Search Results

Search found 22332 results on 894 pages for 'internet explorer 8'.

Page 445/894 | < Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >

• DNS and DHCP not agreeing on an IP address

  - by Mr. Jefferson

  I'm having a problem where our Windows Server 2003 domain controller assigns my Windows 7 computer one IP address (x.x.x.75) via DHCP, but reports another (x.x.x.84) via DNS. This causes some interesting behavior on the network. If I change my adapter settings to get IP and DNS addresses from DHCP, I can access the internet, but no one on our network can access my computer. If I change my IP manually to what DNS says it is, I lose my internet access, but everyone can get to my computer again. I know that we have some old, invalid reverse DNS pointers hanging around (a reverse lookup on an IP address often gives more than one result, usually not including the one that is correct), so that could be contributing, but my problem is recent, and the invalid reverse pointers have been around a long time. What's going on, and how do I fix it?

  Read the article

• Can't find instructions how to use Windows 7 drivers on Windows Server 2008 R2

  - by Robert Koritnik

  Windows 7 x64 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 R2 doesn't. Event though it's practically the same OS when it comes to drivers. I know there's a very good reason for this difference. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are usually desktop machines (a bit more powerful though) and would benefit from the whole driver spectrum that Windows 7 offers... Question I know I've been reading on the internet about some trick where you first install Windows 7, than do something to get either all Windows 7 drivers or just those installed, and then install Windows Server 2008 R2 and use those drivers of Windows 7. The thing is I can't find these instructions on the internet any more. If anybody knows where they are please provide the link for the rest of us.

  Read the article

• Should I use 802.11n with a 15 Mbps ISP (Comcast Cable)?

  - by stackoverflowuser2010

  I currently own a LinkSys-WRT54GL 802.11a/b/g wireless router, and my ISP is Comcast Cable providing me with 15 Mbps (that's bits per second, I believe) download speed. I am wondering if there is any benefit with using an 802.11n wireless router to access the Internet? The maximum theoretical speed of the WRT54GL router is 54 Mbps (802.11g), which is faster than the 15 Mbps provided by my ISP. I know that 802.11n has a max bandwidth of 300 Mbps, and it would help for intra-house transfers, such as streaming video from one computer to another. But is there any benefit to 802.11n for Internet activity, such as web browswing, gaming, and streaming video from Netflix?

  Read the article

• Home network with Windows 7 as router

  - by Michael

  Background: I have tried to use routers, but so far all of them can't handle the bandwidth, number of connections eventually limited by the hardware resources, so overall the home routers are decreasing the internet speed. I went through DD-WRT and stuff like that. Question: What I want is to use my Windows7 PC as router. It has 2 LAN cards. I'm going to connect to this router another desktop 2 pcs and notebook through wireless router. The main question is what is the most efficient way to turn this Windows7 box(and I need Windows for native NTFS support) into router with NAT/Routing/Firewall functionality? Is there any routing software recommended for this purpose or I should just use windows native "Internet Sharing"? I'm going to run SIP phones in the LAN, so I need friendly NAT(Full cone perhaps). Also I'm going to have FTP server on that Windows7 "server" PC. As firewall I'm thinking about Comodo. Need to drop all incoming, unless explicitly allowed.

  Read the article

• Can't find instructions how to use Windows 7 drivers on Windows Server 2008 R2

  - by Robert Koritnik

  Maybe I should post this to http://www.serverfault.com. Windows 7 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 doesn't event though it's practically the same OS when it comes to drivers. But I know that this has a very good reason. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are normally desktop machines and would need Windows 7 driver spectrum... Question I know I've been reading about some trick on the internet that first installed Windows 7 on the machine, than do something to get either all Windows 7 driver collection or just those installed, and then install Windows Server 2008 and use those drivers. The thing is: I can't seem to find these instructions on the internet any more. If anybody knows where these are please provide the link for the rest of us.

  Read the article

• Sonicwall networking

  - by Syed

  My Sonicwall LAN subnet is 192.168.1.0/24 X0: LAN IP 192.168.1.253 I also have intranet router 192.168.1.108 routing to 192.168.2.0/24 network. Internet is through WAN (X1) is all working fine. My LAN PC's can connect to intranet 192.168.2.0/24 via static route from LANsubnet to 192.168.2.0/24 as 192.168.1.108 as gateway. Now I have LAN2 10.2.1.254 (10.2.1.0/24)on X4 port. I can access Internet from LAN2, now I want to allow intranet from LAN2. What static routes do I need to make this work?

  Read the article

• Podcasting vs Stack Overflow vs Geekswithblogs

  - by MarkPearl

  For a few years now I have been looking for effective ways to be involved in the “community”. While there are a few community programming events in my area (Johannesberg), there isn’t too much face to face stuff – which has caused me to turn to the internet. My internet attempts have been varied – at first I took the passive approach of listening to tech podcasts. This was great for a while, but soon the content became semi-repetitive and a little boring. It seemed that the podcasts I was listening to all went round the same themes and speakers and while I am still a keen listener to several tech podcasts – it didn’t quench my thirst. So I began to be a bit more active – starting with stack overflow – where I would scan the site for questions that were in the realm of my ability to answer. It worked for a while but soon it began to be discouraging – there seems to be so many people that know so much more than me and are quicker at typing that I felt fairly ineffective. So while I still use Stack Overflow when I am in a pickle and need some help – it feels more like me taking from the community than giving anything. Which brought me to Geeks with blogs. Till I found GWB I hadn’t felt like I was an active part of a community. I had blogged before on Blogspot and Wordpress but hadn’t felt associated to the community. Now when I get a comment from someone on one of my GWB posts either thanking me or adding a bit more or correcting me, it makes me feel like I am contributing to a community. So well done GWB. Thanks for making a spot that makes me feel at home!

  Read the article

• Wireless network not working Linux Mint

  - by zharvey

  I have a home LAN that I am confident is working properly (I have a Windows 7 and an Ubuntu Desktop machine that both see the router and a working Internet connection). I just installed Linux Mint (Maya) on a new machine and although I can connect to the Internet via a wired (ethernet) connection, it does not see my wireless network. In fact, as you can see in the screenshot below, it doesn't even look like it has the drivers to be able to detect a wireless network... I have ran update manager and made sure that I am up-to-date with everything and have restarted. Any ideas here?!?

  Read the article

• Bind DHCP Server to Network Bridge

  - by Luke

  My wireless router died, so I decided to route everything through my server. So I installed a second NIC and a wireless card to be my new network: 1 NIC to the Modem, 1 NIC to the switch, and the Wireless to... Well, wireless. Anyways, I got far enough to get DHCP to work on just ONE adapter when I used Internet Connection Sharing (I couldn't get RRAS set up for the life of me), then I decided to try bridging the wireless and second NIC. Now, the DHCP server won't bind to the bridge, but I can enter manual IP's in my clients and it'll connect to the Internet. I also tried changing my wireless adapter's IP to 192.168.0.2, and to 192.168.1.1 to try to set up a separate scope, but to no avail. Running Windows Server 2003

  Read the article

• GoodFil.ms Suggests New Movies Based on Friends’ Picks

  - by Jason Fitzpatrick

  Goodfil.ms is a movie suggestion engine that doesn’t suggest movies based on what the critics say or how many anonymous internet points a movie has received, but instead takes into account your personal tastes and the tastes of your friends. From the Goodfil.ms FAQ: Films are social. The best way to find movies is through the people you know. We’ve designed Goodfilms from the ground up to show you what your existing friends are watching and rating, and to focus on showing you what the people around you think about films instead of a random grab bag of “internet voters” or highly specialised critics. Their FAQ file is filled with links to detailed posts about the specifics of the process, so if you’re the curious type we strongly suggest checking it out. In addition to the social-ranking side of Goodfil.ms there’s an excellent “Recent Releases” section for major streaming services like iTunes, Netflix, and Amazon Prime–even if you don’t sign up for the social side of the site you can still keep an eye on the best new releases across the board. What To Do If You Get a Virus on Your Computer Why Enabling “Do Not Track” Doesn’t Stop You From Being Tracked HTG Explains: What is the Windows Page File and Should You Disable It?

  Read the article

• Stop Cisco AnyConnect from locking down the NIC

  - by Johannes Rössel

  Cisco's VPN crapclients (including the AnyConnect one) have the nasty habit of clobbering all NICs on the system you're using them. The old client had a checkbox in the connection options that allowed you to use other network interfaces while being connected while the AnyConnect client doesn't have any options at all, seemingly. But they both lock down the network interface they are using to connect to the VPN. Since I am forced to use AnyConnect to actually have an internet connection and I like to control a second computer at home via RDP (over the same network interface so far) this doesn't quite work out. With the old client IPv6 still worked just fine, though AnyConnect seems to dislike that as well now. Is there any way to still use the same network interface for LAN access? I actually don't really care about any possible security implications (which might be why Cisco does this) as it's my freaking internet connection and not a secure way of working from home. The trade-off is quite different :-)

  Read the article

• pfsense multi-site VPN VOIP deployment

  - by sysconfig

  have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

  Read the article

• Use Any Folder For Your Ubuntu Desktop (Even a Dropbox Folder)

  - by Trevor Bekolay

  By default, Ubuntu creates a folder called Desktop in your home directory that gets displayed on your desktop. What if you want to use something else, like your Dropbox folder? Here we look at how to use any folder for your desktop. Not only can you change your desktop folder, you can change the location of any other folder Ubuntu creates for you in your home folder, like Documents or Music – and this works in any Linux distribution using the Gnome desktop manager. In this example, we’re going to change desktop to show our Dropbox folder. Open your home folder in a File Browser by clicking on Places > Home Folder. In the Home Folder, open the .config folder. By default, .config is hidden, so you may have to show hidden folders (temporarily) by clicking on View > Show Hidden Files. Then open the .config folder by double-clicking on it. Now open the user-dirs.dirs file… If double-clicking on it does not open it in a text editor, right-click on it and choose Open with Other Application… and find a text editor like Gedit. Change the entry associated with XDG_DESKTOP_DIR to the folder you want to be shown as your desktop. In our case, this is $HOME/Dropbox. Note: The “~” shortcut for the home directory won’t work in this file (use $HOME for that), but an absolute path (i.e. a path starting with “/”) will work. Feel free to change the locations of the other folders as well. Save and close user-dirs.dirs. At this point you can either log off and then log back on to get your desktop back, or open a terminal window Applications > Accessories > Terminal and enter: killall nautilus Nautilus (the file manager in Gnome) will restart itself and display your newly chosen folder as the desktop! This is a cool trick to use any folder for your Ubuntu desktop. What did you use as your desktop folder? Let us know in the comments! Similar Articles Productive Geek Tips Sync Your Pidgin Profile Across Multiple PCs with DropboxAdd "My Dropbox" to Your Windows 7 Start MenuCreate a Keyboard Shortcut to Access Hidden Desktop Icons and FilesAdd "My Computer" to Your Windows 7 / Vista TaskbarCheck your Disk Usage on Ubuntu with Disk Usage Analyzer TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Use Flixtime To Create Video Slideshows Creating a Password Reset Disk in Windows Bypass Waiting Time On Customer Service Calls With Lucyphone MELTUP – "The Beginning Of US Currency Crisis And Hyperinflation" Enable or Disable the Task Manager Using TaskMgrED Explorer++ is a Worthy Windows Explorer Alternative

  Read the article

• Performance problem with an Intel Wireless 5100

  - by Piet

  I just installed 12.04 on a HP Elitebook 2530p. The performance with wireless connection to an Eminem 4551 is very bad. Wired connection just works great. If I connect to my router (Eminent 4551) wired I have a good performance accessing internet pages with Firefox. When I try to access the same internet pages wireless I get a real bad performance. piet@piet-HP-EliteBook-2530p:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07) 00:03.2 IDE interface: Intel Corporation Mobile 4 Series Chipset PT IDER Controller (rev 07) 00:03.3 Serial controller: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection (rev 07) 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 02:00.0 Network controller: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection 44:06.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 44:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) piet@piet-HP-EliteBook-2530p:~$

  Read the article

• How to Make Your Verizon FIOS Router 1000% More Secure

  - by The Geek

  If you’ve just switched to Verizon FIOS and they’ve installed the new router in your house, there’s just one problem: it’s set to use lousy WEP encryption by default, instead of the much more secure WPA2. Here’s how to fix it. The problem with WEP encryption is that it can be cracked really easily—a skilled hacker can do it in a few minutes, and even an unskilled geek can do it in just a little more time with the right tools. Once they’ve done that, they can leech off your internet connection and do anything they want—including illegal stuff coming from your network. Note: if you are using an old Nintendo DS connected to the internet, they usually only support WEP encryption, so you may not want to do this Latest Features How-To Geek ETC The Complete List of iPad Tips, Tricks, and Tutorials The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor The Spam Police Parts 1 and 2 – Goodbye Spammers [Videos] Snow Angels Theme for Windows 7 Exploring the Jungle Ruins Wallpaper Protect Your Privacy When Browsing with Chrome and Iron Browser Free Shipping Day is Friday, December 17, 2010 – National Free Shipping Day Find an Applicable Quote for Any Programming Situation

  Read the article

• Java Resources for Windows Azure

  - by BuckWoody

  Windows Azure is a Platform as a Service – a PaaS – that runs code you write. That code doesn’t just mean the languages on the .NET platform – you can run code from multiple languages, including Java. In fact, you can develop for Windows and SQL Azure using not only Visual Studio but the Eclipse Integrated Development Environment (IDE) as well.  Although not an exhaustive list, here are several links that deal with Java and Windows Azure: Resource Link Windows Azure Java Development Center http://www.windowsazure.com/en-us/develop/java/  Java Development Guidance http://msdn.microsoft.com/en-us/library/hh690943(VS.103).aspx  Running a Java Environment on Windows Azure http://blogs.technet.com/b/port25/archive/2010/10/28/running-a-java-environment-on-windows-azure.aspx  Running a Java Environment on Windows Azure http://blogs.technet.com/b/port25/archive/2010/10/28/running-a-java-environment-on-windows-azure.aspx  Run Java with Jetty in Windows Azure http://blogs.msdn.com/b/dachou/archive/2010/03/21/run-java-with-jetty-in-windows-azure.aspx  Using the plugin for Eclipse http://blogs.msdn.com/b/craig/archive/2011/03/22/new-plugin-for-eclipse-to-get-java-developers-off-the-ground-with-windows-azure.aspx  Run Java with GlassFish in Windows Azure http://blogs.msdn.com/b/dachou/archive/2011/01/17/run-java-with-glassfish-in-windows-azure.aspx  Improving experience for Java developers with Windows  Azure http://blogs.msdn.com/b/interoperability/archive/2011/02/23/improving-experience-for-java-developers-with-windows-azure.aspx  Java Access to SQL Azure via the JDBC Driver for SQL  Server http://blogs.msdn.com/b/brian_swan/archive/2011/03/29/java-access-to-sql-azure-via-the-jdbc-driver-for-sql-server.aspx  How to Get Started with Java, Tomcat on Windows Azure http://blogs.msdn.com/b/usisvde/archive/2011/03/04/how-to-get-started-with-java-tomcat-on-windows-azure.aspx  Deploying Java Applications in Azure http://blogs.msdn.com/b/mariok/archive/2011/01/05/deploying-java-applications-in-azure.aspx  Using the Windows Azure Storage Explorer in Eclipse http://blogs.msdn.com/b/brian_swan/archive/2011/01/11/using-the-windows-azure-storage-explorer-in-eclipse.aspx  Windows Azure Tomcat Solution Accelerator http://archive.msdn.microsoft.com/winazuretomcat  Deploying a Java application to Windows Azure with  Command-line Ant http://java.interoperabilitybridges.com/articles/deploying-a-java-application-to-windows-azure-with-command-line-ant  Video: Open in the Cloud: Windows Azure and Java http://channel9.msdn.com/Events/PDC/PDC10/CS10  AzureRunMe  http://azurerunme.codeplex.com/  Windows Azure SDK for Java http://www.interoperabilitybridges.com/projects/windows-azure-sdk-for-java  AppFabric SDK for Java http://www.interoperabilitybridges.com/projects/azure-java-sdk-for-net-services  Information Cards for Java http://www.interoperabilitybridges.com/projects/information-card-for-java  Apache Stonehenge http://www.interoperabilitybridges.com/projects/apache-stonehenge  Channel 9 Case Study on Java and Windows Azure http://www.microsoft.com/casestudies/Windows-Azure/Gigaspaces/Solution-Provider-Streamlines-Java-Application-Deployment-in-the-Cloud/400000000081   

  Read the article

• Trying to use HUAWEI E173 on Ubuntu 12.04

  - by Scott Warren

  I have a HUAWEI E173 usb stick to access the internet. It works normally on windows but I need to use it on my Ubuntu system. I plug it in, and after 25-20 seconds the status light turns green and blinks twice every 3 seconds. I see no changes in my system whatsoever, nothing gets installed, I don't get prompted for my PIN. I tried to create a connection using edit connections. I entered the following parameters: Turkey, Turkcell, My Plan is not listed, Internet. Nothing happens. I tried the lsusb command and got the following: tosh2000@tosh:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 058f:a001 Alcor Micro Corp. Bus 001 Device 004: ID 12d1:14ba Huawei Technologies Co., Ltd. I tried the usb-devices command and can see the device: T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=12d1 ProdID=14ba Rev=00.00 S: Manufacturer=HUAWEI Technology S: Product=HUAWEI Mobile C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage I: If#= 1 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage Based on other advice I found, I tried the following command: sudo modprobe usbserial vendor=0x12d1 product=0x14ba Again, nothing happened. My question is why does the "enable mobile broadband" not populate automatically in the dropdown networking menu and how can I can I start using the device? Thank you.

  Read the article

• MTU, DSL router and stalling TCP

  - by user38843

  I am discovering stalling TCP connection problem. The problem arises when I try to scp stuff from remote system from my home network. My home network is connected to internet via PPPoE (ADSL+) and everything works perfectly once working from my home network. The ADSL router has MTU set to 1492 but with that setting the scp from remote system does not work - stalling! When I change the MTU on my router to 1500 the that scp works perfectly but internet accesses from my home network is very slow to most of the www sites - even local ones. Just wondering where the problem exists - my ISP blocking ICMP, etc? Thanks!

  Read the article

• O que é Social Cloud ou computação em nuvem social?

  - by RED League Heroes-Oracle

  A computação em nuvem está criando novas possiblidades para as empresas em seus negócios, como aproximar-se dos clientes através de ferramentas digitais. Cruzar informações do registro dos clientes armazenadas nos servidores da empresa, com informações sociais, ou seja, com informações disponíveis na internet (redes sociais, blogs, geolocalização). Este cruzamento, certamente, pode ajudar a entender melhor o comportamento de seus consumidores e, através destas análises, realizar diferentes ações para estar cada vez mais próximo ou entender novas necessidades. O comportamento de consumo vem se alterando com o avanço da internet e das novas tecnologias. Integrar estas novas tecnologias ao negócio da empresa é uma grande oportunidade para acompanhar os consumidores e observar novos padrões comportamentais. Estes novos padrões podem apresentar novas oportunidades. Utilizar a computação em nuvem para agregar conhecimento adicional aos que já o possuem pode ser uma das chaves para a transformação da realidade da empresa. Atualmente, como seus consumidores se comportam? O que eles costumam fazer? Viajam mensalmente? Possuem filhos? Estão em busca de novos produtos? Quais produtos buscam? Onde a maior parte de seus consumidores está na hora do lazer? Saber onde estão na hora do lazer pode ser uma ótima oportunidade para que sua marca seja vista! Como você endereça hoje essas questões? As soluções de Social Cloud da Oracle podem te auxiliar! Aproveite e baixe gratuitamenteo e-book – Simplifique sua mobilidade empresarial. E conheça o poder transformacional da mobilidade em seu negócio. LINK PARA DOWNLOAD: http://bit.ly/e-bookmobilidade

  Read the article

• Question about Remote WAN IP on NetGear FVS336G VPN setup

  - by camilian

  I wanted to be able to have a VPN connection to my home network so I purchased the FVS336G because the reviews said it was easy set up. I am sure it is for someone that knows what needs to be entered it is easy, but I am a little confused. Using the VPN wizard I choose VPN Client as the tunnel connection, enter key, etc... but then I get to the "What is the remote WAN's IP or Internet Name" and "What is the local WAN's IP address or Internet Name" I am lost. I am probably being really dumb, but I am not sure what I need to put in here. Is the remote WAN ip the ip from the outside world to my cable modem? Is the local ip the ip to my FVS336G? Any help would be appreciated.

  Read the article

• Virus disturbing my audio

  - by Mike M

  i had a desktop.ini virus on my computer. I managed to get rid of it (i think) but now my Mcafee firewall will not stay on for more than 3 secs before it turns off again. Also something is freezing my computer for a few secs when a window is open, also my audio goes in and out when watching videos and listening to music. I figured out that it only happens when i connect to the internet. I have to restart my PC and quickly disconnect the internet if i want to listen to music. also i have vista

  Read the article

• Using Static Public IPs and Private DHCP IPs on the Same Router

  - by Andrew Larsson

  I have a subnet of public IP addresses that my ISP has provided me with. They are routed through my router (how profound) that has a a static IP. I have successfully assigned the IPs from that subnet to various devices on my network. This works just fine, they get their own public IP, they can access the Internet, and the Internet can access them. However, I would like to also assign some private IPs on my network through that same router and put them behind NAT. Is this even possible? Could a VLAN be of use? I would like to avoid putting another router on the network, which makes this is quite an awkward question.

  Read the article

• Will being a VPN Client interrupt web pages hosted by IIS?

  - by f1gm3nt3d

  We have a dedicated server that is primarily used to host our website. I've been tasked with determining the feasibility of setting up a VPN connection from it to our Internal Network at our offices for a few ease of use purposes. My concern is that if I establish this VPN connection our Website will only be available internally and not to the internet in general. I'm concerned about this because in everything I read the fact is stated that by default all network traffic is routed over the VPN connection when it's established, is this also true for applications such as IIS that are listening for incoming connections? TL;DR Will having a VPN Client up and running cause a problem with server applications that may be listening on the NIC connected to the Internet due to changes that VPN makes in the routing tables?

  Read the article

• .NET Mailserver smtp/relay problem

  - by Quandary

  Question, I'm trying to setup my own mailserver: This is the server (latest version): http://www.codeproject.com/KB/vista/SMTP_POP3_IMAP_server.aspx Now I've the following problem: I can add user accounts, and receive mails from the internet in that account. I can also setup a mailinglist. This works fine (for local users). But I can't send any emails out... Why ? I've forwarded port 25 + 110, and it works fine for receiving mails from the internet. Do I need to configure SMTP under SMTP, or under relay, or both ? Or do I miss anything ?

  Read the article

• pfsense multi-site VPN VOIP deployment

  - by sysconfig

  have main office pfsense firewall configured like this: local networks WAN - internet LAN - local network VOIP - IP phones need to connect remote offices (multi-users) and single remote users (from home) use IPSEC or OpenVPN to build "permanent" automatically connecting tunnels from remote location to main location. in remote locations, network will look like this: WAN - internet LAN - local network multiple users VOIP - multiple IP phones in order for the IP phones to work they have to be able to "see" the VOIP network and the VOIP server back at the main office for single remote users ( like from home ) the setup will be similar but only one phone and one computer so questions: best way to tie networks together? IPSEC or OpenVPN can this be setup to automatically connect ? any issues/suggestions with that design/topology ? QoS or issues with running the VOIP traffic over a VPN throughput, quality etc.. obviously depends on remote locations connection to some degree

  Read the article

< Previous Page | 441 442 443 444 445 446 447 448 449 450 451 452  | Next Page >