Search Results

Search found 15605 results on 625 pages for 'exchange cached mode'.

Page 428/625 | < Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >

  • How do I require use of the 5 GHz band when connecting to a Wireless N access point?

    - by cqcallaw
    What is says in the topic: there's a Wireless N access point to which I'd like to connect using the 5 GHz band exclusively. How does one accomplish this? Using the directive band=a in the connection configuration file in /etc/NetworkManager/system-connections doesn't seem to affect anything (/var/log/syslog still shows attempts by wpa_supplicant to connect using the 2.4 GHz band), and running iwconfig wlan0 freq 5G per this question results in the following error: Error for wireless request "Set Frequency" (8B04) : SET failed on device wlan0 ; Invalid argument. [Edit] I'm hoping the answer won't depend on the hardware in use, but here's some information about the hardware, just in case: System is an Asus ZenBook Prime UX31A-DB51, running Ubuntu 12.04. lspci output: 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:04.0 Signal processing controller: Intel Corporation Device 0153 (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.1 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 2 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 SATA controller: Intel Corporation Panther Point 6 port SATA Controller [AHCI mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 00:1f.6 Signal processing controller: Intel Corporation Panther Point Thermal Management Controller (rev 04) 02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) The driver for the wireless interface is iwlwifi.

    Read the article

  • How to Pin Any File to the Start Screen in Windows 8

    - by Taylor Gibb
    By default Windows 8 only allows you to pin a few file types to the Start Screen. Read on to find out how you can change that by editing the registry. How to Pin Any File to the Start Screen in Windows 8 Press the Win + R keyboard combination to open a run box, then type notepad and press enter. When notepad opens, paste the following into the new document: Windows Registry Editor Version 5.00 [HKEY_CLASSES_ROOT\*\shell\pintostartscreen] “MUIVerb”=”@shell32.dll,-51201″ “NeverDefault”=”" “Description”=”@shell32.dll,-51202″ “MultiSelectModel”=”Single” [HKEY_CLASSES_ROOT\*\shell\pintostartscreen\command] “DelegateExecute”=”{470C0EBD-5D73-4d58-9CED-E91E22E23282}” Then click on the File menu item and select save as… Before you go any further, change the Save as type to All Files. Then give your file a name ending in .reg and click Save. PinToStartHack.reg To use the hack, just double click on the .reg file you just created. When you are prompted about whether you want to continue, click Yes. Now you can pin any file to the Start Screen. Undo the Change If you ever wish to undo the change, press the Win + R keyboard combination and type regedit, then press enter. Then drill down into: HKEY_CLASSES_ROOT\*\shell\ Finally delete the pintostartscreen key. That’s all there is to it. How to Factory Reset Your Android Phone or Tablet When It Won’t Boot Our Geek Trivia App for Windows 8 is Now Available Everywhere How To Boot Your Android Phone or Tablet Into Safe Mode

    Read the article

  • There's IP but can't reach gateway

    - by icky
    I have just installed ubuntu 12.04 on my new laptop, and brought it back to home, but I found the wireless network does not work. Strangely, it has the correct ip, but can't connect to the gateway. ifconfig gives ip 192.168.64.36, with broadcast 192.168.79.255 and mask 255.255.240.0, this are all correct, the gateway is at 192.168.64.1 cat /etc/resolv.conf nameserver 192.168.64.1 nameserver 127.0.0.1 which i think it's also right. but when I ping 192.168.64.1, all packages are lost. Please help me with this, I really do not know what happened to my network settings. Huckle, Thank you for your reply ifconfig wlan0 Link encap:Ethernet Hwaddr 88:f9:af:2a:ca:1b inet addr:192.168.64.36 Bcast:192.168.79.255 Mask:255.255.240.0 inet6 addr: fe80::8a9f:faff:fea2/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:27 errors:0 dropped:0 overruns:0 frame:0 TX packets:376 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3950 TX byetes:60288 iwconfig wlan0 IEEE 802.11bgn ESSID:"Chiono" Mode:Managed Frequency:2.417 GHz Access Point: 82:54:99:94:6D:43 Bit Rate=13.5 Mb/s Tx-Power=13 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=70/70 Signal Level=-32 dBm Rx invalid nwid:0 Rx invalid crypt:0 RX invalid frag:0 Tx excessive retries: 9 Invalid misc:10 Missed beacon:0 route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface default 192.168.64.1 0.0.0.0 UG 0 0 0 wlan0 link-local * 255.255.0.0 U 1000 0 0 wlan0 192.168.64.0 * 255.255.240.0 U 2 0 0 0 wlan0 Thank you very much

    Read the article

  • How to access a fake raid?

    - by maaartinus
    I have a fake raid, which I wanted to access using mdadm /dev/md0 -A -c 128 -l stripe --verbose /dev/sda /dev/sdc which should be right, as far as I understand the man page. But I get the message mdadm: option -l not valid in assemble mode leaving the offending option out leads to mdadm: failed to create /dev/md0 and (despite verbose) no more information. I'm assuming that -A requires some mdadm-specific header which is obviously missing. I probably need to use "build" instead of assemble, but from the description I'm really unsure whether this is a non-destructive operation. Is it? What should I exactly do? UPDATE I see I haven't made clear, that the array already exists as a fake-raid (I can't give the details about my mainboard now). It looks like doing nothing except for interleaving blocks, so I hoped it could be easily done using mdadm, too. Maybe I'm completely wrong, but all the info I've found was concerned with booting from fake-raid, what I don't really need. I'd be happy with a read access for now.

    Read the article

  • Trying to compile from source newest apache with newest openssl

    - by AlexMA
    I need to install apache 2.4.10 using openssl 1.0.1i. I compiled openssl from source with: $ ./config \ --prefix=/opt/openssl-1.0.1i \ --openssldir=/opt/openssl-1.0.1i $ make $ sudo make install and Apache with: ./configure --prefix=/etc/apache2 \ --enable-access_compat=shared \ --enable-actions=shared \ --enable-alias=shared \ --enable-allowmethods=shared \ --enable-auth_basic=shared \ --enable-authn_core=shared \ --enable-authn_file=shared \ --enable-authz_core=shared \ --enable-authz_groupfile=shared \ --enable-authz_host=shared \ --enable-authz_user=shared \ --enable-autoindex=shared \ --enable-dir=shared \ --enable-env=shared \ --enable-headers=shared \ --enable-include=shared \ --enable-log_config=shared \ --enable-mime=shared \ --enable-negotiation=shared \ --enable-proxy=shared \ --enable-proxy_http=shared \ --enable-rewrite=shared \ --enable-setenvif=shared \ --enable-ssl=shared \ --enable-unixd=shared \ --enable-ssl \ --with-ssl=/opt/openssl-1.0.1i \ --enable-ssl-staticlib-deps \ --enable-mods-static=ssl make (would run sudo make install next but I get an error) I'm essentially following the guide here except with newer slightly newer versions. My problem is I get a linker error when I run make for apache: Making all in support make[1]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' make[2]: Entering directory `/home/developer/downloads/httpd-2.4.10/support' /usr/share/apr-1.0/build/libtool --silent --mode=link x86_64-linux-gnu-gcc -std=gnu99 -pthread -L/opt/openssl-1.0.1i/lib -lssl -lcrypto \ -o ab ab.lo /usr/lib/x86_64-linux-gnu/libaprutil-1.la /usr/lib/x86_64-linux-gnu/libapr-1.la -lm /usr/bin/ld: /opt/openssl-1.0.1i/lib/libcrypto.a(dso_dlfcn.o): undefined reference to symbol 'dlclose@@GLIBC_2.2.5' I tried the answer here, but no luck. I would prefer to just use aptitude, but unfortunately the versions I need aren't available yet. If anyone knows how to fix the linker problem (or what I think is a linker problem), or knows of a better way to tell apache to use a newer openssl, it would be greatly appreciated; I've got apache 1.0.1i working otherwise.

    Read the article

  • XPath & XML EDI B2B

    - by PearlFactory
    GoodToGo :) Best XML Editor is Altova XMLSpy 2011 http://www.torrenthound.com/hash/bfdbf55baa4ca6f8e93464c9a42cbd66450bb950/torrent-info/Altova-XMLSpy-Enterprise-Edition-SP1-2011-v13-0-1-0-h33t-com-Full For whatever reason Piratebay has trojans and other nasties..Search in torrent.eu for Altova XMLSpy Enterprise Edition SP1 2011 v13.0.1.0 Also if you like the product purchase it in a Commercial Enviroment Any well structured/complex XML can be parsed @ the speed of light using XPATH querys and not the C# objects XPathNodeIterator and others etc ....Never do loops  or Genirics or whatever highlevel language technology. Use the power of XPATH i.e Will use a Simple (Do while) as an example. We could have many different techs all achieveing the same result Instead of   xmlNI2 = xmlNav.Select("/p:BookShop")         if (xmlNI2.Count != 0)            {                                 while ((xmlNI2.MoveNext()))              string aNode =xmlNI2.SelectSingleNode('Book', nsmgr); if (aNode =="The Book I am after")       Console.WriteLine("Found My Book);   This lengthy cumbersome task can be achieved with a simple XPATH query Console.WriteLine((xmlNavg.SelectSingleNode("/p:BookShop/Book[.='The Book I am aFter ']", nsmgr)).Value.ToString()); Use the power of the parser and eliminate the middleman C#/MSIL/JIT etc etc Get Started Fast and use the parser as Outlined 1) Open XML and goto Grid Mode 2) Select XPATH tab on the bottom viewer/window as shown  From here you get intellisense and can quickly learn how to navigate/find the data using XPATH A key component to Navigation with XPATH is to use the "../ " command . This basically says from where I am now go up 1 level . With Xpath all commands are cumalative. i.e you can search for a book title @ the 2nd level of the XML and from there traverse 15 layers to paragraphs or words on a page with expression validation occuring throughout this process etc  (So in essence you may have arrived @ a node within the XML and have met 15 conditions along the way ) Given 1-2 days with XmlSpy and XPATH you unlock a technology that is super fast and simple to use. XML is a core component to what lays under the hood of so many techs. So it is no wonder that you want to be able to goto  the atomic level to achieve the result you want Justin P.S For a long time I saw XML as slow and a bit boring but now converted

    Read the article

  • Internet Timeouts with TP-Link TL-WN821N v2 wireless usb stick

    - by user1622959
    A short time after accessing the internet, the browser/download times out. Before the timeout, the internet works OK briefly; afterwards, the wireless is still connected with a strong signal, but every internet access results in a timeout. When I leave the PC for a while, the internet is back just to timeout again as soon as I start using it. The same happens when I reconnect to the router. Also, when I surf the internet, it takes a couple of minutes until the timeout, but when I download something, it times out in a matter of seconds. The wireless adapter works just fine in Windows and internet via ethernet cable works just fine in Ubuntu. Does anyone have the same problem or knows a solution. I use Ubuntu 12.10 x64. The problem occurs since I installed ubuntu (which was a few days ago). Here some stuff that might be usefull: serus@serus-Ubuntu-PC:~$ lsusb Bus 002 Device 002: ID 0cf3:1002 Atheros Communications, Inc. TP-Link TL-WN821N v2 802.11n [Atheros AR9170] serus@serus-Ubuntu-PC:~$ lsmod Module Size Used by carl9170 82083 0 serus@serus-Ubuntu-PC:~$ modinfo carl9170 filename: /lib/modules/3.5.0-21- generic/kernel/drivers/net/wireless/ath/carl9170/carl9170.ko alias: arusb_lnx alias: ar9170usb firmware: carl9170-1.fw description: Atheros AR9170 802.11n USB wireless serus@serus-Ubuntu-PC:~$ iwconfig wlan0 IEEE 802.11bgn ESSID:"virginmedia0137463" Mode:Managed Frequency:2.462 GHz Access Point: A0:21:B7:F8:29:B6 Bit Rate=240 Mb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=66/70 Signal level=-44 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:1399 Invalid misc:18 Missed beacon:0 serus@serus-Ubuntu-PC:~$ sudo lshw -C network *-network description: Wireless interface physical id: 1 bus info: usb@2:2 logical name: wlan0 serial: 00:27:19:bb:00:19 capabilities: ethernet physical wireless configuration: broadcast=yes driver=carl9170 driverversion=3.5.0-21-generic firmware=1.9.4 ip=192.168.0.6 link=yes multicast=yes wireless=IEEE 802.11bgn

    Read the article

  • CodePlex Daily Summary for Sunday, June 26, 2011

    CodePlex Daily Summary for Sunday, June 26, 2011Popular ReleasesDroid Builder: Droid Builder - 1.0.4194.38898: Support new type of patch package. Support plugin framework.Mosaic Project: Mosaic Alpha build 254: - Added horizontal scroll by mouse in fullscreen mode - Widgets now have fixed size - Reduced spacing between widgets - Widgets menu is scrollable by mouse now and not overlapping back button on small screens.Net Image Processor: v1.0: Initial release of the library containing the core architecture and two filters. To install, extract the library to somewhere sensible then reference as a file from your project in Visual Studio.Usage Agent: Usage Agent 9.0.8: Latest release. Changes include: - Fixes for Optus - Usage Delta statistic for BigPond - Eliminated the need for UAC prompt at every startupjQuery List DragSort: jQuery List DragSort 0.4.3: Fix item not dropping correctly on Chrome and jQuery 1.6KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.TerrariViewer: TerrariViewer v3.3 [v1.0.5 Compatible]: I have added support for all the new items in Terraria v1.0.5. I have also added the ability to put your character in hardcore mode or take them out via a simple checkbox on the stats tab. If you come across any bugs, please let me know immediately.Media Companion: MC 3.409b-1 Weekly: This weeks release is part way through a major rewrite of the TVShow code. This means that a few TV related features & functions are not fully operational at the moment. The reason for this release is so that people can see if their particular issue has been fixed during the week. Some issues may not be able to be fully checked due to the ongoing TV code refactoring. So, I would strongly suggest that you put this version into a separate folder, copy your settings folder across & test MC that...Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5Kinect Earth Move: KinectEarthMove sample code: Sample code releasedThis is a sample code for Kinect for Windows SDK beta, which was demonstrated on Channel 9 Kinect for Windows SKD beta launch event on June 17 2011. Using color image and skeleton data from Kinect and user in front of Kinect can manipulate the earth between his/her hands.NetOffice - The easiest way to use Office in .NET: NetOffice Release 0.9b: Changes: - fix critical issue 262334 (AccessViolationException while using events in a COMAddin) - remove x64 Assemblies (not necessary) Includes: - Runtime Binaries and Source Code for .NET Framework:......v2.0, v3.0, v3.5, v4.0 - Tutorials in C# and VB.Net:..............................................................COM Proxy Management, Events, etc. - Examples in C# and VB.Net:............................................................Excel, Word, Outlook, PowerPoint, Access - COMAddi...MiniTwitter: 1.70: MiniTwitter 1.70 ???? ?? ????? xAuth ?? OAuth ??????? 1.70 ??????????????????????????。 ???????????????? Twitter ? Web ??????????、PIN ????????????????????。??????????????????、???????????????????????????。Total Commander SkyDrive File System Plugin (.wfx): Total Commander SkyDrive File System Plugin 0.8.7b: Total Commander SkyDrive File System Plugin version 0.8.7b. Bug fixes: - BROKEN PLUGIN by upgrading SkyDriveServiceClient version 2.0.1b. Please do not forget to express your opinion of the plugin by rating it! Donate (EUR)SkyDrive .Net API Client: SkyDrive .Net API Client 2.0.1b (RELOADED): SkyDrive .Net API Client assembly has been RELOADED in version 2.0.1b as a REAL API. It supports the followings: - Creating root and sub folders - Uploading and downloading files - Renaming and deleting folders and files Bug fixes: - BROKEN API (issue 6834) Please do not forget to express your opinion of the assembly by rating it! Donate (EUR)Mini SQL Query: Mini SQL Query v1.0.0.59794: This release includes the following enhancements: Added a Most Recently Used file list Added Row counts to the query (per tab) and table view windows Added the Command Timeout option, only valid for MSSQL for now - see options If you have no idea what this thing is make sure you check out http://pksoftware.net/MiniSqlQuery/Help/MiniSqlQueryQuickStart.docx for an introduction. PK :-]HydroDesktop - CUAHSI Hydrologic Information System Desktop Application: 1.2.591 Beta Release: 1.2.591 Beta Releasepatterns & practices: Project Silk: Project Silk Community Drop 12 - June 22, 2011: Changes from previous drop: Minor code changes. New "Introduction" chapter. New "Modularity" chapter. Updated "Architecture" chapter. Updated "Server-Side Implementation" chapter. Updated "Client Data Management and Caching" chapter. Guidance Chapters Ready for Review The Word documents for the chapters are included with the source code in addition to the CHM to help you provide feedback. The PDF is provided as a separate download for your convenience. Installation Overview To ins...DropBox Linker: DropBox Linker 1.3: Added "Get links..." dialog, that provides selective public files links copying Get links link added to tray menu as the default option Fixed URL encoding .NET Framework 4.0 Client Profile requiredDotNetNuke® Community Edition: 06.00.00 Beta: Beta 1 (Build 2300) includes many important enhancements to the user experience. The control panel has been updated for easier access to the most important features and additional forms have been adapted to the new pattern. This release also includes many bug fixes that make it more stable than previous CTP releases. Beta ForumsBlogEngine.NET: BlogEngine.NET 2.5 RC: BlogEngine.NET Hosting - Click Here! 3 Months FREE – BlogEngine.NET Hosting – Click Here! This is a Release Candidate version for BlogEngine.NET 2.5. The most current, stable version of BlogEngine.NET is version 2.0. Find out more about the BlogEngine.NET 2.5 RC here. If you want to extend or modify BlogEngine.NET, you should download the source code. To get started, be sure to check out our installation documentation. If you are upgrading from a previous version, please take a look at ...New Projects6_6_6_w_m_s_open: jwervxsdfcfcf: cfcfChairforce hackathon project: project for hackathonDot Net Nuke Ajax Modules: This is a small collection of modules I think on once in a while which intend to improve a little dnn's user experience.Gnosis Game Engine: A simple game engine for the XNA 4.0 frame work that I am working on, mostly as a learning experience. I found that XNA game engines either require you to pay or are XNA 4.0 incompatible, and so this is my solution to that problem.KA_WindowsPhone7_Samples: Sample Code for Windows Phone 7 from http://kevinashley.comKinect MIDI Controller: This tool allows you to use a Kinect Sensor as a MIDI Controller for your Digital Audio Workbench. The tool is written in C#, and uses Microsoft Kinect SDK. Mosaic Project: Mosaic is an application that brings Metro UI to your desktop by live widgets.Movie Gate: A movie database that is also able to play the movies with your favorit media player.Musical Collective: An open-source web service that enables Musicians to collaborate on songs. Written in ASP.NET MVC (C#).NcADS-MVC: Clasificados MVCPokeTD: Ein kleines 2D Pokemon Tower-Defense Spiel. Es ist in C# und XNA geschrieben.PRO-TOKOL: PRO-TOKOL Server is a Programmable Logic Controller communication driver. The project is 100% coded in .NET Managed code. So, the dll can be included in any .NET project. The project uses the Microsoft Workflow Foundation to implement the DF1 Receiver and Transmitter logic.ShumaDaf: small project for display movies info directly from file structure using mymovies.xml. program create one simple xml file and display it!Silverlight Policy Service: The windows service act as a server and listens on TCP port 943 using IPv4 and IPv6. The socket policy included in the project allows all silverlight client applications to connect to TCP ports 4502-4506.SkinObject Module Wrapper: The SkinObject Module Wrapper is a DotNetNuke module that will allow you to add any DNN SkinObject to a page dinamically as if it was a DNN Module. Without any skin modification you can now inject new SkinObjects to you pages, configure the properties and change them on the fly.SkyNet0.3: Program that one should not be able to close.Team Zero Game One: SVN for the personal project(s) of Team Zero - Game One. We are creating a free game in HTML5 canvas using the CAKE api, found here: http://code.google.com/p/cakejs/ The game is about programming a small robot to move through a maze, sneaking past guards and other obstacles, using event-based programming. We've seen a number of games that allow you to "program" a character, and thought it would be interesting to do a different take on it. The game is still in early production, and actively ...Test-Driven Scaffolding (TDS): TDS helps developers of C# function members (methods, indexers, etc.) to quickly write drivers for code under development; these can easily be converted later to NUnit tests. TDS consists of C# code that can be pasted into a new or existing project and removed when no longer needed.Usage Agent: The Usage Agent toolset is designed to help manage your ISP data usage without having to log into your ISP usage page. It can optionally monitor your network card throughput and produce reports on usage. Developed in VB.NET.

    Read the article

  • With Slick, how to change the resolution during gameplay?

    - by TheLima
    I am developing a tile-based strategy game using Java and the Slick API. So far so good, but I've come to a standstill on my options menu. I have plans for the user to be able to change the resolution during gameplay (it is pretty common, after all). I can already change to fullscreen and back to windowed, this was pretty simple... //"fullScreenOption" is a checkbox-like button. if (fullScreenOption.isMouseOver(mouseX, mouseY)) { if (input.isMouseButtonDown(Input.MOUSE_LEFT_BUTTON)) { fullScreenOption.state = !fullScreenOption.state; container.setFullscreen(fullScreenOption.state); } } But the container class (Implemented by Slick, not me), contrary to my previous beliefs, does not seem to have any resolution-change functions! And that's pretty much the situation...I know it's possible, but i don't know how to do it, nor what is the class responsible! The AppGameContainer class, used on the very start of the game's initialization, is the only place with any functions for changing the display-mode that I've found so far, but it's only used at the very start, and i haven't found a way to travel back to it from my options menu. //This is my implementation of it... public static void main(String[] args) throws SlickException { AppGameContainer app = new AppGameContainer(new Main()); // app.setTargetFrameRate(60); app.setVSync(true); app.setDisplayMode(800, 600, false); app.start(); } I can define it as a static global on the Main, but it's probably a (very) bad way to do it...

    Read the article

  • FTP Connection established...Connection timed out problem with all my sites and FTP programs?

    - by janoChen
    Just few hours ago FileZilla was working fine. Then, suddenly I started to get this error: Status: Resolving address of ftp.readtypechinese.com Status: Connecting to 69.175.14.60:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server And it happens with all my sites: Status: Resolving address of edasich.dreamhost.com Status: Connecting to 173.236.223.223:21... Status: Connection established, waiting for welcome message... Error: Connection timed out Error: Could not connect to server I'm using FileZilla 3.5.0 and Ubuntu 11.10. Any suggestions to fix this? (I already tried Passive mode and it doesn't work). EDIT: Ocasionally, the log goes beyond the ...waiting for welcome message: Status: Connection established, waiting for welcome message... Response: 220 DreamHost FTP Server Command: USER aleche23 Error: Connection timed out Error: Could not connect to server But the connection gets timed out again. Weird...I just realized that I have the same problems with other FTP programs too: gFTP: Looking up ftp.readtypechinese.com Trying readtypechinese.com:21 Connected to readtypechinese.com:21 220 ProFTPD 1.3.2 Server (server) [69.175.14.60] USER [email protected] Connection to ftp.readtypechinese.com timed out

    Read the article

  • Fiction that includes BASIC programs [closed]

    - by Clinton Blackmore
    Back in what must've been the mid-80s, when every microcomputer included BASIC and Choose Your Own Adventure Books were really popular, there were some novels that had BASIC programs listed in the text, for you to type in and further enjoy. For example, as I recall, in one of these books, the adventurers were infiltrating an undersea base (and eventually wiped the bad guy's data storage [I do believe it was a hard drive, even though they were uncommon then]). One of the programs involved a game were you piloted a submarine and had to avoid or shoot sharks. The code was in BASIC; minor changes (such as 'CLS' - 'HOME') had to be made for your specific computer, and it used good old 40-column text-mode to display the action. IIRC, the plot never depended upon the programs. My question is, does anyone else recall these sorts of books? Do you know any titles that I could look for, or of any online? I am toying with the idea of writing a story like this (no, not in BASIC!), and would really like to see how it was done, back in the day.

    Read the article

  • How to squeeze the maximum performance out of Unity and GNOME 3?

    - by melvincv
    I see that I do not get good performance with the new Unity desktop, but I should say that Unity has improved a lot since the last edition Ubuntu 11.10. How to squeeze the maximum performance out of 1. Unity 2. GNOME 3 My system specs: -Processors- Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz -Memory- Total Memory : 2049996 kB -PCI Devices- Host bridge : Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10) PCI bridge : Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 10) (prog-if 00 [Normal decode]) VGA compatible controller : Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10) (prog-if 00 [VGA controller]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI]) USB controller : Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI]) PCI bridge : Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode]) ISA bridge : Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01) IDE interface : Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP]) IDE interface : Intel Corporation N10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO]) SMBus : Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01) Ethernet controller : Intel Corporation PRO/100 VE Network Connection (rev 01)

    Read the article

  • Update kernel patch for VMware Player 4.0.3

    As I stated some days ago, after upgrading to Ubuntu Precise Pangolin, aka 12.04 LTS, I had a minor obstacle with VMware products. Today, VMware offered to upgrade to Player 4.0.3 due to security-related reasons. Initially, I thought that this update might have the patch for kernel 3.2.0 integrated but sadly that is not the case. 'Hacking' the kernel patch My first intuitive try to run the existing patch against the sources of VMware Player 4.0.3 failed, as the patch by Stefano Angeleri (weltall) is originally written explicitely against Workstation 8.0.2 and Player 4.0.2. But this is nothing to worry about seriously. Just fire up your favourite editor of choice and modify the version signature for VMware Player, like so: nano patch-modules_3.2.0.sh And update line 8 for the new version: plreqver=4.0.3 Save the shell script and run it as super-user (root): sudo ./patch-modules_3.2.0.sh In case that you previously patched your VMware sources you have to remove some artifacts beforehand. Otherwise, the patch script will inform you like so: /usr/lib/vmware/modules/source/.patched found. You have already patched your sources. Exiting In that case, simply remove the 'hidden' file and run the shell script again: sudo rm /usr/lib/vmware/modules/source/.patchedsudo ./patch-modules_3.2.0.sh To finalise your installation either restart the vmware service or reboot your machine. On first start VMware will present you their EULA which you have to accept, and everything gets back to normal operation mode. Currently, I would assume that in case of VMware Workstation 8.0.3 you can follow the same steps as just described.

    Read the article

  • My internet connection slows or dies unexpectedly

    - by genesis
    I installed Ubuntu 10.04 once again and I'm having some problems which I had before, but I have no idea how I solved them. On Windows, everything's working fine and I had no problems with this. My problem is that sometimes, when browsing through the internet, webpages just start to load really slow, sometimes it doesn't load anything at all (Error 118 (net::ERR_CONNECTION_TIMED_OUT): The operation timed out.) and it starts to work after few minutes. My IPv4 settings are automatic (DHCP), and IPv6 settings are Ignored/Disabled. I think my previous problems had something to do with IPv6, but I'm not sure. Is there a fix for this? iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"Fsite1" Mode:Managed Frequency:2.442 GHz Access Point: C8:3A:35:40:43:68 Bit Rate=0 kb/s Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on Link Quality=43/70 Signal level=-67 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0

    Read the article

  • Digital HD Transition

    - by Bill Evjen
    The HD Experience Roughly 53% of the viewing public has HD capable devices in their home 24% think they are watching HD while they have no subscription to any HD content Today’s HD Considerations Choices abound: format resolution – 720p, 1080i/p frame rates compression and wrapping audio compression and delivery metadata packaging, delivery, and usage content delivery protocols Metadata is going to be a part of the overall experience With emerging technologies: Super Hi-Vision (SHV, UHDTV 4320p), 3D HEVC/H.265, WEBM/VP8 HDBaseT, P2PTV Dolby Pulse/HE-AAC Industry standardization Metadata registration, packaging, and delivery standards Improved picture and sound quality is a logical next step but we need to also think about the end to end viewing experience including; 3D video and audio content Mixed-mode viewing to bring interactive and immersive experiences Content Transportability both on-to and off-of the aircraft High Definition Standardization Analog switch off around the world DTV transition completed: 17 countries DTV transition in progress: 45 countries The EU has mandated the end of 2012 as the final date for Analog Switch Off D-Cinema was standardized by SMPTE in 2006 Airlines are installing HD displays today Passengers are bringing their own devices now HD TV on airlines are getting bigger and bigger – bigger than SD was – now up to 23” Gray scale data input for color – 6 to 8 bit Contrast – 400 to 700 Backlit – LED Encryption – can it be the same for HD? PPV in the cabin?

    Read the article

  • ATI Radeon HD with Catalyst driver stuck mirroring screens

    - by Mike Axiak
    In 11.10 I replaced my aging Nvidia card with a new Radeon HD 6970 card. The single card has two DVI output ports which I've connected to two monitors. I installed Catalyst version 11.9 and I cannot get multiple monitors set up the way I want. I tried: $ sudo amdcccle and setting the mode to single desktop multiple monitors and whenever I do that Unity crashes and I get back to the login screen. Nothing shows up in the Xorg.*.log files for me to post here. There's only one card so I don't think xinerama would be any help here. Anyone have any ideas? EDIT: Here's my xorg.conf file: Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP3" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x1024" Option "TargetRefresh" "75" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "amdcccle-Device[5]-1" Driver "fglrx" Option "Monitor-DFP3" "0-DFP3" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[5]-1" Device "amdcccle-Device[5]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

    Read the article

  • How to Use a PIN Instead of a Password in Windows 8

    - by Taylor Gibb
    Entering your full password on a touch screen device can really become a pain in the neck, luckily for us we can link a short 4 digit PIN to our user account and log in with that instead. Note: PIN codes are nowhere near as safe as using an alphanumeric password, however, they do still have a purpose when you don’t want to enter your 15 character password on a touch screen device. Creating a PIN Press the Win + I keyboard combination to bring up the Settings Charm, then click on the Change PC settings link. This will open up the Modern UI PC Settings app, where you can click on the Users section. On the right hand side you will see a Create a PIN button, click on it. Now you will need to verify that you are the owner of this user account by entering your password. Then you can choose a PIN, remember that it can only contain digits. Now when you get to the login screen you will have the option to use a PIN. How To Boot Your Android Phone or Tablet Into Safe Mode HTG Explains: Does Your Android Phone Need an Antivirus? How To Use USB Drives With the Nexus 7 and Other Android Devices

    Read the article

  • Connecting PS3 dualshock on Ubuntu 14.04 with 3.13.0-34-generic?

    - by 5th Wheel
    The last entries/queries I can find about PS3 dual shock controller are dealing with older kernel versions. It looks like there may still be a problem with using the PS3 dual shock via USB(or bluetooth) with 14.04? I'm only guessing because I get no sign of detection or input when I plug in the USB. When I run dmesg | grep sony [ 4687.762302] sony 0003:054C:0268.0003: can't set operational mode [ 4687.770639] sony: probe of 0003:054C:0268.0003 failed with error -38 So at this point, I don't know if it's worth running : sudo apt-get install xboxdrv I also found this article LINK but it's dated 01/2013. I was considering installing steam, and checking out some of the games. There are a few in particular I want to check out, but I'm afraid of purchasing them and then my controller does not work. I don't have a ps3, I just have the controller for Sixaxis/emulator/Android set up... I see mentions for QTsixa and xboxdrv, but the posts are at least a year old(older distibution/kernels) Ideally, I'd like to just plug in USB, and play. No Bluetooth.

    Read the article

  • Thunderbird keeps crashing Ubuntu 12.04 64 bit

    - by maurizio ribera d'alcala'
    I have been using Thunderbird for years under different versions of Ubuntu, including 12.04 since its release. From a couple of days it keeps crashing after a few seconds after start. I tried to reinstall it creating a new profile and copying the old mail, file by file. After one day of normal functioning it started again to crash. Mozilla is receiving the crash reports. Following is the content of the last one: Add-ons: [email protected]:15.0,[email protected]:0.3.11,[email protected]:0.9.3,[email protected]:3.4.1,[email protected]:15.0,[email protected]:0.5.1,{b4447f60-db9c-11da-a94d-0800200c9a66}:0.9.1,{972ce4c6-7e08-4474-a285-3208198ce6fd}:15.0 BuildID: 20120827103657 CrashTime: 1347200254 EMCheckCompatibility: true Email: [email protected] FramePoisonBase: 7ffffffff0dea000 FramePoisonSize: 4096 InstallTime: 1346431480 Notes: OpenGL: Tungsten Graphics, Inc -- Mesa DRI Intel(R) Sandybridge Mobile -- 3.0 Mesa 8.0.2 -- texture_from_pixmap ProductID: {3550f703-e582-4d05-9a08-453d09bdfdc6} ProductName: Thunderbird ReleaseChannel: release SecondsSinceLastCrash: 1109 StartupTime: 1347200242 Theme: classic/1.0 Throttleable: 1 Vendor: Version: 15.0 I started Thunderbird in safe mode and tested all the add-ons. Apparently is the 'Unity Launcher Integration' that creates the problem. I say apparently because I want two wait for two-three days to be sure TB returns to its regular functioning. Is this a bug? can it be solved

    Read the article

  • Maximum 5 minute battery life with Ubuntu 11.10 on HP laptop

    - by JamesG
    I apologise if this question is too similar to the numerous others already asked, but it seems that my difference in battery life is significantly more noticeable than others that have been reported. I recently installed Ubuntu 11.10 on my HP Pavilion dv6 laptop (which I purchased brand new just under one year ago). When running Windows 7 on this laptop, I have been able to get up to two and a half to three hours of battery life with wireless disabled and when running only Microsoft Word. However, when running Ubuntu, I am unable to use the laptop if it is not plugged in. Upon unplugging the fully-charged machine from the power cord, if I have wireless enabled, I immediately receive a notification that the battery levels are critically low and that shutdown is imminent. Even if I replace the power plug, the laptop shuts down within thirty seconds. If I disable wireless capability, I am able to run the laptop for an absolute maximum of five minutes on battery powers before receiving the same message. I have tried running with Jupiter on Power Saver mode, but to no noticeable effect. Ignoring the fact that I can't use my laptop without being attached to a power source, I really do enjoy using Ubuntu, and hence would greatly appreciate any help that can be offered.

    Read the article

  • Disappearring instances of VertexPositionColor using MonoGame

    - by Rosko
    I am a complete beginner in graphics developing with XNA/Monogame. Started my own project using Monogame 3.0 for WinRT. I have this unexplainable issue that some of the vertices disappear while doing some updates on them. Basically, it is a game with balls who collide with the walls and with each other and in certain conditions they explode. When they explode they disappear. Here is a video demonstrating the issue. I used wireframes so that it is easier to see how vertices are missing. The perfect exploding balls are the ones which are result by user input with mouse clicking. Thanks for the help. The situations is: I draw user primitives with triangle strips using like this graphicsDevice.DrawUserPrimitives<VertexPositionColor>(PrimitiveType.TriangleStrip, circleVertices, 0, primitiveCount); All of the primitives are in the z-plane (z = 0), I thought that it is the culling in action. I tried setting the culling mode to none but it did not help. Here is the code responsible for the explosion private void Explode(GameTime gameTime, ref List<Circle> circles) { if (this.isExploding) { for (int i = 0; i < this.circleVertices.Length; i++) { if (this.circleVertices[i] != this.circleCenter) { if (Vector3.Distance(this.circleVertices[i].Position, this.circleCenter.Position) < this.explosionRadius * precisionCoefficient) { var explosionVector = this.circleVertices[i].Position - this.circleCenter.Position; explosionVector.Normalize(); explosionVector *= explosionSpeed; circleVertices[i].Position += explosionVector * (float)gameTime.ElapsedGameTime.TotalSeconds; } else { circles.Remove(this); } } } } } I'd be really greatful if anyone has suggestions about how to fix this issue.

    Read the article

  • Ubuntu installed along side Win 8 but not shown in boot

    - by Mahesha999
    Actually the question says it all, but let me tell you what I did, so u may find exactly what might have went wrong: I have Win 8 installed on 500 GB HDD. SO I shrunk it four times for: partition 1 - the original partition containing Win 8 sys (118GB) partition 2 - NTFS formatted for my data (188GB) partition 3 - NTFS formatted for my data (100GB) partition 4 - NTFS formatted for Linux distro 1 (I reformatted it to ext4 during Ubuntu installation) (25GB) partition 5 - NTFS formatted for Linux distro 1 (21GB) So now I booted Ubuntu from USB (created from ubuntu-12.04-desktop-amd64.iso) and deleted last two partitions 4 and 5 to create: partition 1 - ext4 where I installed Ubuntu (25GB) partition 2 - Swap (4GB) partition 3 - unallocated space, not formatted yet (17GB) Ubuntu installation said it installed successfully and that I have to restart to boot in Ubuntu. But when I restart Windows 8 auto booted - there was no dual boot. After that I devided above 100GB partition to 80Gb and 20GB ones (since I read online that I should have /home in separate partition for convenience, so I created 20GB partition for it) So I went on to manually create boot entry using EasyBCD as below show in picture at below link http://s19.postimage.org/dof2zuvw3/Free_BCD.png When I created the entry, FreeBCD showed the information as follows: Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume2 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} integrityservices Enable default {ea8167ad-d189-11e1-90e4-ab2f09569dcc} resumeobject {ea8167a3-d189-11e1-90e4-ab2f09569dcc} displayorder {ea8167ad-d189-11e1-90e4-ab2f09569dcc} {ea8167b1-d189-11e1-90e4-ab2f09569dcc} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {ea8167ad-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \Windows\system32\winload.exe description Windows 8 locale en-US osdevice partition=C: systemroot \Windows resumeobject {9bc7fdf7-3ae0-11e2-be77-806e6f6e6963} Real-mode Boot Sector --------------------- identifier {ea8167b1-d189-11e1-90e4-ab2f09569dcc} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu Notice the last bolded entry created. Howevever after thet, when I rebooted it firstly showed old DOS like bootloader (no Windows 8 UI based bootloader) with two entries Windows and Ubuntu. Windows 8 was booting correctly but I was getting an error while booting Ubuntu taking me to GRUB Rescue. Please help am new to Linux world.

    Read the article

  • A fix for the design time error in MVVM Light V4.1

    - by Laurent Bugnion
    For those of you who installed V4.1 of MVVM Light and created a project for Windows Phone 8, you will have noticed an error showing up in the design surface (either in Visual Studio designer, or in Expression Blend). The error says: “Could not load type ‘System.ComponentModel.INotifyPropertyChanging’ from assembly ‘mscorlib.extensions’” with additional information about version numbers. The error is caused by an incompatibility between versions of System.Windows.Interactivity. Because this assembly is strongly named, any version incompatibility is causing the kind of error shown here (for an interesting discussion on the strong naming issue, see this thread on Codeplex). I managed to resolve the issue for Windows Phone 8 and will publish a cleaned up installer next week. In the mean time, in order to allow you to continue development, please follow the steps: Download the new DLLs zip package (MVVMLight_V4_1_25_WP8). Right click on the Zip file and select Properties from the context menu. Press the “Unblock” button (if available) and then OK. Right click again on the zip package and select “Extract all…”. Select a known location for the new DLLs. Open the MVVM Light project with the design time error in Visual Studio 2012. Open the References folder in the Solution Explorer. Select the following DLLs: GalaSoft.MvvmLight.dll, GalaSoft.MvvmLight.Extras.dll, Microsoft.Practices.ServiceLocation.dll and System.Windows.Interactivity.dll. Press “delete” and confirm to remove the DLLs from your project. Right click on References and select Add Reference from the context menu. Browse to the folder with the new DLLs. Select the four new DLLs and press OK. Rebuild your application, and open it again in Blend or in the Visual Studio designer. The error should be gone now. In the next few days, as time allows, I will publish a new MSI containing a fixed version of the DLLs as well as a few other improvements. This quick fix should however allow you to continue working on your Windows Phone 8 projects in design mode too.   Laurent Bugnion (GalaSoft) Subscribe | Twitter | Facebook | Flickr | LinkedIn

    Read the article

  • Ubuntu 12.04 and Nvidia GTX 550 Ti

    - by Jim
    OK I'm currently trying to install Ubuntu x64 Server 12.04 onto the following machine: Intel Core i5-2320 3.0GHz LGA1155 6MB 8 GB DDR3 RAM, Gigabyte Z68P-DS3 S1155 Intel Z68 DDR3 ATX M/B, OCZ 60 GB SSD, 3x Samsung 2TB drives in a RAID 5 array (via M/B) Now what I think is causing the issue is the following: EVGA GeForce GTX 550 Ti 951MHz 1GB PCI-Express HDMI FPB As the server CD works in text mode I haven't had a problem with actually installing Ubuntu. Partioned with: 1GB /boot SSD, 59GB / SSD, 10GB swap RAID5, ~4TB /home RAID5 On a straight boot, you briefly see the GRUB menu, followed by a blank screen. The keyboard and mouse blink as they are initialised but no sign of life from the screen. Followed by a bit of research (otherwise known as google) ... Booted in quiet splash nomodeset Now I have a fully working linux distro at the command prompt. I then proceed to try and update the nvidia drivers with apt-get (after updating repositories etc) and rebooting. Still the same problem. I also tried reinstalling from the CD and installing said drivers in the install process before GRUB was installed, still the same symptoms. Does anybody have any solutions? I'm at my wits end here, I bought this machine to be a linux server / tinkering machine and have just spent 4-5 hours trying to just get a basic install working.

    Read the article

  • How do you make slides for programming talks?

    - by Yuvi Masory
    I've given a few talks recently and I have not found a good way to make slides. Here are a few desirable characteristics for programming slides: They're slides. A standard emacs buffer won't do it. They have syntax highlighting for code. They support basic formatting, like font size and color and bullets. No fancy animations needed. The only animation I desire is one-by-one appearance of bullets. So far I have considered: Microsoft Office - out of the question for Linux users. OpenOffice.org - too much for my needs, code formatting/highlighting needs to be done externally and pasted in. On the plus side supports bullets, bullet-by-bullet animation, and font formatting. Emacs - Supports all the code formatting but I haven't found a slides mode that lets me transition from one chunk to another. HTML5 - I once made slides using html5rocks as a template. It supports everything, but is too hard and time-consuming the "throw together" a few slides before a minor talk. Also the html5-only features may not work on the podium computer's installed browser. Any suggestions for programs/techniques for making code-centric presentations?

    Read the article

< Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >