Search Results

Search found 14405 results on 577 pages for 'great circle'.

Page 422/577 | < Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >

  • tftpd-hpa service must be restarted before working after fresh boot

    - by Steve
    I'm running Ubuntu 12.04 inside a VirtualBox VM. I've installed tftpd-hpa so I can boot an embedded Linux device via tftp. My problem is that after a fresh boot of the VM, tftpd doesn't seem to work until I restart the service, after which is works great until the system is rebooted. The transcript below should explain the situation. EDIT: After the fresh boot, I execute netstat -a | grep tftp and find nothing. After restarting the service, the same command returns udp 0 0 *:tftp *:* (whitespace removed). I think this might be the key to the problem, I'm just not sure how to resolve it. I don't think it's related to this specific issue, but I had another problem with tftpd that was asked and answered in this question. steve@steve-VirtualBox:~$ cat /etc/default/tftpd-hpa # /etc/default/tftpd-hpa TFTP_USERNAME="tftp" TFTP_DIRECTORY="/var/lib/tftpboot" TFTP_ADDRESS="0.0.0.0:69" TFTP_OPTIONS="--secure" steve@steve-VirtualBox:~$ ls -l /var/lib/tftpboot total 8204 -rw-r--r-- 1 root root 34352 May 28 08:22 am335x-boneblack.dtb -rw-r--r-- 1 root root 33206 May 28 08:22 am335x-bone.dtb -rw-r--r-- 1 root root 41564 May 28 08:22 am335x-evm.dtb -rw-r--r-- 1 root root 38048 May 28 08:22 am335x-evmsk.dtb -rwxr-xr-x 1 root root 4117904 May 20 09:39 zImage -rw-r--r-- 1 root root 4117616 May 28 08:22 zImage-am335x-evm.bin steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Transfer timed out. tftp> quit steve@steve-VirtualBox:~$ sudo service tftpd-hpa restart [sudo] password for steve: tftpd-hpa stop/waiting tftpd-hpa start/running, process 2106 steve@steve-VirtualBox:~$ tftp localhost tftp> get zImage Received 4143798 bytes in 1.4 seconds tftp> quit steve@steve-VirtualBox:~$

    Read the article

  • The best LCD monitors for reading text?

    - by Xeoncross
    I have been using an 19" Acer AL1916A B for several years now. While possibly failing in other areas - the text was incredibly sharp. Which is very important for someone like me that spends all day writing code. My eyes are very finely tuned and I can see refresh rates and even the smallest pixel overflows from anti-aliasing. Unfortunately it finally died. I then tried a 19" widescreen Acer X193w+ and found that the text was much less sharp. I also tried a 19" widescreen Samsung 920nw and was also disappointed. (by the way, widescreen is a great invention for companies - the same price for less screen!). I am looking for a couple of options of LCD's that hands-down render text ultra sharp and clear. This isn't subjective - an LCD either has sharp text or it doesn't. Anyone with delicate eyes can see the difference and knows what I'm talking about. Please also bare in mind that you're vision can adjust to a given screen; rendering your judgment biased if you do not constantly use other monitors also. If you use windows with ClearType enabled please do not reply.

    Read the article

  • Ubuntu root privs installation issue

    - by Pam
    I am a fairly new Ubuntu user (and Linux user, for that matter) and I just downloaded a program whose installer was a .sh file. Not thinking, I copied the installer to an /opt subdirectory, thinking that I was going to install the application there: sudo cp ~/Downloads/fooInstaller.sh /opt/someDir I can't remember, but I either had to use sudo because /opt required it, or I just used it without thinking, but in any case, I prefixed with sudo. Once in /opt/someDir, I executed the installer again, using sudo: sudo sh fooInstaller.sh The terminal went crazy, and a few seconds later, a graphical install wizard popped up that guided me through the rest of the process. At the end of the wizard I was prompted to launch the program, and I did, and everything was great. Until... I closed the program, and attempted to add it to my Ubuntu "panel" (the icon panel at the top of the screen). The program was installed to /usr/local/foo/theProgram, and so I specified that URL as the command in the custom app launcher. When I open the program through the panel/launcher (at the top of the screen), the program doesn't load or operate correctly. I get a lot of error messages complaining about being denied permissions. I'm assuming that this is a "superuser/installation/privs" issue, and not a problem with the application (hence this post at superuser.com instead of the application's forums), because when I launch the program from the terminal with sudo, it opens and executes perfectly fine, just like it did the first time around after the install wizard finished. I realize I'm probably going to have to uninstall the program completely, and re-install it differently. Finally, my question: After uninstalling, can I avoid all these issue by just running the installer (sh fooInstaller.sh) right out of my Downloads directory, sans the sudo prefix? If not, how do I get the program to install without root privs so that I can add it to my panel/launcher and get it executing correctly? Sorry for the long post but I didn't want to omit any details because, as I'm sure you can tell, I'm not really sure I know what I'm doing. Thanks for any help here!

    Read the article

  • Windows XP restarting repeatedly after a fresh restore

    - by DWilliams
    I don't normally deal with Windows but someone wanted me to fix their computer with Windows XP on it. It was just restarting every time it tried to boot. It would not go into safe mode, the result was the same regardless of the selected mode. The computer is like 4 years old and has been running the same installation for that entire time, so I figured the easiest solution was just to back up their files and re-install. I loaded the computer up with a live CD and copied their files off to a USB drive, then proceeded to run HP's "factory restore" feature (which I'm not particularly fond of, I'd rather have a disk to install from than reload all the crapware HP gets paid to install for you). It restored, and I put all their files back, installed their programs, and started the full windows update process. Everything seemed great so I left and told them what to do once it finished. A few hours pass, and my phone rings. Apparently it started doing the exact same thing as before once the updates finished. I don't have the computer sitting in front of me now so I can't really provide any more information than that. What could be causing this and, more importantly, how do I fix it? The fact that the same problem resurfaced after the restore makes me think it's either a hardware problem or an update breaking the computer.

    Read the article

  • Ubuntu: how to get audio to work in both Spotify (under Wine) and Flash (in Firefox)?

    - by Jonik
    I'm running Spotify on Linux using Wine. Sound worked great (even though the sound test in winecfg failed!), until I installed alsa-oss package yesterday to get Flash sound working in Firefox. Now Spotify says: "There is a problem with your sound card. Spotify can't play music." So the question is, how to get the sound in Spotify working again, so that it also keeps working in Flash & Firefox? Tweak some ALSA settings? Spotify settings? Add/remove some packages? By the way, curiously, now that sound doesn't work in Spotify, winecfg's "Test Sound" does work! This is Ubuntu 8.04 (Hardy). Sound card / driver is probably an integrated AC'97. Please mention if any additional information about the system is needed! Update: I have Flash 10 installed (outside the packaging system, using $MOZ_PLUGIN_PATH env variable), but also had Flash 9 from flashplugin-nonfree package - and the earlier version was being used by Firefox! Based on what Mike Arthur said about Flash and alsa-oss, I removed the older Flash (flashplugin-nonfree package) and alsa-oss - and Flash sound still works, which is nice. But for some reason Spotify still doesn't play sound, even though things should now be like they were originally... Update 2: Got it working, all smoothly, finally.

    Read the article

  • How to use Zune software to listen to podcasts with generic MP3 player?

    - by Bevan
    I listen to a bunch of podcasts - a great way to fill the otherwise mindless space of a daily commute. My MP3 player is a Transonic brand, appears on my computer as a generic storage device. I've been using iTunes to download the podcasts, and manually moving the files out of the disk folder onto my player, but this is pretty tedious. iTunes also fails to recognise that the files are gone and leaves them in the list. (Actually, iTunes for windows is pretty much a dog, but that's a different rant.) The Zune software is 99% of what I want in a podcast downloader - performs well, looks nice, downloads reliably and so on. Some features - like only downloading the next five unheard episodes of a podcast - are superb. However, if I manually move the files across to the MP3 player, the Zune software concludes that the file has never been downloaded, and downloads it again. This leads me to my question: What is a good way to use the Zune software to download podcasts for listening on a generic MP3 player? Are there any addons for the Zune software to make this easier? Registry hacks? Can I configure the Zune software to not download the same episode multiple times? Is there a way for the Zune software to populate my MP3 player directly, instead of having to copy files?

    Read the article

  • Getting Windows (VMware) to load from OSX's localhost without an Internet Connection

    - by Jonah Goldstein
    I'm using MAMP to host my local sites, and VirtualHostX so that I can access sites during local development via a convenient URL like mysite.dev I'm also running Windows XP via VirtualBox, and it would be great to be able to load up any of my local sites within windows while offline as currently often working without access, on the move, unfortunately. I know that I can append my IP and a nice domain name to the host file in C:/WINDOWS/system32/drivers/etc ... and i can find my IP simply through terminal with "ifconfig" while I'm online. The problem is that when I'm not online, there's no IP. Even if there is an IP (when i have a connection), I still have grab it and update the windows hosts' file all the time, since I'm developing from a laptop and have a new IP at the drop of a dime. I found a tutorial where the author is able to get a permanent IP. He uses VMware Fusion as his VMachine, which is the only difference between his setup and mine. By running the terminal command "ifconfig vmnet1" he gets: a secret IP the virtual machine uses to talk to OSX And that doesn't change - which is awesome. I'm assuming it exists even if he's offline. His tutorial is here, http://bit.ly/U2lq It would be pretty fantabulous if I could replicate this with virtualBox. Anyone have ideas? Thanks:)

    Read the article

  • CIFS mounted drive setting "stick-bit" on all files, cannot change permissions or modify files

    - by mattmcmanus
    I have a folder mounted on an Ubuntu 8.10 sever through cifs that I simply cannot change the permissions on once mounted. Here is a breakdown of what's going on: All files within the mounted folder automatically have their permissions set to -rwxrwSrwx regardless of whether the file is create on the windows server or on the linux machine. I have the same directory mounted on two other linux servers (both running 9.10 instead of 8.10) with no problems at all. They all are using the same fstab options and the same credentials. //server/folder /media/backups cifs credentials=/etc/samba/.arcadia_cred,noexec,noserverino 0 0 I've I run a chmod command a million different ways, all of which report successfully changing the permissions. However it doesn't. The issue began after I updated from 8.04 to 8.10 Any idea why this may be happening on one machine? Since it started after an upgrade I'm not sure what is the bes thing to do. Any help you could give would great! None of my automated backup scripts are working because of this!

    Read the article

  • Authenticated User Impersonation in Classic ASP under IIS7

    - by user52663
    I've recently moved one of our servers from Server 2003 and IIS6 to Server 2008 R2 and IIS7 (technically IIS7.5 I suppose). In doing so I am transitioning a small account management tool written in classic ASP and have run into a problem with user impersonation. Extensive searching hasn't been much help so far. Under IIS6, the site was configured to impersonate the logged-in user. Thus, if a domain admin logged in, he was able to run commands to create user directories, adjust permissions, etc. Using Procmon you can see the processes executing as that user. This worked fine. However, with the same code under IIS7, I am unable to get this behavior. I have enabled Basic Authentication, disabled Anonymous Auth, enabled impersonation and have changed the app pool to classic instead of integrated pipelining. Everything seems to be configured correctly, however, all the processes launched by the classic ASP site continue to run as the default AppPool identity and not the logged-in user. If it matters, programs are being launched with code such as: set Wsh = Server.CreateObject("WScript.Shell") Wsh.Run("cmd.exe /C mkdir D:\users\foo") Monitoring via Procmon shows cmd.exe being run as either "Classic .NET AppPool" or "DefaultAppPool" depending on the pipeline mode. Any suggestions on how to get the classic ASP site to impersonate and execute as the authenticated user would be great. Thanks!

    Read the article

  • Acer recovering windows vista

    - by Charlie Pigarelli
    My computer history is very long even of my computer has 4 years of life. An year ago I installed Windows 7 on this acer m1610 that had Vista before. My technic left me 2 recovery disc for "acer vista" before updating it to Windows 7. Then the computer had some trouble. The graphic card broke and we decided to use another computer. Yesterday I had the great idea to fuse the two computer to have a better one... So I moved the graphic card of the latter computer to the acer and everything gone well. Then the trouble of speed, it had before, come back. So I decided to reinstall the very first Windows: Vista back again. I booted the computer with those 2 DVD-R my technic left me and at the end of the process it asked me to insert "the backup cd number one or the system disk". I found 2 original Acer "Blank Recovery Disc" DVD-R and tried with those: rejected. Tried with empty DVD-+R: rejected. I tried with CDs: rejected. I don't have any system disc with me. Except for those 2 DVD-R my technic left me. What am I supposed to do now? I even tried with these fantomatic alt+f9/f10 that should start the recovery without any disc... But nothing happened. PS: the installation cannot complete if I do not insert the right disk. (The recovery disc uses Acer eRecovery Management as recovery software.

    Read the article

  • Error 550 Mail Relay Message Could Not Be Sent

    - by mraliks
    I'm not sure if this is the right area to ask, but here we go. I have a client who has a couple websites on a Windows server with MailEnable as the mail manager. Any emails being sent from the server work great, except when sending to some domains, the message does not go through due to the following error: 12/13/11 01:15:56 ME-I0026: [86476200E5834227A819E6E63E0EFDA2.MAI] Sending message 12/13/11 01:15:57 ME-IXXXX: [86476200E5834227A819E6E63E0EFDA2.MAI] Remote server returned a response indicating a permanent error. Server Response: (550 Relaying not allowed**) 12/13/11 01:15:57 ME-E0036: [86476200E5834227A819E6E63E0EFDA2.MAI] MAIL FROM command Failed. Can anyone give me some leads on how to correct the settings to allow emails to go through properly? In particular, the emails are not going through to a Network Solutions email account and Network Solutions has not been very helpful thus far. In addition, can a domain's DNS settings affect this error? Currently, the domains are hosted by Network Solutions and use the Network Solutions email service to send/receive email. The server is located with a different company and the Domains' DNS points to it. Which mail related DNS entries are allowed or not allowed in this scenario? Thanks

    Read the article

  • printing parallel over ethernet cable

    - by Crudler
    I have a bit of an interesting challenge :) I have a machine with a parallel printer output, i want it to be able to print instead to a printer in a different room and i know that parallel isnt great over big distances. i found this: http://www.amazon.com/over-Cat5-Extension-Cable-Adapter/dp/B002WJ9S6Y%3FSubscriptionId%3DAKIAINHICTCYYZGJWT4Q%26tag%3Dusbprintercables.net-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB002WJ9S6Y which will let me connect over cat5, but its usb to cat 5. my machine can only output on parallel (its not a computer) so what i was thinking of getting is a parallel(f) to usb and usb to parallel (M) for either side i.e. machine - parallel - usb - cat5 - usb - parallel -printer just seems a bit messy :) suggestions? another thing i would like to try is to get rid of the old school parallel printer and instead use a network based multi function. would this be possible? i.e. machine - parallel -usb - cat5 - ethernet print server - network printer this might be rougher because the machine cannot "know" that we are using a network printer. it can ONLY print to LPT1 Thanks!

    Read the article

  • CouchDB Errors: "undefined symbol: js_fgets" on Ubuntu 10.04

    - by MattEzell
    Hello, ServerFault Community. I have been wrestling with this problem for weeks without resolution and was hoping that someone here might be able to help. As indicated above, this is in Ubuntu 10.04 (x86) using CouchDB 0.11.0. I have build and installed CouchDB 0.11.0 from source. Everything with the dependencies and with the CouchDB install itself 'goes off without a hitch' - no errors or complaints in the configure, make or install... CouchDB seems to be running 'fine'. I can access Futon without issue and utilize all CouchDB functionality found in Futon... Unfortunately, when I attempt to use any shows/views for an installed Couch App, I get the above js_fgets error before terminal (and the Couch log) fills up with TONS of JSON. Nothing ever renders in the browser, though Firebugs reports. I have used the official instructions (paying special attention to the 10.04 instructions) and have followed pretty much every Google thread that I can find on similar issues. I have chase SpiderMonkey (and Rhino) as well as Erlang as the culprit, but despite reinstalls and tests with these components, I still cannot get past this CouchDB issue on my system... Ideas? Pointers? Suggestions? Has anyone successfully installed and used CouchDB 0.11.0 on an Ubuntu 10.04 system to RUN APPLICATIONS? I have come across multiple individuals who immediately respond 'yes, I have it installed - it works great' only to have them realize in the end (as I did) that just because Futon thinks things are working, doesn't mean CouchDB is properly handling ALL requests. Thank you for your time and assistance!

    Read the article

  • Exchange 2007 OWA returns blank page with url xxxxx&reason=0

    - by Dayton Brown
    Hi All: I've just run into an issue with my exchange OWA. It returns a blank page with the url string https://www.xxxxxxxx/&reason=0. Nothing in the logs gives me any good reasons. Here's what I've done so far; 1) reinstall Exchange roll-up 7. 2) recreate virtual directories. 3) reboot. (this was mostly a shot in the dark, but what the hell) Exchange via rpc/https is still working great. Anyone run into this before? EDIT Here is the last snippet from the OWASetupLog. doesn't look like anything blew up. [09:45:36] ******************************************* [09:45:36] * UpdateOwa.ps1: 5/27/2009 9:45:36 AM [09:45:40] Updating OWA on server HOMER [09:45:40] Finding OWA install path on the filesystem [09:45:40] Updating OWA to version 8.1.375.2 [09:45:40] Copying files from 'C:\Program Files\Microsoft\Exchange Server\ClientAccess\owa\Current' to 'C:\Program Files\Microsoft\Exchange Server\ClientAccess\owa\8.1.375.2' [09:45:41] Getting all Exchange 2007 OWA virtual directories [09:45:42] Found 1 OWA virtual directories. [09:45:42] Updating OWA virtual directories [09:45:42] Processing virtual directory with metabase path 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa'. [09:45:42] Metabase entry 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2' exists. Removing it. [09:45:42] Creating metabase entry IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2. [09:45:42] Configuring metabase entry 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2'. [09:45:43] Saving changes to 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa/8.1.375.2' [09:45:43] Saving changes to 'IIS://HOMER.DG.LOCAL/W3SVC/1/ROOT/owa'

    Read the article

  • SuPHP custom php.ini doesn't get read

    - by Mathieu Dumoulin
    Took me about 4 hours to get a FastCGI + SuPHP running off Ubuntu 11.10 and i'm now happy that it works mighty fine except for ONE big problem. Custom php.ini's don't seem to load. I tried changing some options and then firing off a phpinfo() and nothing changes in the phpinfo() which leads me to think that there is definitely a problem with the loading of the configuration file. <IfModule mod_suphp.c> AddHandler x-httpd-php .php <Location /> SuPHP_AddHandler x-httpd-php </Location> suPHP_ConfigPath /home/mdumoulin/Documents/tests/tests suPHP_Engine on </IfModule> As you can see, i took great care in making sure i wasn't referencing the php.ini file itself but the directory of the vhost. In the php.ini located in "/home/mdumoulin/Documents/tests/tests/php.ini", you can find: [PHP] error_reporting = E_ALL & ~E_DEPRECATED & ~E_NOTICE display_errors = Off And the log in /var/log/suphp/suphp.log doesn't contain anything relevant, (only old errors that occured before this post while i was testing suphp... So i'm stumped there, dunno what more i can do! Anyone got an idea? EDIT: FINALY, got time to work on this, i disabled FCGI and only enabled SuPHP but after restarting i still see "Server API: CGI/FastCGI". Is this what i should be getting or not? I believe that it's normal i get CGI since SUPHP works with a CGI... But i'm not too sure anymore...

    Read the article

  • PowerPoint save group as picture creates asymmetric edge, how to fix?

    - by Se Norm
    I created tons of figures for my thesis in PowerPoint and now I realized that when I try to save the grouped items (= one figure) as a picture (EMF), it somehow asymmetrically adds a border on the left and the bottom. First one is original group, second is the same pasted as a picture. Original group: Pasted as a picture: Does anyone have an idea how to fix that for a huge number of figures? I think it only started happening when I used a page size of 1m x 1m in PowerPoint to be able to zoom in more for some figures. However, I cannot not simply change the page size now as it messes up font and object sizes. Also, copying it into a smaller page and then saving as EMF doesn't do the trick. Maybe it is not related to the page size after all. Cropping every figure individually would be a lot of work, so I hope there is a different solution. I found the origin of the problem: the text label in the left bottom corner of each image (0s, 8s, 16s). I still do not understand why it is happening though, since the text label does not expand over the edge of the image (it was aligned using the align left function). It would still be great if there was an easy way to fix this, especially as I want to keep the text where it is.

    Read the article

  • Software mirroring (RAID1) versus "Fake Raid" for new Windows 7 install

    - by kquinn
    I've just ordered two new hard drives for my main desktop and a copy of Windows 7 Professional 64-bit. I'd like to do a clean install of Win7 onto the new drives (leaving my old XP Pro boot partition around for a while in case something goes disastrously wrong, etc.). I want to have them set up in mirrored (RAID-1) mode. My understanding is that Win7 Pro can do software mirroring, but can I set this up directly at install time? If so, how? Note that I'd like the disk to be split into three partitions (OS/Apps&Data/Bulk data), all of which should be mirrored. Would it be better (more reliable or faster) to use my motherboard's hardware RAID support? My motherboard is an older nVidia nForce 680i SLI, which is not the most stable of motherboards, and I'm not sure how trustworthy its RAID1 configuration might be (or if Win7 could even detect and install onto a hardware-mirrored volume). Also, the performance characteristics of RAID1 are rather different than RAID0 or RAID5, and I'm wondering if Win7's software mirroring might actually be faster than hardware RAID1 (for example, I'm more of a Unix admin when I have to wear the sysadmin hat, and I've had great success deploying ZFS; most hardware RAID1 implementations have to read both disks and compare results to look for data errors, but ZFS can read from only one disk in the mirror and just use the built-in checksum, meaning it can have up to 2x the number of reads in-flight, as long as there's no data corruption). Edit: Okay, my question about whether Windows 7 can do software mirroring has been answered, and it can. I'm still unsure whether Windows software RAID or my motherboard's hardware "fake RAID" function is a better choice, though. Remember, I'm only interested in mirroring -- not the more complicated striping or parity operations that generally show the poor performance of crappy motherboard RAID solutions.

    Read the article

  • Is there an high quality natural text reader for the mac?

    - by Another Registered User
    I'm reading about 150 pages of text on screen, every day. I will have to read about 15.000 in the next upcoming months. No joke. Well, the problem is this: I suffer from a sort of attention deficit hyperactivity disorder which forces me to read every sentence up to 10 times until I really get it. Mac OS X Snow Leopard has a built-in text reader with the name "Alex". Although it is already pretty good quality, I know there are far better natural sounding voices out there. I have heard already voices that are absolutely amazing compared to Alex. They're so good, that you can't tell anymore the difference between a real person or a computer. Alex still has this "metal factor" in its voice, which makes my ears hurt after 8 hours of listening. The next problem with Alex is, that he never makes a break after a sentence. Also, it's not possible to think about a sentence and then continue reading. It's also not possible to have him repeat a sentence, without tedious text selection and shortcut usage. Actually, the best tool I can imagine would have the option to read a sentence and move on to the next one after pressing a special key, OR repeating the previously one after pressing a special key. That would help so much! And if that's even with one of those bell lab / AT&T / whatever super-natural voices, even better! But it would be already a great relief if there was just a better tool to control Alex. To let him make breaks after sentences or let him speak big chunks of text sentence-by-sentence with fine-grained control over repetition and moving on. Is there anything?

    Read the article

  • Is it possible to use rsync over sftp (without an ssh shell)?

    - by Tom Feiner
    Rsync over ssh, works great every time. However, trying to rsync to a host which allows only sftp logins, but not ssh logins, provides the following error: rsync -av /source ssh user@remotehost:/target/ protocol version mismatch -- is your shell clean? (see the rsync man page for an explanation) rsync error: protocol incompatibility (code 2) at compat.c(171) [sender=3.0.6] Here's the relevant section from the rsync man page: This message is usually caused by your startup scripts or remote shell facility producing unwanted garbage on the stream that rsync is using for its transport. The way to diagnose this problem is to run your remote shell like this: ssh remotehost /bin/true > out.dat then look at out.dat. If everything is working correctly then out.dat should be a zero length file. If you are getting the above error from rsync then you will probably find that out.dat contains some text or data. Look at the contents and try to work out what is producing it. The most com- mon cause is incorrectly configured shell startup scripts (such as .cshrc or .profile) that contain output statements for non-interactive logins. Trying this on my system produced the following in out.dat: ssh-dummy-shell: Command not allowed. As I thought, the host is not allowing ssh logins. The following link shows that it is possible to accomplish this task using fuse with sshfs - however it is extremely slow, and not fit for production use. Is there any chance of getting rsync sftp to work?

    Read the article

  • Running a VM off a USB 2.0 Flash Drive - Mac/Parallels/XP

    - by geerlingguy
    I use a MacBook Air as my primary machine, and the 128GB SSD means space is precious. To save about 10 GB, I've been running Parallels with a Windows XP VM off an external USB hard drive, which performs as well in everyday use as running the VM off the internal SSD. So, I bought a tiny 32GB USB 2.0 flash drive, plugged it into the MacBook Air, formatted it first as ExFAT (which was slow), then as Mac OS Extended (Journaled) (which was also slow), and copied over my VM file, and ran Parallels off it. My full experience is documented here: http://www.midwesternmac.com/blogs/jeff-geerling/running-windows-xp-vm Straight file copies are really fast — 30 MB/sec read (solid the whole time), and 10-11 MB/sec write (solid the whole time). But I noticed that once XP started running, the disk access rates were in the low KB ranges. Are USB flash drives really that poor at random access, or could I possibly be missing something (the format of the flash drive, etc.?)? Of note, I've tried the following, to no great effect: Formatting the drive as either ExFAT or Mac OS Extended (Journaled) Unplugging all other USB devices and turning off Bluetooth (which runs on the right-side-port USB bus). Plugging in the flash drive either direct in the right side port, or the left side port, or into a USB 2.0 hub

    Read the article

  • Port forwarding on D-Link DIR-615 super-slow, useless

    - by Jaroslav Záruba
    Hello I have replaced my old router with DIR-615 from D-Link, and now the port forwarding is so slow it makes the router practically useless for requests coming from outside of my network. Accessing the router itself (admin UI) from outside is without any issues, no delay whatsoever. But when I try to access a service residing on any of the computers in my network from outside the requests take minutes and minutes. (E.g. I can see source of my GWT-app main page, but loading additional CSS and JS files takes years.) If anyone could recommend any further diagnostics I should do to figure out what is happening it would be great. Few notes: happens with more services (web-app on Tomcat, viewing directory index via Apache) it does not make a difference whether the service is hosted on wired or wireless PC accessing the service on a localhost works fine, as does any 'inner' communication turning off firewall on target PC does not make difference either (makes sense) when I replace this router with the old one (both 192.168.1.1) everything works fine I see nothing suspicious in the router's log I believe I have the latest firmware (4.11) DIR-615 sucks, it already died once completely Regards Jarda Z.

    Read the article

  • Robocopy failure with Windows Server 2008 Scheduled Task

    - by CC
    So I have a batch script for robocopy. Running this from the command line does exactly what I want. robocopy "D:\SQL Backup" \\server1\Backup$\daily /mir /s /copyall /log:\\lmcrfs4g\NavBackup$\robocopyLog.txt /np Then I create a Scheduled Task in Windows Server 2008. If I set up the task to use my Domain Admin account, great. But I'm trying to get it to run as a separate domain account for Scheduled Tasks. If I use that account, folders get created, but files aren't copied. I get the following error: 2011/02/17 15:41:48 ERROR 1307 (0x0000051B) Copying NTFS Security to Destination Directory D:\SQL Backup\folder\ This security ID may not be assigned as the owner of this object. I've verified my domain\Scheduled Tasks account has Full Control NTFS permissions on both the source and destination, and the Full Control Sharing on my hidden \server1\backup$ share. Just for giggles, I've tried adding the domain account to the local Administrators group on both servers. This works fine, but that seems like a lot of privileges just to copy files. Any ideas on what I'm missing?

    Read the article

  • Windows server 2008, Dns. I'm confused

    - by Dejan.S
    Hi. I recently setup a window server 2008 server at work. Keep in mind I have never worked with it before:). Background story is I try to host a couple of sites on the server through iis7, I got domains (currently hosted at other hosters for the moment). I want to point the domain NS to my server on all of them. I have read how to setup a DNS on the server, so far so good. now my dns is companyname.com in the server manager I got DNS / companyname.com in there I got ns.comanyname.com, in there I got Host(A) with the server ip now this is where I get confused about how things work with DNS, NS & Host(A). I dont know how to assign(so to speak) the Host(A) to one of my webapps hosted on the iis7, because that is the pointer right?. To leave an example to work with lets say, Hosted.com is hosted on my iis7, on port 81. You don't understand how great full I would be if somebody could explain this confusion. EDIT: Do I need to create a DNS for every site hosted on my server? Or just make a A Host/Record? Thanks guys

    Read the article

  • RRAS Public Address Pool on Windows Server 2008

    - by Art
    I have a Windows 2008 server with two NICs running RRAS and a small public website. It also does NAT for several other PCs on my network and everything works great. I have a block of 5 public static IPs from my ISP, one of which is bound to the public NIC in the Windows 2008 server. I would like to assign one of the remainging 4 public IPs to a machine on my private network. I thought I could do this by going into RRAS, selecting NAT under IPv4 and then adding the public IP address to the address pool and specifying a reservation for the machine I would like to use that address by adding its private ip address. When I do this, the machine I reserved the public IP address for seems to loose all outside network connectivity. I can still ping other PCs on my 192.168.0.* net, but anything outside is no longer reachable. When I remove the reservation, everything seems to work. After setting the reservation and right clicking on the external public interface and selecting 'Show Mappings' I can see outbound requests from my private address with the desired associated private address, however I do not see any inbound requests. What am I doing wrong/missing?

    Read the article

  • django : Serving static files through nginx

    - by PlanetUnknown
    I'm using apache+mod_wsgi for django. And all css/js/images are served through nginx. For some odd, reason when others/friends/colleagues try accessing the site, jquery/css is not getting loaded for them, hence the page looks jumbled up. My html files use code like this - <link rel="stylesheet" type="text/css" href="http://x.x.x.x:8000/css/custom.css"/> <script type="text/javascript" src="http://1x.x.x.x:8000/js/custom.js"></script> My nginx configuration in sites-available is like this - server { listen 8000; server_name localhost; access_log /var/log/nginx/aa8000.access.log; error_log /var/log/nginx/aa8000.error.log; location / { index index.html index.htm; } location /static/ { autoindex on; root /opt/aa/webroot/; } } There is a directory /opt/aa/webroot/static/ which have corresponding css & js directories. The odd thing is that the pages show fine when I access them. I have cleared my cache/etc, but the page loads fine for me, from various browsers. Also, I don't see any 404 any error in the nginx log files. Actually the logs for nginx are not getting refreshed at all. I restarted the nginx server using root, is that incorrect ? There is a user www-data defined in the nginx configuration file. Any pointers would be great.

    Read the article

< Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >