Search Results

Search found 111506 results on 4461 pages for 'sql server driver for node js'.

Page 43/4461 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Can't get Wireless RT2x00usb driver to work, and can't blacklist it

  - by TheLQ

  After a two year hiatus to Linux, I try it again out again. And then I run into to driver issues... I have an old Linksys WUSB54G v4 Wireless USB Adapter. In previous versions I had to use a combination of Ndiswrapper and Wicd to hope of getting it working. In 10.10, apparently there are built in drivers for it. Unfortunately they don't work. Fails to connect to my WPA network, fails to connect to my open unencrypted network. Wicd fails at "Obtaining IP address" or when using static IPs fails at verifying connectivity to network. Getting fed up I tried the ndiswrapper approach. Installed and configured, but still not working, even when blacklisting the rt2570 module. So for some debugging I added some lines to my /etc/modprobe.d/blacklist.conf file blacklist rt2570 blacklist prism54usb blacklist rt2x00lib blacklist rt2x00usb Restart and find this: lordquackstar@quackbeast:/etc/modprobe.d$ lsmod | grep rt2 rt2500usb 18049 0 rt2x00usb 9779 1 rt2500usb rt2x00lib 27275 2 rt2500usb,rt2x00usb led_class 2633 1 rt2x00lib mac80211 231541 2 rt2x00usb,rt2x00lib cfg80211 144470 2 rt2x00lib,mac80211 Seems to be ignored... Tried this: lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00usb ERROR: Removing 'rt2x00usb': Resource temporarily unavailable lordquackstar@quackbeast:/etc/modprobe.d$ sudo rmmod -f rt2x00lib ERROR: Removing 'rt2x00lib': Resource temporarily unavailable and couldn't connect. Restarted and was back to the same modules loading. Maybe there's something in the log: lordquackstar@quackbeast:/etc/modprobe.d$ tail -n100000 /var/log/syslog | grep rt2 Dec 13 19:01:15 quackbeast kernel: [ 23.698056] Registered led device: rt2500usb-phy0::radio Dec 13 19:01:15 quackbeast kernel: [ 23.698140] Registered led device: rt2500usb-phy0::quality Dec 13 19:01:15 quackbeast kernel: [ 23.701680] usbcore: registered new interface driver rt2500usb Dec 13 19:01:15 quackbeast NetworkManager[855]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Dec 13 19:17:47 quackbeast kernel: [ 23.521759] Registered led device: rt2500usb-phy0::radio Dec 13 19:17:47 quackbeast kernel: [ 23.521824] Registered led device: rt2500usb-phy0::quality Dec 13 19:17:47 quackbeast kernel: [ 23.524740] usbcore: registered new interface driver rt2500usb Dec 13 19:17:47 quackbeast NetworkManager[798]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2500usb' ifindex: 4) Seems to be autoloading. So this means that even if I pull it out, remove the module, and get it working, it still won't work when its plugged in all the time. More info: lordquackstar@quackbeast:/etc/modprobe.d$ sudo lshw -C Network *SNIP* *-network description: Wireless interface physical id: 1 bus info: usb@1:2 logical name: wlan0 serial: 00:12:17:9b:f3:1e capabilities: ethernet physical wireless configuration: broadcast=yes driver=rt2500usb driverversion=2.6.35-24-generic firmware=N/A link=no multicast=yes wireless=IEEE 802.11bg USB: lordquackstar@quackbeast:/etc/modprobe.d$ lsusb | grep -i rt Bus 001 Device 003: ID 13b1:000d Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB] Any suggestions on how to either fix the rt2x00usb driver or permanently block it from loading? Note that I already have ndiswrapper installed

  Read the article

• Idera SQL Doctor 3.0 and MS SQL Changes

  New features worth mentioning in SQL doctor 3.0 begin with a new server dashboard that not only gives a comprehensive overview of a SQL Server instance's current health, but also several key details to help database administrators. Some of the details include recommendations on how to optimize server configuration, how to fix certain security issues, and how to get rid of performance bottlenecks. The latest version of SQL doctor also supplies users with key server information. The status of system parameters known to affect SQL Server performance, such as processes, disk partitions, cache, m...

  Read the article

• SQL Server to sql server linked server setup

  - by ScottStonehouse

  Please explain what is required to set up a SQL Server linked server. Server A is SQL 2005 windows logins only Server B is the same (SQL 2005 windows logins only) Server A runs windows XP Server B runs Windows Server 2003 Both SQL Server services are running under the same domain account. I am logged into my workstation with a domain account that has administrative rights on both SQL Servers. Note these are both SQL Server 2005 SP2 - I've had old hotfixes pointed out to me, but those are already applied. The issue I am having is this error: "Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. (Microsoft SQL Server, Error: 18456)"

  Read the article

• linked-server sql - access

  - by user22121

  Hi, I have a SQL server 2000 and an Access database mdb connected by Linked server on the other hand I have a program in c # that updates data in a SQL table (Users) based data base access. When running my program returns the following error message: OLE DB provider 'Microsoft.Jet.OLEDB.4.0' reported an error. Authentication failed. [OLE / DB provider returned message: Can not start the application. Missing information file of the working group or is opened exclusively by another user.] OLE DB error trace [OLE / DB Provider 'Microsoft.Jet.OLEDB.4.0' IDBInitialize:: Initialize returned 0x80040E4D: Authentication failed.] . Both the program, the sql server and database access are on a remote server. On the local server the problem was solved by running the following: "sp_addlinkedsrvlogin 'ActSC', 'false', NULL, 'admin', NULL". Try on the remote server the next, without result: "sp_addlinkedsrvlogin 'ActSC', true, null, 'user', 'pass'". On the remote server and from the "Query Analyzer" sql update statements are working correctly. Can you think of what may be the problem? Thanks!

  Read the article

• Use SQL to filter the results of a stored procedure

  - by Ben McCormack

  I've looked at other questions on Stack Overflow related to this question, but none of them seemed to answer this question clearly. We have a system Stored Procedure called sp_who2 which returns a result set of information for all running processes on the server. I want to filter the data returned by the stored procedure; conceptually, I might do it like so: SELECT * FROM sp_who2 WHERE login='bmccormack' That method, though, doesn't work. What are good practices for achieving the goal of querying the returned data of a stored procedure, preferably without having to look of the code of the original stored procedure and modify it.

  Read the article

• SQL Server 2000 tables

  - by user40766

  We currently have an SQL Server 2000 database with one table containing data for multiple users. The data is keyed by memberid which is an integer field. The table has a clustered index on memberid. The table is now about 200 million rows. Indexing and maintenance are becoming issues. We are debating splitting the table into one table per user model. This would imply that we would end up with a very large number of tables potentially upto the 2,147,483,647, considering just positive values. My questions: Does anyone have any experience with a SQL Server (2000/2005) installation with millions of tables? What are the implications of this architecture with regards to maintenance and access using Query Analyzer, Enterprise Manager etc. What are the implications to having such a large number of indexes in a database instance. All comments are appreciated. Thanks

  Read the article

• SQL Server instance shuts down

  - by user42119

  I'm currently developing a new ASP.NET project hosted on a Windows Server 2008 RC2 with an SQL Server 2008 Express database. I have three SQL Server instances (for different purposes) running which currently all contain a single database. For apparently no reason, these instances tend to shut down after some days. There might be low or no traffic to these instances, because there might be some days in a row, where I can't develop. It now occurred several times, that one or two of these three instances just shut down, so that I can't access the database, without manually starting the instance. I can't seem to find a event log entry for the shutdown, which is most likely because I just enabled logging (why is the default setting off?). So the questions are: * Why does an SQL Server instance shut down? (Is there such a thing as a "Shut down instance after 3 days of inactivity"? * How can I achieve that the instances are running 24/7? Edit: I solved this problem by writing my own application that checks for the status of the SQL Server services. My program will start via a batch file, that gets called by the Windows Task Scheduler every 5 minutes.

  Read the article

• Replication with SQL Server 2005 Express Edition and SQL Compact Edition 3.5

  - by Andy Gable

  I need some information on SQL Server 2005 Express edition. What I want to do is have my central database servin local machine databases IE back office Cental database |------------------- Shop floor Terminal 1 |------------------- Shop Floor Terminal 2 |------------------- Shop Floor Terminal 3 |------------------- Shop Floor Terminal 4 |------------------- Shop Floor Terminal 5 |------------------- Shop Floor Terminal 6 I want is so that Shop floor terminals would PULL down ANY changes to the database as and when they happen (selected changes are needed change would be Add new item / Edit Item info that is used by Shop floor terminal (ie price, description, sale group) Is this possible with SQL 2005? I have the ability to make my own Sync Applciation but I would need to know what to look for in the database that trigers a update Many thanks for any advice you can give Andy

  Read the article

• Advantages of multiple SQL Server files with a single RAID array

  - by Dr Giles M

  Originally posted on stack overflow, but re-worded. Imagine the scenario : For a database I have RAID arrays R: (MDF) T: (transaction log) and of course shared transparent usage of X: (tempDB). I've been reading around and get the impression that if you are using RAID then adding multiple SQL Server NDF files sitting on R: within a filegroup won't yeild any more improvements. Of course, adding another raid array S: and putting an NDF file on that would. However, being a reasonably savvy software person, it's not unthinkable to hypothesise that, even for smaller MDFs sitting on one RAID array that SQL Server will perform growth and locking operations (for writes) on the MDF, so adding NDFs to the filegroup even if they sat on R: would distribute the locking operations and growth operations allowing more throughput? Or does the time taken to reconstruct the data from distributed filegroups outweigh the benefits of reduced locking? I'm also aware that the behaviour and benefits may be different for tables/indeces/log. Is there a good site that distinguishes the benefits of multiple files when RAID is already in place?

  Read the article

• SQL Server Column Level Encryption - Rotating Keys

  - by BarDev

  We are thinking about using SQL Server Column (cell) Level Encryption for sensitive data. There should be no problem when we initially encryption the column, but we have requirements that every year the Encryption Key needs to change. It seems that this requirement may be problem. Assumption: The table that includes the column that has sensitive data will have 500 million records. Below are the steps we have thought about implementing. During the encryption/decryption process is the data online, and also how long would this process take? Initially encrypt the column New Year Decrypt the column Encrypt the column with new key. Question : When the column is being decrypted/encrypted is the data online (available to be query)? Does SQL Server provide feature that allows for key changes while the data is online? BarDev

  Read the article

• Sql Server 2008 Create Foreign Key Manually

  - by tgriffiths

  I have inherited an old database which wasn't designed very well. It is a Sql Server 2008 database which is missing quite a lot of Foreign Key relationships. Below shows two of the tables, and I am trying to manually create a FK relationship between dbo.app_status.status_id and dbo.app_additional_info.application_id I am using SQL Server Management Studio when trying to create the relationship using the query below USE myDatabase; GO ALTER TABLE dbo.app_additional_info ADD CONSTRAINT FK_AddInfo_AppStatus FOREIGN KEY (application_id) REFERENCES dbo.app_status (status_id) ON DELETE CASCADE ON UPDATE CASCADE ; GO However, I receive this error when I run the query The ALTER TABLE statement conflicted with the FOREIGN KEY constraint "FK_AddInfo_AppStatus". The conflict occurred in database "myDatabase", table "dbo.app_status", column 'status_id'. I am wondering if the query is failing because each table already contains approximately 130,000 records? Please help. Thanks.

  Read the article

• Validate a string in a table in SQL Server - CLR function or T-SQL

  - by Ashish Gupta

  I need to check If a column value (string) in SQL server table starts with a small letter and can only contain '_', '-', numbers and alphabets. I know I can use a SQL server CLR function for that. However, I am trying to implement that validation using a scalar UDF and could make very little here...I can use 'NOT LIKE', but I am not sure how to make sure I validate the string irrespective of the order of characters or in other words write a pattern in SQL for this. Am I better off using a SQL CLR function? Any help will be appreciated.. Thanks in advance Thank you everyone for their comments. This morning, I chose to go CLR function way. For the purpose of what I was trying to achieve, I created one CLR function which does the validation of an input string and have that called from a SQL UDF and It works well. Just to measure the performance of t-SQL UDF using SQL CLR function vs t- SQL UDF, I created a SQL CLR function which will just check if the input string contains only small letters, it should return true else false and have that called from a UDF (IsLowerCaseCLR). After that I also created a regular t-SQL UDF(IsLowerCaseTSQL) which does the same thing using the 'NOT LIKE'. Then I created a table (Person) with columns Name(varchar) and IsValid(bit) columns and populate that with names to test. Data :- 1000 records with 'Ashish' as value for Name column 1000 records with 'ashish' as value for Name column then I ran the following :- UPDATE Person Set IsValid=1 WHERE dbo.IsLowerCaseTSQL (Name) Above updated 1000 records (with Isvalid=1) and took less than a second. I deleted all the data in the table and repopulated the same with same data. Then updated the same table using Sql CLR UDF (with Isvalid=1) and this took 3 seconds! If update happens for 5000 records, regular UDF takes 0 seconds compared to CLR UDF which takes 16 seconds! I am very less knowledgeable on t-SQL regular expression or I could have tested my actual more complex validation criteria. But I just wanted to know, even I could have written that, would that have been faster than the SQL CLR function considering the example above. Are we using SQL CLR because we can implement we can implement lot richer logic which would have been difficult otherwise If we write in regular SQL. Sorry for this long post. I just want to know from the experts. Please feel free to ask if you could not understand anything here. Thank you again for your time.

  Read the article

• Validate a string in a table in SQL Server - CLR function or T-SQL (Question updated)

  - by Ashish Gupta

  I need to check If a column value (string) in SQL server table starts with a small letter and can only contain '_', '-', numbers and alphabets. I know I can use a SQL server CLR function for that. However, I am trying to implement that validation using a scalar UDF and could make very little here...I can use 'NOT LIKE', but I am not sure how to make sure I validate the string irrespective of the order of characters or in other words write a pattern in SQL for this. Am I better off using a SQL CLR function? Any help will be appreciated.. Thanks in advance Thank you everyone for their comments. This morning, I chose to go CLR function way. For the purpose of what I was trying to achieve, I created one CLR function which does the validation of an input string and have that called from a SQL UDF and It works well. Just to measure the performance of t-SQL UDF using SQL CLR function vs t- SQL UDF, I created a SQL CLR function which will just check if the input string contains only small letters, it should return true else false and have that called from a UDF (IsLowerCaseCLR). After that I also created a regular t-SQL UDF(IsLowerCaseTSQL) which does the same thing using the 'NOT LIKE'. Then I created a table (Person) with columns Name(varchar) and IsValid(bit) columns and populate that with names to test. Data :- 1000 records with 'Ashish' as value for Name column 1000 records with 'ashish' as value for Name column then I ran the following :- UPDATE Person Set IsValid=1 WHERE dbo.IsLowerCaseTSQL (Name) Above updated 1000 records (with Isvalid=1) and took less than a second. I deleted all the data in the table and repopulated the same with same data. Then updated the same table using Sql CLR UDF (with Isvalid=1) and this took 3 seconds! If update happens for 5000 records, regular UDF takes 0 seconds compared to CLR UDF which takes 16 seconds! I am very less knowledgeable on t-SQL regular expression or I could have tested my actual more complex validation criteria. But I just wanted to know, even I could have written that, would that have been faster than the SQL CLR function considering the example above. Are we using SQL CLR because we can implement we can implement lot richer logic which would have been difficult otherwise If we write in regular SQL. Sorry for this long post. I just want to know from the experts. Please feel free to ask if you could not understand anything here. Thank you again for your time.

  Read the article

• SQL Server and Hyper-V Dynamic Memory Part 3

  - by SQLOS Team

  In parts 1 and 2 of this series we looked at the basics of Hyper-V Dynamic Memory and SQL Server memory management. In this part Serdar looks at configuration guidelines for SQL Server memory management. Part 3: Configuration Guidelines for Hyper-V Dynamic Memory and SQL Server Now that we understand SQL Server Memory Management and Hyper-V Dynamic Memory basics, let’s take a look at general configuration guidelines in order to utilize benefits of Hyper-V Dynamic Memory in your SQL Server VMs. Requirements Host Operating System Requirements Hyper-V Dynamic Memory feature is introduced with Windows Server 2008 R2 SP1. Therefore in order to use Dynamic Memory for your virtual machines, you need to have Windows Server 2008 R2 SP1 or Microsoft Hyper-V Server 2008 R2 SP1 in your Hyper-V host. Guest Operating System Requirements In addition to this Dynamic Memory is only supported in Standard, Web, Enterprise and Datacenter editions of windows running inside VMs. Make sure that your VM is running one of these editions. For additional requirements on each operating system see “Dynamic Memory Configuration Guidelines” here. SQL Server Requirements All versions of SQL Server support Hyper-V Dynamic Memory. However, only certain editions of SQL Server are aware of dynamically changing system memory. To have a truly dynamic environment for your SQL Server VMs make sure that you are running one of the SQL Server editions listed below: ·         SQL Server 2005 Enterprise ·         SQL Server 2008 Enterprise / Datacenter Editions ·         SQL Server 2008 R2 Enterprise / Datacenter Editions Configuration guidelines for other versions of SQL Server are covered below in the FAQ section. Guidelines for configuring Dynamic Memory Parameters Here is how to configure Dynamic Memory for your SQL VMs in a nutshell: Hyper-V Dynamic Memory Parameter Recommendation Startup RAM 1 GB + SQL Min Server Memory Maximum RAM > SQL Max Server Memory Memory Buffer % 5 Memory Weight Based on performance needs   Startup RAM In order to ensure that your SQL Server VMs can start correctly, ensure that Startup RAM is higher than configured SQL Min Server Memory for your VMs. Otherwise SQL Server service will need to do paging in order to start since it will not be able to see enough memory during startup. Also note that Startup Memory will always be reserved for your VMs. This will guarantee a certain level of performance for your SQL Servers, however setting this too high will limit the consolidation benefits you’ll get out of your virtualization environment. Maximum RAM This one is obvious. If you’ve configured SQL Max Server Memory for your SQL Server, make sure that Dynamic Memory Maximum RAM configuration is higher than this value. Otherwise your SQL Server will not grow to memory values higher than the value configured for Dynamic Memory. Memory Buffer % Memory buffer configuration is used to provision file cache to virtual machines in order to improve performance. Due to the fact that SQL Server is managing its own buffer pool, Memory Buffer setting should be configured to the lowest value possible, 5%. Configuring a higher memory buffer will prevent low resource notifications from Windows Memory Manager and it will prevent reclaiming memory from SQL Server VMs. Memory Weight Memory weight configuration defines the importance of memory to a VM. Configure higher values for the VMs that have higher performance requirements. VMs with higher memory weight will have more memory under high memory pressure conditions on your host. Questions and Answers Q1 – Which SQL Server memory model is best for Dynamic Memory? The best SQL Server model for Dynamic Memory is “Locked Page Memory Model”. This memory model ensures that SQL Server memory is never paged out and it’s also adaptive to dynamically changing memory in the system. This will be extremely useful when Dynamic Memory is attempting to remove memory from SQL Server VMs ensuring no SQL Server memory is paged out. You can find instructions on configuring “Locked Page Memory Model” for your SQL Servers here. Q2 – What about other SQL Server Editions, how should I configure Dynamic Memory for them? Other editions of SQL Server do not adapt to dynamically changing environments. They will determine how much memory they should allocate during startup and don’t change this value afterwards. Therefore make sure that you configure a higher startup memory for your VM because that will be all the memory that SQL Server utilize Tune Maximum Memory and Memory Buffer based on the other workloads running on the system. If there are no other workloads consider using Static Memory for these editions. Q3 – What if I have multiple SQL Server instances in a VM? Having multiple SQL Server instances in a VM is not a general recommendation for predictable performance, manageability and isolation. In order to achieve a predictable behavior make sure that you configure SQL Min Server Memory and SQL Max Server Memory for each instance in the VM. And make sure that: ·         Dynamic Memory Startup Memory is greater than the sum of SQL Min Server Memory values for the instances in the VM ·         Dynamic Memory Maximum Memory is greater than the sum of SQL Max Server Memory values for the instances in the VM Q4 – I’m using Large Page Memory Model for my SQL Server. Can I still use Dynamic Memory? The short answer is no. SQL Server does not dynamically change its memory size when configured with Large Page Memory Model. In virtualized environments Hyper-V provides large page support by default. Most of the time, Large Page Memory Model doesn’t bring any benefits to a SQL Server if it’s running in virtualized environments. Q5 – How do I monitor SQL performance when I’m trying Dynamic Memory on my VMs? Use the performance counters below to monitor memory performance for SQL Server: Process - Working Set: This counter is available in the VM via process performance counters. It represents the actual amount of physical memory being used by SQL Server process in the VM. SQL Server – Buffer Cache Hit Ratio: This counter is available in the VM via SQL Server counters. This represents the paging being done by SQL Server. A rate of 90% or higher is desirable. Conclusion These blog posts are a quick start to a story that will be developing more in the near future. We’re still continuing our testing and investigations to provide more detailed configuration guidelines with example performance numbers with a white paper in the upcoming months. Now it’s time to give SQL Server and Hyper-V Dynamic Memory a try. Use this guidelines to kick-start your environment. See what you think about it and let us know of your experiences. - Serdar Sutay Originally posted at http://blogs.msdn.com/b/sqlosteam/

  Read the article

• Problem with MS DTC on SQL2008 win server 2k8 with linked server from sql2000 win server 2k

  - by user31648

  Hi, We have migrated our db from sql2000 win server 2k to sql2008 win server 2k8. We have linked server from sql2000 win server 2k. By our opinion the problem is with DTC and we have made a lot of setting that we found as solution for our problem, but still the problem exist. There is no any error or worning or information niether in the sql log nor in win event viewer. The application is hanging out and at the end the time out exception is shown. What we have done till now: Enable Network DTC Access with inbound and outbound with No Authentication Required on win 2k8 We have opened RPC dynamic port allocation through registry on 2k and 2k8 We have entered subkey TurnOffRpcSecurity in the registry HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSDTC and made it enable on 2k and 2k8 We have added exception for DTC in firewall for all entities What we have notice that when we restart SQL service and make the first try for our transaction the following is shown: "Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required." and after it: "Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required." Does someone have any idea what else can be done in order to solve the problem? Thanks in advance. Regards, Snezana

  Read the article

• SQL 2008 Database tuning advisor won’t start

  - by Andrew Hancox

  For some reason I can't get DTA to connect to my development machine. It connects to a remote DB just fine but when I point it to my dev machine I get an error saying: Failed to initialize MSDB database for tuning (exit code: -1073741819). I'm pretty sure it's not a permissions issue since I've used profiler to capture what it's doing and all of the commands it's run so far look fine and are being run under my account which is associated with the sysadmin role, when I run them in sql management studio they go through fine. I'm pretty convinced that the problem is related to creating the objects in MSDB that are used by DTA but I tried creating these manually (I found scripts on the web) and it just seems to push the problem along the line slightly. I'm going out of my mind - have even tried reinstalling SQL but that's not fixed it. I'm using SQL 2008 with SP1 (10.0.2531) on windows server 2008 (patched up to date). SAVE ME!!!!!

  Read the article

• SQL 2008 managing 2 Instances on single Physical server

  - by Rajeev

  Hi, I need some calrification about managing SQL server 2008. The scenario is as follows: I have One Windows Physical server at Primary site, I want to have Two different applications database on it, so shall I create two Instances on same server or shall have diffenrent server for another database. First Database is for management purpose while second would be used for Reporting purpose. There is a second database at the secondary site, which will be in Passive mode and I intend to connect them through MSCS. Now, can I have both Instances on Single server and both will work fine? The management database will be used more. Please reply soon. Can both Instances have dedicated reources allocated to them?

  Read the article

• redirecting in node.js behind mod_rewrite proxy

  - by chmanie

  I have a node.js application running behind an Apache mod_rewrite proxy configured in a .htaccess file like this: RewriteCond %{HTTP_HOST} =mydomain.com [OR] RewriteCond %{HTTP_HOST} =www.mydomain.com RewriteRule (.*) http://localhost:3000/$1 [QSA,P] When I now do a redirect (e.g. express' res.redirect()) inside my node.js application (which runs on port 3000), the user is always redirected to http://localhost:3000/ (which is in fact exactly what is defined above but not the desired behaviour). Is there any way around this?

  Read the article

• Now Customers Can Actually Locate Your Resources with URL Rewriter 2.0 RTW

  - by The Official Microsoft IIS Site

  Today, Microsoft announced the final release of IIS URL Rewriter 2.0 RTW . Now the first reason might be obvious why you would want to rewrite a URL – when you are at a cocktail party with loud music and tasty appetizers and a potential customer asks you where they can get more info on your snazzy new idea. And you proudly blurt out next to their ear over the roar of the bass, “Just go to h-t-t-p colon slash slash w-w-w dot my new idea dot com slash items dot a-s-p-x question mark cat ID equals new...(read more)

  Read the article

• SQL Server: How to shrink FileStream files?

  - by J4N

  For a project, I'm using a SQL Server 2008 R2. One table has a filestream column. I've made some load tests, and now the database has ~20GB used. I've empty tables, except several(configuration tables). But my database was still using a lot of space. So I used the Task -> Shrink -> Database / Files But my database is still using something like 16GB. I found that it's the filestream file is still using a lot of space. The problem is that I need to backup this database to export it on the final production server, and event if I indicate to compress the backup I got a file more than 3.5Go. Not convenient to store and upload. And I'm planning much bigger test, so I want to know how to shrink that empty space. When I'm trying: I get this exception: The properties SIZE, MAXSIZE, or FILEGROWTH cannot be specified for the FILESTREAM data file 'FileStreamFile'. (Microsoft SQL Server, Error: 5509) So what should I do? I found several topics with this error but they was about removing the filestream column.

  Read the article

• a server side mustache.js example using node.js

  - by onecoder4u

  I'm looking for an example using mustache.js with node.js here is my example but it is not working. Mustache is undefined. I'm using Mustache.js from the master branch. var sys = require('sys'); var m = require("./mustache"); var view = { title: "Joe", calc: function() { return 2 + 4; } }; var template = "{{title}} spends {{calc}}"; var html = Mustache().to_html(template, view); sys.puts(html);

  Read the article

• SQL Server 2008: Can't connect to remote server via management studio but can telnet in fine

  - by WarpKid

  Hi, I am in the process of trying to configure SQL Server 2008 to accept remote connections. I have been through all the documentation I can find and yet when I attempt to connect through management studio I get an error stating that the server could not be found. Interestingly I can connect through telnet to the remote server via the port that sql server is listening on. In the SQL Server logs I can see the connection attempt. So SQL Server is up and running and listening on the correct port - no firewall blocking it. It would appear that by default SQL Server is listening on port 50314 by default but management studio attempts to connect on port 1433.Weird. Server Management Studio = no dice. Anyone got any ideas? Server is set to allow remote connections - TCP IP is enabled, firewall is off. Thanks UPDATE FOR TO CLEAR THINGS UP A BIT We are seeing the connection attempt when we telnet in on port 50314 in the sql server logs. When we login through management studio we see it attempting connection on port 1433. There is no sign of this connection attempt in the logs.

  Read the article

• How to join dynamic sql statement in variable with normal statement

  - by Oliver

  I have a quite complicated query which will by built up dynamically and is saved in a variable. As second part i have another normal query and i'd like to make an inner join between these both. To make it a little more easier here is a little example to illustrate my problem. For this little example i used the AdventureWorks database. Some query built up dynamically (Yes, i know here is nothing dynamic here, cause it's just an example.) DECLARE @query AS varchar(max) ; set @query = ' select HumanResources.Employee.EmployeeID ,HumanResources.Employee.LoginID ,HumanResources.Employee.Title ,HumanResources.EmployeeAddress.AddressID from HumanResources.Employee inner join HumanResources.EmployeeAddress on HumanResources.Employee.EmployeeID = HumanResources.EmployeeAddress.EmployeeID ;'; EXEC (@query); The normal query i have select Person.Address.AddressID ,Person.Address.City from Person.Address Maybe what i'd like to have but doesn't work select @query.* ,Addresses.City from @query as Employees inner join ( select Person.Address.AddressID ,Person.Address.City from Person.Address ) as Addresses on Employees.AddressID = Addresses.AddressID

  Read the article

• sql 2008 metadata modified date

  - by Kumar

  Is there a way to identify the timestamp when an object(table/view/stored proc...) was modified ? there's a refdate in sysobjects but it's always the same as crdate atleast in my case and i know that alter view/alter table/alter proc commands have been run many times post creation

  Read the article

• Having problems with connecting to/seeing the local SQL server with Microsoft SQL Server Management Studio

  - by Hans-Henrik

  I'm having some difficulties when I'm trying to connect to my local SQL Server. I'm pretty sure the server is running (many of the other topics on this subject suggests that the services might not be running, so I kinda looked into it, but they do seem to be running). But when I try to access it through Microsoft SQL Server Management Studio it doesn't seem to be able to find them. Server type: Database Engine Server name: ILIZANESQL* - I'm trying to "browse for more..." to find my server, but it doesn't show up Authentication: Windows Authentication

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >