Search Results

Search found 11296 results on 452 pages for 'rendering engine'.

Page 424/452 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

• SQL Server Optimizer Malfunction?

  - by Tony Davis

  There was a sharp intake of breath from the audience when Adam Machanic declared the SQL Server optimizer to be essentially "stuck in 1997". It was during his fascinating "Query Tuning Mastery: Manhandling Parallelism" session at the recent PASS SQL Summit. Paraphrasing somewhat, Adam (blog | @AdamMachanic) offered a convincing argument that the optimizer often delivers flawed plans based on assumptions that are no longer valid with today’s hardware. In 1997, when Microsoft engineers re-designed the database engine for SQL Server 7.0, SQL Server got its initial implementation of a cost-based optimizer. Up to SQL Server 2000, the developer often had to deploy a steady stream of hints in SQL statements to combat the occasionally wilful plan choices made by the optimizer. However, with each successive release, the optimizer has evolved and improved in its decision-making. It is still prone to the occasional stumble when we tackle difficult problems, join large numbers of tables, perform complex aggregations, and so on, but for most of us, most of the time, the optimizer purrs along efficiently in the background. Adam, however, challenged further any assumption that the current optimizer is competent at providing the most efficient plans for our more complex analytical queries, and in particular of offering up correctly parallelized plans. He painted a picture of a present where complex analytical queries have become ever more prevalent; where disk IO is ever faster so that reads from disk come into buffer cache faster than ever; where the improving RAM-to-data ratio means that we have a better chance of finding our data in cache. Most importantly, we have more CPUs at our disposal than ever before. To get these queries to perform, we not only need to have the right indexes, but also to be able to split the data up into subsets and spread its processing evenly across all these available CPUs. Improvements such as support for ColumnStore indexes are taking things in the right direction, but, unfortunately, deficiencies in the current Optimizer mean that SQL Server is yet to be able to exploit properly all those extra CPUs. Adam’s contention was that the current optimizer uses essentially the same costing model for many of its core operations as it did back in the days of SQL Server 7, based on assumptions that are no longer valid. One example he gave was a "slow disk" bias that may have been valid back in 1997 but certainly is not on modern disk systems. Essentially, the optimizer assesses the relative cost of serial versus parallel plans based on the assumption that there is no IO cost benefit from parallelization, only CPU. It assumes that a single request will saturate the IO channel, and so a query would not run any faster if we parallelized IO because the disk system simply wouldn’t be able to handle the extra pressure. As such, the optimizer often decides that a serial plan is lower cost, often in cases where a parallel plan would improve performance dramatically. It was challenging and thought provoking stuff, as were his techniques for driving parallelism through query logic based on subsets of rows that define the "grain" of the query. I highly recommend you catch the session if you missed it. I’m interested to hear though, when and how often people feel the force of the optimizer’s shortcomings. Barring mistakes, such as stale statistics, how often do you feel the Optimizer fails to find the plan you think it should, and what are the most common causes? Is it fighting to induce it toward parallelism? Combating unexpected plans, arising from table partitioning? Something altogether more prosaic? Cheers, Tony.

  Read the article

• The Best Data Integration for Exadata Comes from Oracle

  - by maria costanzo

  Oracle Data Integrator and Oracle GoldenGate offer unique and optimized data integration solutions for Oracle Exadata. For example, customers that choose to feed their data warehouse or reporting database with near real-time throughout the day, can do so without decreasing  performance or availability of source and target systems. And if you ask why real-time, the short answer is: in today’s fast-paced, always-on world, business decisions need to use more relevant, timely data to be able to act fast and seize opportunities. A longer response to "why real-time" question can be found in a related blog post. If we look at the solution architecture, as shown on the diagram below,  Oracle Data Integrator and Oracle GoldenGate are both uniquely designed to take full advantage of the power of the database and to eliminate unnecessary middle-tier components. Oracle Data Integrator (ODI) is the best bulk data loading solution for Exadata. ODI is the only ETL platform that can leverage the full power of Exadata, integrate directly on the Exadata machine without any additional hardware, and by far provides the simplest setup and fastest overall performance on an Exadata system. We regularly see customers achieving a 5-10 times boost when they move their ETL to ODI on Exadata. For  some companies the performance gain is even much higher. For example a large insurance company did a proof of concept comparing ODI vs a traditional ETL tool (one of the market leaders) on Exadata. The same process that was taking 5hrs and 11 minutes to complete using the competing ETL product took 7 minutes and 20 seconds with ODI. Oracle Data Integrator was 42 times faster than the conventional ETL when running on Exadata.This shows that Oracle's own data integration offering helps you to gain the most out of your Exadata investment with a truly optimized solution. GoldenGate is the best solution for streaming data from heterogeneous sources into Exadata in real time. Oracle GoldenGate can also be used together with Data Integrator for hybrid use cases that also demand non-invasive capture, high-speed real time replication. Oracle GoldenGate enables real-time data feeds from heterogeneous sources non-invasively, and delivers to the staging area on the target Exadata system. ODI runs directly on Exadata to use the database engine power to perform in-database transformations. Enterprise Data Quality is integrated with Oracle Data integrator and enables ODI to load trusted data into the data warehouse tables. Only Oracle can offer all these technical benefits wrapped into a single intelligence data warehouse solution that runs on Exadata. Compared to traditional ETL with add-on CDC this solution offers: §  Non-invasive data capture from heterogeneous sources and avoids any performance impact on source §  No mid-tier; set based transformations use database power §  Mini-batches throughout the day –or- bulk processing nightly which means maximum availability for the DW §  Integrated solution with Enterprise Data Quality enables leveraging trusted data in the data warehouse In addition to Starwood Hotels and Resorts, Morrison Supermarkets, United Kingdom’s fourth-largest food retailer, has seen the power of this solution for their new BI platform and shared their story with us. Morrisons needed to analyze data across a large number of manufacturing, warehousing, retail, and financial applications with the goal to achieve single view into operations for improved customer service. The retailer deployed Oracle GoldenGate and Oracle Data Integrator to bring new data into Oracle Exadata in near real-time and replicate the data into reporting structures within the data warehouse—extending visibility into operations. Using Oracle's data integration offering for Exadata, Morrisons produced financial reports in seconds, rather than minutes, and improved staff productivity and agility. You can read more about Morrison’s success story here and hear from Starwood here. From an Irem Radzik article.

  Read the article

• When does a Tumbling Window Start in StreamInsight

  Whilst getting some courseware ready I was playing around writing some code and I decided to very simply show when a window starts and ends based on you asking for a TumblingWindow of n time units in StreamInsight.  I thought this was going to be a two second thing but what I found was something I haven’t yet found documented anywhere until now.   All this code is written in C# and will slot straight into my favourite quick-win dev tool LinqPad   Let’s first create a sample dataset   var EnumerableCollection = new [] { new {id = 1, StartTime = DateTime.Parse("2010-10-01 12:00:00 PM").ToLocalTime()}, new {id = 2, StartTime = DateTime.Parse("2010-10-01 12:20:00 PM").ToLocalTime()}, new {id = 3, StartTime = DateTime.Parse("2010-10-01 12:30:00 PM").ToLocalTime()}, new {id = 4, StartTime = DateTime.Parse("2010-10-01 12:40:00 PM").ToLocalTime()}, new {id = 5, StartTime = DateTime.Parse("2010-10-01 12:50:00 PM").ToLocalTime()}, new {id = 6, StartTime = DateTime.Parse("2010-10-01 01:00:00 PM").ToLocalTime()}, new {id = 7, StartTime = DateTime.Parse("2010-10-01 01:10:00 PM").ToLocalTime()}, new {id = 8, StartTime = DateTime.Parse("2010-10-01 02:00:00 PM").ToLocalTime()}, new {id = 9, StartTime = DateTime.Parse("2010-10-01 03:20:00 PM").ToLocalTime()}, new {id = 10, StartTime = DateTime.Parse("2010-10-01 03:30:00 PM").ToLocalTime()}, new {id = 11, StartTime = DateTime.Parse("2010-10-01 04:40:00 PM").ToLocalTime()}, new {id = 12, StartTime = DateTime.Parse("2010-10-01 04:50:00 PM").ToLocalTime()}, new {id = 13, StartTime = DateTime.Parse("2010-10-01 05:00:00 PM").ToLocalTime()}, new {id = 14, StartTime = DateTime.Parse("2010-10-01 05:10:00 PM").ToLocalTime()} };   Now let’s create a stream of point events   var inputStream = EnumerableCollection .ToPointStream(Application,evt=> PointEvent .CreateInsert(evt.StartTime,evt),AdvanceTimeSettings.StrictlyIncreasingStartTime);   Now we can create our windows over the stream.  The first window we will create is a one hour tumbling window.  We’'ll count the events in the window but what we do here is not the point, the point is our window edges.   var windowedStream = from win in inputStream.TumblingWindow(TimeSpan.FromHours(1),HoppingWindowOutputPolicy.ClipToWindowEnd) select new {CountOfEntries = win.Count()};   Now we can have a look at what we get.  I am only going to show the first non Cti event as that is enough to demonstrate what is going on   windowedStream.ToIntervalEnumerable().First(e=> e.EventKind == EventKind.Insert).Dump("First Row from Windowed Stream");   The results are below   EventKind Insert   StartTime 01/10/2010 12:00   EndTime 01/10/2010 13:00     { CountOfEntries = 5 }   Payload CountOfEntries 5   Now this makes sense and is quite often the width of window specified in examples.  So what happens if I change the windowing code now to var windowedStream = from win in inputStream.TumblingWindow(TimeSpan.FromHours(5),HoppingWindowOutputPolicy.ClipToWindowEnd) select new {CountOfEntries = win.Count()}; Now where does your window start?  What about   var windowedStream = from win in inputStream.TumblingWindow(TimeSpan.FromMinutes(13),HoppingWindowOutputPolicy.ClipToWindowEnd) select new {CountOfEntries = win.Count()};   Well for the first example your window will start at 01/10/2010 10:00:00 , and for the second example it will start at  01/10/2010 11:55:00 Surprised?   Here is the reason why and thanks to the StreamInsight team for listening.   Windows start at TimeSpan.MinValue. Windows are then created from that point onwards of the size you specified in your code.  If a window contains no events they are not produced by the engine to the output.  This is why window start times can be before the first event is created.

  Read the article

• Microsoft Certifications &ndash; how to prep? and why?

  - by Kelly Jones

  I often get asked by my colleagues, “how do you prepare for Microsoft exams?” Well, the answer for me is a little complicated, so I thought I’d write up here what I do. The first thing I do is go to Microsoft’s website to find the exam that I need to take.  If you’re looking to get a particular certification, then their site lists the exam or exams that you’ll need to pass.  If you’ve already taken an exam, you can log onto the MCP website and use their certification planner.  This little tool tells you what tests you need, based on the exams you’ve already passed.  It is very helpful with the certifications that are multiple tests and especially ones that have electives. Once you’ve identified the test, you can use Microsoft’s website to see the topics that it covers.  This is a good outline to follow when you study.  I’ll keep this handy to reference back throughout my studying to make sure that I’m covering all the topics I need to know. The next step is probably where I am a little different from others.  IF the exam outline covers material that I’ve already been working with, then I’ll skip a lot of the studying and go directly to the practice tests.  However, if I’m looking at the outline and wondering how in the world do you do that? – then it’s time to hit the books. So, where to find study materials?  Try typing in the exam number into any search engine.  You’ll typically find a ton of resources.  If you’re lucky, you’ll find books that others recommend based on their studying and exam experience.  As a Sogeti employee, I have access to three really good resources: an internal company list of all of the consultants who have passed particular tests (on our Connex website), Books 24x7, and Transcender practice exams. Once my studying is done (either through books or experience), I’ll go through the practice exams.  I find them really helpful in getting my knowledge lined up to the thinking process that the exam writers use.  If I’m relying on my experience, then this really helps me to identify gaps in my knowledge that I’ll need to fill. That’s about it.  If I’m doing ok on the practice exams, then I’ll take the real thing.  I’ve found that the practice exams are usually more difficult than then real thing. Oh – one other thing I do related to Microsoft exams – I try to take any beta exams that Microsoft makes available that fall into my skill set.  Microsoft has started a blog to announce these and the seats usually fill up really quick.  The blog is at http://blogs.technet.com/betaexams/ . You don’t get your results instantly, like a normal exam, instead you have to wait for everyone to finish taking the beta exams and for Microsoft to determine which questions they are using and which they are dropping.  So, be prepared to wait six to eight weeks for your results.

  Read the article

• My .NET Technology picks for 2011

  - by shiju

  My Technology predictions for 2011 Cloud computing and Mobile application development will be the hottest trends for 2011. I hope that Windows Azure will be very hot in year 2011 and lot of cloud computing adoption will be happen with Windows Azure on 2011. Web application scalability will be the big challenge for Architects in the next year and architecture approaches like CQRS will get some attention on next year. Architects will look on different options for web application scalability and adoption of NoSQL and Document databases will be more in the year 2011. The following are the my technology picks for .Net stack Windows Azure Windows Azure will be one of the hottest technologies of 2011. Adoption of Cloud and Windows Azure will get big attention on next year. The Windows Azure platform is a flexible cloud–computing platform that lets you focus on solving business problems and addressing customer needs. No need to invest upfront on expensive infrastructure. Pay only for what you use, scale up when you need capacity and pull it back when you don’t. We handle all the patches and maintenance — all in a secure environment with over 99.9% uptime. Silverlight 5 Silverlight is becoming a common technology for variety of development platforms. You can develop Silverlight applications for web, desktop and windows phone. The new Silverlight 5 beta will be available during the starting quarter of the next year with new capabilities and lot of new features. Silverlight 5 will be powerful development platform for both web-based business apps and rich media solutions. We can expect final version of Silverlight 5 on end of 2011. Windows Phone 7 Development Tools Mobile application development will be very hot in year 2011 and Windows Phone 7 will be one of the hottest technologies of next year. You can get introduction on Windows Phone 7 Development Tools from somasegar’s blog post and MSDN documentation available from here. EF Code First I am a big fan of Entity Framework’s Code First approach and hope that Code First approach will attract more people onto Entity Framework 4. EF Code First lets you focus on domain model which will enable Domain-Driven Development for applications. I hope that DDD fans will love the EF Code First approach. The Entity Framework 4 now supports three types of approaches and these will attract different types of developer audience. ASP.NET MVC 3 The ASP.NET MVC 3 will be the hottest technology of Microsoft web stack on the next year. ASP.NET developers will widely move to the ASP.NET MVC Framework from their WebForms development. The new Razor view engine is great and it will increase the adoption of ASP.NET MVC 3. Razor the will improve the productivity when working with ASP.NET MVC 3 Views. You can build great web applications using ASP.NET MVC 3 and jQuery with better maintainability, generation of clean HTML and even better performance. In my opinion, the best technology stack for web development is ASP.NET MVC 3 and Entity Framework 4 Code First as ORM. On the next year, you can expect more articles from my blog on ASP.NET MVC 3 and Entity Framework 4 Code First. RavenDB NoSQL and Document databases will get more attention on the coming year and RavenDB will be the most notable document database in the .NET stack. RavenDB is an Open Source (with a commercial option) document database for the .NET/Windows platform developed by Ayende Rahien. RavenDB is .NET focused document database which comes with a fully functional .NET client API and supports LINQ. I have written few articles on RavenDB and you can read it from here. Managed Extensibility Framework (MEF) Many people didn't realized the power of MEF. The MEF lets you create extensible applications and provides a great solution for the runtime extensibility problem. I hope that .NET developers will more adopt the MEF on the next year for their .NET applications. You can get an excellent introduction on MEF from Anoop Madhusudanan’s blog post MEF or Managed Extensibility Framework – Creating a Zoo and Animals

  Read the article

• Non use of persisted data

  - by Dave Ballantyne

  Working at a client site, that in itself is good to say, I ran into a set of circumstances that made me ponder, and appreciate, the optimizer engine a bit more. Working on optimizing a stored procedure, I found a piece of code similar to : select BillToAddressID, Rowguid, dbo.udfCleanGuid(rowguid) from sales.salesorderheaderwhere BillToAddressID = 985 A lovely scalar UDF was being used,  in actuality it was used as part of the WHERE clause but simplified here.  Normally I would use an inline table valued function here, but in this case it wasn't a good option. So this seemed like a pretty good case to use a persisted column to improve performance. The supporting index was already defined as create index idxBill on sales.salesorderheader(BillToAddressID) include (rowguid) and the function code is Create Function udfCleanGuid(@GUID uniqueidentifier)returns varchar(255)with schemabindingasbegin Declare @RetStr varchar(255) Select @RetStr=CAST(@Guid as varchar(255)) Select @RetStr=REPLACE(@Retstr,'-','') return @RetStrend Executing the Select statement produced a plan of : Nothing surprising, a seek to find the data and compute scalar to execute the UDF. Lets get optimizing and remove the UDF with a persisted column Alter table sales.salesorderheaderadd CleanedGuid as dbo.udfCleanGuid(rowguid)PERSISTED A subtle change to the SELECT statement… select BillToAddressID,CleanedGuid from sales.salesorderheaderwhere BillToAddressID = 985 and our new optimized plan looks like… Not a lot different from before!  We are using persisted data on our table, where is the lookup to fetch it ?  It didnt happen,  it was recalculated.  Looking at the properties of the relevant Compute Scalar would confirm this ,  but a more graphic example would be shown in the profiler SP:StatementCompleted event. Why did the lookup happen ? Remember the index definition,  it has included the original guid to avoid the lookup.  The optimizer knows this column will be passed into the UDF, run through its logic and decided that to recalculate is cheaper than the lookup.  That may or may not be the case in actuality,  the optimizer has no idea of the real cost of a scalar udf.  IMO the default cost of a scalar UDF should be seen as a lot higher than it is, since they are invariably higher. Knowing this, how do we avoid the function call?  Dropping the guid from the index is not an option, there may be other code reliant on it.   We are left with only one real option,  add the persisted column into the index. drop index Sales.SalesOrderHeader.idxBillgocreate index idxBill on sales.salesorderheader(BillToAddressID) include (rowguid,cleanedguid) Now if we repeat the statement select BillToAddressID,CleanedGuid from sales.salesorderheaderwhere BillToAddressID = 985 We still have a compute scalar operator, but this time it wasnt used to recalculate the persisted data.  This can be confirmed with profiler again. The takeaway here is,  just because you have persisted data dont automatically assumed that it is being used.

  Read the article

• Investigating on xVelocity (VertiPaq) column size

  - by Marco Russo (SQLBI)

    In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

  Read the article

• Rotating text using CSS

  - by Renso

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Goal: Rotating text using css only. How: Surprisingly IE supports this feature rather well. You could use property filters in IE, but since this is only supported on IE browsers, I would not recommend it. CSS3, still in proposal state, has a "writing-mode" property for doing this. It has been part of IE's browser engine since IE5.5. Now that it is part of the CSS3 draft specification, would be the best way to implement this going forward. Webkit based browsers; Firefox 3.5+, Opera 11 and IE9 implement this feature differently by utilizing the transform property. Without using third-party JavaScript or CSS properties, we can use the CSS3 "writing-mode" property, supported from IE5.5 up to IE8, the latter adding addition formatting options through -ms extensions. <style type="text/css"> .rightToLeft{ writing-mode: tb-rl; } </style> <p class="rightToLeft">This is my text</p> This will rotate the text 90 degrees, starting from the right to the left. Here are all the options: ·         lr-tb – Default value, left to right, top to bottom ·         rl-tb – Right to left, top to bottom ·         tb-rl – Vertically; top to bottom, right to left ·         bt-rl – Vertically; bottom to top, right to left ·         tb-lr – Available in IE8+: -ms-writing-mode; top to bottom, left to right ·         bt-lr – Bottom to top, left to right ·         lr-bt – Left to right, bottom to top What about Firefox, Safari, etc.? The following techniques need to be used on Webkit browsers like Firefox, Opera 11, Google Chrome and IE9. These browsers require their proprietary vendor extensions: -moz-, -webkit-, -o- and -ms-. -webkit-transform: rotate(90deg);    -moz-transform: rotate(90deg); -ms-transform: rotate(90deg); -o-transform: rotate(90deg); transform: rotate(90deg);

  Read the article

• Converting .docx to pdf (or .doc to pdf, or .doc to odt, etc.) with libreoffice on a webserver on the fly using php

  - by robertphyatt

  Ok, so I needed to convert .docx files to .pdf files on the fly, but none of the free php libraries that were available let me do it on my server (a webservice was not good enough). Basically either I needed to pay for a library (and have it maybe suck) or just deal with the free ones that didn't convert the formatting well enough. Not good enough! I found that LibreOffice (OpenOffice's successor) allows command line conversion using the LibreOffice conversion engine (which DID preserve the formatting like I wanted and generally worked great). I loaded the latest version of Ubuntu (http://www.ubuntu.com/download/ubuntu/download) onto my Virtual Box (https://www.virtualbox.org/wiki/Downloads) on my computer and found that I was able to easily convert files using the commandline like this: libreoffice --headless -convert-to pdf fileToConvert.docx -outdir output/path/for/pdf I thought: sweet...but I don't have admin rights on my host's web server. I tried to use a "portable" version of LibreOffice that I obtained from http://portablelinuxapps.org/ but I was unable to get it to work on my host's webserver, because my host's webserver didn't have all the dependencies (Dependency Hell! http://en.wikipedia.org/wiki/Dependency_hell) I was at a loss of how to make it work, until I ran across a cool project made by a Ph.D. student (Philip J. Guo) at Stanford called CDE: http://www.stanford.edu/~pgbovine/cde.html I will let you look at his explanations of how it works (I followed what he did in http://www.youtube.com/watch?feature=player_embedded&v=6XdwHo1BWwY, starting at about 32:00 as well as the directions on his site), but in short, it allows one to avoid dependency hell by copying all the files used when you run certain commands, recreating the linux environment where the command worked. I was able to use this to run LibreOffice without having to resort to someone's portable version of it, and it worked just like it did when I did it on Ubuntu with the command above, with a tweak: I needed to run the wrapper of LibreOffice the CDE generated. So, below is my PHP code that calls it. In this code snippet, the filename to be copied is passed in as $_POST["filename"]. I copy the file to the same spot where I originally converted the file, convert it, copy it back and then delete all the files (so that it doesn't start growing exponentially). I did it this way because I wasn't able to make it work otherwise on the webserver. If there is a linux + webserver ninja out there that can figure out how to make it work without doing this, I would be interested to know what you did. Please post a comment or something if you did that. <?php //first copy the file to the magic place where we can convert it to a pdf on the fly copy($time.$_POST["filename"], "../LibreOffice/cde-package/cde-root/home/robert/Desktop/".$_POST["filename"]); //change to that directory chdir('../LibreOffice/cde-package/cde-root/home/robert'); //the magic command that does the conversion $myCommand = "./libreoffice.cde --headless -convert-to pdf Desktop/".$_POST["filename"]." -outdir Desktop/"; exec ($myCommand); //copy the file back copy("Desktop/".str_replace(".docx", ".pdf", $_POST["filename"]), "../../../../../documents/".str_replace(".docx", ".pdf", $_POST["filename"])); //delete all the files out of the magic place where we can convert it to a pdf on the fly $files1 = scandir('Desktop'); //my files that I generated all happened to start with a number. $pattern = '/^[0-9]/'; foreach ($files1 as $value) { preg_match($pattern, $value, $matches); if(count($matches) ?> 0) { unlink("Desktop/".$value); } } //changing the header to the location of the file makes it work well on androids header( 'Location: '.str_replace(".docx", ".pdf", $_POST["filename"]) ); ?> And here is the tar.gz file I generated I generated with CDE. To duplicate what I did exactly, put the tar.gz file in a folder somewhere. I will call that folder the "root". Make a new folder called "documents" in the "root" folder. Unpack the tar.gz and run the php script above from the "documents" folder. Success! I made a truly portable version of LibreOffice that can convert files on the fly on a webserver using 100% free, open source software!

  Read the article

• Would this be a good web application architecture?

  - by Gustav Bertram

  My problem Our MVC based framework does not allow us to cache only part of our output. Ideally we want to cahce static and semi-static bits, and run dynamic bits. In addition, we need to consider data caching that reacts to database changes. My idea The concept I came up with was to represent a page as a tree of XML fragment objects. (I say XML, but I mean XHTML). Some of the fragments are dynamic, and can pull their data directly from models or other sources, but most of the fragments are static scaffolding. If a subtree of fragments is completely static, then I imagine that they could unfold into pure XML that would then be cached as the text representation of their parent element. This process would ideally continue until we are left with a root element that contains all of the static XML, and has a couple of dynamic XML fragments that are resolved and attached to the relevant nodes of the XML tree just before the page is displayed. In addition to separating content into dynamic and static fragments, some fragments could be dynamic and cached. A simple expiry time which propagates up through the XML fragment tree would indicate that a specific fragment should periodically be refreshed. A newspaper section or front page does not need to be updated each second. Minutes or sometimes even longer is sufficient. Other fragments would be dynamic and uncached. Typically too many articles are viewed for them to be cached - the cache would overflow. Some individual articles may be cached if they are extremely popular. Functional notes The folding mechanism could be to be smart enough to judge when it would be more profitable to fold a dynamic cached fragment and propagate the expiry date to the parent fragment, or to keep it separate and simple attach to the XML tree when resolving the page. If some dynamic cached fragments are associated to database objects through mechanisms like a globally unique content id, then changes to the database could trigger changes to the output cache. If fragments store the identifiers of parent fragments, then they could trigger a refolding process that would then include the updated data. A set of pure XML with an ordered array of fragment objects (that each store the identifying information of the node to which they should be attached), can be resolved in a fairly simple way by walking the XML tree, and merging the data from the fragments. Because it is not necessary to parse and construct the entire tree in memory before attaching nodes, processing should be fairly fast. The identifiers of each fragment would be a combination of relevant identity data and the type of fragment object. Cached parent fragments would contain references to these identifiers, in order to then either pull them from the fragment cache, or to run their code. The controller's responsibility is reduced to making changes to the database, and telling the root XML fragment object to render itself. The Question My question has two parts: Is this a good design? Are there any obvious flaws I'm missing? Has somebody else thought of this before? References? Is there an existing alternative that I should consider? A cool templating engine maybe?

  Read the article

• Why googling by keycaptcha gives results on reCAPTCHA? [closed]

  - by vgv8

  EDIT: I'd like to change this title to: How to STOP Google's manipulation of Google search engine presented to general public? I am frequently googling and more and more frequently bump when searching by one software product I am given instead the results on Google's own products. For ex., if I google by keyword keycaptcha for the "Past 24 hours" (after clicking on "Show search tools" -- "Past 24 hours" on the left sidebar of a browser) I am getting the Google's search results show only results on reCAPTCHA. Image uploaded later: Though, if confine keycaptcha in quotes the results are "correct" (well, kind of since they are still distorted in comparison with other search engines). I checked this during few months from different domains at different ISPs, different operating systems and from a dozen of browsers. The results are the same. Why is it and how can it be possibly corrected? My related posts: "How Gmail spam filter works?" IP adresses blacklisting Update: It is impossible for me to directly start using google.com as I am always redirected to google.ru (from google.com) by my ip-address "auto-detect location" google's "convenience". The google's help tells that it is impossible to switch off my location auto-detection because it is very helpful feature. There is a work-around to use google.com/ncr (to get google.com) (?anybody know what does it mean) to prevent redirection from google.com but even. But all results are exactly the same OK, I can search by quoted "keycaptcha", I am already accustomed to these google's quirks, but the question arises why the heck to burn time promoting someone's product if GOOGLE uses other product brands for showing its own interests/brands (reCAPTCHA) instead and what can be done with it? The general user will not understand that he was cheated and just will pick up the first (wrong) results Update2: Note that this googling behaviour: is independent on whether I am logged-in (or log-out-ed of) a google account, which account, on browser (I tried Opera, Chrome, FireFox, IE of different versions, Safari), OS or even domain; there are many such cases but I just targeted one concrete restricted example speciffically to to prevent wandering between unrelated details and peculiarities; @Michael, first it is not true and this text contains 2 links for real and significant results.. I also wrote that this is just one concrete example from many and based on many-month exp. These distortions happen upon clicking on: Past 24 hours, Past week, Past month, Past year in many other keywords, occasions/configurations of searches, etc. Second, the absence of the results is the result and there is no point to sneakingly substitute it by another unsolicited one. It is the definition of spam and scam. 3d, the question is not abt workarounds like how to write search queries or use another searching engines. The question is how to straighten the googling's results in order to stop disorienting general public about. Update: I could not understand: nobody reproduces the described by me behavior (i.e. when I click "Past 24 hours" link in google search searching for keycaptcha, the presented results are only on reCAPTCHA presented)? Update: And for the "Past week":

  Read the article

• Introduction to WebCenter Personalization: &ldquo;The Conductor&rdquo;

  - by Steve Pepper

  There are some new faces in the town of WebCenter with the latest 11g PS3 release.  A new component has introduced itself as "Oracle WebCenter Personalization", a.k.a WCP, to simplify delivery of a personalized experience and content to end users.  This posting reviews one of the primary components within WCP: "The Conductor". The Conductor: This ain't just an ordinary cloud... One of the founding principals behind WebCenter Personalization was to provide an open client-side API that remains independent of the technology invoking it, in addition to independence from the architecture running it.  The Conductor delivers this, and much, much more. The Conductor is the engine behind WebCenter Personalization that allows flow-based documents, called "Scenarios", to be managed and executed on the server-side through a well published and RESTful api.      The Conductor also supports an extensible model for custom provider integration that can be easily invoked within a Scenario to promote seamless integration with existing business assets. Introducing the Scenario Conductor Scenarios are declarative offline-authored documents using the custom Personalization JDeveloper bundle included with WebCenter.  A Scenario contains one (or more) statements that can: Create variables that are scoped to the current execution context Iterate over collections, or loop until a specific condition is met Execute one or more statements when a condition is met Invoke other scenarios that exist within the same namespace Invoke a data provider that integrates with custom applications Once a variable is assigned within the Scenario's execution context, it can be referenced anywhere within the same Scenario using the common Expression Language syntax used in J2EE web containers. Scenarios are then published and tested to the Integrated WebLogic Server domain, or published remotely to other domains running WebCenter Personalization. Various Client-side Models The Conductor server API is built upon RESTful services that support a wide variety of clients able to communicate over HTTP.  The Conductor supports the following client-side models: REST:  Popular browser-based languages can be used to manage and execute Conductor Scenarios.  There are other public methods to retrieve configured provider metadata that can be used by custom applications. The Conductor currently supports XML and JSON for it's API syntax. Java: WebCenter Personalization delivers a robust and light-weight java client with the popular Jersey framework as it's foundation.  It has never been easier to write a remote java client to manage remote RESTful services. Expression Language (EL): Allow the results of Scenario execution to control your user interface or embed personalized content using the session-scoped managed bean.  The EL client can also be used in straight JSP pages with minimal configuration. Extensible Provider Framework The Conductor supports a pluggable provider framework for integrating custom code with Scenario execution.  There are two types of providers supported by the Conductor: Function Provider: Function Providers are simple java annotated classes with static methods that are meant to be served as utilities.  Some common uses would include: object creation or instantiation, data transformation, and the like.  Function Providers can be invoked using the common EL syntax from variable assignments, conditions, and loops. For example:  ${myUtilityClass:doStuff(arg1,arg2))} If you are familiar with EL Functions, Function Providers are based on the same concept. Data Provider: Like Function Providers, Data Providers are annotated java classes, but they must adhere to a much more strict object model.  Data Providers have access to a wealth of Conductor services, such as: Access to namespace-scoped configuration API that can be managed by Oracle Enterprise Manager, Scenario execution context for expression resolution, and more.  Oracle ships with three out-of-the-box data providers that supports integration with: Standardized Content Servers(CMIS),  Federated Profile Properties through the Properties Service, and WebCenter Activity Graph. Useful References If you are looking to immediately get started writing your own application using WebCenter Personalization Services, you will find the following references helpful in getting you on your way: Personalizing WebCenter Applications Authoring Personalized Scenarios in JDeveloper Using Personalization APIs Externally Implementing and Calling Function Providers Implementing and Calling Data Providers

  Read the article

• Investigating on xVelocity (VertiPaq) column size

  - by Marco Russo (SQLBI)

    In January I published an article about how to optimize high cardinality columns in VertiPaq. In the meantime, VertiPaq has been rebranded to xVelocity: the official name is now “xVelocity in-memory analytics engine (VertiPaq)” but using xVelocity and VertiPaq when we talk about Analysis Services has the same meaning. In this post I’ll show how to investigate on columns size of an existing Tabular database so that you can find the most important columns to be optimized. A first approach can be looking in the DataDir of Analysis Services and look for the folder containing the database. Then, look for the biggest files in all subfolders and you will find the name of a file that contains the name of the most expensive column. However, this heuristic process is not very optimized. A better approach is using a DMV that provides the exact information. For example, by using the following query (open SSMS, open an MDX query on the database you are interested to and execute it) you will see all database objects sorted by used size in a descending way. SELECT * FROM $SYSTEM.DISCOVER_STORAGE_TABLE_COLUMN_SEGMENTS ORDER BY used_size DESC You can look at the first rows in order to understand what are the most expensive columns in your tabular model. The interesting data provided are: TABLE_ID: it is the name of the object – it can be also a dictionary or an index COLUMN_ID: it is the column name the object belongs to – you can also see ID_TO_POS and POS_TO_ID in case they refer to internal indexes RECORDS_COUNT: it is the number of rows in the column USED_SIZE: it is the used memory for the object By looking at the ration between USED_SIZE and RECORDS_COUNT you can understand what you can do in order to optimize your tabular model. Your options are: Remove the column. Yes, if it contains data you will never use in a query, simply remove the column from the tabular model Change granularity. If you are tracking time and you included milliseconds but seconds would be enough, round the data source column to the nearest second. If you have a floating point number but two decimals are good enough (i.e. the temperature), round the number to the nearest decimal is relevant to you. Split the column. Create two or more columns that have to be combined together in order to produce the original value. This technique is described in VertiPaq optimization article. Sort the table by that column. When you read the data source, you might consider sorting data by this column, so that the compression will be more efficient. However, this technique works better on columns that don’t have too many distinct values and you will probably move the problem to another column. Sorting data starting from the lower density columns (those with a few number of distinct values) and going to higher density columns (those with high cardinality) is the technique that provides the best compression ratio. After the optimization you should be able to reduce the used size and improve the count/size ration you measured before. If you are interested in a longer discussion about internal storage in VertiPaq and you want understand why this approach can save you space (and time), you can attend my 24 Hours of PASS session “VertiPaq Under the Hood” on March 21 at 08:00 GMT.

  Read the article

• Basic collision direction detection on 2d objects

  - by Osso Buko

  I am trying to develop a platform game for Android by using ANdroid GL Engine (ANGLE). And I am having trouble with collision detection. I have two objects which is shaped as rectangular. And no change in rotation. Here is a scheme of attributes of objects. What i am trying to do is when objects collide they block each other's movement on that direction. Every object has 4 boolean (bTop, bBottom, bRight, bLeft). For example when bBottom is true object can't advance on that direction. I came up with a solution but it seems it only works on one dimensional. Bottom and top or right and left. public void collisionPlatform (MyObject a, MyObject b) { // first obj is player and second is a wall or a platform Vector p1 = a.mPosition; // p1 = middle point of first object Vector d1 = a.mPosition2; // width(mX) and height of first object Vector mSpeed1 = a.mSpeed; // speed vector of first object Vector p2 = b.mPosition; // p1 = middle point of second object Vector d2 = b.mPosition2; // width(mX) and height of second object Vector mSpeed2 = b.mSpeed; // speed vector of second object float xDist, yDist; // distant between middle of two object float width , height; // this is average of two objects measurements width=(width1+width2)/2 xDist=(p1.mX - p2.mX); // calculate distance // if positive first object is at the right yDist=(p1.mY - p2.mY); // if positive first object is below width = d1.mX + d2.mX; // average measurements calculate height = d1.mY + d2.mY; width/=2; height/=2; if (Math.abs(xDist) < width && Math.abs(yDist) < height) { // Two object is collided if(p1.mY>p2.mY) { // first object is below second one a.bTop = true; if(a.mSpeed.mY<0) a.mSpeed.mY=0; b.bBottom = true; if(b.mSpeed.mY>0) b.mSpeed.mY=0; } else { a.bBottom = true; if(a.mSpeed.mY>0) a.mSpeed.mY=0; b.bTop = true; if(b.mSpeed.mY<0) b.mSpeed.mY=0; } } As seen in my code it simply will not work. when object comes from right or left it doesn't work. I tried couple of ways other than this one but none worked. I am guessing right method will include mSpeed vector. But I have no idea how to do it. I really appreciate if you could help. Sorry for my bad english.

  Read the article

• What Counts For a DBA – Depth

  - by Louis Davidson

  SQL Server offers very simple interfaces to many of its features. Most people could open up SSMS, connect to a server, write a simple query and see the results. Even several of the core DBA tasks are deceptively straightforward. It doesn’t take a rocket scientist to perform a basic database backup or run a trace (even using the newfangled Extended Events!). However, appearances can be deceptive, and often times it is really important that a DBA understands not just the basics of how to perform a task, but why we do a task, and how that task works. As an analogy, consider a child walking into a darkened room. Most would know that they need to turn on the light, and how to do it, so they flick the switch. But what happens if light fails to shine forth. Most would immediately tell you that you need to consider changing the light bulb. So you hop in the car and take them to the local home store and instruct them to buy a replacement. Confronted with a 40 foot display of light bulbs, how will they decide which of the hundreds of types of bulbs, of different types, fittings, shapes, colors, power and efficiency ratings, is the right choice? Obviously the main lesson the child is going to learn this day is how to use their cell phone as a flashlight so they don’t have to ask for help the next time. Likewise, when the metaphorical toddlers who use your database server have issues, they will instinctively know something is wrong, and may even have some idea what caused it, but will have no depth of knowledge to figure out the right solution. That is where the DBA comes in and attempts to save the day. However, when one looks beneath the shiny UI, SQL Server has its own “40 foot display of light bulbs”, in the form of the tremendous number of tools and the often-bewildering amount of information they can present to the DBA, to help us find issues. Unfortunately, resorting to guesswork, to trying different “bulbs” over and over, hoping to stumble on the answer. This is where the right depth of knowledge goes a long way. If we need to write a SELECT statement, then knowing the syntax and where to find the data is not enough. Knowledge of indexes and query plans is essential. Without it, we might hit on a query that “works”, but we are basically still a user, not a programmer, because we have no real control over our platform. Is that level of knowledge deep enough? Probably not, since knowledge of the underlying metadata and structures would be very useful in helping us make sense of any query plan. Understanding the structure of an index makes the “key lookup” operator not sound like what you do when someone tapes your car key to the ceiling. So is even this level of understanding deep enough? Do we need to understand the memory architecture used to process the query? It might be a comforting level of knowledge, and will doubtless come in handy at some point, but is not strictly necessary in most cases. Beyond that lies (more or less) full knowledge of SQL language and the intricacies of every step the SQL Server engine takes to process our query. My personal theory is that, as a professional, our knowledge of a given task should extend, at a minimum, one level deeper than is strictly necessary to perform the task. Anything deeper can be left to the ridiculously smart, or obsessive, or both. As an example. tasked with storing an integer value between 0 and 99999999, it’s essential that I know that choosing an Integer over Decimal(8,0) will likely offer performance benefits. It is then useful that I also understand the value of adding a CHECK constraint, to make sure the values are valid to the desired range; and comforting that I know a little about the underlying processors, registers and computer math. Anything further, I leave to the likes of Joe Chang, whose recent blog post on the topic offers depth by the bucketful!  

  Read the article

• What Counts for a DBA: Skill

  - by drsql

  “Practice makes perfect:” right? Well, not exactly. The reality of it all is that this saying is an untrustworthy aphorism. I discovered this in my “younger” days when I was a passionate tennis player, practicing and playing 20+ hours a week. No matter what my passion level was, without some serious coaching (and perhaps a change in dietary habits), my skill level was never going to rise to a level where I could make any money at the sport that involved something other than selling tennis balls at a sporting goods store. My game may have improved with all that practice but I had too many bad practices to overcome. Practice by itself merely reinforces what we know and what we can figure out naturally. The truth is actually closer to the expression used by Vince Lombardi: “Perfect practice makes perfect.” So how do you get to become skilled as a DBA if practice alone isn’t sufficient? Hit the Internet and start searching for SQL training and you can find 100 different sites. There are also hundreds of blogs, magazines, books, conferences both onsite and virtual. But then how do you know who is good? Unfortunately often the worst guide can be to find out the experience level of the writer. Some of the best DBAs are frighteningly young, and some got their start back when databases were stored on stacks of paper with little holes in it. As a programmer, is it really so hard to understand normalization? Set based theory? Query optimization? Indexing and performance tuning? The biggest barrier often is previous knowledge, particularly programming skills cultivated before you get started with SQL. In the world of technology, it is pretty rare that a fresh programmer will gravitate to database programming. Database programming is very unsexy work, because without a UI all you have are a bunch of text strings that you could never impress anyone with. Newbies spend most of their time building UIs or apps with procedural code in C# or VB scoring obvious interesting wins. Making matters worse is that SQL programming requires mastery of a much different toolset than most any mainstream programming skill. Instead of controlling everything yourself, most of the really difficult work is done by the internals of the engine (written by other non-relational programmers…we just can’t get away from them.) So is there a golden road to achieving a high skill level? Sadly, with tennis, I am pretty sure I’ll never discover it. However, with programming it seems to boil down to practice in applying the appropriate techniques for whatever type of programming you are doing. Can a C# programmer build a great database? As long as they don’t treat SQL like C#, absolutely. Same goes for a DBA writing C# code. None of this stuff is rocket science, as long as you learn to understand that different types of programming require different skill sets and you as a programmer must recognize the difference between one of the procedural languages and SQL and treat them differently. Skill comes from practicing doing things the right way and making “right” a habit.

  Read the article

• Access Control Lists for Roles

  - by Kyle Hatlestad

  Back in an earlier post, I wrote about how to enable entity security (access control lists, aka ACLs) for UCM 11g PS3.  Well, there was actually an additional security option that was included in that release but not fully supported yet (only for Fusion Applications).  It's the ability to define Roles as ACLs to entities (documents and folders).  But now in PS5, this security option is now fully supported.   The benefit of defining Roles for ACLs is that those user roles come from the enterprise security directory (e.g. OID, Active Directory, etc) and thus the WebCenter Content administrator does not need to define them like they do with ACL Groups (Aliases).  So it's a bit of best of both worlds.  Users are managed through the LDAP repository and are automatically granted/denied access through their group membership which are mapped to Roles in WCC.  A different way to think about it is being able to add multiple Accounts to content items...which I often get asked about.  Because LDAP groups can map to Accounts, there has always been this association between the LDAP groups and access to the entity in WCC.  But that mapping had to define the specific level of access (RWDA) and you could only apply one Account per content item or folder.  With Roles for ACLs, it basically takes away both of those restrictions by allowing users to define more then one Role and define the level of access on-the-fly. To turn on ACLs for Roles, there is a component to enable.  On the Component Manager page, click the 'advanced component manager' link in the description paragraph at the top.   In the list of Disabled Components, enable the RoleEntityACL component. Then restart.  This is assuming the other configuration settings have been made for the other ACLs in the earlier post.   Once enabled, a new metadata field called xClbraRoleList will be created.  If you are using OracleTextSearch as the search indexer, be sure to run a Fast Rebuild on the collection. For Users and Groups, these values are automatically picked up from the corresponding database tables.  In the case of Roles, there is an explicitly defined list of choices that are made available.  These values must match the roles that are coming from the enterprise security repository. To add these values, go to Administration -> Admin Applets -> Configuration Manager.  On the Views tab, edit the values for the ExternalRolesView.  By default, 'guest' and 'authenticated' are added.  Once added, you can assign the roles to your content or folder. If you are a user that can both access the Security Group for that item and you belong to that particular Role, you now have access to that item.  If you don't belong to that Role, you won't! [Extra] Because the selection mechanism for the list is using a type-ahead field, users may not even know the possible choices to start typing to.  To help them, one thing you can add to the form is a placeholder field which offers the entire list of roles as an option list they can scroll through (assuming its a manageable size)  and view to know what to type to.  By being a placeholder field, it won't need to be added to the custom metadata database table or search engine.  

  Read the article

• XNA - 3D AABB collision detection and response

  - by fastinvsqrt

  I've been fiddling around with 3D AABB collision in my voxel engine for the last couple of days, and every method I've come up with thus far has been almost correct, but each one never quite worked exactly the way I hoped it would. Currently what I do is get two bounding boxes for my entity, one modified by the X translation component and the other by the Z component, and check if each collides with any of the surrounding chunks (chunks have their own octrees that are populated only with blocks that support collision). If there is a collision, then I cast out rays into that chunk to get the shortest collision distance, and set the translation component to that distance if the component is greater than the distance. The problem is that sometimes collisions aren't even registered. Here's a video on YouTube that I created showing what I mean. I suspect the problem may be with the rays that I cast to get the collision distance not being where I think they are, but I'm not entirely sure what would be wrong with them if they are indeed the problem. Here is my code for collision detection and response in the X direction (the Z direction is basically the same): // create the XZ offset vector Vector3 offsXZ = new Vector3( ( _translation.X > 0.0f ) ? SizeX / 2.0f : ( _translation.X < 0.0f ) ? -SizeX / 2.0f : 0.0f, 0.0f, ( _translation.Z > 0.0f ) ? SizeZ / 2.0f : ( _translation.Z < 0.0f ) ? -SizeZ / 2.0f : 0.0f ); // X physics BoundingBox boxx = GetBounds( _translation.X, 0.0f, 0.0f ); if ( _translation.X > 0.0f ) { foreach ( Chunk chunk in surrounding ) { if ( chunk.Collides( boxx ) ) { float dist = GetShortestCollisionDistance( chunk, Vector3.Right, offsXZ ) - 0.0001f; if ( dist < _translation.X ) { _translation.X = dist; } } } } else if ( _translation.X < 0.0f ) { foreach ( Chunk chunk in surrounding ) { if ( chunk.Collides( boxx ) ) { float dist = GetShortestCollisionDistance( chunk, Vector3.Left, offsXZ ) - 0.0001f; if ( dist < -_translation.X ) { _translation.X = -dist; } } } } And here is my implementation for GetShortestCollisionDistance: private float GetShortestCollisionDistance( Chunk chunk, Vector3 rayDir, Vector3 offs ) { int startY = (int)( -SizeY / 2.0f ); int endY = (int)( SizeY / 2.0f ); int incY = (int)Cube.Size; float dist = Chunk.Size; for ( int y = startY; y <= endY; y += incY ) { // Position is the center of the entity's bounding box Ray ray = new Ray( new Vector3( Position.X + offs.X, Position.Y + offs.Y + y, Position.Z + offs.Z ), rayDir ); // Chunk.GetIntersections(Ray) returns Dictionary<Block, float?> foreach ( var pair in chunk.GetIntersections( ray ) ) { if ( pair.Value.HasValue && pair.Value.Value < dist ) { dist = pair.Value.Value; } } } return dist; } I realize some of this code can be consolidated to help with speed, but my main concern right now is to get this bit of physics programming to actually work.

  Read the article

• On a BPM Mission with Process Accelerators. Part 1: BPM as an ATV

  - by Cesare Rotundo

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Part 1: BPM as an ATV It’s always exciting to talk to customers that are in the middle of a BPM transformational journey. Their thirst for new processes to improve with BPM makes them explorers in a landscape of opportunities. They have discovered that with BPM the can “go places” they couldn’t reach before. In a way, learning how to generate value with BPM is like adopting a new mean of transportation. Apps are like regular cars: very efficient, but to be used on paved roads: the road/process has been traced, and there are fixed paths to follow to get from “opportunity to quote” or from “quote to cash”. Getting off the road is risky, and laying down new asphalt is slow and expensive. Custom development is like running: you can go virtually anywhere, following any path you like, yet it’s slow, and a lot of sweat. BPM allows you to go “off the beaten path” laid out by packaged apps, yet make fast progress compared to custom development. BPM is therefore more like an All-Terrain Vehicle (ATV): less efficient than a car, but much faster than running, with a powerful enough engine that can get you places. The similarities between BPM and ATVs don’t stop here: you must learn to ride it even if you already know how to drive a car; you can reach places but figuring out the path to your destination is harder. Ultimately, with BPM as with an ATV, you reach places that you thought you could never reach, and you discover new destinations that provide great benefit to you … and that you didn’t even know existed! That’s where the sense of accomplishment that we heard from our BPM customers comes from, as well as the desire to share their experience, or even, as in the case of a County, the willingness to contribute their BPM solutions to help other agencies that face the same challenges. The question we wanted to answer is how can we teach organizations to drive ATV/BPM, thus leading them to deeper success with BPM, while increasing their awareness of the potential for reaching new targets, and finally equip them with the right tools. Like with ATVs, getting from point A to point B is more of a work of art than cruising on the highway by car. There is a lot we can do: after all many sought after destinations are common: someone else has been on the same path before. If only you could learn from their experience …

  Read the article

• Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there?

  - by jasonspiro

  A client of my IT-consulting service owns a web-development shop. He's been having problems with a Slackware 12.0 server running MySQL 5.0.67. The machine was set up by the client's sysadmin, who left on bad terms. My client no longer employs a sysadmin. As far as I can tell, the only copy of MySQL that's installed is the one described in /var/log/packages/mysql-5.0.67-i486-1: PACKAGE NAME: mysql-5.0.67-i486-1 COMPRESSED PACKAGE SIZE: 16828 K UNCOMPRESSED PACKAGE SIZE: 33840 K PACKAGE LOCATION: /var/slapt-get/archives/./slackware/ap/mysql-5.0.67-i486-1.tgz PACKAGE DESCRIPTION: mysql: mysql (SQL-based relational database server) mysql: mysql: MySQL is a fast, multi-threaded, multi-user, and robust SQL mysql: (Structured Query Language) database server. It comes with a nice API mysql: which makes it easy to integrate into other applications. mysql: mysql: The home page for MySQL is http://www.mysql.com/ mysql: mysql: mysql: mysql: FILE LIST: ./ var/ var/lib/ var/lib/mysql/ var/run/ var/run/mysql/ install/ install/doinst.sh install/slack-desc usr/ usr/include/ usr/include/mysql/ usr/include/mysql/my_alloc.h usr/include/mysql/sql_common.h usr/include/mysql/my_dbug.h usr/include/mysql/errmsg.h usr/include/mysql/my_pthread.h usr/include/mysql/my_list.h usr/include/mysql/mysql.h usr/include/mysql/sslopt-vars.h usr/include/mysql/my_config.h usr/include/mysql/mysql_com.h usr/include/mysql/m_string.h usr/include/mysql/sslopt-case.h usr/include/mysql/my_xml.h usr/include/mysql/sql_state.h usr/include/mysql/my_global.h usr/include/mysql/my_sys.h usr/include/mysql/mysqld_ername.h usr/include/mysql/mysqld_error.h usr/include/mysql/sslopt-longopts.h usr/include/mysql/keycache.h usr/include/mysql/my_net.h usr/include/mysql/mysql_version.h usr/include/mysql/my_no_pthread.h usr/include/mysql/decimal.h usr/include/mysql/readline.h usr/include/mysql/my_attribute.h usr/include/mysql/typelib.h usr/include/mysql/my_dir.h usr/include/mysql/raid.h usr/include/mysql/m_ctype.h usr/include/mysql/mysql_embed.h usr/include/mysql/mysql_time.h usr/include/mysql/my_getopt.h usr/lib/ usr/lib/mysql/ usr/lib/mysql/libmysqlclient_r.so.15.0.0 usr/lib/mysql/libmysqlclient_r.la usr/lib/mysql/libmyisammrg.a usr/lib/mysql/libmystrings.a usr/lib/mysql/libmyisam.a usr/lib/mysql/libmysqlclient.so.15.0.0 usr/lib/mysql/libmysqlclient_r.a usr/lib/mysql/libmysqlclient.a usr/lib/mysql/libheap.a usr/lib/mysql/libvio.a usr/lib/mysql/libmysqlclient.la usr/lib/mysql/libmysys.a usr/lib/mysql/libdbug.a usr/bin/ usr/bin/comp_err usr/bin/my_print_defaults usr/bin/resolve_stack_dump usr/bin/msql2mysql usr/bin/mysqltestmanager-pwgen usr/bin/myisampack usr/bin/replace usr/bin/mysqld_multi usr/bin/mysqlaccess usr/bin/mysql_install_db usr/bin/innochecksum usr/bin/myisam_ftdump usr/bin/mysqlcheck usr/bin/mysqltest usr/bin/mysql_upgrade_shell usr/bin/mysql_secure_installation usr/bin/mysql_fix_extensions usr/bin/mysqld_safe usr/bin/mysql_explain_log usr/bin/mysqlimport usr/bin/myisamlog usr/bin/mysql_tzinfo_to_sql usr/bin/mysql_upgrade usr/bin/mysqltestmanager usr/bin/mysql_fix_privilege_tables usr/bin/mysql_find_rows usr/bin/mysql_convert_table_format usr/bin/mysqltestmanagerc usr/bin/mysqlhotcopy usr/bin/mysqldump usr/bin/mysqlshow usr/bin/mysqlbug usr/bin/mysql_config usr/bin/mysqldumpslow usr/bin/mysql_waitpid usr/bin/mysqlbinlog usr/bin/mysql_client_test usr/bin/perror usr/bin/mysql usr/bin/myisamchk usr/bin/mysql_setpermission usr/bin/mysqladmin usr/bin/mysql_zap usr/bin/mysql_tableinfo usr/bin/resolveip usr/share/ usr/share/mysql/ usr/share/mysql/errmsg.txt usr/share/mysql/swedish/ usr/share/mysql/swedish/errmsg.sys usr/share/mysql/mysql_system_tables_data.sql usr/share/mysql/mysql.server usr/share/mysql/hungarian/ usr/share/mysql/hungarian/errmsg.sys usr/share/mysql/norwegian/ usr/share/mysql/norwegian/errmsg.sys usr/share/mysql/slovak/ usr/share/mysql/slovak/errmsg.sys usr/share/mysql/spanish/ usr/share/mysql/spanish/errmsg.sys usr/share/mysql/polish/ usr/share/mysql/polish/errmsg.sys usr/share/mysql/ukrainian/ usr/share/mysql/ukrainian/errmsg.sys usr/share/mysql/danish/ usr/share/mysql/danish/errmsg.sys usr/share/mysql/romanian/ usr/share/mysql/romanian/errmsg.sys usr/share/mysql/english/ usr/share/mysql/english/errmsg.sys usr/share/mysql/charsets/ usr/share/mysql/charsets/latin2.xml usr/share/mysql/charsets/greek.xml usr/share/mysql/charsets/koi8r.xml usr/share/mysql/charsets/latin1.xml usr/share/mysql/charsets/cp866.xml usr/share/mysql/charsets/geostd8.xml usr/share/mysql/charsets/cp1250.xml usr/share/mysql/charsets/koi8u.xml usr/share/mysql/charsets/cp852.xml usr/share/mysql/charsets/hebrew.xml usr/share/mysql/charsets/latin7.xml usr/share/mysql/charsets/README usr/share/mysql/charsets/ascii.xml usr/share/mysql/charsets/cp1251.xml usr/share/mysql/charsets/macce.xml usr/share/mysql/charsets/latin5.xml usr/share/mysql/charsets/Index.xml usr/share/mysql/charsets/macroman.xml usr/share/mysql/charsets/cp1256.xml usr/share/mysql/charsets/keybcs2.xml usr/share/mysql/charsets/swe7.xml usr/share/mysql/charsets/armscii8.xml usr/share/mysql/charsets/dec8.xml usr/share/mysql/charsets/cp1257.xml usr/share/mysql/charsets/hp8.xml usr/share/mysql/charsets/cp850.xml usr/share/mysql/korean/ usr/share/mysql/korean/errmsg.sys usr/share/mysql/german/ usr/share/mysql/german/errmsg.sys usr/share/mysql/mi_test_all.res usr/share/mysql/greek/ usr/share/mysql/greek/errmsg.sys usr/share/mysql/french/ usr/share/mysql/french/errmsg.sys usr/share/mysql/mysql_fix_privilege_tables.sql usr/share/mysql/dutch/ usr/share/mysql/dutch/errmsg.sys usr/share/mysql/serbian/ usr/share/mysql/serbian/errmsg.sys usr/share/mysql/mysql_system_tables.sql usr/share/mysql/my-huge.cnf usr/share/mysql/portuguese/ usr/share/mysql/portuguese/errmsg.sys usr/share/mysql/japanese/ usr/share/mysql/japanese/errmsg.sys usr/share/mysql/mysql_test_data_timezone.sql usr/share/mysql/russian/ usr/share/mysql/russian/errmsg.sys usr/share/mysql/czech/ usr/share/mysql/czech/errmsg.sys usr/share/mysql/fill_help_tables.sql usr/share/mysql/estonian/ usr/share/mysql/estonian/errmsg.sys usr/share/mysql/my-medium.cnf usr/share/mysql/norwegian-ny/ usr/share/mysql/norwegian-ny/errmsg.sys usr/share/mysql/my-small.cnf usr/share/mysql/mysql-log-rotate usr/share/mysql/italian/ usr/share/mysql/italian/errmsg.sys usr/share/mysql/my-large.cnf usr/share/mysql/ndb-config-2-node.ini usr/share/mysql/binary-configure usr/share/mysql/mi_test_all usr/share/mysql/mysqld_multi.server usr/share/mysql/my-innodb-heavy-4G.cnf usr/doc/ usr/doc/mysql-5.0.67/ usr/doc/mysql-5.0.67/README usr/doc/mysql-5.0.67/Docs/ usr/doc/mysql-5.0.67/Docs/INSTALL-BINARY usr/doc/mysql-5.0.67/COPYING usr/info/ usr/info/mysql.info.gz usr/libexec/ usr/libexec/mysqld usr/libexec/mysqlmanager usr/man/ usr/man/man8/ usr/man/man8/mysqlmanager.8.gz usr/man/man8/mysqld.8.gz usr/man/man1/ usr/man/man1/mysql_zap.1.gz usr/man/man1/mysql_setpermission.1.gz usr/man/man1/mysql_tzinfo_to_sql.1.gz usr/man/man1/msql2mysql.1.gz usr/man/man1/mysql_tableinfo.1.gz usr/man/man1/mysql_explain_log.1.gz usr/man/man1/mysqlcheck.1.gz usr/man/man1/comp_err.1.gz usr/man/man1/my_print_defaults.1.gz usr/man/man1/mysqlbinlog.1.gz usr/man/man1/myisam_ftdump.1.gz usr/man/man1/mysql_upgrade.1.gz usr/man/man1/mysql.1.gz usr/man/man1/mysql_client_test.1.gz usr/man/man1/resolve_stack_dump.1.gz usr/man/man1/mysql_fix_extensions.1.gz usr/man/man1/mysqlmanagerc.1.gz usr/man/man1/mysql_config.1.gz usr/man/man1/mysqlshow.1.gz usr/man/man1/myisamlog.1.gz usr/man/man1/replace.1.gz usr/man/man1/mysqlmanager-pwgen.1.gz usr/man/man1/mysqltest.1.gz usr/man/man1/innochecksum.1.gz usr/man/man1/mysqladmin.1.gz usr/man/man1/perror.1.gz usr/man/man1/mysql_waitpid.1.gz usr/man/man1/mysql_convert_table_format.1.gz usr/man/man1/mysqlman.1.gz usr/man/man1/mysqlimport.1.gz usr/man/man1/mysqlbug.1.gz usr/man/man1/mysql_find_rows.1.gz usr/man/man1/myisampack.1.gz usr/man/man1/myisamchk.1.gz usr/man/man1/mysql_fix_privilege_tables.1.gz usr/man/man1/mysql-stress-test.pl.1.gz usr/man/man1/resolveip.1.gz usr/man/man1/make_win_bin_dist.1.gz usr/man/man1/mysqlhotcopy.1.gz usr/man/man1/mysqld_multi.1.gz usr/man/man1/safe_mysqld.1.gz usr/man/man1/mysql_secure_installation.1.gz usr/man/man1/mysql_install_db.1.gz usr/man/man1/mysqldump.1.gz usr/man/man1/mysql-test-run.pl.1.gz usr/man/man1/mysqld_safe.1.gz usr/man/man1/mysqlaccess.1.gz usr/man/man1/mysql.server.1.gz usr/man/man1/make_win_src_distribution.1.gz etc/ etc/rc.d/ etc/rc.d/rc.mysqld.new etc/my-huge.cnf etc/my-medium.cnf etc/my-small.cnf etc/my-large.cnf /etc/rc.d/rc.mysqld is an ordinary Slackware-type start/stop script: #!/bin/sh # Start/stop/restart mysqld. # # Copyright 2003 Patrick J. Volkerding, Concord, CA # Copyright 2003 Slackware Linux, Inc., Concord, CA # # This program comes with NO WARRANTY, to the extent permitted by law. # You may redistribute copies of this program under the terms of the # GNU General Public License. # To start MySQL automatically at boot, be sure this script is executable: # chmod 755 /etc/rc.d/rc.mysqld # Before you can run MySQL, you must have a database. To install an initial # database, do this as root: # # su - mysql # mysql_install_db # # Note that step one is becoming the mysql user. It's important to do this # before making any changes to the database, or mysqld won't be able to write # to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql'). # To allow outside connections to the database comment out the next line. # If you don't need incoming network connections, then leave the line # uncommented to improve system security. #SKIP="--skip-networking" # Start mysqld: mysqld_start() { if [ -x /usr/bin/mysqld_safe ]; then # If there is an old PID file (no mysqld running), clean it up: if [ -r /var/run/mysql/mysql.pid ]; then if ! ps axc | grep mysqld 1> /dev/null 2> /dev/null ; then echo "Cleaning up old /var/run/mysql/mysql.pid." rm -f /var/run/mysql/mysql.pid fi fi /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP & fi } # Stop mysqld: mysqld_stop() { # If there is no PID file, ignore this request... if [ -r /var/run/mysql/mysql.pid ]; then killall mysqld # Wait at least one minute for it to exit, as we don't know how big the DB is... for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do if [ ! -r /var/run/mysql/mysql.pid ]; then break; fi sleep 1 done if [ "$second" = "60" ]; then echo "WARNING: Gave up waiting for mysqld to exit!" sleep 15 fi fi } # Restart mysqld: mysqld_restart() { mysqld_stop mysqld_start } case "$1" in 'start') mysqld_start ;; 'stop') mysqld_stop ;; 'restart') mysqld_restart ;; *) echo "usage $0 start|stop|restart" esac But there's also an unexpected init script on the machine, named /etc/init.d/mysql: #!/bin/sh # Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB # This file is public domain and comes with NO WARRANTY of any kind # MySQL daemon start/stop script. # Usually this is put in /etc/init.d (at least on machines SYSV R4 based # systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql. # When this is done the mysql server will be started when the machine is # started and shut down when the systems goes down. # Comments to support chkconfig on RedHat Linux # chkconfig: 2345 64 36 # description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions ### BEGIN INIT INFO # Provides: mysql # Required-Start: $local_fs $network $remote_fs # Should-Start: ypbind nscd ldap ntpd xntpd # Required-Stop: $local_fs $network $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop MySQL # Description: MySQL is a very fast and reliable SQL database engine. ### END INIT INFO # If you install MySQL on some other places than /usr, then you # have to do one of the following things for this script to work: # # - Run this script from within the MySQL installation directory # - Create a /etc/my.cnf file with the following information: # [mysqld] # basedir=<path-to-mysql-installation-directory> # - Add the above to any other configuration file (for example ~/.my.ini) # and copy my_print_defaults to /usr/bin # - Add the path to the mysql-installation-directory to the basedir variable # below. # # If you want to affect other MySQL variables, you should make your changes # in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files. # If you change base dir, you must also change datadir. These may get # overwritten by settings in the MySQL configuration files. #basedir= #datadir= # Default value, in seconds, afterwhich the script should timeout waiting # for server start. # Value here is overriden by value in my.cnf. # 0 means don't wait at all # Negative numbers mean to wait indefinitely service_startup_timeout=900 # The following variables are only set for letting mysql.server find things. # Set some defaults pid_file=/var/run/mysql/mysql.pid server_pid_file=/var/run/mysql/mysql.pid use_mysqld_safe=1 user=mysql if test -z "$basedir" then basedir=/usr bindir=/usr/bin if test -z "$datadir" then datadir=/var/lib/mysql fi sbindir=/usr/sbin libexecdir=/usr/libexec else bindir="$basedir/bin" if test -z "$datadir" then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" fi # datadir_set is used to determine if datadir was set (and so should be # *not* set inside of the --basedir= handler.) datadir_set= # # Use LSB init script functions for printing messages, if possible # lsb_functions="/lib/lsb/init-functions" if test -f $lsb_functions ; then . $lsb_functions else log_success_msg() { echo " SUCCESS! $@" } log_failure_msg() { echo " ERROR! $@" } fi PATH=/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin export PATH mode=$1 # start or stop shift other_args="$*" # uncommon, but needed when called from an RPM upgrade action # Expected: "--skip-networking --skip-grant-tables" # They are not checked here, intentionally, as it is the resposibility # of the "spec" file author to give correct arguments only. case `echo "testing\c"`,`echo -n testing` in *c*,-n*) echo_n= echo_c= ;; *c*,*) echo_n=-n echo_c= ;; *) echo_n= echo_c='\c' ;; esac parse_server_arguments() { for arg do case "$arg" in --basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'` bindir="$basedir/bin" if test -z "$datadir_set"; then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" ;; --datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'` datadir_set=1 ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --pid-file=*) server_pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --use-mysqld_safe) use_mysqld_safe=1;; --use-manager) use_mysqld_safe=0;; esac done } parse_manager_arguments() { for arg do case "$arg" in --pid-file=*) pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; esac done } wait_for_pid () { verb="$1" manager_pid="$2" # process ID of the program operating on the pid-file i=0 avoid_race_condition="by checking again" while test $i -ne $service_startup_timeout ; do case "$verb" in 'created') # wait for a PID-file to pop into existence. test -s $pid_file && i='' && break ;; 'removed') # wait for this PID-file to disappear test ! -s $pid_file && i='' && break ;; *) echo "wait_for_pid () usage: wait_for_pid created|removed manager_pid" exit 1 ;; esac # if manager isn't running, then pid-file will never be updated if test -n "$manager_pid"; then if kill -0 "$manager_pid" 2>/dev/null; then : # the manager still runs else # The manager may have exited between the last pid-file check and now. if test -n "$avoid_race_condition"; then avoid_race_condition="" continue # Check again. fi # there's nothing that will affect the file. log_failure_msg "Manager of pid-file quit without updating file." return 1 # not waiting any more. fi fi echo $echo_n ".$echo_c" i=`expr $i + 1` sleep 1 done if test -z "$i" ; then log_success_msg return 0 else log_failure_msg return 1 fi } # Get arguments from the my.cnf file, # the only group, which is read from now on is [mysqld] if test -x ./bin/my_print_defaults then print_defaults="./bin/my_print_defaults" elif test -x $bindir/my_print_defaults then print_defaults="$bindir/my_print_defaults" elif test -x $bindir/mysql_print_defaults then print_defaults="$bindir/mysql_print_defaults" else # Try to find basedir in /etc/my.cnf conf=/etc/my.cnf print_defaults= if test -r $conf then subpat='^[^=]*basedir[^=]*=\(.*\)$' dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf` for d in $dirs do d=`echo $d | sed -e 's/[ ]//g'` if test -x "$d/bin/my_print_defaults" then print_defaults="$d/bin/my_print_defaults" break fi if test -x "$d/bin/mysql_print_defaults" then print_defaults="$d/bin/mysql_print_defaults" break fi done fi # Hope it's in the PATH ... but I doubt it test -z "$print_defaults" && print_defaults="my_print_defaults" fi # # Read defaults file from 'basedir'. If there is no defaults file there # check if it's in the old (depricated) place (datadir) and read it from there # extra_args="" if test -r "$basedir/my.cnf" then extra_args="-e $basedir/my.cnf" else if test -r "$datadir/my.cnf" then extra_args="-e $datadir/my.cnf" fi fi parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server` # Look for the pidfile parse_manager_arguments `$print_defaults $extra_args manager` # # Set pid file if not given # if test -z "$pid_file" then pid_file=$datadir/mysqlmanager-`/bin/hostname`.pid else case "$pid_file" in /* ) ;; * ) pid_file="$datadir/$pid_file" ;; esac fi if test -z "$server_pid_file" then server_pid_file=$datadir/`/bin/hostname`.pid else case "$server_pid_file" in /* ) ;; * ) server_pid_file="$datadir/$server_pid_file" ;; esac fi case "$mode" in 'start') # Start daemon # Safeguard (relative paths, core dumps..) cd $basedir manager=$bindir/mysqlmanager if test -x $libexecdir/mysqlmanager then manager=$libexecdir/mysqlmanager elif test -x $sbindir/mysqlmanager then manager=$sbindir/mysqlmanager fi echo $echo_n "Starting MySQL" if test -x $manager -a "$use_mysqld_safe" = "0" then if test -n "$other_args" then log_failure_msg "MySQL manager does not support options '$other_args'" exit 1 fi # Give extra arguments to mysqld with the my.cnf file. This script may # be overwritten at next upgrade. $manager --user=$user --pid-file=$pid_file >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysqlmanager fi exit $return_value elif test -x $bindir/mysqld_safe then # Give extra arguments to mysqld with the my.cnf file. This script # may be overwritten at next upgrade. pid_file=$server_pid_file $bindir/mysqld_safe --datadir=$datadir --pid-file=$server_pid_file $other_args >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysql fi exit $return_value else log_failure_msg "Couldn't find MySQL manager ($manager) or server ($bindir/mysqld_safe)" fi ;; 'stop') # Stop daemon. We use a signal here to avoid having to know the # root password. # The RedHat / SuSE lock directory to remove lock_dir=/var/lock/subsys/mysqlmanager # If the manager pid_file doesn't exist, try the server's if test ! -s "$pid_file" then pid_file=$server_pid_file lock_dir=/var/lock/subsys/mysql fi if test -s "$pid_file" then mysqlmanager_pid=`cat $pid_file` echo $echo_n "Shutting down MySQL" kill $mysqlmanager_pid # mysqlmanager should remove the pid_file when it exits, so wait for it. wait_for_pid removed "$mysqlmanager_pid"; return_value=$? # delete lock for RedHat / SuSE if test -f $lock_dir then rm -f $lock_dir fi exit $return_value else log_failure_msg "MySQL manager or server PID file could not be found!" fi ;; 'restart') # Stop the service and regardless of whether it was # running or not, start it again. if $0 stop $other_args; then $0 start $other_args else log_failure_msg "Failed to stop running server, so refusing to try to start." exit 1 fi ;; 'reload'|'force-reload') if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL" touch $server_pid_file else log_failure_msg "MySQL PID file could not be found!" exit 1 fi ;; 'status') # First, check to see if pid file exists if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file if kill -0 $mysqld_pid 2>/dev/null ; then log_success_msg "MySQL running ($mysqld_pid)" exit 0 else log_failure_msg "MySQL is not running, but PID file exists" exit 1 fi else # Try to find appropriate mysqld process mysqld_pid=`pidof $sbindir/mysqld` if test -z $mysqld_pid ; then if test "$use_mysqld_safe" = "0" ; then lockfile=/var/lock/subsys/mysqlmanager else lockfile=/var/lock/subsys/mysql fi if test -f $lockfile ; then log_failure_msg "MySQL is not running, but lock exists" exit 2 fi log_failure_msg "MySQL is not running" exit 3 else log_failure_msg "MySQL is running but PID file could not be found" exit 4 fi fi ;; *) # usage echo "Usage: $0 {start|stop|restart|reload|force-reload|status} [ MySQL server options ]" exit 1 ;; esac exit 0 An unimportant aside: The previous users of the machine kept a messy home directory. Their home directory was /root. I've pasted a copy at http://www.pastebin.ca/2167496. My question: Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there? P.S. This question is far from perfect. Please feel free to edit it.

  Read the article

• Installing Zend on CentOS is having dependency issues

  - by rax

  I'm trying to install PHP's Zend Server on my CentOS VPS but it's having dependency issues that I can't seem to resolve. zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) knowledgetree-ce-3.7.0-2.noarch from KTnoarch has depsolving problems --> Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) zend-server-php-5.2-4.0-73.noarch from Zend_noarch has depsolving problems --> Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-fileinfo-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-xmlrpc-zend-server is needed by package knowledgetree-ce-3.7.0-2.noarch (KTnoarch) Error: Missing Dependency: php-5.2-gui-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-common-extensions-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-dev-zend-server is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) Error: Missing Dependency: php-5.2-zend-extensions is needed by package zend-server-php-5.2-4.0-73.noarch (Zend_noarch) When consulting the Google, all I get told is how to install PHP 5.2.* on CentOS. According to the output of php -v, I've done that. PHP 5.2.8 (cli) (built: Sep 28 2009 15:37:15) Copyright (c) 1997-2008 The PHP Group Zend Engine v2.2.0, Copyright (c) 1998-2008 Zend Technologies with the ionCube PHP Loader v3.1.34, Copyright (c) 2002-2009, by ionCube Ltd. How can I solve this issue?

  Read the article

• Oracle 9i Session Disconnections

  - by mlaverd

  I am in a development environment, and our test Oracle 9i server has been misbehaving for a few days now. What happens is that we have our JDBC connections disconnecting after a few successful connections. We got this box set up by our IT department and handed over to. It is 'our problem', so options like 'ask you DBA' isn't going to help me. :( Our server is set up with 3 plain databases (one is the main dev db, the other is the 'experimental' dev db). We use the Oracle 10 ojdbc14.jar thin JDBC driver (because of some bug in the version 9 of the driver). We're using Hibernate to talk to the DB. The only thing that I can see that changed is that we now have more users connecting to the server. Instead of one developer, we now have 3. With the Hibernate connection pools, I'm thinking that maybe we're hitting some limit? Anyone has any idea what's going on? Here's the stack trace on the client: Caused by: org.hibernate.exception.GenericJDBCException: could not execute query at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:126) [hibernate3.jar:na] at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:114) [hibernate3.jar:na] at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66) [hibernate3.jar:na] at org.hibernate.loader.Loader.doList(Loader.java:2235) [hibernate3.jar:na] at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2129) [hibernate3.jar:na] at org.hibernate.loader.Loader.list(Loader.java:2124) [hibernate3.jar:na] at org.hibernate.loader.hql.QueryLoader.list(QueryLoader.java:401) [hibernate3.jar:na] at org.hibernate.hql.ast.QueryTranslatorImpl.list(QueryTranslatorImpl.java:363) [hibernate3.jar:na] at org.hibernate.engine.query.HQLQueryPlan.performList(HQLQueryPlan.java:196) [hibernate3.jar:na] at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1149) [hibernate3.jar:na] at org.hibernate.impl.QueryImpl.list(QueryImpl.java:102) [hibernate3.jar:na] ... Caused by: java.sql.SQLException: Io exception: Connection reset at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:829) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1049) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.T4CPreparedStatement.executeMaybeDescribe(T4CPreparedStatement.java:854) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1154) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3370) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3415) [ojdbc14.jar:Oracle JDBC Driver version - "10.2.0.4.0"] at org.hibernate.jdbc.AbstractBatcher.getResultSet(AbstractBatcher.java:208) [hibernate3.jar:na] at org.hibernate.loader.Loader.getResultSet(Loader.java:1812) [hibernate3.jar:na] at org.hibernate.loader.Loader.doQuery(Loader.java:697) [hibernate3.jar:na] at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:259) [hibernate3.jar:na] at org.hibernate.loader.Loader.doList(Loader.java:2232) [hibernate3.jar:na]

  Read the article

• nginx proxypass content 404s when adding caching location block

  - by Thermionix

  Below is my nginx conf - the location block for adding expires max to content is causing issues with content from the /internal proxied sites. nginx error log; 2011/11/22 15:51:23 [error] 22124#0: *2 open() "/var/www/internal/static/javascripts/lib.js" failed (2: No such file or directory), client: 127.0.0.1, server: example.com, request: "GET /internal/static/javascripts/lib.js?0.6.11RC1 HTTP/1.1", host: "example.com", referrer: "https://example.com/internal/" browser error; lib.js Failed to load resource: the server responded with a status of 404 (Not Found) commenting out the expires max location block allows the proxied sites to work as intended. Config files; proxy.conf location /internal { proxy_pass http://localhost:10001/internal/; include proxy.inc; } .... more entries .... sites-enabled/main server { listen 80; include www.conf; } server { listen 443; include proxy.conf; include www.conf; ssl on; } www.conf root /var/www; server_name example.com; location / { autoindex off; allow all; rewrite ^/$ /mainsite last; } location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { expires max; } # hide protected files location ~* \.(engine|inc|info|install|module|profile|po|sh|.*sql|theme|tpl(\.php)?|xtmpl)$|^(code-style\.pl|Entries.*|Repository|Root|Tag|Template)$ { deny all; } location ~ \.php$ { fastcgi_index index.php; include fastcgi_params; if (-f $request_filename) { fastcgi_pass 127.0.0.1:9000; } } proxy.inc proxy_connect_timeout 59s; proxy_send_timeout 600; proxy_read_timeout 600; proxy_buffer_size 64k; proxy_buffers 16 32k; proxy_pass_header Set-Cookie; proxy_redirect off; proxy_hide_header Vary; proxy_busy_buffers_size 64k; proxy_temp_file_write_size 64k; proxy_set_header Accept-Encoding ''; proxy_ignore_headers Cache-Control Expires; proxy_set_header Referer $http_referer; proxy_set_header Host $host; proxy_set_header Cookie $http_cookie; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-Host $host; proxy_set_header X-Forwarded-Server $host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;

  Read the article

• installed openstack using devstack install shell script but getting 500 error when i try opening dashboard

  - by Arvind

  I followed the instructions at http://devstack.org/guides/single-machine.html to install OpenStack. I first installed Ubuntu on my Windows 7 PC using the officially supported Windows installer for Ubuntu 12.04 LTS. And after that I followed the instructions at above page to install OpenStack. As per instructions, I should be able to access the dashboard aka Horizon, at http://192.168.1.4/ (thats the IP of the PC on which I installed Ubuntu-OpenStack). However I am getting a 500 error web page when I open that. How do I resolve this error? I want to set up a dev environment for OpenStack. For your ref, the whole error message is given now-- FilterError at / /usr/bin/env: node: No such file or directory Request Method: GET Request URL: http://192.168.1.4/ Django Version: 1.4.2 Exception Type: FilterError Exception Value: /usr/bin/env: node: No such file or directory Exception Location: /usr/local/lib/python2.7/dist-packages/compressor/filters/base.py in input, line 133 Python Executable: /usr/bin/python Python Version: 2.7.3 Python Path: ['/opt/stack/horizon/openstack_dashboard/wsgi/../..', '/opt/stack/python-keystoneclient', '/opt/stack/python-novaclient', '/opt/stack/python-openstackclient', '/opt/stack/keystone', '/opt/stack/glance', '/opt/stack/python-glanceclient/setuptools_git-0.4.2-py2.7.egg', '/opt/stack/python-glanceclient', '/opt/stack/nova', '/opt/stack/horizon', '/opt/stack/cinder', '/opt/stack/python-cinderclient', '/usr/local/lib/python2.7/dist-packages', '/usr/lib/python2.7', '/usr/lib/python2.7/plat-linux2', '/usr/lib/python2.7/lib-tk', '/usr/lib/python2.7/lib-old', '/usr/lib/python2.7/lib-dynload', '/usr/lib/python2.7/dist-packages', '/usr/lib/python2.7/dist-packages/PIL', '/usr/lib/python2.7/dist-packages/gst-0.10', '/usr/lib/python2.7/dist-packages/gtk-2.0', '/usr/lib/pymodules/python2.7', '/usr/lib/python2.7/dist-packages/ubuntu-sso-client', '/usr/lib/python2.7/dist-packages/ubuntuone-client', '/usr/lib/python2.7/dist-packages/ubuntuone-control-panel', '/usr/lib/python2.7/dist-packages/ubuntuone-couch', '/usr/lib/python2.7/dist-packages/ubuntuone-storage-protocol', '/opt/stack/horizon/openstack_dashboard'] Server time: Sat, 27 Oct 2012 08:43:29 +0000 Error during template rendering In template /opt/stack/horizon/openstack_dashboard/templates/_stylesheets.html, error at line 3 /usr/bin/env: node: No such file or directory 1 {% load compress %} 2 3 {% compress css %} 4 <link href='{{ STATIC_URL }}dashboard/less/horizon.less' type='text/less' media='screen' rel='stylesheet' /> 5 {% endcompress %} 6 7 <link rel="shortcut icon" href="{{ STATIC_URL }}dashboard/img/favicon.ico"/> 8 Also, the traceback is now given below-- Environment: Request Method: GET Request URL: http://192.168.1.4/ Django Version: 1.4.2 Python Version: 2.7.3 Installed Applications: ('openstack_dashboard', 'django.contrib.contenttypes', 'django.contrib.auth', 'django.contrib.sessions', 'django.contrib.messages', 'django.contrib.staticfiles', 'django.contrib.humanize', 'compressor', 'horizon', 'openstack_dashboard.dashboards.project', 'openstack_dashboard.dashboards.admin', 'openstack_dashboard.dashboards.settings', 'openstack_auth') Installed Middleware: ('django.middleware.common.CommonMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', 'horizon.middleware.HorizonMiddleware', 'django.middleware.doc.XViewMiddleware', 'django.middleware.locale.LocaleMiddleware') Template error: In template /opt/stack/horizon/openstack_dashboard/templates/_stylesheets.html, error at line 3 /usr/bin/env: node: No such file or directory 1 : {% load compress %} 2 : 3 : {% compress css %} 4 : <link href='{{ STATIC_URL }}dashboard/less/horizon.less' type='text/less' media='screen' rel='stylesheet' /> 5 : {% endcompress %} 6 : 7 : <link rel="shortcut icon" href="{{ STATIC_URL }}dashboard/img/favicon.ico"/> 8 : Traceback: File "/usr/local/lib/python2.7/dist-packages/django/core/handlers/base.py" in get_response 111. response = callback(request, *callback_args, **callback_kwargs) File "/usr/local/lib/python2.7/dist-packages/django/views/decorators/vary.py" in inner_func 36. response = func(*args, **kwargs) File "/opt/stack/horizon/openstack_dashboard/wsgi/../../openstack_dashboard/views.py" in splash 38. return shortcuts.render(request, 'splash.html', {'form': form}) File "/usr/local/lib/python2.7/dist-packages/django/shortcuts/__init__.py" in render 44. return HttpResponse(loader.render_to_string(*args, **kwargs), File "/usr/local/lib/python2.7/dist-packages/django/template/loader.py" in render_to_string 176. return t.render(context_instance) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 140. return self._render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in _render 134. return self.nodelist.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 823. bit = self.render_node(node, context) File "/usr/local/lib/python2.7/dist-packages/django/template/debug.py" in render_node 74. return node.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/loader_tags.py" in render 155. return self.render_template(self.template, context) File "/usr/local/lib/python2.7/dist-packages/django/template/loader_tags.py" in render_template 137. output = template.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 140. return self._render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in _render 134. return self.nodelist.render(context) File "/usr/local/lib/python2.7/dist-packages/django/template/base.py" in render 823. bit = self.render_node(node, context) File "/usr/local/lib/python2.7/dist-packages/django/template/debug.py" in render_node 74. return node.render(context) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render 147. return self.render_compressed(context, self.kind, self.mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render_compressed 107. rendered_output = self.render_output(compressor, mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/templatetags/compress.py" in render_output 119. return compressor.output(mode, forced=forced) File "/usr/local/lib/python2.7/dist-packages/compressor/css.py" in output 51. ret.append(subnode.output(*args, **kwargs)) File "/usr/local/lib/python2.7/dist-packages/compressor/css.py" in output 53. return super(CssCompressor, self).output(*args, **kwargs) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in output 230. content = self.filter_input(forced) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in filter_input 192. for hunk in self.hunks(forced): File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in hunks 167. precompiled, value = self.precompile(value, **options) File "/usr/local/lib/python2.7/dist-packages/compressor/base.py" in precompile 210. command=command, filename=filename).input(**kwargs) File "/usr/local/lib/python2.7/dist-packages/compressor/filters/base.py" in input 133. raise FilterError(err) Exception Type: FilterError at / Exception Value: /usr/bin/env: node: No such file or directory

  Read the article

• which package i should choose, if i want to install virtualenv for python?

  - by hugemeow

  pip search just returns so many matches, i am confused about which package i should choose to install .. should i only install virtualenv? or i'd better also install virtualenv-commands and virtualenv-commands, etc, but i really don't know exactly what virtualenv-commands is ... mirror0@lab:~$ pip search virtualenv virtualenvwrapper - Enhancements to virtualenv virtualenv - Virtual Python Environment builder veh - virtualenv for hg pyutilib.virtualenv - PyUtilib utility for building custom virtualenv bootstrap scripts. envbuilder - A package for automatic generation of virtualenvs virtstrap-core - A bootstrapping mechanism for virtualenv+pip and shell scripts tox - virtualenv-based automation of test activities virtualenvwrapper-win - Port of Doug Hellmann's virtualenvwrapper to Windows batch scripts everyapp.bootstrap - Enhanced virtualenv bootstrap script creation. orb - pip/virtualenv shell script wrapper monupco-virtualenv-python - monupco.com registration agent for stand-alone Python virtualenv applications virtualenvwrapper-powershell - Enhancements to virtualenv (for Windows). A clone of Doug Hellmann's virtualenvwrapper RVirtualEnv - relocatable python virtual environment virtualenv-clone - script to clone virtualenvs. virtualenvcontext - switch virtualenvs with a python context manager lessrb - Wrapper for ruby less so that it's in a virtualenv. carton - make self-extracting virtualenvs virtualenv5 - Virtual Python 3 Environment builder clever-alexis - Clever redhead girl that builds and packs Python project with Virtualenv into rpm, deb, etc. kforgeinstall - Virtualenv bootstrap script for KForge pypyenv - Install PyPy in virtualenv virtualenv-distribute - Virtual Python Environment builder virtualenvwrapper.project - virtualenvwrapper plugin to manage a project work directory virtualenv-commands - Additional commands for virtualenv. rjm.recipe.venv - zc.buildout recipe to turn the entire buildout tree into a virtualenv virtualenvwrapper.bitbucket - virtualenvwrapper plugin to manage a project work directory based on a BitBucket repository tg_bootstrap - Bootstrap a TurboGears app in a VirtualEnv django-env - Automaticly manages virtualenv for django project virtual-node - Install node.js into your virtualenv django-environment - A plugin for virtualenvwrapper that makes setting up and creating new Django environments easier. vip - vip is a simple library that makes your python aware of existing virtualenv underneath. virtualenvwrapper.django - virtualenvwrapper plugin to create a Django project work directory terrarium - Package and ship relocatable python virtualenvs venv_dependencies - Easy to install any dependencies in a virtualenviroment(without making symlinks by hand and etc...) virtualenv-sh - Convenient shell interface to virtualenv virtualenvwrapper.github - Plugin for virtualenvwrapper to automatically create projects based on github repositories. virtualenvwrapper.configvar - Plugin for virtualenvwrapper to automatically export config vars found in your project level .env file. virtualenvwrapper-emacs-desktop - virtualenvwrapper plugin to control emacs desktop mode bootstrapper - Bootstrap Python projects with virtualenv and pip. virtualenv3 - Obsolete fork of virtualenv isotoma.depends.zope2_13_8 - Running zope in a virtualenv virtual-less - Install lessc into your virtualenv virtualenvwrapper.tmpenv - Temporary virtualenvs are automatically deleted when deactivated isotoma.plone.heroku - Tooling for running Plone on heroku in a virtualenv gae-virtualenv - Using virtualenv with zipimport on Google App Engine pinvenv - VirtualEnv plugins for pin isotoma.depends.plone4_1 - Running plone in a virtualenv virtualenv-tools - A set of tools for virtualenv virtualenvwrapper.npm - Plugin for virtualenvwrapper to automatically encapsulate inside the virtual environment any npm installed globaly when the venv is activated d51.django.virtualenv.test_runner - Simple package for running isolated Django tests from within virtualenv difio-virtualenv-python - Difio registration agent for stand-alone Python virtualenv applications VirtualEnvManager - A package to manage various virtual environments. virtualenvwrapper.gem - Plugin for virtualenvwrapper to automatically encapsulate inside the virtual environment any gems installed when the venv is activated

  Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >