Search Results

Search found 14539 results on 582 pages for 'date conversion'.

Page 42/582 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • linearRGB conversion to/from HSL

    - by Otaku
    Does anyone know of a way to get HSL from an linearRGB color (not an sRGB color)? I've seen a lot of sRGB<-HSL conversions, but nothing for linearRGB<-HSL. Not sure if it is fundementally the same conversion with minor tweaks, but I'd appreciate any insight someone may have on this. Linear RGB is not the same as linearizing sRGB (which is taking [0,255] and making it [0,1]). Linear RGB transformation from/to sRGB is at http://en.wikipedia.org/wiki/SRGB. In VBA, this would be expressed (taking in linearized sRGB values [0,1]): Public Function sRGB_to_linearRGB(value As Double) If value < 0# Then sRGB_to_linearRGB = 0# Exit Function End If If value <= 0.04045 Then sRGB_to_linearRGB = value / 12.92 Exit Function End If If value <= 1# Then sRGB_to_linearRGB = ((value + 0.055) / 1.055) ^ 2.4 Exit Function End If sRGB_to_linearRGB = 1# End Function Public Function linearRGB_to_sRGB(value As Double) If value < 0# Then linearRGB_to_sRGB = 0# Exit Function End If If value <= 0.0031308 Then linearRGB_to_sRGB = value * 12.92 Exit Function End If If value < 1# Then linearRGB_to_sRGB = 1.055 * (value ^ (1# / 2.4)) - 0.055 Exit Function End If linearRGB_to_sRGB = 1# End Function I have tried sending in Linear RGB values to standard RGB_to_HSL routines and back out from HSL_to_RGB, but it does not work. I have seen almost no references that this can be done, except for two: A reference on http://en.wikipedia.org/wiki/HSL_and_HSV#cite_note-9 (numbered item 10). A reference on an open source project Grafx2 @ http://code.google.com/p/grafx2/issues/detail?id=63#c22 in which the contributor states that he has done Linear RGB <- HSL conversion and provides some C code in an attachment to his comment in a .diff file (which I can't really read :( ) My intent is to send from sRGB (for example, FF99FF (R=255, G=153, B=255)) to Linear RGB (R=1.0, G=0.318546778125092, B=1.0) using the code above (for example, the G=153 would be obtained in Linear RGB from sRGB_to_linearRGB(153 / 255)) to HSL, modify the Saturation by 350% and going back from HSL-Linear RGB-sRGB, the result would be FF19FF (R=255, G=25, B=255). Using available functions from .NET, such as .getHue from a System.Drawing.Color does not work in any sRGB space above 100% modulation of any HSL value, hence the need for Linear RGB to be sent in instead of sRGB.

    Read the article

  • Use date operations on a computed field filter in a view

    - by stephenhay
    I'd like to expose a filter in Views based on a Computed Field. This field should utilize the date operation "less than". Apparently, a date type is not available to computed field (varchar is). However, using varchar results in views treating the field as a string rather than as a date, without the operation I'm looking for. So I tried using a timestamp instead of a date, which allowed me to use an integer data type. The exposed view gives me a "less than" operation, but as it's still not a date, the user must type in a timestamp. Not handy. So I'm thinking the best way to do this is to create a new (hidden) CCK field which is a date field, and set the value of this field to the value of the Computed Field. I can then use the new CCK field for my exposed filter. But I'm not getting anywhere with this, as I'm unsure how to set another CCK field with a Computed Field. To return the value to the computed field itself, I'm using the standard: $node_field[0]['value'] = $newestdate; I would like to set the value of the new CCK field to $newestdate as well. Can anyone help?

    Read the article

  • Adding date to multiple fields via datepicker

    - by Andy
    i have a form in drupal with jquery based date module. there are multiple fields with date picker enabled. i want to set the value of all of them (they all have class .date-popup-init) to the value of the first field (#edit-field, the 'from' date) when that field is set. my code so far: <script type="text/javascript"> var DatePicked = function() { var firstdate = $("#edit-field"); var updater = firstdate.datepicker("getDate"); $(".date-popup-init").each(function(){ $(this).datepicker("setDate", updater); }); } $(function() { $("#edit-field").datepicker({ onSelect: DatePicked }); }); </script> this seems to randomly work; it sets the date of some fields to the value of #edit-field, seemingly different fields each time. also, the form adds more datepicker-enabled fields via ajax. is there any way to ensure that all these new fields, when they load, pick up the value of #edit-field as well? disclaimer: last night was my first attempt at javascript of any kind. i have a basic idea now. the above was cobbled through countless google examples.

    Read the article

  • how to find by date from timestamp column in JPA criteria

    - by Kre Toni
    I want to find a record by date. In entity and database table datatype is timestamp. I used Oracle database. @Entity public class Request implements Serializable { @Id private String id; @Version private long version; @Temporal(TemporalType.TIMESTAMP) @Column(name = "CREATION_DATE") private Date creationDate; public Request() { } public Request(String id, Date creationDate) { setId(id); setCreationDate(creationDate); } public String getId() { return id; } public void setId(String id) { this.id = id; } public long getVersion() { return version; } public void setVersion(long version) { this.version = version; } public Date getCreationDate() { return creationDate; } public void setCreationDate(Date creationDate) { this.creationDate = creationDate; } } in mian method public static void main(String[] args) { RequestTestCase requestTestCase = new RequestTestCase(); EntityManager em = Persistence.createEntityManagerFactory("Criteria").createEntityManager(); em.getTransaction().begin(); em.persist(new Request("005",new Date())); em.getTransaction().commit(); Query q = em.createQuery("SELECT r FROM Request r WHERE r.creationDate = :creationDate",Request.class); q.setParameter("creationDate",new GregorianCalendar(2012,12,5).getTime()); Request r = (Request)q.getSingleResult(); System.out.println(r.getCreationDate()); } in oracle database record is ID CREATION_DATE VERSION 006 05-DEC-12 05.34.39.200000 PM 1 Exception is Exception in thread "main" javax.persistence.NoResultException: getSingleResult() did not retrieve any entities. at org.eclipse.persistence.internal.jpa.EJBQueryImpl.throwNoResultException(EJBQueryImpl.java:1246) at org.eclipse.persistence.internal.jpa.EJBQueryImpl.getSingleResult(EJBQueryImpl.java:750) at com.ktrsn.RequestTestCase.main(RequestTestCase.java:29)

    Read the article

  • Java calendar getting weekdays not working

    - by Raptrex
    I am trying to get this to output all the weekdays (MON-FRI) between 5/16/2010 (a sunday) and 5/25/2010 (a tuesday). The correct output should be 17,18,19,20,21,24,25. However, the result im getting is 17,18,19,20,21,17,18,19. The other methods just split up the string the date is in import java.util.*; public class test { public static void main(String[] args) { String startTime = "5/16/2010 11:44 AM"; String endTime = "5/25/2010 12:00 PM"; GregorianCalendar startCal = new GregorianCalendar(); startCal.setLenient(true); String[] start = splitString(startTime); //this sets year, month day startCal.set(Integer.parseInt(start[2]),Integer.parseInt(start[0])-1,Integer.parseInt(start[1])); startCal.set(GregorianCalendar.HOUR, Integer.parseInt(start[3])); startCal.set(GregorianCalendar.MINUTE, Integer.parseInt(start[4])); if (start[5].equalsIgnoreCase("AM")) { startCal.set(GregorianCalendar.AM_PM, 0); } else { startCal.set(GregorianCalendar.AM_PM, 1); } GregorianCalendar endCal = new GregorianCalendar(); endCal.setLenient(true); String[] end = splitString(endTime); endCal.set(Integer.parseInt(end[2]),Integer.parseInt(end[0])-1,Integer.parseInt(end[1])); endCal.set(GregorianCalendar.HOUR, Integer.parseInt(end[3])); endCal.set(GregorianCalendar.MINUTE, Integer.parseInt(end[4])); if (end[5].equalsIgnoreCase("AM")) { endCal.set(GregorianCalendar.AM_PM, 0); } else { endCal.set(GregorianCalendar.AM_PM, 1); } for (int i = startCal.get(Calendar.DATE); i < endCal.get(Calendar.DATE); i++) { startCal.set(Calendar.DATE, i); startCal.set(Calendar.DAY_OF_WEEK, i); if (startCal.get(Calendar.DAY_OF_WEEK) == Calendar.MONDAY || startCal.get(Calendar.DAY_OF_WEEK) == Calendar.TUESDAY || startCal.get(Calendar.DAY_OF_WEEK) == Calendar.WEDNESDAY || startCal.get(Calendar.DAY_OF_WEEK) == Calendar.THURSDAY || startCal.get(Calendar.DAY_OF_WEEK) == Calendar.FRIDAY) { System.out.println("\t" + startCal.get(Calendar.DATE)); } } } private static String[] splitDate(String date) { String[] temp1 = date.split(" "); // split by space String[] temp2 = temp1[0].split("/"); // split by / //5/21/2010 10:00 AM return temp2; // return 5 21 2010 in one array } private static String[] splitTime(String date) { String[] temp1 = date.split(" "); // split by space String[] temp2 = temp1[1].split(":"); // split by : //5/21/2010 10:00 AM String[] temp3 = {temp2[0], temp2[1], temp1[2]}; return temp3; // return 10 00 AM in one array } private static String[] splitString(String date) { String[] temp1 = splitDate(date); String[] temp2 = splitTime(date); String[] temp3 = new String[6]; return dateFill(temp3, temp2[0], temp2[1], temp2[2], temp1[0], temp1[1], temp1[2]); } private static String[] dateFill(String[] date, String hours, String minutes, String ampm, String month, String day, String year) { date[0] = month; date[1] = day; date[2] = year; date[3] = hours; date[4] = minutes; date[5] = ampm; return date; } private String dateString(String[] date) { //return month+" "+day+", "+year+" "+hours+":"+minutes+" "+ampm //5/21/2010 10:00 AM return date[3]+"/"+date[4]+"/ "+date[5]+" "+date[0]+":"+date[1]+" "+date[2]; } }

    Read the article

  • org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

    - by lawlist
    Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

    Read the article

  • Avoid implicit conversion from date to timestamp for selects with Oracle 11g using Hibernate

    - by sapporo
    I'm using Hibernate 3.2.1 criteria queries to select rows from an Oracle 11g database, filtering by a timestamp field. The field in question is of type java.util.Date in Java, and DATE in Oracle. It turns out that the field gets mapped to java.sql.Timestamp, and Oracle converts all rows to TIMESTAMP before comparing to the passed in value, bypassing the index and thereby ruining performance. One solution would be to use Hibernate's sqlRestriction() along with Oracle's TO_DATE function. That would fix performance, but requires rewriting the application code (lots of queries). So is there a more elegant solution? Since Hibernate already does type mapping, could it be configured to do the right thing?

    Read the article

  • Optimize date query for large child tables: GiST or GIN?

    - by Dave Jarvis
    Problem 72 child tables, each having a year index and a station index, are defined as follows: CREATE TABLE climate.measurement_12_013 ( -- Inherited from table climate.measurement_12_013: id bigint NOT NULL DEFAULT nextval('climate.measurement_id_seq'::regclass), -- Inherited from table climate.measurement_12_013: station_id integer NOT NULL, -- Inherited from table climate.measurement_12_013: taken date NOT NULL, -- Inherited from table climate.measurement_12_013: amount numeric(8,2) NOT NULL, -- Inherited from table climate.measurement_12_013: category_id smallint NOT NULL, -- Inherited from table climate.measurement_12_013: flag character varying(1) NOT NULL DEFAULT ' '::character varying, CONSTRAINT measurement_12_013_category_id_check CHECK (category_id = 7), CONSTRAINT measurement_12_013_taken_check CHECK (date_part('month'::text, taken)::integer = 12) ) INHERITS (climate.measurement) CREATE INDEX measurement_12_013_s_idx ON climate.measurement_12_013 USING btree (station_id); CREATE INDEX measurement_12_013_y_idx ON climate.measurement_12_013 USING btree (date_part('year'::text, taken)); (Foreign key constraints to be added later.) The following query runs abysmally slow due to a full table scan: SELECT count(1) AS measurements, avg(m.amount) AS amount FROM climate.measurement m WHERE m.station_id IN ( SELECT s.id FROM climate.station s, climate.city c WHERE -- For one city ... -- c.id = 5182 AND -- Where stations are within an elevation range ... -- s.elevation BETWEEN 0 AND 3000 AND 6371.009 * SQRT( POW(RADIANS(c.latitude_decimal - s.latitude_decimal), 2) + (COS(RADIANS(c.latitude_decimal + s.latitude_decimal) / 2) * POW(RADIANS(c.longitude_decimal - s.longitude_decimal), 2)) ) <= 50 ) AND -- -- Begin extracting the data from the database. -- -- The data before 1900 is shaky; insufficient after 2009. -- extract( YEAR FROM m.taken ) BETWEEN 1900 AND 2009 AND -- Whittled down by category ... -- m.category_id = 1 AND m.taken BETWEEN -- Start date. (extract( YEAR FROM m.taken )||'-01-01')::date AND -- End date. Calculated by checking to see if the end date wraps -- into the next year. If it does, then add 1 to the current year. -- (cast(extract( YEAR FROM m.taken ) + greatest( -1 * sign( (extract( YEAR FROM m.taken )||'-12-31')::date - (extract( YEAR FROM m.taken )||'-01-01')::date ), 0 ) AS text)||'-12-31')::date GROUP BY extract( YEAR FROM m.taken ) The sluggishness comes from this part of the query: m.taken BETWEEN /* Start date. */ (extract( YEAR FROM m.taken )||'-01-01')::date AND /* End date. Calculated by checking to see if the end date wraps into the next year. If it does, then add 1 to the current year. */ (cast(extract( YEAR FROM m.taken ) + greatest( -1 * sign( (extract( YEAR FROM m.taken )||'-12-31')::date - (extract( YEAR FROM m.taken )||'-01-01')::date ), 0 ) AS text)||'-12-31')::date The HashAggregate from the plan shows a cost of 10006220141.11, which is, I suspect, on the astronomically huge side. There is a full table scan on the measurement table (itself having neither data nor indexes) being performed. The table aggregates 237 million rows from its child tables. Question What is the proper way to index the dates to avoid full table scans? Options I have considered: GIN GiST Rewrite the WHERE clause Separate year_taken, month_taken, and day_taken columns to the tables What are your thoughts? Thank you!

    Read the article

  • Avoid implicit conversion from date to timestamp for selects with Oracle using Hibernate

    - by sapporo
    I'm using Hibernate 3.2.7.GA criteria queries to select rows from an Oracle Enterprise Edition 10.2.0.4.0 database, filtering by a timestamp field. The field in question is of type java.util.Date in Java, and DATE in Oracle. It turns out that the field gets mapped to java.sql.Timestamp, and Oracle converts all rows to TIMESTAMP before comparing to the passed in value, bypassing the index and thereby ruining performance. One solution would be to use Hibernate's sqlRestriction() along with Oracle's TO_DATE function. That would fix performance, but requires rewriting the application code (lots of queries). So is there a more elegant solution? Since Hibernate already does type mapping, could it be configured to do the right thing? Update: The problem occurs in a variety of configurations, but here's one specific example: Oracle Enterprise Edition 10.2.0.4.0 Oracle JDBC Driver 11.1.0.7.0 Hibernate 3.2.7.GA Hibernate's Oracle10gDialect Java 1.6.0_16

    Read the article

  • SQl rows to columns conversion

    - by Thihara
    Hi, I have a table ClassAttendance and I'm using MSSQL 2005 studentID--attendanceDate---------------------------------------status 1004--------2010-03-17--------------------------------------------------0 1005--------2010-03-17--------------------------------------------------1 1006--------2010-03-17--------------------------------------------------0 1007--------2010-03-17--------------------------------------------------0 1004--------2010-03-19--------------------------------------------------0 1005--------2010-03-19--------------------------------------------------1 1006--------2010-03-19--------------------------------------------------0 1007--------2010-03-19--------------------------------------------------0 1004--------2010-03-20--------------------------------------------------1 as you can see studentID is a foreign Key for a table called StudentData and attendedDate has an unknown number of rows. Can i get the output like below by using a query? I need the dates in one month to be columns and the value of the date columns will be values in the status column. The number of date records per studentID is the same its the number of dates in the attendanceDate filed that is unknown. studentID---------2010-03-17--------2010-03-19------2010-03-20 1004-----------------------------0----------------------0--------------------1 etc. This is for a creating a report so I need to do it in a query. Please help if you can.

    Read the article

  • PHP - Short hand if statement with a date format with weird output.

    - by McNabbToSkins
    I am using a short hand notation of an if statement to format a field. If the field is an empty string I leave it as an empty string, if not then I am trying to format it to a proper datetime format so it can be inserted into a mysql db. here is my php code $date = ($date == '') ? date("Y-m-d", strtotime($date)) : $date; for some reason when the $date string is not empty it is returning it int he format 'm/d/Y' example: 04/01/2010 When I pull the code out of the shorthand if $date = date("Y-m-d", strtotime($date)); print($date); it is formatted correctly like this 'Y-m-d' or 2010-04-01. Does anyone know why this happens? Thanks

    Read the article

  • JQuery Datepicker Date highlight Issue

    - by Isola Olufemi
    I have an in-line date picker in which I want to highlight some dates based on array of strings from the server side. I found out the on load of the page with the datepicker, events the matches in the current month will not be highlighted. when I click the next month button the events on the next moth will be highlighted. What I discovered that i the matching only get highlighted when I click to the next month and not when I click back to the previous month. Below is my script: var actionCalDates = new Array(); function getDates(month, year) { $.ajax({ url: "/Index/GetAllAlerts", data: { month: month, year: year }, success: function (result) { var date = new Date(); var i = new Number(date.getMonth()); i += 1; actionCalDates = result.split(","); } }); } function getTitle(ar, d) { var result = ""; for (var i = 0; i < ar.length; i++) { if (ar[i].indexOf(d) != -1) { var e = actionCalDates[i].split(";"); result += e[0] + "\n"; } } return result; } $('#calendar').datepicker({ numberOfMonths: [1, 1], showCurrentAtPos: 0, dateFormat: 'dd/mm/y', beforeShowDay: function (thedate) { var theday = thedate.getDate(); var x = new Number(thedate.getMonth()); x += 1; var date = thedate.getDate() + "/" + x + "/" + thedate.getFullYear(); getDates(x, thedate.getFullYear()); for (var i = 0; i < actionCalDates.length; i++) { var entry = actionCalDates[i].split(";"); if (date == entry[1]) { return [true, "highlight", getTitle(actionCalDates, date)]; } } return [true, "", ""]; }, onChangeMonthYear: function (year, month, inst) { getDates(month, year); }, onSelect: function (d, instance) { $.ajax({ url: '/Index/AlertConvertDate', datatype: 'text', data: { dateString: d }, error: function (xhr, ajaxOptions, thrownError) { alert(xhr.statusText); alert(thrownError); }, success: function (data) { window.SetHomeContent(data); } }); } }); Please can someone point out where I went wrong? Thank you all.

    Read the article

  • How do I `SUM` by multiple columns in Excel

    - by dwwilson66
    I have a comma delimited file that includes two columns date/time (which imports as Excel's mm/dd/yyyy hh:mm custom format) and status of 1 or 0. The status represents a piece of equipment either being on or off. I'm trying to generate a graph that will show, hours up vs. down by day. CONSIDER: 1/1/2012 00:00, 1 1/1/2012 03:00, 0 1/1/2012 14:00, 1 1/3/2012 00:00, 0 This tells me that the equipment was up for three hours, down for eleven hours, and then up for thirty-four hours (across two calendar days). However, I would like to generate a graph that shows how many hours PER DAY we were up or down. CONSIDER: 1/1 XXXXXXXXXXXXX----------- (up 13, down 11) 1/2 XXXXXXXXXXXXXXXXXXXXXXXX (up 24) To me, it seems that I need to generate a dataset summing HOURS by STATUS by CALENDAR DAY...but I can't seem to find a flavor of pivot table or nested SUM(IF(SUMIF(...))) combination to make it work. Most troubling is accounting for date changes...in my example above, since my uptime starting at 14:00 on 1/1/2012 crosses midnight, I need to know that 10 uptime hours get totalled with 1/1/2012 and 24 uptime hours get totalled with 1/2/2012. I may be able to do something with a calendar list to drive the date summation, but then I need a way to compare 01/01/2012 to 01/01/2012 03:00 as equal. There's got to be a way along the lines of if(INTEGER-PORTIONS-OF-SERIAL-DATES-ARE-EQUAL,TOTAL-HOURS-IF-VALUE-IS_1,0) but nothing's worked so far. Any suggestions? I've been battling this most of the day, and need a fresh perspective. Thanks

    Read the article

  • ms excel 2010 in windows xp - when open workbook the data is formatted differently than when i saved it

    - by Justin
    I haven't been able to find an answer to this. I have multiple files that I use regularly in excel that now have cell formats of "date". Every single cell in the entire workbook (all sheets) is now formatted as "date". The problem is that I lost my formatting for percents, numbers years, etc and now everything is converted to date (xx/xx/xxxx). I am able to open previously saved versions of a file (prior to me having the problem) and the cells are formatted as I intend them to be (percents, numbers, general, as well as dates). Since this has happened on a couple different files recently, I am wondering how this is happening and how do I prevent it from happening in the future. I cannot cure the problem just by highlighting the entire sheet and converting back to general because I lose all my percents and number formatting. Example (Correct formatting): Month Year Working Days MTD POS Curr Rem May 2012 22 0 1,553,549 June 2012 22 0 1,516,903 June 2011 22 0 1,555,512 June 2010 22 0 1,584,704 Example (Incorrect formatting): Month Year Working Days MTD POS Curr Rem June Tuesday, July 04, 1905 Wednesday, January 04, 1900 Wednesday, January 18, 1900 213,320 July Tuesday, July 04, 1905 Wednesday, January 04, 1900 Monday, January 16, 1900 314,261 July Monday, July 03, 1905 Wednesday, January 04, 1900 Sunday, January 15, 1900 447,759 July Sunday, July 02, 1905 Wednesday, January 04, 1900 Monday, January 16, 1900 321,952 Sorry for the mess. Any suggestions?

    Read the article

  • How does one convert 16-bit RGB565 to 24-bit RGB888?

    - by jleedev
    I’ve got my hands on a 16-bit rgb565 image (specifically, an Android framebuffer dump), and I would like to convert it to 24-bit rgb888 for viewing on a normal monitor. The question is, how does one convert a 5- or 6-bit channel to 8 bits? The obvious answer is to shift it. I started out by writing this: uint16_t buf; while (read(0, &buf, sizeof buf)) { unsigned char red = (buf & 0xf800) >> 11; unsigned char green = (buf & 0x07c0) >> 5; unsigned char blue = buf & 0x003f; putchar(red << 3); putchar(green << 2); putchar(blue << 3); } However, this doesn’t have one property I would like, which is for 0xffff to map to 0xffffff, instead of 0xf8fcf8. I need to expand the value in some way, but I’m not sure how that should work. The Android SDK comes with a tool called ddms (Dalvik Debug Monitor) that takes screen captures. As far as I can tell from reading the code, it implements the same logic; yet its screenshots are coming out different, and white is mapping to white. Here’s the raw framebuffer, the smart conversion by ddms, and the dumb conversion by the above algorithm. (By the way, this conversion is implemented in ffmpeg, but it’s just performing the dumb conversion listed above, leaving the LSBs at all zero.) I guess I have two questions: What’s the most sensible way to convert rgb565 to rgb888? How is DDMS converting its screenshots?

    Read the article

  • Silverlight 5 Hosting :: Features in Silverlight 5 and Release Date

    - by mbridge
    Silverlight 5 is finally announced in the Silverlight FireStarter Event on the 2nd December, 2010. This new version of Silverlight which was earlier labeled as 'Future of Microsoft Silverlight' has now come much closer to go live as the first Silverlight 5 Beta version is expected to be shipped during the early months of 2011. However for the full fledged and the final release of Silverlight 5, we have to wait many more months as the same is likely to be made available within the Q3 2011. As would have been usually expected, this latest edition would feature many new capabilities thereby extending the developer productivity to a whole new dimension of premium media experience and feature-rich business applications. It comes along with many new feature updates as well as the inclusion of new technologies to improve the standard of the Silverlight applications which are now fine-tuned to produce next generation business and media solutions that is capable to meet the requirements of the advanced web-based app development. The Silverlight 5 is all set to replace the previous fourth version which now includes more than forty new features while also dropping various deprecated elements that was prevalent earlier. It has brought around some major performance enhancements and also included better support for various other tools and technologies. Following are some of the changes that are registered to be available under the Silverlight 5 Beta edition which is scheduled to be launched during the Q1 2011. Silverlight 5 : Premium Media Experiences The media features of Silverlight 5 has seen some major enhancements with a lot of optimizations being made to deliver richer solutions. It's capability has now been extended to make things easier, faster and capable of performing the desired tasks in the most efficient manner. The Silverlight media solutions has already been a part of many companies in the recent days where various on-demand Silverlight services were featured but with the arrival of the next generation premium media solution of Silverlight 5, it is expected to register new heights of success and global user acclamation for using it with many esteemed web-based projects and media solutions. - The most happening element in the new Silverlight 5 will be its support for utilizing the GPU based hardware acceleration which is intended to lower down the CPU load to a significant extent and thereby allowing faster rendering of media contents without consuming much resources. This feature is believed to be particularly helpful for low configured machines to run full HD media content without any lagging caused due to processor load. It will hence be one great feature to revolutionize the new generation high quality media contents to be available within the web in a more efficient manner with its hardware decoded video playback capabilities. - With the inclusion of hardware video decoding to minimize the processor load, the Silverlight 5 also comes with another optimization enhancement to also reduce the power consumption level by making new methods to deal with the power-saver settings. With this optimization in effect, the computer would be automatically allowed to switch to sleep mode while no video playback is in progress and also to prevent any screensavers to popup and cause annoyances during any video playback. There would also be other power saver options which will be made available to best suit the users requirements and purpose. - The Silverlight trickplay feature is another great way to tweak any silverlight powered media content as is used for many video tutorial sites or for dealing with any sort of presentations. This feature enables the user to modify the playback speed to either slowdown or speedup during the playback durations based on the requirements without compromising on the quality of output. Normally such manipulations always makes the content's audio to go off-pitch, but the same will not be the case with TrickPlay and the audio would seamlessly progress with the video without skipping any of its part. - In addition to all of the above, the new Silverlight 5 will be featuring wireless control of all the media contents by making use of remote controllers. With the use of such remote devices, it will be easier to handle the various media playback controls thereby providing more freedom while experiencing the premium media services. Silverlight 5 : Business Application Development The application development standard has been extended with more possibilities by bringing forth new and useful technologies and also reviving the existing methods to work better than what it was used to. From the UI improvements to advanced technical aspects, the Silverlight 5 scores high on all grounds to produce great next generation business delivered applications by putting in more creativity and resourceful touch to all the apps being produced with it. - The WPF feature of Silverlight is made more effective by introducing new standards of Databinding which is intended to improve the productivity standards of the Silverlight application developer. It brings in a lot of convenience in debugging the databinding components or expressions and hence making things work in a flawless manner. Some additional features related to databinding includes that of Ancestor RelativeSource, Implicit DataTemplates and Model View ViewModel (MVVM) support with DataContextChanged event and many other new features relating it. - It now comes with a refined text and printing service which facilitates better clarity of the text rendering and also many positive changes which are being applied to the layout pattern. New supports has been added to include OpenType font, multi-column text, linked-text containers and character leading support to name a few among the available features.This also includes some important printing aspects like that of Postscript Vector Printing API which allows to program our printing tasks in a user defined way and Pivot functionality for visualization concerns of informations. - The Graphics support is the key improvements being incorporated which now enables to utilize three dimensional graphics pattern using GPU acceleration. It can manage to provide some really cool visualizations being curved to provide media contents within the business apps with also the support for full HD contents at 1080p quality. - Silverlight 5 includes the support for 64-bit operating systems and relevant browsers and is also optimized to provide better performance. It can support the background thread for the networking which can reduce the latency of the network to a considerable extent. The Out-of-Browser functionality adds the support for utilizing various libraries and also the Win32 API. It also comes with testing support with VS 2010 which is mostly an automated procedure and has also enabled increased security aspects of all the Silverlight 5 developed applications by using the improved version of group policy support.

    Read the article

  • How to keep up to date with Programming Blogs Aggregators

    - by landal79
    Last week I read a great post of Jeff Atwood Keeping Up and "Just In Time" Learning that speaks about how to keep update. The blog post reports Kathy Sierra list, the first item 'Find the best aggregators' has captured my attention. I'm used to look at DZone, IMHO a good aggregator. DZone has voting and tagging. Or recently I discovered Java Code Geeks. Are there any other good programming blog post aggregator?

    Read the article

  • rpm file conflict after alien conversion

    - by Zitrax
    I have a program for which I generate a .deb file. The .deb file works fine on the systems I have tried it on (also tested with lintian). Previously it has worked to use alien to convert this to .rpm and install it on Suse. However it is now about a year since I tried it the last time and now I get an error when trying to install the alien made rpm on Fedora 11, I get this error: file /usr/share/icons/default.kde from install of testpkg-0.2-2.i386 conflicts with file from package kdelibs3-3.5.10-13.fc11.1.i586 Listing the content of the rpm file: $ rpm -qlp testpkg-0.2-2.i386.rpm / /usr /usr/games /usr/games/testpkg /usr/lib /usr/lib/libfmod-3.75.so /usr/share /usr/share/app-install /usr/share/app-install/icons /usr/share/app-install/icons/testpkg.png /usr/share/applications /usr/share/applications/testpkg.desktop /usr/share/doc /usr/share/doc/testpkg /usr/share/doc/testpkg/changelog.gz /usr/share/doc/testpkg/copyright /usr/share/games /usr/share/games/testpkg /usr/share/games/testpkg/images /usr/share/games/testpkg/images/bb.dat /usr/share/games/testpkg/images/bb_bg.dat /usr/share/games/testpkg/images/bubblemad_8x8.png /usr/share/games/testpkg/images/goldfont.png /usr/share/games/testpkg/lvl /usr/share/games/testpkg/lvl/lvl001.txt /usr/share/games/testpkg/lvl/lvl002.txt /usr/share/games/testpkg/lvl/lvl003.txt /usr/share/games/testpkg/lvl/lvl004.txt /usr/share/games/testpkg/lvl/lvl005.txt /usr/share/games/testpkg/lvl/lvl006.txt /usr/share/games/testpkg/lvl/lvl007.txt /usr/share/games/testpkg/music /usr/share/games/testpkg/music/alfa.it /usr/share/games/testpkg/music/beta.it /usr/share/games/testpkg/sounds /usr/share/games/testpkg/sounds/bounce.wav /usr/share/games/testpkg/sounds/click.wav /usr/share/games/testpkg/sounds/warning.wav /usr/share/icons /usr/share/icons/default.kde /usr/share/icons/default.kde/16x16 /usr/share/icons/default.kde/16x16/apps /usr/share/icons/default.kde/16x16/apps/testpkg.png /usr/share/man /usr/share/man/man6 /usr/share/man/man6/testpkg.6.gz Am I wrong in putting the kde icons in /usr/share/icons/default.kde which seem to be a symbolic link ? It's a symbolic link on both Kubuntu 9.10 and Fedora 11 though. Sounds like a common situation that the same directory is needed for different packages, so why is it a conflict ?

    Read the article

  • CentOS 5.5 ext4 conversion problem - ext4 partition is recognized as ext3

    - by FractalizeR
    Hello. I had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting yum install e4fsprogs tune2fs -O extents,uninit_bg,dir_index /dev/md2 nano /etc/fstab # I indicated here that my /dev/md2 is of ext4 uname -a mkinitrd -f /boot/initrd-2.6.18-194.3.1.el5.img 2.6.18-194.3.1.el5 Rebooted. I expected fsck to start automatically as said on some site. But it did not. Threw some error (don't remember exactly which). Ok, I booted linux rescue and executed fsck: fsck -t ext4 -fy /dev/md2 Partition went fine. But still when I boot main system, it says in log: "ext3-fs:" then something about not being able to mount ext3 partition due to unknown extended attributed (200). I booted linux rescue again. It loads fine and correctly determines all my machine partitions both ext3 (boot) and ext4 (/) under /mnt/sysimage just fine. I retried mkinitrd thing again watching it's output and ensured ext4 module is included into the system. I also edited menu.lst grub file to include rootfstype=ext4 kernel parameter. Bad luck. I still have message from ext3-fs about not being able to mount filesystem because of attributes and kernel panic immediately after. I checked /etc/fstab - it's fine and saying that root is of ext4. What did I do wrong? This machine is empty so I can just reformat it with 5.5 and recreate partitions to be originally ext4. But... I just want to know what did I do wrong.

    Read the article

  • SVG to JPEG/BMP conversion

    - by stanigator
    I have a svg file that I want to convert to jpeg or bmp (or any other image formats). However, all the conversions that I have used on the various online tools yielded very unclear output images. I don't want to use svg as it is very inconvenient. What would be your suggestions to get around that?

    Read the article

  • Some date math fun

    - by drsql
    Note: This concept presented is pretty simple and I am not claiming that I am the first to do this… so if you were the one who came up with this, let me know and I will give you linkage Today I was needing to get the data for the current month for a query, and it hit me that I really didn’t have a good way to do this.  There were two common methods that people use: WHERE YEAR(MonthColumn) = YEAR(Getdate()) AND MONTH(MonthColumn) = MONTH(Getdate()) But this particular method is pretty horrible...(read more)

    Read the article

  • Some date math fun

    - by drsql
    Note: This concept presented is pretty simple and I am not claiming that I am the first to do this… so if you were the one who came up with this, let me know and I will give you linkage Today I was needing to get the data for the current month for a query, and it hit me that I really didn’t have a good way to do this.  There were two common methods that people use: WHERE YEAR(MonthColumn) = YEAR(Getdate()) AND MONTH(MonthColumn) = MONTH(Getdate()) But this particular method is pretty horrible...(read more)

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >