the right direction. I think using the TTL field could be a more elegant and easier solution - and it deosnt require a dns server that controls this dynamically, which saves resources - which is in my opinion the whole point of dns load balancing vs hardware load balancers. My question now is... are there any best prectices / methos / rules of thumb to weight round robin distribution using the TTL attribute of DNS records? Edit: The system is a forward proxy server system. The amount of Bandwidth (not requests) exceeds what one single server with ethernet can handle. So I need a balancing solution that distributes the bandwidth to several servers. Are there any alternative methods than using DNS? Of course I can use a load balancer with fibre channel etc, but the costs are rediciulous and it also increases only the width of the bottleneck and does not eliminate it. The only thing i can think of are anycast (is it anycast or multicast?) ip addresses, but I don't have the means to set up such a system.

    Read the article

  • Cross-platform, human-readable, du on root partition that truly ignores other filesystems

    - by nice_line
    I hate this so much: Linux builtsowell 2.6.18-274.7.1.el5 #1 SMP Mon Oct 17 11:57:14 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux df -kh Filesystem Size Used Avail Use% Mounted on /dev/mapper/mpath0p2 8.8G 8.7G 90M 99% / /dev/mapper/mpath0p6 2.0G 37M 1.9G 2% /tmp /dev/mapper/mpath0p3 5.9G 670M 4.9G 12% /var /dev/mapper/mpath0p1 494M 86M 384M 19% /boot /dev/mapper/mpath0p7 7.3G 187M 6.7G 3% /home tmpfs 48G 6.2G 42G 14% /dev/shm /dev/mapper/o10g.bin 25G 7.4G 17G 32% /app/SIP/logs /dev/mapper/o11g.bin 25G 11G 14G 43% /o11g tmpfs 4.0K 0 4.0K 0% /dev/vx lunmonster1q:/vol/oradb_backup/epmxs1q1 686G 507G 180G 74% /rpmqa/backup lunmonster1q:/vol/oradb_redo/bisxs1q1 4.0G 1.6G 2.5G 38% /bisxs1q/rdoctl1 lunmonster1q:/vol/oradb_backup/bisxs1q1 686G 507G 180G 74% /bisxs1q/backup lunmonster1q:/vol/oradb_exp/bisxs1q1 2.0T 1.1T 984G 52% /bisxs1q/exp lunmonster2q:/vol/oradb_home/bisxs1q1 10G 174M 9.9G 2% /bisxs1q/home lunmonster2q:/vol/oradb_data/bisxs1q1 52G 5.2G 47G 10% /bisxs1q/oradata lunmonster1q:/vol/oradb_redo/bisxs1q2 4.0G 1.6G 2.5G 38% /bisxs1q/rdoctl2 ip-address1:/vol/oradb_home/cspxs1q1 10G 184M 9.9G 2% /cspxs1q/home ip-address2:/vol/oradb_backup/cspxs1q1 674G 314G 360G 47% /cspxs1q/backup ip-address2:/vol/oradb_redo/cspxs1q1 4.0G 1.5G 2.6G 37% /cspxs1q/rdoctl1 ip-address2:/vol/oradb_exp/cspxs1q1 4.1T 1.5T 2.6T 37% /cspxs1q/exp ip-address2:/vol/oradb_redo/cspxs1q2 4.0G 1.5G 2.6G 37% /cspxs1q/rdoctl2 ip-address1:/vol/oradb_data/cspxs1q1 160G 23G 138G 15% /cspxs1q/oradata lunmonster1q:/vol/oradb_exp/epmxs1q1 2.0T 1.1T 984G 52% /epmxs1q/exp lunmonster2q:/vol/oradb_home/epmxs1q1 10G 80M 10G 1% /epmxs1q/home lunmonster2q:/vol/oradb_data/epmxs1q1 330G 249G 82G 76% /epmxs1q/oradata lunmonster1q:/vol/oradb_redo/epmxs1q2 5.0G 609M 4.5G 12% /epmxs1q/rdoctl2 lunmonster1q:/vol/oradb_redo/epmxs1q1 5.0G 609M 4.5G 12% /epmxs1q/rdoctl1 /dev/vx/dsk/slaxs1q/slaxs1q-vol1 183G 17G 157G 10% /slaxs1q/backup /dev/vx/dsk/slaxs1q/slaxs1q-vol4 173G 58G 106G 36% /slaxs1q/oradata /dev/vx/dsk/slaxs1q/slaxs1q-vol5 75G 952M 71G 2% /slaxs1q/exp /dev/vx/dsk/slaxs1q/slaxs1q-vol2 9.8G 381M 8.9G 5% /slaxs1q/home /dev/vx/dsk/slaxs1q/slaxs1q-vol6 4.0G 1.6G 2.2G 42% /slaxs1q/rdoctl1 /dev/vx/dsk/slaxs1q/slaxs1q-vol3 4.0G 1.6G 2.2G 42% /slaxs1q/rdoctl2 /dev/mapper/appoem 30G 1.3G 27G 5% /app/em Yet, I equally, if not quite a bit more, also hate this: SunOS solarious 5.10 Generic_147440-19 sun4u sparc SUNW,SPARC-Enterprise Filesystem size used avail capacity Mounted on kiddie001Q_rpool/ROOT/s10s_u8wos_08a 8G 7.7G 1.3G 96% / /devices 0K 0K 0K 0% /devices ctfs 0K 0K 0K 0% /system/contract proc 0K 0K 0K 0% /proc mnttab 0K 0K 0K 0% /etc/mnttab swap 15G 1.8M 15G 1% /etc/svc/volatile objfs 0K 0K 0K 0% /system/object sharefs 0K 0K 0K 0% /etc/dfs/sharetab fd 0K 0K 0K 0% /dev/fd kiddie001Q_rpool/ROOT/s10s_u8wos_08a/var 31G 8.3G 6.6G 56% /var swap 512M 4.6M 507M 1% /tmp swap 15G 88K 15G 1% /var/run swap 15G 0K 15G 0% /dev/vx/dmp swap 15G 0K 15G 0% /dev/vx/rdmp /dev/dsk/c3t4d4s0 3 20G 279G 41G 88% /fs_storage /dev/vx/dsk/oracle/ora10g-vol1 292G 214G 73G 75% /o10g /dev/vx/dsk/oec/oec-vol1 64G 33G 31G 52% /oec/runway /dev/vx/dsk/oracle/ora9i-vol1 64G 33G 31G 59% /o9i /dev/vx/dsk/home 23G 18G 4.7G 80% /export/home /dev/vx/dsk/dbwork/dbwork-vol1 292G 214G 73G 92% /db03/wk01 /dev/vx/dsk/oradg/ebusredovol 2.0G 475M 1.5G 24% /u21 /dev/vx/dsk/oradg/ebusbckupvol 200G 32G 166G 17% /u31 /dev/vx/dsk/oradg/ebuscrtlvol 2.0G 475M 1.5G 24% /u20 kiddie001Q_rpool 31G 97K 6.6G 1% /kiddie001Q_rpool monsterfiler002q:/vol/ebiz_patches_nfs/NSA0304 203G 173G 29G 86% /oracle/patches /dev/odm 0K 0K 0K 0% /dev/odm The people with the authority don't rotate logs or delete packages after install in my environment. Standards, remediation, cohesion...all fancy foreign words to me. ============== How am I supposed to deal with / filesystem full issues across multiple platforms that have a devastating number of mounts? On Red Hat el5, du -x apparently avoids traversal into other filesystems. While this may be so, it does not appear to do anything if run from the / directory. On Solaris 10, the equivalent flag is du -d, which apparently packs no surprises, allowing Sun to uphold its legacy of inconvenience effortlessly. (I'm hoping I've just been doing it wrong.) I offer up for sacrifice my Frankenstein's monster. Tell me how ugly it is. Tell me I should download forbidden 3rd party software. Tell me I should perform unauthorized coreutils updates, piecemeal, across 2000 systems, with no single sign-on, no authorized keys, and no network update capability. Then, please help me make this bastard better: pwd / du * | egrep -v "$(echo $(df | awk '{print $1 "\n" $5 "\n" $6}' | \ cut -d\/ -f2-5 | egrep -v "[0-9]|^$|Filesystem|Use|Available|Mounted|blocks|vol|swap")| \ sed 's/ /\|/g')" | egrep -v "proc|sys|media|selinux|dev|platform|system|tmp|tmpfs|mnt|kernel" | \ cut -d\/ -f1-2 | sort -k2 -k1,1nr | uniq -f1 | sort -k1,1n | cut -f2 | xargs du -shx | \ egrep "G|[5-9][0-9]M|[1-9][0-9][0-9]M" My biggest failure and regret is that it still requires a single character edit for Solaris: pwd / du * | egrep -v "$(echo $(df | awk '{print $1 "\n" $5 "\n" $6}' | \ cut -d\/ -f2-5 | egrep -v "[0-9]|^$|Filesystem|Use|Available|Mounted|blocks|vol|swap")| \ sed 's/ /\|/g')" | egrep -v "proc|sys|media|selinux|dev|platform|system|tmp|tmpfs|mnt|kernel" | \ cut -d\/ -f1-2 | sort -k2 -k1,1nr | uniq -f1 | sort -k1,1n | cut -f2 | xargs du -shd | \ egrep "G|[5-9][0-9]M|[1-9][0-9][0-9]M" This will exclude all non / filesystems in a du search from the / directory by basically munging an egrepped df from a second pipe-delimited egrep regex subshell exclusion that is naturally further excluded upon by a third egrep in what I would like to refer to as "the whale." The munge-fest frantically escalates into some xargs du recycling where -x/-d is actually useful, and a final, gratuitous egrep spits out a list of directories that almost feels like an accomplishment: Linux: 54M etc/gconf 61M opt/quest 77M opt 118M usr/ ##===\ 149M etc 154M root 303M lib/modules 313M usr/java ##====\ 331M lib 357M usr/lib64 ##=====\ 433M usr/lib ##========\ 1.1G usr/share ##=======\ 3.2G usr/local ##========\ 5.4G usr ##<=============Ascending order to parent 94M app/SIP ##<==\ 94M app ##<=======Were reported as 7gb and then corrected by second du with -x. Solaris: 63M etc 490M bb 570M root/cores.ric.20100415 1.7G oec/archive 1.1G root/packages 2.2G root 1.7G oec Guess what? It's really slow. Edit: Are there any bash one-liner heroes out there than can turn my bloated abomination into divine intervention, or at least something resembling gingerly copypasta?

    Read the article

  • Large number of soft page faults when assigning a TJpegImage to a TBitmap

    - by Robert Oschler
    I have a Delphi 6 Pro application that processes incoming jpeg frames from a streaming video server. The code works but I recently noticed that it generates a huge number of soft page faults over time. After doing some investigation, the page faults appear to be coming from one particular graphics operation. Note, the uncompressed bitmaps in question are 320 x 240 or about 300 KB in size so it's not due to the handling of large images. The number of page faults being generated isn't tolerable. Over an hour it can easily top 1000000 page faults. I created a stripped down test case that executes the code I have included below on a timer, 10 times a second. The page faults appear to happen when I try to assign the TJpegImage to a TBitmap in the GetBitmap() method. I know this because I commented out that line and the page faults do not occur. The assign() triggers a decompression operation on the part of TJpegImage as it pushes the decompressed bits into a newly created bitmap that GetBitmap() returns. When I run Microsoft's pfmon utility (page fault monitor), I get a huge number of soft page fault error lines concerning RtlFillMemoryUlong, so it appears to happen during a memory buffer fill operation. One puzzling note. The summary part of pfmon's report where it shows which DLL caused what page fault does not show any DLL names in the far left column. I tried this on another system and it happens there too. Can anyone suggest a fix or a workaround? Here's the code. Note, IReceiveBufferForClientSocket is a simple class object that holds bytes in an accumulating buffer. function GetBitmap(theJpegImage: TJpegImage): Graphics.TBitmap; begin Result := TBitmap.Create; Result.Assign(theJpegImage); end; // --------------------------------------------------------------- procedure processJpegFrame(intfReceiveBuffer: IReceiveBufferForClientSocket); var theBitmap: TBitmap; theJpegStream, theBitmapStream: TMemoryStream; theJpegImage: TJpegImage; begin theBitmap := nil; theJpegImage := TJPEGImage.Create; theJpegStream:= TMemoryStream.Create; theBitmapStream := TMemoryStream.Create; try // 2 // ************************ BEGIN JPEG FRAME PROCESSING // Load the JPEG image from the receive buffer. theJpegStream.Size := intfReceiveBuffer.numBytesInBuffer; Move(intfReceiveBuffer.bufPtr^, theJpegStream.Memory^, intfReceiveBuffer.numBytesInBuffer); theJpegImage.LoadFromStream(theJpegStream); // Convert to bitmap. theBitmap := GetBitmap(theJpegImage); finally // Free memory objects. if Assigned(theBitmap) then theBitmap.Free; if Assigned(theJpegImage) then theJpegImage.Free; if Assigned(theBitmapStream) then theBitmapStream.Free; if Assigned(theJpegStream) then theJpegStream.Free; end; // try() end; // --------------------------------------------------------------- procedure TForm1.Timer1Timer(Sender: TObject); begin processJpegFrame(FIntfReceiveBufferForClientSocket); end; // --------------------------------------------------------------- procedure TForm1.FormCreate(Sender: TObject); var S: string; begin FIntfReceiveBufferForClientSocket := TReceiveBufferForClientSocket.Create(1000000); S := loadStringFromFile('c:\test.jpg'); FIntfReceiveBufferForClientSocket.assign(S); end; // --------------------------------------------------------------- Thanks, Robert

    Read the article

  • Cannot Logout of Facebook with Facebook C# SDK

    - by Ryan Smyth
    I think I've read just about everything out there on the topic of logging out of Facebook inside of a Desktop application. Nothing so far works. Specifically, I would like to log the user out so that they can switch identities, e.g. People sharing a computer at home could then use the software with their own Facebook accounts, but with no chance to switch accounts, it's quite messy. (Have not yet tested switching Windows users accounts as that is simply far too much to ask of the end user and should not be necessary.) Now, I should say that I have set the application to use these permissions: string[] permissions = new string[] { "user_photos", "publish_stream", "offline_access" }; So, "offline_access" is included there. I do not know if this does/should affect logging out or not. Again, my purpose for logging out is merely to switch users. (If there's a better approach, please let me know.) The purported solutions seem to be: Use the JavaScript SDK (FB.logout()) Use "m.facebook.com" instead Create your own URL (and possibly use m.facebook.com) Create your own URL and use the session variable (in ASP.NET) The first is kind of silly. Why resort to JavaScript when you're using C#? It's kind of a step backwards and has a lot of additional overhead in a desktop application. (I have not tried this as it's simply disgustingly messy to do this in a desktop application.) If anyone can confirm that this is the only working method, please do so. I'm desperately trying to avoid it. The second doesn't work. Perhaps it worked in the past, but my umpteen attempts to get it to work have all failed. The third doesn't work. I've tried umpteen dozen variations with zero success. The last option there doesn't work for a desktop application because it's not ASP.NET and you don't have a session variable to work with. The Facebook C# SDK logout also no longer works. i.e. public FacebookLoginDialog(string appId, string[] extendedPermissions, bool logout) { IDictionary<string, object> loginParameters = new Dictionary<string, object> { { "response_type", "token" }, { "display", "popup" } }; _navigateUri = FacebookOAuthClient.GetLoginUrl(appId, null, extendedPermissions, logout, loginParameters); InitializeComponent(); } I remember it working in the past, but it no longer works now. (Which truly puzzles me...) It instead now directs the user to the Facebook mobile page, where the user must manually logout. Now, I could do browser automation to automatically click the logout link for the user, however, this is prone to breaking if Facebook updates the mobile UI. It is also messy, and possibly a worse solution than trying to use the JavaScript SDK FB.logout() method (though not by much). I have searched for some kind of documentation, however, I cannot find anything in the Facebook developer documentation that illustrates how to logout an application. Has anyone solved this problem, or seen any documentation that can be ported to work with the Facebook C# SDK? I am certainly open to using a WebClient or HttpClient/Response if anyone can point to some documentation that could work with it. I simply have not been able to find any low-level documentation that shows how this approach could work. Thank you in advance for any advice, pointers, or links.

    Read the article

  • SQL Server 2005 Blocking Problem (ASYNC_NETWORK_IO)

    - by ivankolo
    I am responsible for a third-party application (no access to source) running on IIS and SQL Server 2005 (500 concurrent users, 1TB data, 8 IIS servers). We have recently started to see significant blocking on the database (after months of running this application in production with no problems). This occurs at random intervals during the day, approximately every 30 minutes, and affects between 20 and 100 sessions each time. All of the sessions eventually hit the application time out and the sessions abort. The problem disappears and then gradually re-emerges. The SPID responsible for the blocking always has the following features: WAIT TYPE = ASYNC_NETWORK_IO The SQL being run is “(@claimid varchar(15))SELECT claimid, enrollid, status, orgclaimid, resubclaimid, primaryclaimid FROM claim WHERE primaryclaimid = @claimid AND primaryclaimid < claimid)”. This is relatively innocuous SQL that should only return one or two records, not a large dataset. NO OTHER SQL statements have been implicated in the blocking, only this SQL statement. This is parameterized SQL for which an execution plan is cached in sys.dm_exec_cached_plans. This SPID has an object-level S lock on the claim table, so all UPDATEs/INSERTs to the claim table are also blocked. HOST ID varies. Different web servers are responsible for the blocking sessions. E.g., sometimes we trace back to web server 1, sometimes web server 2. When we trace back to the web server implicated in the blocking, we see the following: There is always some sort of application related error in the Event Log on the web server, linked to the Host ID and Host Process ID from the SQL Session. The error messages vary, usually some sort of SystemOutofMemory. (These error messages seem to be similar to error messages that we have seen in the past without such dramatic consequences. We think was happening before, but didn’t lead to blocking. Why now?) No known problems with the network adapters on either the web servers or the SQL server. (In any event the record set returned by the offending query would be small.) Things ruled out: Indexes are regularly defragmented. Statistics regularly updated. Increased sample size of statistics on claim.primaryclaimid. Forced recompilation of the cached execution plan. Created a compound index with primaryclaimid, claimid. No networking problems. No known issues on the web server. No changes to application software on web servers. We hypothesize that the chain of events goes something like this: Web server process submits SQL above. SQL server executes the SQL, during which it acquires a lock on the claim table. Web server process gets an error and dies. SQL server session is hung waiting for the web server process to read the data set. SQL Server sessions that need to get X locks on parts of the claim table (anyone processing claims) are blocked by the lock on the claim table and remain blocked until they all hit the application time out. Any suggestions for troubleshooting while waiting for the vendor's assistance would be most welcome. Is there a way to force SQL Server to lock at the row/page level for this particular SQL statement only? Is there a way to set a threshold on ASYNC_NETWORK_IO waits only?

    Read the article

  • Sending changes from multiple tables in disconnected dataset to SQLServer...

    - by Stecy
    We have a third party application that accept calls using an XML RPC mechanism for calling stored procs. We send a ZIP-compressed dataset containing multiple tables with a bunch of update/delete/insert using this mechanism. On the other end, a CLR sproc decompress the data and gets the dataset. Then, the following code gets executed: using (var conn = new SqlConnection("context connection=true")) { if (conn.State == ConnectionState.Closed) conn.Open(); try { foreach (DataTable table in ds.Tables) { string columnList = ""; for (int i = 0; i < table.Columns.Count; i++) { if (i == 0) columnList = table.Columns[0].ColumnName; else columnList += "," + table.Columns[i].ColumnName; } var da = new SqlDataAdapter("SELECT " + columnList + " FROM " + table.TableName, conn); var builder = new SqlCommandBuilder(da); builder.ConflictOption = ConflictOption.OverwriteChanges; da.RowUpdating += onUpdatingRow; da.Update(ds, table.TableName); } } catch (....) { ..... } } Here's the event handler for the RowUpdating event: public static void onUpdatingRow(object sender, SqlRowUpdatingEventArgs e) { if ((e.StatementType == StatementType.Update) && (e.Command == null)) { e.Command = CreateUpdateCommand(e.Row, sender as SqlDataAdapter); e.Status = UpdateStatus.Continue; } } and the CreateUpdateCommand method: private static SqlCommand CreateUpdateCommand(DataRow row, SqlDataAdapter da) { string whereClause = ""; string setClause = ""; SqlConnection conn = da.SelectCommand.Connection; for (int i = 0; i < row.Table.Columns.Count; i++) { char quoted; if ((row.Table.Columns[i].DataType == Type.GetType("System.String")) || (row.Table.Columns[i].DataType == Type.GetType("System.DateTime"))) quoted = '\''; else quoted = ' '; string val = row[i].ToString(); if (row.Table.Columns[i].DataType == Type.GetType("System.Boolean")) val = (bool)row[i] ? "1" : "0"; bool isPrimaryKey = false; for (int j = 0; j < row.Table.PrimaryKey.Length; j++) { if (row.Table.PrimaryKey[j].ColumnName == row.Table.Columns[i].ColumnName) { if (whereClause != "") whereClause += " AND "; if (row[i] == DBNull.Value) whereClause += row.Table.Columns[i].ColumnName + "=NULL"; else whereClause += row.Table.Columns[i].ColumnName + "=" + quoted + val + quoted; isPrimaryKey = true; break; } } /* Only values for column that is not a primary key can be modified */ if (!isPrimaryKey) { if (setClause != "") setClause += ", "; if (row[i] == DBNull.Value) setClause += row.Table.Columns[i].ColumnName + "=NULL"; else setClause += row.Table.Columns[i].ColumnName + "=" + quoted + val + quoted; } } return new SqlCommand("UPDATE " + row.Table.TableName + " SET " + setClause + " WHERE " + whereClause, conn); } However, this is really slow when we have a lot of records. Is there a way to optimize this or an entirely different way to send lots of udpate/delete on several tables? I would really much like to use TSQL for this but can't figure a way to send a dataset to a regular sproc. Additional notes: We cannot directly access the SQLServer database. We tried without compression and it was slower.

    Read the article

  • Someone please help google create instuctions that windows users understand. googles "instructions"

    - by nathan
    Below are the only instructions i managed to find from google on how to install the android NDK, it is written as if we all run Linux and presumes we all understand what these obscure tools are. My comments and questions appear in Italics if somone who knows unix and windows would translate for google that would be great! Android NDK Installation Introduction: Please read docs/OVERVIEW.TXT to understand what the Android NDK is and is not. This file gives instructions on how to properly setup your NDK. I. Requirements: The Android NDK currently requires a Linux, OS X or Windows host operating system. Windows users will need to install Cygwin (http://www.cygwin.com) to use it. Note that running the NDK under MSys is not supported. You will need to have the Android SDK and its dependencies installed. The NDK cannot generate final application packages (.apk files), only the shared library files that can go into them. IMPORTANT: The Android NDK can only be used to target system images using the Cupcake (1.5) or later releases of the platform. This is due to subtle toolchain and ABI related changed that make it incompatible with 1.0 and 1.1 system images. The NDK requires GNU Make 3.81 or later being available on your development system. Earlier versions of GNU Make might work but have not been tested. You can check this by running 'make -v' from the command-line. The output should look like: GNU Make 3.81 Copyright (C) 2006 Free Software Foundation, Inc. ... On certain systems, GNU Make might be available through a different command like 'gmake' or 'gnumake'. For these systems, replace 'make' by the appropriate command when invoking the NDK build system as described in the documentation. Great some strange thing called gnu make.. if your not going to tell me what it does maybe you then at least you could give me a URL to it? The NDK also requires a Nawk or GNU Awk executable being available on your development system. Note that the original 'awk' program doesn't implement the 'match' and 'substr' functions used by the NDK build system. Ok another tool, with 1 of 2 possible names, but not the third... and again where should i download this?? On Windows, you will need to install a recent release of Cygwin to use the NDK. See http://www.cygwin.com for instructions. Woohoo a URL! download took about a day because these install instructions do not specify what parts to download. II. Preparing your installation prebuilt cross-toolchain binaries: After installing and unarchiving the NDK, you will need to run the following command from the root folder: build/host-setup.sh hello? windows dont run nothing but .exe .com or .dll, just tell me how you want me to run it.. This will test your setup and make sure the NDK can work properly. Nothing is said about where any of these things need to be installed to (what directory)

    Read the article

  • Linked list in C

    - by ScReYm0
    I am still new at lists in C and i got a big problem... First i wanna show you my code for inserting item to the list: void input_books_info(int number_of_books, BOOK *current) { int i; for(i = 0; i < number_of_books; i++) { while(current->next != NULL) current = current->next; current->next = (BOOK *)malloc(sizeof(BOOK)); printf_s("%d book catalog number: ", i + 1); scanf_s("%s", &current->next->catalog_number , 20); printf_s("%d book title: ", i + 1); scanf_s("%s", current->next->title ,80); printf_s("%d book author: ", i + 1); scanf_s("%s", current->next->author ,40); printf_s("%d book publisher: ", i+1); scanf_s("%s", current->next->publisher,80); printf_s("%d book price: ", i + 1); scanf_s("%f", &current->next->price, 5); printf_s("%d book year published: ", i + 1); scanf_s("%d", &current->next->year_published, 5); current->next->next = NULL; printf_s("\n\n"); } } And this is my main function: void main (void) { int number_of_books, t = 1; char book_catalog_number[STRMAX]; char book_title[STRMAX]; char book_author[STRMAX]; char reading_file[STRMAX]; char saving_file[STRMAX]; first = malloc(sizeof(BOOK)); first->next = NULL; /* printf_s("Enter file name: "); gets(saving_file); first->next = book_open(first, saving_file); */ while(t) { char m; printf_s("1. Input \n0. Exit \n\n"); printf_s("Choose operation: "); m = getch(); switch(m) { case '1': printf_s("\ninput number of books: "); scanf_s("%d", &number_of_books); input_books_info(number_of_books, first); printf_s("\n"); break; default: printf_s("\nNo entry found!\n\n\n\n\n"); break; } } } and last maybe here is the problem the printing function: void print_books_info(BOOK *current) { while(current->next != NULL && current != NULL) { printf_s("%s, ", current->next->catalog_number); printf_s("%s, ", current->author); printf_s("%s, ", current->next->title); printf_s("%s, ", current->next->author); printf_s("%s, ", current->next->publisher); printf_s("%.2f, ", current->next->price); printf_s("%d", current->next->year_published); printf_s("\n\n"); current = current->next; } } And my problem is that, when i run the app, program is moving good. But when I start the app, the program is storing only first input of data second and third are lost ... Can you help me to figure out it... ???

    Read the article

  • Error using Session in IIS7

    - by flashnik
    After deployment of my website to IIS I'm getting a following error message when trying to access session: Session state can only be used when enableSessionState is set to true, either in a configuration file or in the Page directive. Please also make sure that System.Web.SessionStateModule or a custom session state module is included in the \\ section in the application configuration. I access it in Page_Load or PreRender events (I tried both versions). With VS Dev Server it works without a problem. I tried both InProc an SessionState storage, 1 and multiple woker processes. I added a enableSessionState = "true" to my webpage explicitly. Here is part of web.config: <system.web> <globalization culture="ru-RU" uiCulture="ru-RU" /> <compilation debug="true" defaultLanguage="c#"> <assemblies> <add assembly="System.Core, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Data.DataSetExtensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add assembly="System.Xml.Linq, Version=3.5.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> <add assembly="System.Web.Extensions.Design, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add assembly="System.Design, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B03F5F7F11D50A3A" /> <add assembly="System.Windows.Forms, Version=2.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089" /> </assemblies> </compilation> <pages enableEventValidation="false" enableSessionState="true"> <controls> <add tagPrefix="asp" namespace="System.Web.UI" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add tagPrefix="asp" namespace="System.Web.UI.WebControls" assembly="System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> </controls> </pages> <httpHandlers> <remove verb="*" path="*.asmx" /> <add verb="*" path="*.asmx" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="*" path="*_AppService.axd" validate="false" type="System.Web.Script.Services.ScriptHandlerFactory, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add verb="GET,HEAD" path="ScriptResource.axd" type="System.Web.Handlers.ScriptResourceHandler, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" validate="false" /> </httpHandlers> <httpModules> <add name="ScriptModule" type="System.Web.Handlers.ScriptModule, System.Web.Extensions, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31BF3856AD364E35" /> <add name="SearchUrlRewriter" type="Synonymizer.SearchUrlRewriter, Synonymizer, Version=1.0.0.0, Culture=neutral" /> <add name="Session" type="System.Web.SessionStateModule" /> </httpModules> <sessionState cookieless="UseCookies" cookieName="My_SessionId" mode="InProc" stateNetworkTimeout="5" /> <customErrors mode="Off" /> </system.web> What else do I need to do to make it work?? UPD I tried to monitor if IIS accesses aspnet_client folder with ProcMon and didn't get any access.

    Read the article

  • C++ std::vector problems

    - by Faur Ioan-Aurel
    For 2 days i tried to explain myself some of the things that are happening in my c++ code,and i can't get a good explanation.I must say that i'm more a java programmer.Long time i used quite a bit the C language but i guess Java erased those skills and now i'm hitting a wall trying to port a few classes from java to c++. So let's say that we have this 2 classes: class ForwardNetwork { protected: ForwardLayer* inputLayer; ForwardLayer* outputLayer; vector<ForwardLayer* > layers; public: void ForwardNetwork::getLayers(std::vector< ForwardLayer* >& result ) { for(int i= 0 ;i< layers.size(); i++){ ForwardLayer* lay = dynamic_cast<ForwardLayer*>(this->layers.at(i)); if(lay != NULL) result.push_back(lay); else cout << "Layer at#" << i << " is null" << endl; } } void ForwardNetwork::addLayer ( ForwardLayer* layer ) { if(layer != NULL) cout << "Before push layer is not null" << endl; //setup the forward and back pointer if ( this->outputLayer != NULL ) { layer->setPrevious ( this->outputLayer ); this->outputLayer->setNext ( layer ); } //update the input layer and outputLayer variables if ( this->layers.size() == 0 ) this->inputLayer = this->outputLayer = layer; else this->outputLayer = layer; //push layer in vector this->layers.push_back ( layer ); for(int i = 0; i< layers.size();i++) if(layers[i] != NULL) cout << "Check::Layer[" << i << "] is not null!" << endl; } }; Second class: class Backpropagation : public Train { public: Backpropagation::Backpropagation ( FeedForwardNetwork* network ){ this->network = network; vector<FeedforwardLayer*> vec; network->getLayers(vec); } }; Now if i add from main() some layers into network via addLayer(..) method it's all good.My vector is just as it should.But after i call Backpropagation() constructor with a network object ,when i enter getLayers(), some of my objects from vector have their address set to NULL(they are randomly chosen:for example if i run my app once with 3 layer's into vector ,the first object from vector is null.If i run it second time first 2 objects are null,third time just first object null and so on). Now i can't explain why this is happening.I must say that all the objects that should be in vector they also live inside the network and they are not NULL; This happens everywhere after i done with addLayer() so not just in the getLayers(). I cant get a good grasp to this problem.I thought first that i might modify my vector.But i can't find such thing. Also why if the reference from vector is NULL ,the reference that lives inside ForwardNetwork as a linked list (inputLayer and outputLayer) is not NULL? I must ask for your help.Please ,if you have some advices don't hesitate! PS: as compiler i use g++ part of gcc 4.6.1 under ubuntu 11.10

    Read the article

  • NSUserDefaults loses 3 rows each time it's called

    - by Jeff Decker
    Hello Everyone! Brand new programmer here, so off-topic help/constructive criticism welcome. I am saving a default state (such as "New York") in a UIPickerView which is in a FlipSideView. It certainly saves for the first and second time I check to make sure it's the same state (I am clicking "done" and then "info" repeatedly), but on the third check the picker has moved up three states (to "New Hampshire") and then every time I check the picker progresses three more states. Here's the .h and .m files of the FlipSideViewController: #import <UIKit/UIKit.h> import "Calculator.h" @protocol FlipsideViewControllerDelegate; @interface FlipsideViewController : UIViewController { id delegate; UIPickerView *myPickerView; NSArray *pickerViewArray; } @property (nonatomic, assign) id delegate; @property (nonatomic, retain) UIPickerView *myPickerView; @property (nonatomic, retain) NSArray *pickerViewArray; (IBAction)done; @end @protocol FlipsideViewControllerDelegate - (void)flipsideViewControllerDidFinish:(FlipsideViewController *)controller; @end import "FlipsideViewController.h" @implementation FlipsideViewController @synthesize delegate; @synthesize myPickerView, pickerViewArray; -(CGRect)pickerFrameWithSize:(CGSize)size;{ CGRect screenRect = [[UIScreen mainScreen] applicationFrame]; CGRect pickerRect = CGRectMake( 0.0, screenRect.size.height - size.height, size.width, size.height); return pickerRect; } (void)viewDidLoad { [super viewDidLoad]; self.view.backgroundColor = [UIColor viewFlipsideBackgroundColor]; [self createPicker]; } -(void)viewWillAppear:(BOOL)animated;{ [super viewWillAppear:NO]; NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults]; [myPickerView selectRow:[defaults integerForKey:@"pickerRow"] inComponent:0 animated:NO]; } -(void)createPicker;{ pickerViewArray = [[NSArray arrayWithObjects: @"Alabama",@"Alaska", @"Arizona",@"Arkansas",@"California",@"Colorado",@"Connecticut",@"Delaware", @"District of Columbia",@"Florida",@"Georgia",@"Hawaii",@"Idaho",@"Illinois",@"Indiana",@"Iowa", @"Kansas",@"Kentucky",@"Louisiana",@"Maine",@"Maryland",@"Massachusetts",@"Michigan", @"Minnesota",@"Mississippi",@"Missouri",@"Montana",@"Nebraska",@"Nevada",@"New Hampshire",@"New Jersey", @"New Mexico",@"New York",@"North Carolina",@"North Dakota",@"Ohio",@"Oklahoma", @"Oregon",@"Pennsylvania",@"Rhode Island",@"South Carolina",@"South Dakota",@"Tennessee", @"Texas",@"Utah",@"Vermont",@"Virginia",@"Washington",@"West Virginia",@"Wisconsin",@"Wyoming", nil] retain]; myPickerView = [[UIPickerView alloc] initWithFrame:CGRectZero]; CGSize pickerSize = [myPickerView sizeThatFits:CGSizeZero]; myPickerView.frame = [self pickerFrameWithSize:pickerSize]; myPickerView.autoresizingMask = UIViewAutoresizingFlexibleWidth; myPickerView.showsSelectionIndicator = YES; myPickerView.delegate = self; myPickerView.dataSource = self; [self.view addSubview:myPickerView]; } (IBAction)done { [self.delegate flipsideViewControllerDidFinish:self]; } pragma mark - pragma mark UIPickerViewDataSource (NSString *)pickerView:(UIPickerView *)pickerView titleForRow:(NSInteger)row forComponent:(NSInteger)component { NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults]; [defaults setInteger:row forKey:@"pickerRow"]; [defaults setObject:[pickerViewArray objectAtIndex:row] forKey:@"pickerString"]; return [pickerViewArray objectAtIndex:row]; } (void)pickerView:(UIPickerView *)pickerView didSelectRow:(NSInteger)row inComponent:(NSInteger)component { NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults]; [defaults setInteger:row forKey:@"pickerRow"]; [defaults setObject:[pickerViewArray objectAtIndex:row] forKey:@"pickerString"]; } (CGFloat)pickerView:(UIPickerView *)pickerView widthForComponent:(NSInteger)component { return 240.0; } (CGFloat)pickerView:(UIPickerView *)pickerView rowHeightForComponent:(NSInteger)component { return 40.0; } (NSInteger)pickerView:(UIPickerView *)pickerView numberOfRowsInComponent:(NSInteger)component { return [pickerViewArray count]; } (NSInteger)numberOfComponentsInPickerView:(UIPickerView *)pickerView { return 1; } call me mystified! Thanks for any help. Please let me know if I can make myself more clear...

    Read the article

  • Javascript Closures - What are the negatives?

    - by vol7ron
    Question: There seem to be many benefits to Closures, but what are the negatives (memory leakage? obfuscation problems? bandwidth increasage?)? Additionally, is my understanding of Closures correct? Finally, once closures are created, can they be destroyed? I've been reading a little bit about Javascript Closures. I hope someone a little more knowledgeable will guide my assertions, correcting me where wrong. Benefits of Closures: Encapsulate the variables to a local scope, by using an internal function. The anonymity of the function is insignificant. What I've found helpful is to do some basic testing, regarding local/global scope: <script type="text/javascript"> var global_text = ""; var global_count = 0; var global_num1 = 10; var global_num2 = 20; var global_num3 = 30; function outerFunc() { var local_count = local_count || 0; alert("global_num1: " + global_num1); // global_num1: undefined var global_num1 = global_num1 || 0; alert("global_num1: " + global_num1); // global_num1: 0 alert("global_num2: " + global_num2); // global_num2: 20 global_num2 = global_num2 || 0; // (notice) no definition with 'var' alert("global_num2: " + global_num2); // global_num2: 20 global_num2 = 0; alert("local_count: " + local_count); // local_count: 0 function output() { global_num3++; alert("local_count: " + local_count + "\n" + "global_count: " + global_count + "\n" + "global_text: " + global_text ); local_count++; } local_count++; global_count++; return output; } var myFunc = outerFunc(); myFunc(); /* Outputs: ********************** * local_count: 1 * global_count: 1 * global_text: **********************/ global_text = "global"; myFunc(); /* Outputs: ********************** * local_count: 2 * global_count: 1 * global_text: global **********************/ var local_count = 100; myFunc(); /* Outputs: ********************** * local_count: 3 * global_count: 1 * global_text: global **********************/ alert("global_num1: " + global_num1); // global_num1: 10 alert("global_num2: " + global_num2); // global_num2: 0 alert("global_num3: " + global_num3); // global_num3: 33 </script> Interesting things I took out of it: The alerts in outerFunc are only called once, which is when the outerFunc call is assigned to myFunc (myFunc = outerFunc()). This assignment seems to keep the outerFunc open, in what I would like to call a persistent state. Everytime myFunc is called, the return is executed. In this case, the return is the internal function. Something really interesting is the localization that occurs when defining local variables. Notice the difference in the first alert between global_num1 and global_num2, even before the variable is trying to be created, global_num1 is considered undefined because the 'var' was used to signify a local variable to that function. -- This has been talked about before, in the order of operation for the Javascript engine, it's just nice to see this put to work. Globals can still be used, but local variables will override them. Notice before the third myFunc call, a global variable called local_count is created, but it as no effect on the internal function, which has a variable that goes by the same name. Conversely, each function call has the ability to modify global variables, as noticed by global_var3. Post Thoughts: Even though the code is straightforward, it is cluttered by alerts for you guys, so you can plug and play. I know there are other examples of closures, many of which use anonymous functions in combination with looping structures, but I think this is good for a 101-starter course to see the effects. The one thing I'm concerned with is the negative impact closures will have on memory. Because it keeps the function environment open, it is also keeping those variables stored in memory, which may/may not have performance implications, especially regarding DOM traversals and garbage collection. I'm also not sure what kind of role this will play in terms of memory leakage and I'm not sure if the closure can be removed from memory by a simple "delete myFunc;." Hope this helps someone, vol7ron

    Read the article

  • sshd running but no PID file

    - by dunxd
    I'm recently started using monit to monitor the status of sshd on my CentOS 5.4 server. This works fine, but every so often monit reports that sshd is no longer running. This isn't true - I am still able to login to the server via ssh, however I note the following: There is no longer any PID file at /var/run/sshd.pid - after a reboot this file exists. Once it is gone, restarting sshd via service sshd restart does not create the PID file. sudo service sshd status reports openssh-daemon is stopped - again, restarting sshd does not change this, but a reboot does. sudo service sshd stop reports failed, presumably because of the missing PID file. Any idea what is going on? Update sudo netstat -lptun gives the following output relating to port 22 tcp 0 0 :::22 :::* LISTEN 20735/sshd Killing the process with this PID as suggested by @Henry and then starting sshd via service results in service sshd status recognising the process by PID again. Would still like to understand this better. RPM verify suggested by a couple of answerers shows this: sudo rpm -vV openssh openssh-server openssh-clients | grep 'S\.5' S.5....T c /etc/pam.d/sshd S.5....T c /etc/ssh/sshd_config /etc/pam.d/sshd has the following contents: #%PAM-1.0 auth include system-auth account required pam_nologin.so account include system-auth password include system-auth session optional pam_keyinit.so force revoke session include system-auth #session required pam_loginuid.so Should that last line be commented out? Update Here's the output of @YannickGirouard 's script: $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 21330 Command line for PID 21330: /usr/sbin/sshd Listing process(es) relating to PID 21330: UID PID PPID C STIME TTY TIME CMD root 21330 1 0 14:04 ? 00:00:00 /usr/sbin/sshd Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ However, I've since got things working by killing the process and starting afresh, as suggested by @Henry below, so perhaps I am no longer seeing the same thing. Will try again if I am seeing the issue again after next reboot. Update - 14 March Monit alerted me that sshd had disappeared, and again I am able to ssh onto the server. So now I can run the script $ sudo ./sshd_test Searching for the process listening on port 22... Found the following PID: 2208 Command line for PID 2208: /usr/sbin/sshd Listing process(es) relating to PID 2208: UID PID PPID C STIME TTY TIME CMD root 2208 1 0 Mar13 ? 00:00:00 /usr/sbin/sshd root 1885 2208 0 21:50 ? 00:00:00 sshd: dunx [priv] Listing RPM information about openssh packages: Name : openssh Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:50:57 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 745390 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH implementation of SSH protocol versions 1 and 2 ------------------------------------------------------ Name : openssh-clients Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : Applications/Internet Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 871132 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH client applications ------------------------------------------------------ Name : openssh-server Relocations: (not relocatable) Version : 4.3p2 Vendor: CentOS Release : 72.el5_7.5 Build Date: Tue 30 Aug 2011 12:34:14 AM BST Install Date: Sun 06 Nov 2011 12:51:04 AM GMT Build Host: builder10.centos.org Group : System Environment/Daemons Source RPM: openssh-4.3p2-72.el5_7.5.src.rpm Size : 492478 License: BSD Signature : DSA/SHA1, Fri 02 Sep 2011 01:13:01 AM BST, Key ID a8a447dce8562897 URL : http://www.openssh.com/portable.html Summary : The OpenSSH server daemon ------------------------------------------------------ Again, when I look for /var/run/sshd.pid I don't find it. $ cat /var/run/sshd.pid cat: /var/run/sshd.pid: No such file or directory $ sudo netstat -anp | grep sshd tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 2208/sshd $ sudo kill 2208 $ sudo service sshd start Starting sshd: [ OK ] $ cat /var/run/sshd.pid 3794 $ sudo service sshd status openssh-daemon (pid 3794) is running... Is it possible that sshd is restarting and not creating a pidfile for some reason?

    Read the article

< Previous Page | 413 414 415 416 417 418 419 420 421 422 423 424  | Next Page >