Search Results

Search found 16587 results on 664 pages for 'virtual hardware'.

Page 442/664 | < Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >

• Can I get redundancy with a JBOD storage subsystem

  - by Dat Chu

  I have a Promise Technology J610S. This is a JBOD subsystem. Is it possible for me to buy a SAS hardware RAID controller and provide some type of redundancy for these drives? I am unsure whether I will use Linux or Windows yet so an answer with enumeration for both would be highly appreciated. One solution that I thought of was: if my J610s can export each drive as a target, my server will simply see 16 drives. The RAID controller can then perform the RAID5/RAID6 if I want.

  Read the article

• Windows 7 x64 Hard Freezing (again)

  - by Lanissum

  Awhile ago, my computer was randomly freezing a few minutes after booting, and I ended up replacing the CPU and mobo after testing the RAM and hard drive, I also couldn't find anything wrong with the video card. So after replacing the presumably faulty hardware, everything worked fine for about a month and a half. All of a sudden, My computer is randomly freezing a few minutes after loading up any intensive application (games, mostly). Most of the time it just freezes with the current frame until I hard reset, although once it printed a BSOD message stating that dxgmms1.sys was to blame. The only difference between these two episodes I can think of is that I can do word/internet/work without issue now, as opposed to the near uselessness my computer was rendered last time. For those of you who want to know, I tested my memory with memtest86 (for 64 bit machines). I can't figure out what could have started this latest round of issues, the event logger just states that a kernel-power event has occurred (like last time) but I think thats just a generic "this machine has rebooted after a sudden shutdown" message.

  Read the article

• How to authorize standard users to install drivers

  - by Dr I

  I'm currently looking for a way to autorize my non administrators users to perform an installation of drivers. Here is the speech: All my users are standard users, they got a VirtualBox Hypervisor if they need the administrator rights. But if they put an USB device on the local machine and try to redirect the device to the Virtual Machine, Windows ask for some Administrator rights. I've try to set up those GPO: -Allow standard users to install drivers. -Install WHQL Drivers: Allow Silently. I don't know how to do this.

  Read the article

• Need help upgrading MacBookPro3,1 RAM to 4GB.

  - by Fantomas

  My questions are: 1) Where to buy it and what to buy? I have heard that this RAM is generic enough and it does not have to come from Apple. 2) Can I reuse my existing stick(s)? Would I have a single 2GB module, or 2 x 1GB modules? 3) If I have 2GB already, is it a good idea to have one old stick and one new one? Which one is better placed at the top and which one at the bottom? Let me know what questions you have. My computer's info: Hardware Overview: Model Name: MacBook Pro Model Identifier: MacBookPro3,1 Processor Name: Intel Core 2 Duo Processor Speed: 2.4 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache: 4 MB Memory: 2 GB Bus Speed: 800 MHz Boot ROM Version: MBP31.0070.B07 SMC Version (system): 1.16f11

  Read the article

• Slowness on Exchange 2007 Server (network related we think)

  - by Az

  We are seeing some odd behavior out of our exchange 2007 server. I believe it is network related as during the slowness in response from the exchange server. During these times downloading files to server is fraught with connection resets and extreme slow download speeds that are not affecting other servers right on the same subnet with the same gateway and ISP. We have about 50 users at a time using Outlook 2003 from a terminal server not displaying any other signs of slowness, all network slowness is confirmed trying downloads on the exchange server itself. Checked for virus issues, there are none. Checked for hardware issues, none found I am noticing between 200-400 TCPv4 connections established I am seeing around 100k tcpv4(active) connections according to perfmon are these numbers odd? Has anyone run into anything similar? Our server has a gigbabit NIC linked to a gigabit switch using cat6 so I do not believe it is "physical". Thanks!

  Read the article

• Prevalence of WMI enabled in real Windows Server networks

  - by TripleAntigen

  Hi I would like to get opinions from systems administrators, on how common it is that WMI functionality is actually enabled in corporate networks. I am writing an enterprise network application that could benefit from the features of WMI, but I noted after creating a virtual network based on Server 2008 R2, that WMI seems to be disabled by default. Do systems admins in practical corporate networks enable WMI? Or is it usually disabled for security purposes? What is it used for if it is enabled? Thanks for any advice! MORE INFO: I should have said, I really need to be able to query the workstations but I understand that by default the WMI ports on Win7 and XP firewalls (at least) are disallowed, so do you use some sort of group policy or other method to leave a hole open for WMI on the workstations? Or is just the servers that are of interest? Thanks for the responses!!

  Read the article

• What are steps to upgrade an cisco UCS B series system vmware vsphere from 4.1 to 5.0

  - by Gk.

  I have a Cisco UCS B-series system with 1.4 firmware running vsphere 4.1 (ESX) + Nexus 1000V. I want upgrade all that stuff to vsphere 5.0 without downtime. I tried to find any documentation describe all steps needed to do it, but cannot found anything clear. Here is my plan: Upgrade firmware of UCS from 1.4 to 2.0. Doc: http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/upgrading/from1.4/to2.0/b_UpgradingCiscoUCSFrom1.4To2.0.html Upgrade all vcenter, hosts+VEM, virtual machines, datastores using VMWare best practice. Is it OK? Am I missing something? Thank you, giobuon.

  Read the article

• Default Webcam Driver Issues

  - by Omegaclawe

  I'm having troubles getting my monitor-attached webcam (ASUS VK248H) to install on my new computer. On the old computer, it was a matter of not using a USB 3.0 port, but I can't get anything to work on the new one. I have tried all manner of uninstalling/reinstalling the driver and resetting the computer, as well as literally every USB port on the computer (14 in total). It's not that windows isn't recognizing the device; it most certainly is. However, comparing it to the old computer's driver details, on the new computer, it is not using the ksthunk.sys driver in addition to the usbvideo.sys driver, like on the old (working) computer. Naturally, I figured the way ahead was to simply get this other driver to work with the hardware, but haven't really found out a way to do that. Does anyone know of a way I can force it to use ksthunk.sys? It seems rather difficult to get it to install anything when Windows is feeling that everything is peachy.

  Read the article

• VirtualBox: VBoxManage modifyhd hosting on mac os x resize not supported

  - by dwstein

  I am a complete newbie. i'm hosting VM on OS X using virtualbox. I'm trying to resize the virtual hard drive by using the following command in the terminal. VBoxManage modifyhd "<absolute path including name and extension>" --resize 20480 I used a disk size of 25480 (i'm not really sure how to pick the correct size. and I got the following error: Progress state: VBOX_E_NOT_SUPPORTED VBoxManage: error: Resize hard disk operation for this format is not implemented yet! virtualbox version 4.1.18 I don't really even know what to ask. What am I doing wrong?

  Read the article

• VMware ESX 3.5 Host Health shown as unknown

  - by dunxd

  I have an ESX 3.5 update 5 cluster of five host servers, all fully patched as of this Friday. Today I noticed that one of the servers has the Hardware Health status as unknown in Virtual Center Infrastructure Client. When I look at the Health Status view under configuration for that host, all the items are status Unknown. The server is exactly the same configuration as the others - same model (HP DL360 G5), memory, NICs etc. I have tried restarting the management service with service mgmt-vmware restart but this has not resolved the issue. Asides from this, I am not seeing any issues with the cluster - however, I hate having a blind spot like this. Any ideas?

  Read the article

• Blocked port 25 on Windows 7 64 bit

  - by Michal Gow

  Strange problem. I have 2 computers connected to Wifi router. One with Windows Vista & second with 2 operating systems: SUSe Linux and Windows 7 64bit on it. Computer with Vista can connect to SMTP server of my email provider (and any other) using port 25, and can connect to a mail server using telnet mail.server.com 25 if this port is open. Computer with dual operating system can (using Linux) do the same. The same computer, with the same hardware (Wifi card etc.), and using the same WiFi router, cannot however use Port 25 and cannot Telnet into any smtp server. So the problem is in Windows 7. I did uninstall all antivirus software and disabled the firewall. The problem is still here. Is there way how find out which software is blocking this port?

  Read the article

• Openfire Installation Issue - Can't Login to admin panel

  - by Lobe

  I am trying to get Openfire to install on an Ubuntu virtual machine, however upon completing the web based installer, I am unable to login to the admin panel. So far I: downloaded Debian installer Installed using stock options Added database and built the structure using supplied SQL file Completed web based installer I am now trying to login using username: admin and my password, however I constantly get a wrong username/password error. There is a record generated in the MySQL database showing the admin user with an encrypted password, and changing to an unencoded password doesn't work. What is the problem here?

  Read the article

• How do I remote desktop to my work's Windows box from my Mac at home through VPN?

  - by CT

  I would like to remote desktop from my Macbook to my Work's laptop from home. I connect to the work's network via Cisco VPN. My Cisco VPN clients connects fine in Mac OS X but I am unable to remote desktop. I am also unable to ping my work laptop. The laptop is powered on and not sleeping. I can access it via LogMeIn. If I were to actually pug into our network at the building. I can remote desktop to my work laptop from my Macbook. If I use a Windows virtual machine and connect using the Windows Cisco VPN client, I am able to RDP and ping my work laptop. What is wrong with my OS X VPN connection?

  Read the article

• <authentication mode=“Windows”/>

  - by kareemsaad

  I had this error when I browse new web site that site sub from sub http://sharp.elarabygroup.com/ha/deault.aspx ha is new my web site Configuration Error Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately. Parser Error Message: It is an error to use a section registered as allowDefinition='MachineToApplication' beyond application level. This error can be caused by a virtual directory not being configured as an application in IIS. Source Error: Line 61: ASP.NET to identify an incoming user. Line 62: -- Line 63: Line 64: section enables configuration Line 65: of what to do if/when an unhandled error occurs I note other web site as sub from sub hadn't web.config is that realted with web.config and all subs and domain has one web.config

  Read the article

• Create a VHD from a physical XP machine

  - by runxc1

  I am looking at upgrading from Windows XP to Windows7. I have a lot of development programs that would take 2-3 days to set-up configure etc. etc. when I get my new machine. What I want to do is create a VHD of my physical XP machine install Windows 7 and then operate out of my Virtual PC while I take the time to configure Windows 7. Is this possible to do? If so how do you do it?

  Read the article

• Chromium OS Lime installation confusion

  - by Abhinav Kulshreshtha

  I Used to download Chromium Vanilla build Virtual-box image from hexxeh. recently i wanted to try Lime build which only gives a .img file. I used the mentioned Windows Image Writer (link given on the lime website.) and a 8GB Transcend Website. When i tried to boot from pen-drive, the screen only flashed and nothing happened. Now when i tried to access my pendrive, it shows only 0.99 gb capacity. What happened wrong. How can i recover my pendrive. I tried to create vdi using VBoxManage.exe convertdd chromiumos.img chromiumos.vdi command given in This link. But it is not running on VBox either.

  Read the article

• Does changing web hosts (changing a domain's nameservers) affect the private nameservers / glue records created under that domain?

  - by Kris

  We currently have a virtual dedicated server with GoDaddy and have 4 domains under it. I ended up creating private nameservers under, say mydomain_a.com, and have ns1.mydomain_a.com and ns2.mydomain_a.com as the nameservers for the other 3 domains. Now, we're thinking of switching web hosts (not domain registrar just the host) which means I have to change mydomain_a.com's nameservers to the new host. Will that affect or mess with the other 3 domains still pointing to ns1.mydomain_a.com and ns2.mydomain_a.com? Will that affect the private nameservers / glue records in anyway? Currently: domain: mydomain_a.com nameservers (GoDaddy): ns1.mydomain_a.com ns2.mydomain_a.com domain: mydomain_b.com nameservers (GoDaddy): ns1.mydomain_a.com ns2.mydomain_a.com After the Change: domain: mydomain_a.com nameservers (Other Host): ns1.some_other_host_ns.com ns2.some_other_host_ns.com This is my Question, Would this be affected? domain: mydomain_b.com nameservers (GoDaddy): ns1.mydomain_a.com ns2.mydomain_a.com

  Read the article

• Restoring files from blueprint on command

  - by Nick

  I am setting up a server. I already have rented a machine running centOS 6 but I have run into a bit of a technical problem with configuring the server software: The server will have some files that it will try to read/write to them but what I need is a way to have a blueprint of these files and everytime the server restarts the files that it used get deleted and replaced by the blueprints. I have heared of a RAM disks or Virtual File Systems but didnt quite understand how they work or how to set them up. The server software is written in java which means bash commands can be run from it. I cannot modify what happens when the server shuts down entirely what I can do is run a command before the server runs the final shutdown save

  Read the article

• How to make a quiet laptop?

  - by psihodelia

  Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be PDF/docs processing, real-time audio processing, web-surfing and Skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend any solution please?

  Read the article

• Windows 7 upgrade advisor issue

  - by Groo

  I am preparing to migrate a pretty old XP machine to Windows 7. I ran the Windows 7 Upgrade Advisor and got a couple of smaller issues (low 512Mb RAM complaints and similar stuff). Apart from that, everything else was shown as compatible, including my old ATI Radeon 9550/X1050 card: ATI Radeon 9550/X1550 Series: This device is compatible with Windows 7. The thing that concerns me is that people around the web seem to be unable to actually find a Windows 7 driver for this card. Even the ATI web page states that this is a legacy device: If the user chooses to, they can install the ATI Catalyst Windows Vista graphics driver under Windows 7. [...] Using the ATI Catalyst Windows Vista driver under Windows 7 is not officially supported by AMD [...] Should I trust the Advisor and continue with the update? Does this mean Microsoft will provide at least a generic driver which will allow hardware acceleration with this card?

  Read the article

• Slow write speeds on new Gigabit home file server

  - by Ryan Holder

  So I finally got all my parts delivered to setup a home file/backup server this week. It's currently running Ubuntu Server and I'm using Samba to share files on my network. The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D). My home desktop is then also connected to this switch and again also through CAT6a cable. Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s. I know this drive is capable is faster speeds so would anybody have an idea of where the bottleneck is? Any help would be greatly appreciated :) EDIT: I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware

  Read the article

• configuring nginx as reverse proxy

  - by user55714

  This isn't directly passenger related..but I am hoping some of you might have tried this for sure so why not ask. I am using passenger with nginx to serve my rails app on a virtual slice host. I am considering putting a reverse proxy for serving static content as well as handling etagged actions. 1 - Can I use my existing nginx installation and just change it to a reverse proxy? Do I even need a web server? What would a typical architecture look like in this case? nginx rev-proxy - nginx web server - passenger? or nginx rev-proxy - passenger? 2 - Is nginx the best choice in this case? 3 - Can my reverse proxy reside on the same slice? Thanks

  Read the article

• How to protect Ruby on Rails code on external server?

  - by Phil Byobu

  I have to deploy a Ruby on Rails Applications on a client's server and I do not want them to be able to view or modify the source code. How would you protect the code technically? I thought about building a linux-based virtual machine with an encrypted filesystem where the application code resides. The client has no root access, or direct access to the system at all. All services start automatically and the application is ready to use. What would you suggest?

  Read the article

• Canon HV20 recognized, but no drivers in Windows 7 x64

  - by Tuminoid

  My Canon HV20 camcorder is properly recognized when connected via Firewire to Windows 7 x64, but no drivers are installed for it. Windows or I cannot locate any drivers for it as, but it should be working off-the-shelf. I googled a lot, and found instructions to set IEEE 1394 host to legacy mode via Device Manager, but Windows doesn't offer me the legacy option at all. If I check the properties of Canon&HV20 device in Other devices section it says The drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element. It used to work just fine on my previous installation of Vista x64 and same hardware :/

  Read the article

• Remote Install Mac OS X from Windows not on LAN?

  - by Frost Shadow

  I want to install applications from my Mac OS X install disc, or be able to archive-install from it, but it's back at my house outside my current LAN. Is there a way I can remotely access my OS X install disc on my home Windows XP computer from my Snow Leopard? In my help manual it says I can do remote installs, or use another computer's disc drive remotely, but it has to be with another computer on the LAN. Is there a way to combine my mac's LAN and my windows' LAN? I think it has something to do with making a VPN; is there a way to do that which will work between Snow Leopard and XP, doesn't require additional hardware, and is preferably free? Thanks a lot!

  Read the article

< Previous Page | 438 439 440 441 442 443 444 445 446 447 448 449  | Next Page >